1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE 2 # 3 # This version of terminfo.src is distributed with ncurses and is maintained 4 # by Thomas E. Dickey (TD). 5 # 6 # Report bugs and new terminal descriptions to 7 # bug-ncurses (at] gnu.org 8 # 9 # Revision: 1.1083 10 # Date: 2023/12/09 18:07:12 11 # 12 # The original header is preserved below for reference. It is noted that there 13 # is a "newer" version which differs in some cosmetic details (but actually 14 # stopped updates several years ago); we have decided to not change the header 15 # unless there is also a change in content. 16 # 17 # To further muddy the waters, it is noted that changes to this file as part of 18 # maintenance of ncurses (since 1996) are generally conceded to be copyright 19 # under the ncurses MIT-style license. That was the effect of the agreement 20 # which the principal authors of ncurses made in 1998. However, since much of 21 # the file itself is of unknown authorship (and the disclaimer below makes it 22 # obvious that Raymond cannot or will not convey rights over those parts), 23 # there is no explicit copyright notice on the file itself. 24 # 25 # It would also be a nuisance to split the file into unknown/known authorship 26 # and move pieces as they are maintained, since many of the maintenance changes 27 # have been small corrections to Raymond's translations to/from termcap format, 28 # correcting the data but not the accompanying annotations. 29 # 30 # In any case, note that almost half of this file is not data but annotations 31 # which reflect creative effort. Furthermore, the structure of entries to 32 # reuse common chunks also is creative (and subject to copyright). Finally, 33 # some portions of the data are derivative work under a compatible MIT-style 34 # license from xterm. 35 # 36 #------------------------------------------------------------------------------ 37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying 38 # https://invisible-island.net/personal/copyrights.html#removing_notes 39 #------------------------------------------------------------------------------ 40 # 41 # Version 10.2.1 42 # terminfo syntax 43 # 44 # Eric S. Raymond (current maintainer) 45 # John Kunze, Berkeley 46 # Craig Leres, Berkeley 47 # 48 # Please e-mail changes to terminfo (at] thyrsus.com; the old termcap (at] berkeley.edu 49 # address is no longer valid. The latest version can always be found at 50 # <http://www.tuxedo.org/terminfo>. 51 # 52 # PURPOSE OF THIS FILE: 53 # 54 # This file describes the capabilities of various character-cell terminals, 55 # as needed by software such as screen-oriented editors. 56 # 57 # Other terminfo and termcap files exist, supported by various OS vendors 58 # or as relics of various older versions of UNIX. This one is the longest 59 # and most comprehensive one in existence. It subsumes not only the entirety 60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL 61 # termcap file, but also large numbers of vendor-maintained termcap and 62 # terminfo entries more complete and carefully tested than those in historical 63 # termcap/terminfo versions. 64 # 65 # Pointers to related resources (including the ncurses distribution) may 66 # be found at <http://www.tuxedo.org/terminfo>. 67 # 68 # INTERNATIONALIZATION: 69 # 70 # This file uses only the US-ASCII character set (no ISO8859 characters). 71 # 72 # This file assumes a US-ASCII character set. If you need to fix this, start 73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers 74 # for your character set. \E(A and \E)A enables the British character set 75 # with the pound sign at position 2/3. 76 # 77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS, 78 # C1 characters are considered the first-byte set of the Japanese encodings, 79 # so \E)0 should be avoided in <enacs> and initialization strings. 80 # 81 # FILE FORMAT: 82 # 83 # The version you are looking at may be in any of three formats: master 84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell 85 # which by the format given in the header above. 86 # 87 # The master format is accepted and generated by the terminfo tools in the 88 # ncurses suite; it differs from stock (System V-compatible) terminfo only 89 # in that it admits a group of capabilities (prefixed `OT') equivalent to 90 # various obsolete termcap capabilities. You can, thus, convert from master 91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if 92 # you have ncurses `tic -I' is nicer (among other things, it automatically 93 # outputs entries in a canonical form). 94 # 95 # The termcap version is generated automatically from the master version 96 # using tic -C. This filtering leaves in the OT capabilities under their 97 # original termcap names. All translated entries fit within the 1023-byte 98 # string-table limit of archaic termcap libraries except where explicitly 99 # noted below. Note that the termcap translation assumes that your termcap 100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this 101 # capability. Older versions of GNU termcap, through 1.3, do not. 102 # 103 # For details on these formats, see terminfo(5) in the ncurses distribution, 104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD 105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources 106 # as of June 1995; they are encouraging everyone to migrate to ncurses. 107 # 108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's), 109 # no entry in this file has embedded comments. This is so source translation 110 # to termcap only has to carry over leading comments. Also, no name field 111 # contains embedded whitespace (such whitespace confuses rdist). 112 # 113 # Further note: older versions of this file were often installed with an editor 114 # script (reorder) that moved the most common terminal types to the front of 115 # the file. This should no longer be necessary, as the file is now ordered 116 # roughly by type frequency with ANSI/VT100 and other common types up front. 117 # 118 # Some information has been merged in from terminfo files distributed by 119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information 120 # comes from vendors who maintain official terminfos for their hardware 121 # (notably DEC and Wyse). 122 # 123 # A detailed change history is included at the end of this file. 124 # 125 # FILE ORGANIZATION: 126 # 127 # Comments in this file begin with # - they cannot appear in the middle 128 # of a terminfo/termcap entry (this feature had to be sacrificed in order 129 # to allow standard terminfo and termcap syntax to be generated cleanly from 130 # the master format). Individual capabilities are commented out by 131 # placing a period between the colon and the capability name. 132 # 133 # The file is divided up into major sections (headed by lines beginning with 134 # the string "########") and minor sections (beginning with "####"); do 135 # 136 # grep "^####" <file> | more 137 # 138 # to see a listing of section headings. The intent of the divisions is 139 # (a) to make it easier to find things, and (b) to order the database so 140 # that important and frequently-encountered terminal types are near the 141 # front (so that you'll get reasonable search efficiency from a linear 142 # search of the termcap form even if you don't use reorder). Minor sections 143 # usually correspond to manufacturers or standard terminal classes. 144 # Parenthesized words following manufacturer names are type prefixes or 145 # product line names used by that manufacturers. 146 # 147 # HOW TO READ THE ENTRIES: 148 # 149 # The first name in an entry is the canonical name for the model or 150 # type, last entry is a verbose description. Others are mnemonic synonyms for 151 # the terminal. 152 # 153 # Terminal names look like <manufacturer> <model> - <modes/options> 154 # The part to the left of the dash, if a dash is present, describes the 155 # particular hardware of the terminal. The part to the right may be used 156 # for flags indicating special ROMs, extra memory, particular terminal modes, 157 # or user preferences. 158 # 159 # All names should be in lower case, for consistency in typing. 160 # 161 # The following are conventionally used suffixes: 162 # -2p Has two pages of memory. Likewise 4p, 8p, etc. 163 # -am Enable auto-margin. 164 # -m Monochrome. Suppress color support 165 # -mc Magic-cookie. Some terminals (notably older Wyses) can 166 # only support one attribute without magic-cookie lossage. 167 # Their base entry is usually paired with another that 168 # uses magic cookies to support multiple attributes. 169 # -nam No auto-margin - suppress <am> capability 170 # -nl No labels - suppress soft labels 171 # -ns No status line - suppress status line 172 # -rv Terminal in reverse video mode (black on white) 173 # -s Enable status line. 174 # -vb Use visible bell (<flash>) rather than <bel>. 175 # -w Wide - in 132 column mode. 176 # If a name has multiple suffixes and one is a line height, that one should 177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. 178 # 179 # Entries with embedded plus signs are designed to be included through use/tc 180 # capabilities, not used as standalone entries. 181 # 182 # To avoid search clashes, some older all-numeric names for terminals have 183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). 184 # All primary names of terminals now have alphanumeric prefixes. 185 # 186 # Comments marked "esr" are mostly results of applying the termcap-compiler 187 # code packaged with ncurses and contemplating the resulting error messages. 188 # In many cases, these indicated obvious fixes to syntax garbled by the 189 # composers. In a few cases, I was able to deduce corrected forms for garbled 190 # capabilities by looking at context. All the information in the original 191 # entries is preserved in the comments. 192 # 193 # In the comments, terminfo capability names are bracketed with <> (angle 194 # brackets). Termcap capability names are bracketed with :: (colons). 195 # 196 # INTERPRETATION OF USER CAPABILITIES 197 # 198 # The System V Release 4 and XPG4 terminfo format defines ten string 199 # capabilities for use by applications, <u0>...<u9>. In this file, we use 200 # certain of these capabilities to describe functions which are not covered 201 # by terminfo. The mapping is as follows: 202 # 203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) 204 # u8 terminal answerback description 205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) 206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) 207 # 208 # The terminal enquire string <u9> should elicit an answerback response 209 # from the terminal. Common values for <u9> will be ^E (on older ASCII 210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). 211 # 212 # The cursor position request (<u7>) string should elicit a cursor position 213 # report. A typical value (for VT100 terminals) is \E[6n. 214 # 215 # The terminal answerback description (u8) must consist of an expected 216 # answerback string. The string may contain the following scanf(3)-like 217 # escapes: 218 # 219 # %c Accept any character 220 # %[...] Accept any number of characters in the given set 221 # 222 # The cursor position report (<u6>) string must contain two scanf(3)-style 223 # %d format elements. The first of these must correspond to the Y coordinate 224 # and the second to the %d. If the string contains the sequence %i, it is 225 # taken as an instruction to decrement each value after reading it (this is 226 # the inverse sense from the cup string). The typical CPR value is 227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). 228 # 229 # These capabilities are used by tack(1m), the terminfo action checker 230 # (distributed with ncurses 5.0). 231 # 232 # TABSET FILES 233 # 234 # All the entries in this file have been edited to assume that the tabset 235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy 236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun) 237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. 238 # 239 # No curses package we know of actually uses these files. If their location 240 # is an issue, you will have to hand-patch the file locations before compiling 241 # this file. 242 # 243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL 244 # 245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as 246 # character-cell terminals are increasingly replaced by X displays, much of 247 # this file is becoming a historical document (this is part of the reason for 248 # the new organization, which puts ANSI types, xterm, Unix consoles, 249 # and vt100 up front in confidence that this will catch 95% of new hardware). 250 # 251 # For the terminal types still alive, I'd like to have manufacturer's 252 # contact data (Internet address and/or snail-mail + phone). 253 # 254 # I'm also interested in enriching the comments so that the latter portions of 255 # the file do in fact become a potted history of VDT technology as seen by 256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to 257 # include its live/dead/out-of-the-business status, and for as many 258 # terminal types as possible to be tagged with information like years 259 # of heaviest use, popularity, and interesting features. 260 # 261 # I'm especially interested in identifying the obscure entries listed under 262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal 263 # wisdom about them gets lost. If you know a lot about obscure old terminals, 264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and 265 # eyeball it for things you can identify and describe. 266 # 267 # If you have been around long enough to contribute, please read the file 268 # with this in mind and send me your annotations. 269 # 270 # COPYRIGHTS AND OTHER DELUSIONS 271 # 272 # The BSD ancestor of this file had a standard Regents of the University of 273 # California copyright with dates from 1980 to 1993. 274 # 275 # Some information has been merged in from a terminfo file SCO distributes. 276 # It has an obnoxious boilerplate copyright which I'm ignoring because they 277 # took so much of the content from the ancestral BSD versions of this file 278 # and didn't attribute it, thereby violating the BSD Regents' copyright. 279 # 280 # Not that anyone should care. However many valid functions copyrights may 281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous 282 # contributors makes about as much sense as copyrighting a wall-full of 283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. 284 # 285 # This file deliberately has no copyright. It belongs to no one and everyone. 286 # If you claim you own it, you will merely succeed in looking like a fool. 287 # Use it as you like. Use it at your own risk. Copy and redistribute freely. 288 # There are no guarantees anywhere. Svaha! 289 # 290 291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES 292 # 293 # This section describes terminal classes and brands that are still 294 # quite common. 295 # 296 297 #### Specials 298 # 299 # Special "terminals". These are used to label tty lines when you don't 300 # know what kind of terminal is on it. The characteristics of an unknown 301 # terminal are the lowest common denominator - they look about like a ti 700. 302 # 303 304 dumb|80-column dumb tty, 305 am, 306 cols#80, 307 bel=^G, cr=\r, cud1=\n, ind=\n, 308 unknown|unknown terminal type, 309 gn, use=dumb, 310 lpr|printer|line printer, 311 OTbs, hc, os, 312 cols#132, lines#66, 313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n, 314 glasstty|classic glass tty interpreting ASCII control characters, 315 OTbs, am, 316 cols#80, 317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H, 318 kcud1=\n, nel=\r\n, .kbs=^H, 319 320 vanilla|dumb tty, 321 OTbs, 322 bel=^G, cr=\r, cud1=\n, ind=\n, 323 324 # This is almost the same as "dumb", but with no prespecified width. 325 # DEL and ^C are hardcoded to act as kill characters. 326 # ^D acts as a line break (just like newline). 327 # It also interprets 328 # \033];xxx\007 329 # for compatibility with xterm -TD 330 9term|Plan9 terminal emulator for X, 331 am, 332 OTnl=\n, bel=^G, cud1=\n, 333 334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities 335 # 336 # See the end-of-file comment for more on these. 337 # 338 339 # ANSI capabilities are broken up into pieces, so that a terminal 340 # implementing some ANSI subset can use many of them. 341 ansi+local1|ANSI normal-mode cursor-keys, 342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 343 ansi+local|ANSI normal-mode parameterized cursor-keys, 344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 345 cuu=\E[%p1%dA, use=ansi+local1, 346 ansi+tabs|ANSI tab-stops, 347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g, 348 ansi+inittabs|ANSI initial tab-stops, 349 it#8, use=ansi+tabs, 350 ansi+erase|ANSI clear screen/line, 351 clear=\E[H\E[J, ed=\E[J, el=\E[K, 352 ansi+rca|ANSI relative cursor-addressing (1-based), 353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, 354 ansi+rca2|ANSI relative cursor-addressing, 355 hpa=\E[%i%p1%dG, vpa=\E[%i%p1%dd, 356 ansi+cup|ANSI absolute cursor-addressing, 357 cup=\E[%i%p1%d;%p2%dH, home=\E[H, 358 ansi+rep|ANSI repeat-character, 359 rep=%p1%c\E[%p2%{1}%-%db, 360 ansi+idl1|ANSI insert/delete one line, 361 dl1=\E[M, il1=\E[L, 362 ansi+idl|ANSI insert/delete lines, 363 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, 364 ansi+idc1|ANSI insert/delete one character, 365 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h, 366 ansi+idc|ANSI insert/delete characters, 367 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1, 368 ansi+arrows|ANSI normal-mode home and cursor-keys, 369 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 370 khome=\E[H, 371 ansi+apparrows|ANSI application-mode home and cursor-keys, 372 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\EOH, 373 use=ansi+arrows, 374 ansi+sgr|ANSI graphic renditions, 375 blink=\E[5m, invis=\E[8m, rev=\E[7m, 376 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 377 sgr0=\E[0m, 378 ansi+sgrso|ANSI standout only, 379 rmso=\E[m, smso=\E[7m, 380 ansi+sgrul|ANSI underline only, 381 rmul=\E[m, smul=\E[4m, 382 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim, 383 bold=\E[1m, 384 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1; 385 %;%?%p7%t8;%;m, 386 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 387 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold, 388 dim=\E[2m, 389 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2; 390 %;%?%p7%t8;%;m, 391 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 392 393 # ECMA-48 does not specify scroll-regions, but most people consider it to be 394 # "ANSI" because it is widely-supported. See ecma+index for the standard form. 395 ansi+csr|ANSI scroll-region plus cursor save & restore, 396 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, 397 398 # The normal (ANSI) flavor of "media copy" building block asserts that 399 # characters sent to the printer do not echo on the screen. DEC terminals 400 # can also be put into autoprinter mode, where each line is sent to the 401 # printer as you move off that line, e.g., by a carriage return. 402 ansi+pp|ANSI printer port, 403 mc5i, 404 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, 405 dec+pp|DEC autoprinter mode, 406 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, 407 408 # The IBM PC alternate character set. Plug this into any Intel console entry. 409 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the 410 # ROM graphics for control characters such as the diamond, up- and down-arrow. 411 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this 412 # will work with any Intel console, they all seem to have inherited \E[11m 413 # from the ANSI.SYS de-facto standard. 414 klone+acs|alternate character set for ansi.sys displays, 415 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 416 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 417 \301w\302x\263y\363z\362{\343|\330}\234~\376, 418 rmacs=\E[10m, smacs=\E[11m, 419 420 # Highlight controls corresponding to the ANSI.SYS standard. Most 421 # console drivers for Intel boxes obey these. Makes the same assumption 422 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, 423 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. 424 klone+sgr|attribute control for ansi.sys displays, 425 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, 426 rmso=\E[m, rmul=\E[m, 427 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 428 %t;1%;%?%p9%t;11%;m, 429 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 430 use=klone+acs, 431 432 # Most Intel boxes do not treat "invis" (invisible) text. 433 klone+sgr8|attribute control for ansi.sys displays with invis, 434 invis=\E[8m, 435 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 436 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 437 use=klone+sgr, 438 439 # Highlight controls corresponding to the ANSI.SYS standard. *All* 440 # console drivers for Intel boxes obey these. Does not assume \E[11m will 441 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS 442 # diamond and arrow characters under curses. 443 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), 444 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, 445 rmul=\E[m, 446 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 447 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 448 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 449 use=klone+acs, 450 451 # KOI8-R (RFC1489) acs (alternate character set) 452 # From: Qing Long <qinglong (at] Bolizm.ihep.su>, 24 Feb 1996. 453 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, 454 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i 455 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t 456 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~ 457 \225, 458 rmacs=\E[10m, smacs=\E[11m, 459 460 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence 461 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer 462 # but equivalent strings that don't rely on that coincidence: 463 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 464 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 465 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. 466 # They match a subset of ECMA-48. 467 klone+color|color control for ansi.sys and ISO6429-compatible displays, 468 colors#8, ncv#3, pairs#64, 469 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 470 471 # This is better than klone+color, it doesn't assume white-on-black as the 472 # default color pair, but many `ANSI' terminals don't grok the <op> cap. 473 ecma+color|color control for ECMA-48-compatible terminals, 474 AX, 475 colors#8, ncv#3, pairs#64, 476 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 477 478 ecma+italics|ECMA-48 italics, 479 ritm=\E[23m, sitm=\E[3m, 480 481 # Attribute control for ECMA-48-compatible terminals 482 ecma+sgr|attribute capabilities for true ECMA-48 terminals, 483 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, 484 485 ecma+strikeout|ECMA-48 strikeout/crossed-out, 486 rmxx=\E[29m, smxx=\E[9m, 487 488 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its 489 # own variation. 490 ecma+index|ECMA-48 scroll up/down, 491 indn=\E[%p1%dS, rin=\E[%p1%dT, 492 493 # For comparison, here are all the capabilities implied by the Intel 494 # Binary Compatibility Standard (level 2) that fit within terminfo. 495 # For more detail on this rather pathetic standard, see the comments 496 # near the end of this file. 497 ibcs2|Intel Binary Compatibility Standard prescriptions, 498 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D, 499 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 500 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 501 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, 502 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 503 il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h, 504 tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index, 505 506 #### ANSI/ECMA-48 terminals and terminal emulators 507 # 508 # See near the end of this file for details on ANSI conformance. 509 # Don't mess with these entries! Lots of other entries depend on them! 510 # 511 # This section lists entries in a least-capable to most-capable order. 512 # if you're in doubt about what `ANSI' matches yours, try them in that 513 # order and back off from the first that breaks. 514 515 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing 516 # and more than one page of memory. It uses local motions instead of 517 # direct cursor addressing, and makes almost no assumptions. It does 518 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. 519 ansi-mr|mem rel cup ANSI, 520 am, xon, 521 cols#80, lines#24, use=vanilla, use=ansi+erase, 522 use=ansi+local1, 523 524 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but 525 # beware of screen size problems and memory relative cursor addressing. 526 ansi-mini|any ANSI terminal with pessimistic assumptions, 527 am, xon, 528 cols#80, lines#24, use=vanilla, use=ansi+cup, 529 use=ansi+erase, 530 531 # ansi-mtabs adds relative addressing and minimal tab support 532 ansi-mtabs|any ANSI terminal with pessimistic assumptions (relative addressing), 533 it#8, 534 ht=^I, use=ansi-mini, use=ansi+local1, 535 536 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL 537 # 538 # The following is an entry for the full ANSI 3.64 (1977). It lacks 539 # padding, but most terminals using the standard are "fast" enough 540 # not to require any -- even at 9600 bps. If you encounter problems, 541 # try including the padding specifications. 542 # 543 # Note: the :as: and :ae: specifications are not implemented here, for 544 # the available termcap documentation does not make clear WHICH alternate 545 # character set to specify. ANSI 3.64 seems to make allowances for several. 546 # Please make the appropriate adjustments to fit your needs -- that is 547 # if you will be using alternate character sets. 548 # 549 # There are very few terminals running the full ANSI 3.64 standard, 550 # so I could only test this entry on one verified terminal (Visual 102). 551 # I would appreciate the results on other terminals sent to me. 552 # 553 # Please report comments, changes, and problems to: 554 # 555 # U.S. MAIL: Hugh Hansard 556 # Box: 22830 557 # Emory University 558 # Atlanta, GA. 30322. 559 # 560 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. 561 # 562 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr) 563 ansi77|ANSI 3.64 standard 1977 version, 564 OTbs, am, mir, 565 cols#80, it#8, lines#24, 566 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr, 567 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 568 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 569 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 570 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 571 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, 572 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, 573 smso=\E[7m, smul=\E[4m, 574 575 # Procomm and some other ANSI emulations don't recognize all of the ANSI- 576 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 577 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 578 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to 579 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem 580 # to confuse many emulators. On the other hand, we can count on these programs 581 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 582 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under 583 # ANSI.SYS influence. 584 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> Oct 30 1995 585 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ANSI (mono mode), 586 OTbs, am, mir, msgr, 587 cols#80, it#8, lines#24, 588 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D, 589 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 590 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 591 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, 592 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g, 593 use=klone+sgr-dumb, 594 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), 595 lines#25, use=pcansi-m, 596 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), 597 lines#33, use=pcansi-m, 598 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), 599 lines#43, use=pcansi-m, 600 # The color versions. All PC emulators do color... 601 pcansi|ibm-pc terminal programs claiming to be ANSI, 602 use=klone+color, use=pcansi-m, 603 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, 604 lines#25, use=pcansi, 605 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, 606 lines#33, use=pcansi, 607 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, 608 lines#43, use=pcansi, 609 610 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. 611 # If you want pound signs rather than dollars, replace `B' with `A' 612 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. 613 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> Nov 6 1995 614 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, 615 mc5i, 616 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 617 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, 618 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, 619 ich=\E[%p1%d@, il=\E[%p1%dL, kcbt=\E[Z, kich1=\E[L, 620 mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, 621 rep=%p1%c\E[%p2%{1}%-%db, s0ds=\E(B, s1ds=\E)B, 622 s2ds=\E*B, s3ds=\E+B, vpa=\E[%i%p1%dd, use=ecma+index, 623 use=pcansi-m, 624 625 # ECMA-48 addresses three of the four capabilities here: 626 # 627 # u6 - 628 # 8.3.14 CPR - ACTIVE POSITION REPORT 629 # Notation: (Pn1;Pn2) Representation: CSI Pn1;Pn2 05/02 630 # Parameter default values: Pn1 = 1; Pn2 = 1 631 # 632 # u7 633 # 8.3.35 DSR - DEVICE ST A TUS REPORT 634 # Notation: (Ps) Representation: CSI Ps 06/14 635 # Parameter default value: Ps = 0 636 # DSR is used either to report the status of the sending device or to 637 # request a status report from the receiving device, depending on the 638 # parameter values: 639 # 6 a report of the active presentation position or of the active data 640 # position in the form of ACTIVE POSITION REPORT (CPR) is requested 641 # 642 # u9 - 643 # 8.3.24 DA - DEVICE ATTRIBUTES 644 # Notation: (Ps) Representation: CSI Ps 06/03 645 # Parameter default value: Ps = 0 646 # With a parameter value not equal to 0, DA is used to identify the 647 # device which sends the DA. The parameter value is a device type 648 # identification code according to a register which is to be established. 649 # If the parameter value is 0, DA is used to request an identifying DA 650 # from a device. 651 # 652 # DEC (and most "ANSI") terminals reply with a private-mode ("?") sequence, 653 # but that register "which is to be" in ECMA-48 was never established. 654 # For terminals that support DA1, a more specific u8 capability is preferred, 655 # except for those (such as xterm) which can be configured to return different 656 # responses. 657 ansi+cpr|ncurses extension for ANSI CPR, 658 u6=\E[%i%d;%dR, u7=\E[6n, 659 ansi+enq|ncurses extension for ANSI ENQ, 660 u8=\E[?%[;0123456789]c, u9=\E[c, use=ansi+cpr, 661 # DEC terminals provided DECID, subsumed into DA1: 662 decid+cpr|ncurses extension for DECID, 663 u8=\E[?%[;0123456789]c, u9=\EZ, use=ansi+cpr, 664 665 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in 666 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color. 667 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> Nov 6 1995 668 ansi|ansi/pc-term compatible with color, 669 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m, 670 671 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement 672 # all the normal ANSI stuff with no extensions. It assumes 673 # insert/delete line/char is there, so it won't work with 674 # VT100 clones. It assumes video attributes for bold, blink, 675 # underline, and reverse, which won't matter much if the terminal 676 # can't do some of those. Padding is assumed to be zero, which 677 # shouldn't hurt since xon/xoff is assumed. 678 ansi-generic|ansiterm|generic ANSI standard terminal, 679 am, xon, 680 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, 681 use=ansi+rca, use=ansi+erase, use=ansi+tabs, 682 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, 683 use=ansi+sgrbold, use=ansi+arrows, 684 685 #### DOS ANSI.SYS variants 686 # 687 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS 688 # documentation (except for the keyboard key reassignment feature, which 689 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid 690 # though undocumented. The <pfkey> capability is untested but should work for 691 # keys F1-F10 (%p1 values outside this range will yield unpredictable results). 692 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> Nov 7 1995 693 # 694 # DOS 2.0 (January 1983) documented these features in 695 # Chapter 13, "Using Extended Screen and Keyboard Control" -TD 696 ansi.sys-old|ANSI.SYS under PC-DOS 2.0, 697 OTbs, am, mir, msgr, xon, 698 cols#80, lines#25, 699 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 700 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, 701 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, 702 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u, 703 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, use=ansi+cpr, 704 use=klone+color, use=klone+sgr8, 705 706 # Keypad: Home=\0G Up=\0H PrPag=\0I 707 # ka1,kh kcuu1 kpp,ka3 708 # 709 # Left=\0K 5=\0L Right=\0M 710 # kcub1 kb2 kcuf1 711 # 712 # End=\0O Down=\0P NxPag=\0Q 713 # kc1,kend kcud1 kc3,knp 714 # 715 # Ins=\0R Del=\0S 716 # kich1 kdch1 717 # 718 # On keyboard with 12 function keys, 719 # shifted f-keys: F13-F24 720 # control f-keys: F25-F36 721 # alt f-keys: F37-F48 722 # The shift/control/alt keys do not modify each other, but alt overrides both, 723 # and control overrides shift. 724 # 725 # <pfkey> capability for F1-F48 -TD 726 ansi.sys|ANSI.SYS 3.1 and later versions, 727 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, 728 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 729 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, 730 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, 731 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, 732 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, 733 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, 734 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, 735 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, 736 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, 737 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, 738 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, 739 pfkey=\E[0;%?%p1%{11}%<%t%':'%e%p1%{13}%<%t%'z'%e%p1%{23}%< 740 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t 741 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p, 742 use=ansi.sys-old, 743 744 # 745 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. 746 # This should only be used when the terminal emulator cannot redefine the keys. 747 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key 748 # definitions must be restored. If the terminal emulator is quit while in vi 749 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS. 750 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix 751 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it 752 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. 753 # Note that <kcub1> is always BS, because PC-dos can tolerate this change. 754 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. 755 # Consequently the End keypad key could not be set (it is relatively safe and 756 # actually useful because it sends ^@ O, which beeps and opens a line above). 757 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 758 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor 759 \svi\s9-29-86\n\E[;75;8p, 760 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80; 761 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 762 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p 763 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, 764 use=ansi.sys, 765 # 766 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. 767 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 768 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 769 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, 770 use=ansi.sys, 771 # 772 # See ansi.sysk and nansi.sys above. 773 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 774 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 775 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad 776 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p, 777 use=ansi.sysk, 778 779 #### Atari ST terminals 780 781 # From Guido Flohr <gufl0000 (at] stud.uni-sb.de>. 782 # 783 tw52|tw52-color|Toswin window manager with color, 784 bce, 785 colors#16, pairs#0x100, 786 oc=\Eb?\Ec0, op=\Eb?\Ec0, 787 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 788 %{48}%+%c, 789 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 790 %{48}%+%c, 791 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 792 %{48}%+%c, 793 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1 794 %{48}%+%c, 795 use=tw52-m, 796 tw52-m|Toswin window manager monochrome, 797 ul, 798 ma#999, 799 bold=\Eya, dch1=\Ea, dim=\EyB, 800 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ, 801 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_, 802 smso=\EyQ, smul=\EyH, use=at-m, 803 tt52|Atari TT medium and high resolution, 804 lines#30, use=at-color, 805 st52-color|at-color|atari-color|atari_st-color|Atari ST with color, 806 bce, 807 colors#16, pairs#0x100, 808 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0, 809 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} 810 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 811 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e 812 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14} 813 %=%t6%e?, 814 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} 815 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 816 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e 817 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14} 818 %=%t6%e?, 819 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} 820 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 821 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e 822 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%= 823 %t6%e?, 824 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3} 825 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1 826 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t:%e 827 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%= 828 %t6%e?, 829 use=st52, 830 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST, 831 am, eo, mir, npc, 832 cols#80, it#8, lines#24, 833 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED, 834 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 835 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I, 836 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H, 837 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?, 838 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 839 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, 840 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, 841 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, 842 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq, 843 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep, 844 tw100|Toswin VT100 window manager, 845 eo, mir, msgr, xon, 846 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3, 847 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy 848 yzz{{||}}~~, 849 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef, 850 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr, 851 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, 852 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, 853 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM, 854 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 855 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H, 856 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?, 857 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 858 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ, 859 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 860 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI, 861 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE, 862 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM, 863 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>, 864 rmso=\E[m, rmul=\E[m, 865 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>, 866 sc=\E7, 867 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%= 868 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6' 869 %=%t3%e7%;m, 870 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%= 871 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6' 872 %=%t3%e7%;m, 873 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh, 874 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 875 # The entries for stv52 and stv52pc probably need a revision. 876 stv52|MiNT virtual console, 877 am, msgr, 878 cols#80, it#8, lines#30, 879 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 880 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 881 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 882 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 883 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 884 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 885 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 886 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 887 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 888 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 889 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, 890 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, 891 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, 892 stv52pc|MiNT virtual console with PC charset, 893 am, msgr, 894 cols#80, it#8, lines#30, 895 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j 896 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y 897 \363z\362{\343|\366}\234~\371, 898 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 899 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 900 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 901 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 902 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 903 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 904 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 905 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 906 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 907 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 908 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, 909 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, 910 smso=\Ep, smul=\EyH, 911 912 # From: Simson L. Garfinkel <simsong (at] media-lab.mit.edu> 913 atari-old|Atari st, 914 OTbs, am, 915 cols#80, it#8, lines#25, 916 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 917 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 918 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, 919 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, 920 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode 921 # From: Paul M. Aoki <aoki (at] ucbvax.berkeley.edu> 922 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, 923 lines#49, 924 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220-base, 925 # MiNT VT52 emulation. 80 columns, 25 rows. 926 # MiNT is Now TOS, the operating system which comes with all Ataris now 927 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get 928 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode 929 # From: Per Persson <pp (at] gnu.ai.mit.edu>, 27 Feb 1996 930 st52-old|Atari ST with VT52 emulation, 931 am, km, 932 cols#80, lines#25, 933 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED, 934 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 935 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 936 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, 937 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, 938 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, 939 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, 940 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek, 941 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, 942 smcup=\Ee, smso=\Ep, 943 944 #### BeOS 945 # 946 # BeOS entry for Terminal program Seems to be almost ANSI 947 beterm|BeOS Terminal, 948 am, eo, mir, msgr, xenl, xon, 949 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 950 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, 951 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 952 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 953 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 954 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 955 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 956 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 957 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, 958 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, 959 kf10=\E[20~, kf11=\E[21~, kf12=\E[22~, kf2=\E[12~, 960 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, 961 kf8=\E[18~, kf9=\E[19~, kspd=^Z, nel=\r\n, op=\E[m, rc=\E8, 962 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?4l, rmso=\E[m, 963 rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm, 964 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm, 965 setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h, 966 smkx=\E[?4h, smso=\E[7m, smul=\E[4m, 967 u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd, 968 use=vt220+pcedit, 969 970 #### Linux consoles 971 # 972 973 # release 1.2.13: 1995/03 974 # 975 # This entry is good for the 1.2.13 or later version of the Linux console. 976 # 977 # *************************************************************************** 978 # * * 979 # * WARNING: * 980 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * 981 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * 982 # * character. Here are the keymap replacement lines that will set this up: * 983 # * * 984 # keycode 15 = Tab Tab 985 # alt keycode 15 = Meta_Tab 986 # shift keycode 15 = F26 987 # string F26 ="\033[Z" 988 # * * 989 # * This has to use a key slot which is unfortunate (any unused one will * 990 # * do, F26 is the higher-numbered one). The change ought to be built * 991 # * into the kernel tables. * 992 # * * 993 # *************************************************************************** 994 # 995 # All linux kernels since 1.2.13 (at least) set the screen size 996 # themselves; this entry assumes that capability. 997 # 998 linux-basic|Linux console (basic), 999 am, bce, eo, mir, msgr, xenl, xon, 1000 it#8, ncv#18, U8#1, 1001 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i 1002 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u 1003 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 1004 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, 1005 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 1006 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1007 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 1008 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 1009 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H, 1010 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 1011 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z, 1012 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, 1013 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, 1014 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 1015 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n, 1016 rc=\E8, ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, 1017 rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 1018 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 1019 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m, 1020 smam=\E[?7h, smir=\E[4h, tbc=\E[3g, vpa=\E[%i%p1%dd, 1021 use=vt220+pcedit, use=vt102+enq, use=klone+sgr, 1022 use=ecma+color, use=linux+sfkeys, 1023 1024 linux+decid|ncurses extension for Linux console DECID, 1025 u8=\E[?6c, use=decid+cpr, 1026 1027 linux+sfkeys|shifted function-keys for Linux console, 1028 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 1029 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 1030 1031 linux-m|Linux console no color, 1032 colors@, pairs@, 1033 setab@, setaf@, setb@, setf@, use=linux, 1034 1035 # release 1.3: 1995/06 1036 # 1037 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this 1038 # and it matters, turn off <ccc>. The %02x escape used to implement this is 1039 # not supposedly back-portable to older SV curses (although it has worked fine 1040 # on Solaris for several years) and not supported in ncurses versions before 1041 # 1.9.9. 1042 linux-c-nc|Linux console with color-change, 1043 ccc, 1044 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/ 1045 %02x%p4%{255}%*%{1000}%/%02x, 1046 oc=\E]R, use=linux-basic, 1047 # From: Dennis Henriksen <opus (at] osrl.dk>, 9 July 1996 1048 linux-c|Linux console 1.3.6+ for older ncurses, 1049 ccc, 1050 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255} 1051 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a' 1052 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a' 1053 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx 1054 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx 1055 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000} 1056 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx 1057 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx 1058 %d%;, 1059 oc=\E]R, use=linux-basic, 1060 1061 # release 2.2: 1999/01 1062 # 1063 # The 2.2.x kernels add a private mode that sets the cursor type; use that to 1064 # get a block cursor for cvvis. 1065 # reported by Frank Heckenbach <frank (at] g-n-u.de>. 1066 linux2.2|Linux 2.2.x console, 1067 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, 1068 cvvis=\E[?25h\E[?8c, use=linux-c-nc, 1069 1070 # release 2.6: 2003/12 - 2004/12 1071 # 1072 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here: 1073 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html 1074 # Although the kernel has mappings for these, they were not in the default 1075 # font (tested with Debian and Fedora): 1076 # '`' diamond 1077 # '~' scan line 1 1078 # 'p' scan line 3 1079 # 'r' scan line 7 1080 # '_' scan line 9 1081 # 1082 # The fix for SI/SO is part of a configurable (i.e., "optional") kernel feature 1083 # misleadingly called CONFIG_CONSOLE_TRANSLATIONS. Disabling that not only 1084 # omits the line-drawing using SI/SO, but also part/all of the Unicode feature: 1085 # 1086 # https://cateee.net/lkddb/web-lkddb/CONSOLE_TRANSLATIONS.html 1087 # "This enables support for font mapping and Unicode translation on virtual consoles." 1088 # 1089 # This mailing list thread in July 2008 illustrates: 1090 # 1091 # https://marc.info/?t=121734656700005&r=1&w=4 1092 # "commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 break console on slackware 12.1" 1093 # 1094 # The change which made it configurable was to reduce the size for use in 1095 # embedded systems. Some background is found in 1096 # 1097 # https://lwn.net/Articles/284767/ 1098 # "An interview with the new embedded maintainers" 1099 linux2.6|Linux 2.6.x console, 1100 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 1101 yzz{{||}}~~, 1102 enacs=\E)0, rmacs=^O, 1103 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 1104 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;, 1105 sgr0=\E[m\017, smacs=^N, use=linux2.2, 1106 1107 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3). 1108 # It is the same as xterm's erase-saved-lines feature. 1109 # 1110 # Linux 3.0 was released in July 2011. The keyboard utilities (kbd) are 1111 # used for configuring its keyboard mappings. 1112 # 1113 # kbd 1.14 was released before that (January 2008), but due to its placement 1114 # late in the Linux 2.6.x series had no immediate effect for most users. That 1115 # provided a default mapping for shift-tab to the (misnamed) Meta_Tab, i.e., 1116 # the same as Alt-Tab. 1117 # 1118 # The suggested mapping for the conventional \E[Z is provided in this entry as 1119 # an extended key to lessen user surprise -TD 1120 linux3.0|Linux 3.0 kernels, 1121 kcbt=\E^I, E3=\E[3J, kcbt2=\E[Z, use=linux2.6, 1122 1123 # This is Linux console for ncurses. 1124 linux|Linux console, 1125 use=linux3.0, 1126 1127 # Subject: linux 2.6.26 vt back_color_erase 1128 # Changes to the Linux console driver broke bce model as reported in 1129 # https://bugzilla.novell.com/show_bug.cgi?id=418613 1130 # apparently from 1131 # http://lkml.org/lkml/2008/4/26/305 1132 # http://lkml.org/lkml/2008/10/3/66 1133 linux2.6.26|Linux console w/o bce, 1134 bce@, use=linux2.6, 1135 1136 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 1137 linux-nic|Linux with ich/ich1 suppressed for non-curses programs, 1138 ich@, ich1@, use=linux, 1139 1140 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. 1141 # acsc entry from Pavel Roskin" <pavel (at] absolute.spb.su>, 29 Sep 1997. 1142 linux-koi8|Linux with koi8 alternate character set, 1143 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i 1144 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v 1145 \211w\210x\201y\230z\231{\267|\274~\224, 1146 use=linux, use=klone+koi8acs, 1147 1148 # Another entry for KOI8-r with Qing Long's acsc. 1149 # (which one better complies with the standard?) 1150 linux-koi8r|Linux with koi8-r alternate character set, 1151 use=linux, use=klone+koi8acs, 1152 1153 # Entry for the latin1 and latin2 fonts 1154 linux-lat|Linux with latin1 or latin2 alternate character set, 1155 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i 1156 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u 1157 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376, 1158 use=linux, 1159 1160 # This uses graphics from VT codeset instead of from cp437. 1161 # reason: cp437 (aka "straight to font") is not functional under luit. 1162 # from: Andrey V Lukyanov <land (at] long.yar.ru>. 1163 linux-vt|Linux console using VT codes for graphics, 1164 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 1165 yzz~~, 1166 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, 1167 smpch@, use=linux, 1168 1169 # release: 0.3.9b 1997/01 to 2000/05 1170 # 1171 # This is based on the Linux console (relies on the console to perform some 1172 # of the functionality), but does not recognize as many control sequences. 1173 # The program comes bundled with an old (circa 1998) copy of the Linux 1174 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as 1175 # \E* move cursor to home, as as \E[H 1176 # \E,X same as \E(X 1177 # \EE move cursor to beginning of row 1178 # \E[y,xf same as \E[y,xH 1179 # 1180 # Note: The status-line support is buggy (dsl does not work). 1181 kon|kon2|Kanji ON Linux console, 1182 am, bce, ccc, eo, eslok, hs, mir, msgr, xenl, xon, 1183 colors#8, it#8, ncv#18, pairs#64, 1184 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 1185 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 1186 \301w\302x\263y\363z\362{\343|\330}\234~\376, 1187 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 1188 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, 1189 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1190 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 1191 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1192 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 1193 dl1=\E[M, dsl=\E[?H\E[?E, ed=\E[J, el=\E[K, el1=\E[1K, 1194 fsl=\E[?F, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 1195 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 1196 initc=\E]P%p1%x%p2%02x%p3%02x%p4%02x, invis=\E[8m, 1197 kb2=\E[G, kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1198 kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 1199 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 1200 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 1201 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 1202 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 1203 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 1204 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[37;40m, 1205 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, 1206 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7, 1207 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1208 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 1209 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 1210 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m, 1211 smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[?T, u8=\E[?6c, 1212 vpa=\E[%i%p1%dd, use=ansi+enq, 1213 1214 # release: 0.4.7 2005/05 1215 # 1216 jfbterm|japanese framebuffer terminal, 1217 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 1218 yzz{{||}}~~, 1219 sgr0=\E[0m, use=kon, 1220 1221 # FbTerm 1222 # Another variant. There are two parts (src, src/lib) with the latter 1223 # comprising the escape-sequence parsing. The copyright notice on that 1224 # says it is based on GTerm by Timothy Miller. 1225 # 1226 # The original developer "dragchan" has left, but as of March 2017 there is 1227 # (still dead) code from May 2015 here: 1228 # https://github.com/izmntuk/fbterm 1229 # 1230 # The acsc string may be incorrect. 1231 # 1232 # Not used here, the program recognizes escapes for italic, underline and 1233 # dim, rendering those as green, cyan and gray respectively. 1234 fbterm|FbTerm for Linux with framebuffer, 1235 colors#0x100, pairs#0x10000, 1236 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i 1237 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u 1238 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 1239 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m, 1240 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d}, 1241 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 1242 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m, 1243 sgr0=\E[0;10m, smacs=\E[11m, use=linux, 1244 1245 # 16-color linux console entry; this works with a 256-character 1246 # console font but bright background colors turn into dim ones when 1247 # you use a 512-character console font. This uses bold for bright 1248 # foreground colors and blink for bright background colors. 1249 # 1250 # Interestingly, the original version of this entry in 2009 used a documented 1251 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992 1252 # as an equivalent for SGR 22. Long after (early 2018), someone modified the 1253 # console driver to make it ignore SGR 21 because the ECMA-48 standard 1254 # suggested a different use for that particular code: 1255 # 1256 # https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0 1257 # 1258 # Two years later, someone (unfamiliar with ECMA-48 this time) documented it: 1259 # 1260 # https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615 1261 # 1262 # For background, refer to the report on bug-ncurses: 1263 # 1264 # https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html 1265 linux-16color|Linux console with 16 colors, 1266 colors#16, ncv#42, pairs#0x100, 1267 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m, 1268 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m, 1269 use=linux, 1270 1271 # bterm (bogl 0.1.18) 1272 # Implementation is in bogl-term.c 1273 # Key capabilities from linux terminfo entry 1274 # 1275 # Notes: 1276 # bterm only supports acs using wide-characters, has case for these: qjxamlkut 1277 # bterm does not support sgr, since it only processes one parameter -TD 1278 bterm|bogl virtual terminal, 1279 am, bce, 1280 colors#8, cols#80, lines#24, pairs#64, 1281 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, clear=\E[H\E[2J, 1282 cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J, 1283 el=\E[K, home=\E[H, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z, 1284 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, 1285 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 1286 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 1287 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 1288 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 1289 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, kspd=^Z, nel=\r\n, 1290 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m, 1291 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1292 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m, 1293 use=vt220+pcedit, use=vt220+cvis, 1294 1295 #### Mach 1296 # 1297 1298 # From: Matthew Vernon <mcv21 (at] pick.sel.cam.ac.uk> 1299 mach|Mach console, 1300 am, km, NQ, 1301 cols#80, it#8, lines#25, 1302 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r, 1303 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 1304 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1305 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1306 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, 1307 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1308 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, 1309 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 1310 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, 1311 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, 1312 smso=\E[7m, smul=\E[4m, 1313 mach-bold|Mach console with bold instead of underline, 1314 rmul=\E[0m, smul=\E[1m, use=mach, 1315 mach-color|Mach console with ANSI color, 1316 colors#8, pairs#64, 1317 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, 1318 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, 1319 1320 # From: Samuel Thibault 1321 # Source: git://git.sv.gnu.org/hurd/gnumach.git 1322 # Files: i386/i386at/kd.c 1323 # 1324 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD 1325 mach-gnu|GNU Mach, 1326 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l 1327 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x 1328 \263y\363z\362{\343|\330}\234~\376, 1329 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, 1330 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, 1331 invis=\E[8m, nel=\EE, 1332 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t; 1333 2%;%?%p6%t;1%;%?%p7%t;8%;m, 1334 use=ecma+index, use=mach, 1335 1336 mach-gnu-color|GNU Mach console with ANSI color, 1337 colors#8, pairs#64, 1338 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm, 1339 setaf=\E[3%p1%dm, use=mach-gnu, 1340 1341 # From: Marcus Brinkmann 1342 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/ 1343 # 1344 # Comments in the original are summarized here: 1345 # 1346 # hurd uses 8-bit characters (km). 1347 # 1348 # Although it doesn't do XON/XOFF, we don't want padding characters (xon). 1349 # 1350 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't 1351 # have the eat_newline_glitch. It doesn't support setting or removing tab 1352 # stops (hts/tbc). 1353 # 1354 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is 1355 # one byte instead three. 1356 # 1357 # <ich1> is not included because hurd has insert mode. 1358 # 1359 # hurd doesn't use ^J for scrolling, because this could put things into the 1360 # scrollback buffer. 1361 # 1362 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 1363 # This is a GNU extension. 1364 # 1365 # The original has commented-out ncv, but is restored here. 1366 # 1367 # Reading the source, RIS resets cnorm, but not xmous. 1368 hurd|The GNU Hurd console server, 1369 am, bce, bw, eo, km, mir, msgr, xenl, xon, NQ, 1370 colors#8, it#8, ncv#18, pairs#64, 1371 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 1372 yzz{{||}}~~, 1373 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\Ec, cr=\r, 1374 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1375 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1376 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1377 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1378 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1379 el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, 1380 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 1381 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD, 1382 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, 1383 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 1384 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 1385 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, 1386 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 1387 kich1=\E[2~, kmous=\E[M, kspd=^Z, nel=\r\n, op=\E[39;49m, 1388 rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m, rmir=\E[4l, 1389 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, 1390 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1391 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t; 1392 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 1393 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, 1394 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h, 1395 use=vt220+pcedit, use=ecma+index, use=ecma+italics, 1396 use=vt220+cvis, 1397 1398 #### QNX 1399 # 1400 1401 # QNX 4.0 Console 1402 # Michael's original version of this entry had <am@>, <smcup=\Ei>, 1403 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower 1404 # right corner without triggering a scroll. The ncurses terminfo library can 1405 # handle this case with the <ich1> capability, and prefers <am> for better 1406 # optimization. Bug: The <op> capability resets attributes. 1407 # From: Michael Hunter <mphunter (at] qnx.com> 30 Jul 1996 1408 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>) 1409 qnx|qnx4|QNX console, 1410 daisy, km, mir, msgr, xhpa, xt, 1411 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 1412 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t 1413 \303u\264v\301w\302x\263, 1414 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 1415 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 1416 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 1417 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 1418 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263, 1419 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 1420 kDL=\377\366, kEND=\377\301, kEOL=\377\311, 1421 kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 1422 kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 1423 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 1424 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 1425 kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 1426 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 1427 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 1428 kclo=\377\343, kclr=\377\341, kcmd=\377\245, 1429 kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 1430 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 1431 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 1432 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 1433 kext=\377\270, kf1=\377\201, kf10=\377\212, 1434 kf11=\377\256, kf12=\377\257, kf13=\377\213, 1435 kf14=\377\214, kf15=\377\215, kf16=\377\216, 1436 kf17=\377\217, kf18=\377\220, kf19=\377\221, 1437 kf2=\377\202, kf20=\377\222, kf21=\377\223, 1438 kf22=\377\224, kf23=\377\333, kf24=\377\334, 1439 kf25=\377\225, kf26=\377\226, kf27=\377\227, 1440 kf28=\377\230, kf29=\377\231, kf3=\377\203, 1441 kf30=\377\232, kf31=\377\233, kf32=\377\234, 1442 kf33=\377\235, kf34=\377\236, kf35=\377\276, 1443 kf36=\377\277, kf37=\377\321, kf38=\377\322, 1444 kf39=\377\323, kf4=\377\204, kf40=\377\324, 1445 kf41=\377\325, kf42=\377\326, kf43=\377\327, 1446 kf44=\377\330, kf45=\377\331, kf46=\377\332, 1447 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 1448 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 1449 khlp=\377\350, khome=\377\240, khts=\377\342, 1450 kich1=\377\253, kil1=\377\273, kind=\377\261, 1451 kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 1452 knp=\377\252, knxt=\377\312, kopn=\377\357, 1453 kopt=\377\353, kpp=\377\242, kprt=\377\255, 1454 kprv=\377\302, krdo=\377\336, kref=\377\354, 1455 kres=\377\360, krfr=\377\347, kri=\377\271, 1456 krmir=\377\313, krpl=\377\362, krst=\377\352, 1457 ksav=\377\361, kslt=\377\247, kspd=\377\335, 1458 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 1459 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 1460 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 1461 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 1462 smso=\E(, smul=\E[, 1463 # 1464 # 1465 qnxt|qnxt4|QNX4 terminal, 1466 crxm, use=qnx4, 1467 # 1468 qnxm|QNX4 with mouse events, 1469 maddr#1, 1470 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 1471 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 1472 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 1473 smicm=\E/>2h, use=qnx4, 1474 # 1475 qnxw|QNX4 windows, 1476 xvpa, use=qnxm, 1477 # 1478 # Monochrome QNX4 terminal or console. Setting this terminal type will 1479 # allow an application running on a color console to behave as if it 1480 # were a monochrome terminal. Output will be through stdout instead of 1481 # console writes because the term routines will recognize that the 1482 # terminal name starts with 'qnxt'. 1483 # 1484 qnxtmono|Monochrome QNX4 terminal or console, 1485 colors@, pairs@, 1486 scp@, use=qnx4, 1487 1488 # From: Federico Bianchi <bianchi (at] pc-arte2.arte.unipi.it>, 1 Jul 1998 1489 # (esr: commented out <scp> and <rmcup> to avoid warnings.) 1490 # (TD: derive from original qnx4 entry) 1491 qnxt2|QNX 2.15 serial terminal, 1492 am, 1493 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 1494 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 1495 1496 # QNX ANSI terminal definition 1497 qansi-g|QNX ANSI, 1498 am, eslok, hs, xon, 1499 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 1500 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1501 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, 1502 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 1503 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1504 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 1505 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1506 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 1507 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 1508 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 1509 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 1510 ind=\E[S, invis=\E[9m, 1511 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 1512 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 1513 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 1514 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 1515 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 1516 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 1517 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 1518 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 1519 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 1520 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 1521 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 1522 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 1523 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 1524 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 1525 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 1526 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 1527 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 1528 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 1529 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 1530 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 1531 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 1532 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 1533 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 1534 rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 1535 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 1536 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1537 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 1538 %=%t3%e%p1%d%;m, 1539 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 1540 %=%t3%e%p1%d%;m, 1541 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 1542 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 1543 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 1544 smul=\E[4m, tbc=\E[3g, 1545 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=decid+cpr, 1546 use=ansi+rep, use=att610+cvis0, use=ecma+index, 1547 # 1548 qansi|QNX ANSI with console writes, 1549 daisy, xhpa, use=qansi-g, 1550 # 1551 qansi-t|QNX ANSI without console writes, 1552 crxm, use=qansi, 1553 # 1554 qansi-m|QNX ANSI with mouse, 1555 maddr#1, 1556 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 1557 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 1558 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 1559 smicm=\E[>2h, use=qansi, 1560 # 1561 qansi-w|QNX ANSI for windows, 1562 xvpa, use=qansi-m, 1563 1564 #### SCO consoles 1565 1566 # SCO console and SOS-Syscons console for 386bsd 1567 # (scoansi: had unknown capabilities 1568 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ 1569 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: 1570 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ 1571 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ 1572 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ 1573 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based 1574 # on the <smacs>=\E[12m -- esr) 1575 # 1576 # klone+sgr-dumb is an error since the acsc does not match -TD 1577 # 1578 # In this description based on SCO's keyboard(HW) manpage list of default 1579 # function key values: 1580 # F13-F24 are shifted F1-F12 1581 # F25-F36 are control F1-F12 1582 # F37-F48 are shift+control F1-F12 1583 # 1584 # hpa/vpa work in the console, but not in scoterm: 1585 # hpa=\E[%p1%dG, 1586 # vpa=\E[%p1%dd, 1587 # 1588 # SCO's terminfo uses 1589 # kLFT=\E[d, 1590 # kRIT=\E[c, 1591 # which do not work (console or scoterm). 1592 # 1593 # Console documents only 3 attributes can be set with SGR (so we don't use sgr). 1594 scoansi-old|SCO Extended ANSI standard crt (5.0.5), 1595 OTbs, am, bce, eo, xon, NQ, 1596 colors#8, cols#80, it#8, lines#25, pairs#64, 1597 acsc=+/\,.-\230.\2310[5566778899::;;<<==>>FFGGHHIIJJKKLLMMNN 1598 OOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3 1599 yszr{c}\034~\207, 1600 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 1601 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, 1602 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 1603 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1604 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, 1605 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, 1606 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, 1607 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 1608 ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z, 1609 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, 1610 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, 1611 kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, 1612 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, 1613 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, 1614 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, 1615 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, 1616 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, 1617 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, 1618 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, 1619 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, 1620 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m, 1621 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 1622 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1623 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m, 1624 smul=\E[4m, use=ecma+index, 1625 scoansi-new|SCO Extended ANSI standard crt (5.0.6), 1626 km, 1627 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, 1628 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, 1629 rep=\E[%p1%d;%p2%db, rmm=\E[=11L, 1630 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%? 1631 %p7%t;8%;%?%p9%t;12%e;10%;m, 1632 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, 1633 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, 1634 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, 1635 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, 1636 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, 1637 use=scoansi-old, 1638 # make this easy to change... 1639 scoansi|SCO Extended ANSI standard crt, 1640 use=scoansi-old, 1641 1642 #### SGI consoles 1643 1644 # Sent by Stefan Stapelberg <stefan (at] rent-a-guru.de>, 24 Feb 1997, this is 1645 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes 1646 # for the application keypad mode. We have added iris-ansi-ap rather than 1647 # change the original to keypad mode. 1648 # 1649 # (iris-ansi: added rmam/smam based on init string -- esr) 1650 # 1651 # This entry, and those derived from it, is used in xwsh (also known as 1652 # winterm). Some capabilities that do not fit into the terminfo model 1653 # include the shift- and control-functionkeys: 1654 # 1655 # F1-F12 generate different codes when shift or control modifiers are used. 1656 # For example: 1657 # F1 \E[001q 1658 # shift F1 \E[013q 1659 # control-F1 \E[025q 1660 # 1661 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., 1662 # \EOP to \EOS. The shifted and control modifiers still do the same thing. 1663 # 1664 # The cursor keys also have different codes: 1665 # control-up \E[162q 1666 # control-down \E[165q 1667 # control-left \E[159q 1668 # control-right \E[168q 1669 # 1670 # shift-up \E[161q 1671 # shift-down \E[164q 1672 # shift-left \E[158q 1673 # shift-right \E[167q 1674 # 1675 # control-tab \[072q 1676 # 1677 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 1678 am, 1679 cols#80, it#8, lines#40, 1680 bel=^G, bold=\E[1m, clear=\E[H\E[2J, 1681 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD, 1682 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, 1683 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 1684 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 1685 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 1686 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 1687 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 1688 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 1689 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 1690 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q, 1691 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, 1692 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, 1693 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 1694 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q, 1695 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q, 1696 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8, 1697 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, 1698 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 1699 tbc=\E[3g, 1700 iris-ansi-ap|IRIS ANSI in application-keypad mode, 1701 is2=\E[?1l\E=\E[?7h, kent=\EOM, use=iris-ansi, 1702 1703 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX 1704 # (T.Dickey 98/1/24) 1705 iris-color|xwsh|IRIX ANSI with color, 1706 ncv#33, 1707 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 1708 ech=\E[%p1%dX, ich=\E[%p1%d@, rmul=\E[24m, rs1=\Ec, 1709 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1710 use=ecma+italics, use=vt100+enq, use=klone+color, 1711 use=iris-ansi-ap, 1712 1713 #### OpenBSD consoles 1714 # 1715 # From: Alexei Malinin <Alexei.Malinin (at] mail.ru>; October, 2011. 1716 # 1717 # The following terminal descriptions for the AMD/Intel PC console 1718 # were prepared based on information contained in the OpenBSD-4.9 1719 # termtypes.master and wscons(4) & vga(4) manuals (2010, November). 1720 # 1721 # Added bce based on testing with tack -TD 1722 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD 1723 # Changed kbs to DEL and removed keys that duplicate stty settings -TD 1724 # 1725 # Notes from testing with vttest: 1726 # fails wrapping test 1727 # no 8-bit controls 1728 # identifies as vt200 with selective erase, but does not implement DECSCA 1729 # no vt52 mode 1730 # also lacks these: 1731 # ESC # 8 DEC Screen Alignment Test (DECALN). 1732 # CSI ? 5 h Reverse Video (DECSCNM). 1733 # 1734 pccon+keys|OpenBSD PC keyboard keys, 1735 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1736 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~, 1737 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 1738 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 1739 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~, 1740 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~, 1741 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 1742 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 1743 krfr=^R, 1744 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console, 1745 acsc=+>\,<-\^.v0#`+a:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y# 1746 z#{*|!}#~o, 1747 bold=\E[1m, rev=\E[7m, rmso=\E[27m, 1748 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m, 1749 sgr0=\E[m, smso=\E[7m, 1750 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console, 1751 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1752 bold=\E[1m, enacs=\E)0, rev=\E[7m, rmacs=\E(B, rmso=\E[27m, 1753 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e 1754 \E(B%;, 1755 sgr0=\E[m\E(B, smacs=\E(0, smso=\E[7m, 1756 # underline renders as color 1757 pccon+colors|ANSI colors for OpenBSD PC console, 1758 bce, 1759 colors#8, ncv#2, pairs#64, 1760 op=\E[49;39m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1761 # OpenBSD uses wscons, 1762 # + which does not implement DECSCNM or anything comparable, so it does not 1763 # support flash. 1764 # + it renders underline using color. 1765 pccon+base|base capabilities for OpenBSD PC console, 1766 am, km, mc5i, msgr, npc, nxon, xenl, xon, 1767 cols#80, it#8, lines#24, 1768 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, 1769 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 1770 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1771 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 1772 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 1773 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 1774 il=\E[%p1%dL, il1=\E[L, ind=\ED, nel=\EE, rc=\E8, ri=\EM, 1775 rmam=\E[?7l, rmul=\E[24m, rs2=\Ec, sc=\E7, smam=\E[?7h, 1776 smul=\E[4m, tbc=\E[3g, use=ansi+cpr, 1777 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics, 1778 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys, 1779 pccon0|OpenBSD PC console with simple ASCII pseudographics, 1780 use=pccon0-m, use=pccon+colors, 1781 pccon-m|OpenBSD PC console without colors, 1782 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys, 1783 use=ansi+enq, use=vt220+cvis, 1784 pccon|OpenBSD PC console, 1785 use=pccon-m, use=pccon+colors, 1786 1787 #### NetBSD consoles 1788 # 1789 # pcvt termcap database entries (corresponding to release 3.31) 1790 # Author's last edit-date: [Fri Sep 15 20:29:10 1995] 1791 # 1792 # (For the terminfo master file, I translated these into terminfo syntax. 1793 # Then I dropped all the pseudo-HP entries. we don't want and can't use 1794 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a 1795 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) 1796 1797 # NOTE: <ich1> has been taken out of this entry. for reference, it should 1798 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. 1799 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) 1800 pcvtXX|pcvt VT200 emulator (DEC VT220), 1801 am, km, mir, msgr, xenl, 1802 it#8, vt#3, 1803 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 1804 yzz~~, 1805 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 1806 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1807 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1808 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1809 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1810 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 1811 il=\E[%p1%dL, il1=\E[L, ind=\ED, 1812 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?, 1813 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 1814 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 1815 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 1816 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, 1817 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 1818 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 1819 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 1820 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1821 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 1822 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 1823 use=decid+cpr, use=ecma+index, use=vt220+cvis, 1824 1825 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor) 1826 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1827 # 50 lines entries; 80 columns 1828 pcvt25|DEC VT220 emulation with 25 lines, 1829 cols#80, lines#25, 1830 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1831 pcvt28|DEC VT220 emulation with 28 lines, 1832 cols#80, lines#28, 1833 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1834 pcvt35|DEC VT220 emulation with 35 lines, 1835 cols#80, lines#35, 1836 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1837 pcvt40|DEC VT220 emulation with 40 lines, 1838 cols#80, lines#40, 1839 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1840 pcvt43|DEC VT220 emulation with 43 lines, 1841 cols#80, lines#43, 1842 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1843 pcvt50|DEC VT220 emulation with 50 lines, 1844 cols#80, lines#50, 1845 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1846 1847 # NetBSD/FreeBSD VT220 terminal emulator console (pc keyboard & monitor) 1848 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 1849 # 50 lines entries; 132 columns 1850 pcvt25w|DEC VT220 emulation with 25 lines and 132 cols, 1851 cols#132, lines#25, 1852 is2=\E[1;25r\E[25;1H, use=pcvtXX, 1853 pcvt28w|DEC VT220 emulation with 28 lines and 132 cols, 1854 cols#132, lines#28, 1855 is2=\E[1;28r\E[28;1H, use=pcvtXX, 1856 pcvt35w|DEC VT220 emulation with 35 lines and 132 cols, 1857 cols#132, lines#35, 1858 is2=\E[1;35r\E[35;1H, use=pcvtXX, 1859 pcvt40w|DEC VT220 emulation with 40 lines and 132 cols, 1860 cols#132, lines#40, 1861 is2=\E[1;40r\E[40;1H, use=pcvtXX, 1862 pcvt43w|DEC VT220 emulation with 43 lines and 132 cols, 1863 cols#132, lines#43, 1864 is2=\E[1;43r\E[43;1H, use=pcvtXX, 1865 pcvt50w|DEC VT220 emulation with 50 lines and 132 cols, 1866 cols#132, lines#50, 1867 is2=\E[1;50r\E[50;1H, use=pcvtXX, 1868 1869 # OpenBSD implements a color variation 1870 pcvt25-color|DEC VT220 emulation with 25 lines and color, 1871 cols#80, lines#25, 1872 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, 1873 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1874 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1875 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 1876 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, 1877 use=ecma+color, 1878 1879 # Terminfo entries to enable the use of the ncurses library in colour on a 1880 # NetBSD-arm32 console (only tested on a RiscPC). 1881 # Created by Dave Millen <dmill (at] globalnet.co.uk> 22.07.98 1882 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected 1883 # typo in invis - TD 1884 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), 1885 am, bce, msgr, xenl, xon, 1886 cols#80, it#8, lines#30, 1887 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1888 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 1889 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 1890 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 1891 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 1892 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 1893 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 1894 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, 1895 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, 1896 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 1897 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, 1898 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, 1899 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, 1900 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 1901 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1902 sc=\E7, 1903 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 1904 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, 1905 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 1906 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, 1907 use=klone+color, 1908 1909 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), 1910 cols#132, lines#50, use=arm100, 1911 1912 # NetBSD/x68k console VT200 emulator. This port runs on a 68K machine 1913 # manufactured by Sharp for the Japanese market. 1914 # From Minoura Makoto <minoura (at] netlaputa.or.jp>, 12 May 1996 1915 x68k|x68k-ite|NetBSD/x68k ITE, 1916 cols#96, lines#32, 1917 kbs=\177, kclr=\E[9~, khlp=\E[28~, use=vt220-base, 1918 1919 # <tv (at] pobox.com>: 1920 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite. 1921 # 1922 # (still unfinished, but good enough so far.) 1923 ofcons|DNARD OpenFirmware console, 1924 bw, 1925 cols#80, lines#30, 1926 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r, 1927 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 1928 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 1929 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 1930 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, 1931 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 1932 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D, 1933 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, 1934 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, 1935 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, 1936 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m, 1937 rmso=\2330m, rmul=\2330m, 1938 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8 1939 %;%?%p1%p3%|%t;7%;m, 1940 sgr0=\2330m, smso=\2337m, smul=\2334m, 1941 1942 # NetBSD "wscons" emulator in VT220 mode. 1943 # This entry is based on the NetBSD termcap entry, correcting the ncv value. 1944 # The emulator renders underlined text in red. Colors are otherwise usable. 1945 # 1946 # Testing the emulator and reading the source code (NetBSD 2.0), it appears 1947 # that "vt220" is inaccurate. There are a few VT220-features, but most of the 1948 # VT220 screens in vttest do not work with this emulator. For instance, it 1949 # identifies itself (primary DA response) as a VT220 with selective erase. But 1950 # the selective erase feature does not work. The secondary response is copied 1951 # from Kermit's emulation of VT220, does not correspond to actual VT220. At 1952 # the level of detail in a termcap, it is a passable emulator, since ECH does 1953 # work. Don't use it on a VMS system -TD 1954 wsvt25|NetBSD wscons in 25 line DEC VT220 mode, 1955 bce, 1956 colors#8, lines#25, pairs#64, 1957 is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, 1958 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 1959 khome=\E[7~, op=\E[m, rs1=\Ec, setab=\E[4%p1%dm, 1960 setaf=\E[3%p1%dm, use=vt220, 1961 1962 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, 1963 km, use=wsvt25, 1964 1965 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD 1966 # 1967 # TERM is by default vt100 for the console, wsvt25 for other ttys. 1968 # Initial testing set TERM=xterm, based on comments by developers, found too 1969 # many differences to continue in that path. However, test-results may be 1970 # useful to people curious about compatibility with xterm. 1971 # 1972 # Testing with tack: 1973 # ----------------- 1974 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis 1975 # There is color-bleeding in the color-pairs screen. 1976 # Attributes do not work with color 1977 # Failed: vpa/hpa 1978 # Failed: kf1-kf4, kf13-kf48, khome, kend 1979 # (effectively xterm-r6 for function-keys) 1980 # None of the function or cursor key-modifiers are encoded. 1981 # Console hangs in the smm/rmm test if TERM=xterm, does not show test 1982 # 1983 # Testing with vttest: 1984 # ------------------- 1985 # Identifies as VT220 with selective erase 1986 # (however, selective erase refers to DECSCA, SPA) 1987 # Does not implement VT52 1988 # Uses spaces to simulate double-size characters 1989 # Does not support 8-bit controls 1990 # Does not support VT220 reports 1991 # Does not support send/receive mode 1992 # Supports ECH (like rxvt) 1993 # Does not support DECSCA 1994 # Does not support any of the ISO-6429 cursor-movement 1995 # Does not support any of the ISO-6429 miscellaneous tests 1996 # (SL/SR also leave unexpected char on screen too) 1997 # Background does not change in menu 11.6.9 (SGR 22-27) 1998 # None of the xterm special features tests work 1999 netbsd6|NetBSD wscons in 25 line DEC VT100 mode, 2000 kbs=^?, use=wsvt25, 2001 2002 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and 2003 # DECstation/pmax. 2004 rcons|BSD rasterconsole, 2005 use=sun-il, 2006 # Color version of above. Color currently only provided by NetBSD. 2007 rcons-color|BSD rasterconsole with ANSI color, 2008 bce, 2009 colors#8, pairs#64, 2010 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, 2011 2012 # mgterm -- MGL/MGL2, MobileGear Graphic Library 2013 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} 2014 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD 2015 # -- compare with cons25w 2016 mgterm|MGL/MGL2 MobileGear Graphic Library, 2017 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, 2018 colors#8, cols#80, it#8, lines#18, pairs#64, 2019 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 2020 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2021 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 2022 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2023 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, 2024 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 2025 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 2026 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E, 2027 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2028 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, 2029 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, 2030 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 2031 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, 2032 rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, 2033 setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, 2034 vpa=\E[%i%p1%dd, use=ecma+index, 2035 2036 #### FreeBSD console entries 2037 2038 # Originally from termcap: 2039 # 2040 # From: Andrey Chernov <ache (at] astral.msk.su> 29 Mar 1996 2041 # Andrey Chernov maintains the FreeBSD termcap distributions. 2042 # 2043 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade 2044 # or comment out the :cb: capability in the console entry. 2045 # 2046 # Alexander Lukyanov reports: 2047 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. 2048 # Now el1 clears not only to the line beginning, but also a large chunk 2049 # of previous line. But there is another bug - ech does not work at all. 2050 2051 # syscons, sc - the console driver 2052 # 2053 # for syscons 2054 # common entry without semigraphics 2055 # Bug: The <op> capability resets attributes. 2056 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for 2057 # instance el1 does if the cursor is moved to the right margin first. Removed 2058 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) 2059 # 2060 # Setting colors turns off reverse; we cannot guarantee order, so use ncv. 2061 # Note that this disables standout with color. 2062 # 2063 # The emulator sends different strings based on shift- and control-keys, 2064 # like scoansi: 2065 # F13-F24 are shifted F1-F12 2066 # F25-F36 are control F1-F12 2067 # F37-F48 are shift+control F1-F12 2068 cons25w|ansiw|ansi80x25-raw|FreeBSD console (25-line raw mode), 2069 am, bce, bw, eo, msgr, npc, 2070 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, 2071 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 2072 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 2073 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 2074 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2075 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, 2076 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 2077 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 2078 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E, 2079 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2080 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, 2081 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, 2082 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, 2083 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, 2084 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, 2085 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, 2086 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, 2087 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, 2088 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, 2089 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, 2090 khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, 2091 op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m, 2092 rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm, 2093 setaf=\E[3%p1%dm, 2094 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%? 2095 %p6%t;1%;m, 2096 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index, 2097 cons25|ansis|ansi80x25|FreeBSD console (25-line ANSI mode), 2098 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l 2099 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~ 2100 \371, 2101 use=cons25w, 2102 cons25-debian|FreeBSD console with debian backspace (25-line ANSI mode), 2103 kbs=^?, kdch1=\E[3~, use=cons25, 2104 cons25-m|ansis-mono|ansi80x25-mono|FreeBSD console (25-line mono ANSI mode), 2105 colors@, pairs@, 2106 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 2107 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 2108 smul=\E[4m, use=cons25, 2109 cons30|ansi80x30|FreeBSD console (30-line ANSI mode), 2110 lines#30, use=cons25, 2111 cons30-m|ansi80x30-mono|FreeBSD console (30-line mono ANSI mode), 2112 lines#30, use=cons25-m, 2113 cons43|ansi80x43|FreeBSD console (43-line ANSI mode), 2114 lines#43, use=cons25, 2115 cons43-m|ansi80x43-mono|FreeBSD console (43-line mono ANSI mode), 2116 lines#43, use=cons25-m, 2117 cons50|ansil|ansi80x50|FreeBSD console (50-line ANSI mode), 2118 lines#50, use=cons25, 2119 cons50-m|ansil-mono|ansi80x50-mono|FreeBSD console (50-line mono ANSI mode), 2120 lines#50, use=cons25-m, 2121 cons60|ansi80x60|FreeBSD console (60-line ANSI mode), 2122 lines#60, use=cons25, 2123 cons60-m|ansi80x60-mono|FreeBSD console (60-line mono ANSI mode), 2124 lines#60, use=cons25-m, 2125 cons25r|pc3r|ibmpc3r|cons25-koi8-r|FreeBSD console w/koi8-r cyrillic, 2126 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m 2127 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~ 2128 \225, 2129 use=cons25w, 2130 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|FreeBSD console w/koi8-r cyrillic (mono), 2131 colors@, pairs@, 2132 op@, rmul=\E[m, setab@, setaf@, 2133 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 2134 %t;30;1%;%?%p6%t;1%;m, 2135 smul=\E[4m, use=cons25r, 2136 cons50r|cons50-koi8r|FreeBSD console w/koi8-r cyrillic (50 lines), 2137 lines#50, use=cons25r, 2138 cons50r-m|cons50-koi8r-m|FreeBSD console w/koi8-r cyrillic (50-line mono), 2139 lines#50, use=cons25r-m, 2140 cons60r|cons60-koi8r|FreeBSD console w/koi8-r cyrillic (60 lines), 2141 lines#60, use=cons25r, 2142 cons60r-m|cons60-koi8r-m|FreeBSD console w/koi8-r cyrillic (60-line mono), 2143 lines#60, use=cons25r-m, 2144 # ISO 8859-1 FreeBSD console 2145 cons25l1|cons25-iso8859|FreeBSD console w/iso 8859-1 chars, 2146 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k 2147 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u 2148 \226v\227w\230x\231y\232z\233~\237, 2149 use=cons25w, 2150 cons25l1-m|cons25-iso-m|FreeBSD console w/iso 8859-1 chars (mono), 2151 colors@, pairs@, 2152 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 2153 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 2154 smul=\E[4m, use=cons25l1, 2155 cons50l1|cons50-iso8859|FreeBSD console w/iso 8859-1 chars (50 lines), 2156 lines#50, use=cons25l1, 2157 cons50l1-m|cons50-iso-m|FreeBSD console w/iso 8859-1 chars (50-line mono), 2158 lines#50, use=cons25l1-m, 2159 cons60l1|cons60-iso|FreeBSD console w/iso 8859-1 chars (60 lines), 2160 lines#60, use=cons25l1, 2161 cons60l1-m|cons60-iso-m|FreeBSD console w/iso 8859-1 chars (60-line mono), 2162 lines#60, use=cons25l1-m, 2163 2164 # vt - virtual terminal console driver 2165 # 2166 # Starting with FreeBSD 8, an alternative configuration for syscons is provided, 2167 # which is intended to be xterm-compatible. See for example 2168 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/ 2169 # in particular scterm-teken.c 2170 # 2171 # Some of the documentation refers to this as "vt"; its proper name is "teken". 2172 # 2173 # The sc(4) manual page states that it is possible to switch between the two 2174 # by editing /boot/loader.conf, adding 2175 # kern.vty=sc 2176 # Doing that does not change the default TERM variable. That is hard-coded in 2177 # /etc/ttys, rather than deriving it from the kernel state. 2178 # 2179 # For FreeBSD 12 and 13: 2180 # --------------------- 2181 # In newer releases, it is no longer possible to boot into a configuration that 2182 # works with syscons. According to efi(4), 2183 # "The vt(4) system console is automatically selected when booting via UEFI." 2184 # See FreeBSD #264226. 2185 # 2186 # FreeBSD 13 supports 64-bit machines which boot with UEFI: 2187 # https://www.freebsd.org/platforms/ 2188 # The i386 platform does not use UEFI (and modifying the loader configuration 2189 # does load sysconf); however because no updates (fixes) are available, most 2190 # developers will regard that as unsupported. 2191 # 2192 # With FreeBSD 13, even when syscons is loaded (e.g., with the i386 platform), 2193 # its function-keys are not configured. Using 2194 # vidcontrol -T cons25 2195 # repairs this. 2196 # 2197 # When teken is loaded, vidcontrol can switch at runtime between the 2198 # teken/cons25 function keys: 2199 # vidcontrol -T cons25 2200 # vidcontrol -T xterm 2201 # However due to a limitation in the implementation, only the first 12 function 2202 # keys are available. The real syscons supports 48 function keys (using the 2203 # shift and control modifiers), while xterm supports more than twice as many. 2204 # 2205 # vidcontrol does not change the emulation. As a result, the quarter (17/73) of 2206 # non-function key capabilities which differ between syscons and teken are 2207 # unsupported in the UEFI-based configurations. 2208 # 2209 # tack: 2210 # VT100 line-drawing does not work (UTF-8 equivalents do). 2211 # Shift/control modifiers have no effect on special keys. 2212 # Meta does not work. 2213 # vttest: 2214 # supports REP (repeat). 2215 # still does not support left/right margins 2216 # SU/SD work, but not SL/SR 2217 # alternate screen does not work 2218 # ENQ/DA1 is unimplemented (the terminal does not identify itself) 2219 # CPR, XCPR are unimplemented (i.e., vttest and resize are broken) 2220 # implements X11 (original) xterm-mouse. 2221 # ncurses: 2222 # UTF-8 line-drawing works, including some double/thick lines 2223 # 2224 # For FreeBSD 9 and 10: 2225 # -------------------- 2226 # The /etc/ttys entries for console and other ttys are all configured to set 2227 # TERM=xterm. 2228 # 2229 # Testing with tack: 2230 # There is no VT100 line-drawing (uses +'s and -'s) 2231 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys 2232 # 2233 # Testing with vttest: 2234 # Menu 2 diamonds don't work, blink ditto, light background ditto 2235 # The terminal identifies itself as VT100 with AVO 2236 # There is no VT52 support 2237 # There is no doublesize character support 2238 # The terminal supports ECH (like rxvt) 2239 # The terminal does not support send/receive mode 2240 # The terminal supports all of the ISO-6429 cursor-movement 2241 # The terminal supports some of the ISO-6429 miscellaneous tests 2242 # (SL/SR also leave unexpected char on screen too) 2243 # 2244 # Considering cons25 as a base, the line-drawing mostly works, but is missing 2245 # the cells which happen to have ASCII control-character values: 2246 # - ^X arrow pointing up 2247 # . ^Y arrow pointing down 2248 # i ^Y lantern 2249 # ` ^D diamond 2250 # 2251 # Those are removed from this entry's acsc string to avoid confusion. 2252 # The resulting description provides correct line-drawing and function-keys -TD 2253 teken-2018|teken as of 2018, 2254 bw@, mir, xenl, NQ, 2255 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q 2256 \304t\303u\264v\301w\302x\263y\363z\362~\371, 2257 cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kdch1=\E[3~, kent=\r, 2258 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, 2259 kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 2260 kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2261 rmir=\E[4l, smir=\E[4h, tbc=\E[3g, use=vt220+cvis, 2262 use=cons25, 2263 2264 teken-2022|teken as of 2022, 2265 am, bce, eo, mir, msgr, npc, NQ, 2266 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, U8#1, 2267 bold=\E[1m, cr=\r, cub1=^H, dim=\E[30;1m, ech=\E[%p1%dX, 2268 ind=\E[S, kbs=^H, kent=\r, nel=\E[E, op=\E[x, rev=\E[7m, 2269 ri=\E[T, rmso=\E[27m, rs2=\E[x\E[m\Ec, setab=\E[4%p1%dm, 2270 setaf=\E[3%p1%dm, 2271 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p5%t;30;1%;%?%p6%t;1%;m, 2272 sgr0=\E[m, use=vt220+cvis, use=ecma+index, 2273 use=ansi+arrows, use=ansi+csr, use=ansi+cup, 2274 use=ansi+erase, use=ansi+idc, use=ansi+idl, 2275 use=ansi+local, use=ansi+rca2, use=ansi+sgrso, 2276 use=ansi+tabs, 2277 2278 teken-vt+fkeys|teken's xterm special keys, 2279 kdch1=\E[3~, kend=\E[F, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 2280 kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 2281 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 2282 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2283 2284 teken-sc+fkeys|teken's syscons special keys, 2285 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 2286 kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, 2287 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, 2288 knp=\E[G, kpp=\E[I, 2289 2290 teken-sc|teken imitating syscons, 2291 use=teken-sc+fkeys, use=teken-2022, 2292 2293 teken|teken-vt|teken imitating xterm, 2294 xenl, use=teken-vt+fkeys, use=xterm+x11mouse, 2295 use=teken-2022, 2296 2297 teken-16color|teken using 16 colors, 2298 use=ibm+16color, use=teken, 2299 2300 #### 386BSD and BSD/OS Consoles 2301 # 2302 2303 # This was the original 386BSD console entry (I think). 2304 # Some places it's named oldpc3|oldibmpc3. 2305 # From: Alex R.N. Wetmore <aw2t (at] andrew.cmu.edu> 2306 origpc3|origibmpc3|IBM PC 386BSD console, 2307 OTbs, am, bw, eo, xon, 2308 cols#80, lines#25, 2309 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x 2310 \263, 2311 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 2312 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 2313 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2314 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, 2315 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, 2316 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, 2317 2318 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI) 2319 oldpc3|oldibmpc3|old IBM PC BSD/386 console, 2320 OTbs, km, 2321 lines#25, 2322 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M, 2323 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2324 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, 2325 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R, 2326 2327 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 2328 # Note, the emulator supports many of the additional console features 2329 # listed in the iBCS2 (e.g. character-set selection) though not all 2330 # are described here. This entry really ought to be upgraded. 2331 # Also note, the console will also work with fewer lines after doing 2332 # "stty rows NN", e.g. to use 24 lines. 2333 # (Color support from Kevin Rosenberg <kevin (at] cyberport.com>, 2 May 1996) 2334 # Bug: The <op> capability resets attributes. 2335 bsdos-pc|IBM PC BSD/OS console, 2336 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6 2337 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 2338 use=bsdos-pc-nobold, 2339 2340 bsdos-pc-nobold|BSD/OS PC console w/o bold, 2341 use=klone+color, use=bsdos-pc-m, 2342 2343 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, 2344 OTbs, am, eo, km, xon, 2345 cols#80, it#8, lines#25, 2346 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H, 2347 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 2348 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2349 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 2350 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, 2351 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, 2352 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7, 2353 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7 2354 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, 2355 use=klone+sgr8, 2356 2357 # Old names for BSD/OS PC console used in releases before 4.1. 2358 pc3|BSD/OS on the PC console, 2359 use=bsdos-pc-nobold, 2360 ibmpc3|pc3-bold|BSD/OS on the PC console with bold instead of underline, 2361 use=bsdos-pc, 2362 2363 # BSD/OS on the SPARC 2364 bsdos-sparc|Sun SPARC BSD/OS console, 2365 use=sun, 2366 2367 # BSD/OS on the PowerPC 2368 bsdos-ppc|PowerPC BSD/OS console, 2369 use=bsdos-pc, 2370 2371 2372 #### DEC VT52 2373 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) 2374 # 2375 # Actually (TD pointed this out at the time the acsc string was added): 2376 # VT52 shouldn't define full acsc since most of the cells don't match. 2377 # see VT100 manual page A-31. This is the list that does match: 2378 # f degree 2379 # g plus/minus 2380 # h right-arrow 2381 # k down-arrow 2382 # m scan-1 2383 # o scan-3 2384 # q scan-5 2385 # s scan-7 2386 # The line-drawing happens to work in several terminal emulators, but should 2387 # not be used as a guide to the capabilities of the VT52. Note in particular 2388 # that VT52 does not support line-drawing characters (the scan-X values refer 2389 # to a crude plotting feature) -TD 2390 vt52|DEC VT52, 2391 OTbs, 2392 it#8, lines#24, 2393 acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n, 2394 ri=\EI, rmacs=\EG, rmkx=\E>, smacs=\EF, smkx=\E=, u8=\E/[KL], 2395 use=vt50h, 2396 2397 # This is more likely the "vt52" that you would see in emulation, i.e., no 2398 # keypad, no graphics. 2399 vt52-basic|VT52 for emulators, 2400 cols#80, it#8, lines#24, 2401 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC, 2402 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 2403 home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, 2404 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, 2405 2406 #### DEC VT100 and compatibles 2407 # 2408 # DEC terminals from the VT100 forward are collected here. Older DEC terminals 2409 # and micro consoles can be found in the `obsolete' section. More details on 2410 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be 2411 # found near the end of this file. 2412 # 2413 # Except where noted, these entries are DEC's official terminfos. 2414 # Contact Bill Hedberg <hedberg (at] hannah.enet.dec.com> of Terminal Support 2415 # Engineering for more information. Updated terminfos and termcaps 2416 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 2417 # 2418 # In October 1995 DEC sold its terminals business, including the VT and Dorio 2419 # line and trademark, to SunRiver Data Systems. SunRiver has since changed 2420 # its name to Boundless Technologies; see http://www.boundless.com. 2421 # 2422 2423 # NOTE: Any VT100 emulation, whether in hardware or software, almost 2424 # certainly includes what DEC called the `Level 1 editing extension' codes; 2425 # only the very oldest VT100s lacked these and there probably aren't any of 2426 # those left alive. To capture these, use one of the VT102 entries. 2427 # 2428 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, 2429 # since the cursor is left in a different position while in the 2430 # weird state (concept at beginning of next line, vt100 at end 2431 # of this line) so all versions of vi before 3.7 don't handle 2432 # <xenl> right on vt100. The correct way to handle <xenl> is when 2433 # you output the char in column 80, immediately output CR LF 2434 # and then assume you are in column 1 of the next line. If <xenl> 2435 # is on, am should be on too. 2436 # 2437 # I assume you have smooth scroll off or are at a slow enough baud 2438 # rate that it doesn't matter (1200? or less). Also this assumes 2439 # that you set auto-nl to "on", if you set it off use vt100-nam 2440 # below. 2441 # 2442 # The padding requirements listed here are guesses. It is strongly 2443 # recommended that xon/xoff be enabled, as this is assumed here. 2444 # 2445 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 2446 # tab settings are in non-volatile memory and don't need to be 2447 # reset upon login. Also setting the number of columns glitches 2448 # the screen annoyingly. You can type "reset" to get them set. 2449 # 2450 # The VT100 series terminals have cursor ("arrows") keys which can operate 2451 # in two different modes: Cursor Mode and Application Mode. Cursor Mode 2452 # is the reset state, and is assumed to be the normal state. Application 2453 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit 2454 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application 2455 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode 2456 # was provided primarily as an aid to the porting of VT52 applications. It is 2457 # assumed that the cursor keys are normally in Cursor Mode, and expected that 2458 # applications such as vi will always transmit the <smkx> string. Therefore, 2459 # the definitions for the cursor keys are made to match what the terminal 2460 # transmits after the <smkx> string is transmitted. If the <smkx> string 2461 # is a null string or is not defined, then cursor keys are assumed to be in 2462 # "Cursor Mode", and the cursor keys definitions should match that assumption, 2463 # else the application may fail. It is also expected that applications will 2464 # always transmit the <rmkx> string to the terminal before they exit. 2465 # 2466 # The VT100 series terminals have an auxiliary keypad, commonly referred to as 2467 # the "Numeric Keypad", because it is a cluster of numeric and function keys. 2468 # The Numeric Keypad which can operate in two different modes: Numeric Mode and 2469 # Application Mode. Numeric Mode is the reset state, and is assumed to be 2470 # the normal state. Application Mode is the "set" state. In Numeric Mode, 2471 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the 2472 # Enter key transmits the same as the Return key (Note: the Return key 2473 # can be configured to send either LF (\015) or CR LF). In Application Mode, 2474 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys 2475 # always send the same "Esc O {code}" sequences. It is assumed that the keypad 2476 # is normally in Numeric Mode. If an application requires that the keypad be 2477 # in Application Mode then it is expected that the user, or the application, 2478 # will set the TERM environment variable to point to a terminfo entry which has 2479 # defined the <smkx> string to include the codes that switch the keypad into 2480 # Application Mode, and the terminfo entry will also define function key 2481 # fields to match the Application Mode control codes. If the <smkx> string 2482 # is a null string or is not defined, then the keypad is assumed to be in 2483 # Numeric Mode. If the <smkx> string switches the keypad into Application 2484 # Mode, it is expected that the <rmkx> string will contain the control codes 2485 # necessary to reset the keypad to "Normal" mode, and it is also expected that 2486 # applications which transmit the <smkx> string will also always transmit the 2487 # <rmkx> string to the terminal before they exit. 2488 # 2489 # Here's a diagram of the VT100 keypad keys with their bindings. 2490 # The top line is the name of the key (some DEC keyboards have the keys 2491 # labelled somewhat differently, like GOLD instead of PF1, but this is 2492 # the most "official" name). The second line is the escape sequence it 2493 # generates in Application Keypad mode (where "$" means the ESC 2494 # character). The third line contains two items, first the mapping of 2495 # the key in terminfo, and then in termcap. 2496 # _______________________________________ 2497 # | PF1 | PF2 | PF3 | PF4 | 2498 # | $OP | $OQ | $OR | $OS | 2499 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2500 # | 7 8 9 - | 2501 # | $Ow | $Ox | $Oy | $Om | 2502 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| 2503 # | 4 | 5 | 6 | , | 2504 # | $Ot | $Ou | $Ov | $Ol | 2505 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| 2506 # | 1 | 2 | 3 | | 2507 # | $Oq | $Or | $Os | enter | 2508 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | 2509 # | 0 | . | | 2510 # | $Op | $On | | 2511 # |___kc1_______K4____|_kc3__K5_|_kent_@8_| 2512 # 2513 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the 2514 # terminfo guidelines. That is a compromise used to assign the remaining 2515 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap 2516 # support: 2517 vt100+keypad|DEC VT100 numeric keypad no fkeys, 2518 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, 2519 vt100+pfkeys|DEC VT100 numeric keypad (kf1-kf4), 2520 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 2521 use=vt100+keypad, 2522 vt100+fnkeys|DEC VT100 numeric keypad (kf0-kf10), 2523 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, 2524 kf9=\EOw, use=vt100+pfkeys, 2525 # 2526 # A better adaptation to modern keyboards such as the PC's, which have a dozen 2527 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to 2528 # use the 5-key arrangement to model the arrow keys as suggested in the 2529 # terminfo guidelines: 2530 # _______________________________________ 2531 # | PF1 | PF2 | PF3 | PF4 | 2532 # | $OP | $OQ | $OR | $OS | 2533 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2534 # | 7 8 9 - | 2535 # | $Ow | $Ox | $Oy | $Om | 2536 # |_ka1__K1_|_________|_ka3__K3_|_________| 2537 # | 4 | 5 | 6 | , | 2538 # | $Ot | $Ou | $Ov | $Ol | 2539 # |_________|_kb2__K2_|_________|_________| 2540 # | 1 | 2 | 3 | | 2541 # | $Oq | $Or | $Os | enter | 2542 # |_kc1__K4_|_________|_kc3__K5_| $OM | 2543 # | 0 | . | | 2544 # | $Op | $On | | 2545 # |___________________|_________|_kent_@8_| 2546 # 2547 vt220+keypad|DEC VT220 numeric keypad, 2548 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, 2549 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, 2550 kb3=\EOv, kc2=\EOr, 2551 # 2552 vt100+enq|ncurses extension for VT100-style ENQ, 2553 u8=\E[?1;2c, use=ansi+enq, 2554 vt102+enq|ncurses extension for VT102-style ENQ, 2555 u8=\E[?6c, use=ansi+enq, 2556 # 2557 # And here, for those of you with orphaned VT100s lacking documentation, is 2558 # a description of the soft switches invoked when you do `Set Up'. 2559 # 2560 # Scroll 0-Jump Shifted 3 0-# 2561 # | 1-Smooth | 1-British pound sign 2562 # | Autorepeat 0-Off | Wrap Around 0-Off 2563 # | | 1-On | | 1-On 2564 # | | Screen 0-Dark Bkg | | New Line 0-Off 2565 # | | | 1-Light Bkg | | | 1-On 2566 # | | | Cursor 0-Underline | | | Interlace 0-Off 2567 # | | | | 1-Block | | | | 1-On 2568 # | | | | | | | | 2569 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings 2570 # | | | | | | | | 2571 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz 2572 # | | | 1-On | | | 1-50 Hz 2573 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits 2574 # | | 1-ANSI | | 1-8 Bits 2575 # | Keyclick 0-Off | Parity 0-Off 2576 # | 1-On | 1-On 2577 # Margin Bell 0-Off Parity Sense 0-Odd 2578 # 1-On 1-Even 2579 # 2580 # The following SET-UP modes are assumed for normal operation: 2581 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS 2582 # WRAP_AROUND_ON JUMP_SCROLL_OFF 2583 # Other SET-UP modes may be set for operator convenience or communication 2584 # requirements; I recommend 2585 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# 2586 # Unless you have a graphics add-on such as Digital Engineering's VT640 2587 # (and even then, whenever it can be arranged!) you should set 2588 # INTERLACE_OFF 2589 # 2590 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) 2591 vt100|vt100-am|DEC VT100 (w/advanced video), 2592 OTbs, mc5i, xenl, xon, 2593 vt#3, 2594 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB, 2595 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 2596 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l, 2597 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r, 2598 sc=\E7, 2599 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 2600 %;m%?%p9%t\016%e\017%;$<2>, 2601 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>, 2602 use=decid+cpr, use=vt100+4bsd, use=vt100+fnkeys, 2603 vt100+4bsd|DEC VT100 from 4.0BSD, 2604 am, msgr, 2605 cols#80, it#8, lines#24, 2606 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2607 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2608 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H, 2609 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>, 2610 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 2611 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 2612 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, 2613 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2614 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>, 2615 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2616 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 2617 %;m%?%p9%t\016%e\017%;$<2>, 2618 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>, 2619 smul=\E[4m$<2>, tbc=\E[3g, 2620 vt100nam|vt100-nam|VT100 no automargins, 2621 am@, xenl@, 2622 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am, 2623 vt100-vb|DEC VT100 (w/advanced video) & no beep, 2624 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100, 2625 2626 # Ordinary VT100 in 132 column ("wide") mode. 2627 vt100-w|vt100-w-am|DEC VT100 132 cols (w/advanced video), 2628 cols#132, lines#24, 2629 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, 2630 vt100-w-nam|vt100-nam-w|DEC VT100 132 cols (w/advanced video no automargin), 2631 cols#132, lines#14, vt@, 2632 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, 2633 2634 # VT100 with no advanced video. 2635 vt100-nav|VT100 without advanced video option, 2636 xmc#1, 2637 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, 2638 smul@, use=vt100, 2639 vt100-nav-w|vt100-w-nav|DEC VT100 132 cols 14 lines (no advanced video option), 2640 cols#132, lines#14, use=vt100-nav, 2641 2642 # VT100 with one of the 24 lines used as a status line. 2643 # We put the status line on the top. 2644 vt100-s|vt100-s-top|vt100-top-s|VT100 for use with top sysline, 2645 eslok, hs, 2646 lines#23, 2647 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, 2648 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, 2649 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, 2650 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, 2651 2652 # Status line at bottom. 2653 # Clearing the screen will clobber status line. 2654 vt100-s-bot|vt100-bot-s|VT100 for use with bottom sysline, 2655 eslok, hs, 2656 lines#23, 2657 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, 2658 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, 2659 2660 # Most of the `vt100' emulators out there actually emulate a VT102 2661 # This entry (or vt102-nsgr) is probably the right thing to use for 2662 # these. 2663 vt102|DEC VT102, 2664 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, 2665 use=vt100, 2666 vt102-w|DEC VT102 in wide mode, 2667 cols#132, 2668 rs3=\E[?3h, use=vt102, 2669 2670 # Many brain-dead PC comm programs that pretend to be `vt100-compatible' 2671 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> 2672 # string in the canonical vt100 entry above leaves the screen littered 2673 # with little snowflake or star characters (IBM PC ROM character \017 = ^O) 2674 # after highlight turnoffs. This entry should fix that, and even leave 2675 # ACS support working, at the cost of making multiple-highlight changes 2676 # slightly more expensive. 2677 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> July 22 1995 2678 vt102-nsgr|VT102 no sgr (use if you see snowflakes after highlight changes), 2679 sgr@, sgr0=\E[m, use=vt102, 2680 2681 # VT125 Graphics CRT. Clear screen also erases graphics 2682 # Some VT125's came configured with VT102 support. 2683 vt125|VT125 graphics terminal, 2684 mir, 2685 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 2686 2687 # This isn't a DEC entry, it came from University of Wisconsin. 2688 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) 2689 vt131|DEC VT131, 2690 OTbs, am, xenl, 2691 cols#80, it#8, lines#24, vt#3, 2692 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 2693 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 2694 cub1=^H, cud1=\n, cuf1=\E[C$<2/>, 2695 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 2696 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 2697 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 2698 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 2699 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, 2700 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, 2701 rmul=\E[m$<2/>, 2702 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2703 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, 2704 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 2705 2706 # vt132 - like vt100 but slower and has ins/del line and such. 2707 # I'm told that <smir>/<rmir> are backwards in the terminal from the 2708 # manual and from the ANSI standard, this describes the actual 2709 # terminal. I've never actually used a vt132 myself, so this 2710 # is untested. 2711 # 2712 vt132|DEC VT132, 2713 xenl, 2714 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 2715 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, 2716 2717 # This vt220 description maps F5--F9 to the second block of function keys 2718 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict 2719 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. 2720 # PF1--PF4 are used as F1--F4. 2721 # 2722 # added msgr -TD 2723 vt220-old|vt200-old|DEC VT220 in VT100 emulation mode, 2724 OTbs, OTpt, am, mir, msgr, xenl, xon, 2725 cols#80, lines#24, vt#3, 2726 OTnl=\n, 2727 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2728 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2729 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 2730 cub1=^H, cud1=\E[B, cuf1=\E[C, 2731 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 2732 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 2733 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, 2734 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2735 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, 2736 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, 2737 kf8=\E[20~, kf9=\E[21~, kich1=\E[2~, rc=\E8, rev=\E[7m$<2>, 2738 rf=/usr/share/tabset/vt100, ri=\EM$<14/>, 2739 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, 2740 rmul=\E[24m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2741 sc=\E7, 2742 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 2743 %p9%t\E(0%e\E(B%;$<2>, 2744 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2745 smso=\E[7m, smul=\E[4m, use=vt220+pcedit, use=vt220+cvis, 2746 2747 # Here's a picture of the Sun/PC editing keypad: 2748 # +--------+--------+--------+ 2749 # | Insert | Home | PageUp | 2750 # +--------+--------+--------+ 2751 # | Delete | End | PageDn | 2752 # +--------+--------+--------+ 2753 # 2754 # VT220 emulators such as xterm, using PC-keyboards use a different layout than 2755 # the VT220 keyboard: 2756 # VT220 PC 2757 # ----- -- 2758 # Prev PageUp 2759 # Next PageDn 2760 # Insert Insert 2761 # Remove Delete 2762 # Find Home 2763 # Select End 2764 vt220+pcedit|editing-keypad for VT220 using PC keyboard, 2765 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, 2766 knp=\E[6~, kpp=\E[5~, 2767 vt220+vtedit|editing-keypad for VT220 using DEC keyboard, 2768 kdch1=\E[3~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2769 kslt=\E[4~, 2770 2771 # A much better description of the VT200/220; used to be vt220-8 2772 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 2773 # designation to accommodate bug in pcvt -TD 2774 # 2775 # Here's a picture of the VT220 editing keypad: 2776 # +--------+--------+--------+ 2777 # | Find | Insert | Remove | 2778 # +--------+--------+--------+ 2779 # | Select | Prev | Next | 2780 # +--------+--------+--------+ 2781 # 2782 # Still, this is a "base" entry. Software emulators commonly leave out the 2783 # DECTCEM feature -TD 2784 vt220-base|DEC VT220 as emulated, 2785 OTbs, am, mir, msgr, xenl, xon, 2786 cols#80, it#8, lines#24, vt#3, 2787 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2788 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 2789 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2790 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 2791 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2792 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2793 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 2794 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 2795 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 2796 il=\E[%p1%dL, il1=\E[L, ind=\ED, 2797 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D, 2798 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, 2799 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 2800 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2801 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 2802 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, 2803 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE, 2804 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, 2805 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, 2806 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 2807 %p9%t\E(0%e\E(B%;$<2>, 2808 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 2809 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+vtedit, 2810 use=ansi+pp, use=ansi+enq, 2811 vt220|vt200|DEC VT220, 2812 use=vt220+cvis, use=vt220-base, 2813 vt220-w|vt200-w|DEC VT220 in wide mode, 2814 cols#132, 2815 rs3=\E[?3h, use=vt220, 2816 vt220-8bit|vt220-8|vt200-8bit|vt200-8|DEC VT220/200 in 8-bit mode, 2817 OTbs, am, mc5i, mir, msgr, xenl, xon, 2818 cols#80, it#8, lines#24, vt#3, 2819 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2820 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r, 2821 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 2822 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C, 2823 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 2824 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 2825 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, 2826 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, 2827 ich=\233%p1%d@, if=/usr/share/tabset/vt100, 2828 il=\233%p1%dL, il1=\233L, ind=\ED, 2829 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H, 2830 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 2831 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~, 2832 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~, 2833 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~, 2834 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~, 2835 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H, 2836 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~, 2837 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, 2838 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM, 2839 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m, 2840 rmul=\23324m, rs1=\233?3l, sc=\E7, 2841 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m 2842 %?%p9%t\E(0%e\E(B%;$<2>, 2843 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, 2844 smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8, 2845 2846 # vt220d: 2847 # This VT220 description regards F6--F10 as the second block of function keys 2848 # at the top of the keyboard. This mapping follows the description given 2849 # in the VT220 Programmer Reference Manual and agrees with the labeling 2850 # on some terminals that emulate the VT220. There is no support for an F5. 2851 # See vt220 for an alternate mapping. 2852 # 2853 vt220d|DEC VT220 in VT100 mode with DEC function key labeling, 2854 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 2855 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 2856 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, 2857 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, 2858 2859 vt220-nam|v200-nam|VT220 in VT100 mode with no auto margins, 2860 am@, 2861 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 2862 2863 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko 2864 # (not an official DEC entry!) 2865 # The problem with real VT220 terminals is they don't send escapes when in 2866 # in VT220 mode. This can be gotten around two ways. 1> don't send 2867 # escapes or 2> put the VT220 into VT100 mode and use all the nifty 2868 # features of VT100 advanced video which it then has. 2869 # 2870 # This entry takes the view of putting a VT220 into VT100 mode so 2871 # you can use the escape key in emacs and everything else which needs it. 2872 # 2873 # You probably don't want to use this on a VMS machine since VMS will think 2874 # it has a VT220 and will get fouled up coming out of emacs 2875 # 2876 # From: Alexander Latzko <latzko (at] marsenius.rutgers.edu>, 30 Dec 1996 2877 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) 2878 # added msgr -TD 2879 vt200-js|vt220-js|DEC VT200 series with jump scroll, 2880 am, msgr, 2881 cols#80, 2882 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, 2883 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2884 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 2885 ht=^I, il1=\E[L, ind=\ED, 2886 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[ 2887 ?25h\E>\E[m, 2888 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2889 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8, 2890 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, 2891 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, 2892 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, 2893 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, 2894 use=vt220+cvis, 2895 2896 # This was DEC's VT320. Use the purpose-built one below instead 2897 #vt320|DEC VT320 in VT100 emulation mode, 2898 # use=vt220, 2899 2900 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. 2901 # 2902 vt320nam|v320n|DEC VT320 in VT100 emul. mode with NO AUTO WRAP mode, 2903 am@, 2904 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, 2905 use=vt220-base, 2906 2907 # These entries are not DEC's official ones, they were purpose-built for the 2908 # VT320. Here are the designer's notes: 2909 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to 2910 # 'Erase to End of Field'... since nothing seems to use 'end' anyways... 2911 # khome is Home on a PC kbd. Actually 'FIND' on a VT. 2912 # Things that use <knxt> usually use tab anyways... and things that don't use 2913 # tab usually use <knxt> instead... 2914 # kprv is same as tab - Backtab is useless... 2915 # I left out <sgr> because of its RIDICULOUS complexity, 2916 # and the resulting fact that it causes the termcap translation of the entry 2917 # to SMASH the 1k-barrier... 2918 # From: Adam Thompson <athompso (at] pangea.ca> Sept 10 1995 2919 # (vt320: uncommented <fsl> --esr) 2920 vt320|vt300|DEC VT320 7 bit terminal, 2921 am, mir, msgr, xenl, 2922 cols#80, lines#24, wsl#80, 2923 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2924 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 2925 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2926 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 2927 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2928 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2929 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 2930 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 2931 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2932 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2933 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, 2934 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2935 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2936 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2937 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, 2938 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, 2939 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 2940 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 2941 rmul=\E[m, 2942 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2943 sc=\E7, 2944 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 2945 %p9%t\E(0%e\E(B%;$<2>, 2946 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2947 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2948 use=dec+pp, use=vt220+cvis, use=vt220+keypad, use=dec+sl, 2949 use=ansi+enq, 2950 vt320-nam|vt300-nam|DEC VT320 7 bit terminal with no am to make SAS happy, 2951 am@, 2952 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2953 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320, 2954 # We have to init 132-col mode, not 80-col mode. 2955 vt320-w|vt300-w|DEC VT320 wide 7 bit terminal, 2956 cols#132, wsl#132, 2957 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 2958 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320, 2959 vt320-w-nam|vt300-w-nam|DEC VT320 wide 7 bit terminal with no am, 2960 am@, 2961 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 2962 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w, 2963 2964 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals 2965 # which are pretty much a superset of the VT320. They have the 2966 # host writable status line, yet another different DRCS matrix size, 2967 # and such, but they add the DEC Technical character set, Multiple text 2968 # pages, selectable length pages, and the like. The difference between 2969 # the VT330 and VT340 is that the former has only 2 planes and a monochrome 2970 # monitor, the latter has 4 planes and a color monitor. These terminals 2971 # support VT131 and ANSI block mode, but as with much of these things, 2972 # termcap/terminfo doesn't deal with these features. 2973 # 2974 # Note that this entry is are set up in what was the standard way for GNU 2975 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow 2976 # keys were switched into application mode at the same time the numeric pad 2977 # is switched into application mode. This changes the definitions of the 2978 # arrow keys. Emacs v19 is smarter and mines its keys directly out of 2979 # your termcap or terminfo entry, 2980 # 2981 # From: Daniel Glasser <dag (at] persoft.persoft.com>, 13 Oct 1993 2982 # (vt340: string capability "sb=\E[M" corrected to "sr"; 2983 # also, added <rmam>/<smam> based on the init string -- esr) 2984 vt340|dec-vt340|vt330|dec-vt330|DEC VT340 graphics terminal with 24 line page, 2985 am, eslok, hs, mir, msgr, xenl, xon, 2986 cols#80, it#8, lines#24, vt#3, 2987 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2988 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 2989 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2990 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 2991 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2992 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 2993 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 2994 flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, 2995 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 2996 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r 2997 \E[24;1H, 2998 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2999 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 3000 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 3001 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m, 3002 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 3003 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 3004 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 3005 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 3006 %p9%t\E(0%e\E(B%;$<2>, 3007 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 3008 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3009 tsl=\E[2$~\E[1$}\E[1;%dH, use=vt220+cvis, 3010 3011 # Left/right margins are supported in xterm since patch #279 (2012/05/10) 3012 vt420+lrmm|VT420 left/right margins, 3013 mgc=\E[?69l, smglp=\E[?69h\E[%i%p1%ds, 3014 smglr=\E[?69h\E[%i%p1%d;%p2%ds, 3015 smgrp=\E[?69h\E[%i;%p1%ds, 3016 3017 # DEC doesn't supply a VT400 description, so we add Daniel Glasser's 3018 # (originally written with VT420 as its primary name, and usable for it). 3019 # 3020 # VT400/420 -- This terminal is a superset of the VT320. It adds the multiple 3021 # text pages and long text pages with selectable length of the VT340, along 3022 # with left and right margins, rectangular area text copy, fill, and erase 3023 # operations, selected region character attribute change operations, 3024 # page memory and rectangle checksums, insert/delete column, reception 3025 # macros, and other features too numerous to remember right now. TERMCAP 3026 # can only take advantage of a few of these added features. 3027 # 3028 # Note that this entry is set up in what was the standard way for GNU 3029 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow 3030 # keys were switched into application mode at the same time the numeric pad 3031 # is switched into application mode. This changes the definitions of the 3032 # arrow keys. Emacs v19 is smarter and mines its keys directly out of 3033 # your termcap entry, 3034 # 3035 # From: Daniel Glasser <dag (at] persoft.persoft.com>, 13 Oct 1993 3036 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; 3037 # also, added <rmam>/<smam> based on the init string -- esr) 3038 vt400|vt400-24|dec-vt400|DEC VT400 24x80 column autowrap, 3039 am, eslok, mir, msgr, xenl, xon, 3040 cols#80, it#8, lines#24, vt#3, 3041 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3042 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J$<10/>, cr=\r, 3043 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3044 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 3045 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3046 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3047 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 3048 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, 3049 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3050 il=\E[%p1%dL, il1=\E[L, ind=\ED, 3051 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r 3052 \E[24;1H, 3053 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3054 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 3055 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 3056 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m, 3057 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 3058 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 3059 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, 3060 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 3061 %p9%t\E(0%e\E(B%;$<2>, 3062 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 3063 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3064 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, use=vt220+cvis, 3065 3066 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored 3067 # a missing <sc> -- esr) 3068 # add msgr and other capabilities from vt220 -TD 3069 vt420|DEC VT420, 3070 am, mir, msgr, xenl, xon, 3071 cols#80, it#8, lines#24, vt#3, 3072 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3073 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 3074 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 3075 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 3076 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>, 3077 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 3078 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<50>, 3079 el=\E[K$<3>, el1=\E[1K, enacs=\E)0, 3080 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 3081 ich=\E[%p1%d@, if=/usr/share/tabset/vt300, 3082 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H, 3083 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, 3084 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, 3085 kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, 3086 kf8=\E[20~, kf9=\E[21~, nel=\EE, rc=\E8, rev=\E[7m$<2>, 3087 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, 3088 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 3089 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 3090 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7, 3091 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 3092 %p9%t\E(0%e\E(B%;$<2>, 3093 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h, 3094 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3095 use=vt220+vtedit, use=ansi+pp, use=dec+sl, use=ansi+enq, 3096 use=vt220+cvis, use=vt420+lrmm, 3097 3098 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) 3099 # takes two parameters, the key and the string. Translating the key is 3100 # straightforward (keys 1-5 are not defined on real terminals, though some 3101 # emulators define these): 3102 # 3103 # if (key < 16) then value = key; 3104 # else if (key < 21) then value = key + 1; 3105 # else if (key < 25) then value = key + 2; 3106 # else if (key < 27) then value = key + 3; 3107 # else if (key < 30) then value = key + 4; 3108 # else value = key + 5; 3109 # 3110 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 3111 # There's no provision in terminfo for emitting a string in this format, so the 3112 # application has to know it. 3113 # 3114 vt420pc|DEC VT420 w/PC keyboard, 3115 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3116 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, 3117 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~, 3118 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~, 3119 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~, 3120 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~, 3121 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~, 3122 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~, 3123 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~, 3124 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~, 3125 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~, 3126 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~, 3127 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 3128 pctrm=USR_TERM:vt420pcdos:, 3129 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%> 3130 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+ 3131 %d/%p2%s\E\\, 3132 use=vt420, 3133 3134 vt420pcdos|DEC VT420 w/PC for DOS Merge, 3135 lines#25, 3136 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1 3137 %{127}%=%t\E\177%e%p1%c%;, 3138 pctrm@, 3139 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, 3140 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, 3141 3142 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, 3143 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3144 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3145 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3146 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 3147 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3148 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, 3149 use=vt420, 3150 3151 vt510|DEC VT510, 3152 use=vt420, 3153 vt510pc|DEC VT510 w/PC keyboard, 3154 use=vt420pc, 3155 vt510pcdos|DEC VT510 w/PC for DOS Merge, 3156 use=vt420pcdos, 3157 3158 # VT520/VT525 3159 # 3160 # The VT520 is a monochrome text terminal capable of managing up to 3161 # four independent sessions in the terminal. It has multiple ANSI 3162 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) 3163 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, 3164 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. 3165 # 3166 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or 3167 # [Alt]/[Print Screen] depending upon which keyboard and which 3168 # terminal mode is being used. If Set-Up has been disabled or 3169 # assigned to an unknown key, Set-Up may be entered by pressing 3170 # [F3] as the first key after power up, regardless of keyboard type. 3171 vt520|DEC VT520, 3172 use=ansi+rca, use=vt420, use=ansi+tabs, 3173 3174 vt525|DEC VT525, 3175 use=vt520, 3176 3177 # I just got a brand new Boundless VT520 with that company's "ANSI 2011" 3178 # Keyboard, which replaces the old LK41R-AA keyboard. 3179 # 3180 # In trying to get the function keys to work, I had to cobble my own 3181 # terminfo.src entry, since the existing vt520 entry doesn't include most of 3182 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad" 3183 # I seem to get them all -Mike Gran 3184 vt520ansi|Boundless VT520 ANSI, 3185 use=ansi+rca, use=vt420f, use=vt220+keypad, 3186 use=ansi+tabs, 3187 3188 #### VT100 emulations 3189 3190 # John Hawkinson <jhawk (at] MIT.EDU> tells us that the EWAN telnet for Windows 3191 # (the best Windows telnet as of September 1995) presents the name `dec-vt100' 3192 # to telnetd. Michael Deutschmann <ldeutsch (at] mail.netshop.net> informs us 3193 # that this works best with a stock vt100 entry. 3194 dec-vt100|EWAN telnet's vt100 emulation, 3195 use=vt100, 3196 3197 # From: Adrian Garside <94ajg2 (at] eng.cam.ac.uk>, 19 Nov 1996 3198 dec-vt220|DOS tnvt200 terminal emulator, 3199 am@, use=vt220, 3200 3201 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to 3202 # anyone who needs PC VT340 emulation. (or anything below that level, for 3203 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's 3204 # RDBM systems, it includes ReGIS and Sixel support! I'm impressed... 3205 # I can send the address if requested. 3206 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) 3207 # From: Adam Thompson <athompso (at] pangea.ca> Sept 10 1995 3208 z340|ZSTEM VT340 terminal emulator 132col 42line, 3209 lines#42, 3210 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 3211 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w, 3212 z340-nam|ZSTEM VT340 terminal emulator 132col 42line (no automatic margins), 3213 am@, 3214 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 3215 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340, 3216 3217 # expect-5.44.1.15/example/tkterm 3218 # a minimal subset of a VT100 (compare with "news-unk). 3219 # 3220 # The missing "=" in smkx is not a typo (here), but an error in tkterm. 3221 tt|tkterm|Don Libes' tk text widget terminal emulator, 3222 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 3223 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ, 3224 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 3225 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E, 3226 smso=\E[7m, 3227 3228 ######## APPLE 3229 3230 #### Terminal.app 3231 3232 # nsterm*|Apple_Terminal - AppKit Terminal.app 3233 # 3234 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and 3235 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X 3236 # Server and Mac OS X operating systems. There is also a 3237 # "terminal.app" in GNUstep, but I believe it to be an unrelated 3238 # codebase and I have not attempted to describe it here. 3239 # 3240 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you 3241 # are pretty much on your own. Use "nsterm-7-m" and hope for the best. 3242 # You might also try "nsterm-7" and "nsterm-old" if you suspect your 3243 # version supports color. 3244 # 3245 # To determine the version of Terminal.app you're using by running: 3246 # 3247 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION" 3248 # 3249 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce") 3250 # 3251 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm") 3252 # 3253 # For Apple_Terminal v71+/v100+, use "nsterm-bce". 3254 # 3255 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s". 3256 # 3257 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s". 3258 # 3259 # For all earlier versions (Apple_Terminal), try "nsterm-7-m" 3260 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s" 3261 # might work too, but really you're on your own here since these 3262 # systems are very obsolete and I can't test them. I do welcome 3263 # patches, though :). 3264 3265 # Other Terminals: 3266 # 3267 # For GNUstep_Terminal, you're probably best off using "linux" or 3268 # writing your own terminfo. 3269 3270 # For MacTelnet, you're on your own. It's a different codebase, and 3271 # seems to be somewhere between "vt102", "ncsa" and "xterm-color". 3272 3273 # For iTerm.app, see "iterm". 3274 3275 # 3276 # The AppKit Terminal.app descriptions all have names beginning with 3277 # "nsterm". Note that the statusline (-s) versions use the window 3278 # titlebar as a phony status line, and may produce warnings during 3279 # compilation as a result ("tsl uses 0 parameters, expected 1".) 3280 # Ignore these warnings, or even ignore these entries entirely. Apps 3281 # which need to position the cursor or do other fancy stuff inside the 3282 # status line won't work with these entries. They're primarily useful 3283 # for programs like Pine which provide simple notifications in the 3284 # status line. Please note that non-ASCII characters don't work right 3285 # in the status line, since Terminal.app incorrectly interprets their 3286 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X 3287 # versions) or only accepts status lines consisting entirely of 3288 # characters from the first 256 Unicode positions (including C1 but 3289 # not C0 or DEL.) 3290 # 3291 # The Mythology* of AppKit Terminal.app: 3292 # 3293 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible 3294 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a 3295 # shareware replacement for Terminal called "Stuart" which NeXT bought 3296 # and used as the basis for the Terminal.app in NeXTSTEP 2+, 3297 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I 3298 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or 3299 # capabilities for the early versions, but I believe that the 3300 # TERM_PROGRAM_VERSION may have been reset at some point. 3301 # 3302 # The early versions were tailored to the NeXT character set. Sometime 3303 # after the Apple acquisition the encoding was switched to MacRoman 3304 # (initially with serious altcharset bugs due to incomplete conversion 3305 # of the old NeXT code,) and then later to UTF-8. Also sometime during 3306 # or just prior to the early days of Mac OS X, the Terminal grew ANSI 3307 # 8-color support (initially buggy when combined with attributes, but 3308 # that was later fixed.) More recently, around Mac OS X version 10.3 3309 # or so (Terminal.app v100+) xterm-like 16-color support was added. In 3310 # some versions (for instance 133-1 which shipped with Mac OS X 3311 # version 10.4) this suffered from the <bce> bug, but that seems to 3312 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+). 3313 # 3314 # In the early days of Mac OS X the terminal was fairly buggy and 3315 # would routinely crash under load. Many of these bugs seem to have 3316 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but 3317 # some may still remain. This change seems to correspond to 3318 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as 3319 # it did previously. 3320 # 3321 # * This may correspond with what actually happened, but I don't 3322 # know. It is based on guesswork, hearsay, private correspondence, 3323 # my faulty memory, and the following online sources and references: 3324 # 3325 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel 3326 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html 3327 # 3328 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia 3329 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep 3330 # 3331 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to 3332 # "nsterm" to comply with the name length and case conventions and 3333 # limitations of various software packages [notably Solaris terminfo 3334 # and UNIX.] A single Apple_Terminal alias is retained for 3335 # backwards-compatibility. 3336 # 3337 # * Added function key support (F1-F4). These only work in Terminal.app 3338 # version 51, hopefully the capabilities won't cause problems for people 3339 # using version 41. 3340 # 3341 # * Added "full color" (-c) entries which support the 16-color mode in 3342 # version 51. 3343 # 3344 # * By default, version 51 uses UTF-8 encoding with broken altcharset 3345 # support, so "ASCII" (-7) entries without altcharset support were 3346 # added. 3347 3348 # nsterm - AppKit Terminal.app 3349 # 3350 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT 3351 # Terminal.app. It is a partial VT100 emulation with some xterm-like 3352 # extensions. This terminfo was written to describe versions 41 3353 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X 3354 # version 10.1) of Terminal.app. 3355 # 3356 # Terminal.app runs under the Mac OS X Quartz windowing system (and 3357 # other AppKit-supported windowing systems.) On the Mac OS X machine I 3358 # use, the executable for Terminal.app is: 3359 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal 3360 # 3361 # If you're looking for a description of the full-screen system 3362 # console which runs under Apple's Darwin operating system on PowerPC 3363 # platforms, see the "xnuppc" entry instead. 3364 # 3365 # There were no function keys in version 41. In version 51, there are 3366 # four working function keys (F1, F2, F3 and F4.) The function keys 3367 # are included in all of these entries. 3368 # 3369 # It does not support mouse pointer position reporting. Under some 3370 # circumstances the cursor can be positioned using option-click; this 3371 # works by comparing the cursor position and the selected position, 3372 # and simulating enough cursor-key presses to move the cursor to the 3373 # selected position. This technique fails in all but the simplest 3374 # applications. 3375 # 3376 # It provides partial ANSI color support (background colors interacted 3377 # badly with bold in version 41, though, as reflected in :ncv:.) The 3378 # monochrome (-m) entries are useful if you've disabled color support 3379 # or use a monochrome monitor. The full color (-c) entries are useful 3380 # in version 51, which doesn't exhibit the background color bug. They 3381 # also enable an xterm-compatible 16-color mode. 3382 # 3383 # The configurable titlebar is set using xterm-compatible sequences; 3384 # it is used as a status bar in the statusline (-s) entries. Its width 3385 # depends on font sizes and window sizes, but 50 characters seems to 3386 # be the default for an 80x24 window. 3387 # 3388 # The MacRoman character encoding is used for some of the alternate 3389 # characters in the "MacRoman" entries; the "ASCII" (-7) entries 3390 # disable alternate character set support entirely, and the "VT100" 3391 # (-acs) entries rely instead on Terminal.app's own buggy VT100 3392 # graphics emulation, which seems to think the character encoding is 3393 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries 3394 # are useful in Terminal.app version 51, which supports UTF-8 and 3395 # other ASCII-compatible character encodings but does not correctly 3396 # implement VT100 graphics; once VT100 graphics are correctly 3397 # implemented in Terminal.app, the "VT100" (-acs) entries should be 3398 # usable in any ASCII-compatible character encoding [except perhaps 3399 # in UTF-8, where some experts argue for disallowing alternate 3400 # characters entirely.] 3401 # 3402 # Terminal.app reports "vt100" as the terminal type, but exports 3403 # several environment variables which may aid detection in a shell 3404 # profile (i.e. .profile or .login): 3405 # 3406 # TERM=vt100 3407 # TERM_PROGRAM=Apple_Terminal 3408 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41 3409 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51 3410 # 3411 # For example, the following Bourne shell script would detect the 3412 # correct terminal type: 3413 # 3414 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ] 3415 # then 3416 # export TERM 3417 # if [ :"$TERM_PROGRAM_VERSION" = :41 ] 3418 # then 3419 # TERM="nsterm-old" 3420 # else 3421 # TERM="nsterm-c-7" 3422 # fi 3423 # fi 3424 # 3425 # In a C shell derivative, this would be accomplished by: 3426 # 3427 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then 3428 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then 3429 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then 3430 # setenv TERM "nsterm-old" 3431 # else 3432 # setenv TERM "nsterm-c-7" 3433 # endif 3434 # endif 3435 # endif 3436 3437 # The '+' entries are building blocks 3438 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset, 3439 am, bw, msgr, xenl, xon, 3440 cols#80, it#8, lines#24, 3441 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 3442 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3443 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 3444 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3445 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 3446 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, 3447 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB, 3448 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, 3449 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3450 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 3451 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 3452 %p5%t;2%;%?%p7%t;8%;m, 3453 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 3454 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys, 3455 3456 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset, 3457 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3458 enacs=\E(B\E)0, rmacs=^O, 3459 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 3460 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3461 sgr0=\E[m\017, smacs=^N, use=nsterm+7, 3462 3463 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset, 3464 acsc=+\335\,\334-\366.\3770#`\327a:f\241g\261h#i 3465 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{ 3466 \271|\255}\243~\245, 3467 enacs=\E(B\E)0, rmacs=^O, 3468 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 3469 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3470 sgr0=\E[m\017, smacs=^N, use=nsterm+7, 3471 3472 # compare with xterm+sl-twm 3473 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support, 3474 wsl#50, use=xterm+sl-twm, 3475 3476 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors), 3477 op=\E[0m, use=ibm+16color, 3478 3479 nsterm+c41|AppKit Terminal.app v41 color support, 3480 colors#8, ncv#37, pairs#64, 3481 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3482 3483 # These are different combinations of the building blocks 3484 3485 # ASCII charset (-7) 3486 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome), 3487 use=nsterm+7, 3488 3489 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline), 3490 use=nsterm+s, use=nsterm+7, 3491 3492 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color), 3493 use=nsterm+c41, use=nsterm+7, 3494 3495 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color), 3496 use=nsterm+c, use=nsterm+7, 3497 3498 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline), 3499 use=nsterm+s, use=nsterm+c41, use=nsterm+7, 3500 3501 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline), 3502 use=nsterm+s, use=nsterm+c, use=nsterm+7, 3503 3504 # VT100 alternate-charset (-acs) 3505 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome), 3506 use=nsterm+acs, 3507 3508 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline), 3509 use=nsterm+s, use=nsterm+acs, 3510 3511 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color), 3512 use=nsterm+c41, use=nsterm+acs, 3513 3514 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color), 3515 use=nsterm+c, use=nsterm+acs, 3516 3517 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline), 3518 use=nsterm+s, use=nsterm+c41, use=nsterm+acs, 3519 3520 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline), 3521 use=nsterm+s, use=nsterm+c, use=nsterm+acs, 3522 3523 # MacRoman charset 3524 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome), 3525 use=nsterm+mac, 3526 3527 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline), 3528 use=nsterm+s, use=nsterm+mac, 3529 3530 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color), 3531 use=nsterm+c41, use=nsterm+mac, 3532 3533 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color), 3534 use=nsterm+c, use=nsterm+mac, 3535 3536 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline), 3537 use=nsterm+s, use=nsterm+c41, use=nsterm+mac, 3538 3539 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline), 3540 use=nsterm+s, use=nsterm+c, use=nsterm+mac, 3541 3542 # In Mac OS X version 10.5 the format of the preferences has changed 3543 # and a new, more complex technique is needed, e.g., 3544 # 3545 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass( 3546 # "NSUserDefaults");ud=NSUserDefaults.alloc(); 3547 # ud.init();prefs=ud.persistentDomainForName_( 3548 # "com.apple.Terminal");prefs["Window Settings"][ 3549 # prefs["Default Window Settings"]]["TerminalType" 3550 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs, 3551 # "com.apple.Terminal")' nsterm-16color 3552 # 3553 # and it is still not settable from the preferences dialog. This is 3554 # tracked under rdar://problem/7365108 and rdar://problem/7365134 3555 # in Apple's bug reporter. 3556 # 3557 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog 3558 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt, 3559 # vt52, vt100, vt102 and xterm. 3560 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5, 3561 bw@, mir, npc, 3562 dch=\E[%p1%dP, dch1=\E[P, flash=\E[?5h$<200/>\E[?5l, 3563 hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, 3564 kend=\E[F, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3565 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 3566 kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, 3567 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3568 khome=\E[H, knp=\E[6~, kpp=\E[5~, rmir=\E[4l, smir=\E[4h, 3569 vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C, 3570 use=xterm+alt47, use=nsterm-c-s-acs, use=vt220+cvis, 3571 3572 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have 3573 # the background color erase feature. The newer version 240.2 in Mac OS X 3574 # version 10.5 does not. 3575 # 3576 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert, 3577 # and D P Schreber comparing to nsterm-c-s-acs. 3578 # 3579 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM 3580 # can be set in Terminal.app, e.g., 3581 # 3582 # defaults write com.apple.Terminal TermCapString nsterm-bce 3583 # 3584 # and that it is not set in Terminal's preferences dialog. 3585 # 3586 # Modified for OS X 10.8, omitting bw based on testing with tack -TD 3587 # 3588 # Notes: 3589 # * The terminal description matches the default settings. 3590 # * The keyboard is configurable via a dialog. 3591 # * By default khome, kend, knext and kprev are honored only with a 3592 # shift-modifier. 3593 # * There are bindings for control left/right arrow (but not up/down). 3594 # Added those to nsterm-16color, which is the version used for OS X 10.6 3595 # * "Allow VT100 application keypage mode" is by default disabled. 3596 # There is no way to press keypad-comma unless application mode is enabled 3597 # and used. 3598 # * 132-column mode stopped working during vttest's tests. Consider it broken. 3599 # * CHT, REP, SU, SD are buggy. 3600 # * ECH works (also in Leopard), but is not used here for compatibility. 3601 # * The terminal preferences dialog replaces xterm-color by xterm-16color and 3602 # xterm-256color. However, it adds "nsterm", so it is possible to use the 3603 # nsterm entry from this file to override the MacPorts (20110404) or 3604 # system (20081102) copy of this file. 3605 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences 3606 # dialog defaults to xterm-256color. Alternative selections are ansi, 3607 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However, 3608 # the menu says "Declare terminal as" without promising to actually emulate 3609 # the corresponding terminals. Indeed, changing TERM does not affect the 3610 # emulation itself. This means that 3611 # + the function-keys do not match for dtterm for kf1-kf4 as well as 3612 # khome/kend 3613 # + the color model is the same for each setting of TERM (does not match 3614 # ansi or dtterm). 3615 # + the shift/control/meta key modifiers from rxvt and xterm variants are not 3616 # recognised except for a few special cases, i.e., kRIT5 and kLFT5. 3617 # + the VT52 emulation does not give a usable shell because screen-clearing 3618 # does not work as expected. 3619 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color". 3620 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration 3621 # as well as unmasking F10 (which had been used in the window manager). Those 3622 # keys are listed in this entry. 3623 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce), 3624 bce, use=nsterm-16color, 3625 3626 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11 3627 # TERM_PROGRAM_VERSION=309 3628 # Earlier reports state that these differences also apply to OS X 10.7 (Lion), 3629 # TERM_PROGRAM_VERSION=303 3630 nsterm-build309|Terminal.app in OS X 10.8, 3631 use=xterm+256setaf, use=nsterm-bce, 3632 3633 # removed bogus kDC7 -TD 3634 nsterm-build326|Terminal.app in OS X 10.9, 3635 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z, 3636 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D, 3637 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309, 3638 3639 # actually "343.7" 3640 nsterm-build343|Terminal.app in OS X 10.10, 3641 kend=\EOF, khome=\EOH, use=nsterm-build326, 3642 3643 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD 3644 # Using vttest: 3645 # + no VT52 mode for cursor keys, though VT52 screen works in vttest 3646 # + f1-f4 map to pf1-pf4 3647 # + no VT220 support aside from DECTCEM and ECH 3648 # + there are no protected areas. Forget about anything above VT220. 3649 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work. 3650 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce 3651 # + but bce fails for 11.6.7.2 (test repeat). 3652 # + SD (11.6.7.3) also fails, but SL/SR/SU work. 3653 # + 11.6.6 (test insert/delete char/line with bce) has several failures. 3654 # + normal (not X10 or Highlight tracking) mouse now works. 3655 # + mouse any-event works 3656 # + mouse button-event works 3657 # + in alternate screen: 3658 # mode 47/48 work 3659 # mode 1047 fails to restore cursor position (do not use) 3660 # mode 1049 fails to restore screen contents (do not use) 3661 # + dtterm window-modify operations work (some messages are not printed) 3662 # + dtterm window-report gives size of window in characters/pixels as 3663 # well as state of window. 3664 # Using tack: 3665 # + there is no difference between cnorm/cvvis 3666 # + has dim/invis/blink (no protect of course) 3667 # + most function keys with shift/control modifiers give beep 3668 # (user can configure, but out-of-the-box is what I record) 3669 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between 3670 # F8 and F9). 3671 # + kLFT5/kRIT5 work, but not up/down with control-modifier 3672 # + kLFT/kRIT work, but not up/down with shift-modifier 3673 # + there are a few predefined bindings with Alt, but no clear pattern. 3674 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape 3675 # Using ncurses test-program with xterm-new: 3676 # + no italics 3677 # Using xterm's scripts: 3678 # + palette for 256-colors is hardcoded. 3679 # + no support for "dynamic colors" 3680 # + no support for tcap-query. 3681 nsterm-build361|Terminal.app in OS X 10.11, 3682 XT, 3683 kmous=\E[M, use=nsterm-build343, 3684 3685 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD 3686 # Comparing with build361, little has changed, except that italics work. 3687 # Direct-color is not supported, by the way. 3688 # 3689 # Improved rmso/rmul -TD 3690 nsterm-build400|Terminal.app in OS X 10.13, 3691 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006, 3692 use=ecma+italics, use=nsterm-build361, 3693 3694 nsterm-build440|Terminal.app in MacOS 11.6.8, 3695 use=xterm+alt1049, use=nsterm-build400, 3696 3697 # This is an alias which should always point to the "current" version 3698 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app, 3699 use=nsterm-build440, 3700 3701 #### iTerm, iTerm2 3702 3703 # iTerm 0.10 3704 # 3705 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more 3706 # featureful) terminal emulator for Mac OS X. It is similar enough in 3707 # capabilities to nsterm-16color that I have derived this description from that 3708 # one, but as far as I know they share no code. Many of the features are 3709 # user-configurable, but I attempt only to describe the default configuration 3710 # (B. Sittler). 3711 # 3712 # According to its documentation, iTerm uses terminfo to obtain function key 3713 # definitions. For example, if it is started with TERM=xterm, it uses key 3714 # definitions from that terminal description from the local OSX machine. Those 3715 # $TERM settings may be augmented using the bookmark and profile dialogs. 3716 # However, the behavior seen with tack does not agree with either the terminfo 3717 # description or the function keys in its "xterm" profile. 3718 # 3719 # NOTES: 3720 # with vttest: 3721 # reports primary DA as VT100 with AVO: \E[?1;2c 3722 # reports secondary DA as "\E[>0;95;c" 3723 # supports blink and underline 3724 # displays bold text as red 3725 # recognizes all dtterm controls for modifying/querying window 3726 # resizing via escape sequence is very slow 3727 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking) 3728 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048) 3729 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA 3730 # with tack: 3731 # . 3732 # with ncurses test-program: 3733 # ncurses 'k' has problem in second screen; light background does not fill 3734 # with xterm scripts 3735 # can display/alter xterm-256color cube 3736 # can display/alter xterm-88color cube 3737 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X, 3738 am, bce, mir, msgr, npc, xenl, xon, 3739 cols#80, it#8, lines#24, wsl#50, 3740 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3741 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 3742 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3743 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 3744 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3745 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3746 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 3747 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3748 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 3749 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?, 3750 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3751 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~, 3752 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 3753 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3754 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8, 3755 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 3756 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3757 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 3758 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? 3759 %p9%t\016%e\017%;, 3760 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 3761 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3762 vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H, 3763 use=xterm+alt47, use=ansi+enq, use=xterm+sl-twm, 3764 use=vt100+keypad, use=xterm+x11mouse, 3765 use=xterm+256setaf, use=vt220+cvis, 3766 3767 # iTerm2 3.0.15 3768 # 3769 # https://iterm2.com/ 3770 # https://github.com/gnachman/iTerm2 3771 # ~/Library/Preferences/com.googlecode.iterm2.plist 3772 # "iTerm" stalled in 2009. A different set of developers began "iTerm2". 3773 # 3774 # NOTES: 3775 # with vttest: 3776 # reports primary DA as VT100 with AVO: \E[?1;2c 3777 # reports secondary DA as "\E[>0;95;0c" 3778 # numeric keypad application mode does not work 3779 # by default, dtterm window-modifications are ignored 3780 # by default, dtterm window-reports return, but icon as "L", window as "l" 3781 # supports SD/SU, no REP, SL, SR 3782 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR) 3783 # no improvement to XFree86 1047/1048 modes 3784 # with tack: 3785 # in meta-mode, imitates xterm, sending UTF-8 3786 # special-key modifiers based on xterm use incompatible default for alt/meta 3787 # with ncurses test-program: 3788 # no italics 3789 # no improvement to ncurses 'k' 3790 # with xterm scripts: 3791 # acolors.sh works 3792 # 3793 # Italic text did not work initially, apparently because upgrading did not 3794 # add/change that preference (set in Preferences, Profiles, Text). A new 3795 # install of iTerm 3.0.15 provides italics by default (blinking text is an 3796 # option in the preferences dialog). 3797 # 3798 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5 3799 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD 3800 iTerm2.app|iterm2|terminal emulator for Mac OS X, 3801 cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@, 3802 kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P, kf14=\E[1;2Q, 3803 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~, 3804 kf19=\E[18;2~, kf20=\E[19;2~, kf21=\E[20;2~, 3805 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, 3806 kind=\E[1;2B, kri=\E[1;2A, nel=\EE, op=\E[39;49m, 3807 rmso=\E[27m, rmul=\E[24m, 3808 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l, 3809 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 3810 %p5%t;2%;m%?%p9%t\016%e\017%;, 3811 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B, 3812 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F, 3813 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H, 3814 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H, 3815 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D, 3816 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~, 3817 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C, 3818 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A, 3819 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index, 3820 use=xterm+alt+title, use=ecma+italics, use=iterm, 3821 use=bracketed+paste, 3822 3823 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin") 3824 # 3825 # On PowerPC platforms, Apple's Darwin operating system uses a 3826 # full-screen system console derived from a NetBSD framebuffer 3827 # console. It is an ANSI-style terminal, and is not really VT-100 3828 # compatible. 3829 # 3830 # Under Mac OS X, this is the system console driver used while in 3831 # single-user mode [reachable by holding down Command-S during the 3832 # boot process] and when logged in using console mode [reachable by 3833 # typing ">console" at the graphical login prompt.] 3834 # 3835 # If you're looking for a description of the Terminal.app terminal 3836 # emulator which runs under the Mac OS X Quartz windowing system (and 3837 # other AppKit-supported windowing systems,) see the "nsterm" 3838 # entry instead. 3839 # 3840 # NOTE: Under Mac OS X version 10.1, the default login window does not 3841 # prompt for user name, instead requiring an icon to be selected from 3842 # a list of known users. Since the special ">console" login is not in 3843 # this list, you must make one of two changes in the Login Window 3844 # panel of the Login section of System Prefs to make the special 3845 # ">console" login accessible. The first option is to enable 'Show 3846 # "Other User" in list for network users', which will add a special 3847 # "Other..." icon to the graphical login panel. Selecting "Other..." 3848 # will present the regular graphical login prompt. The second option 3849 # is to change the 'Display Login Window as:' setting to 'Name and 3850 # password entry fields', which replaces the login panel with a 3851 # graphical login prompt. 3852 # 3853 # There are no function keys, at least not in Darwin 1.3. 3854 # 3855 # It has no mouse support. 3856 # 3857 # It has full ANSI color support, and color combines correctly with 3858 # all three supported attributes: bold, inverse-video and underline. 3859 # However, bold colored text is almost unreadable (bolding is 3860 # accomplished using shifting and or-ing, and looks smeared) so bold 3861 # has been excluded from the list of color-compatible attributes 3862 # [using (ncv)]. The monochrome entry (-m) is useful if you use a 3863 # monochrome monitor. 3864 # 3865 # There is one serious bug with this terminal emulation's color 3866 # support: repositioning the cursor onto a cell with non-matching 3867 # colors obliterates that cell's contents, replacing it with a blank 3868 # and displaying a colored cursor in the "current" colors. There is 3869 # no complete workaround at present [other than using the monochrome 3870 # (-m) entries,] but removing the (msgr) capability seemed to help. 3871 # 3872 # The "standout" chosen was simple reverse-video, although a colorful 3873 # standout might be more aesthetically pleasing. Similarly, the bold 3874 # chosen is the terminal's own smeared bold, although a simple 3875 # color-change might be more readable. The color-bold (-b) entries 3876 # uses magenta colored text for bolding instead. The fancy color (-f 3877 # and -f2) entries use color for bold, standout and underlined text 3878 # (underlined text is still underlined, though.) 3879 # 3880 # Apparently the terminal emulator does support a VT-100-style 3881 # alternate character set, but all the alternate character set 3882 # positions have been left blank in the font. For this reason, no 3883 # alternate character set capabilities have been included in this 3884 # description. The console driver appears to be ASCII-only, so (enacs) 3885 # has been excluded [although the VT-100 sequence does work.] 3886 # 3887 # The default Mac OS X and Darwin installation reports "vt100" as the 3888 # terminal type, and exports no helpful environment variables. To fix 3889 # this, change the "console" entry in /etc/ttys from "vt100" to 3890 # "xnuppc-WxH", where W and H are the character dimensions of your 3891 # console (see below.) 3892 # 3893 # The font used by the terminal emulator is apparently one originally 3894 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This 3895 # file includes descriptions for the following geometries: 3896 # 3897 # Pixels Characters Entry Name (append -m for monochrome) 3898 # ------------------------------------------------------------------- 3899 # 640x400 80x25 xnuppc-80x25 3900 # 640x480 80x30 xnuppc-80x30 3901 # 720x480 90x30 xnuppc-90x30 3902 # 800x600 100x37 xnuppc-100x37 3903 # 896x600 112x37 xnuppc-112x37 3904 # 1024x640 128x40 xnuppc-128x40 3905 # 1024x768 128x48 xnuppc-128x48 3906 # 1152x768 144x48 xnuppc-144x48 3907 # 1280x1024 160x64 xnuppc-160x64 3908 # 1600x1024 200x64 xnuppc-200x64 3909 # 1600x1200 200x75 xnuppc-200x75 3910 # 2048x1536 256x96 xnuppc-256x96 3911 # 3912 # The basic "xnuppc" entry includes no size information, and the 3913 # emulator includes no reporting capability, so you'll be at the mercy 3914 # of the TTY device (which reports incorrectly on my hardware.) The 3915 # color-bold entries do not include size information. 3916 3917 # The '+' entries are building blocks 3918 xnuppc+basic|Darwin PowerPC console basic capabilities, 3919 am, bce, mir, xenl, NQ, 3920 it#8, 3921 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, 3922 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 3923 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3924 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K, 3925 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?, 3926 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 3927 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, 3928 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 3929 sc=\E7, 3930 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 3931 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 3932 smul=\E[4m, tbc=\E[3g, use=vt100+keypad, 3933 3934 xnuppc+c|Darwin PowerPC console ANSI color support, 3935 colors#8, ncv#32, pairs#64, 3936 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3937 3938 xnuppc+b|Darwin PowerPC console color-bold support, 3939 ncv#32, 3940 bold=\E[35m, 3941 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 3942 use=xnuppc+basic, 3943 3944 xnuppc+f|Darwin PowerPC console fancy color support, 3945 ncv#35, 3946 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%; 3947 m, 3948 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b, 3949 3950 xnuppc+f2|Darwin PowerPC console alternate fancy color support, 3951 ncv#35, 3952 bold=\E[33m, 3953 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m, 3954 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic, 3955 3956 # Building blocks for specific screen sizes 3957 xnuppc+80x25|Darwin PowerPC console 80x25 support (640x400 pixels), 3958 cols#80, lines#25, 3959 3960 xnuppc+80x30|Darwin PowerPC console 80x30 support (640x480 pixels), 3961 cols#80, lines#30, 3962 3963 xnuppc+90x30|Darwin PowerPC console 90x30 support (720x480 pixels), 3964 cols#90, lines#30, 3965 3966 xnuppc+100x37|Darwin PowerPC console 100x37 support (800x600 pixels), 3967 cols#100, lines#37, 3968 3969 xnuppc+112x37|Darwin PowerPC console 112x37 support (896x600 pixels), 3970 cols#112, lines#37, 3971 3972 xnuppc+128x40|Darwin PowerPC console 128x40 support (1024x640 pixels), 3973 cols#128, lines#40, 3974 3975 xnuppc+128x48|Darwin PowerPC console 128x48 support (1024x768 pixels), 3976 cols#128, lines#48, 3977 3978 xnuppc+144x48|Darwin PowerPC console 144x48 support (1152x768 pixels), 3979 cols#144, lines#48, 3980 3981 xnuppc+160x64|Darwin PowerPC console 160x64 support (1280x1024 pixels), 3982 cols#160, lines#64, 3983 3984 xnuppc+200x64|Darwin PowerPC console 200x64 support (1600x1024 pixels), 3985 cols#200, lines#64, 3986 3987 xnuppc+200x75|Darwin PowerPC console 200x75 support (1600x1200 pixels), 3988 cols#200, lines#75, 3989 3990 xnuppc+256x96|Darwin PowerPC console 256x96 support (2048x1536 pixels), 3991 cols#0x100, lines#96, 3992 3993 # These are different combinations of the building blocks 3994 3995 xnuppc-m|darwin-m|Darwin PowerPC console (monochrome), 3996 use=xnuppc+basic, 3997 3998 xnuppc|darwin|Darwin PowerPC console (color), 3999 use=xnuppc+c, use=xnuppc+basic, 4000 4001 xnuppc-m-b|darwin-m-b|Darwin PowerPC console (monochrome w/color-bold), 4002 use=xnuppc+b, 4003 4004 xnuppc-b|darwin-b|Darwin PowerPC console (color w/color-bold), 4005 use=xnuppc+b, use=xnuppc+c, 4006 4007 xnuppc-m-f|darwin-m-f|Darwin PowerPC console (fancy monochrome), 4008 use=xnuppc+f, 4009 4010 xnuppc-f|darwin-f|Darwin PowerPC console (fancy color), 4011 use=xnuppc+f, use=xnuppc+c, 4012 4013 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC console (alternate fancy monochrome), 4014 use=xnuppc+f2, 4015 4016 xnuppc-f2|darwin-f2|Darwin PowerPC console (alternate fancy color), 4017 use=xnuppc+f2, use=xnuppc+c, 4018 4019 # Combinations for specific screen sizes 4020 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC console (monochrome) 80x25, 4021 use=xnuppc+80x25, use=xnuppc+basic, 4022 4023 xnuppc-80x25|darwin-80x25|Darwin PowerPC console (color) 80x25, 4024 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic, 4025 4026 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC console (monochrome) 80x30, 4027 use=xnuppc+80x30, use=xnuppc+basic, 4028 4029 xnuppc-80x30|darwin-80x30|Darwin PowerPC console (color) 80x30, 4030 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic, 4031 4032 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC console (monochrome) 90x30, 4033 use=xnuppc+90x30, use=xnuppc+basic, 4034 4035 xnuppc-90x30|darwin-90x30|Darwin PowerPC console (color) 90x30, 4036 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic, 4037 4038 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC console (monochrome) 100x37, 4039 use=xnuppc+100x37, use=xnuppc+basic, 4040 4041 xnuppc-100x37|darwin-100x37|Darwin PowerPC console (color) 100x37, 4042 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic, 4043 4044 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC console (monochrome) 112x37, 4045 use=xnuppc+112x37, use=xnuppc+basic, 4046 4047 xnuppc-112x37|darwin-112x37|Darwin PowerPC console (color) 112x37, 4048 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic, 4049 4050 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC console (monochrome) 128x40, 4051 use=xnuppc+128x40, use=xnuppc+basic, 4052 4053 xnuppc-128x40|darwin-128x40|Darwin PowerPC console (color) 128x40, 4054 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic, 4055 4056 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC console (monochrome) 128x48, 4057 use=xnuppc+128x48, use=xnuppc+basic, 4058 4059 xnuppc-128x48|darwin-128x48|Darwin PowerPC console (color) 128x48, 4060 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic, 4061 4062 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC console (monochrome) 144x48, 4063 use=xnuppc+144x48, use=xnuppc+basic, 4064 4065 xnuppc-144x48|darwin-144x48|Darwin PowerPC console (color) 144x48, 4066 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic, 4067 4068 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC console (monochrome) 160x64, 4069 use=xnuppc+160x64, use=xnuppc+basic, 4070 4071 xnuppc-160x64|darwin-160x64|Darwin PowerPC console (color) 160x64, 4072 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic, 4073 4074 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC console (monochrome) 200x64, 4075 use=xnuppc+200x64, use=xnuppc+basic, 4076 4077 xnuppc-200x64|darwin-200x64|Darwin PowerPC console (color) 200x64, 4078 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic, 4079 4080 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC console (monochrome) 200x75, 4081 use=xnuppc+200x75, use=xnuppc+basic, 4082 4083 xnuppc-200x75|darwin-200x75|Darwin PowerPC console (color) 200x75, 4084 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic, 4085 4086 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC console (monochrome) 256x96, 4087 use=xnuppc+256x96, use=xnuppc+basic, 4088 4089 xnuppc-256x96|darwin-256x96|Darwin PowerPC console (color) 256x96, 4090 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic, 4091 4092 ######## DOS/WINDOWS 4093 # CRT is shareware. It implements some xterm features, including mouse. 4094 crt|crt-vt220|CRT 2.3 emulating VT220, 4095 bce, 4096 ncv@, use=vt100+enq, use=vt220-base, use=ecma+color, 4097 4098 # SecureCRT 8.7.3.2279 4099 # 8.7.3 was released 2020/08/11 4100 # (eval 2021/02/05) 4101 # VanDyke Software, Inc. 4102 # 4103 # Advertised features: 4104 # Xterm 24-bit color 4105 # Xterm 256-color 4106 # Double-size characters 4107 # Xterm extensions for mouse support and changing title bar 4108 # Emulates VT100, VT102, VT220, VT320, Linux console, SCO ANSI, 4109 # TN3270, TVI910, TVI925, Wyse 50/60, and ANSI. 4110 # Changes: 4111 # Added ANSI sc/rc and REP in 2019/12/17 4112 # Added TVI910/ TVI925 in 2019/11/20 4113 # 4114 # Default: 4115 # Emulate "Xterm", using "ANSI with 256color" 4116 # TERM=xterm-256color 4117 # 4118 # vttest: 4119 # DA1 \E[?62;1;2;6;7;8;9c (vt220 with DRCS and NRCS) 4120 # DA2 \E[>1;136;0c 4121 # double-sized characters do not work 4122 # Menu-1 fails (window resizes to 132-columns, but does not repaint) 4123 # NRCS fails (tried French, but none of the replacements worked) 4124 # VT100 line-drawing works, except the C/R, etc., are an hline. 4125 # VT52 works except for S8C1T bug. 4126 # RIS hangs the terminal. 4127 # Local SRM does not echo. 4128 # Some of the VT320/VT220 status reports work, not locator or DECXCPR 4129 # DECUDK works if I press shift. 4130 # Fails CHT, CNL, CPL 4131 # Does not honor bce with ECH 4132 # ERM/SPA does not work 4133 # REP has 11 +'s except for final 2 +'s, like PuTTY. 4134 # Fails SL/SR 4135 # DECRPM does not respond. 4136 # dtterm modify/report operations do not work 4137 # Alternate screen works. 4138 # Mouse: 4139 # highlight tracking does not work. 4140 # any event tracking does not work, but 4141 # button event tracking does work. 4142 # DEC locator does not work. 4143 # SGR coordinates does not work. 4144 # ncurses: 4145 # reset6 does reset to 80-columns 4146 # ncurses RGB edit does not work. 4147 # direct colors don't work, probably needs semicolons. 4148 # tack: 4149 # blink works, but not dim or invis 4150 # no italics or crossed-out 4151 # scripts: 4152 # 256color handles "-r" option (but test/ncurses menu d does not alter) 4153 # dynamic colors queries do not work, though it seems some can be set. 4154 # resize.pl gets no reply, resize.sh needs fix for no reply. 4155 scrt|securecrt|SecureCRT emulating xterm-256color, 4156 bce@, km@, npc, 4157 bel@, cvvis@, kcbt=\E[Z, use=vt220+pcedit, 4158 use=xterm+256setaf, use=ecma+index, use=ansi+rep, 4159 use=xterm+keypad, use=xterm+pcfkeys, use=xterm-basic, 4160 4161 # Absolute Telnet 4162 # (eval 2021/02/20) 4163 # 11.24 was released 2020/08/13 4164 # Celestial Software 4165 # 4166 # Advertised features: 4167 # Emacs compatibility mode (Meta Keys can be enabled for left/right ALT) 4168 # Double-size characters 4169 # Xterm extensions for mouse support 4170 # Emulates VT52, VT100, VT220, VT320, ansi, xterm, qnx, scoansi, 4171 # ANSIBBS, WYSE60, TeleVideo 950. 4172 # 4173 # Default: 4174 # TERM=xterm 4175 # 4176 # vttest: 4177 # DA1: \E[?62;1;2;6;7;8;9;15;22c (VT200 with DRCS, UDK, NRCS) 4178 # DA2: \E[>1;10;0c 4179 # However: 4180 # + NRCS tests do not work 4181 # + DECUDK test fails 4182 # + VT100 double-sized characters work 4183 # menu-1 autowrap does not work 4184 # supports blinking text 4185 # VT220 DECSCA last screen (ignoring ECH, etc), leaves fill on top/left 4186 # VT220 device status reports fail, except operating status 4187 # 8-bit controls work 4188 # xterm alternate screen recognized, but cursor restored incorrectly 4189 # xterm mouse (normal, any event, button event) works 4190 # xterm highlight-mouse does not work properly, confused with any-event 4191 # does not recognize SGR-mouse mode 4192 # supports xterm window-modifiny/reporting controls 4193 # supports ECMA-48 cursor movement except HPR 4194 # supports REP and SD, but not ECMA-48 SL, SR, SU 4195 # tack: 4196 # italics and crossed-out do not work 4197 # supports xterm-style modified function-keys, using X11R6 F1-F4. 4198 # does not support modified cursor-keys or editing-keys 4199 # uses VT220-style Home/End 4200 # if alt-keys are enabled, 4201 # meta-mode sends escape rather than shifting, in 7-bit mode 4202 # meta-mode does the expected shifting in 8-bit mode 4203 # scripts: 4204 # supports 256-colors, including changing palette (ncurses menu d works) 4205 # supports UTF-8, but honors VT100 line-drawing 4206 absolute|Absolute Telnet emulating xterm, 4207 kcbt=\E[Z, use=ecma+index, use=linux+kbs, use=ansi+rep, 4208 use=vt220+pcedit, use=xterm+keypad, use=xterm+app, 4209 use=xterm+pcf0, use=xterm+256color, use=xterm+x11mouse, 4210 use=xterm-basic, 4211 4212 #### PuTTY 4213 # http://www.chiark.greenend.org.uk/~sgtatham/putty/ 4214 # 4215 # PuTTY 0.78 (September 2020, tested 12 August 2023) 4216 # Testing with tack: 4217 # implements cross-out text (shortly after 0.74) 4218 # restore kLFT as kLFT5, etc. (mentioned in October 2021) 4219 # does not support direct-colors (mentioned in July 2021) 4220 # 4221 # PuTTY 0.74 (27 June 2020) 4222 # (unchanged) 4223 # 4224 # PuTTY 0.73 (September 2019) 4225 # Testing with tack: 4226 # does not implement italics 4227 # does not implement cross-out text 4228 # its settings dialog allows some of the VT100 line-drawing tests to pass 4229 # (not the padding test, though) 4230 # Testing with vttest: 4231 # xterm mouse modes are incomplete: X10, highlight, any-event, and focus in/out modes are not implemented. 4232 # does not implement protected areas 4233 # does not implement SL/SR 4234 # 4235 # PuTTY 0.71 (March 2019) provided a workable "rep" capability. It also 4236 # changed longstanding keypad assignments, so that these no longer apply: 4237 # kLFT=\E[D, kRIT=\E[C, kb2=\E[G, 4238 # 4239 # PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was 4240 # in 2017 (0.70) -TD 4241 # 4242 # Comparing with 0.51, vttest is much better (only a few problems with the 4243 # cursor position reports and wrapping). 4244 # 4245 # PuTTY 0.51 (14 December 2000) 4246 # 4247 # This emulates VT100 + VT52 (plus a few VT220 features: ech, SRM, DECTCEM, as 4248 # well as SCO and Atari, color palettes from Linux console). Reading the code, 4249 # it is intended to be VT102 plus selected features. By default, it sets $TERM 4250 # to xterm, which is incorrect, since several features are misimplemented: 4251 # 4252 # Alt+key always sends ESC+key, so 'km' capability is removed. 4253 # 4254 # Control responses, wrapping and tabs are buggy, failing a couple of 4255 # screens in vttest. 4256 # 4257 # xterm mouse support is not implemented (unreleased version may). 4258 # 4259 # Several features such as backspace/delete are optional; this entry documents 4260 # the default behavior. None of the combinations of keyboard settings match 4261 # those used for xterm -TD 4262 # 4263 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen, 4264 # but implements it incorrectly as mentioned here: 4265 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114 4266 putty|PuTTY terminal emulator, 4267 am, bce, bw, ccc, mir, msgr, xenl, xon, XT, 4268 colors#8, it#8, ncv#22, pairs#64, U8#1, 4269 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4270 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 4271 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4272 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 4273 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 4274 dch=\E[%p1%dP, dch1=\E[P, 4275 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G 4276 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e 4277 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G 4278 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@ 4279 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E 4280 %%G\340\202\242\E%%@%e%p1%c%;, 4281 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 4282 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, 4283 home=\E[H, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\n, 4284 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/ 4285 %02x%p4%{255}%*%{1000}%/%02x, 4286 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, 4287 kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 4288 kcuu1=\EOA, kind=\E[B, kri=\E[A, kspd=^Z, nel=\r\n, oc=\E]R, 4289 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4290 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmpch=\E[10m, 4291 rmso=\E[27m, rmul=\E[24m, 4292 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, 4293 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, 4294 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4295 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 4296 %;m%?%p9%t\016%e\017%;, 4297 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 4298 smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 4299 vpa=\E[%i%p1%dd, E3=\E[3J, use=vt220+pcedit, 4300 use=ansi+tabs, use=ansi+rep, use=ecma+index, 4301 use=xterm+alt1049, use=xterm+sm+1006, use=putty+fnkeys, 4302 use=vt102+enq, use=xterm+sl, use=vt100+fnkeys, 4303 use=putty+keypad, use=vt220+cvis, use=bracketed+paste, 4304 use=putty+cursor, use=ecma+strikeout, 4305 # older versions (e.g., before 0.71) of PuTTY used a shift-modifier to toggle 4306 # between normal- and application-mode for the cursor-keys. That was dropped, 4307 # and a few years later (after 0.74) restored as the control-modifier. 4308 putty+cursor|PuTTY modified cursor-keys, 4309 kDN5=\E[B, kLFT5=\E[D, kRIT5=\E[C, kUP5=\E[A, 4310 putty+keypad|PuTTY numeric keypad, 4311 kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv, 4312 kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ, 4313 kpDOT=\EOn, kpMUL=\EOR, kpNUM=\EOP, kpSUB=\EOS, kpZRO=\EOp, 4314 4315 vt100-putty|Reset PuTTY to pure VT100, 4316 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, 4317 use=vt100, 4318 putty-256color|PuTTY 0.58 with xterm 256-colors, 4319 use=xterm+256setaf, use=putty, 4320 putty-noapp|putty with cursor keys in normal mode, 4321 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 4322 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=, 4323 use=putty, 4324 4325 # One of the keyboard selections is "VT100+". 4326 # pterm (the X11 port) uses shifted F1-F10 as F11-F20 4327 putty-vt100|VT100+ keyboard layout, 4328 use=putty+fnkeys+vt100, use=putty, 4329 4330 putty-sco|putty with SCO function keys, 4331 use=putty+fnkeys+sco, use=putty, 4332 4333 # PuTTY has more than one section in its Keyboard configuration: 4334 # a) backspace/delete, which we ignore since that choice largely depends on 4335 # whether one matches Unix and BSD or Linux. 4336 # b) home/end keys, also ignored because the "rxvt" setting sends keys which 4337 # are unrelated to rxvt's actual settings. 4338 # c) function keys and keypad - this is the interesting part. None of the 4339 # selections match any of their respective namesakes, but they are shown 4340 # here to help users who expect that the selections do what is implied. 4341 # 4342 # This is the default setting for PuTTY 4343 putty+fnkeys|fn-keys for PuTTY, 4344 use=putty+fnkeys+esc, 4345 4346 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY, 4347 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 4348 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 4349 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, 4350 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 4351 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4352 4353 putty+fnkeys+linux|Linux fn-keys for PuTTY, 4354 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 4355 use=putty+fnkeys+esc, 4356 4357 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY, 4358 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4359 use=putty+fnkeys+esc, 4360 4361 putty+fnkeys+vt400|VT400 fn-keys for PuTTY, 4362 use=putty+fnkeys+esc, 4363 4364 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct 4365 # key is F20. 4366 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY, 4367 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, 4368 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 4369 kf9=\EOX, use=putty+fnkeys+esc, 4370 4371 # Unlike xterm-sco, this leaves kmous ambiguous with kf1. 4372 # 4373 # Use modifiers to obtain function keys past 12: 4374 # F1-F12 - normal 4375 # F13-F24 - shift 4376 # F25-F36 - control/alt 4377 # F37-F48 - control/shift 4378 # 4379 putty+fnkeys+sco|SCO fn-keys for PuTTY, 4380 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4381 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 4382 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 4383 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 4384 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 4385 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 4386 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 4387 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 4388 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 4389 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 4390 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 4391 kich1=\E[L, knp=\E[G, kpp=\E[I, 4392 4393 #### mintty 4394 # https://github.com/mintty/mintty 4395 # 4396 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in 4397 # 2013 to 41ksloc in 2020. That is still smaller than PuTTY (160ksloc), but 4398 # larger than rxvt (31ksloc) and slightly smaller than rxvt-unicode (42ksloc). 4399 # 4400 # Version 3.0 responds to DA as a VT400, however it does not implement the 4401 # application keypad. The assignment of cursor-keys versus modifiers differs 4402 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control). 4403 # 4404 # Thomas Wolff suggested these extensions: 4405 # blink2 turn on rapid blinking 4406 # blink0 turn off blinking 4407 # norm turn off bold and half-bright mode 4408 # opaq turn off blank mode 4409 # smul2 begin double underline mode 4410 # smol begin overline mode 4411 # rmol exit overline mode 4412 # Font0 use default font 4413 # Font1 use alternative font 1 4414 # ... 4415 # Font10 use alternative font 10 4416 # setal set (under)line color 4417 # ol set default (under)line color 4418 # overs overstrike (print characters over each other) 4419 # 4420 # but see vte-2018 (use Smol/Rmol rather than smol/rmol). 4421 mintty|Cygwin Terminal, 4422 setal=\E[5%p1%dm, use=xterm+256color, 4423 use=mintty+common, 4424 mintty-direct|Cygwin Terminal direct-color, 4425 use=kitty+setal, use=xterm+direct, use=mintty+common, 4426 mintty+common|shared capabilities for mintty, 4427 km@, npc, 4428 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m, 4429 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m, 4430 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1:2m, 4431 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m, 4432 Smulx=\E[4:%p1%dm, blink2=\E[6m, norm=\E[22m, 4433 opaq=\E[28m, smul2=\E[21m, use=linux+kbs, use=ansi+rep, 4434 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm, 4435 use=xterm+focus, use=xterm+sm+1006, use=xterm+pcfkeys, 4436 use=xterm+tmux, use=ecma+italics, use=xterm-basic, 4437 use=bracketed+paste, use=report+version, 4438 # 2019-06-09: These capabilities are commented-out for compatibility with 4439 # existing releases 5.9-6.1, and may be considered for inclusion after the 4440 # release of ncurses 6.2: 4441 # Font0=\E[10m, 4442 # Font1=\E[11m, 4443 # Font2=\E[12m, 4444 # Font3=\E[13m, 4445 # Font4=\E[14m, 4446 # Font5=\E[15m, 4447 # Font6=\E[16m, 4448 # Font7=\E[17m, 4449 # Font8=\E[18m, 4450 # Font9=\E[19m, 4451 # Font10=\E[20m, 4452 # blink0=\E[25m, 4453 # ol=\E[59m, 4454 # overs=\E[8\:7m, 4455 4456 #### TeraTerm 4457 4458 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by 4459 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator 4460 # (communication program) which supports: 4461 # 4462 # - Serial port connections. 4463 # - TCP/IP (telnet) connections. 4464 # - VT100 emulation, and selected VT200/300 emulation. 4465 # - TEK4010 emulation. 4466 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and 4467 # Quick-VAN). 4468 # - Scripts using the "Tera Term Language". 4469 # - Japanese and Russian character sets. 4470 # 4471 # The program does not come with terminfo or termcap entries. However, the 4472 # emulation (testing with vttest and ncurses) is reasonably close to VT100 (no 4473 # VT52 or doublesize character support; blinking is done with color). Besides 4474 # the HPA, VPA extensions it also implements CPL and CNL. 4475 # 4476 # All of the function keys can be remapped. This description shows the default 4477 # mapping, as installed. Both VT100 PF1-PF4 keys and quasi-vt220 F1-F4 keys 4478 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad 4479 # is laid out like VT220, rather than the face codes on the PC keyboard, i.e, 4480 # kfnd Insert 4481 # kslt Delete 4482 # kich1 Home 4483 # kdch1 PageUp 4484 # kpp End 4485 # knp PageDown 4486 # 4487 # ANSI colors are implemented, but cannot be combined with video attributes 4488 # except for reverse. 4489 # 4490 # No fonts are supplied with the program, so the acsc string is chosen to 4491 # correspond with the default Microsoft terminal font. 4492 # 4493 # Tera Term recognizes some xterm sequences, including those for setting and 4494 # retrieving the window title, and for setting the window size (i.e., using 4495 # "resize -s"), though it does not pass SIGWINCH to the application if the 4496 # user resizes the window with the mouse. 4497 teraterm2.3|Tera Term Pro 2.3, 4498 km, 4499 ncv#43, vt@, 4500 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i 4501 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u 4502 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4503 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cuf1=\E[C, 4504 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 4505 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 4506 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, 4507 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, kf1=\E[11~, 4508 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 4509 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 4510 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 4511 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 4512 kf8=\E[19~, kf9=\E[20~, op=\E[100m, rev=\E[7m, ri=\EM, 4513 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, 4514 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt220+vtedit, 4515 use=vt100+enq, use=klone+color, use=vt100, 4516 use=vt220+cvis, 4517 4518 # Version 4.59 has regular VT100 line-drawing (so it is no longer necessary 4519 # to choose a Windows OEM font). 4520 # 4521 # Testing with tack: 4522 # - it does not have xenl (suppress that) 4523 # - underline seems to work with color (modify ncv). 4524 # Testing with vttest: 4525 # - wrapping differs from VT100 (menu 1). 4526 # - it recognizes xterm's X10 and normal mouse tracking, but none of the 4527 # other flavors. 4528 # - it recognizes the dtterm window controls for reporting size in 4529 # characters and pixels. 4530 # - it passes SIGWINCH. 4531 teraterm4.59|Tera Term Pro 4.59, 4532 bce, xenl@, 4533 ncv#41, 4534 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4535 kmous=\E[M, use=teraterm2.3, 4536 4537 # Version 4.97 4538 # 4539 # Testing with tack: 4540 # - no bell (flash works) 4541 # - bold is yellow, blink is red. 4542 # - default keyboard sends ^? for Delete, can be configured for kdch1 4543 # - no meta mode 4544 # Testing with vttest: 4545 # + autowrap has problems... 4546 # + color-tests for bce feature match xterm's behavior 4547 # + handles most of xterm's mouse-controls other than highlight-tracking. 4548 # xterm's SGR 1006 works. 4549 # + partial support for DEC locator-events 4550 # + implements ECMA-48 SD/SU, but not REP, SL/SR. 4551 # + has a "Tek" window, but does not work with vttest's examples 4552 # + supports the dtterm window modify/report controls 4553 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR 4554 # e.g., for VT220 4555 # + VT220 screen-display tests are ok 4556 # + no VT52 support 4557 # Other tests: 4558 # + recognizes xterm's original direct-colors sequences, but result is 4559 # poor. 4560 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control 4561 teraterm4.97|Tera Term Pro 4.97, 4562 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59, 4563 teraterm-256color|TeraTerm with xterm 256-colors, 4564 use=xterm+256setaf, use=teraterm, 4565 4566 teraterm|Tera Term, 4567 use=teraterm4.97, 4568 4569 #### Command prompt 4570 4571 # Tested with WinNT 4.0, the telnet application assumes the screensize is 4572 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. 4573 # 4574 # Other notes: 4575 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough 4576 # for casual (occasional) use. Also fails several of the vttest screens, 4577 # but that is not unusual for VT100 "emulators". 4578 # b) Does not implement VT100 keypad 4579 # c) Recognizes a subset of VT52 controls. 4580 ms-vt100|MS telnet imitating DEC VT100, 4581 lines#25, 4582 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i 4583 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u 4584 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4585 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, 4586 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, 4587 4588 # Tested with Windows 2000, the telnet application runs in a console window, 4589 # also using 'Terminal' font. 4590 # 4591 # Other notes: 4592 # a) This version has no function keys or numeric keypad. Unlike the older 4593 # version, the numeric keypad is entirely ignored. 4594 # b) The program sets $TERM to "ansi", which of course is inaccurate. 4595 ms-vt100-color|vtnt|windows 2000 ANSI (sic), 4596 bce, 4597 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, 4598 use=ms-vt100, 4599 4600 # Based on comments from Federico Bianchi: 4601 # 4602 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different 4603 # scheme for PF keys. 4604 # 4605 # and PuTTY wishlist: 4606 # 4607 # The modifiers are represented as the codes listed above, prefixed to 4608 # the normal sequences. If the modifier is pressed alone, its sequence 4609 # is transmitted twice in succession. If multiple modifiers apply, 4610 # they're transmitted in the order shift, control, alt. 4611 # 4612 # Shift \E^S 4613 # Alt \E^A, 4614 # Ctrl \E^C, 4615 ms-vt100+|vt100+|windows XP VT100+ (sic), 4616 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, 4617 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, 4618 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, 4619 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, 4620 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, 4621 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, 4622 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, 4623 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, 4624 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, 4625 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, 4626 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, 4627 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, 4628 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, 4629 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, 4630 knp=\E/, kpp=\E?, use=ms-vt100-color, 4631 4632 ms-vt-utf8|vt-utf8|UTF-8 flavor of VT100+, 4633 use=ms-vt100+, 4634 4635 # Windows Terminal (Preview) 4636 # https://github.com/microsoft/terminal 4637 # 4638 # Windows 10 22H2 (also Windows 11) 4639 # Version 1.16.10261.0 4640 # 4641 # - Windows Terminal #1553: "Feature Request: Mouse/Touch/Pointer Bindings 4642 # (like middle-click paste, right-click context menu, etc.)", compare to 4643 # https://learn.microsoft.com/en-us/windows/console/mouse-event-record-str 4644 # This appears to be related to a problem with its implementation of the 4645 # Console API; the mouse does not work in a "Command Window" (e.g., as used 4646 # in the ncurses MinGW driver), although escape sequences work. 4647 # 4648 # Windows 10 21H1 4649 # Version 1.9.1942.0 4650 # 4651 # This has longstanding issues with CR/LF mapping, e.g., 4652 # - first reported by Juergen Pfeifer August 13, 2020, with workaround 4653 # - Windows Terminal #8303 "Updates to ms-terminal terminal type in terminfo to 4654 # 1.4 from 0.2" 4655 # - Windows Terminal #6733 "Midnight Commander (mc) output is screwed when 4656 # using the 'ms-terminal' as $TERM" 4657 # 4658 # still seen in testing during May-July 2021. As a workaround, this terminal 4659 # description sets cud1 to an escape sequence rather than just \r. 4660 # 4661 # Using TERM=xterm-256color shows a number of problems. 4662 # A few are seen only in the WSL2 environment. 4663 # 4664 # tack: 4665 # - flash does not work. 4666 # - video attribute blink does not work. 4667 # - video attribute invis does not work in WSL2. 4668 # - italics sitm/ritm do not work in WSL2. 4669 # - crossed-out smxx/rmxx do not work in WSL2. 4670 # - reloading colors via initp interchanges red/blue. 4671 # - does not implement OSC 104, which is used for resetting colors in xterm. 4672 # - does not support numeric keypad application mode. 4673 # - control-modifier (without alt/shift) does not work for special keys. 4674 # - meta-key sends escape character rather than acting as a meta key. 4675 # 4676 # vttest: 4677 # - identifies itself as a VT100. 4678 # - cursor movement (menu 1) does not work properly, e.g., for wrapping. 4679 # - does not support 8-bit controls. 4680 # - does not support VT420 rectangles. 4681 # - does not support VT420 left/right margins. 4682 # - ECMA-48 cursor-movement works. 4683 # - does not support X10 mouse, or mouse highlight tracking. 4684 # - SGR mouse mode 1006 works. 4685 # - any-event mouse mode shows no focus-in/focus-out events. 4686 # - alternate screen 47/48 modes do not work, nor do 1047/1048. 4687 # - alternate screen 1049 mode works. 4688 # - none of the window report/modify operations work. 4689 # - none of the DECRPM/DECRQM reporting operations work. 4690 # 4691 # xterm: 4692 # - 256colors2.pl -r, -i and -q options work. 4693 # - dynamic colors do not work. 4694 # - paste64.pl does not work, i.e., bracketed-paste. 4695 # - tcapquery.pl does not work. 4696 # 4697 # Windows 10 1903 4698 # Version 0.2.1831.0 4699 # 4700 # The task manager shows this as "OpenConsole.exe", which differs 4701 # from the "Windows Command Processor" used for the command-prompt. 4702 # 4703 # The settings dialog does not work (unless the end user expects to open 4704 # profiles.json in Visual Studio). There is no documentation, of course. 4705 # 4706 # Testing via an ssh connection, using openssh: 4707 # - the program sets TERM to cygwin if the tab is set to PowerShell, 4708 # and to xterm-256color if "Legacy". However, in the latter, more tests 4709 # fail in vttest, which does not pay attention to TERM. 4710 # vttest: 4711 # - menu 1 (tests for cursor movement) misbehaves like command-prompt 4712 # - primary DA says this is a vanilla VT100 4713 # - does not flush response to primary DA, leaving a ^M on the end when 4714 # the PowerShell tab is used. Both the "Legacy" tab and the command-prompt 4715 # work properly in this test. 4716 # - in the generic VT100 tests, there are problems with character sets 4717 # (diamond shows as a double-width character, DEL as two replacement-chars). 4718 # - outside of the generic VT100 tests, the program does poorly because most 4719 # of the features are missing. 4720 # - ECH does not work properly 4721 # - a few generic xterm features are supported (set window title), but 4722 # others are missing (such as the mouse). 4723 # - the cursor visible/invisible works in the PowerShell tab, not in "Legacy" 4724 # tack: 4725 # - blink, dim, bold, invis, protect do not work 4726 # - bce works (but per vttest, with ED, EL, not ECH) 4727 # - does not support keypad application mode 4728 # - implements most of the xterm modified keys; sometimes modifiers are ignored 4729 # or simply incorrect 4730 # - sends escape+key rather than implementing meta mode 4731 # other: 4732 # - color palette can be altered, but OSC 104 for resetting does not work 4733 # - crashed with a script used for testing NRCS. 4734 # - does not recognize either xterm+direct or xterm+indirect escapes. 4735 ms-terminal|Windows10 terminal, 4736 npc, 4737 cud1=\E[B, kcbt=\E[Z, rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@, 4738 Cr@, Ms@, use=linux+kbs, use=xterm+256color, 4739 use=xterm+pcfkeys, use=ansi+rep, use=xterm+sm+1006, 4740 use=ecma+index, use=ecma+italics, use=ecma+strikeout, 4741 use=xterm-basic, use=xterm+tmux, 4742 4743 #### Visual Studio 4744 # Visual Studio Code 1.45.0 uses xterm.js 12.8.1 (see https://xtermjs.org/). 4745 # 4746 # vttest: 4747 # - fixes menu 1 problem with wrapping 4748 # - supports DECALN 4749 # - fixes menu 8 problem with delete-character 4750 # - REP, SL/SL work 4751 # - keypad application mode still does not work; PF1-PF4 are not assigned. 4752 # - DECRQM/DECRPM do not work 4753 # - xterm mouse features: 4754 # - SGR coordinates work; the other modes do not (see vscode #96058) 4755 # - focus-events are not sent 4756 # - mouse highlight tracking does not send button event 4757 # tack/other: 4758 # - little or no change since previous review 4759 # 4760 # Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/). 4761 # https://code.visualstudio.com/docs/editor/integrated-terminal 4762 # 4763 # This sets TERM to xterm-256color, which is a little more successful than 4764 # Windows Terminal. 4765 # 4766 # vttest: 4767 # - menu 1 (cursor movement) has problems with wrapping 4768 # - claims to be a VT100 with AVO, but copies xterm #276's secondary response 4769 # - menu 8 (insert/delete char/line) has problem with delete-character 4770 # - like Windows Terminal, fails the ECH test: neither supports DECALN 4771 # However, the bce test with ECH works. 4772 # - does not support keypad application mode 4773 # - supports most xterm mode controls (except DEC Locator Events) 4774 # - REP, SL/SL do not work, but SD/SU work. 4775 # - the alternate-screen tests fail because it does not support DECALN 4776 # - window modify/report is not supported 4777 # - supports some VT320 presentation reports 4778 # tack: 4779 # - does not support blinking text 4780 # - implements most of the xterm modified keys, with some exceptions: 4781 # - pageup/pagedown do not send escapes 4782 # - alt cursor left/right send escape-b and escape-f 4783 # - sends UTF-8 like xterm for meta mode 4784 # other: 4785 # - mouse mode is not reset by reset-sequence 4786 # - supports italics and dim, but not cross-out or double-underline 4787 # - color-palette cannot be changed 4788 vscode|xterm.js|Visual Studio Code terminal using xterm.js, 4789 npc, 4790 kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=linux+kbs, 4791 use=xterm+256setaf, use=ecma+index, use=xterm+focus, 4792 use=xterm+sm+1006, use=xterm+pcfkeys, use=ecma+italics, 4793 use=xterm-basic, use=bracketed+paste, 4794 vscode-direct|Visual Studio Code with direct-colors, 4795 use=xterm+indirect, use=vscode, 4796 4797 ######## X TERMINAL EMULATORS 4798 #### XTERM 4799 # 4800 # You can add the following line to your .Xdefaults to change the terminal type 4801 # set by the xterms you start up to my-xterm: 4802 # 4803 # *termName: my-xterm 4804 # 4805 # System administrators can change the default entry for xterm instances 4806 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either 4807 # case, xterm will detect and reject an invalid terminal type, falling back 4808 # to the default of xterm. 4809 # 4810 4811 # X10/6.6 11/7/86, minus alternate screen, plus (csr) 4812 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string; 4813 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) 4814 # as these seem not to work -- esr) 4815 x10term|vs100-x10|xterm terminal emulator (X10 window system), 4816 OTbs, am, km, mir, msgr, xenl, xon, 4817 cols#80, it#8, lines#65, 4818 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 4819 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 4820 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 4821 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 4822 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 4823 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 4824 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 4825 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 4826 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 4827 smso=\E[7m, smul=\E[4m, 4828 # csl is extension which clears the status line 4829 x10term+sl|status-line for X10 xterm, 4830 eslok, hs, 4831 dsl=\E[?H, fsl=\E[?F, tsl=\E[?E\E[?%i%p1%dT, csl=\E[?E, 4832 4833 # Compatible with the R5 xterm 4834 # (from the XFree86 3.2 distribution, <blink=@> removed) 4835 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD 4836 # corrected typos in rs2 string - TD 4837 # added u6-u9 -TD 4838 xterm-r5|xterm R5 version, 4839 OTbs, am, km, msgr, xenl, 4840 cols#80, it#8, lines#24, 4841 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 4842 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4843 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 4844 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4845 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4846 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 4847 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB, 4848 kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[31~, kel=\E[8~, kf0=\EOq, 4849 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 4850 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, 4851 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~, 4852 kil1=\E[30~, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, 4853 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 4854 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, 4855 sc=\E7, 4856 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 4857 %;m, 4858 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 4859 smul=\E[4m, tbc=\E[3g, use=vt220+pcedit, use=vt100+enq, 4860 use=xterm+kbs, 4861 4862 # Compatible with the R6 xterm 4863 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed) 4864 # added khome/kend, hts based on the R6 xterm code - TD 4865 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this 4866 # for compatibility with other emulators). 4867 xterm-r6|xterm X11R6 version, 4868 OTbs, am, km, mir, msgr, xenl, 4869 cols#80, it#8, lines#24, 4870 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4871 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 4872 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4873 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 4874 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4875 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4876 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 4877 il1=\E[L, ind=\n, 4878 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, 4879 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~, 4880 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 4881 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 4882 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 4883 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 4884 kf8=\E[19~, kf9=\E[20~, kmous=\E[M, meml=\El, memu=\Em, 4885 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, 4886 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 4887 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, 4888 sgr0=\E[m, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=, 4889 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=xterm+alt47, 4890 use=vt220+vtedit, use=xterm+kbs, use=vt100+enq, 4891 xterm-old|antique xterm version, 4892 use=xterm-r6, 4893 # The monochrome version began as a copy of "xtermm" (from Solaris), and was 4894 # initially part of the xterm sources (in XFree86). But "xterm" continued to 4895 # grow, while "xterm-mono" had none of the newer features. Additionally, 4896 # inheriting from "xtermm" runs into several problems, including different 4897 # function keys as well as the fact that the mouse support is not compatible. 4898 # This entry restores the original intent, intentionally not an alias to 4899 # simplify maintenance -TD 4900 xterm-mono|monochrome xterm, 4901 use=xterm-r6, 4902 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. 4903 # The name has been changed and some aliases have been removed. 4904 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 4905 OTbs, am, bce, km, mir, msgr, xenl, XT, 4906 cols#80, it#8, lines#24, ncv@, 4907 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4908 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, 4909 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4910 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 4911 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4912 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4913 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 4914 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 4915 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 4916 il1=\E[L, ind=\n, 4917 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 4918 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4919 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 4920 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 4921 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 4922 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 4923 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4924 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, 4925 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, 4926 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 4927 rmso=\E[27m, rmul=\E[24m, rs1=^O, 4928 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 4929 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 4930 %=%t3%e%p1%d%;m, 4931 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 4932 %=%t3%e%p1%d%;m, 4933 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 4934 %;m%?%p9%t\016%e\017%;, 4935 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 4936 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 4937 vpa=\E[%i%p1%dd, use=xterm+alt47, use=xterm+kbs, 4938 use=vt100+enq, use=ecma+color, use=vt220+cvis, 4939 use=vt220+keypad, 4940 4941 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 4942 # codes for F1-F4 except while in VT220 mode. 4943 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 4944 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, 4945 4946 # This version was released in XFree86 3.3.3 (November 1998). 4947 # Besides providing printer support, it exploits a new feature that allows 4948 # xterm to use terminfo-based descriptions with the titeInhibit resource. 4949 # -- the distribution contained incorrect khome/kend values -TD 4950 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), 4951 blink=\E[5m, ich1@, invis=\E[8m, 4952 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, 4953 rmcup=\E[?1047l\E[?1048l, rs1=\Ec, 4954 rs2=\E[!p\E[?3;4l\E[4l\E>, 4955 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 4956 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 4957 smcup=\E[?1048h\E[?1047h, use=ansi+pp, 4958 use=xterm-xf86-v33, 4959 4960 # This version was released in XFree86 4.0. 4961 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 4962 npc, 4963 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, 4964 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, 4965 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kf13=\EO2P, kf14=\EO2Q, 4966 kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, 4967 kf19=\E[18;2~, kf20=\E[19;2~, kf21=\E[20;2~, 4968 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, 4969 kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, 4970 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 4971 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 4972 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 4973 kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, kf43=\E[18;6~, 4974 kf44=\E[19;6~, kf45=\E[20;6~, kf46=\E[21;6~, 4975 kf47=\E[23;6~, kf48=\E[24;6~, 4976 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? 4977 %p9%t\016%e\017%;, 4978 use=xterm+alt1049, use=xterm-xf86-v333, 4979 4980 # This version was released in XFree86 4.3. 4981 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), 4982 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 4983 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, 4984 kbeg@, 4985 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 4986 %p7%t;8%;m%?%p9%t\016%e\017%;, 4987 use=xterm-xf86-v40, 4988 4989 # Controlling the cursor-visibility is not a "new" feature, but was generally 4990 # neglected in terminal emulators until the mid-1990s. These would work for 4991 # the hardware terminals, or for more recent emulators, e.g., xterm. 4992 vt220+cvis|DECTCEM VT220 cursor-visibility, 4993 civis=\E[?25l, cnorm=\E[?25h, 4994 vt220+cvis8|8-bit DECTCEM VT220 cursor-visibility, 4995 civis=\233?25l, cnorm=\233?25h, 4996 # The first block is for terminals which did not support blinking cursor. 4997 att610+cvis0|AT&T 610 cursor-visibility, 4998 civis=\E[?25l, cnorm=\E[?12l\E[?25h, 4999 att610+cvis|AT&T 610 cursor-visibility with blink, 5000 civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, 5001 5002 # This version was released in XFree86 4.4. 5003 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), 5004 use=att610+cvis, use=ecma+index, use=xterm-xf86-v43, 5005 5006 xterm-xfree86|xterm terminal emulator (XFree86), 5007 use=xterm-xf86-v44, 5008 5009 xterm+nofkeys|building block for xterm fkey-variants, 5010 npc, 5011 kcbt=\E[Z, nel=\EE, use=ecma+index, use=ansi+rep, 5012 use=ecma+strikeout, use=vt420+lrmm, use=xterm+focus, 5013 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics, 5014 use=xterm+keypad, use=xterm-basic, 5015 5016 xterm-p370|xterm patch #370, 5017 rv=\E\\[41;[1-6][0-9][0-9];0c, 5018 xr=\EP>\\|XTerm\\([1-9][0-9]+\\)\E\\\\, 5019 use=ecma+index, use=ansi+rep, use=ecma+strikeout, 5020 use=xterm+pcfkeys, use=xterm+nofkeys, 5021 use=bracketed+paste, use=report+version, 5022 use=xterm+focus, 5023 5024 xterm-p371|xterm patch #371, 5025 use=dec+sl, use=xterm-p370, 5026 5027 # This version reflects the current xterm features. 5028 xterm-new|modern xterm terminal emulator, 5029 use=xterm-p370, 5030 5031 # This fragment is for people who cannot agree on what the backspace key 5032 # should send. The ncurses configure script option "--with-xterm-kbs" can 5033 # set it to BS (standard) or DEL (Linux's notion of "vt220"). xterm provides 5034 # either, depending on how the pseudoterminals are configured. 5035 xterm+kbs|fragment for backspace key, 5036 kbs=^H, 5037 5038 # Use this fragment for terminals that always use DEL for "backspace". 5039 linux+kbs|fragment for "backspace" key, 5040 kbs=^?, 5041 # 5042 # This fragment describes as much of XFree86 xterm's "pc-style" function 5043 # keys as will fit into terminfo's 60 function keys. 5044 # From ctlseqs.ms: 5045 # Code Modifiers 5046 # --------------------------------- 5047 # 2 Shift 5048 # 3 Alt 5049 # 4 Shift + Alt 5050 # 5 Control 5051 # 6 Shift + Control 5052 # 7 Alt + Control 5053 # 8 Shift + Alt + Control 5054 # --------------------------------- 5055 # The meta key may also be used as a modifier in this scheme, adding another 5056 # bit to the parameter. 5057 xterm+pcfkeys|xterm fragment for PC-style fkeys, 5058 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2, 5059 use=xterm+pce2, 5060 5061 # The xterm ctrlFKeys resource defaults to 10, so without the "pc-style" 5062 # feature, e.g., setting the modifyCursorKeys and modifyFunctionKeys resources 5063 # to -1 to disable them, one gets 42 function-keys on a 12-function-key 5064 # keyboard, e.g., 5065 # kf1 = \E[11~ 5066 # kf11 shift f1 = \E[23~ 5067 # kf21 control f1 = \E[42~ 5068 # kf31 shift control f1 = \E[52~ 5069 xterm+nopcfkeys|fragment without PC-style fkeys, 5070 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 5071 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 5072 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, 5073 kf20=\E[34~, kf21=\E[42~, kf22=\E[43~, kf23=\E[44~, 5074 kf24=\E[45~, kf25=\E[46~, kf26=\E[47~, kf27=\E[48~, 5075 kf28=\E[49~, kf29=\E[50~, kf3=\E[13~, kf30=\E[51~, 5076 kf31=\E[52~, kf32=\E[53~, kf33=\E[54~, kf34=\E[55~, 5077 kf35=\E[56~, kf36=\E[57~, kf37=\E[58~, kf38=\E[59~, 5078 kf39=\E[60~, kf4=\E[14~, kf40=\E[61~, kf41=\E[62~, 5079 kf42=\E[63~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 5080 kf8=\E[19~, kf9=\E[20~, 5081 5082 xterm+noapp|fragment with cursor keys in normal mode, 5083 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, 5084 khome=\E[H, 5085 5086 xterm+app|fragment with cursor keys in application mode, 5087 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, 5088 khome=\EOH, 5089 # 5090 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) 5091 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators 5092 # copied the earlier scheme, as noted in the "use=" clauses in this file. 5093 # 5094 # The original assignments from patch #94 for cursor-keys had some technical 5095 # issues: 5096 # 5097 # A parameter for a function-key to represent a modifier is just more 5098 # bits. But for a cursor-key it may change the behavior of the 5099 # application. For instance, emacs decodes the first parameter of a 5100 # cursor-key as a repeat count. 5101 # 5102 # A parameterized string should (really) not begin with SS3 (\EO). 5103 # Rather, CSI (\E[) should be used. 5104 # 5105 # For these reasons, the original assignments were deprecated. For 5106 # compatibility reasons, they are still available as a setting of xterm's 5107 # modifyCursorKeys resource. These fragments list the modified cursor-keys 5108 # that might apply to xterm+pcfkeys with different values of that resource. 5109 # 5110 # These entries will have warnings when checking with tic because the kri/kind 5111 # capabilities duplicate the kUP/kDN extensions. This is intentional, though 5112 # not part of the original plan. The changes for xterm patch #206 (2005/11/3) 5113 # show that kri/kind were seen much later as part of a set including kLFT/kRIT: 5114 # 5115 # * modify xterm-new terminfo entry to use capabilities for shifted 5116 # scroll forward/reverse as shifted cursor up/down. 5117 # 5118 # In the 1980s when terminfo was defined, the developers made more of 5119 # a distinction between shifted up/down versus shifted left/right since most 5120 # terminals can index (scroll up/down), while few can scroll left/right. 5121 xterm+pcc3|fragment with modifyCursorKeys:3, 5122 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, 5123 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, 5124 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, 5125 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, 5126 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, 5127 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, 5128 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, 5129 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, 5130 kUP7=\E[>1;7A, 5131 5132 xterm+pcc2|fragment with modifyCursorKeys:2, 5133 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, 5134 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, 5135 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, 5136 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, 5137 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, 5138 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, 5139 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, 5140 5141 xterm+pcc1|fragment with modifyCursorKeys:1, 5142 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, 5143 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, 5144 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, 5145 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, 5146 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, 5147 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, 5148 5149 xterm+pcc0|fragment with modifyCursorKeys:0, 5150 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, 5151 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, 5152 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, 5153 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, 5154 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, 5155 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, 5156 5157 # 5158 # Here are corresponding fragments from xterm patch #216: 5159 # 5160 xterm+pcf0|fragment with modifyFunctionKeys:0, 5161 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 5162 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 5163 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 5164 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 5165 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 5166 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, 5167 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 5168 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 5169 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 5170 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, 5171 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 5172 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, 5173 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, 5174 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, 5175 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, 5176 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, 5177 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5178 # 5179 xterm+pcf2|fragment with modifyFunctionKeys:2, 5180 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 5181 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, 5182 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 5183 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 5184 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, 5185 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, 5186 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 5187 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 5188 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, 5189 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, 5190 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 5191 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, 5192 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, 5193 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, 5194 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, 5195 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, 5196 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, 5197 kf8=\E[19~, kf9=\E[20~, 5198 # 5199 # Chunks from xterm #230: 5200 xterm+pce2|fragment with modifyCursorKeys:2 editing-keys, 5201 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 5202 kNXT=\E[6;2~, kPRV=\E[5;2~, kDC3=\E[3;3~, kDC4=\E[3;4~, 5203 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, 5204 kEND4=\E[1;4F, kEND5=\E[1;5F, kEND6=\E[1;6F, 5205 kEND7=\E[1;7F, kHOM3=\E[1;3H, kHOM4=\E[1;4H, 5206 kHOM5=\E[1;5H, kHOM6=\E[1;6H, kHOM7=\E[1;7H, 5207 kIC3=\E[2;3~, kIC4=\E[2;4~, kIC5=\E[2;5~, kIC6=\E[2;6~, 5208 kIC7=\E[2;7~, kNXT3=\E[6;3~, kNXT4=\E[6;4~, 5209 kNXT5=\E[6;5~, kNXT6=\E[6;6~, kNXT7=\E[6;7~, 5210 kPRV3=\E[5;3~, kPRV4=\E[5;4~, kPRV5=\E[5;5~, 5211 kPRV6=\E[5;6~, kPRV7=\E[5;7~, use=xterm+edit, 5212 5213 xterm+edit|fragment for 6-key editing-keypad, 5214 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 5215 use=xterm+pc+edit, 5216 5217 xterm+pc+edit|fragment for pc-style editing keypad, 5218 kend=\E[4~, khome=\E[1~, 5219 5220 xterm+vt+edit|fragment for VT220-style editing keypad, 5221 kfnd=\E[1~, kslt=\E[4~, 5222 5223 # These variations for alternate-screen and title-stacking were introduced by 5224 # xterm patch #331: 5225 xterm+noalt|xterm without altscreen, 5226 rmcup@, smcup@, 5227 5228 xterm+alt47|X11R4 alternate-screen, 5229 rmcup=\E[2J\E[?47l\E8, smcup=\E7\E[?47h, 5230 5231 xterm+alt1049|xterm 90 feature, 5232 rmcup=\E[?1049l, smcup=\E[?1049h, 5233 5234 xterm+titlestack|xterm 251 feature, 5235 rmcup=\E[23;0;0t, smcup=\E[22;0;0t, 5236 5237 xterm+alt+title|xterm 90 and 251 features combined, 5238 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t, 5239 5240 # https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad 5241 # 5242 # Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the 5243 # problem that the keypad layout is different, and that the natural choice for 5244 # PF1 is NumLock (which happens to be reserved for other use). To work around 5245 # that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not 5246 # directly related to VT100. 5247 # 5248 # With the VT220 keypad block that uses the 1-9 keys as suggested in 5249 # terminfo(5), the other keys can be handled with user-defined capabilities: 5250 # 5251 # _______________________________________ 5252 # | NumLock | / | * | - | 5253 # | | $Oo | $Oj | $OS | 5254 # |_________|__kpDIV__|__kpMUL__|__kpSUB__| 5255 # | 7 8 9 | + | 5256 # | $Ow | $Ox | $Oy | $Ok | 5257 # |_ka1__K1_|_________|_ka3__K3_| kpADD | 5258 # | 4 | 5 | 6 | | 5259 # | $Ot | $Ou | $Ov | | 5260 # |_________|_kb2__K2_|_________|_________| 5261 # | 1 | 2 | 3 | | 5262 # | $Oq | $Or | $Os | | 5263 # |_kc1__K4_|_________|_kc3__K5_| enter | 5264 # | 0 | . | $OM | 5265 # | $Op | $On | | 5266 # |_______kpZRO_______|__kpDOT__|_kent_@8_| 5267 # 5268 # ka2, kb1, kb3 and kc2 are extensions, as are the mixed-case names. 5269 # There are no termcap equivalents for these extensions. 5270 # 5271 # kpCMA (comma) is used here for the VT100 keypad, which xterm emulates with 5272 # shifted-keypad-plus, though normally that invokes a font-size change. 5273 # 5274 # Old versions of xterm, e.g., xterm-xfree86, documented \EOE as kb2, which 5275 # does not fit into this layout. The extension kp5 fits, but is not visible 5276 # to termcap applications. As an alternative, kbeg (which does have a termcap 5277 # equivalent) is provided. 5278 # 5279 xterm+keypad|xterm emulating VT100/VT220 numeric keypad, 5280 kbeg=\EOE, kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo, 5281 kpDOT=\EOn, kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp, 5282 use=vt220+keypad, 5283 # 5284 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false). 5285 # Alternatively, the same scheme with old-style function keys as in xterm-r6 5286 # is shown here (because that is used in mrxvt and mlterm): 5287 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2, 5288 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, 5289 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~, 5290 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~, 5291 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, 5292 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~, 5293 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~, 5294 kf63=\E[13;4~, use=xterm+pcf2, 5295 # 5296 xterm+acs|ISO-2022 alternate character-switching for xterm, 5297 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5298 enacs@, rmacs=\E(B, smacs=\E(0, 5299 5300 # This chunk is used for building the VT220/Sun/PC keyboard variants. 5301 xterm-basic|modern xterm terminal emulator - common, 5302 OTbs, am, bce, mir, msgr, xenl, AX, XT, 5303 colors#8, cols#80, it#8, lines#24, pairs#64, 5304 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5305 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, 5306 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5307 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 5308 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5309 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 5310 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 5311 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 5312 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 5313 ind=\n, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, 5314 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, 5315 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 5316 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 5317 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, 5318 setaf=\E[3%p1%dm, 5319 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 5320 %=%t3%e%p1%d%;m, 5321 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 5322 %=%t3%e%p1%d%;m, 5323 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%; 5324 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 5325 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 5326 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 5327 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs, 5328 use=xterm+alt+title, use=ansi+enq, use=att610+cvis, 5329 use=xterm+meta, 5330 5331 xterm+meta|meta mode for xterm, 5332 km, 5333 rmm=\E[?1034l, smm=\E[?1034h, 5334 5335 # From: David J. MacKenzie <djm (at] va.pubnix.com>, 14 Nov 1997 5336 # In retrospect, something like xterm-r6 was intended here -TD 5337 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, 5338 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, 5339 5340 #### XTERM Colors 5341 5342 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 5343 # (T.Dickey) 5344 # 5345 # If configured to support 88- or 256-colors (which is fairly common in 2009), 5346 # xterm also recognizes the control sequences for initc -TD 5347 xterm-16color|xterm with 16 colors like aixterm, 5348 ccc, 5349 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%* 5350 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 5351 use=xterm+osc104, use=ibm+16color, use=xterm-new, 5352 5353 # 256-colors is a compile-time feature of XFree86 xterm beginning with 5354 # xterm patch #111 (1999/7/10) -TD 5355 xterm+256color|original xterm 256-color feature, 5356 ccc, 5357 colors#0x100, pairs#0x10000, 5358 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%* 5359 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 5360 oc=\E]104\007, 5361 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48; 5362 5;%p1%d%;m, 5363 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5 5364 ;%p1%d%;m, 5365 setb@, setf@, 5366 5367 # The semicolon separator used in xterm+256color does not follow the ECMA-48 5368 # standard. Since patch #282 (in 2012), xterm has supported both the legacy 5369 # subparameter separator (semicolon) and the standard (colon). 5370 # 5371 # The xterm FAQ gives some of the history: 5372 # https://invisible-island.net/xterm/xterm.faq.html#color_by_number 5373 xterm+256color2|xterm 256-color feature, 5374 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48: 5375 5:%p1%d%;m, 5376 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38:5 5377 :%p1%d%;m, 5378 use=xterm+256color, 5379 5380 # xterm OSC 104 resets the color palette. Using it as part of xterm+256color 5381 # has the drawback that some of the xterm-alikes which use that building block 5382 # require a different approach to rs1 -TD 5383 xterm+osc104|reset color palette, 5384 oc=\E]104\007, rs1=\Ec\E]104\007, 5385 5386 # palette is hardcoded... 5387 xterm+256setaf|xterm 256-color (set-only), 5388 ccc@, 5389 colors#0x100, pairs#0x10000, 5390 initc@, op=\E[39;49m, 5391 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48; 5392 5;%p1%d%;m, 5393 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5 5394 ;%p1%d%;m, 5395 setb@, setf@, 5396 5397 # 88-colors is a compile-time feature of XFree86 xterm beginning with 5398 # xterm patch #115 (1999/9/18) -TD 5399 # 5400 # Note that the escape sequences used are the same as for 256-colors - xterm 5401 # has a different table of default color resource values. If built for 5402 # 256-colors, it can still handle an 88-color palette by using the initc 5403 # capability. 5404 # 5405 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals 5406 # which support the xterm+256color feature support the associated initc 5407 # capability. So it is cancelled in the entries which use this and/or the 5408 # xterm+256color block. 5409 # 5410 # The default color palette for the 256- and 88-colors are different. A 5411 # given executable will have one palette (perhaps compiled-in). If the program 5412 # supports xterm's control sequence, it can be programmed using initc. 5413 xterm+88color|original xterm 88-color feature, 5414 colors#88, pairs#7744, use=xterm+256color, 5415 5416 xterm+88color2|xterm 88-color feature, 5417 colors#88, pairs#7744, use=xterm+256color2, 5418 5419 # These variants of XFree86 3.9.16 xterm are built as a configure option. 5420 xterm-256color|xterm with 256 colors, 5421 use=xterm+osc104, use=xterm+256color, use=xterm-new, 5422 xterm-88color|xterm with 88 colors, 5423 use=xterm+osc104, use=xterm+88color, 5424 use=xterm-256color, 5425 5426 # Emacs 26.1 and later support direct color mode in terminals, using a 5427 # combination of user-defined capabilities and ncurses-dependent function 5428 # calls. We will not include that here. 5429 # 5430 # Here is a first revision, which (disregarding the reuse of colors 1-7 which 5431 # is of interest only to the numerically illiterate), is compatible with other 5432 # terminal descriptions written for curses. It relies upon the extended range 5433 # for numeric capabilities provided in ncurses 6.1: 5434 xterm+direct2|xterm with direct-color indexing (old building-block), 5435 RGB, 5436 colors#0x1000000, pairs#0x10000, CO#8, 5437 initc@, op=\E[39;49m, 5438 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2:%p1%{65536}%/%d:%p1%{256} 5439 %/%{255}%&%d:%p1%{255}%&%d%;m, 5440 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2:%p1%{65536}%/%d:%p1%{256} 5441 %/%{255}%&%d:%p1%{255}%&%d%;m, 5442 setb@, setf@, 5443 xterm-direct2|xterm with direct-color indexing (old), 5444 use=xterm+direct2, use=xterm+titlestack, use=xterm, 5445 5446 # That in turn had a problem: in the original patch submitted for KDE konsole 5447 # in 2006, the submitter and the developer alike overlooked a "color space 5448 # identifier" parameter. This version provides for that parameter: 5449 xterm+direct|xterm with direct-color indexing (building-block), 5450 RGB, 5451 colors#0x1000000, pairs#0x10000, CO#8, 5452 initc@, op=\E[39;49m, 5453 setab=\E[%?%p1%{8}%<%t4%p1%d%e48:2::%p1%{65536}%/%d:%p1 5454 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m, 5455 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38:2::%p1%{65536}%/%d:%p1 5456 %{256}%/%{255}%&%d:%p1%{255}%&%d%;m, 5457 setb@, setf@, 5458 xterm-direct|xterm with direct-color indexing, 5459 use=xterm+direct, use=xterm, 5460 5461 # Here are corresponding flavors for terminals which could use the feature: 5462 iterm2-direct|iTerm2 with direct-color indexing, 5463 use=xterm+direct, use=iterm2, 5464 mlterm-direct|mlterm with direct-color indexing, 5465 use=xterm+direct, use=mlterm, 5466 5467 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw 5468 # that xterm's original implementation should have used colons for the 5469 # subparameter separators, but chose not to correct this in konsole. As of 5470 # late 2017, konsole still accepts only the nonstandard semicolon delimiters. 5471 xterm+indirect|xterm with direct-color indexing (old legacy building-block), 5472 RGB, 5473 colors#0x1000000, pairs#0x10000, 5474 initc@, op=\E[39;49m, 5475 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256} 5476 %/%{255}%&%d;%p1%{255}%&%d%;m, 5477 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256} 5478 %/%{255}%&%d;%p1%{255}%&%d%;m, 5479 setb@, setf@, 5480 konsole-direct|konsole with direct-color indexing, 5481 use=xterm+indirect, use=konsole, 5482 st-direct|simpleterm with direct-color indexing, 5483 use=xterm+indirect, use=st, 5484 vte-direct|VTE with direct-color indexing, 5485 use=xterm+indirect, use=vte, 5486 # reportedly in Apple's Mohave (fall 2018), but untested -TD 5487 nsterm-direct|nsterm with direct-color indexing, 5488 use=xterm+indirect, use=nsterm, 5489 5490 # As for others (commenting at the time of release for ncurses 6.1): 5491 # + Apple's Terminal.app does not recognize either form of the direct-color 5492 # sequences. 5493 # + Cygwin's mintty recognizes xterm's original implementation, does okay with 5494 # the colors. Like vte, it is a subset of xterm, although different 5495 # omissions/reservations of modified-keys are seen in testing. 5496 # + PuTTY 0.70 seems to recognize xterm's original implementation but does 5497 # nothing useful with the colors. 5498 # + Teraterm 4.97, like PuTTY (no good). 5499 # + terminology 0.91 recognizes xterm's original implementation, but does 5500 # nothing useful with it. 5501 5502 # Reviewing after ncurses 6.2: 5503 # + Apple's Terminal.app is unchanged, has no support for direct color: 5504 # Catalina 10.15.5 Terminal.app 2.10 (433) 5505 # Mohave 10.14.6 - Terminal.app 2.9.5 (421.2) 5506 # + Cygwin's mintty 3.1.7 works with colon/semicolon 5507 # + PuTTY 0.73 works with semicolon 5508 # + Teraterm 4.105 works with semicolon 5509 # + terminology 1.7.0 works with colon/semicolon. 5510 5511 # Other variants are possible, e.g., by using more of xterm's indexed color 5512 # palette, though the intrusion of indexed colors on the direct-color space 5513 # would be more noticeable. 5514 5515 xterm+direct16|xterm with direct-color indexing (16-color building-block), 5516 CO#16, 5517 setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%d%e48 5518 :2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%& 5519 %d%;%;m, 5520 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%d%e38: 5521 2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1%{255}%&%d 5522 %;%;m, 5523 setb@, setf@, use=xterm+direct, 5524 5525 xterm-direct16|xterm with direct-colors and 16 indexed colors, 5526 use=xterm+direct16, use=xterm, 5527 5528 xterm+direct256|xterm with direct-color indexing (256-color building-block), 5529 CO#0x100, 5530 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%? 5531 %p1%{256}%<%t48;5;%p1%d%e48:2::%p1%{65536}%/%d:%p1 5532 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m, 5533 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e%? 5534 %p1%{256}%<%t38;5;%p1%d%e38:2::%p1%{65536}%/%d:%p1 5535 %{256}%/%{255}%&%d:%p1%{255}%&%d%;%;m, 5536 setb@, setf@, use=xterm+direct, 5537 5538 xterm-direct256|xterm with direct-colors and 256 indexed colors, 5539 use=xterm+direct256, use=xterm, 5540 5541 #### XTERM Features 5542 5543 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who 5544 # asked for some of xterm's advanced features to be added to its terminfo 5545 # entry. It defines extended capabilities not found in standard terminfo or 5546 # termcap. These are useful in tmux, for instance, hence the name. 5547 # 5548 # One caveat in adding extended capabilities in ncurses is that if the names 5549 # are longer than two characters, then they will not be visible through the 5550 # termcap interface. 5551 # 5552 # Ms modifies the selection/clipboard. Its parameters are 5553 # p1 = the storage unit (clipboard, selection or cut buffer) 5554 # p2 = the base64-encoded clipboard content. 5555 # 5556 # Ss is used to set the cursor style as described by the DECSCUSR 5557 # function to a block or underline. 5558 # Se resets the cursor style to the terminal power-on default. 5559 # 5560 # Cs and Cr set and reset the cursor colour. 5561 xterm+tmux|advanced xterm features used in tmux (cursor style 2), 5562 Cr=\E]112\007, Cs=\E]12;%p1%s\007, 5563 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q, 5564 xterm+tmux2|advanced xterm features used in tmux, 5565 Cr=\E]112\E\\, Cs=\E]12;%p1%s\E\\, 5566 Ms=\E]52;%p1%s;%p2%s\E\\, Se=\E[ q, Ss=\E[%p1%d q, 5567 5568 # This is another variant, for XFree86 4.0 xterm (T.Dickey) 5569 # This is an 8-bit version of xterm, which emulates DEC VT220 with ANSI color. 5570 # To use it, your decTerminalID resource must be set to 200 or above. 5571 # 5572 # HTS \E H \210 5573 # RI \E M \215 5574 # SS3 \E O \217 5575 # CSI \E [ \233 5576 # 5577 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 5578 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, 5579 colors#8, cols#80, it#8, lines#24, pairs#64, 5580 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5581 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, 5582 civis=\233?25l, clear=\233H\2332J, 5583 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr, 5584 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n, 5585 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 5586 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, 5587 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 5588 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, 5589 flash=\233?5h$<100/>\233?5l, home=\233H, 5590 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, 5591 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m, 5592 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r 5593 \E8, 5594 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q, 5595 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, 5596 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, 5597 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 5598 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 5599 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 5600 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 5601 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 5602 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, 5603 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, 5604 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, 5605 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, 5606 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 5607 rs1=\Ec, 5608 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r 5609 \E8, 5610 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 5611 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1 5612 %{6}%=%t3%e%p1%d%;m, 5613 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1 5614 %{6}%=%t3%e%p1%d%;m, 5615 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 5616 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 5617 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 5618 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, 5619 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, 5620 u8=\233[?%[;0123456789]c, vpa=\233%i%p1%dd, 5621 use=ansi+enq, use=xterm+kbs, 5622 5623 # Note: normally xterm supports modified function-keys as described in 5624 # XTerm - "Other" modified keys 5625 # https://invisible-island.net/xterm/modified-keys.html 5626 # 5627 # However, xterm-hp, xterm-sco and xterm-sun assume no modifiers. Here is 5628 # a simple script which demonstrates these descriptions: 5629 # #!/bin/sh 5630 # export TERM=xterm-$1 5631 # xterm \ 5632 # -kt $1 \ 5633 # -fs 16 -fa mono \ 5634 # -title $TERM \ 5635 # -tn $TERM \ 5636 # -xrm '*modifyCursorKeys:-1' \ 5637 # -xrm '*modifyFunctionKeys:-1' \ 5638 # -e tack 5639 # e.g., "foo sun" if the script is named "foo" -TD 5640 xterm-hp|xterm with hpterm function keys, 5641 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 5642 kdch1=\EP, kend=\EF, khome=\Eh, kich1=\EQ, knp=\ES, kpp=\ET, 5643 use=hp+pfk-cr, use=xterm+nofkeys, use=xterm+nopcfkeys, 5644 5645 xterm-sco|xterm with SCO function keys, 5646 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5647 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 5648 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 5649 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 5650 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 5651 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 5652 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 5653 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 5654 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 5655 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 5656 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 5657 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, 5658 use=xterm+nofkeys, 5659 5660 # The xterm-new description has all of the features, but is not completely 5661 # compatible with VT220. If you are using a Sun or PC keyboard, set the 5662 # sunKeyboard resource to true: 5663 # + maps the editing keypad 5664 # + interprets control-function-key as a second array of keys, so a 5665 # 12-fkey keyboard can support VT220's 20-fkeys. 5666 # + maps numeric keypad "+" to ",". 5667 # + uses DEC-style control sequences for the application keypad. 5668 # 5669 xterm-vt220|xterm emulating VT220, 5670 npc, 5671 kcbt=\E[Z, kend=\E[4~, kf10=\E[21~, kf11=\E[23~, 5672 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 5673 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 5674 kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 5675 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kmous=\E[M, nel=\EE, 5676 use=xterm+app, use=xterm+edit, use=vt220+keypad, 5677 use=ecma+italics, use=ecma+index, use=ansi+rep, 5678 use=ecma+strikeout, use=xterm+focus, use=xterm+sm+1006, 5679 use=xterm+tmux, use=xterm+keypad, use=xterm-basic, 5680 5681 xterm-vt52|xterm emulating DEC VT52, 5682 cols#80, it#8, lines#24, 5683 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5684 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC, 5685 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 5686 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5687 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF, 5688 use=xterm+kbs, use=vt52+keypad, 5689 5690 xterm-noapp|xterm with cursor keys in normal mode, 5691 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, 5692 use=xterm, 5693 5694 xterm-24|vs100|xterms|xterm terminal emulator 24-line (X Window System), 5695 lines#24, use=xterm-old, 5696 5697 # This is xterm for ncurses. 5698 xterm|xterm terminal emulator (X Window System), 5699 use=xterm-new, 5700 5701 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by 5702 # setting the vt100Graphics resource to false. 5703 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode, 5704 U8#1, use=xterm, 5705 5706 # These building-blocks allow access to the X titlebar and icon name as a 5707 # status line. There are a few problems in using them in entries: 5708 # 5709 # a) tsl should have a parameter to denote the column on which to transfer to 5710 # the status line. 5711 # b) the "0" code for xterm updates both icon-title and window title. Some 5712 # window managers such as twm (and possibly window managers descended from 5713 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you 5714 # don't want to mess with icon-name when using those window managers. 5715 # c) fsl ends the escape sequence begun by tsl. Printable characters between 5716 # those (probably) will appear in the window title. Nonprintable characters 5717 # may cause the escape sequence to end with an error. 5718 # d) the BEL (^G or \007) used in the original title-as-statusline came from 5719 # David J. MacKenzie's "pseudo-color" entry in 20 Apr 1995. At that time 5720 # xterm used BEL as the string-terminator rather than ST (\E\\). Either 5721 # BEL or ST has worked since xterm patch #28 in 1996, but most uses of 5722 # this feature have been embedded in shell scripts. 5723 # 5724 # But that issue regarding the parameter for tsl means that applications may 5725 # not rely on it. The SVr4 documentation says tsl will "move to status line, 5726 # column #1". At the point in time when ESR added DJM's "pseudo-color" entry 5727 # with the split-up escape sequence for tsl/fsl, there were 65 entries using 5728 # tsl: 5729 # 32 used a parameter, matching the documentation (including x10term). 5730 # 21 used a parameterless control, exiting from the status line on ^M. 5731 # 6 used parameterless controls for tsl and fsl 5732 # 6 used a split-up escape sequence, e.g., the same approach. 5733 # 5734 # The extension "TS" is preferable, because it does not accept a parameter. 5735 # However, if you are using a non-extended terminfo, "TS" is not visible. 5736 xterm+sl|access X title line and icon name, 5737 hs, 5738 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;, 5739 xterm+sl-twm|access X title line (pacify twm-descended window managers), 5740 hs, 5741 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;, 5742 xterm+sl-alt|alternate access X title line, 5743 hs, 5744 dsl=\E]2;\E\\, fsl=\E\\, tsl=\E]2;, TS=\E]2;, 5745 5746 # In contrast, this block can be used for a DEC VT320 and up. There are two 5747 # controls used. 5748 # 5749 # DECSASD (select active status display) 5750 # \E[0$} Main display 5751 # \E[1$} Status line 5752 # 5753 # DECSSDT (select status line type) 5754 # \E[0$~ No status line 5755 # \E[1$~ Indicator status line 5756 # \E[2$~ Host-writable status line 5757 # 5758 # The building block assumes that the terminal always shows something at the 5759 # status line (either the indicator, or status line). That is because if no 5760 # status line is used, then the terminal makes that line part of the user 5761 # window, changing its size without notice. 5762 # 5763 # Because there is no "esl" (enable status line) capability, the "tsl" 5764 # capability ensures that the status line is host-writable. A DEC terminal 5765 # will clear the status line when changing from indicator to host-writable 5766 # mode. 5767 # 5768 # Once on the status line, the row part of cursor addressing is ignored. Since 5769 # tsl expects a parameter (to specify the column), the shortest addressing that 5770 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5. 5771 # 5772 dec+sl|DEC VTxx status line, 5773 eslok, hs, 5774 dsl=\E[0$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 5775 5776 # 5777 # The following xterm variants don't depend on your base version 5778 # 5779 # xterm with bold instead of underline 5780 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 5781 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%| 5782 %t;7%;m, 5783 smso=\E[7m, smul=\E[1m, use=xterm-old, 5784 5785 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 5786 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 5787 ich@, ich1@, use=xterm, 5788 # From: Mark Sheppard <kimble (at] mistral.co.uk>, 4 May 1996 5789 xterm1|xterm terminal emulator ignoring the alternate screen buffer, 5790 rmcup@, smcup@, use=xterm, 5791 5792 # https://invisible-island.net/xterm/xterm-paste64.html 5793 # 5794 # Bracketed paste was introduced by xterm patch #203 in May 2005, as part of a 5795 # larger feature for manipulating the clipboard selection. Few terminals aside 5796 # from xterm fully implement the clipboard feature, but several copy this 5797 # detail. The names for the extended capabilities here were introduced by vim 5798 # in January 2017, but used internally. In 2023, vim patch 9.0.1117 is needed 5799 # to work with this change. 5800 bracketed+paste|xterm bracketed paste, 5801 BD=\E[?2004l, BE=\E[?2004h, PE=\E[201~, PS=\E[200~, 5802 5803 # https://invisible-island.net/xterm/xterm.log.html#xterm_354 5804 # 5805 # The response is a DSR sequence identifying the version: DCS > | text ST 5806 # For example: 5807 # ^[P>|XTerm(354)^[\ 5808 report+version|Report xterm name and version (XTVERSION), 5809 XR=\E[>0q, xr=\EP>\\|[ -~]+\E\\\\, use=report+da2, 5810 5811 # Vim uses RV to denote the secondary device attributes. Xterm documents the 5812 # - first parameter as the terminal type (extending it to VT100), 5813 # - the second as the patch number for xterm, and 5814 # - the third parameter as zero. 5815 # Other terminals may provide useful responses, though few are documented. 5816 report+da2|report secondary device attributes (DA2), 5817 RV=\E[>c, rv=\E\\[[0-9]+;[0-9]+;[0-9]+c, 5818 5819 #### XTERM Mouse 5820 # The xterm mouse protocol is used by other terminal emulators. 5821 # In this section, two extended capabilities are used to illustrate the mouse 5822 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow 5823 # enabling/disabling other mouse protocols. The "xm" capability describes the 5824 # mouse response; currently there is no interpreter which would use this 5825 # information to make the mouse support completely data-driven. 5826 5827 # Here is the "original" xterm mouse protocol. 5828 # 5829 # First seen in X10.3, February 1986, this likely dates from 1985 based on the 5830 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus 5831 # sequence", referring to the fact that it does not correspond to a "real" 5832 # terminal. The mouse responses for the X10 protocol are sent only for 5833 # button-presses. 5834 xterm+x10mouse|X10 xterm mouse protocol, 5835 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;, 5836 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c, 5837 xterm-x10mouse|X10 xterm mouse, 5838 use=xterm+x10mouse, use=xterm, 5839 5840 # Here is the conventional xterm mouse protocol, introduced with X11R1 in 5841 # September 1987. 5842 # 5843 # The mouse responses for the X11 protocol covered button releases, as well as 5844 # modifiers: 5845 # shift 4 5846 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys) 5847 # control 16 5848 # 5849 # The modifiers are not reflected in this description because as used in xterm 5850 # they are normally inaccessible because the translations resources assign 5851 # shift and control to other features. However, they are important because 5852 # they take up space in the first byte of the response. The other bits of this 5853 # byte are used to encode the button number for both presses and releases. 5854 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2 5855 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to 5856 # provide additional features, e.g., wheel mouse. 5857 # 5858 # X11R1's xterm also supported an "emacs" mouse protocol, with final character 5859 # "t" or "T", which was activated by double-clicking. The "t" response was 5860 # used when the starting/ending positions were the same. 5861 # 5862 # X11R3 (February 1988) added the highlight/tracking mode. 5863 # 5864 # X11R4 (December 1989) added the control sequences document, listing the 5865 # control sequences for the X10/X11 protocols without descriptions. It also 5866 # mentioned the "emacs" ("T") response. Comments in button.c referred to the 5867 # X11 protocol as "DEC VT200 compatible", although DEC offered no such terminal. 5868 # 5869 # X11R5 (November 1993) gave a description of the mouse protocol. 5870 # 5871 # X11R6 (January 1995) moved the control sequences document out of the xterm 5872 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding 5873 # no new information. 5874 xterm+x11mouse|X11 xterm mouse protocol, 5875 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;, 5876 xm=\E[M%?%p4%t%p3%e%{3}%;%'\s'%+%c%p2%'!'%+%c%p1%'!'%+%c, 5877 xterm-x11mouse|X11 mouse, 5878 use=xterm+x11mouse, use=xterm, 5879 5880 # Here is a suggested description of the xterm highlighting protocol. 5881 # A more complicated example could be constructed to account for the "t" 5882 # response. 5883 xterm+x11hilite|X11 xterm mouse protocol with highlight, 5884 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;, 5885 xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c 5886 %p1%'!'%+%cT, 5887 xterm-x11hilite|X11 mouse with highlight, 5888 use=xterm+x11mouse, use=xterm, 5889 5890 # The preceding were the sources from X Consortium. Other sources (or patches) 5891 # were available. Starting in mid-1995, XFree86 developers collected some of 5892 # those changes and began improvements, e.g., to support color. This was, by 5893 # the way, around the same time that rxvt developers began implementing color, 5894 # though dates (and attributions) are not well documented. I became interested 5895 # in xterm in late 1995, and involved in early 1996. To complete the picture, 5896 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD 5897 5898 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an 5899 # "any-event" mouse mode. 5900 # 5901 # These building blocks incorporate later features as well: 5902 # xterm patch #224 (2007/2/11) added private mode 1004, for enabling/disabling 5903 # focus in/out event reporting. 5904 # xterm patch #277 (2012/01/07) added private mode 1006 5905 5906 xterm+sm+1002|xterm any-button mouse, 5907 kmous=\E[<, XM=\E[?1006;1004;1002%?%p1%{1}%=%th%el%;, 5908 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;, 5909 use=xterm+focus, 5910 xterm-1002|example of xterm any-button mouse, 5911 use=xterm+sm+1002, use=xterm, 5912 5913 xterm+sm+1003|xterm any-event mouse, 5914 XM=\E[?1006;1004;1003%?%p1%{1}%=%th%el%;, 5915 use=xterm+sm+1002, 5916 xterm-1003|example of xterm any-event mouse, 5917 use=xterm+sm+1003, use=xterm, 5918 5919 # Some terminal emulators implement xterm focus in/out, but do it incorrectly, 5920 # interfering with user applications. 5921 # https://lists.gnu.org/archive/html/bug-ncurses/2023-10/msg00087.html 5922 xterm+focus|xterm focus-in/out event "keys", 5923 XF, 5924 fd=\E[?1004l, fe=\E[?1004h, kxIN=\E[I, kxOUT=\E[O, 5925 5926 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC 5927 # locator mode. 5928 5929 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by 5930 # dropping support for the X11 mouse protocol's shift-modifier and using 5931 # available bits in the first byte of the response to encode buttons 4 and 5. 5932 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with 5933 # older configurations which might have used the obsolete modifiers. 5934 5935 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode 5936 # where the coordinates in the mouse response would be encoded in UTF-8, 5937 # thereby extending the range of coordinates past 222=(255-33). This is the 5938 # "1005" mouse mode. 5939 xterm+sm+1005|xterm UTF-8 mouse (building block), 5940 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;, 5941 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u, 5942 xterm-1005|xterm UTF-8 mouse, 5943 use=xterm+sm+1005, use=xterm, 5944 5945 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses 5946 # SGR-style parameters. 5947 # 5948 # Someone stated that the 1005 mouse mode would not be handled properly in luit. 5949 # (By the way, this is a problem with the X11 protocol). A more plausible 5950 # criticism is that the responses provided by the 1005 mode are not distinct 5951 # from the non-1005 responses. 5952 # 5953 # As an alternative (and fixing the longstanding limitation of X11 mouse 5954 # protocol regarding button-releases), I provided the 1006 mode, referring 5955 # to it as "SGR 1006" since the replies resemble the SGR control string: 5956 xterm+sm+1006|xterm SGR-mouse (building block), 5957 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;, 5958 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;, 5959 xterm-1006|xterm SGR-mouse, 5960 use=xterm+sm+1006, use=xterm, 5961 5962 # Some terminal emulators implement xterm focus in/out, but do it incorrectly, 5963 # interfering with user applications. 5964 # https://lists.gnu.org/archive/html/bug-ncurses/2023-10/msg00087.html 5965 oldxterm+sm+1006|xterm SGR-mouse (building block), 5966 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;, 5967 xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;, 5968 5969 #### KTERM 5970 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) 5971 # (kterm should not invoke DEC Graphics as the alternate character set 5972 # -- Kenji Rikitake) 5973 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics 5974 # -- MATSUMOTO Shoji) 5975 # kterm implements acsc via built-in table of X Drawable's 5976 kterm|kterm kanji terminal emulator (X window system), 5977 XT, 5978 ncv@, 5979 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, enacs=, 5980 rmacs=\E(B, rmam=\E[?7l, 5981 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e 5982 \E(B%;, 5983 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, use=x10term+sl, 5984 use=xterm-r6, use=ecma+color, 5985 kterm-color|kterm-co|kterm with ANSI colors, 5986 ncv@, use=kterm, use=ecma+color, 5987 5988 #### Other XTERM 5989 5990 # These (xtermc and xtermm) are distributed with Solaris. They refer to a 5991 # variant of xterm which is apparently no longer supported, but are interesting 5992 # because they illustrate SVr4 curses mouse controls - T.Dickey 5993 xtermm|xterm terminal emulator (monochrome), 5994 OTbs, am, km, mir, msgr, xenl, 5995 btns#3, cols#80, it#8, lines#24, 5996 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5997 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 5998 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 5999 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 6000 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6001 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 6002 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, 6003 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 6004 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, 6005 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, 6006 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, 6007 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, 6008 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, 6009 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, 6010 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 6011 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 6012 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 6013 %;m%?%p9%t\016%e\017%;, 6014 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, 6015 smso=\E[7m, tbc=\E[3g, use=decid+cpr, use=vt100+fnkeys, 6016 6017 xtermc|xterm terminal emulator (color), 6018 colors#8, ncv#7, pairs#64, 6019 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6020 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 6021 %=%t3%e%p1%d%;m, 6022 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 6023 %=%t3%e%p1%d%;m, 6024 use=xtermm, 6025 6026 # From: David J. MacKenzie <djm (at] va.pubnix.com> 20 Apr 1995 6027 # Here's a termcap entry I've been using for xterm_color, which comes 6028 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the 6029 # color stuff, I also have a status line defined as the window manager 6030 # title bar. [I have translated it to terminfo -- ESR] 6031 xterm-pcolor|xterm with color used for highlights and status line, 6032 wsl#40, 6033 bold=\E[1;43m, rev=\E[7;34m, 6034 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1 6035 %t;7;31%;%?%p3%t;7;34%;m, 6036 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6, 6037 6038 # This describes the capabilities of color_xterm, an xterm variant from 6039 # before ECMA-48 color support was folded into the main-line xterm release. 6040 # This entry is straight from color_xterm's maintainer. 6041 # From: Jacob Mandelson <jlm (at] ugcs.caltech.edu>, 09 Nov 1996 6042 # The README's with the distribution also say that it supports SGR 21, 24, 25 6043 # and 27, but they are not present in the terminfo or termcap. 6044 color_xterm|cx|cx100|color_xterm color terminal emulator for X, 6045 OTbs, am, km, mir, msgr, xenl, XT, 6046 cols#80, it#8, lines#65, ncv@, 6047 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 6048 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 6049 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 6050 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 6051 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6052 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 6053 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 6054 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, 6055 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, 6056 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, 6057 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 6058 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 6059 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 6060 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 6061 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, 6062 rmso=\E[27m, rmul=\E[24m, 6063 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 6064 sc=\E7, 6065 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 6066 %;m%?%p9%t\016%e\017%;, 6067 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, 6068 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 6069 smul=\E[4m, use=decid+cpr, use=ecma+color, 6070 use=vt220+keypad, 6071 6072 # The IRAF source has a terminfo using "xterm-r5", but line-drawing does not 6073 # work in that case. This entry uses xterm+acs, to work around that problem. 6074 # 6075 # Home/end keys do not work, due to a bug in the X Consortium xterm on which 6076 # this is based: 6077 # 6078 # https://invisible-island.net/xterm/xterm.faq.html#bug_xterm_r6 6079 # 6080 # Comparing to the X11R5 source, xgterm has dynamic and ANSI colors (probably 6081 # not bce). It interchanges mouse buttons 2/3 for menus. 6082 # 6083 # It also has a few features found in later versions of xterm: 6084 # - vi-button and dired-button, 6085 # - i18n stuff like X11R6. 6086 # - colorBD, colorUL 6087 # - scrollBarRight 6088 # 6089 # Debian provides a package for xgterm (and iraf). Although the source for 6090 # xgterm implements the control-sequences for ANSI color, the packaged xgterm 6091 # does nothing with those, even after installing the app-defaults file which 6092 # was overlooked by the Debian packager. 6093 xgterm|graphic terminal for IRAF, 6094 use=xterm+acs, use=xterm-r5, use=xterm+keypad, 6095 6096 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of 6097 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support 6098 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This 6099 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except 6100 # that each of those implements the home, end, delete keys differently. 6101 # 6102 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce 6103 # colors; note that this is not compatible with the 5.2 version. 6104 # csw (2002-05-15): make xterm-color primary instead of nxterm, to 6105 # match XFree86's xterm.terminfo usage and prevent circular links 6106 xterm-color|nxterm|generic color xterm, 6107 ncv@, 6108 op=\E[m, use=xterm-r6, use=klone+color, 6109 6110 # This entry describes an xterm with Sun-style function keys enabled 6111 # via the X resource setting "xterm*sunFunctionKeys:true" 6112 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. 6113 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> 6114 # because we want it to be seen as <kcpy>. 6115 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance 6116 # with their Sun keyboard labels instead. 6117 # From: Simon J. Gerraty <sjg (at] zen.void.oz.au> 10 Jan 1996 6118 xterm-sun|xterm with sunFunctionKeys true, 6119 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, 6120 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, 6121 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, 6122 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, 6123 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, 6124 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, 6125 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, 6126 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, 6127 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, 6128 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, 6129 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, 6130 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, 6131 use=xterm+nofkeys, use=xterm+nopcfkeys, 6132 xterms-sun|small (80x24) xterm with sunFunctionKeys true, 6133 cols#80, lines#24, use=xterm-sun, 6134 6135 #### GNOME (VTE) 6136 # this describes the alpha-version of GNOME terminal shipped with Redhat 6.0 6137 gnome-rh62|GNOME terminal, 6138 bce, 6139 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 6140 use=linux+kbs, use=xterm-color, 6141 6142 # GNOME Terminal 1.4.0.4 (Redhat 7.2) 6143 # 6144 # This implements a subset of VT102 with a random selection of features from 6145 # other terminals such as color and function-keys. 6146 # 6147 # shift-f1 to shift-f10 are f11 to f20 6148 # 6149 # NumLock changes the application keypad to approximate VT100 keypad, except 6150 # that there is no escape sequence matching comma (,). 6151 # 6152 # Other defects observed: 6153 # vt100 LNM mode is not implemented. 6154 # vt100 80/132 column mode is not implemented. 6155 # vt100 DECALN is not implemented. 6156 # vt100 DECSCNM mode is not implemented, so flash does not work. 6157 # vt100 TBC (tab reset) is not implemented. 6158 # xterm alternate screen controls do not restore cursor position properly 6159 # it hangs in tack after running function-keys test. 6160 gnome-rh72|GNOME Terminal in RedHat 7, 6161 bce, km@, 6162 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, 6163 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e 6164 \017%;, 6165 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=vt220+cvis, 6166 use=linux+kbs, use=xterm-color, 6167 6168 # GNOME Terminal 2.0.1 (Redhat 8.0) 6169 # 6170 # Documentation now claims it implements VT220 (which is demonstrably false). 6171 # However, it does implement ECH, which is a VT220 feature. And there are 6172 # workable VT100 LNM, DECALN, DECSNM modes, making it possible to display 6173 # more of its bugs using vttest. 6174 # 6175 # However, note that bce and msgr are broken in this release. Tabs (tbc and 6176 # hts) are broken as well. Sometimes flash (as in xterm-new) works. 6177 # 6178 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu 6179 # operations. Shift-tab generates a distinct sequence so it can be argued 6180 # that it implements kcbt. 6181 gnome-rh80|GNOME Terminal in RedHat 8, 6182 bce@, msgr@, 6183 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kcbt=\E^I, 6184 op=\E[39;49m, use=gnome-rh72, 6185 6186 # GNOME Terminal 2.2.1 (Redhat 9.0) 6187 # 6188 # bce and msgr are repaired. 6189 gnome-rh90|GNOME Terminal in RedHat 9, 6190 bce, msgr, XT, 6191 hpa=\E[%i%p1%dG, kLFT=\EO2D, kRIT=\EO2C, kb2=\E[E, 6192 kcbt=\E[Z, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+pcf0, 6193 use=xterm+pcfkeys, use=gnome-rh80, 6194 6195 # GNOME Terminal 2.14.2 (Fedora Core 5) 6196 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. 6197 gnome-fc5|GNOME Terminal in Fedora Core 5, 6198 rs1=\Ec, 6199 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l 6200 \E[?25h, 6201 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, 6202 6203 # GNOME Terminal 2.18.1 (2007 snapshot) 6204 # 6205 # For any "recent" version of gnome-terminal, it is futile to attempt to 6206 # support modifiers on cursor- and keypad keys because the program usually 6207 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset 6208 # of the keys (which more/less correspond to the termcap values), and will 6209 # interpret those according to the $TERM value, but others not in the 6210 # terminfo according to some constantly changing set of hacker guidelines -TD 6211 vte-2007|VTE in GNOME Terminal snapshot 2.18.1, 6212 use=xterm+pcc2, use=vt220+cvis, use=gnome-fc5, 6213 gnome-2007|GNOME Terminal snapshot 2.18.1, 6214 use=vte-2007, 6215 6216 # GNOME Terminal 2.22.3 (2008 snapshot) 6217 # 6218 # In vttest, it claims to be a VT220 with national replacement character-sets, 6219 # but aside from the identifier string, implements only a small fraction of 6220 # VT220's behavior, which will make it less usable on a VMS system (unclear 6221 # what the intent of the developer is, since the NRC feature exposed in vttest 6222 # by this change does not work). 6223 vte-2008|VTE in GNOME Terminal snapshot 2.22.3, 6224 use=vte+pcfkeys, use=vte-2007, 6225 gnome-2008|GNOME Terminal snapshot 2.22.3, 6226 use=vte-2008, 6227 6228 # GNOME Terminal 3.6.0 (2012) 6229 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied 6230 # in ncurses). It inherited from gnome-fc5, which broke the modified forms 6231 # of f1-f4 -TD 6232 # 6233 # Testing with tack shows that flash does not/has not worked -TD 6234 vte-2012|VTE 0.34.1, 6235 ncv#16, 6236 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m, 6237 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3 6238 %|%t;7%;m%?%p9%t\016%e\017%;, 6239 use=ecma+italics, use=vte-2008, 6240 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has 6241 # 61 differences from a correct entry for gnome terminal. 6242 gnome-2012|GNOME Terminal 3.6.0, 6243 use=vte-2012, 6244 6245 # Before 2008, GNOME terminal could automatically use the contents of the 6246 # "xterm" terminfo to supply key information which is not built into the 6247 # program. With 2.22.3, this list was built into the program (which addressed 6248 # the inadvertent use of random terminfo data, though using a set of values 6249 # which did not correspond to any that xterm produced - still not solving the 6250 # problem that GNOME terminal hardcoded the $TERM variable as "xterm"). 6251 # 6252 # terminfo modifier code keys 6253 # kf13-kf24 shift 2 F1 to F12 6254 # kf25-kf36 control 5 F1 to F12 6255 # kf37-kf48 shift/control 6 F1 to F12 6256 # kf49-kf60 alt 3 F1 to F12 6257 # kf61-kf63 shift-alt 4 F1 to F3 6258 # 6259 # The parameters with \EO (SS3) are technically an error, since SS3 should have 6260 # no parameters. This appears to be rote copying based on xterm+pcc0. 6261 vte+pcfkeys|VTE's variation on xterm+pcfkeys (building block), 6262 kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, kf16=\EO1;2S, 6263 kf25=\EO1;5P, kf26=\EO1;5Q, kf27=\EO1;5R, kf28=\EO1;5S, 6264 kf37=\EO1;6P, kf38=\EO1;6Q, kf39=\EO1;6R, kf40=\EO1;6S, 6265 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S, 6266 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R, 6267 use=xterm+pcfkeys, 6268 gnome+pcfkeys|GHOME Terminal's variation on xterm+pcfkeys (building block), 6269 use=vte+pcfkeys, 6270 6271 # deprecated - use "vte" for newer versions 6272 gnome|GNOME Terminal, 6273 use=vte-2012, 6274 gnome-256color|GNOME Terminal with xterm 256-colors, 6275 use=xterm+256color, use=gnome, 6276 6277 # relevant changes were made in January 2014, and later. 6278 # 6279 # Originally VTE was promoted as a library able to emulate any terminal by 6280 # reading its terminal description. In practice, that never got beyond the 6281 # ability to read definitions of special keys (function-, editing-, cursor). 6282 # 6283 # Before 2014, VTE had a termcap reader (originally pointing to a private copy 6284 # of a termcap file derived from xterm). That was incomplete because it did 6285 # not have any of the modifier-key information used for xterm's function-, 6286 # editing-, and cursor-keys. Having its own reader was unnecessary since 6287 # ncurses provides that information; used since xterm patch #225 in 2007. 6288 # 6289 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900, 6290 # gnome #730137) dealt with attempts to recast that termcap reader as library 6291 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c), 6292 # abandoning that and finally constructing a table to match xterm's default 6293 # behavior, e.g., for "xterm+pcfkeys". 6294 vte-2014|VTE 0.35.1, 6295 ncv@, 6296 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, 6297 ich=\E[%p1%d@, kent=\EOM, use=ecma+index, 6298 use=oldxterm+sm+1006, use=xterm+pcfkeys, use=vte-2012, 6299 use=bracketed+paste, 6300 6301 # As of January 2018, this was the most recent release, 6302 # e.g., with gnome-terminal 3.26.2 6303 vte-2017|VTE 0.50.2, 6304 use=ecma+strikeout, use=vte-2014, 6305 6306 # VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY 6307 # late in 2017 for changing the appearance of underlines, which was 6308 # incorporated into Debian and Fedora testing-packages in February and March 6309 # 2018, respectively. Overline (Smol/Rmol) has been supported since December 6310 # 2017. 6311 vte-2018|VTE 0.51.2, 6312 AX, 6313 blink=\E[5m, enacs=\E(B\E)0, nel=\EE, 6314 rep=%p1%c\E[%p2%{1}%-%db, 6315 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t; 6316 8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, 6317 Rmol=\E[55m, Se=\E[1 q, Smol=\E[53m, Smulx=\E[4:%p1%dm, 6318 use=xterm+alt+title, use=xterm+tmux, use=kitty+setal, 6319 use=vte-2017, 6320 6321 # Summarizing as of March 2022, these terminfo-capabilities of xterm are 6322 # absent from VTE: 6323 # - DEC application keypad mode 6324 # - DEC-compatible status-line 6325 # - DEC left/right margin support 6326 # - DEC printer controls 6327 # - AT&T cursor-blinking 6328 # - meta mode, as documented in terminfo(5) 6329 # - xterm's extension to clear scrollback 6330 vte|VTE aka GNOME Terminal, 6331 use=vte-2018, 6332 6333 vte-256color|VTE with xterm 256-colors, 6334 use=xterm+256color, use=vte, 6335 6336 # XFCE Terminal 0.2.5.4beta2 6337 # 6338 # This is based on some of the same source code, e.g., the VTE library, as 6339 # gnome-terminal, but has fewer features, fails more screens in vttest. 6340 # Since most of the terminfo-related behavior is due to the VTE library, 6341 # the terminfo is the same as gnome-terminal. 6342 xfce|Xfce Terminal, 6343 use=vte-2008, 6344 6345 # HTERM 6346 # 6347 # https://hterm.org 6348 # 6349 # A terminal written in JavaScript, which can provide xterm-like terminal 6350 # emulation in a browser such as Google Chrome, or in Chome OS. 6351 # 6352 # https://chromium.googlesource.com/apps/libapps/+/master/nassh/doc/FAQ.md 6353 # 6354 # Tested with Secure Shell App version 0.39 in Chrome 89.0.4389.90, found that 6355 # the numeric keypad escapes are missing -TD 6356 hterm|Chromium hterm, 6357 npc, 6358 U8#1, 6359 kcbt=\E[Z, kent=\EOM, nel=\EE, use=linux+kbs, 6360 use=xterm+osc104, use=ecma+index, use=ansi+rep, 6361 use=ecma+strikeout, use=vt420+lrmm, use=xterm+focus, 6362 use=xterm+sm+1006, use=xterm+tmux, use=ecma+italics, 6363 use=xterm+pcfkeys, use=xterm-basic, 6364 use=bracketed+paste, 6365 hterm-256color|Chromium hterm with xterm 256-colors, 6366 use=xterm+256color2, use=hterm, 6367 6368 # TERMITE 6369 # 6370 # https://github.com/thestinger/termite 6371 # 6372 # A review requires install of Arch Linux since Fedora and Debian don't have 6373 # this program. It uses "vte3-ng" (a conflicting package), which is here: 6374 # https://github.com/thestinger/vte-ng 6375 # which (based on the default branch setting) seems to be a fork of vte 6376 # 0.48.2, and is noted as such in Arch: 6377 # https://aur.archlinux.org/packages/vte3-ng/ 6378 # It won't be merged: 6379 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10 6380 # https://bugzilla.gnome.org/show_bug.cgi?id=78291 6381 # but perhaps made obsolete. 6382 # 6383 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and 6384 # was mostly cut/paste from xterm-256color, but since VTE does not actually 6385 # implement several of the features in that terminal description, this one is 6386 # trimmed to eliminate those. Also, since it is a slightly older version of 6387 # VTE, it lacks a few more features (again, trimmed). 6388 termite|VTE-based terminal, 6389 am, km, mir, msgr, npc, xenl, 6390 cols#80, it#8, lines#24, ncv@, 6391 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 6392 yzz{{||}}~~, 6393 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, 6394 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 6395 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 6396 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6397 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 6398 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 6399 ht=^I, hts=\EH, ind=\n, invis=\E[8m, 6400 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z, 6401 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, 6402 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 6403 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, 6404 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| 6405 %t;7%;%?%p7%t;8%;m, 6406 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=, 6407 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, 6408 use=xterm+alt1049, use=ecma+index, use=ansi+idc, 6409 use=ansi+idl, use=ansi+enq, use=ecma+italics, 6410 use=xterm+256color, use=ecma+color, use=vt220+cvis, 6411 use=xterm+pcfkeys, use=xterm+sl-twm, 6412 6413 #### Other GNOME 6414 # Multi-GNOME-Terminal 1.6.2 6415 # 6416 # This does not use VTE, and does have different behavior (compare xfce and 6417 # gnome). 6418 mgt|Multi GNOME Terminal, 6419 use=ecma+index, use=xterm-xf86-v333, 6420 6421 #### KDE 6422 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce 6423 # or not is debatable). 6424 kvt|KDE terminal, 6425 bce, km@, 6426 kdch1=^?, kend=\E[F, khome=\E[H, use=linux+kbs, 6427 use=xterm-color, 6428 6429 # Konsole 1.0.1 (2001/11/25) 6430 # (formerly known as kvt) 6431 # 6432 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to 6433 # simplify this entry (and point out why konsole isn't xterm), we base this on 6434 # xterm-r6. The default keyboard appears to be 'linux'. 6435 # 6436 # Notes: 6437 # a) konsole implements several features from XFree86 xterm, though none of 6438 # that is documented - except of course in its source code - apparently 6439 # because its implementors are unaccustomed to reading documentation - as 6440 # evidenced by the sparse and poorly edited documentation distributed with 6441 # konsole. Some features such as the 1049 private mode are recognized but 6442 # incorrectly implemented as a duplicate of the 47 private mode. 6443 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad 6444 # sends PC-style escapes rather than VT100. 6445 # c) fails vttest menu 3 (Test of character sets) because it does not properly 6446 # parse some control sequences. Also fails vttest Primary Device Attributes 6447 # by sending a bogus code (in the source it says it's supposed to be a 6448 # VT220, which is doubly incorrect because it does not implement VT220 6449 # control sequences except for a few special cases). Treat it as a 6450 # mildly-broken VT102. 6451 # 6452 # Update for konsole 1.3.2: 6453 # The 1049 private mode works (but see the other xterm screens in vttest). 6454 # Primary Device Attributes now returns the code for a VT100 with advanced 6455 # video option. Perhaps that's intended to be a "mildly-broken Vt102". 6456 # 6457 # Updated for konsole 1.6.4: 6458 # add konsole-solaris 6459 # 6460 # Updated for konsole 1.6.6: 6461 # add control-key modifiers for function-keys, etc. 6462 # 6463 # Updated for konsole 2.3 (October 2008): 6464 # vttest menu 1 shows that both konsole and gnome terminal do wrapping 6465 # different from xterm (and VT100's). They have the same behavior in 6466 # this detail, but it is unclear which copies the other. 6467 # 6468 # Deferred update for konsole 2.10 (late 2012): 6469 # add SGR 1006 mouse 6470 # 6471 # Updated for konsole 2.12.4 (late 2013): 6472 # add sitm/ritm 6473 # 6474 # Updated for konsole 16.07 (mid 2016): 6475 # add dim, invis, strikeout 6476 # (also overline, which is too rarely used to provide as an extension) 6477 # 6478 # Updated for konsole 17.12.0 (late 2017): 6479 # 6480 # Re-enable "bel", since it is latent in the source-code even though KDE config 6481 # often hides the feature (2020/5/30) 6482 konsole-base|KDE console window (common), 6483 bce, km@, npc, XT, 6484 ncv@, 6485 blink=\E[5m, dim=\E[2m, ech=\E[%p1%dX, 6486 flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG, 6487 invis=\E[8m, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, 6488 kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, 6489 kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rmam=\E[?7l, 6490 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 6491 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 6492 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 6493 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 6494 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, 6495 use=ecma+index, use=xterm+focus, use=xterm+sm+1006, 6496 use=ecma+strikeout, use=ecma+italics, use=ecma+color, 6497 use=xterm-r6, use=vt220+cvis, use=bracketed+paste, 6498 use=report+version, 6499 6500 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and 6501 # "vt100" key-table files along with a compiled-in default key-table. 6502 # 6503 # The main difference between the two keytabs was that the developer equated 6504 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from 6505 # that. For the same reason, the home/end keys differ. A VT100 had none of 6506 # that. The otherwise identical keytabs have definitions to model the VT52 6507 # cursor-keys and the VT100 cursor-keys with application versus normal modes. 6508 # 6509 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January 6510 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were 6511 # dropped from the install in June 2008. 6512 # 6513 # The default keytab added in January 2000 was originally titled "X11 R6", 6514 # and likewise retitled to "XFree 4". 6515 # 6516 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab 6517 # and changing backspace to ^H, removing that keytab's attempt to model the 6518 # VT100 keypad and VT52 (KDE #20459). 6519 # 6520 # The developers made changes to the default and linux keytabs. Comparing 6521 # the original and 2018 versions using diffstat: 6522 # default: 119 added, 147 deleted, 28 unchanged 6523 # linux: 47 added, 28 deleted, 104 unchanged 6524 # 6525 # Most of the change for the default keytab was to make konsole act more like 6526 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749 6527 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was 6528 # made an external file (like "linux" and "solaris"), and some further 6529 # refinement made. But there are still flaws in the scheme. 6530 # 6531 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for 6532 # Shift into a placeholder in the table entries. That works well if all of the 6533 # modified keys are modified in the same way. But xterm does not do that. The 6534 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad 6535 # keys. For example, F2 sends \EOQ in both terminals because of this feature. 6536 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing: 6537 # kf14: '\E[1;2Q', '\EO2Q'. 6538 # 6539 # In effect, a quarter of konsole's function-keys are different from xterm. 6540 # 6541 # It is not a simple blunder: 6542 # a) xterm patch #121 (November 1999), providing the first version of the 6543 # PC-style modifiers would send \EO2Q 6544 # b) xterm patch #216 (July 2006) amended this and other details, provided 6545 # better documentation for the modifiers and made the behavior configurable, 6546 # e.g., using the modifyFunctionKeys resource. The reason why it sends 6547 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The 6548 # changelog points this out as "avoid sending SS3 with parameters". 6549 # c) That came after AnyMod was introduced, but still early enough that one 6550 # might expect konsole's developers to followup. Twelve years later that 6551 # has yet to happen. 6552 # 6553 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux", 6554 # "solaris"). 6555 konsole-linux|KDE console window with Linux keyboard, 6556 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@, 6557 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@, 6558 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 6559 kf8=\E[19~, kf9=\E[20~, use=konsole-base, 6560 konsole-solaris|KDE console window with Solaris keyboard, 6561 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, 6562 6563 # Obsolete: x11r5.keymap 6564 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm 6565 # terminfo at the time rather than testing the code. 6566 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, 6567 kend=\E[4~, khome=\E[1~, use=konsole-vt100, 6568 6569 # The value for kbs (see konsole-vt100) reflects local customization rather 6570 # than the settings used for XFree86 xterm. 6571 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, 6572 kend=\EOF, khome=\EOH, use=konsole+pcfkeys, 6573 use=konsole-vt100, 6574 6575 konsole+pcfkeys|konsole subset of xterm+pcfkeys, 6576 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0, 6577 use=xterm+pce2, 6578 6579 # Obsolete: vt100.keymap 6580 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but 6581 # it is still useful for deriving the other entries, since the developer 6582 # provided function-keys based on xterm. 6583 konsole-vt100|KDE console window with VT100 (sic) keyboard, 6584 kend=\E[F, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 6585 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, 6586 kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 6587 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 6588 use=konsole-base, 6589 6590 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in 6591 # September 2008 and removed in June 2016. The developer who removed it stated 6592 # that it was never installed. 6593 konsole-vt420pc|KDE console window with VT420 PC keyboard, 6594 kbs=^H, kdch1=^?, use=konsole-vt100, 6595 6596 # make a default entry for konsole 6597 konsole|KDE console window, 6598 use=konsole-xf4x, 6599 6600 # These were written for ncurses: 6601 konsole-16color|klone of xterm-16color, 6602 ncv#32, use=ibm+16color, use=konsole, 6603 konsole-256color|KDE console window with xterm 256-colors, 6604 use=xterm+256setaf, use=konsole, 6605 6606 #### MLTERM 6607 # https://github.com/arakiken/mlterm 6608 6609 mlterm|multi lingual terminal emulator, 6610 use=mlterm3, 6611 6612 # Tested mlterm 3.9.0 (2020/09/19): 6613 # ncurses: 6614 # - has blinking text 6615 # - has italics 6616 # - has invisible-text 6617 # tack: 6618 # - has crossed-out text 6619 # - does not support palette reset with OSC 104 6620 # - testing the function-keys is difficult because the terminal is 6621 # preconfigured to set many of the modified keys to special functions, e.g., 6622 # - shift-F1 and shift-F2 are bound to a split-screen feature 6623 # - control-F1 and control-F2 is bound to a new-terminal feature 6624 # vttest: 6625 # - primary response says it is a VT340 (ReGIS and Sixel). 6626 # - has partial support for double-size characters. 6627 # - character-set tests do not work. 6628 # - DEC locator works. 6629 # - 1006-mouse works. 6630 # - focus-events do not work reliably. 6631 # - numeric keypad escapes do not work. 6632 # - back-color erase works 6633 # other: 6634 # - title-stack works. 6635 # - doesn't respond to 8-bit controls. 6636 # - 256-color palette initializing works. 6637 # - DECSTR soft-reset is documented. 6638 # 6639 # Tested mlterm 3.3.8 (2018/01/21): 6640 # found xterm+sm+1006 did not work with version 3.3.8 6641 # soft-reset DECSTR is in sources since 2017/09/19. 6642 # 6643 # Tested mlterm 3.2.2 (2014/03/22): 6644 # mlterm 3.x made further changes, but they were not reflected in the included 6645 # mlterm.ti (which was dropped in 2015). This entry has been based on testing 6646 # with ncurses, tack and vttest -TD 6647 mlterm3|multi lingual terminal emulator 3.x, 6648 bce, AX, 6649 blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m, 6650 is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>, 6651 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;%? 6652 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 6653 use=ansi+enq, use=ansi+rep, use=ecma+italics, 6654 use=ecma+strikeout, use=xterm+app, use=xterm+pcf2, 6655 use=xterm+pcc2, use=xterm+pce2, use=xterm+meta, 6656 use=xterm+alt+title, use=xterm+sm+1006, 6657 use=vt100+pfkeys, use=bracketed+paste, use=mlterm2, 6658 use=report+version, 6659 6660 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD 6661 # 6662 # It is nominally a VT102 emulator, with features borrowed from rxvt and 6663 # xterm. 6664 # 6665 # The function keys are numbered based on shift/control/alt modifiers, except 6666 # that the control-modifier itself is used to spawn a new copy of mlterm (the 6667 # "-P" option). So control/F1 to control/F12 may not be usable, depending on 6668 # how it is configured. 6669 # 6670 # kf1 to kf12 \E[11~ to \E[24~ 6671 # shift kf1 to kf12 \E[11;2~ to \E[24;2~ 6672 # alt kf1 to kf12 \E[11;3~ to \E[24;3~ 6673 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ 6674 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) 6675 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ 6676 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ 6677 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~ 6678 # 6679 mlterm2|multi lingual terminal emulator 2.x, 6680 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT, 6681 colors#8, cols#80, it#8, lines#24, pairs#64, 6682 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 6683 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, 6684 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 6685 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 6686 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6687 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 6688 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, 6689 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 6690 il=\E[%p1%dL, il1=\E[L, ind=\n, 6691 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?, 6692 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 6693 kend=\EOF, kent=\EOM, khome=\EOH, kind=\EO1;2B, kmous=\E[M, 6694 kri=\EO1;2A, mc0=\E[i, nel=\EE, op=\E[39;49m, rc=\E8, 6695 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 6696 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 6697 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, 6698 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6699 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e 6700 \E(B%;, 6701 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 6702 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 6703 u8=\E[?1;2c, vpa=\E[%i%p1%dd, use=ansi+enq, 6704 use=vt220+vtedit, use=xterm+alt1049, use=ecma+index, 6705 use=mlterm+pcfkeys, use=vt220+cvis, use=xterm+r6f2, 6706 6707 # The insert/delete/home/end keys do not respond to modifiers because mlterm 6708 # looks in its termcap to decide which string to send. If it used terminfo 6709 # (when available), it could use the extended names introduced for xterm. 6710 mlterm+pcfkeys|mlterm fragment for PC-style fkeys, 6711 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, 6712 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B, 6713 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~, 6714 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D, 6715 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~, 6716 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, 6717 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C, 6718 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A, 6719 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A, 6720 6721 mlterm-256color|mlterm 3.0 with xterm 256-colors, 6722 use=xterm+256color, use=mlterm, 6723 6724 #### RXVT 6725 # From: Thomas Dickey <dickey (at] clark.net> 04 Oct 1997 6726 # Updated: Oezguer Kesim <kesim (at] math.fu-berlin.de> 02 Nov 1997 6727 # Notes: 6728 # rxvt 2.21b uses 6729 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, 6730 # but some applications don't work with that. 6731 # It also has an AIX extension 6732 # box2=lqkxjmwuvtn, 6733 # and 6734 # ech=\E[%p1%dX, 6735 # but the latter does not work correctly. 6736 # 6737 # The distributed terminfo says it implements hpa and vpa, but they are not 6738 # implemented correctly, using relative rather than absolute positioning. 6739 # 6740 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. 6741 # Since rxvt is not really compatible with xterm, it should be configured as 6742 # "rxvt" or "rxvt-color". 6743 # 6744 # removed dch/dch1 because they are inconsistent with bce/ech -TD 6745 # remove km as per tack test -TD 6746 rxvt-basic|rxvt terminal base (X Window System), 6747 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT, 6748 cols#80, it#8, lines#24, 6749 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 6750 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 6751 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 6752 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 6753 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6754 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 6755 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H, 6756 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 6757 ind=\n, is1=\E[?47l\E=\E[?1l, 6758 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 6759 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 6760 rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 6761 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 6762 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[? 6763 25h, 6764 s0ds=\E(B, s1ds=\E(0, sc=\E7, 6765 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? 6766 %p9%t\016%e\017%;, 6767 sgr0=\E[0m\017, smacs=^N, smir=\E[4h, smkx=\E=, smso=\E[7m, 6768 smul=\E[4m, tbc=\E[3g, use=xterm+alt47, use=vt100+enq, 6769 use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad, 6770 # Key Codes from rxvt reference: 6771 # 6772 # Note: Shift + F1-F10 generates F11-F20 6773 # 6774 # For the keypad, use Shift to temporarily override Application-Keypad 6775 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock 6776 # is off, escape sequences toggle Application-Keypad setting. 6777 # Also note that values of Home, End, Delete may have been compiled 6778 # differently on your system. 6779 # 6780 # Normal Shift Control Ctrl+Shift 6781 # Tab ^I ESC [ Z ^I ESC [ Z 6782 # BackSpace ^H ^? ^? ^? 6783 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ 6784 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ 6785 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 6786 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ 6787 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ 6788 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ 6789 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ 6790 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ 6791 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 6792 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ 6793 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ 6794 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ 6795 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ 6796 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ 6797 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ 6798 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ 6799 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ 6800 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ 6801 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ 6802 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ 6803 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ 6804 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ 6805 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ 6806 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ 6807 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ 6808 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ 6809 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ 6810 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ 6811 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ 6812 # 6813 # Application 6814 # Up ESC [ A ESC [ a ESC O a ESC O A 6815 # Down ESC [ B ESC [ b ESC O b ESC O B 6816 # Right ESC [ C ESC [ c ESC O c ESC O C 6817 # Left ESC [ D ESC [ d ESC O d ESC O D 6818 # KP_Enter ^M ESC O M 6819 # KP_F1 ESC O P ESC O P 6820 # KP_F2 ESC O Q ESC O Q 6821 # KP_F3 ESC O R ESC O R 6822 # KP_F4 ESC O S ESC O S 6823 # XK_KP_Multiply * ESC O j 6824 # XK_KP_Add + ESC O k 6825 # XK_KP_Separator , ESC O l 6826 # XK_KP_Subtract - ESC O m 6827 # XK_KP_Decimal . ESC O n 6828 # XK_KP_Divide / ESC O o 6829 # XK_KP_0 0 ESC O p 6830 # XK_KP_1 1 ESC O q 6831 # XK_KP_2 2 ESC O r 6832 # XK_KP_3 3 ESC O s 6833 # XK_KP_4 4 ESC O t 6834 # XK_KP_5 5 ESC O u 6835 # XK_KP_6 6 ESC O v 6836 # XK_KP_7 7 ESC O w 6837 # XK_KP_8 8 ESC O x 6838 # XK_KP_9 9 ESC O y 6839 # 6840 # The source-code for rxvt actually defines mappings for F21-F35, using 6841 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys 6842 # are rare, so this entry uses the shift- and control-modifiers as in 6843 # xterm+pcfkeys to define keys past F12. 6844 # 6845 # kIC is normally not used, since rxvt performs a paste for that (shifted 6846 # insert), unless private mode 35 is set. 6847 # 6848 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD 6849 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD 6850 rxvt+pcfkeys|rxvt fragment for PC-style fkeys, 6851 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, 6852 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, 6853 kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, kf1=\E[11~, 6854 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 6855 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 6856 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 6857 kf21=\E[23$, kf22=\E[24$, kf23=\E[11\^, kf24=\E[12\^, 6858 kf25=\E[13\^, kf26=\E[14\^, kf27=\E[15\^, kf28=\E[17\^, 6859 kf29=\E[18\^, kf3=\E[13~, kf30=\E[19\^, kf31=\E[20\^, 6860 kf32=\E[21\^, kf33=\E[23\^, kf34=\E[24\^, kf35=\E[25\^, 6861 kf36=\E[26\^, kf37=\E[28\^, kf38=\E[29\^, kf39=\E[31\^, 6862 kf4=\E[14~, kf40=\E[32\^, kf41=\E[33\^, kf42=\E[34\^, 6863 kf43=\E[23@, kf44=\E[24@, kf5=\E[15~, kf6=\E[17~, 6864 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kind=\E[a, 6865 kri=\E[b, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb, 6866 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@, 6867 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^, 6868 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc, 6869 kUP=\E[a, kUP5=\EOa, use=vt220+vtedit, 6870 6871 # rxvt was originally "xvt", first announced in April 1993: 6872 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html 6873 #------------------------------------------------------------------------------ 6874 # Article: 567 of comp.os.linux.announce 6875 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu! 6876 # caen!batcomputer!theory.TC.Cornell.EDU!mdw 6877 # From: nation (at] rocket.sanders.com (Robert Nation) 6878 # Newsgroups: comp.os.linux.announce 6879 # Subject: xvt upload 6880 # Date: 16 Apr 1993 18:13:07 GMT 6881 # Organization: Cornell Theory Center 6882 # Lines: 13 6883 # Approved: linux-announce (at] tc.cornell.edu (Matt Welsh) 6884 # Message-ID: <1qmsvj$pvj (at] fitz.TC.Cornell.EDU> 6885 # NNTP-Posting-Host: theory.tc.cornell.edu 6886 # Keywords: xvt, xterm, Xwindows 6887 # Originator: mdw (at] theory.TC.Cornell.EDU 6888 # 6889 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and 6890 # rxvt.README on sunsite.unc.edu. 6891 # 6892 # Xvt is an xterm replacement which uses a little less memory, and is 6893 # suitable for use on machines with small memories. Tek4010 support 6894 # is removed. 6895 # 6896 # Modifications were made by Rob Nation (nation (at] rocket.sanders.lockheed.com) 6897 # to make it a little more compact, and to add and remove certain features. 6898 # 6899 # 6900 # -- 6901 # Send submissions for comp.os.linux.announce to: linux-announce (at] tc.cornell.edu 6902 #------------------------------------------------------------------------------ 6903 # 6904 # Though its change-log does not mention this, John Davis has stated that he 6905 # was the author of the changes to use the bce ("new color model") which was 6906 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give 6907 # dates, nor give developer's names. Initial color support was added for rxvt 6908 # "2.0", which was sometime in 1994. 6909 # 6910 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my 6911 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix 6912 # mentioned here 6913 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J 6914 # was from one of my bug-reports -TD 6915 # 6916 # While the color model both for xterm and rxvt was based on Linux console, 6917 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color 6918 # behavior: inserting/deleting characters does not fill the newly empty cell 6919 # with the default background color. 6920 rxvt|rxvt-color|rxvt terminal emulator (X Window System), 6921 ncv@, 6922 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, 6923 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, 6924 rxvt-256color|rxvt 2.7.9 with xterm 256-colors, 6925 use=xterm+256color, use=rxvt, 6926 rxvt-88color|rxvt 2.7.9 with xterm 88-colors, 6927 use=xterm+88color, use=rxvt, 6928 rxvt-xpm|rxvt terminal emulator (X Window System with xpm), 6929 use=rxvt, 6930 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, 6931 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k 6932 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w 6933 \302x\263y\363z\362{\343|\330}\234~\376, 6934 use=rxvt, 6935 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, 6936 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k 6937 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w 6938 \302x\263y\363z\362{\343|\330~\376, 6939 use=rxvt-cygwin, 6940 6941 # This variant is supposed to work with rxvt 2.7.7 when compiled with 6942 # NO_BRIGHTCOLOR defined. rxvt needs more work... 6943 rxvt-16color|rxvt with 16 colors like aixterm, 6944 ncv#32, use=ibm+16color, use=rxvt, 6945 6946 #### MRXVT 6947 # mrxvt 0.5.4 6948 # 6949 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which 6950 # makes its function-keys different from other flavors of rxvt -TD 6951 # 6952 # Testing with tack: 6953 # + made custom description (below) to work, though it sets TERM=xterm. 6954 # 6955 # Testing with vttest: 6956 # + While "based on" rxvt, some of the basic functionality is broken. The 6957 # window collapses to a single line when running several of the screens 6958 # in vttest, e.g., the tests for cursor movement, screen features, 6959 # double-sized characters. 6960 # + The VT52 test works properly, but this is an exception. Due to the 6961 # other bug(s) most of vttest is untestable. 6962 # + the color test using ECH shows a gap in the bce model, like rxvt. 6963 # 6964 # Testing with xterm "vttest" scripts: 6965 # + resize.pl does not work because mrxvt does implement CSI 18 t 6966 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t. 6967 # + none of the "dynamic colors" (OSC colors) scripts work. 6968 mrxvt|multitabbed rxvt, 6969 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B, 6970 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~, 6971 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~, 6972 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~, 6973 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~, 6974 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys, 6975 use=rxvt, 6976 6977 mrxvt-256color|multitabbed rxvt with 256 colors, 6978 use=xterm+256color, use=mrxvt, 6979 6980 #### ETERM 6981 # From: Michael Jennings <mej (at] valinux.com> 6982 # 6983 # Eterm 0.9.3 6984 # 6985 # removed kf0 which conflicts with kf10 -TD 6986 # remove cvvis which conflicts with cnorm -TD 6987 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT 6988 # but does otherwise follow the rxvt+pcfkeys model -TD 6989 # remove nonworking flash -TD 6990 # remove km as per tack test -TD 6991 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), 6992 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT, 6993 btns#5, cols#80, it#8, lines#24, lm#0, ncv@, 6994 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 6995 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 6996 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 6997 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 6998 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6999 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 7000 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 7001 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 7002 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l, 7003 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, 7004 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, 7005 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, 7006 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 7007 rmam=\E[?7l, rmir=\E[4l, rmkx=, rmso=\E[27m, rmul=\E[24m, 7008 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 7009 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[? 7010 25h, 7011 sc=\E7, 7012 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 7013 %;m%?%p9%t\016%e\017%;, 7014 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=, 7015 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, 7016 use=xterm+alt47, use=vt100+enq, use=rxvt+pcfkeys, 7017 use=ecma+color, use=vt220+cvis, 7018 7019 Eterm-256color|Eterm with xterm 256-colors, 7020 use=xterm+256color, use=Eterm, 7021 7022 Eterm-88color|Eterm with 88 colors, 7023 use=xterm+88color, use=Eterm, 7024 7025 #### ATERM 7026 # Based on rxvt 2.4.8, it has a few differences in key bindings 7027 aterm|AfterStep terminal, 7028 XT, 7029 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt, 7030 7031 #### XITERM 7032 # xiterm 0.5-5.2 7033 # This is not based on xterm's source... 7034 # vttest shows several problems with keyboard, cursor-movements. 7035 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm 7036 xiterm|internationalized terminal emulator for X, 7037 km@, use=klone+color, use=xterm-r6, 7038 7039 7040 #### HPTERM 7041 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in 7042 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS 7043 # chars look like --esr) 7044 hpterm|X-hpterm|HP X11 terminal emulator (old), 7045 am, da, db, mir, xhp, xon, 7046 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 7047 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, 7048 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 7049 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 7050 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H, 7051 kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, 7052 khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, krmir=\ER, 7053 ktbc=\E3, meml=\El, memu=\Em, 7054 pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 7055 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 7056 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 7057 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 7058 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 7059 rmul=\E&d@, 7060 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+ 7061 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 7062 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A, 7063 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, 7064 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows, 7065 # HPUX 11 provides a color version. 7066 hpterm-color|HP X11 terminal emulator with color, 7067 ccc, 7068 colors#64, pairs#8, 7069 home=\E&a0y0C, 7070 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, 7071 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, 7072 7073 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90081_198611_Facilities_for_Series_200_300_and_500.pdf 7074 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1987/97089-90081_198709_Facilities_for_Series_200_300_and_500_HP-UX_Concepts_and_Tutorials.pdf 7075 # 7076 # This article does not cover the HP 46020A keyboard that is used by the Model 7077 # 217 and 237 computers. For information on this keyboard read the article, 7078 # "The Series 300 ITE as System Console" found in the manual, HP-UX Concepts 7079 # and Tutorials, Vol. 7. 7080 # 7081 # Possibly: 7082 # http://bitsavers.trailing-edge.com/pdf/hp/9000_hpux/1986/97089-90042_198608_HP-UX_Concepts_and_Tutorials.pdf 7083 # 7084 # HP300_Series_ITE.pdf 7085 # 7086 # This version, which came from Martin Trusler, was tested with lynx using 7087 # ncurses 5.4 7088 hpterm-color2|X-hpterm-color2|HP X11 terminal emulator with color (new), 7089 OTbs, am, ccc, da, db, km, mir, xhp, 7090 colors#8, cols#80, it#8, lh#2, lines#24, lm#0, lw#8, nlab#8, 7091 pairs#8, xmc#0, 7092 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+ 7093 u+v+w+x|y<z>{*|!}\273~\362, 7094 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, 7095 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 7096 dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 7097 home=\E&a0y0C, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, 7098 ind=\ES, 7099 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e. 7100 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1 7101 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%= 7102 %t1%e.%p7%d%;z%p1%dI, 7103 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, 7104 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, 7105 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 7106 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5 7107 I\E&v1b1c6I\E&v1x1y7I, 7108 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 7109 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 7110 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 7111 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 7112 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A, 7113 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE, 7114 scp=\E&v%p1%dS, 7115 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%p5%{8}%*%+%{64}%+%c%? 7116 %p9%t%'\016'%c%e%'\017'%c%;, 7117 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A, 7118 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB, 7119 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, use=hp+pfk-cr, 7120 use=hp+arrows, 7121 #### EMU 7122 # This is for the extensible terminal emulator on the X11R6 contrib tape. 7123 # It corresponds to emu's internal emulation: 7124 # emu -term emu 7125 # emu's default sets TERM to "xterm", but that doesn't work well -TD 7126 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD 7127 # fixes: add civis, cnorm, sgr -TD 7128 emu|emu native mode, 7129 am, bce, mir, msgr, xon, 7130 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 7131 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s 7132 \224t\225u\226v\227w\230x\231~\244, 7133 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, 7134 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, 7135 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC, 7136 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, 7137 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, 7138 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, 7139 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, 7140 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, 7141 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01, 7142 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, 7143 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, 7144 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, 7145 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, 7146 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, 7147 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, 7148 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, 7149 setaf=\Er%i%p1%d;, 7150 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6 7151 %t\EU%;, 7152 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, 7153 7154 # VT220 terminfo entry for the Emu emulation, corresponds to 7155 # emu -term vt220 7156 # with NumLock set (to make the keypad transmit kf0-kf9). 7157 # fixes: add am, xenl, corrected sgr0 -TD 7158 emu-220|Emu-220 (vt200-7bit mode), 7159 am, xenl, xon, 7160 cols#80, it#8, lines#24, vt#200, 7161 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 7162 blink=\E[0;5m, bold=\E[0;1m, clear=\E[2J\E[H, cr=\r, 7163 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 7164 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 7165 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 7166 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, 7167 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 7168 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, 7169 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, 7170 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 7171 kcuu1=\E[A, kent=\EOM, kf0=\EOp, kf1=\EOq, kf10=\EOl, 7172 kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, kf15=\EOR, 7173 kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, kf28=\E[19~, 7174 kf29=\E[20~, kf3=\EOs, kf30=\E[21~, kf34=\E[26~, 7175 kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, kf4=\EOt, 7176 kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, 7177 kf9=\EOy, khlp=\E[28~, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, 7178 rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, 7179 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, 7180 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t; 7181 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 7182 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, 7183 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, use=vt220+vtedit, 7184 use=vt220+cvis, 7185 7186 #### MVTERM 7187 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, 7188 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings 7189 # indicate that it emulates more than one terminal, but incompletely. 7190 # 7191 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy (at] pacbell.net> 7192 # It is based on vt102's entry, with some subtle differences, but also 7193 # has status line 7194 # supports ANSI colors (except for 'op' string) 7195 # apparently implements alternate screen like xterm 7196 # does not use padding, of course. 7197 mvterm|vv100|SwitchTerm aka mvTERM, 7198 am, km, mir, msgr, xenl, xon, 7199 colors#8, cols#80, it#8, lines#24, pairs#64, 7200 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7201 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 7202 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 7203 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 7204 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 7205 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 7206 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, 7207 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 7208 ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 7209 kcuu1=\EOA, op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 7210 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 7211 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, 7212 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 7213 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 7214 %;m%?%p9%t\016%e\017%;, 7215 sgr0=\E[m\017, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, 7216 smul=\E[4m, tbc=\E[3g, use=xterm+alt47, use=vt100+fnkeys, 7217 use=x10term+sl, 7218 7219 #### MTERM 7220 # 7221 # This application is available by email from <mouse (at] Rodents.Montreal.QC.CA>. 7222 # 7223 # "mterm -type ansi" sets $TERM to "ansi" 7224 mterm-ansi|ANSI emulation, 7225 am, bw, mir, msgr, 7226 it#8, 7227 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7228 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 7229 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 7230 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 7231 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 7232 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 7233 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, 7234 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m, 7235 is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rmacs=^O, 7236 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 7237 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 7238 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 7239 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m, 7240 smul=\E[4m, vpa=\E[%i%p1%dd, use=ecma+index, 7241 # mterm normally sets $TERM to "mterm" 7242 mterm|mouse-sun|Der Mouse term, 7243 am, bw, mir, 7244 it#8, 7245 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S, 7246 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, 7247 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W, 7248 rmir=^O, rmso=^T, smir=^Q, smso=^V, 7249 # "mterm -type decansi" sets $TERM to "decansi" 7250 # 7251 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD 7252 decansi|ANSI emulation with DEC compatibility hacks, 7253 am, mir, msgr, xenl, 7254 colors#8, it#8, pairs#64, 7255 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7256 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 7257 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 7258 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 7259 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 7260 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 7261 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, 7262 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, 7263 il1=\E[L, ind=\E[S, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H, 7264 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\E[11~, 7265 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 7266 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 7267 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 7268 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 7269 kf8=\E[19~, kf9=\E[20~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, 7270 ri=\E[T, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 7271 rmso=\E[27m, rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm, 7272 setaf=\E[3%p1%dm, 7273 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 7274 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 7275 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 7276 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 7277 use=ansi+cpr, use=vt220+vtedit, use=ecma+index, 7278 use=vt220+cvis, 7279 7280 #### VWM 7281 # http://vwm.sourceforge.net/ 7282 # 7283 # VWM 2.0.2 (2009-05-01) 7284 # vwmterm is a terminal emulator written for the VWM console window manager. 7285 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23). 7286 vwmterm|VWM terminal, 7287 am, bce, ccc, mir, msgr, npc, xenl, xon, 7288 colors#8, pairs#64, 7289 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7290 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 7291 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 7292 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 7293 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, 7294 ed=\E[J, el=\E[K, home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, 7295 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 7296 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 7297 kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 7298 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 7299 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m, 7300 rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm, 7301 setaf=\E[3%p1%dm, 7302 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 7303 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 7304 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m, 7305 smul=\E[4m, use=vt220+cvis, use=xterm+alt1049, 7306 7307 #### MGR 7308 # 7309 # MGR is a Bell Labs window system lighter-weight than X. 7310 # These entries describe MGR's xterm-equivalent. 7311 # They are courtesy of Vincent Broman <broman (at] nosc.mil> 14 Jan 1997 7312 # 7313 7314 mgr|Bellcore MGR (non X) window system terminal emulation, 7315 am, km, xon, 7316 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r, 7317 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, 7318 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, 7319 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, 7320 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, 7321 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, 7322 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B, 7323 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S, 7324 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, 7325 smul=\E4n, 7326 mgr-sun|Mgr window with Sun keyboard, 7327 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, 7328 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, 7329 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, 7330 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, 7331 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 7332 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, 7333 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, 7334 mgr-linux|Mgr window with Linux keyboard, 7335 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, 7336 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, 7337 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 7338 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 7339 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, 7340 7341 #### SIMPLETERM 7342 # st.suckless.org 7343 7344 st|stterm|aka simpleterm, 7345 use=st-0.8, 7346 7347 # Reviewed 0.8.2: 7348 # In tack, 7349 # there is some problem turning off line-drawing 7350 # shift+control function-keys do nothing; shift+control cursor keys work 7351 # the padding tests make the terminal non-functional. 7352 # In vttest, 7353 # SD/SU work 7354 # SL/SR/REP do not work 7355 # ECMA-48 cursor movement works, e.g., CHA, CBT, etc. 7356 # 7357 # This entry discards the ccc/initc capabilities from st-0.7 because they 7358 # belong in st-256color. 7359 st-0.8|simpleterm 0.8, 7360 kcbt@, kent@, oc=\E]104\007, Ms=\E]52;%p1%s;%p2%s\007, 7361 kDN3=\E[1;3B, kDN5=\E[1;5B, kLFT3=\E[1;3D, kLFT5=\E[1;5D, 7362 kNXT3=\E[6;3~, kNXT5=\E[6;5~, kPRV3=\E[5;3~, 7363 kPRV5=\E[5;5~, kRIT3=\E[1;3C, kRIT5=\E[1;5C, 7364 kUP3=\E[1;3A, kUP5=\E[1;5A, use=ecma+strikeout, 7365 use=st-0.6, 7366 7367 # Reviewed 0.7: 7368 # dim is intermittent, sometimes works, sometimes does not 7369 # italics may show up with yellow color 7370 # has control cursor-keys, alt cursor-keys, still no combinations 7371 # has control pageup/down 7372 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1) 7373 # Se and Ss are implemented in the source-code, but the terminfo 7374 # provided with the source is incorrect, since Se/Ss are mis-coded 7375 # as booleans rather than strings. 7376 st-0.7|simpleterm 0.7, 7377 ccc, 7378 initc=\E]4;%p1%d;rgb:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%* 7379 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 7380 kcbt@, kent@, oc=\E]104\007, Ms=\E]52;%p1%s;%p2%s\007, 7381 kDN3=\E[1;3B, kDN5=\E[1;5B, kLFT3=\E[1;3D, kLFT5=\E[1;5D, 7382 kNXT3=\E[6;3~, kNXT5=\E[6;5~, kPRV3=\E[5;3~, 7383 kPRV5=\E[5;5~, kRIT3=\E[1;3C, kRIT5=\E[1;5C, 7384 kUP3=\E[1;3A, kUP5=\E[1;5A, use=ecma+strikeout, 7385 use=st-0.6, 7386 7387 # st-0.4.1 7388 # 7389 # This version uses a table which supports a single modifier (a subset of 7390 # xterm's keys, using the same scheme). Because it supports only a single 7391 # modifier in this table, function keys f36-f48 are normally unavailable 7392 # because they are assigned to modifier-4. 7393 # 7394 # The program assigns TERM to match the program name (the upstream source says 7395 # "st", but Debian renames it to "stterm"). 7396 # 7397 # The source includes two entries which are not useful here: 7398 # st-meta| simpleterm with meta key, 7399 # st-meta-256color| simpleterm with meta key and 256 colors, 7400 # because st's notion of "meta" does not correspond to the terminfo definition. 7401 # Rather, it acts like xterm - when the meta feature is disabled. 7402 # 7403 # Removed invis -TD 7404 # Added eo, removed ul -TD 7405 # 7406 # Reviewed st 0.5: 7407 # implements control-modifier, but not control-shift for special keys 7408 # implements alt-modifier, but not alt-shift for special keys 7409 # 7410 # Reviewed st 0.6: 7411 # http://git.suckless.org/st/log/st.info 7412 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1) 7413 # still has no function keys past kf36 (no combinations of modifiers) 7414 # no application keypad mode, e.g, kent. 7415 st-0.6|simpleterm 0.6, 7416 am, bce, mir, msgr, npc, xenl, XT, 7417 colors#8, cols#80, it#8, lines#24, pairs#64, 7418 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy 7419 zz{{||}}~~, 7420 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, 7421 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 7422 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 7423 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 7424 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 7425 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 7426 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H, 7427 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 7428 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, 7429 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F, 7430 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~, 7431 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu, 7432 kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~, 7433 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 7434 kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F, kent=\EOM, 7435 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 7436 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, 7437 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 7438 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 7439 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, 7440 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, 7441 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 7442 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 7443 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, 7444 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, 7445 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 7446 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, 7447 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, 7448 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, 7449 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, 7450 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, 7451 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, 7452 kf8=\E[19~, kf9=\E[20~, kil1=\E[2;5~, kind=\E[1;2B, 7453 kmous=\E[M, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, 7454 mc4=\E[4i, mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, 7455 ri=\EM, rmacs=\E(B, rmir=\E[4l, rmkx=\E[?1l\E>, 7456 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, 7457 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 7458 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 7459 %=%t3%e%p1%d%;m, 7460 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 7461 %=%t3%e%p1%d%;m, 7462 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| 7463 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m, 7464 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=, 7465 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u8=\E[?1;2c, 7466 vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=ansi+enq, 7467 use=vt220+pcedit, use=ecma+index, use=xterm+alt1049, 7468 use=vt220+cvis, use=xterm+sl, use=ecma+italics, 7469 use=ecma+strikeout, use=bracketed+paste, 7470 # 7471 # st-0.1.1 7472 # 7473 # Note: the original terminfo description uses leading blank to persuade 7474 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an 7475 # alias. 7476 # 7477 # Reading the code shows it should work for aixterm 16-colors 7478 # - added st-16color 7479 # 7480 # Using tack: 7481 # - set eo (erase-overstrike) 7482 # - set xenl 7483 # - tbc doesn't work 7484 # - hts works 7485 # - cbt doesn't work 7486 # - shifted cursor-keys send sequences like rxvt 7487 # - sgr referred to unimplemented "invis" mode. 7488 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis 7489 simpleterm|old-st|simpleterm 0.1.1, 7490 am, eo, mir, msgr, ul, xenl, 7491 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 7492 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7493 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 7494 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud=\E[%p1%dB, cud1=\n, 7495 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 7496 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 7497 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG, 7498 ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?, 7499 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 7500 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 7501 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 7502 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 7503 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8, 7504 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7, 7505 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 7506 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| 7507 %t;7%;m, 7508 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m, 7509 use=vt220+cvis, use=ecma+index, 7510 st-16color|stterm-16color|simpleterm with 16-colors, 7511 use=ibm+16color, use=st, 7512 # Tested with st 0.8.2 7513 # The issue with the titlebar is fixed, though st is very slow. 7514 # In st 0.7, 256 colors "works", but when running xterm's test-scripts, some 7515 # garbage is shown in the titlebar. 7516 # 7517 # terminal wants to use TERM=stterm-256color, but that is longer than 14 7518 # characters, making the choice nonportable. 7519 st-256color|stterm-256color|simpleterm with 256 colors, 7520 use=xterm+256color, use=st, 7521 7522 #### TERMINATOR 7523 # https://github.com/software-jessies-org/jessies/wiki/Terminator 7524 # 7525 # Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit 7526 # Debian/current -TD (2011/8/20) 7527 # 7528 # There were some packaging problems: 7529 # a) using Java, the program starts off using 50Mb, and climbs from there, 7530 # up to 114Mb after testing (no scrollback). 7531 # b) it insists on reinstalling its terminal description in $HOME/.terminfo 7532 # (two copies, just in case the host happens to be Mac OS X). 7533 # I deleted this after testing with tack. 7534 # 7535 # Issues/features found with tack: 7536 # a) tbc does not work (implying that hts also is broken). 7537 # Comparing with the tabs utility shows a problem with the last tabstop on 7538 # a line. 7539 # b) has xterm-style shifted function-key strings 7540 # meta also is used, but control is ignored. 7541 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, 7542 # meta) 7543 # d) some combinations of shift/control send xterm-style sequences for 7544 # insert/delete/home/end. 7545 # e) numeric keypad sends only numbers (compare with vttest). 7546 # f) meta mode (km) is not implemented. 7547 # 7548 # Issues found with ncurses test-program: 7549 # a) bce is inconsistently implemented 7550 # b) widths of Unicode values above 256 do not always agree with wcwidth. 7551 # 7552 # Checked with vttest, found low degree of compatibility there. 7553 # 7554 # Checked with xterm's scripts, found that the 256-color palette is fixed. 7555 # 7556 # Fixes: 7557 # a) add sgr string 7558 # b) corrected sgr0 to reset alternate character set 7559 # c) modified smacs/rmacs to use SCS rather than SI/SO 7560 # d) removed bce 7561 # e) removed km 7562 # 7563 # Revisiting in May 2019, the Debian package was no longer available, and a 7564 # developer-provided ".deb" does not work. However, a usable Windows ".msi" 7565 # (which relies upon Cygwin) can be tested. The developers provide a terminfo, 7566 # but some of the features it lists do not work reliably (bce, italics, invis). 7567 # 7568 # tack: 7569 # tbc fails 7570 # invis attribute fails 7571 # key-definitions could be expanded, with some work: 7572 # + supports xterm-style cursor key-modifiers for shift 7573 # + supports xterm-style function key-modifiers for shift,control,alt 7574 # + supports xterm-style editing key-modifiers for shift,control,alt 7575 # (kbs=^?) 7576 # ncurses test-program: 7577 # "C" menu shows that bce implementation is incomplete 7578 # italics did not work 7579 # dim worked once in tack, but not in ncurses test-program 7580 # "F" thick-line characters do not display 7581 # vttest: 7582 # terminal does not respond to 80/132-column switching 7583 # wrapping at the right margin is erratic 7584 # there are several problems in the cursor-movements and screen-features 7585 # no VT52, no double-sized characters 7586 # Device attributes response says it is a vanilla VT100 7587 # does not respond to xterm mouse controls 7588 # alternate screen tests do not fill the screen, return wrong position 7589 # window modify/report operations do not work 7590 # miscellaneous ISO-6429 tests, e.g., REP, do not work 7591 # CBT, CHT, HPR, CNL,CPL, VPR do not work 7592 # 7593 # removed the cancel for "hs", removed cbt, invis, corrected sgr -TD 7594 # use xterm+256setaf, etc -TD 7595 terminator|Terminator no line wrap, 7596 bce, eo, mir, msgr, xenl, xon, 7597 cols#80, it#8, lines#24, lm#0, 7598 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7599 bold=\E[1m, clear=\E[H\E[2J, cr=\r, 7600 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 7601 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 7602 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 7603 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 7604 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 7605 flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 7606 il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l, 7607 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?, 7608 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 7609 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 7610 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, 7611 kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 7612 kf9=\E[20~, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, 7613 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 7614 rs2=\E[!p\E[?3;4l\E[4l\E>, s0ds=\E(B, s1ds=\E(0, sc=\E7, 7615 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7 7616 %;m%?%p9%t\E(0%e\E(B%;, 7617 sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m, 7618 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+enq, 7619 use=vt220+pcedit, use=ecma+italics, use=ecma+index, 7620 use=xterm+256setaf, use=xterm+sl-twm, 7621 use=xterm+alt1049, use=vt220+cvis, use=bracketed+paste, 7622 7623 #### TERMINOLOGY 7624 # https://www.enlightenment.org/about-terminology 7625 # https://github.com/borisfaure/terminology 7626 # 7627 # 2014/10/14: 7628 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a VT100 7629 # emulator, nor is it compatible with xterm, but it uses a few features from 7630 # both -TD 7631 # 7632 # General comments: 7633 # cursor does not fill on focus 7634 # there are pervasive problems with clearing/erasing parts of the screen 7635 # resizing the window causes it to stop listening to the keyboard 7636 # tack - 7637 # doesn't understand VT100 CPR needed for resize 7638 # no CBT 7639 # no cvvis 7640 # has invis 7641 # no blink 7642 # uses bce model for colors, but (see below) fails the vttest screens 7643 # has partial support for 256color feature. 7644 # tack function-keys (a subset of xterm+pcf0), and 7645 # tack cursor-keys (a subset of xterm+pce2): 7646 # ctrl+shift (ignored) 7647 # 2 shift 7648 # shift-alt modifier -> shift (2) 7649 # 3 alt 7650 # 4 7651 # 5 ctrl 7652 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1 7653 # ctrl + khome/kend works - none of the other modifiers do 7654 # vttest - 7655 # spits lots of messages from termptyesc.c especially in vttest. 7656 # no 132-column mode 7657 # fails menu 1, 2 (definitely not VT100-compatible) 7658 # primary (claims VT420 with several options, apparently none work) and 7659 # secondary report says (perhaps... VT420): \E[>41;285;0c 7660 # CHA, HPR, VPA, CNL, CPL work 7661 # BCE with ED/EL - fail 7662 # BCE with ECH/indexing - fail 7663 # SD/SU work 7664 # unlike teken, background light/dark works 7665 # can set title 7666 # X10 and Normal mouse work 7667 # Any-event mouse works 7668 # Mouse button-event works 7669 # 7670 # This description uses xterm+pcf0, which is misleading because the program 7671 # does not handle combinations of modifiers - but listing them all would 7672 # involve more effort than its developers spent -TD 7673 terminology-0.6.1|EFL-based terminal emulator (0.6.1), 7674 mc5i@, 7675 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D, 7676 kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, 7677 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8 7678 %;m%?%p9%t\016%e\017%;$<2>, 7679 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~, 7680 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B, 7681 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B, 7682 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H, 7683 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D, 7684 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C, 7685 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C, 7686 kRIT7=\E[1;7C, kUP=\E[1;2A, use=ansi+enq, use=xterm+pcf0, 7687 use=vt100, use=xterm+256setaf, 7688 7689 # 2017-11-11: 7690 # Tested terminology 1.0.0 7691 # 7692 # tack - 7693 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift 7694 # and control+alt were added like xterm+pcc2 7695 # Editing keys have some features from xterm+pce2 7696 # Changed from xterm+pcf0 to xterm+pcf2 7697 # 7698 # vttest - 7699 # REP, SL, SR fail 7700 # 7701 # Aside from the partial fixes for function/cursor/editing keys, no improvement 7702 # in other tests versus 0.6.1 7703 terminology-1.0.0|EFL-based terminal emulator (1.0.0), 7704 dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, 7705 khome=\E[OH, rmacs=\E(B, 7706 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%; 7707 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>, 7708 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics, 7709 use=vt220+cvis, use=xterm+x11mouse, use=xterm+pce2, 7710 use=xterm+pcf2, use=xterm+pcc2, use=bracketed+paste, 7711 use=terminology-0.6.1, 7712 7713 # 2020/12/26: 7714 # Tested terminology 1.8.1 using tack and vttest. 7715 # tack - 7716 # flash does not work 7717 # italics and crossed-out text work 7718 # no meta mode 7719 # vttest - 7720 # DA1 says this is a VT420 with with 132 columns, NRCS, horizontal scrolling 7721 # DA2 says this is a VT510, version 33.7 7722 # NRCS does not work, program hangs in the locking shift test. 7723 # some of the VT420 rectangle operations work 7724 # left/right margins do not work 7725 # most of DECSCUSR works 7726 # most problems with bce are fixed. 7727 terminology-1.8.1|EFL-based terminal emulator (1.8.1), 7728 km@, 7729 cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@, 7730 use=linux+kbs, use=ecma+index, use=xterm+256setaf, 7731 use=ansi+rep, use=ecma+strikeout, use=xterm+focus, 7732 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux, 7733 use=vt220+cvis, use=ecma+italics, use=xterm-basic, 7734 use=report+version, 7735 7736 terminology|EFL-based terminal emulator, 7737 use=terminology-1.8.1, 7738 7739 ######## OPENGL CLIENTS 7740 7741 #### Alacritty 7742 # https://github.com/jwilm/alacritty 7743 # Version 0.6.0 (2020/11/25) 7744 # Version 0.4.0 (2019/11/25) 7745 # Version 0.3.3 (2019/08/03) 7746 # Version 0.2.1 (2018/10/03) 7747 # Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X 7748 # terminal programs) is not designed to run with a remote server. 7749 # 7750 # Packaged in Arch Linux - 7751 # vttest: 7752 # initial screensize 24x80 7753 # no DECCOLM (does not switch between 80/132 columns) 7754 # otherwise, passes wrapping test 7755 # no DECSCNM 7756 # identifies as a VT102 7757 # numeric keypad does not send expected codes (seen in 0.4.0) 7758 # passes bce test 7759 # vt220: 7760 # ECH works in 0.3.3 (0.2.1 left text on right margin) 7761 # no SRM, DECSCA 7762 # vt320: 7763 # fails DECXCPR 7764 # does not implement any of the DECRQM/DECRPM controls 7765 # does not implement any of the DECRQSS controls 7766 # vt420: 7767 # no DECLRMM 7768 # no DECBI, DECFI 7769 # other: 7770 # fails CHT, otherwise ECMA-48 cursor movement ok 7771 # fails ERM/SPA, SL, SR, passes REP, SD, SU 7772 # xterm: 7773 # no X10 mouse 7774 # has normal and highlight mouse 7775 # has any-event and button-event mouse 7776 # + does support SGR-mouse 7777 # + does not correctly support focus in/out events (seen in 0.4.0) 7778 # cursor-position wrong after alternate-screen (fixed in 0.4.0) 7779 # none of the dtterm controls work 7780 # tack: 7781 # bell and flash do not work 7782 # blink does not work 7783 # italics and crossed-out work (latter did not work in 0.2.1) 7784 # function-keys work up (tested combinations which window manager allows) 7785 # treats meta as escape-prefix 7786 # 7787 # The program sources include "alacritty" and "alacritty-direct", which are 7788 # copied from "xterm-256color" and "xterm-direct" (but using semicolon for 7789 # subparameter delimiter). Refactored here to use ncurses building blocks -TD 7790 alacritty|alacritty terminal emulator, 7791 rs1=\Ec\E]104\007, use=xterm+256color, 7792 use=alacritty+common, 7793 7794 alacritty-direct|alacritty with direct color indexing, 7795 use=xterm+indirect, use=alacritty+common, 7796 7797 # cancel km, since it is not actually meta mode -TD 7798 # added ecma+strikeout in 0.3.3 -TD 7799 # added xterm+sl-twm in 0.3.3 -TD 7800 alacritty+common|base fragment for alacritty, 7801 km@, npc, 7802 kb2=\EOE, kcbt=\E[Z, kent=\EOM, Se=\E[0 q, 7803 Smulx=\E[4:%p1%dm, use=ecma+index, use=xterm+focus, 7804 use=xterm+sm+1006, use=xterm-basic, use=xterm+app, 7805 use=ansi+rep, use=xterm+tmux, use=ecma+strikeout, 7806 use=xterm+sl-twm, use=ecma+italics, use=xterm+pce2, 7807 use=xterm+pcc2, use=xterm+pcf2, use=bracketed+paste, 7808 7809 #### Kitty 7810 # https://github.com/kovidgoyal/kitty 7811 # Project started in 2016/10 (see alacritty), but is a Python script rather 7812 # than Rust, using OpenGL. The same caveats regarding remote connections 7813 # apply. This is not an X terminal, though (like alacritty), it copies 7814 # features from xterm. 7815 # 7816 # Regarding the name "kitty", that is a pun, reflected in the description. 7817 # But see 7818 # http://www.9bis.net/kitty/ 7819 # https://github.com/kovidgoyal/kitty/issues/9 7820 # https://github.com/kovidgoyal/kitty/issues/1025 7821 # and 7822 # http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html 7823 # https://github.com/kovidgoyal/kitty/issues/879 7824 # 7825 # Version 0.21.2 (June 28, 2021) 7826 # changes since 0.19.1 7827 # Notes: 7828 # Repeatable tests with tack and vttest assume a standard screensize -- 7829 # measured in characters. However, kitty uses pixel-measurements and 7830 # does not readily use characters. 7831 # Resizing with twm shows only pixel-based hint rather than characters 7832 # manual page states that it is possible to override initial window size, 7833 # but configuration file has no effect on initial window size. 7834 # The same problem with XFCE4, but editing the cached json file works 7835 # for setting the window size (the "c" suffix for cells does not): 7836 # {"window-size": [720, 440]} 7837 # though the values depend upon the font in use. 7838 # vttest 7839 # tack 7840 # flash works 7841 # invisible text still does not work 7842 # function/special key modifiers finally work 7843 # 7844 # Version 0.19.1 (October 6, 2020) 7845 # changes since 0.13.3: 7846 # vttest 7847 # ISO-6429 7848 # REP works, though using unspecified behavior 7849 # xterm 7850 # xterm's SGR-mouse mode is recognized. 7851 # does recognize original alternate-screen 7852 # bug: mouse focus in/out does not work. 7853 # bug: X10 mouse mode responds like any-event 7854 # bug: highlight-tracking does not work; terminal hangs. 7855 # 7856 # tack 7857 # rs1 adds an empty string for resetting title- and other OSC-strings. 7858 # italics work 7859 # 7860 # Version 0.13.3 (January 19, 2019) 7861 # Notes: 7862 # initial screensize 71x22 7863 # does not respond to "resize -s" 7864 # resizing with window manager gives no clues 7865 # vttest 7866 # does not switch between 80/132 columns 7867 # fails wrapping test, copying vte/rxvt 7868 # no reverse-background, no blink 7869 # claims to be VT200: 7870 # primary \E[?62;c 7871 # secondary \E[>1;4000;12c 7872 # however - 7873 # no GR in the locking-shifts screen 7874 # no NRCS or ISO-2022, anyway 7875 # no VT52 7876 # VT220: 7877 # has DECTCEM, ECH, but no SRM and DECSCA 7878 # has operating condition report, none of the others 7879 # VT320: 7880 # has SU/SD 7881 # DECRQSS ok for DECSTBM, SGR, none of the others 7882 # no status-line 7883 # VT420: 7884 # DECXCPR device status works, none of the others 7885 # no left/right margins 7886 # has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA 7887 # inside of DECCARA is uncolored 7888 # line-drawing with DECCARA does not work 7889 # aside from left/right margins, editing sequences look ok 7890 # no DECFI, DECBI 7891 # color: 7892 # fails ECH test for bce 7893 # ISO-6429 7894 # fails REP, SL, SL, but other cursor-movement ok 7895 # xterm: 7896 # does not recognize original alternate-screen 7897 # cursor-position wrong after alternate-screen 7898 # has normal mouse, any-event, any-button, but 7899 # no X10 mouse 7900 # no mouse-highlight tracking 7901 # no DEC locator 7902 # dtterm - only supports report-size chars/pixels 7903 # recognizes tcap-query 7904 # tack: 7905 # flash doesn't work 7906 # italics do not work 7907 # bce should be set (but see vttest) 7908 #* developer's terminfo stopped at kf25, but the program continues, 7909 # copying xterm for the rest of the control+fkey sequence 7910 # (but only one modifier is supported, like iTerm2). 7911 #* it omitted shifted pageup/down 7912 #* control+editing keys work 7913 # In contrast to function-keys, some additional modifier combinations 7914 # act like xterm for the editing/cursor-keys, e.g., alt+shift. While 7915 # the implementation is incomplete, the building-blocks are consistent 7916 # with what has been implemented -TD 7917 # DECKPAM does not work -TD 7918 #* ka1, ka3, kc1, kc3 were bogus (removed) 7919 #* meta sends escape (removed kmm) -TD 7920 #* cvvis does not make cursor "more visible" -TD 7921 kitty|KovId's TTY, 7922 use=xterm+256color, use=kitty+common, 7923 kitty-direct|KovId's TTY using direct colors, 7924 oc=\E]104\007, use=xterm+direct2, use=kitty+common, 7925 kitty+common|KovId's TTY common properties, 7926 am, mc5i, mir, msgr, npc, xenl, 7927 cols#80, it#8, lines#24, 7928 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 7929 yzz{{||}}~~, 7930 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, 7931 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 7932 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 7933 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 7934 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 7935 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 7936 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 7937 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 7938 ind=\n, kBEG=\E[1;2E, kbeg=\EOE, kbs=^?, kcbt=\E[Z, 7939 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, 7940 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l, rmso=\E[27m, 7941 rmul=\E[24m, rs1=\E]\E\\\Ec, sc=\E7, 7942 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%; 7943 %?%p1%p3%|%t;7%;m, 7944 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 7945 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 7946 vpa=\E[%i%p1%dd, Smulx=\E[4:%p1%dm, use=ansi+enq, 7947 use=ansi+rep, use=xterm+focus, use=xterm+sm+1006, 7948 use=ecma+index, use=xterm+pcfkeys, use=xterm+sl-twm, 7949 use=ecma+strikeout, use=ecma+italics, 7950 use=xterm+alt1049, use=att610+cvis, use=xterm+tmux, 7951 use=bracketed+paste, use=report+version, 7952 7953 kitty+setal|set underline colors (nonstandard), 7954 setal=\E[58:2::%p1%{65536}%/%d:%p1%{256}%/%{255}%&%d:%p1 7955 %{255}%&%dm, 7956 7957 ######## WAYLAND CLIENTS 7958 7959 #### Foot 7960 # https://codeberg.org/dnkl/foot/ 7961 # Version 1.8.2 7962 # 7963 # This identifies as a VT220 with 4=sixel and 22=color, however: 7964 # tack: 7965 # bell does not work 7966 # status-line does not work because foot does not set the window title 7967 # sends escape when meta key is used, whether or not smm/rmm enabled 7968 # vttest: 7969 # wrap-test fails 7970 # no application-mode for numeric keypad (unless private mode 1035 is set) 7971 # no NRCS 7972 # no VT52 7973 # no SRM 7974 # protected areas do not work 7975 # SU/SD work, SL/SR do not 7976 # DECRPM responds, but not the corresponding ANSI reports. 7977 # otherwise few reports, except cursor-position and mouse and some dtterm 7978 # VT520 cursor-movement works, except for left/right margins 7979 # supports xterm/DECSCUSR, though default case in vttest does not blink 7980 # Send: <27> [ 0 <32> q 7981 # Text: The cursor should be a blinking rectangle 7982 # partial support for xterm mouse any-event mode and button-event mode: 7983 # + does not report focus-in/focus-out 7984 # + does not report buttons 6/7 7985 # alternate-screen works 7986 foot|foot terminal emulator, 7987 oc=\E]104\E\\, use=xterm+256color2, use=foot+base, 7988 7989 foot-direct|foot with direct color indexing, 7990 use=xterm+direct, use=foot+base, 7991 7992 foot+base|foot base fragment, 7993 am, bce, bw, mir, msgr, npc, xenl, AX, XT, 7994 cols#80, it#8, lines#24, 7995 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 7996 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 7997 cub1=^H, cud1=\n, dim=\E[2m, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 7998 el1=\E[1K, flash=\E]555\E\\, ind=\n, invis=\E[8m, 7999 is2=\E[!p\E[4l\E>, kbs=^?, kcbt=\E[Z, oc=\E]104\E\\, 8000 op=\E[39;49m, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, 8001 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 8002 rs2=\E[!p\E[4l\E>, 8003 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%; 8004 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 8005 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=, 8006 smso=\E[7m, smul=\E[4m, E3=\E[3J, use=att610+cvis, 8007 use=ansi+csr, use=ansi+cup, use=ansi+enq, use=ansi+local, 8008 use=ansi+idc, use=ansi+idl, use=ansi+rca2, use=ansi+rep, 8009 use=ansi+tabs, use=ecma+index, use=ecma+italics, 8010 use=ecma+strikeout, use=xterm+alt+title, 8011 use=xterm+pcfkeys, use=xterm+sm+1006, use=xterm+tmux2, 8012 use=xterm+sl-alt, use=bracketed+paste, 8013 use=report+version, use=xterm+focus, 8014 8015 ######## WEB CLIENTS 8016 8017 #### DomTerm 8018 # https://domterm.org 8019 # 8020 # Quoting its webpage: 8021 # The domterm command runs a server that manages sessions (usually shell 8022 # processes). The user interface and terminal emulation is handled by a 8023 # JavaScript library that can run in a regular web browser or an embedded 8024 # browser such as Electron, using Web Sockets to talk to the server. 8025 # 8026 # it can connect to, and display in, a web browser, or as a standalone Qt 8027 # application. Either way, it displays in the current desktop session. 8028 # 8029 # Testing current code (2019/07/06) with Fedora 30: 8030 # tack 8031 # no flash 8032 # no beep 8033 # no dim 8034 # no blink 8035 # no invis 8036 # no italics 8037 # ok smxx/rmxx 8038 # bce screen shows diagonal lines... 8039 # kf6 sends nothing 8040 # kf11 toggles maximize 8041 # cursor-key application mode works 8042 # numeric keypad application does not work; keys always send face-codes 8043 # sends utf-8 for meta, like xterm 8044 # vttest 8045 # has problems with menu #1 (wrapping) 8046 # DA = VT200 with 132 columns, color 8047 # DA2 = 990, 100300 ("\E[>990;100300;0c") 8048 # no VT52, no double-size characters 8049 # vt220 ECH test works, SRM, DECSCA do not 8050 # S7C1T/S8C1t does not work 8051 # DECUDK does not work 8052 # CNL does not work; the other ECMA-48 cursor-movement tests work 8053 # REP sort-of works (does not match xterm) 8054 # SD/SU work, but not SL/SR 8055 # window reporting: works for size in chars/pixels, but not other tests 8056 # X10 mouse clicks work -- but return 4 rather than 1 for codes 8057 # any-event mouse mode acts like any-button mode 8058 # implements SGR mouse-mode 8059 # other: 8060 # does not implement initc 8061 # does accept either colons or semicolon in 38/48 SGR. 8062 domterm|DomTerm web client, 8063 npc, 8064 bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l, 8065 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| 8066 %t;7%;m, 8067 sitm@, smkx=\E[?1h, use=linux+kbs, use=xterm+256setaf, 8068 use=ecma+index, use=xterm+focus, use=xterm+sm+1006, 8069 use=xterm+pcfkeys, use=xterm-basic, 8070 use=bracketed+paste, 8071 8072 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS 8073 # 8074 8075 # Columbus UNIX virtual terminal. This terminal also appears in 8076 # UNIX 4.0 and successors as line discipline 1 (?), but is 8077 # undocumented and does not really work quite right. 8078 cbunix|cb unix virtual terminal, 8079 OTbs, am, da, db, 8080 cols#80, lines#24, lm#0, 8081 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 8082 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 8083 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB, 8084 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, 8085 smso=\Ea^D, smul=\Ea^A, 8086 # (vremote: removed obsolete ":nl@:" -- esr) 8087 vremote|virtual remote terminal, 8088 am@, 8089 cols#79, use=cbunix, 8090 8091 pty|4bsd pseudo teletype, 8092 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, 8093 smso=\Ea$, smul=\Ea!, use=cbunix, 8094 8095 #### Emacs 8096 8097 # https://www.emacswiki.org/emacs/AnsiTerm 8098 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el 8099 # 8100 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30 8101 eterm|GNU Emacs term.el terminal emulation, 8102 am, mir, xenl, 8103 cols#80, lines#24, 8104 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, 8105 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8106 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 8107 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 8108 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 8109 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 8110 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m, rmir=\E[4l, 8111 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smir=\E[4h, smso=\E[7m, 8112 smul=\E[4m, use=xterm+alt47, use=ansi+cpr, 8113 8114 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2 8115 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96, 8116 msgr, 8117 colors#8, pairs#64, 8118 blink=\E[5m, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB, 8119 kcuf1=\EOC, kcuu1=\EOA, op=\E[39;49m, rc=\E8, ri=\EM, 8120 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, sc=\E7, 8121 setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm, 8122 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%? 8123 %p7%t;8%;m, 8124 sgr0=\E[m, use=vt220+pcedit, use=eterm, 8125 8126 # shell.el can "do" color, though not nearly as well. 8127 # 8128 # seen here: 8129 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode 8130 # 8131 # and 8132 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html 8133 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el 8134 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el 8135 # 8136 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays 8137 # frequently. The contemporaneous term.el aka ansi-term does not "support" 8138 # italics but does not lose the color information -TD 2017/01/28. 8139 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes, 8140 am, hc, 8141 colors#8, it#8, ncv#13, pairs#64, 8142 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m, 8143 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 8144 sgr0=\E[m, smul=\E[4m, use=ecma+italics, 8145 8146 #### Screen 8147 8148 # Entries for use by the `screen' program by Juergen Weigert, 8149 # Michael Schroeder, Oliver Laumann. The screen and 8150 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries 8151 # come from University of Wisconsin and may be older. 8152 # (screen: added <cnorm> on ANSI model -- esr) 8153 # 8154 # 'screen' defines extensions to termcap. Some are used in its terminal 8155 # description: 8156 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 8157 # AX (bool) Does understand ANSI set default fg/bg color 8158 # (\E[39m / \E[49m). 8159 # S0 (str) Switch charset 'G0' to the specified charset. 8160 # E0 (str) Switch charset 'G0' back to standard charset. 8161 # 8162 # Initially tested with screen 3.09.08 8163 # 8164 # According to its manual page 8165 # 8166 # Screen is a full-screen window manager that multiplexes a physical 8167 # terminal between several processes (typically interactive shells). Each 8168 # virtual terminal provides the functions of a DEC VT100 terminal and, in 8169 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI 8170 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for 8171 # multiple character sets). 8172 # 8173 # However, there is a design error in its support for video highlights. The 8174 # program uses a table (rendlist) which equates the SGR codes to terminal 8175 # capabilities. That, and color-decoding are hardcoded in screen; its behavior 8176 # is modified only by the presence or absence of the corresponding capabilities. 8177 # Not by their values. 8178 # 8179 # If screen sets the TERMCAP variable, it uses hardcoded strings which 8180 # correspond to the rendlist table. 8181 # 8182 # The table gives this information: 8183 # 8184 # SGR capability 8185 # --- --------- 8186 # 1 bold 8187 # 2 dim 8188 # 3 standout 8189 # 4 underline 8190 # 5 blink 8191 # - (unused 6) 8192 # 7 reverse 8193 # - (unused 8-21) 8194 # 22 reset bold, standout and dim 8195 # 23 reset standout 8196 # 24 reset underline 8197 # 25 reset blink 8198 # - (unused 26) 8199 # 27 reset reverse 8200 # 8201 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively. 8202 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction. 8203 # Without some redesign of screen, it is not possible to extend the set of 8204 # capabilities. Substitution would be possible, e.g., sending italics in 8205 # place of underline. 8206 # 8207 # Because screen uses hard-coded parsing, it does not check if two capabilities 8208 # use the same value. For example, changing standout to be the same as any of 8209 # the other capabilities will confuse screen. Curses applications which use 8210 # sgr are not impacted (because that usually resets all capabilities before 8211 # setting any), but termcap applications do not use sgr -TD 8212 # 8213 # The "screen" entry should use ecma+index rather than just indn, but tmux 8214 # defaults to using "screen". For background, screen supported ecma+index 8215 # since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by 8216 # the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or 8217 # terminfo entries (which list about 60% of the control sequences). 8218 screen-base|VT 100/ANSI X3.64 virtual terminal (base), 8219 OTbs, OTpt, am, km, mir, msgr, xenl, G0, 8220 cols#80, it#8, lines#24, ncv@, U8#1, 8221 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 8222 yzz{{||}}~~, 8223 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 8224 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r, 8225 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8226 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 8227 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 8228 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 8229 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 8230 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, 8231 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 8232 ind=\n, indn=\E[%p1%dS, is2=\E)0, kcbt=\E[Z, kcub1=\EOD, 8233 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, 8234 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 8235 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 8236 kmous=\E[M, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 8237 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, 8238 rs2=\Ec\E[?1000l\E[?25h, sc=\E7, 8239 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t; 8240 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;, 8241 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=, 8242 smso=\E[3m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, 8243 E0=\E(B, S0=\E(%p1%c, use=xterm+kbs, use=vt220+pcedit, 8244 use=xterm+alt1049, use=ecma+color, use=vt100+enq, 8245 8246 screen|VT 100/ANSI X3.64 virtual terminal, 8247 use=screen4, 8248 8249 no+brackets|cancel bracketed paste, 8250 BD@, BE@, PE@, PS@, 8251 8252 # The bce and status-line entries are from screen 3.9.13 (and require some 8253 # changes to .screenrc). 8254 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, 8255 bce, 8256 ech@, use=screen, 8257 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, 8258 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, 8259 8260 # ====================================================================== 8261 # Entries for GNU Screen with 16 colors. 8262 # Those variations permit to benefit from 16 colors palette, and from 8263 # bold font and blink attribute separated from bright colors. But they 8264 # are less portable than the generic "screen" 8 color entries: Their 8265 # usage makes real sense only if the terminals you attach and reattach 8266 # do all support 16 color palette. 8267 8268 screen-16color|GNU Screen with 16 colors, 8269 use=ibm+16color, use=screen, 8270 8271 screen-16color-s|GNU Screen with 16 colors and status line, 8272 use=ibm+16color, use=screen-s, 8273 8274 screen-16color-bce|GNU Screen with 16 colors and BCE, 8275 use=ibm+16color, use=screen-bce, 8276 8277 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line, 8278 bce, use=ibm+16color, use=screen-s, 8279 8280 # ====================================================================== 8281 # Entries for GNU Screen 4.02 with --enable-colors256. 8282 8283 screen-256color|GNU Screen with 256 colors, 8284 use=xterm+256setaf, use=screen, 8285 8286 screen-256color-s|GNU Screen with 256 colors and status line, 8287 use=xterm+256setaf, use=screen-s, 8288 8289 screen-256color-bce|GNU Screen with 256 colors and BCE, 8290 use=xterm+256setaf, use=screen-bce, 8291 8292 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line, 8293 bce, use=xterm+256setaf, use=screen-s, 8294 8295 screen.xterm-256color|GNU Screen with xterm using 256 colors, 8296 use=xterm+256setaf, use=screen.xterm-new, 8297 8298 screen.konsole-256color|GNU Screen with konsole using 256 colors, 8299 XR@, use=xterm+256setaf, use=screen.konsole, 8300 8301 screen.vte-256color|GNU Screen with vte using 256 colors, 8302 use=xterm+256setaf, use=screen.vte, 8303 8304 screen.putty-256color|GNU Screen with putty using 256 colors, 8305 use=xterm+256setaf, use=screen.putty, 8306 8307 screen.mlterm-256color|GNU Screen with mlterm using 256 colors, 8308 XR@, use=xterm+256setaf, use=screen.mlterm, 8309 8310 # ====================================================================== 8311 8312 # Read the fine manpage: 8313 # When screen tries to figure out a terminal name for 8314 # itself, it first looks for an entry named "screen.<term>", 8315 # where <term> is the contents of your $TERM variable. If 8316 # no such entry exists, screen tries "screen" (or "screen-w" 8317 # if the terminal is wide (132 cols or more)). If even this 8318 # entry cannot be found, "vt100" is used as a substitute. 8319 # 8320 # Notwithstanding the manpage, screen uses its own notion of the termcap 8321 # and some keys from "screen.<term>" are ignored. Here is an entry which 8322 # covers those (tested with screen 4.00.02) -TD 8323 screen+fkeys|function-keys according to screen, 8324 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@, 8325 khome=\E[1~, kslt@, 8326 8327 # See explanation before "screen" entry. Cancel italics so that applications 8328 # do not assume screen supports the feature. Add this tweak to entries which 8329 # extend screen for terminals which do support italics. 8330 screen+italics|screen cannot support italics, 8331 ritm@, sitm@, 8332 # 8333 # Here are a few customized entries which are useful -TD 8334 # 8335 # Notes: 8336 # (a) screen does not support invis. 8337 # (b) screen's implementation of bw is incorrect according to tack. 8338 # (c) screen appears to hardcode the strings for khome/kend, making it 8339 # necessary to override the "use=" clause's values (screen+fkeys). 8340 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, 8341 # which is NOT the same as the terminfo screen.<term>. 8342 # (e) when screen finds one of these customized entries, it sets $TERM to 8343 # match. Hence, no "screen.xterm" entry is provided, since that would 8344 # create heartburn for people running remote xterm's. 8345 # (f) screen does not support rep. 8346 # (g) the xterm-new compatibility does not include bracketed paste. 8347 # 8348 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV 8349 # since the default translations override the built-in keycode 8350 # translation. They are suppressed here to show what is tested by tack. 8351 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, 8352 bce@, bw, 8353 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@, 8354 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| 8355 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m, 8356 E3@, use=screen+italics, use=screen+fkeys, 8357 use=xterm+x11mouse, use=ecma+index, use=ansi+rep, 8358 use=ecma+strikeout, use=xterm+pcfkeys, 8359 use=xterm+nofkeys, 8360 8361 # Don't use this, because not everyone has "screen.xterm-new": 8362 #:screen.xterm|screen for modern xterm, 8363 #: use=screen.xterm-new, 8364 8365 # xterm-r6 does not really support khome/kend unless it is propped up by 8366 # the translations resource. 8367 screen.xterm-r6|screen customized for X11R6 xterm, 8368 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6, 8369 # Color applications running in screen and TeraTerm do not play well together 8370 # on Solaris because Sun's curses implementation gets confused. 8371 screen.teraterm|disable ncv in teraterm, 8372 ncv#127, 8373 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i 8374 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u 8375 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 8376 use=screen+fkeys, use=xterm+x11mouse, use=screen, 8377 # Other terminals 8378 screen.rxvt|screen in rxvt, 8379 bw, XT, 8380 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 8381 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq, 8382 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad, 8383 use=screen, 8384 screen.Eterm|screen in Eterm, 8385 use=xterm+x11mouse, use=screen+fkeys, use=Eterm, 8386 screen.mrxvt|screen in mrxvt, 8387 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt, 8388 screen.vte|screen in any VTE-based terminal, 8389 use=xterm+x11mouse, use=screen+italics, 8390 use=screen+fkeys, use=no+brackets, use=vte, 8391 screen.gnome|screen in GNOME Terminal, 8392 use=xterm+x11mouse, use=screen+italics, 8393 use=screen+fkeys, use=no+brackets, use=gnome, 8394 screen.konsole|screen in KDE console window, 8395 XR@, use=xterm+x11mouse, use=screen+italics, 8396 use=screen+fkeys, use=no+brackets, use=konsole, 8397 # fix the backspace key 8398 screen.linux|screen.linux-s|screen in Linux console, 8399 bw, 8400 kcbt@, use=linux+sfkeys, use=xterm+x11mouse, 8401 use=screen+fkeys, use=screen, 8402 screen.mlterm|screen in mlterm, 8403 XR@, use=xterm+x11mouse, use=screen+fkeys, 8404 use=no+brackets, use=mlterm, 8405 screen.putty|screen in putty, 8406 use=xterm+x11mouse, use=screen+fkeys, use=no+brackets, 8407 use=putty, 8408 8409 # The default "screen" entry is reasonably portable, but not optimal for the 8410 # most widely-used terminal emulators. The "bce" capability is supported in 8411 # screen since 3.9.13, and when used, will require fewer characters to be sent 8412 # to the terminal for updates. 8413 # 8414 # If you are using only terminals which support bce, then you can use this 8415 # feature in your screen configuration. 8416 # 8417 # Adding these lines to your ".screenrc" file will allow using these customized 8418 # entries: 8419 # term screen-bce 8420 # bce on 8421 # defbce on 8422 screen-bce.xterm-new|screen optimized for modern xterm, 8423 bce, 8424 ech@, use=screen+italics, use=screen.xterm-new, 8425 screen-bce.rxvt|screen optimized for rxvt, 8426 bce, 8427 ech@, use=screen.rxvt, 8428 screen-bce.Eterm|screen optimized for Eterm, 8429 bce, 8430 ech@, use=screen.Eterm, 8431 screen-bce.mrxvt|screen optimized for mrxvt, 8432 bce, 8433 ech@, use=screen.mrxvt, 8434 screen-bce.gnome|screen optimized for GNOME-Terminal, 8435 ech@, use=screen+italics, use=screen.gnome, 8436 screen-bce.konsole|screen optimized for KDE console window, 8437 ech@, use=screen+italics, use=screen.konsole, 8438 screen-bce.linux|screen optimized for Linux console, 8439 bce, 8440 ech@, use=screen.linux, 8441 8442 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, 8443 cols#132, use=screen, 8444 8445 screen2|VT 100/ANSI X3.64 virtual terminal (old 2.x), 8446 cols#80, it#8, lines#24, 8447 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H, 8448 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 8449 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 8450 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 8451 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, 8452 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 8453 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 8454 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 8455 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, 8456 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, 8457 smso=\E[3m, smul=\E[4m, tbc=\E[3g, 8458 # (screen3: removed unknown ":xv:LP:G0:" -- esr) 8459 screen3|VT 100/ANSI X3.64 virtual terminal (old 3.x), 8460 km, mir, msgr, 8461 cols#80, it#8, lines#24, 8462 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 8463 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8464 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 8465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 8466 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 8467 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 8468 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD, 8469 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 8470 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 8471 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 8472 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 8473 smul=\E[4m, tbc=\E[3g, 8474 8475 # screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file 8476 # was last updated in 2009 to include 256-color support. The most recent 8477 # release is 4.6.2 (October 2017). 8478 screen4|VT 100/ANSI X3.64 virtual terminal (4.x), 8479 use=ecma+index, use=screen-base, 8480 8481 # As of December 2022, screen 5.0 has not been released. 8482 # 8483 # However, 8484 # 8485 # https://savannah.gnu.org/bugs/?36676 8486 # 8487 # mentions a change to implement italics which should be in a version 5, 8488 # (implemented 2016-11-05, but merged 2017-07-09). That does away with the 8489 # longstanding use of SGR 3 for standout, and interprets it as italics. 8490 # 8491 # The same development branch has some support for direct-colors, but none 8492 # of this has been documented. 8493 screen5|VT 100/ANSI X3.64 virtual terminal (someday), 8494 rmso=\E[27m, 8495 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 8496 %p5%t;2%;m%?%p9%t\016%e\017%;, 8497 smso=\E[7m, use=ecma+italics, use=ecma+index, 8498 use=screen-base, 8499 8500 #### Tmux 8501 8502 # tmux is mostly compatible with screen, but has support for italics, and some 8503 # of the xterm cursor bits. 8504 # 8505 # However, unlike screen, tmux has no provision for using derived terminal 8506 # descriptions. When screen starts, it looks for a suitable "inner" terminal 8507 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The 8508 # various entries such as screen.xterm-new provide a way to more closely 8509 # match the terminal. 8510 tmux|tmux terminal multiplexer, 8511 invis=\E[8m, rmso=\E[27m, 8512 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%? 8513 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 8514 smso=\E[7m, E3=\E[3J, Smulx=\E[4:%p1%dm, 8515 use=ecma+italics, use=ecma+strikeout, use=xterm+edit, 8516 use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux, 8517 use=screen, use=bracketed+paste, use=report+version, 8518 use=xterm+focus, 8519 8520 tmux-256color|tmux with 256 colors, 8521 use=xterm+256setaf, use=tmux, 8522 8523 tmux-direct|tmux with direct-color indexing, 8524 use=kitty+setal, use=xterm+direct, use=tmux, 8525 8526 #### Mosh 8527 # https://mosh.org/ 8528 # mosh 1.3.2 8529 # 8530 # mosh's DA1 identifies it as a VT220, but sets $TERM to "xterm" or 8531 # "xterm-256color" (hard-coded), which in its pretense that it is xterm, is 8532 # several years out of date. 8533 # 8534 # There is little documentation; the existing manpages amount to a quarter of 8535 # the length of mosh.org's heavily promotional website. This entry is based 8536 # on testing, and reading the source-code. For the latter, analysis is aided 8537 # by the developer's extensive use of hard-coded strings. 8538 # 8539 # The website has an example "Tricky unicode", which shows a shell command 8540 # with a typo (i.e., assuming that a byte in octal uses 4 digits) and suggests 8541 # that mosh and OS X Terminal "gets it right". 8542 # 8543 # The example as shown would not work. Correcting the typo, xterm gives the 8544 # result expected by the mosh developer. 8545 # 8546 # The other examples follow in a similar vein. 8547 # 8548 # It does not support these xterm features: 8549 # use=ansi+rep (xterm patch #36, 1997) 8550 # use=ecma+strikeout (xterm patch #305, 2014) 8551 # use=vt420+lrmm (xterm patch #279, 2012) 8552 # titlestack in smcup/rmcup has no effect (xterm patch #251, 2009) 8553 # does not support "dim" (xterm patch #305, 2014) 8554 # In tack 8555 # rmkx/smkx has no effect on numeric keypad 8556 # acs stuff has no effect, is included here for ease of comparison 8557 # 8558 # Unlike screen and tmux, mosh has only limited awareness of a terminal 8559 # description. It assumes that the underlying terminal is xterm, and would 8560 # not work well with terminals using other key-definitions, such as urxvt. 8561 mosh|mobile shell, 8562 U8#1, 8563 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%| 8564 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 8565 sgr0=\E(B\E[m, use=ansi+enq, use=xterm+meta, 8566 use=ecma+italics, use=ecma+index, use=xterm+acs, 8567 use=xterm+focus, use=xterm+sm+1006, use=xterm+pcfkeys, 8568 use=xterm-xfree86, use=bracketed+paste, 8569 8570 mosh-256color|mosh using 256-colors, 8571 use=xterm+256color, use=mosh, 8572 8573 #### Dvtm 8574 8575 # dvtwm 0.15 8576 # http://www.brain-dump.org/projects/dvtm/ 8577 # 8578 # + This uses ncurses to manage the display, including support for italics and 8579 # default-colors. 8580 # + However, default-colors are incomplete: do not set bce. 8581 # + It does not implement flash (since no \e[?5h) 8582 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1. 8583 # Oddly enough, if $TERM contains "linux", it attempts to set the title. 8584 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table. 8585 # + The built-in table of function-keys (based on rxvt) is incomplete (ends 8586 # with kf22). 8587 # + It also omits the shifted cursor- and editing-keypad keys. 8588 # However, it is confused by xterm's shifted cursor- and editing-keypad keys 8589 # (and passes those through without interpretation) 8590 # and may simply pass-through rxvt's, making it appear to work. 8591 # In other cases such as kf23 and up, no pass-through is done. 8592 # + Most of the mode-settings in the initialization/reset strings are not 8593 # implemented; dvtm copies its description from rxvt. 8594 dvtm|dynamic virtual terminal manager, 8595 am, eo, mir, msgr, xenl, AX, 8596 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, 8597 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8598 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 8599 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8600 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 8601 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 8602 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 8603 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 8604 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 8605 is1=\E[?47l\E=\E[?1l, 8606 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, 8607 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, 8608 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, 8609 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, 8610 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kel=\E[8\^, kend=\E[8~, 8611 kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 8612 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 8613 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 8614 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, 8615 kf22=\E[24$, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 8616 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 8617 khome=\E[7~, kind=\E[a, kmous=\E[M, kri=\E[b, op=\E[39;49m, 8618 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[27m, 8619 rmul=\E[24m, 8620 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 8621 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[? 8622 25h, 8623 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm, 8624 setaf=\E[3%p1%dm, 8625 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%? 8626 %p9%t\016%e\017%;, 8627 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m, 8628 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+alt47, 8629 use=vt220+vtedit, use=vt220+cvis, use=ecma+italics, 8630 8631 dvtm-256color|dynamic virtual terminal manager with 256 colors, 8632 colors#0x100, pairs#0x10000, 8633 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48; 8634 5;%p1%d%;m, 8635 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5 8636 ;%p1%d%;m, 8637 use=dvtm, 8638 8639 #### NCSA Telnet 8640 8641 # Francesco Potorti <F.Potorti (at] cnuce.cnr.it>: 8642 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has 8643 # been maintained until recently by the National Center for Supercomputer 8644 # Applications, and it is feature rich, stable and free. It can be downloaded 8645 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220, 8646 # xterm+sl, and the docs at NCSA. It works well. 8647 # 8648 # NCSA Telnet 2.6 for Macintosh in VT220 8-bit emulation mode 8649 # The terminal options should be set as follows: 8650 # Xterm sequences ON 8651 # use VT wrap mode ON 8652 # use Emacs arrow keys OFF 8653 # CTRL-COMND is Emacs meta ON 8654 # 8 bit mode ON 8655 # answerback string: "ncsa-vt220-8" 8656 # setup keys: all disabled 8657 # 8658 # Application mode is not used. 8659 # 8660 # Other special mappings: 8661 # Apple VT220 8662 # HELP Find 8663 # HOME Insert here 8664 # PAGEUP Remove 8665 # DEL Select 8666 # END Prev Screen 8667 # PAGEDOWN Next Screen 8668 # 8669 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking 8670 # text. 8671 # 8672 # The status-line manipulation is a mapping of the xterm-compatible control 8673 # sequences for setting the window-title. So you must use tsl and fsl in 8674 # pairs, since the latter ends the string that is loaded to the window-title. 8675 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in VT220-8 mode, 8676 am, km, mir, msgr, xenl, 8677 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 8678 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 8679 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 8680 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 8681 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 8682 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 8683 el=\E[K, el1=\E[1K, enacs=\E)0, 8684 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 8685 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 8686 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, 8687 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, 8688 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8689 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, 8690 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, 8691 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 8692 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, 8693 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, 8694 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, 8695 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, 8696 rmso=\E[27m, rmul=\E[24m, 8697 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, 8698 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%? 8699 %p9%t\E(0%e\E(B%;, 8700 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, 8701 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 8702 u8=\E[?62;1;6c, use=vt220+cvis, use=xterm+sl, 8703 use=ansi+enq, 8704 ncsa|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color), 8705 use=ncsa-m, use=klone+color, 8706 ncsa-ns|NCSA Telnet 2.7 for Macintosh in VT220-8 mode (color w/o status line), 8707 hs@, 8708 dsl@, fsl@, tsl@, use=ncsa, 8709 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in VT220-8 mode (no status line), 8710 hs@, 8711 dsl@, fsl@, tsl@, use=ncsa-m, 8712 # alternate -TD: 8713 # The documented function-key mapping refers to the Apple Extended Keyboard 8714 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style 8715 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on 8716 # some keyboards and many applications require these as F1-F4. 8717 # 8718 ncsa-vt220|NCSA Telnet using VT220-compatible function keys, 8719 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 8720 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 8721 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 8722 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 8723 kf8=\E[19~, kf9=\E[20~, use=ncsa, 8724 8725 #### Pilot Pro Palm-Top 8726 # 8727 # Termcap for Top Gun Telnet and SSH on the Palm Pilot. 8728 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/ 8729 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 8730 OTbs, am, xenl, 8731 cols#39, lines#16, 8732 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n, 8733 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 8734 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s, 8735 rmso=\EB, smso=\Eb, 8736 8737 # From: Federico Bianchi <bianchi (at] www.arte.unipi.it> 8738 # These entries are for the Embeddable Linux Kernel System (ELKS) 8739 # project - an heavily stripped down Linux to be run on 16 bit 8740 # boxes or, eventually, to be used in embedded systems - and have been 8741 # adapted from the stock ELKS termcap. The project itself looks stalled, 8742 # and the latest improvements I know of date back to March 2000. 8743 # 8744 # To cope with the ELKS dumb console I added an "elks-glasstty" entry; 8745 # as an added bonus, this deals with all the capabilities common to 8746 # both VT52 and ANSI (or, eventually, "special") modes. 8747 8748 elks-glasstty|ELKS glass-TTY capabilities, 8749 OTbs, am, 8750 cols#80, it#8, lines#25, 8751 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, 8752 nel=\r\n, 8753 8754 elks-vt52|ELKS VT52 console, 8755 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 8756 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, 8757 home=\EH, use=elks-glasstty, 8758 8759 elks-ansi|ELKS ANSI console, 8760 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 8761 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 8762 rmso=\E[m, smso=\E[7m, use=elks-glasstty, 8763 8764 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation 8765 # instead of VT52, but the "elks" entry still refers to the latter. 8766 8767 elks|default ELKS console, 8768 use=elks-vt52, 8769 8770 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS 8771 # one but in screen size 8772 8773 sibo|ELKS SIBO console, 8774 cols#61, it#8, lines#20, use=elks-vt52, 8775 8776 ######## COMMERCIAL WORKSTATION CONSOLES 8777 # 8778 8779 #### Alpha consoles 8780 # 8781 8782 # This is from the OSF/1 Release 1.0 termcap file 8783 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 8784 am, xon, 8785 cols#80, lines#25, 8786 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 8787 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 8788 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, 8789 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 8790 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, 8791 8792 #### Sun consoles 8793 # 8794 8795 # :is1: resets scrolling region in case a previous user had used "tset VT100" 8796 oldsun|Sun Microsystems Workstation console, 8797 OTbs, am, km, mir, msgr, 8798 cols#80, it#8, lines#34, 8799 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C, 8800 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 8801 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 8802 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 8803 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 8804 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 8805 rmso=\E[m, sgr0=\E[m, smso=\E[7m, 8806 # From: Alexander Lukyanov <lav (at] video.yars.free.net>, 14 Nov 1995 8807 # <lines> capability later corrected by J.T. Conklin <jtc (at] cygnus.com> 8808 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) 8809 sun-il|Sun Microsystems console with working insert-line, 8810 am, km, msgr, 8811 cols#80, lines#34, 8812 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 8813 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 8814 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 8815 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 8816 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 8817 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z, 8818 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, 8819 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, 8820 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 8821 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z, 8822 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, 8823 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, 8824 smso=\E[7m, u8=\E[1t, u9=\E[11t, 8825 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il> 8826 # flake out on the last line. Unfortunately, without them the terminal has no 8827 # way to scroll. 8828 sun-cgsix|sun-ss5|Sun SparcStation 5 console, 8829 il@, il1@, use=sun-il, 8830 8831 # The Sun console was documented in the wscons manual page (apparently 8832 # unrelated to the "wscons" used by some of the BSDs). 8833 # 8834 # https://illumos.org/man/4D/wscons 8835 # https://www.bitsavers.org/pdf/sun/sun1/800-0345_Sun-1_System_Reference_Manual_Jul82.pdf 8836 # 8837 # The early cmdtool and shelltool programs in Sun's NeWS were based on this. 8838 # After NeWS was discontinued, XView provided a similar shelltool, with an 8839 # incomplete manual page. Presumably the intent was to document features of 8840 # shelltool not in wscons: 8841 # 8842 # https://manpages.ubuntu.com/manpages/bionic/en/man1/shelltool.1.html 8843 # https://manpages.ubuntu.com/manpages/bionic/en/man1/cmdtool.1.html 8844 # 8845 # The wscons manual page and the XView source show that it had no feature that 8846 # could be used in ncurses u6/u7/u8/u9 extensions. Interesting, the XView 8847 # source shows that its shelltool could tell the host what a particular mode 8848 # was set to. But neither that nor its CSI..t controls support u6/u7/u8/u9. 8849 # 8850 # If you are using an SS5, change the sun definition to use sun-ss5. 8851 sun|sun1|sun2|Sun Microsystems Inc. workstation console, 8852 use=sun-il, 8853 8854 sun+sl|Sun Workstation window status line, 8855 hs, 8856 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, 8857 8858 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 8859 sun-s|Sun Microsystems Workstation window with status line, 8860 use=sun+sl, use=sun, 8861 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 8862 use=sun+sl, use=sun-e, 8863 sun-48|Sun 48-line window, 8864 cols#80, lines#48, use=sun, 8865 sun-34|Sun 34-line window, 8866 cols#80, lines#34, use=sun, 8867 sun-24|Sun 24-line window, 8868 cols#80, lines#24, use=sun, 8869 sun-17|Sun 17-line window, 8870 cols#80, lines#17, use=sun, 8871 sun-12|Sun 12-line window, 8872 cols#80, lines#12, use=sun, 8873 sun-1|Sun 1-line window for sysline, 8874 eslok, hs, 8875 cols#80, lines#1, 8876 dsl=^L, fsl=\E[K, tsl=\r, use=sun, 8877 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 8878 ich1@, rmir@, smir@, use=sun, 8879 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 8880 lines#35, 8881 rmcup=\E[>4h, smcup=\E[>4l, use=sun, 8882 sun-type4|Sun Workstation console with type 4 keyboard, 8883 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, 8884 kcuu1=\E[215z, use=sun-il, 8885 8886 # Most of the current references to sun-color are from users wondering why this 8887 # is the default on install. Details from reading the wscons manpage, adding 8888 # cub, etc., here (rather than in the base sun-il entry) since it is not clear 8889 # when those were added -TD (2005-05-28) 8890 # 8891 # According to wscons manpage, color is supported only on IA systems. 8892 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons 8893 # does not list these. It also sets ncv#3, however that corresponds to 8894 # underline and standout. 8895 # 8896 # Since the documentation and terminfo do not agree, see also current code at 8897 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c 8898 # 8899 # That (actually a different driver which "supports" sun-color) also supports 8900 # these features: 8901 # vpa=\E[%i%p1%dd 8902 # hpa=\E[%i%p1%d` 8903 # cbt=\E[Z 8904 # dim=\E[2m 8905 # blink=\E[5m 8906 # It supports bold, but not underline -TD (2009-09-19) 8907 sun-color|Sun Microsystems Workstation console with color support (IA systems), 8908 colors#8, ncv#3, pairs#64, 8909 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 8910 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, setab=\E[4%p1%dm, 8911 setaf=\E[3%p1%dm, 8912 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 8913 %=%t3%e%p1%d%;m, 8914 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6} 8915 %=%t3%e%p1%d%;m, 8916 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m, 8917 use=sun, 8918 8919 #### Iris consoles 8920 # 8921 8922 # (wsiris: this had extension capabilities 8923 # :HS=\E7F2:HE=\E7F7:\ 8924 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: 8925 # See the note on Iris extensions near the end of this file. 8926 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 8927 # <flash> from BRL -- esr) 8928 wsiris|iris40|IRIS emulating a 40 line Visual 50 (approximately), 8929 OTbs, OTnc, OTpt, am, 8930 OTkn#3, cols#80, it#8, lines#40, 8931 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, 8932 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 8933 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, 8934 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, 8935 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, 8936 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, 8937 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, 8938 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, 8939 smul=\E7R2\E9P, 8940 8941 #### NeWS consoles 8942 # 8943 # Console terminal windows under the NeWS (Sun's Display Postscript windowing 8944 # environment). Note: these have nothing to do with Sony's News workstation 8945 # line. 8946 # 8947 8948 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel 8949 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) 8950 psterm|psterm-basic|NeWS psterm-80x34, 8951 OTbs, am, hs, km, ul, 8952 cols#80, it#8, lines#34, 8953 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, 8954 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, 8955 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, 8956 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, 8957 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, 8958 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], 8959 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, 8960 tsl=\EOl, 8961 psterm-96x48|NeWS psterm 96x48, 8962 cols#96, lines#48, use=psterm, 8963 psterm-90x28|NeWS psterm 90x28, 8964 cols#90, lines#28, use=psterm, 8965 psterm-80x24|NeWS psterm 80x24, 8966 cols#80, lines#24, use=psterm, 8967 # This is a faster termcap for psterm. Warning: if you use this termcap, 8968 # some control characters you type will do strange things to the screen. 8969 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) 8970 psterm-fast|NeWS psterm fast version (flaky ctrl chars), 8971 OTbs, am, hs, km, ul, 8972 cols#80, it#8, lines#34, 8973 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, 8974 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, 8975 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, 8976 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 8977 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, 8978 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, 8979 smso=^Oo, smul=^Ou, tsl=^Ol, 8980 8981 #### NeXT consoles 8982 # 8983 # Use `glasstty' for the Workspace application 8984 # 8985 8986 # From: Dave Wetzel <dave (at] turbocat.snafu.de> 22 Dec 1995 8987 next|NeXT console, 8988 am, xt, 8989 cols#80, it#8, lines#24, 8990 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 8991 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 8992 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, 8993 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, 8994 nextshell|NeXT Shell application, 8995 am, 8996 cols#80, 8997 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H, 8998 kcud1=\n, nel=\r\n, 8999 9000 #### Sony NEWS workstations 9001 # 9002 9003 # (news-unk: this had :KB=news: -- esr) 9004 news-unk|Sony NEWS VT100 emulator common entry, 9005 OTbs, OTpt, am, xenl, 9006 cols#80, 9007 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 9008 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, 9009 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 9010 ed=\E[J, el=\E[K, home=\E[H, ht=^I, 9011 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 9012 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, 9013 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, 9014 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 9015 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, 9016 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 9017 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, 9018 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 9019 # 9020 # (news-29: this had :TY=ascii: --esr) 9021 news-29|Sony NEWS VT100 emulator with 29 lines, 9022 lines#29, use=news-unk, 9023 # (news-29-euc: this had :TY=euc: --esr) 9024 news-29-euc|Sony NEWS VT100 emulator with 29 lines and EUC, 9025 use=news-29, 9026 # (news-29-sjis: this had :TY=sjis: --esr) 9027 news-29-sjis|Sony NEWS VT100 emulator with 29 lines and SJIS, 9028 use=news-29, 9029 # 9030 # (news-33: this had :TY=ascii: --esr) 9031 news-33|Sony NEWS VT100 with 33 lines, 9032 lines#33, use=news-unk, 9033 # (news-33-euc: this had :TY=euc: --esr) 9034 news-33-euc|Sony NEWS VT100 with 33 lines and EUC, 9035 use=news-33, 9036 # (news-33-sjis: this had :TY=sjis: --esr) 9037 news-33-sjis|Sony NEWS VT100 with 33 lines and SJIS, 9038 use=news-33, 9039 # 9040 # (news-42: this had :TY=ascii: --esr) 9041 news-42|Sony NEWS VT100 with 42 lines, 9042 lines#42, use=news-unk, 9043 # (news-42-euc: this had :TY=euc: --esr) 9044 news-42-euc|Sony NEWS VT100 with 42 lines and EUC, 9045 use=news-42, 9046 # (news-42-sjis: this had :TY=sjis: --esr) 9047 news-42-sjis|Sony NEWS VT100 with 42 lines and SJIS, 9048 use=news-42, 9049 # 9050 # NEWS-OS old termcap entry 9051 # 9052 # (news-old-unk: this had :KB=news:TY=sjis: --esr) 9053 news-old-unk|old Sony NEWS VT100 emulator common entry, 9054 OTbs, OTpt, am, xenl, 9055 cols#80, vt#3, 9056 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 9057 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, 9058 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 9059 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, 9060 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 9061 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, 9062 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 9063 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 9064 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 9065 # 9066 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) 9067 nwp512|news|nwp514|news40|vt100-bm|nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|old Sony VT100 emulator 40 lines, 9068 OTbs, 9069 lines#40, 9070 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40 9071 r\E8, 9072 use=news-old-unk, 9073 # 9074 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) 9075 nwp512-a|nwp514-a|news-a|news42|news40-a|old Sony VT100 emulator 42 line, 9076 lines#42, 9077 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, 9078 use=news-old-unk, 9079 # 9080 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr) 9081 nwp513|nwp518|nwe501|newscbm|news31|nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old Sony VT100 emulator 31 lines, 9082 OTbs, 9083 lines#31, 9084 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31 9085 r\E8, 9086 use=news-old-unk, 9087 # 9088 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) 9089 # also the alias vt100-bm. 9090 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old Sony VT100 emulator 33 lines, 9091 OTbs, 9092 lines#33, 9093 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33 9094 r\E8, 9095 use=news-old-unk, 9096 # 9097 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr) 9098 news28|old Sony VT100 emulator 28 lines, 9099 OTbs, 9100 lines#28, 9101 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28 9102 r\E8, 9103 use=news-old-unk, 9104 # 9105 # (news29: this had :TY=ascii:KB=nws1200:\ --esr) 9106 news29|news28-a|old Sony VT100 emulator 29 lines, 9107 lines#29, 9108 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29 9109 r\E8, 9110 use=news-old-unk, 9111 # 9112 # (news511: this had :TY=sjis: --esr) 9113 nwp511|nwp-511|nwp-511 VT100, 9114 OTbs, OTpt, am, xenl, 9115 cols#80, lines#24, 9116 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 9117 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, 9118 ed=\E[J$<30/>, el=\E[K$<3/>, 9119 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 9120 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, 9121 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 9122 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, 9123 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 9124 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, 9125 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 9126 # (news517: this had :TY=sjis:. --esr) 9127 nwp517|nwp-517|nwp-517 VT200 80 cols 30 rows, 9128 eslok, hs, 9129 cols#80, lines#30, 9130 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 9131 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 9132 tsl=\E[1$}\E[;%df, use=vt220-base, 9133 # (news517-w: this had :TY=sjis:. --esr) 9134 nwp517-w|nwp-517-w|nwp-517 VT200 132 cols 50 rows, 9135 eslok, hs, 9136 cols#132, lines#50, 9137 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 9138 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 9139 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 9140 tsl=\E[1$}\E[;%df, use=vt220-base, 9141 9142 #### Common Desktop Environment 9143 # 9144 9145 # This ships with Sun's CDE in Solaris 2.5 9146 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav (at] video.yars.free.net> 9147 dtterm|CDE desktop terminal, 9148 am, mir, msgr, xenl, xon, 9149 cols#80, it#8, lines#24, lm#0, ncv@, 9150 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9151 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 9152 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9153 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 9154 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9155 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 9156 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 9157 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, 9158 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 9159 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, 9160 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9161 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9162 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9163 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, 9164 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 9165 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 9166 khlp=\E[28~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 9167 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, 9168 sc=\E7, 9169 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 9170 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9171 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9172 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=decid+cpr, 9173 use=vt220+vtedit, use=vt220+cvis, use=ecma+color, 9174 9175 ######## Non-Unix Consoles 9176 # 9177 9178 #### EMX termcap.dat compatibility modes 9179 # 9180 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the 9181 # no_color_video to inform the application that standout(1), underline(2) 9182 # reverse(4) and invisible(64) don't work with color. 9183 emx-base|DOS special keys, 9184 bce, bw, 9185 it#8, ncv#71, 9186 bel=^G, use=ansi.sys, 9187 9188 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, 9189 # a Unix-style environment used on OS/2. (Note that the suffix makes some 9190 # names longer than 14 characters, the nominal maximum). 9191 # 9192 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. 9193 ansi-emx|ANSI.SYS color, 9194 eo, 9195 clear=\E[1;33;44m\E[H\E[J, cr=\r, cud1=\n, dch=\E[%p1%dp, 9196 ed=\E[J, flash=\E[?5h$<100/>\E[?5l, ht=^I, hts=\EH, 9197 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kf0=\0D, kll=\0O, 9198 kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l, 9199 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, 9200 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smso=\E[0;31;47m, 9201 smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, u9=\E[c, 9202 use=vt220+cvis, use=emx-base, 9203 # nice colors for Emacs (white on blue, mode line white on cyan) 9204 ansi-color-2-emx|ANSI.SYS color 2, 9205 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, 9206 rmso=\E[0;37;44m, rmul=\E[0;37;44m, sgr0=\E[0;37;44m, 9207 smso=\E[1;37;46m, smul=\E[1;36;44m, use=ansi-emx, 9208 # nice colors for Emacs (white on black, mode line black on cyan) 9209 ansi-color-3-emx|ANSI.SYS color 3, 9210 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, 9211 rmso=\E[0;37;40m, rmul=\E[0;37;40m, sgr0=\E[0;10m, 9212 smso=\E[1;37;46m, smul=\E[0;36;40m, use=ansi-emx, 9213 mono-emx|stupid monochrome ANSI terminal with only one kind of emphasis, 9214 am, 9215 cols#80, it#8, lines#24, 9216 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 9217 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 9218 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, 9219 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, 9220 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, 9221 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m, 9222 sgr0=\E[0m, 9223 9224 #### Cygwin 9225 9226 # Use this for cygwin32 (tested with beta 19.1) 9227 # underline is colored bright magenta 9228 # shifted kf1-kf12 are kf11-kf22 9229 cygwinB19|ANSI emulation for cygwin32, 9230 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, 9231 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 9232 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 9233 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 9234 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 9235 kf8=\E[19~, kf9=\E[20~, rmam@, smam@, use=vt220+pcedit, 9236 use=ansi.sys, 9237 9238 # Use this for cygwin (tested with version 1.1.0). 9239 # I've combined pcansi and linux. Some values of course were different and 9240 # I've indicated which of these were and which I used. 9241 # Cheers, earnie_boyd (at] yahoo.com 9242 # several changes based on running with tack and comparing with older entry -TD 9243 # more changes from csw: 9244 # add cbt [backtab] 9245 # remove eo [erase overstrike with blank] 9246 # change clear was \E[H\E[J now \E[2J (faster?) 9247 # remove cols 9248 # remove lines 9249 # remove ncv#3 [colors collide with highlights, bitmask] not applicable 9250 # to MSDOS box? 9251 # add cub [cursor back param] 9252 # add cuf [cursor forward param] 9253 # add cuu [cursor up param] 9254 # add cud [cursor down param] 9255 # add hs [has status line] 9256 # add fsl [return from status line] 9257 # add tsl [go to status line] 9258 # add smacs [Start alt charset] (not sure if this works) 9259 # add rmacs [End alt charset] (ditto) 9260 # add smcup [enter_ca_mode] (save console; thanks Corinna) 9261 # add rmcup [exit_ca_mode] (restore console; thanks Corinna) 9262 # add kb2 [center of keypad] 9263 # add u8 [user string 8] \E[?6c 9264 # add el [clear to end of line] \E[K 9265 # Notes: 9266 # cnorm [make cursor normal] not implemented 9267 # flash [flash] not implemented 9268 # blink [blink] not implemented very usefully in cygwin? \E[5m 9269 # dim [dim] not implemented very usefully in cygwin? \E[2m 9270 # cub1 [cursor back 1] typically \E[D, but ^H is faster? 9271 # kNXT [shifted next key] not implemented 9272 # kPRV [shifted prev key] not implemented 9273 # khome [home key] really is \E[1~ NOT \E[H 9274 # tbc [clear tab stops] not implemented 9275 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni 9276 # smpch [Start PC charset] is \E[11m, same as smacs 9277 # rmpch [End PC charset] is \E[10m, same as rmacs 9278 # mir [move in insert mode] fails in tack? 9279 # bce [back color erase] causes problems with change background color? 9280 # cvvis [make cursor very visible] causes a stackdump when testing with 9281 # testcurs using the output option? \E[?25h\E[?8c 9282 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c 9283 # ech [erase characters param] broken \E[%p1%dX 9284 # kcbt [back-tab key] not implemented in cygwin? \E[Z 9285 # 9286 # 2005/11/12 -TD 9287 # Remove cbt since it does not work in current cygwin 9288 # Add 'mir' and 'in' flags based on tack 9289 cygwin|ANSI emulation for Cygwin, 9290 am, hs, mir, msgr, xon, 9291 colors#8, it#8, pairs#64, 9292 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 9293 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 9294 \301w\302x\263y\363z\362{\343|\330}\234~\376, 9295 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, 9296 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 9297 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 9298 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 9299 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, 9300 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 9301 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G, 9302 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9303 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9304 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9305 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, 9306 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, 9307 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kspd=^Z, nel=\r\n, 9308 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, 9309 rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, 9310 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 9311 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7 9312 %t;8%;%?%p9%t;11%;m, 9313 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smpch=\E[11m, 9314 smso=\E[7m, smul=\E[4m, tsl=\E];, vpa=\E[%i%p1%dd, 9315 use=xterm+alt47, use=vt220+pcedit, use=vt102+enq, 9316 9317 # I've supplied this so that you can help test new values and add other 9318 # features. Cheers, earnie_boyd (at] yahoo.com. 9319 # 9320 # Some features are from pcansi. The op value is from linux. Function-keys 9321 # are from linux. These have been tested not to cause problems. xenl was in 9322 # this list, but DOES cause problems so it has been removed 9323 cygwinDBG|Debug Version for Cygwin, 9324 am, eo, mir, msgr, xon, 9325 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 9326 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 9327 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 9328 \301w\302x\263y\363z\362{\343|\330}\234~\376, 9329 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 9330 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 9331 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9332 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 9333 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 9334 el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H, 9335 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 9336 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, 9337 kPRV=\E[5$, kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9338 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[[A, kf10=\E[21~, 9339 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 9340 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 9341 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 9342 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 9343 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 9344 rmacs=\E[10m, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 9345 rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 9346 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5 9347 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 9348 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, 9349 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt220+pcedit, 9350 use=vt220+cvis, use=vt102+enq, 9351 9352 #### DJGPP 9353 9354 # Key definitions: 9355 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the 9356 # encodings used by other x86 environments. All others are invented for DJGPP. 9357 # Oddly enough, while several combinations of modifiers are tabulated, there is 9358 # none for shifted cursor keys. 9359 # 9360 # F1 \E[[A 9361 # F2 \E[[B 9362 # F3 \E[[C 9363 # F4 \E[[D 9364 # F5 \E[[E 9365 # F6 \E[17~ 9366 # F7 \E[18~ 9367 # F8 \E[19~ 9368 # F9 \E[20~ 9369 # F10 \E[21~ 9370 # F11 \E[23~ 9371 # F12 \E[24~ 9372 # 9373 # Delete \E[3~ 9374 # Down Arrow \E[B 9375 # End \E[4~ 9376 # Home \E[1~ 9377 # Insert \E[2~ 9378 # Left Arrow \E[D 9379 # Page Down \E[6~ 9380 # Page Up \E[5~ 9381 # Right Arrow \E[C 9382 # Up Arrow \E[A 9383 # 9384 # Shift-F1 \E[25~ 9385 # Shift-F2 \E[26~ 9386 # Shift-F3 \E[27~ 9387 # Shift-F4 \E[28~ 9388 # Shift-F5 \E[29~ 9389 # Shift-F6 \E[30~ 9390 # Shift-F7 \E[31~ 9391 # Shift-F8 \E[32~ 9392 # Shift-F9 \E[33~ 9393 # Shift-F10 \E[34~ 9394 # Shift-F11 \E[35~ 9395 # Shift-F12 \E[36~ 9396 # 9397 # Ctrl-F1 \E[47~ 9398 # Ctrl-F2 \E[48~ 9399 # Ctrl-F3 \E[49~ 9400 # Ctrl-F4 \E[50~ 9401 # Ctrl-F5 \E[51~ 9402 # Ctrl-F6 \E[52~ 9403 # Ctrl-F7 \E[53~ 9404 # Ctrl-F8 \E[54~ 9405 # Ctrl-F9 \E[55~ 9406 # Ctrl-F10 \E[56~ 9407 # Ctrl-F11 \E[57~ 9408 # Ctrl-F12 \E[58~ 9409 # 9410 # Ctrl-Delete \E[43~ 9411 # Ctrl-Down Arrow \E[38~ 9412 # Ctrl-End \E[44~ 9413 # Ctrl-Home \E[41~ 9414 # Ctrl-Insert \E[42~ 9415 # Ctrl-Left Arrow \E[39~ 9416 # Ctrl-Page Down \E[46~ 9417 # Ctrl-Page Up \E[45~ 9418 # Ctrl-Right Arrow \E[40~ 9419 # Ctrl-Up Arrow \E[37~ 9420 # 9421 # Alt-F1 \E[59~ 9422 # Alt-F2 \E[60~ 9423 # Alt-F3 \E[61~ 9424 # Alt-F4 \E[62~ 9425 # Alt-F5 \E[63~ 9426 # Alt-F6 \E[64~ 9427 # Alt-F7 \E[65~ 9428 # Alt-F8 \E[66~ 9429 # Alt-F9 \E[67~ 9430 # Alt-F10 \E[68~ 9431 # Alt-F11 \E[79~ 9432 # Alt-F12 \E[80~ 9433 # 9434 # Alt-Delete \E[65~ 9435 # Alt-Down Arrow \E[60~ 9436 # Alt-End \E[66~ 9437 # Alt-Home \E[41~ 9438 # Alt-Insert \E[64~ 9439 # Alt-Left Arrow \E[61~ 9440 # Alt-Page Down \E[68~ 9441 # Alt-Page Up \E[67~ 9442 # Alt-Right Arrow \E[62~ 9443 # Alt-Up Arrow \E[59~ 9444 # 9445 # Also: 9446 # Alt-A \E[82~ 9447 # Alt-B \E[82~ 9448 # Alt-C \E[83~ 9449 # Alt-D \E[84~ 9450 # Alt-E \E[85~ 9451 # Alt-F \E[86~ 9452 # Alt-G \E[87~ 9453 # Alt-H \E[88~ 9454 # Alt-I \E[89~ 9455 # Alt-J \E[90~ 9456 # Alt-K \E[91~ 9457 # Alt-L \E[92~ 9458 # Alt-M \E[93~ 9459 # Alt-N \E[94~ 9460 # Alt-O \E[95~ 9461 # Alt-P \E[96~ 9462 # Alt-Q \E[97~ 9463 # Alt-R \E[98~ 9464 # Alt-S \E[99~ 9465 # Alt-T \E[100~ 9466 # Alt-U \E[101~ 9467 # Alt-V \E[102~ 9468 # Alt-W \E[103~ 9469 # Alt-X \E[104~ 9470 # Alt-Y \E[105~ 9471 # Alt-Z \E[106~ 9472 djgpp|ANSI emulation for DJGPP alpha, 9473 am, bce, msgr, xhp, xon, xt, 9474 colors#8, it#8, pairs#64, 9475 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 9476 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 9477 \301w\302x\263y\363z\362{\343|\330}\234~\376, 9478 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 9479 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H, 9480 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 9481 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 9482 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 9483 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 9484 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 9485 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m, 9486 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9487 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9488 kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, 9489 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, nel=\r\n, op=\E[37;40m, 9490 rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm, 9491 setaf=\E[3%p1%dm, 9492 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%? 9493 %p6%t;1%;%?%p7%t;8%;m, 9494 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 9495 use=vt220+pcedit, use=ecma+index, 9496 9497 djgpp203|entry for DJGPP 2.03, 9498 OTbs, am, 9499 cols#80, it#8, lines#25, 9500 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, 9501 kcud1=\n, nel=\r\n, 9502 9503 djgpp204|entry for DJGPP 2.04, 9504 OTbs, am, AX, 9505 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, 9506 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 9507 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, 9508 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 9509 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 9510 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, 9511 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 9512 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 9513 il1=\E[L, ind=\E[S, invis=\E[8m, kbs=^H, kcub1=\E[D, 9514 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, kf1=\E[[A, 9515 kf10=\E[21~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 9516 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kll=\E[4~, 9517 nel=\r\n, rev=\E[7m, ri=\E[T, rmso=\E[m, setab=\E[4%p1%dm, 9518 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 9519 use=vt220+pcedit, use=ecma+index, 9520 9521 #### U/Win 9522 9523 # This is tested using U/Win's telnet. Scrolling is omitted because it is 9524 # buggy. Another odd bug appears when displaying "~" in alternate character 9525 # set (the emulator spits out error messages). Compare with att6386 -TD 9526 uwin|U/Win 3.2 console, 9527 am, eo, in, msgr, xenl, xon, 9528 colors#8, it#8, ncv#58, pairs#64, 9529 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i 9530 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u 9531 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 9532 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 9533 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9534 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 9535 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 9536 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, 9537 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, 9538 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, 9539 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 9540 kf9=\EOX, khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, 9541 rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, 9542 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 9543 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 9544 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, 9545 smul=\E[4m, tbc=\E[3g, use=ansi+cpr, use=vt220+cvis, 9546 9547 #### Microsoft (miscellaneous) 9548 9549 # This entry fits the Windows NT console when the _POSIX_TERM environment 9550 # variable is set to 'on'. While the Windows NT POSIX console is seldom used, 9551 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP 9552 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating 9553 # systems is not, and (surprise!) they match very well. 9554 # 9555 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up 9556 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only 9557 # are the installation instructions a pile of mind-numbing bureaucratese, 9558 # but the termcap entry is actually broken and unusable as given; the :do: 9559 # capability is misspelled "d". 9560 # 9561 # To use this, you need to a bunch of environment variables: 9562 # 9563 # SET _POSIX_TERM=on 9564 # SET TERM=ansi 9565 # SET TERMCAP=location of termcap file in POSIX file format 9566 # which is case-sensitive. 9567 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap 9568 # SET TMP=//C/TEMP 9569 # 9570 # Important note: setting the TMP environment variable in POSIX style renders 9571 # it incompatible with a lot of other applications, including Visual C++. So 9572 # you should have a separate command window just for vi. All the other 9573 # variables may be permanently set in the Control Panel\System applet. 9574 # 9575 # You can find out more about the restrictions of this facility at 9576 # <https://jeffpar.github.io/kbarchive/kb/108/Q108581/> 9577 # 9578 # From: Federico Bianchi <bianchi (at] magna.cisid.unipi.it>, 15 Jan 1997 9579 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, 9580 am, bw, msgr, 9581 cols#80, it#8, lines#25, 9582 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 9583 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 9584 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, 9585 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, 9586 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, 9587 # From: jew (at] venus.sunquest.com 9588 # Date: 19 Feb 93 23:41:07 GMT 9589 # Here's a combination of ansi and vt100 termcap 9590 # entries that works nearly perfectly for me 9591 # (Gateway 2000 Handbook and Microsoft Works 3.0): 9592 pcmw|PC running Microsoft Works, 9593 am, xenl, 9594 cols#80, it#8, lines#24, vt#3, 9595 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 9596 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, 9597 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 9598 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 9599 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, 9600 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 9601 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, 9602 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, 9603 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 9604 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 9605 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 9606 tbc=\E[3g$<2/>, 9607 9608 # From: Federico Bianchi 9609 # This is the entry for the OpenNT terminal. 9610 # The ntconsole name is for backward compatibility. 9611 # This is for OpenNT 2.0 and later. 9612 # Later OpenNT was renamed to Interix. 9613 # 9614 # Presently it is distributed by Microsoft as Services For Unix (SFU). 9615 # The 3.5 beta contained ncurses 4.2 (that is header files and executables, 9616 # the documentation dated from 1.9.9e) -TD 9617 # 9618 # For a US keyboard, with 12 function-kecbt=\E[Z, ys, 9619 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z, 9620 # kf13-kf24 use the shift-key 9621 # kf25-kf36 use the left alt-key 9622 # kf37-kf38 use the control-key 9623 # kf49-kf60 use the shift- and control-keys 9624 # The shifted cursor keys send the sequences originally used for kf61-kf64: 9625 # down=\EF+ (kf61) 9626 # up=\EF- (kf62) 9627 # left=\EF^ (unassigned) 9628 # right=\EF$ (kf64) 9629 9630 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, 9631 am, bce, msgr, 9632 cols#80, it#8, lines#25, 9633 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 9634 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 9635 \301w\302x\263y\363z\362{\343|\330}\234~\376, 9636 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD, 9637 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, 9638 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 9639 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 9640 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 9641 kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 9642 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[U, 9643 kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, 9644 kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, 9645 kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, 9646 kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, 9647 kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, 9648 kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, 9649 kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, 9650 kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, 9651 kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, 9652 kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, 9653 kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, 9654 kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, kf8=\EF8, kf9=\EF9, 9655 khome=\E[H, kich1=\E[L, kind=\EF+, kll=\E[U, knp=\E[T, 9656 kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u, 9657 rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, 9658 rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b, 9659 smso=\E[7m, smul=\E[4m, use=ecma+index, use=klone+color, 9660 9661 opennt-35|ntconsole-35|OpenNT-term35 compatible with color, 9662 lines#35, use=opennt, 9663 9664 opennt-50|ntconsole-50|OpenNT-term50 compatible with color, 9665 lines#50, use=opennt, 9666 9667 opennt-60|ntconsole-60|OpenNT-term60 compatible with color, 9668 lines#60, use=opennt, 9669 9670 opennt-100|ntconsole-100|OpenNT-term100 compatible with color, 9671 lines#100, use=opennt, 9672 9673 # OpenNT wide terminals 9674 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, 9675 cols#125, use=opennt, 9676 9677 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, 9678 lines#35, use=opennt-w, 9679 9680 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, 9681 lines#50, use=opennt-w, 9682 9683 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, 9684 lines#60, use=opennt-w, 9685 9686 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, 9687 cols#132, use=opennt, 9688 9689 # OpenNT terminals with no smcup/rmcup (names match termcap entries) 9690 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, 9691 rmcup@, smcup@, use=opennt, 9692 9693 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, 9694 lines#35, use=opennt-nti, 9695 9696 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, 9697 lines#50, use=opennt-nti, 9698 9699 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, 9700 lines#60, use=opennt-nti, 9701 9702 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, 9703 lines#100, use=opennt-nti, 9704 9705 ######## COMMON TERMINAL TYPES 9706 # 9707 # This section describes terminal classes and maker brands that are still 9708 # quite common, but have proprietary command sets not blessed by ANSI. 9709 # 9710 9711 #### Altos 9712 # 9713 # Altos made a moderately successful line of UNIX boxes. In 1990 they were 9714 # bought out by Acer, a major Taiwanese manufacturer of PC-clones. 9715 # Acer has a web site at http://www.acer.com. 9716 # 9717 # Altos descriptions from Ted Mittelstaedt <tedm (at] agora.rain.com> 4 Sep 1993 9718 # His comments suggest they were shipped with the system. 9719 # 9720 9721 # (altos2: had extension capabilities 9722 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 9723 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 9724 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 9725 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 9726 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 9727 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ 9728 # :HL=^AP\r:SP=\E[i:\ 9729 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ 9730 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ 9731 # Comparison with the k* capabilities makes it obvious that the c* things are 9732 # shift keys. I have renamed them to keys 32 and up accordingly. Also, 9733 # :sr: was given as a boolean-- esr) 9734 altos2|alt2|altos-2|Altos II, 9735 cols#80, it#8, lines#24, xmc#0, 9736 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C, 9737 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, 9738 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 9739 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n, 9740 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, 9741 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, 9742 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, 9743 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 9744 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 9745 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 9746 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 9747 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, 9748 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 9749 smam=\E[?7h, smso=\E[7m, smul=\E[4m, 9750 # (altos3: had extension capabilities 9751 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 9752 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 9753 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 9754 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 9755 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 9756 # :HL=^AP\r:SP=\E[i:\ 9757 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T: 9758 altos3|altos5|alt3|alt5|altos-3|altos-5|Altos III or V, 9759 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, 9760 altos4|alt4|altos-4|Altos IV, 9761 use=wy50, 9762 # (altos7: had extension capabilities: 9763 # :GG#0:GI=\EH8:GF=\EH7:\ 9764 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 9765 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 9766 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 9767 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 9768 # Comparison with the k* capabilities makes it obvious that the c* things are 9769 # shift keys. I have renamed them to keys 32 and up accordingly. I have 9770 # also made this entry relative to adm12 in order to give it an <sgr>. The 9771 # <invis> imported by use=adm+sgr may work, let me know. -- esr) 9772 altos7|alt7|Altos VII, 9773 am, mir, 9774 cols#80, lines#24, xmc#0, 9775 acsc=j5k3l2m1n8q:t4u9v=w0x6, blink=\EG2, bold=\EGt, 9776 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 9777 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 9778 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, 9779 ind=\n, invis=\EG1, 9780 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, 9781 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, 9782 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, 9783 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 9784 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 9785 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 9786 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 9787 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, 9788 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej, 9789 rmir=\Er, smir=\Eq, use=adm+sgr, 9790 altos7pc|alt7pc|Altos PC VII, 9791 kend=\ET, use=altos7, 9792 9793 #### Hewlett-Packard (hp) 9794 # 9795 # Hewlett-Packard 9796 # 8000 Foothills Blvd 9797 # Roseville, CA 95747 9798 # Vox: 1-(916)-785-4363 (Technical response line for VDTs) 9799 # 1-(800)-633-3600 (General customer support) 9800 # 9801 # 9802 # As of March 1998, HP no longer has any terminals in production. 9803 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being 9804 # supported (they still have parts). So are the 2392a and 2394a. 9805 # See the WORKSTATION CONSOLES section for the 700s. 9806 # 9807 9808 # Generic HP terminal - this should (hopefully) work on any HP terminal. 9809 hpgeneric|hp|Hewlett-Packard generic terminal, 9810 OTbs, OTpt, am, da, db, mir, xhp, 9811 cols#80, lines#24, lm#0, vt#6, 9812 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 9813 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, 9814 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, 9815 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, 9816 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, 9817 vpa=\E&a%p1%dY, 9818 9819 hp110|Hewlett-Packard model 110 portable, 9820 lines#16, use=hpgeneric, 9821 9822 hp+pfk+cr|HP function keys with CR, 9823 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, 9824 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, 9825 9826 hp+pfk-cr|HP function keys w/o CR, 9827 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, 9828 kf8=\Ew, 9829 9830 # The hp2621s use the same keys for the arrows and function keys, 9831 # but not separate escape sequences. These definitions allow the 9832 # user to use those keys as arrow keys rather than as function 9833 # keys. 9834 hp+pfk+arrows|HP alternate arrow definitions, 9835 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, 9836 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, 9837 kll=\Eq\r, kri=\Es\r, 9838 9839 hp+arrows|HP arrow definitions, 9840 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 9841 kind=\ES, kll=\EF, kri=\ET, 9842 9843 # Generic stuff from the HP 262x series 9844 # 9845 hp262x|HP 262x terminals, 9846 xhp, 9847 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, 9848 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 9849 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 9850 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, 9851 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 9852 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%| 9853 %;%?%p4%t%{65}%|%;%c, 9854 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, 9855 9856 # Note: no <home> on HPs since that homes to top of memory, not screen. 9857 # Due to severe 2621 braindamage, the only way to get the arrow keys to 9858 # transmit anything at all is to turn on the function key labels 9859 # with <smkx>, and even then the user has to hold down shift! 9860 # The default 2621 turns off the labels except when it has to to 9861 # enable the function keys. If your installation prefers labels 9862 # on all the time, or off all the time (at the "expense" of the 9863 # function keys), use 2621-nl or 2621-wl. 9864 # 9865 # Note: there are newer ROMs for 2621's that allow you to set 9866 # strap A so the regular arrow keys xmit \EA, etc, as with the 9867 # 2645. However, even with this strap set, the terminal stops 9868 # xmitting if you reset it, until you unset and reset the strap! 9869 # Since there is no way to set/unset the strap with an escape 9870 # sequence, we don't use it in the default. 9871 # If you like, you can use 2621-ba (brain-damaged arrow keys). 9872 hp2621-ba|HP 2621 w/new rom and strap A set, 9873 rmkx@, smkx@, use=hp+arrows, use=hp2621, 9874 9875 # hp2621 with function labels. Most of the time they are off, 9876 # but inside vi, the function key labels appear. You have to 9877 # hold down shift to get them to xmit. 9878 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|HP 2621 w/labels, 9879 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, 9880 hp2621-fl|HP 2621, 9881 xhp@, xon, 9882 pb#19200, 9883 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, 9884 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, smkx=\E&jB, smso=\E&dD, 9885 use=hp+pfk+cr, use=hpgeneric, 9886 9887 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p 9888 hp2621p|HP 2621 with printer, 9889 mc4=\E&p13C, mc5=\E&p11C, use=hp2621, 9890 9891 hp2621p-a|HP 2621p with fn as arrows, 9892 use=hp+pfk+arrows, use=hp2621p, 9893 9894 # hp2621 with k45 keyboard 9895 hp2621-k45|hp2621k45|k45|HP 2621 with 45 keyboard, 9896 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 9897 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, 9898 9899 # 2621 using all 48 lines of memory, only 24 visible at any time. 9900 hp2621-48|HP 48 line 2621, 9901 lines#48, 9902 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, 9903 use=hp2621, 9904 9905 # 2621 with no labels ever. Also prevents vi delays on escape. 9906 hp2621-nl|HP 2621 with no labels, 9907 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, 9908 use=hp2621-fl, 9909 9910 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs 9911 # (wrong). 9912 # 9913 hp2621-nt|HP 2621 w/no tabs, 9914 ht@, use=hp2621, 9915 9916 # Hp 2624 B with 4 or 10 pages of memory. 9917 # 9918 # Some assumptions are made with this entry. These settings are 9919 # NOT set up by the initialization strings. 9920 # 9921 # Port Configuration 9922 # RecvPace=Xon/Xoff 9923 # XmitPace=Xon/Xoff 9924 # StripNulDel=Yes 9925 # 9926 # Terminal Configuration 9927 # InhHndShk=Yes 9928 # InhDC2=Yes 9929 # XmitFnctn(A)=No 9930 # InhEolWrp=No 9931 # 9932 # Note: the 2624 DOES have a true <home>, believe it or not! 9933 # 9934 # The 2624 has an "error line" to which messages can be sent. 9935 # This is CLOSE to what is expected for a "status line". However, 9936 # after a message is sent to the "error line", the next carriage 9937 # return is EATEN and the "error line" is turned back off again! 9938 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>. 9939 # 9940 # This entry supports emacs (and any other program that uses raw 9941 # mode) at 4800 baud and less. I couldn't get the padding right 9942 # for 9600. 9943 # 9944 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) 9945 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, 9946 da, db, 9947 lm#96, 9948 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp, 9949 9950 # This hp2626 entry does not use any of the fancy windowing stuff 9951 # of the 2626. 9952 # 9953 # Indeed, terminfo does not yet handle such stuff. Since changing 9954 # any window clears memory, it is probably not possible to use 9955 # this for screen opt. 9956 # 9957 # ed is incredibly slow most of the time - I am guessing at the 9958 # exact padding. Since the terminal uses xoff/xon this is intended 9959 # only for cost computation, so that the terminal will prefer el 9960 # or even dl1 which is probably faster! 9961 # 9962 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only 9963 # extra slow on the last line of the window. 9964 # 9965 # The padding probably should be changed. 9966 # 9967 hp2626|hp2626a|hp2626p|HP 2626, 9968 da, db, 9969 lm#0, pb#19200, 9970 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, 9971 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr, 9972 use=hp+labels, use=scrhp, 9973 9974 # This entry is for sysline. It allocates a 23 line window with 9975 # a 115 line workspace for regular use, and a 1 line window for 9976 # the status line. 9977 # 9978 # This assumes port 2 is being used. 9979 # Turn off horizontal line, Create ws #1 with 115 lines, 9980 # Create ws #2 with 1 line, Create window #1 lines 1-23, 9981 # Create window #2 lines 24-24, Attach cursor to workspace #1. 9982 # Note that this clears the tabs so it must be done by tset before 9983 # it sets the tabs. 9984 # 9985 hp2626-s|HP 2626 using only 23 lines, 9986 eslok, hs, 9987 lines#23, 9988 fsl=\E&d@\E&w7f2p1I\E&w4f1I, 9989 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S 9990 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r, 9991 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, 9992 # Force terminal back to 24 lines after being 23. 9993 hp2626-ns|HP 2626 using all 24 lines, 9994 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S 9995 \s\E&w3f2I\s\E&w7f2p1I\s\r, 9996 use=hp2626, 9997 # Various entries useful for small windows on 2626. 9998 hp2626-12|Hewlett-Packard 2626 12 lines, 9999 lines#12, use=hp2626, 10000 hp2626-12x40|Hewlett-Packard 2626 12 lines 40 columns, 10001 cols#40, lines#12, use=hp2626, 10002 hp2626-x40|Hewlett-Packard 2626 40 columns, 10003 cols#40, use=hp2626, 10004 hp2626-12-s|Hewlett-Packard 2626 11 lines plus status, 10005 lines#11, use=hp2626-s, 10006 10007 # 10008 # hp2627 color tubes from University of Wisconsin 10009 # 10010 hp2627a-rev|HP 2627 with reverse video colors, 10011 ht=^I, 10012 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3 10013 \r, 10014 kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@, 10015 smul=\E&dD\E&v1S, use=hp2621-nl, 10016 hp2627a|HP 2627 color terminal with no labels, 10017 ht=^I, 10018 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, 10019 kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S, 10020 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, 10021 use=hp2621-nl, 10022 hp2627c|HP 2627 color (cyan) terminal with no labels, 10023 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, 10024 use=hp2627a, 10025 10026 # hp2640a doesn't have the Y cursor addressing feature, and C is 10027 # memory relative instead of screen relative, as we need. 10028 # 10029 hp2640a|HP 2640a, 10030 cup@, rmkx@, smkx@, use=hp2645, 10031 10032 hp2640b|hp2644a|HP 264x series, 10033 rmkx@, smkx@, use=hp2645, 10034 10035 # (hp2641a: removed unknown :gu: -- esr) 10036 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, 10037 am, da, db, mir, xhp, 10038 cols#80, lines#24, 10039 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 10040 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 10041 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, 10042 if=/usr/share/tabset/std, il1=\EL, ind=\n, 10043 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, 10044 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 10045 vpa=\E&a%p1%2dY, 10046 10047 # This terminal should be used at 4800 baud or less. It needs padding for 10048 # plain characters at 9600, I guessed at an appropriate cr delay. It really 10049 # wants ^E/^F handshaking, but that doesn't work well even if you write 10050 # software to support it. 10051 hp2645|hp45|HP 2645 series, 10052 pb#9600, 10053 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, 10054 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 10055 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, 10056 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, 10057 rmkx=\E&s0A, 10058 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%| 10059 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, 10060 sgr0=\E&d@, smkx=\E&s1A, use=hpgeneric, 10061 # You should use this terminal at 4800 baud or less. 10062 hp2648|hp2648a|HP 2648a graphics terminal, 10063 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, 10064 dch1=\EP$<7>, ip=$<5>, use=hp2645, 10065 10066 # The HP 150 terminal is a fairly vanilla HP terminal, with the 10067 # clreol standout problem. It also has graphics capabilities and 10068 # a touch screen, which we don't describe here. 10069 hp150|Hewlett Packard Model 150, 10070 OTbs, use=hp2622, 10071 10072 # HP 2382a terminals, "the little ones." They don't have any 10073 # alternate character set support and sending out ^N/^O will 10074 # leave the screen blank. 10075 hp2382a|hp2382|Hewlett Packard 2382a, 10076 da, db, 10077 lh#1, lm#48, 10078 acsc@, 10079 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2 10080 %s, 10081 rmacs@, 10082 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga 10083 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+ 10084 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64} 10085 %+%e%{64}%;%;%c, 10086 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, 10087 10088 hp2621-a|hp2621a-a|hp2621 with fn as arrows, 10089 use=hp+pfk+arrows, use=hp2621-fl, 10090 10091 # newer hewlett packard terminals 10092 10093 newhpkeyboard|generic entry for HP extended keyboard, 10094 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 10095 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 10096 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, 10097 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, 10098 use=hp+pfk-cr, 10099 10100 newhp|generic entry for new Hewlett Packard terminals, 10101 am, bw, mir, xhp, xon, 10102 cols#80, lines#24, pb#4800, 10103 acsc=2[3@4>5I9(:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X:Y+Z*dHjGkTlRmFn 10104 /q\,t5u6v8w7x., 10105 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H, 10106 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, 10107 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n, 10108 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n, 10109 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, 10110 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, 10111 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, 10112 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, 10113 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga 10114 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+ 10115 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64} 10116 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;, 10117 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, 10118 tbc=\E3, use=newhpkeyboard, 10119 10120 memhp|memory relative addressing for new HP ttys, 10121 vt#6, 10122 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, 10123 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, 10124 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, 10125 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, 10126 10127 scrhp|screen relative addressing for new HP ttys, 10128 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, 10129 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, 10130 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, 10131 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, 10132 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, 10133 10134 # (hp+labels: added label values from a BRL termcap -- esr) 10135 hp+labels|"standard" label info for new HP ttys, 10136 lh#2, lw#8, nlab#8, 10137 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 10138 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2 10139 %s, 10140 rmln=\E&j@, smln=\E&jB, 10141 10142 hp+printer|"standard" printer info for HP ttys, 10143 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, 10144 10145 10146 # The new hp2621b is kind of a cross between the old 2621 and the 10147 # new 262x series of machines. It has dip-switched options. 10148 # The firmware has a bug in it such that if you give it a null 10149 # length label, the following character is eaten! 10150 hp2621b|HP 2621b with old style keyboard, 10151 lh#1, lm#48, lw#8, nlab#8, 10152 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 10153 kind=\ET, kll=\EF, kri=\ES, 10154 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c 10155 %;%p2%s\E%{111}%p1%+%c\r, 10156 smln=\E&jB, use=hp2621, 10157 10158 hp2621b-p|HP 2621b with printer, 10159 use=hp+printer, use=hp2621b, 10160 10161 # hp2621b - new 2621b with new extended keyboard 10162 # these are closer to the new 26xx series than the other 2621b 10163 hp2621b-kx|HP 2621b with extended keyboard, 10164 use=newhpkeyboard, use=hp2621b, 10165 10166 hp2621b-kx-p|HP 2621b with new keyboard & printer, 10167 use=hp+printer, use=hp2621b-kx, 10168 10169 # Some assumptions are made in the following entries. 10170 # These settings are NOT set up by the initialization strings. 10171 # 10172 # Port Configuration 10173 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes 10174 # 10175 # Terminal Configuration 10176 # InhHndShk(G)=Yes InhDC2(H)=Yes 10177 # XmitFnctn(A)=No InhEolWrp=No 10178 # 10179 # 10180 # Hp 2622a & hp2623a display and graphics terminals 10181 # 10182 hp2622|hp2622a|HP 2622, 10183 da, db, 10184 lm#0, pb#19200, 10185 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp, 10186 10187 # The 2623 is a 2622 with extra graphics hardware. 10188 hp2623|hp2623a|HP 2623, 10189 use=hp2622, 10190 10191 hp2624b-p|hp2624b-4p-p|Hewlett Packard 2624 B with printer, 10192 use=hp+printer, use=hp2624, 10193 10194 # The hewlett packard B can have an optional extra 6 pages of memory. 10195 hp2624-10p|hp2624a-10p|hp2624b-10p|Hewlett Packard 2624 B w/ 10 pages of memory, 10196 lm#240, use=hp2624, 10197 10198 hp2624b-10p-p|Hewlett Packard 2624 B w/ extra memory & printer, 10199 lm#240, use=hp2624b-p, 10200 10201 # Color manipulations for HP terminals 10202 hp+color|HP with colors, 10203 ccc, 10204 colors#16, ncv#17, pairs#7, 10205 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e. 10206 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1 10207 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%= 10208 %t1%e.%p7%d%;z%p1%dI, 10209 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5 10210 I\E&v1b1c6I\E&v1x1y7I, 10211 op=\E&v0S, scp=\E&v%p1%dS, 10212 10213 # <is2> sets the screen to be 80 columns wide 10214 hp2397a|hp2397|Hewlett Packard 2397A color terminal, 10215 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, 10216 10217 # HP 700/44 Setup parameters: 10218 # Terminal Mode HP-PCterm 10219 # Inhibit Auto Wrap NO 10220 # Status Line Host Writable 10221 # PC Character Set YES 10222 # Twenty-Five Line Mode YES 10223 # XON/XOFF @128 or 64 (sc) 10224 # Keycode Mode NO or YES (sc) 10225 # Backspace Key BS or BS/DEL 10226 # 10227 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; 10228 # \E\\? does not turn off keycode mode 10229 # <smsc> sets alternate start/stop; keycode on 10230 hpansi|hp700|Hewlett Packard 700/44 in HP-PCterm mode, 10231 am, eo, xenl, xon, 10232 cols#80, lines#25, 10233 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x 10234 \263, 10235 bel=^G, cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub1=\E[D, 10236 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 10237 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 10238 ich1=\E[@, il1=\E[L, ind=\n, 10239 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, 10240 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10241 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 10242 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, 10243 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, 10244 kpp=\E[5~, rmam=\E[?7l, 10245 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, 10246 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 10247 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, 10248 smul=\E[4m, xoffc=g, xonc=e, use=vt220+cvis, 10249 # 10250 # (hp2392: copied <rmir> here from hpex -- esr) 10251 hp2392|239x series, 10252 cols#80, 10253 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, 10254 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, 10255 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, 10256 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, 10257 use=hpsub, 10258 10259 hpsub|HP terminals -- capability subset, 10260 am, da, db, mir, xhp, xon, 10261 lines#24, 10262 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 10263 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 10264 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, 10265 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, 10266 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, 10267 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, 10268 10269 # hpex: 10270 # May be used for most 24 x 80 hp terminals, 10271 # but has no padding added, so may allow runover in some terminals at high 10272 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and 10273 # hp98x5 terminal emulators or hp98x6 consoles. 10274 # Adds xy-cursor addressing, vertical cursor addressing, home, 10275 # last line, and underline capabilities. 10276 # 10277 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", 10278 # moved <rmir> here from hpsub -- esr) 10279 hpex|HP extended capabilities, 10280 cud1=\n, cup=\E&a%p1%dy%p2%dC, kcub1=^H, kcud1=\n, 10281 nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, 10282 vpa=\E&a%p1%dY, use=hpsub, 10283 10284 # From: Ville Sulko <Ville.Sulko (at] bip.atk.tpo.fi>, 05 Aug 1996 10285 hp2|hpex2|Hewlett-Packard extended capabilities newer version, 10286 am, da, db, mir, xhp, 10287 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, 10288 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB, 10289 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 10290 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 10291 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, 10292 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, 10293 knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 10294 pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 10295 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 10296 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 10297 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, 10298 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 10299 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+ 10300 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 10301 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 10302 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 10303 use=hp+pfk-cr, use=hp+arrows, 10304 10305 # HP 236 console 10306 # From: <ddavis (at] ic.berkeley.edu> 10307 hp236|hp236 internal terminal emulator, 10308 OTbs, am, 10309 cols#80, lines#24, 10310 clear=\EF, cnorm=\EDE, cub1=^H, 10311 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, 10312 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, 10313 sgr0=\ECI, smso=\EBI, 10314 10315 # This works on a hp300 console running Utah 4.3 BSD 10316 # From: Craig Leres <leres (at] okeeffe.berkeley.edu> 10317 hp300h|HP Catseye console, 10318 OTbs, am, da, db, mir, xhp, 10319 cols#128, lines#51, lm#0, xmc#0, 10320 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB, 10321 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 10322 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, 10323 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H, 10324 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 10325 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, 10326 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, 10327 vpa=\E&a%p1%dY, 10328 # From: Greg Couch <gregc (at] ernie.berkeley.edu> 10329 hp9837|hp98720|hp98721|HP 9000/300 workstations, 10330 OTbs, am, da, db, mir, xhp, 10331 cols#128, it#8, lines#46, lm#0, 10332 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, 10333 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 10334 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 10335 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, 10336 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 10337 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, 10338 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, 10339 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, 10340 tbc=\E3, vpa=\E&a%p1%dY, 10341 # HP 9845 desktop computer from BRL 10342 # (hp9845: removed unknown capability :gu: -- esr) 10343 hp9845|HP 9845, 10344 OTbs, am, da, db, eo, mir, xhp, 10345 cols#80, lines#21, 10346 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 10347 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 10348 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, 10349 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 10350 # From: Charles A. Finnell of MITRE <finnell (at] mitre.org>, developed 07SEP90 10351 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>; 10352 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) 10353 hp98550|hp98550a|HP 9000 Series 300 color console, 10354 OTbs, am, da, db, mir, xhp, 10355 cols#128, it#8, lines#49, lm#0, 10356 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, 10357 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 10358 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, 10359 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 10360 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds, 10361 kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, 10362 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU, 10363 kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, rmir=\ER, 10364 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, 10365 smir=\EQ, smkx=\E&s1A, smso=\E&dJ, smul=\E&dD, tbc=\E3, 10366 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows, 10367 10368 # From: Martin Trusler 10369 hp98550-color|hp98550a-color|HP 9000 Series 300 color console (Trusler), 10370 OTbs, am, ccc, da, db, km, mir, xhp, 10371 colors#8, cols#128, it#8, lh#2, lines#49, lm#0, lw#8, nlab#8, 10372 pairs#8, xmc#0, 10373 acsc=+>\,<-\^.v0\374``a\374f\372g\376h\374j+k+l+m+n+o-q-s-t+ 10374 u+v+w+x|y<z>{*|!}\273~\362, 10375 bel=^G, bold=\E&dD, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, 10376 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 10377 dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\E&a0y0C, 10378 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\ES, 10379 initp=\E&v0m%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e. 10380 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1 10381 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%= 10382 %t1%e.%p7%d%;z%p1%dI, 10383 is1=\EH\EJ, kbs=^H, kctab=\E2, kdch1=\EP, kdl1=\EM, ked=\EJ, 10384 kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, kll=\EF, knp=\EU, 10385 kpp=\EV, krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 10386 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5 10387 I\E&v1b1c6I\E&v1x1y7I, 10388 op=\E&v0S, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 10389 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 10390 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 10391 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 10392 rmacs=^O, rmam=\E&s1C, rmcup=\E&s0A, rmir=\ER, rmkx=\E&s0A, 10393 rmln=\E&j@, rmm=\E&k0I, rmso=\E&d@, rmul=\E&d@, rs1=\EE, 10394 scp=\E&v%p1%dS, 10395 sgr=\E&d%p1%p3%|%{2}%*%p2%p6%|%{4}%*%+%{64}%+%c%?%p9%t%' 10396 \016'%c%e%'\017'%c%;, 10397 sgr0=\E&d@\017, smacs=^N, smam=\E&s0C, smcup=\E&s1A, 10398 smir=\EQ, smkx=\E&s1A, smln=\E&jB, smm=\E&k1I, smso=\E&dB, 10399 smul=\E&dD, tbc=\E3, u6=\Ea%dc%dR\r, u7=\Ea, 10400 u8=\E%[0123456789/], u9=\E*s1\^, vpa=\E&a%p1%dY, 10401 use=hp+pfk-cr, use=hp+arrows, 10402 10403 # From: Victor Duchovni <vic (at] fine.princeton.edu> 10404 # (hp700-wy: removed obsolete ":nl=^J:"; 10405 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr) 10406 hp700-wy|HP 700/41 emulating Wyse30, 10407 OTbs, am, bw, mir, msgr, 10408 cols#80, it#8, lines#24, xmc#1, 10409 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L, 10410 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10411 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, 10412 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, 10413 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI, 10414 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, 10415 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, 10416 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, 10417 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, 10418 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, 10419 hp70092|hp70092a|hp70092A|HP 700/92, 10420 am, da, db, xhp, 10421 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, 10422 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, 10423 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, 10424 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 10425 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, 10426 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kdch1=\EP, 10427 kdl1=\EM, ked=\EJ, kel=\EK, khts=\E1, kich1=\EQ, kil1=\EL, 10428 kll=\EF, knp=\EU, kpp=\EV, krmir=\ER, ktbc=\E3, rev=\E&dB, 10429 ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, 10430 rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ, 10431 smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, 10432 vpa=\E&a%p1%dY, use=hp+pfk-cr, use=hp+arrows, 10433 10434 bobcat|sbobcat|HP 9000 model 300 console, 10435 am, da, db, mir, xhp, 10436 cols#128, it#8, lines#47, xmc#0, 10437 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 10438 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, 10439 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, 10440 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, 10441 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER, 10442 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 10443 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, 10444 gator-t|HP 9000 model 237 emulating extra-tall AAA, 10445 lines#94, use=gator, 10446 gator|HP 9000 model 237 emulating AAA, 10447 bw, km, mir, ul, 10448 cols#128, it#8, lines#47, 10449 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, 10450 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, 10451 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, 10452 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, 10453 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, 10454 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, 10455 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, 10456 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 10457 gator-52|HP 9000 model 237 emulating VT52, 10458 cols#128, lines#47, use=vt52-basic, 10459 gator-52t|HP 9000 model 237 emulating extra-tall VT52, 10460 lines#94, use=gator-52, 10461 10462 #### Honeywell-Bull 10463 # 10464 # From: Michael Haardt <michael (at] gandalf.moria> 11 Jan 93 10465 # 10466 10467 # Honeywell Bull terminal. Its cursor and function keys send single 10468 # control characters and it has standout/underline glitch. Most programs 10469 # do not like these features/bugs. Visual bell is realized by flashing the 10470 # "keyboard locked" LED. 10471 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, 10472 cols#80, lines#25, 10473 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X, 10474 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, 10475 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y, 10476 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n, 10477 dku7003|Honeywell Bull DKU 7003 all features described, 10478 msgr, 10479 xmc#1, 10480 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, 10481 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 10482 use=dku7003-dumb, 10483 10484 #### Lear-Siegler (LSI adm) 10485 # 10486 # These guys are long since out of the terminals business, but 10487 # in 1995 many current terminals still have an adm type as one of their 10488 # emulations (usually their stupidest, and usually labeled adm3, though 10489 # these `adm3' emulations normally have adm3a+ capabilities). 10490 # 10491 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a 10492 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') 10493 # was being held to ground would trigger a send of the top line on the screen. 10494 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 10495 # hanging in the air. (Thanks to Eric Fischer, <eric (at] fudge.uchicago.edu>, 10496 # for clearing up this point.) 10497 10498 adm1a|adm1|LSI adm1a, 10499 am, 10500 cols#80, lines#24, 10501 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 10502 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, 10503 ind=\n, 10504 adm2|LSI adm2, 10505 OTbs, am, 10506 cols#80, lines#24, 10507 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 10508 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10509 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n, 10510 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, 10511 # (adm3: removed obsolete ":ma=^K^P:" -- esr) 10512 adm3|LSI adm3, 10513 OTbs, am, 10514 cols#80, lines#24, 10515 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n, 10516 # The following ADM-3A switch settings are assumed for normal operation: 10517 # SPACE U/L_DISP CLR_SCRN 24_LINE 10518 # CUR_CTL LC_EN AUTO_NL FDX 10519 # Other switches may be set for operator convenience or communication 10520 # requirements. I recommend 10521 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF 10522 # ETX_OFF EOT_OFF 10523 # Most of these terminals required an option ROM to support lower case display. 10524 # Open the case and look at the motherboard; if you see an open 24-pin DIP 10525 # socket, you may be out of luck. 10526 # 10527 # (adm3a: some capabilities merged in from BRl entry -- esr) 10528 adm3a|LSI adm3a, 10529 OTbs, am, 10530 cols#80, lines#24, 10531 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H, 10532 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 10533 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, 10534 kcuu1=^K, rs2=^N, 10535 adm3a+|adm3a plus, 10536 kbs=^H, use=adm3a, 10537 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) 10538 adm5|LSI adm5, 10539 xmc#1, 10540 ed=\EY, el=\ET, khome=^^, rmso=\EG, smso=\EG, use=adm3a+, 10541 # A lot of terminals other than adm11s use these. Wherever you see 10542 # use=adm+sgr with some of its capabilities disabled, try the 10543 # disabled ones. They may well work but not have been documented or 10544 # expressed in the using entry. We'd like to cook up an <sgr> but the 10545 # <rmacs>/<smacs> sequences of the using entries vary too much. 10546 adm+sgr|adm style highlight capabilities, 10547 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, 10548 smso=\EG4, smul=\EG8, 10549 # LSI ADM-11 from George William Hartwig, Jr. <geo (at] BRL-TGR.ARPA> via BRL 10550 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs> 10551 # <khome> from <stephen%comp.lancs.ac.uk (at] ucl-cs.arpa>. <clear> could also 10552 # be ^Z, according to his entry. 10553 # (adm11: <smul>=\EG4 was obviously erroneous because it also said 10554 # <rev>=\EG4. Looking at other ADMs confirms this -- esr) 10555 adm11|LSI ADM-11, 10556 OTbs, am, hs, 10557 OTkn#8, cols#80, lines#24, 10558 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H, 10559 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 10560 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, 10561 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 10562 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 10563 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E), 10564 use=adm+sgr, 10565 # From: Andrew Scott Beals <bandy (at] lll-crg.ARPA> 10566 # Corrected by Olaf Siebert <rhialto (at] polder.ubc.kun.nl>, 11 May 1995 10567 # Supervisor mode info by Ari Wuolle, <awuolle (at] delta.hut.fi>, 27 Aug 1996 10568 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had 10569 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost> 10570 # via BRL. That entry asserted <xmc#1>, but I've left that out because 10571 # neither earlier nor later ADMSs have it -- esr) 10572 # 10573 # You will need to get into the supervisor setup before you can set 10574 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should 10575 # see a lot more setup options. 10576 # 10577 # While in supervisor setup you can also use following codes: 10578 # 10579 # Ctrl-P Personality character selections (configure for example what 10580 # arrow keys send, if I recall correctly) 10581 # Ctrl-T tabs 1-80 use left&right to move and up to set and 10582 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor 10583 # Ctrl-B Binary setup (probably not needed. I think that everything can 10584 # be set using normal setup) 10585 # Ctrl-A Answerback mode (enter answerback message) 10586 # Ctrl-U User friendly mode (normal setup) 10587 # Ctrl-D Defaults entire setup and function keys from EPROM tables 10588 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. 10589 # Ctrl-R Reads both setup and functions keys from NVM. 10590 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status 10591 # 10592 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to 10593 # RTS/CTS used nowadays with virtually every modem and computer. 19200 10594 # bps works fine with hardware flow control. 10595 # 10596 # The following null-modem cable should fix this and enable you to use 10597 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also 10598 # set ADM-12+ for DTR handshaking from supervisor setup. 10599 # 10600 # PC Serial ADM-12+ 10601 # -------- ------- 10602 # 2 - 3 10603 # 3 - 2 10604 # 4 - 5 10605 # 5 - 20 10606 # 6,8 - 4 10607 # 7 - 7 10608 # 20 - 6,8 10609 # 10610 adm12|LSI adm12, 10611 OTbs, OTpt, am, mir, 10612 OTug#1, cols#80, it#8, lines#24, 10613 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 10614 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10615 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 10616 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s 10617 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s 10618 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1, 10619 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 10620 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 10621 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, 10622 use=adm+sgr, 10623 # (adm20: removed obsolete ":kn#7:" -- esr) 10624 adm20|Lear Siegler adm20, 10625 OTbs, am, 10626 cols#80, it#8, lines#24, 10627 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L, 10628 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, 10629 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, 10630 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, 10631 sgr0=\E(, smso=\E), 10632 adm21|Lear Siegler adm21, 10633 xmc#1, 10634 dch1=\EW, dl1=\ER$<30*>, ed=\EY, el=\ET, ich1=\EQ, 10635 il1=\EE$<30*>, invis@, kbs=^H, khome=^^, use=adm+sgr, 10636 use=adm3a, 10637 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also, 10638 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; 10639 # removed bogus-looking \200 from before <cup>. -- esr) 10640 adm22|LSI adm22, 10641 OTbs, am, 10642 cols#80, lines#24, 10643 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 10644 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10645 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, 10646 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0 10647 \0\0\0\0, 10648 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 10649 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 10650 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 10651 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), 10652 # ADM 31 DIP Switches 10653 # 10654 # This information comes from two versions of the manual for the 10655 # Lear-Siegler ADM 31. 10656 # 10657 # Main board: 10658 # rear of case 10659 # +-||||-------------------------------------+ 10660 # + S1S2 ||S + 10661 # + ||3 + 10662 # + + 10663 # + ||S + 10664 # + ||4 + 10665 # + + 10666 # + + 10667 # + + 10668 # + + 10669 # + + 10670 # +-+ +-+ 10671 # + + 10672 # + S5 S6 S7 + 10673 # + == == == + 10674 # +----------------------------------------------+ 10675 # front of case (keyboard) 10676 # 10677 # S1 - Data Rate - Modem 10678 # S2 - Data Rate - Printer 10679 # ------------------------ 10680 # Data Rate Setting 10681 # ------------------- 10682 # 50 0 0 0 0 10683 # 75 1 0 0 0 10684 # 110 0 1 0 0 10685 # 134.5 1 1 0 0 10686 # 150 0 0 1 0 10687 # 300 1 0 1 0 10688 # 600 0 1 1 0 10689 # 1200 1 1 1 0 10690 # 1800 0 0 0 1 10691 # 2000 1 0 0 1 10692 # 2400 0 1 0 1 10693 # 3600 1 1 0 1 10694 # 4800 0 0 1 1 10695 # 7200 1 0 1 1 10696 # 9600 0 1 1 1 10697 # x 1 1 1 1 10698 # 10699 # S3 - Interface/Printer/Attributes 10700 # --------------------------------- 10701 # Printer Busy Control 10702 # sw1 sw2 sw3 10703 # --------------- 10704 # off off off Busy not active, CD disabled 10705 # off off on Busy not active, CD enabled 10706 # off on off Busy active on J5-20, CD disabled 10707 # on off off Busy active on J5-19, CD disabled - Factory Set. 10708 # on off on Busy active on J5-19, CD enabled 10709 # 10710 # sw4 Used in conjunction with S4 for comm interface control - Fact 0 10711 # 10712 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 10713 # 10714 # sw6 ON enables printer BUSY active LOW - Factory Setting 10715 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses 10716 # 10717 # sw7 ON - steady cursor - Factory Setting 10718 # OFF - blinking cursor 10719 # 10720 # sw8 ON causes selected attribute character to be displayed 10721 # OFF causes SPACE to be displayed instead - Factory Setting 10722 # 10723 # S4 - Interface 10724 # -------------- 10725 # Modem Interface 10726 # S3 S4 S4 S4 S4 10727 # sw4 sw1 sw2 sw3 sw4 10728 # --------------------------- 10729 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and 10730 # Current Loop disabled - Factory Setting 10731 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect 10732 # disabled 10733 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and 10734 # Current Loop Disabled 10735 # 10736 # sw5 ON disables dot stretching mode - Factory Setting 10737 # OFF enables dot stretching mode 10738 # sw6 ON enables blanking function 10739 # OFF enables underline function - Factory Setting 10740 # sw7 ON causes NULLS to be displayed as NULLS 10741 # OFF causes NULLS to be displayed as SPACES - Factory Setting 10742 # 10743 # S5 - Word Structure 10744 # ------------------- 10745 # sw1 ON enables BREAK key - Factory Setting 10746 # OFF disables BREAK key 10747 # sw2 ON selects 50Hz monitor refresh rate 10748 # OFF selects 60Hz monitor refresh rate - Factory Setting 10749 # 10750 # Modem Port Selection 10751 # sw3 sw4 sw5 10752 # --------------- 10753 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits 10754 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits 10755 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. 10756 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit 10757 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits 10758 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit 10759 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit 10760 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit 10761 # 10762 # sw6 ON sends bit 8 a 1 (mark) 10763 # OFF sends bit 8 as 0 (space) - Factory Setting 10764 # sw7 ON selects Block Mode 10765 # OFF selects Conversation Mode - Factory Setting 10766 # sw8 ON selects Full Duplex operation 10767 # OFF selects Half Duplex operation - Factory Setting 10768 # 10769 # S6 - Printer 10770 # ------------ 10771 # sw1, sw2, sw6, sw7 Reserved - Factory 0 10772 # 10773 # Printer Port Selection 10774 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0 10775 # 10776 # sw8 ON enables Printer Port 10777 # OFF disables Printer Port - Factory Setting 10778 # 10779 # S7 - Polling Address 10780 # -------------------- 10781 # sw1-7 Establish ASCII character which designates terminal polling address 10782 # ON = logic 0 10783 # OFF = logic 1 - Factory Setting 10784 # sw8 ON enables Polling Option 10785 # OFF disables Polling Option - Factory Setting 10786 # 10787 # 10788 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined. 10789 # 10790 # This adm31 entry uses underline as the standout mode. 10791 # If the adm31 gives you trouble with standout mode, check the DIP switch in 10792 # position 6, bank @c11, 25% from back end of the circuit board. Should be 10793 # OFF. If there is no such switch, you have an old adm31 and must use oadm31. 10794 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) 10795 adm31|LSI adm31 with sw6 set for underline mode, 10796 OTbs, am, mir, 10797 cols#80, lines#24, 10798 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 10799 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10800 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0, 10801 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 10802 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 10803 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, 10804 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, 10805 adm31-old|o31|old adm31, 10806 rmul@, smso=\EG4, smul@, use=adm31, 10807 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL 10808 adm36|LSI ADM36, 10809 OTbs, OTpt, 10810 OTkn#4, 10811 if=/usr/share/tabset/vt100, 10812 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd, 10813 # (adm42: removed obsolete ":ma=^K^P:" -- esr) 10814 adm42|LSI adm42, 10815 OTbs, am, 10816 cols#80, lines#24, 10817 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 10818 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 10819 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, 10820 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n, 10821 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@, 10822 smir=\Eq, smul@, use=adm+sgr, 10823 # The following termcap for the Lear Siegler ADM-42 leaves the 10824 # "system line" at the bottom of the screen blank (for those who 10825 # find it distracting otherwise) 10826 adm42-ns|LSI adm-42 with no system line, 10827 cbt=\EI\EF \011, clear=\E;\EF \011, 10828 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, 10829 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, 10830 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, 10831 smir=\Eq\EF \011, use=adm42, 10832 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. 10833 # The insert mode of this terminal is commented out because it's broken for our 10834 # purposes in that it will shift the position of every character on the page, 10835 # not just the cursor line! 10836 # From: Michael Driscoll <fenris (at] lightspeed.net> 10 July 1996 10837 adm1178|1178|LSI adm1178, 10838 am, 10839 cols#80, lines#24, xmc#1, 10840 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, 10841 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 10842 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 10843 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H, 10844 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0, 10845 sgr0=\E), smso=\EG4, smul=\EG1, 10846 10847 #### Prime 10848 # 10849 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings 10850 # <cummings (at] primerd.prime.com> on 14 Dec 1992 and lightly edited by esr. 10851 # Prime merged with ComputerVision in the late 1980s; you can reach them at: 10852 # 10853 # ComputerVision Services 10854 # 500 Old Connecticut Path 10855 # Framingham, Mass. 10856 # 10857 10858 # Standout mode is dim reverse-video. 10859 pt100|pt200|wren|fenix|Prime pt100/pt200, 10860 am, bw, mir, msgr, 10861 cols#80, it#8, lines#24, 10862 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H, 10863 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 10864 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, 10865 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, 10866 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, 10867 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D, 10868 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n, 10869 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, 10870 sgr0=\E[m, 10871 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12 10872 l\E[1Q, 10873 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, 10874 pt100w|pt200w|wrenw|fenixw|Prime pt100/pt200 in 132-column mode, 10875 cols#132, 10876 cup=\E[%i%p1%d;%p2%dH, use=pt100, 10877 pt250|Prime PT250, 10878 rmso@, smso@, use=pt100, 10879 pt250w|Prime PT250 in 132-column mode, 10880 rmso@, smso@, use=pt100w, 10881 10882 #### Qume (qvt) 10883 # 10884 # Qume, Inc. 10885 # 3475-A North 1st Street 10886 # San Jose CA 95134 10887 # Vox: (800)-457-4447 10888 # Fax: (408)-473-1510 10889 # Net: josed (at] techsupp.wyse.com (Jose D'Oliveira) 10890 # 10891 # Qume was bought by Wyse, but still (as of early 1995) has its own support 10892 # group and production division. 10893 # 10894 # Discontinued Qume models: 10895 # 10896 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ 10897 # built to replace them, and a qvt119+ which was a 101+ with available wide 10898 # mode (132 columns). There was a qvt103 which added VT100/VT131 emulations 10899 # and an ANSI-compatible qvt203 that replaced it. Qume started producing 10900 # ANSI-compatible terminals with the qvt323 and qvt61. 10901 # 10902 # Current Qume models (as of February 1995): 10903 # 10904 # All current Qume terminals have ANSI-compatible operation modes. 10905 # Qume is still producing the qvt62, which features emulations for other 10906 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is 10907 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal 10908 # with many emulations including Wyse370, Wyse 325, etc. Their newest 10909 # model is the qvt520, which is VT420-compatible. 10910 # 10911 # There are some ancient printing Qume terminals under `Daisy Wheel Printers' 10912 # 10913 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its 10914 # setup mode. Shift-s should be a configuration save to NVRAM. 10915 10916 qvt101|qvt108|Qume qvt 101 and QVT 108, 10917 xmc#1, use=qvt101+, 10918 10919 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap 10920 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked 10921 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E). 10922 # What seems to be going on here is that this entry was designed so that 10923 # the normal highlight is bold and standout is dim plus something else 10924 # (reverse-video maybe? But then, are there two <rev> sequences?) 10925 # 10926 # Added kdch1, kil1, kdl1 based on screenshot -TD: 10927 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg 10928 qvt101+|qvt101p|Qume qvt 101 PLUS product, 10929 am, bw, hs, ul, 10930 cols#80, lines#24, xmc#0, 10931 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n, 10932 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 10933 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 10934 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1, 10935 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H, 10936 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 10937 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, 10938 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 10939 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, 10940 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 10941 qvt102|Qume qvt 102, 10942 cnorm=\E., use=qvt101, 10943 # (qvt103: added <rmam>/<smam> based on init string -- esr) 10944 qvt103|Qume qvt 103, 10945 am, xenl, xon, 10946 cols#80, it#8, lines#24, vt#3, 10947 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 10948 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 10949 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 10950 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 10951 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 10952 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 10953 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 10954 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, 10955 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, 10956 rmso=\E[m$<2>, rmul=\E[m$<2>, 10957 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 10958 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 10959 %;m$<2>, 10960 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, 10961 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 10962 qvt103-w|Qume qvt103 132 cols, 10963 cols#132, lines#24, 10964 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, 10965 qvt119+|qvt119p|qvt119|Qume qvt 119 and 119PLUS terminals, 10966 am, hs, mir, msgr, 10967 cols#80, lines#24, xmc#0, 10968 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H, 10969 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 10970 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, 10971 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I, 10972 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX, 10973 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, 10974 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 10975 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 10976 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, 10977 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 10978 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, 10979 lines#25, use=qvt119+, 10980 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, 10981 cols#132, 10982 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, 10983 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, 10984 lines#25, use=qvt119+, 10985 qvt203|qvt203+|Qume qvt 203 Plus, 10986 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 10987 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 10988 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 10989 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, 10990 qvt203-w|qvt203-w-am|Qume qvt 203 PLUS in 132 cols (w/advanced video), 10991 cols#132, lines#24, 10992 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, 10993 # 10994 # Since a command is present for enabling 25 data lines, 10995 # a specific terminfo entry may be generated for the 203. 10996 # If one is desired for the QVT 119 PLUS then 25 lines must 10997 # be selected in the status line (setup line 9). 10998 # 10999 qvt203-25|QVT 203 PLUS with 25 by 80 column mode, 11000 cols#80, lines#25, 11001 is2=\E[=40h\E[?3l, use=qvt203, 11002 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, 11003 cols#132, lines#25, 11004 rs2=\E[?3h\E[=40h, use=qvt203, 11005 11006 #### TeleVideo (tvi) 11007 # 11008 # TeleVideo 11009 # 550 East Brokaw Road 11010 # PO Box 49048 95161 11011 # San Jose CA 95112 11012 # Vox: (408)-954-8333 11013 # Fax: (408)-954-0623 11014 # 11015 # 11016 # These require incredible amounts of padding. 11017 # 11018 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer 11019 # TeleVideo terminals are ANSI and PC-ANSI compatible. 11020 11021 tvi803|TeleVideo 803, 11022 clear=\E*$<10>, use=tvi950, 11023 11024 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 11025 # Switch settings are: 11026 # 11027 # S1 1 2 3 4 11028 # D D D D 9600 11029 # D D D U 50 11030 # D D U D 75 11031 # D D U U 110 11032 # D U D D 135 11033 # D U D U 150 11034 # D U U D 300 11035 # D U U U 600 11036 # U D D D 1200 11037 # U D D U 1800 11038 # U D U D 2400 11039 # U D U U 3600 11040 # U U D D 4800 11041 # U U D U 7200 11042 # U U U D 9600 11043 # U U U U 19200 11044 # 11045 # S1 5 6 7 8 11046 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored) 11047 # U D X U 7N2 11048 # U U D D 7O1 11049 # U U D U 7O2 11050 # U U U D 7E1 11051 # U U U U 7E2 11052 # D D X D 8N1 11053 # D D X U 8N2 11054 # D U D D 8O1 11055 # D U U U 8E2 11056 # 11057 # S1 9 Autowrap 11058 # U on 11059 # D off 11060 # 11061 # S1 10 CR/LF 11062 # U do CR/LF when CR received 11063 # D do CR when CR received 11064 # 11065 # S2 1 Mode 11066 # U block 11067 # D conversational 11068 # 11069 # S2 2 Duplex 11070 # U half 11071 # D full 11072 # 11073 # S2 3 Hertz 11074 # U 50 11075 # D 60 11076 # 11077 # S2 4 Edit mode 11078 # U local 11079 # D duplex 11080 # 11081 # S2 5 Cursor type 11082 # U underline 11083 # D block 11084 # 11085 # S2 6 Cursor down key 11086 # U send ^J 11087 # D send ^V 11088 # 11089 # S2 7 Screen colour 11090 # U green on black 11091 # D black on green 11092 # 11093 # S2 8 DSR status (pin 6) 11094 # U disconnected 11095 # D connected 11096 # 11097 # S2 9 DCD status (pin 8) 11098 # U disconnected 11099 # D duplex 11100 # 11101 # S2 10 DTR status (pin 20) 11102 # U disconnected 11103 # D duplex 11104 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>, 11105 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr) 11106 tvi910|TeleVideo model 910, 11107 OTbs, am, msgr, 11108 cols#80, it#8, lines#24, xmc#1, 11109 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 11110 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 11111 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I, 11112 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H, 11113 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, 11114 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 11115 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 11116 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 11117 # From: Alan R. Rogers <rogers%albany@csnet-relay> 11118 # as subsequently hacked over by someone at SCO 11119 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) 11120 # 11121 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care): 11122 # 11123 # S1 1 2 3 4: 11124 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110 11125 # D U D D 135 D U D U 150 D U U D 300 D U U U 600 11126 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 11127 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 11128 # 11129 # S1 5 6 7 8: 11130 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 11131 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 11132 # D U D D 8O1 D U U U 8E2 11133 # 11134 # S1 9 Autowrap (U = on, D = off) 11135 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) 11136 # S2 1 Mode (U = block, D = conversational) 11137 # S2 2 Duplex (U = half, D = full) 11138 # S2 3 Hertz (U = 50, D = 60) 11139 # S2 4 Edit mode (U = local, D = duplex) 11140 # S2 5 Cursor type (U = underline, D = block) 11141 # S2 6 Cursor down key (U = send ^J, D = send ^V) 11142 # S2 7 Screen colour (U = green on black, D = black on green) 11143 # S2 8 DSR status (pin 6) (U = disconnected, D = connected) 11144 # S2 9 DCD status (pin 8) (U = disconnected, D = connected) 11145 # S2 10 DTR status (pin 20) (U = disconnected, D = connected) 11146 # 11147 tvi910+|TeleVideo 910+, 11148 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, 11149 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, 11150 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, 11151 ll=\E=7\s, use=tvi910, 11152 11153 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and 11154 # <khome> from BRL entry -- esr) 11155 tvi912|tvi914|tvi920|TeleVideo 912/914/920 (old), 11156 OTbs, OTpt, am, msgr, 11157 cols#80, it#8, lines#24, xmc#1, 11158 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 11159 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 11160 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, 11161 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, 11162 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, 11163 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 11164 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 11165 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, 11166 tbc=\E3, 11167 # We got some new tvi912c terminals that act really weird on the regular 11168 # termcap, so one of our gurus worked this up. Seems that cursor 11169 # addressing is broken. 11170 tvi912cc|tvi912 at Cowell College, 11171 cup@, use=tvi912c, 11172 11173 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C 11174 # From: Benjamin C. W. Sittler 11175 # 11176 # Someone has put a scanned copy of the manual online at: 11177 # http://vt100.net/televideo/912b-om/ 11178 # (https://vt100.net/manx/details/6,5484) 11179 # 11180 # These terminals were produced ca. 1979, and had a 12" monochrome 11181 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit 11182 # ASCII, and were generally similar to adm3a but with attributes 11183 # (including some with magic cookies), fancy half-duplex mode, and 11184 # different bugs. 11185 # 11186 # Some operations require truly incredible amounts of padding. The 11187 # insert_line (<il1>) and delete_line (<dl1>) operations in particular 11188 # are so slow as to be nearly unusable. 11189 # 11190 # There may or may not have been a separate, earlier series of 912/920 11191 # terminals (without the "B" and "C" suffix); I have never seen one, 11192 # and the manual only describes the "B" and "C" series. The 912 and 920 11193 # are quite distinct from the 914 and 924, which were much nicer non- 11194 # magic-cookie terminals similar to the 950. 11195 # 11196 # This is a new description for the following TeleVideo terminals, 11197 # distinguished chiefly by their keyboards: 11198 # 11199 # TVI-912B - very odd layout, no function keys (84 keys) 11200 # TVI-920B - typewriter layout, no function keys (103 keys) 11201 # TVI-912C - very odd layout, function keys F1-F11 (82 keys) 11202 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys) 11203 # 11204 # To choose a setting for the TERM variable, start with the model: 11205 # 11206 # Model || base name 11207 # ----------||----------- 11208 # TVI-912B || tvi912b 11209 # TVI-912C || tvi912c 11210 # TVI-920B || tvi920b 11211 # TVI-920C || tvi920c 11212 # 11213 # Then add a suffix from the following table describing installed options 11214 # and how you'd like to use the terminal: 11215 # 11216 # Use Video | Second | Visual | Magic | Page || feature 11217 # Attributes | Page | Bell | Cookies | Print || suffix 11218 # ------------|--------|--------|---------|-------||--------- 11219 # No | No | N/A | N/A | No || -unk 11220 # No | No | N/A | N/A | Yes || -p 11221 # No | Yes | No | N/A | No || -2p-unk 11222 # No | Yes | No | N/A | Yes || -2p-p 11223 # No | Yes | Yes | N/A | No || -vb-unk 11224 # No | Yes | Yes | N/A | Yes || -vb-p 11225 # Yes | No | N/A | No | N/A || 11226 # Yes | No | N/A | Yes | N/A || -mc 11227 # Yes | Yes | No | No | N/A || -2p 11228 # Yes | Yes | No | Yes | N/A || -2p-mc 11229 # Yes | Yes | Yes | No | N/A || -vb 11230 # Yes | Yes | Yes | Yes | N/A || -vb-mc 11231 # 11232 # So e.g. a model 920 C with second page memory option, visual bell 11233 # and no magic cookies would be tvi920c-vb; a model 912 B without the 11234 # second page memory option and using magic cookies would be 11235 # tvi912b-mc 11236 # 11237 # PADDING 11238 # 11239 # At 9600 baud, the terminal is prone to overflow its input buffer 11240 # during complex operations (insert/delete 11241 # character/line/screen/page), and it does not signal this over the 11242 # RS232 cable. The typical symptom of an overrun is that the terminal 11243 # starts beeping, and output becomes garbled. 11244 # 11245 # The padding delays in this terminfo were derived using tack(1) 11246 # running on a Linux box connected to a TVI-920C with a later-model 11247 # (A49C1-style) ROM running at 9600 baud, so your mileage may 11248 # vary. The numbers below seem to give the terminal enough time so 11249 # that it doesn't overflow its input buffer and start losing 11250 # characters. 11251 # 11252 # KEYS 11253 # 11254 # If you want to use the FUNCT key on a tvi912[bc], use the 11255 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from 11256 # the following table (these also work on the 920 series): 11257 # 11258 # Unshifted Function Keys: 11259 # 11260 # Key | capname|| Equivalent 11261 # -----|--------||------------ 11262 # F1 | <kf1> || FUNCT + @ 11263 # F2 | <kf2> || FUNCT + A 11264 # F3 | <kf3> || FUNCT + B 11265 # F4 | <kf4> || FUNCT + C 11266 # F5 | <kf5> || FUNCT + D 11267 # F6 | <kf6> || FUNCT + E 11268 # F7 | <kf7> || FUNCT + F 11269 # F8 | <kf8> || FUNCT + G 11270 # F9 | <kf9> || FUNCT + H 11271 # F10 | <kf10> || FUNCT + I 11272 # F11 | <kf11> || FUNCT + J 11273 # 11274 # Shifted Function Keys: 11275 # 11276 # SHIFT + Key | capname|| Equivalent 11277 # -------------|--------||------------ 11278 # SHIFT + F1 | <kf12> || FUNCT + ` 11279 # SHIFT + F2 | <kf13> || FUNCT + a 11280 # SHIFT + F3 | <kf14> || FUNCT + b 11281 # SHIFT + F4 | <kf15> || FUNCT + c 11282 # SHIFT + F5 | <kf16> || FUNCT + d 11283 # SHIFT + F6 | <kf17> || FUNCT + e 11284 # SHIFT + F7 | <kf18> || FUNCT + f 11285 # SHIFT + F8 | <kf19> || FUNCT + g 11286 # SHIFT + F9 | <kf20> || FUNCT + h 11287 # SHIFT + F10 | <kf21> || FUNCT + i 11288 # SHIFT + F11 | <kf22> || FUNCT + j 11289 # 11290 # PORTS AND SWITCH SETTINGS 11291 # 11292 # Here are the switch settings for the TVI-912B/TVI-920B and 11293 # TVI-912C/TVI-920C: 11294 # 11295 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: 11296 # 2: 9600 3: 4800 4: 2400 5: 1200 11297 # 6: 600 7: 300 8: 150 9: 75 11298 # 10: 110 11299 # 11300 # S2 UART/Terminal options: 11301 # Up Down 11302 # 1: Not used Not allowed 11303 # 2: Alternate character set Standard character set 11304 # 3: Full duplex Half duplex 11305 # 4: 50 Hz refresh 60 Hz refresh 11306 # 5: No parity Send parity 11307 # 6: 2 stop bits 1 stop bit 11308 # 7: 8 data bits 7 data bits 11309 # 8: Not used Not allowed on Rev E or lower 11310 # 9: Even parity Odd parity 11311 # 10: Steady cursor Blinking cursor 11312 # (On Rev E or lower, use W25 instead of switch 10.) 11313 # 11314 # S5 UART/Terminal options: 11315 # Open Closed 11316 # 1: P3-6 Not connected DSR received on P3-6 11317 # 2: P3-8 Not connected DCD received on P3-8 11318 # 11319 # 3 Open, 4 Open: P3-20 Not connected 11320 # 3 Open, 4 Closed: DTR on when terminal is on 11321 # 3 Closed, 4 Open: DTR is connected to RTS 11322 # 3 Closed, 4 Closed: Not allowed 11323 # 11324 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off, 11325 # all data transmitted out of the modem port (P3) will also be 11326 # transmitted out of the printer port (P4). 11327 # 11328 # 6 Open, 7 Open: Not allowed 11329 # 6 Open, 7 Closed: 20ma current loop input 11330 # 6 Closed, 7 Open: RS232 input 11331 # 6 Closed, 7 Closed: Not allowed 11332 # 11333 # Jumper options: 11334 # If the jumper is installed, the effect will occur (the next time the terminal 11335 # is switched on). 11336 # 11337 # S4/W31: Enables automatic LF upon receipt of CR from 11338 # remote or keyboard. 11339 # S4/W32: Enables transmission of EOT at the end of Send. If not 11340 # installed, a carriage return is sent. 11341 # S4/W33: Disables automatic carriage return in column 80. 11342 # S4/W34: Selects Page Print Mode as initial condition. If not 11343 # installed, Extension Mode is selected. 11344 # 11345 # NON-STANDARD CAPABILITIES 11346 # 11347 # Sending <u9> or <u7> returns a cursor position report in the format 11348 # YX\r, where Y and X are as in <cup>. This format is described in 11349 # <u8> and <u6>, but it's not clear how one should write an 11350 # appropriate scanf string, since we need to subtract %' ' from the 11351 # character after reading it. The <u9> capability is used by tack(1) 11352 # to synchronize during padding tests, and seems to work for that 11353 # purpose. 11354 # 11355 # This description also includes the obsolete termcap capabilities 11356 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>). 11357 # 11358 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO 11359 # 11360 # The FUNCT modifier actually works with every normal key by sending 11361 # ^AX\r, where X is the sequence normally sent by that key. This is a 11362 # sort of meta key not currently describable in terminfo. 11363 # 11364 # There are quite a few other keys (especially on the 920 models,) but 11365 # they are for the most part only useful in block mode. 11366 # 11367 # These terminals have lots of forms manipulation features, mainly 11368 # useful in block mode, including "clear X to nulls" (vs. "clear X to 11369 # spaces"; nulls are sentinels for "send X" operations); "send X" 11370 # operations for uploading all or part of the screen; and block-mode 11371 # editing keys (they don't send escape sequences, but manipulate video 11372 # memory directly). Block mode is used for local editing, and protect 11373 # mode (in conjunction with the "write protect" attribute, 11374 # a.k.a. half-intensity outside of protect mode) is used to control 11375 # which parts of the screen are edited/sent/printed (by <mc0>). 11376 # 11377 # There are at least two major families of ROM, "early" and 11378 # A49B1/A49C1; the major difference seems to be that the latter ROMs 11379 # support a few extra escape sequences for manipulating the off-screen 11380 # memory page, and for sending whole pages back to the host (mainly 11381 # useful in block mode.) The descriptions in this file don't use any 11382 # of those sequences: set cursor position including page (\E-PYX, 11383 # where P is \s for page 0 and ! for page 1 [actually only the LSB of 11384 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are 11385 # as in <cup>); read cursor position (\E/), which is analogous to <u9> 11386 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX 11387 # are as in <cup>, and some "send page" features mainly useful for 11388 # forms manipulation. 11389 # 11390 # The keyboard enable (\E") and disable (\E#) sequences are unused, 11391 # except that a terminal reset (<is2>) enables the keyboard. 11392 # 11393 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) 11394 # enabled in <is2>, but auto-flip is very jarring so we don't use it. 11395 # 11396 # BUGS 11397 # 11398 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed 11399 # sequences (I infer that in some TeleVideo terminal they may invert 11400 # and uninvert the display) so the <flash> sequence given here is a 11401 # cheesy page-flip instead. 11402 # 11403 # The back_tab (<cbt>) sequence (\EI) doesn't work according to 11404 # tack(1), so it is not included in the descriptions below. 11405 # 11406 # It's not clear whether auto_left_margin (<bw>) flag should be set 11407 # for these terminals; tack says yes, so it is set here, but this 11408 # differs from other descriptions I've seen. 11409 # 11410 # Extension print mode (<mc5>) echoes all characters to the printer 11411 # port [in addition to displaying them] except for the page print mode 11412 # sequence (<mc4>); this is a slight violation of the terminfo 11413 # definition for <mc5> but I don't expect it to cause problems. We 11414 # reset to page print mode in <rs1> since it may have been enabled 11415 # accidentally. 11416 # 11417 # The descriptions with plus signs (+) are building blocks. 11418 11419 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), 11420 OTbs, OTpt, am, bw, 11421 cols#80, it#8, lines#24, 11422 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 11423 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, 11424 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, 11425 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, 11426 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, 11427 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n, 11428 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA, 11429 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, 11430 u7=\E?, u8=%c%c\r, u9=\E?, 11431 11432 # This isn't included in the basic capabilities because it is 11433 # typically unusable in combination with the full range of video 11434 # attributes, since the magic cookie attributes turn into ASCII 11435 # control characters, and the half-intensity ("protected") attribute 11436 # converts all affected characters to spaces. 11437 11438 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, 11439 mc0=\EP, 11440 11441 # This uses half-intensity mode (<dim>) for standout (<smso>), and 11442 # exposes no other attributes (half-intensity is the only attribute 11443 # that does not generate a magic cookie.) 11444 11445 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, 11446 msgr, 11447 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, 11448 smso=\E), 11449 11450 # Full magic-cookie attribute support, with half-intensity reverse 11451 # video for standout. Note that we add a space in the <dim> sequence 11452 # to give a consistent magic-cookie count. Also note that <sgr> uses 11453 # backspacing (in the TVI-supported order) to apply all requested 11454 # attributes with only a single magic cookie. 11455 11456 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, 11457 xmc#1, 11458 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, 11459 rmul=\Em, 11460 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%? 11461 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, 11462 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, 11463 11464 # This uses the second page memory option to save & restore screen 11465 # contents. If your terminal is missing the option, this description 11466 # should still work, but that has not been tested. 11467 11468 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, 11469 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, 11470 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, 11471 11472 # This simulates flashing by briefly toggling to the other page 11473 # (kludge!) 11474 11475 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, 11476 bel=\EK$<100>\EK, use=tvi912b+2p, 11477 11478 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>) 11479 11480 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, 11481 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, 11482 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, 11483 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, 11484 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 11485 kf8=^AG\r, kf9=^AH\r, 11486 11487 # Combinations of the basic building blocks 11488 11489 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), 11490 use=tvi912b+2p, use=tvi912b-unk, 11491 11492 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), 11493 use=tvi912b+vb, use=tvi912b-unk, 11494 11495 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), 11496 use=tvi912b+printer, use=tvi912b-unk, 11497 11498 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), 11499 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, 11500 11501 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), 11502 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, 11503 11504 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), 11505 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, 11506 11507 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), 11508 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, 11509 11510 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), 11511 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, 11512 11513 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), 11514 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, 11515 11516 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), 11517 use=tvi912b+dim, use=tvi912b-unk, 11518 11519 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), 11520 use=tvi912b+mc, use=tvi912b-unk, 11521 11522 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), 11523 use=tvi920b+fn, use=tvi912b-unk, 11524 11525 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), 11526 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, 11527 11528 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), 11529 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, 11530 11531 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), 11532 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, 11533 11534 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), 11535 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, 11536 use=tvi912b-unk, 11537 11538 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), 11539 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, 11540 use=tvi912b-unk, 11541 11542 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), 11543 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, 11544 use=tvi912b-unk, 11545 11546 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), 11547 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, 11548 use=tvi912b-unk, 11549 11550 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), 11551 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, 11552 use=tvi912b-unk, 11553 11554 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), 11555 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, 11556 use=tvi912b-unk, 11557 11558 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), 11559 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, 11560 11561 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), 11562 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, 11563 11564 # TeleVideo 921 and variants 11565 # From: Tim Theisen <tim (at] cs.wisc.edu> 22 Sept 1995 11566 # (tvi921: removed :ko=bt: before translation, I see no backtab cap; 11567 # also added empty <acsc> to suppress tic warning -- esr) 11568 tvi921|TeleVideo model 921 with sysline same as page & real vi function, 11569 OTbs, OTpt, am, hs, xenl, xhp, 11570 cols#80, lines#24, xmc#0, 11571 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L, 11572 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 11573 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 11574 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 11575 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@, 11576 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, 11577 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, 11578 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%, 11579 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, 11580 # without the beeper 11581 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap; 11582 # also added empty <acsc> to suppress tic warning -- esr) 11583 tvi92B|TeleVideo model 921 with sysline same as page & real vi function & no beeper, 11584 am, hs, xenl, xhp, 11585 cols#80, lines#24, xmc#0, 11586 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L, 11587 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 11588 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 11589 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, 11590 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, 11591 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, 11592 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 11593 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, 11594 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, 11595 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) 11596 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, 11597 dl1=\ER$<2*/>, il1=\EE$<2*/>, 11598 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, 11599 kil1=\EE$<2*/>, use=tvi92B, 11600 11601 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings 11602 # in from a BSD termcap file because it looks like they do something the 11603 # old ones skip -- esr) 11604 tvi924|TeleVideo tvi924, 11605 am, bw, hs, in, mir, msgr, xenl, xon, 11606 cols#80, it#8, lines#24, wsl#80, xmc#0, 11607 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, 11608 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, 11609 cub1=^H, cud1=^V, cuf1=^L, 11610 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, 11611 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, 11612 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, 11613 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, 11614 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, 11615 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 11616 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, 11617 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, 11618 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 11619 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 11620 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, 11621 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, 11622 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, 11623 use=adm+sgr, 11624 11625 # TVI925 DIP switches. In each of these, D = Down and U = Up, 11626 # 11627 # Here are the settings for the external (baud) switches (S1): 11628 # 11629 # Position Baud 11630 # 7 8 9 10 [Printer] 11631 # 1 2 3 4 [Main RS232] 11632 # ----------------------------------------------------- 11633 # D D D D 9600 11634 # D D D U 50 11635 # D D U D 75 11636 # D D U U 110 11637 # D U D D 135 11638 # D U D U 150 11639 # D U U D 300 11640 # D U U U 600 11641 # U D D D 1200 11642 # U D D U 1800 11643 # U D U D 2400 11644 # U D U U 3600 11645 # U U D D 4800 11646 # U U D U 7200 11647 # U U U D 9600 11648 # U U U U 19200 11649 # 11650 # 11651 # Settings for word length and stop-bits (S1) 11652 # 11653 # Position Description 11654 # 5 6 11655 # --------------------------- 11656 # U - 7-bit word 11657 # D - 8-bit word 11658 # - U 2 stop bits 11659 # - D 1 stop bit 11660 # 11661 # 11662 # S2 (external) settings 11663 # 11664 # Position Up Dn Description 11665 # -------------------------------------------- 11666 # 1 X Local edit 11667 # X Duplex edit (transmit editing keys) 11668 # -------------------------------------------- 11669 # 2 X 912/920 emulation 11670 # X 925 11671 # -------------------------------------------- 11672 # 3 X 11673 # 4 X No parity 11674 # 5 X 11675 # -------------------------------------------- 11676 # 3 X 11677 # 4 X Odd parity 11678 # 5 X 11679 # -------------------------------------------- 11680 # 3 X 11681 # 4 X Even parity 11682 # 5 X 11683 # -------------------------------------------- 11684 # 3 X 11685 # 4 X Mark parity 11686 # 5 X 11687 # -------------------------------------------- 11688 # 3 X 11689 # 4 X Space parity 11690 # 5 X 11691 # -------------------------------------------- 11692 # 6 X White on black display 11693 # X Black on white display 11694 # -------------------------------------------- 11695 # 7 X Half Duplex 11696 # 8 X 11697 # -------------------------------------------- 11698 # 7 X Full Duplex 11699 # 8 X 11700 # -------------------------------------------- 11701 # 7 X Block mode 11702 # 8 X 11703 # -------------------------------------------- 11704 # 9 X 50 Hz 11705 # X 60 Hz 11706 # -------------------------------------------- 11707 # 10 X CR/LF (Auto LF) 11708 # X CR only 11709 # 11710 # S3 (internal switch) settings: 11711 # 11712 # Position Up Dn Description 11713 # -------------------------------------------- 11714 # 1 X Keyclick off 11715 # X Keyclick on 11716 # -------------------------------------------- 11717 # 2 X English 11718 # 3 X 11719 # -------------------------------------------- 11720 # 2 X German 11721 # 3 X 11722 # -------------------------------------------- 11723 # 2 X French 11724 # 3 X 11725 # -------------------------------------------- 11726 # 2 X Spanish 11727 # 3 X 11728 # -------------------------------------------- 11729 # 4 X Blinking block cursor 11730 # 5 X 11731 # -------------------------------------------- 11732 # 4 X Blinking underline cursor 11733 # 5 X 11734 # -------------------------------------------- 11735 # 4 X Steady block cursor 11736 # 5 X 11737 # -------------------------------------------- 11738 # 4 X Steady underline cursor 11739 # 5 X 11740 # -------------------------------------------- 11741 # 6 X Screen blanking timer (ON) 11742 # X Screen blanking timer (OFF) 11743 # -------------------------------------------- 11744 # 7 X Page attributes 11745 # X Line attributes 11746 # -------------------------------------------- 11747 # 8 X DCD disconnected 11748 # X DCD connected 11749 # -------------------------------------------- 11750 # 9 X DSR disconnected 11751 # X DSR connected 11752 # -------------------------------------------- 11753 # 10 X DTR Disconnected 11754 # X DTR connected 11755 # -------------------------------------------- 11756 # 11757 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr) 11758 tvi925|TeleVideo 925, 11759 OTbs, am, bw, hs, ul, 11760 cols#80, lines#24, xmc#1, 11761 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V, 11762 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 11763 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 11764 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1, 11765 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z, 11766 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 11767 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 11768 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 11769 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, 11770 tsl=\Eh\Ef, use=adm+sgr, 11771 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL 11772 # to avoid "magic cookie" standout glitch: 11773 tvi925-hi|TeleVideo Model 925 with half intensity standout mode, 11774 xmc@, 11775 kcud1=\n, rmso=\E(, smso=\E), use=tvi925, 11776 11777 # From: Todd Litwin <litwin (at] litwin.jpl.nasa.gov> 28 May 1993 11778 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 11779 # for additional capabilities, 11780 # The following tvi descriptions from B:pjphar and virus!mike 11781 # is for all 950s. It sets the following attributes: 11782 # full duplex (\EDF) write protect off (\E() 11783 # conversation mode (\EC) graphics mode off (\E%) 11784 # white on black (\Ed) auto page flip off (\Ew) 11785 # turn off status line (\Eg) clear status line (\Ef\r) 11786 # normal video (\E0) monitor mode off (\EX or \Eu) 11787 # edit mode (\Er) load blank char to space (\Ee\040) 11788 # line edit mode (\EO) enable buffer control (^O) 11789 # protect mode off (\E\047) duplex edit keys (\El) 11790 # program unshifted send key to send line all (\E016) 11791 # program shifted send key to send line unprotected (\E004) 11792 # set the following to nulls: 11793 # field delimiter (\Ex0\200\200) 11794 # line delimiter (\Ex1\200\200) 11795 # start-protected field delimiter (\Ex2\200\200) 11796 # end-protected field delimiter (\Ex3\200\200) 11797 # set end of text delimiter to carriage return/null (\Ex4\r\200) 11798 # 11799 # TVI 950 Switch Setting Reference Charts 11800 # 11801 # TABLE 1: 11802 # 11803 # S1 1 2 3 4 5 6 7 8 9 10 11804 # +-----------------------+-----+-----+-----------------------+ 11805 # | Computer Baud Rate |Data |Stop | Printer Baud Rate | 11806 # | |Bits |Bits | | 11807 # +------+-----------------------+-----+-----+-----------------------+ 11808 # | Up | See | 7 | 2 | See | 11809 # +------+-----------------------+-----+-----+-----------------------+ 11810 # | Down | TABLE 2 | 8 | 1 | TABLE 2 | 11811 # +------+-----------------------+-----+-----+-----------------------+ 11812 # 11813 # 11814 # S2 1 2 3 4 5 6 7 8 9 10 11815 # +-----+-----+-----------------+-----+-----------+-----+-----+ 11816 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| 11817 # +------+-----+-----+-----------------+-----+-----------+-----+-----+ 11818 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off | 11819 # +------+-----+-----+-----------------+-----+-----------+-----+-----+ 11820 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | 11821 # +------+-----+-----+-----------------+-----+-----------+-----+-----+ 11822 # 11823 # TABLE 2: 11824 # 11825 # +-----------+-----+-----+-----+-----+-----------+ 11826 # | Display | 1 | 2 | 3 | 4 | Baud | 11827 # +-----------+-----+-----+-----+-----+ | 11828 # | Printer | 7 | 8 | 9 | 10 | Rate | 11829 # +-----------+-----+-----+-----+-----+-----------+ 11830 # | D | D | D | D | 9600 | 11831 # | U | D | D | D | 50 | 11832 # | D | U | D | D | 75 | 11833 # | U | U | D | D | 110 | 11834 # | D | D | U | D | 135 | 11835 # | U | D | U | D | 150 | 11836 # | D | U | U | D | 300 | 11837 # | U | U | U | D | 600 | 11838 # | D | D | D | U | 1200 | 11839 # | U | D | D | U | 1800 | 11840 # | D | U | D | U | 2400 | 11841 # | U | U | D | U | 3600 | 11842 # | D | D | U | U | 4800 | 11843 # | U | D | U | U | 7200 | 11844 # | D | U | U | U | 9600 | 11845 # | U | U | U | U | 19200 | 11846 # +-----+-----+-----+-----+-----------+ 11847 # 11848 # TABLE 3: 11849 # +-----+-----+-----+-----------+ 11850 # | 3 | 4 | 5 | Parity | 11851 # +-----+-----+-----+-----------+ 11852 # | X | X | D | None | 11853 # | D | D | U | Odd | 11854 # | D | U | U | Even | 11855 # | U | D | U | Mark | 11856 # | U | U | U | Space | 11857 # +-----+-----+-----+-----------+ 11858 # X = don't care 11859 # 11860 # CHART: 11861 # +-----+-----+-----------------+ 11862 # | 7 | 8 | Communication | 11863 # +-----+-----+-----------------+ 11864 # | D | D | Half Duplex | 11865 # | D | U | Full Duplex | 11866 # | U | D | Block | 11867 # | U | U | Local | 11868 # +-----+-----+-----------------+ 11869 # 11870 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". 11871 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> 11872 # should be present and all tvi native modes use the same string for this. 11873 # Finally, note that BSD has cud1=^V. -- esr) 11874 # 11875 # TVI 950 has 11 function-keys -TD 11876 tvi950|TeleVideo 950, 11877 OTbs, am, hs, mir, msgr, xenl, xon, 11878 cols#80, it#8, lines#24, xmc#1, 11879 acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*, 11880 cr=\r, cub1=^H, cud1=\n, cuf1=^L, 11881 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 11882 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, 11883 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n, 11884 invis@, 11885 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El 11886 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 11887 \Ef\r, 11888 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, 11889 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r, 11890 kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 11891 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 11892 khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, 11893 rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3, 11894 tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r, 11895 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r, 11896 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, 11897 # 11898 # is for 950 with two pages adds the following: 11899 # set 48 line page (\E\\2) 11900 # place cursor at page 0, line 24, column 1 (\E-07 ) 11901 # set local (no send) edit keys (\Ek) 11902 # 11903 # two page 950 adds the following: 11904 # when entering ex, set 24 line page (\E\\1) 11905 # when exiting ex, reset 48 line page (\E\\2) 11906 # place cursor at 0,24,1 (\E-07 ) 11907 # set duplex (send) edit keys (\El) when entering vi 11908 # set local (no send) edit keys (\Ek) when exiting vi 11909 # 11910 tvi950-2p|TeleVideo 950 w/2 pages, 11911 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek 11912 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 11913 \E\\2\E-07\s\011, 11914 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 11915 smkx=\El, use=tvi950, 11916 # 11917 # is for 950 with four pages adds the following: 11918 # set 96 line page (\E\\3) 11919 # place cursor at page 0, line 24, column 1 (\E-07 ) 11920 # 11921 # four page 950 adds the following: 11922 # when entering ex, set 24 line page (\E\\1) 11923 # when exiting ex, reset 96 line page (\E\\3) 11924 # place cursor at 0,24,1 (\E-07 ) 11925 # 11926 tvi950-4p|TeleVideo 950 w/4 pages, 11927 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek 11928 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 11929 \E\\3\E-07\s\011, 11930 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 11931 smkx=\El, use=tvi950, 11932 # 11933 # <is2> for reverse video 950 changes the following: 11934 # set reverse video (\Ed) 11935 # 11936 # set vb accordingly (\Ed ...delay... \Eb) 11937 # 11938 tvi950-rv|TeleVideo 950 rev video, 11939 flash=\Ed$<200/>\Eb, 11940 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El 11941 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r 11942 \0, 11943 use=tvi950, 11944 11945 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv 11946 tvi950-rv-2p|TeleVideo 950 rev video w/2 pages, 11947 flash=\Ed$<200/>\Eb, 11948 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek 11949 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 11950 \E\\2\E-07\s, 11951 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 11952 smkx=\El, use=tvi950, 11953 11954 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv 11955 tvi950-rv-4p|TeleVideo 950 rev video w/4 pages, 11956 flash=\Ed$<200/>\Eb, 11957 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek 11958 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0 11959 \E\\3\E-07\s, 11960 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 11961 smkx=\El, use=tvi950, 11962 # From: Andreas Stolcke <stolcke (at] icsi.berkeley.edu> 11963 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; 11964 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in 11965 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note 11966 # the :ko: string had :cl: in it, which means that one of the original 11967 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what 11968 # the 950 has. Finally, corrected the <kel> string to match the 950 and what 11969 # ko implies -- esr) 11970 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would 11971 # also work. 11972 tvi955|TeleVideo 955, 11973 mc5i, msgr@, 11974 xmc@, 11975 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, 11976 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, 11977 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, 11978 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, 11979 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%, 11980 rmam=\E[=7l, rmxon=^N, 11981 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0 11982 \Ef\r, 11983 sgr0=\EG0\E[=5l, smam=\E[=7h, smxon=^O, use=tvi950, 11984 tvi955-w|955-w|TeleVideo 955 w/132 cols, 11985 cols#132, 11986 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, 11987 # use half-intensity as normal mode, full intensity as <bold> 11988 tvi955-hb|955-hb|TeleVideo 955 half-bright, 11989 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, 11990 sgr0=\EG0\E[=5h, use=tvi955, 11991 # From: Humberto Appleton <beto (at] cs.utexas.edu>, 880521 UT Austin 11992 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m; 11993 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL. 11994 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what 11995 # it does to the function keys. I deduced <rmam>/<smam>. 11996 # also added empty <acsc> to suppress tic warning, -- esr) 11997 tvi970|TeleVideo 970, 11998 OTbs, OTpt, am, da, db, mir, msgr, 11999 cols#80, it#8, lines#24, 12000 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 12001 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 12002 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, 12003 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, 12004 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, 12005 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, 12006 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12007 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, 12008 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, 12009 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 12010 sgr0=\E[m, smacs=\E(B, smam=\E[?7l, 12011 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, 12012 smul=\E[4m, vpa=\E[%i%p1%dd, 12013 tvi970-vb|TeleVideo 970 with visual bell, 12014 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 12015 use=tvi970, 12016 tvi970-2p|TeleVideo 970 with using 2 pages of memory, 12017 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, 12018 use=tvi970, 12019 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars 12020 # per line (rather than 40), Esc K chooses the normal character set. Not sure 12021 # padding is needed, but adapted from the tvi920c termcap. The <smso> and 12022 # <smul> strings are klutzy, but at least use no screen space. 12023 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, 12024 # its absence means <smam>=\Ev isn't safe to use. -- esr) 12025 # From: Gene Rochlin <armsis (at] amber.berkeley.edu> 9/19/84. 12026 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says: 12027 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY. 12028 tvipt|TeleVideo personal terminal, 12029 OTbs, am, 12030 cols#80, lines#24, 12031 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, 12032 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, 12033 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, 12034 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n, 12035 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, 12036 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, 12037 # From: Nathan Peterson <nathan (at] sco.com>, 03 Sep 1996 12038 tvi9065|TeleVideo 9065, 12039 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, 12040 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, 12041 wnum#0, wsl#30, 12042 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, 12043 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, 12044 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 12045 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, 12046 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, 12047 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, 12048 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, 12049 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1, 12050 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, 12051 il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>, 12052 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, 12053 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, 12054 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 12055 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, 12056 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 12057 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, 12058 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n, 12059 pfkey=\E|%p1%{48}%+%c3%p2%s\031, 12060 pfloc=\E|%p1%{48}%+%c2%p2%s\031, 12061 pfx=\E|%p1%{48}%+%c1%p2%s\031, 12062 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, 12063 rep=\E[%p2%db%p1%c, rev=\EG4, 12064 rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%, 12065 rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0, 12066 rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N, 12067 rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, 12068 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1 12069 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[= 12070 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0 12071 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, 12072 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0 12073 \0\0, 12074 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%; 12075 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%? 12076 %p9%t\E$%e\E%%%;, 12077 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, 12078 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, 12079 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ecma+index, 12080 12081 #### Visual (vi) 12082 # 12083 # In September 1993, Visual Technology of Westboro, Massachusetts, 12084 # merged with White Pine Software of Nashua, New Hampshire. 12085 # 12086 # White Pine Software may be contacted at +1 603/886-9050. 12087 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com. 12088 # 12089 12090 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> 12091 # Recently I hacked together the following termcap for Visual 12092 # Technology's Visual 50 terminal. It's a slight modification of 12093 # the VT52 termcap. 12094 # It's intended to run when the Visual 50 is in VT52 emulation mode 12095 # (I know what you're thinking; if it's emulating a VT52, then why 12096 # another termcap? Well, it turns out that the Visual 50 can handle 12097 # <dl1> and db(?) among other things, which the VT52 can't) 12098 # The termcap works OK for the most part. The only problem is on 12099 # character inserts. The whole line gets painfully redrawn for each 12100 # character typed. Any suggestions? 12101 # Beau's entry is combined with the vi50 entry from University of Wisconsin. 12102 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in 12103 # disguise; <kf7>-<kf9> are really l1-l3. 12104 vi50|Visual 50, 12105 OTbs, OTpt, am, da, db, msgr, 12106 cols#80, it#8, lines#24, 12107 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H, 12108 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 12109 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, 12110 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, 12111 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, 12112 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, 12113 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, 12114 # this one was BSD & SCO's vi50 12115 vi50adm|Visual 50 in adm3a mode, 12116 am, msgr, 12117 cols#80, it#8, lines#24, 12118 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 12119 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, 12120 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H, 12121 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 12122 rmso=\ET, smso=\EU, 12123 # From: Jeff Siegal <jbs (at] quiotix.com> 12124 vi55|Visual 55, 12125 OTbs, am, mir, msgr, 12126 cols#80, it#8, lines#24, 12127 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, 12128 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 12129 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, 12130 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, 12131 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, 12132 smir=\Ea, smso=\EU, 12133 12134 # Visual 200 from BRL 12135 # The following switch settings are assumed for normal operation: 12136 # FULL_DUPLEX SCROLL CR 12137 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE 12138 # Other switches may be set for operator convenience or communication 12139 # requirements. 12140 # Character insertion is kludged in order to get around the "beep" misfeature. 12141 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr) 12142 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>, 12143 # and <dl1> strings, but we seem to get along fine without them. 12144 vi200|Visual 200, 12145 OTbs, OTpt, am, mir, msgr, 12146 OTkn#10, cols#80, it#8, lines#24, 12147 acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez, 12148 clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 12149 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed, 12150 dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I, 12151 hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev, 12152 kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 12153 kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q, 12154 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, 12155 kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL, 12156 krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG, 12157 rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, 12158 sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg, 12159 # The older Visuals didn't come with function keys. This entry uses 12160 # <smkx> and <rmkx> so that the keypad keys can be used as function keys. 12161 # If your version of vi doesn't support function keys you may want 12162 # to use vi200-f. 12163 vi200-f|Visual 200 no function keys, 12164 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, rmso@, smso@, use=vi200, 12165 vi200-rv|Visual 200 reverse video, 12166 cnorm@, cvvis@, ri@, use=vi200, 12167 12168 # the function keys are programmable but we don't reprogram them to their 12169 # default values with <is2> because programming them is very verbose. maybe 12170 # an initialization file should be made for the 300 and they could be stuck 12171 # in it. 12172 # (vi300: added <rmam>/<smam> based on init string -- esr) 12173 vi300|Visual 300 ANSI x3.64, 12174 am, bw, mir, xenl, 12175 cols#80, lines#24, 12176 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B, 12177 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 12178 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 12179 il1=\E[L, ind=\n, 12180 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, 12181 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12182 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, 12183 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, 12184 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, 12185 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 12186 smso=\E[1m, smul=\E[4m, 12187 # some of the vi300s have older firmware that has the command 12188 # sequence for setting editing extent reversed. 12189 vi300-old|Visual 300 with old firmware (set edit extent reversed), 12190 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300, 12191 12192 # Visual 500 prototype entry from University of Wisconsin. 12193 # The best place to look for the escape sequences is page A1-1 of the 12194 # Visual 500 manual. The initialization sequence given here may be 12195 # overkill, but it does leave out some of the initializations which can 12196 # be done with the menus in set-up mode. 12197 # The :xp: line below is so that emacs can understand the padding requirements 12198 # of this slow terminal. :xp: is 10 time the padding factor. 12199 # (vi500: removed unknown :xp#4: termcap; 12200 # also added empty <acsc> to suppress tic warning -- esr) 12201 vi500|Visual 500, 12202 am, mir, msgr, 12203 cols#80, it#8, lines#33, 12204 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r, 12205 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, 12206 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 12207 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, 12208 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, 12209 ind=\n, 12210 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, 12211 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 12212 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G, 12213 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, 12214 12215 # The visual 550 is a visual 300 with Tektronix graphics, 12216 # and with 33 lines. clear screen is modified here to 12217 # also clear the graphics. 12218 vi550|Visual 550 ANSI x3.64, 12219 lines#33, 12220 clear=\030\E[H\E[2J, use=vi300, 12221 12222 vi603|visual603|Visual 603, 12223 hs, mir, 12224 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 12225 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, 12226 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 12227 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, 12228 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, 12229 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 12230 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m, 12231 tsl=\EP2~, use=decid+cpr, use=vt100+4bsd, 12232 12233 #### Wyse (wy) 12234 # 12235 # Wyse Technology 12236 # 3471 North First Street 12237 # San Jose, CA 95134 12238 # Vox: (408)-473-1200 12239 # Fax: (408) 473-1222 12240 # Web: http://www.wyse.com 12241 # 12242 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at 12243 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the 12244 # obvious address, <http://www.wyse.com>. They keep terminfo entries at 12245 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm 12246 # 12247 # 12248 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. 12249 # They now own the Qume and Amdek brands, too. So these are the people to 12250 # talk with about all Link, Qume, and Amdek terminals. 12251 # 12252 # These entries include a few small fixes. 12253 # I canceled the bel capacities in the vb entries. 12254 # I made two trivial syntax fixes in the wyse30 entry. 12255 # I made some entries relative to adm+sgr. 12256 # 12257 # 12258 # Note: The wyse75, wyse85, and wyse99 have been discontinued. 12259 12260 # Although the Wyse 30 can support more than one attribute 12261 # it requires magic cookies to do so. Many applications do not 12262 # function well with magic cookies. The following terminfo uses 12263 # the protect mode to support one attribute (dim) without cookies. 12264 # If more than one attribute is needed then the wy30-mc terminfo 12265 # should be used. 12266 # 12267 wy30|wyse30|Wyse 30, 12268 am, bw, mc5i, mir, msgr, xon, 12269 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, 12270 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 12271 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H, 12272 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 12273 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, 12274 ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, home=^^, 12275 ht=\011$<1>, hts=\E1, il1=\EE$<2>, ind=\n$<2>, ip=$<2>, 12276 is2=\E'\E(\E\^3\E`9\016\024, kHOM=\E{, kbs=^H, kcbt=\EI, 12277 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 12278 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 12279 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 12280 khome=^^, kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, 12281 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, 12282 pfx=\Ez%p1%{63}%+%c%p2%s\177, 12283 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, 12284 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 12285 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 12286 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 12287 smso=\E`7\E), tbc=\E0, use=wyse+sl, 12288 # 12289 # This terminal description uses the non-hidden attribute mode 12290 # (with magic cookie). 12291 # 12292 # (wy30-mc: added <smcup> to suppress tic warning --esr) 12293 wy30-mc|wyse30-mc|Wyse 30 with magic cookies, 12294 msgr@, 12295 ma@, xmc#1, 12296 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, 12297 rmcup=\EG0, rmso=\EG0, 12298 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%? 12299 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8 12300 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 12301 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 12302 smso=\EG4, use=wy30, use=adm+sgr, 12303 # The mandatory pause used by <flash> does not work with 12304 # older versions of terminfo. If you see this effect then 12305 # unset xon and delete the / from the delay. 12306 # i.e. change $<100/> to $<100> 12307 wy30-vb|wyse30-vb|Wyse 30 visible bell, 12308 bel@, use=wy30, 12309 # 12310 # The Wyse 50 can support one attribute (e.g. Dim, Inverse, 12311 # Normal) without magic cookies by using the protect mode. 12312 # The following description uses this feature, but when more 12313 # than one attribute is put on the screen at once, all attributes 12314 # will be changed to be the same as the last attribute given. 12315 # The Wyse 50 can support more attributes when used with magic 12316 # cookies. The wy50-mc terminal description uses magic cookies 12317 # to correctly handle multiple attributes on a screen. 12318 # 12319 wy50|wyse50|Wyse 50, 12320 am, bw, mc5i, mir, msgr, xon, 12321 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, 12322 acsc=a;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, cbt=\EI, 12323 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H, 12324 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 12325 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, ed=\EY$<20>, 12326 el=\ET, flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1, 12327 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>, 12328 is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 12329 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 12330 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 12331 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 12332 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 12333 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 12334 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 12335 mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, 12336 pfx=\Ez%p1%{63}%+%c%p2%s\177, 12337 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), 12338 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 12339 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH 12340 \002%e\EH\003%;, 12341 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 12342 smso=\E`6\E), tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, 12343 kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r, 12344 kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, 12345 kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=wyse+sl, 12346 wyse+sl|status line for Wyse terminals, 12347 hs, 12348 wsl#45, 12349 dsl=\EF\r, fsl=\r, tsl=\EF, 12350 # 12351 # This terminal description uses the non-hidden attribute mode 12352 # (with magic cookie). 12353 # 12354 # The mandatory pause used by flash does not work with some 12355 # older versions of terminfo. If you see this effect then 12356 # unset <xon> and delete the / from the delay. 12357 # i.e. change $<100/> to $<100> 12358 # (wy50-mc: added <smcup> to suppress tic warning --esr) 12359 wy50-mc|wyse50-mc|Wyse 50 with magic cookies, 12360 msgr@, 12361 ma@, xmc#1, 12362 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, 12363 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, 12364 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%? 12365 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8 12366 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 12367 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 12368 smso=\EGt, use=wy50, use=adm+sgr, 12369 wy50-vb|wyse50-vb|Wyse 50 visible bell, 12370 bel@, use=wy50, 12371 wy50-w|wyse50-w|Wyse 50 132-column, 12372 cols#132, lw#7, nlab#16, wsl#97, 12373 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 12374 use=wy50, 12375 wy50-wvb|wyse50-wvb|Wyse 50 132-column visible bell, 12376 bel@, use=wy50-w, 12377 12378 # 12379 # The Wyse 350 is a Wyse 50 with color. 12380 # Unfortunately this means that it has magic cookies. 12381 # The color attributes are designed to overlap the reverse, dim and 12382 # underline attributes. This is nice for monochrome applications 12383 # because you can make underline stuff green (or any other color) 12384 # but for true color applications it's not so hot because you cannot 12385 # mix color with reverse, dim or underline. 12386 # To further complicate things one of the attributes must be 12387 # black (either the foreground or the background). In reverse video 12388 # the background changes color with black letters. In normal video 12389 # the foreground changes colors on a black background. 12390 # This terminfo uses some of the more advanced features of curses 12391 # to display both color and blink. In the final analysis I am not 12392 # sure that the wy350 runs better with this terminfo than it does 12393 # with the wy50 terminfo (with user adjusted colors). 12394 # 12395 # The mandatory pause used by flash does not work with 12396 # older versions of terminfo. If you see this effect then 12397 # unset xon and delete the / from the delay. 12398 # i.e. change $<100/> to $<100> 12399 # 12400 # Bug: The <op> capability resets attributes. 12401 wy350|wyse350|Wyse 350, 12402 am, bw, mc5i, mir, xon, 12403 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, 12404 xmc#1, 12405 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 12406 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, 12407 cub1=^H, cud1=\n, cuf1=^L, 12408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, 12409 dim=\EGp, dl1=\ER, ed=\EY$<20>, el=\ET, 12410 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1, il1=\EE, 12411 ind=\n$<2>, ip=$<1>, is1=\E`:\E`9$<30>, 12412 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, 12413 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 12414 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 12415 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 12416 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 12417 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 12418 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 12419 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0, 12420 pfx=\Ez%p1%{63}%+%c%p2%s\177, 12421 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, 12422 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, 12423 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e 12424 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e 12425 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48} 12426 %+%c, 12427 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0} 12428 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t 12429 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH 12430 \002%e\EH\003%;, 12431 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, 12432 smir=\Eq, smln=\EA10, tbc=\E0, use=adm+sgr, use=wyse+sl, 12433 wy350-vb|wyse350-vb|Wyse 350 visible bell, 12434 bel@, use=wy350, 12435 wy350-w|wyse350-w|Wyse 350 132-column, 12436 cols#132, lw#7, nlab#16, wsl#97, 12437 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 12438 use=wy350, 12439 wy350-wvb|wyse350-wvb|Wyse 350 132-column visible bell, 12440 bel@, use=wy350-w, 12441 # 12442 # This terminfo description is untested. 12443 # The wyse100 emulates an adm31, so the adm31 entry should work. 12444 # 12445 wy100|Wyse 100, 12446 hs, mir, 12447 cols#80, lines#24, xmc#1, 12448 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 12449 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 12450 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n, 12451 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, 12452 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 12453 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, 12454 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, 12455 # 12456 # The Wyse 120/150 has most of the features of the Wyse 60. 12457 # This terminal does not need padding up to 9600 baud! 12458 # <msgr> should be set but the clear screen fails when in 12459 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 12460 # then set <msgr>. 12461 # 12462 wy120|wyse120|wy150|wyse150|Wyse 120/150, 12463 am, bw, km, mc5i, mir, msgr, xon, 12464 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, 12465 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 12466 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 12467 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 12468 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 12469 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>, 12470 flash=\E`8$<100/>\E`9, home=^^, ht=\011$<1>, hts=\E1, 12471 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 12472 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016 12473 \024\El, 12474 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 12475 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 12476 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 12477 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 12478 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 12479 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 12480 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 12481 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 12482 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 12483 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 12484 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 12485 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, 12486 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>, 12487 rs3=\EwG\Ee($<100>, 12488 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} 12489 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t 12490 %{64}%|%;%?%p7%t%{1}%|%;%c, 12491 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 12492 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 12493 tbc=\E0, use=adm+sgr, use=wyse+sl, 12494 # 12495 wy120-w|wyse120-w|wy150-w|wyse150-w|Wyse 120/150 132-column, 12496 cols#132, lw#7, nlab#16, wsl#97, 12497 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 12498 rs2=\E`;$<70>, use=wy120, 12499 # 12500 wy120-25|wyse120-25|wy150-25|wyse150-25|Wyse 120/150 80-column 25-lines, 12501 lh@, lines#25, lw@, nlab@, 12502 pln@, rs3=\EwG\Ee)$<100>, use=wy120, 12503 # 12504 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|Wyse 120/150 132-column 25-lines, 12505 lh@, lines#25, lw@, nlab@, 12506 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, 12507 # 12508 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, 12509 bel@, use=wy120, 12510 # 12511 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, 12512 bel@, use=wy120-w, 12513 # 12514 # The Wyse 60 is like the Wyse 50 but with more padding. 12515 # The reset strings are slow and the pad times very depending 12516 # on other parameters such as font loading. I have tried 12517 # to follow the following outline: 12518 # 12519 # <rs1> -> set personality 12520 # <rs2> -> set number of columns 12521 # <rs3> -> set number of lines 12522 # <is1> -> select the proper font 12523 # <is2> -> do the initialization 12524 # <is3> -> set up display memory (2 pages) 12525 # 12526 # The Wyse 60's that have VT100 emulation are slower than the 12527 # older Wyse 60's. This change happened mid-1987. 12528 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri> 12529 # 12530 # The meta key is only half right. This terminal will return the 12531 # high order bit set when you hit CTRL-function_key 12532 # 12533 # It may be useful to assign two function keys with the 12534 # values \E=(\s look at old data in page 1 12535 # \E=W, look at bottom of page 1 12536 # where \s is a space ( ). 12537 # 12538 # Note: 12539 # The Wyse 60 runs faster when the XON/XOFF 12540 # handshake is turned off. 12541 # 12542 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid 12543 # a bug reported by Robert Dunn, <rcdii (at] inlink.com> -- esr) 12544 wy60|wyse60|Wyse 60, 12545 am, bw, km, mc5i, mir, msgr, 12546 cols#80, lh#1, lines#24, lw#8, nlab#8, 12547 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 12548 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, 12549 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 12550 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 12551 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, 12552 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, home=\E{, 12553 ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, ip=$<3>, 12554 is1=\EcB0\EcC1, 12555 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016 12556 \024\El, 12557 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 12558 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 12559 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 12560 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 12561 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 12562 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 12563 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 12564 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 12565 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 12566 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 12567 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 12568 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, 12569 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, 12570 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, 12571 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} 12572 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t 12573 %{64}%|%;%?%p7%t%{1}%|%;%c, 12574 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 12575 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 12576 tbc=\E0, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF12=^Ak\r, 12577 kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r, kF2=^Aa\r, 12578 kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r, 12579 kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr, use=wyse+sl, 12580 # 12581 wy60-w|wyse60-w|Wyse 60 132-column, 12582 cols#132, lw#7, nlab#16, wsl#97, 12583 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, 12584 rs2=\EeF$<150>\E`;$<150>, use=wy60, 12585 # 12586 wy60-25|wyse60-25|Wyse 60 80-column 25-lines, 12587 lh@, lines#25, lw@, nlab@, 12588 pln@, rs3=\EwG\Ee)$<200>, use=wy60, 12589 wy60-25-w|wyse60-25-w|Wyse 60 132-column 25-lines, 12590 lh@, lines#25, lw@, nlab@, 12591 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, 12592 # 12593 wy60-42|wyse60-42|Wyse 60 80-column 42-lines, 12594 lines#42, 12595 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, 12596 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, 12597 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, 12598 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, 12599 wy60-42-w|wyse60-42-w|Wyse 60 132-column 42-lines, 12600 cols#132, lw#7, nlab#16, wsl#97, 12601 cup=\Ea%i%p1%dR%p2%dC$<2>, dch1=\EW$<19>, 12602 home=\036$<2>, ip=$<6>, nel=\r\n$<11>, 12603 rs2=\EeF$<150>\E`;$<150>, use=wy60-42, 12604 # 12605 wy60-43|wyse60-43|Wyse 60 80-column 43-lines, 12606 lh@, lines#43, lw@, nlab@, 12607 pln@, rs3=\Ee+$<150>, use=wy60-42, 12608 wy60-43-w|wyse60-43-w|Wyse 60 132-column 43-lines, 12609 lh@, lines#43, lw@, nlab@, 12610 pln@, rs3=\Ee+$<150>, use=wy60-42-w, 12611 # 12612 wy60-vb|wyse60-vb|Wyse 60 visible bell, 12613 bel@, use=wy60, 12614 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, 12615 bel@, use=wy60-w, 12616 12617 # The Wyse-99GT looks at lot like the Wyse 60 except that it 12618 # does not have the 42/43 line mode. In the Wyse-60 the "lines" 12619 # setup parameter controls the number of lines on the screen. 12620 # For the Wyse 99GT the "lines" setup parameter controls the 12621 # number of lines in a page. The screen can display 25 lines max. 12622 # The Wyse-99GT also has personalities for the VT220 and 12623 # Tektronix 4014. But this has no bearing on the native mode. 12624 # 12625 # (msgr) should be set but the clear screen fails when in 12626 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 12627 # then set msgr, else use msgr@. 12628 # 12629 # u0 -> enter Tektronix mode 12630 # u1 -> exit Tektronix mode 12631 # 12632 wy99gt|wyse99gt|Wyse 99gt, 12633 msgr@, 12634 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, 12635 el=\Et$<5>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, 12636 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`:$<150>, smcup=\Ew1, 12637 u0=\E~>\E8, u1=\E[42h, use=wy60, 12638 # 12639 wy99gt-w|wyse99gt-w|Wyse 99gt 132-column, 12640 cols#132, lw#7, nlab#16, wsl#97, 12641 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, 12642 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, 12643 use=wy99gt, 12644 # 12645 wy99gt-25|wyse99gt-25|Wyse 99gt 80-column 25-lines, 12646 lh@, lines#25, lw@, nlab@, 12647 pln@, rs3=\EwG\Ee)$<200>, use=wy99gt, 12648 # 12649 wy99gt-25-w|wyse99gt-25-w|Wyse 99gt 132-column 25-lines, 12650 lh@, lines#25, lw@, nlab@, 12651 pln@, rs2=\E`;$<150>, use=wy99gt-w, 12652 # 12653 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, 12654 bel@, use=wy99gt, 12655 # 12656 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, 12657 bel@, use=wy99gt-w, 12658 12659 # Can't set tabs! Other bugs (ANSI mode only): 12660 # - can't redefine function keys (anyway, key redefinition in ANSI mode 12661 # is too much complex to be described); 12662 # - meta key can't be described (the terminal forgets it when reset); 12663 # The xon-xoff handshaking can't be disabled while in ANSI personality, so 12664 # emacs can't work at speed greater than 9600 baud. No padding is needed at 12665 # this speed. 12666 # dch1 has been commented out because it causes annoying glittering when 12667 # vi deletes one character at the beginning of a line with tabs in it. 12668 # dch makes sysgen(1M) have a horrible behaviour when deleting 12669 # a screen and makes screen(1) behave badly, so it is disabled too. The nice 12670 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are 12671 # not, so smir and rmir are commented out as well. 12672 # From: Francesco Potorti` <F.Potorti (at] cnuce.cnr.it>, 24 Aug 1998 12673 wy99-ansi|Wyse WY-99GT in ANSI mode (int'l PC keyboard), 12674 am, km, mc5i, mir, msgr, xenl, 12675 cols#80, it#8, lines#25, vt#3, 12676 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, 12677 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 12678 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r, 12679 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, 12680 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, 12681 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, 12682 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 12683 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 12684 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, 12685 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, 12686 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 12687 il1=\E[L, ind=\n$<1>, invis=\E[8m, 12688 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4 12689 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, 12690 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 12691 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 12692 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, 12693 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, 12694 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 12695 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, 12696 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, 12697 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 12698 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, 12699 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16 12700 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E 12701 \E[4i, 12702 sc=\E7, 12703 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%? 12704 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, 12705 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, 12706 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 12707 12708 # This is the american terminal. Here tabs work fine. 12709 # From: Francesco Potorti` <F.Potorti (at] cnuce.cnr.it>, 24 Aug 1998 12710 wy99a-ansi|Wyse WY-99GT in ANSI mode (US PC keyboard), 12711 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, 12712 12713 # This terminal (firmware version 02) has a lot of bugs: 12714 # - can't set tabs; 12715 # - other bugs in ANSI modes (see above). 12716 # This description disables handshaking when using cup. This is because 12717 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal 12718 # cannot be used at speeds greater than 9600 baud, because at greater 12719 # speeds handshaking is needed even for character sending. If you use 12720 # DTR handshaking, you can use even greater speeds. 12721 # From: Francesco Potorti` <F.Potorti (at] cnuce.cnr.it>, 24 Aug 1998 12722 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), 12723 am, bw, km, mc5i, mir, msgr, xon, 12724 cols#80, it#8, lines#25, 12725 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, 12726 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, 12727 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L, 12728 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 12729 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, ed=\EY$<8*>, 12730 el=\ET$<8>, enacs=\Ec@1J$<2000>, 12731 flash=\E\^1$<30/>\E\^0, home=^^, ht=^I, il1=\EE, ind=\n, 12732 invis=\EG3, 12733 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E 12734 \^0\E`1\E`4\Ee.\E`:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee" 12735 \EcD\024, 12736 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, 12737 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, 12738 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, 12739 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, 12740 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, 12741 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 12742 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, 12743 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., 12744 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, 12745 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E` 12746 9\E\^0\E`1\E`4\Ee.\E`:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/ 12747 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, 12748 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t 12749 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%? 12750 %p9%t\EcE%e\EcD%;, 12751 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, 12752 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, use=wyse+sl, 12753 12754 # This is the american terminal. Here tabs work. 12755 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 12756 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), 12757 hts=\E1, tbc=\E0, use=wy99f, 12758 12759 # 12760 # The Wyse 160 is combination of the WY-60 and the WY-99gt. 12761 # The reset strings are slow and the pad times very depending 12762 # on other parameters such as font loading. I have tried 12763 # to follow the following outline: 12764 # 12765 # <rs1> -> set personality 12766 # <rs2> -> set number of columns 12767 # <rs3> -> set number of lines 12768 # <is1> -> select the proper font 12769 # <is2> -> do the initialization 12770 # <is3> -> set up display memory (2 pages) 12771 # 12772 # The display memory may be used for either text or graphics. 12773 # When "Display Memory = Shared" the terminal will have more pages 12774 # but garbage may be left on the screen when you switch from 12775 # graphics to text. If "Display Memory = Unshared" then the 12776 # text area will be only one page long. 12777 # 12778 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid 12779 # a bug reported by Robert Dunn, <rcdii (at] inlink.com> -- esr) 12780 wy160|wyse160|Wyse 160, 12781 am, bw, km, mc5i, mir, msgr, 12782 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, 12783 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 12784 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, 12785 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 12786 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, 12787 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, ed=\EY$<30>, el=\ET$<5>, 12788 flash=\E`8$<100/>\E`9, home=\E{, ht=^I, hts=\E1, 12789 il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, 12790 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016 12791 \024\El, 12792 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 12793 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 12794 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 12795 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 12796 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 12797 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 12798 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 12799 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, 12800 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 12801 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 12802 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, 12803 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, 12804 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, 12805 rs2=\E`:$<100>, rs3=\EwG\Ee($<140>, 12806 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} 12807 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t 12808 %{64}%|%;%?%p7%t%{1}%|%;%c, 12809 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 12810 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 12811 tbc=\E0, use=adm+sgr, use=wyse+sl, 12812 # 12813 wy160-w|wyse160-w|Wyse 160 132-column, 12814 cols#132, lw#7, nlab#16, wsl#90, 12815 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, 12816 rs2=\EeF$<150>\E`;$<150>, use=wy160, 12817 # 12818 wy160-25|wyse160-25|Wyse 160 80-column 25-lines, 12819 lh@, lines#25, lw@, nlab@, 12820 pln@, rs3=\EwG\Ee)$<200>, use=wy160, 12821 wy160-25-w|wyse160-25-w|Wyse 160 132-column 25-lines, 12822 lh@, lines#25, lw@, nlab@, 12823 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, 12824 # 12825 wy160-42|wyse160-42|Wyse 160 80-column 42-lines, 12826 lines#42, 12827 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, 12828 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, 12829 rs3=\Ee*$<150>, use=wy160, 12830 wy160-42-w|wyse160-42-w|Wyse 160 132-column 42-lines, 12831 cols#132, lw#7, nlab#16, wsl#90, 12832 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, 12833 rs2=\EeF$<150>\E`;$<150>, use=wy160-42, 12834 # 12835 wy160-43|wyse160-43|Wyse 160 80-column 43-lines, 12836 lh@, lines#43, lw@, nlab@, 12837 pln@, rs3=\Ee+$<150>, use=wy160-42, 12838 wy160-43-w|wyse160-43-w|Wyse 160 132-column 43-lines, 12839 lh@, lines#43, lw@, nlab@, 12840 pln@, rs3=\Ee+$<150>, use=wy160-42-w, 12841 # 12842 wy160-vb|wyse160-vb|Wyse 160 visible bell, 12843 bel@, use=wy160, 12844 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, 12845 bel@, use=wy160-w, 12846 # 12847 # The Wyse 75 is a VT100 lookalike without advanced video. 12848 # 12849 # The Wyse 75 can support one attribute (e.g. Dim, Inverse, 12850 # Underline) without magic cookies. The following description 12851 # uses this capability, but when more than one attribute is 12852 # put on the screen at once, all attributes will be changed 12853 # to be the same as the last attribute given. 12854 # The Wyse 75 can support more attributes when used with magic 12855 # cookies. The wy75-mc terminal description uses magic cookies 12856 # to correctly handle multiple attributes on a screen. 12857 # 12858 wy75|wyse75|Wyse 75, 12859 am, hs, mc5i, mir, msgr, xenl, xon, 12860 cols#80, lines#24, ma#1, pb#1201, wsl#78, 12861 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 12862 bel=^G, cbt=\E[Z, clear=\E[H\E[J$<30>, cr=\r, 12863 csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H, 12864 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 12865 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12866 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m, 12867 dl=\E[%p1%dM$<1*>, dl1=\E[M, 12868 dsl=\E[>\,\001\001\E[>-\001\001, ech=\E[%p1%dX, 12869 ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0, 12870 flash=\E[30h\E\,$<250/>\E[30l, fsl=^A, home=\E[H, 12871 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>, 12872 il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>, 12873 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, 12874 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, 12875 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, 12876 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 12877 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 12878 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, 12879 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, 12880 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 12881 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, 12882 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, 12883 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, 12884 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, 12885 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, 12886 sc=\E7, 12887 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t 12888 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t 12889 \016%e\017%;, 12890 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 12891 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, 12892 tbc=\E[3g, tsl=\E[>\,\001, use=decid+cpr, use=vt220+cvis, 12893 use=vt220+keypad, 12894 # 12895 # This terminal description uses the non-hidden attribute mode 12896 # (with magic cookie). 12897 # 12898 wy75-mc|wyse75-mc|Wyse 75 with magic cookies, 12899 msgr@, 12900 ma@, xmc#1, 12901 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, 12902 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, 12903 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%? 12904 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9 12905 %t\016%e\017%;, 12906 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, 12907 use=wy75, 12908 wy75-vb|wyse75-vb|Wyse 75 with visible bell, 12909 pb@, 12910 bel@, use=wy75, 12911 wy75-w|wyse75-w|Wyse 75 in 132 column mode, 12912 cols#132, wsl#130, 12913 rs2=\E[35h\E[?3h$<80>, use=wy75, 12914 wy75-wvb|wyse75-wvb|Wyse 75 with visible bell 132 columns, 12915 pb@, 12916 bel@, use=wy75-w, 12917 # 12918 # Wyse 85 emulating a VT220 7 bit mode. 12919 # 24 line screen with status line. 12920 # 12921 # The VT220 mode permits more function keys but it wipes out 12922 # the escape key. I strongly recommend that <f11> be set to 12923 # escape (esc). 12924 # The terminal may have to be set for 8 data bits and 2 stop 12925 # bits for the arrow keys to work. 12926 # The Wyse 85 runs faster with XON/XOFF enabled. Also the 12927 # <dch> and <ich> work best when XON/XOFF is set. <ich> and 12928 # <dch> leave trash on the screen when used without XON/XOFF. 12929 # 12930 wy85|wyse85|Wyse 85, 12931 am, hs, mc5i, mir, msgr, xenl, xon, 12932 cols#80, it#8, lines#24, wsl#80, 12933 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 12934 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12935 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 12936 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 12937 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>, 12938 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 12939 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>, 12940 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>, 12941 el=\E[K$<1>, el1=\E[1K, enacs=\E)0, 12942 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8, 12943 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>, 12944 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m, 12945 ip=$<3>, is1=\E[62;1"p\E[?5W, 12946 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 12947 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 12948 kcuf1=\E[C, kcuu1=\E[A, kf10=\E[21~, kf11=\E[23~, 12949 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 12950 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 12951 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 12952 kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, 12953 lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, 12954 rev=\E[7m, ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 12955 rmkx=\E>, rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p, 12956 rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7, 12957 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? 12958 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 12959 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 12960 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 12961 tsl=\E[40h\E7\E[25;%i%p1%dH, use=decid+cpr, 12962 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad, 12963 # 12964 # Wyse 85 with visual bell. 12965 wy85-vb|wyse85-vb|Wyse 85 with visible bell, 12966 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85, 12967 # 12968 # Wyse 85 in 132-column mode. 12969 wy85-w|wyse85-w|Wyse 85 in 132-column mode, 12970 cols#132, wsl#132, 12971 rs2=\E[35h$<70/>\E[?3h, use=wy85, 12972 # 12973 # Wyse 85 in 132-column mode with visual bell. 12974 wy85-wvb|wyse85-wvb|Wyse 85 with visible bell 132-columns, 12975 bel@, use=wy85-w, 12976 12977 # From: Kevin Turner <kevint (at] aracnet.com>, 12 Jul 1998 12978 # This copes with an apparent firmware bug in the wy85. He writes: 12979 # "What I did was change leave the terminal cursor keys set to Normal 12980 # (instead of application), and change \E[ to \233 for all the keys in 12981 # terminfo. At one point, I found some reference indicating that this 12982 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just 12983 # me), but I can't find that and the server under my bookmark to "Wyse 12984 # Technical" isn't responding. So there's the question of whether the wy85 12985 # terminfo should reflect the manufacturer's intended behaviour of the terminal 12986 # or the actual." 12987 wy85-8bit|wyse85-8bit|Wyse 85 in 8-bit mode, 12988 am, hs, mc5i, mir, msgr, xenl, xon, 12989 cols#80, it#8, lines#24, wsl#80, 12990 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 12991 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12992 clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 12993 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 12994 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>, 12995 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 12996 dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>, 12997 dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>, 12998 el=\E[K$<1>, el1=\E[1K, enacs=\E)0, 12999 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8, 13000 home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>, 13001 il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m, 13002 ip=$<3>, is1=\E[62;1"p\E[?5W, 13003 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 13004 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 13005 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, 13006 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, 13007 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 13008 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, 13009 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, 13010 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, 13011 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, 13012 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, 13013 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 13014 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 13015 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 13016 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 13017 rs3=\E[?5l, sc=\E7, 13018 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? 13019 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, 13020 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 13021 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 13022 tsl=\E[40h\E7\E[25;%i%p1%dH, use=decid+cpr, 13023 use=vt220+cvis, 13024 # 13025 # Wyse 185 emulating a VT320 7 bit mode. 13026 # 13027 # This terminal always displays 25 lines. These lines may be used 13028 # as 24 data lines and a terminal status line (top or bottom) or 13029 # 25 data lines. The 48 and 50 line modes change the page size 13030 # and not the number of lines on the screen. 13031 # 13032 # The Compose Character key can be used as a meta key if changed 13033 # by set-up. 13034 # 13035 wy185|wyse185|Wyse 185, 13036 am, hs, km, mc5i, mir, msgr, xenl, xon, 13037 cols#80, it#8, lines#24, wsl#80, 13038 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13039 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 13040 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r, 13041 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 13042 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 13043 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13044 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, 13045 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 13046 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, 13047 el=\E[K, el1=\E[1K, enacs=\E)0, 13048 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8, 13049 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, 13050 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, 13051 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 13052 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, 13053 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 13054 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf10=\E[21~, 13055 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 13056 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 13057 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, 13058 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, khome=\E[26~, lf1=PF1, 13059 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 13060 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, 13061 rmcup=\E[ R, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, 13062 rmul=\E[24m, rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, 13063 rs2=\E[35h\E[?3l, rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 13064 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? 13065 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 13066 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 13067 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 13068 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, 13069 use=decid+cpr, use=vt220+vtedit, use=vt220+keypad, 13070 # 13071 # Wyse 185 with 24 data lines and top status (terminal status) 13072 wy185-24|wyse185-24|Wyse 185 with 24 data lines, 13073 hs@, 13074 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 13075 use=wy185, 13076 # 13077 # Wyse 185 with visual bell. 13078 wy185-vb|wyse185-vb|Wyse 185+flash, 13079 bel@, use=wy185, 13080 # 13081 # Wyse 185 in 132-column mode. 13082 wy185-w|wyse185-w|Wyse 185 in 132-column mode, 13083 cols#132, wsl#132, 13084 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 13085 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, 13086 # 13087 # Wyse 185 in 132-column mode with visual bell. 13088 wy185-wvb|wyse185-wvb|Wyse 185+flash+132 cols, 13089 bel@, use=wy185-w, 13090 13091 # wy325 terminfo entries 13092 # Done by Joe H. Davis 3-9-92 13093 13094 # lines 25 columns 80 13095 # 13096 wy325|wyse325|Wyse epc, 13097 am, bw, mc5i, mir, 13098 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, 13099 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 13100 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 13101 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 13102 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 13103 dim=\EGp, dl1=\ER$<3>, ed=\EY$<50>, el=\ET$<4>, 13104 flash=\E`8$<100/>\E`9, home=^^, ht=^I, hts=\E1, 13105 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 13106 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024 13107 \El, 13108 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 13109 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 13110 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 13111 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 13112 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 13113 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, 13114 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 13115 mc0=\EP, mc4=^T, mc5=\Ed#, 13116 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 13117 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 13118 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 13119 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, 13120 rs1=\E~!\E~4$<30>, rs2=\EeF\E`:$<70>, 13121 rs3=\EwG\Ee($<100>, 13122 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8} 13123 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t 13124 %{64}%|%;%?%p7%t%{1}%|%;%c, 13125 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 13126 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, 13127 use=adm+sgr, use=wyse+sl, 13128 13129 # 13130 # lines 24 columns 80 vb 13131 # 13132 wy325-vb|wyse325-vb|Wyse-325 with visual bell, 13133 bel@, use=wy325, 13134 13135 # 13136 # lines 24 columns 132 13137 # 13138 wy325-w|wyse325-w|wy325w-24|Wyse-325 in wide mode, 13139 cols#132, lw#7, nlab#16, wsl#97, 13140 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 13141 rs2=\E`;$<70>, use=wy325, 13142 # 13143 # lines 25 columns 80 13144 # 13145 wy325-25|wyse325-25|wy325-80|wyse-325|Wyse-325 25 lines, 13146 lh@, lines#25, lw@, nlab@, 13147 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 13148 # 13149 # lines 25 columns 132 13150 # 13151 wy325-25w|wyse325-25w|Wyse-325 132 columns, 13152 lh@, lines#25, lw@, nlab@, 13153 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 13154 # 13155 # lines 25 columns 132 vb 13156 # 13157 wy325-w-vb|wy325-wvb|wyse325-wvb|Wyse-325 wide mode reverse video, 13158 bel@, use=wy325-w, 13159 13160 # 13161 # lines 42 columns 80 13162 # 13163 wy325-42|wyse325-42|Wyse-325 42 lines, 13164 lh@, lines#42, lw@, nlab@, 13165 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 13166 # 13167 # lines 42 columns 132 13168 # 13169 wy325-42w|wyse325-42w|Wyse-325 42 lines wide mode, 13170 lh@, lines#42, lw@, nlab@, 13171 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 13172 # 13173 # lines 42 columns 132 vb 13174 # 13175 wy325-42w-vb|wy325-42wvb|Wyse-325 42 lines wide mode visual bell, 13176 bel@, use=wy325-w, 13177 # 13178 # lines 43 columns 80 13179 # 13180 wy325-43|wyse325-43|Wyse-325 43 lines, 13181 lh@, lines#43, lw@, nlab@, 13182 pln@, use=wy325, 13183 # 13184 # lines 43 columns 132 13185 # 13186 wy325-43w|wyse325-43w|Wyse-325 43 lines wide mode, 13187 lh@, lines#43, lw@, nlab@, 13188 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 13189 # 13190 # lines 43 columns 132 vb 13191 # 13192 wy325-43w-vb|wy325-43wvb|Wyse-325 43 lines wide mode visual bell, 13193 bel@, use=wy325-w, 13194 13195 # Wyse 370 -- 24 line screen with status line. 13196 # 13197 # The terminal may have to be set for 8 data bits and 2 stop 13198 # bits for the arrow keys to work. 13199 # 13200 # If you change keyboards the terminal will send different 13201 # escape sequences. 13202 # The following definition is for the basic terminal without 13203 # function keys. 13204 # 13205 # <u0> -> enter Tektronix 4010/4014 mode 13206 # <u1> -> exit Tektronix 4010/4014 mode 13207 # <u2> -> enter ASCII mode (from any ANSI mode) 13208 # <u3> -> exit ASCII mode (goto native ANSI mode) 13209 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode) 13210 # <u5> -> exit Tek 4207 mode (goto native ANSI mode) 13211 # 13212 # Bug: The <op> capability resets attributes. 13213 wy370-nk|Wyse 370 without function keys, 13214 am, ccc, hs, mc5i, mir, msgr, xenl, xon, 13215 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, 13216 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13217 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 13218 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r, 13219 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 13220 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 13221 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 13222 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, 13223 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 13224 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, 13225 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, 13226 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8, 13227 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, 13228 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 13229 ind=\n$<2>, 13230 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e 13231 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3 13232 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250} 13233 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%; 13234 %{1}%+%+%+%dw, 13235 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, 13236 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, 13237 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, 13238 mc5=\E[5i, 13239 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w 13240 \E[66;5;51w\E[66;6;61w\E[66;7;64w, 13241 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, 13242 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, 13243 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 13244 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, 13245 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, 13246 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? 13247 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 13248 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 13249 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 13250 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, 13251 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, 13252 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, 13253 use=decid+cpr, 13254 # 13255 # Function key set for the ASCII (wy-50 compatible) keyboard 13256 # This is the default 370. 13257 # 13258 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, 13259 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 13260 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, 13261 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 13262 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, 13263 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 13264 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, 13265 knp=\E[U, kpp=\E[V, use=wy370-nk, 13266 # 13267 # Function key set for the VT-320 (and wy85) compatible keyboard 13268 # 13269 wy370-105k|Wyse 370 with 105 key keyboard, 13270 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13271 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 13272 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 13273 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, 13274 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 13275 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3, 13276 lf4=PF4, use=vt220+vtedit, use=wy370-nk, 13277 use=vt220+keypad, 13278 # 13279 # Function key set for the PC compatible keyboard 13280 # 13281 wy370-EPC|Wyse 370 with 102 key keyboard, 13282 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 13283 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, 13284 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 13285 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 13286 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, 13287 # 13288 # Wyse 370 with visual bell. 13289 wy370-vb|Wyse 370 with visible bell, 13290 bel@, use=wy370, 13291 # 13292 # Wyse 370 in 132-column mode. 13293 wy370-w|Wyse 370 in 132-column mode, 13294 cols#132, wsl#132, 13295 rs2=\E[35h\E[?3h$<70>, use=wy370, 13296 # 13297 # Wyse 370 in 132-column mode with visual bell. 13298 wy370-wvb|Wyse 370 with visible bell 132-columns, 13299 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w, 13300 wy370-rv|Wyse 370 reverse video, 13301 rs3=\E[32h\E[?5h, use=wy370, 13302 # 13303 # Wyse 99gt Tektronix 4010/4014 emulator, 13304 # 13305 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, 13306 am, os, 13307 cols#74, lines#35, 13308 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, 13309 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31} 13310 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004} 13311 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/ 13312 %{31}%&%{64}%+%c\037, 13313 cuu1=^K, ff=^L, 13314 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 13315 \037, 13316 home=^]7`x @\037, 13317 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD 13318 \037, 13319 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h, 13320 # 13321 # Wyse 160 Tektronix 4010/4014 emulator, 13322 # 13323 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, 13324 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31} 13325 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004} 13326 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/ 13327 %{31}%&%{64}%+%c\037, 13328 home=^]8`g @\037, use=wy99gt-tek, 13329 # 13330 # Wyse 370 Tektronix 4010/4014 emulator, 13331 # 13332 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, 13333 am, os, 13334 cols#80, lines#36, 13335 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, 13336 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/ 13337 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32} 13338 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, 13339 cuu1=^K, ff=^L, 13340 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH 13341 \037, 13342 home=^]8g @\037, 13343 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD 13344 \037, 13345 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K, 13346 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0, 13347 13348 # Vendor-supplied Wyse entries end here. 13349 13350 # 13351 #TITLE: TERMINFO ENTRY WY520 13352 #DATE: 8/5/93 13353 # The WY520 terminfo is based on the WY285 entry published on the WYSE 13354 # BBS with the addition of more function keys and special keys. 13355 # 13356 # rs1 -> set personality 13357 # rs2 -> set number of columns 13358 # rs3 -> set number of lines 13359 # is1 -> select the proper font 13360 # is2 -> do the initialization 13361 # is3 -> If this string is empty then rs3 gets sent. 13362 # 13363 # Wyse 520 emulating a VT420 7 bit mode with default ANSI keyboard 13364 # - The BS key is programmed to generate BS in smcup since 13365 # is2 doesn't seem to work. 13366 # - Remove and shift/Remove: delete a character 13367 # - Insert : enter insert mode 13368 # - Find : delete to end of file 13369 # - Select : clear a line 13370 # - F11, F12, F13: send default sequences (not ESC, BS, LF) 13371 # - F14 : Home key 13372 # - Bottom status line (host writable line) is used. 13373 # - smkx,rmkx are removed because this would put the numeric 13374 # keypad in Dec application mode which doesn't seem to work 13375 # with SCO applications. 13376 # 13377 wy520|wyse520|Wyse 520, 13378 am, hs, km, mc5i, mir, xenl, xon, 13379 cols#80, it#8, lines#24, wsl#80, 13380 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13381 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 13382 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r, 13383 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 13384 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 13385 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13386 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, 13387 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, 13388 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, 13389 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, 13390 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, 13391 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 13392 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, 13393 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 13394 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[1~, kel=\E[4~, 13395 kent=\EOM, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 13396 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 13397 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 13398 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 13399 khlp=\E[28~, khome=\E[26~, lf1=PF1, lf2=PF2, lf3=PF3, 13400 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 13401 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, 13402 rmso=\E[m, rmul=\E[24m, 13403 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 13404 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 13405 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%? 13406 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 13407 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, 13408 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 13409 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 13410 vpa=\E[%i%p1%dd, use=decid+cpr, use=vt220+vtedit, 13411 use=vt220+keypad, 13412 # 13413 # Wyse 520 with 24 data lines and status (terminal status) 13414 wy520-24|wyse520-24|Wyse 520 with 24 data lines, 13415 hs@, 13416 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 13417 use=wy520, 13418 # 13419 # Wyse 520 with visual bell. 13420 wy520-vb|wyse520-vb|Wyse 520 with visible bell, 13421 flash=\E[30h\E\,$<100/>\E[30l, use=wy520, 13422 # 13423 # Wyse 520 in 132-column mode. 13424 wy520-w|wyse520-w|Wyse 520 in 132-column mode, 13425 cols#132, wsl#132, 13426 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 13427 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, 13428 # 13429 # Wyse 520 in 132-column mode with visual bell. 13430 wy520-wvb|wyse520-wvb|Wyse 520 with visible bell 132-columns, 13431 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w, 13432 # 13433 # 13434 # Wyse 520 emulating a VT420 7 bit mode. 13435 # The DEL key is programmed to generate BS in is2. 13436 # With EPC keyboard. 13437 # - 'End' key will clear till end of line on EPC keyboard 13438 # - Shift/End : ignored. 13439 # - Insert : enter insert mode. 13440 # - Delete : delete a character (have to change interrupt character 13441 # to CTRL-C: stty intr '^c') for it to work since the 13442 # Delete key sends 7FH. 13443 wy520-epc|wyse520-epc|Wyse 520 with EPC keyboard, 13444 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, 13445 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, 13446 use=wy520, 13447 # 13448 # Wyse 520 with 24 data lines and status (terminal status) 13449 # with EPC keyboard. 13450 wy520-epc-24|wyse520-pc-24|Wyse 520 with 24 data lines and EPC keyboard, 13451 hs@, 13452 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 13453 use=wy520-epc, 13454 # 13455 # Wyse 520 with visual bell. 13456 wy520-epc-vb|wyse520-pc-vb|Wyse 520 with visible bell and EPC keyboard, 13457 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc, 13458 # 13459 # Wyse 520 in 132-column mode. 13460 wy520-epc-w|wyse520-epc-w|Wyse 520 in 132-column mode with EPC keyboard, 13461 cols#132, wsl#132, 13462 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 13463 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, 13464 # 13465 # Wyse 520 in 132-column mode with visual bell. 13466 wy520-epc-wvb|wyse520-p-wvb|Wyse 520 with visible bell 132-columns and EPC keyboard, 13467 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w, 13468 # 13469 # Wyse 520 in 80-column, 36 lines 13470 wy520-36|wyse520-36|Wyse 520 with 36 data lines, 13471 hs@, 13472 lines#36, 13473 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 13474 use=wy520, 13475 # 13476 # Wyse 520 in 80-column, 48 lines 13477 wy520-48|wyse520-48|Wyse 520 with 48 data lines, 13478 hs@, 13479 lines#48, 13480 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 13481 use=wy520, 13482 # 13483 # Wyse 520 in 132-column, 36 lines 13484 wy520-36w|wyse520-36w|Wyse 520 with 132 columns and 36 data lines, 13485 cols#132, wsl#132, 13486 rs2=\E[?3h, 13487 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 13488 use=wy520-36, 13489 # 13490 # Wyse 520 in 132-column, 48 lines 13491 wy520-48w|wyse520-48w|Wyse 520 with 48 data lines (132 column), 13492 cols#132, wsl#132, 13493 rs2=\E[?3h, 13494 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 13495 use=wy520-48, 13496 # 13497 # 13498 # Wyse 520 in 80-column, 36 lines with EPC keyboard 13499 wy520-36pc|wyse520-36pc|Wyse 520 with 36 data lines and EPC keyboard, 13500 hs@, 13501 lines#36, 13502 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 13503 use=wy520-epc, 13504 # 13505 # Wyse 520 in 80-column, 48 lines with EPC keyboard 13506 wy520-48pc|wyse520-48pc|Wyse 520 with 48 data lines and EPC keyboard, 13507 hs@, 13508 lines#48, 13509 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 13510 use=wy520-epc, 13511 # 13512 # Wyse 520 in 132-column, 36 lines with EPC keyboard 13513 wy520-36wpc|wyse520-36wpc|Wyse 520 with 36 data lines and EPC keyboard (132 column), 13514 cols#132, wsl#132, 13515 rs2=\E[?3h, 13516 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 13517 use=wy520-36pc, 13518 # 13519 # Wyse 520 in 132-column, 48 lines with EPC keyboard 13520 wy520-48wpc|wyse520-48wpc|Wyse 520 with 48 data lines and EPC keyboard (132 column), 13521 cols#132, wsl#132, 13522 rs2=\E[?3h, 13523 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 13524 use=wy520-48pc, 13525 13526 # From: John Gilmore <hoptoad!gnu (at] lll-crg.arpa> 13527 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such 13528 # file and we don't know what <hts> is -- esr) 13529 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, 13530 OTbs, am, 13531 cols#80, it#8, lines#24, 13532 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F, 13533 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, 13534 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n, 13535 is2=\E`:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F, 13536 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O, 13537 rmul=^O, rs1=\E`:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, 13538 smul=^N, 13539 13540 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, 13541 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, 13542 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 13543 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, 13544 use=wy75, 13545 13546 # From: Eric Freudenthal <freudent (at] eric.ultra.nyu.edu> 13547 wy100q|Wyse 100 for Quotron, 13548 OTbs, 13549 cols#80, lines#24, xmc#1, 13550 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L, 13551 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 13552 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, 13553 is2=\E`:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n, 13554 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, 13555 13556 #### Kermit terminal emulations 13557 # 13558 # Obsolete Kermit versions may be listed in the section describing obsolete 13559 # non-ANSI terminal emulators later in the file. 13560 # 13561 13562 # KERMIT standard all versions. 13563 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 13564 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 13565 # From: greg small <gts (at] populi.berkeley.edu> 9-25-84 13566 kermit|standard kermit, 13567 OTbs, 13568 cols#80, lines#24, 13569 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 13570 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 13571 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, 13572 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, 13573 kermit-am|standard kermit plus auto-margin, 13574 am, 13575 is2=K1 Standard Kermit plus Automatic Margins\n, 13576 use=kermit, 13577 # IBMPC Kermit 1.2. 13578 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does 13579 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of 13580 # line). 13581 # From: greg small <gts (at] populi.berkeley.edu> 8-30-84 13582 pckermit|pckermit12|UCB IBMPC Kermit 1.2, 13583 am, 13584 lines#25, 13585 clear=\EH\EJ, ed@, el@, 13586 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, 13587 # IBMPC Kermit 1.20 13588 # Cannot use line 25, now acts funny like ANSI special scrolling region. 13589 # Initialization must escape from that region by cursor position to line 24. 13590 # Cannot use character insert because 1.20 goes crazy if insert at col 80. 13591 # Does not use :am: because autowrap is lost when kermit dropped and restarted. 13592 # From: greg small <gts (at] populi.berkeley.edu> 12-19-84 13593 pckermit120|UCB IBMPC Kermit 1.20, 13594 it#8, 13595 cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, il1=\EL, 13596 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84 13597 \n, 13598 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, 13599 # MS-DOS Kermit 2.27 for the IBMPC 13600 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 13601 # Cannot use line 25, now acts funny like ANSI special scrolling region. 13602 # Initialization must escape from that region by cursor position to line 24. 13603 # Does not use am: because autowrap is lost when kermit dropped and restarted. 13604 # Reverse video for standout like H19. 13605 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 13606 # From: greg small <gts (at] populi.berkeley.edu> 3-17-85 13607 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, 13608 OTbs, am@, 13609 cols#80, it#8, lines#24, 13610 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 13611 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 13612 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, 13613 home=\EH, ht=^I, il1=\EL, 13614 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe 13615 \sIBMPC\s3-17-85\n, 13616 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, 13617 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, 13618 # MS-DOS Kermit 2.27 with automatic margins 13619 # From: greg small <gts (at] populi.berkeley.edu> 3-17-85 13620 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, 13621 am, 13622 cvvis=\EO\Eq\EG\EvK5, 13623 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic 13624 \smargins\s3-17-85\n, 13625 use=msk227, 13626 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC 13627 # Automatic margins now default. Use ansi <sgr> for highlights. 13628 # Define function keys. 13629 # (msk22714: removed obsolete ":kn#10:" -- esr) 13630 # From: greg small <gts (at] populi.berkeley.edu> 3-17-85 13631 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, 13632 am, 13633 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, 13634 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14 13635 \sIBM\sPC\s3-17-85\n, 13636 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, 13637 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, 13638 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, 13639 # This was designed for a VT320 emulator, but it is probably a good start 13640 # at support for the VT320 itself. 13641 # Please send changes with explanations to bug-gnu-emacs (at] prep.ai.mit.edu. 13642 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr) 13643 vt320-k3|MS-Kermit 3.00's VT320 emulation, 13644 am, eslok, hs, km, mir, msgr, xenl, 13645 cols#80, it#8, lines#49, pb#9600, vt#3, 13646 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13647 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cmdch=\E, 13648 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 13649 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 13650 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13651 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 13652 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 13653 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[ 13654 ?5l, 13655 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 13656 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, 13657 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, 13658 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, 13659 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 13660 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, 13661 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8, 13662 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, 13663 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 13664 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h 13665 \E[4i\E[?4i\E[m\E[r\E[2$~, 13666 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 13667 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 13668 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, use=vt220+cvis, 13669 13670 # From: Joseph Gil <yogi (at] cs.ubc.ca> 13 Dec 1991 13671 # ACS capabilities from Philippe De Muyter <phdm (at] info.ucl.ac.be> 30 May 1996 13672 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr) 13673 vt320-k311|DEC VT320 series as defined by kermit 3.11, 13674 am, eslok, hs, mir, msgr, xenl, xon, 13675 cols#80, it#8, lines#24, vt#3, 13676 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13677 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=\r, 13678 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 13679 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 13680 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13681 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 13682 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 13683 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, 13684 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, 13685 ind=\ED, 13686 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 13687 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 13688 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 13689 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 13690 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m, 13691 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, 13692 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 13693 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, 13694 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 13695 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, 13696 use=vt220+cvis, 13697 13698 ######## NON-ANSI TERMINAL EMULATIONS 13699 # 13700 13701 #### Avatar 13702 # 13703 # These entries attempt to describe Avatar, a terminal emulation used with 13704 # MS-DOS bulletin-board systems. It was designed to give ANSI-like 13705 # capabilities, but with cheaper (shorter) control sequences. Messy design, 13706 # excessively dependent on PC idiosyncrasies, but apparently rather popular 13707 # in the BBS world. 13708 # 13709 # No color support. Avatar doesn't fit either of the Tektronix or HP color 13710 # models that terminfo knows about. An Avatar color attribute is the 13711 # low 7 bits of the IBM-PC display-memory attribute. Bletch. 13712 # 13713 # I wrote these entries while looking at the Avatar spec. I don't have 13714 # the facilities to test them. Let me know if they work, or don't. 13715 # 13716 # Avatar escapes not used by these entries (because maybe you're smarter 13717 # and more motivated than I am and can figure out how to wrap terminfo 13718 # around some of them, and because they are weird enough to be funny): 13719 # level 0: 13720 # ^L -- clear window/reset current attribute to default 13721 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows: 13722 # 13723 # bit: 6 5 4 3 2 1 0 13724 # | | | | | 13725 # +---+---+ | +---+---+ 13726 # | | | 13727 # | | foreground color 13728 # | foreground intensity 13729 # background color 13730 # level 0+: 13731 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines 13732 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines 13733 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 13734 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 13735 # (^V^L and ^V^M set the current attribute as a side-effect.) 13736 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes 13737 # in the pattern, <c> the number of times the pattern 13738 # should be repeated. If either value is 0, no-op. 13739 # The pattern can contain Avatar console codes, 13740 # including other ^V ^Y patterns. 13741 # level 1: 13742 # ^V^O -- clockwise mode on; turn print direction right each time you 13743 # hit a window edge (yes, really). Turned off by CR 13744 # ^V^P -- no-op 13745 # ^V^Q%c -- query the driver 13746 # ^V^R -- driver reset 13747 # ^V^S -- Sound tone (PC-specific) 13748 # ^V^T -- change highlight at current cursor position to %c 13749 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> 13750 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c 13751 # -- define window 13752 # 13753 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> 1 Nov 1995 13754 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to 13755 # tell ncurses that the corresponding highlights exist; it should use <sgr>, 13756 # which is the only method that will actually work for multiple highlights.) 13757 # 13758 # Update by TD - 2004: half of this was inconsistent. Found documentation 13759 # and repaired most of the damage. sgr0 is probably incorrect, but the 13760 # available documentation gives no clues for a workable string. 13761 avatar0|avatar terminal emulator level 0, 13762 am, bce, msgr, 13763 cols#80, it#8, lines#25, 13764 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D, 13765 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, 13766 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, 13767 rmacs@, rs2=^L, 13768 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%? 13769 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t 13770 %{16}%|%;%;%c%;%?%p4%t\026\002%;, 13771 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, 13772 use=klone+acs, 13773 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> 1 Nov 1995 13774 avatar0+|avatar terminal emulator level 0+, 13775 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, 13776 # From: Eric S. Raymond <esr (at] snark.thyrsus.com> 1 Nov 1995 13777 avatar|avatar1|avatar terminal emulator level 1, 13778 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, 13779 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, 13780 13781 #### RBcomm 13782 # 13783 # RBComm is a lean and mean terminal emulator written by the Interrupt List 13784 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early 13785 # '90s), especially in the BBS world, and still has some loyal users due to 13786 # its very small memory footprint and to a cute macro language. 13787 rbcomm|IBM PC with RBcomm and EMACS keybindings, 13788 am, bw, mir, msgr, xenl, 13789 cols#80, it#8, lines#25, 13790 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=^L, cr=\r, 13791 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B, 13792 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, 13793 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, 13794 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, 13795 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, 13796 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED, 13797 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, 13798 rmir=^], rmkx=\E>, rmso=^U, rmul=^U, 13799 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, 13800 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, 13801 use=vt220+cvis, 13802 rbcomm-nam|IBM PC with RBcomm without autowrap, 13803 am@, 13804 cud1=\n, ind=\n, 13805 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kcub1=^H, 13806 kcud1=\n, nel=\r\n, use=rbcomm, 13807 rbcomm-w|IBM PC with RBcomm in 132 column mode, 13808 cols#132, 13809 cud1=\n, ind=\n, 13810 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kcub1=^H, 13811 kcud1=\n, nel=\r\n, use=rbcomm, 13812 13813 ######## LCD DISPLAYS 13814 # 13815 13816 #### Matrix Orbital 13817 # from: Eric Z. Ayers (eric (at] ale.org) 13818 # 13819 # Matrix Orbital 20x4 LCD display 13820 # Command Character is 0xFE (decimal 254, octal 376) 13821 # 13822 # On this device, cursor addressability isn't possible. The LCD expects: 13823 # 0xfe G <col> <row> 13824 # for cup: %p1 == row and %p2 is column 13825 # 13826 # This line: 13827 # cup=\376G%p2%c%p1%c 13828 # LOOKS like it will work, but sometimes only one of the two numbers is sent. 13829 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. 13830 # 13831 # Alas, there is no cursor upline capability on this display. 13832 # 13833 # These entries add some 'sanity stuff' to the clear function. That is, it 13834 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, 13835 # and turns off the cursor blinking and stuff like that. 13836 # 13837 # NOTE: calling 'beep' turns on the backlight (bell) 13838 # NOTE: calling 'flash' turns it on and back off (visual bell) 13839 # 13840 MtxOrb|generic Matrix Orbital LCD display, 13841 bel=\376B\001, clear=\376X\376C\376R\376K\376T, 13842 cnorm=\376K\376T, cub1=\376L, cuf1=\376M, 13843 flash=\376B\001$<200>\376F, home=\376H, 13844 MtxOrb204|20x4 Matrix Orbital LCD display, 13845 cols#20, lines#4, use=MtxOrb, 13846 MtxOrb162|16x2 Matrix Orbital LCD display, 13847 cols#16, lines#2, use=MtxOrb, 13848 # The end 13849 13850 ######## OLDER TERMINAL TYPES 13851 # 13852 # This section is devoted to older commercial terminal brands that are now 13853 # discontinued, but known to be still in use or represented by emulations. 13854 # 13855 13856 #### AT&T (att, tty) 13857 # 13858 # This section also includes Teletype-branded VDTs. 13859 # 13860 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now 13861 # Boundless Technologies); for details, see the header comment on the ADDS 13862 # section. 13863 # 13864 # These are AT&T's official terminfo entries. All-caps aliases have been 13865 # removed. 13866 # 13867 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, 13868 am, eo, mir, msgr, xon, 13869 cols#80, it#8, lines#24, 13870 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H, 13871 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 13872 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13873 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 13874 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 13875 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J, 13876 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 13877 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, 13878 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, 13879 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, 13880 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, 13881 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 13882 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, 13883 smso=\E[7m, use=ansi+cpr, 13884 att2350|AT&T 2350 Video Information Terminal 80 column mode, 13885 mc0@, mc4@, mc5@, use=att2300, 13886 13887 # Must setup RETURN KEY - CR, REC'VD LF - INDEX. 13888 # Seems upward compatible with VT100, plus ins/del line/char. 13889 # On sgr, the protection parameter is ignored. 13890 # No check is made to make sure that only 3 parameters are output. 13891 # standout= reverse + half-intensity = 3 | 5. 13892 # bold= reverse + underline = 2 | 3. 13893 # note that half-bright blinking doesn't look different from normal blinking. 13894 # NOTE:you must program the function keys first, label second! 13895 # (att4410: a BSD entry has been seen with the following capabilities: 13896 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>, 13897 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr) 13898 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, 13899 am, hs, mir, msgr, xon, 13900 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 13901 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz 13902 z{{||}}~~, 13903 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r, 13904 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 13905 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, 13906 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, 13907 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0, 13908 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s 13909 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s 13910 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s 13911 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q 13912 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s 13913 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s 13914 \s\s\s\EOW, 13915 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 13916 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 13917 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, 13918 ll=\E[24H, nel=\r\n, 13919 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s 13920 \s%p2%s, 13921 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 13922 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 13923 sc=\E7, 13924 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 13925 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 13926 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 13927 tsl=\E7\E[25;%p1%{1}%+%dH, 13928 13929 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, 13930 cols#132, wsl#132, 13931 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, 13932 13933 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, 13934 OTbs, 13935 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, 13936 use=att5410v1, 13937 13938 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, 13939 cols#132, wsl#132, 13940 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, 13941 13942 # 5410 in terms of a VT100 13943 # (v5410: added <rmam>/<smam> based on init string -- esr) 13944 v5410|att5410 in terms of a VT100, 13945 am, mir, msgr, xon, 13946 cols#80, it#8, lines#24, vt#3, 13947 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 13948 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 13949 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 13950 cub1=^H, cud1=\n, cuf1=\E[C$<2>, 13951 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, 13952 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 13953 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, 13954 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 13955 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, 13956 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 13957 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 13958 sc=\E7, 13959 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 13960 %;m%?%p9%t\016%e\017%;$<2>, 13961 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 13962 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 13963 use=decid+cpr, use=vt100+fnkeys, 13964 13965 # 13966 # Teletype Model 5420 -- A souped up 5410, with multiple windows, 13967 # even! the 5420 has three modes: scroll, window or page mode 13968 # this terminfo should work in scroll or window mode, but doesn't 13969 # take advantage of any of the differences between them. 13970 # 13971 # Has memory below (2 lines!) 13972 # 3 pages of memory (plus some spare) 13973 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>, 13974 # <hpa>, <hts> would work for these, but these work in both scroll and window 13975 # mode... Unset insert character so insert mode works 13976 # <is1> sets 80 column mode, 13977 # <is2> escape sequence: 13978 # 1) turn off all fonts 13979 # 2) function keys off, keyboard lock off, control display off, 13980 # insert mode off, erasure mode off, 13981 # 3) full duplex, monitor mode off, send graphics off, nl on lf off 13982 # 4) reset origin mode 13983 # 5) set line wraparound 13984 # 6) exit erasure mode, positional attribute mode, and erasure extent mode 13985 # 7) clear margins 13986 # 8) program ENTER to transmit ^J, 13987 # We use \212 to program the ^J because a bare ^J will get translated by 13988 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS. 13989 # 1 2 3 4 5 6 7 8 13990 # <is3> set screen color to black, 13991 # No representation in terminfo for the delete word key: kdw1=\Ed 13992 # Key capabilities assume the power-up send sequence... 13993 # This <rmcup> is not strictly necessary, but it helps maximize 13994 # memory usefulness: <rmcup=\Ez>, 13995 # Alternate sgr0: <sgr0=\E[m\EW^O>, 13996 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>, 13997 # smkx programs the SYS PF keys to send a set sequence. 13998 # It also sets up labels f1, f2, ..., f8, and sends edit keys. 13999 # This string causes them to send the strings <kf1>-<kf8> 14000 # when pressed in SYS PF mode. 14001 # (att4415: I added <rmam>/<smam> based on the init string -- esr) 14002 att4415|tty5420|att5420|AT&T 4415/5420 80 cols, 14003 db, 14004 lm#78, wsl#55, 14005 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, 14006 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, 14007 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, 14008 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, 14009 flash=\E[?5h$<200>\E[?5l, home=\E[x, 14010 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, 14011 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, 14012 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h 14013 \E[4i\Ex\E[21;1j\212, 14014 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, 14015 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, 14016 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 14017 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 14018 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 14019 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, 14020 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, 14021 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, 14022 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, 14023 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, 14024 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, 14025 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 14026 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, 14027 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, 14028 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, 14029 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 14030 use=att4410, 14031 14032 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, 14033 cols#132, lm#54, wsl#97, 14034 is1=\E[?3h$<100>, use=att4415, 14035 14036 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, 14037 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, 14038 14039 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, 14040 cols#132, lm#54, wsl#97, 14041 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, 14042 use=att4415, 14043 14044 # Note that this mode permits programming USER PF KEYS and labels 14045 # However, when you program user pf labels you have to reselect 14046 # user pf keys to make them appear! 14047 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, 14048 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 14049 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s 14050 \s%p2%s, 14051 pln=\E[%p1%d;0;0;1q%p2%:-16.16s, 14052 14053 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, 14054 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 14055 use=att4415, 14056 14057 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, 14058 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 14059 use=att4415-rv, 14060 14061 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, 14062 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 14063 use=att4415-w, 14064 14065 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, 14066 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 14067 use=att4415-w-rv, 14068 14069 att5420_2|AT&T 5420 model 2 80 cols, 14070 am, db, hs, mir, msgr, xon, 14071 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 14072 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14073 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, 14074 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14075 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 14076 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 14077 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 14078 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, 14079 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 14080 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, 14081 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 14082 indn=\E[%p1%dE, invis=\E[8m, 14083 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j 14084 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j 14085 \E[29;0j\E[1;24r, 14086 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, 14087 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 14088 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe, 14089 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, 14090 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 14091 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 14092 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, 14093 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n, 14094 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2 14095 %s\E~, 14096 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, 14097 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, 14098 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 14099 sc=\E7, 14100 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1 14101 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;, 14102 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, 14103 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 14104 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 14105 use=decid+cpr, 14106 att5420_2-w|AT&T 5420 model 2 in 132 column mode, 14107 cols#132, 14108 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j 14109 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j 14110 \E[29;0j\E[1;24r, 14111 use=att5420_2, 14112 14113 att4418|att5418|AT&T 5418 80 cols, 14114 am, xon, 14115 cols#80, lines#24, 14116 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14117 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, 14118 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 14119 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 14120 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, 14121 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, 14122 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n, 14123 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, 14124 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, 14125 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, 14126 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, 14127 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, 14128 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, 14129 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, 14130 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 14131 att4418-w|att5418-w|AT&T 5418 132 cols, 14132 cols#132, 14133 is1=\E[?3h, use=att5418, 14134 14135 att4420|tty4420|Teletype 4420, 14136 OTbs, da, db, eo, msgr, ul, xon, 14137 cols#80, lines#24, lm#72, 14138 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, 14139 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 14140 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, 14141 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, 14142 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, 14143 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, 14144 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, 14145 rmul=\EZ, smdc@, smso=\E}, smul=\E\\, 14146 14147 # The following is a terminfo entry for the Teletype 4424 14148 # asynchronous keyboard-display terminal. It supports 14149 # the vi editor. The terminal must be set up as follows, 14150 # 14151 # HIGHLIGHT DEFINITION 3-TONE 14152 # DISPLAY FUNCTION GROUP III 14153 # 14154 # The second entry below provides limited (a la adm3a) 14155 # operation under GROUP II. 14156 # 14157 # This must be used with DISPLAY FUNCTION GROUP I or III 14158 # and HIGHLIGHT DEFINITION 3-TONE 14159 # The terminal has either bold or blink, depending on options 14160 # 14161 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr) 14162 att4424|tty4424|Teletype 4424, 14163 OTbs, am, xon, 14164 cols#80, lines#24, 14165 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14166 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r, 14167 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14168 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, 14169 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, 14170 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, 14171 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 14172 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h, 14173 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 14174 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 14175 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, 14176 rmul=\EZ, 14177 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%| 14178 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;, 14179 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, 14180 tbc=\EF, 14181 14182 att4424-1|tty4424-1|Teletype 4424 in display function group I, 14183 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, 14184 use=att4424, 14185 14186 # This entry is not one of AT&T's official ones, it was translated from the 14187 # 4.4BSD termcap file. The highlight strings are different from att4424. 14188 # I have no idea why this is -- older firmware version, maybe? 14189 # The following two lines are the comment originally attached to the entry: 14190 # This entry appears to avoid the top line - I have no idea why. 14191 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp 14192 att4424m|tty4424m|Teletype 4424M, 14193 am, da, db, mir, 14194 cols#80, it#8, lines#23, 14195 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 14196 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, 14197 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>, 14198 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, 14199 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 14200 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m, 14201 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 14202 14203 # The Teletype 5425 is really version 2 of the Teletype 5420. It 14204 # is quite similar, except for some minor differences. No page 14205 # mode, for example, so all of the <cup> sequences used above have 14206 # to change back to what's being used for the 5410. Many of the 14207 # option settings have changed their numbering as well. 14208 # 14209 # This has been tested on a preliminary model. 14210 # 14211 # (att5425: added <rmam>/<smam> based on the init string -- esr) 14212 att5425|tty5425|att4425|AT&T 4425/5425, 14213 am, da, db, hs, mir, msgr, xenl, xon, 14214 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 14215 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14216 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 14217 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r, 14218 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14219 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 14220 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14221 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 14222 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, 14223 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 14224 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, 14225 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 14226 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE, 14227 invis=\E[8m, is1=\E<\E[?3l$<100>, 14228 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h 14229 \E[4i\Ex\E[25;1j\212, 14230 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, 14231 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 14232 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, 14233 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, 14234 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, 14235 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, 14236 nel=\r\n, 14237 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 14238 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, 14239 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, 14240 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, 14241 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, 14242 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6 14243 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, 14244 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 14245 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, 14246 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, 14247 vpa=\E[%p1%{1}%+%dd, use=decid+cpr, 14248 14249 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, 14250 smkx=\E[21;1j\E[25;4j\Eent, use=att4425, 14251 14252 att5425-w|att4425-w|tty5425-w|Teletype 4425/5425 in 132 column mode, 14253 cols#132, lm#54, wsl#97, 14254 is1=\E[?3h$<100>, use=tty5425, 14255 14256 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. 14257 # I also added <rmam>/<smam> -- esr) 14258 att4426|tty4426|Teletype 4426S, 14259 am, da, db, xon, 14260 cols#80, lines#24, lm#48, 14261 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14262 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, 14263 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 14264 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14265 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP, 14266 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, 14267 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, 14268 il=\E[%p1%dL, il1=\EL, ind=\n, is1=\Ec\E[?7h, 14269 is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED, 14270 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ, 14271 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 14272 khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, rc=\E8, 14273 rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, 14274 rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, 14275 smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, 14276 vpa=\E[%p1%dd, use=ecma+index, 14277 14278 # Terminfo entry for the AT&T 510 A Personal Terminal 14279 # Function keys 9 - 16 are available only after the 14280 # screen labeled (soft keys/action blocks) are labeled. Function key 14281 # 9 corresponds to the leftmost touch target on the screen, 14282 # function key 16 corresponds to the rightmost. 14283 # 14284 # This entry is based on one done by Ernie Rice at Summit, NJ and 14285 # changed by Anne Gallup, Skokie, IL, ttrdc!anne 14286 att510a|bct510a|AT&T 510A Personal Terminal, 14287 am, mir, msgr, xenl, xon, 14288 cols#80, lh#2, lines#24, lw#7, nlab#8, 14289 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 14290 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 14291 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, 14292 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 14293 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14294 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, 14295 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, 14296 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, 14297 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l, 14298 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, 14299 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, 14300 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, 14301 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, 14302 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, 14303 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, 14304 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 14305 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, 14306 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6 14307 %|%t;7%;m%?%p9%t\016%e\017%;, 14308 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, 14309 smul=\E[4m, tbc=\E[3g, use=ansi+cpr, 14310 14311 # Terminfo entry for the AT&T 510 D Personal Terminal 14312 # Function keys 9 through 16 are accessed by bringing up the 14313 # system blocks. 14314 # Function key 9 corresponds to the leftmost touch target on the screen, 14315 # function key 16 corresponds to the rightmost. 14316 # 14317 # There are problems with soft key labeling. These are due to 14318 # strangenesses in the native terminal that are impossible to 14319 # describe in a terminfo. 14320 att510d|bct510d|AT&T 510D Personal Terminal, 14321 am, da, db, mir, msgr, xenl, xon, 14322 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, 14323 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 14324 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 14325 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD, 14326 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 14327 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 14328 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, 14329 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, 14330 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, 14331 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 14332 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, 14333 is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u, 14334 kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 14335 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe, 14336 kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj, 14337 kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh, 14338 kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i, 14339 mc4=\E[?8i, mc5=\E[?4i, mgc=\E:, nel=\EE, 14340 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 14341 rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m, 14342 rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7, 14343 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6 14344 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 14345 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, 14346 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, 14347 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 14348 use=ansi+cpr, use=ansi+rep, use=ecma+index, 14349 14350 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr) 14351 att500|att513|AT&T 513 using page mode, 14352 am, chts, mir, msgr, xenl, xon, 14353 cols#80, lh#2, lines#24, lw#8, nlab#8, 14354 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 14355 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 14356 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r, 14357 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14358 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 14359 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14360 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, 14361 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 14362 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 14363 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, 14364 indn=\E[%p1%dE, invis=\E[8m, 14365 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, 14366 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 14367 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 14368 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, 14369 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, 14370 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, 14371 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, 14372 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, 14373 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14374 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, 14375 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 14376 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, 14377 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, 14378 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 14379 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 14380 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, 14381 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, 14382 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, 14383 nel=\EE, 14384 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s 14385 \s%p2%s, 14386 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s 14387 \s%p2%s, 14388 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, 14389 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 14390 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, 14391 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, 14392 rmul=\E[m, 14393 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0| 14394 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, 14395 rs2=\E[5;0|, sc=\E7, 14396 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 14397 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 14398 sgr0=\E[m\017, smacs=^N, smir=\E[4h, 14399 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, 14400 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 14401 use=decid+cpr, use=ansi+rep, 14402 14403 # 01-07-88: 14404 # printer must be set to EMUL ANSI to accept ESC codes 14405 # <cuu1> stops at top margin 14406 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font 14407 # and alt font ascii,wrap on,tabs cleared 14408 # <is2> disables newline on LF,Emphasized off 14409 # The <u0> capability sets form length 14410 att5310|att5320|AT&T Model 53210 or 5320 matrix printer, 14411 xhpa, xvpa, 14412 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10, 14413 orhi#100, orl#12, orvi#72, 14414 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w 14415 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O 14416 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t 14417 \E[8w%;, 14418 cr=\r, 14419 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi 14420 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1 14421 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench 14422 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1 14423 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit 14424 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos 14425 aic%;, 14426 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, 14427 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, 14428 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e 14429 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, 14430 rshm=\E[m, 14431 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1 14432 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6} 14433 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t 14434 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t 14435 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t 14436 \E(}%;, 14437 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, 14438 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, 14439 u0=\E[%p1%dt, vpa=\E[%p1%dd, 14440 14441 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL 14442 # The following SET-UP modes are assumed for normal operation: 14443 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL 14444 # Other SET-UP modes may be set for operator convenience or communication 14445 # requirements. This termcap description is for the Resident Terminal Mode. 14446 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 14447 # The BRL entry also said: UNSAFE :ll=\E[70H: 14448 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, 14449 am, xon, 14450 cols#88, it#8, lines#70, vt#3, 14451 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 14452 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 14453 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 14454 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 14455 il1=\E[L, ind=\n, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 14456 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\r\n, 14457 rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ecma+index, 14458 14459 # 5620 terminfo (2.0 or later ROMS with char attributes) 14460 # The following SET-UP modes are assumed for normal operation: 14461 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR 14462 # Other SET-UP modes may be set for operator convenience or communication 14463 # requirements. This termcap description is for Resident Terminal Mode. No 14464 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 14465 # assumptions: <ind> (scroll forward one line) is only done at screen bottom 14466 # Be aware that older versions of the dmd have a firmware bug that affects 14467 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional. 14468 # <msgr> is from an otherwise inferior BRL for this terminal. That entry 14469 # also has <ll>=\E[70H commented out and marked unsafe. 14470 # For more, see the 5620 FAQ maintained by David Breneman <daveb (at] dgtl.com>. 14471 att5620|dmd|tty5620|ttydmd|5620|AT&T 5620 terminal 88 columns, 14472 OTbs, am, msgr, npc, xon, 14473 cols#88, it#8, lines#70, 14474 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H, 14475 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 14476 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 14477 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, 14478 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kbs=^H, 14479 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14480 khome=\E[H, kll=\E[70;1H, nel=\n, 14481 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, 14482 rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m, 14483 smso=\E[7m, smul=\E[4m, use=ecma+index, 14484 att5620-24|tty5620-24|dmd-24|Teletype dmd 5620 in a 24x80 layer, 14485 lines#24, use=att5620, 14486 att5620-34|tty5620-34|dmd-34|Teletype dmd 5620 in a 34x80 layer, 14487 lines#34, use=att5620, 14488 # 5620 layer running the "S" system's downloaded graphics handler: 14489 att5620-s|tty5620-s|layer|vitty|AT&T 5620 S layer, 14490 OTbs, OTpt, am, 14491 cols#80, it#8, lines#72, 14492 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, 14493 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, 14494 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J, 14495 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 14496 kll=\E[70;1H, 14497 14498 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys. 14499 # 14500 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode 14501 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 14502 att605|AT&T 605 80 column 102key keyboard, 14503 am, eo, xon, 14504 cols#80, lines#24, lw#8, nlab#8, wsl#80, 14505 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14506 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 14507 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C, 14508 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 14509 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 14510 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 14511 il1=\E[L, ind=\n, invis=\E[8m, 14512 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, 14513 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, 14514 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 14515 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, 14516 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, 14517 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, 14518 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, 14519 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, 14520 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, 14521 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, 14522 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, 14523 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, 14524 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, 14525 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, 14526 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 14527 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 14528 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 14529 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 14530 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, 14531 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 14532 tsl=\E7\E[25;%i%p1%dx, use=ansi+cpr, 14533 att605-pc|AT&T 605 in pc term mode, 14534 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x 14535 \263, 14536 cub1=\E[D, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, 14537 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 14538 kf9=\E[U, knp=\E[G, kpp=\E[I, rmsc=\E[50;0|$<400>, 14539 smsc=\E[?11l\E[50;1|$<250>, xoffc=g, xonc=e, use=att605, 14540 att605-w|AT&T 605-w 132 column 102 key keyboard, 14541 cols#132, wsl#132, 14542 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605, 14543 # (att610: I added <rmam>/<smam> based on the init string. I also 14544 # added <indn> and <rin> because the BSD file says the att615s have them, 14545 # and the 615 is like a 610 with a big keyboard, and most of their other 14546 # smart terminals support the same sequence -- esr) 14547 att610|AT&T 610; 80 column; 98key keyboard, 14548 am, eslok, hs, mir, msgr, xenl, xon, 14549 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 14550 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14551 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 14552 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14553 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 14554 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14555 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 14556 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 14557 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 14558 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 14559 invis=\E[8m, 14560 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, 14561 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 14562 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 14563 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 14564 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 14565 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 14566 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, 14567 nel=\EE, 14568 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 14569 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 14570 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p, 14571 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, 14572 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 14573 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 14574 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 14575 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, 14576 use=decid+cpr, use=ecma+index, use=att610+cvis, 14577 att610-w|AT&T 610; 132 column; 98key keyboard, 14578 cols#132, wsl#132, 14579 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 14580 use=att610, 14581 14582 att610-103k|AT&T 610; 80 column; 103key keyboard, 14583 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 14584 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 14585 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 14586 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 14587 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 14588 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 14589 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r, 14590 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, 14591 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, 14592 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, 14593 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, 14594 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, 14595 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, 14596 att610-103k-w|AT&T 610; 132 column; 103key keyboard, 14597 cols#132, wsl#132, 14598 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 14599 use=att610-103k, 14600 att615|AT&T 615; 80 column; 98key keyboard, 14601 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 14602 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 14603 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 14604 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 14605 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 14606 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 14607 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, 14608 att615-w|AT&T 615; 132 column; 98key keyboard, 14609 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 14610 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 14611 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 14612 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 14613 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 14614 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 14615 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, 14616 att615-103k|AT&T 615; 80 column; 103key keyboard, 14617 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, 14618 att615-103k-w|AT&T 615; 132 column; 103key keyboard, 14619 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, 14620 # (att620: I added <rmam>/<smam> based on the init string and 14621 # <rin>/<indn> from a BSD termcap -- esr) 14622 att620|AT&T 620; 80 column; 98key keyboard, 14623 am, eslok, hs, mir, msgr, xenl, xon, 14624 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 14625 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14626 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 14627 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14628 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 14629 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14630 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 14631 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 14632 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 14633 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 14634 invis=\E[8m, 14635 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, 14636 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, 14637 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 14638 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 14639 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, 14640 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, 14641 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, 14642 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, 14643 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, 14644 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, 14645 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, 14646 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 14647 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, 14648 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 14649 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 14650 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 14651 ri=\EM, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l, 14652 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, 14653 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 14654 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;, 14655 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, 14656 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 14657 tsl=\E7\E[25;%i%p1%dx, use=decid+cpr, use=ecma+index, 14658 use=att610+cvis, 14659 att620-w|AT&T 620; 132 column; 98key keyboard, 14660 cols#132, wsl#132, 14661 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 14662 use=att620, 14663 att620-103k|AT&T 620; 80 column; 103key keyboard, 14664 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 14665 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 14666 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 14667 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 14668 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 14669 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 14670 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r, 14671 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, 14672 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, 14673 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, 14674 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, 14675 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, 14676 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 14677 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 14678 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, 14679 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, 14680 14681 att620-103k-w|AT&T 620; 132 column; 103key keyboard, 14682 cols#132, wsl#132, 14683 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 14684 use=att620-103k, 14685 14686 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal 14687 # The following SETUP modes are assumed for normal operation: 14688 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF 14689 # Font_Size=Large Non-Layers_Window_Cols=80 14690 # Non-Layers_Window_Rows=60 14691 # Other SETUP modes may be set for operator convenience or communication 14692 # requirements. Some capabilities assume a printer attached to the Aux EIA 14693 # port. This termcap description is for the Fixed Non-Layers Window. No 14694 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 14695 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr) 14696 att630|AT&T 630 windowing terminal, 14697 OTbs, am, da, db, mir, msgr, npc, xon, 14698 cols#80, it#8, lines#60, lm#0, 14699 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r, 14700 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 14701 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14702 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 14703 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 14704 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 14705 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[m, kbs=^H, kcbt=\E[Z, 14706 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14707 kdch1=\E[P, kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq, 14708 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, 14709 kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{, 14710 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H, 14711 kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=\r\n, 14712 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM, 14713 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7, 14714 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7 14715 %;m, 14716 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 14717 use=ansi+cpr, use=ecma+index, 14718 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, 14719 lines#24, use=att630, 14720 14721 # This is the att700 entry for 700 native emulation of the AT&T 700 14722 # terminal. Comments are relative to changes from the 605V2 entry and 14723 # att730 on which the entry is based. Comments show the terminfo 14724 # capability name, termcap name, and description. 14725 # 14726 # Here is what's going onm in the init string: 14727 # ESC [ 50;4| set 700 native mode (really is 605) 14728 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) 14729 # ESC [ 53;0| set GenFlow to Xon/Xoff 14730 # ESC [ 8 ;0| set CR on NL 14731 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) 14732 # ESC [ ? 4 l jump scroll 14733 # ESC [ ? 5 l/h video: normal (l); reverse (h) 14734 # ESC [ ?13 l Labels on 14735 # ESC [ ?15 l parity check = no 14736 # ESC [ 13 l monitor mode off 14737 # ESC [ 20 l LF on NL (not CRLF on NL) 14738 # ESC [ ? 7 h autowrap on 14739 # ESC [ 12 h local echo off 14740 # ESC ( B GO = ASCII 14741 # ESC ) 0 G1 = Special Char & Line Drawing 14742 # ESC [ ? 31 l Set 7 bit controls 14743 # 14744 # Note: Most terminals, especially the 600 family use Reverse Video for 14745 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition 14746 # Assume we should stay with reverse video for 70.. However, the 605V2 exits 14747 # standout mode with \E[m (all normal attributes). The 730 entry simply 14748 # exits reverse video which would leave other current attributes intact. It 14749 # was assumed the 730 entry to be more correct so rmso has changed. The 14750 # 605V2 has no sequences to turn individual attributes off, thus its setting 14751 # and the rmso/smso settings from the 730. 14752 # 14753 # Note: For the same reason as above in rmso I changed exit under-score mode 14754 # to specifically turn off underscore, rather than return to all normal 14755 # attributes 14756 # 14757 # Note: The following pkey_xmit is taken from the 605V2 which contained the 14758 # capability as pfxl. It was changed here to pfx since pfxl 14759 # will only compile successfully with Unix 4.0 tic. Also note that pfx only 14760 # allows strings to be parameters and label values must be programmed as 14761 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels 14762 # and strings to be parameters. The 605V2 pfx entry should be examined later 14763 # in this regard. For reference the 730 pfxl entry is shown here for comparison 14764 # 730 pfx entry: 14765 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s 14766 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, 14767 # 14768 # (for 4.0 tic) 14769 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 14770 # 14771 # (for <4.0 tic) 14772 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 14773 # 14774 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 14775 # 14776 # Port1 Interface 14777 # 14778 # modular 10 pin Connector 14779 # Left side Right side 14780 # Pin 1 2 3 4 5 6 7 8 9 10 14781 # 14782 # Key (notch) at bottom 14783 # 14784 # Pin 1 DSR 14785 # 3 DCD 14786 # 4 DTR 14787 # 5 Sig Ground 14788 # 6 RD 14789 # 7 SD 14790 # 8 CTS 14791 # 9 RTS 14792 # 10 Frame Ground 14793 # 14794 # The manual is 189 pages and is loaded with details about the escape codes, 14795 # etc..... Available from AT&T CIC 800-432-6600... 14796 # ask for Document number 999-300-660.. 14797 # 14798 att700|AT&T 700 24x80 column display w/102key keyboard, 14799 am, eslok, hs, mir, msgr, xenl, xon, 14800 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 14801 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14802 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 14803 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14804 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 14805 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14806 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 14807 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 14808 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, 14809 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 14810 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, 14811 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h 14812 \E(B\E)0\E[?31l\E[0m\017, 14813 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, 14814 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14815 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, 14816 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, 14817 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, 14818 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, 14819 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, 14820 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, 14821 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, 14822 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, 14823 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, 14824 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 14825 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, 14826 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 14827 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s 14828 \s\s\s\s\s\s%;%p2%s, 14829 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 14830 ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, 14831 rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, 14832 sc=\E7, 14833 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 14834 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 14835 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, 14836 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, 14837 tsl=\E7\E[99;%i%p1%dx, use=decid+cpr, use=ansi+rep, 14838 use=att610+cvis0, 14839 14840 # This entry was modified 3/13/90 by JWE. 14841 # fixes include additions of <enacs>, correcting <rep>, and modification 14842 # of <kHOM>. (See comments below) 14843 # att730 has status line of 80 chars 14844 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>, 14845 # the <kf25> and up keys are used for shifted system Fkeys 14846 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is 14847 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1 14848 # and 122 key keyboards, the 730's translation is \E[2J. For consistency 14849 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the 14850 # 102, 102+1, or 122 key keyboards 14851 # kHOM=\E[2J, 14852 # (att730: I added <rmam>/<smam> based on the init string -- esr) 14853 att730|AT&T 730 windowing terminal, 14854 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, 14855 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, 14856 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14857 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 14858 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 14859 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 14860 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 14861 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 14862 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 14863 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 14864 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 14865 ind=\ED, invis=\E[8m, 14866 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, 14867 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 14868 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 14869 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 14870 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, 14871 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, 14872 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, 14873 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, 14874 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, 14875 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, 14876 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, 14877 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, 14878 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 14879 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, 14880 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 14881 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25} 14882 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, 14883 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, 14884 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 14885 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, 14886 rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, 14887 sc=\E7, 14888 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1 14889 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 14890 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 14891 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, 14892 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=decid+cpr, 14893 use=ansi+rep, use=att610+cvis, 14894 # "MGT" is "Multi-Tasking Graphics Terminal" 14895 att730-41|730MTG-41|AT&T 730-41 windowing terminal, 14896 lines#41, use=att730, 14897 att730-24|730MTG-24|AT&T 730-24 windowing terminal, 14898 lines#24, use=att730, 14899 att730r|730MTGr|AT&T 730 rev video windowing terminal, 14900 flash=\E[?5l$<200>\E[?5h, 14901 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730, 14902 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal, 14903 lines#41, use=att730r, 14904 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal, 14905 lines#24, use=att730r, 14906 14907 # The following represents the screen layout along with the associated 14908 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do 14909 # not appear on the screen but are shown to reference the bezel buttons. 14910 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate 14911 # position relative to the screen. 14912 # 14913 # 14914 # 14915 # +----------------------------------------------------------------+ 14916 # | | 14917 # XXXX | kf0 kf24 | XXXX 14918 # | | 14919 # | | 14920 # XXXX | kf1 kf23 | XXXX 14921 # | | 14922 # | | 14923 # XXXX | kf2 kf22 | XXXX 14924 # | | 14925 # | | 14926 # XXXX | kf3 kf21 | XXXX 14927 # | | 14928 # | | 14929 # XXXX | kf4 kf20 | XXXX 14930 # | | 14931 # | | 14932 # XXXX | kf5 kf19 | XXXX 14933 # | | 14934 # | | 14935 # XXXX | kf6 kf18 | XXXX 14936 # | | 14937 # | | 14938 # XXXX | | XXXX 14939 # | | 14940 # | | 14941 # +----------------------------------------------------------------+ 14942 # 14943 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX 14944 # 14945 # Note: XXXX represents the screen buttons 14946 # CMD REDRAW 14947 # 14948 # MAIL 14949 # 14950 # version 1 note: 14951 # The character string sent by key 'kf26' may be user programmable 14952 # to send either \E[16s, or \E[26s. 14953 # The character string sent by key 'krfr' may be user programmable 14954 # to send either \E[17s, or \E[27s. 14955 # 14956 # Depression of the "CMD" key sends \E! (kcmd) 14957 # Depression of the "MAIL" key sends \E[26s (kf26) 14958 # "REDRAW" same as "REFRESH" (krfr) 14959 # 14960 # "kf" functions adds carriage return to output string if terminal is in 14961 # 'new line' mode. 14962 # 14963 # The following are functions not covered in the table above: 14964 # 14965 # Set keyboard character (SKC): \EPn1;Pn2w 14966 # Pn1= 0 Back Space key 14967 # Pn1= 1 Break key 14968 # Pn2= Program char (hex) 14969 # 14970 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t 14971 # Pn1= Window number (1-39) 14972 # Pn2-Pn5= Y;X;Y;X coordinates 14973 # 14974 # Screen Selection (SSL): \E[Pnu 14975 # Pn= Window number 14976 # 14977 # Set Terminal Modes (SM): \E[Pnh 14978 # Pn= 3 Graphics mode 14979 # Pn= > Cursor blink 14980 # Pn= < Enter new line mode 14981 # Pn= = Enter reverse insert/replace mode 14982 # Pn= ? Enter no scroll mode 14983 # 14984 # Reset Terminal Mode (RM): \E[Pnl 14985 # Pn= 3 Exit graphics mode 14986 # Pn= > Exit cursor blink 14987 # Pn= < Exit new line mode 14988 # Pn= = Exit reverse insert/replace mode 14989 # Pn= ? Exit no scroll mode 14990 # 14991 # Screen Status Report (SSR): \E[Pnp 14992 # Pn= 0 Request current window number 14993 # Pn= 1 Request current window dimensions 14994 # 14995 # Device Status Report (DSR): \E[6n Request cursor position 14996 # 14997 # Call Status Report (CSR): \E[Pnv 14998 # Pn= 0 Call failed 14999 # Pn= 1 Call successful 15000 # 15001 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string 15002 # Pn1= Button number to be loaded 15003 # Pn2= Character count of "string" 15004 # Pn3= Key mode being loaded: 15005 # 0= Unshifted 15006 # 1= Shifted 15007 # 2= Control 15008 # String= Text string (15 chars max) 15009 # 15010 # Screen Number Report (SNR): \E[Pnp 15011 # Pn= Screen number 15012 # 15013 # Screen Dimension Report (SDR): \E[Pn1;Pn2r 15014 # Pn1= Number of rows available in window 15015 # Pn2= Number of columns available in window 15016 # 15017 # Cursor Position Report (CPR): \E[Pn1;Pn2R 15018 # Pn1= "Y" Position of cursor 15019 # Pn2= "X" Position of cursor 15020 # 15021 # Request Answer Back (RAB): \E[c 15022 # 15023 # Answer Back Response (ABR): \E[?;*;30;VSV 15024 # *= 0 No printer available 15025 # *= 2 Printer available 15026 # V= Software version number 15027 # SV= Software sub version number 15028 # (printer-available field not documented in v1) 15029 # 15030 # Screen Alignment Aid: \En 15031 # 15032 # Bell (lower pitch): \E[x 15033 # 15034 # Dial Phone Number: \EPdstring\ 15035 # string= Phone number to be dialed 15036 # 15037 # Set Phone Labels: \EPpstring\ 15038 # string= Label for phone buttons 15039 # 15040 # Set Clock: \EPchour;minute;second\ 15041 # 15042 # Position Clock: \EPsY;X\ 15043 # Y= "Y" coordinate 15044 # X= "X" coordinate 15045 # 15046 # Delete Clock: \Epr\ 15047 # 15048 # Programming The Function Buttons: \EPfPn;string\ 15049 # Pn= Button number (00-06, 18-24) 15050 # (kf00-kf06, kf18-kf24) 15051 # string= Text to sent on button depression 15052 # 15053 # The following in version 2 only: 15054 # 15055 # Request For Local Directory Data: \EPp12;\ 15056 # 15057 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ 15058 # 15059 # Request for Local Directory Data in print format: \EPp13;\ 15060 # 15061 # Enable 'Prt on Line' mode: \022 (DC2) 15062 # 15063 # Disable 'Prt on Line' mode: \024 (DC4) 15064 # 15065 15066 # 05-Aug-86: 15067 # The following Terminfo entry describes functions which are supported by 15068 # the AT&T 5430/pt505 terminal software version 2 and later. 15069 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, 15070 am, xon, 15071 cols#80, it#8, lines#24, 15072 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 15073 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, 15074 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D, 15075 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 15076 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 15077 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 15078 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I, 15079 il=\E[%p1%dL, il1=\E[L, ind=\n, 15080 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l, 15081 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 15082 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, 15083 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, 15084 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s, 15085 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, 15086 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 15087 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, 15088 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, 15089 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, 15090 use=ansi+cpr, 15091 15092 # The following Terminfo entry describes functions which are supported by 15093 # the AT&T 5430/pt505 terminal software version 1. 15094 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, 15095 lines#24, 15096 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, 15097 att505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, 15098 lines#22, use=att505, 15099 # 15100 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- 15101 # This cut mark helps make life less painful for people running ncurses tic 15102 # on machines with relatively little RAM. The file can be broken in half here 15103 # cleanly and compiled in sections -- no `use' references cross this cut 15104 # going forward. 15105 # 15106 15107 #### Ampex (Dialogue) 15108 # 15109 # Yes, these are the same people who are better-known for making audio- and 15110 # videotape. I'm told they are located in Redwood City, CA. 15111 # 15112 15113 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981 15114 # (ampex80: some capabilities merged in from SCO's entry -- esr) 15115 ampex80|a80|d80|dialogue|dialogue80|Ampex dialogue 80, 15116 OTbs, am, bw, ul, 15117 cols#80, it#8, lines#24, 15118 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n, 15119 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 15120 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, 15121 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em, 15122 smso=\Ej, smul=\El, tbc=\E3, 15123 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: 15124 ampex175|Ampex d175, 15125 am, 15126 cols#80, lines#24, 15127 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 15128 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 15129 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n, 15130 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, 15131 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, 15132 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, 15133 # No backspace key in the main QWERTY cluster. Fortunately, it has a 15134 # NEWLINE/PAGE key just above RETURN that sends a strange single-character 15135 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS 15136 # mode), this key can be used as the erase key; I find I like this. Because 15137 # some people and some systems may not, there is another termcap ("ampex175") 15138 # that suppresses this little eccentricity by omitting the relevant capability. 15139 ampex175-b|Ampex d175 using left arrow for erase, 15140 kbs=^_, use=ampex175, 15141 # From: Richard Bascove <atd!dsd!rcb (at] ucbvax.berkeley.edu> 15142 # (ampex210: removed obsolete ":kn#10:" -- esr) 15143 ampex210|a210|Ampex a210, 15144 OTbs, am, hs, xenl, 15145 cols#80, it#8, lines#24, xmc#1, 15146 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, 15147 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 15148 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, 15149 fsl=\E.2, home=^^, ht=^I, ich1=\EQ, 15150 if=/usr/share/tabset/std, il1=\EE, invis@, 15151 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, 15152 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 15153 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 15154 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, 15155 tsl=\E.0\Eg\E}\Ef, use=adm+sgr, 15156 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis> 15157 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>, 15158 # and moved the padding to be *after* the caps -- esr) 15159 ampex219|ampex-219|amp219|Ampex with automargins, 15160 hs, xenl, 15161 cols#80, it#8, lines#24, 15162 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, 15163 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r, 15164 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, 15165 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, 15166 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, 15167 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n, 15168 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 15169 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, 15170 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, 15171 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 15172 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, 15173 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, 15174 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, 15175 ampex219w|ampex-219w|amp219w|Ampex 132 cols, 15176 cols#132, 15177 cud1=\n, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 15178 use=ampex219, 15179 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr) 15180 ampex232|ampex-232|Ampex Model 232, 15181 am, 15182 cols#80, lines#24, xmc#1, 15183 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, 15184 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 15185 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, 15186 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, 15187 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, 15188 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 15189 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 15190 kf9=^AI\r, khome=^^, use=adm+sgr, 15191 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr) 15192 ampex232w|Ampex Model 232 / 132 columns, 15193 cols#132, 15194 is2=\E\034Eg\El, use=ampex232, 15195 15196 #### Ann Arbor (aa) 15197 # 15198 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge 15199 # numbers of function keys. At least some used monitors in portrait mode, 15200 # allowing up to 76-character screen heights! They were reachable at: 15201 # 15202 # Ann Arbor Terminals 15203 # 6175 Jackson Road 15204 # Ann Arbor, MI 48103 15205 # (313)-663-8000 15206 # 15207 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor 15208 # can't be found on the Web; I fear they're long dead. R.I.P. 15209 # 15210 15211 15212 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. 15213 # Highly modified 6/22 by Mike O'Brien. 15214 # split out into several for the various screen sizes by dave-yost@rand 15215 # Modifications made 3/82 by Mark Horton 15216 # Modified by Tom Quarles at UCB for greater efficiency and more diversity 15217 # status line moved to top of screen, <flash> removed 5/82 15218 # Some unknown person at SCO then hacked the init strings to make them more 15219 # efficient. 15220 # 15221 # assumes the following setup: 15222 # A menu: 0000 1010 0001 0000 15223 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 15224 # C menu: 56 66 0 0 9600 0110 1100 15225 # D menu: 0110 1001 1 0 15226 # 15227 # Briefly, the settings are for the following modes: 15228 # (values are for bit set/clear with * indicating our preference 15229 # and the value used to test these termcaps) 15230 # Note that many of these settings are irrelevant to the terminfo 15231 # and are just set to the default mode of the terminal as shipped 15232 # by the factory. 15233 # 15234 # A menu: 0000 1010 0001 0000 15235 # Block/underline cursor* 15236 # blinking/nonblinking cursor* 15237 # key click/no key click* 15238 # bell/no bell at column 72* 15239 # 15240 # key pad is cursor control*/key pad is numeric 15241 # return and line feed/return for <cr> key * 15242 # repeat after .5 sec*/no repeat 15243 # repeat at 25/15 chars per sec. * 15244 # 15245 # hold data until pause pressed/process data unless pause pressed* 15246 # slow scroll/no slow scroll* 15247 # Hold in area/don't hold in area* 15248 # functions keys have default*/function keys disabled on powerup 15249 # 15250 # show/don't show position of cursor during page transmit* 15251 # unused 15252 # unused 15253 # unused 15254 # 15255 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 15256 # Baud rate (9600*) 15257 # 15258 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark 15259 # 1 stop bit*/2 stop bits 15260 # parity error detection off*/on 15261 # 15262 # keyboard local/on line* 15263 # half/full duplex* 15264 # disable/do not disable keyboard after data transmission* 15265 # 15266 # transmit entire page/stop transmission at cursor* 15267 # transfer/do not transfer protected characters* 15268 # transmit all characters/transmit only selected characters* 15269 # transmit all selected areas/transmit only 1 selected area* 15270 # 15271 # transmit/do not transmit line separators to host* 15272 # transmit/do not transmit page tab stops tabs to host* 15273 # transmit/do not transmit column tab stop tabs to host* 15274 # transmit/do not transmit graphics control (underline,inverse..)* 15275 # 15276 # enable*/disable auto XON/XOFF control 15277 # require/do not require receipt of a DC1 from host after each LF* 15278 # pause key acts as a meta key/pause key is pause* 15279 # unused 15280 # 15281 # unused 15282 # unused 15283 # unused 15284 # unused 15285 # 15286 # XON character (17*) 15287 # XOFF character (19*) 15288 # 15289 # C menu: 56 66 0 0 9600 0110 1100 15290 # number of lines to print data on (printer) (56*) 15291 # 15292 # number of lines on a sheet of paper (printer) (66*) 15293 # 15294 # left margin (printer) (0*) 15295 # 15296 # number of pad chars on new line to printer (0*) 15297 # 15298 # printer baud rate (9600*) 15299 # 15300 # printer parity: 00=odd,01=even*,10=space,11=mark 15301 # printer stop bits: 2*/1 15302 # print/do not print guarded areas* 15303 # 15304 # new line is: 01=LF,10=CR,11=CRLF* 15305 # unused 15306 # unused 15307 # 15308 # D menu: 0110 1001 1 0 15309 # LF is newline/LF is down one line, same column* 15310 # wrap to preceding line if move left from col 1*/don't wrap 15311 # wrap to next line if move right from col 80*/don't wrap 15312 # backspace is/is not destructive* 15313 # 15314 # display*/ignore DEL character 15315 # display will not/will scroll* 15316 # page/column tab stops* 15317 # erase everything*/erase unprotected only 15318 # 15319 # editing extent: 0=display,1=line*,2=field,3=area 15320 # 15321 # unused 15322 # 15323 15324 annarbor4080|aa4080|Ann Arbor 4080, 15325 OTbs, am, 15326 cols#80, lines#40, 15327 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_, 15328 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t 15329 %{12}%+%;%{64}%+%c, 15330 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H, 15331 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, 15332 15333 # Strange Ann Arbor terminal from BRL 15334 aas1901|Ann Arbor K4080 w/S1901 mod, 15335 am, 15336 cols#80, lines#40, 15337 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N, 15338 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c, 15339 nel=\r\n, 15340 15341 # If you're using the GNU termcap library, add 15342 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: 15343 # to these capabilities. This is the nonstandard GNU termcap scrolling 15344 # capability, arguments are: 15345 # 1. Total number of lines on the screen. 15346 # 2. Number of lines above desired scroll region. 15347 # 3. Number of lines below (outside of) desired scroll region. 15348 # 4. Total number of lines on the screen, the same as the first parameter. 15349 # The generic Ann Arbor entry is the only one that uses this. 15350 aaa+unk|aaa-unk|Ann Arbor Ambassador (internal - don't use this directly), 15351 OTbs, am, km, mc5i, mir, xon, 15352 cols#80, it#8, 15353 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 15354 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H, 15355 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 15356 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 15357 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 15358 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 15359 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, 15360 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, 15361 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, 15362 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 15363 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, 15364 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, 15365 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, 15366 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, 15367 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, 15368 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, 15369 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rev=\E[7m, 15370 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E 15371 \\, 15372 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, 15373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1; 15374 %;%?%p7%t8;%;m, 15375 sgr0=\E[m, 15376 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E 15377 \\, 15378 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 15379 vpa=\E[%p1%{1}%+%dd, use=ansi+rep, 15380 15381 aaa+rv|Ann Arbor Ambassador in reverse video, 15382 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, 15383 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 15384 rs1=\E[H\E[7m\E[J$<156>, 15385 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%|%t7 15386 ;%;%?%p7%t8;%;m\016, 15387 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, 15388 # Ambassador with the DEC option, for partial VT100 compatibility. 15389 aaa+dec|Ann Arbor Ambassador in DEC VT100 mode, 15390 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, 15391 csr=\E[%i%p1%d;%p2%dr, enacs=\E(B\E)0, rmacs=^O, 15392 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%? 15393 %p7%t8;%;m%?%p9%t\016%e\017%;, 15394 smacs=^N, 15395 aaa-18|Ann Arbor Ambassador/18 lines, 15396 lines#18, 15397 is2=\E7\E[60;0;0;18p\E8, 15398 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, 15399 use=aaa+unk, 15400 aaa-18-rv|Ann Arbor Ambassador/18 lines+reverse video, 15401 use=aaa+rv, use=aaa-18, 15402 aaa-20|Ann Arbor Ambassador/20 lines, 15403 lines#20, 15404 is2=\E7\E[60;0;0;20p\E8, 15405 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, 15406 use=aaa+unk, 15407 aaa-22|Ann Arbor Ambassador/22 lines, 15408 lines#22, 15409 is2=\E7\E[60;0;0;22p\E8, 15410 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, 15411 use=aaa+unk, 15412 aaa-24|Ann Arbor Ambassador/24 lines, 15413 lines#24, 15414 is2=\E7\E[60;0;0;24p\E8, 15415 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, 15416 use=aaa+unk, 15417 aaa-24-rv|Ann Arbor Ambassador/24 lines+reverse video, 15418 use=aaa+rv, use=aaa-24, 15419 aaa-26|Ann Arbor Ambassador/26 lines, 15420 lines#26, 15421 is2=\E7\E[60;0;0;26p\E8, 15422 rmcup=\E[60;0;0;26p\E[26;1H\E[K, 15423 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, 15424 aaa-28|Ann Arbor Ambassador/28 lines, 15425 lines#28, 15426 is2=\E7\E[60;0;0;28p\E8, 15427 rmcup=\E[60;0;0;28p\E[28;1H\E[K, 15428 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, 15429 aaa-30-s|aaa-s|Ann Arbor Ambassador/30 lines w/status, 15430 eslok, hs, 15431 lines#29, 15432 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, 15433 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, 15434 rmcup=\E[60;1;0;30p\E[29;1H\E[K, 15435 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, 15436 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 15437 aaa-30-s-rv|aaa-s-rv|Ann Arbor Ambassador/30 lines+status+reverse video, 15438 use=aaa+rv, use=aaa-30-s, 15439 aaa-s-ctxt|aaa-30-s-ctxt|Ann Arbor Ambassador/30 lines+status+save context, 15440 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 15441 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, 15442 aaa-s-rv-ctxt|aaa-30-s-rv-ct|Ann Arbor Ambassador/30 lines+status+save context+reverse video, 15443 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 15444 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, 15445 aaa|aaa-30|ambas|ambassador|Ann Arbor Ambassador/30 lines, 15446 lines#30, 15447 is2=\E7\E[60;0;0;30p\E8, 15448 rmcup=\E[60;0;0;30p\E[30;1H\E[K, 15449 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, 15450 aaa-30-rv|aaa-rv|Ann Arbor Ambassador/30 lines in reverse video, 15451 use=aaa+rv, use=aaa-30, 15452 aaa-30-ctxt|aaa-ctxt|Ann Arbor Ambassador/30 lines; saving context, 15453 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 15454 use=aaa-30, 15455 aaa-30-rv-ctxt|aaa-rv-ctxt|Ann Arbor Ambassador/30 lines reverse video; saving context, 15456 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 15457 use=aaa+rv, use=aaa-30, 15458 aaa-36|Ann Arbor Ambassador/36 lines, 15459 lines#36, 15460 is2=\E7\E[60;0;0;36p\E8, 15461 rmcup=\E[60;0;0;36p\E[36;1H\E[K, 15462 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, 15463 aaa-36-rv|Ann Arbor Ambassador/36 lines+reverse video, 15464 use=aaa+rv, use=aaa-36, 15465 aaa-40|Ann Arbor Ambassador/40 lines, 15466 lines#40, 15467 is2=\E7\E[60;0;0;40p\E8, 15468 rmcup=\E[60;0;0;40p\E[40;1H\E[K, 15469 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, 15470 aaa-40-rv|Ann Arbor Ambassador/40 lines+reverse video, 15471 use=aaa+rv, use=aaa-40, 15472 aaa-48|Ann Arbor Ambassador/48 lines, 15473 lines#48, 15474 is2=\E7\E[60;0;0;48p\E8, 15475 rmcup=\E[60;0;0;48p\E[48;1H\E[K, 15476 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, 15477 aaa-48-rv|Ann Arbor Ambassador/48 lines+reverse video, 15478 use=aaa+rv, use=aaa-48, 15479 aaa-60-s|Ann Arbor Ambassador/59 lines+status, 15480 eslok, hs, 15481 lines#59, 15482 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, 15483 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, 15484 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 15485 aaa-60-s-rv|Ann Arbor Ambassador/59 lines+status+reverse video, 15486 use=aaa+rv, use=aaa-60-s, 15487 aaa-60-dec-rv|Ann Arbor Ambassador/DEC mode+59 lines+status+rev video, 15488 use=aaa+dec, use=aaa+rv, use=aaa-60-s, 15489 aaa-60|Ann Arbor Ambassador/60 lines, 15490 lines#60, 15491 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, 15492 use=aaa+unk, 15493 aaa-60-rv|Ann Arbor Ambassador/60 lines+reverse video, 15494 use=aaa+rv, use=aaa-60, 15495 aaa-db|Ann Arbor Ambassador 30/destructive backspace, 15496 OTbs@, 15497 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30, 15498 15499 guru|guru-33|guru+unk|Ann Arbor guru/33 lines 80 cols, 15500 lines#33, 15501 flash=\E[>59h$<100>\E[>59l, 15502 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, 15503 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk, 15504 guru+rv|guru changes for reverse video, 15505 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, 15506 guru-rv|guru-33-rv|Ann Arbor guru/33 lines+reverse video, 15507 use=guru+rv, use=guru-33, 15508 guru+s|guru status line, 15509 eslok, hs, 15510 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, 15511 rmcup=\E[255;1p\E[255;1H\E[K, smcup=, 15512 tsl=\E[>51h\E[1;%p1%dH\E[2K, 15513 guru-nctxt|guru with no saved context, 15514 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, 15515 guru-s|guru-33-s|Ann Arbor guru/33 lines+status, 15516 lines#32, 15517 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, 15518 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 15519 guru-24|Ann Arbor guru 24 lines, 15520 cols#80, lines#24, 15521 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, 15522 use=guru+unk, 15523 guru-44|Ann Arbor guru 44 lines, 15524 cols#97, lines#44, 15525 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, 15526 use=guru+unk, 15527 guru-44-s|Ann Arbor guru/44 lines+status, 15528 lines#43, 15529 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, 15530 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 15531 guru-76|guru with 76 lines by 89 cols, 15532 cols#89, lines#76, 15533 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, 15534 use=guru+unk, 15535 guru-76-s|Ann Arbor guru/76 lines+status, 15536 cols#89, lines#75, 15537 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, 15538 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 15539 guru-76-lp|guru-lp|guru with page bigger than line printer, 15540 cols#134, lines#76, 15541 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, 15542 use=guru+unk, 15543 guru-76-w|guru 76 lines by 178 cols, 15544 cols#178, lines#76, 15545 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, 15546 use=guru+unk, 15547 guru-76-w-s|Ann Arbor guru/76 lines+status+wide, 15548 cols#178, lines#75, 15549 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, 15550 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 15551 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, 15552 cols#178, lines#76, 15553 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, 15554 use=guru+unk, 15555 aaa-rv-unk|Ann Arbor unknown type, 15556 lh#0, lw#0, nlab#0, 15557 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, 15558 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 15559 rs1=\E[H\E[7m\E[J, 15560 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t 15561 7;%;%?%p7%t8;%;m, 15562 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, 15563 15564 #### Applied Digital Data Systems (adds) 15565 # 15566 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made 15567 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for 15568 # terminals was merged again. Then AT&T sold the terminal business to 15569 # SunRiver, which later changed its name to Boundless Technologies. The 15570 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there 15571 # as of early 1995) are at: 15572 # 15573 # Boundless Technologies 15574 # 100 Marcus Boulevard 15575 # Hauppauge, NY 11788-3762 15576 # Vox: (800)-231-5445 15577 # Fax: (516)-342-7378 15578 # Web: http://boundless.com 15579 # 15580 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)". 15581 # In 1995 Boundless acquired DEC's terminals business. 15582 # 15583 15584 # Regent: lowest common denominator, works on all regents. 15585 # (regent: renamed ":bc:" to ":le:" -- esr) 15586 regent|ADDS Regent Series, 15587 OTbs, am, 15588 cols#80, lines#24, 15589 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z, 15590 home=\EY\s\s, ind=\n, ll=^A, 15591 # Regent 100 has a bug where if computer sends escape when user is holding 15592 # down shift key it gets confused, so we avoid escape. 15593 regent100|ADDS Regent 100, 15594 xmc#1, 15595 bel=^G, 15596 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 15597 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, 15598 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, 15599 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, 15600 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent, 15601 regent20|ADDS Regent 20, 15602 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, 15603 use=regent, 15604 regent25|ADDS Regent 25, 15605 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A, 15606 use=regent20, 15607 regent40|ADDS Regent 40, 15608 xmc#1, 15609 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r, 15610 kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, 15611 kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, 15612 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, 15613 smul=\E0`, use=regent25, 15614 regent40+|ADDS Regent 40+, 15615 is2=\EB, use=regent40, 15616 # It uses a different code for mapping acs vs dim/blink. 15617 regent60|regent200|adds200|ADDS Regent 60, 15618 acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek, 15619 is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF, 15620 krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1, 15621 smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r, 15622 kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r, 15623 use=regent40+, 15624 # From: <edward (at] onyx.berkeley.edu> Thu Jul 9 09:27:33 1981 15625 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr) 15626 viewpoint|addsviewpoint|ADDS Viewpoint, 15627 OTbs, am, 15628 cols#80, lines#24, 15629 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n, 15630 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 15631 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, 15632 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, 15633 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, 15634 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, 15635 # Some viewpoints have bad ROMs that foo up on ^O 15636 screwpoint|ADDS Viewpoint with ^O bug, 15637 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, 15638 15639 # From: Jay S. Rouman <jsr (at] dexter.mi.org> 5 Jul 92 15640 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs. 15641 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, 15642 # underline=01100000, rev=01010000, blink=01000010,dim=01000001, 15643 # invis=01000100 and %c is the logical or of desired attributes. 15644 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. 15645 # 15646 # Update by TD - 2004: 15647 # Adapted from 15648 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt 15649 # 15650 # COMMANDS ASCII CODE 15651 # 15652 # Address, Absolute ESC,=,row,column 15653 # Beep BEL 15654 # Aux Port Enable ESC,@ 15655 # Aux Port Disable ESC,A 15656 # Backspace BS 15657 # Cursor back BS 15658 # Cursor down LF 15659 # Cursor forward FF 15660 # Cursor home RS 15661 # Cursor up VT 15662 # Cursor suppress ETB 15663 # Cursor enable CAN 15664 # Erase to end of line ESC,T 15665 # Erase to end of page ESC,Y 15666 # Erase screen SUB 15667 # Keyboard lock SI 15668 # Keyboard unlock SO 15669 # Read current cursor position ESC,? 15670 # Set Attribute ESC,0,x (see below for values of x) 15671 # Tag bit reset ESC,( 15672 # Tag bit set ESC,) 15673 # Transparent Print on ESC,3 15674 # Transparent Print off ESC,4 15675 # 15676 # 15677 # ATTRIBUTES 15678 # 15679 # Normal @ 0100 15680 # Half Intensity A 0101 15681 # Blinking B 0102 15682 # Half Intensity Blinking C 0103 15683 # Reverse Video P 0120 15684 # Reverse Video Half Intensity Q 0121 15685 # Reverse Video Blinking R 0122 15686 # Reverse Video Half Intensity 15687 # Blinking S 0123 15688 # Underlined ` 0140 15689 # Underlined Half Intensity a 0141 15690 # Underlined Blinking b 0142 15691 # Underlined Half Intensity 15692 # Blinking c 0143 15693 # Video suppress D 0104 15694 vp3a+|viewpoint3a+|ADDS Viewpoint 3a+, 15695 am, bw, 15696 cols#80, it#8, lines#24, 15697 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r, 15698 cub1=^H, cud1=\n, cuf1=^L, 15699 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E), 15700 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E), 15701 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, 15702 nel=\r\n, rev=\E0P\E), rmso=\E(, 15703 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%; 15704 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t 15705 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;, 15706 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E), 15707 vp60|viewpoint60|addsvp60|ADDS Viewpoint60, 15708 use=regent40, 15709 # 15710 # adds viewpoint 90 - from cornell 15711 # Note: emacs sends ei occasionally to insure the terminal is out of 15712 # insert mode. This unfortunately puts the viewpoint90 IN insert 15713 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also, 15714 # - :ei=:im=: must be present in the termcap translation.) 15715 # - <xhp> indicates glitch that attributes stick to location 15716 # - <msgr> means it's safe to move in standout mode 15717 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting 15718 # the status line 15719 # Function key and label capabilities merged in from SCO. 15720 vp90|viewpoint90|ADDS Viewpoint 90, 15721 OTbs, bw, msgr, xhp, 15722 cols#80, lines#24, 15723 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F, 15724 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, 15725 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, 15726 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n, 15727 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, 15728 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 15729 kf7=^B8\r, kf8=^B9\r, kf9=^B:\r, khome=^A, lf0=F1, lf1=F2, 15730 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, 15731 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, 15732 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, 15733 # Note: if return acts weird on a980, check internal switch #2 15734 # on the top chip on the CONTROL pc board. 15735 adds980|a980|ADDS Consul 980, 15736 OTbs, am, 15737 cols#80, lines#24, 15738 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n, 15739 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, 15740 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1, 15741 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, 15742 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, 15743 15744 #### C. Itoh Electronics 15745 # 15746 # As of 1995 these people no longer make terminals (they're still in the 15747 # printer business). Their terminals were all clones of the DEC VT series. 15748 # They're located in Orange County, CA. 15749 # 15750 15751 # CIT 80 - vt-52 emulator, the termcap has been modified to remove 15752 # the delay times and do an auto tab set rather than the indirect 15753 # file used in vt100. 15754 cit80|cit-80|citoh 80, 15755 OTbs, am, 15756 cols#80, lines#24, 15757 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C, 15758 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, 15759 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 15760 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, 15761 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985 15762 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr) 15763 cit101|citc|C. Itoh fast VT100, 15764 OTbs, am, xenl, 15765 cols#80, lines#24, 15766 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B, 15767 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 15768 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 15769 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, 15770 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, 15771 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 15772 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 15773 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 15774 smul=\E[4m, 15775 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL 15776 # The following termcap entry was created from the Callan cd100 entry. The 15777 # last two lines (with the capabilities in caps) are used by RM-cobol to allow 15778 # full selection of combinations of reverse video, underline, and blink. 15779 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ 15780 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ 15781 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) 15782 cit101e|C. Itoh CIT-101e, 15783 OTbs, OTpt, am, mir, msgr, 15784 cols#80, it#8, lines#24, 15785 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, 15786 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, 15787 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, 15788 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, 15789 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, 15790 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, 15791 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, 15792 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, 15793 smkx=\E=, smso=\E[7m, smul=\E[4m, 15794 # From: David S. Lawyer, June 1997: 15795 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE 15796 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the 15797 # late 1980's CIT Terminals went out of business. 15798 # There is no need to use the initialization string is=... (by invoking 15799 # tset or setterm etc.) provided that the terminal has been manually set 15800 # up (and the setup saved with ^S) to be compatible with this termcap. To be 15801 # compatible it should be in ANSI mode (not VT52). A set-up that 15802 # works is to set all the manually settable stuff to factory defaults 15803 # by pressing ^D in set-up mode. Then increase the brightness with the 15804 # up-arrow key since the factory default will likely be dim on an old 15805 # terminal. Then change any options you want (provided that they are 15806 # compatible with the termcap). For my terminal I set: Screen 15807 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: 15808 # on. I also set up mine for parity (but you may not need it). Then 15809 # save the setup with ^S. 15810 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr) 15811 cit101e-rv|C. Itoh CIT-101e (sets reverse video), 15812 am, eo, mir, msgr, xenl, xon, 15813 cols#80, it#8, lines#24, 15814 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 15815 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r, 15816 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 15817 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 15818 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 15819 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 15820 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, 15821 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 15822 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 15823 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E( 15824 B\E[m\E[20l\E[1;24r\E[24;1H, 15825 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 15826 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, 15827 rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 15828 rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m, 15829 smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m, 15830 smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u8=\E[?6c, 15831 use=ansi+enq, use=ecma+index, 15832 cit101e-n|CIT-101e w/o am, 15833 am@, 15834 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n, 15835 use=cit101e, 15836 cit101e-132|CIT-101e with 132 cols, 15837 cols#132, 15838 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e, 15839 cit101e-n132|CIT-101e with 132 cols w/o am, 15840 am@, 15841 cols#132, 15842 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n, 15843 use=cit101e, 15844 # CIE Terminals CIT-500 from BRL 15845 # The following SET-UP modes are assumed for normal operation: 15846 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF 15847 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES 15848 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF 15849 # Other SET-UP modes may be set for operator convenience or communication 15850 # requirements. 15851 # Hardware tabs are assumed to be set every 8 columns; they can be set up 15852 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use 15853 # "stty ixon -ixany" to enable DC3/DC1 flow control! 15854 # (cit500: I added <rmam>/<smam> based on the init string -- esr) 15855 cit500|CIE Terminals CIT-500, 15856 OTbs, OTpt, mir, msgr, xon, 15857 OTkn#10, cols#80, it#8, lines#64, vt#3, 15858 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 15859 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr, 15860 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 15861 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15862 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15863 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 15864 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, 15865 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, 15866 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 15867 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, 15868 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, 15869 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, 15870 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, 15871 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 15872 rmso=\E[m, rmul=\E[m, 15873 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, 15874 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 15875 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 15876 15877 # C. Itoh printers begin here 15878 citoh|ci8510|8510|C. Itoh 8510a, 15879 cols#80, it#8, 15880 bold=\E!, cub1@, 15881 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., 15882 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, 15883 smul=\EX, use=lpr, 15884 citoh-pica|citoh in pica, 15885 is1=\EN, use=citoh, 15886 citoh-elite|citoh in elite, 15887 cols#96, 15888 is1=\EE, 15889 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089 15890 ., 15891 use=citoh, 15892 citoh-comp|citoh in compressed, 15893 cols#136, 15894 is1=\EQ, 15895 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089 15896 \,097\,105\,113\,121\,129., 15897 use=citoh, 15898 # citoh has infinite cols because we don't want lp ever inserting \n\t**. 15899 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, 15900 cols#0x7fff, 15901 is1=\EP, use=citoh, 15902 citoh-6lpi|citoh in 6 lines per inch mode, 15903 is3=\EA, use=citoh, 15904 citoh-8lpi|citoh in 8 lines per inch mode, 15905 lines#88, 15906 is3=\EB, use=citoh, 15907 15908 #### Control Data (cdc) 15909 # 15910 15911 cdc456|CDC 456 terminal, 15912 OTbs, am, 15913 cols#80, lines#24, 15914 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 15915 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, 15916 el=^V, home=^Y, il1=\EL, ind=\n, 15917 15918 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) 15919 cdc721|CDC Viking, 15920 OTbs, am, 15921 cols#80, lines#24, 15922 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 15923 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I, 15924 kcuu1=^W, khome=^Y, 15925 cdc721ll|CDC Viking with long lines, 15926 OTbs, am, 15927 cols#132, lines#24, 15928 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 15929 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I, 15930 kcuu1=^W, khome=^Y, 15931 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out 15932 cdc752|CDC 752, 15933 OTbs, am, bw, xhp, 15934 cols#80, lines#24, 15935 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U, 15936 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, 15937 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017, 15938 # CDC 756 15939 # The following switch/key settings are assumed for normal operation: 15940 # 96 chars SCROLL FULL duplex not BLOCK 15941 # Other switches may be set according to communication requirements. 15942 # Insert/delete-character cannot be used, as the whole display is affected. 15943 # "so" & "se" are commented out until jove handles "sg" correctly. 15944 cdc756|CDC 756, 15945 OTbs, am, bw, 15946 OTkn#10, cols#80, lines#24, 15947 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U, 15948 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, 15949 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n, 15950 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI, 15951 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, 15952 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, 15953 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, 15954 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, 15955 rs1=^Y^X^B^C^O, 15956 # 15957 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL. 15958 # 15959 # Part of the long initialization string defines the "DOWN" key to the left 15960 # of the tab key to send an ESC. The real ESC key is positioned way out 15961 # in right field. 15962 # 15963 # The termcap won't work in 132 column mode due to the way it it moves the 15964 # cursor. Termcap doesn't have the capability (as far as I could tell) to 15965 # handle the 721 in 132 column mode. 15966 # 15967 # (cdc721: changed :ri: to :sr: -- esr) 15968 cdc721-esc|Control Data 721, 15969 OTbs, OTpt, am, bw, msgr, xon, 15970 OTkn#10, cols#80, it#8, lines#30, 15971 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, 15972 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, 15973 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, 15974 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, 15975 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036 15976 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036 15977 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s` 15978 !k/o, 15979 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, 15980 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, 15981 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, 15982 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], 15983 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\, 15984 tbc=^^^RY, 15985 15986 #### Getronics 15987 # 15988 # Getronics is a Dutch electronics company that at one time was called 15989 # `Geveke' and made async terminals; but (according to the company itself!) 15990 # they've lost all their documentation on the command set. The hardware 15991 # documentation suggests the terminals were actually manufactured by a 15992 # Taiwanese electronics company named Cal-Comp. There are known 15993 # to have been at least two models, the 33 and the 50. 15994 # 15995 15996 # The 50 seems to be a top end VT220 clone, with the addition of a higher 15997 # screen resolution, a larger screen, at least 1 page of memory above and 15998 # below the screen, apparently pages of memory right and left of the screen 15999 # which can be panned, and about 75 function keys (15 function keys x normal, 16000 # shift, control, func A, func B). It also has more setup possibilities than 16001 # the VT220. The monitor case is dated November 1978 and the keyboard case is 16002 # May 1982. 16003 # 16004 # The VT100 emulation works as is. The entry below describes the rather 16005 # non-conformant (but more featureful) ANSI mode. 16006 # 16007 # From: Stephen Peterson <stv (at] utrecht.ow.nl>, 27 May 1995 16008 visa50|Geveke VISA 50 terminal in ANSI 80 character mode, 16009 bw, mir, msgr, 16010 cols#80, lines#25, 16011 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, 16012 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, 16013 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 16014 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 16015 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16016 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, 16017 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l, 16018 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 16019 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, 16020 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, 16021 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, 16022 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, 16023 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, 16024 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, 16025 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, 16026 lf3=A insert line, lf4=A delete line, lf5=A clear, 16027 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, 16028 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l, 16029 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, 16030 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, 16031 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, 16032 vpa=\E[%i%p1%dd, 16033 16034 #### Human Designed Systems (Concept) 16035 # 16036 # Human Designed Systems 16037 # 400 Fehley Drive 16038 # King of Prussia, PA 19406 16039 # Vox: (610)-277-8300 16040 # Fax: (610)-275-5739 16041 # Net: support (at] hds.com 16042 # 16043 # John Martin <john (at] hds.com> is their termcap expert. They're mostly out of 16044 # the character-terminal business now (1995) and making X terminals. In 16045 # particular, the whole `Concept' line described here was discontinued long 16046 # ago. 16047 # 16048 16049 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981 16050 # Extensive changes to c108 by arpavax:eric Feb 1982 16051 # Some unknown person at SCO then translated it to terminfo. 16052 # 16053 # There seem to be a number of different versions of the C108 PROMS 16054 # (with bug fixes in its Z-80 program). 16055 # 16056 # The first one that we had would lock out the keyboard of you 16057 # sent lots of short lines (like /usr/dict/words) at 9600 baud. 16058 # Try that on your C108 and see if it sends a ^S when you type it. 16059 # If so, you have an old version of the PROMs. 16060 # 16061 # You should configure the C108 to send ^S/^Q before running this. 16062 # It is much faster (at 9600 baud) than the c100 because the delays 16063 # are not fixed. 16064 # new status line display entries for c108-8p: 16065 # <is3> - init str #3 - setup term for status display - 16066 # set programmer mode, select window 2, define window at last 16067 # line of memory, set bkgnd stat mesg there, select window 0. 16068 # 16069 # <tsl> - to status line - select window 2, home cursor, erase to 16070 # end-of-window, 1/2 bright on, goto(line#0, col#?) 16071 # 16072 # <fsl> - from status line - 1/2 bright off, select window 0 16073 # 16074 # <dsl> - disable status display - set bkgnd status mesg with 16075 # illegal window # 16076 # 16077 # There are probably more function keys that should be added but 16078 # I don't know what they are. 16079 # 16080 # No delays needed on c108 because of ^S/^Q handshaking 16081 # 16082 c108|concept108|c108-8p|concept108-8p|Concept 108 w/8 pages, 16083 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p 16084 \Ep\n, 16085 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p, 16086 c108-4p|concept108-4p|Concept 108 w/4 pages, 16087 eslok, hs, xon, 16088 pb@, 16089 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r, 16090 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95} 16091 %>%t\001%{96}%-%;%{32}%+%c, 16092 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, 16093 is1=\EK\E!\E F, 16094 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, 16095 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, 16096 smcup=\EU\Ev 8p\Ep\r\E\025, 16097 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, 16098 c108-rv|c108-rv-8p|Concept 108 w/8 pages in reverse video, 16099 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, 16100 use=c108-rv-4p, 16101 c108-rv-4p|concept108rv4p|Concept 108 w/4 pages in reverse video, 16102 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, 16103 use=c108-4p, 16104 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|Concept 108 w/8 pages in wide mode, 16105 cols#132, 16106 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, 16107 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, 16108 16109 # Concept 100: 16110 # These have only window relative cursor addressing, not screen 16111 # relative. To get it to work right here, smcup/rmcup (which 16112 # were invented for the concept) lock you into a one page 16113 # window for screen style programs. 16114 # 16115 # To get out of the one page window, we use a clever trick: 16116 # we set the window size to zero ("\Ev " in rmcup) which the 16117 # terminal recognizes as an error and resets the window to all 16118 # of memory. 16119 # 16120 # This trick works on c100 but does not on c108, sigh. 16121 # 16122 # Some tty drivers use cr3 for concept, others use nl3, hence 16123 # the delays on cr and ind below. This padding is only needed at 16124 # 9600 baud and up. One or the other is commented out depending on 16125 # local conventions. 16126 # 16127 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe 16128 # less than 6 but more than 2 will work. 16129 # 16130 # Note: can't use function keys f7-f10 because they are 16131 # indistinguishable from arrow keys (!), also, del char and 16132 # clear eol use xon/xoff so they probably won't work very well. 16133 # 16134 # Also note that we don't define insrt/del char/delline/eop/send 16135 # because they don't transmit unless we reset them - I figured 16136 # it was a bad idea to clobber their definitions. 16137 # 16138 # The <mc5> sequence changes the escape character to ^^ so that 16139 # escapes will be passed through to the printer. Only trouble 16140 # is that ^^ won't be - ^^ was chosen to be unlikely. 16141 # Unfortunately, if you're sending raster bits through to be 16142 # plotted, any character you choose will be likely, so we lose. 16143 # 16144 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff) 16145 # cannot be # in is2 because it will hang a c100 with no printer 16146 # if sent twice. 16147 c100|concept100|concept|c104|c100-4p|HDS Concept 100, 16148 OTbs, am, eo, mir, ul, xenl, 16149 cols#80, lines#24, pb#9600, vt#8, 16150 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, 16151 cub1=^H, cud1=\n, cuf1=\E=, 16152 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, 16153 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, 16154 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, 16155 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>, 16156 is1=\EK, 16157 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E 16158 \010A@\s\E4#:"\E:a\E4#;"\E:b\E4#<"\E:c, 16159 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, 16160 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, 16161 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, 16162 kf4=\E8, kf5=\E9, kf6=\E:a, kf7=\E:b, kf8=\E:c, khome=\E?, 16163 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., 16164 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, 16165 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, 16166 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, 16167 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, 16168 rmso=\Ed, rmul=\Eg, sgr0=\EN@, 16169 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, 16170 smso=\ED, smul=\EG, 16171 c100-rv|c100-rv-4p|concept100-rv|Concept 100 reverse video, 16172 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, 16173 smso=\EE, use=c100, 16174 oc100|oconcept|c100-1p|old 1-page Concept 100, 16175 in, 16176 is3@, use=c100, 16177 16178 # From: Walter Skorski <walt (at] genetics1.JMP.TJU.EDU>, 16-oct-1996. 16179 # Lots of notes, originally inline, but ncurses doesn't grok that. 16180 # 16181 # am: not available in power on mode, but turned on with \E[=107;207h in 16182 # is2=. Also, \E=124l in is2= could have been used to prevent needing 16183 # to specify xenl:, but that would have rendered the last space on the 16184 # last line useless. 16185 # bw: Not available in power on mode, but turned on with \E[=107;207h in 16186 # is2=. 16187 # clear: Could be done with \E[2J alone, except that vi (and probably most 16188 # other programs) assume that this also homes the cursor. 16189 # dsl: Go to window 2, go to the beginning of the line, use a line feed to 16190 # scroll the window, and go back to window 1. 16191 # is2: the string may cause a warning to be issued by tic that it 16192 # found a very long line and that it suspects that a comma is missing 16193 # somewhere. This warning can be ignored (unless it comes up more than 16194 # once). The initialization string contains the following commands: 16195 # 16196 # [Setup mode items changed from factory defaults:] 16197 # \E)0 set alternate character set to 16198 # graphics 16199 # ^O set character set to default 16200 # [In case it wasn't] 16201 # \E[m turn off all attributes 16202 # [In case they weren't off] 16203 # \E[=107; cursor wrap and 16204 # 207h character wrap on 16205 # \E[90;3u set Fkey definitions to "transmit" 16206 # defaults 16207 # \E[92;3u set cursor key definitions to 16208 # "transmit" defaults 16209 # \E[43;1u set shift F13 to transmit... 16210 # \177\E$P\177 16211 # \E[44;1u set shift F14 to transmit... 16212 # \177\E$Q\177 16213 # \E[45;1u set shift F15 to transmit... 16214 # \177\E$R\177 16215 # \E[46;1u set shift F16 to transmit... 16216 # \177\E$S\177 16217 # \E[200;1u set shift up to transmit... 16218 # \177\E$A\177 16219 # \E[201;1u set shift down to transmit... 16220 # \177\E$B\177 16221 # \E[202;1u set shift right to transmit... 16222 # \177\E$C\177 16223 # \E[203;1u set shift left to transmit... 16224 # \177\E$D\177 16225 # \E[204;1u set shift home to transmit... 16226 # \177\E$H\177 16227 # \E[212;1u set backtab to transmit... 16228 # \177\E$I\177 16229 # \E[213;1u set shift backspace to transmit... 16230 # \177\E$^H\177 16231 # \E[214;1u set shift del to transmit... 16232 # "\E$\177" 16233 # [Necessary items not mentioned in setup mode:] 16234 # \E[2!w move to window 2 16235 # \E[25;25w define window as line 25 of memory 16236 # \E[!w move to window 1 16237 # \E[2*w show current line of window 2 as 16238 # status line 16239 # \E[2+x set meta key to use high bit 16240 # \E[;3+} move underline to bottom of character 16241 # 16242 # All Fkeys are set to their default transmit definitions with \E[90;3u 16243 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty 16244 # setting MUST be redefined or deactivated, because the default is 16245 # contained in almost all of this terminal's Fkey strings! If for some 16246 # reason "quit" cannot be altered, the Fkeys can, but it would be 16247 # necessary to change ^| to ^] in all of these definitions, and add 16248 # \E[2;029!t to is2. 16249 # lines: is set to 24 because this terminal refuses to treat the 25th 16250 # line normally. 16251 # ll: Not available in power on mode, but turned on with \E[=107;207h in 16252 # is2=. 16253 # lm: Pointless, given that this definition locks a single screen of 16254 # memory into view, but what the hey... 16255 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any 16256 # other attributes alone), but some programs expect this to turn off 16257 # everything. 16258 # rmul: Could use \E[4!{ to turn off only underline (leaving any other 16259 # attributes alone), but some programs expect this to turn off 16260 # everything. 16261 # sgr: Attributes are set on this terminal with the string \E[ followed by 16262 # a list of attribute code numbers (in decimal, separated by 16263 # semicolons), followed by the character m. The attribute code 16264 # numbers are: 16265 # 1 for bold; 16266 # 2 for dim (which is ignored in power on mode); 16267 # 4 for underline; 16268 # 5 for blinking; 16269 # 7 for inverse; 16270 # 8 for not displayable; and 16271 # =99 for protected (except that there are strange side 16272 # effects to protected characters which make them inadvisable). 16273 # The mapping of terminfo parameters to attributes is as follows: 16274 # %p1 (standout) = bold and inverse together; 16275 # %p2 (underline) = underline; 16276 # %p3 (reverse) = inverse; 16277 # %p4 (blink) = blinking; 16278 # %p5 (dim) is ignored; 16279 # %p6 (bold) = bold; 16280 # %p7 (invisible) = not displayable; 16281 # %p8 (protected) is ignored; and 16282 # %p9 (alt char set) = alt char set. 16283 # The code to do this is: 16284 # \E[0 OUTPUT \E[0 16285 # %?%p1%p6%O IF (standout; bold) OR 16286 # %t;1 THEN OUTPUT ;1 16287 # %; ENDIF 16288 # %?%p2 IF underline 16289 # %t;4 THEN OUTPUT ;4 16290 # %; ENDIF 16291 # %?%p4 IF blink 16292 # %t;5 THEN OUTPUT ;5 16293 # %; ENDIF 16294 # %?%p1%p3%O IF (standout; reverse) OR 16295 # %t;7 THEN OUTPUT ;7 16296 # %; ENDIF 16297 # %?%p7 IF invisible 16298 # %t;8 THEN OUTPUT ;8 16299 # %; ENDIF 16300 # m OUTPUT m 16301 # %?%p9 IF altcharset 16302 # %t^N THEN OUTPUT ^N 16303 # %e^O ELSE OUTPUT ^O 16304 # %; ENDIF 16305 # sgr0: Everything is turned off (including alternate character set), since 16306 # there is no way of knowing what it is that the program wants turned 16307 # off. 16308 # smul: The "underline" attribute is reconfigurable to an overline or 16309 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true 16310 # bottom of the character cell. This was done to allow for more readable 16311 # underlined characters, and to be able to distinguish between an 16312 # underlined space, an underscore, and an underlined underscore. 16313 # xenl: Terminal can be configured to not need this, but this "glitch" 16314 # behavior is actually preferable with autowrap terminals. 16315 # 16316 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted 16317 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 16318 # string modifies the 'O' in kf43 to kf46 to a '$'. 16319 # 16320 # kcbt was originally ^I but redefined in is2=. 16321 # kHOM was \E[H originally but redefined in is2=, as were a number of 16322 # other keys. 16323 # kDC was originally \177 but redefined in is2=. 16324 # 16325 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=. 16326 # tsl: Go to window 2, then do an hpa=. 16327 # 16328 #------- flash=\E[8;3!}^G\E[3;3!} 16329 #------- flash=\E[?5h$<100>\E[?5l 16330 # There are two ways to flash the screen, both of which have their drawbacks. 16331 # The first is to set the bell mode to video, transmit a bell character, and 16332 # set the bell mode back - but to what? There is no way of knowing what the 16333 # user's old bell setting was before we messed with it. Worse, the command to 16334 # set the bell mode also sets the key click volume, and there is no way to say 16335 # "leave that alone", or to know what it's set to, either. 16336 # The second way to do a flash is to set the screen to inverse video, pad for a 16337 # tenth of a second, and set it back - but like before, there's no way to know 16338 # that the screen wasn't ALREADY in inverse video, or that the user may prefer 16339 # it that way. The point is moot anyway, since vi (and probably other 16340 # programs) assume that by defining flash=, you want the computer to use it 16341 # INSTEAD of bel=, rather than as a secondary type of signal. 16342 # 16343 #------- cvvis=\E[+{ 16344 # The is the power on setting, which is also as visible as the cursor 16345 # gets. 16346 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw 16347 # Windowing is possible, but not defined here because it is also used to 16348 # emulate status line functions. Allowing a program to set a window could 16349 # clobber the status line or render it unusable. There is additional memory, 16350 # but screen scroll functions are destructive and do not make use of it. 16351 # 16352 #------- dim= Not available in power on mode. 16353 # You have a choice of defining low intensity characters as "half bright" and 16354 # high intensity as "normal", or defining low as "normal" and high as "bold". 16355 # No matter which you choose, only one of either "half bright" or "bold" is 16356 # available at any time, so taking the time to override the default is 16357 # pointless. 16358 # 16359 #------- prot=\E[=0;99m 16360 # Not defined, because it appears to have some strange side effects. 16361 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 16362 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 16363 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; 16364 # Available, but making them available to programs is inadvisable. 16365 # The code to do this is: 16366 # %?%p1%{24}%< IF ((key; 24) <; 16367 # %p1%{30}%> ((key; 30) >; 16368 # %p1%{54}%< (key; 54) < 16369 # %A ) AND 16370 # %O ) OR 16371 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",] 16372 # %t\E[ THEN OUTPUT \E[ 16373 # %p1%d OUTPUT (key) as decimal 16374 # [next line applies to pfx only] 16375 # ;1 OUTPUT ;1 16376 # u OUTPUT u 16377 # \177 OUTPUT \177 16378 # %p2%s OUTPUT (string) as string 16379 # \177 OUTPUT \177 16380 # [DEL chosen as delimiter, but could be any character] 16381 # [implied: ELSE do nothing] 16382 # %; ENDIF 16383 # 16384 #------- rs2= 16385 # Not defined since anything it might do could be done faster and easier with 16386 # either Meta-Shift-Reset or the main power switch. 16387 # 16388 #------- smkx=\E[1!z 16389 #------- rmkx=\E[!z 16390 # These sequences apply to the cursor and setup keys only, not to the 16391 # numeric keypad. But it doesn't matter anyway, since making these 16392 # available to programs is inadvisable. 16393 # For the key definitions below, all sequences beginning with \E$ are 16394 # custom and programmed into the terminal via is2. \E$ also has no 16395 # meaning to any other terminal. 16396 # 16397 #------- cmdch=\E[;%p1%d!t 16398 # Available, but making it available to programs is inadvisable. 16399 #------- smxon=\E[1*q 16400 # Available, but making it available to programs is inadvisable. 16401 # Terminal will send XON/XOFF on buffer overflow. 16402 #------- rmxon=\E[*q 16403 # Available, but making it available to programs is inadvisable. 16404 # Terminal will not notify on buffer overflow. 16405 #------- smm=\E[2+x 16406 #------- rmm=\E[+x 16407 # Available, but making them available to programs is inadvisable. 16408 # 16409 # Printing: 16410 # It's not made clear in the manuals, but based on other ansi/vt type 16411 # terminals, it's a good guess that this terminal is capable of both 16412 # "transparent print" (which doesn't copy data to the screen, and 16413 # therefore needs mc5i: specified to say so) and "auxiliary print" 16414 # (which does duplicate printed data on the screen, in which case mc4= 16415 # and mc5= should use the \E[?4i and \E[?5i strings instead). 16416 16417 hds200|Human Designed Systems HDS200, 16418 am, bw, eslok, hs, km, mir, msgr, xenl, xon, NQ, 16419 cols#80, it#8, lines#24, lm#0, 16420 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 16421 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, 16422 clear=\E[H\E[J, cnorm=\E[+{, cr=\r, 16423 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 16424 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 16425 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16426 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 16427 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, 16428 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 16429 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 16430 invis=\E[0;8m, 16431 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P 16432 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u 16433 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177 16434 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177 16435 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[ 16436 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, 16437 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, 16438 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16439 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r, 16440 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS, 16441 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r, 16442 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r, 16443 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r, 16444 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r, 16445 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r, 16446 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q, 16447 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r, 16448 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r, 16449 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r, 16450 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U, 16451 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8, 16452 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, 16453 rmul=\E[m\017, sc=\E7, 16454 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7 16455 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 16456 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, 16457 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, 16458 vpa=\E[%i%p1%dd, use=ansi+pp, 16459 16460 # <ht> through <el> included to specify padding needed in raw mode. 16461 # (avt-ns: added empty <acsc> to suppress a tic warning --esr) 16462 avt-ns|Concept AVT no status line, 16463 OTbs, am, eo, mir, ul, xenl, xon, 16464 cols#80, it#8, lines#24, lm#192, 16465 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 16466 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r, 16467 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 16468 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 16469 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16470 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, 16471 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, 16472 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, 16473 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, 16474 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l, 16475 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1 16476 \E[1Q\EW\E[!y\E[!z\E>\E[0:0:32!r\E[0*w\E[w\E2\r\n\E[2;27 16477 !t, 16478 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16479 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 16480 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r, 16481 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 16482 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, 16483 prot=\E[99m, rc=\E8, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>, 16484 rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u, 16485 rmso=\E[7!{, rmul=\E[4!{, sc=\E7, 16486 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1; 16487 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e 16488 \016%;$<1>, 16489 sgr0=\E[m\016$<1>, smacs=\017$<1>, 16490 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h, 16491 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 16492 vpa=\E[%p1%{1}%+%dd, use=ansi+rep, 16493 avt-rv-ns|Concept AVT in reverse video mode/no status line, 16494 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 16495 use=avt-ns, 16496 avt-w-ns|Concept AVT in 132 column mode/no status line, 16497 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 16498 use=avt-ns, 16499 avt-w-rv-ns|Concept AVT in 132 column mode/no status line/reverse video, 16500 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 16501 smcup=\E[H\E[1;24;1;132w, use=avt-ns, 16502 16503 # Concept AVT with status line. We get the status line using the 16504 # "Background status line" feature of the terminal. We swipe the 16505 # first line of memory in window 2 for the status line, keeping 16506 # 191 lines of memory and 24 screen lines for regular use. 16507 # The first line is used instead of the last so that this works 16508 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this 16509 # assumes an 8 page AVT but lm isn't currently used anywhere.) 16510 # 16511 avt+s|Concept AVT status line changes, 16512 eslok, hs, 16513 lm#191, 16514 dsl=\E[0*w, fsl=\E[1;1!w, 16515 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, 16516 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, 16517 tsl=\E[2;1!w\E[;%p1%dH\E[2K, 16518 avt|avt-s|concept-avt|Concept AVT w/80 columns, 16519 use=avt+s, use=avt-ns, 16520 avt-rv|avt-rv-s|Concept AVT reverse video w/sl, 16521 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 16522 use=avt+s, use=avt-ns, 16523 avt-w|avt-w-s|Concept AVT 132 cols+status, 16524 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 16525 use=avt+s, use=avt-ns, 16526 avt-w-rv|avt-w-rv-s|Concept AVT wide+status+rv, 16527 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 16528 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, 16529 16530 #### Contel Business Systems. 16531 # 16532 16533 # Contel c300 and c320 terminals. 16534 contel300|contel320|c300|Contel Business Systems C-300 or C-320, 16535 am, in, xon, 16536 cols#80, lines#24, xmc#1, 16537 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 16538 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16539 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 16540 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 16541 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>, 16542 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 16543 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 16544 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, 16545 # Contel c301 and c321 terminals. 16546 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, 16547 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, 16548 use=contel300, 16549 16550 #### Data General (dg) 16551 # 16552 # According to James Carlson <carlson (at] xylogics.com> writing in January 1995, 16553 # the terminals group at Data General was shut down in 1991; all these 16554 # terminals have thus been discontinued. 16555 # 16556 # DG terminals have function keys that respond to the SHIFT and CTRL keys, 16557 # e.g., SHIFT-F1 generates a different code from F1. To number the keys 16558 # sequentially, first the unmodified key codes are listed as F1 through F15. 16559 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions 16560 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as 16561 # F46 through F60. This is done in the private "includes" below whose names 16562 # start with "dgkeys+". 16563 # 16564 # DG terminals generally support 8 bit characters. For each of these terminals 16565 # two descriptions are supplied: 16566 # 1) A default description for 8 bits/character communications, which 16567 # uses the default DG international character set and keyboard codes. 16568 # 2) A description with suffix "-7b" for 7 bits/character communications. 16569 # This description must use the NON-DEFAULT native keyboard language. 16570 16571 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), 16572 # Ctrl/Shift fdkeys (kf34-kf44). 16573 16574 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, 16575 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, 16576 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 16577 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, 16578 kf11=\233011z, kf12=\233012z, kf13=\233013z, 16579 kf14=\233014z, kf15=\233000z, kf16=\233101z, 16580 kf17=\233102z, kf18=\233103z, kf19=\233104z, 16581 kf2=\233002z, kf20=\233105z, kf21=\233106z, 16582 kf22=\233107z, kf23=\233108z, kf24=\233109z, 16583 kf25=\233110z, kf26=\233111z, kf27=\233112z, 16584 kf28=\233113z, kf29=\233114z, kf3=\233003z, 16585 kf30=\233100z, kf31=\233201z, kf32=\233202z, 16586 kf33=\233203z, kf34=\233204z, kf35=\233205z, 16587 kf36=\233206z, kf37=\233207z, kf38=\233208z, 16588 kf39=\233209z, kf4=\233004z, kf40=\233210z, 16589 kf41=\233211z, kf42=\233212z, kf43=\233213z, 16590 kf44=\233214z, kf45=\233200z, kf46=\233301z, 16591 kf47=\233302z, kf48=\233303z, kf49=\233304z, 16592 kf5=\233005z, kf50=\233305z, kf51=\233306z, 16593 kf52=\233307z, kf53=\233308z, kf54=\233309z, 16594 kf55=\233310z, kf56=\233311z, kf57=\233312z, 16595 kf58=\233313z, kf59=\233314z, kf6=\233006z, 16596 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, 16597 khome=\233H, kprt=\233i, 16598 16599 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, 16600 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, 16601 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16602 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, 16603 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, 16604 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, 16605 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, 16606 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, 16607 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, 16608 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, 16609 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, 16610 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, 16611 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, 16612 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, 16613 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, 16614 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, 16615 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, 16616 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, 16617 kf9=\E[009z, khome=\E[H, kprt=\E[i, 16618 16619 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, 16620 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, 16621 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, 16622 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, 16623 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, 16624 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, 16625 kf31=^^9, kf32=^^:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, 16626 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, 16627 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, 16628 kf8=^^x, kf9=^^y, khome=^H, 16629 16630 dgkeys+15|Private entry describing 15 DG mode special keys, 16631 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, 16632 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, 16633 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, 16634 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, 16635 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, 16636 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, 16637 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^:, 16638 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, 16639 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&, 16640 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, 16641 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, 16642 kf9=^^y, 16643 16644 # Data General color terminals use the "Tektronix" color model. The total 16645 # number of colors varies with the terminal model, as does support for 16646 # attributes used in conjunction with color. 16647 16648 # Removed u7, u8 definitions since they conflict with tack: 16649 # Preserve user-defined colors in at least some cases. 16650 # u7=^^Fh, 16651 # Default is ACM mode. 16652 # u8=^^F}20^^Fi^^F}21, 16653 # 16654 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, 16655 bce, 16656 colors#16, ncv#53, pairs#0x100, 16657 op=\036Ad\036Bd, 16658 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1 16659 %{4}%&%t%{1}%|%;%;%{48}%+%c, 16660 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1 16661 %{4}%&%t%{1}%|%;%;%{48}%+%c, 16662 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 16663 16664 dg+fixed|Fixed color info for DG D430C terminals in DG mode, 16665 use=dgunix+fixed, 16666 16667 # Video attributes are coordinated using static variables set by "sgr", then 16668 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. 16669 # (D=dim, U=underline, B=blink, R=reverse.) 16670 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, 16671 bce, 16672 colors#8, ncv#16, pairs#64, 16673 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, 16674 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 16675 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 16676 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%; 16677 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 16678 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%; 16679 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 16680 16681 dg+color|Color info for Data General D470C terminals in ANSI mode, 16682 colors#16, ncv#53, pairs#0x100, 16683 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%; 16684 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t 16685 ;5%;%?%gR%t;7%;m, 16686 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%; 16687 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t 16688 ;5%;%?%gR%t;7%;m, 16689 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%? 16690 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%; 16691 %?%gR%t;7%;m, 16692 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%? 16693 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%; 16694 %?%gR%t;7%;m, 16695 use=dg+color8, 16696 16697 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, 16698 bce, 16699 colors#8, ncv#16, pairs#64, 16700 op=\036Ad\036Bd, 16701 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%| 16702 %;%{48}%+%c, 16703 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%| 16704 %;%{48}%+%c, 16705 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 16706 16707 dgmode+color|Color info for Data General D470C terminals in DG mode, 16708 colors#16, pairs#0x100, 16709 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1 16710 %{4}%&%t%{1}%|%;%;%{48}%+%c, 16711 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1 16712 %{4}%&%t%{1}%|%;%;%{48}%+%c, 16713 use=dgmode+color8, 16714 16715 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, 16716 bce, ccc, 16717 colors#52, ncv#53, pairs#26, 16718 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%* 16719 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%* 16720 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%* 16721 %{1000}%/%02X, 16722 oc=\036RG01A00FF00000000\036RG01B00000000FF00 16723 \036RG01C007F00000000\036RG01D000000007F00, 16724 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, 16725 scp=\036RG2%p1%02X, 16726 16727 # Colors are in the order: normal, reverse, dim, dim + reverse. 16728 dg+ccc|Configurable color info for DG D430C terminals in DG mode, 16729 bce, ccc, 16730 colors#52, ncv#53, pairs#26, 16731 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255} 16732 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c 16733 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m 16734 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga 16735 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48} 16736 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16} 16737 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa 16738 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, 16739 oc=\036RG01:00??00000000\036RG01;00000000??00\036RG01<007?00 16740 000000\036RG01=000000007?00, 16741 op=\036RF4831:\036RF2>31;\036RF1=31<\036RF3?31=, 16742 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, 16743 16744 # The generic DG terminal type (an 8-bit-clean subset of the 6053) 16745 # Initialization string 1 sets: 16746 # ^R - vertical scrolling enabled 16747 # ^C - blinking enabled 16748 dg-generic|generic Data General terminal in DG mode, 16749 am, bw, msgr, xon, 16750 cols#80, lines#24, 16751 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X, 16752 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C, 16753 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, 16754 smul=^T, use=dgkeys+11, 16755 16756 # According to the 4.4BSD termcap file, the dg200 <cup> should be the 16757 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap 16758 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, 16759 # maybe they were originally nuls (which would fit). 16760 16761 dg200|Data General DASHER 200, 16762 OTbs, am, bw, 16763 cols#80, lines#24, 16764 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X, 16765 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n, 16766 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, 16767 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, 16768 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U, 16769 smso=^^D, smul=^T, 16770 16771 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL 16772 dg210|dg-ansi|Data General 210/211, 16773 am, 16774 cols#80, lines#24, 16775 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 16776 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 16777 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16778 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, 16779 smso=\E[7;m, smul=\E[4;m, 16780 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan> 16781 # courtesy of Carlos Rucalde of Vantage Software, Inc. 16782 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover. 16783 # I suspect the d200 function keys actually work on the dg211, check it out.) 16784 dg211|Data General d211, 16785 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, 16786 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L, 16787 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, 16788 16789 # dg450 from Cornell (not official) 16790 dg450|dg6134|Data General 6134, 16791 cub1@, cuf1=^X, use=dg200, 16792 16793 # Not official... 16794 # Note: lesser Dasher terminals will not work with vi because vi insists upon 16795 # having a command to move straight down from any position on the bottom line 16796 # and scroll the screen up, or a direct vertical scroll command. The 460 and 16797 # above have both, the D210/211, for instance, has neither. We must use ANSI 16798 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is 16799 # backspace on all terminals. This is not so in DG mode. 16800 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the 16801 # grounds that there is no matching ":ml:" 16802 dg460-ansi|Data General Dasher 460 in ANSI-mode, 16803 OTbs, am, msgr, ul, 16804 cols#80, it#8, lines#24, 16805 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, 16806 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, 16807 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 16808 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, 16809 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16810 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, 16811 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, 16812 kf8=\E[009z, kf9=\E[00:z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3, 16813 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, mc0=\E[i, 16814 rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05, 16815 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%; 16816 %?%p1%p3%|%t;7%;m, 16817 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u8=\E[5n, u9=\E[0n, 16818 use=ansi+cpr, 16819 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official) 16820 # Data General 605x 16821 # Ought to work for a Model 6242, Type D210 as well as a 605x. 16822 # Note that the cursor-down key transmits ^Z. Job control users, beware! 16823 # This also matches a posted description of something called a `Dasher 100' 16824 # so there's a dg100 alias here. 16825 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr) 16826 dg6053-old|dg100|Data General 6053, 16827 OTbs, am, bw, ul, 16828 cols#80, lines#24, 16829 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z, 16830 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, 16831 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, 16832 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, 16833 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, 16834 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, 16835 smul=^T, 16836 16837 # (Some performance can be gained over the generic DG terminal type) 16838 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, 16839 xon@, 16840 home=\020\0\0, ll=^P\0^W, use=dg-generic, 16841 16842 # Like 6053, but adds reverse video and more keypad and function keys. 16843 d200|d200-dg|Data General DASHER D200, 16844 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], 16845 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4 16846 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, 16847 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053, 16848 16849 # DASHER D210 series terminals in ANSI mode. 16850 # Reverse video, no insert/delete character/line, 7 bits/character only. 16851 # 16852 # Initialization string 1 sets: 16853 # <0 - scrolling enabled 16854 # <1 - blink enabled 16855 # <4 - print characters regardless of attributes 16856 d210|d214|Data General DASHER D210 series, 16857 am, bw, msgr, xon, 16858 cols#80, lines#24, 16859 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r, 16860 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 16861 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16862 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, 16863 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l, 16864 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, 16865 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%| 16866 %p6%|%t7;%;m, 16867 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b, 16868 16869 # DASHER D210 series terminals in DG mode. 16870 # Like D200, but adds clear to end-of-screen and needs XON/XOFF. 16871 d210-dg|d214-dg|Data General DASHER D210 series in DG mode, 16872 xon, 16873 ed=^^FF, use=d200-dg, 16874 16875 # DASHER D211 series terminals in ANSI mode. 16876 # Like the D210, but with 8-bit characters and local printer support. 16877 # 16878 # Initialization string 2 sets: 16879 # \E[2;1;1;1v 16880 # 2;1 - 8 bit operations 16881 # 1;1 - 8 bit (international) keyboard language 16882 # \E(B - default primary character set (U.S. ASCII) 16883 # \E)4 - default secondary character set (international) 16884 # ^O - primary character set 16885 # 16886 d211|d215|Data General DASHER D211 series, 16887 km, 16888 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, 16889 use=d210, 16890 16891 # Initialization string 2 sets: 16892 # \E[2;0;1;0v 16893 # 2;0 - 7 bit operations 16894 # 1;0 - 7 bit (native) keyboard language 16895 # \E(0 - default character set (the keyboard native language) 16896 # ^O - primary character set 16897 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, 16898 km@, 16899 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, 16900 16901 # Like the D210 series, but adds support for 8-bit characters. 16902 # 16903 # Reset string 2 sets: 16904 # ^^N - secondary character set 16905 # ^^FS0> - 8 bit international character set 16906 # ^^O - primary character set 16907 # ^^FS00 - default character set (matching the native keyboard language) 16908 # 16909 d211-dg|d215-dg|Data General DASHER D211 series in DG mode, 16910 km, 16911 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, 16912 16913 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, 16914 use=d211-dg, 16915 16916 # Enhanced DG mode with changes to be more UNIX compatible. 16917 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, 16918 mc5i, 16919 it#8, 16920 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, 16921 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, 16922 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n, 16923 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1, 16924 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC, 16925 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9, 16926 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, 16927 rs2=\036N\036FS0E\036O\036FS00, 16928 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%; 16929 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1 16930 1%e00%;, 16931 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, 16932 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg, 16933 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, 16934 lines#25, 16935 is3=^^Fz2, use=d216+, 16936 16937 d217-unix|Data General DASHER D217 in DG-UNIX mode, 16938 use=d216-unix, 16939 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, 16940 use=d216-unix-25, 16941 16942 # DASHER D220 color terminal in ANSI mode. 16943 # Like the D470C but with fewer colors and screen editing features. 16944 # 16945 # Initialization string 1 sets: 16946 # \E[<0;<1;<4l 16947 # <0 - scrolling enabled 16948 # <1 - blink enabled 16949 # <4 - print characters regardless of attributes 16950 # \E[m - all attributes off 16951 # Reset string 1 sets: 16952 # \Ec - initial mode defaults (RIS) 16953 # 16954 d220|Data General DASHER D220, 16955 mc5i@, 16956 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 16957 use=dg+color8, use=d470c, 16958 16959 d220-7b|Data General DASHER D220 in 7 bit mode, 16960 mc5i@, 16961 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 16962 use=dg+color8, use=d470c-7b, 16963 16964 # Initialization string 3 sets: 16965 # - default cursor (solid rectangle) 16966 # Reset string 2 sets: 16967 # ^^N - secondary character set 16968 # ^^FS0> - 8 bit international character set 16969 # ^^O - primary character set 16970 # ^^FS00 - default character set (matching the native keyboard language) 16971 # 16972 d220-dg|Data General DASHER D220 color terminal in DG mode, 16973 mc5i@, 16974 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@, 16975 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8, 16976 use=d470c-dg, 16977 16978 # DASHER D230C color terminal in ANSI mode. 16979 # Like the D220 but with minor ANSI compatibility improvements. 16980 # 16981 d230c|d230|Data General DASHER D230C, 16982 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n, 16983 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, 16984 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0} 16985 %;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e 16986 %{0}%;%PD50m\E)%?%p9%t6\016%e4\017%;, 16987 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, 16988 smul=\E[4;50m, use=dgkeys+7b, use=d220, 16989 16990 d230c-dg|d230-dg|Data General DASHER D230C in DG mode, 16991 use=d220-dg, 16992 16993 # DASHER D400/D450 series terminals. 16994 # These add intelligent features like insert/delete to the D200 series. 16995 # 16996 # Initialization string 2 sets: 16997 # ^^FQ2 - default cursor (solid rectangle) 16998 # ^^FW - character protection disabled 16999 # ^^FJ - normal (80 column) mode 17000 # ^^F\^ - horizontal scrolling enabled (for alignment) 17001 # ^^FX004? - margins at columns 0 and 79 17002 # ^^F] - horizontal scrolling disabled 17003 # ^^O - primary character set 17004 # ^^FS00 - default character set (the keyboard native language) 17005 # - (should reset scrolling regions, but that glitches the screen) 17006 # Reset string 1 sets: 17007 # ^^FA - all terminal defaults except scroll rate 17008 # Reset string 2 sets: 17009 # ^^F] - horizontal scrolling disabled 17010 # ^^FT0 - jump scrolling 17011 # 17012 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, 17013 mc5i, 17014 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2, 17015 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG, 17016 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH, 17017 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O 17018 \036FS00, 17019 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA, 17020 rs2=\036F]\036FT0, 17021 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4 17022 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, 17023 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c, 17024 use=d210-dg, 17025 17026 # DASHER D410/D460 series terminals in ANSI mode. 17027 # These add a large number of intelligent terminal features. 17028 # 17029 # Initialization string 1 sets: 17030 # \E[<0;<1;<2;<4l 17031 # <0 - scrolling enabled 17032 # <1 - blink enabled 17033 # <2 - horizontal scrolling enabled (for alignment) 17034 # <4 - print characters regardless of attributes 17035 # \E[5;0v - normal (80 column) mode 17036 # \E[1;1;80w - margins at columns 1 and 80 17037 # \E[1;6;<2h 17038 # 1 - print all characters even if protected 17039 # 6 - character protection disabled 17040 # <2 - horizontal scrolling disabled 17041 # - (should reset scrolling regions, but that glitches the screen) 17042 # 17043 # Initialization string 2 sets: 17044 # \E[3;2;2;1;1;1v 17045 # 3;2 - default cursor (solid rectangle) 17046 # 2;1 - 8 bit operations 17047 # 1;1 - international keyboard language 17048 # \E(B - default primary character set (U.S. ASCII) 17049 # \E)4 - default secondary character set (international) 17050 # ^O - primary character set 17051 # 17052 # Reset string 1 sets: 17053 # \Ec - initial mode defaults (RIS) 17054 # \E[<2h - horizontal scrolling disabled 17055 # 17056 # Reset string 2 sets: 17057 # \E[4;0;2;1;1;1v 17058 # 4;0 - jump scrolling 17059 # 2;1 - 8 bit operations 17060 # 1;1 - 8 bit (international) keyboard language 17061 # \E(B - default primary character set (U.S. ASCII) 17062 # \E)4 - default secondary character set (international) 17063 # 17064 d410|d411|d460|d461|Data General DASHER D410/D460 series, 17065 mc5i, 17066 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, 17067 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 17068 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 17069 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, 17070 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, 17071 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, 17072 rs2=\E[4;0;2;1;1;1v\E(B\E)4, 17073 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5 17074 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;, 17075 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211, 17076 17077 # Initialization string 2 sets: 17078 # \E[3;2;2;0;1;0v 17079 # 3;2 - default cursor (solid rectangle) 17080 # 2;0 - 7 bit operations 17081 # 1;0 - 7 bit (native) keyboard language 17082 # \E(0 - default character set (the keyboard native language) 17083 # ^O - primary character set 17084 # 17085 # Reset string 2 sets: 17086 # \E[4;0;2;0;1;0v 17087 # 4;0 - jump scrolling 17088 # 2;0 - 7 bit operations 17089 # 1;0 - 7 bit (native) keyboard language 17090 # \E(0 - default character set (the keyboard native language) 17091 # 17092 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, 17093 km@, 17094 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, 17095 rs2=\E[4;0;2;0;1;0v\E(0, 17096 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%; 17097 %?%p4%t5;%;m%?%p9%t\016%e\017%;, 17098 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410, 17099 17100 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, 17101 km, 17102 enacs@, rmacs=\036FS00, 17103 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4 17104 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0 17105 0%;, 17106 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, 17107 use=d400-dg, 17108 17109 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. 17110 # 17111 # Initialization string 1 sets: 17112 # \E[<0;<1;<2;<4l 17113 # <0 - scrolling enabled 17114 # <1 - blink enabled 17115 # <2 - horizontal scrolling enabled (for alignment) 17116 # <4 - print characters regardless of attributes 17117 # \E[5;1v - compressed (135 column) mode 17118 # \E[1;1;126 - margins at columns 1 and 126 17119 # \E[1;6;<2h 17120 # 1 - print all characters even if protected 17121 # 6 - character protection disabled 17122 # <2 - horizontal scrolling disabled 17123 # - (should reset scrolling regions, but that glitches the screen) 17124 # 17125 # Reset string 1 sets: 17126 # \Ec - initial mode defaults (RIS) 17127 # \E[5;1v - compressed (135 column) mode 17128 # \E[1;1;126w - margins at columns 1 and 126 17129 # \E[<2h - horizontal scrolling disabled 17130 # 17131 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, 17132 cols#126, 17133 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 17134 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410, 17135 17136 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, 17137 cols#126, 17138 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 17139 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b, 17140 17141 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, 17142 use=d410-dg, 17143 17144 # These add intelligent features like scrolling regions. 17145 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, 17146 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5, 17147 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, 17148 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, 17149 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O 17150 \036FS00, 17151 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, 17152 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10, 17153 vpa=\036FPFF%p1%2.2X, 17154 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2 17155 %>%t000%;\036FX%p3%2.2X%p4%2.2X, 17156 use=d216+, 17157 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, 17158 cols#132, 17159 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O 17160 \036FS00, 17161 rs2=\036P@1\036FK\036FX0083, 17162 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2 17163 %>%t001%;\036FX%p3%2.2X%p4%2.2X, 17164 use=d412-unix, 17165 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, 17166 lines#25, 17167 is3=^^Fz2, 17168 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2 17169 %>%t000%;\036FX%p3%2.2X%p4%2.2X, 17170 use=d462+, 17171 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, 17172 eslok, hs, 17173 clear=\036FG\036PH, fsl=\036F}01\022, 17174 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, 17175 tsl=\036F}00\036FP%p1%2.2X18\036PG, 17176 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2 17177 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, 17178 use=d462+, 17179 17180 # Relative cursor motions are confined to the current window, 17181 # which is not what the scrolling region specification expects. 17182 # Thus, relative vertical cursor positioning must be deleted. 17183 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, 17184 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%> 17185 %t000%;, 17186 cud1@, cuu1@, ll@, use=d462+, 17187 17188 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, 17189 use=d412-unix, 17190 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, 17191 use=d412-unix-w, 17192 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, 17193 use=d412-unix-25, 17194 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, 17195 use=d412-unix-s, 17196 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, 17197 use=d412-unix-sr, 17198 17199 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, 17200 use=d413-unix, 17201 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, 17202 use=d413-unix-w, 17203 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, 17204 use=d413-unix-25, 17205 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, 17206 use=d413-unix-s, 17207 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, 17208 use=d413-unix-sr, 17209 17210 d430c-dg|d430-dg|Data General D430C in DG mode, 17211 use=d413-dg, use=dg+fixed, 17212 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, 17213 use=d413-dg, use=dg+ccc, 17214 17215 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, 17216 use=d413-unix, use=dgunix+fixed, 17217 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, 17218 use=d413-unix-w, use=dgunix+fixed, 17219 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, 17220 use=d413-unix-25, use=dgunix+fixed, 17221 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, 17222 use=d413-unix-s, use=dgunix+fixed, 17223 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, 17224 use=d413-unix-sr, use=dgunix+fixed, 17225 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, 17226 use=d413-unix, use=dgunix+ccc, 17227 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, 17228 use=d413-unix-w, use=dgunix+ccc, 17229 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, 17230 use=d413-unix-25, use=dgunix+ccc, 17231 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, 17232 use=d413-unix-s, use=dgunix+ccc, 17233 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, 17234 use=d413-unix-sr, use=dgunix+ccc, 17235 17236 # DASHER D470C color terminal in ANSI mode. 17237 # Like the D460 but with 16 colors and without a compressed mode. 17238 # 17239 # Initialization string 1 sets: 17240 # \E[<0;<1;<2;<4l 17241 # <0 - scrolling enabled 17242 # <1 - blink enabled 17243 # <2 - horizontal scrolling enabled (for alignment) 17244 # <4 - print characters regardless of attributes 17245 # \E[1;1;80w - margins at columns 1 and 80 17246 # \E[1;6;<2h 17247 # 1 - print all characters even if protected 17248 # 6 - character protection disabled 17249 # <2 - horizontal scrolling disabled 17250 # - (should reset scrolling regions, but that glitches the screen) 17251 # 17252 d470c|d470|Data General DASHER D470C, 17253 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 17254 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t 17255 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;, 17256 use=dg+color, use=d460, 17257 17258 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, 17259 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 17260 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t 17261 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;, 17262 use=dg+color, use=d460-7b, 17263 17264 # Initialization string 2 sets: 17265 # ^^FQ2 - default cursor (solid rectangle) 17266 # ^^FW - character protection disabled 17267 # ^^F\^ - horizontal scrolling enabled (for alignment) 17268 # ^^FX004? - margins at columns 0 and 79 17269 # ^^F] - horizontal scrolling disabled 17270 # ^^O - primary character set 17271 # ^^FS00 - default character set (the keyboard native language) 17272 # - (should reset scrolling regions, but that glitches the screen) 17273 # 17274 d470c-dg|d470-dg|Data General DASHER D470C in DG mode, 17275 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O 17276 \036FS00, 17277 use=dgmode+color, use=d460-dg, 17278 17279 # DASHER D555 terminal in ANSI mode. 17280 # Like a D411, but has an integrated phone. 17281 d555|Data General DASHER D555, 17282 use=d411, 17283 d555-7b|Data General DASHER D555 in 7-bit mode, 17284 use=d411-7b, 17285 d555-w|Data General DASHER D555 in wide mode, 17286 use=d411-w, 17287 d555-7b-w|Data General DASHER D555 in wide 7-bit mode, 17288 use=d411-7b-w, 17289 d555-dg|Data General DASHER D555 series in DG mode, 17290 use=d411-dg, 17291 17292 # DASHER D577 terminal in ANSI mode. 17293 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes). 17294 d577|Data General DASHER D577, 17295 use=d411, 17296 d577-7b|Data General DASHER D577 in 7-bit mode, 17297 use=d411-7b, 17298 d577-w|Data General DASHER D577 in wide mode, 17299 use=d411-w, 17300 d577-7b-w|Data General DASHER D577 in wide 7-bit mode, 17301 use=d411-7b-w, 17302 17303 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, 17304 use=d411-dg, 17305 17306 # DASHER D578 terminal. 17307 # Like a D577, but without compressed mode; like a D470C in this respect. 17308 # 17309 # Initialization string 1 sets: 17310 # \E[<0;<1;<2;<4l 17311 # <0 - scrolling enabled 17312 # <1 - blink enabled 17313 # <2 - horizontal scrolling enabled (for alignment) 17314 # <4 - print characters regardless of attributes 17315 # \E[1;1;80w - margins at columns 1 and 80 17316 # \E[1;6;<2h 17317 # 1 - print all characters even if protected 17318 # 6 - character protection disabled 17319 # <2 - horizontal scrolling disabled 17320 # - (should reset scrolling regions, but that glitches the screen) 17321 # 17322 d578|Data General DASHER D578, 17323 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, 17324 d578-7b|Data General DASHER D578 in 7-bit mode, 17325 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b, 17326 17327 #### Datamedia (dm) 17328 # 17329 # Datamedia was headquartered in Nashua, New Hampshire until it went 17330 # out of business in 1993, but the ID plates on the terminals referred 17331 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board 17332 # manufacturer which threw out all information about the terminals. 17333 # 17334 17335 cs10|colorscan|Datamedia Color Scan 10, 17336 msgr, 17337 cols#80, lines#24, 17338 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 17339 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, 17340 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 17341 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, 17342 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 17343 cs10-w|Datamedia Color Scan 10 with 132 columns, 17344 cols#132, 17345 cup=\E[%i%p1%02d;%p2%03dH, use=cs10, 17346 17347 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) 17348 dm1520|dm1521|Datamedia 1520, 17349 OTbs, am, xenl, 17350 cols#80, it#8, lines#24, 17351 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\, 17352 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17353 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_, 17354 khome=^Y, 17355 # dm2500: this terminal has both <ich> and <smir>. Applications using 17356 # termcap/terminfo directly (rather than through ncurses) might be confused. 17357 dm2500|datamedia2500|Datamedia 2500, 17358 OTbs, OTnc, 17359 cols#80, lines#24, 17360 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\, 17361 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, 17362 dch1=\020\010\030\035$<10*>, 17363 dl1=\020\032\030\035$<10*>, el=^W, home=^B, 17364 ich1=\020\034\030\035$<10*>, 17365 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377, 17366 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], 17367 smdc=^P, smir=^P, smso=^N, 17368 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) 17369 # also, has a meta-key. 17370 # From: <goldberger (at] su-csli.arpa> 17371 # (dmchat: ":MT:" changed to ":km:" -- esr) 17372 dmchat|dmchat version of Datamedia 2500, 17373 km, 17374 dl1=\020\032\030\035$<2/>, 17375 il1=\020\n\030\035\030\035$<1*/>, use=dm2500, 17376 # (dm3025: ":MT:" changed to ":km:" -- esr) 17377 dm3025|Datamedia 3025a, 17378 OTbs, km, 17379 cols#80, it#8, lines#24, 17380 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 17381 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 17382 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, 17383 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>, 17384 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, 17385 smir=\EP, smso=\EO1, 17386 dm3045|Datamedia 3045a, 17387 am, eo, km@, ul, xenl, 17388 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, 17389 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, 17390 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, 17391 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@, 17392 use=dm3025, 17393 # Datamedia DT80 soft switches: 17394 # 1 0=Jump 1=Smooth 17395 # Autorepeat 0=off 1=on 17396 # Screen 0=Dark 1=light 17397 # Cursor 0=u/l 1=block 17398 # 17399 # 2 Margin Bell 0=off 1=on 17400 # Keyclick 0=off 1=on 17401 # ANSI/VT52 0=VT52 1=ANSI 17402 # Xon/Xoff 0=Off 1=On 17403 # 17404 # 3 Shift3 0=Hash 1=UK Pound 17405 # Wrap 0=Off 1=On 17406 # Newline 0=Off 1=On 17407 # Interlace 0=Off 1=On 17408 # 17409 # 4 Parity 0=Odd 1=Even 17410 # Parity 0=Off 1=On 17411 # Bits/Char 0=7 1=8 17412 # Power 0=60Hz 1=50Hz 17413 # 17414 # 5 Line Interface 0=EIA 1=Loop 17415 # Aux Interface 0=EIA 1=Loop 17416 # Local Copy 0=Off 1=On 17417 # Spare 17418 # 17419 # 6 Aux Parity 0=Odd 1=Even 17420 # Aux Parity 0=Off 1=On 17421 # Aux Bits/Char 0=7 1=8 17422 # CRT Saver 0=Off 1=On 17423 # dm80/1 is a VT100 lookalike, but it doesn't seem to need any padding. 17424 dm80|dmdt80|dt80|Datamedia dt80/1, 17425 clear=\E[2J\E[H, cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, 17426 cuu1=\E[A, ed=\E[J, el=\E[K, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 17427 ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, 17428 smso=\E[7m, smul=\E[4m, use=vt100+4bsd, 17429 # except in 132 column mode, where it needs a little padding. 17430 # This is still less padding than the VT100, and you can always turn on 17431 # the ^S/^Q handshaking, so you can use VT100 flavors for things like 17432 # reverse video. 17433 dm80w|dmdt80w|dt80w|Datamedia dt80/1 in 132 char mode, 17434 cols#132, 17435 clear=\E[H\E[2J$<50/>, cud1=\n, 17436 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, 17437 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, 17438 # From: Adam Thompson <athompso (at] pangea.ca> Sept 10 1995 17439 dt80-sas|Datamedia DT803/DTX for SAS usage, 17440 am, bw, 17441 cols#80, lines#24, 17442 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 17443 bel=^G, clear=^L, cr=\r, 17444 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, 17445 cub1=^H, cud1=\EB, cuf1=^\, 17446 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, 17447 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, 17448 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n, 17449 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, 17450 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, 17451 smso=\E$2\004, tbc=\E'0, 17452 17453 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL 17454 # These aren't end-all Excel termcaps; but do insert/delete char/line 17455 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) 17456 # The naming convention has been bent somewhat, with the use of E? (where 17457 # E is for 'Excel') as # a name. This was done to distinguish the entries 17458 # from the other Datamedias in use here, and yet to associate a model of 17459 # the Excel terminals with the regular datamedia terminals that share 17460 # major characteristics. 17461 excel62|excel64|Datamedia Excel 62, 17462 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv, 17463 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 17464 use=dt80, 17465 excel62-w|excel64-w|Datamedia Excel 62 in 132 char mode, 17466 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv, 17467 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 17468 use=dt80w, 17469 excel62-rv|excel64-rv|Datamedia Excel 62 in reverse video mode, 17470 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n, 17471 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, 17472 smir=\E[4h, use=dt80, 17473 17474 #### Falco 17475 # 17476 # Falco Data Products 17477 # 440 Potrero Avenue 17478 # Sunnyvale, CA 940864-196 17479 # Vox: (800)-325-2648 17480 # Fax: (408)-745-7860 17481 # Net: techsup (at] charm.sys.falco.com 17482 # 17483 # Current Falco models as of 1995 are generally ANSI-compatible and support 17484 # emulations of DEC VT-series, Wyse, and TeleVideo types. 17485 # 17486 17487 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info 17488 # This terminal was released around 1983 and was discontinued long ago. 17489 # The standout and underline highlights are the same. 17490 falco|ts1|ts-1|Falco ts-1, 17491 OTbs, am, 17492 cols#80, it#8, lines#24, 17493 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 17494 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 17495 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, 17496 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, 17497 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, 17498 smir=\Eq, smso=\Eg1, smul=\Eg1, 17499 falco-p|ts1p|ts-1p|Falco ts-1 with paging option, 17500 OTbs, am, da, db, mir, msgr, ul, 17501 cols#80, it#8, lines#24, 17502 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B, 17503 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, 17504 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, 17505 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, 17506 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, 17507 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, 17508 smso=\Eg4, smul=\Eg1, 17509 # (ts100: I added <rmam>/<smam> based on the init string -- esr) 17510 ts100|ts100-sp|Falco ts100-sp, 17511 am, mir, msgr, xenl, xon, 17512 cols#80, it#8, lines#24, vt#3, 17513 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17514 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 17515 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 17516 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 17517 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 17518 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 17519 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, 17520 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, 17521 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea, 17522 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 17523 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 17524 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 17525 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 17526 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 17527 %;m%?%p9%t\016%e\017%;$<2>, 17528 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 17529 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 17530 use=decid+cpr, use=vt100+fnkeys, 17531 ts100-ctxt|Falco ts-100 saving context, 17532 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, 17533 17534 #### Florida Computer Graphics 17535 # 17536 17537 # Florida Computer Graphics Beacon System, using terminal emulator program 17538 # "host.com", as provided by FCG. This description is for an early release 17539 # of the "host" program. Known bug: <ed> clears the whole screen, so it's 17540 # commented out. 17541 17542 # From: David Bryant <cbosg!djb> 1/7/83 17543 beacon|FCG Beacon System, 17544 am, da, db, 17545 cols#80, lines#32, 17546 bel=\ESTART\r\E37\r\EEND\r$<1>, 17547 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r, 17548 cub1=^H, cud1=\n, cuf1=\EV, 17549 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, 17550 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, 17551 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, 17552 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, 17553 rmul=\ESTART\r\E60\,0\r\EEND\r, 17554 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, 17555 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, 17556 smso=\ESTART\r\E70\,6\r\EEND\r$<20>, 17557 smul=\ESTART\r\E60\,1\r\EEND\r, 17558 17559 #### Fluke 17560 # 17561 17562 # The f1720a differences from ANSI: no auto margin, destructive 17563 # tabs, # of lines, funny highlighting and underlining 17564 f1720|f1720a|fluke 1720A, 17565 xt, 17566 cols#80, lines#16, xmc#1, 17567 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B, 17568 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, 17569 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], 17570 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 17571 smso=\E[7m, smul=\E[4m, 17572 17573 #### Liberty Electronics (Freedom) 17574 # 17575 # Liberty Electronics 17576 # 48089 Fremont Blvd 17577 # Fremont CA 94538 17578 # Vox: (510)-623-6000 17579 # Fax: (510)-623-7021 17580 17581 # From: <faletti (at] berkeley.edu> 17582 # (f100: added empty <acsc> to suppress a tic warning; 17583 # made this relative to adm+sgr -- note that <invis> isn't 17584 # known to work for f100 but does on the f110. --esr) 17585 f100|freedom|freedom100|Liberty Freedom model 100, 17586 OTbs, am, bw, hs, mir, msgr, xon, 17587 cols#80, lines#24, 17588 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, 17589 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 17590 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 17591 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c, 17592 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>, 17593 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, 17594 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, 17595 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 17596 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, 17597 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 17598 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 17599 f100-rv|freedom-rv|Liberty Freedom 100 in reverse video, 17600 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, 17601 # The f110 and f200 have problems with vi(1). They use the ^V 17602 # code for the down cursor key. When kcud1 is defined in terminfo 17603 # as ^V, the Control Character Quoting capability (^V in insert mode) 17604 # is lost! It cannot be remapped in vi because it is necessary to enter 17605 # a ^V to to quote the ^V that is being remapped!!! 17606 # 17607 # f110/f200 users will have to decide whether 17608 # to lose the down cursor key or the quoting capability. We will opt 17609 # initially for leaving the quoting capability out, since use of VI 17610 # is not generally applicable to most interactive applications 17611 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr) 17612 f110|freedom110|Liberty Freedom 110, 17613 bw@, eslok, 17614 it#8, wsl#80, 17615 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, 17616 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE, 17617 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, 17618 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 17619 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, 17620 smso=\EG<, tsl=\Ef, use=f100, 17621 f110-14|Liberty Freedom 110 14inch, 17622 dch1@, use=f110, 17623 f110-w|Liberty Freedom 110 - 132 cols, 17624 cols#132, use=f110, 17625 f110-14w|Liberty Freedom 110 14in/132 cols, 17626 cols#132, 17627 dch1@, use=f110, 17628 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 17629 f200|freedom200|Liberty Freedom 200, 17630 OTbs, am, eslok, hs, mir, msgr, xon, 17631 cols#80, it#8, lines#24, wsl#80, 17632 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, 17633 clear=^Z, cnorm=\E.1, cr=\r, 17634 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, 17635 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 17636 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, 17637 flash=\Eo$<200/>\En, fsl=\r, home=^^, 17638 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H, 17639 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 17640 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 17641 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 17642 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 17643 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, 17644 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, 17645 f200-w|Liberty Freedom 200 - 132 cols, 17646 cols#132, use=f200, 17647 # The f200 has the ability to reprogram the down cursor key. The key is 17648 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, 17649 # so powering the terminal off and on will not cause the change to be lost. 17650 f200vi|Liberty Freedom 200 for vi, 17651 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200, 17652 f200vi-w|Liberty Freedom 200 - 132 cols for vi, 17653 cols#132, use=f200vi, 17654 17655 #### GraphOn (go) 17656 # 17657 # Graphon Corporation 17658 # 544 Division Street 17659 # Campbell, CA 95008 17660 # Vox: (408)-370-4080 17661 # Fax: (408)-370-5047 17662 # Net: troy (at] graphon.com (Troy Morrison) 17663 # 17664 # 17665 # The go140 and go225 have been discontinued. GraphOn now makes X terminals, 17666 # including one odd hybrid that starts out life on power-up as a character 17667 # terminal, than can be switched to X graphics mode (driven over the serial 17668 # line) by an escape sequence. No info on this beast yet. 17669 # (go140: I added <rmam>/<smam> based on the init string -- esr) 17670 go140|graphon go-140, 17671 OTbs, 17672 cols#80, it#8, lines#24, 17673 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C, 17674 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 17675 ed=\E[J$<10/>, el=\E[K, ht=^I, 17676 if=/usr/share/tabset/vt100, il1=\E[L, 17677 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, 17678 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 17679 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 17680 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 17681 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 17682 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 17683 go140w|graphon go-140 in 132 column mode, 17684 am, 17685 cols#132, 17686 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, 17687 use=go140, 17688 # Hacked up vt200 termcap to handle GO-225/VT220 17689 # From: <edm (at] nwnexus.WA.COM> 17690 # (go225: I added <rmam>/<smam> based on the init string -- esr) 17691 go225|go-225|Graphon 225, 17692 OTbs, am, mir, xenl, 17693 cols#80, it#8, lines#25, vt#3, 17694 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 17695 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, 17696 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 17697 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, 17698 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, 17699 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 17700 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, 17701 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, 17702 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, 17703 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, 17704 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, 17705 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 17706 17707 #### Harris (Beehive) 17708 # 17709 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. 17710 # Their terminal group is ancient history now (1995) though the parent 17711 # company is still in business. 17712 # 17713 17714 # Beehive documentation is undated and marked Preliminary and has no figures 17715 # so we must have early Superbee2 (Model 600, according to phone conversation 17716 # with mfr.). It has proved reliable except for some missing padding 17717 # (notably after \EK and <nl> at bottom of screen). 17718 # 17719 # The key idea is that AEP mode is poison for <cup> & that US's in 17720 # the local memory should be avoided like the plague. That means 17721 # that the 2048 character local buffer is used as 25 lines of 80 17722 # characters, period. No scrolling local memory, folks. It also 17723 # appears that we cannot use naked INS LINE feature since it uses 17724 # US. The sbi fakes <il1> with an 80-space insert that may be too 17725 # slow at low speeds; also spaces get converted to \040 which is 17726 # too long for some programs (not vi). DEL LINE is ok but slow. 17727 # 17728 # The <nl> string is designed for last line of screen ONLY; cup to 17729 # 25th line corrects the motion inherent in scrolling to Page 1. 17730 # 17731 # There is one understood bug. It is that the screen appears to 17732 # pop to a new (blank) page after a <nel>, or leave a half-line 17733 # ellipsis to a quad that is the extra 48 memory locations. The 17734 # data received is dumped into memory but not displayed. Not to 17735 # worry if <cup> is being used; the lines not displayed will be, 17736 # whenever the cursor is moved up there. Since <cup> is addressed 17737 # relative to MEMORY of window, nothing is lost; but beware of 17738 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended, 17739 # therefore, is setenv MORE -c . 17740 # 17741 # WARNING: Not all features tested. 17742 # 17743 # Timings are assembled from 3 sources. Some timings may reflect 17744 # SB2/Model 300 that were used if more conservative. 17745 # Tested on a Model 600 at 1200 and 9600 bd. 17746 # 17747 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly 17748 # placed on the keyboard and useless because of AEP, is made 17749 # into a backspace key. In use ESC must be pressed twice (to send) 17750 # and sending ^C must be prefixed by ESC to avoid that weird 17751 # transmit mode associated with ENTER key. 17752 # 17753 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across 17754 # the screen, then it has dropped into ENTER mode; hit 17755 # RESET--ONLINE--!tset. 17756 # 17757 # As delivered this machine has a FATAL feature that will throw 17758 # it into that strange transmit state (SPOW) if the space bar is 17759 # hit after a CR is received, but before receiving a LF (or a 17760 # few others). 17761 # 17762 # The circuits MUST be modified to eliminate the SPOW latch. 17763 # This is done by strapping on chip A46 of the I/O board; cut 17764 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that 17765 # chip. This mod has been checked out on a Mod 600 of Superbee II. 17766 # With this modification absurdly high timings on cr are 17767 # unnecessary. 17768 # 17769 # NOTE WELL that the rear panel switch should be set to CR/LF, 17770 # not AEP! 17771 # 17772 sb1|Beehive SuperBee, 17773 OTbs, am, bw, da, db, mir, ul, xsb, 17774 cols#80, lines#25, xmc#1, 17775 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, 17776 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d, 17777 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, 17778 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1, 17779 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s 17780 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s 17781 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s 17782 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>, 17783 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, 17784 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, 17785 kf0=\E2, kf9=\E1, khome=\EH, kich1=\EQ\EO, krmir=\ER, 17786 lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, rmso=\E_3, 17787 rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, smso=\E_1, 17788 smul=\E_0, tbc=\E3, use=hp+pfk-cr, 17789 sbi|superbee|Beehive SuperBee at Indiana U., 17790 xsb, 17791 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA, 17792 use=sb1, 17793 # Alternate (older) description of Superbee - f1=escape, f2=^C. 17794 # Note: there are at least 3 kinds of superbees in the world. The sb1 17795 # holds onto escapes and botches ^C's. The sb2 is the best of the 3. 17796 # The sb3 puts garbage on the bottom of the screen when you scroll with 17797 # the switch in the back set to CRLF instead of AEP. This description 17798 # is tested on the sb2 but should work on all with either switch setting. 17799 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for 17800 # the other two if you want to try to hit that tiny escape key. 17801 # This description is tricky: being able to use cup depends on there being 17802 # 2048 bytes of memory and the hairy <nl> string. 17803 superbee-xsb|Beehive SuperBee (improved), 17804 am, da, db, xsb, 17805 cols#80, it#8, lines#25, 17806 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n, 17807 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, 17808 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, 17809 home=\EH, ht=^I, hts=\E1, 17810 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ, 17811 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 17812 rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, use=hp+pfk-cr, 17813 # This loses on lines > 80 chars long, use at your own risk 17814 superbeeic|SuperBee with insert char, 17815 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb, 17816 sb2|sb3|fixed SuperBee, 17817 xsb@, use=superbee, 17818 17819 #### Beehive Medical Electronics 17820 # 17821 # Steve Seymour <srseymour (at] mindspring.com> writes (Wed, 03 Feb 1999): 17822 # Regarding your question though; Beehive terminals weren't made by Harris. 17823 # They were made by Beehive Medical Electronics in Utah. They went out of 17824 # business in the early '80s. 17825 # 17826 # (OK, then, I don't know why a couple of these say "Harris Beehive".) 17827 # 17828 17829 # Reports are that most of these Beehive entries (except superbee) have not 17830 # been tested and do not work right. <rmso> is a trouble spot. Be warned. 17831 17832 # (bee: <ich1> was empty, which is obviously bogus -- esr) 17833 beehive|bee|Harris Beehive, 17834 OTbs, am, mir, 17835 cols#80, lines#24, 17836 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 17837 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 17838 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>, 17839 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 17840 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, 17841 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, 17842 smir=\EQ, smso=\EdP, smul=\Ed`, 17843 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. 17844 # good grief - does this entry make :sg:/:ug: when it doesn't have to? 17845 # look at those spaces in <rmso>/<smso>. Seems strange to me... 17846 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you 17847 # really care, cook up one using ^F -- esr) 17848 beehive3|bh3m|beehiveIIIm|Harris Beehive 3m, 17849 OTbs, am, 17850 cols#80, it#8, lines#20, 17851 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K, 17852 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F, 17853 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s, 17854 beehive4|bh4|Beehive 4, 17855 am, 17856 cols#80, lines#24, 17857 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC, 17858 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n, 17859 # There was an early Australian kit-built computer called a "Microbee". 17860 # It's not clear whether this is for one of those or for a relative 17861 # of the Beehive. 17862 microb|microbee|Micro Bee series, 17863 OTbs, am, 17864 cols#80, it#8, lines#24, 17865 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 17866 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 17867 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 17868 kcuu1=\EA, kf9=\Ex, khome=\EH, rmso=\Ed@, rmul=\Ed@, 17869 sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, use=hp+pfk-cr, 17870 17871 # 8675, 8686, and bee from Cyrus Rahman 17872 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) 17873 ha8675|Harris 8675, 17874 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, 17875 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei, 17876 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?, 17877 kf9=\Ee, use=bee, 17878 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation 17879 # in :is: -- esr) 17880 ha8686|Harris 8686, 17881 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83# 17882 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750 17883 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8 17884 FB5021B7283#, 17885 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C, 17886 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C, 17887 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI, 17888 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee, 17889 17890 #### Hazeltine 17891 # 17892 # Hazeltine appears to be out of the terminal business as of 1995. These 17893 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with 17894 # Harris. They have a hazeltine.com domain (but no web page there ) and can 17895 # be reached at: 17896 # 17897 # Hazeltine 17898 # 450 East Pulaski Road 17899 # Greenlawn, New York 11740 17900 # 17901 # As late as 1993, manuals for the terminal product line could still be 17902 # purchased from: 17903 # 17904 # TRW Customer Service Division 17905 # 15 Law Drive 17906 # P.O. Box 2076 17907 # Fairfield, NJ 07007-2078 17908 # 17909 # They're now (1998) a subsidiary of General Electric, operating under the 17910 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page 17911 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>. 17912 # 17913 17914 # Since <cuf1> is blank, when you want to erase something you 17915 # are out of luck. You will have to do ^L's a lot to 17916 # redraw the screen. h1000 is untested. It doesn't work in 17917 # vi - this terminal is too dumb for even vi. (The code is 17918 # there but it isn't debugged for this case.) 17919 hz1000|Hazeltine 1000, 17920 OTbs, 17921 cols#80, lines#12, 17922 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K, 17923 ind=\n, 17924 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 17925 hz1420|Hazeltine 1420, 17926 OTbs, am, 17927 cols#80, lines#24, 17928 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P, 17929 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, 17930 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y, 17931 smso=\E^_, 17932 # New "safe" cursor movement (11/87) from <cgs (at] umd5.umd.edu>. Prevents 17933 # freakout with out-of-range args and tn3270. No hz since it needs to 17934 # receive tildes. 17935 hz1500|Hazeltine 1500, 17936 OTbs, am, hz, 17937 cols#80, lines#24, 17938 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P, 17939 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c, 17940 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R, 17941 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P, 17942 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, 17943 # h1510 assumed to be in sane escape mode. Else use h1500. 17944 # (h1510: early versions of this entry apparently had "<rmso=\E^_>, 17945 # <smso=\E^Y>, but these caps were commented out in 8.3; also, 17946 # removed incorrect and overridden ":do=^J:" -- esr) 17947 hz1510|Hazeltine 1510, 17948 OTbs, am, 17949 cols#80, lines#24, 17950 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P, 17951 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, 17952 el=\E^O, il1=\E^Z, ind=\n, 17953 # Hazeltine 1520 17954 # The following switch settings are assumed for normal operation: 17955 # FULL CR U/L_CASE ESCAPE 17956 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON 17957 # Other switches may be set for operator convenience or communication 17958 # requirements. 17959 hz1520|Hazeltine 1520, 17960 OTbs, am, bw, msgr, 17961 cols#80, lines#24, 17962 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n, 17963 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 17964 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H, 17965 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, 17966 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, 17967 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, 17968 # This version works with the escape switch off 17969 # (h1520: removed incorrect and overridden ":do=^J:" -- esr) 17970 hz1520-noesc|Hazeltine 1520 (no escape), 17971 am, hz, 17972 cols#80, lines#24, 17973 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P, 17974 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O, 17975 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_, 17976 # Note: the h1552 appears to be the first Hazeltine terminal which 17977 # is not braindamaged. It has tildes and backprimes and everything! 17978 # Be sure the auto lf/cr switch is set to cr. 17979 hz1552|Hazeltine 1552, 17980 OTbs, 17981 cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green, 17982 use=vt52, 17983 hz1552-rv|Hazeltine 1552 reverse video, 17984 cud1=\n, rmso=\ET, smso=\ES, use=hz1552, 17985 # Note: h2000 won't work well because of a clash between upper case and ~'s. 17986 hz2000|Hazeltine 2000, 17987 OTbs, OTnc, am, 17988 cols#74, lines#27, 17989 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n, 17990 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R, 17991 il1=~\032$<6>, ind=\n, pad=^?, 17992 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: 17993 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems 17994 # to work ok. There is one problem though if one types a lot of garbage 17995 # characters very fast vi seems not able to keep up and hangs while trying 17996 # to insert. That's in insert mode while trying to insert in the middle of 17997 # a line. It might be because the Esprit doesn't have insert char and delete 17998 # char as a built in function. Vi has to delete to end of line and then 17999 # redraw the rest of the line. 18000 esprit|Hazeltine Esprit I, 18001 OTbs, am, bw, 18002 cols#80, lines#24, 18003 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, 18004 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 18005 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H, 18006 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n, 18007 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n, 18008 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R, 18009 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9, 18010 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_, 18011 esprit-am|Hazeltine esprit auto-margin, 18012 am, use=esprit, 18013 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL 18014 # Vi it seems always wants to send a control J for "do" and it turned out 18015 # that the terminal would work somewhat if the auto LF/CR was turned off. 18016 # (hmod1: removed :dn=~^K: -- esr) 18017 hmod1|Hazeltine Modular 1, 18018 OTbs, am, hz, 18019 cols#80, lines#24, 18020 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P, 18021 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z, 18022 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R, 18023 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_, 18024 # 18025 # Hazeltine Executive 80 Model 30 (1554?) 18026 # from Will Martin <control (at] ALMSA-1.ARPA> via BRL 18027 # Like VT100, except for different "am" behavior. 18028 hazel|exec80|h80|he80|Hazeltine Executive 80, 18029 OTbs, OTpt, am, 18030 cols#80, it#8, lines#24, vt#3, 18031 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 18032 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 18033 cub1=^H, cud1=\n, cuf1=\E[C$<2/>, 18034 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 18035 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 18036 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 18037 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 18038 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 18039 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 18040 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 18041 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 18042 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, 18043 smul=\E[4m$<2/>, 18044 18045 #### IBM 18046 # 18047 18048 ibm327x|line mode IBM 3270 style, 18049 gn, 18050 clear=\r\n, el=\r, home=\r, 18051 18052 ibm3101|i3101|IBM 3101-10, 18053 OTbs, am, xon, 18054 cols#80, lines#24, 18055 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 18056 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 18057 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB, 18058 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH, 18059 ibm3151|IBM 3151 display, 18060 is2=\E S, rmacs=\E>B, rs2=\E S, 18061 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%; 18062 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t 18063 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;, 18064 sgr0=\E4@\E>B, smacs=\E>A, use=ibm3162, 18065 # From: Mark Easter <marke (at] fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 18066 # removed kend, knp, kpp -TD 18067 # 18068 # From: Stephen Powell <zlinuxman (at] wowway.com> 23 Apr 2015 18069 # Added ich1 (kich1 without ich1 doesn't make sense). 18070 # Added il1 (kil1 without il1 doesn't make sense). 18071 # Added xon (terminal uses XON/XOFF flow control). 18072 # 18073 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display, 18074 OTbs, am, mir, msgr, xon, 18075 cols#80, it#8, lines#24, 18076 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x 18077 \370, 18078 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED, 18079 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 18080 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, 18081 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2, 18082 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 18083 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, 18084 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, 18085 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, 18086 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, 18087 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, 18088 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, 18089 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, 18090 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, 18091 rmcup=\E>A, rmso=\E4@, rmul=\E4@, 18092 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%; 18093 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t 18094 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;, 18095 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B, 18096 18097 ibm3161-C|IBM 3161-C NLS terminal using cartridge, 18098 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161, 18099 # 18100 # From: Stephen Powell <zlinuxman (at] wowway.com> 23 Apr 2015 18101 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits 18102 # it from ibm3161. 18103 # 18104 ibm3162|IBM 3162 display, 18105 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a, 18106 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a, 18107 use=ibm3161-C, 18108 18109 # This really should not use setab/setaf, but it is clear that the 18110 # original terminfo does not toggle red/blue colors as in setb/setf. 18111 ibm3164|i3164|IBM 3164, 18112 msgr, 18113 colors#8, pairs#64, 18114 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A, 18115 setab=\E4 %p1%{64}%+%c, 18116 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@, 18117 smcup=\E!9/N\E>B, use=ibm3161, 18118 18119 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display, 18120 am, bw, msgr, xon, 18121 cols#80, it#8, lines#25, 18122 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x 18123 \263, 18124 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 18125 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 18126 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18127 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 18128 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, 18129 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 18130 invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q, 18131 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 18132 ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q, 18133 kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, 18134 kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, 18135 kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, 18136 kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, 18137 kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, 18138 kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, 18139 kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, 18140 kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, 18141 kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H, 18142 kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q, 18143 kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T, 18144 rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, 18145 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 18146 %;%?%p7%t;8%;m, 18147 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 18148 use=ecma+index, 18149 18150 ibmaed|IBM Experimental display, 18151 OTbs, am, eo, msgr, 18152 cols#80, it#8, lines#52, 18153 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, 18154 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 18155 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP, 18156 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 18157 rmso=\E0, sgr0=\E0, smso=\E0, 18158 ibm-apl|apl|IBM apl terminal simulator, 18159 lines#25, use=dm1520, 18160 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. 18161 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) 18162 ibmmono|IBM workstation monochrome, 18163 eslok, hs, 18164 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL, 18165 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET, 18166 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, 18167 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, 18168 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, 18169 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, 18170 use=ibm3101, 18171 ibmega|IBM Enhanced Color Display, 18172 ht=^I, kcub1=^H, kcud1=\n, use=ibmmono, 18173 # This color scheme is assumed in some recent IBM terminal descriptions 18174 # (green on black, emulated on a 16-color terminal). 18175 ibm+color|IBM color definitions, 18176 colors#8, ncv#3, pairs#64, 18177 op=\E[32m\E[40m, 18178 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e 18179 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6} 18180 %=%t46m%e%p1%{7}%=%t107m%;, 18181 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e 18182 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6} 18183 %=%t36m%e%p1%{7}%=%t97m%;, 18184 ibm+16color|IBM aixterm color definitions, 18185 colors#16, pairs#0x100, 18186 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, 18187 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, 18188 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e 18189 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 18190 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e 18191 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 18192 ibm5154|IBM 5154 Color display, 18193 ncv@, 18194 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 18195 use=ibm+color, 18196 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, 18197 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, 18198 use=ibmmono, 18199 ibmvga-c|IBM VGA display color termcap, 18200 ht=^I, kcub1=^H, kcud1=\n, use=ibmega-c, 18201 ibmvga|IBM VGA display, 18202 use=ibmega, 18203 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution 18204 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display, 18205 lines#32, 18206 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono, 18207 ibm6155|IBM 6155 Black & White display, 18208 blink@, bold@, use=ibm5151, 18209 # Advanced Monochrome (6153) and Color (6154) Graphics Display: 18210 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display, 18211 lines#31, 18212 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono, 18213 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, 18214 lines#31, 18215 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, 18216 use=ibmega-c, 18217 ibm6154|IBM 6154 Color displays, 18218 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 18219 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1 18220 2%;m, 18221 sgr0=\E[0;10m, use=ibm5154, 18222 ibm6153|IBM 6153 Black & White display, 18223 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 18224 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1 18225 2%;m, 18226 sgr0=\E[0;10m, use=ibm5151, 18227 ibm6153-90|IBM 6153 Black & White display (36-line), 18228 cols#90, lines#36, 18229 blink@, bold@, use=ibm5151, 18230 ibm6153-40|IBM 6153 Black & White display (12-line), 18231 cols#40, lines#12, use=ibm6153-90, 18232 ibm8512|ibm8513|IBM color VGA Terminal, 18233 mir, 18234 cub1=\E[D, is2=\Eb\E[m\017\E[?7h, kf0=\E[010q, rc=\E[u, 18235 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l, 18236 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, 18237 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, 18238 smdc=\E[4h, use=ibm8503, 18239 hft-c|HFT with Color, 18240 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0, 18241 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B, 18242 use=ibm5151, use=ibm+color, 18243 hft-c-old|HFT with Color PC850, 18244 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 18245 use=ibm+color, 18246 hft-old|AIWS High Function Terminal, 18247 am, xon, 18248 cols#80, lines#25, 18249 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 18250 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18251 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 18252 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, 18253 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 18254 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, 18255 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 18256 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, 18257 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m, 18258 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color, 18259 ibm-system1|system1|IBM system/1 computer, 18260 am, xt, 18261 cols#80, lines#24, 18262 bel=^G, clear=^Z, cub1=^H, cuf1=^\, 18263 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, 18264 ind=\n, 18265 # lft-pc850 : IBM Low Function Terminal Device 18266 # lft "supports" underline, bold, and blink in the sense that the lft code 18267 # sets all the right bits. HOWEVER, depending upon the adapter, these 18268 # attributes may or may not be supported by the device driver. 18269 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device, 18270 am, bw, msgr, xon, 18271 cols#80, it#8, lines#25, 18272 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x 18273 \263, 18274 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 18275 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 18276 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18277 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18278 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, 18279 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL, 18280 il1=\E[L, ind=\ED, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, 18281 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 18282 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, 18283 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, 18284 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q, 18285 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q, 18286 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q, 18287 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q, 18288 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q, 18289 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q, 18290 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q, 18291 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 18292 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q, 18293 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q, 18294 krmir=\E[4l, rev=\E[7m, ri=\EL, rmacs=\E(B, rmir=\E[4l, 18295 rmso=\E[0m, rmul=\E[0m, rs2=\Ec, 18296 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 18297 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 18298 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m, 18299 tbc=\E[3g, use=ecma+index, 18300 # "Megapel" refers to the display adapter, which was used with the IBM RT 18301 # aka IBM 6150. 18302 ibm5081|hft|IBM Megapel Color display, 18303 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, 18304 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154, 18305 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, 18306 lines#33, 18307 dsl=\Ej\EYA \EI\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c, 18308 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display, 18309 use=hft-c, 18310 ibm8514|IBM 8514/a color VGA display, 18311 eslok, hs, 18312 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft, 18313 ibm8514-c|IBM 8514 color display with standout and underline, 18314 lines#41, 18315 dsl=\Ej\EYI \EI\Ek, ht=^I, kcub1=^H, kcud1=\n, 18316 tsl=\Ej\EYI%+ \Eo, use=ibmega-c, 18317 18318 # 18319 # AIX entries. IBM ships these with AIX 3.2.5. 18320 # -- added rc, sc based on manpage -TD 18321 # -- added rmacs, smacs based on manpage -TD 18322 # Note that we could use ibm+16color, but that is not how IBM defines this one. 18323 aixterm|IBM Aixterm Terminal Emulator, 18324 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, rc=\E8, ri@, 18325 rmacs=\E(B, s0ds=\E(B, s1ds=\E(0, sc=\E7, 18326 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7 18327 %t;8%;m%?%p9%t\E(0%e\E(B%;, 18328 sgr0=\E[0;10m\E(B, smacs=\E(0, use=ibm6154, 18329 use=aixterm+sl, 18330 aixterm+sl|status line for AIXterm, 18331 eslok, hs, 18332 dsl=\E[?E, fsl=\E[?F, tsl=\E[?%p1%dT, 18333 18334 aixterm-m|IBM AIXterm Monochrome Terminal Emulator, 18335 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, ri@, s0ds=\E(B, 18336 s1ds=\E(0, 18337 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7 18338 %t;8%;m%?%p9%t\E(0%e\E(B%;, 18339 sgr0=\E[0;10m\E(B, use=ibm6153, use=aixterm+sl, 18340 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator, 18341 bold=\E[1m, ri@, 18342 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7 18343 %t;8%;m, 18344 use=ibm6153, use=aixterm+sl, 18345 jaixterm|IBM Kanji Aixterm Terminal Eemulator, 18346 acsc@, rmacs@, 18347 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8 18348 %;m, 18349 sgr0=\E[m, smacs@, use=aixterm, 18350 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator, 18351 acsc@, rmacs@, 18352 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8 18353 %;m, 18354 sgr0=\E[m, smacs@, use=aixterm-m, 18355 18356 # This flavor is adapted from xterm, in turn from aixterm documentation -TD 18357 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors, 18358 use=ibm+16color, use=aixterm, 18359 18360 #### Infoton/General Terminal Corp. 18361 # 18362 18363 # gt100 sounds like something DEC would come out with. Let's hope they don't. 18364 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), 18365 OTbs, am, 18366 cols#80, lines#24, 18367 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 18368 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, 18369 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, 18370 ind=\n, rmso=\Ea, smso=\Eb, 18371 18372 i400|Infoton 400, 18373 OTbs, am, 18374 cols#80, lines#25, 18375 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 18376 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A, 18377 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, 18378 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, 18379 18380 # (addrinfo: removed obsolete ":bc=^Z:" -- esr) 18381 addrinfo|cursor-addressable Infoton, 18382 cup=\037%p1%c%p2%c, home=^H, use=infoton, 18383 18384 # "VISTAR II/HZ Technical Users Manual" (May 1975). 18385 # 18386 infoton2|cursor-addressable Infoton VISTAR II, 18387 cup=~\021%p2%c%p1%c, home=^H, use=infoton, 18388 18389 # "VISTAR Technical User's Manual" (October 1972). 18390 # 18391 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr) 18392 infoton|Infoton VISTAR, 18393 am, 18394 cols#80, lines#24, 18395 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\, 18396 ed=^K, ind=\n, ll=^H^\, 18397 18398 # The ICL6402 was actually the Kokusai Display System 6402. 18399 # The 6404 was the KDS7372 (color version of the 6402). 18400 # 18401 # ICL6404 control codes follow: 18402 # 18403 #code function 18404 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 18405 #ctrl-A set SOM position at cursor position 18406 #ctrl-G Bell 18407 #ctrl-H Backspace 18408 #ctrl-I Horizontal tab 18409 #ctrl-J Linefeed 18410 #ctrl-K Cursor up 18411 #ctrl-L Cursor right 18412 #ctrl-M Carriage return 18413 #ctrl-N Disable xon/xoff to host 18414 #ctrl-O Enable xon/xoff to host 18415 #ctrl-R Enable bidirectional mode 18416 #ctrl-T Disable bidirectional mode 18417 #ctrl-V Cursor down 18418 #ctrl-Z Clear unprotected data to insert char 18419 #ctrl-^ Cursor home 18420 #ctrl-_ Newline 18421 # 18422 #ESC lead-in char for multiple character command 18423 # 18424 #ESC space R execute power on sequence 18425 #ESC ! p1 p2 define scroll region: 18426 # p1 = scroll top line: 20h - 37h 18427 # p1 = scroll bottom line: 20h - 37h 18428 #ESC " unlock keyboard 18429 #ESC # lock keyboard 18430 #ESC $ Semi-graphics mode on 18431 #ESC % Semi-graphics mode off 18432 #ESC & protect mode on 18433 #ESC ' protect mode off 18434 #ESC ( write protect mode off (full intensity) 18435 #ESC ) write protect mode on (half intensity) 18436 # 18437 #ESC * clear screen 18438 #ESC + clear unprotected data to insert char 18439 #ESC , clear unprotected data to half intensity spaces 18440 #ESC - p1 p2 p3 p4 address cursor to page, row, column: 18441 # p1 = page number 0 - 3 18442 # p2 = row 20h - 7fh 18443 # p3 = column (lo) 20h - 7fh 18444 # p4 = column (hi) 20h - 21h (only 132 col) 18445 #ESC . p1 set cursor style: 18446 # p1 = 0 invisible cursor 18447 # p1 = 1 block blinking cursor 18448 # p1 = 2 block steady cursor 18449 # p1 = 3 underline blinking cursor 18450 # p1 = 4 underline steady cursor 18451 #ESC / transmit cursor location (page, row, column) 18452 #ESC 0 p1 p2 p3 p4 program edit key: 18453 # p1 = edit key code: '@'-'S', '`'-'s' 18454 # p2 p3 p4 = program data (3 bytes) 18455 # 18456 #ESC 1 set tab 18457 #ESC 2 clear tab at cursor 18458 #ESC 3 clear all tabs 18459 #ESC 4 send unprotect line to cursor 18460 #ESC 5 send unprotect page to cursor 18461 #ESC 6 send line to cursor 18462 #ESC 7 send page to cursor 18463 #ESC 8 n set scroll mode: 18464 # n = 0 set jump scroll 18465 # n = 1 set smooth scroll 18466 #ESC 9 n control display: 18467 # n = 0 display off 18468 # n = 1 display on 18469 #ESC : clear unprotected data to null 18470 #ESC ; clear unprotected data to insert char 18471 # 18472 #ESC < keyclick on 18473 #ESC = p1 p2 address cursor to row, column 18474 # p1 = row 20h - 7fh 18475 # p2 = column (lo) 20h - 7fh 18476 # p3 = column (hi) 20h - 21h (only 132 col) 18477 #ESC > keyclick off 18478 #ESC ? transmit cursor location (row, column) 18479 # 18480 #ESC @ copy print mode on 18481 #ESC A copy print mode off 18482 #ESC B block mode on 18483 #ESC C block mode off (conversation mode) 18484 #ESC D F set full duplex 18485 #ESC D H set half duplex 18486 #ESC E line insert 18487 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd) 18488 # 0 = black, 1 = red, 2 = green, 3 = yellow 18489 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white 18490 #ESC G n set serial field attribute (n = 30h - 3Fh) 18491 #ESC H n full graphics mode: 18492 # n = 0 exit full graphics mode 18493 # n = 1 enter full graphics mode 18494 #ESC I back tab 18495 #ESC J back page 18496 #ESC K forward page 18497 # 18498 #ESC L unformatted page print 18499 #ESC M L move window left (132 col mode only) 18500 #ESC M R move window right (132 col mode only) 18501 #ESC N set page edit (clear line edit) 18502 #ESC O set line edit (clear page edit) 18503 #ESC P formatted page print 18504 #ESC Q character insert 18505 #ESC R line delete 18506 #ESC S send message unprotected only 18507 #ESC T erase line to insert char 18508 #ESC U set monitor mode (see ESC X, ESC u) 18509 # 18510 #ESC V n select video attribute mode: 18511 # n = 0 serial field attribute mode 18512 # n = 1 parallel character attribute mode 18513 #ESC V 2 n define line attribute: 18514 # n = 0 single width single height 18515 # n = 1 single width double height 18516 # n = 2 double width single height 18517 # n = 3 double width double height 18518 #ESC V 3 n select character font: 18519 # n = 0 system font 18520 # n = 1 user defined font 18521 #ESC V 4 n select screen mode: 18522 # n = 0 page screen mode 18523 # n = 1 virtual screen mode 18524 #ESC V 5 n control mouse mode: 18525 # n = 0 disable mouse 18526 # n = 1 enable sample mode 18527 # n = 2 send mouse information 18528 # n = 3 enable request mode 18529 #ESC W character delete 18530 #ESC X clear monitor mode (see ESC U, ESC u) 18531 #ESC Y erase page to insert char 18532 # 18533 #ESC Z n send user/status line: 18534 # n = 0 send user line 18535 # n = 1 send status line 18536 # n = 2 send terminal ID 18537 #ESC [ p1 p2 p3 set character attribute (parallel char mode): 18538 # p1: 0 = normal 18539 # 1 = blank 18540 # 2 = blink 18541 # 3 = blink blank (= blank) 18542 # 4 = reverse 18543 # 5 = reverse blank 18544 # 6 = reverse blink 18545 # 7 = reverse blink blank (= reverse blank) 18546 # 8 = underline 18547 # 9 = underline blank 18548 # : = underline blink 18549 # ; = underline blink blank 18550 # < = reverse underline 18551 # = = reverse underline blank 18552 # > = reverse underline blink 18553 # ? = reverse underline blink blank 18554 # p2, p3: f/grnd, b/grnd colour 18555 # (see ESC F for colours) 18556 # use ZZ for mono, eg. 18557 # ESC [ 0 Z Z for normal 18558 # ESC [ 4 Z Z for inverse etc. 18559 # 18560 #ESC \ n set page size: 18561 # n = 1 24 lines/page 18562 # n = 2 48 lines/page 18563 # n = 3 72 lines/page 18564 # n = 4 96 lines/page 18565 #ESC ] n set Wordstar mode: 18566 # n = 0 normal (KDS7372) mode 18567 # n = 1 Wordstar mode 18568 # 18569 #ESC b set foreground colour screen 18570 # 18571 #ESC c n enter self-test mode: 18572 # n = 0 exit self test mode 18573 # n = 1 ROM test 18574 # n = 2 RAM test 18575 # n = 3 NVRAM test 18576 # n = 4 screen display test 18577 # n = 5 main/printer port test 18578 # n = 6 mouse port test 18579 # n = 7 graphics board test 18580 # n = 8 graphics memory test 18581 # n = 9 display all 'E' 18582 # n = : display all 'H' 18583 #ESC d set background colour screen 18584 # 18585 #ESC e n program insert char (n = insert char) 18586 #ESC f text CR load user status line with 'text' 18587 # 18588 #ESC g display user status line on 25th line 18589 #ESC h display system status line on 25th line 18590 #ESC i tab 18591 #ESC j reverse linefeed 18592 #ESC k n duplex/local edit mode: 18593 # n = 0 duplex edit mode 18594 # n = 1 local edit mode 18595 #ESC l n select virtual screen: 18596 # n = 0 screen 1 18597 # n = 1 screen 2 18598 #ESC m save current config to NVRAM 18599 #ESC n p1 select display screen: 18600 # p1 = 0 screen 1 18601 # p1 = 1 screen 2 18602 # p1 = 2 screen 3 18603 # p1 = 3 screen 4 18604 #ESC o p1 p2 set characters/line and attribute: 18605 # p1 = 0 80 chars/line 18606 # 18607 #ESC o p1 p2 set characters/line and attribute: 18608 # p1 = 0 80 chars/line 18609 # p1 = 1 132 chars/line 18610 # p2 = 0 single width single height 18611 # p2 = 1 single width double height 18612 # p2 = 2 double width single height 18613 # p2 = 3 double width double height 18614 # 18615 #ESC q insert mode on 18616 #ESC r edit mode on 18617 #ESC s send message all 18618 #ESC t erase line to null 18619 #ESC u clear monitor mode (see ESC U, ESC X) 18620 #ESC v autopage mode on 18621 #ESC w autopage mode off 18622 #ESC x p1 p2 p3 define delimiter code... 18623 #ESC y erase page to null 18624 # 18625 #ESC z 2 p1 p2 p3 p4 draw quadrangle: 18626 # p1 = starting row 18627 # p2 = starting column 18628 # p3 = end row 18629 # p4 = end column 18630 # 18631 #ESC { p1 p2 p3 p4 configure main port 18632 # (baud, stop bits, parity, word length) 18633 # 18634 #ESC | p1 p2 text Ctrl-Y program function key with 'text': 18635 # p1 = function key code: 18636 # '1' - ';' normal f1- f11 18637 # '<' - 'F' shifted f1 - f11 18638 # p2 = program mode: 18639 # 1 = FDX 18640 # 2 = LOC 18641 # 3 = HDX 18642 # Ctrl-Y = terminator 18643 # (use Ctrl-P to escape ^P, ^Y ) 18644 # 18645 #ESC } p1 p2 p3 p4 configure printer port 18646 # (baud, stop bits, parity, word length) 18647 #ESC ~ send system status 18648 # 18649 # Codes and info from Peter Disdale <pete (at] pdlmail.demon.co.uk> 12 May 1997 18650 # 18651 # Entry is by esr going solely on above information and is UNTESTED. 18652 # This actually looks a lot like a TeleVideo 9xx. 18653 # This entry uses page 0 and is monochrome; I'm not brave enough to try 18654 # to make color work without a test terminal. The <am> capability is a guess. 18655 # The initialization string sets conversation mode, blinking underline cursor, 18656 # full duplex, parallel attribute mode, display user status line, white 18657 # foreground, black background, normal highlight. 18658 # 18659 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372, 18660 OTbs, am, hs, 18661 cols#80, lines#24, 18662 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, 18663 cnorm=\E.3, cr=\r, csr=\E!%p1%{32}%+%c%p2%{32}%+%c, 18664 cub1=^H, cud1=^V, cuf1=^L, 18665 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c, 18666 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I, 18667 hts=\E1, il1=\EE, invis=\E[1ZZ, 18668 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ, 18669 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ, 18670 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1, 18671 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%? 18672 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ, 18673 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3, 18674 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols, 18675 rs2=\Eo1, use=icl6404, 18676 18677 #### Interactive Systems Corp 18678 # 18679 # ISC used to sell OEMed and customized hardware to support ISC UNIX. 18680 # ISC UNIX still exists in 1995, but ISC itself is no more; they got 18681 # bought out by Sun. 18682 # 18683 18684 # From: <cithep!eric> Wed Sep 16 08:06:44 1981 18685 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the 18686 # ":le=^_:" later overridden -- esr) 18687 intext|Interactive Systems Corporation modified owl 1200, 18688 OTbs, am, 18689 cols#80, it#8, lines#24, xmc#1, 18690 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n, 18691 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\, 18692 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>, 18693 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H, 18694 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, 18695 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r, 18696 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<, 18697 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036:\264\026%%, 18698 smso=^V$\,, 18699 intext2|intextii|INTERACTIVE modified owl 1251, 18700 am, bw, ul, 18701 cols#80, lines#24, xmc#0, 18702 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D, 18703 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 18704 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 18705 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, 18706 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, 18707 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r, 18708 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, 18709 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, 18710 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO, 18711 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, 18712 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D, 18713 smul=\E[18 D, 18714 18715 #### Kimtron (abm, kt) 18716 # 18717 # Kimtron seems to be history, but as March 1998 these people are still 18718 # offering repair services for Kimtron equipment: 18719 # 18720 # Com/Pair Monitor Service 18721 # 1105 N. Cliff Ave. 18722 # Sioux Falls, South Dakota 57103 18723 # 18724 # WATS voice: 1-800/398-4946 18725 # POTS fax: +1 605/338-8709 18726 # POTS voice: +1 605/338-9650 18727 # Email: <compair (at] sd.cybernex.net> 18728 # Internet/Web: <http://www.com-pair.com> 18729 # 18730 # Kimtron entries include (undocumented) codes for: enter dim mode, 18731 # enter bold mode, enter reverse mode, turn off all attributes. 18732 # 18733 18734 # Kimtron ABM 85 added by Dual Systems 18735 # (abm85: removed duplicated ":kd=^J:" -- esr) 18736 abm85|Kimtron ABM 85, 18737 OTbs, am, bw, msgr, 18738 cols#80, it#8, lines#24, xmc#1, 18739 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L, 18740 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 18741 dl1=\ER, ed=\Ey, el=\Et, ht=^I, 18742 if=/usr/share/tabset/stdcrt, il1=\EE, 18743 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H, 18744 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek, 18745 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El, 18746 # Kimtron ABM 85H added by Dual Systems. 18747 # Some notes about the abm85h entries: 18748 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for 18749 # firmware revs prior to SP51 18750 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the 18751 # abm85e entry if it is in tvi920 emulation mode. They are incompatible 18752 # in some places and NOT software settable i.e., <is2> can't fix it) 18753 # 3) In 85h mode, the arrow keys and special functions transmit when 18754 # the terminal is in dup-edit, and work only locally in local-edit. 18755 # Vi won't swallow `del char' for instance, but <smcup> turns on 18756 # dup-edit anyway so that the arrow keys will work right. If the 18757 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and 18758 # <is2>. Note that 920E mode does not have software commands to toggle 18759 # between dup and local edit, so you get whatever was set last on the 18760 # terminal. 18761 # 4) <flash> attribute is nice, but seems too slow to work correctly 18762 # (\Eb<pad>\Ed) 18763 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes 18764 # are selected, the <xmc@> entry should be removed. 18765 # 6) auto new-line should be on (selectable from setup mode only) 18766 # 18767 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985 18768 abm85h|Kimtron ABM 85H native mode, 18769 hs, 18770 xmc@, 18771 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, 18772 fsl=\r, invis@, 18773 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r 18774 \EG0\Ed\E.4\El, 18775 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr, 18776 use=abm85, 18777 abm85e|Kimtron ABM 85H in 920E mode, 18778 xmc@, 18779 bel=^G, dim=\E), flash@, 18780 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq 18781 \Em, 18782 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 18783 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., 18784 xmc@, 18785 bel=^G, dim=\E), 18786 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9 18787 \EF, 18788 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 18789 # From: <malman (at] bbn-vax.arpa> 18790 # (kt7: removed obsolete :ma=^V^J^L :" -- esr) 18791 kt7|kimtron model kt-7, 18792 OTbs, am, 18793 cols#80, it#8, lines#24, 18794 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, 18795 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 18796 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 18797 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E", 18798 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, 18799 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, 18800 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 18801 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 18802 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr, 18803 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the 18804 # other kt7 entry and the adjacent key capabilities). Removed EE which is 18805 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight 18806 # but we can't figure out what. 18807 kt7ix|kimtron model kt-7 or 70 in IX mode, 18808 am, bw, 18809 cols#80, it#8, lines#25, 18810 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI, 18811 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, 18812 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 18813 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r, 18814 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n, 18815 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, 18816 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, 18817 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 18818 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 18819 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, 18820 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0, 18821 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, 18822 18823 #### Microdata/MDIS 18824 # 18825 # This was a line of terminals made by McDonnell-Douglas Information Systems. 18826 # These entries come direct from MDIS documentation. I have edited them only 18827 # to move primary names of the form p[0-9] * to aliases, and to comment out 18828 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have 18829 # also removed the change history; the last version indicates this is 18830 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). 18831 # 18832 18833 # McDonnell Information Systems Terminal Family History 18834 # ========================================= 18835 # 18836 # Prism-1, Prism-2 and P99: 18837 # Ancient Microdata and CMC terminals, vaguely like ADDS Regent 25. 18838 # 18839 # Prism-4 and Prism-5: 18840 # Slightly less ancient range of Microdata terminals. Follow-on from 18841 # Prism-2, but with many enhancements. P5 has eight display pages. 18842 # 18843 # Prism-6: 18844 # A special terminal for use with library systems, primarily in Germany. 18845 # Limited numbers. Similar functionality to P5 (except attributes?). 18846 # 18847 # Prism-7, Prism-8 and Prism-9: 18848 # More recent range of MDIS terminals, in which P7 and P8 18849 # replace the P4 & P5, with added functionality, and P9 is the flagship. 18850 # The P9 has two emulation modes - P8 and ANSI - and includes a 18851 # large number of the DEC VT220 control sequences. Both 18852 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats. 18853 # 18854 # Prism-12 and Prism-14: 18855 # Latest range, functionally very similar to the P9. The P14 has a 18856 # black-on-white overscanning screen. 18857 # 18858 # The terminfo definitions given here are: 18859 # 18860 # p2 - Prism-2 (or Prism-1 or P99). 18861 # 18862 # p4 - Prism-4 (and older P7s & P8s). 18863 # p5 - Prism-5 (or Prism-6). 18864 # 18865 # p7 - Prism-7. 18866 # p8 - Prism-8 (in national or multinational mode). 18867 # p8-w - 132 column version of p8. 18868 # p9 - Prism-9 in ANSI mode. 18869 # p9-w - 132 column version of p9. 18870 # p9-8 - Prism-9 in Prism-8 emulation mode. 18871 # p9-8-w - As p9-8, but with 132 columns. 18872 # 18873 # p12 - Prism-12 in ANSI mode. 18874 # p12-w - 132 column version of p12. 18875 # p12-m - Prism-12 in MDC emulation mode. 18876 # p12-m-w - As p12-m, but with 132 columns. 18877 # p14 - Prism-14 in ANSI mode. 18878 # p14-w - 132 column version of p14. 18879 # p14-m - Prism-14 in MDC emulation mode. 18880 # p14-m-w - As p14-m, but with 132 columns. 18881 # 18882 # p2: Prism-2 18883 # ----------- 18884 # 18885 # Includes Prism-1 and basic P99 without SP or MP loaded. 18886 # The simplest form of Prism-type terminal. 18887 # Basic cursor movement and clearing operations only. 18888 # No video attributes. 18889 # Notes: 18890 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 18891 # value up, followed by backspace. 18892 # 18893 prism2|MDC Prism-2, 18894 am, bw, msgr, 18895 cols#80, lines#24, 18896 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F, 18897 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%? 18898 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 18899 cuu1=^Z, ed=\EJ, el=\EK, home=^A, 18900 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc 18901 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 18902 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c, 18903 18904 # p4: Prism-4 18905 # ----------- 18906 # 18907 # Includes early versions of P7 & P8. 18908 # Basic family definition for most Prisms (except P2 and P9 ANSI). 18909 # Notes: 18910 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 18911 # value up, followed by backspace. 18912 # Cursor key definitions removed because they interfere with vi and csh keys. 18913 # 18914 prism4|p4|P4|MDC Prism-4, 18915 am, bw, hs, mc5i, msgr, 18916 cols#80, lines#24, wsl#72, xmc#1, 18917 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>, 18918 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F, 18919 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%? 18920 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 18921 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK, 18922 fsl=\035\345, home=^A, 18923 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc 18924 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 18925 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER, 18926 rev=^CD, rmso=^C\s, rmul=^C\s, 18927 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2} 18928 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;, 18929 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343, 18930 vpa=\013%p1%{32}%+%c, 18931 18932 # p5: Prism-5 18933 # ----------- 18934 # 18935 # Same definition as p4. Includes Prism-6 (not tested!). 18936 # Does not use any multi-page features. 18937 # 18938 prism5|p5|P5|MDC Prism-5, 18939 use=p4, 18940 18941 # p7: Prism-7 18942 # ----------- 18943 # 18944 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems. 18945 # Notes: 18946 # Use p4 for very early models of P7. 18947 # Rev-index removed; can't send nulls to terminal in 8-bit modes. 18948 # 18949 prism7|p7|P7|MDC Prism-7, 18950 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4, 18951 18952 # p8: Prism-8 18953 # ----------- 18954 # 18955 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems. 18956 # Supports national and multinational character sets. 18957 # Notes: 18958 # Alternate char set operations only work in multinational mode. 18959 # Use p4 for very early models of P8. 18960 # Rev-index removed; can't send nulls to terminal in 8-bit modes. 18961 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 18962 # 18963 prism8|p8|P8|MDC Prism-8, 18964 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h, 18965 vpa=\E[%i%p1%dd, use=p4, 18966 18967 # p8-w: Prism-8 in 132 column mode 18968 # -------------------------------- 18969 # 18970 # 'Wide' version of p8. 18971 # Notes: 18972 # Rev-index removed; can't send nulls to terminal in 8-bit modes. 18973 # 18974 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode, 18975 cols#132, 18976 is2=\E[<12h\E[<14h, use=p8, 18977 18978 # p9: Prism-9 in ANSI mode 18979 # ------------------------- 18980 # 18981 # The "flagship" model of this generation of terminals. 18982 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones. 18983 # Notes: 18984 # Tabs only reset by "reset". Otherwise assumes default (8 cols). 18985 # Fixes to deal with terminal firmware bugs: 18986 # . 'ri' uses insert-line since rev index doesn't always 18987 # . 'sgr0' has extra '0' since esc[m fails 18988 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25 18989 # Not covered in the current definition: 18990 # . Labels 18991 # . Programming Fn keys 18992 # . Graphic characters (defaults correctly to vt100) 18993 # . Padding values (sets xon) 18994 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 18995 # 18996 prism9|p9|P9|MDC Prism-9 in ANSI mode, 18997 am, bw, hs, msgr, xenl, xon, 18998 cols#80, it#8, lines#24, vt#3, wsl#72, 18999 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, 19000 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v, 19001 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 19002 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 19003 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 19004 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX, 19005 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, 19006 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, 19007 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D, 19008 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, 19009 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 19010 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 19011 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 19012 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 19013 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z, 19014 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l, 19015 rmso=\E[27m, rmul=\E[24m, 19016 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73 19017 \sN, 19018 sc=\E[%y, 19019 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%? 19020 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;, 19021 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m, 19022 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, 19023 use=ansi+pp, 19024 19025 # p9-w: Prism-9 in 132 column mode 19026 # -------------------------------- 19027 # 19028 # 'Wide' version of p9. 19029 # 19030 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode, 19031 cols#132, 19032 is2=\E[&p\E[<12l\E F\E[<14h, 19033 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9, 19034 19035 # p9-8: Prism-9 in P8 mode 19036 # ------------------------ 19037 # 19038 # P9 terminal in P8 emulation mode. 19039 # Similar to p8 definition. 19040 # Insertion and deletion operations possible. 19041 # 19042 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode, 19043 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 19044 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8, 19045 19046 # p9-8-w: Prism-9 in P8 and 132 column modes 19047 # ------------------------------------------ 19048 # 19049 # P9 terminal in P8 emulation mode and 132 column mode. 19050 # 19051 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode, 19052 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 19053 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w, 19054 19055 # p12: Prism-12 in ANSI mode 19056 # --------------------------- 19057 # 19058 # See p9 definition. 19059 # 19060 prism12|p12|P12|MDC Prism-12 in ANSI mode, 19061 use=p9, 19062 19063 # p12-w: Prism-12 in 132 column mode 19064 # ---------------------------------- 19065 # 19066 # 'Wide' version of p12. 19067 # 19068 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode, 19069 use=p9-w, 19070 19071 # p12-m: Prism-12 in MDC emulation mode 19072 # ------------------------------------- 19073 # 19074 # P12 terminal in MDC emulation mode. 19075 # Similar to p8 definition. 19076 # Insertion and deletion operations possible. 19077 # 19078 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode, 19079 use=p9-8, 19080 19081 # p12-m-w: Prism-12 in MDC emulation and 132 column modes 19082 # ------------------------------------------------------- 19083 # 19084 # P12 terminal in MDC emulation mode and 132 column mode. 19085 # 19086 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode, 19087 use=p9-8-w, 19088 19089 # p14: Prism-14 in ANSI mode 19090 # --------------------------- 19091 # 19092 # See p9 definition. 19093 # 19094 prism14|p14|P14|MDC Prism-14 in ANSI mode, 19095 use=p9, 19096 19097 # p14-w: Prism-14 in 132 column mode 19098 # ---------------------------------- 19099 # 19100 # 'Wide' version of p14. 19101 # 19102 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode, 19103 use=p9-w, 19104 19105 # p14-m: Prism-14 in MDC emulation mode 19106 # ------------------------------------- 19107 # 19108 # P14 terminal in MDC emulation mode. 19109 # Similar to p8 definition. 19110 # Insertion and deletion operations possible. 19111 # 19112 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode, 19113 use=p9-8, 19114 19115 # p14-m-w: Prism-14 in MDC emulation and 132 column modes 19116 # ------------------------------------------------------- 19117 # 19118 # P14 terminal in MDC emulation mode and 132 column mode. 19119 # 19120 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode, 19121 use=p9-8-w, 19122 19123 # End of McDonnell Information Systems Prism definitions 19124 19125 # These things were popular in the Pick database community at one time 19126 # From: George Land <georgeland (at] aol.com> 24 Sep 1996 19127 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition, 19128 am, bw, hs, mir, 19129 cols#80, lines#24, ma#1, wsl#78, xmc#1, 19130 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, 19131 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P, 19132 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U, 19133 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ, 19134 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r, 19135 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r, 19136 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 19137 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2, 19138 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r, 19139 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, 19140 smul=^C0, 19141 19142 #### Microterm (act, mime) 19143 # 19144 # The mime1 entries refer to the Microterm Mime I or Mime II. 19145 # The default mime is assumed to be in enhanced act iv mode. 19146 # 19147 19148 # New "safe" cursor movement (5/87) from <reuss (at] umd5.umd.edu>. Prevents 19149 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and 19150 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1> 19151 # since Sytek insists ^S means xoff. 19152 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) 19153 act4|microterm|microterm act iv, 19154 OTbs, am, 19155 cols#80, lines#24, 19156 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X, 19157 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c, 19158 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, 19159 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^], 19160 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X, 19161 kcuu1=^Z, 19162 # The padding on :sr: and :ta: for act5 and mime is a guess and not final. 19163 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... 19164 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) 19165 act5|microterm5|microterm act v, 19166 ri=\EH$<3>, uc=^H\EA, use=act4, 19167 # Mimes using brightness for standout. Half bright is really dim unless 19168 # you turn up the brightness so far that lines show up on the screen. 19169 mime-fb|full bright mime1, 19170 is2=^S\E, rmso=^S, smso=^Y, use=mime, 19171 mime-hb|half bright mime1, 19172 is2=^Y\E, rmso=^Y, smso=^S, use=mime, 19173 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode 19174 # the more plausible ":do=^J:" -- esr) 19175 # uc was at one time disabled to get around a curses bug, be wary of it 19176 mime|mime1|mime2|mimei|mimeii|microterm mime1, 19177 OTbs, am, 19178 cols#80, it#8, lines#24, vt#9, 19179 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X, 19180 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c, 19181 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>, 19182 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K, 19183 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U, 19184 # These termcaps (for mime2a) put the terminal in low intensity mode 19185 # since high intensity mode is so obnoxious. 19186 mime2a-s|microterm mime2a (emulating an enhanced Soroc iq120), 19187 OTbs, am, 19188 cols#80, lines#24, 19189 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 19190 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED, 19191 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, 19192 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n, 19193 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7, 19194 smir=\EE, smso=\E:, smul=\E6, 19195 # This is the preferred mode (but ^X can't be used as a kill character) 19196 mime2a|mime2a-v|microterm mime2a (emulating an enhanced VT52), 19197 OTbs, 19198 cols#80, it#8, lines#24, 19199 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 19200 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, 19201 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, 19202 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED, 19203 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, 19204 rmul=\E5, smir=^O, smso=\E8, smul=\E4, 19205 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) 19206 mime3a|mime1 emulating 3a, 19207 am@, 19208 kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a, 19209 mime3ax|mime-3ax|mime1 emulating enhanced 3a, 19210 it#8, 19211 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, 19212 use=mime3a, 19213 # Wed Mar 9 18:53:21 1983 19214 # We run our terminals at 2400 baud, so there might be some timing problems at 19215 # higher speeds. The major improvements in this model are the terminal now 19216 # scrolls down and insert mode works without redrawing the rest of the line 19217 # to the right of the cursor. This is done with a bit of a kludge using the 19218 # exit graphics mode to get out of insert, but it does not appear to hurt 19219 # anything when using vi at least. If you have some users using act4s with 19220 # programs that use curses and graphics mode this could be a problem. 19221 mime314|mm314|mime 314, 19222 am, 19223 cols#80, lines#24, 19224 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z, 19225 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H, 19226 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S, 19227 # Microterm mime 340 from University of Wisconsin 19228 mm340|mime340|mime 340, 19229 cols#80, lines#24, 19230 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 19231 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 19232 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, 19233 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,, 19234 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n, 19235 # This came from University of Wisconsin marked "astro termcap for jooss". 19236 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:"; 19237 # also added <rmam>/<smam> based on the init string -- esr) 19238 mt4520-rv|micro-term 4520 reverse video, 19239 am, hs, msgr, xenl, xon, 19240 cols#80, it#8, lines#24, wsl#80, 19241 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r, 19242 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 19243 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 19244 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 19245 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 19246 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, 19247 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 19248 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 19249 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H 19250 \E[J, 19251 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 19252 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 19253 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100, 19254 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m, 19255 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, 19256 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 19257 tbc=\E[g, tsl=\E[25;1H, 19258 19259 # Fri Aug 5 08:11:57 1983 19260 # This entry works for the ergo 4000 with the following setups: 19261 # ansi,wraparound,newline disabled, xon/xoff disabled in both 19262 # setup a & c. 19263 # 19264 # WARNING!!! There are multiple versions of ERGO 4000 microcode 19265 # Be advised that very early versions DO NOT WORK RIGHT !! 19266 # Microterm does have a ROM exchange program- use it or lose big 19267 # (ergo400: added <rmam>/<smam> based on the init string -- esr) 19268 ergo4000|microterm ergo 4000, 19269 da, db, msgr, 19270 cols#80, lines#66, 19271 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B, 19272 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 19273 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>, 19274 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>, 19275 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, 19276 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 19277 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3, 19278 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l, 19279 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>, 19280 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>, 19281 smso=\E[7m$<20>, 19282 19283 #### NCR 19284 # 19285 # NCR's terminal group was merged with AT&T's when AT&T bought the company. 19286 # For what happened to that group, see the ADDS section. 19287 # 19288 # There is an NCR4103 terminal that's just a re-badged Wyse-50. 19289 # 19290 19291 # The following vendor-supplied termcaps were captured from the Boundless 19292 # Technologies site, 8 March 1998. I removed all-upper-case names that were 19293 # identical, except for case, to lower-case ones. I also uncommented the acsc 19294 # capabilities.X 19295 # 19296 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a 19297 # DEC VT200/300 with color capabilities added. 19298 ncr260intan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard, 19299 colors#8, pairs#64, 19300 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 19301 use=decid+cpr, use=ncr260vt300an, 19302 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a 19303 # DEC VT200/300 with color capabilities added. 19304 ncr260intwan|NCR Intecolor emulation of the 2900/260C with an ANSI keyboard (132 column), 19305 colors#8, pairs#64, 19306 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 19307 use=decid+cpr, use=ncr260vt300wan, 19308 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a 19309 # DEC VT200/300 with color capabilities added. 19310 ncr260intpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard, 19311 colors#8, pairs#64, 19312 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 19313 use=ncr260vt300pp, 19314 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a 19315 # DEC VT200/300 with color capabilities added. 19316 ncr260intwpp|NCR Intecolor emulation of the 2900/260C with a PC+ keyboard (132 column), 19317 colors#8, pairs#64, 19318 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 19319 use=ncr260vt300wpp, 19320 # This definition for ViewPoint supports several attributes. This means 19321 # that it has magic cookies (extra spaces where the attributes begin). 19322 # Some applications do not function well with magic cookies. The System 19323 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 19324 # If supporting various attributes is not vital, 'xmc#1' and the extra 19325 # attributes can be removed. 19326 # Mapping to ASCII character set ('acsc' capability) can also be 19327 # restored if needed. 19328 ncr260vppp|NCR 2900/260 viewpoint, 19329 am, bw, km, mc5i, mir, msgr, xon, 19330 cols#80, lines#24, nlab#32, xmc#1, 19331 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2, 19332 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5, 19333 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>, 19334 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>, 19335 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, ed=\Ek$<2>, 19336 el=\EK$<2>, home=\036$<2>, ht=^I, hts=\E1, il1=\EM$<2>, 19337 ind=\n$<2>, invis=\EG1, 19338 is2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0 19339 \EcC1\Ee7$<100>, 19340 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ, 19341 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F, 19342 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B:\r, 19343 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r, 19344 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r, 19345 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r, 19346 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r, 19347 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r, 19348 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r, 19349 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP, 19350 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R, 19351 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>, 19352 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003, 19353 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 19354 rs2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0 19355 \EcC1\Ee7$<100>, 19356 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq, 19357 smso=\EG4, smul=\EG8, smxon=\Ec21, use=ncr260vp+sl, 19358 19359 ncr260vp+sl|NCR 2900/260 viewpoint with status-line, 19360 hs, 19361 dsl=\E`c, fsl=\r, tsl=\EF, 19362 19363 ncr260vpwpp|NCR 2900/260 viewpoint wide mode, 19364 cols#132, 19365 cup=\Ea%i%p1%dR%p2%dC$<30>, 19366 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0 19367 \EcC1\Ee7$<100>, 19368 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0 19369 \EcC1\Ee7$<100>, 19370 use=ncr260vppp, 19371 19372 ncr260vt100an|NCR 2900/260 VT100 with ANSI keyboard, 19373 am, mir, msgr, xenl, xon, 19374 cols#80, lines#24, nlab#32, 19375 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 19376 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>, 19377 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>, 19378 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 19379 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 19380 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 19381 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 19382 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX, 19383 ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, home=\E[H$<1>, 19384 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>, 19385 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>, 19386 indn=\E[%p1%dE$<5>, invis=\E[8m, 19387 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19388 200>, 19389 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 19390 khlp=\E[28~, kich1=\E[2~, krdo=\E[29~, nel=\EE$<5>, rc=\E8, 19391 rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l, 19392 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, 19393 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19394 200>, 19395 sc=\E7, 19396 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 19397 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, 19398 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h, 19399 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, 19400 vpa=\E[%p1%dd$<40>, use=decid+cpr, use=vt220+vtedit, 19401 use=vt220+cvis, use=vt220+keypad, use=ncr260vt+sl, 19402 ncr260vt+sl|NCR 2900/260 VT100 status line, 19403 hs, 19404 dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}, 19405 ncr260vt100wan|NCR 2900/260 VT100 wide mode ANSI keyboard, 19406 cols#132, 19407 cup=\E[%i%p1%d;%p2%dH$<30>, 19408 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19409 200>, 19410 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19411 200>, 19412 use=ncr260vt100an, 19413 ncr260vt100pp|NCR 2900/260 VT100 with PC+ keyboard, 19414 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 19415 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 19416 kend=\E[5~, khome=\E[2~, kich1=\E[1~, kpp=\E[3~, lf1=pf1, 19417 lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 19418 use=ncr260vt100an, 19419 ncr260vt100wpp|NCR 2900/260 VT100 wide mode PC+ keyboard, 19420 cols#132, 19421 cup=\E[%i%p1%d;%p2%dH$<30>, 19422 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19423 200>, 19424 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19425 200>, 19426 use=ncr260vt100pp, 19427 ncr260vt200an|NCR 2900/260 VT200 with ANSI keyboard, 19428 am, mir, msgr, xenl, xon, 19429 cols#80, lines#24, nlab#32, 19430 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 19431 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>, 19432 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>, 19433 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, 19434 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 19435 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 19436 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 19437 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>, 19438 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H, 19439 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>, 19440 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>, 19441 indn=\E[%p1%dE$<5>, invis=\E[8m, 19442 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19443 200>, 19444 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 19445 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 19446 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 19447 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 19448 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, 19449 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, 19450 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, 19451 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 19452 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i, 19453 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, 19454 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 19455 rmso=\E[27m, rmul=\E[24m, 19456 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19457 200>, 19458 sc=\E7, 19459 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 19460 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, 19461 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 19462 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 19463 tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=decid+cpr, 19464 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad, 19465 use=ncr260vt+sl, 19466 ncr260vt200wan|NCR 2900/260 VT200 wide mode ANSI keyboard, 19467 cols#132, 19468 cup=\E[%i%p1%d;%p2%dH$<30>, 19469 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 19470 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an, 19471 ncr260vt200pp|NCR 2900/260 VT200 with PC+ keyboard, 19472 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 19473 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 19474 kend=\E[1~, khome=\E[H, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 19475 rmkx=\E>, smkx=\E=, use=ncr260vt200an, 19476 ncr260vt200wpp|NCR 2900/260 VT200 wide mode PC+ keyboard, 19477 cols#132, 19478 cup=\E[%i%p1%d;%p2%dH$<30>, 19479 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19480 200>, 19481 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$< 19482 200>, 19483 use=ncr260vt200pp, 19484 ncr260vt300an|NCR 2900/260 VT300 with ANSI keyboard, 19485 am, mir, msgr, xenl, xon, 19486 cols#80, lines#24, nlab#32, 19487 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 19488 blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>, 19489 cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>, 19490 cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, 19491 cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 19492 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 19493 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 19494 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, ech=\E[%p1%dX$<5>, 19495 ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, home=\E[H, 19496 hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, ich=\E[%p1%d@$<5>, 19497 il=\E[%p1%dL$<5>, il1=\E[L$<5>, ind=\ED$<5>, 19498 indn=\E[%p1%dE$<5>, invis=\E[8m, 19499 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1 19500 ;1H\E>$<200>, 19501 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 19502 kf0=\EOy, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 19503 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 19504 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 19505 kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, 19506 kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, 19507 kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, 19508 kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 19509 kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, krdo=\E[29~, mc0=\E[i, 19510 mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, 19511 rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 19512 rmso=\E[27m, rmul=\E[24m, 19513 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1 19514 ;1H\E>$<200>, 19515 sc=\E7, 19516 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 19517 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, 19518 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 19519 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 19520 tbc=\E[3g, vpa=\E[%p1%dd$<40>, use=decid+cpr, 19521 use=vt220+vtedit, use=vt220+cvis, use=vt220+keypad, 19522 use=ncr260vt+sl, 19523 ncr260vt300wan|NCR 2900/260 VT300 wide mode ANSI keyboard, 19524 cols#132, 19525 cup=\E[%i%p1%d;%p2%dH$<30>, 19526 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1 19527 H$<200>, 19528 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1 19529 H$<200>, 19530 use=ncr260vt300an, 19531 ncr260vt300pp|NCR 2900/260 VT300 with PC+ keyboard, 19532 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 19533 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 19534 kend=\E[1~, khome=\E[H, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 19535 rmkx=\E>, smkx=\E=, use=ncr260vt300an, 19536 ncr260vt300wpp|NCR260VT300WPP|NCR 2900/260 VT300 wide mode PC+ keyboard, 19537 cols#132, 19538 cup=\E[%i%p1%d;%p2%dH$<30>, 19539 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1 19540 ;1H\E>$<200>, 19541 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1 19542 ;1H\E>$<200>, 19543 use=ncr260vt300pp, 19544 # This terminfo file contains color capabilities for the Wyse325 emulation of 19545 # the NCR 2900/260C color terminal. Because of the structure of the command 19546 # (escape sequence) used to set color attributes, one of the fore/background 19547 # colors must be preset to a given value. I have set the background color to 19548 # black. The user can change this setup by altering the last section of the 19549 # 'setf' definition. The escape sequence to set color attributes is 19550 # ESC d y <foreground_color> <background_color> 1 19551 # In addition, the background color can be changed through the desk accessories. 19552 # The capability 'op' sets colors to green on black (default combination). 19553 # 19554 # NOTE: The NCR Unix System Administrator's Shell will not function properly 19555 # if the 'pairs' capability is defined. Un-Comment the 'pairs' 19556 # capability and recompile if you wish to have it included. 19557 # 19558 ncr260wy325pp|NCR 2900/260 Wyse 325, 19559 am, bw, km, mc5i, mir, msgr, xon, 19560 colors#16, cols#80, lines#24, ncv#33, nlab#32, 19561 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2, 19562 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r, 19563 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 19564 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 19565 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>, 19566 el=\Et$<5>, home=\036$<5>, ht=^I, hts=\E1, il1=\EE$<5>, 19567 ind=\n$<5>, invis=\EG1, 19568 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9 19569 \Ee7$<100>, 19570 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 19571 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, 19572 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, 19573 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, 19574 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, 19575 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, 19576 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, 19577 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, 19578 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 19579 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, 19580 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 19581 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 19582 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 19583 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 19584 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9 19585 \Ee7$<100>, 19586 setb=\s, 19587 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51} 19588 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54} 19589 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57} 19590 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t 19591 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%= 19592 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>, 19593 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/, 19594 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 19595 use=ncr260vp+sl, 19596 ncr260wy325wpp|NCR 2900/260 Wyse 325 wide mode, 19597 cols#132, 19598 cup=\Ea%i%p1%dR%p2%dC$<30>, 19599 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9 19600 \Ee7$<100>, 19601 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9 19602 \Ee7$<100>, 19603 use=ncr260wy325pp, 19604 # This definition for Wyse 350 supports several attributes. This means 19605 # that it has magic cookies (extra spaces where the attributes begin). 19606 # Some applications do not function well with magic cookies. The System 19607 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 19608 # If supporting various attributes is not vital, 'xmc#1' and the extra 19609 # attributes can be removed. 19610 # Mapping to ASCII character set ('acsc' capability) can also be 19611 # restored if needed. 19612 # In addition, color capabilities have been added to this file. The drawback, 19613 # however, is that the background color has to be black. The foreground colors 19614 # are numbered 0 through 15. 19615 # 19616 # NOTE: The NCR Unix System Administrator's Shell does not function properly 19617 # with the 'pairs' capability defined as below. If you wish to 19618 # have it included, Un-comment it and recompile (using 'tic'). 19619 # 19620 ncr260wy350pp|NCR 2900/260 Wyse 350, 19621 am, bw, km, mc5i, mir, msgr, xon, 19622 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1, 19623 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2, 19624 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, 19625 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 19626 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>, 19627 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, 19628 ed=\Ey$<5>, el=\Et$<5>, home=\036$<10>, ht=^I, hts=\E1, 19629 il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 19630 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9 19631 \Ee7$<100>, 19632 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 19633 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, 19634 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 19635 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 19636 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 19637 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 19638 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 19639 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 19640 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 19641 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 19642 mc0=\EP$<10>, mc4=^T, mc5=^R, 19643 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>, 19644 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 19645 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 19646 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9 19647 \Ee7$<100>, 19648 setb=\s, 19649 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51} 19650 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54} 19651 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97} 19652 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t 19653 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1 19654 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>, 19655 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/, 19656 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 19657 use=ncr260vp+sl, 19658 ncr260wy350wpp|NCR 2900/260 Wyse 350 wide mode, 19659 cols#132, 19660 cup=\Ea%i%p1%dR%p2%dC$<30>, 19661 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9 19662 \Ee7$<200>, 19663 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9 19664 \Ee7$<200>, 19665 use=ncr260wy350pp, 19666 # This definition for Wyse 50+ supports several attributes. This means 19667 # that it has magic cookies (extra spaces where the attributes begin). 19668 # Some applications do not function well with magic cookies. The System 19669 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 19670 # If supporting various attributes is not vital, 'xmc#1' and the extra 19671 # attributes can be removed. 19672 # Mapping to ASCII character set ('acsc' capability) can also be 19673 # restored if needed. 19674 # (ncr260wy50+pp: originally contained commented-out 19675 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr) 19676 ncr260wy50+pp|NCR 2900/260 Wyse 50+, 19677 am, bw, km, mc5i, mir, msgr, xon, 19678 cols#80, lines#24, nlab#32, xmc#1, 19679 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 19680 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, 19681 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 19682 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>, 19683 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, 19684 ed=\EY$<5>, el=\ET$<5>, home=\036$<10>, ht=\011$<5>, 19685 hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 19686 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E" 19687 \Ee4\Ex@\E`9\Ee7$<100>, 19688 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 19689 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, 19690 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 19691 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 19692 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 19693 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 19694 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 19695 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 19696 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 19697 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 19698 mc0=\EP$<10>, mc4=^T, mc5=^R, 19699 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 19700 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 19701 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 19702 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E" 19703 \Ee4\Ex@\E`9\Ee7$<100>, 19704 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, 19705 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, 19706 use=ncr260vp+sl, 19707 ncr260wy50+wpp|NCR 2900/260 Wyse 50+ wide mode, 19708 cols#132, 19709 cup=\Ea%i%p1%dR%p2%dC$<30>, 19710 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E" 19711 \Ee4\Ex@\E`9\Ee7$<200>, 19712 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E" 19713 \Ee4\Ex@\E`9\Ee7$<200>, 19714 use=ncr260wy50+pp, 19715 ncr260wy60pp|NCR 2900/260 Wyse 60, 19716 am, bw, km, mc5i, mir, msgr, xon, 19717 cols#80, lines#24, nlab#32, 19718 acsc=07a?h;j5k3l2m1n8q:t4u9v=w0x6, bel=^G, blink=\EG2, 19719 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, 19720 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 19721 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 19722 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, ed=\Ey$<5>, 19723 el=\Et$<5>, home=\036$<25>, ht=\011$<15>, hts=\E1$<15>, 19724 il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 19725 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E" 19726 \Ee4\Ex@\E`9\Ee7$<100>, 19727 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 19728 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, 19729 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, 19730 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 19731 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 19732 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, 19733 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, 19734 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, 19735 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, 19736 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 19737 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 19738 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>, 19739 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 19740 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 19741 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E" 19742 \Ee4\Ex@\E`9\Ee7$<100>, 19743 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/, 19744 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>, 19745 use=ncr260vp+sl, 19746 ncr260wy60wpp|NCR 2900/260 Wyse 60 wide mode, 19747 cols#132, 19748 cup=\Ea%i%p1%dR%p2%dC$<30>, 19749 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E" 19750 \Ee4\Ex@\E`9\Ee7$<100>, 19751 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E" 19752 \Ee4\Ex@\E`9\Ee7$<100>, 19753 use=ncr260wy60pp, 19754 ncr160vppp|NCR 2900/160 viewpoint, 19755 use=ncr260vppp, 19756 ncr160vpwpp|NCR 2900/160 viewpoint wide mode, 19757 use=ncr260vpwpp, 19758 ncr160vt100an|NCR 2900/160 VT100 with ANSI keyboard, 19759 use=ncr260vt100an, 19760 ncr160vt100pp|NCR 2900/160 VT100 with PC+ keyboard, 19761 use=ncr260vt100pp, 19762 ncr160vt100wan|NCR 2900/160 VT100 wide mode ANSI keyboard, 19763 use=ncr260vt100wan, 19764 ncr160vt100wpp|NCR 2900/160 VT100 wide mode PC+ keyboard, 19765 use=ncr260vt100wpp, 19766 ncr160vt200an|NCR 2900/160 VT200 with ANSI keyboard, 19767 use=ncr260vt200an, 19768 ncr160vt200pp|NCR 2900/160 VT200 with PC+ keyboard, 19769 use=ncr260vt200pp, 19770 ncr160vt200wan|NCR 2900/160 VT200 wide mode ANSI keyboard, 19771 use=ncr260vt200wan, 19772 ncr160vt200wpp|NCR 2900/160 VT200 wide mode PC+ keyboard, 19773 use=ncr260vt200wpp, 19774 ncr160vt300an|NCR 2900/160 VT300 with ANSI keyboard, 19775 use=ncr260vt300an, 19776 ncr160vt300pp|NCR 2900/160 VT300 with PC+ keyboard, 19777 use=ncr260vt300pp, 19778 ncr160vt300wan|NCR 2900/160 VT300 wide mode ANSI keyboard, 19779 use=ncr260vt300wan, 19780 ncr160vt300wpp|NCR 2900/160 VT300 wide mode PC+ keyboard, 19781 use=ncr260vt300wpp, 19782 ncr160wy50+pp|NCR 2900/160 Wyse 50+, 19783 use=ncr260wy50+pp, 19784 ncr160wy50+wpp|NCR 2900/160 Wyse 50+ wide mode, 19785 use=ncr260wy50+wpp, 19786 ncr160wy60pp|NCR 2900/160 Wyse 60, 19787 use=ncr260wy60pp, 19788 ncr160wy60wpp|NCR 2900/160 Wyse 60 wide mode, 19789 use=ncr260wy60wpp, 19790 ncrvt100an|ncrvt100pp|NCR VT100 for the 2900 terminal, 19791 am, hs, mc5i, mir, msgr, xon, 19792 cols#80, it#8, lines#24, nlab#32, 19793 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~, 19794 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>, 19795 clear=\E[2J\E[1;1H$<300>, cr=\r, 19796 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>, 19797 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>, 19798 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>, 19799 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>, 19800 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>, 19801 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>, 19802 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>, 19803 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>, 19804 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>, 19805 ind=\ED, 19806 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>, 19807 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D, 19808 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP, 19809 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, 19810 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>, 19811 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>, 19812 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E( 19813 B\E)0\E%/0n\E[P\031$<200>, 19814 sc=\E7, 19815 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1 19816 %p3%|%t;7%;%?%p4%t;5%;m$<120>, 19817 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>, 19818 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>, 19819 tsl=\E[>+1$<70>, use=decid+cpr, 19820 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, 19821 cols#132, 19822 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>, 19823 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B 19824 \E)0\E%/0n\E[P\031$<200>, 19825 use=ncrvt100an, 19826 # 19827 # Vendor-supplied NCR termcaps end here 19828 19829 # NCR7900 DIP switches: 19830 # 19831 # Switch A: 19832 # 1-4 - Baud Rate 19833 # 5 - Parity (Odd/Even) 19834 # 6 - Don't Send or Do Send Spaces 19835 # 7 - Parity Enable 19836 # 8 - Stop Bits (One/Two) 19837 # 19838 # Switch B: 19839 # 1 - Upper/Lower Shift 19840 # 2 - Typewriter Shift 19841 # 3 - Half Duplex / Full Duplex 19842 # 4 - Light/Dark Background 19843 # 5-6 - Carriage Return Without / With Line Feed 19844 # 7 - Extended Mode 19845 # 8 - Suppress Keyboard Display 19846 # 19847 # Switch C: 19848 # 1 - End of line entry disabled/enabled 19849 # 2 - Conversational mode / (Local?) Mode 19850 # 3 - Control characters displayed / not displayed 19851 # 4 - (2-wire?) / 4-wire communications 19852 # 5 - RTS on and off for each character 19853 # 6 - (50Hz?) / 60 Hz 19854 # 7 - Exit after level zero diagnostics 19855 # 8 - RS-232 interface 19856 # 19857 # Switch D: 19858 # 1 - Reverse Channel (yes / no) 19859 # 2 - Manual answer (no / yes) 19860 # 3-4 - Cursor appearance 19861 # 5 - Communication Rate 19862 # 6 - Enable / Disable EXT turnoff 19863 # 7 - Enable / Disable CR turnoff 19864 # 8 - Enable / Disable backspace 19865 # 19866 # Since each attribute parameter is 0 or 1, we shift each attribute (standout, 19867 # reverse, blink, dim, and underline) the appropriate number of bits (by 19868 # multiplying the 0 or 1 by a correct factor to shift) so the bias character, 19869 # '@' is (effectively) "or"ed with each attribute to generate the proper third 19870 # character in the <ESC>0 sequence. The <sgr> string implements the following 19871 # equation: 19872 # 19873 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => 19874 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) 19875 # 19876 # Where: P1 <==> Standout attribute parameter 19877 # P2 <==> Underline attribute parameter 19878 # P3 <==> Reverse attribute parameter 19879 # P4 <==> Blink attribute parameter 19880 # P5 <==> Dim attribute parameter 19881 # From <root (at] goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. 19882 ncr7900i|ncr7900|n7900|NCR 7900 model 1, 19883 am, bw, ul, 19884 cols#80, lines#24, xmc#1, 19885 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F, 19886 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n, 19887 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F, 19888 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@, 19889 rmul=\E0@, 19890 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17} 19891 %*%+%c, 19892 sgr0=\E0@, smso=\E0Q, smul=\E0`, 19893 ncr7900iv|NCR 7900 model 4, 19894 am, bw, eslok, hs, 19895 cols#80, lines#24, 19896 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, 19897 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1, 19898 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H, 19899 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, 19900 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, 19901 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n, 19902 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, 19903 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D. 19904 # The user can enter a CTRL-B to get out of this locked state. 19905 # In <hpa>, we want to output the character given by the formula: 19906 # ((col / 10) * 16) + (col % 10) where "col" is "p1" 19907 ncr7901|NCR 7901 model, 19908 am, bw, ul, 19909 cols#80, lines#24, 19910 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r, 19911 cub1=^H, cud1=\n, cuf1=^F, 19912 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A, 19913 ed=\Ek, el=\EK, 19914 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n, 19915 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, 19916 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O, 19917 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17} 19918 %*%+%c\016, 19919 sgr0=^O, smso=\E0Q\016, smul=\E0`\016, 19920 vpa=\013%p1%{64}%+%c, 19921 19922 # Newbury Data Recording Limited (Newbury Data) 19923 # 19924 # Have been manufacturing and reselling various peripherals for a long time 19925 # They don't make terminals anymore, but are still in business (in 2007). 19926 # Their e-mail address is at ndsales (at] newburydata.co.uk 19927 # and their post address is: 19928 # 19929 # Newbury Data Recording Ltd, 19930 # Premier Park, Road One, 19931 # Winsford, Cheshire, CW7 3PT 19932 # 19933 # Their technical support is still good, they sent me for free a printed copy 19934 # of the 9500 user manual and I got it just 1 week after I first contacted them 19935 # (in 2005)! 19936 19937 # NDR 9500 19938 # Manufactured in the early/mid eighties, behaves almost the same as a 19939 # TeleVideo 950. Take a 950, change its cabinet for a more 80s-ish one (but 19940 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP 19941 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC ! 19942 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is 19943 # recognized: if you type in "ESC !", the next (third) character is not 19944 # echoed, showing that the terminal was actually waiting for a parameter! 19945 ndr9500|nd9500|Newbury Data 9500, 19946 am, bw, hs, mc5i, mir, msgr, ul, xon, 19947 cols#80, lines#24, wsl#79, 19948 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0, 19949 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L, 19950 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 19951 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 19952 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1, 19953 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO, 19954 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z, 19955 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 19956 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 19957 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, 19958 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, 19959 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 19960 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 19961 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_, 19962 pfloc=\E|%{48}%p1%+%c2%p2%s\031, 19963 pfx=\E|%{48}%p1%+%c1%p2%s\031, prot=\E), ri=\Ej, 19964 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N, 19965 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;, 19966 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O, 19967 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H, 19968 19969 ndr9500-nl|NDR 9500 with no status line, 19970 hs@, 19971 wsl@, 19972 dsl@, fsl@, tsl@, use=ndr9500, 19973 19974 ndr9500-25|NDR 9500 with 25th line enabled, 19975 lines#25, use=ndr9500, 19976 19977 ndr9500-25-nl|NDR 9500 with 25 lines and no status line, 19978 lines#25, use=ndr9500-nl, 19979 19980 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink), 19981 msgr@, 19982 xmc#1, 19983 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, 19984 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1} 19985 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c, 19986 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500, 19987 19988 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies, 19989 lines#25, use=ndr9500-mc, 19990 19991 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line, 19992 hs@, 19993 wsl@, 19994 dsl@, fsl@, tsl@, use=ndr9500-mc, 19995 19996 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line, 19997 lines#25, use=ndr9500-mc-nl, 19998 19999 #### Perkin-Elmer (Owl) 20000 # 20001 # These are official terminfo entries from within Perkin-Elmer. 20002 # 20003 20004 bantam|pe550|pe6100|Perkin Elmer 550, 20005 OTbs, 20006 cols#80, lines#24, 20007 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 20008 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 20009 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA, 20010 fox|pe1100|Perkin Elmer 1100, 20011 OTbs, am, 20012 cols#80, lines#24, 20013 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n, 20014 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 20015 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003, 20016 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3, 20017 owl|pe1200|Perkin Elmer 1200, 20018 OTbs, am, in, 20019 cols#80, lines#24, 20020 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n, 20021 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 20022 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 20023 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 20024 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>, 20025 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 20026 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 20027 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3, 20028 pe1251|pe6300|pe6312|Perkin Elmer 1251, 20029 am, 20030 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1, 20031 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC, 20032 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 20033 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n, 20034 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE, 20035 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3, 20036 # (pe7000m: this had 20037 # rmul=\E!\0, smul=\E!\040, 20038 # which is probably wrong, it collides with kf0 20039 pe7000m|Perkin Elmer 7000 series monochrome monitor, 20040 am, 20041 cols#80, lines#24, 20042 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB, 20043 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 20044 ed=\EJ, el=\EI, home=\EH, ind=\n, 20045 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V, 20046 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A, 20047 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E, 20048 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S, 20049 ll=\ES7\s, ri=\ER, 20050 pe7000c|Perkin Elmer 7000 series colour monitor, 20051 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0, 20052 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m, 20053 20054 #### Sperry Univac 20055 # 20056 # Sperry Univac has merged with Burroughs to form Unisys. 20057 # 20058 20059 # This entry is for the Sperry UTS30 terminal running the TTY 20060 # utility under control of CP/M Plus 1R1. The functionality 20061 # provided is comparable to the DEC VT100. 20062 # (uts30: I added <rmam>/<smam> based on the init string -- esr) 20063 uts30|Sperry UTS30 with cp/m@1R1, 20064 am, bw, hs, 20065 cols#80, lines#24, wsl#40, 20066 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20067 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L, 20068 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, 20069 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 20070 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20071 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM, 20072 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H, 20073 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN, 20074 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H, 20075 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H, 20076 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI, 20077 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m, 20078 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 20079 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m, 20080 smul=\E[4m, tsl=\E], uc=\EPB, 20081 20082 #### Tandem 20083 # 20084 # Tandem builds these things for use with its line of fault-tolerant 20085 # transaction-processing computers. They aren't generally available 20086 # on the merchant market, and so are fairly uncommon. 20087 # 20088 20089 tandem6510|adm3a repackaged by Tandem, 20090 use=adm3a, 20091 20092 # A funny series of terminal that TANDEM uses. The actual model numbers 20093 # have a fourth digit after 653 that designates minor variants. These are 20094 # natively block-mode and rather ugly, but they have a character mode which 20095 # this doubtless(?) exploits. There is a 6520 that is slightly dumber. 20096 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also, 20097 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr) 20098 tandem653|t653x|Tandem 653x multipage terminal, 20099 OTbs, am, da, db, hs, 20100 cols#80, lines#24, wsl#64, xmc#1, 20101 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC, 20102 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r, 20103 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s, 20104 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo, 20105 20106 #### Tandy/Radio Shack 20107 # 20108 # Tandy has a line of VDTs distinct from its microcomputers. 20109 # 20110 20111 dmterm|deskmate terminal, 20112 am, bw, 20113 cols#80, lines#24, 20114 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H, 20115 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 20116 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, 20117 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB, 20118 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4, 20119 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0, 20120 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, 20121 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@, 20122 use=adm+sgr, 20123 dt100|dt-100|Tandy DT-100 terminal, 20124 xon, 20125 cols#80, lines#24, xmc#1, 20126 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J, 20127 cr=\r, csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, 20128 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, 20129 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 20130 ich1=\E[@, il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, 20131 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, 20132 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, 20133 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H, 20134 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5, 20135 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, 20136 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 20137 use=vt220+cvis, 20138 dt100w|dt-100w|Tandy DT-100 terminal (wide mode), 20139 cols#132, use=dt100, 20140 dt110|Tandy DT-110 emulating ANSI, 20141 xon, 20142 cols#80, lines#24, 20143 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J, 20144 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, 20145 cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, 20146 dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, 20147 home=\E[H, ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, 20148 is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 20149 kcuu1=\E[A, kend=\E[K, kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, 20150 kf3=\E[3~, kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, 20151 kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, knp=\E[26~, 20152 kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, 20153 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, 20154 rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 20155 use=vt220+cvis, 20156 pt210|TRS-80 PT-210 printing terminal, 20157 hc, os, 20158 cols#80, 20159 bel=^G, cr=\r, cud1=\n, ind=\n, 20160 20161 #### Tektronix (tek) 20162 # 20163 # Tektronix tubes are graphics terminals. Most of them use modified 20164 # oscilloscope technology incorporating a long-persistence green phosphor, 20165 # and support vector graphics on a main screen with an attached "dialogue 20166 # area" for interactive text. 20167 # 20168 20169 tek|tek4012|Tektronix 4012, 20170 OTbs, os, 20171 cols#75, lines#35, 20172 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n, 20173 ff=\014$<1000>, is2=\E^O, 20174 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 20175 tek4013|Tektronix 4013, 20176 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012, 20177 tek4014|Tektronix 4014, 20178 cols#81, lines#38, 20179 is2=\E\017\E9, use=tek4012, 20180 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 20181 tek4015|Tektronix 4015, 20182 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014, 20183 tek4014-sm|Tektronix 4014 in small font, 20184 cols#121, lines#58, 20185 is2=\E\017\E:, use=tek4014, 20186 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 20187 tek4015-sm|Tektronix 4015 in small font, 20188 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm, 20189 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay> 20190 # 20191 # You need to have "stty nl2" in effect. Some versions of tset(1) know 20192 # how to set it for you. 20193 # 20194 # It's got the Magic Cookie problem around stand-out mode. If you can't 20195 # live with Magic Cookie, remove the :so: and :se: fields and do without 20196 # reverse video. If you like reverse video stand-out mode but don't want 20197 # it to flash, change the letter 'H' to 'P' in the :so: field. 20198 tek4023|Tektronix 4023, 20199 OTbs, am, 20200 OTdN#4, cols#80, lines#24, vt#4, xmc#1, 20201 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n, 20202 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, 20203 rmso=^_@, smso=^_P, 20204 # It is recommended that you run the 4025 at 4800 baud or less; 20205 # various bugs in the terminal appear at 9600. It wedges at the 20206 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed 20207 # on keyboard don't work. You have to hit BREAK twice to get 20208 # one break at any speed - this is a documented feature. 20209 # Can't use cursor motion because it's memory relative, and 20210 # because it only works in the workspace, not the monitor. 20211 # Same for home. Likewise, standout only works in the workspace. 20212 # 20213 # <el> was commented out since vi and rogue seem to work better 20214 # simulating it with lots of spaces! 20215 # 20216 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U 20217 # and didn't seem necessary. 20218 # 20219 tek4024|tek4025|tek4027|Tektronix 4024/4025/4027, 20220 OTbs, am, da, db, 20221 cols#80, it#8, lines#34, lm#0, 20222 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r, 20223 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r, 20224 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r, 20225 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r, 20226 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006, 20227 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010, 20228 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r, 20229 ind=^F\n, 20230 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 20231 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r 20232 \037lea\sf5\r, 20233 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/ 20234 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r, 20235 tek4025-17|Tektronix 4025 17 line window, 20236 lines#17, use=tek4025, 20237 tek4025-17-ws|Tektronix 4025 17 line window in workspace, 20238 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73 20239 \r\037wor\s17\r\037mon\s17\r, 20240 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r, 20241 smso=\037att e\r, use=tek4025-17, 20242 tek4025-ex|tek4027-ex|Tektronix 4025/4027 w/!, 20243 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r, 20244 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 20245 # Tektronix 4025a 20246 # From: Doug Gwyn <gwyn (at] brl-smoke.ARPA> 20247 # The following status modes are assumed for normal operation (replace the 20248 # initial "!" by whatever the current command character is): 20249 # !COM 29 # NOTE: changes command character to GS (^]) 20250 # ^]DUP 20251 # ^]ECH R 20252 # ^]EOL 20253 # ^]RSS T 20254 # ^]SNO N 20255 # ^]STO 9 17 25 33 41 49 57 65 73 20256 # Other modes may be set according to communication requirements. 20257 # If the command character is inadvertently changed, termcap can't restore it. 20258 # Insert-character cannot be made to work on both top and bottom rows. 20259 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas. 20260 # There also seems to be a problem with vertical motion, perhaps involving 20261 # delete/insert-line, following a typed carriage return. This terminal sucks. 20262 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 20263 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't 20264 # work any more. -- esr) 20265 tek4025a|Tektronix 4025A, 20266 OTbs, OTpt, am, bw, da, db, xon, 20267 cols#80, it#8, lines#34, 20268 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^], 20269 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;, 20270 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;, 20271 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;, 20272 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;, 20273 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I, 20274 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;, 20275 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle 20276 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn 20277 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25 20278 \s33\s41\s49\s57\s65\s73\035wor\s0;, 20279 tbc=\035sto;, 20280 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 20281 # Here's the command file that I use to get rogue to work on the 4025. 20282 # It should work with any program using the old curses (e.g. it better 20283 # not try to scroll, or cursor addressing won't work. Also, you can't 20284 # see the cursor.) 20285 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) 20286 tek4025-cr|Tektronix 4025 for curses and rogue, 20287 OTbs, am, 20288 cols#80, it#8, lines#33, 20289 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;, 20290 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n, 20291 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 20292 rmcup=\037wor 0, smcup=\037wor 33h, 20293 # next two lines commented out since curses only allows 128 chars, sigh. 20294 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ 20295 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: 20296 tek4025ex|4025ex|4027ex|Tektronix 4025 w/!, 20297 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73 20298 \r, 20299 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 20300 tek4105|Tektronix 4105, 20301 OTbs, am, mir, msgr, ul, xenl, xt, 20302 cols#79, it#8, lines#29, 20303 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z, 20304 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C, 20305 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P, 20306 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 20307 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m, 20308 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, 20309 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T, 20310 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m, 20311 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m, 20312 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 20313 smul=\E[=5;<2m, tbc=\E[1g, 20314 20315 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr) 20316 tek4105-30|Tektronix 4015 emulating 30 line VT100, 20317 am, mir, msgr, xenl, xon, 20318 cols#80, it#8, lines#30, vt#3, 20319 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20320 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 20321 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 20322 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 20323 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 20324 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 20325 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 20326 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, 20327 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 20328 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 20329 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 20330 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 20331 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5 20332 %;m%?%p9%t\016%e\017%;$<2>, 20333 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 20334 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 20335 use=vt100+fnkeys, 20336 20337 # Tektronix 4105 from BRL 20338 # The following setup modes are assumed for normal operation: 20339 # CODE ansi CRLF no DABUFFER 141 20340 # DAENABLE yes DALINES 30 DAMODE replace 20341 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30 20342 # FLAGGING input INSERTREPLACE replace LFCR no 20343 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B 20344 # SELECTCHARSET G1 0 TABS -2 20345 # Other setup modes may be set for operator convenience or communication 20346 # requirements; I recommend 20347 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 20348 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 20349 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 20350 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1 20351 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 20352 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132 20353 # XMTDELAY 0 20354 # and factory color maps. After setting these modes, save them with NVSAVE. No 20355 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 20356 # "IC" cannot be used in combination with "im" & "ei". 20357 # "tek4105a" is just a guess: 20358 tek4105a|Tektronix 4105 (BRL), 20359 OTbs, OTpt, msgr, xon, 20360 OTkn#8, cols#80, it#8, lines#30, vt#3, 20361 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 20362 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 20363 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr, 20364 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 20365 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20366 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 20367 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 20368 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 20369 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H, 20370 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA, 20371 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR, 20372 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8, 20373 ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 20374 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>, 20375 rmso=\E[m, rmul=\E[m, 20376 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40 20377 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l 20378 \E[?7;8h\E[r\E[m\E>, 20379 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 20380 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 20381 use=ecma+index, 20382 20383 # 20384 # Tektronix 4106/4107/4109 from BRL 20385 # The following setup modes are assumed for normal operation: 20386 # CODE ansi COLUMNMODE 80 CRLF no 20387 # DABUFFER 141 DAENABLE yes DALINES 32 20388 # DAMODE replace DAVISIBILITY yes ECHO no 20389 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace 20390 # LFCR no LOCKKEYBOARD no ORIGINMODE relative 20391 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0 20392 # TABS -2 20393 # Other setup modes may be set for operator convenience or communication 20394 # requirements; I recommend 20395 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 20396 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 20397 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 20398 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3 20399 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 20400 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132 20401 # XMTDELAY 0 20402 # and factory color maps. After setting these modes, save them with NVSAVE. No 20403 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 20404 # "IC" cannot be used in combination with "im" & "ei". 20405 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, 20406 msgr, xon, 20407 cols#80, it#8, lines#32, vt#3, 20408 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 20409 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 20410 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr, 20411 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 20412 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20413 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 20414 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 20415 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 20416 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H, 20417 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA, 20418 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR, 20419 kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8, 20420 ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 20421 rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>, 20422 rmso=\E[m, rmul=\E[m, 20423 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40 20424 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3 20425 ;5l\E[?7;8h\E[r\E[m\E>, 20426 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 20427 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, 20428 use=ecma+index, 20429 20430 # Refer to: 20431 # TEK Programmer's Reference 20432 # Part No. 070-4893-00 20433 # Product Group 18 20434 # 4107/4109 Computer Display Terminal 20435 # November 1983 20436 # 20437 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code: 20438 # 0 selects Tek mode, i.e., \E%!0 20439 # 1 selects ANSI mode 20440 # 2 selects ANSI edit-mode 20441 # 3 selects VT52 mode 20442 # 20443 # One odd thing about the description (which has been unchanged since the 90s) 20444 # is that the cursor addressing is using VT52 mode, and a few others use the 20445 # VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that 20446 # the developer used Emacs, which misuses cvvis (this description sets VT52 20447 # mode in that capability). 20448 tek4107|tek4109|Tektronix terminals 4107 4109, 20449 OTbs, am, mir, msgr, ul, xenl, xt, 20450 cols#79, it#8, lines#29, 20451 bel=^G, blink=\E%!1\E[5m$<2>\E%!0, 20452 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r, 20453 cub1=^H, cud1=\n, cuf1=\EC, 20454 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3, 20455 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n, 20456 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 20457 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI, 20458 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0, 20459 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%; 20460 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0, 20461 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0, 20462 smul=\E%!1\E[4m$<2>\E%!0, 20463 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; 20464 # see the note attached to tek4207. 20465 tek4207-s|Tektronix 4207 with sysline but no memory, 20466 eslok, hs, 20467 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, 20468 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8 20469 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 20470 is2=\E7\E[?6l\E[2K\E[?6h\E8, 20471 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107, 20472 20473 # The 4110 series may be a wonderful graphics series, but they make the 4025 20474 # look good for screen editing. In the dialog area, you can't move the cursor 20475 # off the bottom line. Out of the dialog area, ^K moves it up, but there 20476 # is no way to scroll. 20477 # 20478 # Note that there is a floppy for free from Tek that makes the 20479 # 4112 emulate the VT52 (use the VT52 termcap). There is also 20480 # an expected enhancement that will use ANSI standard sequences. 20481 # 20482 # 4112 in non-dialog area pretending to scroll. It really wraps 20483 # but vi is said to work (more or less) in this mode. 20484 # 20485 # 'vi' works reasonably well with this entry. 20486 # 20487 otek4112|o4112-nd|otek4113|otek4114|Tektronix 4110 series (old), 20488 am, 20489 cols#80, lines#34, 20490 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n, 20491 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0, 20492 # The 4112 with the ANSI compatibility enhancement 20493 tek4112|tek4114|Tektronix 4110 series, 20494 OTbs, am, db, 20495 cols#80, lines#34, 20496 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B, 20497 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, 20498 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, 20499 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8, 20500 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 20501 tek4112-nd|Tektronix 4112 not in dialog area, 20502 OTns, 20503 cuu1=^K, use=tek4112, 20504 tek4112-5|Tektronix 4112 in 5 line dialog area, 20505 lines#5, use=tek4112, 20506 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake; 20507 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3. 20508 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were 20509 # previously \0410 and \0411 sequences...I don't *think* they were supposed 20510 # to be 4-digit octal -- esr) 20511 tek4113|Tektronix 4113 color graphics with 5 line dialog area, 20512 OTbs, am, da, eo, 20513 cols#80, lines#5, 20514 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0, 20515 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4 20516 \ERBA4\ERBA4\ERB0, 20517 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, 20518 tek4113-34|Tektronix 4113 color graphics with 34 line dialog area, 20519 lines#34, 20520 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113, 20521 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not 20522 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . 20523 # :vb: needs enough delay to let you see the background color being toggled. 20524 tek4113-nd|Tektronix 4113 color graphics with no dialog area, 20525 OTbs, am, eo, 20526 cols#80, it#8, lines#34, 20527 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K, 20528 cvvis=\ELZ\EKA0, 20529 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4 20530 \ERBA4\ERBA4\ERB0, 20531 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @, 20532 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0, 20533 # This entry is from Tek. Inc. (Brian Biehl) 20534 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr) 20535 otek4115|Tektronix 4115 (old), 20536 OTbs, am, da, db, eo, 20537 cols#80, it#8, lines#34, 20538 cbt=\E[Z, clear=\E[H\E[2J, 20539 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B, 20540 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 20541 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J, 20542 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, 20543 il1=\E[L, 20544 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA? 20545 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, 20546 kbs=^H, ri=\EM, rmam=\E[?7l, 20547 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l, 20548 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 20549 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m, 20550 smul=\E[4m, 20551 tek4115|Tektronix 4115 entry with more ANSI capabilities (new), 20552 am, xon, 20553 cols#80, lines#34, 20554 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 20555 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 20556 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20557 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 20558 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG, 20559 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 20560 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D, 20561 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rev=\E[7m, 20562 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 20563 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1; 20564 %;%?%p7%t8;%;m, 20565 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 20566 vpa=\E[%p1%{1}%+%dd, use=ansi+rep, 20567 # The tek4125 emulates a VT100 incorrectly - the scrolling region 20568 # command is ignored. The following entry replaces <csr> with the needed 20569 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125 20570 # chokes on; and adds a lot of initialization for the Tektronix dialog area. 20571 # Note that this entry uses all 34 lines and sets the cursor color to green. 20572 # Steve Jacobson 8/85 20573 # (tek4125: there were two "\!"s in the is that I replaced with "\E!"; 20574 # commented out, <smir>=\E1 because there's no <rmir> -- esr) 20575 tek4125|Tektronix 4125, 20576 lines#34, 20577 csr@, dl1=\E[1M, il1=\E[1L, 20578 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2 20579 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h 20580 \E[?8h, 20581 rc@, sc@, smkx=\E=, use=vt100+4bsd, 20582 20583 # From: <jcoker@ucbic> 20584 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO 20585 # supplied another, less capable 4107 entry. So we'll use that for 4107 and 20586 # note that if jcoker wasn't confused you may be able to use this one. 20587 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr) 20588 tek4207|Tektronix 4207 graphics terminal with memory, 20589 am, bw, mir, msgr, ul, xenl, 20590 cols#80, it#8, lines#32, 20591 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>, 20592 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20593 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J, 20594 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>, 20595 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5, 20596 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8 20597 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 20598 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H, 20599 rev=\E[7m, ri=\E[T, 20600 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m, 20601 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m, 20602 smul=\E[4m, tbc=\E[1g, 20603 20604 # From: <carolyn (at] dali.berkeley.edu> Thu Oct 31 12:54:27 1985 20605 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!". 20606 # Tab had been given as \E2I,that must be the tab-set capability -- esr) 20607 tek4404|Tektronix 4404, 20608 OTbs, 20609 cols#80, it#8, lines#32, 20610 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 20611 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, 20612 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M, 20613 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L, 20614 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8, 20615 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l, 20616 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m, 20617 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h, 20618 smkx=\E[?1l, smso=\E[7m, smul=\E[4m, 20619 # Some unknown person wrote: 20620 # I added the is string - straight Unix has ESC ; in the login 20621 # string which sets a ct8500 into monitor mode (aka 4025 snoopy 20622 # mode). The is string here cleans up a few things (but not 20623 # everything). 20624 ct8500|Tektronix ct8500, 20625 am, bw, da, db, 20626 cols#80, lines#25, 20627 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n, 20628 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER, 20629 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\, 20630 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s, 20631 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!, 20632 20633 # Tektronix 4205 terminal. 20634 # 20635 # am is not defined because the wrap around occurs not when the char. 20636 # is placed in the 80'th column, but when we are attempting to type 20637 # the 81'st character on the line. (esr: hmm, this is like the VT100 20638 # version of xenl, perhaps am + xenl would work!) 20639 # 20640 # Bold, dim, and standout are simulated by colors and thus not allowed 20641 # with colors. The Tektronix color table is mapped into the RGB color 20642 # table by setf/setb. All colors are reset to factory specifications by oc. 20643 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the 20644 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- 20645 # interval then maps into pre-defined value. 20646 tek4205|Tektronix 4205, 20647 ccc, mir, msgr, 20648 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63, 20649 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20650 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z, 20651 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D, 20652 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 20653 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 20654 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M, 20655 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 20656 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, 20657 ind=\ED, 20658 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3 20659 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%= 20660 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%< 20661 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE 20662 1%e%p2%{875}%<%tE:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%< 20663 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD 20664 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE:%eF4%;%?%p4%{125}%< 20665 %t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8 20666 %e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE:%eF 20667 4%;\E%%!1, 20668 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H, 20669 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA, 20670 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER, 20671 kf7=\ES, 20672 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40 20673 \E%!1, 20674 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=, 20675 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m, 20676 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1 20677 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m 20678 %e1m%;, 20679 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1 20680 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m 20681 %e1m%;, 20682 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N, 20683 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 20684 smul=\E[4m, tbc=\E[1g, 20685 20686 #### Teletype (tty) 20687 # 20688 # These are the hardcopy Teletypes from before AT&T bought the company, 20689 # clattering electromechanical dinosaurs in Bakelite cases that printed on 20690 # pulpy yellow roll paper. If you remember these you go back a ways. 20691 # Teletype-branded VDTs are listed in the AT&T section. 20692 # 20693 # The earliest UNIXes were designed to use these clunkers; nroff and a few 20694 # other programs still default to emitting codes for the Model 37. 20695 # 20696 20697 tty33|tty35|model 33 or 35 teletype, 20698 hc, os, xon, 20699 cols#72, 20700 bel=^G, cr=\r, cud1=\n, ind=\n, 20701 tty37|model 37 teletype, 20702 OTbs, hc, os, xon, 20703 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8, 20704 ind=\n, 20705 20706 # There are known to be at least three flavors of the tty40, all seem more 20707 # like IBM half duplex forms fillers than ASCII terminals. They have lots of 20708 # awful braindamage, such as printing a visible newline indicator after each 20709 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is 20710 # braindamaged but has hope and is described here. The 40-4 is a 3270 20711 # lookalike and beyond hope. The terminal has visible bell but I don't know 20712 # it - it's null here to prevent it from showing the BL character. 20713 # There is an \EG in <nl> because of a bug in old vi (if stty says you have 20714 # a "newline" style terminal (-crmode) vi figures all it needs is nl 20715 # to get crlf, even if <cr> is not ^M.) 20716 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) 20717 tty40|ds40|ds40-2|dataspeed40|Teletype dataspeed 40/2, 20718 OTbs, xon, 20719 cols#80, lines#24, 20720 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB, 20721 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>, 20722 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1, 20723 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^], 20724 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4, 20725 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>, 20726 tty43|model 43 teletype, 20727 OTbs, am, hc, os, xon, 20728 cols#132, 20729 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H, 20730 20731 #### Tymshare 20732 # 20733 20734 # You can add <is2=\E<> to put this 40-column mode, though I can't 20735 # for the life of me think why anyone would want to. 20736 scanset|sc410|sc415|Tymshare Scan Set, 20737 am, bw, msgr, 20738 cols#80, lines#24, 20739 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, 20740 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 20741 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED, 20742 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0, 20743 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N, 20744 20745 #### Volker-Craig (vc) 20746 # 20747 # If you saw a Byte Magazine cover with a terminal on it during the early 20748 # 1980s, it was probably one of these. Carl Helmers liked them because 20749 # they could crank 19.2 and were cheap (that is, he liked them until he tried 20750 # to program one...) 20751 # 20752 20753 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time 20754 # every other linefeed. 20755 vc303|vc103|vc203|Volker-Craig 303, 20756 OTbs, OTns, am, 20757 cols#80, lines#24, 20758 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I, 20759 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I, 20760 kcuu1=^N, ll=\017$<1>W, 20761 vc303a|vc403a|Volker-Craig 303a, 20762 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, 20763 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303, 20764 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) 20765 vc404|Volker-Craig 404, 20766 OTbs, am, 20767 cols#80, lines#24, 20768 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U, 20769 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 20770 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n, 20771 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, 20772 vc404-s|Volker-Craig 404 w/standout mode, 20773 cud1=\n, rmso=^O, smso=^N, use=vc404, 20774 # From: <wolfgang (at] cs.sfu.ca> 20775 # (vc414: merged in cup/dl1/home from an old vc414h-noxon) 20776 vc414|vc414h|Volker-Craig 414H in sane escape mode., 20777 OTbs, am, 20778 cols#80, lines#24, 20779 clear=\E\034$<40>, cud1=\E^K, cuf1=^P, 20780 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3, 20781 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R, 20782 ich1=\E:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, 20783 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, 20784 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2, 20785 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8, 20786 rmso=\E^_, smso=\E^Y, 20787 vc415|Volker-Craig 415, 20788 clear=^L, use=vc404, 20789 20790 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS 20791 # 20792 20793 #### IBM PC and clones 20794 # 20795 20796 # The pcplot IBM-PC terminal emulation program is really messed up. It is 20797 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, 20798 # doesn't support scrolling regions, ignores add line commands, and ignores 20799 # delete line commands. Consequently, the resulting behavior looks like a 20800 # crude adm3a-type terminal. 20801 # Steve Jacobson 8/85 20802 pcplot|pc-plot terminal emulation program, 20803 xenl@, 20804 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd, 20805 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA> 20806 # I've found that my KayPro II, running MDM730, continues to emulate an 20807 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX 20808 # system the following termcap entry works well: 20809 # I have noticed a couple of minor glitches, but nothing I can't work 20810 # around. (I added two capabilities from the BRL entry -- esr) 20811 kaypro|kaypro2|kaypro II, 20812 OTbs, am, 20813 cols#80, lines#24, 20814 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L, 20815 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, 20816 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K, 20817 20818 # From IBM, Thu May 5 19:35:27 1983 20819 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr) 20820 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), 20821 OTbs, am, 20822 cols#80, lines#24, 20823 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\, 20824 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_, 20825 20826 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX, 20827 OTbs, am, bw, eo, hs, km, msgr, ul, 20828 cols#80, it#8, lines#24, 20829 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x 20830 \263, 20831 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r, 20832 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 20833 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20834 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 20835 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B, 20836 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H, 20837 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 20838 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242, 20839 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250, 20840 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H, 20841 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA, 20842 rmso=\E[m, rmul=\E[m, 20843 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 20844 %;%?%p7%t30;40%;m, 20845 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 20846 20847 #### Apple II 20848 # 20849 # Apple II firmware console first, then various 80-column cards and 20850 # terminal emulators. For two cents I'd toss all these in the UFO file 20851 # along with the 40-column apple entries. 20852 # 20853 20854 # From: brsmith (at] umn-cs.cs.umn.edu (Brian R. Smith) via BRL 20855 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a 20856 # function of TIC, not the firmware. 20857 # The clear key on a IIgs will do something like clear-screen, 20858 # depending on what you're in. 20859 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, 20860 OTbs, am, bw, eo, msgr, 20861 cols#80, it#8, lines#24, 20862 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\, 20863 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 20864 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n, 20865 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N, 20866 smso=^O, 20867 # Apple //e with 80-column card, entry from BRL 20868 # The modem interface is permitted to discard LF (maybe DC1), otherwise 20869 # passing characters to the 80-column firmware via COUT (PR#3 assumed). 20870 # Auto-wrap does not work right due to newline scrolling delay, which also 20871 # requires that you set "stty cr2". 20872 # Note: Cursor addressing is only available via the Pascal V1.1 entry, 20873 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by 20874 # using a terminal emulation program instead of the built-in firmware. 20875 apple2e|Apple //e, 20876 bw, msgr, 20877 cols#80, lines#24, 20878 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_, 20879 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, 20880 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K, 20881 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 20882 smso=^O, 20883 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro 20884 # 4.20, with incoming and outgoing terminals both on 0, emulation On. 20885 apple2e-p|Apple //e via Pascal, 20886 cup=\036%p2%{32}%+%c%p1%{32}%+%c, use=apple2e, 20887 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL 20888 # Enable DC3/DC1 flow control with "stty ixon -ixany". 20889 apple-ae|ASCII Express, 20890 OTbs, am, bw, msgr, nxon, xon, 20891 cols#80, it#8, lines#24, 20892 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U, 20893 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 20894 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n, 20895 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 20896 smso=^O, 20897 appleII|Apple II plus, 20898 OTbs, am, 20899 cols#80, it#8, lines#24, 20900 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\, 20901 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6, 20902 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I, 20903 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O, 20904 # Originally by Gary Ford 21NOV83 20905 # From: <ee178aci%sdcc7 (at] SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985 20906 apple-80|Apple II with smarterm 80 col, 20907 OTbs, am, bw, 20908 cols#80, lines#24, 20909 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n, 20910 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, 20911 ed=\013$<10*/>, el=\035$<10/>, home=^Y, 20912 apple-soroc|Apple emulating Soroc 120, 20913 am, 20914 cols#80, lines#24, 20915 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 20916 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 20917 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, 20918 # From Peter Harrison, Computer Graphics Lab, San Francisco 20919 # ucbvax!ucsfmis!harrison .....uucp 20920 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA 20921 # "These two work. If you don't have the inverse video chip for the 20922 # Apple with videx then remove the :so: and :se: fields." 20923 # (apple-videx: this used to be called DaleApple -- esr) 20924 apple-videx|Apple with videx videoterm 80 column board with inverse video, 20925 OTbs, am, xenl, 20926 cols#80, it#8, lines#24, 20927 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\, 20928 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 20929 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y, 20930 rmso=^Z2, sgr0=^Z2, smso=^Z3, 20931 # My system [for reference] : Apple ][+, 64K, Ultraterm display card, 20932 # Apple Cat ][ 212 modem, + more all 20933 # controlled by ASCII Express: Pro. 20934 # From Dave Shaver <isucs1!shaver> 20935 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, 20936 OTbs, am, eo, xt, 20937 cols#80, lines#24, 20938 acsc=, clear=^L, cuf1=^\, 20939 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 20940 flash=^W35^W06, home=^Y, 20941 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, 20942 rmso=^N, smso=^O, 20943 apple-uterm|Ultraterm for Apple micros, 20944 OTbs, am, eo, xt, 20945 cols#80, lines#24, 20946 acsc=, clear=^L, cuf1=^\, 20947 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 20948 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, 20949 # from trwrba!bwong (Bradley W. Wong): 20950 # 20951 # This entry assumes that you are using an apple with the UCSD Pascal 20952 # language card. SYSTEM.MISCINFO is assumed to be the same as that 20953 # supplied with the standard apple except that screenwidth should be set 20954 # using SETUP to 80 columns. Note that the right arrow is not mapped in 20955 # this termcap entry. This is because that key, on the Apple, transmits 20956 # a ^U and would thus preempt the more useful "up" function of vi. 20957 # 20958 # HMH 2/23/81 20959 apple80p|80-column apple with Pascal card, 20960 am, bw, 20961 cols#80, lines#24, 20962 clear=^Y^L, cuf1=^\:, cup=\036%p2%{32}%+%c%p1%{32}%+%c, 20963 cuu1=^_, ed=^K, el=^], home=^Y, kcub1=^H, 20964 # 20965 # Apple II+ equipped with Videx 80 column card 20966 # 20967 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL; 20968 # manually converted by D A Gwyn 20969 # 20970 # DO NOT use any terminal emulation with this data base, it works directly 20971 # with the Videx card. This has been tested with vi 1200 baud and works fine. 20972 # 20973 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back 20974 # 1 screen, while in R2 ^U doesn't. 20975 # For inverse alternate character set add: 20976 # <smacs>=^O:<rmacs>=^N: 20977 # (apple-v: added it#8 -- esr) 20978 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), 20979 am, xenl, 20980 cols#80, it#8, lines#24, 20981 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H, 20982 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, 20983 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, 20984 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_, 20985 khome=^Y, rmso=^Z2, smso=^Z3, 20986 apple-videx3|vapple|Apple II with 80 col card, 20987 OTbs, am, 20988 cols#80, lines#24, 20989 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC, 20990 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex, 20991 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 20992 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#, 20993 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH, 20994 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL 20995 aepro|Apple II+ running ASCII Express Pro--vt52, 20996 OTbs, 20997 cols#80, lines#24, 20998 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC, 20999 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 21000 el=\EK, home=\EH, 21001 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory 21002 apple-vm80|ap-vm80|Apple with viewmax-80, 21003 OTbs, 21004 cols#80, lines#24, 21005 clear=\014$<300/>, cuf1=^\:, 21006 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, 21007 ed=\013$<300/>, el=^], home=\031$<200/>, 21008 21009 #### Apple Lisa & Macintosh 21010 # 21011 21012 # (lisa: changed <cvvis> to <cnorm> -- esr) 21013 lisa|Apple Lisa console display (black on white), 21014 OTbs, am, eo, msgr, 21015 cols#88, it#8, lines#32, 21016 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L, 21017 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C, 21018 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 21019 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 21020 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B, 21021 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 21022 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, 21023 liswb|Apple Lisa console display (white on black), 21024 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, 21025 smso=\E[m, smul=\E[4m, use=lisa, 21026 21027 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL; 21028 # <is2> revised by Ferd Brundick <fsbrn (at] BRL.ARPA> 21029 # 21030 # These entries assume that the 'Auto Wraparound' is enabled. 21031 # Xon-Xoff flow control should also be enabled. 21032 # 21033 # The VT100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab 21034 # settings are in non-volatile memory and don't need to be reset upon login. 21035 # Also setting the number of columns glitches the screen annoyingly. 21036 # You can type "reset" to get them set. 21037 # 21038 lisaterm|Apple Lisa or Lisa/2 running LisaTerm VT100 emulation, 21039 OTbs, OTpt, am, xenl, xon, 21040 OTkn#4, cols#80, it#8, lines#24, vt#3, 21041 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r, 21042 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 21043 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 21044 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 21045 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, 21046 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, 21047 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8, 21048 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 21049 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, 21050 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 21051 tbc=\E[3g, 21052 # Lisaterm in 132 column ("wide") mode. 21053 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, 21054 cols#132, 21055 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm, 21056 # Although MacTerminal has insert/delete line, it is commented out here 21057 # since it is much faster and cleaner to use the "lock scrolling region" 21058 # method of inserting and deleting lines due to the MacTerminal implementation. 21059 # Also, the "Insert/delete ch" strings have an extra character appended to them 21060 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not 21061 # supported by MacTerminal. 21062 mac|macintosh|Macintosh with MacTerminal, 21063 xenl, 21064 OTdN#30, 21065 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa, 21066 # Lisaterm in 132 column ("wide") mode. 21067 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode, 21068 cols#132, use=mac, 21069 21070 #### Radio Shack/Tandy 21071 # 21072 21073 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". 21074 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) 21075 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 21076 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, 21077 OTbs, am, 21078 cols#80, it#8, lines#24, 21079 bel=^G, blink=^_", bold=\E:^A, civis=^E\s, 21080 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F, 21081 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, 21082 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n, 21083 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#, 21084 sgr0=\037!\E:\0, smso=^_\s, smul=^_", 21085 # (trs2: removed obsolete ":nl=^_:" -- esr) 21086 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, 21087 OTbs, am, msgr, 21088 cols#80, it#8, lines#24, 21089 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^], 21090 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B, 21091 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\, 21092 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, 21093 # From: Kevin Braunsdorf <ksb (at] mentor.cc.purdue.edu> 21094 # (This had extension capabilities 21095 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ 21096 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: 21097 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr) 21098 trs16|trs-80 model 16 console, 21099 OTbs, am, 21100 cols#80, it#8, lines#24, 21101 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L, 21102 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 21103 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 21104 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 21105 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 21106 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, 21107 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, 21108 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, 21109 smacs=\ERG, smso=\ERD, 21110 21111 #### Commodore Business Machines 21112 # 21113 # Formerly located in West Chester, PA; went spectacularly bust in 1994 21114 # after years of shaky engineering and egregious mismanagement. Made one 21115 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, 21116 # C-128, VIC-20). The C-64 is said to have been the most popular machine 21117 # ever (most units sold); they can still be found gathering dust in closets 21118 # everywhere. 21119 # 21120 21121 # From: Kent Polk <kent (at] swrinde.nde.swri.edu>, 30 May 90 21122 # Added a few more entries, converted caret-type control sequence (^x) entries 21123 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences. 21124 # Corrections by Ty Sarna <tsarna (at] endicor.com>, Sat Feb 28 18:55:15 1998 21125 # 21126 # :as:, :ae: Support for alternate character sets. 21127 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. 21128 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) 21129 # This one appears to fix a problem I always had with a line ending 21130 # at 'width+1' (I think) followed by a blank line in vi. The blank 21131 # line tended to disappear and reappear depending on how the screen 21132 # was refreshed. Note that this is probably needed only if you use 21133 # something like a Dnet Fterm with the window sized to some peculiar 21134 # dimension larger than 80 columns. 21135 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' 21136 # (amiga: removed obsolete :kn#10:, 21137 # also added empty <acsc> to suppress a warning --esr) 21138 amiga|Amiga ANSI, 21139 OTbs, am, bw, xenl, 21140 cols#80, lines#24, 21141 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z, 21142 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD, 21143 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 21144 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 21145 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 21146 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 21147 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 21148 invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B, 21149 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, 21150 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, 21151 kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O, 21152 rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N, 21153 smso=\E[7m, smul=\E[4m, use=ecma+index, 21154 21155 # From: Hans Verkuil <hans (at] wyst.hobby.nl>, 4 Dec 1995 21156 # (amiga: added empty <acsc> to suppress a warning. 21157 # I'm told this entry screws up badly with AS225, the Amiga 21158 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr) 21159 amiga-h|Hans Verkuil's Amiga ANSI, 21160 OTbs, bw, msgr, 21161 cols#80, lines#24, 21162 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, 21163 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r, 21164 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 21165 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 21166 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 21167 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, 21168 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S, 21169 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H, 21170 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 21171 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~, 21172 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, 21173 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, 21174 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m, 21175 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l, 21176 smso=\2337m, smul=\2334m, 21177 21178 # From: Henning 'Faroul' Peters <Faroul (at] beyond.kn-bremen.de>, 25 Sep 1999 21179 # 21180 # Pavel Fedin added 21181 # Home Shift+Left 21182 # End Shift+Right 21183 # PgUp Shift+Up 21184 # PgDn Shift+Down 21185 amiga-8bit|Amiga ANSI using 8-bit controls, 21186 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 21187 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S, 21188 kpp=\233T, ri=\215, rin@, use=amiga-h, 21189 21190 # From: Ruediger Kuhlmann <terminfo (at] ruediger-kuhlmann.de>, 18 Jul 2000 21191 # requires use of appropriate preferences settings. 21192 amiga-vnc|Amiga using VNC console (black on light gray), 21193 am, da, db, msgr, ndscr, 21194 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100, 21195 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p, 21196 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r, 21197 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 21198 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 21199 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 21200 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 21201 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G, 21202 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, 21203 invis=\E8m, 21204 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 21205 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 21206 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, 21207 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, 21208 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~, 21209 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m, 21210 rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l, 21211 rmso=\E[21m, rmul=\E[24m, rs1=\Ec, 21212 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 21213 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m, 21214 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m, 21215 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h, 21216 smso=\E[1m, smul=\E[4m, use=ecma+index, 21217 21218 # MorphOS on Genesi Pegasos 21219 # By Pavel Fedin <sonic_amiga (at] rambler.ru> 21220 morphos|MorphOS on Genesi Pegasos, 21221 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 21222 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~, 21223 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~, 21224 ri=\215, rin@, use=amiga-h, 21225 21226 # Commodore B-128 microcomputer from Doug Tyrol <det (at] HEL-ACE.ARPA> 21227 # I'm trying to write a termcap for a commodore b-128, and I'm 21228 # having a little trouble. I've had to map most of my control characters 21229 # to something that unix will accept (my delete-char is a ctrl-t, etc), 21230 # and create some functions (like cm), but thats life. 21231 # The problem is with the arrow keys - right, and up work fine, but 21232 # left deletes the previous character and down I just can't figure out. 21233 # Jove knows what I want, but I don't know what it's sending to me (it 21234 # isn't thats bound to next-line in jove). 21235 # Anybody got any ideas? Here's my termcap. 21236 # DAG -- I changed his "^n" entries to "\n"; see if that works. 21237 # 21238 commodore|b-128|Commodore B-128 micro, 21239 am, bw, 21240 OTdN#20, cols#80, lines#24, pb#150, 21241 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n, 21242 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P, 21243 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, 21244 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, 21245 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=, 21246 smir=, 21247 21248 #### North Star 21249 # 21250 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL 21251 northstar|North Star Advantage, 21252 OTbs, 21253 cols#80, lines#24, 21254 clear=\004$<200/>, 21255 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, 21256 el=\016$<200/>, home=\034\032$<200/>, 21257 21258 #### Osborne 21259 # 21260 # Thu Jul 7 03:55:16 1983 21261 # 21262 # As an aside, be careful; it may sound like an anomaly on the 21263 # Osborne, but with the 80-column upgrade, it's too easy to 21264 # enter lines >80 columns! 21265 # 21266 # I've already had several comments... 21267 # The Osborne-1 with the 80-col option is capable of being 21268 # 52, 80, or 104 characters wide; default to 80 for compatibility 21269 # with most systems. 21270 # 21271 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'. 21272 osborne-w|osborne1-w|Osborne I in 104-column mode, 21273 msgr, ul, xt, 21274 cols#104, lines#24, 21275 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 21276 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 21277 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n, 21278 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, 21279 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL 21280 osborne|osborne1|Osborne I in 80-column mode, 21281 OTbs, am, mir, msgr, ul, xhp, 21282 OTdB#4, cols#80, lines#24, 21283 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L, 21284 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 21285 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H, 21286 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E), 21287 rmul=\Em, smir=\EQ, smso=\E(, smul=\El, 21288 # 21289 # Osborne Executive definition from BRL 21290 # Similar to tvi920 21291 # Added by David Milligan and Tom Smith (SMU) 21292 osexec|Osborne executive, 21293 OTbs, am, 21294 OTug#1, cols#80, lines#24, xmc#1, 21295 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 21296 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 21297 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 21298 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, 21299 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 21300 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 21301 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej, 21302 smul=\El, tbc=\E3, 21303 21304 #### Console types for obsolete UNIX clones 21305 # 21306 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088 21307 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix 21308 # were commercial, Minix an educational tool sold in conjunction with a book. 21309 # Memory-segmentation limits and a strong tendency to look like V7 long after 21310 # it was obsolete made all three pretty lame. Venix croaked early. Coherent 21311 # and Minix were ported to 32-bit Intel boxes, only to be run over by a 21312 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix). 21313 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There 21314 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and 21315 # even as single processes under SunOS and the Macintosh OS. 21316 # 21317 21318 # See 21319 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html 21320 minix|minix console (v3), 21321 NQ, 21322 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j 21323 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v 21324 \301w\302x\263y\363z\362{\343|\330}\234~\376, 21325 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 21326 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~, 21327 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~, 21328 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~, 21329 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~, 21330 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~, 21331 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~, 21332 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~, 21333 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~, 21334 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~, 21335 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~, 21336 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 21337 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@, 21338 use=minix-3.0, 21339 21340 minix-3.0|minix console (v3.0), 21341 use=ecma+color, use=minix-1.7, 21342 21343 # See 21344 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html 21345 # This matches the entry provided with minix 1.7.4, with bogus :ri: removed. 21346 minix-1.7|minix console (v1.7), 21347 am, xenl, xon@, 21348 el1=\E[2K, is2=\E[0m, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +, 21349 lf4=Num -, lf5=Num 5, use=minix-1.5, 21350 # Corrected Jan 14, 1997 by Vincent Broman <broman (at] nosc.mil> 21351 minix-old|minix-1.5|minix console (v1.5), 21352 xon, NQ, 21353 cols#80, it#8, lines#25, 21354 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r, 21355 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 21356 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 21357 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 21358 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, 21359 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 21360 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 21361 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, 21362 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m, 21363 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 21364 # The linewrap option can be specified by editing /usr/include/minix/config.h 21365 # before recompiling the minix 1.5 kernel. 21366 minix-old-am|minix console with linewrap, 21367 am, use=minix-old, 21368 21369 pc-minix|minix console on an Intel box, 21370 use=klone+acs, use=minix-3.0, 21371 21372 # According to the Coherent 2.3 manual, the PC console is similar 21373 # to a z19. The differences seem to be (1) 25 lines, (2) no status 21374 # line, (3) standout is broken, (4) ins/del line is broken, (5) 21375 # has blinking and bold. 21376 pc-coherent|pcz19|coherent|IBM PC console running Coherent, 21377 am, mir, 21378 cols#80, it#8, lines#25, 21379 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 21380 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN, 21381 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, 21382 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, 21383 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, 21384 21385 # According to the Venix 1.1 manual, the PC console is similar 21386 # to a DEC VT52. Differences seem to be (1) arrow keys send 21387 # different strings, (2) enhanced standout, (3) added insert/delete line. 21388 # Note in particular that it doesn't have automatic margins. 21389 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they 21390 # not described here because this derives from an old termcap entry. 21391 pc-venix|venix|IBM PC console running Venix, 21392 cols#80, it#8, lines#25, 21393 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 21394 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 21395 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK, 21396 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI, 21397 21398 #### Miscellaneous microcomputer consoles 21399 # 21400 # If you know anything more about any of these, please tell me. 21401 # 21402 21403 # The MAI Basic Four computer was obsolete at the end of the 1980s. 21404 # It may be used as a terminal by putting it in "line" mode as seen on 21405 # one of the status lines. 21406 # Initialization is similar to CIT80. <is2> will set ANSI mode for you. 21407 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so 21408 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I 21409 # used \ED instead. 21410 # From: bf347 (at] lafn.org (David Lawyer), 28 Jun 1997 21411 mai|basic4|MAI Basic Four in ANSI mode, 21412 am, da, db, mir, msgr, 21413 cols#82, it#8, lines#25, 21414 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, 21415 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X, 21416 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, 21417 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, 21418 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED, 21419 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, 21420 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 21421 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 21422 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T, 21423 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, 21424 smir=\E[4h, smso=\E[7m, smul=\E[4m, 21425 # basis from Peter Harrison, Computer Graphics Lab, San Francisco 21426 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA 21427 # 21428 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje (at] nightingale.ms.sub.org> wrote: 21429 # The Basis 108 was a Apple II clone, manufactured by the "Basis 21430 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today, 21431 # about 1,5 km from where I live, but doesn't build own computers any 21432 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was 21433 # equipped with one or two 5.25" disk drives, had a monochrome and colour 21434 # video output for a TV set or a dedicated monitor and several slots for 21435 # Apple II cards. Basis 108 were quite popular at german schools before 21436 # the advent of the IBM PC. They run, for example, the UCSD Pascal 21437 # development system (which I used even in 1993 to program the steering 21438 # and data recording for our school's experimental solar panel :), Apple DOS 21439 # or CP/M. 21440 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) 21441 basis|BASIS108 computer with terminal translation table active, 21442 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, 21443 rmso=\E), sgr0=\E), smso=\E(, use=adm3a, 21444 # luna's BMC terminal emulator 21445 luna|luna68k|LUNA68K Bitmap console, 21446 cols#88, lines#46, use=ansi-mini, 21447 megatek|pegasus workstation terminal emulator, 21448 am, os, 21449 cols#83, lines#60, 21450 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived 21451 # interface (pre-Macintosh by several years) that went nowhere. 21452 xerox820|x820|Xerox 820, 21453 am, 21454 cols#80, lines#24, 21455 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 21456 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X, 21457 home=^^, ind=\n, 21458 21459 #### Videotex and teletext 21460 # 21461 21462 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429) 21463 # \E[?3l 80 columns 21464 # \E[?4l scrolling on 21465 # \E[12h local echo off 21466 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen 21467 # \E)0 G1 DEC set (line graphics) 21468 # 21469 # From: Igor Tamitegama <igor (at] ppp1493-ft.teaser.fr>, 18 Jan 1997 21470 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique, 21471 OTbs, eslok, hs, xenl, 21472 cols#80, it#8, lines#24, wsl#72, xmc#0, 21473 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G, 21474 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J, 21475 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr, 21476 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 21477 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 21478 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 21479 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n, 21480 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>, 21481 is1=\E:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0, 21482 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 21483 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp, 21484 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, 21485 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H, 21486 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, 21487 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 21488 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 21489 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, 21490 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A, 21491 use=ansi+cpr, 21492 21493 # From: Alexandre Montaron <canal (at] mygale.org>, 18 Jun 1998, updated 19 Sep 2016 21494 # 21495 minitel1|minitel 1, 21496 am, bw, eslok, hs, hz, .msgr, G0, 21497 colors#8, cols#40, lines#24, pairs#8, .ncv#16, 21498 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH, 21499 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I, 21500 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K, 21501 dsl=\037@A\030\n, el=^X, 21502 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n, 21503 home=^^, ind=\n, is2=\E;`ZQ\E:iC\E:iE\021, kbs=^SG, 21504 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB, 21505 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c, 21506 rev=\E], ri=^K, rmso=\E\\, 21507 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n 21508 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n 21509 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014 21510 \021, 21511 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0, 21512 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%= 21513 %tC%e%p1%'@'%+%c%;, 21514 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, 21515 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c, 21516 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea, 21517 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{, 21518 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D, 21519 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O, 21520 S0=^N, 21521 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\, 21522 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\, 21523 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\, 21524 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\, 21525 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\, 21526 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\, 21527 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\, 21528 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\, 21529 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\, 21530 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\, 21531 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\, 21532 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\, 21533 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0 21534 \177\,--, 21535 minitel1b|minitel 1-bistandard (in 40cols mode), 21536 mir, 21537 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 21538 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 21539 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L, 21540 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I, 21541 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 21542 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/, 21543 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5, 21544 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9, 21545 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG, 21546 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H, 21547 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition, 21548 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation, 21549 rmir=\E[4l, smir=\E[4h, 21550 u8=\001%[ABCPtuvwxyz0123456789:;<=>?]\004, 21551 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h, 21552 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E:|k, .rmkx=\E;jYA, 21553 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D, 21554 use=minitel1, 21555 # rmkx posait des problemes (logout en sortant de vi). 21556 minitel1b-80|minitel 1-bistandard (standard teleinformatique), 21557 am@, bw@, eslok@, hz@, msgr, 21558 colors@, cols#80, it#8, pairs@, 21559 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n, 21560 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C, 21561 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 21562 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r, 21563 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2, 21564 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7, 21565 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*, 21566 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu, 21567 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn, 21568 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE, 21569 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m, 21570 rmul=\E[24m, 21571 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[ 21572 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M 21573 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2 21574 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[ 21575 2M\E[H\E[J\E[m, 21576 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@, 21577 smso=\E[7m, smul=\E[4m, 21578 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga 21579 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011 21580 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011 21581 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011 21582 \011%;%;, 21583 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg, 21584 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec, 21585 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1 21586 ;%;m, 21587 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032, 21588 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\, 21589 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\, 21590 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\, 21591 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\, 21592 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\, 21593 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\, 21594 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\, 21595 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\, 21596 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y 21597 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C, 21598 use=minitel1b, 21599 21600 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ..., 21601 colors@, pairs@, 21602 bold=\EG, clear=^L\EB, 21603 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB, 21604 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@, 21605 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;, 21606 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@, 21607 use=minitel1, 21608 21609 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ..., 21610 msgr, 21611 colors@, pairs@, 21612 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, 21613 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED, 21614 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r, 21615 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r, 21616 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@, 21617 setf@, 21618 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;, 21619 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB, 21620 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@, 21621 .u8=\001Cu|\004r, use=minitel1b, 21622 21623 # Note: 21624 # 21625 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols : 21626 # 21627 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1), 21628 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6), 21629 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12). 21630 # 21631 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15), 21632 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18), 21633 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21), 21634 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24). 21635 # 21636 # Fonctionne par exemple avec Midnight Commander (mc). 21637 21638 minitel2-80|minitel 2 (80cols) avec filets VT100 (DEC), 21639 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, 21640 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR, 21641 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, 21642 S0=\E)0\016, 21643 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261 21644 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276 21645 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\, 21646 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\, 21647 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E( 21648 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\, 21649 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\, 21650 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\, 21651 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i 21652 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\, 21653 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u 21654 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m 21655 \,+k\,.l\,0\177\,-j, 21656 use=minitel12-80, 21657 21658 minitel12-80|minitel 12 (80cols), 21659 G0, 21660 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH, 21661 u7=\E[6n, 21662 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0 21663 \177, 21664 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c, 21665 .smacs=^N, 21666 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177, 21667 E0=^O, S0=\E)3\016, 21668 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261 21669 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A 21670 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E 21671 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D 21672 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U 21673 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\, 21674 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E( 21675 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i 21676 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\, 21677 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L 21678 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0 21679 \,\\\,m\,+k\,.l\,0\177\,-j, 21680 use=minitel1b-80, 21681 21682 # 21683 # Add these in your ~/.screenrc for inputting some special glyphs like french 21684 # accentuated chars in 40 cols mode: 21685 # 21686 # bindkey ^YA digraph '`' # Saisi accent grave. 21687 # bindkey ^YB digraph "'" # Saisi accent aigu. 21688 # bindkey ^YC digraph '^' # Saisi accent circonflexe. 21689 # bindkey ^YH digraph '"' # Saisi accent trema. 21690 # 21691 # bindkey ^Y# stuff \243 # Livre. 21692 # bindkey "^Y\047" stuff \247 # Paragraphe. 21693 # bindkey ^Yj stuff \306 # AE 21694 # bindkey ^Yz stuff \346 # ae 21695 # bindkey ^YKc stuff \347 # c cedille. 21696 # 21697 21698 screen.minitel1|Screen specific for minitel1, 21699 ncv@, 21700 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy 21701 yzz||}}~~, 21702 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@, 21703 rmul@, smul@, u8=\E[?1;2c, use=decid+cpr, 21704 use=xterm+x11mouse, use=screen, 21705 21706 screen.minitel1b|Screen specific for minitel1b, 21707 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, 21708 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8, 21709 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L, 21710 use=screen.minitel1, 21711 21712 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80, 21713 colors@, ncv@, pairs@, 21714 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, 21715 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@, 21716 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m, 21717 use=screen.minitel1b, 21718 21719 screen.minitel1-nb|Screen specific for minitel1-nb, 21720 colors@, ncv@, pairs@, 21721 bold=\E[1m, op@, setab@, setaf@, setb@, setf@, 21722 use=screen.minitel1, 21723 21724 screen.minitel1b-nb|Screen specific for minitel1b-nb, 21725 colors@, ncv@, pairs@, 21726 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@, 21727 use=screen.minitel1b, 21728 21729 # From: Alexandre Montaron, 29 Sep 2016 21730 21731 linux-m1|Linux Minitel 1 "like" Couleurs, 21732 am, bw@, ccc, mir, msgr, xenl, 21733 colors#8, it#8, ncv#16, pairs#64, 21734 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t 21735 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372, 21736 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 21737 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, 21738 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 21739 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 21740 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U, 21741 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`, 21742 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, 21743 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4 21744 %{255}%&%02X, 21745 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G, 21746 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D, 21747 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E\E[A, kent=\EOM, 21748 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 21749 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 21750 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, 21751 kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, 21752 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kil1=\E\E[B, 21753 kmous=\E[M, nel=\EE, oc=\E]R\E]P3FFFF80, op=\E[39;49m, 21754 rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 21755 rmpch=\E[10m, rmso=\E[27m, rs1=\Ec, rs3=\E[37;40m\E[8], 21756 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, 21757 smacs=^N, smam=\E[?7h, smir=\E[4h, smpch=\E[11m, 21758 smso=\E[7m, tbc=\E[3g, vpa=\E[%i%p1%dd, .VN=\E[?5l, 21759 .VR=\E[?5h, .am@, .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, 21760 .rmcup=, .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c, 21761 .smul=\E[4m, 21762 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21763 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21764 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21765 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21766 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21767 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21768 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21769 \n\n\n\n\n\n\n\n\n\n, 21770 use=vt220+pcedit, use=vt220+cvis, use=linux+decid, 21771 21772 # 1. Using double-shapes for VT100 graphical chars (eg: mc). 21773 # 2. Native brown color corrected to good yellow color. 21774 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys. 21775 # 4. Suppressed nonexistent underlined mode (normally as bright). 21776 # 5. ich/ich1 not filled because of non-curses programs. 21777 #-- 21778 # 6. Suppressed nonexistent invisible mode. 21779 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement. 21780 21781 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim), 21782 ccc@, 21783 colors@, ncv@, pairs@, 21784 acsc@, bold=\E[33m, enacs@, initc@, 21785 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A 21786 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF 21787 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c, 21788 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@, 21789 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5 21790 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E] 21791 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c, 21792 use=linux-m1, 21793 21794 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu), 21795 ccc@, 21796 colors@, ncv@, pairs@, 21797 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu 21798 uvvwwxxyyzz{{||}}~~, 21799 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h, 21800 enacs=\E)0, initc@, 21801 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A 21802 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF 21803 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF 21804 F\E[;37m, 21805 oc@, op@, setab=^A, setaf=^A, sgr0=\E[;37m, .setab@, .setaf@, 21806 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5 21807 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E] 21808 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF 21809 \E]PFFFFFFF\E[;37m, 21810 use=linux-m1, 21811 21812 # From: Alexandre Montaron, 27 May 2020 21813 linux-s|Linux console with added status line at bottom, 21814 hs, 21815 clear=\E[255;255H\E[A\E[1J\E[H, csr@, 21816 dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8, 21817 iprog=\sbash\s-c\s'echo\s-ne\s"\E[?6l\E[255H\E[A\E[6n"\s; 21818 \sread\s-d\sR\sTMP\s;\sLINES=`echo\s$TMP\s|\scut\s-f1 21819 \s-d\s";"\s|\scut\s-f2\s-d\s"["`\s;\sstty\srows\s$LINE 21820 S\s;\secho\s-ne\s"\E[;"$LINES"r\E[J"', 21821 rs1=\E]R, tsl=\E7\E[255;%p1%dH, .rc@, .sc@, use=linux, 21822 21823 # Screen entries counterpart : 21824 21825 screen.linux-m1|Linux m1 specific for screen, 21826 ncv@, 21827 kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~, kf14=\E[26~, 21828 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 21829 kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@, smul@, 21830 u8=\E[?1;2c, 21831 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21832 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21833 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21834 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21835 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21836 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21837 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n 21838 \n\n\n\n\n\n\n\n\n\n, 21839 use=decid+cpr, use=xterm+x11mouse, use=screen, 21840 21841 screen.linux-m1b|Linux m1b specific for screen, 21842 colors@, pairs@, 21843 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1, 21844 21845 screen.linux-m2|Linux m2 specific for screen, 21846 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu 21847 uvvwwxxyyzz{{||}}~~, 21848 use=screen.linux-m1b, 21849 21850 # Putty : 21851 21852 putty-m1|Putty Minitel 1 "like" Couleurs, 21853 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 21854 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S, 21855 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm, 21856 use=ecma+index, use=linux-m1, 21857 21858 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir), 21859 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 21860 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S, 21861 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm, 21862 use=ecma+index, use=linux-m1b, 21863 21864 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir), 21865 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{ 21866 {||}}~~, 21867 dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 21868 kf5=\E[15~, rmul=\E[24m, smul=\E[4m, .E3=\E[300S, 21869 use=xterm+alt47, use=putty+screen, use=xterm+sl-twm, 21870 use=ecma+index, use=linux-m2, 21871 21872 putty+screen|PuTTY with screen resizing extensions (building-block), 21873 .WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, 21874 21875 putty-screen|PuTTY with screen resizing extensions, 21876 WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, use=putty, 21877 21878 screen.putty-m1|Putty m1 specific for screen, 21879 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1, 21880 21881 screen.putty-m1b|Putty m1b specific for screen, 21882 colors@, pairs@, 21883 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1, 21884 21885 screen.putty-m2|Putty m2 specific for screen, 21886 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu 21887 uvvwwxxyyzz{{||}}~~, 21888 use=screen.putty-m1b, 21889 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016 21890 # 21891 # He comments: 21892 # viewdata lacks a true cup capability, 21893 # so I achieved it with home and cud1/cuf1 sequences only ! 21894 viewdata|Prestel/Viewdata terminals, 21895 am, bw, eslok, hz, 21896 cols#40, lines#24, 21897 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, 21898 cuf1=^I, 21899 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n 21900 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%; 21901 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011 21902 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011 21903 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%? 21904 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4} 21905 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%& 21906 %t\011%;, 21907 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n, 21908 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K, 21909 21910 viewdata-o|optimized version of Viewdata Prestel/Viewdata terminals, 21911 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%; 21912 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga 21913 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e 21914 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013 21915 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013 21916 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t 21917 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011 21918 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011 21919 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40} 21920 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%; 21921 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga 21922 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga 21923 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;, 21924 .ll=^^^K, use=viewdata, 21925 21926 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/ 21927 21928 viewdata-rv|Prestel/Viewdata terminals with reverse capabilitie (as green), 21929 xmc#1, 21930 rmso=\EG, smso=\EB, use=viewdata-o, 21931 21932 ######## OBSOLETE VDT TYPES 21933 # 21934 # These terminals are *long* dead -- these entries are retained for 21935 # historical interest only. 21936 21937 #### Amtek Business Machines 21938 # 21939 21940 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", 21941 # but these caps were commented out in 8.3; also, removed overridden 21942 # ":do=^J:" -- esr) 21943 abm80|amtek business machines 80, 21944 OTbs, am, bw, 21945 cols#80, lines#24, 21946 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, 21947 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, 21948 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, 21949 21950 #### Bell Labs blit terminals 21951 # 21952 # These were AT&T's official entries. The 5620 FAQ maintained by 21953 # David Breneman <daveb (at] dgtl.com> has this to say: 21954 # 21955 # Actually, in the beginning was the Jerq, and the Jerq was white with a 21956 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq 21957 # was good. But lo, upon the horizon loomed a mighty management-type person 21958 # (known now only by the initials VP) who said, the mighty Jerq must stay 21959 # alone, and could not go forth into the world. So Locanthi and Pike put the 21960 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the 21961 # world. And the Jerq lived the rest of its days in research, but never 21962 # strayed from those paths. 21963 # 21964 # In all seriousness, the Blit was originally known as the Jerq, but when 21965 # it started to be shown outside of the halls of the Bell Labs Research 21966 # organization, the management powers that be decided that the name could 21967 # not remain. So it was renamed to be Blit. This was in late 1981. 21968 # 21969 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630, 21970 # 730, and 730+.) 21971 # 21972 21973 blit|jerq|blit running teletype rom, 21974 am, eo, ul, xon, 21975 cols#87, it#8, lines#72, 21976 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC, 21977 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 21978 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c, 21979 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!, 21980 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED, 21981 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez, 21982 21983 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr) 21984 cbblit|fixterm|blit running columbus code, 21985 cols#88, 21986 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d, 21987 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!, 21988 smul=\EU", use=blit, 21989 21990 oblit|ojerq|first version of blit rom, 21991 am, da, db, eo, mir, ul, xon, 21992 cols#88, it#8, lines#72, 21993 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC, 21994 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO, 21995 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G, 21996 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER, 21997 smir=\EQ, 21998 21999 #### Bolt, Beranek & Newman (bbn) 22000 # 22001 # The BitGraph was a product of the now-defunct BBN Computer Corporation. 22002 # The parent company, best known as the architects of the Internet, is 22003 # still around. 22004 # 22005 # Jeff DelPapa <dp (at] world.std.com> writes: 22006 # The bitgraph was a large white box that contained a monochrome bitmap 22007 # display, and a 68000 to run it. You could download code and run it on 22008 # the cpu, it had 128kb (I think) of memory. I used one in the late 22009 # 70's, sure beat a VT100. It had one strange feature tho -- it used 22010 # the cpu to bitblt pixels to scroll, it took longer than the refresh 22011 # rate, and looked like a rubber sheet stretching, then snapping 22012 # upwards. It had everything the early mac had, except a floppy drive a 22013 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt 22014 # Beranek and Neuman) sold at most a few hundred of them to the real 22015 # world. DOD may have bought more... 22016 # 22017 22018 # Entries for the BitGraph terminals. The problem 22019 # with scrolling in vi can only be fixed by getting BBN to put 22020 # smarter scroll logic in the terminal or changing vi or padding 22021 # scrolls with about 500 ms delay. 22022 # 22023 # I always thought the problem was related to the terminal 22024 # counting newlines in its input buffer before scrolling and 22025 # then moving the screen that much. Then vi comes along and 22026 # paints lines in on the bottom line of the screen, so you get 22027 # this big white gap. 22028 22029 bitgraph|bg2.0nv|bg3.10nv|BBN BitGraph 2.0 or later (normal video), 22030 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 22031 use=bg2.0, 22032 bg2.0rv|bg3.10rv|BBn BitGraph 2.0 (reverse video), 22033 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 22034 use=bg2.0, 22035 bg2.0|bg3.10|BBN BitGraph 2.0 or later (no init), 22036 OTbs, xenl, 22037 cols#85, lines#64, 22038 bel=^G, clear=\E[H\E[J$<150>, cr=\r, 22039 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 22040 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, 22041 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, 22042 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 22043 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, 22044 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7, 22045 sgr0=\E[m, smkx=\E=, smso=\E[7m, 22046 22047 bg1.25rv|BBN BitGraph 1.25 (reverse video), 22048 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 22049 use=bg1.25, 22050 bg1.25nv|BBN BitGraph 1.25 (normal video), 22051 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 22052 use=bg1.25, 22053 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr) 22054 bg1.25|BBN BitGraph 1.25, 22055 cols#85, lines#64, 22056 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B, 22057 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, 22058 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, 22059 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB, 22060 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES, 22061 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l, 22062 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, 22063 smso=\E[7m, 22064 22065 #### Bull (bq, dku, vip) 22066 # 22067 # (Adapted for terminfo; AIX extension capabilities translated -- esr) 22068 22069 #============================================# 22070 # BULL QUESTAR 210 `SDP' terminals emulation # 22071 #============================================# 22072 # 22073 # Description written by R.K.Saunders (Bull Transac) 22074 # 22075 # Modifications written by F. Girard (Bull MTS) 22076 # 19-05-87 V02.00.01 22077 # 17-12-87 V02.00.02 22078 # 15-09-89 V02.00.05 22079 # 22080 # Typical technical selections F1 (modes SDP/ROLL): 22081 # ------------------------------------------------------- 22082 # | 01 02 03 04 05 06 07 08 09 10 | 22083 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 | 22084 # | | 22085 # | 11 12 13 14 15 16 17 18 19 20 | 22086 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 | 22087 # | | 22088 # | 21 22 23 24 25 26 27 28 29 30 | 22089 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 | 22090 # | | 22091 # | 31 32 33 34 35 36 37 38 39 40 | 22092 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 | 22093 # ------------------------------------------------------- 22094 # Typical firmware identification F5 "etat 6": 22095 # P287.02.04b (AZERTY) 22096 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764) 22097 # P298.03.03 (monochrome) or P374.03.02 (colour) 22098 # 22099 # SM SDP mode (VIP command): ^[[?=h 22100 # RIS (erases screen): ^[c 22101 # DMI disable keyboard: ^[` 22102 # SM double rendition mode: ^[[?>h 22103 # RM solicited status mode: ^[[5l 22104 # RM character mode: ^[[>l 22105 # RM echoplex mode: ^[[12l 22106 # RM column tab mode: ^[[18l 22107 # RM forbid SS2 keyboard mode: ^[[?<l 22108 # SM scroll mode: ^[[=h 22109 # FCF enable XON/XOFF: ^[P1s^[\ 22110 # MTL select end msg character: ^[[^Wp 22111 # EMI enable keyboard: ^[b 22112 # RIS retour etat initial: ^[c 22113 # enable FC keypad: ^[[?<h, 22114 # MPW map status line window: ^[PY99:98^[\ 22115 # SCP select status line: ^[[0;98v 22116 # ED erase entire partition: ^[[2J 22117 # SCP select main partition: ^[[v 22118 # SM character insertion mode: ^[[4h 22119 # RM character replacement mode: ^[[4l 22120 # COO cursor on: ^[[r 22121 # COO cursor off: ^[[1r 22122 # SGR dim (turquoise) rev attr: ^[[2;7m 22123 # SGR Data normal attr: ^[[m 22124 # SO Line-graphic mode ON: ^N 22125 # SI Line-graphic mode OFF: ^O 22126 # MC start routing to printer: ^[[5i 22127 # MC stop routing to printer: ^M^[[4i 22128 # 22129 22130 # This entry covers the following terminals: 22131 # dku7102, tws2102, and tws models 2105 to 2112 22132 tws-generic|dku7102|Bull Questar tws terminals, 22133 am, eslok, hs, mir, msgr, xenl, xhp@, xon, 22134 cols#80, it#8, lines#24, wsl#80, 22135 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~, 22136 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J, 22137 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 22138 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 22139 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 22140 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M, 22141 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K, 22142 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL, 22143 il1=\E[L, ind=\n, invis=\E[0;8m, 22144 is1=\E[?=h\Ec\E`\E[?>h\EPY99:98\E\\, 22145 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p, 22146 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D, 22147 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 22148 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027, 22149 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027, 22150 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H, 22151 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i, 22152 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O, 22153 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m, 22154 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N, 22155 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%? 22156 %p7%t;8%;m%?%p9%t\016%e\017%;, 22157 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99:98\E\\, 22158 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 22159 tsl=\EPY99:98\E\\\E[0;98v\E[2;7m, 22160 tws2102-sna|dku7102-sna|Bull Questar tws2102 for SNA, 22161 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v, 22162 use=tws-generic, 22163 tws2103|xdku|Bull Questar tws2103, 22164 ht=^I, use=tws-generic, 22165 tws2103-sna|dku7103-sna|Bull Questar tws2103 for SNA, 22166 ht=^I, use=tws2102-sna, 22167 dku7102-old|Bull Questar 200 DKU7102 (microcode version < 6), 22168 clear=\E[2J\E[H, cup@, dl@, dl1@, 22169 dsl=\EPY99:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m, 22170 il@, il1@, tsl=\EPY99:98\E\\\E[0;98v\E[H\E[2;7m, 22171 use=tws-generic, 22172 dku7202|Bull Questar 200 DKU7202 (colour/character attributes), 22173 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb, 22174 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%; 22175 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 22176 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic, 22177 22178 #=========================================================# 22179 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation # 22180 #=========================================================# 22181 # 22182 # Description written by J. Staerck (BULL SA) 22183 # Copyright (c) 1989 BULL SA 22184 #--------------------------------------------------------------------------- 22185 # This entry is used for terminals with VT320 emulation mode 22186 # and following set-up : 22187 # 8 bit ISO Latin Character Set (ISO 8859-1), 22188 # 7 bit Control Characters, 22189 # 80 columns screen. 22190 # Hereafter are some DEC vt terminals' commands. (valid on VT200 and 300) 22191 # They are used in string capabilities with VT220-320 emulation mode. 22192 # In the following DEC definitions, two kinds of terminfo databases are 22193 # provided : 22194 # 1. the first with Command Sequence Introducer starting with escape 22195 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. 22196 # 2. the second with Command Sequence Introducer starting with escape 22197 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. 22198 # Soft Terminal Reset esc [ ! p 22199 # RIS (erases screen): esc c 22200 # DECKPNM numeric keypad mode: esc > 22201 # DECKPAM applic. keypad mode: esc = 22202 # DECSTBM Scrolling region: esc [ r 22203 # SCS select G0 = US: esc ( B 22204 # SCS select G1 = line-graphic: esc ) 0 22205 # Select 7-bit C1 controls: esc sp F 22206 # Select 8-bit C1 controls: esc sp G 22207 # Select cursor home: esc [ H 22208 # Select erase screen: esc [ J 22209 # SM KAM lock keyboard: esc [ 2 h 22210 # RM KAM unlock keyboard: esc [ 2 l 22211 # SM SRM local echo off: esc [ 1 2 h 22212 # RM SRM local echo on: esc [ 1 2 l 22213 # SM LNM New line : esc [ 2 0 h 22214 # RM LNM return = CR only: esc [ 2 0 l 22215 # SM DECCKM cursor keys mode: esc [ ? 1 h 22216 # RM DECCKM appli. keys mode: esc [ ? 1 l 22217 # SM DECANM ANSI mode on: esc [ ? 2 h 22218 # RM DECANM ANSI mode off: esc [ ? 2 l 22219 # SM DECCOLM 132-column screen: esc [ ? 3 h 22220 # RM DECCOLM 80-column screen: esc [ ? 3 l 22221 # SM DECSCLM Smooth scroll: esc [ ? 4 h 22222 # RM DECSCLM Jump scroll: esc [ ? 4 l 22223 # SM DECSCNM screen light backgr. esc [ ? 5 h 22224 # RM DECSCNM screen dark backgr. esc [ ? 5 l 22225 # SM DECOM move within margins: esc [ ? 6 h 22226 # RM DECOM move outside margins: esc [ ? 6 l 22227 # SM DECAWM auto right margin: esc [ ? 7 h 22228 # RM DECAWM auto right margin: esc [ ? 7 l 22229 # SM DECARM auto repeat: esc [ ? 8 h 22230 # RM DECARM auto repeat: esc [ ? 8 l 22231 # DECSASD Select active main: esc [ 0 $ } 22232 # DECSASD Select active status: esc [ 1 $ } 22233 # DECSSDT Select status none: esc [ 0 $ ~ 22234 # DECSSDT Select status indic.: esc [ 1 $ ~ 22235 # DECSSDT Select status host-wr: esc [ 2 $ ~ 22236 # SM DECTCEM Visible cursor: esc [ ? 2 5 h 22237 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l 22238 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h 22239 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l 22240 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h 22241 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l 22242 # SM DECKBUM clavier informatique esc [ ? 6 8 h 22243 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l 22244 # DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 " p 22245 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p 22246 # or DECSCL VT300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p 22247 # DECSCL VT300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p 22248 # Char. and Line attributes: esc [ Ps ... Ps m 22249 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 22250 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 22251 # 22252 22253 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310 22254 bq300|Bull VT320 ISO Latin 1 80 columns terminal, 22255 am, eo, eslok, hs, km, mir, msgr, xenl, xon, 22256 cols#80, it#8, lines#24, vt#3, wsl#80, 22257 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 22258 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 22259 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 22260 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 22261 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 22262 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 22263 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J, 22264 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 22265 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I, 22266 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 22267 is1=\E[63;1"p\E[2h, 22268 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22269 l, 22270 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy, 22271 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, 22272 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 22273 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 22274 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 22275 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 22276 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[28~, 22277 krdo=\E[29~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE, 22278 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, 22279 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 22280 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, 22281 sc=\E7, 22282 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1 22283 %;m%?%p9%t\E(0%e\E(B%;, 22284 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h, 22285 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m, 22286 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+enq, 22287 use=vt220+vtedit, use=ansi+pp, use=vt220+cvis, 22288 bq300-rv|Bull VT320 reverse 80 columns, 22289 flash=\E[?5l$<50>\E[?5h, 22290 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22291 l, 22292 use=bq300, 22293 bq300-w|Bull VT320 132 columns, 22294 cols#132, wsl#132, 22295 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22296 l, 22297 rs2=\E[?3h, use=bq300, 22298 bq300-w-rv|Bull VT320 reverse mode 132 columns, 22299 cols#132, wsl#132, 22300 flash=\E[?5l$<50>\E[?5h, 22301 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22302 l, 22303 rs2=\E[?3h, use=bq300, 22304 22305 # This entry is used for terminals with VT320 emulation mode 22306 # and following set-up : 22307 # 8 bit ISO Latin Character Set (ISO 8859-1), 22308 # 8 bit Control Characters, (CSI coded as x9B for ESC [) 22309 # 80 columns screen. 22310 # Soft Terminal Reset csi ! p 22311 # RIS (erases screen): esc c 22312 # DECKPNM numeric keypad mode: esc > 22313 # DECKPAM applic. keypad mode: esc = 22314 # DECSTBM Scrolling region: esc [ r 22315 # SCS select G0 = US: esc ( B 22316 # SCS select G1 = line-graphic: esc ) 0 22317 # Select 7-bit C1 controls: esc sp F 22318 # Select 8-bit C1 controls: esc sp G 22319 # Select cursor home: csi H 22320 # Select erase screen: csi J 22321 # SM KAM lock keyboard: csi 2 h 22322 # RM KAM unlock keyboard: csi 2 l 22323 # SM SRM local echo off: csi 1 2 h 22324 # RM SRM local echo on: csi 1 2 l 22325 # SM LNM New line : csi 2 0 h 22326 # RM LNM return = CR only: csi 2 0 l 22327 # SM DECCKM cursor keys mode: csi ? 1 h 22328 # RM DECCKM appli. keys mode: csi ? 1 l 22329 # SM DECANM ANSI mode on: csi ? 2 h 22330 # RM DECANM ANSI mode off: csi ? 2 l 22331 # SM DECCOLM 132-column screen: csi ? 3 h 22332 # RM DECCOLM 80-column screen: csi ? 3 l 22333 # SM DECSCLM Smooth scroll: csi ? 4 h 22334 # RM DECSCLM Jump scroll: csi ? 4 l 22335 # SM DECSCNM screen light backgr. csi ? 5 h 22336 # RM DECSCNM screen dark backgr. csi ? 5 l 22337 # SM DECOM move within margins: csi ? 6 h 22338 # RM DECOM move outside margins: csi ? 6 l 22339 # SM DECAWM auto right margin: csi ? 7 h 22340 # RM DECAWM auto right margin: csi ? 7 l 22341 # SM DECARM auto repeat: csi ? 8 h 22342 # RM DECARM auto repeat: csi ? 8 l 22343 # DECSASD Select active main: csi 0 $ } 22344 # DECSASD Select active status: csi 1 $ } 22345 # DECSSDT Select status none: csi 0 $ ~ 22346 # DECSSDT Select status indic.: csi 1 $ ~ 22347 # DECSSDT Select status host-wr: csi 2 $ ~ 22348 # SM DECTCEM Visible cursor: csi ? 2 5 h 22349 # RM DECTCEM Invisible cursor: csi ? 2 5 l 22350 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h 22351 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l 22352 # DECSCL VT300 mode 8-bit ctrl: csi 6 3 " p 22353 # or DECSCL VT300 mode 8-bit ctrl: csi 6 3 ; 0 " p 22354 # DECSCL VT300 mode 7-bit ctrl: csi 6 3 ; 1 " p 22355 # Char. and Line attributes: csi Ps ... Ps m 22356 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 22357 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 22358 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr) 22359 bq300-8|Bull VT320 full 8 bits 80 columns, 22360 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 22361 cols#80, it#8, lines#24, vt#3, wsl#80, 22362 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 22363 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r, 22364 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D, 22365 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C, 22366 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A, 22367 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 22368 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J, 22369 el=\233K, el1=\2331K, enacs=\E(B\E)0, 22370 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H, 22371 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, 22372 ind=\ED, is1=\E[63;2"p\E[2h, 22373 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22374 l, 22375 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w, 22376 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s, 22377 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 22378 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~, 22379 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 22380 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 22381 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~, 22382 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, 22383 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~, 22384 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, 22385 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, 22386 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l, 22387 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>, 22388 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l, 22389 s0ds=\E(B, s1ds=\E(0, sc=\E7, 22390 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t; 22391 1%;m%?%p9%t\E(0%e\E(B%;, 22392 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 22393 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m, 22394 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~, 22395 use=vt220+cvis8, 22396 bq300-8rv|Bull VT320 8-bit reverse mode 80 columns, 22397 flash=\233?5l$<50>\233?5h, 22398 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22399 l, 22400 use=bq300-8, 22401 bq300-8w|Bull VT320 8-bit 132 columns, 22402 cols#132, wsl#132, 22403 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22404 l, 22405 rs2=\233?3h, use=bq300-8, 22406 bq300-w-8rv|Bull VT320 8-bit reverse mode 132 columns, 22407 cols#132, wsl#132, 22408 flash=\233?5l$<50>\233?5h, 22409 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22410 l, 22411 rs2=\233?3h, use=bq300-8, 22412 22413 # This entry is used for terminals with VT320 emulation mode 22414 # a 102 keys keyboard (PC scancode !) and following set-up : 22415 # 8 bit ISO Latin Character Set (ISO 8859-1), 22416 # 7 bit Control Characters, 22417 # 80 columns screen. 22418 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns, 22419 kbs=^H, kf1=\E[17~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, 22420 kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[18~, kf20@, 22421 kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, 22422 kf8=\E[25~, kf9=\E[26~, kfnd@, khlp@, krdo@, kslt@, lf1@, lf2@, 22423 lf3@, lf4@, use=vt220+pcedit, use=bq300, 22424 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns, 22425 flash=\E[?5l$<50>\E[?5h, 22426 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22427 l, 22428 use=bq300-pc, 22429 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal, 22430 cols#132, wsl#132, 22431 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22432 l, 22433 rs2=\E[?3h, use=bq300-pc, 22434 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns, 22435 cols#132, wsl#132, 22436 flash=\E[?5l$<50>\E[?5h, 22437 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4 22438 l, 22439 rs2=\E[?3h, use=bq300-pc, 22440 # 8 bit ISO Latin Character Set (ISO 8859-1), 22441 # 8 bit Control Characters, 22442 # 80 columns screen. 22443 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns, 22444 kend=\2334~, kf1=\23317~, kf10=\23328~, kf11=\23329~, 22445 kf12=\23331~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, 22446 kf2=\23318~, kf20@, kf3=\23319~, kf4=\23320~, kf5=\23321~, 22447 kf6=\23323~, kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, 22448 khlp@, khome=\2331~, krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, 22449 use=bq300-8, 22450 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns, 22451 flash=\E[?5l$<50>\E[?5h, 22452 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22453 l, 22454 use=bq300-8-pc, 22455 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns, 22456 cols#132, wsl#132, 22457 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22458 l, 22459 rs2=\E[?3h, use=bq300-8-pc, 22460 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns, 22461 cols#132, wsl#132, 22462 flash=\E[?5l$<50>\E[?5h, 22463 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4 22464 l, 22465 rs2=\E[?3h, use=bq300-8-pc, 22466 22467 #======================================================# 22468 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation # 22469 #======================================================# 22470 22471 # normal mode, 8 bits, 80 columns terminal. 22472 # BLD bell disable ^[g 22473 # BLE bell enable ^[h 22474 # CAMR char. attr. mode reset ^[[G 22475 # CAMS char. attr. mode set ^[[D 22476 # CLR clear ^[` 22477 # CM character mode (async.) ^[k 22478 # EP echoplex mode (by host) ^[m 22479 # IM insert mode set ^[[I 22480 # IMR insert mode reset ^[[J 22481 # KBL keyboard lock (reset) ^[[X 22482 # KBU keyboard unlock (set) ^[[W 22483 # LGR Line-graphic mode reset ^[F 22484 # LGS Line-graphic mode set ^[G 22485 # NEP non echoplex mode (by host) ^[l 22486 # PDS print data space ^[[0p 22487 # PDT print data terminator ^[[<p 22488 # PHD print host data ^[[3p 22489 # PRES print adapter reset ^[[2p 22490 # RBM block mode reset ^[[E 22491 # RES reset : ^[e 22492 # RIS reset initial state: ^[c 22493 # RMR roll mode reset ^[q 22494 # RMS roll mode set ^[r 22495 # SCD scroll down (72 lines) ^[[1s 22496 # SCU scroll up (72 lines) ^[[0s 22497 # SLL status line lock ^[O 22498 # SLR status line reset ^[v 22499 # SLS status line set ^[w 22500 # SM78 set mode vip7800 ^[[1q 22501 # SSP0 partition 0 set ^[[00u 22502 # SSP1 partition n format 1 ^[[PnPnSTRINGu 22503 # SSP2 partition n format 2 ^[[PnPnSTRINGu 22504 # SSP3 partition n format 3 ^[[PnPnu 22505 # SSPR multi-part. reset ^[[<>u 22506 # TBC tab clear (at cursor pos.) ^[[g 22507 # TBI tab initialize ^[[N 22508 # TBS tab set (at cursor pos.) ^[p 22509 # 22510 # ATR attribute (visual) 22511 # blink : ^[sB 22512 # dim : ^[sL 22513 # hide (blank) : ^[sH 22514 # inverse video : ^[sI 22515 # protected : ^[sP 22516 # reset : ^[sR 22517 # underline : ^[s_ 22518 # 22519 # This covers the vip7800 and BQ3155-vip7800 22520 vip|Bull Questar 3155-7800, 22521 am, eslok, hs, km, mc5i, msgr, xenl, xon, 22522 cols#80, it#8, lines#24, vt#3, wsl#80, 22523 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB, 22524 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 22525 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL, 22526 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK, 22527 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I, 22528 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH, 22529 is2=\E[00u\E[<>001001024080024080u\E[01u, 22530 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H, 22531 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB, 22532 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, 22533 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@, 22534 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1, 22535 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?, 22536 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_, 22537 kf4=\E8, kf5=\E:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER, 22538 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s, 22539 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1, 22540 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p, 22541 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI, 22542 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR, 22543 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG, 22544 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI, 22545 smul=\Es_, tbc=\E[N, tsl=\Ew, 22546 # normal screen, 8 bits, 132 columns terminal. 22547 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide, 22548 cols#132, wsl#132, 22549 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip, 22550 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines, 22551 lines#72, 22552 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip, 22553 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines, 22554 cols#132, lines#72, wsl#132, 22555 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip, 22556 22557 #### Chromatics 22558 # 22559 22560 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window 22561 # that is smaller than the screen, and puts up a warning message 22562 # outside the window. Te erases the warning message, puts the 22563 # window back to be the whole screen, and puts the cursor at just 22564 # below the small window. I defined <cnorm> and <civis> to really turn 22565 # the cursor on and off, but I have taken this out since I don't 22566 # like the cursor being turned off when vi exits. 22567 cg7900|chromatics|chromatics 7900, 22568 am, 22569 cols#80, lines#40, 22570 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^], 22571 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2, 22572 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|, 22573 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40 22574 \,, 22575 rmso=\001C1\,\001c2\,, 22576 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN 22577 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\, 22578 \001W0\,0\,79\,39\,, 22579 smso=\001C4\,\001c7\,, uc=^A^A_^A\0, 22580 22581 #### Computer Automation 22582 # 22583 22584 ca22851|Computer Automation 22851, 22585 am, 22586 cols#80, lines#24, 22587 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I, 22588 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n, 22589 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^, 22590 22591 #### Cybernex 22592 # 22593 22594 # This entry has correct padding and the undocumented "ri" capability 22595 cyb83|xl83|Cybernex xl-83, 22596 OTbs, am, 22597 cols#80, lines#24, 22598 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I, 22599 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N, 22600 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H, 22601 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N, 22602 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) 22603 cyb110|mdl110|Cybernex mdl-110, 22604 OTbs, am, 22605 cols#80, lines#24, 22606 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U, 22607 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 22608 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, 22609 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, 22610 ht=\011$<43>, ich1=\016A\035$<3.5>, 22611 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF, 22612 22613 #### Datapoint 22614 # 22615 # Datapoint is gone. They used to be headquartered in Texas. 22616 # They created ARCnet, an Ethernet competitor that flourished for a while 22617 # in the early 1980s before 3COM got wise and cut its prices. The service 22618 # side of Datapoint still lives (1995) in the form of Intelogic Trace. 22619 # 22620 22621 dp3360|datapoint|Datapoint 3360, 22622 OTbs, am, 22623 cols#82, lines#25, 22624 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z, 22625 ed=^_, el=^^, home=^], ind=\n, 22626 22627 # From: Jan Willem Stumpel <jw.stumpel (at] inter.nl.net>, 11 May 1997 22628 # The Datapoint 8242 Workstation was sold at least between 1985 22629 # and 1989. To make the terminal work with this entry, press 22630 # CONTROL-INT-INT to take the terminal off-line, and type (opt). 22631 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO 22632 # CR/LF off. Use control-shift-[] as escape key, control-I as tab, 22633 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in 22634 # fact unusable because the strings sent by the terminal conflict 22635 # with other keys). 22636 # The terminal is capable of displaying "box draw" characters. 22637 # For each graphic character you must send 2 ESC's (\E\E) followed 22638 # by a control character as follows: 22639 # character meaning 22640 # ========= ======= 22641 # ctrl-E top tee 22642 # ctrl-F right tee 22643 # ctrl-G bottom tee 22644 # ctrl-H left tee 22645 # ctrl-I cross 22646 # ctrl-J top left corner 22647 # ctrl-K top right corner 22648 # ctrl-L bottom left corner 22649 # ctrl-M bottom right corner 22650 # ctrl-N horizontal line 22651 # ctrl-O vertical line 22652 # Unfortunately this cannot be fitted into the termcap/terminfo 22653 # description scheme. 22654 dp8242|Datapoint 8242, 22655 msgr, 22656 cols#80, lines#25, 22657 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H, 22658 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, 22659 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C, 22660 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 22661 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee, 22662 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea, 22663 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n, 22664 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D, 22665 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 22666 smso=\E^E, smul=\E^F, 22667 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%' 22668 \0'%+%c\025, 22669 22670 #### DEC terminals (Obsolete types: DECwriter and VT40/42/50) 22671 # 22672 # These entries came from DEC's official terminfos for its older terminals 22673 # (which happen to be identical to the AT&T/SCO terminal descriptions), 22674 # Bill Hedberg <hedberg (at] hannah.enet.dec.com> of Terminal Support Engineering 22675 # may have had more information. Updated terminfos and termcaps were available 22676 # at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 22677 22678 # DEC's terminfos did not describe the auxiliary keypad. 22679 # 22680 # DECScope of course had no "function keys", but this building block assigns 22681 # the three blank keys at the top of the auxiliary (numeric) keypad, using 22682 # the same analogy as VT100 (also lacking function-keys). 22683 # 22684 # These assignments use the same layout for 0-9 as VT100+keypad; the VT52 22685 # keypad had its cursor-keys on the right-column as shown -TD 22686 # _______________________________________ 22687 # | PF1 | PF2 | PF3 | c-up | 22688 # | \EP | \EQ | \ER | \EA | 22689 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|kcuu1_k4_| 22690 # | 7 8 9 c-down | 22691 # | \E?w | \E?x | \E?y | \EB | 22692 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|kcud1____| 22693 # | 4 | 5 | 6 | c-right | 22694 # | \E?t | \E?u | \E?v | \EC | 22695 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|kcuf1_k8_| 22696 # | 1 | 2 | 3 | c-left | 22697 # | \E?q | \E?r | \E?s | \ED | 22698 # |_ka1__K1_|_kb2__K2_|_ka3__K3_|kcub1____| 22699 # | 0 | . | enter | 22700 # | \E?p | \E?n | \E?M | 22701 # |___kc1_______K4____|_kc3__K5_|_kent_@8_| 22702 # 22703 vt52+keypad|DECScope auxiliary keypad, 22704 ka1=\E?q, ka3=\E?s, kb2=\E?r, kc1=\E?p, kc3=\E?n, kf0=\E?y, 22705 kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v, 22706 kf8=\E?w, kf9=\E?x, 22707 22708 gt40|DEC gt40, 22709 OTbs, os, 22710 cols#72, lines#30, 22711 bel=^G, cr=\r, cub1=^H, cud1=\n, 22712 gt42|DEC gt42, 22713 OTbs, os, 22714 cols#72, lines#40, 22715 bel=^G, cr=\r, cub1=^H, cud1=\n, 22716 22717 vt50|DEC VT50, 22718 OTbs, 22719 cols#80, lines#12, 22720 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 22721 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ, 22722 vt50h|DEC VT50h, 22723 cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 22724 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, u8=\E/[HJ], 22725 use=vt52+keypad, use=vt50, 22726 22727 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>) 22728 vt61|vt-61|vt61.5|DEC VT61, 22729 cols#80, lines#24, 22730 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n, 22731 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, 22732 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I, 22733 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 22734 ri=\E$<20>I, 22735 22736 # The gigi does standout with red! 22737 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr) 22738 gigi|vk100|DEC gigi graphics terminal, 22739 OTbs, am, xenl, 22740 cols#84, lines#24, 22741 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H, 22742 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 22743 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 22744 el=\E[K, ht=^I, ind=\n, 22745 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, 22746 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 22747 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 22748 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 22749 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m, 22750 smul=\E[4m, 22751 22752 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce 22753 # a PC differentiated from the IBM clones. It was a total, ludicrous, 22754 # grossly-overpriced failure (among other things, DEC's OS didn't include 22755 # a format program, so you had to buy pre-formatted floppies from DEC at 22756 # a hefty premium!). 22757 pro350|decpro|DEC pro console, 22758 OTbs, 22759 cols#80, it#8, lines#24, 22760 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 22761 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, 22762 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 22763 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 22764 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI, 22765 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG, 22766 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D, 22767 22768 dw1|DECwriter I, 22769 OTbs, hc, os, 22770 cols#72, 22771 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, 22772 dw2|decwriter|dw|DECwriter II, 22773 OTbs, hc, os, 22774 cols#132, 22775 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H, 22776 # \E(B Use U.S. character set (otherwise # => british pound !) 22777 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) 22778 # \E[w 10 char/in pitch 22779 # \E[1;132 full width horizontal margins 22780 # \E[2g clear all tab stops 22781 # \E[z 6 lines/in 22782 # \E[66t 66 lines/page (for \f) 22783 # \E[1;66r full vertical page can be printed 22784 # \E[4g clear vertical tab stops 22785 # \E> disable alternate keypad mode (so it transmits numbers!) 22786 # \E[%i%p1%du set tab stop at column %d (origin == 1) 22787 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is 22788 # a tab stop) 22789 # 22790 # The dw3 does standout with wide characters. 22791 # 22792 dw3|la120|DECwriter III, 22793 OTbs, hc, os, 22794 cols#132, 22795 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, 22796 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>, 22797 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u 22798 \r, 22799 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w, 22800 dw4|DECwriter IV, 22801 OTbs, am, hc, os, 22802 cols#132, 22803 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H, 22804 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 22805 22806 # These aren't official 22807 ln03|DEC ln03 laser printer, 22808 hc, 22809 cols#80, lines#66, 22810 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n, 22811 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m, 22812 smul=\E[4m, 22813 ln03-w|DEC ln03 laser printer 132 cols, 22814 cols#132, 22815 kbs=^H, kcub1=^H, kcud1=\n, use=ln03, 22816 22817 #### Delta Data (dd) 22818 # 22819 22820 # Untested. The cup sequence is hairy enough that it probably needs work. 22821 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. 22822 # There are BSD-derived termcap entries floating around for this puppy 22823 # that are *certainly* wrong. 22824 delta|dd5000|delta data 5000, 22825 OTbs, am, 22826 cols#80, lines#27, 22827 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y, 22828 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%- 22829 %{57}%+%c, 22830 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n, 22831 22832 #### Digital Data Research (ddr) 22833 # 22834 22835 # (ddr: I added <rmam>/<smam> based on the init string -- esr) 22836 ddr|rebus3180|ddr3180|Rebus/DDR 3180 VT100 emulator, 22837 OTbs, am, xenl, 22838 cols#80, it#8, lines#24, vt#3, 22839 blink=\E[5m$<2/>, bold=\E[1m$<2/>, 22840 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H, 22841 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 22842 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 22843 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, 22844 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 22845 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 22846 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, 22847 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>, 22848 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 22849 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, 22850 smul=\E[4m$<2/>, 22851 22852 #### Evans & Sutherland 22853 # 22854 22855 # Jon Leech <leech (at] cs.unc.edu> tells us: 22856 # The ps300 was the Evans & Sutherland Picture System 300, a high 22857 # performance 3D vector graphics system with a bunch of specialized hardware. 22858 # Approximate date of release was 1982 (early 80s, anyway), and it had several 22859 # evolutions including (limited) color versions such as the PS330C. PS300s 22860 # were effectively obsolete by the late 80s, replaced by raster graphics 22861 # systems, although specialized applications like molecular modeling 22862 # hung onto them for a while longer. AFAIK all E&S vector graphics systems 22863 # are out of production, though of course E&S is very much alive (in 1996). 22864 # (ps300: changed ":pt@:" to "it@" -- esr) 22865 # 22866 ps300|Picture System 300, 22867 xt, 22868 it@, 22869 rmso@, rmul@, smso@, smul@, use=vt100+4bsd, 22870 22871 #### General Electric (ge) 22872 # 22873 22874 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, 22875 OTbs, hc, os, 22876 cols#120, 22877 bel=^G, cr=\r, cud1=\n, ind=\n, 22878 22879 #### Heathkit/Zenith 22880 # 22881 22882 # Here is a description of the H19 DIP switches: 22883 # 22884 # S401 22885 # 0-3 = baud rate as follows: 22886 # 22887 # 3 2 1 0 22888 # --- --- --- --- 22889 # 0 0 1 1 300 baud 22890 # 0 1 0 1 1200 baud 22891 # 1 0 0 0 2400 baud 22892 # 1 0 1 0 4800 baud 22893 # 1 1 0 0 9600 baud 22894 # 1 1 0 1 19.2K baud 22895 # 22896 # 4 = parity (0 = no parity) 22897 # 5 = even parity (0 = odd parity) 22898 # 6 = stick parity (0 = normal parity) 22899 # 7 = full duplex (0 = half duplex) 22900 # 22901 # S402 22902 # 0 = block cursor (0 = underscore cursor) 22903 # 1 = no key click (0 = keyclick) 22904 # 2 = wrap at end of line (0 = no wrap) 22905 # 3 = auto LF on CR (0 = no LF on CR) 22906 # 4 = auto CR on LF (0 = no CR on LF) 22907 # 5 = ANSI mode (0 = VT52 mode) 22908 # 6 = keypad shifted (0 = keypad unshifted) 22909 # 7 = 50Hz refresh (1 = 60Hz refresh) 22910 # 22911 # Factory Default settings are as follows: 22912 # 7 6 5 4 3 2 1 0 22913 # S401 1 0 0 0 1 1 0 0 22914 # S402 0 0 0 0 0 0 0 0 22915 # (h19: I added <rmam>/<smam> based on the init string; 22916 # also added empty <acsc> to suppress a tic warning -- esr) 22917 h19-a|h19a|heath-ansi|heathkit-a|Heathkit h19 ANSI mode, 22918 OTbs, am, mir, msgr, 22919 cols#80, it#8, lines#24, 22920 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H, 22921 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, 22922 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>, 22923 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n, 22924 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h, 22925 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, 22926 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, 22927 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white, 22928 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, 22929 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m, 22930 h19-bs|Heathkit w/keypad shifted, 22931 rmkx=\Eu, smkx=\Et, use=h19-b, 22932 h19-us|h19us|h19-smul|Heathkit w/keypad shifted/underscore cursor, 22933 rmkx=\Eu, smkx=\Et, use=h19-u, 22934 # (h19: merged in <ip> from BSDI hp19-e entry>; 22935 # also added empty <acsc> to suppress a tic warning --esr) 22936 # From: Tim Pierce <twp (at] skepsis.com>, 23 Feb 1998 22937 # Tim tells us that: 22938 # I have an old Zenith-19 terminal at home that still gets a lot of use. 22939 # This terminal suffers from the same famous insert-mode padding lossage 22940 # that has been acknowledged for the Z29 terminal. Emacs is nearly 22941 # unusable on this box, since even a half-scroll up or down the window 22942 # causes flaming terminal death. 22943 # 22944 # On the Z19, the only way I have found around this problem is to remove 22945 # the :al: and :dl: entries entirely. No amount of extra padding will 22946 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$> 22947 # makes Emacs a little slower, but it remains in the land of the living. 22948 # Big win. 22949 h19|heath|h19-b|heathkit|heath-19|z19|zenith|Heathkit h19, 22950 OTbs, am, eslok, hs, mir, msgr, 22951 cols#80, it#8, lines#24, 22952 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G, 22953 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 22954 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4, 22955 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n, 22956 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 22957 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, 22958 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red, 22959 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, 22960 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, 22961 h19-u|Heathkit with underscore cursor, 22962 cnorm@, cvvis@, use=h19-b, 22963 h19-g|h19g|Heathkit w/block cursor, 22964 cnorm=\Ex4, cvvis@, use=h19-b, 22965 alto-h19|altoh19|altoheath|alto-heath|alto emulating Heathkit h19, 22966 lines#60, 22967 dl1=\EM, il1=\EL, use=h19, 22968 22969 # The major problem with the Z29 is that it requires more padding than the Z19. 22970 # 22971 # The problem with declaring an H19 to be synonymous with a Z29 is that 22972 # it needs more padding. It especially loses if a program attempts 22973 # to put the Z29 into insert mode and insert text at 9600 baud. It 22974 # even loses worse if the program attempts to insert tabs at 9600 22975 # baud. Adding padding to text that is inserted loses because in 22976 # order to make the Z29 not die, one must add so much padding that 22977 # whenever the program tries to use insert mode, the effective 22978 # rate is about 110 baud. 22979 # 22980 # What program would want to put the terminal into insert mode 22981 # and shove stuff at it at 9600 baud you ask? 22982 # 22983 # Emacs. Emacs seems to want to do the mathematically optimal 22984 # thing in doing a redisplay rather than the practical thing. 22985 # When it is about to output a line on top of a line that is 22986 # already on the screen, instead of just killing to the end of 22987 # the line and outputting the new line, it compares the old line 22988 # and the new line and if there are any similarities, it 22989 # constructs the new line by deleting the text on the old line 22990 # on the terminal that is already there and then inserting new 22991 # text into the line to transform it into the new line that is 22992 # to be displayed. The Z29 does not react kindly to this. 22993 # 22994 # But don't cry for too long.... There is a solution. You can make 22995 # a termcap entry for the Z29 that says the Z29 has no insert mode. 22996 # Then Emacs cannot use it. "Oh, no, but now inserting into a 22997 # line will be really slow", you say. Well there is a sort of a 22998 # solution to that too. There is an insert character option on 22999 # the Z29 that will insert one character. Unfortunately, it 23000 # involves putting the terminal into ANSI mode, inserting the 23001 # character, and changing it back to H19 mode. All this takes 12 23002 # characters. Pretty expensive to insert one character, but it 23003 # works. Either Emacs doesn't try to use its inserting hack when 23004 # it's only given an insert character ability or the Z29 doesn't 23005 # require padding with this (the former is probably more likely, 23006 # but I haven't checked it out). 23007 # (z29: added empty <acsc> to suppress a tic warning, merged in 23008 # status line capabilities from BRL entry --esr) 23009 z29|zenith29|z29b|Zenith z29b, 23010 OTbs, OTpt, am, eslok, hs, mir, msgr, 23011 OTkn#10, cols#80, lines#24, 23012 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, 23013 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 23014 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, 23015 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, 23016 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I, 23017 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>, 23018 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 23019 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 23020 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 23021 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, 23022 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8, 23023 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 23024 # z29 in ANSI mode. Assumes that the cursor is in the correct state, and that 23025 # the world is stable. <rs1> causes the terminal to be reset to the state 23026 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore 23027 # cursor, bc -> block cursor. 23028 # From: Mike Meyers 23029 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts> 23030 # looks VT100-compatible -- esr) 23031 z29a|z29a-kc-bc|h29a-kc-bc|Heath/Zenith 29 in ANSI mode, 23032 OTbs, OTpt, am, eslok, hs, mir, msgr, 23033 OTkn#10, cols#80, it#8, lines#24, 23034 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, 23035 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 23036 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, 23037 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 23038 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 23039 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, 23040 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100, 23041 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J, 23042 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, 23043 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, 23044 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, 23045 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM, 23046 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m, 23047 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m 23048 \E[11m, 23049 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m, 23050 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, 23051 z29a-kc-uc|h29a-kc-uc|Zenith z29 ANSI mode with keyclick and underscore cursor, 23052 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11 23053 m, 23054 use=z29a, 23055 z29a-nkc-bc|h29a-nkc-bc|Zenith z29 ANSI mode with block cursor and no keyclick, 23056 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m 23057 \E[11m, 23058 use=z29a, 23059 z29a-nkc-uc|h29a-nkc-uc|Zenith z29 ANSI mode with underscore cursor and no keyclick, 23060 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m 23061 \E[11m, 23062 use=z29a, 23063 # From: Jeff Bartig <jeffb (at] dont.doit.wisc.edu> 31 Mar 1995 23064 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode, 23065 am, eslok, hs, mc5i, mir, msgr, xon, 23066 cols#80, lines#24, 23067 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 23068 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h, 23069 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r, 23070 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 23071 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 23072 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 23073 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 23074 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K, 23075 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L, 23076 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, 23077 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, 23078 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS, 23079 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, 23080 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H, 23081 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m, 23082 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m, 23083 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0, 23084 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 23085 tsl=\E[s\E[>1h\E[25;%i%p1%dH, 23086 23087 # From: Brad Brahms <Brahms@USC-ECLC> 23088 z100|h100|z110|z-100|h-100|Heath/Zenith z-100 pc with color monitor, 23089 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw, 23090 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr) 23091 z100bw|h100bw|z110bw|z-100bw|h-100bw|Heath/Zenith z-100 pc, 23092 OTbs, OTpt, mir, msgr, 23093 OTkn#10, cols#80, it#8, lines#24, 23094 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, 23095 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC, 23096 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA, 23097 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK, 23098 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB, 23099 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU, 23100 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI, 23101 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, 23102 smir=\E@, smso=\Ep, 23103 p19|h19-b with il1/dl1, 23104 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b, 23105 # From: <ucscc!B.fiatlux (at] ucbvax.berkeley.edu> 23106 # (ztx: removed duplicate :sr: -- esr) 23107 ztx|ztx11|zt-1|htx11|ztx-1-a|Heath/Zenith ztx-10 or 11, 23108 OTbs, am, eslok, hs, 23109 cols#80, it#8, lines#24, 23110 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC, 23111 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 23112 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, 23113 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, 23114 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES, 23115 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER, 23116 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2, 23117 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 23118 23119 #### IMS International (ims) 23120 # 23121 # There was a company called IMS International located in Carson City, 23122 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100 23123 # bus/Z80 hardware and a line of terminals called Ultimas. 23124 # 23125 23126 # From: Erik Fair <fair (at] ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 23127 ims950-b|bare ims950 no init string, 23128 is2@, use=ims950, 23129 # (ims950: removed obsolete ":ko@:" -- esr) 23130 ims950|IMS TeleVideo 950 emulation, 23131 xenl@, 23132 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 23133 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950, 23134 # (ims950-rv: removed obsolete ":ko@:" -- esr) 23135 ims950-rv|IMS tvi950 rev video, 23136 xenl@, 23137 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 23138 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv, 23139 ims-ansi|ultima2|ultimaII|IMS Ultima II, 23140 OTbs, am, 23141 cols#80, it#8, lines#24, 23142 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC, 23143 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K, 23144 ht=^I, if=/usr/share/tabset/vt100, 23145 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, 23146 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM, 23147 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m, 23148 smul=\E[4m, 23149 23150 #### Intertec Data Systems 23151 # 23152 # I think this company is long dead as of 1995. They made an early CP/M 23153 # micro called the "Intertec Superbrain" that was moderately popular, 23154 # then sank out of sight. 23155 # 23156 23157 superbrain|Intertec Superbrain, 23158 OTbs, am, bw, 23159 cols#80, lines#24, 23160 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n, 23161 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K, 23162 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U, 23163 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L, 23164 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, 23165 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, 23166 # and the reverse is actually true. Try it. -- esr) 23167 intertube|intertec|Intertec InterTube, 23168 OTbs, am, 23169 cols#80, lines#25, 23170 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F, 23171 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A, 23172 ind=\n, rmso=\E0@, smso=\E0P, 23173 # The intertube 2 has the "full duplex" problem like the Tektronix 4025: if you 23174 # are typing and a command comes in, the keystrokes you type get interspersed 23175 # with the command and it messes up 23176 intertube2|Intertec data systems InterTube 2, 23177 OTbs, 23178 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 23179 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, 23180 ll=^K^X\r, vpa=\013%p1%c, use=intertube, 23181 23182 #### Ithaca Intersystems 23183 # 23184 # This company made S100-bus personal computers long ago in the pre-IBM-PC 23185 # past. They used to be reachable at: 23186 # 23187 # Ithaca Intersystems 23188 # 1650 Hanshaw Road 23189 # Ithaca, New York 14850 23190 # 23191 # However, the outfit went bankrupt years ago. 23192 # 23193 23194 # The Graphos III was a color graphics terminal from Ithaca Intersystems. 23195 # These entries were written (originally in termcap syntax) by Brian Yandell 23196 # <yandell (at] stat.wisc.edu> and Mike Meyer <mikem (at] stat.wisc.edu> at the 23197 # University of Wisconsin. 23198 23199 # (graphos: removed obsolete and syntactically incorrect :kn=4:, 23200 # removed <if=/usr/share/tabset/init.graphos> and 23201 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr) 23202 graphos|graphos III, 23203 am, mir, 23204 cols#80, it#8, lines#24, 23205 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, 23206 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 23207 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 23208 cuu=\E[%p1%dA, cuu1=\E[A, 23209 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, 23210 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 23211 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 23212 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 23213 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l, 23214 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h, 23215 smir=\E[4h, smso=\E[7m, 23216 graphos-30|graphos III with 30 lines, 23217 lines#30, 23218 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos, 23219 23220 #### Modgraph 23221 # 23222 # These people used to be reachable at: 23223 # 23224 # Modgraph, Inc 23225 # 1393 Main Street, 23226 # Waltham, MA 02154 23227 # Vox: (617)-890-5796. 23228 # 23229 # However, if you call that number today you'll get an insurance company. 23230 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated 23231 # 26 Feb 1997 that says: 23232 # 23233 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been 23234 # for ~7 years. Modgraph still in business. Products are rugged laptop and 23235 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount 23236 # panel-mount etc). I can be emailed at sonfour (at] aol.com 23237 # 23238 # Peter D. Smith <pdsmith (at] nbbn.com> notes that his modgraph manual was 23239 # dated 1984. According to the manual, it featured Tek 4010/4014 23240 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard. 23241 # 23242 23243 modgraph|mod24|modgraph terminal emulating VT100, 23244 xenl@, 23245 cvvis=\E\^9;0s\E\^7;1s, 23246 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11 23247 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s 23248 \E\^11;81s\E\^11;89s, 23249 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd, 23250 # The GX-1000 manual is dated 1984. This looks rather like a VT-52. 23251 modgraph2|modgraph gx-1000 80x24 with keypad not enabled, 23252 am, da, db, 23253 cols#80, it#8, lines#24, 23254 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>, 23255 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, 23256 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I, 23257 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E 23258 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7 23259 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25; 23260 1s\E\^9;1s\E\^27;1, 23261 ri=\EI$<5/>, 23262 # 23263 # Modgraph from Nancy L. Cider <nancyc@brl-tbd> 23264 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>: 23265 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a 23266 # mark and using delete-to-killbuffer work correctly. However, we would 23267 # like normal mode of operation to be using a Modgraph with 48 line setting. 23268 # If we set TERM=mod (which is a valid entry in termcap with 48 lines) 23269 # the setting mark and delete-to-killbuffer results in the deletion of only 23270 # the line the mark is set on. 23271 # We've discovered that the delete-to-killbuffer works correctly 23272 # with TERM=mod and screen set to 80x48 but it's not obvious. Only 23273 # the first line disappears but a ctrl-l shows that it did work 23274 # correctly. 23275 modgraph48|mod|Modgraph w/48 lines, 23276 OTbs, OTpt, am, xenl, 23277 cols#80, it#8, lines#48, vt#3, 23278 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 23279 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C, 23280 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 23281 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, 23282 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, 23283 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 23284 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, 23285 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 23286 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, 23287 smso=\E[7m, smul=\E[4m, 23288 23289 #### Morrow Designs 23290 # 23291 # This was George Morrow's company. They started in the late 1970s making 23292 # S100-bus machines. They used to be reachable at: 23293 # 23294 # Morrow 23295 # 600 McCormick St. 23296 # San Leandro, CA 94577 23297 # 23298 # but they're long gone now (1995). 23299 # 23300 23301 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer. 23302 # Jeff's specimen was dated June 1984. 23303 # From: Jeff Wieland <wieland (at] acn.purdue.edu> 24 Feb 1995 23304 mt70|mt-70|Morrow MD-70; native Morrow mode, 23305 am, mir, msgr, xon, 23306 cols#80, it#8, lines#24, 23307 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G, 23308 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H, 23309 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, 23310 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>, 23311 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE, 23312 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r, 23313 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r, 23314 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r, 23315 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r, 23316 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r, 23317 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 23318 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_, 23319 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], 23320 smul=\EG1, tbc=\E0, use=adm+sgr, 23321 23322 #### Motorola 23323 # 23324 23325 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL 23326 # (Seth H Zirin) 23327 ex155|Motorola Exorterm 155, 23328 OTbs, am, bw, 23329 OTkn#5, OTug#1, cols#80, lines#24, 23330 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC, 23331 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET, 23332 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, 23333 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, 23334 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, 23335 23336 #### Omron 23337 # 23338 # This company is still around in 1995, manufacturing point-of-sale systems. 23339 23340 omron|Omron 8025AG, 23341 OTbs, am, da, db, 23342 cols#80, lines#24, 23343 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA, 23344 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH, 23345 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef, 23346 23347 #### Ramtek 23348 # 23349 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they 23350 # were competition for things like the Tektronix 4025. 23351 # 23352 23353 # Ramtek 6221 from BRL, probably by Doug Gwyn 23354 # The following SET-UP modes are assumed for normal operation: 23355 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON 23356 # NEWLINE_OFF 80_COLUMNS 23357 # Other SET-UP modes may be set for operator convenience or communication 23358 # requirements; I recommend 23359 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON 23360 # Hardware tabs are assumed to be every 8 columns; they can be set up by the 23361 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this). 23362 # Note that the Control-E key is useless on this brain-damaged terminal. No 23363 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 23364 rt6221|Ramtek 6221 80x24, 23365 OTbs, OTpt, msgr, xon, 23366 OTkn#4, cols#80, it#8, lines#24, vt#3, 23367 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, 23368 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r, 23369 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 23370 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 23371 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 23372 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, 23373 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, 23374 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, 23375 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, 23376 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, 23377 rmso=\E[m, rmul=\E[m, 23378 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h 23379 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E# 23380 5\E>, 23381 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, 23382 smul=\E[4m, tbc=\E[3g, 23383 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)]. 23384 rt6221-w|Ramtek 6221 160x48, 23385 cols#160, lines#48, 23386 ll=\E[48;1H, use=rt6221, 23387 23388 #### RCA 23389 # 23390 23391 # RCA VP3301 or VP3501 23392 rca|RCA vp3301/vp3501, 23393 OTbs, 23394 cols#40, lines#24, 23395 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 23396 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1, 23397 23398 23399 #### Selanar 23400 # 23401 23402 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn 23403 # The following SET-UP modes are assumed for normal operation: 23404 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS 23405 # ONLINE ANSI CURSOR_VISIBLE 23406 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF 23407 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED 23408 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN 23409 # For use with graphics software, all graphics modes should be set to factory 23410 # default. Other SET-UP modes may be set for operator convenience or 23411 # communication requirements. No delays are specified; use "stty ixon -ixany" 23412 # to enable DC3/DC1 flow control! 23413 # I commented out the scrolling capabilities since they are too slow. 23414 hirez100|Selanar HiREZ-100, 23415 OTbs, OTpt, mir, msgr, xon, 23416 OTkn#4, cols#80, it#8, lines#48, vt#3, 23417 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 23418 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 23419 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 23420 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 23421 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 23422 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, 23423 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, 23424 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, 23425 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, 23426 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, 23427 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 23428 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1 23429 9l\E[r\E[m\E(B\017\E)0\E>, 23430 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, 23431 smul=\E[4m, tbc=\E[3g, 23432 hirez100-w|Selanar HiREZ-100 in 132-column mode, 23433 cols#132, use=hirez100, 23434 23435 #### Signetics 23436 # 23437 23438 # From University of Wisconsin 23439 vsc|Signetics Vsc Video driver by RMC, 23440 am, msgr, 23441 cols#80, it#8, lines#26, 23442 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C, 23443 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 23444 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s, 23445 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", 23446 23447 #### Soroc 23448 # 23449 # Alan Frisbie <frisbie (at] flying-disk.com> writes: 23450 # 23451 # As you may recall, the Soroc logo consisted of their name, 23452 # with the letter "S" superimposed over an odd design. This 23453 # consisted of a circle with a slightly smaller 15 degree (approx.) 23454 # wedge with rounded corners inside it. The color was sort of 23455 # a metallic gold/yellow. 23456 # 23457 # If I had been more of a beer drinker it might have been obvious 23458 # to me, but it took a clue from their service department to make 23459 # me exclaim, "Of course!" The circular object was the top of 23460 # a beer can (the old removable pop-top style) and "Soroc" was an 23461 # anagram for "Coors". 23462 # 23463 # I can just imagine the founders of the company sitting around 23464 # one evening, tossing back a few and trying to decide what to 23465 # call their new company and what to use for a logo. 23466 # 23467 23468 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) 23469 soroc120|iq120|soroc|Soroc iq120, 23470 clear=\E*$<2>, ed=\EY, el=\ET, use=adm3a, 23471 soroc140|iq140|Soroc iq140, 23472 OTbs, am, mir, 23473 cols#80, lines#24, 23474 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 23475 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew, 23476 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n, 23477 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, 23478 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 23479 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?, 23480 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A, 23481 23482 #### Southwest Technical Products 23483 # 23484 # These guys made an early personal micro called the M6800. 23485 # The ct82 was probably its console terminal. 23486 # 23487 23488 # (swtp: removed obsolete ":bc=^D:" -- esr) 23489 swtp|ct82|Southwest Technical Products ct82, 23490 am, 23491 cols#82, lines#20, 23492 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S, 23493 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F, 23494 home=^P, ich1=^\^X, il1=^\^Y, ind=^N, 23495 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036 23496 \017\035\027\022\011, 23497 ll=^C, ri=^O, rmso=^^^F, smso=^^^V, 23498 23499 #### Synertek 23500 # 23501 # Bob Manson <manson (at] pattyr.acs.ohio-state.edu> writes (28 Apr 1995): 23502 # 23503 # Synertek used to make ICs, various 6502-based single-board process 23504 # control and hobbyist computers, and assorted peripherals including a 23505 # series of small inexpensive terminals (I think they were one of the 23506 # first to have a "terminal-on-a-keyboard", where the terminal itself 23507 # was only slightly larger than the keyboard). 23508 # 23509 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40 23510 # was a 40x24 terminal that could connect to a standard TV through a 23511 # video modulator. The KTM-2/80 was the 80-column version (the 2/40 23512 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM). 23513 # I have a KTM-2/80 still in working order. The KTM-2s had fully 23514 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program 23515 # ROM and 2 ROMs as character generators. They were incredibly simple, 23516 # and I've never had any problems with mine (witness the fact that mine 23517 # was made in 1981 and is still working great... I've blown the video 23518 # output transistor a couple of times, but it's a 2N2222 :-) 23519 # 23520 # The KTM-3 (which is what is listed in the terminfo file) was their 23521 # attempt at putting a KTM-2 in a box (and some models came with a 23522 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the 23523 # control and escape sequences are very different. The KTM-3 was always 23524 # real broken, at least according to the folks I've talked to about it. 23525 # 23526 # The padding in the entry is probably off--these terminals were very 23527 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And 23528 # anyone with any sanity replaced the ROMs with something that provided 23529 # a reasonable subset of VT100 functionality, since the usual ROMs were 23530 # obviously very primitive... oh, you could get an upgraded ROM from 23531 # Synertek for some incredible amount of money, but what hacker with an 23532 # EPROM burner would do that? :) 23533 # 23534 # Sorry I don't have any contact info; I believe they were located in 23535 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs 23536 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer 23537 # business these days. 23538 # 23539 23540 # Tested, seems to work fine with vi. 23541 synertek|ktm|synertek380|Synertek KTM 3/80 tubeless terminal, 23542 am, 23543 cols#80, lines#24, 23544 clear=^Z, cub1=^H, cuf1=^L, 23545 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 23546 23547 #### Tab Office Products 23548 # 23549 # TAB Products Co. - Palo Alto, California 23550 # Electronic Office Products, 23551 # 1451 California Avenue 94304 23552 # 23553 # I think they're out of business. 23554 # 23555 23556 # The tab 132 uses xon/xoff, so no padding needed. 23557 # <smkx>/<rmkx> have nothing to do with arrow keys. 23558 # <is2> sets 80 col mode, normal video, autowrap on (for <am>). 23559 # Seems to be no way to get rid of status line. 23560 # The manual for this puppy was dated June 1981. It claims to be VT52- 23561 # compatible but looks more VT100-like -esr 23562 # 23563 # According to 23564 # https://ub.fnwi.uva.nl/computermuseum/tab13215g.html 23565 # This monochrome graphics terminal of TAB Products, California, is a DEC 23566 # VT52/VT100/VT132 compatible alphanumeric terminal (TAB 132/15), 23567 # factory-fitted with additional hardware for Tektronix 4010 emulation. 23568 # Also the terminal understands a selection of Tektronix 4027 commands. 23569 tab132|tab|tab132-15|tab 132/15, 23570 da, db, 23571 OTdN@, lm#96, 23572 cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, il1=\E[L, 23573 is2=\E[?7h\E[?3l\E[?5l, rmir=\E[4l, rmkx@, smir=\E[4h, 23574 smkx@, use=decid+cpr, use=vt100+4bsd, 23575 tab132-w|tab132 in wide mode, 23576 cols#132, 23577 is2=\E[?7h\E[?3h\E[?5l, use=tab132, 23578 tab132-rv|tab132 in reverse-video mode, 23579 is2=\E[?7h\E[?3l\E[?5h, use=tab132, 23580 tab132-w-rv|tab132 in reverse-video/wide mode, 23581 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w, 23582 23583 23584 #### Teleray 23585 # 23586 # Research Incorporated 23587 # 6425 Flying Cloud Drive 23588 # Eden Prairie, MN 55344 23589 # Vox: (612)-941-3300 23590 # 23591 # The Teleray terminals were all discontinued in 1992-93. RI still services 23592 # and repairs these beasts, but no longer manufactures them. The Teleray 23593 # people believe that all the types listed below are very rare now (1995). 23594 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and 23595 # Model 100) that were ANSI-compatible. 23596 # 23597 # Note two things called "teleray". Reorder should move the common one 23598 # to the front if you have either. A dumb Teleray with the cursor stuck 23599 # on the bottom and no obvious model number is probably a 3700. 23600 # 23601 23602 t3700|dumb Teleray 3700, 23603 OTbs, 23604 cols#80, lines#24, 23605 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n, 23606 t3800|Teleray 3800 series, 23607 OTbs, 23608 cols#80, it#8, lines#24, 23609 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 23610 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 23611 home=\EH, ht=^I, ind=\n, ll=\EY7\s, 23612 t1061|teleray|Teleray 1061, 23613 OTbs, am, km, xhp, xt, 23614 cols#80, it#8, lines#24, xmc#1, 23615 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 23616 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 23617 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF, 23618 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>, 23619 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5 23620 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef, 23621 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7, 23622 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH, 23623 tbc=\EG, 23624 t1061f|Teleray 1061 with fast PROMs, 23625 dl1=\EM, il1=\EL, ip@, use=t1061, 23626 # "Teleray Arpa Special", officially designated as 23627 # "Teleray Arpa network model 10" with "Special feature 720". 23628 # This is the new (1981) fast microcode updating the older "arpa" proms 23629 # (which gave meta-key and programmable-fxn keys). 720 is much much faster, 23630 # converts the keypad to programmable function keys, and has other goodies. 23631 # Standout mode is still broken (magic cookie, etc) so is suppressed as no 23632 # programs handle such lossage properly. 23633 # Note: this is NOT the old termcap's "t1061f with fast proms." 23634 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah 23635 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr) 23636 t10|Teleray 10 special, 23637 OTbs, km, xhp, xt, 23638 cols#80, it#8, lines#24, xmc#2, 23639 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC, 23640 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 23641 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 23642 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD, 23643 smul=\ERH, 23644 # Teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and 23645 # back/forth words. Put the function keys (f1-f10) where they can be 23646 # found, and turn off the other magic keys along the top row, except 23647 # for line/local. Do the magic appropriate to make the page shifts work. 23648 # Also toggle ^S/^Q for those of us who use Emacs. 23649 t16|Teleray 16, 23650 am, da, db, mir, xhp, xt, 23651 cols#80, lines#24, 23652 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B, 23653 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P, 23654 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L, 23655 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, 23656 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T, 23657 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m, 23658 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h, 23659 smso=\E[7m, smul=\E[4m, 23660 23661 #### Texas Instruments (ti) 23662 # 23663 23664 # The Silent 700 was so called because it was built around a quiet thermal 23665 # printer. It was portable, equipped with an acoustic coupler, and pretty 23666 # neat for its day. 23667 ti700|ti733|ti735|ti745|ti800|Texas Instruments Silent 700/733/735/745 or OMNI 800, 23668 OTbs, hc, os, 23669 cols#80, 23670 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n, 23671 23672 # Terminal entries for the Texas Instruments 703/707 23673 # hardcopy terminals. 23674 # 23675 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/ 23676 # Refer to: 23677 # Model 707 Data Terminal User's Manual 23678 # http://www.bitsavers.org/pdf/ti/terminal/silent_700/2310451-0001_Silent_700_Model_707_Users_Manual_Nov1983.pdf 23679 # 23680 # pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch 23681 # (cpi) (80 characters per line) by default, and can be switched to/from 17.0 23682 # cpi using an escape sequence. There is no 80/132-column capability in 23683 # terminfo (only the more general cpi which allows any value). 23684 ti703|ti707|Texas Instruments Silent 703/707, 23685 am, xenl, 23686 it#8, 23687 cuf1=\s, is2=\EPC\\, nel=\r\n, use=ti700, 23688 ti703-w|ti707-w|Texas Instruments Silent 703/707 (132 column), 23689 cols#132, 23690 is2=\EPD\\, use=ti703, 23691 23692 # 23693 # Texas Instruments 916 VDT 7 bit control mode 23694 # 23695 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 VT220 mode 7 bit CTRL, 23696 da, db, in, 23697 cbt=\E[Z, clear=\E[H\E[2J$<6>, dch=\E[%p1%dP$<250>, 23698 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, 23699 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>, 23700 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>, 23701 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H, 23702 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~, 23703 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~, 23704 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 23705 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T, 23706 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@, 23707 smacs=\016$<2>, vpa=\E[%p1%{1}%+%dd, use=vt220, 23708 # 23709 # Texas Instruments 916 VDT 8 bit control mode 23710 # 23711 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 VT220 mode bit CTRL, 23712 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 23713 kcuu1=\233A, kdch1=\233P, kf1=\23317~, kf10=\23328~, 23714 kf11=\23329~, kf12=\23331~, kf2=\23318~, kf3=\23319~, 23715 kf4=\23320~, kf5=\23321~, kf6=\23323~, kf7=\23324~, 23716 kf8=\23325~, kf9=\23326~, khome=\233H, kich1=\233@, 23717 knp=\233S, kpp=\233T, use=ti916, 23718 # 23719 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode 23720 # 23721 ti916-132|Texas Instruments 916 VDT VT220 132 column, 23722 cols#132, use=ti916, 23723 # 23724 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode 23725 # 23726 ti916-8-132|Texas Instruments 916 VDT 8-bit VT220 132 column, 23727 cols#132, use=ti916-8, 23728 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL, 23729 OTbs, am, xon, 23730 cols#80, it#8, lines#24, 23731 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r, 23732 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 23733 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 23734 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 23735 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 23736 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ, 23737 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~, 23738 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m, 23739 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 23740 smul=\E[4m, tbc=\E[3g, use=vt220+cvis, 23741 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL, 23742 am, xon, 23743 cols#80, it#8, lines#24, 23744 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r, 23745 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 23746 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 23747 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 23748 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 23749 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q, 23750 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~, 23751 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8, 23752 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, 23753 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+cvis, 23754 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode, 23755 cols#132, use=ti924, 23756 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode, 23757 cols#132, use=ti924-8, 23758 ti931|Texas Instruments 931 VDT, 23759 OTbs, am, xon, 23760 cols#80, lines#24, 23761 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED, 23762 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 23763 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, 23764 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H, 23765 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC, 23766 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3, 23767 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9, 23768 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@, 23769 sgr0=\E4@, smso=\E4A, smul=\E4D, 23770 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL, 23771 csr@, ind=\E[1S, ri=\E[1T, use=ti924, 23772 # (ti926-8: I corrected this from the broken SCO entry -- esr) 23773 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL, 23774 csr@, ind=\2331S, ri=\2331T, use=ti924-8, 23775 ti_ansi|basic entry for ti928, 23776 am, bce, eo, xenl, xon, 23777 colors#8, cols#80, it#8, lines#25, pairs#64, 23778 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, 23779 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, 23780 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 23781 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 23782 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B, 23783 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M, 23784 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, 23785 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I, 23786 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m, 23787 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, 23788 smso=\E[7m, smul=\E[4m, 23789 # 23790 # 928 VDT 7 bit control mode 23791 # 23792 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL, 23793 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~, 23794 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, 23795 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, 23796 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 23797 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi, 23798 # 23799 # 928 VDT 8 bit control mode 23800 # 23801 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL, 23802 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~, 23803 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~, 23804 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~, 23805 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, 23806 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S, 23807 kpp=\233T, kprt=\23335~, use=ti_ansi, 23808 23809 #### Zentec (zen) 23810 # 23811 23812 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally 23813 # had just <smso>=\EG6 which I think means standout was supposed to be 23814 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and 23815 # <invis> might work-- esr) 23816 zen30|z30|Zentec 30, 23817 OTbs, am, mir, ul, 23818 cols#80, lines#24, 23819 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 23820 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 23821 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^, 23822 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6, 23823 smul@, use=adm+sgr, 23824 # (zen50: this had extension capabilities 23825 # :BS=^U:CL=^V:CR=^B: 23826 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh, 23827 # which were also in the original entry -- esr) 23828 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr) 23829 zen50|z50|Zentec Zephyr, 23830 OTbs, am, 23831 cols#80, lines#24, xmc#1, 23832 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 23833 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE, 23834 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, 23835 rmul@, smul@, use=adm+sgr, 23836 23837 # CCI 4574 (Office Power) from Will Martin <wmartin (at] BRL.ARPA> via BRL 23838 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001, 23839 OTbs, am, bw, 23840 cols#80, lines#24, 23841 blink=\EM", clear=\EH\EJ, cnorm=\EP, 23842 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n, 23843 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 23844 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH, 23845 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED, 23846 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R, 23847 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s, 23848 smso=\EM$, smul=\EM0, 23849 23850 ######## OBSOLETE UNIX CONSOLES 23851 # 23852 23853 #### Apollo consoles 23854 # 23855 # Apollo got bought by Hewlett-Packard. The Apollo workstations are 23856 # labeled HP700s now. 23857 # 23858 23859 # From: Gary Darland <goodmanc (at] garnet.berkeley.edu> 23860 apollo|Apollo console, 23861 OTbs, am, mir, 23862 cols#88, lines#53, 23863 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC, 23864 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL, 23865 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED, 23866 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ, 23867 smso=\ES, smul=\EU, vpa=\EO+\s, 23868 23869 # We don't know whether or not the apollo guys replicated DEC's firmware bug 23870 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable 23871 # both these capabilities. 23872 apollo+vt132|Apollo console emulating VT132, 23873 rmir@, smir@, use=vt132, 23874 23875 apollo_15P|Apollo 15 inch display, 23876 use=apollo+vt132, 23877 apollo_19L|Apollo 19 inch display, 23878 use=apollo+vt132, 23879 apollo_color|Apollo color display, 23880 use=apollo+vt132, 23881 23882 #### AT&T consoles 23883 23884 # This actually describes the generic SVr4 display driver for Intel boxes. 23885 # The <dim=\E[2m> isn't documented and therefore may not be reliable. 23886 # From: Eric Raymond <esr (at] snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995 23887 att6386|at386|386at|AT&T WGS 6386 console, 23888 am, bw, eo, xon, 23889 cols#80, it#8, lines#25, 23890 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 23891 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, 23892 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD, 23893 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 23894 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 23895 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 23896 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 23897 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 23898 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m, 23899 is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B, 23900 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP, 23901 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, 23902 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, 23903 khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0, 23904 nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m, 23905 rmso=\E[m, rmul=\E[m, sc=\E7, 23906 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t; 23907 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, 23908 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 23909 tbc=\E[3g, vpa=\E[%i%p1%dd, use=ecma+index, 23910 use=klone+color, 23911 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) 23912 pc6300plus|AT&T 6300 plus, 23913 OTbs, am, xon, 23914 cols#80, lines#24, 23915 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, 23916 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B, 23917 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 23918 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 23919 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n, 23920 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 23921 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, 23922 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 23923 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 23924 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 23925 23926 # From: Benjamin C. W. Sittler <bsittler (at] nmt.edu> 23927 # 23928 # I have a UNIX PC which I use as a terminal attached to my Linux PC. 23929 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses 23930 # is broken. All the special key sequences are broken, making it unusable 23931 # with Emacs. The problem stems from the following: 23932 # 23933 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric 23934 # keypad!), loadable fonts, and strange highlighting modes ("dithered" 23935 # half-intensity, "smeared" bold, and real strike-out, for example.) It also 23936 # uses resizable terminal windows, but the bundled terminal program always 23937 # uses an 80x24 window (and doesn't support seem to support a 132-column 23938 # mode.) 23939 # 23940 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a 23941 # library which was a superset of SVr3.5 curses (called tam, for "terminal 23942 # access method".) tam includes support for real, overlapping windows, 23943 # onscreen function key labels, and bitmap graphics. But since the primary 23944 # user interface on the UNIX PC was a GUI program (ua, for "user 23945 # assistant",) and remote administration was considered important for the 23946 # machine, tam also supported VT100-compatible terminals attached to the 23947 # serial port or used across the StarLan network. To simulate the extra keys 23948 # not present on a VT100, users could press ESC and a two-letter sequence, 23949 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, 23950 # however, were not the same as those sent by the actual Undo key. The 23951 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. 23952 # (If you're interested in adding some of the tam calls to ncurses, btw, I 23953 # have the full documentation and several programs which use tam. It also 23954 # used an extended terminfo format to describe key sequences, special 23955 # highlighting modes, etc.) 23956 # 23957 # KEYS: This means that ncurses would quite painful on the UNIX PC, since 23958 # there are two sequences for every key-modifier combination (local keyboard 23959 # sequence and remote "VT100" sequence.) But I doubt many people are trying 23960 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the 23961 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 23962 # seem to have been built from the manual describing the VT100 sequences. 23963 # This means it doesn't work for a real live UNIX PC. 23964 # 23965 # FONTS: The UNIX PC also has a strange interpretation of "alternate 23966 # character set". Rather than the VT100 graphics you might expect, it allows 23967 # up to 8 custom fonts to be loaded at any given time. This means that 23968 # programs expecting VT100 graphics will usually be disappointed. For this 23969 # reason I have disabled the smacs/rmacs sequences, but they could easily be 23970 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 23971 # manpage), should you wish to do so: 23972 # 23973 # SGR10 - Select font 0 - ESC [ 10 m or SO 23974 # SGR11 - Select font 1 - ESC [ 11 m or SI 23975 # SGR12 - Select font 2 - ESC [ 12 m 23976 # ... (etc.) 23977 # SGR17 - Select font 7 - ESC [ 17 m 23978 # 23979 # Graphics for line drawing are not reliably found at *any* character 23980 # location because the UNIX PC has dynamically reloadable fonts. I use font 23981 # 0 for regular text and font 1 for italics, but this is by no means 23982 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled. 23983 # 23984 # MISC: The cursor visible/cursor invisible sequences were swapped in the 23985 # distributed terminfo. 23986 # 23987 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote 23988 # the UNIX PC terminfo entry. The modified version works great with Lynx, 23989 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC 23990 # attached by serial cable. In Emacs, even the Undo key works, and many 23991 # applications can now use the F1-F8 keys. 23992 # 23993 # esr's notes: 23994 # Terminfo entry for the AT&T Unix PC 7300 23995 # from escape(7) in Unix PC 7300 Manual. 23996 # Somewhat similar to a vt100-am (but different enough 23997 # to redo this from scratch.) 23998 # 23999 # /*************************************************************** 24000 # * 24001 # * FONT LOADING PROGRAM FOR THE UNIX PC 24002 # * 24003 # * This routine loads a font defined in the file ALTFONT 24004 # * into font memory slot #1. Once the font has been loaded, 24005 # * it can be used as an alternative character set. 24006 # * 24007 # * The call to ioctl with the argument WIOCLFONT is the key 24008 # * to this routine. For more information, see window(7) in 24009 # * the PC 7300 documentation. 24010 # ***************************************************************/ 24011 # #include <string.h> /* needed for strcpy call */ 24012 # #include <sys/window.h> /* needed for ioctl call */ 24013 # #define FNSIZE 60 /* font name size */ 24014 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ 24015 # /* 24016 # * The file /usr/lib/wfont/special.8.ft comes with the 24017 # * standard PC software. It defines a graphics character set 24018 # * similar to that of the Teletype 5425 terminal. To view 24019 # * this or other fonts in /usr/lib/wfont, use the command 24020 # * cfont <filename>. For further information on fonts see 24021 # * cfont(1) in the PC 7300 documentation. 24022 # */ 24023 # 24024 # struct altfdata /* structure for alt font data */ 24025 # { 24026 # short altf_slot; /* memory slot number */ 24027 # char altf_name[FNSIZE]; /* font name (file name) */ 24028 # }; 24029 # ldfont() 24030 # { 24031 # int wd; /* window in which altfont will be */ 24032 # struct altfdata altf; 24033 # altf.altf_slot=1; 24034 # strcpy(altf.altf_name,ALTFONT); 24035 # for (wd =1; wd < 12; wd++) { 24036 # ioctl(wd, WIOCLFONT,&altf); 24037 # } 24038 # } 24039 # 24040 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry, 24041 # they're confirmed by the man page for the System V display---esr) 24042 # 24043 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 24044 am, xon, 24045 cols#80, it#8, lines#24, 24046 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 24047 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, 24048 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 24049 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 24050 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 24051 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 24052 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 24053 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 24054 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 24055 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 24056 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 24057 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 24058 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 24059 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 24060 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 24061 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 24062 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 24063 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 24064 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 24065 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 24066 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 24067 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 24068 smul=\E[4m, 24069 24070 #### Convergent Technology 24071 # 24072 # Burroughs bought Convergent shortly before it merged with Univac. 24073 # CTOS is (I believe) dead. Probably the aws is too (this entry dates 24074 # from 1991 or earlier). 24075 # 24076 24077 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL 24078 # (aws: removed unknown :dn=^K: -- esr) 24079 aws|Convergent Technologies AWS workstation under UTX and Xenix, 24080 am, 24081 OTug#0, cols#80, lines#28, xmc#0, 24082 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=, 24083 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, 24084 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c, 24085 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K, 24086 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF, 24087 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN, 24088 vpa=\EV%p1%c, 24089 awsc|Convergent Technologies AWS workstation under CTOS, 24090 am, 24091 OTug#0, cols#80, lines#24, xmc#0, 24092 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L, 24093 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF, 24094 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, 24095 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE, 24096 smul=\EAC, 24097 24098 #### DEC consoles 24099 # 24100 24101 # The MicroVax console. Tim Theisen <tim (at] cs.wisc.edu> writes: 24102 # The digital uVax II's had a graphic display called a qdss. It was 24103 # supposed to be a high performance graphic accelerator, but it was 24104 # late to market and barely appeared before faster dumb frame buffers 24105 # appeared. I have only used this display while running X11. However, 24106 # during bootup, it was in text mode, and probably had a terminal emulator 24107 # within it. And that is what your termcap entry is for. In graphics 24108 # mode the screen size is 1024x864 pixels. 24109 qdss|qdcons|qdss glass tty, 24110 OTbs, am, 24111 cols#128, lines#57, 24112 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L, 24113 cup=\E=%p1%c%p2%c, cuu1=^K, 24114 24115 #### Fortune Systems consoles 24116 # 24117 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty 24118 # in their day; I (esr) used one myself for a year or so around 1984. 24119 # They had no graphics, though, and couldn't compete against Suns and 24120 # the like. R.I.P. 24121 # 24122 24123 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983 24124 # (This had extension capabilities 24125 # :rv=\EH:re=\EI:rg=0:GG=0:\ 24126 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\ 24127 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\ 24128 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F: 24129 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had 24130 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily) 24131 # to force both magic cookie glitches off. Once upon a time, I 24132 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are 24133 # function keys; thus the "Al" value for HM was certainly an error. I renamed 24134 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. 24135 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent 24136 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard 24137 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) 24138 fos|fortune|Fortune system, 24139 OTbs, am, bw, 24140 cols#80, lines#25, 24141 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E], 24142 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>, 24143 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>, 24144 cvvis=\E:, dch1=\034W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>, 24145 el=^\Z, home=\036$<10>, ht=^Z, ich1=\034Q$<5>, 24146 il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H, kcub1=^Aw\r, 24147 kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, kend=^Ak\r, 24148 kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, kf4=^Ad\r, 24149 kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, khome=^A?\r, 24150 knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH, rmacs=^O, rmso=^\I`, 24151 rmul=^\IP, sgr0=\EI, smacs=\Eo, smso=^\H`, smul=^\HP, 24152 24153 #### Masscomp consoles 24154 # 24155 # Masscomp has gone out of business. Their product line was purchased by a 24156 # company in Georgia (US) called "XS International", parts and service may 24157 # still be available through them. 24158 # 24159 24160 # (masscomp: ":MT:" changed to ":km:"; -- esr) 24161 masscomp|masscomp workstation console, 24162 OTbs, km, mir, 24163 cols#80, it#8, lines#24, 24164 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 24165 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 24166 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H, 24167 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, 24168 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu, 24169 masscomp1|masscomp large screen version 1, 24170 cols#104, lines#36, use=masscomp, 24171 masscomp2|masscomp large screen version 2, 24172 cols#64, lines#21, use=masscomp, 24173 24174 #### OSF Unix 24175 # 24176 24177 # OSF/1 1.1 Snapshot 2 24178 pmcons|pmconsole|PMAX console, 24179 am, 24180 cols#128, lines#57, 24181 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I, 24182 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 24183 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 24184 24185 #### Other consoles 24186 # The following is a version of the ibm-pc entry distributed with PC/IX, 24187 # (Interactive Systems' System 3 for the Big Blue), modified by Richard 24188 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, 24189 # (the former is untrue, and the latter failed under UCB/man); standout and 24190 # underline modes have been added. Note: this entry describes the "native" 24191 # capabilities of the PC monochrome display, without ANY emulation; most 24192 # communications packages (but NOT PC/IX connect) do some kind of emulation. 24193 pcix|PC/IX console, 24194 am, bw, eo, 24195 cols#80, lines#24, 24196 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 24197 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 24198 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 24199 smul=\E[4m, 24200 24201 # (ibmpcx: this entry used to be known as ibmx. 24202 # It formerly included the following extension capabilities: 24203 # :GC=b:GL=v:GR=t:RT=^J:\ 24204 # :GH=\E[196g:GV=\E[179g:\ 24205 # :GU=\E[193g:GD=\E[194g:\ 24206 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ 24207 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ 24208 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ 24209 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate 24210 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match 24211 # what was there before. -- esr) 24212 ibmpcx|xenix|ibmx|IBM PC xenix console display, 24213 OTbs, am, msgr, 24214 cols#80, lines#25, 24215 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 24216 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 24217 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 24218 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 24219 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 24220 kpp=\E[Z, use=klone+acs, use=klone+sgr8, 24221 24222 ######## OTHER OBSOLETE TYPES 24223 # 24224 # These terminals are *long* dead -- these entries are retained for 24225 # historical interest only. 24226 # 24227 24228 #### Obsolete non-ANSI software emulations 24229 # 24230 24231 # CTRM terminal emulator 24232 # 1. underlining is not allowed with colors: first, is is simulated by 24233 # black on white, second, it disables background color manipulations. 24234 # 2. BLINKING, REVERSE and BOLD are allowed with colors, 24235 # so we have to save their status in the static registers A, B and H 24236 # respectively, to be able to restore them when color changes 24237 # (because any color change turns off ALL attributes) 24238 # 3. <bold> and <rev> sequences alternate modes, 24239 # rather than simply entering them. Thus we have to check the 24240 # static register B and H to determine the status, before sending the 24241 # escape sequence. 24242 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero 24243 # and then reset colors 24244 # 5. implementation of the protect mode would badly penalize the performance. 24245 # we would have to use \E&bn sequence to turn off colors (as well as all 24246 # other attributes), and keep the status of protect mode in yet another 24247 # static variable. If someone really needs this mode, they would have to 24248 # create another terminfo entry. 24249 # 6. original color-pair is white on black. 24250 # store the information about colors into static registers 24251 # 7. set foreground color. it performs the following steps. 24252 # 1) turn off all attributes 24253 # 2) turn on the background and video attributes that have been turned 24254 # on before (this information is stored in static registers X,Y,Z,A,B,H,D). 24255 # 3) turn on foreground attributes 24256 # 4) store information about foreground into U,V,W static registers 24257 # 8. turn on background: similar to turn on foreground above 24258 ctrm|C terminal emulator, 24259 am, bce, xon, 24260 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0, 24261 pairs#63, pb#19200, vt#6, 24262 bel=^G, blink=\E&dA%{1}%PA, 24263 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei, 24264 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 24265 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM, 24266 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1, 24267 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r, 24268 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, 24269 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, 24270 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r, 24271 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV 24272 %{1}%PU, 24273 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA, 24274 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t 24275 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb 24276 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1 24277 %{4}%&%t\E&br%{1}%e%{0}%;%PX, 24278 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t 24279 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB 24280 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1 24281 %{4}%&%t\E&bR%{1}%e%{0}%;%PU, 24282 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB 24283 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2 24284 %t\E&dD%;, 24285 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB, 24286 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 24287 24288 # gs6300 - can't use blue foreground, it clashes with underline; 24289 # it's simulated with cyan 24290 # Bug: The <op> capability probably resets attributes. 24291 # (gs6300: commented out <rmln> (no <smln>) --esr) 24292 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator, 24293 am, bce, msgr, xon, 24294 colors#8, cols#80, it#8, lines#24, pairs#63, 24295 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz 24296 z{{||}}~~, 24297 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r, 24298 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n, 24299 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 24300 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 24301 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 24302 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, 24303 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B, 24304 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, 24305 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, 24306 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m, 24307 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm, 24308 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m, 24309 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m, 24310 24311 # From: <earle (at] smeagol.UUCP> 29 Oct 85 05:40:18 GMT 24312 # MS-Kermit with Heath-19 emulation mode enabled 24313 # (h19k: changed ":pt@:" to ":it@" 24314 h19k|h19kermit|Heathkit emulation provided by Kermit (no auto margin), 24315 am@, da, db, xt, 24316 it@, 24317 ht@, use=h19-u, 24318 24319 # Apple Macintosh with VersaTerm, a terminal emulator distributed by Synergy 24320 # Software (formerly Peripherals Computers & Supplies, Inc) of 24321 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can 24322 # also be reached at support (at] synergy.com. 24323 versaterm|VersaTerm VT100 emulator for the Macintosh, 24324 am, xenl, 24325 cols#80, it#8, lines#24, 24326 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 24327 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr, 24328 cub1=^H, cud1=\n, cuf1=\E[C$<2/>, 24329 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 24330 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>, 24331 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>, 24332 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, 24333 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 24334 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, 24335 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 24336 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>, 24337 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>, 24338 smul=\E[4m$<2/>, 24339 24340 # From: Rick Thomas <ihnp4!btlunix!rbt> 24341 # (xtalk: I added <rmam>/<smam> based on the init string. 24342 xtalk|IBM PC with xtalk communication program (versions up to 3.4), 24343 am, mir, msgr, xon, 24344 cols#80, it#8, lines#24, vt#3, xmc#1, 24345 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 24346 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H, 24347 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>, 24348 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 24349 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>, 24350 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, 24351 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, 24352 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 24353 rmkx=\E[?1l\E>, rmso=\E[m\s, 24354 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m, 24355 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s, 24356 tbc=\E[3g, use=vt100+fnkeys, 24357 24358 # The official PC terminal emulator program of the AT&T Product Centers. 24359 # Note - insert mode commented out - doesn't seem to work on AT&T PC. 24360 simterm|attpc running simterm, 24361 am, 24362 cols#80, lines#24, 24363 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC, 24364 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER, 24365 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE, 24366 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB, 24367 24368 #### Daisy wheel printers 24369 # 24370 # This section collects Diablo, DTC, Xerox, Qume, and other daisy 24371 # wheel terminals. These are now largely obsolete. 24372 # 24373 24374 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr) 24375 diablo1620|diablo1720|diablo450|ipsi|Diablo 1620, 24376 hc, os, 24377 cols#132, it#8, 24378 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c, 24379 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2, 24380 diablo1620-m8|diablo1640-m8|Diablo 1620 w/8 column left margin, 24381 cols#124, 24382 is2=\r \E9, use=diablo1620, 24383 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr) 24384 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|Diablo 1640, 24385 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, 24386 use=diablo1620, 24387 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such 24388 # file -- esr) 24389 diablo1640-lm|diablo-lm|xerox-lm|Diablo 1640 with indented left margin, 24390 cols#124, 24391 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620, 24392 diablo1740-lm|630-lm|1730-lm|x1700-lm|Diablo 1740 printer, 24393 use=diablo1640-lm, 24394 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout 24395 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>. 24396 # The terminal has tabs, but I'm getting tired of fighting the braindamage. 24397 # If no tab is set or the terminal's in a bad mood, it glitches the screen 24398 # around all of memory. Note that return puts a blank ("a return character") 24399 # in the space the cursor was at, so we use ^P return (and thus ^P newline for 24400 # newline). Note also that if you turn off :pt: and let Unix expand tabs, 24401 # curses won't work (some old BSD versions) because it doesn't clear this bit, 24402 # and cursor addressing sends a tab for row/column 9. What a losing terminal! 24403 # I have been unable to get tabs set in all 96 lines - it always leaves at 24404 # least one line with no tabs in it, and once you tab through that line, 24405 # it completely weirds out. 24406 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr) 24407 dtc382|DTC 382, 24408 am, da, db, xhp, 24409 cols#80, lines#24, lm#96, 24410 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H, 24411 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB, 24412 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R, 24413 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0, 24414 smcup=\020\035$<20>, smir=^PI, smul=^P ^P, 24415 dtc300s|DTC 300s, 24416 hc, os, 24417 cols#132, 24418 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 24419 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3, 24420 gsi|mystery gsi terminal, 24421 hc, os, 24422 cols#132, 24423 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH, 24424 ind=\n, 24425 aj830|aj832|aj|Anderson Jacobson, 24426 hc, os, 24427 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8, 24428 ind=\n, 24429 # From: Chris Torek <chris (at] gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST 24430 aj510|Anderson-Jacobson model 510, 24431 am, mir, 24432 cols#80, lines#24, 24433 clear=^L, cub1=^H, cuf1=\EX, 24434 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY, 24435 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=, 24436 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ, 24437 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J, 24438 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I, 24439 smul=\E"U, 24440 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 24441 # This is incomplete, but it's a start. 24442 nec5520|nec|spinwriter|NEC 5520, 24443 hc, os, 24444 cols#132, it#8, 24445 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L, 24446 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n, 24447 kbs=^H, tbc=\E3, 24448 qume5|qume|Qume Sprint 5, 24449 hc, os, 24450 cols#80, it#8, 24451 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 24452 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3, 24453 # I suspect the Xerox 1720 is the same as the Diablo 1620. 24454 xerox1720|x1720|x1750|Xerox 1720, 24455 hc, os, 24456 cols#132, it#8, 24457 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n, 24458 tbc=\E2, 24459 24460 #### Miscellaneous obsolete terminals, manufacturers unknown 24461 # 24462 # If you have any information about these (like, a manufacturer's name, 24463 # and a date on the serial-number plate) please send it! 24464 24465 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars, 24466 OTbs, am, 24467 cols#73, lines#36, 24468 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, 24469 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars, 24470 OTbs, am, 24471 cols#85, lines#39, 24472 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3, 24473 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7, 24474 kf4=\E8, rmso=\Em^C, smso=\Em^L, 24475 cops10|cops|cops-10|cops 10, 24476 am, bw, 24477 cols#80, lines#24, 24478 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L, 24479 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V, 24480 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, 24481 khome=^Y, 24482 24483 # http://www.bitsavers.org/pdf/datapro/alphanumeric_terminals/Datapro_C25_Datagraphix.pdf 24484 # 24485 # DatagraphiX, Inc. 24486 # (a subsidiary of General Dynamics), 24487 # P.O. Box 82449, San Diego, California 92138. 24488 # 24489 # (d132: removed duplicate :ic=\E5:, 24490 # merged in capabilities from a BRL entry -- esr) 24491 d132|datagraphix|DatagraphiX 132a, 24492 da, db, in, 24493 cols#80, lines#30, 24494 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n, 24495 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex, 24496 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H, 24497 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew, 24498 # The d800 was an early portable terminal from c.1984-85 that looked a lot 24499 # like the original Compaq `lunchbox' portable (but no handle). It had a VT220 24500 # mode (which is what this entry looks like) and several other lesser-known 24501 # emulations. 24502 d800|Direct 800/A, 24503 OTbs, am, da, db, msgr, xhp, 24504 cols#80, it#8, lines#24, 24505 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 24506 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H, 24507 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 24508 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D, 24509 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 24510 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 24511 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 24512 smacs=\E[1m, smso=\E[7m, smul=\E[4m, 24513 digilog|digilog 333, 24514 OTbs, 24515 cols#80, lines#16, 24516 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X, 24517 home=^N, ind=\n, 24518 # The DWK was a terminal manufactured in the Soviet Union c.1986 24519 dwk|dwk-vt|dwk terminal, 24520 am, 24521 cols#80, it#8, lines#24, 24522 acsc=+\^\,Q-S.M0\177`+a:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~ 24523 _, 24524 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, 24525 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 24526 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?, 24527 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee, 24528 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5, 24529 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh, 24530 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX, 24531 sgr0=\EX, smacs=\EF, smso=\ET, 24532 env230|envision230|envision 230 graphics terminal, 24533 xenl@, 24534 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@, 24535 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t; 24536 1%;m$<2>, 24537 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd, 24538 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic 24539 # coupler attached, the whole rig fitting in a suitcase and more or less 24540 # portable. Hot stuff for c.1977 :-) -- esr 24541 ep48|ep4080|execuport 4080, 24542 OTbs, am, os, 24543 cols#80, 24544 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n, 24545 ep40|ep4000|execuport 4000, 24546 cols#136, use=ep4080, 24547 # Adam Thompson <athompso (at] pangea.ca> tells us: 24548 # Informer series - these are all portable units, resembling older 24549 # automatic bread-baking machines. The terminal looks like a `clamshell' 24550 # design, but isn't. The structure is similar to the Direct terminals, 24551 # but only half the width. The entire unit is only about 10" wide. 24552 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6" 24553 # keyboard. All the keys are crammed together, much like some laptop 24554 # PCs today, but perhaps less well organized...all these units have a 24555 # bewildering array of plugs on the back, including a built-in modem. 24556 # The 305 was a color version of the 304; the 306 and 307 were mono and 24557 # color terminals built for IBM bisync protocols. 24558 # From: Paul Leondis <unllab (at] amber.berkeley.edu> 24559 ifmr|Informer D304, 24560 OTbs, am, 24561 cols#80, lines#24, 24562 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC, 24563 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\, 24564 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK, 24565 smso=\EJ, 24566 # Entry largely based on wy60 and has the features of wy60ak. 24567 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys, 24568 am, bw, hs, km, mir, msgr, ul, xon, 24569 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80, 24570 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 24571 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r, 24572 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K, 24573 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r, 24574 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>, 24575 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n, 24576 ip=$<3>, 24577 is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B 24578 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F 24579 \177\EA1*\EZH12, 24580 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B, 24581 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY, 24582 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r, 24583 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 24584 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 24585 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 24586 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 24587 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>, 24588 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 24589 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 24590 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 24591 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11, 24592 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>, 24593 rs3=\EwG\Ee($<150>, 24594 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2 24595 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%| 24596 %t%{64}%|%;%?%p7%t%{1}%|%;%c, 24597 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/, 24598 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177 24599 \Ezz<\E[Q\177, 24600 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(, 24601 uc=\EG8\EG0, use=adm+sgr, 24602 teletec|Teletec Datascreen, 24603 OTbs, am, 24604 cols#80, lines#24, 24605 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K, 24606 home=^^, ind=\n, 24607 # From: Mark Dornfeld <romwa (at] ucbvax.berkeley.edu> 24608 # This description is for the LANPAR Technologies VISION 3220 24609 # terminal from 1984/85. The function key definitions k0-k5 represent the 24610 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, 24611 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys. 24612 # 24613 # Kenneth Randell <kenr (at] datametrics.com> writes on 31 Dec 1998: 24614 # I had a couple of scopes (3221) like this once where I used to work, around 24615 # the 1987 time frame if memory serves me correctly. These scopes were made 24616 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 24617 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221 24618 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 24619 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals 24620 # (3221) cost about $1500 each, and one was always broken -- had to be sent 24621 # back to the shop for repairs. 24622 # The only real advantage these scopes had over the VT-240's were: 24623 # 1) They were faster in the Regis display, or at least the ones I did 24624 # 2) They had a handy debugging feature where you could split-screen the 24625 # scope, the graphics would appear on the top, and the REGIS commands would 24626 # appear on the bottom. I don't remember the VT-240s being able to do that. 24627 # I would swear that LANPAR Technologies was in MA someplace, but since I 24628 # don't work at the same place anymore, and those terminals and manuals were 24629 # long since junked, I cannot be any more sure than that. 24630 # 24631 # (v3220: removed obsolete ":kn#10:", 24632 # I added <rmam>/<smam> based on the init string -- esr) 24633 v3220|LANPAR Vision II model 3220/3221/3222, 24634 OTbs, am, mir, xenl, 24635 cols#80, it#8, lines#24, 24636 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C, 24637 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 24638 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, 24639 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B, 24640 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~, 24641 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ, 24642 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l, 24643 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 24644 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 24645 ######## ICH/ICH1 VERSUS RMIR/SMIR 24646 # 24647 # Some non-curses applications get confused if both ich/ich1 and rmir/smir 24648 # are present; the symptom is doubled characters in an update using insert. 24649 # These applications are technically correct; in both 4.3BSD termcap and 24650 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir 24651 # unless the terminal needs both. To my knowledge, no terminal still in this 24652 # file requires both other than the very obsolete dm2500. 24653 # 24654 # For ncurses-based applications this is not a problem, as ncurses uses 24655 # one or the other as appropriate but never mixes the two. Therefore we 24656 # have not corrected entries like `linux' and `xterm' that specify both. 24657 # If you see doubled characters from these, use the linux-nic and xterm-nic 24658 # entries that suppress ich/ich1. And upgrade to ncurses! 24659 # 24660 24661 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS 24662 # 24663 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and 24664 # ECMA-48 standards are said to be almost identical, but are not the same 24665 # as X3.64 (though for practical purposes they are close supersets of it). 24666 # 24667 # You can obtain ECMA-48 for free by sending email to helpdesk (at] ecma.ch 24668 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for 24669 # Coded Character Sets"), include your snail-mail address, and you should 24670 # receive the document in due course. Don't expect an email acknowledgment. 24671 # 24672 # Related standards include "X3.4-1977: American National Standard Code for 24673 # Information Interchange" (the ASCII standard) and "X3.41.1974: 24674 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of 24675 # American National Standard for Information Interchange." I believe (but 24676 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35 24677 # respectively. 24678 # 24679 24680 #### VT100/ANSI/ECMA-48 24681 # 24682 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals 24683 # and ECMA-48 Control Functions for Coded Character Sets. 24684 # 24685 # Much of the content of this comment is adapted from a table prepared by 24686 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences, 24687 # discussion of some terminfo-related issues, and updates to capture ECMA-48 24688 # have been added. Control functions described in ECMA-48 only are tagged 24689 # with * after their names. 24690 # 24691 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control 24692 # sequences. In the main table, \E stands for an escape (\033) character, 24693 # SPC for space. Pn stands for a single numeric parameter to be inserted 24694 # in decimal ASCII. Ps stands for a list of such parameters separated by 24695 # semicolons. Parameter meanings for most parameterized sequences are 24696 # described in the notes. 24697 # 24698 # Sequence Sequence Parameter or 24699 # Mnemonic Name Sequence Value Mode terminfo 24700 # ----------------------------------------------------------------------------- 24701 # APC Applicatn Program Command \E _ - Delim - 24702 # BEL Bell * ^G - - bel 24703 # BPH Break Permitted Here * \E B - * - 24704 # BS BackSpace * ^H - EF - 24705 # CAN Cancel * ^X - - - (A) 24706 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt 24707 # CCH Cancel Previous Character \E T - - - 24708 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B) 24709 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C) 24710 # CMD Coding Method Delimiter * \E 24711 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D) 24712 # CPL Cursor Preceding Line \E [ Pn F 1 eF - 24713 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E) 24714 # CSI Control Sequence Intro \E [ - Intro - 24715 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F) 24716 # CUB Cursor Backward \E [ Pn D 1 eF cub 24717 # CUD Cursor Down \E [ Pn B 1 eF cud 24718 # CUF Cursor Forward \E [ Pn C 1 eF cuf 24719 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G) 24720 # CUU Cursor Up \E [ Pn A 1 eF cuu 24721 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H) 24722 # DA Device Attributes \E [ Pn c 0 - - 24723 # DAQ Define Area Qualification \E [ Ps o 0 - - 24724 # DCH Delete Character \E [ Pn P 1 eF dch 24725 # DCS Device Control String \E P - Delim - 24726 # DL Delete Line \E [ Pn M 1 eF dl 24727 # DLE Data Link Escape * ^P - - - 24728 # DMI Disable Manual Input \E \ - Fs - 24729 # DSR Device Status Report \E [ Ps n 0 - - (I) 24730 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC - 24731 # EA Erase in Area \E [ Ps O 0 eF - (J) 24732 # ECH Erase Character \E [ Pn X 1 eF ech 24733 # ED Erase in Display \E [ Ps J 0 eF ed (J) 24734 # EF Erase in Field \E [ Ps N 0 eF - 24735 # EL Erase in Line \E [ Ps K 0 eF el (J) 24736 # EM End of Medium * ^Y - - - 24737 # EMI Enable Manual Input \E b Fs - 24738 # ENQ Enquire ^E - - - 24739 # EOT End Of Transmission ^D - * - 24740 # EPA End of Protected Area \E W - - - (K) 24741 # ESA End of Selected Area \E G - - - 24742 # ESC Escape ^[ - - - 24743 # ETB End Transmission Block ^W - - - 24744 # ETX End of Text ^C - - - 24745 # FF Form Feed ^L - - - 24746 # FNK Function Key * \E [ Pn SPC W - - - 24747 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - - 24748 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE - 24749 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L) 24750 # GSS Graphic Size Selection \E [ Pn SPC C none FE - 24751 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B) 24752 # HPB Char Position Backward \E [ j 1 FE - 24753 # HPR Horz Position Relative \E [ Pn a 1 FE - (M) 24754 # HT Horizontal Tab * ^I - FE - (N) 24755 # HTJ Horz Tab w/Justification \E I - FE - 24756 # HTS Horizontal Tab Set \E H - FE hts 24757 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G) 24758 # ICH Insert Character \E [ Pn @ 1 eF ich 24759 # IDCS ID Device Control String \E [ SPC O - * - 24760 # IGS ID Graphic Subrepertoire \E [ SPC M - * - 24761 # IL Insert Line \E [ Pn L 1 eF il 24762 # IND Index \E D - FE - 24763 # INT Interrupt \E a - Fs - 24764 # JFY Justify \E [ Ps SPC F 0 FE - 24765 # IS1 Info Separator #1 * ^_ - * - 24766 # IS2 Info Separator #1 * ^^ - * - 24767 # IS3 Info Separator #1 * ^] - * - 24768 # IS4 Info Separator #1 * ^\ - * - 24769 # LF Line Feed ^J - - - 24770 # LS1R Locking Shift Right 1 * \E ~ - - - 24771 # LS2 Locking Shift 2 * \E n - - - 24772 # LS2R Locking Shift Right 2 * \E } - - - 24773 # LS3 Locking Shift 3 * \E o - - - 24774 # LS3R Locking Shift Right 3 * \E | - - - 24775 # MC Media Copy \E [ Ps i 0 - - (S) 24776 # MW Message Waiting \E U - - - 24777 # NAK Negative Acknowledge * ^U - * - 24778 # NBH No Break Here * \E C - - - 24779 # NEL Next Line \E E - FE nel (D) 24780 # NP Next Page \E [ Pn U 1 eF - 24781 # NUL Null * ^@ - - - 24782 # OSC Operating System Command \E ] - Delim - 24783 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - - 24784 # PFS Page Format Selection * \E Pn SPC J 0 - - 24785 # PLD Partial Line Down \E K - FE - (T) 24786 # PLU Partial Line Up \E L - FE - (U) 24787 # PM Privacy Message \E ^ - Delim - 24788 # PP Preceding Page \E [ Pn V 1 eF - 24789 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE - 24790 # PPB Page Position Backward * \E [ Pn SPC R 1 FE - 24791 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE - 24792 # PTX Parallel Texts * \E [ \ - - - 24793 # PU1 Private Use 1 \E Q - - - 24794 # PU2 Private Use 2 \E R - - - 24795 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE - 24796 # REP Repeat Char or Control \E [ Pn b 1 - rep 24797 # RI Reverse Index \E M - FE - (V) 24798 # RIS Reset to Initial State \E c - Fs - 24799 # RM Reset Mode * \E [ Ps l - - - (W) 24800 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - - 24801 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X) 24802 # SCI Single-Char Introducer \E Z - - - 24803 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - - 24804 # SCS Set Char. Spacing * \E [ Pn SPC g - - - 24805 # SD Scroll Down \E [ Pn T 1 eF rin 24806 # SDS Start Directed String * \E [ Pn ] 1 - - 24807 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y) 24808 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - - 24809 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O) 24810 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - - 24811 # SI Shift In ^O - - - (P) 24812 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - - 24813 # SL Scroll Left \E [ Pn SPC @ 1 eF - 24814 # SLH Set Line Home * \E [ Pn SPC U - - - 24815 # SLL Set Line Limit * \E [ Pn SPC V - - - 24816 # SLS Set Line Spacing * \E [ Pn SPC h - - - 24817 # SM Select Mode \E [ Ps h none - - (W) 24818 # SO Shift Out ^N - - - (Q) 24819 # SOH Start Of Heading * ^A - - - 24820 # SOS Start of String * \E X - - - 24821 # SPA Start of Protected Area \E V - - - (Z) 24822 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - - 24823 # SPH Set Page Home * \E [ Ps SPC G - - - 24824 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE - 24825 # SPL Set Page Limit * \E [ Ps SPC j - - - 24826 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - - 24827 # SR Scroll Right \E [ Pn SPC A 1 eF - 24828 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - - 24829 # SRS Start Reversed String * \E [ Ps [ 0 - - 24830 # SSA Start of Selected Area \E F - - - 24831 # SSU Select Size Unit * \E [ Pn SPC I 0 - - 24832 # SSW Set Space Width * \E [ Pn SPC [ none - - 24833 # SS2 Single Shift 2 (G2 set) \E N - Intro - 24834 # SS3 Single Shift 3 (G3 set) \E O - Intro - 24835 # ST String Terminator \E \ - Delim - 24836 # STAB Selective Tabulation * \E [ Pn SPC ^ - - - 24837 # STS Set Transmit State \E S - - - 24838 # STX Start pf Text * ^B - - - 24839 # SU Scroll Up \E [ Pn S 1 eF indn 24840 # SUB Substitute * ^Z - - - 24841 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - - 24842 # SYN Synchronous Idle * ^F - - - 24843 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - - 24844 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - - 24845 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - - 24846 # TBC Tab Clear \E [ Ps g 0 FE tbc 24847 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - - 24848 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE - 24849 # TSS Thin Space Specification \E [ Pn SC E none FE - 24850 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa 24851 # VPB Line Position Backward * \E [ Pn k 1 FE - 24852 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R) 24853 # VT Vertical Tabulation * ^K - FE - 24854 # VTS Vertical Tabulation Set \E J - FE - 24855 # 24856 # --------------------------------------------------------------------------- 24857 # 24858 # Notes: 24859 # 24860 # Some control characters are listed in the ECMA-48 standard without 24861 # being assigned functions relevant to terminal control there (they 24862 # referred to other standards such as ISO 1745 or ECMA-35). They are listed 24863 # here anyway for completeness. 24864 # 24865 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation. 24866 # 24867 # (B) There seems to be some confusion abroad between CHA and HPA. Most 24868 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls 24869 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but 24870 # preserved the CHA abbreviation. 24871 # 24872 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I. 24873 # Occasionally (as on, for example, certain HP terminals) this has the HTJ 24874 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the 24875 # CHT abbreviation. 24876 # 24877 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE. 24878 # 24879 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR 24880 # abbreviation. 24881 # 24882 # (F) CTC parameter values: 24883 # 0 = set char tab, 24884 # 1 = set line tab, 24885 # 2 = clear char tab, 24886 # 3 = clear line tab, 24887 # 4 = clear all char tabs on current line, 24888 # 5 = clear all char tabs, 24889 # 6 = clear all line tabs. 24890 # 24891 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept 24892 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character 24893 # Position Absolute" but retains the HVP abbreviation. 24894 # 24895 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT 24896 # abbreviation. 24897 # 24898 # (I) DSR parameter values: 24899 # 0 = ready, 24900 # 1 = busy, 24901 # 2 = busy, will send DSR later, 24902 # 3 = malfunction, 24903 # 4 = malfunction, will send DSR later, 24904 # 5 = request DSR, 24905 # 6 = request CPR response. 24906 # 24907 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 24908 # 0 = clear to end, 24909 # 1 = clear from beginning, 24910 # 2 = clear. 24911 # 24912 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation. 24913 # 24914 # (L) The GSM parameters are vertical and horizontal parameters to scale by. 24915 # 24916 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals 24917 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character 24918 # Position Relative" but retains the HPR abbreviation. 24919 # 24920 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT 24921 # abbreviation. 24922 # 24923 # (O) SGR parameter values: 24924 # 0 = default mode (attributes off), 24925 # 1 = bold, 24926 # 2 = dim, 24927 # 3 = italicized, 24928 # 4 = underlined, 24929 # 5 = slow blink, 24930 # 6 = fast blink, 24931 # 7 = reverse video, 24932 # 8 = invisible, 24933 # 9 = crossed-out (marked for deletion), 24934 # 10 = primary font, 24935 # 10 + n (n in 1..9) = nth alternative font, 24936 # 20 = Fraktur, 24937 # 21 = double underline, 24938 # 22 = turn off 2, 24939 # 23 = turn off 3, 24940 # 24 = turn off 4, 24941 # 25 = turn off 5, 24942 # 26 = proportional spacing, 24943 # 27 = turn off 7, 24944 # 28 = turn off 8, 24945 # 29 = turn off 9, 24946 # 30 = black fg, 24947 # 31 = red fg, 24948 # 32 = green fg, 24949 # 33 = yellow fg, 24950 # 34 = blue fg, 24951 # 35 = magenta fg, 24952 # 36 = cyan fg, 24953 # 37 = white fg, 24954 # 38 = set fg color as in CCITT T.416, 24955 # 39 = set default fg color, 24956 # 40 = black bg 24957 # 41 = red bg, 24958 # 42 = green bg, 24959 # 43 = yellow bg, 24960 # 44 = blue bg, 24961 # 45 = magenta bg, 24962 # 46 = cyan bg, 24963 # 47 = white bg, 24964 # 48 = set bg color as in CCITT T.416, 24965 # 49 = set default bg color, 24966 # 50 = turn off 26, 24967 # 51 = framed, 24968 # 52 = encircled, 24969 # 53 = overlined, 24970 # 54 = turn off 51 & 52, 24971 # 55 = not overlined, 24972 # 56-59 = reserved, 24973 # 61-65 = variable highlights for ideograms. 24974 # 24975 # (P) SI is also called LSO, Locking Shift Zero. 24976 # 24977 # (Q) SI is also called LS1, Locking Shift One. 24978 # 24979 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals 24980 # use CUD for this function and ignore VPR. ECMA calls it `Line Position 24981 # Absolute' but retains the VPA abbreviation. 24982 # 24983 # (S) MC parameters: 24984 # 0 = start xfer to primary aux device, 24985 # 1 = start xfer from primary aux device, 24986 # 2 = start xfer to secondary aux device, 24987 # 3 = start xfer from secondary aux device, 24988 # 4 = stop relay to primary aux device, 24989 # 5 = start relay to primary aux device, 24990 # 6 = stop relay to secondary aux device, 24991 # 7 = start relay to secondary aux device. 24992 # 24993 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD 24994 # abbreviation. 24995 # 24996 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU 24997 # abbreviation. 24998 # 24999 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation. 25000 # 25001 # (W) RM/SM modes are as follows: 25002 # 1 = Guarded Area Transfer Mode (GATM), 25003 # 2 = Keyboard Action Mode (KAM), 25004 # 3 = Control Representation Mode (CRM), 25005 # 4 = Insertion Replacement Mode (IRM), 25006 # 5 = Status Report Transfer Mode (SRTM), 25007 # 6 = Erasure Mode (ERM), 25008 # 7 = Line Editing Mode (LEM), 25009 # 8 = Bi-Directional Support Mode (BDSM), 25010 # 9 = Device Component Select Mode (DCSM), 25011 # 10 = Character Editing Mode (HEM), 25012 # 11 = Positioning Unit Mode (PUM), 25013 # 12 = Send/Receive Mode (SRM), 25014 # 13 = Format Effector Action Mode (FEAM), 25015 # 14 = Format Effector Transfer Mode (FETM), 25016 # 15 = Multiple Area Transfer Mode (MATM), 25017 # 16 = Transfer Termination Mode (TTM), 25018 # 17 = Selected Area Transfer Mode (SATM), 25019 # 18 = Tabulation Stop Mode (TSM), 25020 # 19 = Editing Boundary Mode (EBM), 25021 # 20 = Line Feed New Line Mode (LF/NL), 25022 # 21 = Graphic Rendition Combination Mode (GRCM), 25023 # 22 = Zero Default Mode (ZDM). 25024 # 25025 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition 25026 # but are listed here for reference. 25027 # 25028 # (X) Select Alternate Presentation Variants is used only for non-Latin 25029 # alphabets. 25030 # 25031 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM). 25032 # 25033 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA 25034 # abbreviation. 25035 # 25036 # --------------------------------------------------------------------------- 25037 # 25038 # Abbreviations: 25039 # 25040 # Intro an Introducer of some kind of defined sequence; the normal 7-bit 25041 # X3.64 Control Sequence Introducer is the two characters "Escape [" 25042 # 25043 # Delim a Delimiter 25044 # 25045 # x/y identifies a character by position in the ASCII table (column/row) 25046 # 25047 # eF editor function (see explanation) 25048 # 25049 # FE format effector (see explanation) 25050 # 25051 # F is a Final character in 25052 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table) 25053 # a control sequence (F from 4/0 to 7/14) 25054 # 25055 # Gs is a graphic character appearing in strings (Gs ranges from 25056 # 2/0 to 7/14) in the ASCII table 25057 # 25058 # Ce is a control represented as a single bit combination in the C1 set 25059 # of controls in an 8-bit character set 25060 # 25061 # C0 the familiar set of 7-bit ASCII control characters 25062 # 25063 # C1 roughly, the set of control chars available only in 8-bit systems. 25064 # This is too complicated to explain fully here, so read Jim Fleming's 25065 # article in the February 1983 BYTE, especially pages 214 through 224. 25066 # 25067 # Fe is a Final character of a 2-character Escape sequence that has an 25068 # equivalent representation in an 8-bit environment as a Ce-type 25069 # (Fe ranges from 4/0 to 5/15) 25070 # 25071 # Fs is a Final character of a 2-character Escape sequence that is 25072 # standardized internationally with identical representation in 7-bit 25073 # and 8-bit environments and is independent of the currently 25074 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) 25075 # 25076 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the 25077 # ASCII table 25078 # 25079 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII 25080 # table 25081 # 25082 # Pn is a numeric parameter in a control sequence, a string of zero or 25083 # more characters ranging from 3/0 to 3/9 in the ASCII table 25084 # 25085 # Ps is a variable number of selective parameters in a control sequence 25086 # with each selective parameter separated from the other by the code 25087 # 3/11 (which usually represents a semicolon); Ps ranges from 25088 # 3/0 to 3/9 and includes 3/11 25089 # 25090 # * Not relevant to terminal control, listed for completeness only. 25091 # 25092 # Format Effectors versus Editor Functions 25093 # 25094 # A format effector specifies how following output is to be displayed. 25095 # An editor function allows you to modify the display. Informally 25096 # format effectors may be destructive; format effectors should not be. 25097 # 25098 # For instance, a format effector that moves the "active position" (the 25099 # cursor or equivalent) one space to the left would be useful when you want to 25100 # create an overstrike, a compound character made of two standard characters 25101 # overlaid. Control-H, the Backspace character, is actually supposed to be a 25102 # format effector, so you can do this. But many systems use it in a 25103 # nonstandard fashion, as an editor function, deleting the character to the 25104 # left of the cursor and moving the cursor left. When Control-H is assumed to 25105 # be an editor function, you cannot predict whether its use will create an 25106 # overstrike unless you also know whether the output device is in an "insert 25107 # mode" or an "overwrite mode". When Control-H is used as a format effector, 25108 # its effect can always be predicted. The familiar characters carriage 25109 # return, linefeed, formfeed, etc., are defined as format effectors. 25110 # 25111 # NOTES ON THE DEC VT100 IMPLEMENTATION 25112 # 25113 # Control sequences implemented in the VT100 are as follows: 25114 # 25115 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, 25116 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC 25117 # 25118 # plus several private DEC commands. 25119 # 25120 # Erasing parts of the display (EL and ED) in the VT100 is performed thus: 25121 # 25122 # Erase from cursor to end of line Esc [ 0 K or Esc [ K 25123 # Erase from beginning of line to cursor Esc [ 1 K 25124 # Erase line containing cursor Esc [ 2 K 25125 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J 25126 # Erase from beginning of screen to cursor Esc [ 1 J 25127 # Erase entire screen Esc [ 2 J 25128 # 25129 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were 25130 # Esc [ 2 J, but this is wrong; the default is 0. 25131 # 25132 # The VT100 responds to receiving the DA (Device Attributes) control 25133 # 25134 # Esc [ c (or Esc [ 0 c) 25135 # 25136 # by transmitting the sequence 25137 # 25138 # Esc [ ? l ; Ps c 25139 # 25140 # where Ps is a character that describes installed options. 25141 # 25142 # The VT100's cursor location can be read with the DSR (Device Status 25143 # Report) control 25144 # 25145 # Esc [ 6 n 25146 # 25147 # The VT100 reports by transmitting the CPR sequence 25148 # 25149 # Esc [ Pl ; Pc R 25150 # 25151 # where Pl is the line number and Pc is the column number (in decimal). 25152 # 25153 # The specification for the DEC VT100 is document EK-VT100-UG-003. 25154 25155 #### ANSI.SYS 25156 # 25157 # Here is a description of the color and attribute controls supported in the 25158 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI 25159 # terminal emulators for Intel boxes obey these. They are a proper subset 25160 # of the ECMA-48 escapes. 25161 # 25162 # 0 all attributes off 25163 # 1 foreground bright 25164 # 4 underscore on 25165 # 5 blink on/background bright (not reliable with brown) 25166 # 7 reverse-video 25167 # 8 set blank (non-display) 25168 # 10 set primary font 25169 # 11 set first alternate font (on PCs, display ROM characters 1-31) 25170 # 12 set second alternate font (on PCs, display IBM high-half chars) 25171 # 25172 # Color attribute sets 25173 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown, 25174 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white 25175 # Bright black becomes gray. Bright brown becomes yellow, 25176 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard. 25177 # 25178 # * If the 5 attribute is on and you set a background color (40-47) it is 25179 # supposed to enable bright background. 25180 # 25181 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing 25182 # when you try to set a "bright brown" (yellow) background with attribute 25183 # 5 (you get a blinking yellow foreground instead). A few displays 25184 # (including the System V console) support an attribute 6 that undoes this 25185 # braindamage (this is required by iBCS2). 25186 # 25187 # * Some older versions of ANSI.SYS have a bug that causes them to require 25188 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48 25189 # compatible.) 25190 25191 #### Intel Binary Compatibility Standard 25192 # 25193 # For comparison, here are the capabilities implied by the Intel Binary 25194 # Compatibility Standard for UNIX systems (Intel order number 468366-001). 25195 # These recommendations are optional. IBCS2 allows the leading escape to 25196 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with 25197 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities 25198 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2 25199 # terminfo entry are followed with the corresponding capability in parens: 25200 # 25201 # CSI <n>k disable (n=0) or enable (n=1) keyclick 25202 # CSI 2h lock keyboard 25203 # CSI 2i send screen as input 25204 # CSI 2l unlock keyboard 25205 # CSI 6m enable background color intensity 25206 # CSI <0-2>c reserved 25207 # CSI <0-59>m select graphic rendition 25208 # CSI <n>;<m>H (cup) cursor to line n and column m 25209 # CSI <n>;<m>f cursor to line n and column m 25210 # CSI <n>@ (ich) insert characters 25211 # CSI <n>A (cuu) cursor up n lines 25212 # CSI <n>B (cud) cursor down n lines 25213 # CSI <n>C (cuu) cursor right n characters 25214 # CSI <n>D (cud) cursor left n characters 25215 # CSI <n>E cursor down n lines and in first column 25216 # CSI <n>F cursor up n lines and in first column 25217 # CSI <n>G (hpa) position cursor at column n-1 25218 # CSI <n>J (ed) erase in display 25219 # CSI <n>K (el) erase in line 25220 # CSI <n>L (il) insert line(s) 25221 # CSI <n>P (dch) delete characters 25222 # CSI <n>S (indn) scroll up n lines 25223 # CSI <n>T (rin) scroll down n lines 25224 # CSI <n>X (ech) erase characters 25225 # CSI <n>Z (cbt) back up n tab stops 25226 # CSI <n>` cursor to column n on line 25227 # CSI <n>a (cuu) cursor right n characters 25228 # CSI <n>d (vpa) cursor to line n 25229 # CSI <n>e cursor down n lines and in first column 25230 # CSI <n>g (cbt) clear all tabs 25231 # CSI <n>z make virtual terminal n active 25232 # CSI ?7h (smam) turn automargin on 25233 # CSI ?7l (rmam) turn automargin off 25234 # CSI s save cursor position 25235 # CSI u restore cursor position to saved value 25236 # CSI =<c>A set overscan color 25237 # CSI =<c>F set normal foreground color 25238 # CSI =<c>G set normal background color 25239 # CSI =<c>H set reverse foreground color 25240 # CSI =<c>I set reverse foreground color 25241 # CSI =<c>J set graphic foreground color 25242 # CSI =<c>K set graphic foreground color 25243 # CSI =<n>g (dispc) display n from alternate graphics character set 25244 # CSI =<p>;<d>B set bell parameters 25245 # CSI =<s>;<e>C set cursor parameters 25246 # CSI =<x>D enable/disable intensity of background color 25247 # CSI =<x>E set/clear blink vs. bold background 25248 # CSI 7 (sc) (sc) save cursor position 25249 # CSI 8 (rc) (rc) restore cursor position to saved value 25250 # CSI H (hts) (hts) set tab stop 25251 # CSI Q<n><string> define function key string 25252 # (string must begin and end with delimiter char) 25253 # CSI c (clear) clear screen 25254 # 25255 # The lack of any specification for attributes in SGR (among other things) 25256 # makes this a wretchedly weak standard. The table above is literally 25257 # everything iBSC2 has to say about terminal escape sequences; there is 25258 # no further discussion of their meaning or how to set the parameters 25259 # in these sequences at all. 25260 # 25261 25262 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE 25263 # 25264 # The historical termcap file entries were written primarily in 4.4BSD termcap. 25265 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set, 25266 # with the extension names chosen for compatibility with the termcap names 25267 # assigned in System V terminfo. There are some variant extension sets out 25268 # there. We try to describe them here. 25269 # 25270 #### XENIX extensions: 25271 # 25272 # The XENIX extensions include a set of function-key capabilities as follows: 25273 # 25274 # code XENIX variable name terminfo name name clashes? 25275 # ---- ------------------- ------------- ----------------------- 25276 # CL key_char_left 25277 # CR key_char_right 25278 # CW key_change_window create_window 25279 # EN key_end kend 25280 # HM key_home khome 25281 # HP ?? 25282 # LD key_delete_line kdl1 25283 # LF key_linefeed label_off 25284 # NU key_next_unlocked_cell 25285 # PD key_page_down knp 25286 # PL ?? 25287 # PN start_print mc5 25288 # PR ?? 25289 # PS stop_print mc4 25290 # PU key_page_up kpp pulse 25291 # RC key_recalc remove_clock 25292 # RF key_toggle_ref req_for_input 25293 # RT key_return kent 25294 # UP key_up_arrow kcuu1 parm_up_cursor 25295 # WL key_word_left 25296 # WR key_word_right 25297 # 25298 # The XENIX extensions also include the following character-set and highlight 25299 # capabilities: 25300 # 25301 # XENIX terminfo function 25302 # ----- -------- ------------------------------ 25303 # GS smacs start alternate character set 25304 # GE rmacs end alternate character set 25305 # GG :as:/:ae: glitch (analogous to :sg:/:ug:) 25306 # bo blink begin blink (not used in /etc/termcap) 25307 # be end blink (not used in /etc/termcap) 25308 # bb blink glitch (not used in /etc/termcap) 25309 # it dim begin dim (not used in /etc/termcap) 25310 # ie end dim (not used in /etc/termcap) 25311 # ig dim glitch (not used in /etc/termcap) 25312 # 25313 # Finally, XENIX also used the following forms-drawing capabilities: 25314 # 25315 # single double type ASCII approximation 25316 # ------ ------ ------------- ------------------- 25317 # GV Gv vertical line | 25318 # GH Gv horizontal line - _ 25319 # G1 G5 top right corner _ | 25320 # G2 G6 top left corner | 25321 # G3 G7 bottom left corner |_ 25322 # G4 G8 bottom right corner _| 25323 # GD Gd down-tick character T 25324 # GL Gl left-tick character -| 25325 # GR Gr right-tick character |- 25326 # GC Gc middle intersection -|- 25327 # GU Gu up-tick character _|_ 25328 # 25329 # These were invented to take advantage of the IBM PC ROM character set. One 25330 # can compose an acsc string from the single-width characters as follows 25331 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}" 25332 # When translating a termcap file, ncurses tic will do this automatically. 25333 # The double forms characters don't fit the SVr4 terminfo model. 25334 # 25335 #### AT&T Extensions: 25336 # 25337 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of 25338 # nonstandard capabilities. Its signature is the KM capability, used to name 25339 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this 25340 # set. Comments in the original, and a little cross-checking with other AT&T 25341 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh: 25342 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights), 25343 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make 25344 # cursor invisible), and CV=:ve: (make cursor normal). 25345 # 25346 #### HP Extensions 25347 # 25348 # The HP library (as of mid-1995, their term.h file version 70.1) appears to 25349 # have the System V capabilities up to SVr1 level. After that, it supports 25350 # two nonstandard caps meml and memu corresponding to the old termcap :ml:, 25351 # :mu: capabilities. After that, it supports caps plab_norm, label_on, 25352 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the 25353 # HP binary format incompatible with SVr4's. 25354 # 25355 #### IBM Extensions 25356 # 25357 # There is a set of nonstandard terminfos used by IBM's AIX operating system. 25358 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all 25359 # capabilities following prtr_non with the following special capabilities: 25360 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab, 25361 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr, 25362 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml, 25363 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents: 25364 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be 25365 # renamed (to kcbt and kslt). The places in the box[12] capabilities 25366 # correspond to acsc chars, here is the mapping: 25367 # 25368 # box1[0] = ACS_ULCORNER 25369 # box1[1] = ACS_HLINE 25370 # box1[2] = ACS_URCORNER 25371 # box1[3] = ACS_VLINE 25372 # box1[4] = ACS_LRCORNER 25373 # box1[5] = ACS_LLCORNER 25374 # box1[6] = ACS_TTEE 25375 # box1[7] = ACS_RTEE 25376 # box1[8] = ACS_BTEE 25377 # box1[9] = ACS_LTEE 25378 # box1[10] = ACS_PLUS 25379 # 25380 # The box2 characters are the double-line versions of these forms graphics. 25381 # The AIX binary terminfo format is incompatible with SVr4's. 25382 # 25383 #### Iris console extensions: 25384 # 25385 # HS is half-intensity start; HE is half-intensity end 25386 # CT is color terminal type (for Curses & rogue) 25387 # CP is color change escape sequence 25388 # CZ are color names (for Curses & rogue) 25389 # 25390 # The ncurses tic utility recognizes HS as an alias for mh <dim>. 25391 # 25392 #### TC Extensions: 25393 # 25394 # There is a set of extended termcaps associated with something 25395 # called the "Terminal Control" or TC package created by MainStream Systems, 25396 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses 25397 # CF for civis and CO for cvvis. Finally, they define a boolean :ct: 25398 # that flags color terminals. 25399 # 25400 ######## NCURSES USER-DEFINABLE CAPABILITIES 25401 # 25402 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and 25403 # infocmp to manipulate user-definable capabilities. Those that are intended 25404 # for use in either terminfo or termcap use 2-character names. Extended 25405 # function keys do not use 2-character names, and are available only with 25406 # terminfo. 25407 # 25408 # Beginning in 2010, NetBSD curses has also provided a "-x" option for 25409 # tic/infocmp, and uses this database (with a few changes). There are a few 25410 # differences, noted in 25411 # https://invisible-island.net/ncurses/ncurses-netbsd.html 25412 # 25413 # ncurses makes explicit checks for a few user-definable capabilities: AX, E3, 25414 # RGB, U8, XM, which are documented in the user_caps(5) manual page. 25415 # 25416 #### SCREEN Extensions: 25417 # 25418 # The screen program uses the termcap interface. It recognizes a few useful 25419 # nonstandard capabilities. Those are used in this file. 25420 # 25421 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m / 25422 # \E[49m). 25423 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 25424 # E0 (str) Switch charset 'G0' back to standard charset. 25425 # S0 (str) Switch charset 'G0' to the specified charset. 25426 # XT (bool) Terminal understands special xterm sequences (OSC, mouse 25427 # tracking). 25428 # 25429 # AX is relatively straightforward; it is interpreted by ncurses to say that 25430 # SGR 39/49 reset the terminal's foreground and background colors to their 25431 # "default". 25432 # 25433 # XT is harder, since screen's manpage does not give more details. For that, 25434 # we must read screen's source-code. For example, when XT is set, screen 25435 # assumes 25436 # 25437 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of 25438 # screen may also set the terminal's name, which is (for xterm) distinct 25439 # from the icon name. 25440 # b) OSC 20 sets the background pixmap. This is an rxvt feature. 25441 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again 25442 # this is an rxvt feature. 25443 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003. 25444 # These are from xterm, although xterm accepts mouse codes that may not be 25445 # recognized by screen, e.g., 1005, 1006. 25446 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color 25447 # sequence. However, because screen uses only termcap, the values returned 25448 # by Af/Ab are not usable because they rely on expressions that termcap 25449 # does not support. Therefore, screen uses a hardcoded string to work 25450 # around the limitation. In a few cases, screen also uses tparm, which 25451 # is a terminfo function rather than termcap. 25452 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set. 25453 # g) screen also uses the feature to decide whether to pay attention to other 25454 # xterm-related features which are unrelated to the description in the 25455 # manual page. 25456 # 25457 # Since XT is useful only when the outer terminal matches screen's assumptions, 25458 # it is appropriate to use it in the derived terminal descriptions such as 25459 # "screen.xterm", but not in the generic "screen", "screen-bce" entries. 25460 # 25461 # The other ISO-2022 features are rarely used, but provided here to make 25462 # screen's termcap features available. 25463 # 25464 #### XTERM Extensions: 25465 # 25466 # For a discussion of "xterm", "xterm-256color" as values for TERM, see 25467 # https://invisible-island.net/ncurses/ncurses.faq.html#xterm_generic 25468 # https://invisible-island.net/ncurses/ncurses.faq.html#xterm_256color 25469 # 25470 # For xterm control sequences, see 25471 # https://invisible-island.net/xterm/ctlseqs/ctlseqs.html 25472 # 25473 # For function-keys with modifiers, see 25474 # https://invisible-island.net/ncurses/ncurses.faq.html#modified_keys 25475 # 25476 # For a discussion of "bracketed paste", see 25477 # https://invisible-island.net/xterm/xterm-paste64.html 25478 # 25479 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in 25480 # 1999), xterm has supported shift/control/alt/meta modifiers which produce 25481 # additional function-key strings. Some other developers copied the feature, 25482 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make 25483 # these key definitions less ambiguous. 25484 # 25485 # A few terminals provide similar functionality (sending distinct keys when 25486 # a modifier is used), including rxvt. 25487 # 25488 # These are the extended keys defined in this file: 25489 # 25490 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6 25491 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4 25492 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7 25493 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 kxIN kxOUT ka2 kb1 25494 # kb3 kc2 25495 # 25496 # Bracketed paste is described with these capabilities in vim: 25497 # 25498 # BE enables bracketed paste 25499 # BD disables bracketed paste 25500 # PS is sent before the pasted text 25501 # PE is sent after the pasted text 25502 # 25503 # vim also uses these names for xterm focus: 25504 # 25505 # fe enables focus events 25506 # fd disables focus events 25507 # 25508 # Here are the other xterm-related extensions which are used in this file: 25509 # 25510 # Cr is a string capability which resets the cursor color 25511 # Cs is a string capability which sets the cursor color to a given value. 25512 # The single string parameter is the color name/number, according to the 25513 # implementation. 25514 # Ms modifies the selection/clipboard. Its parameters are 25515 # p1 = the storage unit (clipboard, selection or cut buffer) 25516 # p2 = the base64-encoded clipboard content. 25517 # RV requests the terminal to report secondary device attributes (i.e, version). 25518 # rv shows the format of the terminal responses, as a regular expression. 25519 # Se resets the cursor style to the terminal power-on default. 25520 # Ss is a string capability with one numeric parameter. It is used to set the 25521 # cursor style as described by the DECSCUSR function to a block or 25522 # underline. 25523 # TS is a string capability which acts like "tsl", but uses no parameter and 25524 # goes to the first column of the "status line". 25525 # XF is set/true for terminals which support the xterm focus-in/focus-out 25526 # escape sequences sent from the terminal to the host when private mode 25527 # 1004 is set. Those are defined as kxIN and kxOUT, to take advantage of 25528 # ncurses keypad mode to interpret them like a function key. Because the 25529 # 1004 mode is usually combined with other flags to set the mouse protocol, 25530 # this flag provides an application with the information that the focus 25531 # mode is assumed to be set, e.g., in XM. 25532 # XM is a string capability which overrides ncurses's built-in string which 25533 # enables/disables xterm mouse mode. 25534 # xm shows the format of the mouse responses. Parameters: 25535 # p1 = y-ordinate 25536 # p2 = x-ordinate 25537 # p3 = button 25538 # p4 = state, e.g., pressed or released 25539 # p5 = y-ordinate starting region 25540 # p6 = x-ordinate starting region 25541 # p7 = y-ordinate ending region 25542 # p8 = x-ordinate ending region 25543 # Other extensions, used in xm: 25544 # %u = UTF-8 25545 # XR requests the terminal to report its version as a free-format string. 25546 # xr shows the format of the terminal responses, as a regular expression. 25547 # 25548 #### Miscellaneous extensions: 25549 # 25550 # csr clears the status line 25551 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 25552 # This was implemented for the Hurd. 25553 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an 25554 # experimental feature of tmux. 25555 # CO gives the number of indexed ("ANSI") colors which overlay an RGB color 25556 # space. 25557 # E3 clears the terminal's scrollback buffer. This was implemented in the 25558 # Linux 3.0 kernel as a security feature. It matches a feature which was 25559 # added in xterm patch #107. 25560 # NQ denotes a terminal which does not support the standard query/response used 25561 # in u6/u7 (cursor position) and u8/u9 (device attributes). 25562 # U8 is a numeric capability which denotes a terminal emulator which does not 25563 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero 25564 # value to enable it. 25565 # Smulx modifies the appearance of underlines in VTE, December 2017. 25566 # 25567 ######## CHANGE HISTORY 25568 # 25569 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94. 25570 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were 25571 # maintained by Eric S. Raymond as part of the ncurses project. 25572 # 25573 # This file contains all the capability information present in John Kunze's 25574 # last version of the termcap master file, except as noted in the change 25575 # comments at end of file. Some information about very ancient obsolete 25576 # capabilities has been moved to comments. Some all-numeric names of older 25577 # terminals have been retired. 25578 # 25579 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some 25580 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer 25581 # used by BSD curses. 25582 # 25583 # The 9.1.0 version of this file was translated from my lightly-edited copy of 25584 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for 25585 # the purpose. Unless the ncurses tic implementation and the Lisp code were 25586 # making perfectly synchronized mistakes which I then failed to catch by 25587 # eyeball, the translation was correct and perfectly information-preserving. 25588 # 25589 # Major version number bumps correspond to major version changes in ncurses. 25590 # 25591 # Here is a log of the changes since then: 25592 # 25593 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995): 25594 # * First terminfo master translated from 8.3. 25595 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995): 25596 # * Replaced Wyse entries with updated entries supplied by vendor. 25597 # 25598 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995): 25599 # * Added contact & status info from G. Clark Brown <clark (at] sssi.com>. 25600 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995): 25601 # * Better XENIX keycap translation. Describe TC termcaps. 25602 # * Contact and history info supplied by Qume. 25603 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995): 25604 # * Raided the Shuford FTP site for recent termcaps/terminfos. 25605 # * Added information on X3.64 and VT100 standard escape sequences. 25606 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995): 25607 # * Added a correct X11R6 xterm entry. 25608 # * Fixed terminfo translations of padding. 25609 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995): 25610 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm. 25611 # * Added u6/u7/u8/u9 capabilities. 25612 # * Added PCVT entry. 25613 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995): 25614 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry 25615 # to use reverse-video standout so Emacs will look right. 25616 # * Added el1 capability to ansi. 25617 # * Added smacs/rmacs to ansi.sys. 25618 # 25619 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995): 25620 # * New mt70 entry. 25621 # * Added COPYRIGHTS AND OTHER DELUSIONS. 25622 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics 25623 # smartvid & smarterm, ampex 175 & 219 & 232, 25624 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20, 25625 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2, 25626 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan, 25627 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500. 25628 # * Replaced the Perkin-Elmer entries with vendor's official ones. 25629 # * Restored the old minimal-ansi entry, luna needs it. 25630 # * Fixed some incorrect ip and proportional-padding translations. 25631 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995): 25632 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly. 25633 # * Make the xterm entry 65 lines again; create xterm25 and xterm24 25634 # to force a particular height. 25635 # * Added beehive4 and reorganized other Harris entries. 25636 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995): 25637 # * Merged in DEC's official entries for its terminals. The only old 25638 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo). 25639 # * Replaced the translated BBN BitGraph entries with purpose-built 25640 # ones from AT&T's SVr3. 25641 # * Replaced the AT&T entries with AT&T's official terminfos. 25642 # * Added Teleray 16, vc415, cops10. 25643 # * Merged in many individual capabilities from SCO terminfo files. 25644 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995): 25645 # * Typo fixes. 25646 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters. 25647 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995): 25648 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803, 25649 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21, 25650 # simterm, citoh and variants. 25651 # * Replaced sol entry with sol1 and sol2. 25652 # * Replaced Qume QVT and Freedom-series entries with purpose-built 25653 # terminfo entries. 25654 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek 25655 # and dg200 entries using caps from SCO. 25656 # * Added the usual set of function-key mappings to ANSI entry. 25657 # * Corrected xterm's function-key capabilities. 25658 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995): 25659 # * Fix in xterm entry, cub and cud are not reliable under X11R6. 25660 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995): 25661 # * Fix in xterm entry, get the arrow keys right. 25662 # * Change some \0 escapes to \200. 25663 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) 25664 # * Added apple (Videx card), adm1a, oadm31. 25665 # * Fixed malformed ampex csr. 25666 # * Fixed act4, cyb110; they had old-style prefix padding left in. 25667 # * Changed mandatory to advisory padding in many entries. 25668 # * Replaced HP entries up to hpsub with purpose-built ones. 25669 # * Blank rmir/smir/rmdc/smdc capabilities removed. 25670 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924. 25671 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995): 25672 # * Replaced the Ann Arbor entries with SCO's, the init strings are 25673 # more efficient (but the entries otherwise identical). 25674 # * Added dg211 from Shuford archive. 25675 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk, 25676 # adm42-nl, pc52, gs6300, xerox820, uts30. 25677 # * Pull SCO's padding into vi200 entry. 25678 # * Improved capabilities for tvi4107 and other TeleVideo and Viewpoint 25679 # entries merged in from SCO's descriptions. 25680 # * Fixed old-style prefix padding on zen50, h1500. 25681 # * Moved old superbee entry to superbee-xsb, pulled in new superbee 25682 # entry from SCO's description. 25683 # * Reorganized the special entries. 25684 # * Added lm#0 to cbunix and virtual entries. 25685 # 25686 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995): 25687 # * Restored cdc456tst. 25688 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch. 25689 # * Added megatek, beacon, microkit. 25690 # * Freeze for ncurses-1.9 release. 25691 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995): 25692 # * Added historical data for TAB. 25693 # * Comment fixes from David MacKenzie. 25694 # * Added the new BSDI pc3 entry. 25695 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) 25696 # * A change in the tic -C logic now ensures that all entries in 25697 # the termcap translation will fit in < 1024 bytes. 25698 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries 25699 # from GNU termcap file. This merges in all their local information. 25700 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995) 25701 # * Changed tic -C logic to dump all capabilities used by GNU termcap. 25702 # * Added warnings about entries with long translations (restoring 25703 # all the GNU termcaps pushes a few over the edge). 25704 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995) 25705 # * Yet another tic change, and a couple of entry tweaks, to reduce the 25706 # number of long (> 1024) termcap translations back to 0. 25707 # 25708 # 9.6.0 (Mon May 1 10:35:54 EDT 1995) 25709 # * Added kf13-kf20 to Linux entry. 25710 # * Regularize Prime terminal names. 25711 # * Historical data on Synertek. 25712 # * Freeze for ncurses-1.9.1. 25713 # 9.6.1 (Sat May 6 02:00:52 EDT 1995): 25714 # * Added true xterm-color entry, renamed djm's pseudo-color entry. 25715 # * Eliminate whitespace in short name fields, this tanks some scripts. 25716 # * Name field changes to shorten some long entries. 25717 # * Termcap translation now automatically generates empty rmir/smir 25718 # when ich1/ich is present (copes with an ancient vi bug). 25719 # * Added `screen' entries from FSF's screen-3.6.2. 25720 # * Added linux-nic and xterm-nic entries. 25721 # 9.6.2 (Sat May 6 17:00:55 EDT 1995): 25722 # * Change linux entry to use smacs=\E[11m and have an explicit acsc, 25723 # eliminating some special-case code in ncurses. 25724 # 25725 # 9.7.0 (Tue May 9 18:03:12 EDT 1995): 25726 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think 25727 # that captures everything unique from it. 25728 # * Added reorder script generator. 25729 # * Freeze for ncurses 1.9.2 release. 25730 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995): 25731 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux. 25732 # * Added Olaf Siebert's corrections for adm12. 25733 # * ansi-pc-color now includes the colors and pairs caps, so that 25734 # entries which use it will inherit them automatically. 25735 # * The linux entry can now recognize the center (keypad 5) key. 25736 # * Removed some junk that found its way into Linux acsc. 25737 # 25738 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995): 25739 # * Add 50% cut mark as a desperate hack to reduce tic's core usage. 25740 # * xterm doesn't try to use application keypad mode any more. 25741 # * Freeze for ncurses-1.9.3 release. 25742 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995): 25743 # * Added corrected sun entry from vendor. 25744 # * Added csr capability to linux entry. 25745 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. 25746 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. 25747 # * Some commented-out caps in long entries come back in, my code 25748 # for computing string-table lengths had a bug in it. 25749 # * pcansi series modified to fit comm-program reality better. 25750 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995): 25751 # * BSD/OS actually ships the ibmpc3 bold entry as its console. 25752 # * Correct some bad aliases in the pcansi series 25753 # * Added entry for QNX console. 25754 # * Clean up duplicate long names for use with 4.4 library. 25755 # * Change vt100 standout to be normal reverse vide, not bright reverse; 25756 # this makes the Emacs status line look better. 25757 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995): 25758 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340. 25759 # * Minor surgery, mostly on name strings, to shorten termcap version. 25760 # 25761 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995): 25762 # * Added dec-vt100 for use with the EWAN emulator. 25763 # * Added kmous to xterm for use with xterm's mouse-tracking facility. 25764 # * Freeze for 1.9.5 alpha release. 25765 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995): 25766 # * Changed xterm lines to 24, the X11R6 default. 25767 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995): 25768 # * Added 7 newly discovered, undocumented acsc characters to linux 25769 # entry (the pryz{|} characters). 25770 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly. 25771 # * Correct two typos in the xterm entries introduced in 9.9.1. 25772 # * I finally figured out how to translate ko capabilities. Done. 25773 # * Added tvi921 entries from Tim Theisen. 25774 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl. 25775 # * Removed mystery tec entry, it was neither interesting nor useful. 25776 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f, 25777 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a, 25778 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211, 25779 # by making them relative to use capabilities 25780 # * Added cuf1=^L to tvi925 from deleted variant tvi925a. 25781 # * fixed cup in adm22 entry and parametrized strings in vt320-k3. 25782 # * added it#8 to entries that used to have :pt: -- tvi912, vi200, 25783 # ampex80, 25784 # * Translate all home=\E[;H capabilities to home=\E[H, they're 25785 # equivalent. 25786 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of 25787 # vt100 and ANSI-like terminals. 25788 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995): 25789 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic 25790 # does this now, too. 25791 # * fviewpoint is gone, it duplicated screwpoint. 25792 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c, 25793 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, 25794 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW. 25795 # The UW vi50 replaces the old one, which becomes vi50adm, 25796 # * No more embedded commas in name fields. 25797 # 25798 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995): 25799 # * XENIX forms characters in fos, trs16, scoansi become acsc strings, 25800 # * Introduced klone+* entries for describing Intel-console behavior. 25801 # * Linux kbs is default-mapped to delete for some brain-dead reason. 25802 # * -nsl -> -ns. The -pp syntax is obsolete. 25803 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs. 25804 # * Make xterm entry do application-keypad mode again. I got complaints 25805 # that it was messing up someone's 3270 emulator. 25806 # * Added some longname fields in order to avoid warning messages from 25807 # older tic implementations. 25808 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use 25809 # it! (This gives us pi, greater than, less than, and a few more.) 25810 # * Freeze for ncurses-1.9.6 release. 25811 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995): 25812 # * Add xon to a number of console entries, they're memory-mapped and 25813 # don't need padding. 25814 # * Correct the use dependencies in the ansi series. 25815 # * Hand-translate more XENIX capabilities. 25816 # * Added hpterm entry for HP's X terminal emulator. 25817 # * Added aixterm entries. 25818 # * Shortened four names so everything fits in 14 chars. 25819 # 25820 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995): 25821 # * Added ibcs2 entry and info on iBCS2 standard. 25822 # * Corrected hpa/vpa in linux entry. They still fail the worm test. 25823 # * We can handle the HP meml/memu capability now. 25824 # * Added smacs to klone entries, just as documentation. 25825 # * Corrected ansi.sys and cit-500 entries. 25826 # * Added z39, vt320-k311, v220c, and avatar entries. 25827 # * Make pcansi use the ansi.sys invis capability. 25828 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c, 25829 # tvi925, tvi950, dt80, ncr7900i, h19. 25830 # * X3.64 has been withdrawn, change some references. 25831 # * Removed function keys from ansi-m entry. 25832 # * Corrected ansi.sys entry. 25833 # * Freeze for ncurses-1.9.7 release. 25834 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995): 25835 # * Added rmam/smam capabilities to many entries based on init strings. 25836 # * Added correct hpa/vpa to linux. 25837 # * Reduced several entries relative to vt52. 25838 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995): 25839 # * Exiled some utterly unidentifiable custom and homebrew types to the 25840 # UFO file; also, obsolete small-screen hardware; also, entries which 25841 # look flat-out incorrect, garbled, or redundant. These include the 25842 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, 25843 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile, 25844 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu, 25845 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, 25846 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, 25847 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, 25848 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, 25849 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, 25850 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, 25851 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, 25852 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, 25853 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, 25854 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms. 25855 # * Corrected pcvt25h as suggested by Brian C. Grayson 25856 # <bgrayson (at] pine.ece.utexas.edu>. 25857 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995): 25858 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. 25859 # * Added kent=\EOM to xterm entry. 25860 # 25861 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995): 25862 # * Corrected gigi entry. 25863 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to 25864 # bad hpa/vpa capabilities. 25865 # * Corrected flash strings to have a uniform delay of .2 sec. No 25866 # more speed-dependent NUL-padding! 25867 # * terminfo capabilities in comments bracketed with <>. 25868 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995): 25869 # * Replaced pcvt with the 3.31 pcvt entries. 25870 # * Freeze for 1.9.7a. 25871 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995): 25872 # * Added emu entry from the X11R6 contrib tape sources. 25873 # 25874 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995): 25875 # * Improved iris-ansi and sun entries. 25876 # * More flash string improvements. 25877 # * Corrected wy160 & wy160 as suggested by Robert Dunn 25878 # * Added dim to at386. 25879 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says 25880 # he's ready to start using the termcap generated from this one. 25881 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m, 25882 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220. 25883 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925, 25884 # att610, att620, att630, 25885 # * Changed hazeltine name prefix from h to hz. 25886 # * Sent t500 to the UFI file. 25887 # * I think we've sucked all the juice out of BSDI's termcap file now. 25888 # * Freeze for ncurses 1.9.8 release 25889 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995) 25890 # * Unfreeze, linux kbs needed to be fixed. 25891 # * Tim Theisen pinned down a bug in the DMD firmware. 25892 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995): 25893 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko). 25894 # (The broken ones had been shadowed by sgr.) 25895 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995): 25896 # * Added documentation on ECMA-48 standard. 25897 # * New Amiga entry. 25898 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995): 25899 # * More ECMA-48 stuff 25900 # * Corrected typo in minix entry, added pc-minix. 25901 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko). 25902 # * Added rxvt entry. 25903 # * Added 1.3.x color-change capabilities to linux entry. 25904 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995): 25905 # * Corrected rxvt entry khome/kend. 25906 # * Corrected linux color change capabilities. 25907 # * NeXT entries from Dave Wetzel. 25908 # * Cleaned up if and rf file names (all in /usr/share now). 25909 # * Changed linux op capability to avoid screwing up a background color 25910 # pair set by setterm. 25911 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996): 25912 # * Added xterm-sun. 25913 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996): 25914 # * Added visa50. 25915 # 25916 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996): 25917 # * Another sweep through the Shuford archive looking for new info. 25918 # * Added dg100 alias to dg6053 based on a comp.terminals posting. 25919 # * Added st52 from Per Persson. 25920 # * Added eterm from the GNU Emacs 19.30 distribution. 25921 # * Freeze for 1.9.9. 25922 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996): 25923 # * FreeBSD console entries from Andrew Chernov. 25924 # * Removed duplicate Atari st52 name. 25925 # 9.13.2 (Tue May 7 16:10:06 EDT 1996) 25926 # * xterm doesn't actually have ACS_BLOCK. 25927 # * Change klone+color setf/setb to simpler forms that can be 25928 # translated into termcap. 25929 # * Added xterm1. 25930 # * Removed mechanically-generated junk capabilities from cons* entries. 25931 # * Added color support to bsdos. 25932 # 9.13.3 (Thu May 9 10:35:51 EDT 1996): 25933 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf (at] ecse.rpi.edu>. 25934 # * Created ecma+color, linux can use it. Also added ech to linux. 25935 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates. 25936 # * Add descriptions to FreeBSD console entries. Also shorten 25937 # some aliases to <= 14 chars for portability. 25938 # * Added x68k console 25939 # * Added OTbs to several VT-series entries. 25940 # 9.13.4 (Wed May 22 10:54:09 EDT 1996): 25941 # * screen entry update for 3.7.1 from Michael Alan Dorman. 25942 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996): 25943 # * kterm correction due to Kenji Rikitake. 25944 # * ACS correction in vt320-kll due to Phillippe De Muyter. 25945 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996): 25946 # * Sun console entry correction from J.T. Conklin. 25947 # * Changed all DEC VT300 and up terminals to use VT300 tab set 25948 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996): 25949 # * Added smul to linux entry (we never noticed it was missing 25950 # because of sgr!). 25951 # * Added rmln to hp+labels (deduced from other HP entries). 25952 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas, 25953 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3. 25954 # * Corrected vt220 acsc. 25955 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs; 25956 # this corresponds to reality and helps prevent some tic warnings. 25957 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2, 25958 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11, 25959 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200, 25960 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc, 25961 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90, 25962 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, 25963 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000, 25964 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx, 25965 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25, 25966 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800, 25967 # ifmr, v3220, wy100q, tandem653, ibmaed. 25968 # * Added DWK terminal description. 25969 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996): 25970 # * Many entries now have highlights inherited from adm+sgr. 25971 # * xterm entry now corresponds to XFree86 3.1.2E, with color. 25972 # * xtitle and xtitle-twm enable access to the X status line. 25973 # * Added linux-1.3.6 color palette caps in conventional format. 25974 # * Added adm1178 terminal. 25975 # * Move fos and apollo terminals to obsolete category. 25976 # * Aha! The BRL terminals file told us what the Iris extensions mean. 25977 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar, 25978 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file: 25979 # cit500, adm11. 25980 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996): 25981 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756, 25982 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155. 25983 # * Corrected, from BRL termcap file: vi50. 25984 # * Better rxvt entry & corrected xterm entries from Thomas Dickey. 25985 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996): 25986 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1, 25987 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne 25988 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi, 25989 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro, 25990 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae. 25991 # * Paired-attribute fixes to various terminals. 25992 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons. 25993 # * xterm entry corrections from Thomas Dickey. 25994 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996): 25995 # * Added t916 entry, translated from a termcap in SCO's support area. 25996 # * New qnx entry from Michael Hunter. 25997 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996): 25998 # * Added hpex2 from Ville Sulko. 25999 # * Fixed a bug that ran the qnx and pcvtXX together. 26000 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996): 26001 # * Added dtterm entry from Solaris CDE. 26002 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996): 26003 # * corrected pairs#8 typo in dtterm entry. 26004 # * added tvi9065. 26005 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996): 26006 # * updated xterm entry to cover 3.1.2E's new features. 26007 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996): 26008 # * Added new minix entry 26009 # * Removed aliases of the form ^[0-9]* for obsolete terminals. 26010 # * Commented out linux-old, nobody's using pre-1.2 kernels now. 26011 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996): 26012 # * Added Prism entries and kt7ix. 26013 # * Caution notes about EWAN and tabset files. 26014 # * Changed /usr/lib/tabset -> /usr/share/tabset. 26015 # * Added acsc/rmacs/smacs to vt52. 26016 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996): 26017 # * Merged in Thomas Dickey's reorganization of the xterm entries; 26018 # added technical corrections to avoid warning messages. 26019 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996): 26020 # * Added rmso=\E[27m in Linux entry. 26021 # * Added koi8-r support for Linux console. 26022 # * Replace xterm entries with canonical ones from XFree86 3.2. 26023 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996): 26024 # * Added color_xterm from Jacob Mandelson 26025 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996): 26026 # * Back off the xterm entry to use r6 as a base. 26027 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996): 26028 # * Added dec-vt220 at Adrian Garside's request. 26029 # 26030 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)--------------------------- 26031 # 26032 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn 26033 # * Minor corrections to xterm entries. 26034 # * Replaced EWAN telnet entry. 26035 # * Dropped the reorder script generator. It was a fossil. 26036 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 26037 # * Replaced minitel-2 entry. 26038 # * Added MGR, ansi-nt. 26039 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 26040 # * Thorsten Lockert added termcap `bs' to a lot of types, working from 26041 # the 4.4BSD Lite2 file. 26042 # 26043 # 10.1.1 (Sat May 3 21:41:27 EDT 1997): 26044 # * Use setaf/setab consistently with SVr4. 26045 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5 26046 # 10.1.2 (Sat May 24 21:10:57 EDT 1997) 26047 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4) 26048 # * add xterm-16color, for XFree86 3.3 26049 # 10.1.3 (Sat May 31 12:21:05 EDT 1997) 26050 # * correct typo in emu 26051 # * correct typo in vt102-w (Robert Wuest) 26052 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32. 26053 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997) 26054 # * remove ech capability from rxvt (it does the wrong thing) 26055 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997) 26056 # * remove spurious newlines from several entries (hp+color, wy50, 26057 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm, 26058 # gs6300) 26059 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997) 26060 # * correct rmso capability of wy50-mc 26061 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997) 26062 # * add cbt to xterm-xf86-v32 26063 # * disentangle some entries from 'xterm', preferring xterm-r6 in case 26064 # 'xterm' is derived from xterm-xf86-v32, which implements ech and 26065 # other capabilities not in xterm-r6. 26066 # * remove alternate character set from kterm entry. 26067 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997) 26068 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'. 26069 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997) 26070 # * add xterm-8bit entry. 26071 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997) 26072 # * repair several places where early version of tic replaced \, with \\\, 26073 # * make acsc entries canonical form (sorted, uniq). 26074 # * modify acsc entries for linux, linux-koi8 26075 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b 26076 # * add color, mouse support to kterm. 26077 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997) 26078 # * correct wy120 smxon/tbc capabilities which were stuck together. 26079 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997) 26080 # * add entry for xterm-xf86-v39t 26081 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997) 26082 # * add u8,u9 to sun-il description 26083 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997) 26084 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97 26085 # version. 26086 # * add hds200 description (Walter Skorski) 26087 # * add EMX 0.9b descriptions 26088 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver) 26089 # * rename xhpterm back to hpterm. 26090 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997) 26091 # * change initc in linux-c-nc to use 0..1000 range. 26092 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997) 26093 # * remove hpa/vpa from rxvt, which implements them incorrectly. 26094 # * add sgr0 for rxvt. 26095 # * remove bogus smacs/rmacs from EMX descriptions. 26096 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997) 26097 # * revised entry for att7300 26098 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998) 26099 # * use \0 rather than \200. 26100 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution. 26101 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998) 26102 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset. 26103 # * rename xterm-xf86-v39t to xterm-xf86-v40 26104 # * remove bold/underline from sun console entries since they're not 26105 # implemented. 26106 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998) 26107 # * add beterm entry (Fred Fish) 26108 # * add irix-color/xwsh entry. 26109 # * turn ncv off for linux. 26110 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998) 26111 # * set ncv for FreeBSD console (treat colors with reverse specially). 26112 # * remove sgr string from qnx based on report by Xiaodan Tang 26113 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998) 26114 # * remove spurious commas from descriptions 26115 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4. 26116 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998) 26117 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 26118 # apparently based on cp-866). 26119 # 26120 #-(replaced-changelog-1998/02/28-by-ESR)---------------------------------------- 26121 # 26122 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 26123 # * Replaced minitel-2 entry. 26124 # * Added MGR, ansi-nt. 26125 # * Minor corrections to xterm entries. 26126 # * Replaced EWAN telnet entry. 26127 # * Dropped the reorder script generator. It was a fossil. 26128 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 26129 # * Thorsten Lockert added termcap `bs' to a lot of types, working from 26130 # the 4.4BSD Lite2 file. 26131 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997): 26132 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js. 26133 # * Updated iris-ansi; corrected vt102-w. 26134 # * Switch base xterm entry to 3.3 level. 26135 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997) 26136 # * Added basic4. 26137 # * Removed rmir/smir from tv92B. 26138 # 26139 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998): 26140 # * add hds200 description (Walter Skorski) 26141 # * add beterm entry (Fred Fish) 26142 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color, 26143 # iris-color entries. 26144 # * add emx entries. 26145 # * Replaced unixpc entry with Benjamin Sittler's corrected version. 26146 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's 26147 # versions. 26148 # * remove sgr string from qnx based on report by Xiaodan Tang 26149 # * Added u8/u9, removed rmul/smul from sun-il. 26150 # * 4.2 tic displays \0 rather than \200. 26151 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 26152 # apparently based on cp-866). 26153 # * Merged in Pavel Roskin's acsc for linux-koi8 26154 # * Corrected some erroneous \\'s to \. 26155 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV. 26156 # * II -> ii in pcvtXX, screen, xterm. 26157 # * Removed \n chars following ANSI escapes in sgr & friends. 26158 # * Updated Wyse entries. 26159 # * h19 corrections from Tim Pierce. 26160 # * Noted that the dm2500 has both ich and smir. 26161 # * added pccons for the Alpha under OSF/1. 26162 # * Added Sony NEWS workstation entries and cit101e-rv. 26163 # * Reverted `amiga'; to Kent Polk's version, as I'm told 26164 # the Verkuil entry messes up with Amiga Telnet. 26165 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998): 26166 # * Corrected attributions in 10.2.0 release notes. 26167 # * Scanned the Shuford archive for new terminfos and information. 26168 # * Removed sgr from qnx entry (Thomas Dickey). 26169 # * Added entries for ICL and Kokusai Data Systems terminals. 26170 # * Incorporated NCR terminfos from the Boundless Technology FTP site. 26171 # * Incorporated att700 from the Boundless Technology FTP site. 26172 # * Miscellaneous contact-address and Web-page updates. 26173 # 26174 #-(changelog-beginning-ncurses-4.2)--------------------------------------------- 26175 # 26176 # 1998/5/9 26177 # * add nxterm and xterm-color terminfo description (request by Cristian 26178 # Gafton <gafton (at] redhat.com>). 26179 # * modify rxvt terminfo description to clear alternate screen before 26180 # switching back to normal screen, for compatibility with applications 26181 # which use xterm (reported by Manoj Kasichainula <manojk (at] io.com>). 26182 # * modify linux terminfo description to reset color palette (reported 26183 # by Telford Tendys <telford (at] eng.uts.edu.au>). 26184 # 26185 # 1998/7/4 26186 # * merge changes from current XFree86 xterm terminfo descriptions. 26187 # 26188 # 1998/7/25 26189 # * Added minitel1 entries from Alexander Montaron. 26190 # * Added qnxt2 from Federico Bianchi. 26191 # * Added arm100 terminfo entries from Dave Millen. 26192 # 26193 # 1998/8/6 26194 # * Added ncsa telnet entries from Francesco Potorti 26195 # 26196 # 1998/8/15 26197 # * modify ncsa telnet entry to reflect color, other capabilities based on 26198 # examination of the source code - T.Dickey. 26199 # 26200 # 1998/8/22 26201 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD. 26202 # 26203 # 1998/8/29 26204 # * Added Francesco Potorti's tuned Wyse 99 entries. 26205 # * dtterm enacs correction from Alexander V. Lukyanov. 26206 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version. 26207 # * correct a typo in icl6404 entry. 26208 # * add xtermm and xtermc 26209 # 26210 # 1998/9/26 26211 # * format most %'char' sequences to %{number} 26212 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey 26213 # * merge Data General terminfo from Hasufin <hasufin (at] vidnet.net> - TD 26214 # 26215 # 1998/10/10 26216 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD 26217 # * correct initialization string in xterm-r5, add misc other features 26218 # to correspond with xterm patch #84 - TD 26219 # 26220 # 1998/12/19 26221 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD 26222 # * add Mathew Vernon's mach console entries 26223 # * corrections for ncsa function-keys (report by Larry Virden) 26224 # 26225 # 1998/12/19 26226 # * change linux to use ncv#2, since underline does not work with color - TD 26227 # 26228 # 1999/1/9 26229 # * add kbt to iris-ansi, document other shift/control functionkeys - TD 26230 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad 26231 # application modes, change kent to use the correct keypad code - TD 26232 # 26233 # 1999/1/10 26234 # * add entry for Tera Term - TD 26235 # 26236 # 1999/1/23 26237 # * minor improvements for teraterm entry - TD 26238 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold, 26239 # and bsdos-bold to bsdos-pc (Jeffrey C Honig) 26240 # 26241 # 1999/2/20 26242 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in 26243 # xterm and ncsa entries by removing the unneeded ones. Note that 26244 # some entries will return kend & khome versus kslt and kfnd, for 26245 # PC-style keyboards versus strict vt220 compatibility - TD 26246 # 26247 # 1999/3/13 26248 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard 26249 # tables - TD 26250 # * add 'crt' entry - TD 26251 # * correct typos in 'linux-c' entry - TD 26252 # 26253 # 1999/3/14 26254 # * update entries for BSD/OS console to use klone+sgr and klone+color 26255 # (Jeffrey C Honig) 26256 # 26257 # 1999/3/27 26258 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD. 26259 # 26260 # 1999/4/10 26261 # * add linux-lat, from RedHat patches to ncurses 4.2 26262 # 26263 # 1999/4/17 26264 # * add complete set of default function-key definitions for scoansi - TD. 26265 # 26266 # 1999/7/3 26267 # * add cnorm, cvvis for Linux 2.2 kernels 26268 # 26269 # 1999/7/24 26270 # * add kmous to xterm-r5 -TD 26271 # * correct entries xterm+sl and xterm+sl-twm, which were missing the 26272 # parent "use" clause -TD 26273 # 26274 # 1999/7/31 26275 # * corrected cnorm, added el1 in 'screen' description -TD 26276 # 26277 # 1999/8/14 26278 # * add ms-vt100 -TD 26279 # 26280 # 1999/8/21 26281 # * corrections to beterm entry -TD 26282 # 26283 # 1999/8/28 26284 # * add cygwin entry -TD 26285 # 26286 # 1999/9/4 26287 # * minor corrections for beterm entry -TD 26288 # 26289 # 1999/9/18 26290 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch 26291 # 26292 # 1999/9/25 26293 # * add amiga-8bit entry 26294 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons, 26295 # rcons-color, based on 26296 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src 26297 # * add alias for iris-ansi-net 26298 # 26299 # 1999/10/2 26300 # * corrected scoansi entry's acsc, some function keys, add color -TD 26301 # 26302 # 1999/10/23 26303 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD 26304 # * reorder ncsa entries to make ncsa-vt220 use the alternate function 26305 # key mapping, leaving Potorti's entries more like he named them -TD 26306 # * remove enter/exit am-mode from cygwin -TD 26307 # 26308 # 1999/10/30 26309 # * correct typos in several entries (missing '[' from CSI): 26310 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir 26311 # strings for avt-ns -TD 26312 # * add 'dim' to ncv mask for linux (report by Klaus Weide). 26313 # 26314 # 1999/11/27 26315 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD 26316 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD 26317 # * add xterm-88color and xterm-256color -TD 26318 # 26319 # 1999/12/4 26320 # * add "obsolete" termcap strings -TD 26321 # * add kvt and gnome entries -TD 26322 # 26323 # 1999/12/11 26324 # * correct cup string for regent100 -TD 26325 # 26326 # 2000/1/1 26327 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD 26328 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD 26329 # * change OTrs capabilities to rs2 -TD 26330 # * add obsolete and extended capabilities to 'screen' -TD 26331 # 26332 # 2000/1/5 26333 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts 26334 # with kf10 -TD 26335 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove', 26336 # and adding kcbt -TD 26337 # 26338 # 2000/1/12 26339 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on 26340 # nonstandard resource settings -TD 26341 # 26342 # 2000/2/26 26343 # * minor fixes for xterm-*, based on Debian #58530 -TD 26344 # 26345 # 2000/3/4 26346 # * add several terminal types from esr's "11.0", as well as comments. 26347 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*, 26348 # vt220-8bit, vt220-old, wy85-8bit 26349 # 26350 # 2000/3/18 26351 # * add several terminal types from esr's "11.0.1" (ansi-*). 26352 # * update OTxx capabilities for changes on 2000/3/4. 26353 # * revert part of vt220 change (request by Todd C Miller for OpenBSD) 26354 # 26355 # 2000/3/26 26356 # * move screen's AX extension to ecma+color, modify several entries to 26357 # use that, adjusting ncv as needed -TD 26358 # 26359 # 2000/4/8 26360 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig) 26361 # * correct spelling error in entry name: bq300-rv was given as bg300-rv 26362 # in esr's version. 26363 # 26364 # 2000/4/15 26365 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD 26366 # * correct color definition for ibm3164, make minor changes to other 26367 # IBM terminal definitions based on recent terminfo descriptions -TD 26368 # 26369 # 2000/4/22 26370 # * add mgterm, from NetBSD -TD 26371 # * add alias sun-cgsix for sun-ss5 as per NetBSD 26372 # * change cons25w to use rs2 for reset rather than rs1 -TD 26373 # * add rc/sc to aixterm based on manpage -TD 26374 # 26375 # 2000/5/13 26376 # * remove ncv from xterm-16color, xterm-256color 26377 # 26378 # 2000/6/10 26379 # * add kmous capability to linux to use Joerg Schoen's gpm patch. 26380 # 26381 # 2000/7/1 26382 # * add Eterm (Michael Jennings) 26383 # 26384 # 2000-07-18 26385 # * add amiga-vnc entry. 26386 # 26387 # 2000-08-12 26388 # * correct description of Top Gun Telnet. 26389 # * add kterm-color 26390 # 26391 # 2000-08-26 26392 # * add qansi* entries from QNX ftp site. 26393 # 26394 # 2000-09-16 26395 # * add Matrix Orbital entries by Eric Z. Ayers). 26396 # * add xterm-basic, xterm-sco entries, update related entries to XFree86 26397 # 4.0.1c -TD 26398 # 26399 # 2000-09-17 26400 # * add S0, E0 extensions to screen's entry -TD 26401 # 26402 # 2000-09-23 26403 # * several corrections based on tic's new parameter-checking code -TD 26404 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8 26405 # bracketing sequences that reset video attributes (\E8 would restore 26406 # them) -TD 26407 # 26408 # 2000-11-11 26409 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD 26410 # 26411 # 2000-12-16 26412 # * improved scoansi, based on SCO man-page, and testing console, 26413 # scoterm with tack -TD 26414 # 26415 # 2001-01-27 26416 # * modify kterm to use acsc via SCS controls. 26417 # 26418 # 2001-02-10 26419 # * screen 3.9.8 allows xterm mouse controls to pass-through 26420 # 26421 # 2001-03-11 26422 # * remove spurious "%|" from some xterm entries. 26423 # 26424 # 2001-03-31 26425 # * modify 'screen' khome/kend to match screen 3.09.08 26426 # * add examples of 'screen' customization (screen.xterm-xfree86, 26427 # screen.xterm-r6, screen.teraterm) -TD 26428 # 26429 # 2001-04-14 26430 # * correct definitions of shifted editing keys for xterm-xfree86 -TD 26431 # * add "Apple_Terminal" entries -Benjamin Sittler 26432 # * remove time-delays from "Apple_Terminal" entries -TD 26433 # * make sgr entries time-delays consistent with individual caps -TD 26434 # 26435 # 2001-05-05 26436 # * corrected/updated screen.xterm-xfree86 26437 # 26438 # 2001-05-19 26439 # * ELKS descriptions, from Federico Bianchi 26440 # * add u6 (CSR) to Eterm (Michael Jennings). 26441 # 26442 # 2001-07-21 26443 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's 26444 # tic which handles names no longer than 14 characters. Add 26445 # corresponding descriptions for the Darwin PowerPC console named 26446 # "xnuppc" -Benjamin Sittler 26447 # 26448 # 2001-09-01 26449 # * change kbs in mach entries to ^? (Marcus Brinkmann). 26450 # 26451 # 2001-11-17 26452 # * add "putty" entry -TD 26453 # * updated "Apple_Terminal" entries -Benjamin Sittler 26454 # 26455 # 2001-11-24 26456 # * add ms-vt100-color entry -TD 26457 # * add "konsole" entries -TD 26458 # 26459 # 2001-12-08 26460 # * update gnome entry to Redhat 7.2 -TD 26461 # 26462 # 2002-05-25 26463 # * add kf13-kf48 strings to cons25w -TD 26464 # * add pcvt25-color entry -TD 26465 # * changed a few /usr/lib/tabset -> /usr/share/tabset. 26466 # * improve some features of scoansi entry based on SCO's version -TD 26467 # * add scoansi-new entry corresponding to OpenServer 5.0.6 26468 # 26469 # 2002-06-15 26470 # * add kcbt to screen entry -TD 26471 # 26472 # 2002-06-22 26473 # * add rxvt-16color, ibm+16color, mvterm entries -TD 26474 # 26475 # 2002-09-28 26476 # * split out linux-basic entry, making linux-c inherit from that, and 26477 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect 26478 # the history of this console type -TD 26479 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the 26480 # r/g/b parameters of initc are in the range 0 to 1000 -TD 26481 # 26482 # 2002-10-05 26483 # * minor fix for scale-factor of linux-c and linux-c-nc -TD 26484 # 26485 # 2002-11-09 26486 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2 26487 # in the latter -TD 26488 # 26489 # 2002-11-16 26490 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD 26491 # * ncr260wy350pp has only 16 color pairs -TD 26492 # * add sun-type4 from NetBSD -TD 26493 # * update xterm-xfree86 to current (xterm patch #170) -TD 26494 # * add screen-bce, screen-s entries -TD 26495 # * add xterm-1002, xterm-1003 entries -TD 26496 # 26497 # 2003-01-11 26498 # * update homepage for Top Gun Telnet/SSH 26499 # 26500 # 2003-01-25 26501 # * reduce duplication in emx entries, added emx-base -TD 26502 # 26503 # 2003-05-24 26504 # * corrected acs for screen.teraterm -TD 26505 # * add tkterm entry -TD 26506 # 26507 # 2003-07-15 26508 # * cygwin changes from Charles Wilson: 26509 # misc/terminfo.src (nxterm|xterm-color): make xterm-color 26510 # primary instead of nxterm, to match XFree86's xterm.terminfo 26511 # usage and to prevent circular links. 26512 # (rxvt): add additional codes from rxvt.org. 26513 # (rxvt-color): new alias 26514 # (rxvt-xpm): new alias 26515 # (rxvt-cygwin): like rxvt, but with special acsc codes. 26516 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or 26517 # with a "native" MSWin GUI. Each takes different acsc codes, 26518 # which are both different from the "normal" rxvt's acsc. 26519 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes. 26520 # (cygwinDBG): ditto. 26521 # 26522 # 2003-09-27 26523 # * update gnome terminal entries -TD 26524 # 26525 # 2003-10-04 26526 # * add entries for djgpp 2.03 and 2.04 -TD 26527 # 26528 # 2003-10-25 26529 # * add alias for vtnt -TD 26530 # * update xterm-xfree86 for XFree86 4.4 -TD 26531 # 26532 # 2003-11-22 26533 # * add linux-vt (Andrey V Lukyanov) 26534 # 26535 # 2003-12-20 26536 # * add screen.linux -TD 26537 # 26538 # 2004-01-10 26539 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler) 26540 # 26541 # 2004-01-17 26542 # * add OpenNT/Interix/SFU entries (Federico Bianchi) 26543 # * add vt100+ and vt-utf8 entries -TD 26544 # * add uwin entry -TD 26545 # 26546 # 2004-03-27 26547 # * add sgr strings to several common entries lacking them, e.g., 26548 # screen, to make the entries more portable -TD 26549 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD 26550 # * similar fixups for cvvis/cnorm various entries -TD 26551 # 26552 # 2004-05-22 26553 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD 26554 # 26555 # 2004-06-26 26556 # * add mlterm -TD 26557 # * add xterm-xf86-v44 -TD 26558 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies 26559 # on G1 being used via an ISO-2022 escape sequence (report by 26560 # Juliusz Chroboczek) -TD 26561 # * add 'hurd' entry -TD 26562 # 26563 # 2004-07-03 26564 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than 26565 # xterm-basic -TD 26566 # * align with xterm #192's use of xterm-new -TD 26567 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD 26568 # * make xterm-new the default "xterm" -TD 26569 # 26570 # 2004-07-10 26571 # * minor fixes for emu -TD 26572 # * add emu-220 26573 # * add rmam/smam to linux (Trevor Van Bremen) 26574 # * change wyse acsc strings to use 'i' map rather than 'I' -TD 26575 # * fixes for avatar0 -TD 26576 # * fixes for vp3a+ -TD 26577 # 26578 # 2004-07-17 26579 # * add xterm-pc-fkeys -TD 26580 # * review/update gnome and gnome-rh90 entries (prompted by 26581 # Redhat Bugzilla #122815) -TD 26582 # * review/update konsole entries -TD 26583 # * add sgr, correct sgr0 for kterm and mlterm -TD 26584 # * correct tsl string in kterm -TD 26585 # 26586 # 2004-07-24 26587 # * make ncsa-m rmacs/smacs consistent with sgr -TD 26588 # * add sgr, rc/sc and ech to syscons entries -TD 26589 # * add function-keys to decansi -TD 26590 # * add sgr to mterm-ansi -TD 26591 # * add sgr, civis, cnorm to emu -TD 26592 # * correct/simplify cup in addrinfo -TD 26593 # * corrections for gnome and konsole entries 26594 # (Redhat Bugzilla #122815) -Hans de Goede 26595 # * modify DEC entries (vt220, etc), to add sgr string, and to use 26596 # ISO-2022 strings for rmacs/smacs -TD 26597 # 26598 # 2004-07-31 26599 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD 26600 # 26601 # 2004-08-07 26602 # * improved putty entry -Robert de Bath 26603 # 26604 # 2004-08-14 26605 # * remove dch/dch1 from rxvt because they are implemented inconsistently 26606 # with the common usage of bce/ech -TD 26607 # * remove khome from vt220 (vt220's have no home key) -TD 26608 # * add rxvt+pcfkeys -TD 26609 # 26610 # 2004-08-21 26611 # * modify several entries to ensure xterm mouse and cursor visibility 26612 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm, 26613 # Eterm, screen. (The xterm entries are left alone - old ones for 26614 # compatibility, and the new ones do not require this change) -TD 26615 # 26616 # 2004-08-28 26617 # * add morphos entry -Pavel Fedin 26618 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin 26619 # * corrected \E[5?l to \E[?5l in vt320 entries -TD 26620 # 26621 # 2004-11-20 26622 # * update wsvt25 entry -TD 26623 # 26624 # 2005-01-29 26625 # * update pairs for xterm-88color and xterm-256color to reflect the 26626 # ncurses extended-color support -TD 26627 # 26628 # 2005-02-26 26629 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD 26630 # * add aixterm-16color to demonstrate 16-color capability -TD 26631 # 26632 # 2005-04-23 26633 # * add media-copy to vt100 -TD 26634 # * corrected acsc string for vt52 -TD 26635 # 26636 # 2005-04-30 26637 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for 26638 # xterm-new -TD 26639 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD 26640 # 26641 # 2005-05-07 26642 # * re-corrected acsc string for vt52 -TD 26643 # 26644 # 2005-05-28 26645 # * corrected sun-il sgr string which referred to bold and underline -TD 26646 # * add sun-color entry -TD 26647 # 26648 # 2005-07-23 26649 # * modify sgr0 in several entries to reset alternate-charset as in the 26650 # sgr string -TD 26651 # * modify sgr string of prism9 to better match the individual 26652 # attributes -TD 26653 # 26654 # 2005-10-15 26655 # * correct order of use= in rxvt-basic -TD 26656 # 26657 # 2005-10-26 26658 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD 26659 # 26660 # 2005-11-12 26661 # * other minor fixes to cygwin based on tack -TD 26662 # * correct smacs in cygwin (report by Baurzhan Ismagulov). 26663 # 26664 # 2006-02-18 26665 # * add nsterm-16color entry -TD 26666 # * remove ncv flag from xterm-16color -TD 26667 # * remove setf/setb from xterm-256color to match xterm #209 -TD 26668 # * update mlterm entry to 2.9.2 -TD 26669 # 26670 # 2006-02-25 26671 # * fixes to make nsterm-16color match report 26672 # by Christian Ebert -Alain Bench 26673 # 26674 # 2006-04-22 26675 # * add xterm+256color building block -TD 26676 # * add gnome-256color, putty-256color, rxvt-256color -TD 26677 # 26678 # 2006-05-06 26679 # * add hpterm-color -TD 26680 # 26681 # 2006-06-24 26682 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD 26683 # * add gnome-fc5 (prompted by GenToo #122566) -TD 26684 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench 26685 # * improve xterm-256color by combining the ibm+16color setaf/setab 26686 # strings with SGR 48. The setf/setb strings also are cancelled here 26687 # rather than omitted so derived entries will cancel those also -Alain 26688 # Bench 26689 # 26690 # 2006-07-01 26691 # * add some notes regarding copyright to terminfo.src -TD 26692 # * use rxvt+pcfkeys in Eterm -TD 26693 # * remove km and flash from gnome, Eterm and rxvt since they do not work 26694 # as one would expect (km sends ESC rather than setting the 8th bit 26695 # of the key) -TD 26696 # * add/use ansi+enq, vt100+enq and vt102+enq -TD 26697 # * add konsole-solaris -TD 26698 # 26699 # 2006-07-22 26700 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD 26701 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD 26702 # * modify xterm-24 to inherit from "xterm" -TD 26703 # * add xiterm entry -TD 26704 # * add putty-vt100 entry -TD 26705 # * corrected spelling of Michael A Dorman's name, prompted by 26706 # http://www.advogato.org/person/mdorman/diary.html -TD 26707 # 26708 # 2006-08-05 26709 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD 26710 # * update xterm+pcfkeys to match xterm #216 -TD 26711 # 26712 # 2006-08-17 26713 # * make descriptions of xterm entries consistent with its terminfo -TD 26714 # 26715 # 2006-08-26 26716 # * add xfce, mgt -TD 26717 # 26718 # 2006-09-02 26719 # * correct acsc string in kterm -TD 26720 # 26721 # 2006-09-09 26722 # * add kon entry -TD 26723 # * remove invis from linux and related entries, add klone+sgr8 for those 26724 # that implement the feature (or have not been shown to lack it) -TD 26725 # 26726 # 2006-09-23 26727 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD 26728 # * minor improvements to rxvt+pcfkeys -TD 26729 # 26730 # 2006-09-30 26731 # * fix a few typos in if/then/else expressions -TD 26732 # 26733 # 2006-10-07 26734 # * add several GNU Screen variations with 16- and 256-colors, and 26735 # status line (Alain Bench). 26736 # 26737 # 2007-03-03 26738 # * add Newbury Data entries (Jean-Charles Billaud). 26739 # 26740 # 2007-06-10 26741 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD 26742 # 26743 # 2007-07-14 26744 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD 26745 # * add konsole-256color entry -TD 26746 # 26747 # 2007-08-18 26748 # * add 9term entry (request by Juhapekka Tolvanen) -TD 26749 # 26750 # 2007-10-13 26751 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD 26752 # * add shift-control- and control-modified keys for rxvt editing 26753 # keypad -TD 26754 # * update mlterm entry to 2.9.3 -TD 26755 # * add mlterm+pcfkeys -TD 26756 # 26757 # 2007-10-20 26758 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to 26759 # xterm+pcc0, etc., to make the corresponding building blocks reflect 26760 # xterm's capabilities -TD 26761 # * add mrxvt entry -TD 26762 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD 26763 # 26764 # 2007-11-03 26765 # * correct acsc strings for h19 and z100 (Benjamin Sittler) 26766 # 26767 # 2007-11-11 26768 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to 26769 # xterm starting with xterm patch #216 -TD 26770 # * make legacy xterm entries such as xterm-24 inherit from xterm-old, 26771 # to match xterm #230 -TD 26772 # * extend xterm+pccX entries to match xterm #230 -TD 26773 # * add xterm+app, xterm+noapp, from xterm #230 -TD 26774 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD 26775 # 26776 # 2008-04-19 26777 # * add screen.rxvt -TD 26778 # 26779 # 2008-04-28 26780 # * add screen+fkeys (prompted by Debian #478094) -TD 26781 # 26782 # 2008-06-28 26783 # * add screen.mlterm -TD 26784 # * improve mlterm and mlterm+pcfkeys -TD 26785 # 26786 # 2008-08-23 26787 # * add Eterm-256color, Eterm-88color -TD 26788 # * add rxvt-88color -TD 26789 # 26790 # 2008-10-12 26791 # * add teraterm4.59 entry, use that as primary teraterm entry, rename 26792 # original to teraterm2.3 -TD 26793 # * update "gnome" to 2.22.3 -TD 26794 # * update "konsole" to 1.6.6 -TD 26795 # * add "aterm" -TD 26796 # * add "linux2.6.26" -TD 26797 # 26798 # 2008-11-15 26799 # * change several \E[2g (clear tab at current column) to \E[3g 26800 # (clear all tabs) to match definition for tbc capability -TD 26801 # 26802 # 2008-11-29 26803 # * add eterm-color -TD 26804 # 26805 # 2009-01-10 26806 # * add screen.Eterm -TD 26807 # 26808 # 2009-03-28 26809 # * correct typo in pfkey of ansi.sys-old 26810 # (report by Kalle Olavi Niemitalo) 26811 # * move function- and cursor-keys from emx-base to ansi.sys, and create 26812 # a pfkey capability which handles F1-F48 -TD 26813 # 26814 # 2009-05-02 26815 # * add vwmterm entry (Bryan Christ) 26816 # 26817 # 2009-09-19 26818 # * change ncv and op capabilities in sun-color to match Sun's entry for 26819 # this (report by Laszlo Peter) 26820 # * improve interix smso by using reverse rather than bold (report by 26821 # Kristof Zelechovski). 26822 # 26823 # 2009-10-03 26824 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim) 26825 # * add linux-16color (Benjamin Sittler) 26826 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler) 26827 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler) 26828 # * add ccc and initc capabilities to xterm-16color -TD 26829 # 26830 # 2009-10-31 26831 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201) 26832 # 26833 # 2009-12-12 26834 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta) 26835 # 26836 # 2009-12-19 26837 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler) 26838 # * rename minix to minix-1.7, add minix entry for Minix3 -TD 26839 # 26840 # 2009-12-26 26841 # * add bterm (bogl 0.1.18) -TD 26842 # * minor fix to rxvt+pcfkeys -TD 26843 # 26844 # 2010-02-06 26845 # * update mrxvt to 0.5.4, add mrxvt-256color -TD 26846 # 26847 # 2010-02-13 26848 # * add several screen-bce.XXX entries -TD 26849 # 26850 # 2010-02-23 26851 # * modify screen-bce.XXX entries to exclude ech, since screen's color 26852 # model does not clear with color for that feature -TD 26853 # 26854 # 2010-03-20 26855 # * rename atari and st52 to atari-old, st52-old, use newer entries from 26856 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane). 26857 # 26858 # 2010-06-12 26859 # * add mlterm-256color entry -TD 26860 # 26861 # 2010-07-17 26862 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends 26863 # the alternate character set (patch by Nicholas Marriott) 26864 # 26865 # 2010-08-28 26866 # * improve acsc for vt52 (Benjamin Sittler) 26867 # * modify nsterm entries for consistent sgr/sgr0 -TD 26868 # * modify xnuppc entries for consistent sgr/sgr0 -TD 26869 # * add invis to tek4115 sgr -TD 26870 # 26871 # 2010-09-11 26872 # * reformat acsc strings to canonical format -TD 26873 # 26874 # 2010-09-25 26875 # * add "XT" capability to entries for terminals that support both 26876 # xterm-style mouse- and title-controls, for "screen" which 26877 # special-cases TERM beginning with "xterm" or "rxvt" -TD 26878 # 26879 # 2010-10-02 26880 # * fill in no-parameter forms of cursor-movement where a parameterized 26881 # form is available -TD 26882 # * fill in missing cursor controls where the form of the controls is 26883 # ANSI -TD 26884 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD 26885 # 26886 # 2010-10-09 26887 # * correct comparison used for setting 16-colors in linux-16color 26888 # entry (Novell #644831) -TD 26889 # * improve linux-16color entry, using "dim" for color-8 which makes it 26890 # gray rather than black like color-0 -TD 26891 # 26892 # 2010-11-20 26893 # * make "vte" the principal entry defining "gnome", since GNOME terminal 26894 # is merely one of several terminals whose behavior is provided by this 26895 # library -TD 26896 # 26897 # 2010-11-27 26898 # * fix typo in rmso for tek4106 -Goran Weinholt 26899 # 26900 # 2010-12-11 26901 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno 26902 # * also suppress ncv in konsole-base -TD 26903 # 26904 # 2011-02-05 26905 # * add U8 feature to denote entries for terminal emulators which do not 26906 # support VT100 SI/SO when processing UTF-8 encoding -TD 26907 # * add xterm-utf8 as a demo of the U8 feature -TD 26908 # 26909 # 2011-02-20 26910 # * add cons25-debian entry (Brian M Carlson, Debian #607662). 26911 # 26912 # 2011-06-11 26913 # * update minix entry to minix 3.2 (Thomas Cort). 26914 # 26915 # 2011-07-09 26916 # * fix inconsistent tabset path in pcmw (Todd C. Miller). 26917 # * remove a backslash which continued comment, obscuring altos3 26918 # definition with OpenBSD toolset (Nicholas Marriott). 26919 # 26920 # 2011-07-16 26921 # * add/use xterm+tmux chunk from xterm #271 -TD 26922 # * resync xterm-new entry from xterm #271 -TD 26923 # * add E3 extended capability to linux-basic (Miroslav Lichvar) 26924 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD 26925 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD 26926 # 26927 # 2011-07-21 26928 # * add kich1 to sun (Yuri Pankov) 26929 # * use bold rather than reverse for smso in sun-color (Yuri Pankov). 26930 # 26931 # 2011-08-06 26932 # * corrected k9 in dg460-ansi, add other features based on manuals -TD 26933 # 26934 # 2011-08-20 26935 # * minor cleanup of X-terminal emulator section -TD 26936 # * add terminator entry -TD 26937 # * add simpleterm entry -TD 26938 # 26939 # 2011-09-10 26940 # * add xterm+kbs fragment from xterm #272 -TD 26941 # 26942 # 2011-11-12 26943 # * add pccon entries for OpenBSD console (Alexei Malinin) 26944 # 26945 # 2011-12-17 26946 # * corrected old changelog comments -TD 26947 # 26948 # 2011-11-24 26949 # * add putty-sco -TD 26950 # 26951 # 2012-01-28 26952 # * add mach-gnu (Samuel Thibault) 26953 # * add mach-gnu-color, tweaks to mach-gnu -TD 26954 # * make sgr for sun-color agree with smso -TD 26955 # * make sgr for prism9 agree with other caps -TD 26956 # * make sgr for icl6404 agree with other caps -TD 26957 # * make sgr for ofcons agree with other caps -TD 26958 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD 26959 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD 26960 # * make sgr for avt-ns agree with other caps -TD 26961 # 26962 # 2012-02-11 26963 # * make sgr for xterm-pcolor agree with other caps -TD 26964 # * make sgr for att5425 agree with other caps -TD 26965 # * make sgr for att630 agree with other caps -TD 26966 # * make sgr for linux entries agree with other caps -TD 26967 # * make sgr for tvi9065 agree with other caps -TD 26968 # * make sgr for ncr260vt200an agree with other caps -TD 26969 # * make sgr for ncr160vt100pp agree with other caps -TD 26970 # * make sgr for ncr260vt300an agree with other caps -TD 26971 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD 26972 # * make sgr for cygwin, cygwinDBG agree with other caps -TD 26973 # 26974 # 2012-03-31 26975 # * correct order of use-clauses in st-256color -TD 26976 # 26977 # 2012-04-01 26978 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD 26979 # 26980 # 2012-04-14 26981 # * document all of the user-defined capabilities in one place -TD 26982 # * add XT to some places to improve usefulness for other applications 26983 # than screen, which would like to pretend that xterm's title is 26984 # a status-line. -TD 26985 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review 26986 # of ordering and overrides -TD 26987 # 26988 # 2012-04-21 26989 # * add msgr to vt420, similar DEC vtXXX entries -TD 26990 # * add several missing vt420 capabilities from vt220 -TD 26991 # * factor out ansi+pp from several entries -TD 26992 # * change xterm+sl and xterm+sl-twm to include only the status-line 26993 # capabilities and not "use=xterm", making them more generally useful 26994 # as building-blocks -TD 26995 # * add dec+sl building block, as example -TD 26996 # 26997 # 2012-04-28 26998 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD 26999 # * add eslok flag to dec+sl -TD 27000 # * dec+sl applies to vt320 and up -TD 27001 # * drop wsl width from xterm+sl -TD 27002 # * reuse xterm+sl in putty and nsca-m -TD 27003 # * add ansi+tabs to vt520 -TD 27004 # * add ansi+enq to vt220-vt520 -TD 27005 # 27006 # 2012-05-05 27007 # * remove p6 (bold) from opus3n1+ for consistency -TD 27008 # * remove acs stuff from env230 per clues in Ingres termcap -TD 27009 # * modify env230 sgr/sgr0 to match other capabilities -TD 27010 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD 27011 # * make sgr for dku7202 agree with other caps -TD 27012 # * make sgr for ibmpc agree with other caps -TD 27013 # * make sgr for tek4107 agree with other caps -TD 27014 # * make sgr for ndr9500 agree with other caps -TD 27015 # * make sgr for sco-ansi agree with other caps -TD 27016 # * make sgr for d410 agree with other caps -TD 27017 # * make sgr for d210 agree with other caps -TD 27018 # * make sgr for d470c, d470c-7b agree with other caps -TD 27019 # 27020 # 2012-05-12 27021 # * rewrite vt520 entry based on vt420 -TD 27022 # * corrected 'op' for bterm (report by Samuel Thibault) -TD 27023 # 27024 # 2012-06-02 27025 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord, 27026 # analysis by Martin Husemann). 27027 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by 27028 # Onno van der Linden). 27029 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD 27030 # * add kdch1, etc., to qvt108 -TD 27031 # * add dl1/il1 to some entries based on dl/il values -TD 27032 # * add dl to simpleterm -TD 27033 # 27034 # 2012-06-10 27035 # * modify some older xterm entries to align with xterm source -TD 27036 # * separate "xterm-old" alias from "xterm-r6" -TD 27037 # 27038 # 2012-07-28 27039 # * add E3 to xterm-basic and putty -TD 27040 # 27041 # 2012-08-11 27042 # * add nsterm-256color, make this the default nsterm -TD 27043 # * remove bw from nsterm-bce, per testing with tack -TD 27044 # 27045 # 2012-10-12 27046 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome 27047 # (patch by Christian Persch). 27048 # 27049 # 2012-11-02 27050 # * reviewed vte-2012, reverted most of the change since it was incorrect 27051 # based on testing with tack -TD 27052 # * un-cancel the initc in vte-256color, since this was implemented 27053 # starting with version 0.20 in 2009 -TD 27054 # 27055 # 2013-03-16 27056 # * correct typo in sgr string for sun-color, 27057 # add bold for consistency with sgr, 27058 # change smso for consistency with sgr -TD 27059 # * correct typo in sgr string for terminator -TD 27060 # * add blink to the attributes masked by ncv in linux-16color (report 27061 # by Benjamin Sittler) 27062 # 27063 # 2013-03-23 27064 # * change initialization for vt220, similar entries for consistency 27065 # with cursor-key strings (NetBSD #47674) -TD 27066 # * further improvements to linux-16color (Benjamin Sittler) 27067 # 27068 # 2013-05-11 27069 # * move nsterm-related entries out of "obsolete" section to more 27070 # plausible "ansi consoles" -TD 27071 # * additional cleanup of table-of-contents by reordering -TD 27072 # 27073 # 2013-06-07 27074 # * added note to clarify Terminal.app's non-emulation of the various 27075 # terminal types listed in the preferences dialog -TD 27076 # 27077 # 2013-11-02 27078 # * use TS extension to describe xterm's title-escapes -TD 27079 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD 27080 # * update hurd.ti, add xenl to reflect 2011-03-06 change in 27081 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c 27082 # (Debian #727119). 27083 # * simplify pfkey expression in ansi.sys -TD 27084 # 27085 # 2013-11-10 27086 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD 27087 # 27088 # 2014-02-22 27089 # * updated notes for wsvt25 based on tack and vttest -TD 27090 # * add teken entry to show actual properties of FreeBSD's "xterm" 27091 # console -TD 27092 # 27093 # 2014-03-22 27094 # * add terminology entry -TD 27095 # * add mlterm3 entry, use that as "mlterm" -TD 27096 # * inherit mlterm-256color from mlterm -TD 27097 # 27098 # 2014-03-23 27099 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD 27100 # 27101 # 2014-03-30 27102 # * cancel ccc in putty-256color and konsole-256color for consistency 27103 # with the cancelled initc capability (patch by Sven Zuhlsdorf). 27104 # * add xterm+256setaf building block for various terminals which only 27105 # get the 256-color feature half-implemented -TD 27106 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to 27107 # 0.4.1 -TD 27108 # 27109 # 2014-05-03 27110 # * add vt520ansi (Mike Gran) 27111 # 27112 # 2014-05-24 27113 # * correct several entries which had termcap-style padding used in 27114 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD 27115 # * correct syntax for padding in some entries: dg211, h19 -TD 27116 # * correct ti924-8 which had confused padding versus octal escapes -TD 27117 # * correct padding in sbi entry -TD 27118 # 27119 # 2014-06-07 27120 # * update xterm-new to xterm patch #305 -TD 27121 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3 27122 # (italic). This was a long-ago typo in screen 3.1.1 which was 27123 # overlooked until a few terminal emulators implemented the feature -TD 27124 # 27125 # 2014-06-09 27126 # > fix regression in screen terminfo entries (reports by Christian 27127 # Ebert, Gabriele Balducci) -TD 27128 # + revert the change to screen; see notes for why this did not work -TD 27129 # + cancel sitm/ritm for entries which extend "screen", to work around 27130 # screen's hardcoded behavior for SGR 3 -TD 27131 # 27132 # 2014-06-14 27133 # + modify sgr for screen.xterm-new to support dim capability -TD 27134 # + add dim capability to nsterm+7 -TD 27135 # + cancel dim capability for iterm -TD 27136 # + add dim, invis capabilities to vte-2012 -TD 27137 # + add sitm/ritm to konsole-base and mlterm3 -TD 27138 # 27139 # 2014-10-06 27140 # + add xterm-1005 and xterm-1006 entries, with suggested extension 27141 # capability "xm" -TD 27142 # 27143 # 2014-10-07 27144 # + update test-report for mrxvt -TD 27145 # 27146 # 2014-10-11 27147 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD 27148 # 27149 # 2014-10-18 27150 # + reviewed terminology 0.6.1, add function key definitions. None of 27151 # the vt100-compatibility issues were improved -TD 27152 # 27153 # 2015-04-22 27154 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel) 27155 # + add several key definitions to nsterm-bce to match preconfigured 27156 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel) 27157 # 27158 # 2015-05-02 27159 # + remove unnecessary ';' from E3 capabilities -TD 27160 # + add tmux entry, derived from screen (patch by Nicholas Marriott). 27161 # + split-out recent change to nsterm-bce as nsterm-build326, and add 27162 # nsterm-build342 to reflect changes with successive releases of OSX 27163 # (discussion with Leonardo B Schenkel) 27164 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell, 27165 # Debian #783806) 27166 # 27167 # 2015-05-17 27168 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD 27169 # + add several screen.XXX entries to support the respective variations 27170 # for 256 colors -TD 27171 # 27172 # 2015-05-23 27173 # + add putty+fnkeys* building-block entries -TD 27174 # 27175 # 2015-05-30 27176 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD 27177 # + add vte-2014, update vte to use that -TD 27178 # 27179 # 2015-06-27 27180 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color 27181 # from xterm-new (report by Richard Birkett) -TD 27182 # 27183 # 2015-07-25 27184 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott). 27185 # + fixes for st 0.5 from testing with tack -TD 27186 # 27187 # 2015-10-24 27188 # + updated minitel entries to fix kel problem with emacs, and add 27189 # minitel1b-nb (Alexandre Montaron). 27190 # + reviewed/updated nsterm entry Terminal.app in OSX -TD 27191 # + replace some dead URLs in commands with equivalents from the 27192 # Internet Archive -TD 27193 # 27194 # 2015-11-14 27195 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron). 27196 # + add keys f12-f124 to pccon+keys (Tati Chevron). 27197 # 27198 # 2015-11-21 27199 # + fix some inconsistencies in the pccon* entries -TD 27200 # 27201 # 2015-11-28 27202 # + add viewdata (Alexandre Montaron). 27203 # 27204 # 2016-01-16 27205 # + tidy up comments about hardcoded 256color palette (report by 27206 # Leonardo Brondani Schenkel) -TD 27207 # + add putty-noapp entry, and amend putty entry to use application mode 27208 # for better consistency with xterm (report by Leonardo Brondani 27209 # Schenkel) -TD 27210 # 27211 # 2016-04-23 27212 # + add 'oc' capability to xterm+256color, allowing palette reset for 27213 # xterm -TD 27214 # 27215 # 2016-05-14 27216 # + modify linux2.6 entry to improve line-drawing -TD 27217 # + make linux3.0 entry the default linux entry (Debian #823658) -TD 27218 # 27219 # 2016-05-29 27220 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to 27221 # reset palette using "oc" string as in linux -TD 27222 # 27223 # 2016-06-11 27224 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses 27225 # that could be returned -TD 27226 # + added a few capabilities fixed in recent vte -TD 27227 # 27228 # 2016-08-17 27229 # + correct a typo in interix -TD 27230 # 27231 # 2016-09-24 27232 # + updated minitel entries to use status line with screen(1), as well as 27233 # printing special G2 videotex chars like french accentuated glyph 27234 # using special cap XC= (patch by Alexandre Montaron). 27235 # 27236 # 2016-10-01 27237 # + add linux-m1 minitel entries (patch by Alexandre Montaron). 27238 # + correct rs2 string for vt100-nam -TD 27239 # 27240 # 2016-11-26 27241 # + modify linux-16color to not mask dim, standout or reverse with the 27242 # ncv capability -TD 27243 # + add 0.1sec mandatory delay to flash capabilities using the VT100 27244 # reverse-video control -TD 27245 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6 27246 # entry, to avoid conflict with the user-defined mapping. The reset 27247 # feature will use ISO-8859-1 in any case (Mikulas Patocka). 27248 # 27249 # 2016-12-30 27250 # + merge current st description (report by Harry Gindi) -TD 27251 # 27252 # 2016-12-31 27253 # + modify flash capability for linux and wyse entries to put the delay 27254 # between the reverse/normal escapes rather than after -TD 27255 # 27256 # 2017-01-28 27257 # + minor comment-fixes to help automate links to bug-urls -TD 27258 # + add dvtm, dvtm-256color -TD 27259 # + add settings corresponding to xterm-keys option to tmux entry to 27260 # reflect upcoming change to make that option "on" by default 27261 # (patch by Nicholas Marriott). 27262 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott). 27263 # + add dumb-emacs-ansi -TD 27264 # 27265 # 2017-03-05 27266 # + correct a few spelling errors in comments -TD 27267 # + add fbterm -TD 27268 # 27269 # 2017-03-11 27270 # + add vt100+4bsd building block, use that for older terminals rather 27271 # than "vt100" which is now mostly used as a building block for 27272 # terminal emulators -TD 27273 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions 27274 # (report/analysis by Robert King) -TD 27275 # 27276 # 2017-04-01 27277 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD 27278 # + add smso for env230, to match sgr -TD 27279 # + remove p7/protect from sgr in fbterm -TD 27280 # + drop setf/setb from fbterm; setaf/setab are enough -TD 27281 # + make xterm-pcolor sgr consistent with other capabilities -TD 27282 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic 27283 # (discussion with Nicholas Marriott) 27284 # 27285 # 2017-04-22 27286 # + correct missing comma-separator between string capabilities in 27287 # icl6402 and m2-nam -TD 27288 # + update formatting with ncurses 6.0.20170422 -TD 27289 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc, 27290 # add alias ansiterm (report by Robert King). 27291 # 27292 # 2017-05-13 27293 # + reformatted using hexadecimal numbers to improve readability -TD 27294 # 27295 # 2017-07-29 27296 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD 27297 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard) 27298 # + add "rep" to xterm-new, available since 1997/01/26 -TD 27299 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain 27300 # Williams) -TD 27301 # 27302 # 2017-08-16 27303 # + update "iterm" entry -TD 27304 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD 27305 # 27306 # 2017-08-18 27307 # + update notes on user-defined capabilities -TD 27308 # 27309 # 2017-08-26 27310 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD 27311 # 27312 # 2017-11-11 27313 # + add "op" to xterm+256setaf -TD 27314 # + reviewed terminology 1.0.0 -TD 27315 # + reviewed st 0.7 -TD 27316 # 27317 # 2017-11-18 27318 # + modify old terminology entry and a few other terminal emulators to 27319 # account for xon -TD 27320 # + correct sgr string for tmux, which used screen's "standout" code 27321 # rather than the standard code (patch by Roman Kagan) 27322 # + correct sgr/sgr0 strings in a few other cases reported by tic, making 27323 # those correspond to the non-sgr settings where they differ, but 27324 # otherwise use ECMA-48 consistently: 27325 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b, 27326 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an, 27327 # st-0.7, vi603, vwmterm -TD 27328 # 27329 # 2017-12-30 27330 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title 27331 # blocks from xterm #331 -TD 27332 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm 27333 # #331 -TD 27334 # + modify xterm+256color and xterm+256setaf to use correct number of 27335 # color pairs, for ncurses 6.1 -TD 27336 # + add rs1 capability to xterm-256color -TD 27337 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to 27338 # match xterm #272, reflecting packager's changes -TD 27339 # + remove "boolean" Se, Ss from st-0.7 -TD 27340 # 27341 # 2018-01-04 27342 # + add konsole-direct and st-direct -TD 27343 # + remove unsupported "Tc" capability from st-0.7; use st-direct if 27344 # direct-colors are wanted -TD 27345 # 27346 # 2018-01-17 27347 # + add vte-direct -TD 27348 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by 27349 # Pierre Carru) 27350 # 27351 # 2018-01-21 27352 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD 27353 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006 27354 # mode does not work with those programs. konsole is debatable -TD 27355 # + add "termite" entry (report by Markus Pfeiffer) -TD 27356 # 27357 # 2018-01-27 27358 # + trim "XT" from screen entry -TD 27359 # + modify iterm to use xterm+sl-twm building block -TD 27360 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting 27361 # konsole's removal in 2008 -TD 27362 # + expanded the history section of konsole to explain its flawed 27363 # imitation of xterm's keyboard -TD 27364 # + use xterm+x11mouse in screen.* entries because screen does not yet 27365 # support xterm's 1006 mode -TD 27366 # + add nsterm-build400 for macOS 10.13 -TD 27367 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD 27368 # + update vte to vte-2017 -TD 27369 # + add ecma+strikeout to vte-2017 -TD 27370 # + add iterm2-direct -TD 27371 # + updated teraterm, added teraterm-256color -TD 27372 # + add mlterm-direct -TD 27373 # + add descriptions for ANSI building-blocks -TD 27374 # 27375 # 2018-02-24 27376 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD 27377 # + fix remaining flash capabilities with trailing mandatory delays -TD 27378 # 27379 # 2018-03-17 27380 # + trim some redundant capabilities from st-0.7 -TD 27381 # + trim unnecessary setf/setb from interix -TD 27382 # 27383 # 2018-05-19 27384 # + trim spurious whitespace from tmux in 2018-02-24 changes; 27385 # fix some inconsistencies in/between tmux- and iterm2-entries for SGR 27386 # (report by C Anthony Risinger) 27387 # + improve iterm2 using some xterm features which it has adapted -TD 27388 # 27389 # 2018-06-30 27390 # + add acsc string to vi200 (Nibby Nebbulous) 27391 # add right/down-arrow to vi200's acsc -TD 27392 # 27393 # 2018-07-21 27394 # + corrected acsc for wy50 -TD 27395 # + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD 27396 # + remove ansi+rep mis-added to interix in 2018-02-23 -TD 27397 # 27398 # 2018-07-28 27399 # + fix typo in tvi955 -TD 27400 # + corrected acsc for regent60 -TD 27401 # + add alias n7900 -TD 27402 # 27403 # 2018-09-29 27404 # + corrected acsc for tvi950 -TD 27405 # + remove bogus kf0 from tvi950 -TD 27406 # + added function-key definitions to agree with TeleVideo 950 manual -TD 27407 # + add bel to tvi950 -TD 27408 # + add shifted function-keys to regent60 -TD 27409 # + renumber regent40 function-keys to match manual -TD 27410 # + add cd (clr_eos) to adds200 -TD 27411 # 27412 # 2018-10-27 27413 # + add OpenGL clients alacritty and kitty -TD 27414 # + add Smulx for tmux, vte-2018 -Nicholas Marriott 27415 # 27416 # 2018-12-15 27417 # + fix a typo in comments (Aaron Gyes). 27418 # + add nsterm-build309 to replace nsterm-256color, assigning the latter 27419 # as an alias of nsterm, to make mouse work with nsterm-256color -TD 27420 # + base gnome-256color entry on "gnome", not "vte", for consistency -TD 27421 # 27422 # 2019-01-12 27423 # + add nsterm-direct -TD 27424 # + use SGR 1006 mouse for konsole-base -TD 27425 # + use SGR 1006 mouse for putty -TD 27426 # + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker) 27427 # 27428 # 2019-02-23 27429 # + fix typo in adds200 -TD 27430 # 27431 # 2019-03-30 27432 # + add "screen5", to mention italics (report by Stefan Assmann) 27433 # + modify description of xterm+x11hilite to eliminate unused p5 -TD 27434 # 27435 # 2019-05-18 27436 # + update xterm-new to xterm patch #345 -TD 27437 # + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD 27438 # + update terminator entry -TD 27439 # + remove hard-tabs from ti703 (report by Robert Clausecker) 27440 # + add Smol/Rmol for mintty, vte-2018 -Nicholas Marriott 27441 # 27442 # 2019-06-01 27443 # + add rs1 to konsole, mlterm -TD 27444 # 27445 # 2019-06-08 27446 # + add mintty, mintty-direct (Thomas Wolff) 27447 # 2019-06-09 27448 # + comment-out some user-defined capabilities in mintty+common to allow 27449 # builds with existing releases 5.9-6.1 -TD 27450 # 27451 # 2019-06-30 27452 # + add ms-terminal -TD 27453 # + add vscode, vscode-direct -TD 27454 # + use ecma+index in screen, st -TD 27455 # 27456 # 2019-07-06 27457 # + add domterm -TD 27458 # + improve comments for recent changes, add alias xterm.js -TD 27459 # 27460 # 2019-08-03 27461 # + amend the change to screen, because tmux relies upon that entry 27462 # and does not support that feature (Debian #933572) -TD 27463 # + updated ms-terminal entry & notes -TD 27464 # + updated kitty entry & notes -TD 27465 # + updated alacritty+common entry & notes -TD 27466 # + use xterm+sl-twm for consistency -TD 27467 # 27468 # 2019-09-22 27469 # + correct a comment -TD 27470 # 27471 # 2019-10-26 27472 # + modify linux-16color to accommodate Linux console driver change in 27473 # early 2018 (report by Dino Petrucci). 27474 # 27475 # 2019-11-02 27476 # + add "xterm-mono" to help packagers (report by Sven Joachim) -TD 27477 # 27478 # 2019-11-09 27479 # + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility 27480 # with old non-curses programs -TD 27481 # + reviewed st 0.8.2, updated some details -TD 27482 # + use ansi+rep several places -TD 27483 # 27484 # 2020-01-12 27485 # + update alacritty entries for 0.4.0 (prompted by patch by 27486 # Christian Duerr) -TD 27487 # 27488 # 2020-01-18 27489 # + spelling fixes per codespell -TD 27490 # + improve xm example for xterm+x11mouse, xterm+sm+1006 -TD 27491 # 27492 # 2020-02-22 27493 # + improve vt50h and vt52 based on DECScope manual -TD 27494 # + add/use vt52+keypad and vt52-basic -TD 27495 # 27496 # 2020-04-18 27497 # + use vt52+keypad in xterm-vt52, from xterm #354 -TD 27498 # 27499 # 2020-04-25 27500 # + use vt100+fnkeys in putty -TD 27501 # 27502 # 2020-05-02 27503 # + add details on the change to Linux SGR 21 in 2018 -TD 27504 # + add xterm-direct16 and xterm-direct256 -TD 27505 # 27506 # 2020-05-03 27507 # + fix some dead URLs -TD 27508 # 27509 # 2020-05-16 27510 # + update notes on vscode / xterm.js -TD 27511 # 27512 # 2020-05-30 27513 # + re-enable "bel" in konsole-base (report by Nia Huang) 27514 # + add linux-s entry (patch by Alexandre Montaron). 27515 # 27516 # 2020-06-06 27517 # + add xterm+256color2, xterm+88color2, to deprecate nonstandard usage 27518 # in xterm+256color, xterm+88color -TD 27519 # + add shifted Linux console keys in linux+sfkeys entry for 27520 # screen.linux (report by Alexandre Montaron). 27521 # + use vt100+enq in screen (report by Alexandre Montaron). 27522 # + add screen.linux-s alias (suggested by Alexandre Montaron). 27523 # 27524 # 2020-07-11 27525 # + fix pound-sign mapping in acsc of linux2.6 entry (report by Ingo 27526 # Bruckl). 27527 # 27528 # 2020-08-28 27529 # + correct icl6404 csr (report by Florian Weimer). 27530 # + correct ti916 cup (report by Florian Weimer). 27531 # + improve ndr9500 (report by Florian Weimer). 27532 # 27533 # 2020-09-05 27534 # + correct description of vt330/vt340 (Ross Combs). 27535 # 27536 # 2020-09-19 27537 # + update mlterm3 for 3.9.0 (report by Premysl Eric Janouch). 27538 # 27539 # 2020-09-29 27540 # + add tmux-direct (tmux #2370) 27541 # + simplify mlterm initialization with DECSTR -TD 27542 # + change tmux's kbs to ^? (report by Premysl Eric Janouch) 27543 # 27544 # 2020-10-10 27545 # + correct sgr in aaa+rv (report by Florian Weimer) -TD 27546 # + fix some sgr inconsistencies in d230c, ibm6153, ibm6154, 27547 # ncrvt100an -TD 27548 # 27549 # 2020-10-17 27550 # + expanded notes about tek4107 -TD 27551 # 27552 # 2020-11-07 27553 # + update kitty+common -TD 27554 # + add putty+screen and putty-screen (suggested by Alexandre Montaron). 27555 # 27556 # 2020-11-28 27557 # + add Smulx to alacritty (Christian Duerr). 27558 # + add rep to PuTTY -TD 27559 # + add putty+keypad -TD 27560 # 27561 # 2020-12-05 27562 # + correct mlterm3 kf1-kf4 (Debian #975322) -TD 27563 # + add flash to mlterm3 -TD 27564 # 27565 # 2020-12-27 27566 # + update terminology to 1.8.1 -TD 27567 # 27568 # 2021-01-16 27569 # + add comment for linux2.6 regarding CONFIG_CONSOLE_TRANSLATIONS 27570 # (report by Patrick McDermott) -TD 27571 # 27572 # 2021-01-25 27573 # + split-out att610+cvis, vt220+cvis, vt220+cvis8 -TD 27574 # + add vt220-base, for terminal emulators which generally have not 27575 # supported att610's blinking cursor control -TD 27576 # + use vt220+cvis in vt220, etc -TD 27577 # + use att610+cvis, xterm+tmux and ansi+enq in kitty -TD 27578 # + use vt220+cvis in st, terminology, termite since they ignore 27579 # blinking-cursor detail in att610+cvis -TD 27580 # 27581 # 2021-02-20 27582 # + add/use vt220+pcedit and vt220+vtedit -TD 27583 # + add scrt/securecrt and absolute -TD 27584 # + add nel to xterm-new, though supported since X11R5 -TD 27585 # + add/use xterm+nofkeys -TD 27586 # + move use of ecma+italics from xterm-basic to xterm+nofkeys -TD 27587 # 27588 # 2021-02-27 27589 # + remove a duplicate "use" in xterm-vt220 -TD 27590 # 27591 # 2021-03-14 27592 # + correct use-ordering in some xterm-direct flavors -TD 27593 # 27594 # 2021-03-20 27595 # + add hterm, hterm-256color (Mike Frysinger) 27596 # 27597 # 2021-06-26 27598 # + use default colors in pccon "op" -TD 27599 # + correct rmacs/smacs in aaa+dec, aaa+rv -TD 27600 # + add hpterm-color2 and hp98550-color (Martin Trusler) 27601 # 27602 # 2021-07-17 27603 # + correct typo in "vip" comments (report by Nick Black), reviewed this 27604 # against Glink manual -TD 27605 # + fill in some missing pieces for pccon, to make it comparable to the 27606 # vt220 entry -TD 27607 # 27608 # 2021-07-24 27609 # + trim "flash" from pccon+base -TD 27610 # + revert change for aaa+rv -TD 27611 # + add workaround for Windows Terminal's problems with CR/LF mapping to 27612 # ms-terminal (patch by Juergen Pfeifer). 27613 # + review/update current Windows Terminal vs ms-terminal -TD 27614 # 27615 # 2021-07-31 27616 # + add extensions in xterm+tmux and ecma+strikeout to ms-terminal, 27617 # but cancel the non-working Cr and Ms capabilities -TD 27618 # + add foot and foot-direct -TD 27619 # 27620 # 2021-08-15 27621 # + fix missing "%d" for setaf/setab code 8-15 in xterm+direct16 (report 27622 # by Florian Weimer) -TD 27623 # 27624 # 2021-08-16 27625 # + corrected tsl capability for terminator -TD 27626 # 27627 # 2021-09-04 27628 # + modify linux3.0 entry to reflect default mapping of shift-tab by 27629 # kbd 1.14 (report by Jan Engelhardt) -TD 27630 # 27631 # 2021-09-11 27632 # + add testing note for xterm-{hp|sco|sun} -TD 27633 # + corrected description for ansi.sys-old -TD 27634 # + add xterm+nopcfkeys, to fill in keys for xterm-hp, xterm-sun -TD 27635 # + use hp+arrows in a few places -TD 27636 # + use hp+pfk-cr in a few places -TD 27637 # 27638 # 2021-09-21 27639 # + add kbeg to xterm+keypad to accommodate termcap applications -TD 27640 # + add smglp and smgrp to vt420+lrmm, to provide useful data for the 27641 # "tabs" +m option -TD 27642 # 27643 # 2021-10-09 27644 # + fill in some details for infoton -TD 27645 # + fix spelling/consistency in several descriptions -TD 27646 # + use vt420+lrmm in vt420 -TD 27647 # 27648 # 2021-10-13 27649 # + trim some redundant definitions -TD 27650 # 27651 # 2021-11-13 27652 # + add xterm+sl-alt, use that in foot+base (report by Jonas Grosse 27653 # Sundrup) -TD 27654 # 27655 # 2021-11-20 27656 # + add dim, ecma+strikeout to st-0.6 -TD 27657 # 27658 # 2021-11-27 27659 # + fix errata in description fields (report by Eric Lindblad) -TD 27660 # + add x10term+sl, aixterm+sl, ncr260vp+sl, ncr260vp+vt, wyse+sl -TD 27661 # 27662 # 2022-01-23 27663 # + update kitty -TD 27664 # 27665 # 2022-03-12 27666 # + add xterm+acs building-block -TD 27667 # + add xterm-p370, for use in older terminals -TD 27668 # + add dec+sl to xterm-new, per patch #371 -TD 27669 # + add mosh and mosh-256color -TD 27670 # 27671 # 2022-03-19 27672 # + add xgterm -TD 27673 # + correct setal in mintty/tmux entries, add to vte-2018 (report by 27674 # Robert Lange) 27675 # + add blink to vte-2018 (report by Robert Lange) 27676 # 27677 # 2022-03-26 27678 # + update teken -TD 27679 # + add teken-16color, teken-vt and teken-sc -TD 27680 # + add a few missing details for vte-2018 (report by Robert Lange) -TD 27681 # 27682 # 2022-03-27 27683 # + make description-fields distinct -TD 27684 # 27685 # 2022-04-30 27686 # + modify samples for xterm mouse 1002/1003 modes to use 1006 mode, and 27687 # also provide for focus in/out responses -TD 27688 # 27689 # 2022-05-28 27690 # + expanded notes for teken/syscons -TD 27691 # 27692 # 2022-06-04 27693 # + remove u6-u9 from teken-2018 -TD 27694 # + set "xterm-new" to "xterm-p370", add "xterm-p371" -TD 27695 # 27696 # 2022-06-18 27697 # + revise kon/kon2/jfbterm to undo "linux2.6" change to 27698 # smacs/rmacs/enacs (Debian #1012800) -TD 27699 # + amended note for att610+cvis0, as per documentation for att610, 27700 # att620, att730 -TD 27701 # 27702 # 2022-06-25 27703 # + correct dsl in dec+sl (report by Rajeev Pillai) -TD 27704 # + add/use ansi+cpr, decid+cpr -TD 27705 # 27706 # 2022-07-03 27707 # + use NQ to flag entries where the terminal does not support query and 27708 # response -TD 27709 # + use ansi+enq and decid+cpr in cases where the terminal probably 27710 # supported the u6-u9 extension -TD 27711 # + add/use apollo+vt132, xterm+alt47 -TD 27712 # 27713 # 2022-08-27 27714 # + modify nsterm to use xterm+alt1049 (report by Paul Handly) -TD 27715 # + modify putty to use xterm+alt1049 -TD 27716 # 27717 # 2022-12-24 27718 # + add/use bracketed+paste to help identify terminals supporting this 27719 # xterm feature (prompted by discussion with Bram Moolenaar) -TD 27720 # 27721 # 2022-12-29 27722 # + correct PS vs PE names in bracketed+paste (report by Bram Moolenaar) 27723 # -TD 27724 # 27725 # 2023-01-07 27726 # + add comment to bracketed+paste explaining that vim patch 9.0.1117 is 27727 # needed for use with the updated xterm descriptions (suggested by Bram 27728 # Moolenaar). 27729 # + add RV report+version (suggested by Bram Moolenaar). 27730 # 27731 # 2023-01-14 27732 # + change RV to XR/xr, to avoid conflict with pre-existing usage in vim, 27733 # to use RV/rv to denote DA2 and its response (discussion with Bram 27734 # Moolenaar) -TD 27735 # + add XF flag to xterm+focus so that termcap applications can be aware 27736 # of terminals which may support focus in/out -TD 27737 # + use xterm+focus in xterm-p370 and tmux -TD 27738 # 27739 # 2023-01-28 27740 # + document XF, kxIN and kxOUT -TD 27741 # + add note on sun/wscons/cmdtool/shelltool -TD 27742 # 27743 # 2023-04-01 27744 # + remove DECCOLM+DECSCLM from foot (patch by Daniel Ekloef). 27745 # 27746 # 2023-04-08 27747 # + add xterm+focus to alacritty+common (patch by Christian Duerr). 27748 # 27749 # 2023-05-08 27750 # + add mode 1004 to xterm+sm+1006 from xterm #380 -TD 27751 # 27752 # 2023-06-05 27753 # + add xterm+focus to foot+base (patch by Daniel Ekloef). 27754 # 27755 # 2023-07-08 27756 # + add linux+kbs for terminals which imitate xterm's behavior with 27757 # Linux -TD 27758 # 27759 # 2023-07-15 27760 # + mention E3 in regard to user_caps(5) -TD 27761 # 27762 # 2023-08-12 27763 # + add/use putty+cursor to reflect amending of modified cursor-keys in 27764 # 2021 -TD 27765 # + add ecma+strikeout to putty -TD 27766 # 27767 # 2023-10-21 27768 # + use oldxterm+sm+1006 in vte-2014 (report by Benno Schulenberg) -TD 27769 # + add ansi+apparrows -TD 27770 # 27771 # 2023-10-28 27772 # + move xterm focus mode 1004 from xterm+sm+1006 into xterm+focus as 27773 # fe/fd capabilities, like vim (vim-pr #13440). 27774 # 27775 # 2023-11-11 27776 # + used "infocmp -u" to help trim redundant capabilities -TD 27777 # 27778 # 2023-12-09 27779 # + remove xterm+sm+1006 from tmux (Debian #1057688). 27780 # + used "infocmp -u" to help trim redundant capabilities -TD 27781 # 27782 ######## SHANTIH! SHANTIH! SHANTIH! 27783