BUILDING revision 1.144
1 BUILDING(8) System Manager's Manual BUILDING(8) 2 3 NAME 4 BUILDING - Procedure for building NetBSD from source code. 5 6 REQUIREMENTS 7 NetBSD is designed to be buildable on most POSIX-compliant host systems. 8 The basic build procedure is the same whether compiling natively (on the 9 same NetBSD architecture) or cross compiling (on another architecture or 10 OS). 11 12 This source tree contains a special subtree, "tools", which uses the host 13 system to create a build toolchain for the target architecture. The host 14 system must have at least C and C++ compilers in order to create the 15 toolchain (make is not required); all other tools are created as part of 16 the NetBSD build process. (See the environment variables section below 17 if you need to override or manually select your compilers.) 18 19 FILES 20 Source tree layout 21 doc/BUILDING.mdoc 22 This document (in -mdoc troff format; the original copy). 23 24 BUILDING This document (in plaintext). 25 26 tools/compat/README 27 Special notes for cross-hosting a NetBSD build on non- 28 NetBSD platforms. 29 30 Makefile The main Makefile for NetBSD; should only be run for 31 native builds with an appropriately up-to-date version of 32 NetBSD make(1). Intended for expert use with knowledge of 33 its shortcomings, it has been superseded by the build.sh 34 shell script as the recommended means for building NetBSD. 35 36 UPDATING Special notes for updating from an earlier revision of 37 NetBSD. It is important to read this file before every 38 build of an updated source tree. 39 40 build.sh Bourne-compatible shell script used for building the host 41 build tools and the NetBSD system from scratch. Can be 42 used for both native and cross builds, and should be used 43 instead of make(1) as it performs additional checks to 44 prevent common issues going undetected, such as building 45 with an outdated version of make(1). 46 47 crypto/dist/, dist/, gnu/dist/ 48 Sources imported verbatim from third parties, without 49 mangling the existing build structure. Other source trees 50 in bin through usr.sbin use the NetBSD make(1) "reachover" 51 Makefile semantics when building these programs for a 52 native host. 53 54 external, sys/external 55 Sources and build infrastructure for components imported 56 (mostly) unchanged from upstream maintainers, sorted by 57 applicable license. This is (slowly) replacing the 58 crypto/dist, dist, and gnu/dist directories. 59 60 distrib/, etc/ 61 Sources for items used when making a full release 62 snapshot, such as files installed in DESTDIR/etc on the 63 destination system, boot media, and release notes. 64 65 tests/, regress/ 66 Regression test harness. Can be cross-compiled, but only 67 run natively. tests/ uses the atf(7) test framework; 68 regress/ contains older tests that have not yet been 69 migrated to atf(7). 70 71 sys/ NetBSD kernel sources. 72 73 tools/ "Reachover" build structure for the host build tools. 74 This has a special method of determining out-of-date 75 status. 76 77 bin/ ... usr.sbin/ 78 Sources to the NetBSD userland (non-kernel) programs. If 79 any of these directories are missing, they will be skipped 80 during the build. 81 82 external/mit/xorg/ 83 "Reachover" build structure for modular Xorg; the source 84 is in X11SRCDIR. 85 86 Build tree layout 87 The NetBSD build tree is described in hier(7), and the release layout is 88 described in release(7). 89 90 CONFIGURATION 91 Environment variables 92 Several environment variables control the behaviour of NetBSD builds. 93 94 HOST_SH Path name to a shell available on the host system and 95 suitable for use during the build. The NetBSD build 96 system requires a modern Bourne-like shell with POSIX- 97 compliant features, and also requires support for the 98 "local" keyword to declare local variables in shell 99 functions (which is a widely-implemented but non- 100 standardised feature). 101 102 Depending on the host system, a suitable shell may be 103 /bin/sh, /usr/xpg4/bin/sh, /bin/ksh (provided it is a 104 variant of ksh that supports the "local" keyword, such 105 as ksh88, but not ksh93), or /usr/local/bin/bash. 106 107 Most parts of the build require HOST_SH to be an 108 absolute path; however, build.sh allows it to be a 109 simple command name, which will be converted to an 110 absolute path by searching the PATH. 111 112 HOST_CC Path name to C compiler used to create the toolchain. 113 114 HOST_CFLAGS Flags passed to the host C compiler. 115 116 HOST_CXX Path name to C++ compiler used to create the toolchain. 117 118 HOST_CXXFLAGS Flags passed to the host C++ compiler. 119 120 MACHINE Machine type, e.g., "macppc". 121 122 MACHINE_ARCH Machine architecture, e.g., "powerpc". 123 124 MAKE Path name to invoke make(1) as. 125 126 MAKEFLAGS Flags to invoke make(1) with. Note that build.sh 127 ignores the value of MAKEFLAGS passed in the 128 environment, but allows MAKEFLAGS to be set via the -V 129 option. 130 131 MAKEOBJDIR Directory to use as the .OBJDIR for the current 132 directory. The value is subjected to variable 133 expansion by make(1). Typical usage is to set this 134 variable to a value involving the use of 135 `${.CURDIR:S...}' or `${.CURDIR:C...}', to derive the 136 value of .OBJDIR from the value of .CURDIR. Used only 137 if MAKEOBJDIRPREFIX is not defined. MAKEOBJDIR can be 138 provided only in the environment or via the -O flag of 139 build.sh; it cannot usefully be set inside a Makefile, 140 including mk.conf or ${MAKECONF}. 141 142 MAKEOBJDIRPREFIX Top level directory of the object directory tree. The 143 value is subjected to variable expansion by make(1). 144 build.sh will create the ${MAKEOBJDIRPREFIX} directory 145 if necessary, but if make(1) is used without build.sh, 146 then rules in <bsd.obj.mk> will abort the build if the 147 ${MAKEOBJDIRPREFIX} directory does not exist. If the 148 value is defined and valid, then 149 ${MAKEOBJDIRPREFIX}/${.CURDIR} is used as the .OBJDIR 150 for the current directory. The current directory may 151 be read only. MAKEOBJDIRPREFIX can be provided only in 152 the environment or via the -M flag of build.sh; it 153 cannot usefully be set inside a Makefile, including 154 mk.conf or ${MAKECONF}. 155 156 INSTALLBOOT_UBOOT_PATHS 157 A colon-separated list of search paths used by 158 installboot to find U-Boot packages; see 159 installboot(8). If appropriate U-Boot packages 160 are installed, bootable images are created as 161 part of a release. 162 163 "make" variables 164 Several variables control the behavior of NetBSD builds. Unless 165 otherwise specified, these variables may be set in either the process 166 environment or the make(1) configuration file specified by MAKECONF. 167 168 BUILDID Identifier for the build. If set, this should be a short 169 string that is suitable for use as part of a file or 170 directory name. The identifier will be appended to object 171 directory names, and can be consulted in the make(1) 172 configuration file in order to set additional build 173 parameters, such as compiler flags. It will also be used as 174 part of the kernel version string, which can be printed by 175 "uname -v". 176 177 Default: Unset. 178 179 BUILDINFO This may be a multi-line string containing information about 180 the build. This will appear in DESTDIR/etc/release, and it 181 will be stored in the buildinfo variable in any kernels that 182 are built. When such kernels are booted, the sysctl(7) 183 kern.buildinfo variable will report this value. The string 184 may contain backslash escape sequences, such as "\\" 185 (representing a backslash character) and "\n" (representing a 186 newline). 187 188 Default: Unset. 189 190 BUILDSEED GCC uses random numbers when compiling C++ code. This 191 variable seeds the gcc random number generator using the 192 -frandom-seed flag with this value. By default, it is set to 193 NetBSD-(majorversion). Using a fixed value causes C++ 194 binaries to be the same when built from the same sources, 195 resulting in identical (reproducible) builds. Additional 196 information is available in the GCC documentation of 197 -frandom-seed. 198 199 CPUFLAGS Additional flags to the compiler/assembler to select CPU 200 instruction set options, CPU tuning options, etc. 201 202 Default: Unset. 203 204 DESTDIR Directory to contain the built NetBSD system. If set, 205 special options are passed to the compilation tools to 206 prevent their default use of the host system's /usr/include, 207 /usr/lib, and so forth. This pathname must be an absolute 208 path, and should not end with a slash (/) character. (For 209 installation into the system's root directory, set DESTDIR to 210 an empty string, not to "/"). The directory must reside on a 211 file system which supports long file names and hard links. 212 213 Default: Empty string if USETOOLS is "yes"; unset otherwise. 214 215 Note: build.sh will provide a default of destdir.MACHINE (in 216 the top-level .OBJDIR) unless run in `expert' mode. 217 218 MAKECONF The name of the make(1) configuration file. Only settable in 219 the process environment. 220 221 Default: "/etc/mk.conf" 222 223 MAKEVERBOSE 224 Level of verbosity of status messages. Supported values: 225 226 0 No descriptive messages or commands executed by make(1) 227 are shown. 228 229 1 Brief messages are shown describing what is being done, 230 but the actual commands executed by make(1) are not 231 displayed. 232 233 2 Descriptive messages are shown as above (prefixed with a 234 `#'), and ordinary commands performed by make(1) are 235 displayed. 236 237 3 In addition to the above, all commands performed by 238 make(1) are displayed, even if they would ordinarily 239 have been hidden through use of the "@" prefix in the 240 relevant makefile. 241 242 4 In addition to the above, commands executed by make(1) 243 are traced through use of the sh(1) "-x" flag. 244 245 Default: 2 246 247 MKCATPAGES Can be set to "yes" or "no". Indicates whether preformatted 248 plaintext manual pages will be created during a build. 249 250 Default: "no" 251 252 MKCROSSGDB Can be set to "yes" or "no". Create a cross-gdb as a host 253 tool. 254 255 Default: "no" 256 257 MKDEBUG Can be set to "yes" or "no". Indicates whether debug 258 information should be generated for all userland binaries 259 compiled. The result is collected as an additional debug.tgz 260 and xdebug.tgz set and installed in /usr/libdata/debug. 261 262 Default: "no" 263 264 MKDEBUGLIB Can be set to "yes" or "no". Indicates whether debug 265 information (see MKDEBUG) should also be generated for all 266 libraries built. 267 268 Default: "no" 269 270 MKDOC Can be set to "yes" or "no". Indicates whether system 271 documentation destined for DESTDIR/usr/share/doc will be 272 installed during a build. 273 274 Default: "yes" 275 276 MKHTML Can be set to "yes" or "no". Indicates whether preformatted 277 HTML manual pages will be built and installed 278 279 Default: "yes" 280 281 MKHOSTOBJ Can be set to "yes" or "no". If set to "yes", then for 282 programs intended to be run on the compile host, the name, 283 release, and architecture of the host operating system will 284 be suffixed to the name of the object directory created by 285 "make obj". (This allows multiple host systems to compile 286 NetBSD for a single target.) If set to "no", then programs 287 built to be run on the compile host will use the same object 288 directory names as programs built to be run on the target. 289 290 Default: "no" 291 292 MKINFO Can be set to "yes" or "no". Indicates whether GNU Info 293 files will be created and installed during a build. GNU Info 294 files are used for providing documentation by most of the 295 compilation tools. 296 297 Default: "yes" 298 299 MKKDEBUG Can be set to "yes" or "no". Force generation of full-debug 300 symbol versions of all kernels compiled. Alongside of the 301 netbsd kernel file, an unstripped version netbsd.gdb is 302 created. This is useful if a cross-gdb is built as well (see 303 MKCROSSGDB). 304 305 Default: "no" 306 307 MKKMOD Can be set to "yes" or "no". Indicates whether kernel 308 modules are built and installed. 309 310 Default: "yes" 311 312 MKLINT Can be set to "yes" or "no". Indicates whether lint(1) will 313 be run against portions of the NetBSD source code during the 314 build, and whether lint libraries will be installed into 315 DESTDIR/usr/libdata/lint. 316 317 Default: "yes" 318 319 MKMAN Can be set to "yes" or "no". Indicates whether manual pages 320 will be installed during a build. 321 322 Default: "yes" 323 324 MKNLS Can be set to "yes" or "no". Indicates whether Native 325 Language System locale zone files will be compiled and 326 installed during a build. 327 328 Default: "yes" 329 330 MKOBJ Can be set to "yes" or "no". Indicates whether object 331 directories will be created when running "make obj". If set 332 to "no", then all built files will be located inside the 333 regular source tree. 334 335 Default: "yes" 336 337 Note that setting MKOBJ to "no" is not recommended and may 338 cause problems when updating the tree with cvs(1). 339 340 MKPIC Can be set to "yes" or "no". Indicates whether shared 341 objects and libraries will be created and installed during a 342 build. If set to "no", the entire built system will be 343 statically linked. 344 345 Default: Platform dependent. As of this writing, all 346 platforms except m68000 default to "yes". 347 348 MKPICINSTALL 349 Can be set to "yes" or "no". Indicates whether the ar(1) 350 format libraries (lib*_pic.a), used to generate shared 351 libraries, are installed during a build. 352 353 Default: "yes" 354 355 MKPROFILE Can be set to "yes" or "no". Indicates whether profiled 356 libraries (lib*_p.a) will be built and installed during a 357 build. 358 359 Default: "yes"; however, some platforms turn off MKPROFILE by 360 default at times due to toolchain problems with profiled 361 code. 362 363 MKREPRO Can be set to "yes" or "no". Create reproducible builds. 364 This enables different switches to make two builds from the 365 same source tree result in the same build results. 366 367 Default: "no" This may be set to "yes" by giving build.sh the 368 -P option. 369 370 MKREPRO_TIMESTAMP 371 Unix timestamp. When MKREPRO is set, the timestamp of all 372 files in the sets will be set to this value. 373 374 Default: Unset. This may be set automatically to the latest 375 source tree timestamp using cvslatest(1) by giving build.sh 376 the -P option. 377 378 MKSHARE Can be set to "yes" or "no". Indicates whether files 379 destined to reside in DESTDIR/usr/share will be built and 380 installed during a build. If set to "no", then all of 381 MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to 382 "no" unconditionally. 383 384 Default: "yes" 385 386 MKSTRIPIDENT 387 Can be set to "yes" or "no". Indicates whether RCS IDs, for 388 use with ident(1), should be stripped from program binaries 389 and shared libraries. 390 391 Default: "no" 392 393 MKSTRIPSYM Can be set to "yes" or "no". Indicates whether all local 394 symbols should be stripped from shared libraries. If "yes", 395 strip all local symbols from shared libraries; the affect is 396 equivalent to the -x option of ld(1). If "no", strip only 397 temporary local symbols; the affect is equivalent to the -X 398 option of ld(1). Keeping non-temporary local symbols such as 399 static function names is useful on using DTrace for userland 400 libraries and getting a backtrace from a rump kernel loading 401 shared libraries. 402 403 Default: "yes" 404 405 MKUNPRIVED Can be set to "yes" or "no". Indicates whether an 406 unprivileged install will occur. The user, group, 407 permissions, and file flags, will not be set on the installed 408 items; instead the information will be appended to a file 409 called METALOG in DESTDIR. The contents of METALOG are used 410 during the generation of the distribution tar files to ensure 411 that the appropriate file ownership is stored. 412 413 Default: "no" 414 415 MKUPDATE Can be set to "yes" or "no". Indicates whether all install 416 operations intended to write to DESTDIR will compare file 417 timestamps before installing, and skip the install phase if 418 the destination files are up-to-date. This also has 419 implications on full builds (see next subsection). 420 421 Default: "no" 422 423 MKX11 Can be set to "yes" or "no". Indicates whether X11 is built 424 from X11SRCDIR. 425 426 Default: "no" 427 428 TOOLDIR Directory to hold the host tools, once built. If specified, 429 must be an absolute path. This directory should be unique to 430 a given host system and NetBSD source tree. (However, 431 multiple targets may share the same TOOLDIR; the target- 432 dependent files have unique names.) If unset, a default 433 based on the uname(1) information of the host platform will 434 be created in the .OBJDIR of src. 435 436 Default: Unset. 437 438 USETOOLS Indicates whether the tools specified by TOOLDIR should be 439 used as part of a build in progress. Must be set to "yes" if 440 cross-compiling. 441 442 yes Use the tools from TOOLDIR. 443 444 no Do not use the tools from TOOLDIR, but refuse to build 445 native compilation tool components that are version- 446 specific for that tool. 447 448 never Do not use the tools from TOOLDIR, even when building 449 native tool components. This is similar to the 450 traditional NetBSD build method, but does not verify 451 that the compilation tools in use are up-to-date 452 enough in order to build the tree successfully. This 453 may cause build or runtime problems when building the 454 whole NetBSD source tree. 455 456 Default: "yes", unless TOOLCHAIN_MISSING is set to "yes". 457 458 USETOOLS is also set to "no" when using <bsd.*.mk> outside 459 the NetBSD source tree. 460 461 X11SRCDIR Directory containing the modular Xorg source. If specified, 462 must be an absolute path. The main modular Xorg source is 463 found in X11SRCDIR/external/mit. 464 465 Default: NETBSDSRCDIR/../xsrc, if that exists; otherwise 466 /usr/xsrc. 467 468 "make" variables for full builds 469 These variables only affect the top level "Makefile" and do not affect 470 manually building subtrees of the NetBSD source code. 471 472 INSTALLWORLDDIR Location for the "make installworld" target to install 473 to. If specified, must be an absolute path. 474 475 Default: "/" 476 477 MKOBJDIRS Can be set to "yes" or "no". Indicates whether object 478 directories will be created automatically (via a "make 479 obj" pass) at the start of a build. 480 481 Default: "no" 482 483 If using build.sh, the default is "yes". This may be 484 set back to "no" by giving build.sh the -o option. 485 486 MKUPDATE Can be set to "yes" or "no". If set, then in addition 487 to the effects described for MKUPDATE=yes above, this 488 implies the effects of NOCLEANDIR (i.e., "make cleandir" 489 is avoided). 490 491 Default: "no" 492 493 If using build.sh, this may be set by giving the -u 494 option. 495 496 NBUILDJOBS Now obsolete. Use the make(1) option -j, instead. See 497 below. 498 499 Default: Unset. 500 501 NOCLEANDIR If set, avoids the "make cleandir" phase of a full 502 build. This has the effect of allowing only changed 503 files in a source tree to be recompiled. This can speed 504 up builds when updating only a few files in the tree. 505 506 Default: Unset. 507 508 See also MKUPDATE. 509 510 NODISTRIBDIRS If set, avoids the "make distrib-dirs" phase of a full 511 build. This skips running mtree(8) on DESTDIR, useful 512 on systems where building as an unprivileged user, or 513 where it is known that the system-wide mtree files have 514 not changed. 515 516 Default: Unset. 517 518 NOINCLUDES If set, avoids the "make includes" phase of a full 519 build. This has the effect of preventing make(1) from 520 thinking that some programs are out-of-date simply 521 because the system include files have changed. However, 522 this option should not be used when updating the entire 523 NetBSD source tree arbitrarily; it is suggested to use 524 MKUPDATE=yes instead in that case. 525 526 Default: Unset. 527 528 RELEASEDIR If set, specifies the directory to which a release(7) 529 layout will be written at the end of a "make release". 530 If specified, must be an absolute path. 531 532 Default: Unset. 533 534 Note: build.sh will provide a default of releasedir (in 535 the top-level .OBJDIR) unless run in `expert' mode. 536 537 BUILDING 538 "make" command line options 539 This is not a summary of all the options available to make(1); only the 540 options used most frequently with NetBSD builds are listed here. 541 542 -j njob Run up to njob make(1) subjobs in parallel. Makefiles should 543 use .WAIT or have explicit dependencies as necessary to 544 enforce build ordering. 545 546 -m dir Specify the default directory for searching for system 547 Makefile segments, mainly the <bsd.*.mk> files. When building 548 any full NetBSD source tree, this should be set to the 549 "share/mk" directory in the source tree. This is set 550 automatically when building from the top level, or when using 551 build.sh. 552 553 -n Display the commands that would have been executed, but do not 554 actually execute them. This will still cause recursion to 555 take place. 556 557 -V var Print make(1)'s idea of the value of var. Does not build any 558 targets. 559 560 var=value Set the variable var to value, overriding any setting 561 specified by the process environment, the MAKECONF 562 configuration file, or the system Makefile segments. 563 564 "make" targets 565 These default targets may be built by running make(1) in any subtree of 566 the NetBSD source code. It is recommended that none of these be used 567 from the top level Makefile; as a specific exception, "make obj" and 568 "make cleandir" are useful in that context. 569 570 all Build programs, libraries, and preformatted documentation. 571 572 clean Remove program and library object code files. 573 574 cleandir Same as clean, but also remove preformatted documentation, 575 dependency files generated by "make depend", and any other 576 files known to be created at build time. 577 578 depend Create dependency files (.depend) containing more detailed 579 information about the dependencies of source code on header 580 files. Allows programs to be recompiled automatically when a 581 dependency changes. 582 583 dependall Does a "make depend" immediately followed by a "make all". 584 This improves cache locality of the build since both passes 585 read the source files in their entirety. 586 587 distclean Synonym for cleandir. 588 589 includes Build and install system header files. Typically needed 590 before any system libraries or programs can be built. 591 592 install Install programs, libraries, and documentation into DESTDIR. 593 Few files will be installed to DESTDIR/dev, DESTDIR/etc, 594 DESTDIR/root or DESTDIR/var in order to prevent user supplied 595 configuration data from being overwritten. 596 597 lint Run lint(1) against the C source code, where appropriate, and 598 generate system-installed lint libraries. 599 600 obj Create object directories to be used for built files, instead 601 of building directly in the source tree. 602 603 tags Create ctags(1) searchable function lists usable by the ex(1) 604 and vi(1) text editors. 605 606 "make" targets for the top level 607 Additional make(1) targets are usable specifically from the top source 608 level to facilitate building the entire NetBSD source tree. 609 610 build Build the entire NetBSD system (except the kernel). This 611 orders portions of the source tree such that prerequisites 612 will be built in the proper order. 613 614 distribution Do a "make build", and then install a full distribution 615 (which does not include a kernel) into DESTDIR, including 616 files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and 617 DESTDIR/var. 618 619 buildworld As per "make distribution", except that it ensures that 620 DESTDIR is not the root directory. 621 622 installworld Install the distribution from DESTDIR to INSTALLWORLDDIR, 623 which defaults to the root directory. Ensures that 624 INSTALLWORLDDIR is not the root directory if cross 625 compiling. 626 627 The INSTALLSETS environment variable may be set to a space- 628 separated list of distribution sets to be installed. By 629 default, all sets except "etc" and "xetc" are installed, so 630 most files in INSTALLWORLDDIR/etc will not be installed or 631 modified. 632 633 Note: Before performing this operation with 634 INSTALLWORLDDIR=/, it is highly recommended that you 635 upgrade your kernel and reboot. After performing this 636 operation, it is recommended that you use etcupdate(8) to 637 update files in INSTALLWORLDDIR/etc, and postinstall(8) to 638 check for or fix inconsistencies. 639 640 sets Create distribution sets from DESTDIR into 641 RELEASEDIR/RELEASEMACHINEDIR/binary/sets. Should be run 642 after "make distribution", as "make build" alone does not 643 install all of the required files. 644 645 sourcesets Create source sets of the source tree into 646 RELEASEDIR/source/sets. 647 648 syspkgs Create syspkgs from DESTDIR into 649 RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs. Should be run 650 after "make distribution", as "make build" alone does not 651 install all of the required files. 652 653 release Do a "make distribution", build kernels, distribution 654 media, and install sets (this as per "make sets"), and then 655 package the system into a standard release layout as 656 described by release(7). This requires that RELEASEDIR be 657 set (see above). 658 659 iso-image Create a NetBSD installation CD-ROM image in the 660 RELEASEDIR/images directory. The CD-ROM file system will 661 have a layout as described in release(7). 662 663 For most machine types, the CD-ROM will be bootable, and 664 will automatically run the sysinst(8) menu-based 665 installation program, which can be used to install or 666 upgrade a NetBSD system. Bootable CD-ROMs also contain 667 tools that may be useful in repairing a damaged NetBSD 668 installation. 669 670 Before "make iso-image" is attempted, RELEASEDIR must be 671 populated by "make release" or equivalent. 672 673 Note that other, smaller, CD-ROM images may be created in 674 the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom 675 directory by "make release". These smaller images usually 676 contain the same tools as the larger images in 677 RELEASEDIR/images, but do not contain additional content 678 such as the distribution sets. 679 680 Note that the mac68k port still uses an older method of 681 creating CD-ROM images. This requires the mkisofs(1) 682 utility, which is not part of NetBSD, but which can be 683 installed from pkgsrc/sysutils/cdrtools. 684 685 iso-image-source 686 Create a NetBSD installation CD-ROM image in the 687 RELEASEDIR/images directory. The CD-ROM file system will 688 have a layout as described in release(7). It will have top 689 level directories for the machine type and source. 690 691 For most machine types, the CD-ROM will be bootable, and 692 will automatically run the sysinst(8) menu-based 693 installation program, which can be used to install or 694 upgrade a NetBSD system. Bootable CD-ROMs also contain 695 tools that may be useful in repairing a damaged NetBSD 696 installation. 697 698 Before "make iso-image-source" is attempted, RELEASEDIR 699 must be populated by "make sourcesets release" or 700 equivalent. 701 702 Note that other, smaller, CD-ROM images may be created in 703 the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom 704 directory by "make release". These smaller images usually 705 contain the same tools as the larger images in 706 RELEASEDIR/images, but do not contain additional content 707 such as the distribution sets. 708 709 Note that the mac68k port still uses an older method of 710 creating CD-ROM images. This requires the mkisofs(1) 711 utility, which is not part of NetBSD, but which can be 712 installed from pkgsrc/sysutils/cdrtools. 713 714 install-image 715 Create a bootable NetBSD installation disk image in the 716 RELEASEDIR/images directory. The installation disk image 717 is suitable for copying to bootable USB flash memory 718 sticks, etc., for machines which are able to boot from such 719 devices. The file system in the bootable disk image will 720 have a layout as described in release(7). 721 722 The installation image is bootable, and will automatically 723 run the sysinst(8) menu-based installation program, which 724 can be used to install or upgrade a NetBSD system. The 725 image also contains tools that may be useful in repairing a 726 damaged NetBSD installation. 727 728 Before "make install-image" is attempted, RELEASEDIR must 729 be populated by "make release" or equivalent. The build 730 must have been performed with MKUNPRIVED=yes because "make 731 install-image" relies on information in DESTDIR/METALOG. 732 733 live-image Create NetBSD live images in the RELEASEDIR/images 734 directory. The live image contains all necessary files to 735 boot NetBSD up to multi-user mode, including all files 736 which should be extracted during installation, NetBSD 737 disklabel, bootloaders, etc. 738 739 The live image is suitable for use as a disk image in 740 virtual machine environments such as QEMU, and also useful 741 to boot NetBSD from a USB flash memory stick on a real 742 machine, without the need for installation. 743 744 Before "make live-image" is attempted, RELEASEDIR must be 745 populated by "make release" or equivalent. The build must 746 have been performed with MKUNPRIVED=yes because "make 747 install-image" relies on information in DESTDIR/METALOG. 748 749 regression-tests 750 Can only be run after building the regression tests in the 751 directory "regress". Runs those compiled regression tests 752 on the local host. Note that most tests are now managed 753 instead using atf(7); this target should probably run those 754 as well but currently does not. 755 756 The "build.sh" script 757 This script file is a shell script designed to build the entire NetBSD 758 system on any host with a suitable modern shell and some common 759 utilities. The required shell features are described under the HOST_SH 760 variable. 761 762 If a host system's default shell does support the required features, then 763 we suggest that you explicitly specify a suitable shell using a command 764 like 765 766 /path/to/suitable/shell build.sh [options] 767 768 The above command will usually enable build.sh to automatically set 769 HOST_SH=/path/to/suitable/shell, but if that fails, then the following 770 set of commands may be used instead: 771 772 HOST_SH=/path/to/suitable/shell 773 export HOST_SH 774 ${HOST_SH} build.sh [options] 775 776 If build.sh detects that it is being executed under an unsuitable shell, 777 it attempts to exec a suitable shell instead, or prints an error message. 778 If HOST_SH is not set explicitly, then build.sh sets a default using 779 heuristics dependent on the host platform, or from the shell under which 780 build.sh is executed (if that can be determined), or using the first copy 781 of sh found in PATH. 782 783 All cross-compile builds, and most native builds, of the entire system 784 should make use of build.sh rather than just running "make". This way, 785 the make(1) program will be bootstrapped properly, in case the host 786 system has an older or incompatible "make" program. 787 788 When compiling the entire system via build.sh, many make(1) variables are 789 set for you in order to help encapsulate the build process. In the list 790 of options below, variables that are automatically set by build.sh are 791 noted where applicable. 792 793 The following operations are supported by build.sh: 794 795 build Build the system as per "make build". Before the main part 796 of the build commences, this command runs the obj operation 797 (unless the -o option is given), "make cleandir" (unless 798 the -u option is given), and the tools operation. 799 800 distribution Build a full distribution as per "make distribution". This 801 command first runs the build operation. 802 803 release Build a full release as per "make release". This command 804 first runs the distribution operation. 805 806 makewrapper Create the nbmake-MACHINE wrapper. This operation is 807 automatically performed for any of the other operations. 808 809 cleandir Perform "make cleandir". 810 811 obj Perform "make obj". 812 813 tools Build and install the host tools from src/tools. This 814 command will first run "make obj" and "make cleandir" in 815 the tools subdirectory unless the -o or -u options 816 (respectively) are given. 817 818 install=idir Install the contents of DESTDIR to idir, using "make 819 installworld". Note that files that are part of the "etc" 820 or "xetc" sets will not be installed, unless overridden by 821 the INSTALLSETS environment variable. 822 823 kernel=kconf Build a new kernel. The kconf argument is the name of a 824 configuration file suitable for use by config(1). If kconf 825 does not contain any `/' characters, the configuration file 826 is expected to be found in the KERNCONFDIR directory, which 827 is typically sys/arch/MACHINE/conf. The new kernel will be 828 built in a subdirectory of KERNOBJDIR, which is typically 829 sys/arch/MACHINE/compile or an associated object directory. 830 831 This command does not imply the tools command; run the 832 tools command first unless it is certain that the tools 833 already exist and are up to date. 834 835 This command will run "make cleandir" on the kernel in 836 question first unless the -u option is given. 837 838 kernel.gdb=kconf 839 Build a new kernel with debug information. Similar to the 840 above kernel=kconf operation, but creates a netbsd.gdb file 841 alongside of the kernel netbsd, which contains a full 842 symbol table and can be used for debugging (for example 843 with a cross-gdb built by MKCROSSGDB). 844 845 kernels This command will build all kernels defined in port 846 specific release build procedure. 847 848 This command internally calls the kernel=kconf operation 849 for each found kernel configuration file. 850 851 modules This command will build kernel modules and install them 852 into DESTDIR. 853 854 releasekernel=kconf 855 Install a gzip(1)ed copy of the kernel previously built by 856 kernel=kconf into 857 RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as 858 netbsd-kconf.gz, although the "netbsd" prefix is determined 859 from the "config" directives in kconf. 860 861 sets Perform "make sets". 862 863 sourcesets Perform "make sourcesets". 864 865 syspkgs Perform "make syspkgs". 866 867 iso-image Perform "make iso-image". 868 869 iso-image-source 870 Perform "make iso-image-source". 871 872 install-image 873 Perform "make install-image". 874 875 live-image Perform "make live-image". 876 877 list-arch Prints a list of valid MACHINE and MACHINE_ARCH settings, 878 the default MACHINE_ARCH for each MACHINE, and aliases for 879 MACHINE/MACHINE_ARCH pairs, and then exits. The -m or -a 880 options (or both) may be used to specify glob patterns that 881 will be used to narrow the list of results; for example, 882 "build.sh -m 'evb*' -a '*arm*' list-arch" will list all 883 known MACHINE/MACHINE_ARCH values in which either MACHINE 884 or ALIAS matches the pattern `evb*', and MACHINE_ARCH 885 matches the pattern `*arm*'. 886 887 The following command line options alter the behaviour of the build.sh 888 operations described above: 889 890 -a arch Set the value of MACHINE_ARCH to arch. See the -m option for 891 more information. 892 893 -B buildid 894 Set the value of BUILDID to buildid. This will also append the 895 build identifier to the name of the "make" wrapper script so 896 that the resulting name is of the form 897 "nbmake-MACHINE-BUILDID". 898 899 -C cdextras 900 Append cdextras to the CDEXTRA variable, which is a space- 901 separated list of files or directories that will be added to 902 the CD-ROM image that may be create by the "iso-image" or 903 "iso-image-source" operations. Files will be added to the root 904 of the CD-ROM image, whereas directories will be copied 905 recursively. If relative paths are specified, they will be 906 converted to absolute paths before being used. Multiple paths 907 may be specified via multiple -C options, or via a single 908 option whose argument contains multiple space-separated paths. 909 910 -c compiler 911 Select the compiler for the toolchain to build NetBSD and for 912 inclusion in the NetBSD distribution. Supported choices: 913 914 clang 915 916 gcc [default] 917 918 The compiler used to build the toolchain can be different; see 919 HOST_CC and HOST_CXX. 920 921 -D dest Set the value of DESTDIR to dest. If a relative path is 922 specified, it will be converted to an absolute path before 923 being used. 924 925 -E Set `expert' mode. This overrides various sanity checks, and 926 allows: DESTDIR does not have to be set to a non-root path for 927 builds, and MKUNPRIVED=yes does not have to be set when 928 building as a non-root user. 929 930 Note: It is highly recommended that you know what you are doing 931 when you use this option. 932 933 -h Print a help message. 934 935 -j njob Run up to njob make(1) subjobs in parallel; passed through to 936 make(1). If you see failures for reasons other than running 937 out of memory while using build.sh with -j, please save 938 complete build logs so the failures can be analyzed. 939 940 To achieve the fastest builds, -j values between (1 + the 941 number of CPUs) and (2 * the number of CPUs) are recommended. 942 Use lower values on machines with limited memory or I/O 943 bandwidth. 944 945 -M obj Set MAKEOBJDIRPREFIX to obj. Unsets MAKEOBJDIR. See "-O obj" 946 for more information. 947 948 For instance, if the source directory is /usr/src, a setting of 949 "-M /usr/obj" will place build-time files under 950 /usr/obj/usr/src/bin, /usr/obj/usr/src/lib, 951 /usr/obj/usr/src/usr.bin, and so forth. 952 953 If a relative path is specified, it will be converted to an 954 absolute path before being used. build.sh imposes the 955 restriction that the argument to the -M option must not begin 956 with a "$" (dollar sign) character; otherwise it would be too 957 difficult to determine whether the value is an absolute or a 958 relative path. If the directory does not already exist, 959 build.sh will create it. 960 961 -m mach Set the value of MACHINE to mach, unless the mach argument is 962 an alias that refers to a MACHINE/MACHINE_ARCH pair, in which 963 case both MACHINE and MACHINE_ARCH are set from the alias. 964 Such aliases are interpreted entirely by build.sh; they are not 965 used by any other part of the build system. The MACHINE_ARCH 966 setting implied by mach will override any value of MACHINE_ARCH 967 in the process environment, but will not override a value set 968 by the -a option. All cross builds require -m, but if unset on 969 a NetBSD host, the host's value of MACHINE will be detected and 970 used automatically. 971 972 See the list-arch operation for a way to get a list of valid 973 MACHINE and MACHINE_ARCH settings. 974 975 -N noiselevel 976 Set the "noisyness" level of the build, by setting MAKEVERBOSE 977 to noiselevel. 978 979 -n Show the commands that would be executed by build.sh, but do 980 not make any changes. This is similar in concept to "make -n". 981 982 -O obj Create an appropriate transform macro for MAKEOBJDIR that will 983 place the built object files under obj. Unsets 984 MAKEOBJDIRPREFIX. 985 986 For instance, a setting of "-O /usr/obj" will place build-time 987 files under /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin, and 988 so forth. 989 990 If a relative path is specified, it will be converted to an 991 absolute path before being used. build.sh imposes the 992 restriction that the argument to the -O option must not contain 993 a "$" (dollar sign) character. If the directory does not 994 already exist, build.sh will create it. 995 996 In normal use, exactly one of the -M or -O options should be 997 specified. If neither -M nor -O is specified, then a default 998 object directory will be chosen according to rules in 999 <bsd.obj.mk>. Relying on this default is not recommended 1000 because it is determined by complex rules that are influenced 1001 by the values of several variables and by the location of the 1002 source directory. 1003 1004 Note that placing the obj directory location outside of the 1005 default source tree hierarchy makes it easier to manually clear 1006 out old files in the event the "make cleandir" operation is 1007 unable to do so. (See CAVEATS below.) 1008 1009 Note also that use of one of -M or -O is the only means of 1010 building multiple machine architecture userlands from the same 1011 source tree without cleaning between builds (in which case, one 1012 would specify distinct obj locations for each). 1013 1014 -o Set the value of MKOBJDIRS to "no". Otherwise, it will be 1015 automatically set to "yes". This default is opposite to the 1016 behaviour when not using build.sh. 1017 1018 -R rel Set the value of RELEASEDIR to rel. If a relative path is 1019 specified, it will be converted to an absolute path before 1020 being used. 1021 1022 -r Remove the contents of DESTDIR and TOOLDIR before building 1023 (provides a clean starting point). This will skip deleting 1024 DESTDIR if building on a native system to the root directory. 1025 1026 -S seed Change the value of BUILDSEED to seed. This should rarely be 1027 necessary. 1028 1029 -T tools Set the value of TOOLDIR to tools. If a relative path is 1030 specified, it will be converted to an absolute path before 1031 being used. If set, the bootstrap "make" will only be rebuilt 1032 if the source files for make(1) have changed. 1033 1034 -U Set MKUNPRIVED=yes. 1035 1036 -u Set MKUPDATE=yes. 1037 1038 -V var=[value] 1039 Set the environment variable var to an optional value. This is 1040 propagated to the nbmake wrapper. 1041 1042 -w wrapper 1043 Create the nbmake wrapper script (see below) in a custom 1044 location, specified by wrapper. This allows, for instance, to 1045 place the wrapper in PATH automatically. Note that wrapper is 1046 the full name of the file, not just a directory name. If a 1047 relative path is specified, it will be converted to an absolute 1048 path before being used. 1049 1050 -X x11src 1051 Set the value of X11SRCDIR to x11src. If a relative path is 1052 specified, it will be converted to an absolute path before 1053 being used. 1054 1055 -x Set MKX11=yes. 1056 1057 -Z var Unset ("zap") the environment variable var. This is propagated 1058 to the nbmake wrapper. 1059 1060 The "nbmake-MACHINE" wrapper script 1061 If using the build.sh script to build NetBSD, a nbmake-MACHINE script 1062 will be created in TOOLDIR/bin upon the first build to assist in building 1063 subtrees on a cross-compile host. 1064 1065 nbmake-MACHINE can be invoked in lieu of make(1), and will instead call 1066 the up-to-date version of "nbmake" installed into TOOLDIR/bin with 1067 several key variables pre-set, including MACHINE, MACHINE_ARCH, and 1068 TOOLDIR. nbmake-MACHINE will also set variables specified with -V, and 1069 unset variables specified with -Z. 1070 1071 This script can be symlinked into a directory listed in PATH, or called 1072 with an absolute path. 1073 1074 EXAMPLES 1075 1. % ./build.sh [options] tools kernel=GENERIC 1076 1077 Build a new toolchain, and use the new toolchain to configure and 1078 build a new GENERIC kernel. 1079 1080 2. % ./build.sh [options] -U distribution 1081 1082 Using unprivileged mode, build a complete distribution to a DESTDIR 1083 directory that build.sh selects (and will display). 1084 1085 3. # ./build.sh [options] -U install=/ 1086 1087 As root, install to / the distribution that was built by example 2. 1088 Even though this is run as root, -U is required so that the 1089 permissions stored in DESTDIR/METALOG are correctly applied to the 1090 files as they're copied to /. 1091 1092 4. % ./build.sh [options] -U -u release 1093 1094 Using unprivileged mode, build a complete release to DESTDIR and 1095 RELEASEDIR directories that build.sh selects (and will display). 1096 MKUPDATE=yes (-u) is set to prevent the "make cleandir", so that if 1097 this is run after example 2, it doesn't need to redo that portion of 1098 the release build. 1099 1100 OBSOLETE VARIABLES 1101 NBUILDJOBS Use the make(1) option -j instead. 1102 1103 USE_NEW_TOOLCHAIN 1104 The new toolchain is now the default. To disable, use 1105 TOOLCHAIN_MISSING=yes. 1106 1107 SEE ALSO 1108 make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8), 1109 pkgsrc/sysutils/cdrtools 1110 1111 HISTORY 1112 The build.sh based build scheme was introduced for NetBSD 1.6 as 1113 USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that. 1114 1115 CAVEATS 1116 After significant updates to third-party components in the source tree, 1117 the "make cleandir" operation may be insufficient to clean out old files 1118 in object directories. Instead, one may have to manually remove the 1119 files. Consult the UPDATING file for notices concerning this. 1120 1121 NetBSD October 13, 2020 NetBSD 1122
Indexes created Fri Oct 10 14:10:03 GMT 2025