Makefile revision 1.291.2.2
1 # $NetBSD: Makefile,v 1.291.2.2 2012/08/15 17:36:46 sborrill Exp $ 2 3 # 4 # This is the top-level makefile for building NetBSD. For an outline of 5 # how to build a snapshot or release, as well as other release engineering 6 # information, see http://www.NetBSD.org/developers/releng/index.html 7 # 8 # Not everything you can set or do is documented in this makefile. In 9 # particular, you should review the files in /usr/share/mk (especially 10 # bsd.README) for general information on building programs and writing 11 # Makefiles within this structure, and see the comments in src/etc/Makefile 12 # for further information on installation and release set options. 13 # 14 # Variables listed below can be set on the make command line (highest 15 # priority), in /etc/mk.conf (middle priority), or in the environment 16 # (lowest priority). 17 # 18 # Variables: 19 # DESTDIR is the target directory for installation of the compiled 20 # software. It defaults to /. Note that programs are built against 21 # libraries installed in DESTDIR. 22 # MKMAN, if `no', will prevent building of manual pages. 23 # MKOBJDIRS, if not `no', will build object directories at 24 # an appropriate point in a build. 25 # MKSHARE, if `no', will prevent building and installing 26 # anything in /usr/share. 27 # MKUPDATE, if not `no', will avoid a `make cleandir' at the start of 28 # `make build', as well as having the effects listed in 29 # /usr/share/mk/bsd.README. 30 # NOCLEANDIR, if defined, will avoid a `make cleandir' at the start 31 # of the `make build'. 32 # NOINCLUDES will avoid the `make includes' usually done by `make build'. 33 # 34 # See mk.conf(5) for more details. 35 # 36 # 37 # Targets: 38 # build: 39 # Builds a full release of NetBSD in DESTDIR, except for the 40 # /etc configuration files. 41 # If BUILD_DONE is set, this is an empty target. 42 # distribution: 43 # Builds a full release of NetBSD in DESTDIR, including the /etc 44 # configuration files. 45 # buildworld: 46 # As per `make distribution', except that it ensures that DESTDIR 47 # is not the root directory. 48 # installworld: 49 # Install the distribution from DESTDIR to INSTALLWORLDDIR (which 50 # defaults to the root directory). Ensures that INSTALLWORLDDIR 51 # is not the root directory if cross compiling. 52 # release: 53 # Does a `make distribution', and then tars up the DESTDIR files 54 # into ${RELEASEDIR}/${RELEASEMACHINEDIR}, in release(7) format. 55 # (See etc/Makefile for more information on this.) 56 # regression-tests: 57 # Runs the regression tests in "regress" on this host. 58 # sets: 59 # Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets 60 # from ${DESTDIR} 61 # sourcesets: 62 # Populate ${RELEASEDIR}/source/sets from ${NETBSDSRCDIR} 63 # syspkgs: 64 # Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs 65 # from ${DESTDIR} 66 # iso-image: 67 # Create CD-ROM image in RELEASEDIR/iso. 68 # RELEASEDIR must already have been populated by `make release' 69 # or equivalent. 70 # iso-image-source: 71 # Create CD-ROM image with source in RELEASEDIR/iso. 72 # RELEASEDIR must already have been populated by 73 # `make release sourcesets' or equivalent. 74 # live-image: 75 # Create bootable live image for emulators or USB stick etc. 76 # in RELEASEDIR/liveimage. 77 # RELEASEDIR must already have been populated by `make release' 78 # or equivalent. 79 # install-image: 80 # Create bootable installation image for USB stick etc. 81 # in RELEASEDIR/installimage. 82 # RELEASEDIR must already have been populated by `make release' 83 # or equivalent. 84 # 85 # Targets invoked by `make build,' in order: 86 # cleandir: cleans the tree. 87 # do-top-obj: creates the top level object directory. 88 # do-tools-obj: creates object directories for the host toolchain. 89 # do-tools: builds host toolchain. 90 # obj: creates object directories. 91 # do-distrib-dirs: creates the distribution directories. 92 # includes: installs include files. 93 # do-tools-compat: builds the "libnbcompat" library; needed for some 94 # random host tool programs in the source tree. 95 # do-lib-csu: builds and installs prerequisites from lib/csu. 96 # do-libgcc: builds and installs prerequisites from 97 # gnu/lib/crtstuff${LIBGCC_EXT} (if necessary) and 98 # gnu/lib/libgcc${LIBGCC_EXT}. 99 # do-libpcc: builds and install prerequisites from 100 # external/bsd/pcc/crtstuff (if necessary) and 101 # external/bsd/pcc/libpcc. 102 # do-lib-libc: builds and installs prerequisites from lib/libc. 103 # do-lib: builds and installs prerequisites from lib. 104 # do-sys-rump-dev-lib: builds and installs prerequisites from sys/rump/dev/lib 105 # do-sys-rump-fs-lib: builds and installs prerequisites from sys/rump/fs/lib 106 # do-sys-rump-kern-lib: builds and installs prereq. from sys/rump/kern/lib 107 # do-sys-rump-net-lib: builds and installs prerequisites from sys/rump/net/lib 108 # do-sys-modules: builds and installs kernel modules (used by rump binaries) 109 # do-ld.so: builds and installs prerequisites from libexec/ld.*_so. 110 # do-compat-lib-csu: builds and installs prerequisites from compat/lib/csu 111 # if ${MKCOMPAT} != "no". 112 # do-compat-libgcc: builds and installs prerequisites from 113 # compat/gnu/lib/crtstuff${LIBGCC_EXT} (if necessary) and 114 # compat/gnu/lib/libgcc${LIBGCC_EXT} if ${MKCOMPAT} != "no". 115 # do-compat-lib-libc: builds and installs prerequisites from compat/lib/libc 116 # if ${MKCOMPAT} != "no". 117 # do-build: builds and installs the entire system. 118 # do-x11: builds and installs X11 if ${MKX11} != "no"; either 119 # X11R7 from src/external/mit/xorg if ${X11FLAVOUR} == "Xorg" 120 # or X11R6 from src/x11 121 # do-extsrc: builds and installs extsrc if ${MKEXTSRC} != "no". 122 # do-obsolete: installs the obsolete sets (for the postinstall-* targets). 123 # 124 125 .if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == "" 126 .MAKEFLAGS: -m ${.CURDIR}/share/mk 127 .endif 128 129 # 130 # If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may 131 # not be the top level objdir, because "make obj" can happen in the *middle* 132 # of "make build" (long after <bsd.own.mk> is calculated it). So, pre-set 133 # _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}. 134 # 135 _SRC_TOP_OBJ_= 136 137 .include <bsd.own.mk> 138 139 # 140 # Sanity check: make sure that "make build" is not invoked simultaneously 141 # with a standard recursive target. 142 # 143 144 .if make(build) || make(release) || make(snapshot) 145 .for targ in ${TARGETS:Nobj:Ncleandir} 146 .if make(${targ}) && !target(.BEGIN) 147 .BEGIN: 148 @echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.' 149 @false 150 .endif 151 .endfor 152 .endif 153 154 # 155 # _SUBDIR is used to set SUBDIR, after removing directories that have 156 # BUILD_${dir}=no, or that have no ${dir}/Makefile. 157 # 158 _SUBDIR= tools lib include gnu external crypto/external bin games 159 _SUBDIR+= libexec sbin usr.bin 160 _SUBDIR+= usr.sbin share rescue sys etc tests compat .WAIT distrib regress 161 162 .for dir in ${_SUBDIR} 163 .if "${dir}" == ".WAIT" \ 164 || (${BUILD_${dir}:Uyes} != "no" && exists(${dir}/Makefile)) 165 SUBDIR+= ${dir} 166 .endif 167 .endfor 168 169 .if exists(regress) 170 regression-tests: .PHONY .MAKE 171 @echo Running regression tests... 172 ${MAKEDIRTARGET} regress regress 173 .endif 174 175 .if ${MKUNPRIVED} != "no" 176 NOPOSTINSTALL= # defined 177 .endif 178 179 afterinstall: .PHONY .MAKE 180 .if ${MKMAN} != "no" 181 ${MAKEDIRTARGET} share/man makedb 182 .endif 183 .if (${MKUNPRIVED} != "no" && ${MKINFO} != "no") 184 ${MAKEDIRTARGET} gnu/usr.bin/texinfo/install-info infodir-meta 185 .endif 186 .if !defined(NOPOSTINSTALL) 187 ${MAKEDIRTARGET} . postinstall-check 188 .endif 189 190 _POSTINSTALL= ${.CURDIR}/usr.sbin/postinstall/postinstall 191 _POSTINSTALL_ENV= \ 192 AWK=${TOOL_AWK:Q} \ 193 DB=${TOOL_DB:Q} \ 194 HOST_SH=${HOST_SH:Q} \ 195 MAKE=${MAKE:Q} \ 196 PWD_MKDB=${TOOL_PWD_MKDB:Q} \ 197 STAT=${TOOL_STAT:Q} 198 199 postinstall-check: .PHONY 200 @echo " === Post installation checks ===" 201 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ check; if [ $$? -gt 1 ]; then exit 1; fi 202 @echo " ================================" 203 204 postinstall-fix: .NOTMAIN .PHONY 205 @echo " === Post installation fixes ===" 206 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix 207 @echo " ===============================" 208 209 postinstall-fix-obsolete: .NOTMAIN .PHONY 210 @echo " === Removing obsolete files ===" 211 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix obsolete 212 @echo " ===============================" 213 214 215 # 216 # Targets (in order!) called by "make build". 217 # 218 .if defined(HAVE_GCC) 219 .if ${HAVE_GCC} == "4" 220 LIBGCC_EXT=4 221 BUILD_CC_LIB_BASEDIR= gnu/lib 222 BUILD_CC_LIB_BASETARGET= gnu-lib 223 .else 224 LIBGCC_EXT= 225 BUILD_CC_LIB_BASEDIR= external/gpl3/gcc/lib 226 BUILD_CC_LIB_BASETARGET= external-gpl3-gcc-lib 227 .endif 228 .endif 229 230 BUILDTARGETS+= check-tools 231 .if ${MKUPDATE} == "no" && !defined(NOCLEANDIR) 232 BUILDTARGETS+= cleandir 233 .endif 234 .if ${MKOBJDIRS} != "no" 235 BUILDTARGETS+= do-top-obj 236 .endif 237 .if ${USETOOLS} == "yes" # { 238 .if ${MKOBJDIRS} != "no" 239 BUILDTARGETS+= do-tools-obj 240 .endif 241 BUILDTARGETS+= do-tools 242 .endif # USETOOLS # } 243 .if ${MKOBJDIRS} != "no" 244 BUILDTARGETS+= obj 245 .endif 246 BUILDTARGETS+= clean_METALOG 247 .if !defined(NODISTRIBDIRS) 248 BUILDTARGETS+= do-distrib-dirs 249 .endif 250 .if !defined(NOINCLUDES) 251 BUILDTARGETS+= includes 252 .endif 253 BUILDTARGETS+= do-tools-compat 254 BUILDTARGETS+= do-lib-csu 255 .if ${MKGCC} != "no" 256 BUILDTARGETS+= do-libgcc 257 .endif 258 .if ${MKPCC} != "no" 259 BUILDTARGET+= do-libpcc 260 .endif 261 BUILDTARGETS+= do-lib-libc 262 BUILDTARGETS+= do-lib 263 .if ${MKKMOD} != "no" 264 BUILDTARGETS+= do-sys-modules 265 .endif 266 BUILDTARGETS+= do-sys-rump-dev-lib do-sys-rump-fs-lib 267 BUILDTARGETS+= do-sys-rump-kern-lib do-sys-rump-net-lib 268 .if ${MKCOMPAT} != "no" 269 BUILDTARGETS+= do-compat-lib-csu 270 BUILDTARGETS+= do-compat-libgcc 271 BUILDTARGETS+= do-compat-lib-libc 272 .endif 273 BUILDTARGETS+= do-ld.so 274 BUILDTARGETS+= do-build 275 .if ${MKX11} != "no" 276 BUILDTARGETS+= do-x11 277 .endif 278 .if ${MKEXTSRC} != "no" 279 BUILDTARGETS+= do-extsrc 280 .endif 281 BUILDTARGETS+= do-obsolete 282 283 # 284 # Enforce proper ordering of some rules. 285 # 286 287 .ORDER: ${BUILDTARGETS} 288 includes-lib: .PHONY includes-include includes-sys 289 includes-gnu: .PHONY includes-lib 290 291 # 292 # Build the system and install into DESTDIR. 293 # 294 295 START_TIME!= date 296 297 build: .PHONY .MAKE 298 .if defined(BUILD_DONE) 299 @echo "Build already installed into ${DESTDIR}" 300 .else 301 @echo "Build started at: ${START_TIME}" 302 .for tgt in ${BUILDTARGETS} 303 ${MAKEDIRTARGET} . ${tgt} 304 .endfor 305 ${MAKEDIRTARGET} etc install-etc-release 306 @echo "Build started at: ${START_TIME}" 307 @printf "Build finished at: " && date 308 .endif 309 310 # 311 # Build a full distribution, but not a release (i.e. no sets into 312 # ${RELEASEDIR}). "buildworld" enforces a build to ${DESTDIR} != / 313 # 314 315 distribution buildworld: .PHONY .MAKE 316 .if make(buildworld) && \ 317 (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/") 318 @echo "Won't make ${.TARGET} with DESTDIR=/" 319 @false 320 .endif 321 ${MAKEDIRTARGET} . build NOPOSTINSTALL=1 322 ${MAKEDIRTARGET} etc distribution INSTALL_DONE=1 323 .if defined(DESTDIR) && ${DESTDIR} != "" && ${DESTDIR} != "/" 324 ${MAKEDIRTARGET} . postinstall-fix-obsolete 325 ${MAKEDIRTARGET} distrib/sets checkflist 326 .endif 327 @echo "make ${.TARGET} started at: ${START_TIME}" 328 @printf "make ${.TARGET} finished at: " && date 329 330 # 331 # Install the distribution from $DESTDIR to $INSTALLWORLDDIR (defaults to `/') 332 # If installing to /, ensures that the host's operating system is NetBSD and 333 # the host's `uname -m` == ${MACHINE}. 334 # 335 336 HOST_UNAME_S!= uname -s 337 HOST_UNAME_M!= uname -m 338 339 installworld: .PHONY .MAKE 340 .if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/") 341 @echo "Can't make ${.TARGET} to DESTDIR=/" 342 @false 343 .endif 344 .if !defined(INSTALLWORLDDIR) || \ 345 ${INSTALLWORLDDIR} == "" || ${INSTALLWORLDDIR} == "/" 346 .if (${HOST_UNAME_S} != "NetBSD") 347 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLWORLDDIR=/" 348 @false 349 .endif 350 .if (${HOST_UNAME_M} != ${MACHINE}) 351 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLWORLDDIR=/" 352 @false 353 .endif 354 .endif 355 ${MAKEDIRTARGET} distrib/sets installsets \ 356 INSTALLDIR=${INSTALLWORLDDIR:U/} INSTALLSETS=${INSTALLSETS:Q} 357 ${MAKEDIRTARGET} . postinstall-check DESTDIR=${INSTALLWORLDDIR} 358 @echo "make ${.TARGET} started at: ${START_TIME}" 359 @printf "make ${.TARGET} finished at: " && date 360 361 # 362 # Install modules from $DESTDIR to $INSTALLMODULESDIR 363 # 364 installmodules: .PHONY .MAKE 365 .if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/") 366 @echo "Can't make ${.TARGET} to DESTDIR=/" 367 @false 368 .endif 369 .if !defined(INSTALLMODULESDIR) || \ 370 ${INSTALLMODULESDIR} == "" || ${INSTALLMODULESDIR} == "/" 371 .if (${HOST_UNAME_S} != "NetBSD") 372 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLMODULESDIR=/" 373 @false 374 .endif 375 .if (${HOST_UNAME_M} != ${MACHINE}) 376 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLMODULESDIR=/" 377 @false 378 .endif 379 .endif 380 ${MAKEDIRTARGET} sys/modules install DESTDIR=${INSTALLMODULESDIR:U/} 381 @echo "make ${.TARGET} started at: ${START_TIME}" 382 @printf "make ${.TARGET} finished at: " && date 383 384 # 385 # Create sets from $DESTDIR or $NETBSDSRCDIR into $RELEASEDIR 386 # 387 388 .for tgt in sets sourcesets syspkgs 389 ${tgt}: .PHONY .MAKE 390 ${MAKEDIRTARGET} distrib/sets ${tgt} 391 .endfor 392 393 # 394 # Build a release or snapshot (implies "make distribution"). Note that 395 # in this case, the set lists will be checked before the tar files 396 # are made. 397 # 398 399 release snapshot: .PHONY .MAKE 400 ${MAKEDIRTARGET} . distribution 401 ${MAKEDIRTARGET} etc release DISTRIBUTION_DONE=1 402 @echo "make ${.TARGET} started at: ${START_TIME}" 403 @printf "make ${.TARGET} finished at: " && date 404 405 # 406 # Create a CD-ROM image. 407 # 408 409 iso-image: .PHONY 410 ${MAKEDIRTARGET} distrib iso_image 411 ${MAKEDIRTARGET} etc iso-image 412 @echo "make ${.TARGET} started at: ${START_TIME}" 413 @printf "make ${.TARGET} finished at: " && date 414 415 iso-image-source: .PHONY 416 ${MAKEDIRTARGET} distrib iso_image CDSOURCE=true 417 ${MAKEDIRTARGET} etc iso-image 418 @echo "make ${.TARGET} started at: ${START_TIME}" 419 @printf "make ${.TARGET} finished at: " && date 420 421 # 422 # Create bootable live images. 423 # 424 425 live-image: .PHONY 426 ${MAKEDIRTARGET} etc live-image 427 @echo "make ${.TARGET} started at: ${START_TIME}" 428 @printf "make ${.TARGET} finished at: " && date 429 430 # 431 # Create bootable installation images. 432 # 433 434 install-image: .PHONY 435 ${MAKEDIRTARGET} etc install-image 436 @echo "make ${.TARGET} started at: ${START_TIME}" 437 @printf "make ${.TARGET} finished at: " && date 438 439 # 440 # Special components of the "make build" process. 441 # 442 443 check-tools: .PHONY 444 .if ${TOOLCHAIN_MISSING} != "no" && !defined(EXTERNAL_TOOLCHAIN) 445 @echo '*** WARNING: Building on MACHINE=${MACHINE} with missing toolchain.' 446 @echo '*** May result in a failed build or corrupt binaries!' 447 .elif defined(EXTERNAL_TOOLCHAIN) 448 @echo '*** Using external toolchain rooted at ${EXTERNAL_TOOLCHAIN}.' 449 .endif 450 .if defined(NBUILDJOBS) 451 @echo '*** WARNING: NBUILDJOBS is obsolete; use -j directly instead!' 452 .endif 453 454 # Delete or sanitise a leftover METALOG from a previous build. 455 clean_METALOG: .PHONY .MAKE 456 .if ${MKUPDATE} != "no" 457 ${MAKEDIRTARGET} distrib/sets clean_METALOG 458 .endif 459 460 do-distrib-dirs: .PHONY .MAKE 461 .if !defined(DESTDIR) || ${DESTDIR} == "" 462 ${MAKEDIRTARGET} etc distrib-dirs DESTDIR=/ 463 .else 464 ${MAKEDIRTARGET} etc distrib-dirs DESTDIR=${DESTDIR} 465 .endif 466 467 .for targ in cleandir obj includes 468 do-${targ}: .PHONY ${targ} 469 @true 470 .endfor 471 472 .if defined(HAVE_GCC) 473 .if ${USE_COMPILERCRTSTUFF} == "yes" 474 BUILD_CC_LIB= ${BUILD_CC_LIB_BASEDIR}/crtstuff${LIBGCC_EXT} 475 .endif 476 BUILD_CC_LIB+= ${BUILD_CC_LIB_BASEDIR}/libgcc${LIBGCC_EXT} 477 .elif defined(HAVE_PCC) 478 BUILD_CC_LIB+= external/bsd/pcc/crtstuff 479 BUILD_CC_LIB+= external/bsd/pcc/libpcc 480 .endif 481 482 .for dir in tools tools/compat lib/csu ${BUILD_CC_LIB} lib/libc lib sys/rump/dev/lib sys/rump/fs/lib sys/rump/kern/lib sys/rump/net/lib sys/modules 483 do-${dir:S/\//-/g}: .PHONY .MAKE 484 .for targ in dependall install 485 ${MAKEDIRTARGET} ${dir} ${targ} 486 .endfor 487 .endfor 488 489 .if ${MKCOMPAT} != "no" 490 COMPAT_SUBDIR_LIST=lib/csu ${BUILD_CC_LIB} lib/libc 491 .for dir in ${COMPAT_SUBDIR_LIST} 492 do-compat-${dir:S/\//-/g}: .PHONY .MAKE 493 .for targ in dependall install 494 ${MAKEDIRTARGET} compat ${targ} BOOTSTRAP_SUBDIRS="../../../${dir}" 495 .endfor 496 .endfor 497 .endif 498 499 do-top-obj: .PHONY .MAKE 500 ${MAKEDIRTARGET} . obj NOSUBDIR= 501 502 do-tools-obj: .PHONY .MAKE 503 ${MAKEDIRTARGET} tools obj 504 505 do-libgcc: .PHONY .MAKE 506 .if defined(HAVE_GCC) 507 .if ${MKGCC} != "no" 508 .if ${USE_COMPILERCRTSTUFF} == "yes" 509 ${MAKEDIRTARGET} . do-${BUILD_CC_LIB_BASETARGET}-crtstuff${LIBGCC_EXT} 510 .endif 511 ${MAKEDIRTARGET} . do-${BUILD_CC_LIB_BASETARGET}-libgcc${LIBGCC_EXT} 512 .endif 513 .endif 514 515 do-compat-libgcc: .PHONY .MAKE 516 .if defined(HAVE_GCC) 517 .if ${MKGCC} != "no" 518 .if ${USE_COMPILERCRTSTUFF} == "yes" 519 ${MAKEDIRTARGET} . do-compat-${BUILD_CC_LIB_BASETARGET}-crtstuff${LIBGCC_EXT} 520 .endif 521 ${MAKEDIRTARGET} . do-compat-${BUILD_CC_LIB_BASETARGET}-libgcc${LIBGCC_EXT} 522 .endif 523 .endif 524 525 do-libpcc: .PHONY .MAKE 526 .if defined(HAVE_PCC) 527 .if ${MKPCC} != "no" 528 .if ${USE_COMPILERCRTSTUFF} == "yes" 529 ${MAKEDIRTARGET} . do-pcc-lib-crtstuff 530 .endif 531 ${MAKEDIRTARGET} . do-pcc-lib-libpcc 532 .endif 533 .endif 534 535 do-ld.so: .PHONY .MAKE 536 .for targ in dependall install 537 ${MAKEDIRTARGET} libexec/ld.elf_so ${targ} 538 .endfor 539 540 do-build: .PHONY .MAKE 541 .for targ in dependall install 542 ${MAKEDIRTARGET} . ${targ} BUILD_tools=no BUILD_lib=no 543 .endfor 544 545 do-x11: .PHONY .MAKE 546 .if ${MKX11} != "no" 547 .if ${X11FLAVOUR} == "Xorg" 548 ${MAKEDIRTARGET} external/mit/xorg build 549 .else 550 ${MAKEDIRTARGET} x11 build 551 .endif 552 .else 553 @echo "MKX11 is not enabled" 554 @false 555 .endif 556 557 do-extsrc: .PHONY .MAKE 558 .if ${MKEXTSRC} != "no" 559 ${MAKEDIRTARGET} extsrc build 560 .else 561 @echo "MKEXTSRC is not enabled" 562 @false 563 .endif 564 565 do-obsolete: .PHONY .MAKE 566 ${MAKEDIRTARGET} etc install-obsolete-lists 567 568 # 569 # Speedup stubs for some subtrees that don't need to run these rules. 570 # (Tells <bsd.subdir.mk> not to recurse for them.) 571 # 572 573 .for dir in bin etc distrib games libexec regress sbin usr.bin usr.sbin tools 574 includes-${dir}: .PHONY 575 @true 576 .endfor 577 .for dir in etc distrib regress 578 install-${dir}: .PHONY 579 @true 580 .endfor 581 582 # 583 # XXX this needs to change when distrib Makefiles are recursion compliant 584 # XXX many distrib subdirs need "cd etc && make snap_pre snap_kern" first... 585 # 586 dependall-distrib depend-distrib all-distrib: .PHONY 587 @true 588 589 .include <bsd.sys.mk> 590 .include <bsd.obj.mk> 591 .include <bsd.kernobj.mk> 592 .include <bsd.subdir.mk> 593 594 # 595 # Display current make(1) parameters 596 # 597 params: .PHONY .MAKE 598 ${MAKEDIRTARGET} etc params 599
Indexes created Thu Oct 23 22:10:10 GMT 2025