Makefile revision 1.297 1 # $NetBSD: Makefile,v 1.297 2012/08/14 13:12:15 apb Exp $
2
3 #
4 # This is the top-level makefile for building NetBSD. For an outline of
5 # how to build a snapshot or release, as well as other release engineering
6 # information, see http://www.NetBSD.org/developers/releng/index.html
7 #
8 # Not everything you can set or do is documented in this makefile. In
9 # particular, you should review the files in /usr/share/mk (especially
10 # bsd.README) for general information on building programs and writing
11 # Makefiles within this structure, and see the comments in src/etc/Makefile
12 # for further information on installation and release set options.
13 #
14 # Variables listed below can be set on the make command line (highest
15 # priority), in /etc/mk.conf (middle priority), or in the environment
16 # (lowest priority).
17 #
18 # Variables:
19 # DESTDIR is the target directory for installation of the compiled
20 # software. It defaults to /. Note that programs are built against
21 # libraries installed in DESTDIR.
22 # MKMAN, if `no', will prevent building of manual pages.
23 # MKOBJDIRS, if not `no', will build object directories at
24 # an appropriate point in a build.
25 # MKSHARE, if `no', will prevent building and installing
26 # anything in /usr/share.
27 # MKUPDATE, if not `no', will avoid a `make cleandir' at the start of
28 # `make build', as well as having the effects listed in
29 # /usr/share/mk/bsd.README.
30 # NOCLEANDIR, if defined, will avoid a `make cleandir' at the start
31 # of the `make build'.
32 # NOINCLUDES will avoid the `make includes' usually done by `make build'.
33 #
34 # See mk.conf(5) for more details.
35 #
36 #
37 # Targets:
38 # build:
39 # Builds a full release of NetBSD in DESTDIR, except for the
40 # /etc configuration files.
41 # If BUILD_DONE is set, this is an empty target.
42 # distribution:
43 # Builds a full release of NetBSD in DESTDIR, including the /etc
44 # configuration files.
45 # buildworld:
46 # As per `make distribution', except that it ensures that DESTDIR
47 # is not the root directory.
48 # installworld:
49 # Install the distribution from DESTDIR to INSTALLWORLDDIR (which
50 # defaults to the root directory). Ensures that INSTALLWORLDDIR
51 # is not the root directory if cross compiling.
52 # release:
53 # Does a `make distribution', and then tars up the DESTDIR files
54 # into ${RELEASEDIR}/${RELEASEMACHINEDIR}, in release(7) format.
55 # (See etc/Makefile for more information on this.)
56 # regression-tests:
57 # Runs the regression tests in "regress" on this host.
58 # sets:
59 # Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/sets
60 # from ${DESTDIR}
61 # sourcesets:
62 # Populate ${RELEASEDIR}/source/sets from ${NETBSDSRCDIR}
63 # syspkgs:
64 # Populate ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/syspkgs
65 # from ${DESTDIR}
66 # iso-image:
67 # Create CD-ROM image in RELEASEDIR/iso.
68 # RELEASEDIR must already have been populated by `make release'
69 # or equivalent.
70 # iso-image-source:
71 # Create CD-ROM image with source in RELEASEDIR/iso.
72 # RELEASEDIR must already have been populated by
73 # `make release sourcesets' or equivalent.
74 # live-image:
75 # Create bootable live image for emulators or USB stick etc.
76 # in RELEASEDIR/liveimage.
77 # RELEASEDIR must already have been populated by `make release'
78 # or equivalent.
79 # install-image:
80 # Create bootable installation image for USB stick etc.
81 # in RELEASEDIR/installimage.
82 # RELEASEDIR must already have been populated by `make release'
83 # or equivalent.
84 #
85 # Targets invoked by `make build,' in order:
86 # cleandir: cleans the tree.
87 # do-top-obj: creates the top level object directory.
88 # do-tools-obj: creates object directories for the host toolchain.
89 # do-tools: builds host toolchain.
90 # obj: creates object directories.
91 # do-distrib-dirs: creates the distribution directories.
92 # includes: installs include files.
93 # do-tools-compat: builds the "libnbcompat" library; needed for some
94 # random host tool programs in the source tree.
95 # do-lib-csu: builds and installs prerequisites from lib/csu.
96 # do-libgcc: builds and installs prerequisites from
97 # gnu/lib/crtstuff${LIBGCC_EXT} (if necessary) and
98 # gnu/lib/libgcc${LIBGCC_EXT}.
99 # do-libpcc: builds and install prerequisites from
100 # external/bsd/pcc/crtstuff (if necessary) and
101 # external/bsd/pcc/libpcc.
102 # do-lib-libc: builds and installs prerequisites from lib/libc.
103 # do-lib: builds and installs prerequisites from lib.
104 # do-sys-rump-dev-lib: builds and installs prerequisites from sys/rump/dev/lib
105 # do-sys-rump-fs-lib: builds and installs prerequisites from sys/rump/fs/lib
106 # do-sys-rump-kern-lib: builds and installs prereq. from sys/rump/kern/lib
107 # do-sys-rump-net-lib: builds and installs prerequisites from sys/rump/net/lib
108 # do-sys-modules: builds and installs kernel modules (used by rump binaries)
109 # do-ld.so: builds and installs prerequisites from libexec/ld.*_so.
110 # do-compat-lib-csu: builds and installs prerequisites from compat/lib/csu
111 # if ${MKCOMPAT} != "no".
112 # do-compat-libgcc: builds and installs prerequisites from
113 # compat/gnu/lib/crtstuff${LIBGCC_EXT} (if necessary) and
114 # compat/gnu/lib/libgcc${LIBGCC_EXT} if ${MKCOMPAT} != "no".
115 # do-compat-lib-libc: builds and installs prerequisites from compat/lib/libc
116 # if ${MKCOMPAT} != "no".
117 # do-build: builds and installs the entire system.
118 # do-x11: builds and installs X11 if ${MKX11} != "no"; either
119 # X11R7 from src/external/mit/xorg if ${X11FLAVOUR} == "Xorg"
120 # or X11R6 from src/x11
121 # do-extsrc: builds and installs extsrc if ${MKEXTSRC} != "no".
122 # do-obsolete: installs the obsolete sets (for the postinstall-* targets).
123 #
124
125 .if ${.MAKEFLAGS:M${.CURDIR}/share/mk} == ""
126 .MAKEFLAGS: -m ${.CURDIR}/share/mk
127 .endif
128
129 #
130 # If _SRC_TOP_OBJ_ gets set here, we will end up with a directory that may
131 # not be the top level objdir, because "make obj" can happen in the *middle*
132 # of "make build" (long after <bsd.own.mk> is calculated it). So, pre-set
133 # _SRC_TOP_OBJ_ here so it will not be added to ${.MAKEOVERRIDES}.
134 #
135 _SRC_TOP_OBJ_=
136
137 .include <bsd.own.mk>
138
139 #
140 # Sanity check: make sure that "make build" is not invoked simultaneously
141 # with a standard recursive target.
142 #
143
144 .if make(build) || make(release) || make(snapshot)
145 .for targ in ${TARGETS:Nobj:Ncleandir}
146 .if make(${targ}) && !target(.BEGIN)
147 .BEGIN:
148 @echo 'BUILD ABORTED: "make build" and "make ${targ}" are mutually exclusive.'
149 @false
150 .endif
151 .endfor
152 .endif
153
154 #
155 # _SUBDIR is used to set SUBDIR, after removing directories that have
156 # BUILD_${dir}=no, or that have no ${dir}/Makefile.
157 #
158 _SUBDIR= tools lib include gnu external crypto/external bin games
159 _SUBDIR+= libexec sbin usr.bin
160 _SUBDIR+= usr.sbin share rescue sys etc tests compat .WAIT distrib regress
161
162 .for dir in ${_SUBDIR}
163 .if "${dir}" == ".WAIT" \
164 || (${BUILD_${dir}:Uyes} != "no" && exists(${dir}/Makefile))
165 SUBDIR+= ${dir}
166 .endif
167 .endfor
168
169 .if exists(regress)
170 regression-tests: .PHONY .MAKE
171 @echo Running regression tests...
172 ${MAKEDIRTARGET} regress regress
173 .endif
174
175 .if ${MKUNPRIVED} != "no"
176 NOPOSTINSTALL= # defined
177 .endif
178
179 afterinstall: .PHONY .MAKE
180 .if ${MKMAN} != "no"
181 ${MAKEDIRTARGET} share/man makedb
182 .endif
183 .if (${MKUNPRIVED} != "no" && ${MKINFO} != "no")
184 ${MAKEDIRTARGET} gnu/usr.bin/texinfo/install-info infodir-meta
185 .endif
186 .if !defined(NOPOSTINSTALL)
187 ${MAKEDIRTARGET} . postinstall-check
188 .endif
189
190 _POSTINSTALL= ${.CURDIR}/usr.sbin/postinstall/postinstall
191 _POSTINSTALL_ENV= \
192 AWK=${TOOL_AWK:Q} \
193 DB=${TOOL_DB:Q} \
194 MAKE=${MAKE:Q} \
195 PWD_MKDB=${TOOL_PWD_MKDB:Q} \
196 STAT=${TOOL_STAT:Q}
197
198 postinstall-check: .PHONY
199 @echo " === Post installation checks ==="
200 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ check; if [ $$? -gt 1 ]; then exit 1; fi
201 @echo " ================================"
202
203 postinstall-fix: .NOTMAIN .PHONY
204 @echo " === Post installation fixes ==="
205 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix
206 @echo " ==============================="
207
208 postinstall-fix-obsolete: .NOTMAIN .PHONY
209 @echo " === Removing obsolete files ==="
210 ${_POSTINSTALL_ENV} ${HOST_SH} ${_POSTINSTALL} -s ${.CURDIR} -d ${DESTDIR}/ fix obsolete
211 @echo " ==============================="
212
213
214 #
215 # Targets (in order!) called by "make build".
216 #
217 .if defined(HAVE_GCC)
218 .if ${HAVE_GCC} == "4"
219 LIBGCC_EXT=4
220 BUILD_CC_LIB_BASEDIR= gnu/lib
221 BUILD_CC_LIB_BASETARGET= gnu-lib
222 .else
223 LIBGCC_EXT=
224 BUILD_CC_LIB_BASEDIR= external/gpl3/gcc/lib
225 BUILD_CC_LIB_BASETARGET= external-gpl3-gcc-lib
226 .endif
227 .endif
228
229 BUILDTARGETS+= check-tools
230 .if ${MKUPDATE} == "no" && !defined(NOCLEANDIR)
231 BUILDTARGETS+= cleandir
232 .endif
233 .if ${MKOBJDIRS} != "no"
234 BUILDTARGETS+= do-top-obj
235 .endif
236 .if ${USETOOLS} == "yes" # {
237 .if ${MKOBJDIRS} != "no"
238 BUILDTARGETS+= do-tools-obj
239 .endif
240 BUILDTARGETS+= do-tools
241 .endif # USETOOLS # }
242 .if ${MKOBJDIRS} != "no"
243 BUILDTARGETS+= obj
244 .endif
245 BUILDTARGETS+= clean_METALOG
246 .if !defined(NODISTRIBDIRS)
247 BUILDTARGETS+= do-distrib-dirs
248 .endif
249 .if !defined(NOINCLUDES)
250 BUILDTARGETS+= includes
251 .endif
252 BUILDTARGETS+= do-tools-compat
253 BUILDTARGETS+= do-lib-csu
254 .if ${MKGCC} != "no"
255 BUILDTARGETS+= do-libgcc
256 .endif
257 .if ${MKPCC} != "no"
258 BUILDTARGET+= do-libpcc
259 .endif
260 BUILDTARGETS+= do-lib-libc
261 BUILDTARGETS+= do-lib
262 .if ${MKKMOD} != "no"
263 BUILDTARGETS+= do-sys-modules
264 .endif
265 .if ${MKRUMP} != "no"
266 BUILDTARGETS+= do-sys-rump-dev-lib do-sys-rump-fs-lib
267 BUILDTARGETS+= do-sys-rump-kern-lib do-sys-rump-net-lib
268 .endif
269 .if ${MKCOMPAT} != "no"
270 BUILDTARGETS+= do-compat-lib-csu
271 BUILDTARGETS+= do-compat-libgcc
272 BUILDTARGETS+= do-compat-lib-libc
273 .endif
274 BUILDTARGETS+= do-ld.so
275 BUILDTARGETS+= do-build
276 .if ${MKX11} != "no"
277 BUILDTARGETS+= do-x11
278 .endif
279 .if ${MKEXTSRC} != "no"
280 BUILDTARGETS+= do-extsrc
281 .endif
282 BUILDTARGETS+= do-obsolete
283
284 #
285 # Enforce proper ordering of some rules.
286 #
287
288 .ORDER: ${BUILDTARGETS}
289 includes-lib: .PHONY includes-include includes-sys
290 includes-gnu: .PHONY includes-lib
291
292 #
293 # Build the system and install into DESTDIR.
294 #
295
296 START_TIME!= date
297
298 build: .PHONY .MAKE
299 .if defined(BUILD_DONE)
300 @echo "Build already installed into ${DESTDIR}"
301 .else
302 @echo "Build started at: ${START_TIME}"
303 .for tgt in ${BUILDTARGETS}
304 ${MAKEDIRTARGET} . ${tgt}
305 .endfor
306 ${MAKEDIRTARGET} etc install-etc-release
307 @echo "Build started at: ${START_TIME}"
308 @printf "Build finished at: " && date
309 .endif
310
311 #
312 # Build a full distribution, but not a release (i.e. no sets into
313 # ${RELEASEDIR}). "buildworld" enforces a build to ${DESTDIR} != /
314 #
315
316 distribution buildworld: .PHONY .MAKE
317 .if make(buildworld) && \
318 (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
319 @echo "Won't make ${.TARGET} with DESTDIR=/"
320 @false
321 .endif
322 ${MAKEDIRTARGET} . build NOPOSTINSTALL=1
323 ${MAKEDIRTARGET} etc distribution INSTALL_DONE=1
324 .if defined(DESTDIR) && ${DESTDIR} != "" && ${DESTDIR} != "/"
325 ${MAKEDIRTARGET} . postinstall-fix-obsolete
326 ${MAKEDIRTARGET} distrib/sets checkflist
327 .endif
328 @echo "make ${.TARGET} started at: ${START_TIME}"
329 @printf "make ${.TARGET} finished at: " && date
330
331 #
332 # Install the distribution from $DESTDIR to $INSTALLWORLDDIR (defaults to `/')
333 # If installing to /, ensures that the host's operating system is NetBSD and
334 # the host's `uname -m` == ${MACHINE}.
335 #
336
337 HOST_UNAME_S!= uname -s
338 HOST_UNAME_M!= uname -m
339
340 installworld: .PHONY .MAKE
341 .if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
342 @echo "Can't make ${.TARGET} to DESTDIR=/"
343 @false
344 .endif
345 .if !defined(INSTALLWORLDDIR) || \
346 ${INSTALLWORLDDIR} == "" || ${INSTALLWORLDDIR} == "/"
347 .if (${HOST_UNAME_S} != "NetBSD")
348 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLWORLDDIR=/"
349 @false
350 .endif
351 .if (${HOST_UNAME_M} != ${MACHINE})
352 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLWORLDDIR=/"
353 @false
354 .endif
355 .endif
356 ${MAKEDIRTARGET} distrib/sets installsets \
357 INSTALLDIR=${INSTALLWORLDDIR:U/} INSTALLSETS=${INSTALLSETS:Q}
358 ${MAKEDIRTARGET} . postinstall-check DESTDIR=${INSTALLWORLDDIR}
359 @echo "make ${.TARGET} started at: ${START_TIME}"
360 @printf "make ${.TARGET} finished at: " && date
361
362 #
363 # Install modules from $DESTDIR to $INSTALLMODULESDIR
364 #
365 installmodules: .PHONY .MAKE
366 .if (!defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/")
367 @echo "Can't make ${.TARGET} to DESTDIR=/"
368 @false
369 .endif
370 .if !defined(INSTALLMODULESDIR) || \
371 ${INSTALLMODULESDIR} == "" || ${INSTALLMODULESDIR} == "/"
372 .if (${HOST_UNAME_S} != "NetBSD")
373 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_S} to NetBSD with INSTALLMODULESDIR=/"
374 @false
375 .endif
376 .if (${HOST_UNAME_M} != ${MACHINE})
377 @echo "Won't cross-make ${.TARGET} from ${HOST_UNAME_M} to ${MACHINE} with INSTALLMODULESDIR=/"
378 @false
379 .endif
380 .endif
381 ${MAKEDIRTARGET} sys/modules install DESTDIR=${INSTALLMODULESDIR:U/}
382 @echo "make ${.TARGET} started at: ${START_TIME}"
383 @printf "make ${.TARGET} finished at: " && date
384
385 #
386 # Create sets from $DESTDIR or $NETBSDSRCDIR into $RELEASEDIR
387 #
388
389 .for tgt in sets sourcesets syspkgs
390 ${tgt}: .PHONY .MAKE
391 ${MAKEDIRTARGET} distrib/sets ${tgt}
392 .endfor
393
394 #
395 # Build a release or snapshot (implies "make distribution"). Note that
396 # in this case, the set lists will be checked before the tar files
397 # are made.
398 #
399
400 release snapshot: .PHONY .MAKE
401 ${MAKEDIRTARGET} . distribution
402 ${MAKEDIRTARGET} etc release DISTRIBUTION_DONE=1
403 @echo "make ${.TARGET} started at: ${START_TIME}"
404 @printf "make ${.TARGET} finished at: " && date
405
406 #
407 # Create a CD-ROM image.
408 #
409
410 iso-image: .PHONY
411 ${MAKEDIRTARGET} distrib iso_image
412 ${MAKEDIRTARGET} etc iso-image
413 @echo "make ${.TARGET} started at: ${START_TIME}"
414 @printf "make ${.TARGET} finished at: " && date
415
416 iso-image-source: .PHONY
417 ${MAKEDIRTARGET} distrib iso_image CDSOURCE=true
418 ${MAKEDIRTARGET} etc iso-image
419 @echo "make ${.TARGET} started at: ${START_TIME}"
420 @printf "make ${.TARGET} finished at: " && date
421
422 #
423 # Create bootable live images.
424 #
425
426 live-image: .PHONY
427 ${MAKEDIRTARGET} etc live-image
428 @echo "make ${.TARGET} started at: ${START_TIME}"
429 @printf "make ${.TARGET} finished at: " && date
430
431 #
432 # Create bootable installation images.
433 #
434
435 install-image: .PHONY
436 ${MAKEDIRTARGET} etc install-image
437 @echo "make ${.TARGET} started at: ${START_TIME}"
438 @printf "make ${.TARGET} finished at: " && date
439
440 #
441 # Special components of the "make build" process.
442 #
443
444 check-tools: .PHONY
445 .if ${TOOLCHAIN_MISSING} != "no" && !defined(EXTERNAL_TOOLCHAIN)
446 @echo '*** WARNING: Building on MACHINE=${MACHINE} with missing toolchain.'
447 @echo '*** May result in a failed build or corrupt binaries!'
448 .elif defined(EXTERNAL_TOOLCHAIN)
449 @echo '*** Using external toolchain rooted at ${EXTERNAL_TOOLCHAIN}.'
450 .endif
451 .if defined(NBUILDJOBS)
452 @echo '*** WARNING: NBUILDJOBS is obsolete; use -j directly instead!'
453 .endif
454
455 # Delete or sanitise a leftover METALOG from a previous build.
456 clean_METALOG: .PHONY .MAKE
457 .if ${MKUPDATE} != "no"
458 ${MAKEDIRTARGET} distrib/sets clean_METALOG
459 .endif
460
461 do-distrib-dirs: .PHONY .MAKE
462 .if !defined(DESTDIR) || ${DESTDIR} == ""
463 ${MAKEDIRTARGET} etc distrib-dirs DESTDIR=/
464 .else
465 ${MAKEDIRTARGET} etc distrib-dirs DESTDIR=${DESTDIR}
466 .endif
467
468 .for targ in cleandir obj includes
469 do-${targ}: .PHONY ${targ}
470 @true
471 .endfor
472
473 .if defined(HAVE_GCC)
474 .if ${USE_COMPILERCRTSTUFF} == "yes"
475 BUILD_CC_LIB= ${BUILD_CC_LIB_BASEDIR}/crtstuff${LIBGCC_EXT}
476 .endif
477 BUILD_CC_LIB+= ${BUILD_CC_LIB_BASEDIR}/libgcc${LIBGCC_EXT}
478 .elif defined(HAVE_PCC)
479 BUILD_CC_LIB+= external/bsd/pcc/crtstuff
480 BUILD_CC_LIB+= external/bsd/pcc/libpcc
481 .endif
482
483 .for dir in tools tools/compat lib/csu ${BUILD_CC_LIB} lib/libc lib sys/rump/dev/lib sys/rump/fs/lib sys/rump/kern/lib sys/rump/net/lib sys/modules
484 do-${dir:S/\//-/g}: .PHONY .MAKE
485 .for targ in dependall install
486 ${MAKEDIRTARGET} ${dir} ${targ}
487 .endfor
488 .endfor
489
490 .if ${MKCOMPAT} != "no"
491 COMPAT_SUBDIR_LIST=lib/csu ${BUILD_CC_LIB} lib/libc
492 .for dir in ${COMPAT_SUBDIR_LIST}
493 do-compat-${dir:S/\//-/g}: .PHONY .MAKE
494 .for targ in dependall install
495 ${MAKEDIRTARGET} compat ${targ} BOOTSTRAP_SUBDIRS="../../../${dir}"
496 .endfor
497 .endfor
498 .endif
499
500 do-top-obj: .PHONY .MAKE
501 ${MAKEDIRTARGET} . obj NOSUBDIR=
502
503 do-tools-obj: .PHONY .MAKE
504 ${MAKEDIRTARGET} tools obj
505
506 do-libgcc: .PHONY .MAKE
507 .if defined(HAVE_GCC)
508 .if ${MKGCC} != "no"
509 .if ${USE_COMPILERCRTSTUFF} == "yes"
510 ${MAKEDIRTARGET} . do-${BUILD_CC_LIB_BASETARGET}-crtstuff${LIBGCC_EXT}
511 .endif
512 ${MAKEDIRTARGET} . do-${BUILD_CC_LIB_BASETARGET}-libgcc${LIBGCC_EXT}
513 .endif
514 .endif
515
516 do-compat-libgcc: .PHONY .MAKE
517 .if defined(HAVE_GCC)
518 .if ${MKGCC} != "no"
519 .if ${USE_COMPILERCRTSTUFF} == "yes"
520 ${MAKEDIRTARGET} . do-compat-${BUILD_CC_LIB_BASETARGET}-crtstuff${LIBGCC_EXT}
521 .endif
522 ${MAKEDIRTARGET} . do-compat-${BUILD_CC_LIB_BASETARGET}-libgcc${LIBGCC_EXT}
523 .endif
524 .endif
525
526 do-libpcc: .PHONY .MAKE
527 .if defined(HAVE_PCC)
528 .if ${MKPCC} != "no"
529 .if ${USE_COMPILERCRTSTUFF} == "yes"
530 ${MAKEDIRTARGET} . do-pcc-lib-crtstuff
531 .endif
532 ${MAKEDIRTARGET} . do-pcc-lib-libpcc
533 .endif
534 .endif
535
536 do-ld.so: .PHONY .MAKE
537 .for targ in dependall install
538 ${MAKEDIRTARGET} libexec/ld.elf_so ${targ}
539 .endfor
540
541 do-build: .PHONY .MAKE
542 .for targ in dependall install
543 ${MAKEDIRTARGET} . ${targ} BUILD_tools=no BUILD_lib=no
544 .endfor
545
546 do-x11: .PHONY .MAKE
547 .if ${MKX11} != "no"
548 .if ${X11FLAVOUR} == "Xorg"
549 ${MAKEDIRTARGET} external/mit/xorg build
550 .else
551 ${MAKEDIRTARGET} x11 build
552 .endif
553 .else
554 @echo "MKX11 is not enabled"
555 @false
556 .endif
557
558 do-extsrc: .PHONY .MAKE
559 .if ${MKEXTSRC} != "no"
560 ${MAKEDIRTARGET} extsrc build
561 .else
562 @echo "MKEXTSRC is not enabled"
563 @false
564 .endif
565
566 do-obsolete: .PHONY .MAKE
567 ${MAKEDIRTARGET} etc install-obsolete-lists
568
569 #
570 # Speedup stubs for some subtrees that don't need to run these rules.
571 # (Tells <bsd.subdir.mk> not to recurse for them.)
572 #
573
574 .for dir in bin etc distrib games libexec regress sbin usr.bin usr.sbin tools
575 includes-${dir}: .PHONY
576 @true
577 .endfor
578 .for dir in etc distrib regress
579 install-${dir}: .PHONY
580 @true
581 .endfor
582
583 #
584 # XXX this needs to change when distrib Makefiles are recursion compliant
585 # XXX many distrib subdirs need "cd etc && make snap_pre snap_kern" first...
586 #
587 dependall-distrib depend-distrib all-distrib: .PHONY
588 @true
589
590 .include <bsd.sys.mk>
591 .include <bsd.obj.mk>
592 .include <bsd.kernobj.mk>
593 .include <bsd.subdir.mk>
594
595 #
596 # Display current make(1) parameters
597 #
598 params: .PHONY .MAKE
599 ${MAKEDIRTARGET} etc params
600