UPDATING revision 1.364
1 1.364 martin $NetBSD: UPDATING,v 1.364 2024/11/10 13:40:00 martin Exp $ 2 1.1 abs 3 1.123 jmc This file (UPDATING) is intended to be a brief reference to recent 4 1.123 jmc changes that might cause problems in the build process, and a guide for 5 1.123 jmc what to do if something doesn't work. 6 1.1 abs 7 1.123 jmc For a more detailed description of the recommended way to build NetBSD 8 1.123 jmc using build.sh, see the BUILDING file. 9 1.123 jmc 10 1.123 jmc Note that much of the advice in this UPDATING file was written before 11 1.123 jmc build.sh existed. Nevertheless, the advice here may be useful for 12 1.123 jmc working around specific problems with build.sh. 13 1.123 jmc 14 1.257 apb Sections are marked with "^^^^^". After the section on "Recent changes" 15 1.257 apb are several sections containing more general information. 16 1.257 apb 17 1.123 jmc See also: BUILDING, build.sh, Makefile. 18 1.1 abs 19 1.1 abs Recent changes: 20 1.1 abs ^^^^^^^^^^^^^^^ 21 1.230 tls 22 1.363 martin 20241104: 23 1.363 martin Changes around the integration of the zstd compression 24 1.363 martin library may require manual deletion of some object directories 25 1.363 martin if you update from a build from a few days ago. 26 1.363 martin rm -rf ${OBJ}/tools/gcc/ ${OBJ}/external/gpl3/gcc/ 27 1.363 martin rm -rf ${OBJ}/external/bsd/libarchive/ ${OBJ}/external/bsd/file/ 28 1.364 martin Also remove libzstd from ${DEST}: rm ${DEST}/usr/lib/libzstd* 29 1.363 martin 30 1.360 wiz 20240926: 31 1.360 wiz Building -current when running on amd64 from about 20240924 32 1.360 wiz to about 20240926 will not work due to a "malloc_np.h" 33 1.360 wiz error. Please downgrade to a version from 20240924 or older, 34 1.360 wiz or upgrade to a newer version e.g. using a binary release from 35 1.360 wiz the NetBSD build servers. 36 1.360 wiz 37 1.358 martin 20240923: 38 1.358 martin Update builds will require cleaning the object directories for 39 1.359 martin jemalloc (like: "rm -rf $OBJ/external/bsd/jemalloc*") and the 40 1.359 martin libc dependency files (like: "rm $OBJ/lib/libc/jemalloc.*"). 41 1.359 martin On architectures with COMPAT libs, those also have to be cleaned, 42 1.359 martin e.g. on sparc64: "rm -rf $OBJ/compat/sparc64/sparc/external/bsd/jemalloc*" 43 1.359 martin and "rm $OBJ/compat/sparc64/sparc/lib/libc/jemalloc.*". 44 1.358 martin 45 1.357 christos 20240817: 46 1.357 christos Update builds will require cleaning in src/external/historical/nawk/bin 47 1.357 christos in order to remove the awk binary since now there is a subdirectory 48 1.357 christos called awk. 49 1.358 martin 50 1.355 martin 20240812: 51 1.355 martin Update builds will require removing the tools objdir for gdb 52 1.355 martin if building with MKCROSSGDB=yes. All architectures use gdb.old 53 1.355 martin now. 54 1.356 riastrad 55 1.354 martin 20240630: 56 1.353 martin Update builds will require removing the tools objdir for binutils 57 1.353 martin (as most architectures should use binutils.old now). 58 1.353 martin 59 1.352 kre 20240610: 60 1.352 kre Update builds are likely to require removing the objdir for 61 1.352 kre distrib/<arch>/cdroms - or at least references to libarchive 62 1.352 kre from within there after the recent libarchive update. 63 1.352 kre 64 1.350 riastrad 20240504: 65 1.350 riastrad Update builds on x86 require making the `cleandir' target in 66 1.350 riastrad lib/libm, or deleting the objdir for lib/libm. 67 1.350 riastrad 68 1.349 maya 20240423: 69 1.349 maya Update builds with x11 may fail after switching to Mesa 21. 70 1.349 maya 71 1.346 riastrad 20240410: 72 1.346 riastrad Update builds may require manually deleting 73 1.346 riastrad $DESTDIR/var/run/named (and, potentially, 74 1.346 riastrad $DESTDIR/var/run/lwresd) in order to avoid checkflist failure. 75 1.346 riastrad 76 1.347 nia 20240409: 77 1.347 nia 32-bit compatibility libraries were moved into the base32 78 1.347 nia and debug32 sets. HTML man pages were moved into the manhtml set. 79 1.347 nia 80 1.343 riastrad 20230828: 81 1.343 riastrad If: 82 1.343 riastrad - you updated to current and ran postinstall between 20230826 83 1.343 riastrad and 20230828 inclusive, and 84 1.343 riastrad - you are not using anything outside the base system to 85 1.343 riastrad populate /etc/openssl/certs (e.g., manually adding 86 1.343 riastrad certificates or using ca-certificates or mozilla-rootcerts or 87 1.343 riastrad mozilla-rootcerts-openssl from pkgsrc), 88 1.343 riastrad delete /etc/openssl/certs and rerun postinstall or just 89 1.343 riastrad `certctl rehash'. 90 1.343 riastrad 91 1.343 riastrad Otherwise, certctl(8) will think someone else has left 92 1.343 riastrad /etc/openssl/certs in the way and will avoid clobbering it on 93 1.343 riastrad upgrade from older NetBSD. 94 1.343 riastrad 95 1.341 lukem 20230718: 96 1.341 lukem build.sh will use mk.conf in the same directory as build.sh instead 97 1.341 lukem of /etc/mk.conf, unless MAKECONF is already defined in the environment. 98 1.341 lukem 99 1.342 martin 20230714: 100 1.342 martin Import of gcc 10.5 requires a clean build of at least tools/gcc 101 1.342 martin and external/gpl3/gcc* object directories. An update build 102 1.342 martin without cleaning will result in obscure failures in rare corner 103 1.342 martin cases. 104 1.342 martin 105 1.339 martin 20230604: 106 1.339 martin Building native kernels with the installed make(1) instead of 107 1.339 martin the $TOOLDIR/bin/nbmake-${arch} wrapper will fail if userland 108 1.339 martin has not been updated. Note that this is an unsupported build 109 1.339 martin configuration (but usually works if userland is -current enough). 110 1.338 lukem 111 1.338 lukem 20230523: 112 1.338 lukem ctfmerge was fixed as macOS host tool. This may require a clean tools 113 1.338 lukem rebuild to detect the update to tools/compat/configure. 114 1.338 lukem 115 1.340 martin 20230515: 116 1.340 martin New openssl build requires removal of the crypto/external/bsd/openssl 117 1.345 andvar and tests/crypto/libcrypto subdirectories in the ${OBJDIR} hierarchy. 118 1.340 martin Otherwise test results may be wrong due to wrong "golden" output 119 1.340 martin files being installed. 120 1.340 martin 121 1.337 mrg 20230322: 122 1.337 mrg Fixes for moved /lib/libisns* mean that builds will complain about 123 1.337 mrg ./usr/lib/libisns* being missing until src/lib/libisns is forced 124 1.337 mrg to (re)install the files, including the symlinks. The simplest 125 1.337 mrg way is to clean this subdir before building. 126 1.337 mrg 127 1.336 martin 20230112: 128 1.336 martin New binutils require an updated ld.elf_so. If you are doing 129 1.336 martin (unsupported) in-place self builds (with the -E flag to build.sh), 130 1.336 martin make sure to have installed latest ld.elf_so before you rebuild 131 1.336 martin userland. 132 1.336 martin 133 1.335 chs 20221116: 134 1.335 chs The addition to NetBSD's version of UFS2 of support for extended 135 1.335 chs attributes broke backward compatibility with previous releases 136 1.335 chs of NetBSD, so UFS2 has been restored to being compatible with 137 1.335 chs previous NetBSD releases by disabling extended attributes. 138 1.335 chs (Note that ACLs are implemented as extended attributes, so 139 1.335 chs this changes disables ACLs as well.) 140 1.335 chs 141 1.335 chs Support for UFS2 with extended attributes is now available in a new 142 1.335 chs UFS variant called UFS2ea. If you have created extended attributes 143 1.335 chs in an original UFS2 file system then "fsck -p" will now fail due to 144 1.335 chs the unexpected presence of extended attributes and "fsck -y" will 145 1.335 chs remove all extended attributes. If you wish to preserve extended 146 1.335 chs attributes rather than delete them, there is a utility to convert 147 1.335 chs a UFS2 file system to UFS2ea and leave extended attributes in place, 148 1.335 chs but this should be used with caution since it will preserve any 149 1.335 chs extended attributes that have been corrupted by the backward 150 1.335 chs incompatibility too. 151 1.335 chs 152 1.335 chs If you wish to use a UFS2ea file system as your root file system, 153 1.335 chs then you will need to update your boot loader to a version that 154 1.335 chs supports UFS2ea. 155 1.335 chs 156 1.335 chs For more information, see: 157 1.335 chs https://wiki.netbsd.org/features/UFS2ea 158 1.335 chs 159 1.334 mrg 20221111: 160 1.334 mrg The new libdrm import worsened the conflict issues for the 161 1.334 mrg kdump/ktruss ioctl, and i915 now conflicts with base, and has 162 1.334 mrg been turned off. This will cause update build issues like: 163 1.334 mrg 164 1.334 mrg kdump-ioctl.c:12175:143: error: 'DRM_IOCTL_I915_DESTROY_HEAP' 165 1.334 mrg undeclared here (not in a function); 166 1.334 mrg did you mean 'DRM_IOCTL_MODE_DESTROY_DUMB'? 167 1.334 mrg 168 1.334 mrg You'll need to clean usr.bin/ktruss, usr.bin/kdump, and rescue. 169 1.334 mrg 170 1.331 riastrad 20220921: 171 1.331 riastrad Since the kernel version was bumped to 9.99.100, the bootloader 172 1.333 riastrad must be updated on x86 or EFI boot platforms in order to load 173 1.333 riastrad modules from boot.cfg(5) or interactively at the bootloader 174 1.333 riastrad prompt. 175 1.333 riastrad 176 1.333 riastrad The kernel can still load modules at runtime, with modload(8) 177 1.333 riastrad or modules.conf(5), with no bootloader update. This will not 178 1.333 riastrad affect release branches because it only applies to patch 179 1.333 riastrad numbers >=100. 180 1.333 riastrad 181 1.333 riastrad On x86 (i386 or amd64) with BIOS boot, this requires copying a 182 1.333 riastrad new /usr/mdec/boot to /boot. You can build this in the destdir 183 1.333 riastrad by running `$TOOLDIR/bin/nbmake-$ARCH dependall install' in 184 1.333 riastrad sys/arch/i386/stand. 185 1.333 riastrad 186 1.333 riastrad On platforms with EFI boot (including x86 with EFI boot), this 187 1.333 riastrad requires copying a new /usr/mdec/boot*.efi to the EFI/BOOT/ 188 1.333 riastrad directory on the EFI system partition. The boot*.efi file is: 189 1.333 riastrad 190 1.333 riastrad aarch64 bootaa64.efi 191 1.333 riastrad amd64 bootx64.efi 192 1.333 riastrad arm bootarm.efi (32-bit arm) 193 1.333 riastrad i386 bootx32.efi 194 1.333 riastrad 195 1.333 riastrad You can build this in the destdir by running 196 1.333 riastrad `$TOOLDIR/bin/nbmake-$ARCH dependall install' in 197 1.333 riastrad sys/stand/efiboot/boot*. 198 1.331 riastrad 199 1.330 lukem 20220821: 200 1.330 lukem Support for building extsrc/ has been deprecated. 201 1.330 lukem EXTSRCSRCDIR and MKEXTSRC have been deprecated. 202 1.330 lukem 203 1.329 mrg 20220714: 204 1.329 mrg Updates to xorg-server and associated drivers may cause builds to 205 1.329 mrg fail. Cleaning both DESTDIR and the xorg build tree may be needed. 206 1.329 mrg 207 1.328 martin 20220628: 208 1.328 martin Changes in the build of src/games/robots require a clean build 209 1.328 martin of that program. 210 1.328 martin 211 1.324 martin 20211116: 212 1.324 martin Changes in the xorg build require clean obj dirs for external/mit/xorg 213 1.325 martin (or a full clean/non-update build). 214 1.324 martin 215 1.323 nia 20211112: 216 1.323 nia Device tree sources were updated for evbarm. Some device nodes 217 1.323 nia (in particular, ld(4) devices on the ROCKPro64) will be renumbered. 218 1.323 nia 219 1.322 martin 20211014: 220 1.323 nia MKPIE default for aarch64 has changed, a clean build is required. 221 1.322 martin 222 1.321 christos 20210917: 223 1.321 christos Changed MNT_ACLS to default to POSIX1e ACLs instead of NFSv4 224 1.321 christos ACLs, to be compatible with FreeBSD. If you are using NFSv4 ACLs 225 1.321 christos and have "acls" in /etc/fstab you'll need to change it to "nfs4acls". 226 1.321 christos 227 1.319 mrg 20210711: 228 1.319 mrg Updated GMP sources may require cleaning in tools/gmp and/or in 229 1.319 mrg external/lgpl3/gmp/lib, particularly if GCC itself does not build. 230 1.319 mrg 231 1.318 mrg 20210417: 232 1.318 mrg GCC 10 was enabled for several platforms. If builds fail in either 233 1.351 gutterid tools/gcc or external/gpl3/gcc, first try cleaning those objects and 234 1.318 mrg removing the $DESTDIR/usr/include/g++ subdirectory. 235 1.318 mrg 236 1.316 mrg 20201016: 237 1.316 mrg MIPS kernel modules have been disabled until they work. This will 238 1.316 mrg turn up in extra files in the DESTDIR, which should be cleaned. 239 1.316 mrg 240 1.315 mrg 20200925: 241 1.315 mrg GNU MPC and MPFR have been updated. At least MPFR needs cleaning 242 1.315 mrg in both the tools and external dirs. 243 1.315 mrg 244 1.314 mrg 20200912: 245 1.314 mrg GCC 9 has arrived for Arm and x86 platforms, and will be coming 246 1.314 mrg for several more, as will binutils 2.34. Clean as required. 247 1.314 mrg 248 1.313 mrg 20200907: 249 1.313 mrg GCC 9 is coming, and binutils has been updated for MIPS. This 250 1.313 mrg probably requires cleaning the tools/binutils. 251 1.313 mrg 252 1.311 mrg 20200811: 253 1.312 mrg GCC updates may require cleaning the objdir. This may occur 254 1.312 mrg due to GCC 7.5 update, GCC 8.4 move to gcc.old, or the upcoming 255 1.312 mrg GCC 9 upgrade. 256 1.311 mrg 257 1.309 christos 20200614: 258 1.310 christos blacklist* has been renamed to blocklist*. postinstall(8) 259 1.332 gutterid should handle the migration. 260 1.309 christos 261 1.308 christos 20200601: 262 1.308 christos Due to a mistake in LIBISPRIVATE handling, .so libraries were 263 1.308 christos created in the build directories and need cleaning. 264 1.308 christos 265 1.307 mrg 20200311: 266 1.307 mrg GCC 8 ports will need cleaning in src/tools/gcc and 267 1.307 mrg src/external/gpl3/gcc due to GCC 8.4 update. 268 1.307 mrg 269 1.306 christos 20191118: 270 1.306 christos More architectures were switched to gcc8: 271 1.306 christos i386, ia64 powerpc64, sparc, sparc64, arm 272 1.306 christos The same comments as in 20191022 apply. 273 1.306 christos 274 1.305 martin 20191112: 275 1.305 martin The LLVM update requires a clean rebuild for all architectures using 276 1.305 martin LLVM during the tools build phase (i386, amd64, aarch64). 277 1.305 martin 278 1.304 martin 20191022: 279 1.304 martin Ports amd64 and aarch64 switched to GCC 8.3 by default. 280 1.304 martin In-place ("expert mode", build.sh -E) builds are not supported 281 1.304 martin when going from a GCC 7 userland to GCC 8. Do a regular 282 1.304 martin build to a different DESTDIR (or preferably: build.sh -U) at least 283 1.306 christos once and install sets, or download comp.{tar.xz,tgz} from the 284 1.304 martin daily builds and install that before doing the next in-place build. 285 1.304 martin 286 1.303 mrg 20191001: 287 1.303 mrg GCC 8.3 was imported. Builds of src/tools/gcc may fail if 288 1.303 mrg old builds with GCC 7 output now uses GCC 8. Clean this 289 1.303 mrg directory, and also clean src/external/gpl3/gcc. 290 1.303 mrg 291 1.302 riastrad 20190903: 292 1.306 christos Files with names that coincide with existing files' names on 293 1.302 riastrad case-insensitive file systems were inadvertently committed, for 294 1.302 riastrad radeon GPU firmware. We cannot mark these as obsolete for 295 1.302 riastrad postinstall to fix, so if you updated src since 2019-08-26, and 296 1.302 riastrad ran build.sh distribution or ran build.sh release, you must 297 1.302 riastrad manually delete the following files in your DESTDIR (which is 298 1.302 riastrad usually $OBJDIR/destir.$ARCH), or from / if you have installed 299 1.302 riastrad them: 300 1.302 riastrad 301 1.302 riastrad /libdata/firmware/radeon/bonaire_ce.bin 302 1.302 riastrad /libdata/firmware/radeon/bonaire_mc.bin 303 1.302 riastrad /libdata/firmware/radeon/bonaire_me.bin 304 1.302 riastrad /libdata/firmware/radeon/bonaire_mec.bin 305 1.302 riastrad /libdata/firmware/radeon/bonaire_pfp.bin 306 1.302 riastrad /libdata/firmware/radeon/bonaire_rlc.bin 307 1.302 riastrad /libdata/firmware/radeon/bonaire_sdma.bin 308 1.302 riastrad /libdata/firmware/radeon/bonaire_smc.bin 309 1.302 riastrad /libdata/firmware/radeon/bonaire_uvd.bin 310 1.302 riastrad /libdata/firmware/radeon/hainan_ce.bin 311 1.302 riastrad /libdata/firmware/radeon/hainan_mc.bin 312 1.302 riastrad /libdata/firmware/radeon/hainan_me.bin 313 1.302 riastrad /libdata/firmware/radeon/hainan_pfp.bin 314 1.302 riastrad /libdata/firmware/radeon/hainan_rlc.bin 315 1.302 riastrad /libdata/firmware/radeon/hainan_smc.bin 316 1.302 riastrad /libdata/firmware/radeon/hawaii_ce.bin 317 1.302 riastrad /libdata/firmware/radeon/hawaii_mc.bin 318 1.302 riastrad /libdata/firmware/radeon/hawaii_me.bin 319 1.302 riastrad /libdata/firmware/radeon/hawaii_mec.bin 320 1.302 riastrad /libdata/firmware/radeon/hawaii_pfp.bin 321 1.302 riastrad /libdata/firmware/radeon/hawaii_rlc.bin 322 1.302 riastrad /libdata/firmware/radeon/hawaii_sdma.bin 323 1.302 riastrad /libdata/firmware/radeon/hawaii_smc.bin 324 1.302 riastrad /libdata/firmware/radeon/kabini_ce.bin 325 1.302 riastrad /libdata/firmware/radeon/kabini_me.bin 326 1.302 riastrad /libdata/firmware/radeon/kabini_mec.bin 327 1.302 riastrad /libdata/firmware/radeon/kabini_pfp.bin 328 1.302 riastrad /libdata/firmware/radeon/kabini_rlc.bin 329 1.302 riastrad /libdata/firmware/radeon/kabini_sdma.bin 330 1.302 riastrad /libdata/firmware/radeon/kaveri_ce.bin 331 1.302 riastrad /libdata/firmware/radeon/kaveri_me.bin 332 1.302 riastrad /libdata/firmware/radeon/kaveri_mec.bin 333 1.302 riastrad /libdata/firmware/radeon/kaveri_mec2.bin 334 1.302 riastrad /libdata/firmware/radeon/kaveri_pfp.bin 335 1.302 riastrad /libdata/firmware/radeon/kaveri_rlc.bin 336 1.302 riastrad /libdata/firmware/radeon/kaveri_sdma.bin 337 1.302 riastrad /libdata/firmware/radeon/mullins_ce.bin 338 1.302 riastrad /libdata/firmware/radeon/mullins_me.bin 339 1.302 riastrad /libdata/firmware/radeon/mullins_mec.bin 340 1.302 riastrad /libdata/firmware/radeon/mullins_pfp.bin 341 1.302 riastrad /libdata/firmware/radeon/mullins_rlc.bin 342 1.302 riastrad /libdata/firmware/radeon/mullins_sdma.bin 343 1.302 riastrad /libdata/firmware/radeon/oland_ce.bin 344 1.302 riastrad /libdata/firmware/radeon/oland_mc.bin 345 1.302 riastrad /libdata/firmware/radeon/oland_me.bin 346 1.302 riastrad /libdata/firmware/radeon/oland_pfp.bin 347 1.302 riastrad /libdata/firmware/radeon/oland_rlc.bin 348 1.302 riastrad /libdata/firmware/radeon/oland_smc.bin 349 1.302 riastrad /libdata/firmware/radeon/pitcairn_ce.bin 350 1.302 riastrad /libdata/firmware/radeon/pitcairn_mc.bin 351 1.302 riastrad /libdata/firmware/radeon/pitcairn_me.bin 352 1.302 riastrad /libdata/firmware/radeon/pitcairn_pfp.bin 353 1.302 riastrad /libdata/firmware/radeon/pitcairn_rlc.bin 354 1.302 riastrad /libdata/firmware/radeon/pitcairn_smc.bin 355 1.302 riastrad /libdata/firmware/radeon/tahiti_ce.bin 356 1.302 riastrad /libdata/firmware/radeon/tahiti_mc.bin 357 1.302 riastrad /libdata/firmware/radeon/tahiti_me.bin 358 1.302 riastrad /libdata/firmware/radeon/tahiti_pfp.bin 359 1.302 riastrad /libdata/firmware/radeon/tahiti_rlc.bin 360 1.302 riastrad /libdata/firmware/radeon/tahiti_smc.bin 361 1.302 riastrad /libdata/firmware/radeon/verde_ce.bin 362 1.302 riastrad /libdata/firmware/radeon/verde_mc.bin 363 1.302 riastrad /libdata/firmware/radeon/verde_me.bin 364 1.302 riastrad /libdata/firmware/radeon/verde_pfp.bin 365 1.302 riastrad /libdata/firmware/radeon/verde_rlc.bin 366 1.302 riastrad /libdata/firmware/radeon/verde_smc.bin 367 1.302 riastrad 368 1.302 riastrad We will re-import these radeon firmware images another way 369 1.302 riastrad later. 370 1.302 riastrad 371 1.301 martin 20190727: 372 1.301 martin The uefi bootloader has gained tftp support and needs a clean 373 1.301 martin build. If you do update builds, manually clean its object 374 1.301 martin directory by something like: 375 1.301 martin cd sys/arch/i386/stand/efiboot && make clean 376 1.301 martin 377 1.300 martin 20190723: 378 1.344 gutterid The jemalloc allocator in libc is now built without extended 379 1.300 martin debugging (for performance reasons). In update builds make sure 380 1.326 andvar to rebuild it completely, by removing all affected object files, 381 1.300 martin including compat builds, something like: 382 1.300 martin cd /usr/obj && find . -type d -name jemalloc|xargs rm -rf 383 1.300 martin 384 1.299 mrg 20190207: 385 1.299 mrg GCC 7 switched for many ports. Update builds are likely to fail. 386 1.299 mrg 387 1.1 abs Hints for a more successful build: 388 1.1 abs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 389 1.123 jmc Use build.sh, but do not use its "expert mode": 390 1.132 jmmv This will automatically build the tools in the 391 1.123 jmc correct order, and it will keep the tools and the 392 1.123 jmc new build products from interfering with the running 393 1.123 jmc system. This will allow you to ignore most of the 394 1.123 jmc other advice in this file. 395 1.2 mrg Build a new kernel first: 396 1.2 mrg This makes sure that any new system calls or features 397 1.2 mrg expected by the new userland will be present. This 398 1.2 mrg helps to avoid critical errors when upgrading. 399 1.1 abs Use object directories: 400 1.1 abs This helps to keep stale object 401 1.1 abs files from polluting the build if a Makefile "forgets" 402 1.1 abs about one. It also makes it easier to clean up after 403 1.1 abs a build. It's also necessary if you want to use the 404 1.1 abs same source tree for multiple machines. 405 1.123 jmc To use object directories with build.sh: 406 1.123 jmc a) invoke build.sh with the "-M" or "-O" options. 407 1.123 jmc To use object directories without using build.sh: 408 1.1 abs a) cd /usr/src ; make cleandir 409 1.2 mrg b) Add "OBJMACHINE=yes" to /etc/mk.conf 410 1.2 mrg c) Add "MKOBJDIRS=yes" to /etc/mk.conf 411 1.1 abs d) cd /usr/src ; make build 412 1.2 mrg Note that running "make obj" in a directory will create 413 1.2 mrg in obj.$MACHINE directory. 414 1.1 abs Build to a DESTDIR: 415 1.123 jmc This helps to keep old installed files (especially libraries) 416 1.123 jmc from interfering with the new build. 417 1.123 jmc To build to a DESTDIR with build.sh, use the "-D" option. 418 1.123 jmc To build to a DESTDIR without using build.sh, set the DESTDIR 419 1.123 jmc environment variable before running make build. It should be 420 1.123 jmc set to the pathname of an initially empty directory. 421 1.123 jmc Problems: if you do not use build.sh, you might need to 422 1.123 jmc update critical utilities without using DESTDIR since 423 1.123 jmc nothing is executed from what is installed in DESTDIR. 424 1.123 jmc (See critical utils, below.) 425 1.1 abs Build often: 426 1.1 abs This keeps critical utilities current enough to not choke 427 1.1 abs on any other part of the source tree that depends on up to 428 1.123 jmc date functionality. If you use build.sh, you should not have 429 1.123 jmc this problem. 430 1.241 wiz 431 1.1 abs What to do if things don't work: 432 1.1 abs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 433 1.230 tls When things don't work there are usually a few things that commonly 434 1.1 abs should be done. 435 1.1 abs 1) make includes 436 1.1 abs This should be done automatically by make build. 437 1.1 abs 2) cd share/mk && make install 438 1.1 abs Again, automatically done by make build. 439 1.1 abs 440 1.1 abs Failsafe rebuild of a small part of the tree: 441 1.1 abs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 442 1.1 abs To make sure you rebuild something correctly you want to do 443 1.1 abs something like the following: 444 1.1 abs 1) Make sure the includes and .mk files are up to date. 445 1.1 abs 2) Make sure any program used to build the particular 446 1.1 abs utility is up to date. (yacc, lex, etc...) 447 1.1 abs 3) cd ...path/to/util... 448 1.1 abs make cleandir 449 1.1 abs rm ...all obj directories... 450 1.1 abs make cleandir # yes, again 451 1.1 abs make obj 452 1.1 abs make depend && make 453 1.1 abs 454 1.1 abs Failsafe rebuild of the entire tree: 455 1.1 abs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 456 1.1 abs If you really want to make sure the source tree is clean and 457 1.2 mrg ready for a build try the following. Note that sourcing /etc/mk.conf 458 1.2 mrg (a make(1) Makefile) in this manner is not right, and will not work 459 1.2 mrg for anyone who uses any make(1) features in /etc/mk.conf. 460 1.1 abs 461 1.1 abs ---cut here--- 462 1.1 abs #!/bin/sh 463 1.1 abs . /etc/mk.conf 464 1.1 abs 465 1.58 lukem if [ -z $NETBSDSRCDIR ] ; then 466 1.58 lukem NETBSDSRCDIR=/usr/src 467 1.1 abs fi 468 1.58 lukem if [ \! -d $NETBSDSRCDIR ] ; then 469 1.1 abs echo Unable to find sources 470 1.1 abs exit 1 471 1.1 abs fi 472 1.58 lukem find $NETBSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \; 473 1.1 abs 474 1.1 abs if [ -z $BSDOBJDIR ] ; then 475 1.1 abs BSDOBJDIR=/usr/obj 476 1.1 abs fi 477 1.1 abs if [ -d $BSDOBJDIR ] ; then 478 1.1 abs rm -rf $BSDOBJDIR 479 1.1 abs fi 480 1.1 abs 481 1.58 lukem cd $NETBSDSRCDIR && make cleandir 482 1.1 abs 483 1.1 abs ---cut here--- 484 1.1 abs 485 1.1 abs Critical utilities: 486 1.1 abs ^^^^^^^^^^^^^^^^^^^ 487 1.1 abs usr.bin/make 488 1.1 abs usr.bin/yacc 489 1.1 abs usr.bin/lex 490 1.11 lukem usr.bin/xlint 491 1.142 drochner usr.bin/config 492 1.1 abs 493 1.34 simonb Other problems and possible solutions: 494 1.1 abs ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 495 1.1 abs Symptom:Complaints involving a Makefile. 496 1.17 erh Fix: Rebuild usr.bin/make: 497 1.17 erh cd usr.bin/make && make && make install 498 1.111 simonb Or, a failsafe method if that doesn't work: 499 1.348 rillig cd usr.bin/make && cc -DMAKE_NATIVE *.c -I. -o make \ 500 1.348 rillig && install make /usr/bin 501 1.17 erh 502 1.1 abs Fix: Make sure .mk files are up to date. 503 1.1 abs cd share/mk && make install 504 1.2 mrg 505 1.2 mrg Symptom:Kernel `config' fails to configure any kernel, including GENERIC. 506 1.142 drochner Fix: Rebuild usr.bin/config 507 1.1 abs 508 1.4 itojun Symptom:Obsolete intermediate files are used during compilation 509 1.4 itojun Fix: Try the following sequence of commands in the directory in question. 510 1.4 itojun make cleandir; rm `make print-objdir`; make cleandir; make obj 511 1.4 itojun (If you built the tree without "make obj" in the past, obsolete files 512 1.4 itojun may remain. The command tries to clean everything up) 513 1.5 wiz 514 1.207 mbalmer Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible 515 1.207 mbalmer pointer type 516 1.5 wiz Fix: Rebuild and install usr.bin/menuc 517 1.12 itojun 518 1.12 itojun Symptom:mklocale not found during build in share/locale/ctype 519 1.12 itojun Fix: Build and install usr.bin/mklocale 520 1.13 dogcow 521 1.86 kleink Symptom:undefined reference to `__assert13' or `__unsetenv13' 522 1.13 dogcow Fix: Rebuild and install lib/libc 523 1.13 dogcow 524 1.142 drochner Symptom:usr.bin/config fails to build. 525 1.19 cgd Fix: Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile. 526 1.13 dogcow 527 1.19 cgd Symptom:undefined reference to `getprogname' or `setprogname' 528 1.19 cgd Fix: Rebuild and install lib/libc 529 1.24 abs 530 1.223 joerg Symptom:Update build fails in src/tools/gcc complaining that a variable 531 1.223 joerg (e.g. CPPFLAGS) has changed since the previous run. 532 1.223 joerg Fix: Run "nbmake-${ARCH} clean" in src/tools/gcc or do a clean build. 533 1.257 apb 534 1.257 apb Symptom:cvs [update aborted]: cannot open directory /cvsroot/src/...: 535 1.257 apb No such file or directory. 536 1.257 apb Cause: If a directory is created by mistake, then it is sometimes 537 1.257 apb deleted from the CVS repository using administrative commands 538 1.257 apb that bypass the normal cvs access controls. If your cvs working tree 539 1.257 apb contains references to a directory that has been deleted on the 540 1.257 apb server in this way, then "cvs update" reports this error. 541 1.257 apb Fix: Recursively delete the affected directory from your working tree 542 1.257 apb and try the update again. 543
Indexes created Sun Oct 12 09:09:55 GMT 2025