UPDATING revision 1.51
1 $NetBSD: UPDATING,v 1.51 2002/02/23 11:06:53 pooka Exp $ 2 3 This file is intended to be a brief introduction to the build 4 process and a reference on what to do if something doesn't work. 5 6 For a more detailed description see Makefile. 7 8 Recent changes: 9 ^^^^^^^^^^^^^^^ 10 20020118: 11 12 ntpd user/group has been added. Need to hand add this in or builds 13 will break as mtree aborts early. 14 15 Add the following into /etc/group: 16 17 ntpd:*:15: 18 19 and the following to /etc/master.passwd (via vipw): 20 21 ntpd:*:15:15::0:0:Ntpd pseudo-user:/var/chroot/ntpd:/sbin/nologin 22 23 20011207: 24 25 If you're attempting to build a snapshot on sparc64 and are getting 26 reloc errors from the toolchain groff binary this means your native 27 toolchain has some broken C++ bits. 28 29 To fix: 30 31 Build a new toolchain (i.e. build.sh -t) 32 Use the new toolchain to build and install natively (i.e. /usr/lib) 33 34 gnu/lib/libgcc 35 gnu/lib/libstdc++ 36 37 After this a snapshot will be able to be built. 38 39 20011201: 40 In order for a sparc64 build to work you must have a working awk. If 41 you've built and installed a system with the new toolchain up to this 42 point you do not have a working awk as it's abililty to do floating 43 point is broken. 44 45 To build: 46 47 remake and install gnu/lib/libgcc 48 remake and install gnu/usr.bin/gawk into /usr/bin (make sure it links 49 against the new libgcc.a) 50 51 20011128: 52 Kernel config information was changed to use defflag in 53 the various "files" files. Bug fixes to config(8) are 54 required in order for this to work properly. Make sure 55 to build and install in usr.sbin/config before attempting 56 to build a new kernel. 57 58 20011030: 59 libc/locale/wcstod.c now needs new lint(1). Update lint(1) 60 before building libc. 61 62 20011029: 63 The new document BUILDING.mdoc (view with nroff | more, or 64 see pre-generated .txt and .html versions) describes the build 65 procedure in great detail. BUILDING, and the USE_NEW_TOOLCHAIN 66 build process, are intended in the long run to replace this 67 manual update log. 68 69 Users building a USE_NEW_TOOLCHAIN system should read the 70 BUILDING document for caveats. Generally, BUILDING supersedes 71 UPDATING for these systems, as tool updating is taken care of 72 by the new build system. 73 74 20011028: 75 src/etc/Makefile now needs install to be able to handle 76 symlinks that point to nowhere. A bug in install that 77 prevented this was corrected. 78 79 Solution: update and reinstall usr.bin/xinstall 80 Better Solution: Use the new toolchain and it will just work 81 for you. 82 83 20011006: 84 /etc/mtree/NetBSD.dist has been updated to take advantage of 85 absolute path support added to mtree(8). Older mtree(8)s don't 86 understand the format. 87 88 Solution: update and reinstall usr.sbin/mtree 89 90 20011004: 91 Crunchgen has been updated to work via reach-over makefiles. Updating 92 is suggested before running a snapshot build 93 94 20010915: 95 The new "ubcperf" code committed by Chuck Silvers removed 96 a header file, uvm/uvm_vnode.h. There may be stale .depend 97 files that still reference this file. 98 99 Solution: "make cleandir && make dependall" in affected 100 directories. 101 102 20010803: 103 grep.info is now built from grep.texi using makeinfo. Since it 104 requires makeinfo v4.0, you need to install new texinfo before 105 building gnu/usr.bin/grep. To install new texinfo, please follow 106 the instruction described in 20010726 entry. 107 108 20010803: 109 (i386 only): i386 kernel now uses new instructions like 110 `fxsave' which old gas doesn't understand. To build the 111 kernel successfuly, you need to build and install new gas 112 (gnu/usr.bin/gas.new), or (temporarily) comment out 113 "options I686_CPU" from your kernel configuration until you 114 rebuilt your userland (and got a new gas). 115 116 20010731: 117 Bootloader update on ELF platforms. DDB in kernels from before 118 this will be unable to read symbol tables provided by newer 119 bootloaders. 120 121 20010726: 122 Texinfo was updated to 4.0. To avoid failures when trying to 123 build the included texinfo files, do: 124 125 cd src/gnu/usr.bin/texinfo 126 make MKINFO=no dependall install 127 128 20010718: 129 Enabled correct .init/.fini processing in crt0. The way this 130 was done was to change a -I directive to cc(1), which means 131 make(1) will have a stale dependency (it will be checking the 132 timestamp on the wrong "dot_init.h"). 133 134 The symptom you will see is that new programs die with SIGSEGV 135 if you have a stale dependency. 136 137 Solution: "make cleandir" in both lib/csu and libexec/ld.elf_so 138 before starting your build. 139 140 20010628: 141 A construct was added to uvm_page.h that uncovered a bug 142 in lint(1). If you get a warning/error about a non-portable 143 bitfield, update your lint(1) before proceeding. 144 145 20010226: 146 Added named user/group to system. Need to hand add this in or builds 147 will break as mtree aborts early. 148 149 To work around add by hand: 150 151 named:*:14: 152 153 to /etc/group and add: 154 155 named:*:14:14::0:0:Named pseudo-user:/var/named:/sbin/nologin 156 157 to master.passwd (use vipw for instance if doing by hand). 158 159 Now a make build should progress. 160 161 20010219: 162 get/setprogname() added. Any hostprog's that may use this will need 163 to be bootstrapped manually until the host system is current. 164 165 Known problems: sys/arch/macppc/stand/fixcoff 166 usr.sbin/config (adding -DMAKE_BOOTSTRAP to 167 CFLAGS and rebuilding should work) 168 usr.sbin/mdsetimage - Build a static copy if 169 building a snapshot before fully bootstrapped. 170 171 20010204: 172 prepare the code to compile with stricter gcc flags. in 173 particular start eliminating redundant declarations. Yacc 174 needs to be installed before make build. 175 176 20010114: 177 introduce .if commands(target) in make(1). You need to 178 bring everything up-to-date first, then without installing 179 anything make and install in usr.bin/make, then proceed 180 with make build. 181 182 20010101: 183 bsd.subdir.mk committed 20001230 had a bug which caused 184 afterinstall targets to run too soon; update again. 185 186 20001230: 187 New share/mk files needed to support .WAIT in SUBDIR variables. 188 If you get make errors, 189 (cd share/mk; make install) 190 Also, PRINTOBJDIR has changed and is now used more heavily. 191 192 20001019: 193 The `ca' device driver has been replaced by `ld'; although the 194 major and minor numbers haven't changed, you should update your /dev 195 directory. 196 197 20000929: 198 The following make directives are obsoleted. 199 MKCRYPTO_RSA NOCRYPTO_RSA NOCRYPTO_RC5 NOCRYPTO_IDEA 200 By default, RSA is built into libcrypto. IDEA and RC5 will not be 201 built into libcrypto. By using MKCRYPTO_{RC5,IDEA}, you can build 202 additional library libcrypto_{idea,rc5}. 203 204 205 Hints for a more successful build: 206 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 207 Build a new kernel first: 208 This makes sure that any new system calls or features 209 expected by the new userland will be present. This 210 helps to avoid critical errors when upgrading. 211 Use object directories: 212 This helps to keep stale object 213 files from polluting the build if a Makefile "forgets" 214 about one. It also makes it easier to clean up after 215 a build. It's also necessary if you want to use the 216 same source tree for multiple machines. 217 To use object directories: 218 a) cd /usr/src ; make cleandir 219 b) Add "OBJMACHINE=yes" to /etc/mk.conf 220 c) Add "MKOBJDIRS=yes" to /etc/mk.conf 221 d) cd /usr/src ; make build 222 Note that running "make obj" in a directory will create 223 in obj.$MACHINE directory. 224 Build to a DESTDIR: 225 This helps to keep old 226 installed files (especially libraries) from interfering 227 with the new build. 228 To build to a DESTDIR, set the DESTDIR environment 229 variable before running make build. It should be set to 230 the pathname of an initially empty directory. 231 Problems: you might need to update critical utilities 232 without using DESTDIR since nothing is executed 233 from what is installed in DESTDIR. 234 (See critical utils, below) 235 Build often: 236 This keeps critical utilities current enough to not choke 237 on any other part of the source tree that depends on up to 238 date functionality. 239 240 What to do if things don't work: 241 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 242 When things don't work there is usually a few things that commonly 243 should be done. 244 1) make includes 245 This should be done automatically by make build. 246 2) cd share/mk && make install 247 Again, automatically done by make build. 248 249 Failsafe rebuild of a small part of the tree: 250 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 251 To make sure you rebuild something correctly you want to do 252 something like the following: 253 1) Make sure the includes and .mk files are up to date. 254 2) Make sure any program used to build the particular 255 utility is up to date. (yacc, lex, etc...) 256 3) cd ...path/to/util... 257 make cleandir 258 rm ...all obj directories... 259 make cleandir # yes, again 260 make obj 261 make depend && make 262 263 Failsafe rebuild of the entire tree: 264 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 265 If you really want to make sure the source tree is clean and 266 ready for a build try the following. Note that sourcing /etc/mk.conf 267 (a make(1) Makefile) in this manner is not right, and will not work 268 for anyone who uses any make(1) features in /etc/mk.conf. 269 270 ---cut here--- 271 #!/bin/sh 272 . /etc/mk.conf 273 274 if [ -z $BSDSRCDIR ] ; then 275 BSDSRCDIR=/usr/src 276 fi 277 if [ \! -d $BSDSRCDIR ] ; then 278 echo Unable to find sources 279 exit 1 280 fi 281 find $BSDSRCDIR -name \*.o -o -name obj.\* -o -name obj -exec rm \{\} \; 282 283 if [ -z $BSDOBJDIR ] ; then 284 BSDOBJDIR=/usr/obj 285 fi 286 if [ -d $BSDOBJDIR ] ; then 287 rm -rf $BSDOBJDIR 288 fi 289 290 cd $BSDSRCDIR && make cleandir 291 292 ---cut here--- 293 294 Critical utilities: 295 ^^^^^^^^^^^^^^^^^^^ 296 gnu/usr.bin/egcs 297 usr.bin/compile_et 298 usr.bin/make 299 usr.bin/yacc 300 usr.bin/lex 301 usr.bin/xlint 302 usr.sbin/config 303 304 Other problems and possible solutions: 305 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 306 Symptom:Unreasonable compiler errors. 307 Fix: Rebuild gnu/usr.bin/egcs 308 309 Symptom:Complaints involving a Makefile. 310 Fix: Rebuild usr.bin/make: 311 cd usr.bin/make && make && make install 312 Or, a failsafe method if that doesn't work: 313 cd usr.bin/make && cc *.c */*.c -I . -o make && mv make /usr/bin 314 315 Fix: Make sure .mk files are up to date. 316 cd share/mk && make install 317 318 Symptom:Kernel `config' fails to configure any kernel, including GENERIC. 319 Fix: Rebuild usr.sbin/config 320 321 Symptom: 322 Fix: Rebuild usr.bin/yacc 323 324 Symptom: 325 Fix: Rebuild usr.bin/lex 326 327 Symptom: 328 Fix: rm /usr/lib/libbfd.a 329 330 Symptom:Obsolete intermediate files are used during compilation 331 Fix: Try the following sequence of commands in the directory in question. 332 make cleandir; rm `make print-objdir`; make cleandir; make obj 333 (If you built the tree without "make obj" in the past, obsolete files 334 may remain. The command tries to clean everything up) 335 336 Symptom:.../sysinst/run.c:xx: warning: initialization from incompatible pointer type 337 Fix: Rebuild and install usr.bin/menuc 338 339 Symptom:mklocale not found during build in share/locale/ctype 340 Fix: Build and install usr.bin/mklocale 341 342 Symptom:undefined reference to `__assert13' 343 Fix: Rebuild and install lib/libc 344 345 Symptom:usr.sbin/config fails to build. 346 Fix: Try building with -DMAKE_BOOTSTRAP added to CFLAGS in Makefile. 347 348 Symptom:undefined reference to `getprogname' or `setprogname' 349 Fix: Rebuild and install lib/libc 350 351 Symptom:lint does not understand the '-X' option 352 Fix: May need to build & install libs with NOLINT=1 before rebuilding lint 353
Indexes created Sun Oct 12 05:10:08 GMT 2025