moduli.c revision 1.1.1.8 1 /* $OpenBSD: moduli.c,v 1.31 2016/09/12 01:22:38 deraadt Exp $ */
2 /*
3 * Copyright 1994 Phil Karn <karn (at) qualcomm.com>
4 * Copyright 1996-1998, 2003 William Allen Simpson <wsimpson (at) greendragon.com>
5 * Copyright 2000 Niels Provos <provos (at) citi.umich.edu>
6 * All rights reserved.
7 *
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
10 * are met:
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29 /*
30 * Two-step process to generate safe primes for DHGEX
31 *
32 * Sieve candidates for "safe" primes,
33 * suitable for use as Diffie-Hellman moduli;
34 * that is, where q = (p-1)/2 is also prime.
35 *
36 * First step: generate candidate primes (memory intensive)
37 * Second step: test primes' safety (processor intensive)
38 */
39
40 #include <sys/types.h>
41
42 #include <openssl/bn.h>
43 #include <openssl/dh.h>
44
45 #include <errno.h>
46 #include <stdio.h>
47 #include <stdlib.h>
48 #include <string.h>
49 #include <stdarg.h>
50 #include <time.h>
51 #include <unistd.h>
52 #include <limits.h>
53
54 #include "xmalloc.h"
55 #include "dh.h"
56 #include "log.h"
57 #include "misc.h"
58
59 /*
60 * File output defines
61 */
62
63 /* need line long enough for largest moduli plus headers */
64 #define QLINESIZE (100+8192)
65
66 /*
67 * Size: decimal.
68 * Specifies the number of the most significant bit (0 to M).
69 * WARNING: internally, usually 1 to N.
70 */
71 #define QSIZE_MINIMUM (511)
72
73 /*
74 * Prime sieving defines
75 */
76
77 /* Constant: assuming 8 bit bytes and 32 bit words */
78 #define SHIFT_BIT (3)
79 #define SHIFT_BYTE (2)
80 #define SHIFT_WORD (SHIFT_BIT+SHIFT_BYTE)
81 #define SHIFT_MEGABYTE (20)
82 #define SHIFT_MEGAWORD (SHIFT_MEGABYTE-SHIFT_BYTE)
83
84 /*
85 * Using virtual memory can cause thrashing. This should be the largest
86 * number that is supported without a large amount of disk activity --
87 * that would increase the run time from hours to days or weeks!
88 */
89 #define LARGE_MINIMUM (8UL) /* megabytes */
90
91 /*
92 * Do not increase this number beyond the unsigned integer bit size.
93 * Due to a multiple of 4, it must be LESS than 128 (yielding 2**30 bits).
94 */
95 #define LARGE_MAXIMUM (127UL) /* megabytes */
96
97 /*
98 * Constant: when used with 32-bit integers, the largest sieve prime
99 * has to be less than 2**32.
100 */
101 #define SMALL_MAXIMUM (0xffffffffUL)
102
103 /* Constant: can sieve all primes less than 2**32, as 65537**2 > 2**32-1. */
104 #define TINY_NUMBER (1UL<<16)
105
106 /* Ensure enough bit space for testing 2*q. */
107 #define TEST_MAXIMUM (1UL<<16)
108 #define TEST_MINIMUM (QSIZE_MINIMUM + 1)
109 /* real TEST_MINIMUM (1UL << (SHIFT_WORD - TEST_POWER)) */
110 #define TEST_POWER (3) /* 2**n, n < SHIFT_WORD */
111
112 /* bit operations on 32-bit words */
113 #define BIT_CLEAR(a,n) ((a)[(n)>>SHIFT_WORD] &= ~(1L << ((n) & 31)))
114 #define BIT_SET(a,n) ((a)[(n)>>SHIFT_WORD] |= (1L << ((n) & 31)))
115 #define BIT_TEST(a,n) ((a)[(n)>>SHIFT_WORD] & (1L << ((n) & 31)))
116
117 /*
118 * Prime testing defines
119 */
120
121 /* Minimum number of primality tests to perform */
122 #define TRIAL_MINIMUM (4)
123
124 /*
125 * Sieving data (XXX - move to struct)
126 */
127
128 /* sieve 2**16 */
129 static u_int32_t *TinySieve, tinybits;
130
131 /* sieve 2**30 in 2**16 parts */
132 static u_int32_t *SmallSieve, smallbits, smallbase;
133
134 /* sieve relative to the initial value */
135 static u_int32_t *LargeSieve, largewords, largetries, largenumbers;
136 static u_int32_t largebits, largememory; /* megabytes */
137 static BIGNUM *largebase;
138
139 int gen_candidates(FILE *, u_int32_t, u_int32_t, BIGNUM *);
140 int prime_test(FILE *, FILE *, u_int32_t, u_int32_t, char *, unsigned long,
141 unsigned long);
142
143 /*
144 * print moduli out in consistent form,
145 */
146 static int
147 qfileout(FILE * ofile, u_int32_t otype, u_int32_t otests, u_int32_t otries,
148 u_int32_t osize, u_int32_t ogenerator, BIGNUM * omodulus)
149 {
150 struct tm *gtm;
151 time_t time_now;
152 int res;
153
154 time(&time_now);
155 gtm = gmtime(&time_now);
156
157 res = fprintf(ofile, "%04d%02d%02d%02d%02d%02d %u %u %u %u %x ",
158 gtm->tm_year + 1900, gtm->tm_mon + 1, gtm->tm_mday,
159 gtm->tm_hour, gtm->tm_min, gtm->tm_sec,
160 otype, otests, otries, osize, ogenerator);
161
162 if (res < 0)
163 return (-1);
164
165 if (BN_print_fp(ofile, omodulus) < 1)
166 return (-1);
167
168 res = fprintf(ofile, "\n");
169 fflush(ofile);
170
171 return (res > 0 ? 0 : -1);
172 }
173
174
175 /*
176 ** Sieve p's and q's with small factors
177 */
178 static void
179 sieve_large(u_int32_t s)
180 {
181 u_int32_t r, u;
182
183 debug3("sieve_large %u", s);
184 largetries++;
185 /* r = largebase mod s */
186 r = BN_mod_word(largebase, s);
187 if (r == 0)
188 u = 0; /* s divides into largebase exactly */
189 else
190 u = s - r; /* largebase+u is first entry divisible by s */
191
192 if (u < largebits * 2) {
193 /*
194 * The sieve omits p's and q's divisible by 2, so ensure that
195 * largebase+u is odd. Then, step through the sieve in
196 * increments of 2*s
197 */
198 if (u & 0x1)
199 u += s; /* Make largebase+u odd, and u even */
200
201 /* Mark all multiples of 2*s */
202 for (u /= 2; u < largebits; u += s)
203 BIT_SET(LargeSieve, u);
204 }
205
206 /* r = p mod s */
207 r = (2 * r + 1) % s;
208 if (r == 0)
209 u = 0; /* s divides p exactly */
210 else
211 u = s - r; /* p+u is first entry divisible by s */
212
213 if (u < largebits * 4) {
214 /*
215 * The sieve omits p's divisible by 4, so ensure that
216 * largebase+u is not. Then, step through the sieve in
217 * increments of 4*s
218 */
219 while (u & 0x3) {
220 if (SMALL_MAXIMUM - u < s)
221 return;
222 u += s;
223 }
224
225 /* Mark all multiples of 4*s */
226 for (u /= 4; u < largebits; u += s)
227 BIT_SET(LargeSieve, u);
228 }
229 }
230
231 /*
232 * list candidates for Sophie-Germain primes (where q = (p-1)/2)
233 * to standard output.
234 * The list is checked against small known primes (less than 2**30).
235 */
236 int
237 gen_candidates(FILE *out, u_int32_t memory, u_int32_t power, BIGNUM *start)
238 {
239 BIGNUM *q;
240 u_int32_t j, r, s, t;
241 u_int32_t smallwords = TINY_NUMBER >> 6;
242 u_int32_t tinywords = TINY_NUMBER >> 6;
243 time_t time_start, time_stop;
244 u_int32_t i;
245 int ret = 0;
246
247 largememory = memory;
248
249 if (memory != 0 &&
250 (memory < LARGE_MINIMUM || memory > LARGE_MAXIMUM)) {
251 error("Invalid memory amount (min %ld, max %ld)",
252 LARGE_MINIMUM, LARGE_MAXIMUM);
253 return (-1);
254 }
255
256 /*
257 * Set power to the length in bits of the prime to be generated.
258 * This is changed to 1 less than the desired safe prime moduli p.
259 */
260 if (power > TEST_MAXIMUM) {
261 error("Too many bits: %u > %lu", power, TEST_MAXIMUM);
262 return (-1);
263 } else if (power < TEST_MINIMUM) {
264 error("Too few bits: %u < %u", power, TEST_MINIMUM);
265 return (-1);
266 }
267 power--; /* decrement before squaring */
268
269 /*
270 * The density of ordinary primes is on the order of 1/bits, so the
271 * density of safe primes should be about (1/bits)**2. Set test range
272 * to something well above bits**2 to be reasonably sure (but not
273 * guaranteed) of catching at least one safe prime.
274 */
275 largewords = ((power * power) >> (SHIFT_WORD - TEST_POWER));
276
277 /*
278 * Need idea of how much memory is available. We don't have to use all
279 * of it.
280 */
281 if (largememory > LARGE_MAXIMUM) {
282 logit("Limited memory: %u MB; limit %lu MB",
283 largememory, LARGE_MAXIMUM);
284 largememory = LARGE_MAXIMUM;
285 }
286
287 if (largewords <= (largememory << SHIFT_MEGAWORD)) {
288 logit("Increased memory: %u MB; need %u bytes",
289 largememory, (largewords << SHIFT_BYTE));
290 largewords = (largememory << SHIFT_MEGAWORD);
291 } else if (largememory > 0) {
292 logit("Decreased memory: %u MB; want %u bytes",
293 largememory, (largewords << SHIFT_BYTE));
294 largewords = (largememory << SHIFT_MEGAWORD);
295 }
296
297 TinySieve = xcalloc(tinywords, sizeof(u_int32_t));
298 tinybits = tinywords << SHIFT_WORD;
299
300 SmallSieve = xcalloc(smallwords, sizeof(u_int32_t));
301 smallbits = smallwords << SHIFT_WORD;
302
303 /*
304 * dynamically determine available memory
305 */
306 while ((LargeSieve = calloc(largewords, sizeof(u_int32_t))) == NULL)
307 largewords -= (1L << (SHIFT_MEGAWORD - 2)); /* 1/4 MB chunks */
308
309 largebits = largewords << SHIFT_WORD;
310 largenumbers = largebits * 2; /* even numbers excluded */
311
312 /* validation check: count the number of primes tried */
313 largetries = 0;
314 if ((q = BN_new()) == NULL)
315 fatal("BN_new failed");
316
317 /*
318 * Generate random starting point for subprime search, or use
319 * specified parameter.
320 */
321 if ((largebase = BN_new()) == NULL)
322 fatal("BN_new failed");
323 if (start == NULL) {
324 if (BN_rand(largebase, power, 1, 1) == 0)
325 fatal("BN_rand failed");
326 } else {
327 if (BN_copy(largebase, start) == NULL)
328 fatal("BN_copy: failed");
329 }
330
331 /* ensure odd */
332 if (BN_set_bit(largebase, 0) == 0)
333 fatal("BN_set_bit: failed");
334
335 time(&time_start);
336
337 logit("%.24s Sieve next %u plus %u-bit", ctime(&time_start),
338 largenumbers, power);
339 debug2("start point: 0x%s", BN_bn2hex(largebase));
340
341 /*
342 * TinySieve
343 */
344 for (i = 0; i < tinybits; i++) {
345 if (BIT_TEST(TinySieve, i))
346 continue; /* 2*i+3 is composite */
347
348 /* The next tiny prime */
349 t = 2 * i + 3;
350
351 /* Mark all multiples of t */
352 for (j = i + t; j < tinybits; j += t)
353 BIT_SET(TinySieve, j);
354
355 sieve_large(t);
356 }
357
358 /*
359 * Start the small block search at the next possible prime. To avoid
360 * fencepost errors, the last pass is skipped.
361 */
362 for (smallbase = TINY_NUMBER + 3;
363 smallbase < (SMALL_MAXIMUM - TINY_NUMBER);
364 smallbase += TINY_NUMBER) {
365 for (i = 0; i < tinybits; i++) {
366 if (BIT_TEST(TinySieve, i))
367 continue; /* 2*i+3 is composite */
368
369 /* The next tiny prime */
370 t = 2 * i + 3;
371 r = smallbase % t;
372
373 if (r == 0) {
374 s = 0; /* t divides into smallbase exactly */
375 } else {
376 /* smallbase+s is first entry divisible by t */
377 s = t - r;
378 }
379
380 /*
381 * The sieve omits even numbers, so ensure that
382 * smallbase+s is odd. Then, step through the sieve
383 * in increments of 2*t
384 */
385 if (s & 1)
386 s += t; /* Make smallbase+s odd, and s even */
387
388 /* Mark all multiples of 2*t */
389 for (s /= 2; s < smallbits; s += t)
390 BIT_SET(SmallSieve, s);
391 }
392
393 /*
394 * SmallSieve
395 */
396 for (i = 0; i < smallbits; i++) {
397 if (BIT_TEST(SmallSieve, i))
398 continue; /* 2*i+smallbase is composite */
399
400 /* The next small prime */
401 sieve_large((2 * i) + smallbase);
402 }
403
404 memset(SmallSieve, 0, smallwords << SHIFT_BYTE);
405 }
406
407 time(&time_stop);
408
409 logit("%.24s Sieved with %u small primes in %ld seconds",
410 ctime(&time_stop), largetries, (long) (time_stop - time_start));
411
412 for (j = r = 0; j < largebits; j++) {
413 if (BIT_TEST(LargeSieve, j))
414 continue; /* Definitely composite, skip */
415
416 debug2("test q = largebase+%u", 2 * j);
417 if (BN_set_word(q, 2 * j) == 0)
418 fatal("BN_set_word failed");
419 if (BN_add(q, q, largebase) == 0)
420 fatal("BN_add failed");
421 if (qfileout(out, MODULI_TYPE_SOPHIE_GERMAIN,
422 MODULI_TESTS_SIEVE, largetries,
423 (power - 1) /* MSB */, (0), q) == -1) {
424 ret = -1;
425 break;
426 }
427
428 r++; /* count q */
429 }
430
431 time(&time_stop);
432
433 free(LargeSieve);
434 free(SmallSieve);
435 free(TinySieve);
436
437 logit("%.24s Found %u candidates", ctime(&time_stop), r);
438
439 return (ret);
440 }
441
442 static void
443 write_checkpoint(char *cpfile, u_int32_t lineno)
444 {
445 FILE *fp;
446 char tmp[PATH_MAX];
447 int r;
448
449 r = snprintf(tmp, sizeof(tmp), "%s.XXXXXXXXXX", cpfile);
450 if (r == -1 || r >= PATH_MAX) {
451 logit("write_checkpoint: temp pathname too long");
452 return;
453 }
454 if ((r = mkstemp(tmp)) == -1) {
455 logit("mkstemp(%s): %s", tmp, strerror(errno));
456 return;
457 }
458 if ((fp = fdopen(r, "w")) == NULL) {
459 logit("write_checkpoint: fdopen: %s", strerror(errno));
460 unlink(tmp);
461 close(r);
462 return;
463 }
464 if (fprintf(fp, "%lu\n", (unsigned long)lineno) > 0 && fclose(fp) == 0
465 && rename(tmp, cpfile) == 0)
466 debug3("wrote checkpoint line %lu to '%s'",
467 (unsigned long)lineno, cpfile);
468 else
469 logit("failed to write to checkpoint file '%s': %s", cpfile,
470 strerror(errno));
471 }
472
473 static unsigned long
474 read_checkpoint(char *cpfile)
475 {
476 FILE *fp;
477 unsigned long lineno = 0;
478
479 if ((fp = fopen(cpfile, "r")) == NULL)
480 return 0;
481 if (fscanf(fp, "%lu\n", &lineno) < 1)
482 logit("Failed to load checkpoint from '%s'", cpfile);
483 else
484 logit("Loaded checkpoint from '%s' line %lu", cpfile, lineno);
485 fclose(fp);
486 return lineno;
487 }
488
489 static unsigned long
490 count_lines(FILE *f)
491 {
492 unsigned long count = 0;
493 char lp[QLINESIZE + 1];
494
495 if (fseek(f, 0, SEEK_SET) != 0) {
496 debug("input file is not seekable");
497 return ULONG_MAX;
498 }
499 while (fgets(lp, QLINESIZE + 1, f) != NULL)
500 count++;
501 rewind(f);
502 debug("input file has %lu lines", count);
503 return count;
504 }
505
506 static char *
507 fmt_time(time_t seconds)
508 {
509 int day, hr, min;
510 static char buf[128];
511
512 min = (seconds / 60) % 60;
513 hr = (seconds / 60 / 60) % 24;
514 day = seconds / 60 / 60 / 24;
515 if (day > 0)
516 snprintf(buf, sizeof buf, "%dd %d:%02d", day, hr, min);
517 else
518 snprintf(buf, sizeof buf, "%d:%02d", hr, min);
519 return buf;
520 }
521
522 static void
523 print_progress(unsigned long start_lineno, unsigned long current_lineno,
524 unsigned long end_lineno)
525 {
526 static time_t time_start, time_prev;
527 time_t time_now, elapsed;
528 unsigned long num_to_process, processed, remaining, percent, eta;
529 double time_per_line;
530 char *eta_str;
531
532 time_now = monotime();
533 if (time_start == 0) {
534 time_start = time_prev = time_now;
535 return;
536 }
537 /* print progress after 1m then once per 5m */
538 if (time_now - time_prev < 5 * 60)
539 return;
540 time_prev = time_now;
541 elapsed = time_now - time_start;
542 processed = current_lineno - start_lineno;
543 remaining = end_lineno - current_lineno;
544 num_to_process = end_lineno - start_lineno;
545 time_per_line = (double)elapsed / processed;
546 /* if we don't know how many we're processing just report count+time */
547 time(&time_now);
548 if (end_lineno == ULONG_MAX) {
549 logit("%.24s processed %lu in %s", ctime(&time_now),
550 processed, fmt_time(elapsed));
551 return;
552 }
553 percent = 100 * processed / num_to_process;
554 eta = time_per_line * remaining;
555 eta_str = xstrdup(fmt_time(eta));
556 logit("%.24s processed %lu of %lu (%lu%%) in %s, ETA %s",
557 ctime(&time_now), processed, num_to_process, percent,
558 fmt_time(elapsed), eta_str);
559 free(eta_str);
560 }
561
562 /*
563 * perform a Miller-Rabin primality test
564 * on the list of candidates
565 * (checking both q and p)
566 * The result is a list of so-call "safe" primes
567 */
568 int
569 prime_test(FILE *in, FILE *out, u_int32_t trials, u_int32_t generator_wanted,
570 char *checkpoint_file, unsigned long start_lineno, unsigned long num_lines)
571 {
572 BIGNUM *q, *p, *a;
573 BN_CTX *ctx;
574 char *cp, *lp;
575 u_int32_t count_in = 0, count_out = 0, count_possible = 0;
576 u_int32_t generator_known, in_tests, in_tries, in_type, in_size;
577 unsigned long last_processed = 0, end_lineno;
578 time_t time_start, time_stop;
579 int res;
580
581 if (trials < TRIAL_MINIMUM) {
582 error("Minimum primality trials is %d", TRIAL_MINIMUM);
583 return (-1);
584 }
585
586 if (num_lines == 0)
587 end_lineno = count_lines(in);
588 else
589 end_lineno = start_lineno + num_lines;
590
591 time(&time_start);
592
593 if ((p = BN_new()) == NULL)
594 fatal("BN_new failed");
595 if ((q = BN_new()) == NULL)
596 fatal("BN_new failed");
597 if ((ctx = BN_CTX_new()) == NULL)
598 fatal("BN_CTX_new failed");
599
600 debug2("%.24s Final %u Miller-Rabin trials (%x generator)",
601 ctime(&time_start), trials, generator_wanted);
602
603 if (checkpoint_file != NULL)
604 last_processed = read_checkpoint(checkpoint_file);
605 last_processed = start_lineno = MAXIMUM(last_processed, start_lineno);
606 if (end_lineno == ULONG_MAX)
607 debug("process from line %lu from pipe", last_processed);
608 else
609 debug("process from line %lu to line %lu", last_processed,
610 end_lineno);
611
612 res = 0;
613 lp = xmalloc(QLINESIZE + 1);
614 while (fgets(lp, QLINESIZE + 1, in) != NULL && count_in < end_lineno) {
615 count_in++;
616 if (count_in <= last_processed) {
617 debug3("skipping line %u, before checkpoint or "
618 "specified start line", count_in);
619 continue;
620 }
621 if (checkpoint_file != NULL)
622 write_checkpoint(checkpoint_file, count_in);
623 print_progress(start_lineno, count_in, end_lineno);
624 if (strlen(lp) < 14 || *lp == '!' || *lp == '#') {
625 debug2("%10u: comment or short line", count_in);
626 continue;
627 }
628
629 /* XXX - fragile parser */
630 /* time */
631 cp = &lp[14]; /* (skip) */
632
633 /* type */
634 in_type = strtoul(cp, &cp, 10);
635
636 /* tests */
637 in_tests = strtoul(cp, &cp, 10);
638
639 if (in_tests & MODULI_TESTS_COMPOSITE) {
640 debug2("%10u: known composite", count_in);
641 continue;
642 }
643
644 /* tries */
645 in_tries = strtoul(cp, &cp, 10);
646
647 /* size (most significant bit) */
648 in_size = strtoul(cp, &cp, 10);
649
650 /* generator (hex) */
651 generator_known = strtoul(cp, &cp, 16);
652
653 /* Skip white space */
654 cp += strspn(cp, " ");
655
656 /* modulus (hex) */
657 switch (in_type) {
658 case MODULI_TYPE_SOPHIE_GERMAIN:
659 debug2("%10u: (%u) Sophie-Germain", count_in, in_type);
660 a = q;
661 if (BN_hex2bn(&a, cp) == 0)
662 fatal("BN_hex2bn failed");
663 /* p = 2*q + 1 */
664 if (BN_lshift(p, q, 1) == 0)
665 fatal("BN_lshift failed");
666 if (BN_add_word(p, 1) == 0)
667 fatal("BN_add_word failed");
668 in_size += 1;
669 generator_known = 0;
670 break;
671 case MODULI_TYPE_UNSTRUCTURED:
672 case MODULI_TYPE_SAFE:
673 case MODULI_TYPE_SCHNORR:
674 case MODULI_TYPE_STRONG:
675 case MODULI_TYPE_UNKNOWN:
676 debug2("%10u: (%u)", count_in, in_type);
677 a = p;
678 if (BN_hex2bn(&a, cp) == 0)
679 fatal("BN_hex2bn failed");
680 /* q = (p-1) / 2 */
681 if (BN_rshift(q, p, 1) == 0)
682 fatal("BN_rshift failed");
683 break;
684 default:
685 debug2("Unknown prime type");
686 break;
687 }
688
689 /*
690 * due to earlier inconsistencies in interpretation, check
691 * the proposed bit size.
692 */
693 if ((u_int32_t)BN_num_bits(p) != (in_size + 1)) {
694 debug2("%10u: bit size %u mismatch", count_in, in_size);
695 continue;
696 }
697 if (in_size < QSIZE_MINIMUM) {
698 debug2("%10u: bit size %u too short", count_in, in_size);
699 continue;
700 }
701
702 if (in_tests & MODULI_TESTS_MILLER_RABIN)
703 in_tries += trials;
704 else
705 in_tries = trials;
706
707 /*
708 * guess unknown generator
709 */
710 if (generator_known == 0) {
711 if (BN_mod_word(p, 24) == 11)
712 generator_known = 2;
713 else if (BN_mod_word(p, 12) == 5)
714 generator_known = 3;
715 else {
716 u_int32_t r = BN_mod_word(p, 10);
717
718 if (r == 3 || r == 7)
719 generator_known = 5;
720 }
721 }
722 /*
723 * skip tests when desired generator doesn't match
724 */
725 if (generator_wanted > 0 &&
726 generator_wanted != generator_known) {
727 debug2("%10u: generator %d != %d",
728 count_in, generator_known, generator_wanted);
729 continue;
730 }
731
732 /*
733 * Primes with no known generator are useless for DH, so
734 * skip those.
735 */
736 if (generator_known == 0) {
737 debug2("%10u: no known generator", count_in);
738 continue;
739 }
740
741 count_possible++;
742
743 /*
744 * The (1/4)^N performance bound on Miller-Rabin is
745 * extremely pessimistic, so don't spend a lot of time
746 * really verifying that q is prime until after we know
747 * that p is also prime. A single pass will weed out the
748 * vast majority of composite q's.
749 */
750 if (BN_is_prime_ex(q, 1, ctx, NULL) <= 0) {
751 debug("%10u: q failed first possible prime test",
752 count_in);
753 continue;
754 }
755
756 /*
757 * q is possibly prime, so go ahead and really make sure
758 * that p is prime. If it is, then we can go back and do
759 * the same for q. If p is composite, chances are that
760 * will show up on the first Rabin-Miller iteration so it
761 * doesn't hurt to specify a high iteration count.
762 */
763 if (!BN_is_prime_ex(p, trials, ctx, NULL)) {
764 debug("%10u: p is not prime", count_in);
765 continue;
766 }
767 debug("%10u: p is almost certainly prime", count_in);
768
769 /* recheck q more rigorously */
770 if (!BN_is_prime_ex(q, trials - 1, ctx, NULL)) {
771 debug("%10u: q is not prime", count_in);
772 continue;
773 }
774 debug("%10u: q is almost certainly prime", count_in);
775
776 if (qfileout(out, MODULI_TYPE_SAFE,
777 in_tests | MODULI_TESTS_MILLER_RABIN,
778 in_tries, in_size, generator_known, p)) {
779 res = -1;
780 break;
781 }
782
783 count_out++;
784 }
785
786 time(&time_stop);
787 free(lp);
788 BN_free(p);
789 BN_free(q);
790 BN_CTX_free(ctx);
791
792 if (checkpoint_file != NULL)
793 unlink(checkpoint_file);
794
795 logit("%.24s Found %u safe primes of %u candidates in %ld seconds",
796 ctime(&time_stop), count_out, count_possible,
797 (long) (time_stop - time_start));
798
799 return (res);
800 }
801