session.c revision 1.1.1.11 1 /* $OpenBSD: session.c,v 1.278 2015/04/24 01:36:00 deraadt Exp $ */
2 /*
3 * Copyright (c) 1995 Tatu Ylonen <ylo (at) cs.hut.fi>, Espoo, Finland
4 * All rights reserved
5 *
6 * As far as I am concerned, the code I have written for this software
7 * can be used freely for any purpose. Any derived versions of this
8 * software must be clearly marked as such, and if the derived work is
9 * incompatible with the protocol description in the RFC file, it must be
10 * called by a name other than "ssh" or "Secure Shell".
11 *
12 * SSH2 support by Markus Friedl.
13 * Copyright (c) 2000, 2001 Markus Friedl. All rights reserved.
14 *
15 * Redistribution and use in source and binary forms, with or without
16 * modification, are permitted provided that the following conditions
17 * are met:
18 * 1. Redistributions of source code must retain the above copyright
19 * notice, this list of conditions and the following disclaimer.
20 * 2. Redistributions in binary form must reproduce the above copyright
21 * notice, this list of conditions and the following disclaimer in the
22 * documentation and/or other materials provided with the distribution.
23 *
24 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
25 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
26 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
27 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
28 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
29 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
30 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
31 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
32 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
33 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
34 */
35
36 #include <sys/types.h>
37 #include <sys/wait.h>
38 #include <sys/un.h>
39 #include <sys/stat.h>
40 #include <sys/socket.h>
41 #include <sys/queue.h>
42
43 #include <errno.h>
44 #include <fcntl.h>
45 #include <grp.h>
46 #include <login_cap.h>
47 #include <netdb.h>
48 #include <paths.h>
49 #include <pwd.h>
50 #include <signal.h>
51 #include <stdio.h>
52 #include <stdlib.h>
53 #include <string.h>
54 #include <unistd.h>
55 #include <limits.h>
56
57 #include "xmalloc.h"
58 #include "ssh.h"
59 #include "ssh1.h"
60 #include "ssh2.h"
61 #include "sshpty.h"
62 #include "packet.h"
63 #include "buffer.h"
64 #include "match.h"
65 #include "uidswap.h"
66 #include "compat.h"
67 #include "channels.h"
68 #include "key.h"
69 #include "cipher.h"
70 #include "kex.h"
71 #include "hostfile.h"
72 #include "auth.h"
73 #include "auth-options.h"
74 #include "authfd.h"
75 #include "pathnames.h"
76 #include "log.h"
77 #include "misc.h"
78 #include "servconf.h"
79 #include "sshlogin.h"
80 #include "serverloop.h"
81 #include "canohost.h"
82 #include "session.h"
83 #ifdef GSSAPI
84 #include "ssh-gss.h"
85 #endif
86 #include "monitor_wrap.h"
87 #include "sftp.h"
88
89 #ifdef KRB5
90 #include <kafs.h>
91 #endif
92
93 #define IS_INTERNAL_SFTP(c) \
94 (!strncmp(c, INTERNAL_SFTP_NAME, sizeof(INTERNAL_SFTP_NAME) - 1) && \
95 (c[sizeof(INTERNAL_SFTP_NAME) - 1] == '\0' || \
96 c[sizeof(INTERNAL_SFTP_NAME) - 1] == ' ' || \
97 c[sizeof(INTERNAL_SFTP_NAME) - 1] == '\t'))
98
99 /* func */
100
101 Session *session_new(void);
102 void session_set_fds(Session *, int, int, int, int, int);
103 void session_pty_cleanup(Session *);
104 void session_proctitle(Session *);
105 int session_setup_x11fwd(Session *);
106 int do_exec_pty(Session *, const char *);
107 int do_exec_no_pty(Session *, const char *);
108 int do_exec(Session *, const char *);
109 void do_login(Session *, const char *);
110 void do_child(Session *, const char *);
111 void do_motd(void);
112 int check_quietlogin(Session *, const char *);
113
114 static void do_authenticated1(Authctxt *);
115 static void do_authenticated2(Authctxt *);
116
117 static int session_pty_req(Session *);
118
119 /* import */
120 extern ServerOptions options;
121 extern char *__progname;
122 extern int log_stderr;
123 extern int debug_flag;
124 extern u_int utmp_len;
125 extern int startup_pipe;
126 extern void destroy_sensitive_data(void);
127 extern Buffer loginmsg;
128
129 /* original command from peer. */
130 const char *original_command = NULL;
131
132 /* data */
133 static int sessions_first_unused = -1;
134 static int sessions_nalloc = 0;
135 static Session *sessions = NULL;
136
137 #define SUBSYSTEM_NONE 0
138 #define SUBSYSTEM_EXT 1
139 #define SUBSYSTEM_INT_SFTP 2
140 #define SUBSYSTEM_INT_SFTP_ERROR 3
141
142 login_cap_t *lc;
143
144 static int is_child = 0;
145
146 /* Name and directory of socket for authentication agent forwarding. */
147 static char *auth_sock_name = NULL;
148 static char *auth_sock_dir = NULL;
149
150 /* removes the agent forwarding socket */
151
152 static void
153 auth_sock_cleanup_proc(struct passwd *pw)
154 {
155 if (auth_sock_name != NULL) {
156 temporarily_use_uid(pw);
157 unlink(auth_sock_name);
158 rmdir(auth_sock_dir);
159 auth_sock_name = NULL;
160 restore_uid();
161 }
162 }
163
164 static int
165 auth_input_request_forwarding(struct passwd * pw)
166 {
167 Channel *nc;
168 int sock = -1;
169
170 if (auth_sock_name != NULL) {
171 error("authentication forwarding requested twice.");
172 return 0;
173 }
174
175 /* Temporarily drop privileged uid for mkdir/bind. */
176 temporarily_use_uid(pw);
177
178 /* Allocate a buffer for the socket name, and format the name. */
179 auth_sock_dir = xstrdup("/tmp/ssh-XXXXXXXXXX");
180
181 /* Create private directory for socket */
182 if (mkdtemp(auth_sock_dir) == NULL) {
183 packet_send_debug("Agent forwarding disabled: "
184 "mkdtemp() failed: %.100s", strerror(errno));
185 restore_uid();
186 free(auth_sock_dir);
187 auth_sock_dir = NULL;
188 goto authsock_err;
189 }
190
191 xasprintf(&auth_sock_name, "%s/agent.%ld",
192 auth_sock_dir, (long) getpid());
193
194 /* Start a Unix listener on auth_sock_name. */
195 sock = unix_listener(auth_sock_name, SSH_LISTEN_BACKLOG, 0);
196
197 /* Restore the privileged uid. */
198 restore_uid();
199
200 /* Check for socket/bind/listen failure. */
201 if (sock < 0)
202 goto authsock_err;
203
204 /* Allocate a channel for the authentication agent socket. */
205 nc = channel_new("auth socket",
206 SSH_CHANNEL_AUTH_SOCKET, sock, sock, -1,
207 CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
208 0, "auth socket", 1);
209 nc->path = xstrdup(auth_sock_name);
210 return 1;
211
212 authsock_err:
213 free(auth_sock_name);
214 if (auth_sock_dir != NULL) {
215 rmdir(auth_sock_dir);
216 free(auth_sock_dir);
217 }
218 if (sock != -1)
219 close(sock);
220 auth_sock_name = NULL;
221 auth_sock_dir = NULL;
222 return 0;
223 }
224
225 static void
226 display_loginmsg(void)
227 {
228 if (buffer_len(&loginmsg) > 0) {
229 buffer_append(&loginmsg, "\0", 1);
230 printf("%s", (char *)buffer_ptr(&loginmsg));
231 buffer_clear(&loginmsg);
232 }
233 }
234
235 void
236 do_authenticated(Authctxt *authctxt)
237 {
238 setproctitle("%s", authctxt->pw->pw_name);
239
240 /* setup the channel layer */
241 /* XXX - streamlocal? */
242 if (no_port_forwarding_flag ||
243 (options.allow_tcp_forwarding & FORWARD_LOCAL) == 0)
244 channel_disable_adm_local_opens();
245 else
246 channel_permit_all_opens();
247
248 auth_debug_send();
249
250 if (compat20)
251 do_authenticated2(authctxt);
252 else
253 do_authenticated1(authctxt);
254
255 do_cleanup(authctxt);
256 }
257
258 /*
259 * Prepares for an interactive session. This is called after the user has
260 * been successfully authenticated. During this message exchange, pseudo
261 * terminals are allocated, X11, TCP/IP, and authentication agent forwardings
262 * are requested, etc.
263 */
264 static void
265 do_authenticated1(Authctxt *authctxt)
266 {
267 Session *s;
268 char *command;
269 int success, type, screen_flag;
270 int enable_compression_after_reply = 0;
271 u_int proto_len, data_len, dlen, compression_level = 0;
272
273 s = session_new();
274 if (s == NULL) {
275 error("no more sessions");
276 return;
277 }
278 s->authctxt = authctxt;
279 s->pw = authctxt->pw;
280
281 /*
282 * We stay in this loop until the client requests to execute a shell
283 * or a command.
284 */
285 for (;;) {
286 success = 0;
287
288 /* Get a packet from the client. */
289 type = packet_read();
290
291 /* Process the packet. */
292 switch (type) {
293 case SSH_CMSG_REQUEST_COMPRESSION:
294 compression_level = packet_get_int();
295 packet_check_eom();
296 if (compression_level < 1 || compression_level > 9) {
297 packet_send_debug("Received invalid compression level %d.",
298 compression_level);
299 break;
300 }
301 if (options.compression == COMP_NONE) {
302 debug2("compression disabled");
303 break;
304 }
305 /* Enable compression after we have responded with SUCCESS. */
306 enable_compression_after_reply = 1;
307 success = 1;
308 break;
309
310 case SSH_CMSG_REQUEST_PTY:
311 success = session_pty_req(s);
312 break;
313
314 case SSH_CMSG_X11_REQUEST_FORWARDING:
315 s->auth_proto = packet_get_string(&proto_len);
316 s->auth_data = packet_get_string(&data_len);
317
318 screen_flag = packet_get_protocol_flags() &
319 SSH_PROTOFLAG_SCREEN_NUMBER;
320 debug2("SSH_PROTOFLAG_SCREEN_NUMBER: %d", screen_flag);
321
322 if (packet_remaining() == 4) {
323 if (!screen_flag)
324 debug2("Buggy client: "
325 "X11 screen flag missing");
326 s->screen = packet_get_int();
327 } else {
328 s->screen = 0;
329 }
330 packet_check_eom();
331 success = session_setup_x11fwd(s);
332 if (!success) {
333 free(s->auth_proto);
334 free(s->auth_data);
335 s->auth_proto = NULL;
336 s->auth_data = NULL;
337 }
338 break;
339
340 case SSH_CMSG_AGENT_REQUEST_FORWARDING:
341 if (!options.allow_agent_forwarding ||
342 no_agent_forwarding_flag || compat13) {
343 debug("Authentication agent forwarding not permitted for this authentication.");
344 break;
345 }
346 debug("Received authentication agent forwarding request.");
347 success = auth_input_request_forwarding(s->pw);
348 break;
349
350 case SSH_CMSG_PORT_FORWARD_REQUEST:
351 if (no_port_forwarding_flag) {
352 debug("Port forwarding not permitted for this authentication.");
353 break;
354 }
355 if (!(options.allow_tcp_forwarding & FORWARD_REMOTE)) {
356 debug("Port forwarding not permitted.");
357 break;
358 }
359 debug("Received TCP/IP port forwarding request.");
360 if (channel_input_port_forward_request(s->pw->pw_uid == 0,
361 &options.fwd_opts) < 0) {
362 debug("Port forwarding failed.");
363 break;
364 }
365 success = 1;
366 break;
367
368 case SSH_CMSG_MAX_PACKET_SIZE:
369 if (packet_set_maxsize(packet_get_int()) > 0)
370 success = 1;
371 break;
372
373 case SSH_CMSG_EXEC_SHELL:
374 case SSH_CMSG_EXEC_CMD:
375 if (type == SSH_CMSG_EXEC_CMD) {
376 command = packet_get_string(&dlen);
377 debug("Exec command '%.500s'", command);
378 if (do_exec(s, command) != 0)
379 packet_disconnect(
380 "command execution failed");
381 free(command);
382 } else {
383 if (do_exec(s, NULL) != 0)
384 packet_disconnect(
385 "shell execution failed");
386 }
387 packet_check_eom();
388 session_close(s);
389 return;
390
391 default:
392 /*
393 * Any unknown messages in this phase are ignored,
394 * and a failure message is returned.
395 */
396 logit("Unknown packet type received after authentication: %d", type);
397 }
398 packet_start(success ? SSH_SMSG_SUCCESS : SSH_SMSG_FAILURE);
399 packet_send();
400 packet_write_wait();
401
402 /* Enable compression now that we have replied if appropriate. */
403 if (enable_compression_after_reply) {
404 enable_compression_after_reply = 0;
405 packet_start_compression(compression_level);
406 }
407 }
408 }
409
410 #define USE_PIPES 1
411 /*
412 * This is called to fork and execute a command when we have no tty. This
413 * will call do_child from the child, and server_loop from the parent after
414 * setting up file descriptors and such.
415 */
416 int
417 do_exec_no_pty(Session *s, const char *command)
418 {
419 pid_t pid;
420 #ifdef USE_PIPES
421 int pin[2], pout[2], perr[2];
422
423 if (s == NULL)
424 fatal("do_exec_no_pty: no session");
425
426 /* Allocate pipes for communicating with the program. */
427 if (pipe(pin) < 0) {
428 error("%s: pipe in: %.100s", __func__, strerror(errno));
429 return -1;
430 }
431 if (pipe(pout) < 0) {
432 error("%s: pipe out: %.100s", __func__, strerror(errno));
433 close(pin[0]);
434 close(pin[1]);
435 return -1;
436 }
437 if (pipe(perr) < 0) {
438 error("%s: pipe err: %.100s", __func__,
439 strerror(errno));
440 close(pin[0]);
441 close(pin[1]);
442 close(pout[0]);
443 close(pout[1]);
444 return -1;
445 }
446 #else
447 int inout[2], err[2];
448
449 if (s == NULL)
450 fatal("do_exec_no_pty: no session");
451
452 /* Uses socket pairs to communicate with the program. */
453 if (socketpair(AF_UNIX, SOCK_STREAM, 0, inout) < 0) {
454 error("%s: socketpair #1: %.100s", __func__, strerror(errno));
455 return -1;
456 }
457 if (socketpair(AF_UNIX, SOCK_STREAM, 0, err) < 0) {
458 error("%s: socketpair #2: %.100s", __func__,
459 strerror(errno));
460 close(inout[0]);
461 close(inout[1]);
462 return -1;
463 }
464 #endif
465
466 session_proctitle(s);
467
468 /* Fork the child. */
469 switch ((pid = fork())) {
470 case -1:
471 error("%s: fork: %.100s", __func__, strerror(errno));
472 #ifdef USE_PIPES
473 close(pin[0]);
474 close(pin[1]);
475 close(pout[0]);
476 close(pout[1]);
477 close(perr[0]);
478 close(perr[1]);
479 #else
480 close(inout[0]);
481 close(inout[1]);
482 close(err[0]);
483 close(err[1]);
484 #endif
485 return -1;
486 case 0:
487 is_child = 1;
488
489 /* Child. Reinitialize the log since the pid has changed. */
490 log_init(__progname, options.log_level,
491 options.log_facility, log_stderr);
492
493 /*
494 * Create a new session and process group since the 4.4BSD
495 * setlogin() affects the entire process group.
496 */
497 if (setsid() < 0)
498 error("setsid failed: %.100s", strerror(errno));
499
500 #ifdef USE_PIPES
501 /*
502 * Redirect stdin. We close the parent side of the socket
503 * pair, and make the child side the standard input.
504 */
505 close(pin[1]);
506 if (dup2(pin[0], 0) < 0)
507 perror("dup2 stdin");
508 close(pin[0]);
509
510 /* Redirect stdout. */
511 close(pout[0]);
512 if (dup2(pout[1], 1) < 0)
513 perror("dup2 stdout");
514 close(pout[1]);
515
516 /* Redirect stderr. */
517 close(perr[0]);
518 if (dup2(perr[1], 2) < 0)
519 perror("dup2 stderr");
520 close(perr[1]);
521 #else
522 /*
523 * Redirect stdin, stdout, and stderr. Stdin and stdout will
524 * use the same socket, as some programs (particularly rdist)
525 * seem to depend on it.
526 */
527 close(inout[1]);
528 close(err[1]);
529 if (dup2(inout[0], 0) < 0) /* stdin */
530 perror("dup2 stdin");
531 if (dup2(inout[0], 1) < 0) /* stdout (same as stdin) */
532 perror("dup2 stdout");
533 close(inout[0]);
534 if (dup2(err[0], 2) < 0) /* stderr */
535 perror("dup2 stderr");
536 close(err[0]);
537 #endif
538
539 /* Do processing for the child (exec command etc). */
540 do_child(s, command);
541 /* NOTREACHED */
542 default:
543 break;
544 }
545
546 s->pid = pid;
547 /* Set interactive/non-interactive mode. */
548 packet_set_interactive(s->display != NULL,
549 options.ip_qos_interactive, options.ip_qos_bulk);
550
551 #ifdef USE_PIPES
552 /* We are the parent. Close the child sides of the pipes. */
553 close(pin[0]);
554 close(pout[1]);
555 close(perr[1]);
556
557 if (compat20) {
558 session_set_fds(s, pin[1], pout[0], perr[0],
559 s->is_subsystem, 0);
560 } else {
561 /* Enter the interactive session. */
562 server_loop(pid, pin[1], pout[0], perr[0]);
563 /* server_loop has closed pin[1], pout[0], and perr[0]. */
564 }
565 #else
566 /* We are the parent. Close the child sides of the socket pairs. */
567 close(inout[0]);
568 close(err[0]);
569
570 /*
571 * Enter the interactive session. Note: server_loop must be able to
572 * handle the case that fdin and fdout are the same.
573 */
574 if (compat20) {
575 session_set_fds(s, inout[1], inout[1], err[1],
576 s->is_subsystem, 0);
577 } else {
578 server_loop(pid, inout[1], inout[1], err[1]);
579 /* server_loop has closed inout[1] and err[1]. */
580 }
581 #endif
582 return 0;
583 }
584
585 /*
586 * This is called to fork and execute a command when we have a tty. This
587 * will call do_child from the child, and server_loop from the parent after
588 * setting up file descriptors, controlling tty, updating wtmp, utmp,
589 * lastlog, and other such operations.
590 */
591 int
592 do_exec_pty(Session *s, const char *command)
593 {
594 int fdout, ptyfd, ttyfd, ptymaster;
595 pid_t pid;
596
597 if (s == NULL)
598 fatal("do_exec_pty: no session");
599 ptyfd = s->ptyfd;
600 ttyfd = s->ttyfd;
601
602 /*
603 * Create another descriptor of the pty master side for use as the
604 * standard input. We could use the original descriptor, but this
605 * simplifies code in server_loop. The descriptor is bidirectional.
606 * Do this before forking (and cleanup in the child) so as to
607 * detect and gracefully fail out-of-fd conditions.
608 */
609 if ((fdout = dup(ptyfd)) < 0) {
610 error("%s: dup #1: %s", __func__, strerror(errno));
611 close(ttyfd);
612 close(ptyfd);
613 return -1;
614 }
615 /* we keep a reference to the pty master */
616 if ((ptymaster = dup(ptyfd)) < 0) {
617 error("%s: dup #2: %s", __func__, strerror(errno));
618 close(ttyfd);
619 close(ptyfd);
620 close(fdout);
621 return -1;
622 }
623
624 /* Fork the child. */
625 switch ((pid = fork())) {
626 case -1:
627 error("%s: fork: %.100s", __func__, strerror(errno));
628 close(fdout);
629 close(ptymaster);
630 close(ttyfd);
631 close(ptyfd);
632 return -1;
633 case 0:
634 is_child = 1;
635
636 close(fdout);
637 close(ptymaster);
638
639 /* Child. Reinitialize the log because the pid has changed. */
640 log_init(__progname, options.log_level,
641 options.log_facility, log_stderr);
642 /* Close the master side of the pseudo tty. */
643 close(ptyfd);
644
645 /* Make the pseudo tty our controlling tty. */
646 pty_make_controlling_tty(&ttyfd, s->tty);
647
648 /* Redirect stdin/stdout/stderr from the pseudo tty. */
649 if (dup2(ttyfd, 0) < 0)
650 error("dup2 stdin: %s", strerror(errno));
651 if (dup2(ttyfd, 1) < 0)
652 error("dup2 stdout: %s", strerror(errno));
653 if (dup2(ttyfd, 2) < 0)
654 error("dup2 stderr: %s", strerror(errno));
655
656 /* Close the extra descriptor for the pseudo tty. */
657 close(ttyfd);
658
659 /* record login, etc. similar to login(1) */
660 if (!(options.use_login && command == NULL))
661 do_login(s, command);
662
663 /*
664 * Do common processing for the child, such as execing
665 * the command.
666 */
667 do_child(s, command);
668 /* NOTREACHED */
669 default:
670 break;
671 }
672 s->pid = pid;
673
674 /* Parent. Close the slave side of the pseudo tty. */
675 close(ttyfd);
676
677 /* Enter interactive session. */
678 s->ptymaster = ptymaster;
679 packet_set_interactive(1,
680 options.ip_qos_interactive, options.ip_qos_bulk);
681 if (compat20) {
682 session_set_fds(s, ptyfd, fdout, -1, 1, 1);
683 } else {
684 server_loop(pid, ptyfd, fdout, -1);
685 /* server_loop _has_ closed ptyfd and fdout. */
686 }
687 return 0;
688 }
689
690 /*
691 * This is called to fork and execute a command. If another command is
692 * to be forced, execute that instead.
693 */
694 int
695 do_exec(Session *s, const char *command)
696 {
697 int ret;
698 const char *forced = NULL;
699 char session_type[1024], *tty = NULL;
700
701 if (options.adm_forced_command) {
702 original_command = command;
703 command = options.adm_forced_command;
704 forced = "(config)";
705 } else if (forced_command) {
706 original_command = command;
707 command = forced_command;
708 forced = "(key-option)";
709 }
710 if (forced != NULL) {
711 if (IS_INTERNAL_SFTP(command)) {
712 s->is_subsystem = s->is_subsystem ?
713 SUBSYSTEM_INT_SFTP : SUBSYSTEM_INT_SFTP_ERROR;
714 } else if (s->is_subsystem)
715 s->is_subsystem = SUBSYSTEM_EXT;
716 snprintf(session_type, sizeof(session_type),
717 "forced-command %s '%.900s'", forced, command);
718 } else if (s->is_subsystem) {
719 snprintf(session_type, sizeof(session_type),
720 "subsystem '%.900s'", s->subsys);
721 } else if (command == NULL) {
722 snprintf(session_type, sizeof(session_type), "shell");
723 } else {
724 /* NB. we don't log unforced commands to preserve privacy */
725 snprintf(session_type, sizeof(session_type), "command");
726 }
727
728 if (s->ttyfd != -1) {
729 tty = s->tty;
730 if (strncmp(tty, "/dev/", 5) == 0)
731 tty += 5;
732 }
733
734 verbose("Starting session: %s%s%s for %s from %.200s port %d",
735 session_type,
736 tty == NULL ? "" : " on ",
737 tty == NULL ? "" : tty,
738 s->pw->pw_name,
739 get_remote_ipaddr(),
740 get_remote_port());
741
742 #ifdef GSSAPI
743 if (options.gss_authentication) {
744 temporarily_use_uid(s->pw);
745 ssh_gssapi_storecreds();
746 restore_uid();
747 }
748 #endif
749 if (s->ttyfd != -1)
750 ret = do_exec_pty(s, command);
751 else
752 ret = do_exec_no_pty(s, command);
753
754 original_command = NULL;
755
756 /*
757 * Clear loginmsg: it's the child's responsibility to display
758 * it to the user, otherwise multiple sessions may accumulate
759 * multiple copies of the login messages.
760 */
761 buffer_clear(&loginmsg);
762
763 return ret;
764 }
765
766
767 /* administrative, login(1)-like work */
768 void
769 do_login(Session *s, const char *command)
770 {
771 socklen_t fromlen;
772 struct sockaddr_storage from;
773 struct passwd * pw = s->pw;
774 pid_t pid = getpid();
775
776 /*
777 * Get IP address of client. If the connection is not a socket, let
778 * the address be 0.0.0.0.
779 */
780 memset(&from, 0, sizeof(from));
781 fromlen = sizeof(from);
782 if (packet_connection_is_on_socket()) {
783 if (getpeername(packet_get_connection_in(),
784 (struct sockaddr *)&from, &fromlen) < 0) {
785 debug("getpeername: %.100s", strerror(errno));
786 cleanup_exit(255);
787 }
788 }
789
790 /* Record that there was a login on that tty from the remote host. */
791 if (!use_privsep)
792 record_login(pid, s->tty, pw->pw_name, pw->pw_uid,
793 get_remote_name_or_ip(utmp_len,
794 options.use_dns),
795 (struct sockaddr *)&from, fromlen);
796
797 if (check_quietlogin(s, command))
798 return;
799
800 display_loginmsg();
801
802 do_motd();
803 }
804
805 /*
806 * Display the message of the day.
807 */
808 void
809 do_motd(void)
810 {
811 FILE *f;
812 char buf[256];
813
814 if (options.print_motd) {
815 f = fopen(login_getcapstr(lc, "welcome", "/etc/motd",
816 "/etc/motd"), "r");
817 if (f) {
818 while (fgets(buf, sizeof(buf), f))
819 fputs(buf, stdout);
820 fclose(f);
821 }
822 }
823 }
824
825
826 /*
827 * Check for quiet login, either .hushlogin or command given.
828 */
829 int
830 check_quietlogin(Session *s, const char *command)
831 {
832 char buf[256];
833 struct passwd *pw = s->pw;
834 struct stat st;
835
836 /* Return 1 if .hushlogin exists or a command given. */
837 if (command != NULL)
838 return 1;
839 snprintf(buf, sizeof(buf), "%.200s/.hushlogin", pw->pw_dir);
840 if (login_getcapbool(lc, "hushlogin", 0) || stat(buf, &st) >= 0)
841 return 1;
842 return 0;
843 }
844
845 /*
846 * Sets the value of the given variable in the environment. If the variable
847 * already exists, its value is overridden.
848 */
849 void
850 child_set_env(char ***envp, u_int *envsizep, const char *name,
851 const char *value)
852 {
853 char **env;
854 u_int envsize;
855 u_int i, namelen;
856
857 if (strchr(name, '=') != NULL) {
858 error("Invalid environment variable \"%.100s\"", name);
859 return;
860 }
861
862 /*
863 * Find the slot where the value should be stored. If the variable
864 * already exists, we reuse the slot; otherwise we append a new slot
865 * at the end of the array, expanding if necessary.
866 */
867 env = *envp;
868 namelen = strlen(name);
869 for (i = 0; env[i]; i++)
870 if (strncmp(env[i], name, namelen) == 0 && env[i][namelen] == '=')
871 break;
872 if (env[i]) {
873 /* Reuse the slot. */
874 free(env[i]);
875 } else {
876 /* New variable. Expand if necessary. */
877 envsize = *envsizep;
878 if (i >= envsize - 1) {
879 if (envsize >= 1000)
880 fatal("child_set_env: too many env vars");
881 envsize += 50;
882 env = (*envp) = xreallocarray(env, envsize, sizeof(char *));
883 *envsizep = envsize;
884 }
885 /* Need to set the NULL pointer at end of array beyond the new slot. */
886 env[i + 1] = NULL;
887 }
888
889 /* Allocate space and format the variable in the appropriate slot. */
890 env[i] = xmalloc(strlen(name) + 1 + strlen(value) + 1);
891 snprintf(env[i], strlen(name) + 1 + strlen(value) + 1, "%s=%s", name, value);
892 }
893
894 /*
895 * Reads environment variables from the given file and adds/overrides them
896 * into the environment. If the file does not exist, this does nothing.
897 * Otherwise, it must consist of empty lines, comments (line starts with '#')
898 * and assignments of the form name=value. No other forms are allowed.
899 */
900 static void
901 read_environment_file(char ***env, u_int *envsize,
902 const char *filename)
903 {
904 FILE *f;
905 char buf[4096];
906 char *cp, *value;
907 u_int lineno = 0;
908
909 f = fopen(filename, "r");
910 if (!f)
911 return;
912
913 while (fgets(buf, sizeof(buf), f)) {
914 if (++lineno > 1000)
915 fatal("Too many lines in environment file %s", filename);
916 for (cp = buf; *cp == ' ' || *cp == '\t'; cp++)
917 ;
918 if (!*cp || *cp == '#' || *cp == '\n')
919 continue;
920
921 cp[strcspn(cp, "\n")] = '\0';
922
923 value = strchr(cp, '=');
924 if (value == NULL) {
925 fprintf(stderr, "Bad line %u in %.100s\n", lineno,
926 filename);
927 continue;
928 }
929 /*
930 * Replace the equals sign by nul, and advance value to
931 * the value string.
932 */
933 *value = '\0';
934 value++;
935 child_set_env(env, envsize, cp, value);
936 }
937 fclose(f);
938 }
939
940 static char **
941 do_setup_env(Session *s, const char *shell)
942 {
943 char buf[256];
944 u_int i, envsize;
945 char **env, *laddr;
946 struct passwd *pw = s->pw;
947
948 /* Initialize the environment. */
949 envsize = 100;
950 env = xcalloc(envsize, sizeof(char *));
951 env[0] = NULL;
952
953 #ifdef GSSAPI
954 /* Allow any GSSAPI methods that we've used to alter
955 * the childs environment as they see fit
956 */
957 ssh_gssapi_do_child(&env, &envsize);
958 #endif
959
960 if (!options.use_login) {
961 /* Set basic environment. */
962 for (i = 0; i < s->num_env; i++)
963 child_set_env(&env, &envsize, s->env[i].name,
964 s->env[i].val);
965
966 child_set_env(&env, &envsize, "USER", pw->pw_name);
967 child_set_env(&env, &envsize, "LOGNAME", pw->pw_name);
968 child_set_env(&env, &envsize, "HOME", pw->pw_dir);
969 if (setusercontext(lc, pw, pw->pw_uid, LOGIN_SETPATH) < 0)
970 child_set_env(&env, &envsize, "PATH", _PATH_STDPATH);
971 else
972 child_set_env(&env, &envsize, "PATH", getenv("PATH"));
973
974 snprintf(buf, sizeof buf, "%.200s/%.50s",
975 _PATH_MAILDIR, pw->pw_name);
976 child_set_env(&env, &envsize, "MAIL", buf);
977
978 /* Normal systems set SHELL by default. */
979 child_set_env(&env, &envsize, "SHELL", shell);
980 }
981 if (getenv("TZ"))
982 child_set_env(&env, &envsize, "TZ", getenv("TZ"));
983
984 /* Set custom environment options from RSA authentication. */
985 if (!options.use_login) {
986 while (custom_environment) {
987 struct envstring *ce = custom_environment;
988 char *str = ce->s;
989
990 for (i = 0; str[i] != '=' && str[i]; i++)
991 ;
992 if (str[i] == '=') {
993 str[i] = 0;
994 child_set_env(&env, &envsize, str, str + i + 1);
995 }
996 custom_environment = ce->next;
997 free(ce->s);
998 free(ce);
999 }
1000 }
1001
1002 /* SSH_CLIENT deprecated */
1003 snprintf(buf, sizeof buf, "%.50s %d %d",
1004 get_remote_ipaddr(), get_remote_port(), get_local_port());
1005 child_set_env(&env, &envsize, "SSH_CLIENT", buf);
1006
1007 laddr = get_local_ipaddr(packet_get_connection_in());
1008 snprintf(buf, sizeof buf, "%.50s %d %.50s %d",
1009 get_remote_ipaddr(), get_remote_port(), laddr, get_local_port());
1010 free(laddr);
1011 child_set_env(&env, &envsize, "SSH_CONNECTION", buf);
1012
1013 if (s->ttyfd != -1)
1014 child_set_env(&env, &envsize, "SSH_TTY", s->tty);
1015 if (s->term)
1016 child_set_env(&env, &envsize, "TERM", s->term);
1017 if (s->display)
1018 child_set_env(&env, &envsize, "DISPLAY", s->display);
1019 if (original_command)
1020 child_set_env(&env, &envsize, "SSH_ORIGINAL_COMMAND",
1021 original_command);
1022 #ifdef KRB5
1023 if (s->authctxt->krb5_ticket_file)
1024 child_set_env(&env, &envsize, "KRB5CCNAME",
1025 s->authctxt->krb5_ticket_file);
1026 #endif
1027 if (auth_sock_name != NULL)
1028 child_set_env(&env, &envsize, SSH_AUTHSOCKET_ENV_NAME,
1029 auth_sock_name);
1030
1031 /* read $HOME/.ssh/environment. */
1032 if (options.permit_user_env && !options.use_login) {
1033 snprintf(buf, sizeof buf, "%.200s/.ssh/environment",
1034 pw->pw_dir);
1035 read_environment_file(&env, &envsize, buf);
1036 }
1037 if (debug_flag) {
1038 /* dump the environment */
1039 fprintf(stderr, "Environment:\n");
1040 for (i = 0; env[i]; i++)
1041 fprintf(stderr, " %.200s\n", env[i]);
1042 }
1043 return env;
1044 }
1045
1046 /*
1047 * Run $HOME/.ssh/rc, /etc/ssh/sshrc, or xauth (whichever is found
1048 * first in this order).
1049 */
1050 static void
1051 do_rc_files(Session *s, const char *shell)
1052 {
1053 FILE *f = NULL;
1054 char cmd[1024];
1055 int do_xauth;
1056 struct stat st;
1057
1058 do_xauth =
1059 s->display != NULL && s->auth_proto != NULL && s->auth_data != NULL;
1060
1061 /* ignore _PATH_SSH_USER_RC for subsystems and admin forced commands */
1062 if (!s->is_subsystem && options.adm_forced_command == NULL &&
1063 !no_user_rc && options.permit_user_rc &&
1064 stat(_PATH_SSH_USER_RC, &st) >= 0) {
1065 snprintf(cmd, sizeof cmd, "%s -c '%s %s'",
1066 shell, _PATH_BSHELL, _PATH_SSH_USER_RC);
1067 if (debug_flag)
1068 fprintf(stderr, "Running %s\n", cmd);
1069 f = popen(cmd, "w");
1070 if (f) {
1071 if (do_xauth)
1072 fprintf(f, "%s %s\n", s->auth_proto,
1073 s->auth_data);
1074 pclose(f);
1075 } else
1076 fprintf(stderr, "Could not run %s\n",
1077 _PATH_SSH_USER_RC);
1078 } else if (stat(_PATH_SSH_SYSTEM_RC, &st) >= 0) {
1079 if (debug_flag)
1080 fprintf(stderr, "Running %s %s\n", _PATH_BSHELL,
1081 _PATH_SSH_SYSTEM_RC);
1082 f = popen(_PATH_BSHELL " " _PATH_SSH_SYSTEM_RC, "w");
1083 if (f) {
1084 if (do_xauth)
1085 fprintf(f, "%s %s\n", s->auth_proto,
1086 s->auth_data);
1087 pclose(f);
1088 } else
1089 fprintf(stderr, "Could not run %s\n",
1090 _PATH_SSH_SYSTEM_RC);
1091 } else if (do_xauth && options.xauth_location != NULL) {
1092 /* Add authority data to .Xauthority if appropriate. */
1093 if (debug_flag) {
1094 fprintf(stderr,
1095 "Running %.500s remove %.100s\n",
1096 options.xauth_location, s->auth_display);
1097 fprintf(stderr,
1098 "%.500s add %.100s %.100s %.100s\n",
1099 options.xauth_location, s->auth_display,
1100 s->auth_proto, s->auth_data);
1101 }
1102 snprintf(cmd, sizeof cmd, "%s -q -",
1103 options.xauth_location);
1104 f = popen(cmd, "w");
1105 if (f) {
1106 fprintf(f, "remove %s\n",
1107 s->auth_display);
1108 fprintf(f, "add %s %s %s\n",
1109 s->auth_display, s->auth_proto,
1110 s->auth_data);
1111 pclose(f);
1112 } else {
1113 fprintf(stderr, "Could not run %s\n",
1114 cmd);
1115 }
1116 }
1117 }
1118
1119 static void
1120 do_nologin(struct passwd *pw)
1121 {
1122 FILE *f = NULL;
1123 char buf[1024], *nl, *def_nl = _PATH_NOLOGIN;
1124 struct stat sb;
1125
1126 if (login_getcapbool(lc, "ignorenologin", 0) || pw->pw_uid == 0)
1127 return;
1128 nl = login_getcapstr(lc, "nologin", def_nl, def_nl);
1129
1130 if (stat(nl, &sb) == -1) {
1131 if (nl != def_nl)
1132 free(nl);
1133 return;
1134 }
1135
1136 /* /etc/nologin exists. Print its contents if we can and exit. */
1137 logit("User %.100s not allowed because %s exists", pw->pw_name, nl);
1138 if ((f = fopen(nl, "r")) != NULL) {
1139 while (fgets(buf, sizeof(buf), f))
1140 fputs(buf, stderr);
1141 fclose(f);
1142 }
1143 exit(254);
1144 }
1145
1146 /*
1147 * Chroot into a directory after checking it for safety: all path components
1148 * must be root-owned directories with strict permissions.
1149 */
1150 static void
1151 safely_chroot(const char *path, uid_t uid)
1152 {
1153 const char *cp;
1154 char component[PATH_MAX];
1155 struct stat st;
1156
1157 if (*path != '/')
1158 fatal("chroot path does not begin at root");
1159 if (strlen(path) >= sizeof(component))
1160 fatal("chroot path too long");
1161
1162 /*
1163 * Descend the path, checking that each component is a
1164 * root-owned directory with strict permissions.
1165 */
1166 for (cp = path; cp != NULL;) {
1167 if ((cp = strchr(cp, '/')) == NULL)
1168 strlcpy(component, path, sizeof(component));
1169 else {
1170 cp++;
1171 memcpy(component, path, cp - path);
1172 component[cp - path] = '\0';
1173 }
1174
1175 debug3("%s: checking '%s'", __func__, component);
1176
1177 if (stat(component, &st) != 0)
1178 fatal("%s: stat(\"%s\"): %s", __func__,
1179 component, strerror(errno));
1180 if (st.st_uid != 0 || (st.st_mode & 022) != 0)
1181 fatal("bad ownership or modes for chroot "
1182 "directory %s\"%s\"",
1183 cp == NULL ? "" : "component ", component);
1184 if (!S_ISDIR(st.st_mode))
1185 fatal("chroot path %s\"%s\" is not a directory",
1186 cp == NULL ? "" : "component ", component);
1187
1188 }
1189
1190 if (chdir(path) == -1)
1191 fatal("Unable to chdir to chroot path \"%s\": "
1192 "%s", path, strerror(errno));
1193 if (chroot(path) == -1)
1194 fatal("chroot(\"%s\"): %s", path, strerror(errno));
1195 if (chdir("/") == -1)
1196 fatal("%s: chdir(/) after chroot: %s",
1197 __func__, strerror(errno));
1198 verbose("Changed root directory to \"%s\"", path);
1199 }
1200
1201 /* Set login name, uid, gid, and groups. */
1202 void
1203 do_setusercontext(struct passwd *pw)
1204 {
1205 char *chroot_path, *tmp;
1206
1207 if (getuid() == 0 || geteuid() == 0) {
1208 /* Prepare groups */
1209 if (setusercontext(lc, pw, pw->pw_uid,
1210 (LOGIN_SETALL & ~(LOGIN_SETPATH|LOGIN_SETUSER))) < 0) {
1211 perror("unable to set user context");
1212 exit(1);
1213 }
1214
1215 if (options.chroot_directory != NULL &&
1216 strcasecmp(options.chroot_directory, "none") != 0) {
1217 tmp = tilde_expand_filename(options.chroot_directory,
1218 pw->pw_uid);
1219 chroot_path = percent_expand(tmp, "h", pw->pw_dir,
1220 "u", pw->pw_name, (char *)NULL);
1221 safely_chroot(chroot_path, pw->pw_uid);
1222 free(tmp);
1223 free(chroot_path);
1224 /* Make sure we don't attempt to chroot again */
1225 free(options.chroot_directory);
1226 options.chroot_directory = NULL;
1227 }
1228
1229 /* Set UID */
1230 if (setusercontext(lc, pw, pw->pw_uid, LOGIN_SETUSER) < 0) {
1231 perror("unable to set user context (setuser)");
1232 exit(1);
1233 }
1234 } else if (options.chroot_directory != NULL &&
1235 strcasecmp(options.chroot_directory, "none") != 0) {
1236 fatal("server lacks privileges to chroot to ChrootDirectory");
1237 }
1238
1239 if (getuid() != pw->pw_uid || geteuid() != pw->pw_uid)
1240 fatal("Failed to set uids to %u.", (u_int) pw->pw_uid);
1241 }
1242
1243 static void
1244 do_pwchange(Session *s)
1245 {
1246 fflush(NULL);
1247 fprintf(stderr, "WARNING: Your password has expired.\n");
1248 if (s->ttyfd != -1) {
1249 fprintf(stderr,
1250 "You must change your password now and login again!\n");
1251 execl(_PATH_PASSWD_PROG, "passwd", (char *)NULL);
1252 perror("passwd");
1253 } else {
1254 fprintf(stderr,
1255 "Password change required but no TTY available.\n");
1256 }
1257 exit(1);
1258 }
1259
1260 static void
1261 launch_login(struct passwd *pw, const char *hostname)
1262 {
1263 /* Launch login(1). */
1264
1265 execl("/usr/bin/login", "login", "-h", hostname,
1266 "-p", "-f", "--", pw->pw_name, (char *)NULL);
1267
1268 /* Login couldn't be executed, die. */
1269
1270 perror("login");
1271 exit(1);
1272 }
1273
1274 static void
1275 child_close_fds(void)
1276 {
1277 extern int auth_sock;
1278
1279 if (auth_sock != -1) {
1280 close(auth_sock);
1281 auth_sock = -1;
1282 }
1283
1284 if (packet_get_connection_in() == packet_get_connection_out())
1285 close(packet_get_connection_in());
1286 else {
1287 close(packet_get_connection_in());
1288 close(packet_get_connection_out());
1289 }
1290 /*
1291 * Close all descriptors related to channels. They will still remain
1292 * open in the parent.
1293 */
1294 /* XXX better use close-on-exec? -markus */
1295 channel_close_all();
1296
1297 /*
1298 * Close any extra file descriptors. Note that there may still be
1299 * descriptors left by system functions. They will be closed later.
1300 */
1301 endpwent();
1302
1303 /*
1304 * Close any extra open file descriptors so that we don't have them
1305 * hanging around in clients. Note that we want to do this after
1306 * initgroups, because at least on Solaris 2.3 it leaves file
1307 * descriptors open.
1308 */
1309 closefrom(STDERR_FILENO + 1);
1310 }
1311
1312 /*
1313 * Performs common processing for the child, such as setting up the
1314 * environment, closing extra file descriptors, setting the user and group
1315 * ids, and executing the command or shell.
1316 */
1317 #define ARGV_MAX 10
1318 void
1319 do_child(Session *s, const char *command)
1320 {
1321 extern char **environ;
1322 char **env;
1323 char *argv[ARGV_MAX];
1324 const char *shell, *shell0, *hostname = NULL;
1325 struct passwd *pw = s->pw;
1326 int r = 0;
1327
1328 /* remove hostkey from the child's memory */
1329 destroy_sensitive_data();
1330
1331 /* Force a password change */
1332 if (s->authctxt->force_pwchange) {
1333 do_setusercontext(pw);
1334 child_close_fds();
1335 do_pwchange(s);
1336 exit(1);
1337 }
1338
1339 /* login(1) is only called if we execute the login shell */
1340 if (options.use_login && command != NULL)
1341 options.use_login = 0;
1342
1343 /*
1344 * Login(1) does this as well, and it needs uid 0 for the "-h"
1345 * switch, so we let login(1) to this for us.
1346 */
1347 if (!options.use_login) {
1348 do_nologin(pw);
1349 do_setusercontext(pw);
1350 }
1351
1352 /*
1353 * Get the shell from the password data. An empty shell field is
1354 * legal, and means /bin/sh.
1355 */
1356 shell = (pw->pw_shell[0] == '\0') ? _PATH_BSHELL : pw->pw_shell;
1357
1358 /*
1359 * Make sure $SHELL points to the shell from the password file,
1360 * even if shell is overridden from login.conf
1361 */
1362 env = do_setup_env(s, shell);
1363
1364 shell = login_getcapstr(lc, "shell", (char *)shell, (char *)shell);
1365
1366 /* we have to stash the hostname before we close our socket. */
1367 if (options.use_login)
1368 hostname = get_remote_name_or_ip(utmp_len,
1369 options.use_dns);
1370 /*
1371 * Close the connection descriptors; note that this is the child, and
1372 * the server will still have the socket open, and it is important
1373 * that we do not shutdown it. Note that the descriptors cannot be
1374 * closed before building the environment, as we call
1375 * get_remote_ipaddr there.
1376 */
1377 child_close_fds();
1378
1379 /*
1380 * Must take new environment into use so that .ssh/rc,
1381 * /etc/ssh/sshrc and xauth are run in the proper environment.
1382 */
1383 environ = env;
1384
1385 #ifdef KRB5
1386 /*
1387 * At this point, we check to see if AFS is active and if we have
1388 * a valid Kerberos 5 TGT. If so, it seems like a good idea to see
1389 * if we can (and need to) extend the ticket into an AFS token. If
1390 * we don't do this, we run into potential problems if the user's
1391 * home directory is in AFS and it's not world-readable.
1392 */
1393
1394 if (options.kerberos_get_afs_token && k_hasafs() &&
1395 (s->authctxt->krb5_ctx != NULL)) {
1396 char cell[64];
1397
1398 debug("Getting AFS token");
1399
1400 k_setpag();
1401
1402 if (k_afs_cell_of_file(pw->pw_dir, cell, sizeof(cell)) == 0)
1403 krb5_afslog(s->authctxt->krb5_ctx,
1404 s->authctxt->krb5_fwd_ccache, cell, NULL);
1405
1406 krb5_afslog_home(s->authctxt->krb5_ctx,
1407 s->authctxt->krb5_fwd_ccache, NULL, NULL, pw->pw_dir);
1408 }
1409 #endif
1410
1411 /* Change current directory to the user's home directory. */
1412 if (chdir(pw->pw_dir) < 0) {
1413 /* Suppress missing homedir warning for chroot case */
1414 r = login_getcapbool(lc, "requirehome", 0);
1415 if (r || options.chroot_directory == NULL ||
1416 strcasecmp(options.chroot_directory, "none") == 0)
1417 fprintf(stderr, "Could not chdir to home "
1418 "directory %s: %s\n", pw->pw_dir,
1419 strerror(errno));
1420 if (r)
1421 exit(1);
1422 }
1423
1424 closefrom(STDERR_FILENO + 1);
1425
1426 if (!options.use_login)
1427 do_rc_files(s, shell);
1428
1429 /* restore SIGPIPE for child */
1430 signal(SIGPIPE, SIG_DFL);
1431
1432 if (s->is_subsystem == SUBSYSTEM_INT_SFTP_ERROR) {
1433 printf("This service allows sftp connections only.\n");
1434 fflush(NULL);
1435 exit(1);
1436 } else if (s->is_subsystem == SUBSYSTEM_INT_SFTP) {
1437 extern int optind, optreset;
1438 int i;
1439 char *p, *args;
1440
1441 setproctitle("%s@%s", s->pw->pw_name, INTERNAL_SFTP_NAME);
1442 args = xstrdup(command ? command : "sftp-server");
1443 for (i = 0, (p = strtok(args, " ")); p; (p = strtok(NULL, " ")))
1444 if (i < ARGV_MAX - 1)
1445 argv[i++] = p;
1446 argv[i] = NULL;
1447 optind = optreset = 1;
1448 __progname = argv[0];
1449 exit(sftp_server_main(i, argv, s->pw));
1450 }
1451
1452 fflush(NULL);
1453
1454 if (options.use_login) {
1455 launch_login(pw, hostname);
1456 /* NEVERREACHED */
1457 }
1458
1459 /* Get the last component of the shell name. */
1460 if ((shell0 = strrchr(shell, '/')) != NULL)
1461 shell0++;
1462 else
1463 shell0 = shell;
1464
1465 /*
1466 * If we have no command, execute the shell. In this case, the shell
1467 * name to be passed in argv[0] is preceded by '-' to indicate that
1468 * this is a login shell.
1469 */
1470 if (!command) {
1471 char argv0[256];
1472
1473 /* Start the shell. Set initial character to '-'. */
1474 argv0[0] = '-';
1475
1476 if (strlcpy(argv0 + 1, shell0, sizeof(argv0) - 1)
1477 >= sizeof(argv0) - 1) {
1478 errno = EINVAL;
1479 perror(shell);
1480 exit(1);
1481 }
1482
1483 /* Execute the shell. */
1484 argv[0] = argv0;
1485 argv[1] = NULL;
1486 execve(shell, argv, env);
1487
1488 /* Executing the shell failed. */
1489 perror(shell);
1490 exit(1);
1491 }
1492 /*
1493 * Execute the command using the user's shell. This uses the -c
1494 * option to execute the command.
1495 */
1496 argv[0] = (char *) shell0;
1497 argv[1] = "-c";
1498 argv[2] = (char *) command;
1499 argv[3] = NULL;
1500 execve(shell, argv, env);
1501 perror(shell);
1502 exit(1);
1503 }
1504
1505 void
1506 session_unused(int id)
1507 {
1508 debug3("%s: session id %d unused", __func__, id);
1509 if (id >= options.max_sessions ||
1510 id >= sessions_nalloc) {
1511 fatal("%s: insane session id %d (max %d nalloc %d)",
1512 __func__, id, options.max_sessions, sessions_nalloc);
1513 }
1514 memset(&sessions[id], 0, sizeof(*sessions));
1515 sessions[id].self = id;
1516 sessions[id].used = 0;
1517 sessions[id].chanid = -1;
1518 sessions[id].ptyfd = -1;
1519 sessions[id].ttyfd = -1;
1520 sessions[id].ptymaster = -1;
1521 sessions[id].x11_chanids = NULL;
1522 sessions[id].next_unused = sessions_first_unused;
1523 sessions_first_unused = id;
1524 }
1525
1526 Session *
1527 session_new(void)
1528 {
1529 Session *s, *tmp;
1530
1531 if (sessions_first_unused == -1) {
1532 if (sessions_nalloc >= options.max_sessions)
1533 return NULL;
1534 debug2("%s: allocate (allocated %d max %d)",
1535 __func__, sessions_nalloc, options.max_sessions);
1536 tmp = xreallocarray(sessions, sessions_nalloc + 1,
1537 sizeof(*sessions));
1538 if (tmp == NULL) {
1539 error("%s: cannot allocate %d sessions",
1540 __func__, sessions_nalloc + 1);
1541 return NULL;
1542 }
1543 sessions = tmp;
1544 session_unused(sessions_nalloc++);
1545 }
1546
1547 if (sessions_first_unused >= sessions_nalloc ||
1548 sessions_first_unused < 0) {
1549 fatal("%s: insane first_unused %d max %d nalloc %d",
1550 __func__, sessions_first_unused, options.max_sessions,
1551 sessions_nalloc);
1552 }
1553
1554 s = &sessions[sessions_first_unused];
1555 if (s->used) {
1556 fatal("%s: session %d already used",
1557 __func__, sessions_first_unused);
1558 }
1559 sessions_first_unused = s->next_unused;
1560 s->used = 1;
1561 s->next_unused = -1;
1562 debug("session_new: session %d", s->self);
1563
1564 return s;
1565 }
1566
1567 static void
1568 session_dump(void)
1569 {
1570 int i;
1571 for (i = 0; i < sessions_nalloc; i++) {
1572 Session *s = &sessions[i];
1573
1574 debug("dump: used %d next_unused %d session %d %p "
1575 "channel %d pid %ld",
1576 s->used,
1577 s->next_unused,
1578 s->self,
1579 s,
1580 s->chanid,
1581 (long)s->pid);
1582 }
1583 }
1584
1585 int
1586 session_open(Authctxt *authctxt, int chanid)
1587 {
1588 Session *s = session_new();
1589 debug("session_open: channel %d", chanid);
1590 if (s == NULL) {
1591 error("no more sessions");
1592 return 0;
1593 }
1594 s->authctxt = authctxt;
1595 s->pw = authctxt->pw;
1596 if (s->pw == NULL || !authctxt->valid)
1597 fatal("no user for session %d", s->self);
1598 debug("session_open: session %d: link with channel %d", s->self, chanid);
1599 s->chanid = chanid;
1600 return 1;
1601 }
1602
1603 Session *
1604 session_by_tty(char *tty)
1605 {
1606 int i;
1607 for (i = 0; i < sessions_nalloc; i++) {
1608 Session *s = &sessions[i];
1609 if (s->used && s->ttyfd != -1 && strcmp(s->tty, tty) == 0) {
1610 debug("session_by_tty: session %d tty %s", i, tty);
1611 return s;
1612 }
1613 }
1614 debug("session_by_tty: unknown tty %.100s", tty);
1615 session_dump();
1616 return NULL;
1617 }
1618
1619 static Session *
1620 session_by_channel(int id)
1621 {
1622 int i;
1623 for (i = 0; i < sessions_nalloc; i++) {
1624 Session *s = &sessions[i];
1625 if (s->used && s->chanid == id) {
1626 debug("session_by_channel: session %d channel %d",
1627 i, id);
1628 return s;
1629 }
1630 }
1631 debug("session_by_channel: unknown channel %d", id);
1632 session_dump();
1633 return NULL;
1634 }
1635
1636 static Session *
1637 session_by_x11_channel(int id)
1638 {
1639 int i, j;
1640
1641 for (i = 0; i < sessions_nalloc; i++) {
1642 Session *s = &sessions[i];
1643
1644 if (s->x11_chanids == NULL || !s->used)
1645 continue;
1646 for (j = 0; s->x11_chanids[j] != -1; j++) {
1647 if (s->x11_chanids[j] == id) {
1648 debug("session_by_x11_channel: session %d "
1649 "channel %d", s->self, id);
1650 return s;
1651 }
1652 }
1653 }
1654 debug("session_by_x11_channel: unknown channel %d", id);
1655 session_dump();
1656 return NULL;
1657 }
1658
1659 static Session *
1660 session_by_pid(pid_t pid)
1661 {
1662 int i;
1663 debug("session_by_pid: pid %ld", (long)pid);
1664 for (i = 0; i < sessions_nalloc; i++) {
1665 Session *s = &sessions[i];
1666 if (s->used && s->pid == pid)
1667 return s;
1668 }
1669 error("session_by_pid: unknown pid %ld", (long)pid);
1670 session_dump();
1671 return NULL;
1672 }
1673
1674 static int
1675 session_window_change_req(Session *s)
1676 {
1677 s->col = packet_get_int();
1678 s->row = packet_get_int();
1679 s->xpixel = packet_get_int();
1680 s->ypixel = packet_get_int();
1681 packet_check_eom();
1682 pty_change_window_size(s->ptyfd, s->row, s->col, s->xpixel, s->ypixel);
1683 return 1;
1684 }
1685
1686 static int
1687 session_pty_req(Session *s)
1688 {
1689 u_int len;
1690 int n_bytes;
1691
1692 if (no_pty_flag || !options.permit_tty) {
1693 debug("Allocating a pty not permitted for this authentication.");
1694 return 0;
1695 }
1696 if (s->ttyfd != -1) {
1697 packet_disconnect("Protocol error: you already have a pty.");
1698 return 0;
1699 }
1700
1701 s->term = packet_get_string(&len);
1702
1703 if (compat20) {
1704 s->col = packet_get_int();
1705 s->row = packet_get_int();
1706 } else {
1707 s->row = packet_get_int();
1708 s->col = packet_get_int();
1709 }
1710 s->xpixel = packet_get_int();
1711 s->ypixel = packet_get_int();
1712
1713 if (strcmp(s->term, "") == 0) {
1714 free(s->term);
1715 s->term = NULL;
1716 }
1717
1718 /* Allocate a pty and open it. */
1719 debug("Allocating pty.");
1720 if (!PRIVSEP(pty_allocate(&s->ptyfd, &s->ttyfd, s->tty,
1721 sizeof(s->tty)))) {
1722 free(s->term);
1723 s->term = NULL;
1724 s->ptyfd = -1;
1725 s->ttyfd = -1;
1726 error("session_pty_req: session %d alloc failed", s->self);
1727 return 0;
1728 }
1729 debug("session_pty_req: session %d alloc %s", s->self, s->tty);
1730
1731 /* for SSH1 the tty modes length is not given */
1732 if (!compat20)
1733 n_bytes = packet_remaining();
1734 tty_parse_modes(s->ttyfd, &n_bytes);
1735
1736 if (!use_privsep)
1737 pty_setowner(s->pw, s->tty);
1738
1739 /* Set window size from the packet. */
1740 pty_change_window_size(s->ptyfd, s->row, s->col, s->xpixel, s->ypixel);
1741
1742 packet_check_eom();
1743 session_proctitle(s);
1744 return 1;
1745 }
1746
1747 static int
1748 session_subsystem_req(Session *s)
1749 {
1750 struct stat st;
1751 u_int len;
1752 int success = 0;
1753 char *prog, *cmd;
1754 u_int i;
1755
1756 s->subsys = packet_get_string(&len);
1757 packet_check_eom();
1758 debug2("subsystem request for %.100s by user %s", s->subsys,
1759 s->pw->pw_name);
1760
1761 for (i = 0; i < options.num_subsystems; i++) {
1762 if (strcmp(s->subsys, options.subsystem_name[i]) == 0) {
1763 prog = options.subsystem_command[i];
1764 cmd = options.subsystem_args[i];
1765 if (strcmp(INTERNAL_SFTP_NAME, prog) == 0) {
1766 s->is_subsystem = SUBSYSTEM_INT_SFTP;
1767 debug("subsystem: %s", prog);
1768 } else {
1769 if (stat(prog, &st) < 0)
1770 debug("subsystem: cannot stat %s: %s",
1771 prog, strerror(errno));
1772 s->is_subsystem = SUBSYSTEM_EXT;
1773 debug("subsystem: exec() %s", cmd);
1774 }
1775 success = do_exec(s, cmd) == 0;
1776 break;
1777 }
1778 }
1779
1780 if (!success)
1781 logit("subsystem request for %.100s by user %s failed, "
1782 "subsystem not found", s->subsys, s->pw->pw_name);
1783
1784 return success;
1785 }
1786
1787 static int
1788 session_x11_req(Session *s)
1789 {
1790 int success;
1791
1792 if (s->auth_proto != NULL || s->auth_data != NULL) {
1793 error("session_x11_req: session %d: "
1794 "x11 forwarding already active", s->self);
1795 return 0;
1796 }
1797 s->single_connection = packet_get_char();
1798 s->auth_proto = packet_get_string(NULL);
1799 s->auth_data = packet_get_string(NULL);
1800 s->screen = packet_get_int();
1801 packet_check_eom();
1802
1803 success = session_setup_x11fwd(s);
1804 if (!success) {
1805 free(s->auth_proto);
1806 free(s->auth_data);
1807 s->auth_proto = NULL;
1808 s->auth_data = NULL;
1809 }
1810 return success;
1811 }
1812
1813 static int
1814 session_shell_req(Session *s)
1815 {
1816 packet_check_eom();
1817 return do_exec(s, NULL) == 0;
1818 }
1819
1820 static int
1821 session_exec_req(Session *s)
1822 {
1823 u_int len, success;
1824
1825 char *command = packet_get_string(&len);
1826 packet_check_eom();
1827 success = do_exec(s, command) == 0;
1828 free(command);
1829 return success;
1830 }
1831
1832 static int
1833 session_break_req(Session *s)
1834 {
1835
1836 packet_get_int(); /* ignored */
1837 packet_check_eom();
1838
1839 if (s->ptymaster == -1 || tcsendbreak(s->ptymaster, 0) < 0)
1840 return 0;
1841 return 1;
1842 }
1843
1844 static int
1845 session_env_req(Session *s)
1846 {
1847 char *name, *val;
1848 u_int name_len, val_len, i;
1849
1850 name = packet_get_cstring(&name_len);
1851 val = packet_get_cstring(&val_len);
1852 packet_check_eom();
1853
1854 /* Don't set too many environment variables */
1855 if (s->num_env > 128) {
1856 debug2("Ignoring env request %s: too many env vars", name);
1857 goto fail;
1858 }
1859
1860 for (i = 0; i < options.num_accept_env; i++) {
1861 if (match_pattern(name, options.accept_env[i])) {
1862 debug2("Setting env %d: %s=%s", s->num_env, name, val);
1863 s->env = xreallocarray(s->env, s->num_env + 1,
1864 sizeof(*s->env));
1865 s->env[s->num_env].name = name;
1866 s->env[s->num_env].val = val;
1867 s->num_env++;
1868 return (1);
1869 }
1870 }
1871 debug2("Ignoring env request %s: disallowed name", name);
1872
1873 fail:
1874 free(name);
1875 free(val);
1876 return (0);
1877 }
1878
1879 static int
1880 session_auth_agent_req(Session *s)
1881 {
1882 static int called = 0;
1883 packet_check_eom();
1884 if (no_agent_forwarding_flag || !options.allow_agent_forwarding) {
1885 debug("session_auth_agent_req: no_agent_forwarding_flag");
1886 return 0;
1887 }
1888 if (called) {
1889 return 0;
1890 } else {
1891 called = 1;
1892 return auth_input_request_forwarding(s->pw);
1893 }
1894 }
1895
1896 int
1897 session_input_channel_req(Channel *c, const char *rtype)
1898 {
1899 int success = 0;
1900 Session *s;
1901
1902 if ((s = session_by_channel(c->self)) == NULL) {
1903 logit("session_input_channel_req: no session %d req %.100s",
1904 c->self, rtype);
1905 return 0;
1906 }
1907 debug("session_input_channel_req: session %d req %s", s->self, rtype);
1908
1909 /*
1910 * a session is in LARVAL state until a shell, a command
1911 * or a subsystem is executed
1912 */
1913 if (c->type == SSH_CHANNEL_LARVAL) {
1914 if (strcmp(rtype, "shell") == 0) {
1915 success = session_shell_req(s);
1916 } else if (strcmp(rtype, "exec") == 0) {
1917 success = session_exec_req(s);
1918 } else if (strcmp(rtype, "pty-req") == 0) {
1919 success = session_pty_req(s);
1920 } else if (strcmp(rtype, "x11-req") == 0) {
1921 success = session_x11_req(s);
1922 } else if (strcmp(rtype, "auth-agent-req (at) openssh.com") == 0) {
1923 success = session_auth_agent_req(s);
1924 } else if (strcmp(rtype, "subsystem") == 0) {
1925 success = session_subsystem_req(s);
1926 } else if (strcmp(rtype, "env") == 0) {
1927 success = session_env_req(s);
1928 }
1929 }
1930 if (strcmp(rtype, "window-change") == 0) {
1931 success = session_window_change_req(s);
1932 } else if (strcmp(rtype, "break") == 0) {
1933 success = session_break_req(s);
1934 }
1935
1936 return success;
1937 }
1938
1939 void
1940 session_set_fds(Session *s, int fdin, int fdout, int fderr, int ignore_fderr,
1941 int is_tty)
1942 {
1943 if (!compat20)
1944 fatal("session_set_fds: called for proto != 2.0");
1945 /*
1946 * now that have a child and a pipe to the child,
1947 * we can activate our channel and register the fd's
1948 */
1949 if (s->chanid == -1)
1950 fatal("no channel for session %d", s->self);
1951 channel_set_fds(s->chanid,
1952 fdout, fdin, fderr,
1953 ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
1954 1, is_tty, CHAN_SES_WINDOW_DEFAULT);
1955 }
1956
1957 /*
1958 * Function to perform pty cleanup. Also called if we get aborted abnormally
1959 * (e.g., due to a dropped connection).
1960 */
1961 void
1962 session_pty_cleanup2(Session *s)
1963 {
1964 if (s == NULL) {
1965 error("session_pty_cleanup: no session");
1966 return;
1967 }
1968 if (s->ttyfd == -1)
1969 return;
1970
1971 debug("session_pty_cleanup: session %d release %s", s->self, s->tty);
1972
1973 /* Record that the user has logged out. */
1974 if (s->pid != 0)
1975 record_logout(s->pid, s->tty);
1976
1977 /* Release the pseudo-tty. */
1978 if (getuid() == 0)
1979 pty_release(s->tty);
1980
1981 /*
1982 * Close the server side of the socket pairs. We must do this after
1983 * the pty cleanup, so that another process doesn't get this pty
1984 * while we're still cleaning up.
1985 */
1986 if (s->ptymaster != -1 && close(s->ptymaster) < 0)
1987 error("close(s->ptymaster/%d): %s",
1988 s->ptymaster, strerror(errno));
1989
1990 /* unlink pty from session */
1991 s->ttyfd = -1;
1992 }
1993
1994 void
1995 session_pty_cleanup(Session *s)
1996 {
1997 PRIVSEP(session_pty_cleanup2(s));
1998 }
1999
2000 static char *
2001 sig2name(int sig)
2002 {
2003 #define SSH_SIG(x) if (sig == SIG ## x) return #x
2004 SSH_SIG(ABRT);
2005 SSH_SIG(ALRM);
2006 SSH_SIG(FPE);
2007 SSH_SIG(HUP);
2008 SSH_SIG(ILL);
2009 SSH_SIG(INT);
2010 SSH_SIG(KILL);
2011 SSH_SIG(PIPE);
2012 SSH_SIG(QUIT);
2013 SSH_SIG(SEGV);
2014 SSH_SIG(TERM);
2015 SSH_SIG(USR1);
2016 SSH_SIG(USR2);
2017 #undef SSH_SIG
2018 return "SIG (at) openssh.com";
2019 }
2020
2021 static void
2022 session_close_x11(int id)
2023 {
2024 Channel *c;
2025
2026 if ((c = channel_by_id(id)) == NULL) {
2027 debug("session_close_x11: x11 channel %d missing", id);
2028 } else {
2029 /* Detach X11 listener */
2030 debug("session_close_x11: detach x11 channel %d", id);
2031 channel_cancel_cleanup(id);
2032 if (c->ostate != CHAN_OUTPUT_CLOSED)
2033 chan_mark_dead(c);
2034 }
2035 }
2036
2037 static void
2038 session_close_single_x11(int id, void *arg)
2039 {
2040 Session *s;
2041 u_int i;
2042
2043 debug3("session_close_single_x11: channel %d", id);
2044 channel_cancel_cleanup(id);
2045 if ((s = session_by_x11_channel(id)) == NULL)
2046 fatal("session_close_single_x11: no x11 channel %d", id);
2047 for (i = 0; s->x11_chanids[i] != -1; i++) {
2048 debug("session_close_single_x11: session %d: "
2049 "closing channel %d", s->self, s->x11_chanids[i]);
2050 /*
2051 * The channel "id" is already closing, but make sure we
2052 * close all of its siblings.
2053 */
2054 if (s->x11_chanids[i] != id)
2055 session_close_x11(s->x11_chanids[i]);
2056 }
2057 free(s->x11_chanids);
2058 s->x11_chanids = NULL;
2059 free(s->display);
2060 s->display = NULL;
2061 free(s->auth_proto);
2062 s->auth_proto = NULL;
2063 free(s->auth_data);
2064 s->auth_data = NULL;
2065 free(s->auth_display);
2066 s->auth_display = NULL;
2067 }
2068
2069 static void
2070 session_exit_message(Session *s, int status)
2071 {
2072 Channel *c;
2073
2074 if ((c = channel_lookup(s->chanid)) == NULL)
2075 fatal("session_exit_message: session %d: no channel %d",
2076 s->self, s->chanid);
2077 debug("session_exit_message: session %d channel %d pid %ld",
2078 s->self, s->chanid, (long)s->pid);
2079
2080 if (WIFEXITED(status)) {
2081 channel_request_start(s->chanid, "exit-status", 0);
2082 packet_put_int(WEXITSTATUS(status));
2083 packet_send();
2084 } else if (WIFSIGNALED(status)) {
2085 channel_request_start(s->chanid, "exit-signal", 0);
2086 packet_put_cstring(sig2name(WTERMSIG(status)));
2087 packet_put_char(WCOREDUMP(status)? 1 : 0);
2088 packet_put_cstring("");
2089 packet_put_cstring("");
2090 packet_send();
2091 } else {
2092 /* Some weird exit cause. Just exit. */
2093 packet_disconnect("wait returned status %04x.", status);
2094 }
2095
2096 /* disconnect channel */
2097 debug("session_exit_message: release channel %d", s->chanid);
2098
2099 /*
2100 * Adjust cleanup callback attachment to send close messages when
2101 * the channel gets EOF. The session will be then be closed
2102 * by session_close_by_channel when the childs close their fds.
2103 */
2104 channel_register_cleanup(c->self, session_close_by_channel, 1);
2105
2106 /*
2107 * emulate a write failure with 'chan_write_failed', nobody will be
2108 * interested in data we write.
2109 * Note that we must not call 'chan_read_failed', since there could
2110 * be some more data waiting in the pipe.
2111 */
2112 if (c->ostate != CHAN_OUTPUT_CLOSED)
2113 chan_write_failed(c);
2114 }
2115
2116 void
2117 session_close(Session *s)
2118 {
2119 u_int i;
2120
2121 debug("session_close: session %d pid %ld", s->self, (long)s->pid);
2122 if (s->ttyfd != -1)
2123 session_pty_cleanup(s);
2124 free(s->term);
2125 free(s->display);
2126 free(s->x11_chanids);
2127 free(s->auth_display);
2128 free(s->auth_data);
2129 free(s->auth_proto);
2130 free(s->subsys);
2131 if (s->env != NULL) {
2132 for (i = 0; i < s->num_env; i++) {
2133 free(s->env[i].name);
2134 free(s->env[i].val);
2135 }
2136 free(s->env);
2137 }
2138 session_proctitle(s);
2139 session_unused(s->self);
2140 }
2141
2142 void
2143 session_close_by_pid(pid_t pid, int status)
2144 {
2145 Session *s = session_by_pid(pid);
2146 if (s == NULL) {
2147 debug("session_close_by_pid: no session for pid %ld",
2148 (long)pid);
2149 return;
2150 }
2151 if (s->chanid != -1)
2152 session_exit_message(s, status);
2153 if (s->ttyfd != -1)
2154 session_pty_cleanup(s);
2155 s->pid = 0;
2156 }
2157
2158 /*
2159 * this is called when a channel dies before
2160 * the session 'child' itself dies
2161 */
2162 void
2163 session_close_by_channel(int id, void *arg)
2164 {
2165 Session *s = session_by_channel(id);
2166 u_int i;
2167
2168 if (s == NULL) {
2169 debug("session_close_by_channel: no session for id %d", id);
2170 return;
2171 }
2172 debug("session_close_by_channel: channel %d child %ld",
2173 id, (long)s->pid);
2174 if (s->pid != 0) {
2175 debug("session_close_by_channel: channel %d: has child", id);
2176 /*
2177 * delay detach of session, but release pty, since
2178 * the fd's to the child are already closed
2179 */
2180 if (s->ttyfd != -1)
2181 session_pty_cleanup(s);
2182 return;
2183 }
2184 /* detach by removing callback */
2185 channel_cancel_cleanup(s->chanid);
2186
2187 /* Close any X11 listeners associated with this session */
2188 if (s->x11_chanids != NULL) {
2189 for (i = 0; s->x11_chanids[i] != -1; i++) {
2190 session_close_x11(s->x11_chanids[i]);
2191 s->x11_chanids[i] = -1;
2192 }
2193 }
2194
2195 s->chanid = -1;
2196 session_close(s);
2197 }
2198
2199 void
2200 session_destroy_all(void (*closefunc)(Session *))
2201 {
2202 int i;
2203 for (i = 0; i < sessions_nalloc; i++) {
2204 Session *s = &sessions[i];
2205 if (s->used) {
2206 if (closefunc != NULL)
2207 closefunc(s);
2208 else
2209 session_close(s);
2210 }
2211 }
2212 }
2213
2214 static char *
2215 session_tty_list(void)
2216 {
2217 static char buf[1024];
2218 int i;
2219 buf[0] = '\0';
2220 for (i = 0; i < sessions_nalloc; i++) {
2221 Session *s = &sessions[i];
2222 if (s->used && s->ttyfd != -1) {
2223 if (buf[0] != '\0')
2224 strlcat(buf, ",", sizeof buf);
2225 strlcat(buf, strrchr(s->tty, '/') + 1, sizeof buf);
2226 }
2227 }
2228 if (buf[0] == '\0')
2229 strlcpy(buf, "notty", sizeof buf);
2230 return buf;
2231 }
2232
2233 void
2234 session_proctitle(Session *s)
2235 {
2236 if (s->pw == NULL)
2237 error("no user for session %d", s->self);
2238 else
2239 setproctitle("%s@%s", s->pw->pw_name, session_tty_list());
2240 }
2241
2242 int
2243 session_setup_x11fwd(Session *s)
2244 {
2245 struct stat st;
2246 char display[512], auth_display[512];
2247 char hostname[NI_MAXHOST];
2248 u_int i;
2249
2250 if (no_x11_forwarding_flag) {
2251 packet_send_debug("X11 forwarding disabled in user configuration file.");
2252 return 0;
2253 }
2254 if (!options.x11_forwarding) {
2255 debug("X11 forwarding disabled in server configuration file.");
2256 return 0;
2257 }
2258 if (options.xauth_location == NULL ||
2259 (stat(options.xauth_location, &st) == -1)) {
2260 packet_send_debug("No xauth program; cannot forward with spoofing.");
2261 return 0;
2262 }
2263 if (options.use_login) {
2264 packet_send_debug("X11 forwarding disabled; "
2265 "not compatible with UseLogin=yes.");
2266 return 0;
2267 }
2268 if (s->display != NULL) {
2269 debug("X11 display already set.");
2270 return 0;
2271 }
2272 if (x11_create_display_inet(options.x11_display_offset,
2273 options.x11_use_localhost, s->single_connection,
2274 &s->display_number, &s->x11_chanids) == -1) {
2275 debug("x11_create_display_inet failed.");
2276 return 0;
2277 }
2278 for (i = 0; s->x11_chanids[i] != -1; i++) {
2279 channel_register_cleanup(s->x11_chanids[i],
2280 session_close_single_x11, 0);
2281 }
2282
2283 /* Set up a suitable value for the DISPLAY variable. */
2284 if (gethostname(hostname, sizeof(hostname)) < 0)
2285 fatal("gethostname: %.100s", strerror(errno));
2286 /*
2287 * auth_display must be used as the displayname when the
2288 * authorization entry is added with xauth(1). This will be
2289 * different than the DISPLAY string for localhost displays.
2290 */
2291 if (options.x11_use_localhost) {
2292 snprintf(display, sizeof display, "localhost:%u.%u",
2293 s->display_number, s->screen);
2294 snprintf(auth_display, sizeof auth_display, "unix:%u.%u",
2295 s->display_number, s->screen);
2296 s->display = xstrdup(display);
2297 s->auth_display = xstrdup(auth_display);
2298 } else {
2299 snprintf(display, sizeof display, "%.400s:%u.%u", hostname,
2300 s->display_number, s->screen);
2301 s->display = xstrdup(display);
2302 s->auth_display = xstrdup(display);
2303 }
2304
2305 return 1;
2306 }
2307
2308 static void
2309 do_authenticated2(Authctxt *authctxt)
2310 {
2311 server_loop2(authctxt);
2312 }
2313
2314 void
2315 do_cleanup(Authctxt *authctxt)
2316 {
2317 static int called = 0;
2318
2319 debug("do_cleanup");
2320
2321 /* no cleanup if we're in the child for login shell */
2322 if (is_child)
2323 return;
2324
2325 /* avoid double cleanup */
2326 if (called)
2327 return;
2328 called = 1;
2329
2330 if (authctxt == NULL || !authctxt->authenticated)
2331 return;
2332 #ifdef KRB5
2333 if (options.kerberos_ticket_cleanup &&
2334 authctxt->krb5_ctx)
2335 krb5_cleanup_proc(authctxt);
2336 #endif
2337
2338 #ifdef GSSAPI
2339 if (compat20 && options.gss_cleanup_creds)
2340 ssh_gssapi_cleanup_creds();
2341 #endif
2342
2343 /* remove agent socket */
2344 auth_sock_cleanup_proc(authctxt->pw);
2345
2346 /*
2347 * Cleanup ptys/utmp only if privsep is disabled,
2348 * or if running in monitor.
2349 */
2350 if (!use_privsep || mm_is_monitor())
2351 session_destroy_all(session_pty_cleanup2);
2352 }
2353