ssh2.h revision 1.11.12.1 1 /* $NetBSD: ssh2.h,v 1.11.12.1 2019/06/10 21:41:12 christos Exp $ */
2 /* $OpenBSD: ssh2.h,v 1.18 2016/05/04 14:22:33 markus Exp $ */
3
4 /*
5 * Copyright (c) 2000 Markus Friedl. All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
26 */
27
28 /*
29 * draft-ietf-secsh-architecture-05.txt
30 *
31 * Transport layer protocol:
32 *
33 * 1-19 Transport layer generic (e.g. disconnect, ignore, debug,
34 * etc)
35 * 20-29 Algorithm negotiation
36 * 30-49 Key exchange method specific (numbers can be reused for
37 * different authentication methods)
38 *
39 * User authentication protocol:
40 *
41 * 50-59 User authentication generic
42 * 60-79 User authentication method specific (numbers can be reused
43 * for different authentication methods)
44 *
45 * Connection protocol:
46 *
47 * 80-89 Connection protocol generic
48 * 90-127 Channel related messages
49 *
50 * Reserved for client protocols:
51 *
52 * 128-191 Reserved
53 *
54 * Local extensions:
55 *
56 * 192-255 Local extensions
57 */
58
59 /* special marker for no message */
60
61 #define SSH_MSG_NONE 0
62
63 /* ranges */
64
65 #define SSH2_MSG_TRANSPORT_MIN 1
66 #define SSH2_MSG_TRANSPORT_MAX 49
67 #define SSH2_MSG_USERAUTH_MIN 50
68 #define SSH2_MSG_USERAUTH_MAX 79
69 #define SSH2_MSG_USERAUTH_PER_METHOD_MIN 60
70 #define SSH2_MSG_USERAUTH_PER_METHOD_MAX SSH2_MSG_USERAUTH_MAX
71 #define SSH2_MSG_CONNECTION_MIN 80
72 #define SSH2_MSG_CONNECTION_MAX 127
73 #define SSH2_MSG_RESERVED_MIN 128
74 #define SSH2_MSG_RESERVED_MAX 191
75 #define SSH2_MSG_LOCAL_MIN 192
76 #define SSH2_MSG_LOCAL_MAX 255
77 #define SSH2_MSG_MIN 1
78 #define SSH2_MSG_MAX 255
79
80 /* transport layer: generic */
81
82 #define SSH2_MSG_DISCONNECT 1
83 #define SSH2_MSG_IGNORE 2
84 #define SSH2_MSG_UNIMPLEMENTED 3
85 #define SSH2_MSG_DEBUG 4
86 #define SSH2_MSG_SERVICE_REQUEST 5
87 #define SSH2_MSG_SERVICE_ACCEPT 6
88 #define SSH2_MSG_EXT_INFO 7
89
90 /* transport layer: alg negotiation */
91
92 #define SSH2_MSG_KEXINIT 20
93 #define SSH2_MSG_NEWKEYS 21
94
95 /* transport layer: kex specific messages, can be reused */
96
97 #define SSH2_MSG_KEXDH_INIT 30
98 #define SSH2_MSG_KEXDH_REPLY 31
99
100 /* dh-group-exchange */
101 #define SSH2_MSG_KEX_DH_GEX_REQUEST_OLD 30
102 #define SSH2_MSG_KEX_DH_GEX_GROUP 31
103 #define SSH2_MSG_KEX_DH_GEX_INIT 32
104 #define SSH2_MSG_KEX_DH_GEX_REPLY 33
105 #define SSH2_MSG_KEX_DH_GEX_REQUEST 34
106
107 /* ecdh */
108 #define SSH2_MSG_KEX_ECDH_INIT 30
109 #define SSH2_MSG_KEX_ECDH_REPLY 31
110
111 /* user authentication: generic */
112
113 #define SSH2_MSG_USERAUTH_REQUEST 50
114 #define SSH2_MSG_USERAUTH_FAILURE 51
115 #define SSH2_MSG_USERAUTH_SUCCESS 52
116 #define SSH2_MSG_USERAUTH_BANNER 53
117
118 /* user authentication: method specific, can be reused */
119
120 #define SSH2_MSG_USERAUTH_PK_OK 60
121 #define SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ 60
122 #define SSH2_MSG_USERAUTH_INFO_REQUEST 60
123 #define SSH2_MSG_USERAUTH_INFO_RESPONSE 61
124
125 /* connection protocol: generic */
126
127 #define SSH2_MSG_GLOBAL_REQUEST 80
128 #define SSH2_MSG_REQUEST_SUCCESS 81
129 #define SSH2_MSG_REQUEST_FAILURE 82
130
131 /* channel related messages */
132
133 #define SSH2_MSG_CHANNEL_OPEN 90
134 #define SSH2_MSG_CHANNEL_OPEN_CONFIRMATION 91
135 #define SSH2_MSG_CHANNEL_OPEN_FAILURE 92
136 #define SSH2_MSG_CHANNEL_WINDOW_ADJUST 93
137 #define SSH2_MSG_CHANNEL_DATA 94
138 #define SSH2_MSG_CHANNEL_EXTENDED_DATA 95
139 #define SSH2_MSG_CHANNEL_EOF 96
140 #define SSH2_MSG_CHANNEL_CLOSE 97
141 #define SSH2_MSG_CHANNEL_REQUEST 98
142 #define SSH2_MSG_CHANNEL_SUCCESS 99
143 #define SSH2_MSG_CHANNEL_FAILURE 100
144
145 /* disconnect reason code */
146
147 #define SSH2_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT 1
148 #define SSH2_DISCONNECT_PROTOCOL_ERROR 2
149 #define SSH2_DISCONNECT_KEY_EXCHANGE_FAILED 3
150 #define SSH2_DISCONNECT_HOST_AUTHENTICATION_FAILED 4
151 #define SSH2_DISCONNECT_RESERVED 4
152 #define SSH2_DISCONNECT_MAC_ERROR 5
153 #define SSH2_DISCONNECT_COMPRESSION_ERROR 6
154 #define SSH2_DISCONNECT_SERVICE_NOT_AVAILABLE 7
155 #define SSH2_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED 8
156 #define SSH2_DISCONNECT_HOST_KEY_NOT_VERIFIABLE 9
157 #define SSH2_DISCONNECT_CONNECTION_LOST 10
158 #define SSH2_DISCONNECT_BY_APPLICATION 11
159 #define SSH2_DISCONNECT_TOO_MANY_CONNECTIONS 12
160 #define SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER 13
161 #define SSH2_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE 14
162 #define SSH2_DISCONNECT_ILLEGAL_USER_NAME 15
163
164 /* misc */
165
166 #define SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED 1
167 #define SSH2_OPEN_CONNECT_FAILED 2
168 #define SSH2_OPEN_UNKNOWN_CHANNEL_TYPE 3
169 #define SSH2_OPEN_RESOURCE_SHORTAGE 4
170
171 #define SSH2_EXTENDED_DATA_STDERR 1
172
173 /* Certificate types for OpenSSH certificate keys extension */
174 #define SSH2_CERT_TYPE_USER 1
175 #define SSH2_CERT_TYPE_HOST 2
176