config revision 1.1.1.5.8.1
1 #!/bin/sh 2 # 3 # OpenSSL config: determine the operating system and run ./Configure 4 # 5 # "config -h" for usage information. 6 # 7 # this is a merge of minarch and GuessOS from the Apache Group. 8 # Originally written by Tim Hudson <tjh (at] cryptsoft.com>. 9 10 # Original Apache Group comments on GuessOS 11 12 # Simple OS/Platform guesser. Similar to config.guess but 13 # much, much smaller. Since it was developed for use with 14 # Apache, it follows under Apache's regular licensing 15 # with one specific addition: Any changes or additions 16 # to this script should be Emailed to the Apache 17 # group (apache (at] apache.org) in general and to 18 # Jim Jagielski (jim (at] jaguNET.com) in specific. 19 # 20 # Be as similar to the output of config.guess/config.sub 21 # as possible. 22 23 PREFIX="" 24 SUFFIX="" 25 TEST="false" 26 EXE="" 27 28 # pick up any command line args to config 29 for i 30 do 31 case "$i" in 32 -d*) PREFIX="debug-";; 33 -t*) TEST="true";; 34 -h*) TEST="true"; cat <<EOF 35 Usage: config [options] 36 -d Add a debug- prefix to machine choice. 37 -t Test mode, do not run the Configure perl script. 38 -h This help. 39 40 Any other text will be passed to the Configure perl script. 41 See INSTALL for instructions. 42 43 EOF 44 ;; 45 *) options=$options" $i" ;; 46 esac 47 done 48 49 # First get uname entries that we use below 50 51 [ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 52 [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 53 [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 54 [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 55 56 57 # Now test for ISC and SCO, since it is has a braindamaged uname. 58 # 59 # We need to work around FreeBSD 1.1.5.1 60 ( 61 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 62 if [ "x$XREL" != "x" ]; then 63 if [ -f /etc/kconfig ]; then 64 case "$XREL" in 65 4.0|4.1) 66 echo "${MACHINE}-whatever-isc4"; exit 0 67 ;; 68 esac 69 else 70 case "$XREL" in 71 3.2v4.2) 72 echo "whatever-whatever-sco3"; exit 0 73 ;; 74 3.2v5.0*) 75 echo "whatever-whatever-sco5"; exit 0 76 ;; 77 4.2MP) 78 case "x${VERSION}" in 79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; 80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; 81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;; 82 esac 83 ;; 84 4.2) 85 echo "whatever-whatever-unixware1"; exit 0 86 ;; 87 5*) 88 case "x${VERSION}" in 89 # We hardcode i586 in place of ${MACHINE} for the 90 # following reason. The catch is that even though Pentium 91 # is minimum requirement for platforms in question, 92 # ${MACHINE} gets always assigned to i386. Now, problem 93 # with i386 is that it makes ./config pass 386 to 94 # ./Configure, which in turn makes make generate 95 # inefficient SHA-1 (for this moment) code. 96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;; 97 esac 98 ;; 99 esac 100 fi 101 fi 102 # Now we simply scan though... In most cases, the SYSTEM info is enough 103 # 104 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 105 MPE/iX:*) 106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` 107 echo "parisc-hp-MPE/iX"; exit 0 108 ;; 109 A/UX:*) 110 echo "m68k-apple-aux3"; exit 0 111 ;; 112 113 AIX:[3-9]:4:*) 114 echo "${MACHINE}-ibm-aix"; exit 0 115 ;; 116 117 AIX:*:[5-9]:*) 118 echo "${MACHINE}-ibm-aix"; exit 0 119 ;; 120 121 AIX:*) 122 echo "${MACHINE}-ibm-aix3"; exit 0 123 ;; 124 125 BeOS:*:BePC) 126 if [ -e /boot/develop/headers/be/bone ]; then 127 echo "beos-x86-bone"; exit 0 128 else 129 echo "beos-x86-r5"; exit 0 130 fi 131 ;; 132 133 dgux:*) 134 echo "${MACHINE}-dg-dgux"; exit 0 135 ;; 136 137 HI-UX:*) 138 echo "${MACHINE}-hi-hiux"; exit 0 139 ;; 140 141 HP-UX:*) 142 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 143 case "$HPUXVER" in 144 1[0-9].*) # HPUX 10 and 11 targets are unified 145 echo "${MACHINE}-hp-hpux1x"; exit 0 146 ;; 147 *) 148 echo "${MACHINE}-hp-hpux"; exit 0 149 ;; 150 esac 151 ;; 152 153 IRIX:5.*) 154 echo "mips2-sgi-irix"; exit 0 155 ;; 156 157 IRIX:6.*) 158 echo "mips3-sgi-irix"; exit 0 159 ;; 160 161 IRIX64:*) 162 echo "mips4-sgi-irix64"; exit 0 163 ;; 164 165 Linux:[2-9].*) 166 echo "${MACHINE}-whatever-linux2"; exit 0 167 ;; 168 169 Linux:1.*) 170 echo "${MACHINE}-whatever-linux1"; exit 0 171 ;; 172 173 GNU*) 174 echo "hurd-x86"; exit 0; 175 ;; 176 177 LynxOS:*) 178 echo "${MACHINE}-lynx-lynxos"; exit 0 179 ;; 180 181 BSD/OS:4.*) # BSD/OS always says 386 182 echo "i486-whatever-bsdi4"; exit 0 183 ;; 184 185 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 186 case `/sbin/sysctl -n hw.model` in 187 Pentium*) 188 echo "i586-whatever-bsdi"; exit 0 189 ;; 190 *) 191 echo "i386-whatever-bsdi"; exit 0 192 ;; 193 esac; 194 ;; 195 196 BSD/386:*|BSD/OS:*) 197 echo "${MACHINE}-whatever-bsdi"; exit 0 198 ;; 199 200 FreeBSD:*:*:*386*) 201 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 202 MACH=`sysctl -n hw.model` 203 ARCH='whatever' 204 case ${MACH} in 205 *386* ) MACH="i386" ;; 206 *486* ) MACH="i486" ;; 207 Pentium\ II*) MACH="i686" ;; 208 Pentium* ) MACH="i586" ;; 209 * ) MACH="$MACHINE" ;; 210 esac 211 case ${MACH} in 212 i[0-9]86 ) ARCH="pc" ;; 213 esac 214 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 215 ;; 216 217 FreeBSD:*) 218 echo "${MACHINE}-whatever-freebsd"; exit 0 219 ;; 220 221 NetBSD:*:*:*386*) 222 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 223 ;; 224 225 NetBSD:*) 226 echo "${MACHINE}-whatever-netbsd"; exit 0 227 ;; 228 229 OpenBSD:*) 230 echo "${MACHINE}-whatever-openbsd"; exit 0 231 ;; 232 233 OpenUNIX:*) 234 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 235 ;; 236 237 OSF1:*:*:*alpha*) 238 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 239 case "$OSFMAJOR" in 240 4|5) 241 echo "${MACHINE}-dec-tru64"; exit 0 242 ;; 243 1|2|3) 244 echo "${MACHINE}-dec-osf"; exit 0 245 ;; 246 *) 247 echo "${MACHINE}-dec-osf"; exit 0 248 ;; 249 esac 250 ;; 251 252 QNX:*) 253 case "$RELEASE" in 254 4*) 255 echo "${MACHINE}-whatever-qnx4" 256 ;; 257 6*) 258 echo "${MACHINE}-whatever-qnx6" 259 ;; 260 *) 261 echo "${MACHINE}-whatever-qnx" 262 ;; 263 esac 264 exit 0 265 ;; 266 267 Paragon*:*:*:*) 268 echo "i860-intel-osf1"; exit 0 269 ;; 270 271 Rhapsody:*) 272 echo "ppc-apple-rhapsody"; exit 0 273 ;; 274 275 Darwin:*) 276 case "$MACHINE" in 277 Power*) 278 echo "ppc-apple-darwin${VERSION}" 279 ;; 280 *) 281 echo "i686-apple-darwin${VERSION}" 282 ;; 283 esac 284 exit 0 285 ;; 286 287 SunOS:5.*) 288 echo "${MACHINE}-whatever-solaris2"; exit 0 289 ;; 290 291 SunOS:*) 292 echo "${MACHINE}-sun-sunos4"; exit 0 293 ;; 294 295 UNIX_System_V:4.*:*) 296 echo "${MACHINE}-whatever-sysv4"; exit 0 297 ;; 298 299 VOS:*:*:i786) 300 echo "i386-stratus-vos"; exit 0 301 ;; 302 303 VOS:*:*:*) 304 echo "hppa1.1-stratus-vos"; exit 0 305 ;; 306 307 *:4*:R4*:m88k) 308 echo "${MACHINE}-whatever-sysv4"; exit 0 309 ;; 310 311 DYNIX/ptx:4*:*) 312 echo "${MACHINE}-whatever-sysv4"; exit 0 313 ;; 314 315 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 316 echo "i486-ncr-sysv4"; exit 0 317 ;; 318 319 ULTRIX:*) 320 echo "${MACHINE}-unknown-ultrix"; exit 0 321 ;; 322 323 SINIX*|ReliantUNIX*) 324 echo "${MACHINE}-siemens-sysv4"; exit 0 325 ;; 326 327 POSIX-BC*) 328 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 329 ;; 330 331 machten:*) 332 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 333 ;; 334 335 library:*) 336 echo "${MACHINE}-ncr-sysv4"; exit 0 337 ;; 338 339 ConvexOS:*:11.0:*) 340 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 341 ;; 342 343 NEWS-OS:4.*) 344 echo "mips-sony-newsos4"; exit 0; 345 ;; 346 347 MINGW*) 348 echo "${MACHINE}-whatever-mingw"; exit 0; 349 ;; 350 CYGWIN*) 351 case "$RELEASE" in 352 [bB]*|1.0|1.[12].*) 353 echo "${MACHINE}-whatever-cygwin_pre1.3" 354 ;; 355 *) 356 echo "${MACHINE}-whatever-cygwin" 357 ;; 358 esac 359 exit 0 360 ;; 361 362 *"CRAY T3E") 363 echo "t3e-cray-unicosmk"; exit 0; 364 ;; 365 366 *CRAY*) 367 echo "j90-cray-unicos"; exit 0; 368 ;; 369 370 NONSTOP_KERNEL*) 371 echo "nsr-tandem-nsk"; exit 0; 372 ;; 373 374 vxworks*) 375 echo "${MACHINE}-whatever-vxworks"; exit 0; 376 ;; 377 esac 378 379 # 380 # Ugg. These are all we can determine by what we know about 381 # the output of uname. Be more creative: 382 # 383 384 # Do the Apollo stuff first. Here, we just simply assume 385 # that the existance of the /usr/apollo directory is proof 386 # enough 387 if [ -d /usr/apollo ]; then 388 echo "whatever-apollo-whatever" 389 exit 0 390 fi 391 392 # Now NeXT 393 ISNEXT=`hostinfo 2>/dev/null` 394 case "$ISNEXT" in 395 *'NeXT Mach 3.3'*) 396 echo "whatever-next-nextstep3.3"; exit 0 397 ;; 398 *NeXT*) 399 echo "whatever-next-nextstep"; exit 0 400 ;; 401 esac 402 403 # At this point we gone through all the one's 404 # we know of: Punt 405 406 echo "${MACHINE}-whatever-${SYSTEM}" 407 exit 0 408 ) 2>/dev/null | ( 409 410 # --------------------------------------------------------------------------- 411 # this is where the translation occurs into SSLeay terms 412 # --------------------------------------------------------------------------- 413 414 # Only set CC if not supplied already 415 if [ -z "$CROSS_COMPILE$CC" ]; then 416 GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null` 417 if [ "$GCCVER" != "" ]; then 418 # then strip off whatever prefix egcs prepends the number with... 419 # Hopefully, this will work for any future prefixes as well. 420 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` 421 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion 422 # does give us what we want though, so we use that. We just just the 423 # major and minor version numbers. 424 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 425 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 426 CC=gcc 427 else 428 CC=cc 429 fi 430 fi 431 GCCVER=${GCCVER:-0} 432 if [ "$SYSTEM" = "HP-UX" ];then 433 # By default gcc is a ILP32 compiler (with long long == 64). 434 GCC_BITS="32" 435 if [ $GCCVER -ge 30 ]; then 436 # PA64 support only came in with gcc 3.0.x. 437 # We check if the preprocessor symbol __LP64__ is defined... 438 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then 439 : # __LP64__ has slipped through, it therefore is not defined 440 else 441 GCC_BITS="64" 442 fi 443 fi 444 fi 445 if [ "$SYSTEM" = "SunOS" ]; then 446 if [ $GCCVER -ge 30 ]; then 447 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears 448 # to be working, at the very least 'make test' passes... 449 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then 450 GCC_ARCH="-m64" 451 else 452 GCC_ARCH="-m32" 453 fi 454 fi 455 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 456 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 457 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 458 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 459 CCVER=${CCVER:-0} 460 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then 461 CC=cc # overrides gcc!!! 462 if [ $CCVER -eq 50 ]; then 463 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 464 echo " patch #107357-01 or later applied." 465 sleep 5 466 fi 467 fi 468 fi 469 470 if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then 471 # check for Compaq C, expected output is "blah-blah C Vx.x" 472 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ 473 egrep -e '.* C V[0-9]\.[0-9]' | \ 474 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` 475 CCCVER=${CCCVER:-0} 476 if [ $CCCVER -gt 60 ]; then 477 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably 478 # only on hash routines and des, otherwise gcc (2.95) 479 # keeps along rather tight... 480 fi 481 fi 482 483 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc 484 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc 485 fi 486 487 CCVER=${CCVER:-0} 488 489 # read the output of the embedded GuessOS 490 read GUESSOS 491 492 echo Operating system: $GUESSOS 493 494 # now map the output into SSLeay terms ... really should hack into the 495 # script above so we end up with values in vars but that would take 496 # more time that I want to waste at the moment 497 case "$GUESSOS" in 498 uClinux*64*) 499 OUT=uClinux-dist64 500 ;; 501 uClinux*) 502 OUT=uClinux-dist 503 ;; 504 mips2-sgi-irix) 505 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 506 CPU=${CPU:-0} 507 if [ $CPU -ge 4000 ]; then 508 options="$options -mips2" 509 fi 510 OUT="irix-$CC" 511 ;; 512 mips3-sgi-irix) 513 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 514 #CPU=${CPU:-0} 515 #if [ $CPU -ge 5000 ]; then 516 # options="$options -mips4" 517 #else 518 # options="$options -mips3" 519 #fi 520 OUT="irix-mips3-$CC" 521 ;; 522 mips4-sgi-irix64) 523 echo "WARNING! If you wish to build 64-bit library, then you have to" 524 echo " invoke './Configure irix64-mips4-$CC' *manually*." 525 if [ "$TEST" = "false" -a -t 1 ]; then 526 echo " You have about 5 seconds to press Ctrl-C to abort." 527 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 528 fi 529 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 530 #CPU=${CPU:-0} 531 #if [ $CPU -ge 5000 ]; then 532 # options="$options -mips4" 533 #else 534 # options="$options -mips3" 535 #fi 536 OUT="irix-mips3-$CC" 537 ;; 538 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 539 ppc-apple-darwin*) 540 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null` 541 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then 542 echo "WARNING! If you wish to build 64-bit library, then you have to" 543 echo " invoke './Configure darwin64-ppc-cc' *manually*." 544 if [ "$TEST" = "false" -a -t 1 ]; then 545 echo " You have about 5 seconds to press Ctrl-C to abort." 546 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 547 fi 548 fi 549 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then 550 OUT="darwin64-ppc-cc" 551 else 552 OUT="darwin-ppc-cc" 553 fi ;; 554 i?86-apple-darwin*) 555 ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null` 556 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then 557 echo "WARNING! If you wish to build 64-bit library, then you have to" 558 echo " invoke './Configure darwin64-x86_64-cc' *manually*." 559 if [ "$TEST" = "false" -a -t 1 ]; then 560 echo " You have about 5 seconds to press Ctrl-C to abort." 561 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 562 fi 563 fi 564 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then 565 OUT="darwin64-x86_64-cc" 566 else 567 OUT="darwin-i386-cc" 568 fi ;; 569 armv6+7-*-iphoneos) 570 options="$options -arch%20armv6 -arch%20armv7" 571 OUT="iphoneos-cross" ;; 572 *-*-iphoneos) 573 options="$options -arch%20${MACHINE}" 574 OUT="iphoneos-cross" ;; 575 alpha-*-linux2) 576 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` 577 case ${ISA:-generic} in 578 *[678]) OUT="linux-alpha+bwx-$CC" ;; 579 *) OUT="linux-alpha-$CC" ;; 580 esac 581 if [ "$CC" = "gcc" ]; then 582 case ${ISA:-generic} in 583 EV5|EV45) options="$options -mcpu=ev5";; 584 EV56|PCA56) options="$options -mcpu=ev56";; 585 *) options="$options -mcpu=ev6";; 586 esac 587 fi 588 ;; 589 ppc64-*-linux2) 590 if [ -z "$KERNEL_BITS" ]; then 591 echo "WARNING! If you wish to build 64-bit library, then you have to" 592 echo " invoke './Configure linux-ppc64' *manually*." 593 if [ "$TEST" = "false" -a -t 1 ]; then 594 echo " You have about 5 seconds to press Ctrl-C to abort." 595 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 596 fi 597 fi 598 if [ "$KERNEL_BITS" = "64" ]; then 599 OUT="linux-ppc64" 600 else 601 OUT="linux-ppc" 602 (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32" 603 fi 604 ;; 605 ppc64le-*-linux2) OUT="linux-ppc64le" ;; 606 ppc-*-linux2) OUT="linux-ppc" ;; 607 mips64*-*-linux2) 608 echo "WARNING! If you wish to build 64-bit library, then you have to" 609 echo " invoke './Configure linux64-mips64' *manually*." 610 if [ "$TEST" = "false" -a -t 1 ]; then 611 echo " You have about 5 seconds to press Ctrl-C to abort." 612 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 613 fi 614 OUT="linux-mips64" 615 ;; 616 mips*-*-linux2) OUT="linux-mips32" ;; 617 ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;; 618 ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;; 619 pentium-*-vxworks*) OUT="vxworks-pentium" ;; 620 simlinux-*-vxworks*) OUT="vxworks-simlinux" ;; 621 mips-*-vxworks*) OUT="vxworks-mips";; 622 ia64-*-linux?) OUT="linux-ia64" ;; 623 sparc64-*-linux2) 624 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" 625 echo " and wish to build 64-bit library, then you have to" 626 echo " invoke './Configure linux64-sparcv9' *manually*." 627 if [ "$TEST" = "false" -a -t 1 ]; then 628 echo " You have about 5 seconds to press Ctrl-C to abort." 629 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 630 fi 631 OUT="linux-sparcv9" ;; 632 sparc-*-linux2) 633 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` 634 case ${KARCH:-sun4} in 635 sun4u*) OUT="linux-sparcv9" ;; 636 sun4m) OUT="linux-sparcv8" ;; 637 sun4d) OUT="linux-sparcv8" ;; 638 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 639 esac ;; 640 parisc*-*-linux2) 641 # 64-bit builds under parisc64 linux are not supported and 642 # compiler is expected to generate 32-bit objects... 643 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` 644 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` 645 646 # ??TODO ?? Model transformations 647 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 648 # assuming no further arch. identification will ever be used by GCC. 649 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 650 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 651 # for these chips in the future. 652 # PA7300LC -> 7100LC (1.1) 653 # PA8200 -> 8000 (2.0) 654 # PA8500 -> 8000 (2.0) 655 # PA8600 -> 8000 (2.0) 656 657 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` 658 # Finish Model transformations 659 660 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH" 661 OUT="linux-generic32" ;; 662 armv[1-3]*-*-linux2) OUT="linux-generic32" ;; 663 armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;; 664 arm*-*-linux2) OUT="linux-armv4" ;; 665 aarch64-*-linux2) OUT="linux-aarch64" ;; 666 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 667 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; 668 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 669 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 670 s390x-*-linux2) 671 # To be uncommented when glibc bug is fixed, see Configure... 672 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then 673 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you" 674 # echo " have to invoke './Configure linux32-s390x' *manually*." 675 # if [ "$TEST" = "false" -a -t -1 ]; then 676 # echo " You have about 5 seconds to press Ctrl-C to abort." 677 # (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 678 # fi 679 #fi 680 OUT="linux64-s390x" 681 ;; 682 x86_64-*-linux?) OUT="linux-x86_64" ;; 683 *86-*-linux2) OUT="linux-elf" 684 if [ "$GCCVER" -gt 28 ]; then 685 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then 686 options="$options -march=pentium" 687 fi 688 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then 689 options="$options -march=pentiumpro" 690 fi 691 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then 692 options="$options -march=k6" 693 fi 694 fi ;; 695 *-*-linux1) OUT="linux-aout" ;; 696 *-*-linux2) OUT="linux-generic32" ;; 697 sun4[uv]*-*-solaris2) 698 OUT="solaris-sparcv9-$CC" 699 ISA64=`(isalist) 2>/dev/null | grep sparcv9` 700 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then 701 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then 702 echo "WARNING! If you wish to build 64-bit library, then you have to" 703 echo " invoke './Configure solaris64-sparcv9-cc' *manually*." 704 if [ "$TEST" = "false" -a -t 1 ]; then 705 echo " You have about 5 seconds to press Ctrl-C to abort." 706 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 707 fi 708 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then 709 # $GCC_ARCH denotes default ABI chosen by compiler driver 710 # (first one found on the $PATH). I assume that user 711 # expects certain consistency with the rest of his builds 712 # and therefore switch over to 64-bit. <appro> 713 OUT="solaris64-sparcv9-gcc" 714 echo "WARNING! If you wish to build 32-bit library, then you have to" 715 echo " invoke './Configure solaris-sparcv9-gcc' *manually*." 716 if [ "$TEST" = "false" -a -t 1 ]; then 717 echo " You have about 5 seconds to press Ctrl-C to abort." 718 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 719 fi 720 elif [ "$GCC_ARCH" = "-m32" ]; then 721 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" 722 echo " and wish to build 64-bit library, then you have to" 723 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." 724 if [ "$TEST" = "false" -a -t 1 ]; then 725 echo " You have about 5 seconds to press Ctrl-C to abort." 726 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 727 fi 728 fi 729 fi 730 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then 731 OUT="solaris64-sparcv9-$CC" 732 fi 733 ;; 734 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 735 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 736 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 737 *86*-*-solaris2) 738 ISA64=`(isalist) 2>/dev/null | grep amd64` 739 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then 740 OUT="solaris64-x86_64-$CC" 741 else 742 OUT="solaris-x86-$CC" 743 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then 744 options="$options no-sse2" 745 fi 746 fi 747 ;; 748 *-*-sunos4) OUT="sunos-$CC" ;; 749 750 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;; 751 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;; 752 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;; 753 sparc64-*-*bsd*) OUT="BSD-sparc64" ;; 754 ia64-*-*bsd*) OUT="BSD-ia64" ;; 755 amd64-*-*bsd*) OUT="BSD-x86_64" ;; 756 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... 757 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD 758 libc=/usr/lib/libc.so 759 else # OpenBSD 760 # ld searches for highest libc.so.* and so do we 761 libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null` 762 fi 763 case "`(file -L $libc) 2>/dev/null`" in 764 *ELF*) OUT="BSD-x86-elf" ;; 765 *) OUT="BSD-x86"; options="$options no-sse2" ;; 766 esac ;; 767 *-*-*bsd*) OUT="BSD-generic32" ;; 768 769 *-*-osf) OUT="osf1-alpha-cc" ;; 770 *-*-tru64) OUT="tru64-alpha-cc" ;; 771 *-*-[Uu]nix[Ww]are7) 772 if [ "$CC" = "gcc" ]; then 773 OUT="unixware-7-gcc" ; options="$options no-sse2" 774 else 775 OUT="unixware-7" ; options="$options no-sse2 -D__i386__" 776 fi 777 ;; 778 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; 779 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; 780 *-*-vos) 781 options="$options no-threads no-shared no-asm no-dso" 782 EXE=".pm" 783 OUT="vos-$CC" ;; 784 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 785 RM*-siemens-sysv4) OUT="ReliantUNIX" ;; 786 *-siemens-sysv4) OUT="SINIX" ;; 787 *-hpux1*) 788 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then 789 OUT="hpux64-parisc2-gcc" 790 fi 791 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` 792 KERNEL_BITS=${KERNEL_BITS:-32} 793 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` 794 CPU_VERSION=${CPU_VERSION:-0} 795 # See <sys/unistd.h> for further info on CPU_VERSION. 796 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU 797 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 798 OUT="hpux64-ia64-cc" 799 else 800 OUT="hpux-ia64-cc" 801 fi 802 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU 803 OUT=${OUT:-"hpux-parisc2-${CC}"} 804 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 805 echo "WARNING! If you wish to build 64-bit library then you have to" 806 echo " invoke './Configure hpux64-parisc2-cc' *manually*." 807 if [ "$TEST" = "false" -a -t 1 ]; then 808 echo " You have about 5 seconds to press Ctrl-C to abort." 809 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 810 fi 811 fi 812 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU 813 OUT="hpux-parisc-${CC}" 814 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU 815 OUT="hpux-parisc-${CC}" 816 else # Motorola(?) CPU 817 OUT="hpux-$CC" 818 fi 819 options="$options -D_REENTRANT" ;; 820 *-hpux) OUT="hpux-parisc-$CC" ;; 821 *-aix) 822 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` 823 KERNEL_BITS=${KERNEL_BITS:-32} 824 OBJECT_MODE=${OBJECT_MODE:-32} 825 if [ "$CC" = "gcc" ]; then 826 OUT="aix-gcc" 827 if [ $OBJECT_MODE -eq 64 ]; then 828 echo 'Your $OBJECT_MODE was found to be set to 64' 829 OUT="aix64-gcc" 830 fi 831 elif [ $OBJECT_MODE -eq 64 ]; then 832 echo 'Your $OBJECT_MODE was found to be set to 64' 833 OUT="aix64-cc" 834 else 835 OUT="aix-cc" 836 if [ $KERNEL_BITS -eq 64 ]; then 837 echo "WARNING! If you wish to build 64-bit kit, then you have to" 838 echo " invoke './Configure aix64-cc' *manually*." 839 if [ "$TEST" = "false" -a -t 1 ]; then 840 echo " You have ~5 seconds to press Ctrl-C to abort." 841 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 842 fi 843 fi 844 fi 845 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then 846 : # this applies even to Power3 and later, as they return PowerPC_POWER[345] 847 else 848 options="$options no-asm" 849 fi 850 ;; 851 # these are all covered by the catchall below 852 # *-dgux) OUT="dgux" ;; 853 mips-sony-newsos4) OUT="newsos4-gcc" ;; 854 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; 855 i[3456]86-*-cygwin) OUT="Cygwin" ;; 856 *-*-cygwin) OUT="Cygwin-${MACHINE}" ;; 857 t3e-cray-unicosmk) OUT="cray-t3e" ;; 858 j90-cray-unicos) OUT="cray-j90" ;; 859 nsr-tandem-nsk) OUT="tandem-c89" ;; 860 beos-*) OUT="$GUESSOS" ;; 861 x86pc-*-qnx6) OUT="QNX6-i386" ;; 862 *-*-qnx6) OUT="QNX6" ;; 863 x86-*-android|i?86-*-android) OUT="android-x86" ;; 864 armv[7-9]*-*-android) OUT="android-armv7" ;; 865 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 866 esac 867 868 # NB: This atalla support has been superceded by the ENGINE support 869 # That contains its own header and definitions anyway. Support can 870 # be enabled or disabled on any supported platform without external 871 # headers, eg. by adding the "hw-atalla" switch to ./config or 872 # perl Configure 873 # 874 # See whether we can compile Atalla support 875 #if [ -f /usr/include/atasi.h ] 876 #then 877 # options="$options -DATALLA" 878 #fi 879 880 if expr "$options" : '.*no\-asm' > /dev/null; then :; else 881 sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \ 882 grep \\--noexecstack >/dev/null && \ 883 options="$options -Wa,--noexecstack" 884 fi 885 886 # gcc < 2.8 does not support -march=ultrasparc 887 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 888 then 889 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." 890 echo " Upgrade to gcc-2.8 or later." 891 sleep 5 892 OUT=solaris-sparcv8-gcc 893 fi 894 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 895 then 896 echo "WARNING! Falling down to 'linux-sparcv8'." 897 echo " Upgrade to gcc-2.8 or later." 898 sleep 5 899 OUT=linux-sparcv8 900 fi 901 902 case "$GUESSOS" in 903 i386-*) options="$options 386" ;; 904 esac 905 906 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha 907 do 908 if [ ! -d crypto/$i ] 909 then 910 options="$options no-$i" 911 fi 912 done 913 914 # Discover Kerberos 5 (since it's still a prototype, we don't 915 # do any guesses yet, that's why this section is commented away. 916 #if [ -d /usr/kerberos ]; then 917 # krb5_dir=/usr/kerberos 918 # if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ 919 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 920 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 921 # -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ 922 # -a \( -f $krb5_dir/include/krb5.h \) ]; then 923 # options="$options --with-krb5-flavor=MIT" 924 # fi 925 #elif [ -d /usr/heimdal ]; then 926 # krb5_dir=/usr/heimdal 927 # if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ 928 # -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 929 # -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 930 # -a \( -f $krb5_dir/include/krb5.h \) ]; then 931 # options="$options --with-krb5-flavor=Heimdal" 932 # fi 933 #fi 934 935 if [ -z "$OUT" ]; then 936 OUT="$CC" 937 fi 938 939 if [ ".$PERL" = . ] ; then 940 for i in . `echo $PATH | sed 's/:/ /g'`; do 941 if [ -f "$i/perl5$EXE" ] ; then 942 PERL="$i/perl5$EXE" 943 break; 944 fi; 945 done 946 fi 947 948 if [ ".$PERL" = . ] ; then 949 for i in . `echo $PATH | sed 's/:/ /g'`; do 950 if [ -f "$i/perl$EXE" ] ; then 951 if "$i/perl$EXE" -e 'exit($]<5.0)'; then 952 PERL="$i/perl$EXE" 953 break; 954 fi; 955 fi; 956 done 957 fi 958 959 if [ ".$PERL" = . ] ; then 960 echo "You need Perl 5." 961 exit 1 962 fi 963 964 # run Configure to check to see if we need to specify the 965 # compiler for the platform ... in which case we add it on 966 # the end ... otherwise we leave it off 967 968 $PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null 969 if [ $? = "0" ]; then 970 OUT="$OUT-$CC" 971 fi 972 973 OUT="$PREFIX$OUT" 974 975 $PERL ./Configure LIST | grep "$OUT" > /dev/null 976 if [ $? = "0" ]; then 977 echo Configuring for $OUT 978 979 if [ "$TEST" = "true" ]; then 980 echo $PERL ./Configure $OUT $options 981 else 982 $PERL ./Configure $OUT $options 983 fi 984 else 985 echo "This system ($OUT) is not supported. See file INSTALL for details." 986 fi 987 ) 988
Indexes created Tue Apr 28 00:22:25 UTC 2026