config revision 1.1.1.7
1 #!/bin/sh 2 # Copyright 1998-2016 The OpenSSL Project Authors. All Rights Reserved. 3 # 4 # Licensed under the OpenSSL license (the "License"). You may not use 5 # this file except in compliance with the License. You can obtain a copy 6 # in the file LICENSE in the source distribution or at 7 # https://www.openssl.org/source/license.html 8 9 # OpenSSL config: determine the operating system and run ./Configure 10 # Derived from minarch and GuessOS from Apache. 11 # 12 # Do "config -h" for usage information. 13 SUFFIX="" 14 DRYRUN="false" 15 VERBOSE="false" 16 EXE="" 17 THERE=`dirname $0` 18 19 # pick up any command line args to config 20 for i 21 do 22 case "$i" in 23 -d*) options=$options" --debug";; 24 -t*) DRYRUN="true" VERBOSE="true";; 25 -v*) VERBOSE="true";; 26 -h*) DRYRUN="true"; cat <<EOF 27 Usage: config [options] 28 -d Build with debugging when possible. 29 -t Test mode, do not run the Configure perl script. 30 -v Verbose mode, show the exact Configure call that is being made. 31 -h This help. 32 33 Any other text will be passed to the Configure perl script. 34 See INSTALL for instructions. 35 36 EOF 37 ;; 38 *) options=$options" $i" ;; 39 esac 40 done 41 42 # First get uname entries that we use below 43 44 [ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 45 [ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 46 [ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 47 [ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 48 49 50 # Now test for ISC and SCO, since it is has a braindamaged uname. 51 # 52 # We need to work around FreeBSD 1.1.5.1 53 ( 54 XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 55 if [ "x$XREL" != "x" ]; then 56 if [ -f /etc/kconfig ]; then 57 case "$XREL" in 58 4.0|4.1) 59 echo "${MACHINE}-whatever-isc4"; exit 0 60 ;; 61 esac 62 else 63 case "$XREL" in 64 3.2v4.2) 65 echo "whatever-whatever-sco3"; exit 0 66 ;; 67 3.2v5.0*) 68 echo "whatever-whatever-sco5"; exit 0 69 ;; 70 4.2MP) 71 case "x${VERSION}" in 72 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; 73 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; 74 x2*) echo "whatever-whatever-unixware2"; exit 0 ;; 75 esac 76 ;; 77 4.2) 78 echo "whatever-whatever-unixware1"; exit 0 79 ;; 80 5*) 81 case "x${VERSION}" in 82 # We hardcode i586 in place of ${MACHINE} for the 83 # following reason. The catch is that even though Pentium 84 # is minimum requirement for platforms in question, 85 # ${MACHINE} gets always assigned to i386. Now, problem 86 # with i386 is that it makes ./config pass 386 to 87 # ./Configure, which in turn makes make generate 88 # inefficient SHA-1 (for this moment) code. 89 x[678]*) echo "i586-sco-unixware7"; exit 0 ;; 90 esac 91 ;; 92 esac 93 fi 94 fi 95 # Now we simply scan though... In most cases, the SYSTEM info is enough 96 # 97 case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 98 A/UX:*) 99 echo "m68k-apple-aux3"; exit 0 100 ;; 101 102 AIX:[3-9]:4:*) 103 echo "${MACHINE}-ibm-aix"; exit 0 104 ;; 105 106 AIX:*:[5-9]:*) 107 echo "${MACHINE}-ibm-aix"; exit 0 108 ;; 109 110 AIX:*) 111 echo "${MACHINE}-ibm-aix3"; exit 0 112 ;; 113 114 HI-UX:*) 115 echo "${MACHINE}-hi-hiux"; exit 0 116 ;; 117 118 HP-UX:*) 119 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 120 case "$HPUXVER" in 121 1[0-9].*) # HPUX 10 and 11 targets are unified 122 echo "${MACHINE}-hp-hpux1x"; exit 0 123 ;; 124 *) 125 echo "${MACHINE}-hp-hpux"; exit 0 126 ;; 127 esac 128 ;; 129 130 IRIX:6.*) 131 echo "mips3-sgi-irix"; exit 0 132 ;; 133 134 IRIX64:*) 135 echo "mips4-sgi-irix64"; exit 0 136 ;; 137 138 Linux:[2-9].*) 139 echo "${MACHINE}-whatever-linux2"; exit 0 140 ;; 141 142 Linux:1.*) 143 echo "${MACHINE}-whatever-linux1"; exit 0 144 ;; 145 146 GNU*) 147 echo "hurd-x86"; exit 0; 148 ;; 149 150 LynxOS:*) 151 echo "${MACHINE}-lynx-lynxos"; exit 0 152 ;; 153 154 BSD/OS:4.*) # BSD/OS always says 386 155 echo "i486-whatever-bsdi4"; exit 0 156 ;; 157 158 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 159 case `/sbin/sysctl -n hw.model` in 160 Pentium*) 161 echo "i586-whatever-bsdi"; exit 0 162 ;; 163 *) 164 echo "i386-whatever-bsdi"; exit 0 165 ;; 166 esac; 167 ;; 168 169 BSD/386:*|BSD/OS:*) 170 echo "${MACHINE}-whatever-bsdi"; exit 0 171 ;; 172 173 FreeBSD:*:*:*386*) 174 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 175 MACH=`sysctl -n hw.model` 176 ARCH='whatever' 177 case ${MACH} in 178 *386* ) MACH="i386" ;; 179 *486* ) MACH="i486" ;; 180 Pentium\ II*) MACH="i686" ;; 181 Pentium* ) MACH="i586" ;; 182 * ) MACH="$MACHINE" ;; 183 esac 184 case ${MACH} in 185 i[0-9]86 ) ARCH="pc" ;; 186 esac 187 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 188 ;; 189 190 FreeBSD:*) 191 echo "${MACHINE}-whatever-freebsd"; exit 0 192 ;; 193 194 Haiku:*) 195 echo "${MACHINE}-whatever-haiku"; exit 0 196 ;; 197 198 NetBSD:*:*:*386*) 199 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 200 ;; 201 202 NetBSD:*) 203 echo "${MACHINE}-whatever-netbsd"; exit 0 204 ;; 205 206 OpenBSD:*) 207 echo "${MACHINE}-whatever-openbsd"; exit 0 208 ;; 209 210 OpenUNIX:*) 211 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 212 ;; 213 214 OSF1:*:*:*alpha*) 215 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 216 case "$OSFMAJOR" in 217 4|5) 218 echo "${MACHINE}-dec-tru64"; exit 0 219 ;; 220 1|2|3) 221 echo "${MACHINE}-dec-osf"; exit 0 222 ;; 223 *) 224 echo "${MACHINE}-dec-osf"; exit 0 225 ;; 226 esac 227 ;; 228 229 QNX:*) 230 case "$RELEASE" in 231 4*) 232 echo "${MACHINE}-whatever-qnx4" 233 ;; 234 6*) 235 echo "${MACHINE}-whatever-qnx6" 236 ;; 237 *) 238 echo "${MACHINE}-whatever-qnx" 239 ;; 240 esac 241 exit 0 242 ;; 243 244 Paragon*:*:*:*) 245 echo "i860-intel-osf1"; exit 0 246 ;; 247 248 Rhapsody:*) 249 echo "ppc-apple-rhapsody"; exit 0 250 ;; 251 252 Darwin:*) 253 case "$MACHINE" in 254 Power*) 255 echo "ppc-apple-darwin${VERSION}" 256 ;; 257 x86_64) 258 echo "x86_64-apple-darwin${VERSION}" 259 ;; 260 *) 261 echo "i686-apple-darwin${VERSION}" 262 ;; 263 esac 264 exit 0 265 ;; 266 267 SunOS:5.*) 268 echo "${MACHINE}-whatever-solaris2"; exit 0 269 ;; 270 271 SunOS:*) 272 echo "${MACHINE}-sun-sunos4"; exit 0 273 ;; 274 275 UNIX_System_V:4.*:*) 276 echo "${MACHINE}-whatever-sysv4"; exit 0 277 ;; 278 279 VOS:*:*:i786) 280 echo "i386-stratus-vos"; exit 0 281 ;; 282 283 VOS:*:*:*) 284 echo "hppa1.1-stratus-vos"; exit 0 285 ;; 286 287 *:4*:R4*:m88k) 288 echo "${MACHINE}-whatever-sysv4"; exit 0 289 ;; 290 291 DYNIX/ptx:4*:*) 292 echo "${MACHINE}-whatever-sysv4"; exit 0 293 ;; 294 295 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 296 echo "i486-ncr-sysv4"; exit 0 297 ;; 298 299 ULTRIX:*) 300 echo "${MACHINE}-unknown-ultrix"; exit 0 301 ;; 302 303 POSIX-BC*) 304 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 305 ;; 306 307 machten:*) 308 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 309 ;; 310 311 library:*) 312 echo "${MACHINE}-ncr-sysv4"; exit 0 313 ;; 314 315 ConvexOS:*:11.0:*) 316 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 317 ;; 318 319 # The following combinations are supported 320 # MINGW64* on x86_64 => mingw64 321 # MINGW32* on x86_64 => mingw 322 # MINGW32* on i?86 => mingw 323 # 324 # MINGW64* on i?86 isn't expected to work... 325 MINGW64*:*:*:x86_64) 326 echo "${MACHINE}-whatever-mingw64"; exit 0; 327 ;; 328 MINGW*) 329 echo "${MACHINE}-whatever-mingw"; exit 0; 330 ;; 331 CYGWIN*) 332 echo "${MACHINE}-pc-cygwin"; exit 0 333 ;; 334 335 vxworks*) 336 echo "${MACHINE}-whatever-vxworks"; exit 0; 337 ;; 338 esac 339 340 # 341 # Ugg. These are all we can determine by what we know about 342 # the output of uname. Be more creative: 343 # 344 345 # Do the Apollo stuff first. Here, we just simply assume 346 # that the existence of the /usr/apollo directory is proof 347 # enough 348 if [ -d /usr/apollo ]; then 349 echo "whatever-apollo-whatever" 350 exit 0 351 fi 352 353 # Now NeXT 354 ISNEXT=`hostinfo 2>/dev/null` 355 case "$ISNEXT" in 356 *'NeXT Mach 3.3'*) 357 echo "whatever-next-nextstep3.3"; exit 0 358 ;; 359 *NeXT*) 360 echo "whatever-next-nextstep"; exit 0 361 ;; 362 esac 363 364 # At this point we gone through all the one's 365 # we know of: Punt 366 367 echo "${MACHINE}-whatever-${SYSTEM}" 368 exit 0 369 ) 2>/dev/null | ( 370 371 # --------------------------------------------------------------------------- 372 # this is where the translation occurs into SSLeay terms 373 # --------------------------------------------------------------------------- 374 375 # Only set CC if not supplied already 376 if [ -z "$CROSS_COMPILE$CC" ]; then 377 GCCVER=`sh -c "gcc -dumpversion" 2>/dev/null` 378 if [ "$GCCVER" != "" ]; then 379 # then strip off whatever prefix egcs prepends the number with... 380 # Hopefully, this will work for any future prefixes as well. 381 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` 382 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion 383 # does give us what we want though, so we use that. We just just the 384 # major and minor version numbers. 385 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 386 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 387 CC=gcc 388 else 389 CC=cc 390 fi 391 fi 392 GCCVER=${GCCVER:-0} 393 if [ "$SYSTEM" = "HP-UX" ];then 394 # By default gcc is a ILP32 compiler (with long long == 64). 395 GCC_BITS="32" 396 if [ $GCCVER -ge 30 ]; then 397 # PA64 support only came in with gcc 3.0.x. 398 # We check if the preprocessor symbol __LP64__ is defined... 399 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then 400 : # __LP64__ has slipped through, it therefore is not defined 401 else 402 GCC_BITS="64" 403 fi 404 fi 405 fi 406 if [ "$SYSTEM" = "SunOS" ]; then 407 if [ $GCCVER -ge 30 ]; then 408 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears 409 # to be working, at the very least 'make test' passes... 410 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then 411 GCC_ARCH="-m64" 412 else 413 GCC_ARCH="-m32" 414 fi 415 fi 416 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 417 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 418 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 419 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 420 CCVER=${CCVER:-0} 421 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then 422 CC=cc # overrides gcc!!! 423 if [ $CCVER -eq 50 ]; then 424 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 425 echo " patch #107357-01 or later applied." 426 sleep 5 427 fi 428 fi 429 fi 430 431 if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc 432 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc 433 fi 434 435 CCVER=${CCVER:-0} 436 437 # read the output of the embedded GuessOS 438 read GUESSOS 439 440 echo Operating system: $GUESSOS 441 442 # now map the output into SSLeay terms ... really should hack into the 443 # script above so we end up with values in vars but that would take 444 # more time that I want to waste at the moment 445 case "$GUESSOS" in 446 uClinux*64*) 447 OUT=uClinux-dist64 448 ;; 449 uClinux*) 450 OUT=uClinux-dist 451 ;; 452 mips3-sgi-irix) 453 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 454 #CPU=${CPU:-0} 455 #if [ $CPU -ge 5000 ]; then 456 # options="$options -mips4" 457 #else 458 # options="$options -mips3" 459 #fi 460 OUT="irix-mips3-$CC" 461 ;; 462 mips4-sgi-irix64) 463 echo "WARNING! If you wish to build 64-bit library, then you have to" 464 echo " invoke '$THERE/Configure irix64-mips4-$CC' *manually*." 465 if [ "$DRYRUN" = "false" -a -t 1 ]; then 466 echo " You have about 5 seconds to press Ctrl-C to abort." 467 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 468 fi 469 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 470 #CPU=${CPU:-0} 471 #if [ $CPU -ge 5000 ]; then 472 # options="$options -mips4" 473 #else 474 # options="$options -mips3" 475 #fi 476 OUT="irix-mips3-$CC" 477 ;; 478 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 479 ppc-apple-darwin*) 480 ISA64=`(sysctl -n hw.optional.64bitops) 2>/dev/null` 481 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then 482 echo "WARNING! If you wish to build 64-bit library, then you have to" 483 echo " invoke '$THERE/Configure darwin64-ppc-cc' *manually*." 484 if [ "$DRYRUN" = "false" -a -t 1 ]; then 485 echo " You have about 5 seconds to press Ctrl-C to abort." 486 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 487 fi 488 fi 489 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then 490 OUT="darwin64-ppc-cc" 491 else 492 OUT="darwin-ppc-cc" 493 fi ;; 494 i?86-apple-darwin*) 495 ISA64=`(sysctl -n hw.optional.x86_64) 2>/dev/null` 496 if [ "$ISA64" = "1" -a -z "$KERNEL_BITS" ]; then 497 echo "WARNING! If you wish to build 64-bit library, then you have to" 498 echo " invoke 'KERNEL_BITS=64 $THERE/config $options'." 499 if [ "$DRYRUN" = "false" -a -t 1 ]; then 500 echo " You have about 5 seconds to press Ctrl-C to abort." 501 # The stty technique used elsewhere doesn't work on 502 # MacOS. At least, right now on this Mac. 503 sleep 5 504 fi 505 fi 506 if [ "$ISA64" = "1" -a "$KERNEL_BITS" = "64" ]; then 507 OUT="darwin64-x86_64-cc" 508 else 509 OUT="darwin-i386-cc" 510 fi ;; 511 x86_64-apple-darwin*) 512 if [ -z "$KERNEL_BITS" ]; then 513 echo "WARNING! If you wish to build 32-bit library, then you have to" 514 echo " invoke 'KERNEL_BITS=32 $THERE/config $options'." 515 if [ "$DRYRUN" = "false" -a -t 1 ]; then 516 echo " You have about 5 seconds to press Ctrl-C to abort." 517 # The stty technique used elsewhere doesn't work on 518 # MacOS. At least, right now on this Mac. 519 sleep 5 520 fi 521 fi 522 if [ "$KERNEL_BITS" = "32" ]; then 523 OUT="darwin-i386-cc" 524 else 525 OUT="darwin64-x86_64-cc" 526 fi ;; 527 armv6+7-*-iphoneos) 528 options="$options -arch%20armv6 -arch%20armv7" 529 OUT="iphoneos-cross" ;; 530 *-*-iphoneos) 531 options="$options -arch%20${MACHINE}" 532 OUT="iphoneos-cross" ;; 533 arm64-*-iphoneos|*-*-ios64) 534 OUT="ios64-cross" ;; 535 alpha-*-linux2) 536 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` 537 case ${ISA:-generic} in 538 *[678]) OUT="linux-alpha+bwx-$CC" ;; 539 *) OUT="linux-alpha-$CC" ;; 540 esac 541 if [ "$CC" = "gcc" ]; then 542 case ${ISA:-generic} in 543 EV5|EV45) options="$options -mcpu=ev5";; 544 EV56|PCA56) options="$options -mcpu=ev56";; 545 *) options="$options -mcpu=ev6";; 546 esac 547 fi 548 ;; 549 ppc64-*-linux2) 550 if [ -z "$KERNEL_BITS" ]; then 551 echo "WARNING! If you wish to build 64-bit library, then you have to" 552 echo " invoke '$THERE/Configure linux-ppc64' *manually*." 553 if [ "$DRYRUN" = "false" -a -t 1 ]; then 554 echo " You have about 5 seconds to press Ctrl-C to abort." 555 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 556 fi 557 fi 558 if [ "$KERNEL_BITS" = "64" ]; then 559 OUT="linux-ppc64" 560 else 561 OUT="linux-ppc" 562 (echo "__LP64__" | gcc -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null) || options="$options -m32" 563 fi 564 ;; 565 ppc64le-*-linux2) OUT="linux-ppc64le" ;; 566 ppc-*-linux2) OUT="linux-ppc" ;; 567 mips64*-*-linux2) 568 echo "WARNING! If you wish to build 64-bit library, then you have to" 569 echo " invoke '$THERE/Configure linux64-mips64' *manually*." 570 if [ "$DRYRUN" = "false" -a -t 1 ]; then 571 echo " You have about 5 seconds to press Ctrl-C to abort." 572 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 573 fi 574 OUT="linux-mips64" 575 ;; 576 mips*-*-linux2) OUT="linux-mips32" ;; 577 ppc60x-*-vxworks*) OUT="vxworks-ppc60x" ;; 578 ppcgen-*-vxworks*) OUT="vxworks-ppcgen" ;; 579 pentium-*-vxworks*) OUT="vxworks-pentium" ;; 580 simlinux-*-vxworks*) OUT="vxworks-simlinux" ;; 581 mips-*-vxworks*) OUT="vxworks-mips";; 582 ia64-*-linux?) OUT="linux-ia64" ;; 583 sparc64-*-linux2) 584 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" 585 echo " and wish to build 64-bit library, then you have to" 586 echo " invoke '$THERE/Configure linux64-sparcv9' *manually*." 587 if [ "$DRYRUN" = "false" -a -t 1 ]; then 588 echo " You have about 5 seconds to press Ctrl-C to abort." 589 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 590 fi 591 OUT="linux-sparcv9" ;; 592 sparc-*-linux2) 593 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` 594 case ${KARCH:-sun4} in 595 sun4u*) OUT="linux-sparcv9" ;; 596 sun4m) OUT="linux-sparcv8" ;; 597 sun4d) OUT="linux-sparcv8" ;; 598 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 599 esac ;; 600 parisc*-*-linux2) 601 # 64-bit builds under parisc64 linux are not supported and 602 # compiler is expected to generate 32-bit objects... 603 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` 604 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` 605 606 # ??TODO ?? Model transformations 607 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 608 # assuming no further arch. identification will ever be used by GCC. 609 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 610 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 611 # for these chips in the future. 612 # PA7300LC -> 7100LC (1.1) 613 # PA8200 -> 8000 (2.0) 614 # PA8500 -> 8000 (2.0) 615 # PA8600 -> 8000 (2.0) 616 617 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` 618 # Finish Model transformations 619 620 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH" 621 OUT="linux-generic32" ;; 622 armv[1-3]*-*-linux2) OUT="linux-generic32" ;; 623 armv[7-9]*-*-linux2) OUT="linux-armv4"; options="$options -march=armv7-a" ;; 624 arm*-*-linux2) OUT="linux-armv4" ;; 625 aarch64-*-linux2) OUT="linux-aarch64" ;; 626 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 627 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; 628 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 629 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 630 s390x-*-linux2) 631 # To be uncommented when glibc bug is fixed, see Configure... 632 #if egrep -e '^features.* highgprs' /proc/cpuinfo >/dev/null ; then 633 # echo "WARNING! If you wish to build \"highgprs\" 32-bit library, then you" 634 # echo " have to invoke './Configure linux32-s390x' *manually*." 635 # if [ "$DRYRUN" = "false" -a -t -1 ]; then 636 # echo " You have about 5 seconds to press Ctrl-C to abort." 637 # (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 638 # fi 639 #fi 640 OUT="linux64-s390x" 641 ;; 642 x86_64-*-linux?) 643 if $CC -dM -E -x c /dev/null 2>&1 | grep -q ILP32 > /dev/null; then 644 OUT="linux-x32" 645 else 646 OUT="linux-x86_64" 647 fi ;; 648 *86-*-linux2) 649 # On machines where the compiler understands -m32, prefer a 650 # config target that uses it 651 if $CC -m32 -E -x c /dev/null > /dev/null 2>&1; then 652 OUT="linux-x86" 653 else 654 OUT="linux-elf" 655 fi ;; 656 *86-*-linux1) OUT="linux-aout" ;; 657 *-*-linux?) OUT="linux-generic32" ;; 658 sun4[uv]*-*-solaris2) 659 OUT="solaris-sparcv9-$CC" 660 ISA64=`(isainfo) 2>/dev/null | grep sparcv9` 661 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "" ]; then 662 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then 663 echo "WARNING! If you wish to build 64-bit library, then you have to" 664 echo " invoke '$THERE/Configure solaris64-sparcv9-cc' *manually*." 665 if [ "$DRYRUN" = "false" -a -t 1 ]; then 666 echo " You have about 5 seconds to press Ctrl-C to abort." 667 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 668 fi 669 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then 670 # $GCC_ARCH denotes default ABI chosen by compiler driver 671 # (first one found on the $PATH). I assume that user 672 # expects certain consistency with the rest of his builds 673 # and therefore switch over to 64-bit. <appro> 674 OUT="solaris64-sparcv9-gcc" 675 echo "WARNING! If you wish to build 32-bit library, then you have to" 676 echo " invoke '$THERE/Configure solaris-sparcv9-gcc' *manually*." 677 if [ "$DRYRUN" = "false" -a -t 1 ]; then 678 echo " You have about 5 seconds to press Ctrl-C to abort." 679 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 680 fi 681 elif [ "$GCC_ARCH" = "-m32" ]; then 682 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" 683 echo " and wish to build 64-bit library, then you have to" 684 echo " invoke '$THERE/Configure solaris64-sparcv9-gcc' *manually*." 685 if [ "$DRYRUN" = "false" -a -t 1 ]; then 686 echo " You have about 5 seconds to press Ctrl-C to abort." 687 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 688 fi 689 fi 690 fi 691 if [ "$ISA64" != "" -a "$KERNEL_BITS" = "64" ]; then 692 OUT="solaris64-sparcv9-$CC" 693 fi 694 ;; 695 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 696 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 697 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 698 *86*-*-solaris2) 699 ISA64=`(isainfo) 2>/dev/null | grep amd64` 700 if [ "$ISA64" != "" -a ${KERNEL_BITS:-64} -eq 64 ]; then 701 OUT="solaris64-x86_64-$CC" 702 else 703 OUT="solaris-x86-$CC" 704 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then 705 options="$options no-sse2" 706 fi 707 fi 708 ;; 709 *-*-sunos4) OUT="sunos-$CC" ;; 710 711 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;; 712 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;; 713 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;; 714 sparc64-*-*bsd*) OUT="BSD-sparc64" ;; 715 ia64-*-*bsd*) OUT="BSD-ia64" ;; 716 amd64-*-*bsd*) OUT="BSD-x86_64" ;; 717 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... 718 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD 719 libc=/usr/lib/libc.so 720 else # OpenBSD 721 # ld searches for highest libc.so.* and so do we 722 libc=`(ls /usr/lib/libc.so.* /lib/libc.so.* | tail -1) 2>/dev/null` 723 fi 724 case "`(file -L $libc) 2>/dev/null`" in 725 *ELF*) OUT="BSD-x86-elf" ;; 726 *) OUT="BSD-x86"; options="$options no-sse2" ;; 727 esac ;; 728 *-*-*bsd*) OUT="BSD-generic32" ;; 729 730 x86_64-*-haiku) OUT="haiku-x86_64" ;; 731 *-*-haiku) OUT="haiku-x86" ;; 732 733 *-*-osf) OUT="osf1-alpha-cc" ;; 734 *-*-tru64) OUT="tru64-alpha-cc" ;; 735 *-*-[Uu]nix[Ww]are7) 736 if [ "$CC" = "gcc" ]; then 737 OUT="unixware-7-gcc" ; options="$options no-sse2" 738 else 739 OUT="unixware-7" ; options="$options no-sse2 -D__i386__" 740 fi 741 ;; 742 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; 743 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; 744 *-*-vos) 745 options="$options no-threads no-shared no-asm no-dso" 746 EXE=".pm" 747 OUT="vos-$CC" ;; 748 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 749 *-hpux1*) 750 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then 751 OUT="hpux64-parisc2-gcc" 752 fi 753 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` 754 KERNEL_BITS=${KERNEL_BITS:-32} 755 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` 756 CPU_VERSION=${CPU_VERSION:-0} 757 # See <sys/unistd.h> for further info on CPU_VERSION. 758 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU 759 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 760 OUT="hpux64-ia64-cc" 761 else 762 OUT="hpux-ia64-cc" 763 fi 764 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU 765 OUT=${OUT:-"hpux-parisc2-${CC}"} 766 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 767 echo "WARNING! If you wish to build 64-bit library then you have to" 768 echo " invoke '$THERE/Configure hpux64-parisc2-cc' *manually*." 769 if [ "$DRYRUN" = "false" -a -t 1 ]; then 770 echo " You have about 5 seconds to press Ctrl-C to abort." 771 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 772 fi 773 fi 774 # PA-RISC 2.0 is no longer supported as separate 32-bit 775 # target. This is compensated for by run-time detection 776 # in most critical assembly modules and taking advantage 777 # of 2.0 architecture in PA-RISC 1.1 build. 778 OUT="hpux-parisc1_1-${CC}" 779 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU 780 OUT="hpux-parisc1_1-${CC}" 781 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU 782 OUT="hpux-parisc-${CC}" 783 else # Motorola(?) CPU 784 OUT="hpux-$CC" 785 fi 786 options="$options -D_REENTRANT" ;; 787 *-hpux) OUT="hpux-parisc-$CC" ;; 788 *-aix) 789 [ "$KERNEL_BITS" ] || KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` 790 KERNEL_BITS=${KERNEL_BITS:-32} 791 OBJECT_MODE=${OBJECT_MODE:-32} 792 if [ "$CC" = "gcc" ]; then 793 OUT="aix-gcc" 794 if [ $OBJECT_MODE -eq 64 ]; then 795 echo 'Your $OBJECT_MODE was found to be set to 64' 796 OUT="aix64-gcc" 797 fi 798 elif [ $OBJECT_MODE -eq 64 ]; then 799 echo 'Your $OBJECT_MODE was found to be set to 64' 800 OUT="aix64-cc" 801 else 802 OUT="aix-cc" 803 if [ $KERNEL_BITS -eq 64 ]; then 804 echo "WARNING! If you wish to build 64-bit kit, then you have to" 805 echo " invoke '$THERE/Configure aix64-cc' *manually*." 806 if [ "$DRYRUN" = "false" -a -t 1 ]; then 807 echo " You have ~5 seconds to press Ctrl-C to abort." 808 (trap "stty `stty -g`; exit 0" 2 0; stty -icanon min 0 time 50; read waste) <&1 809 fi 810 fi 811 fi 812 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then 813 : # this applies even to Power3 and later, as they return PowerPC_POWER[345] 814 else 815 options="$options no-asm" 816 fi 817 ;; 818 # these are all covered by the catchall below 819 i[3456]86-*-cygwin) OUT="Cygwin-x86" ;; 820 *-*-cygwin) OUT="Cygwin-${MACHINE}" ;; 821 x86pc-*-qnx6) OUT="QNX6-i386" ;; 822 *-*-qnx6) OUT="QNX6" ;; 823 x86-*-android|i?86-*-android) OUT="android-x86" ;; 824 armv[7-9]*-*-android) 825 OUT="android-armeabi"; options="$options -march=armv7-a" ;; 826 arm*-*-android) OUT="android-armeabi" ;; 827 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 828 esac 829 830 # NB: This atalla support has been superseded by the ENGINE support 831 # That contains its own header and definitions anyway. Support can 832 # be enabled or disabled on any supported platform without external 833 # headers, eg. by adding the "hw-atalla" switch to ./config or 834 # perl Configure 835 # 836 # See whether we can compile Atalla support 837 #if [ -f /usr/include/atasi.h ] 838 #then 839 # options="$options -DATALLA" 840 #fi 841 842 if [ -n "$CONFIG_OPTIONS" ]; then 843 options="$options $CONFIG_OPTIONS" 844 fi 845 846 if expr "$options" : '.*no\-asm' > /dev/null; then :; else 847 sh -c "$CROSS_COMPILE${CC:-gcc} -Wa,--help -c -o /tmp/null.$$.o -x assembler /dev/null && rm /tmp/null.$$.o" 2>&1 | \ 848 grep \\--noexecstack >/dev/null && \ 849 options="$options -Wa,--noexecstack" 850 fi 851 852 # gcc < 2.8 does not support -march=ultrasparc 853 if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 854 then 855 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." 856 echo " Upgrade to gcc-2.8 or later." 857 sleep 5 858 OUT=solaris-sparcv8-gcc 859 fi 860 if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 861 then 862 echo "WARNING! Falling down to 'linux-sparcv8'." 863 echo " Upgrade to gcc-2.8 or later." 864 sleep 5 865 OUT=linux-sparcv8 866 fi 867 868 case "$GUESSOS" in 869 i386-*) options="$options 386" ;; 870 esac 871 872 for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha 873 do 874 if [ ! -d $THERE/crypto/$i ] 875 then 876 options="$options no-$i" 877 fi 878 done 879 880 if [ -z "$OUT" ]; then 881 OUT="$CC" 882 fi 883 884 if [ ".$PERL" = . ] ; then 885 for i in . `echo $PATH | sed 's/:/ /g'`; do 886 if [ -f "$i/perl5$EXE" ] ; then 887 PERL="$i/perl5$EXE" 888 break; 889 fi; 890 done 891 fi 892 893 if [ ".$PERL" = . ] ; then 894 for i in . `echo $PATH | sed 's/:/ /g'`; do 895 if [ -f "$i/perl$EXE" ] ; then 896 if "$i/perl$EXE" -e 'exit($]<5.0)'; then 897 PERL="$i/perl$EXE" 898 break; 899 fi; 900 fi; 901 done 902 fi 903 904 if [ ".$PERL" = . ] ; then 905 echo "You need Perl 5." 906 exit 1 907 fi 908 909 # run Configure to check to see if we need to specify the 910 # compiler for the platform ... in which case we add it on 911 # the end ... otherwise we leave it off 912 913 $PERL $THERE/Configure LIST | grep "$OUT-$CC" > /dev/null 914 if [ $? = "0" ]; then 915 OUT="$OUT-$CC" 916 fi 917 918 OUT="$OUT" 919 920 $PERL $THERE/Configure LIST | grep "$OUT" > /dev/null 921 if [ $? = "0" ]; then 922 echo Configuring for $OUT 923 924 if [ "$VERBOSE" = "true" ]; then 925 echo $PERL $THERE/Configure $OUT $options 926 fi 927 if [ "$DRYRUN" = "false" ]; then 928 $PERL $THERE/Configure $OUT $options 929 fi 930 else 931 echo "This system ($OUT) is not supported. See file INSTALL for details." 932 fi 933 ) 934
Indexes created Tue Apr 28 00:22:25 UTC 2026