70-test_tls13kexmodes.t revision 1.1.1.1.6.1
1 #! /usr/bin/env perl 2 # Copyright 2017-2019 The OpenSSL Project Authors. All Rights Reserved. 3 # 4 # Licensed under the OpenSSL license (the "License"). You may not use 5 # this file except in compliance with the License. You can obtain a copy 6 # in the file LICENSE in the source distribution or at 7 # https://www.openssl.org/source/license.html 8 9 use strict; 10 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file srctop_dir bldtop_dir/; 11 use OpenSSL::Test::Utils; 12 use File::Temp qw(tempfile); 13 use TLSProxy::Proxy; 14 use checkhandshake qw(checkhandshake @handmessages @extensions); 15 16 my $test_name = "test_tls13kexmodes"; 17 setup($test_name); 18 19 plan skip_all => "TLSProxy isn't usable on $^O" 20 if $^O =~ /^(VMS)$/; 21 22 plan skip_all => "$test_name needs the dynamic engine feature enabled" 23 if disabled("engine") || disabled("dynamic-engine"); 24 25 plan skip_all => "$test_name needs the sock feature enabled" 26 if disabled("sock"); 27 28 plan skip_all => "$test_name needs TLSv1.3 enabled" 29 if disabled("tls1_3"); 30 31 $ENV{OPENSSL_ia32cap} = '~0x200000200000000'; 32 $ENV{CTLOG_FILE} = srctop_file("test", "ct", "log_list.conf"); 33 34 35 @handmessages = ( 36 [TLSProxy::Message::MT_CLIENT_HELLO, 37 checkhandshake::ALL_HANDSHAKES], 38 [TLSProxy::Message::MT_SERVER_HELLO, 39 checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE], 40 [TLSProxy::Message::MT_CLIENT_HELLO, 41 checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE], 42 [TLSProxy::Message::MT_SERVER_HELLO, 43 checkhandshake::ALL_HANDSHAKES], 44 [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS, 45 checkhandshake::ALL_HANDSHAKES], 46 [TLSProxy::Message::MT_CERTIFICATE_REQUEST, 47 checkhandshake::CLIENT_AUTH_HANDSHAKE], 48 [TLSProxy::Message::MT_CERTIFICATE, 49 checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)], 50 [TLSProxy::Message::MT_CERTIFICATE_VERIFY, 51 checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)], 52 [TLSProxy::Message::MT_FINISHED, 53 checkhandshake::ALL_HANDSHAKES], 54 [TLSProxy::Message::MT_CERTIFICATE, 55 checkhandshake::CLIENT_AUTH_HANDSHAKE], 56 [TLSProxy::Message::MT_CERTIFICATE_VERIFY, 57 checkhandshake::CLIENT_AUTH_HANDSHAKE], 58 [TLSProxy::Message::MT_FINISHED, 59 checkhandshake::ALL_HANDSHAKES], 60 [0, 0] 61 ); 62 63 @extensions = ( 64 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME, 65 TLSProxy::Message::CLIENT, 66 checkhandshake::SERVER_NAME_CLI_EXTENSION], 67 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST, 68 TLSProxy::Message::CLIENT, 69 checkhandshake::STATUS_REQUEST_CLI_EXTENSION], 70 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS, 71 TLSProxy::Message::CLIENT, 72 checkhandshake::DEFAULT_EXTENSIONS], 73 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS, 74 TLSProxy::Message::CLIENT, 75 checkhandshake::DEFAULT_EXTENSIONS], 76 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS, 77 TLSProxy::Message::CLIENT, 78 checkhandshake::DEFAULT_EXTENSIONS], 79 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN, 80 TLSProxy::Message::CLIENT, 81 checkhandshake::ALPN_CLI_EXTENSION], 82 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT, 83 TLSProxy::Message::CLIENT, 84 checkhandshake::SCT_CLI_EXTENSION], 85 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC, 86 TLSProxy::Message::CLIENT, 87 checkhandshake::DEFAULT_EXTENSIONS], 88 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET, 89 TLSProxy::Message::CLIENT, 90 checkhandshake::DEFAULT_EXTENSIONS], 91 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET, 92 TLSProxy::Message::CLIENT, 93 checkhandshake::DEFAULT_EXTENSIONS], 94 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 95 TLSProxy::Message::CLIENT, 96 checkhandshake::DEFAULT_EXTENSIONS], 97 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 98 TLSProxy::Message::CLIENT, 99 checkhandshake::DEFAULT_EXTENSIONS], 100 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES, 101 TLSProxy::Message::CLIENT, 102 checkhandshake::PSK_KEX_MODES_EXTENSION], 103 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK, 104 TLSProxy::Message::CLIENT, 105 checkhandshake::PSK_CLI_EXTENSION], 106 107 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 108 TLSProxy::Message::SERVER, 109 checkhandshake::DEFAULT_EXTENSIONS], 110 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 111 TLSProxy::Message::SERVER, 112 checkhandshake::KEY_SHARE_HRR_EXTENSION], 113 114 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME, 115 TLSProxy::Message::CLIENT, 116 checkhandshake::SERVER_NAME_CLI_EXTENSION], 117 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST, 118 TLSProxy::Message::CLIENT, 119 checkhandshake::STATUS_REQUEST_CLI_EXTENSION], 120 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS, 121 TLSProxy::Message::CLIENT, 122 checkhandshake::DEFAULT_EXTENSIONS], 123 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS, 124 TLSProxy::Message::CLIENT, 125 checkhandshake::DEFAULT_EXTENSIONS], 126 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS, 127 TLSProxy::Message::CLIENT, 128 checkhandshake::DEFAULT_EXTENSIONS], 129 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN, 130 TLSProxy::Message::CLIENT, 131 checkhandshake::ALPN_CLI_EXTENSION], 132 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT, 133 TLSProxy::Message::CLIENT, 134 checkhandshake::SCT_CLI_EXTENSION], 135 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC, 136 TLSProxy::Message::CLIENT, 137 checkhandshake::DEFAULT_EXTENSIONS], 138 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET, 139 TLSProxy::Message::CLIENT, 140 checkhandshake::DEFAULT_EXTENSIONS], 141 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET, 142 TLSProxy::Message::CLIENT, 143 checkhandshake::DEFAULT_EXTENSIONS], 144 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 145 TLSProxy::Message::CLIENT, 146 checkhandshake::DEFAULT_EXTENSIONS], 147 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 148 TLSProxy::Message::CLIENT, 149 checkhandshake::DEFAULT_EXTENSIONS], 150 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES, 151 TLSProxy::Message::CLIENT, 152 checkhandshake::PSK_KEX_MODES_EXTENSION], 153 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK, 154 TLSProxy::Message::CLIENT, 155 checkhandshake::PSK_CLI_EXTENSION], 156 157 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 158 TLSProxy::Message::SERVER, 159 checkhandshake::DEFAULT_EXTENSIONS], 160 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 161 TLSProxy::Message::SERVER, 162 checkhandshake::KEY_SHARE_SRV_EXTENSION], 163 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_PSK, 164 TLSProxy::Message::SERVER, 165 checkhandshake::PSK_SRV_EXTENSION], 166 167 [TLSProxy::Message::MT_CERTIFICATE, TLSProxy::Message::EXT_STATUS_REQUEST, 168 TLSProxy::Message::SERVER, 169 checkhandshake::STATUS_REQUEST_SRV_EXTENSION], 170 [0,0,0,0] 171 ); 172 173 use constant { 174 DELETE_EXTENSION => 0, 175 EMPTY_EXTENSION => 1, 176 NON_DHE_KEX_MODE_ONLY => 2, 177 DHE_KEX_MODE_ONLY => 3, 178 UNKNOWN_KEX_MODES => 4, 179 BOTH_KEX_MODES => 5 180 }; 181 182 my $proxy = TLSProxy::Proxy->new( 183 undef, 184 cmdstr(app(["openssl"]), display => 1), 185 srctop_file("apps", "server.pem"), 186 (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE}) 187 ); 188 189 #Test 1: First get a session 190 (undef, my $session) = tempfile(); 191 $proxy->clientflags("-sess_out ".$session); 192 $proxy->serverflags("-servername localhost"); 193 $proxy->sessionfile($session); 194 $proxy->start() or plan skip_all => "Unable to start up Proxy for tests"; 195 plan tests => 11; 196 ok(TLSProxy::Message->success(), "Initial connection"); 197 198 #Test 2: Attempt a resume with no kex modes extension. Should not resume 199 $proxy->clear(); 200 $proxy->clientflags("-sess_in ".$session); 201 my $testtype = DELETE_EXTENSION; 202 $proxy->filter(\&modify_kex_modes_filter); 203 $proxy->start(); 204 checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, 205 checkhandshake::DEFAULT_EXTENSIONS 206 | checkhandshake::KEY_SHARE_SRV_EXTENSION 207 | checkhandshake::PSK_CLI_EXTENSION, 208 "Resume with no kex modes"); 209 210 #Test 3: Attempt a resume with empty kex modes extension. Should fail (empty 211 # extension is invalid) 212 $proxy->clear(); 213 $proxy->clientflags("-sess_in ".$session); 214 $testtype = EMPTY_EXTENSION; 215 $proxy->start(); 216 ok(TLSProxy::Message->fail(), "Resume with empty kex modes"); 217 218 #Test 4: Attempt a resume with non-dhe kex mode only. Should resume without a 219 # key_share 220 $proxy->clear(); 221 $proxy->clientflags("-allow_no_dhe_kex -sess_in ".$session); 222 $proxy->serverflags("-allow_no_dhe_kex"); 223 $testtype = NON_DHE_KEX_MODE_ONLY; 224 $proxy->start(); 225 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 226 checkhandshake::DEFAULT_EXTENSIONS 227 | checkhandshake::PSK_KEX_MODES_EXTENSION 228 | checkhandshake::PSK_CLI_EXTENSION 229 | checkhandshake::PSK_SRV_EXTENSION, 230 "Resume with non-dhe kex mode"); 231 232 #Test 5: Attempt a resume with dhe kex mode only. Should resume with a key_share 233 $proxy->clear(); 234 $proxy->clientflags("-sess_in ".$session); 235 $testtype = DHE_KEX_MODE_ONLY; 236 $proxy->start(); 237 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 238 checkhandshake::DEFAULT_EXTENSIONS 239 | checkhandshake::PSK_KEX_MODES_EXTENSION 240 | checkhandshake::KEY_SHARE_SRV_EXTENSION 241 | checkhandshake::PSK_CLI_EXTENSION 242 | checkhandshake::PSK_SRV_EXTENSION, 243 "Resume with non-dhe kex mode"); 244 245 #Test 6: Attempt a resume with only unrecognised kex modes. Should not resume 246 $proxy->clear(); 247 $proxy->clientflags("-sess_in ".$session); 248 $testtype = UNKNOWN_KEX_MODES; 249 $proxy->start(); 250 checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, 251 checkhandshake::DEFAULT_EXTENSIONS 252 | checkhandshake::PSK_KEX_MODES_EXTENSION 253 | checkhandshake::KEY_SHARE_SRV_EXTENSION 254 | checkhandshake::PSK_CLI_EXTENSION, 255 "Resume with empty kex modes"); 256 257 #Test 7: Attempt a resume with both non-dhe and dhe kex mode. Should resume with 258 # a key_share 259 $proxy->clear(); 260 $proxy->clientflags("-sess_in ".$session); 261 $testtype = BOTH_KEX_MODES; 262 $proxy->start(); 263 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 264 checkhandshake::DEFAULT_EXTENSIONS 265 | checkhandshake::PSK_KEX_MODES_EXTENSION 266 | checkhandshake::KEY_SHARE_SRV_EXTENSION 267 | checkhandshake::PSK_CLI_EXTENSION 268 | checkhandshake::PSK_SRV_EXTENSION, 269 "Resume with non-dhe kex mode"); 270 271 #Test 8: Attempt a resume with both non-dhe and dhe kex mode, but unacceptable 272 # initial key_share. Should resume with a key_share following an HRR 273 $proxy->clear(); 274 $proxy->clientflags("-sess_in ".$session); 275 $proxy->serverflags("-curves P-256"); 276 $testtype = BOTH_KEX_MODES; 277 $proxy->start(); 278 checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE, 279 checkhandshake::DEFAULT_EXTENSIONS 280 | checkhandshake::PSK_KEX_MODES_EXTENSION 281 | checkhandshake::KEY_SHARE_SRV_EXTENSION 282 | checkhandshake::KEY_SHARE_HRR_EXTENSION 283 | checkhandshake::PSK_CLI_EXTENSION 284 | checkhandshake::PSK_SRV_EXTENSION, 285 "Resume with both kex modes and HRR"); 286 287 #Test 9: Attempt a resume with dhe kex mode only and an unacceptable initial 288 # key_share. Should resume with a key_share following an HRR 289 $proxy->clear(); 290 $proxy->clientflags("-sess_in ".$session); 291 $proxy->serverflags("-curves P-256"); 292 $testtype = DHE_KEX_MODE_ONLY; 293 $proxy->start(); 294 checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE, 295 checkhandshake::DEFAULT_EXTENSIONS 296 | checkhandshake::PSK_KEX_MODES_EXTENSION 297 | checkhandshake::KEY_SHARE_SRV_EXTENSION 298 | checkhandshake::KEY_SHARE_HRR_EXTENSION 299 | checkhandshake::PSK_CLI_EXTENSION 300 | checkhandshake::PSK_SRV_EXTENSION, 301 "Resume with dhe kex mode and HRR"); 302 303 #Test 10: Attempt a resume with both non-dhe and dhe kex mode, unacceptable 304 # initial key_share and no overlapping groups. Should resume without a 305 # key_share 306 $proxy->clear(); 307 $proxy->clientflags("-allow_no_dhe_kex -curves P-384 -sess_in ".$session); 308 $proxy->serverflags("-allow_no_dhe_kex -curves P-256"); 309 $testtype = BOTH_KEX_MODES; 310 $proxy->start(); 311 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 312 checkhandshake::DEFAULT_EXTENSIONS 313 | checkhandshake::PSK_KEX_MODES_EXTENSION 314 | checkhandshake::PSK_CLI_EXTENSION 315 | checkhandshake::PSK_SRV_EXTENSION, 316 "Resume with both kex modes, no overlapping groups"); 317 318 #Test 11: Attempt a resume with dhe kex mode only, unacceptable 319 # initial key_share and no overlapping groups. Should fail 320 $proxy->clear(); 321 $proxy->clientflags("-curves P-384 -sess_in ".$session); 322 $proxy->serverflags("-curves P-256"); 323 $testtype = DHE_KEX_MODE_ONLY; 324 $proxy->start(); 325 ok(TLSProxy::Message->fail(), "Resume with dhe kex mode, no overlapping groups"); 326 327 unlink $session; 328 329 sub modify_kex_modes_filter 330 { 331 my $proxy = shift; 332 333 # We're only interested in the initial ClientHello 334 return if ($proxy->flight != 0); 335 336 foreach my $message (@{$proxy->message_list}) { 337 if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO) { 338 my $ext; 339 340 if ($testtype == EMPTY_EXTENSION) { 341 $ext = pack "C", 342 0x00; #List length 343 } elsif ($testtype == NON_DHE_KEX_MODE_ONLY) { 344 $ext = pack "C2", 345 0x01, #List length 346 0x00; #psk_ke 347 } elsif ($testtype == DHE_KEX_MODE_ONLY) { 348 $ext = pack "C2", 349 0x01, #List length 350 0x01; #psk_dhe_ke 351 } elsif ($testtype == UNKNOWN_KEX_MODES) { 352 $ext = pack "C3", 353 0x02, #List length 354 0xfe, #unknown 355 0xff; #unknown 356 } elsif ($testtype == BOTH_KEX_MODES) { 357 #We deliberately list psk_ke first...should still use psk_dhe_ke 358 $ext = pack "C3", 359 0x02, #List length 360 0x00, #psk_ke 361 0x01; #psk_dhe_ke 362 } 363 364 if ($testtype == DELETE_EXTENSION) { 365 $message->delete_extension( 366 TLSProxy::Message::EXT_PSK_KEX_MODES); 367 } else { 368 $message->set_extension( 369 TLSProxy::Message::EXT_PSK_KEX_MODES, $ext); 370 } 371 372 $message->repack(); 373 } 374 } 375 } 376
Indexes created Thu Apr 23 00:23:13 UTC 2026