70-test_tls13kexmodes.t revision 1.1.1.3.2.1
1 #! /usr/bin/env perl 2 # Copyright 2017-2021 The OpenSSL Project Authors. All Rights Reserved. 3 # 4 # Licensed under the Apache License 2.0 (the "License"). You may not use 5 # this file except in compliance with the License. You can obtain a copy 6 # in the file LICENSE in the source distribution or at 7 # https://www.openssl.org/source/license.html 8 9 use strict; 10 use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file srctop_dir bldtop_dir/; 11 use OpenSSL::Test::Utils; 12 use File::Temp qw(tempfile); 13 use TLSProxy::Proxy; 14 use checkhandshake qw(checkhandshake @handmessages @extensions); 15 16 my $test_name = "test_tls13kexmodes"; 17 setup($test_name); 18 19 plan skip_all => "TLSProxy isn't usable on $^O" 20 if $^O =~ /^(VMS)$/; 21 22 plan skip_all => "$test_name needs the dynamic engine feature enabled" 23 if disabled("engine") || disabled("dynamic-engine"); 24 25 plan skip_all => "$test_name needs the sock feature enabled" 26 if disabled("sock"); 27 28 plan skip_all => "$test_name needs TLSv1.3 enabled" 29 if disabled("tls1_3") || (disabled("ec") && disabled("dh")); 30 31 plan skip_all => "$test_name needs EC enabled" 32 if disabled("ec"); 33 34 $ENV{OPENSSL_ia32cap} = '~0x200000200000000'; 35 36 37 @handmessages = ( 38 [TLSProxy::Message::MT_CLIENT_HELLO, 39 checkhandshake::ALL_HANDSHAKES], 40 [TLSProxy::Message::MT_SERVER_HELLO, 41 checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE], 42 [TLSProxy::Message::MT_CLIENT_HELLO, 43 checkhandshake::HRR_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE], 44 [TLSProxy::Message::MT_SERVER_HELLO, 45 checkhandshake::ALL_HANDSHAKES], 46 [TLSProxy::Message::MT_ENCRYPTED_EXTENSIONS, 47 checkhandshake::ALL_HANDSHAKES], 48 [TLSProxy::Message::MT_CERTIFICATE_REQUEST, 49 checkhandshake::CLIENT_AUTH_HANDSHAKE], 50 [TLSProxy::Message::MT_CERTIFICATE, 51 checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)], 52 [TLSProxy::Message::MT_CERTIFICATE_VERIFY, 53 checkhandshake::ALL_HANDSHAKES & ~(checkhandshake::RESUME_HANDSHAKE | checkhandshake::HRR_RESUME_HANDSHAKE)], 54 [TLSProxy::Message::MT_FINISHED, 55 checkhandshake::ALL_HANDSHAKES], 56 [TLSProxy::Message::MT_CERTIFICATE, 57 checkhandshake::CLIENT_AUTH_HANDSHAKE], 58 [TLSProxy::Message::MT_CERTIFICATE_VERIFY, 59 checkhandshake::CLIENT_AUTH_HANDSHAKE], 60 [TLSProxy::Message::MT_FINISHED, 61 checkhandshake::ALL_HANDSHAKES], 62 [0, 0] 63 ); 64 65 @extensions = ( 66 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME, 67 TLSProxy::Message::CLIENT, 68 checkhandshake::SERVER_NAME_CLI_EXTENSION], 69 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST, 70 TLSProxy::Message::CLIENT, 71 checkhandshake::STATUS_REQUEST_CLI_EXTENSION], 72 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS, 73 TLSProxy::Message::CLIENT, 74 checkhandshake::DEFAULT_EXTENSIONS], 75 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS, 76 TLSProxy::Message::CLIENT, 77 checkhandshake::DEFAULT_EXTENSIONS], 78 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS, 79 TLSProxy::Message::CLIENT, 80 checkhandshake::DEFAULT_EXTENSIONS], 81 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN, 82 TLSProxy::Message::CLIENT, 83 checkhandshake::ALPN_CLI_EXTENSION], 84 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT, 85 TLSProxy::Message::CLIENT, 86 checkhandshake::SCT_CLI_EXTENSION], 87 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC, 88 TLSProxy::Message::CLIENT, 89 checkhandshake::DEFAULT_EXTENSIONS], 90 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET, 91 TLSProxy::Message::CLIENT, 92 checkhandshake::DEFAULT_EXTENSIONS], 93 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET, 94 TLSProxy::Message::CLIENT, 95 checkhandshake::DEFAULT_EXTENSIONS], 96 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 97 TLSProxy::Message::CLIENT, 98 checkhandshake::DEFAULT_EXTENSIONS], 99 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 100 TLSProxy::Message::CLIENT, 101 checkhandshake::DEFAULT_EXTENSIONS], 102 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES, 103 TLSProxy::Message::CLIENT, 104 checkhandshake::PSK_KEX_MODES_EXTENSION], 105 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK, 106 TLSProxy::Message::CLIENT, 107 checkhandshake::PSK_CLI_EXTENSION], 108 109 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 110 TLSProxy::Message::SERVER, 111 checkhandshake::DEFAULT_EXTENSIONS], 112 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 113 TLSProxy::Message::SERVER, 114 checkhandshake::KEY_SHARE_HRR_EXTENSION], 115 116 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SERVER_NAME, 117 TLSProxy::Message::CLIENT, 118 checkhandshake::SERVER_NAME_CLI_EXTENSION], 119 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_STATUS_REQUEST, 120 TLSProxy::Message::CLIENT, 121 checkhandshake::STATUS_REQUEST_CLI_EXTENSION], 122 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_GROUPS, 123 TLSProxy::Message::CLIENT, 124 checkhandshake::DEFAULT_EXTENSIONS], 125 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EC_POINT_FORMATS, 126 TLSProxy::Message::CLIENT, 127 checkhandshake::DEFAULT_EXTENSIONS], 128 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SIG_ALGS, 129 TLSProxy::Message::CLIENT, 130 checkhandshake::DEFAULT_EXTENSIONS], 131 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ALPN, 132 TLSProxy::Message::CLIENT, 133 checkhandshake::ALPN_CLI_EXTENSION], 134 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SCT, 135 TLSProxy::Message::CLIENT, 136 checkhandshake::SCT_CLI_EXTENSION], 137 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_ENCRYPT_THEN_MAC, 138 TLSProxy::Message::CLIENT, 139 checkhandshake::DEFAULT_EXTENSIONS], 140 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_EXTENDED_MASTER_SECRET, 141 TLSProxy::Message::CLIENT, 142 checkhandshake::DEFAULT_EXTENSIONS], 143 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SESSION_TICKET, 144 TLSProxy::Message::CLIENT, 145 checkhandshake::DEFAULT_EXTENSIONS], 146 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 147 TLSProxy::Message::CLIENT, 148 checkhandshake::DEFAULT_EXTENSIONS], 149 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 150 TLSProxy::Message::CLIENT, 151 checkhandshake::DEFAULT_EXTENSIONS], 152 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK_KEX_MODES, 153 TLSProxy::Message::CLIENT, 154 checkhandshake::PSK_KEX_MODES_EXTENSION], 155 [TLSProxy::Message::MT_CLIENT_HELLO, TLSProxy::Message::EXT_PSK, 156 TLSProxy::Message::CLIENT, 157 checkhandshake::PSK_CLI_EXTENSION], 158 159 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_SUPPORTED_VERSIONS, 160 TLSProxy::Message::SERVER, 161 checkhandshake::DEFAULT_EXTENSIONS], 162 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_KEY_SHARE, 163 TLSProxy::Message::SERVER, 164 checkhandshake::KEY_SHARE_SRV_EXTENSION], 165 [TLSProxy::Message::MT_SERVER_HELLO, TLSProxy::Message::EXT_PSK, 166 TLSProxy::Message::SERVER, 167 checkhandshake::PSK_SRV_EXTENSION], 168 169 [TLSProxy::Message::MT_CERTIFICATE, TLSProxy::Message::EXT_STATUS_REQUEST, 170 TLSProxy::Message::SERVER, 171 checkhandshake::STATUS_REQUEST_SRV_EXTENSION], 172 [0,0,0,0] 173 ); 174 175 use constant { 176 DELETE_EXTENSION => 0, 177 EMPTY_EXTENSION => 1, 178 NON_DHE_KEX_MODE_ONLY => 2, 179 DHE_KEX_MODE_ONLY => 3, 180 UNKNOWN_KEX_MODES => 4, 181 BOTH_KEX_MODES => 5 182 }; 183 184 my $proxy = TLSProxy::Proxy->new( 185 undef, 186 cmdstr(app(["openssl"]), display => 1), 187 srctop_file("apps", "server.pem"), 188 (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE}) 189 ); 190 191 #Test 1: First get a session 192 (undef, my $session) = tempfile(); 193 $proxy->clientflags("-sess_out ".$session); 194 $proxy->serverflags("-servername localhost"); 195 $proxy->sessionfile($session); 196 $proxy->start() or plan skip_all => "Unable to start up Proxy for tests"; 197 plan tests => 11; 198 ok(TLSProxy::Message->success(), "Initial connection"); 199 200 #Test 2: Attempt a resume with no kex modes extension. Should fail (server 201 # MUST abort handshake with pre_shared key and no psk_kex_modes) 202 $proxy->clear(); 203 $proxy->clientflags("-sess_in ".$session); 204 my $testtype = DELETE_EXTENSION; 205 $proxy->filter(\&modify_kex_modes_filter); 206 $proxy->start(); 207 ok(TLSProxy::Message->fail(), "Resume with no kex modes"); 208 209 #Test 3: Attempt a resume with empty kex modes extension. Should fail (empty 210 # extension is invalid) 211 $proxy->clear(); 212 $proxy->clientflags("-sess_in ".$session); 213 $testtype = EMPTY_EXTENSION; 214 $proxy->start(); 215 ok(TLSProxy::Message->fail(), "Resume with empty kex modes"); 216 217 #Test 4: Attempt a resume with non-dhe kex mode only. Should resume without a 218 # key_share 219 $proxy->clear(); 220 $proxy->clientflags("-allow_no_dhe_kex -sess_in ".$session); 221 $proxy->serverflags("-allow_no_dhe_kex"); 222 $testtype = NON_DHE_KEX_MODE_ONLY; 223 $proxy->start(); 224 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 225 checkhandshake::DEFAULT_EXTENSIONS 226 | checkhandshake::PSK_KEX_MODES_EXTENSION 227 | checkhandshake::PSK_CLI_EXTENSION 228 | checkhandshake::PSK_SRV_EXTENSION, 229 "Resume with non-dhe kex mode"); 230 231 #Test 5: Attempt a resume with dhe kex mode only. Should resume with a key_share 232 $proxy->clear(); 233 $proxy->clientflags("-sess_in ".$session); 234 $testtype = DHE_KEX_MODE_ONLY; 235 $proxy->start(); 236 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 237 checkhandshake::DEFAULT_EXTENSIONS 238 | checkhandshake::PSK_KEX_MODES_EXTENSION 239 | checkhandshake::KEY_SHARE_SRV_EXTENSION 240 | checkhandshake::PSK_CLI_EXTENSION 241 | checkhandshake::PSK_SRV_EXTENSION, 242 "Resume with non-dhe kex mode"); 243 244 #Test 6: Attempt a resume with only unrecognised kex modes. Should not resume 245 # but rather fall back to full handshake 246 $proxy->clear(); 247 $proxy->clientflags("-sess_in ".$session); 248 $testtype = UNKNOWN_KEX_MODES; 249 $proxy->start(); 250 checkhandshake($proxy, checkhandshake::DEFAULT_HANDSHAKE, 251 checkhandshake::DEFAULT_EXTENSIONS 252 | checkhandshake::PSK_KEX_MODES_EXTENSION 253 | checkhandshake::KEY_SHARE_SRV_EXTENSION 254 | checkhandshake::PSK_CLI_EXTENSION, 255 "Resume with unrecognized kex mode"); 256 257 #Test 7: Attempt a resume with both non-dhe and dhe kex mode. Should resume with 258 # a key_share 259 $proxy->clear(); 260 $proxy->clientflags("-sess_in ".$session); 261 $testtype = BOTH_KEX_MODES; 262 $proxy->start(); 263 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 264 checkhandshake::DEFAULT_EXTENSIONS 265 | checkhandshake::PSK_KEX_MODES_EXTENSION 266 | checkhandshake::KEY_SHARE_SRV_EXTENSION 267 | checkhandshake::PSK_CLI_EXTENSION 268 | checkhandshake::PSK_SRV_EXTENSION, 269 "Resume with non-dhe kex mode"); 270 271 #Test 8: Attempt a resume with both non-dhe and dhe kex mode, but unacceptable 272 # initial key_share. Should resume with a key_share following an HRR 273 $proxy->clear(); 274 $proxy->clientflags("-sess_in ".$session); 275 $proxy->serverflags("-curves P-256"); 276 $testtype = BOTH_KEX_MODES; 277 $proxy->start(); 278 checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE, 279 checkhandshake::DEFAULT_EXTENSIONS 280 | checkhandshake::PSK_KEX_MODES_EXTENSION 281 | checkhandshake::KEY_SHARE_SRV_EXTENSION 282 | checkhandshake::KEY_SHARE_HRR_EXTENSION 283 | checkhandshake::PSK_CLI_EXTENSION 284 | checkhandshake::PSK_SRV_EXTENSION, 285 "Resume with both kex modes and HRR"); 286 287 #Test 9: Attempt a resume with dhe kex mode only and an unacceptable initial 288 # key_share. Should resume with a key_share following an HRR 289 $proxy->clear(); 290 $proxy->clientflags("-sess_in ".$session); 291 $proxy->serverflags("-curves P-256"); 292 $testtype = DHE_KEX_MODE_ONLY; 293 $proxy->start(); 294 checkhandshake($proxy, checkhandshake::HRR_RESUME_HANDSHAKE, 295 checkhandshake::DEFAULT_EXTENSIONS 296 | checkhandshake::PSK_KEX_MODES_EXTENSION 297 | checkhandshake::KEY_SHARE_SRV_EXTENSION 298 | checkhandshake::KEY_SHARE_HRR_EXTENSION 299 | checkhandshake::PSK_CLI_EXTENSION 300 | checkhandshake::PSK_SRV_EXTENSION, 301 "Resume with dhe kex mode and HRR"); 302 303 #Test 10: Attempt a resume with both non-dhe and dhe kex mode, unacceptable 304 # initial key_share and no overlapping groups. Should resume without a 305 # key_share 306 $proxy->clear(); 307 $proxy->clientflags("-allow_no_dhe_kex -curves P-384 -sess_in ".$session); 308 $proxy->serverflags("-allow_no_dhe_kex -curves P-256"); 309 $testtype = BOTH_KEX_MODES; 310 $proxy->start(); 311 checkhandshake($proxy, checkhandshake::RESUME_HANDSHAKE, 312 checkhandshake::DEFAULT_EXTENSIONS 313 | checkhandshake::PSK_KEX_MODES_EXTENSION 314 | checkhandshake::PSK_CLI_EXTENSION 315 | checkhandshake::PSK_SRV_EXTENSION, 316 "Resume with both kex modes, no overlapping groups"); 317 318 #Test 11: Attempt a resume with dhe kex mode only, unacceptable 319 # initial key_share and no overlapping groups. Should fail 320 $proxy->clear(); 321 $proxy->clientflags("-curves P-384 -sess_in ".$session); 322 $proxy->serverflags("-curves P-256"); 323 $testtype = DHE_KEX_MODE_ONLY; 324 $proxy->start(); 325 ok(TLSProxy::Message->fail(), "Resume with dhe kex mode, no overlapping groups"); 326 327 unlink $session; 328 329 sub modify_kex_modes_filter 330 { 331 my $proxy = shift; 332 333 # We're only interested in the initial ClientHello 334 return if ($proxy->flight != 0); 335 336 foreach my $message (@{$proxy->message_list}) { 337 if ($message->mt == TLSProxy::Message::MT_CLIENT_HELLO) { 338 my $ext; 339 340 if ($testtype == EMPTY_EXTENSION) { 341 $ext = pack "C", 342 0x00; #List length 343 } elsif ($testtype == NON_DHE_KEX_MODE_ONLY) { 344 $ext = pack "C2", 345 0x01, #List length 346 0x00; #psk_ke 347 } elsif ($testtype == DHE_KEX_MODE_ONLY) { 348 $ext = pack "C2", 349 0x01, #List length 350 0x01; #psk_dhe_ke 351 } elsif ($testtype == UNKNOWN_KEX_MODES) { 352 $ext = pack "C3", 353 0x02, #List length 354 0xfe, #unknown 355 0xff; #unknown 356 } elsif ($testtype == BOTH_KEX_MODES) { 357 #We deliberately list psk_ke first...should still use psk_dhe_ke 358 $ext = pack "C3", 359 0x02, #List length 360 0x00, #psk_ke 361 0x01; #psk_dhe_ke 362 } 363 364 if ($testtype == DELETE_EXTENSION) { 365 $message->delete_extension( 366 TLSProxy::Message::EXT_PSK_KEX_MODES); 367 } else { 368 $message->set_extension( 369 TLSProxy::Message::EXT_PSK_KEX_MODES, $ext); 370 } 371 372 $message->repack(); 373 } 374 } 375 } 376
Indexes created Thu Apr 23 00:23:13 UTC 2026