hardware revision 1.3 
1NetBSD/atari 1.2 runs on a TT030 and a Falcon. An FPU is not required. The
2minimum amount of RAM required is 4Mb.
3
4Here is a table of recommended HD partition sizes for a full install:
5	partition:	advise,	with X,	needed,	with X
6	root (/)	15M	15M	10M	10M
7	user (/usr)	65M	100M	45M 	80M
8	swap		----- 2M for every M ram -----
9	local (/local)	up to you
10
11As you may note the recommended size of /usr is 20M greater than
12needed. This is to leave room for a kernel source and compile tree
13as you will probably want to compile your own kernel. (GENERIC is
14large and bulky to accommodate all people, BOOT is small and might
15not have all the features you want).
16
17Supported devices include:
18	- The buildin SCSI host adapter
19		- Should support most SCSI-drives. The drives that are
20		  currently tested are:
21			MAXTOR 7245S, MAXTOR 7080S, SEAGATE ST157N
22		- Should support most tape drives. The drives that are
23		  currently tested are:
24			TANDBERG 3600
25		- Should support most CD-ROM drives.
26		- Should support most ZIP/MO drives.
27	- The buildin video controller
28	- The building (720Kb/1.44Mb) floppydrive
29	- The serial2/modem2 ports
30	- The Falcon FX memory expansion
31	- The atari mouse
32	- A 3-button mouse
33	- The parallel printer
34
35If its not on this list, there is probably no support for it in this release.
36