. .Nx*M \*V will run on most HP 9000/300- and 400-series machines. The smallest amount of RAM that has been tested is 4 MB. If you wish to run X, more RAM is recommended.
p Here is a table of recommended HD partition sizes for a full install: l -column -offset indent Partition Suggested Needed t Partition Ta Suggested Ta Needed t root (/) Ta "25 MB" Ta "15 MB" t /usr Ta "150 MB" Ta "100 MB" t /var Ta "20 MB" Ta "5 MB" t swap Ta Em "2-3 *RAM" Ta 6 MB .El .(item -offset indent Anything else is up to you! .item)
p .(Note The hp300 installation procedure uses a `miniroot' filesystem which is placed into the swap area of the disk. The swap partition must be large enough to hold this miniroot image. .Note) . .Ss2 Supported hardware .(bullet -offset indent CPUs .(bullet -compact 68020-based: 318, 319, 320, 330, and 350. t 68030-based: 340, 345, 360, 370, 375, and 400 [1]. t 68040-based: 380, 425 [1], and 433 [1]. .bullet) t Disks .(bullet -compact HP-IB/CS80: 7912, 7914, 7933, 7936, 7937, 7945, 7957, 7958, 7959, 2200, and 2203. t SCSI-I [2], including magneto-optical and CD-ROM. .bullet) t Tape drives .(bullet -compact Low-density HP-IB/CS80 cartridge: 7914, 7946, and 9144. t High-density HP-IB/CS80 cartridge: 9145. t HP-IB/CS80 1/2": 7974A, 7978A/B, 7979A, 7980A, and 7980XC. t SCSI: HP DAT, Exabyte, and SCSI QIC drives such as the Archive Viper. .bullet) t RS232 interfaces .(bullet -compact 98644 built-in single port (dca). t 98642 4-port (dcm). t 98638 8-port (dcm). .bullet) t Network interfaces .(bullet -compact 98643 built-in and add-on LAN cards. .bullet) t Displays .(bullet -compact 98544, 98545, and 98547 color and monochrome Topcat. t 98548, 98549, and 98550 color and monochrome Catseye. t 98700 and 98710 Gatorbox. t 98720 and 98721 Renaissance. t 98730 and 98731 DaVinci. t A1096A monochrome Hyperion. .bullet) t Input devices .(bullet -compact General interface supporting all HIL devices: keyboard, 2 and 3 button mice [3], and ID module. .bullet) t Miscellaneous .(bullet -compact Battery-backed real-time clock. t 98624 built-in HP-IB interface. t 98625A and 98625B `fast' HP-IB interface. t 98658A built-in and add-on SCSI interface. t Printers and plotters on RS232 and HP-IB. t SCSI autochanger. .bullet) .bullet)
p .(tag [1] -offset indent t [1] 400-series machines configured for Domain/OS are not fully supported. Notably, the keyboard doesn't work and the ROMs must be in `HP-UX mode'. t [2] SCSI-II drives are known to work, though this may require changing a jumper on some drives. See your disk's documentation for details. t [3] Serial mice connected to a `HIL to quad' converter are also known to work.
p If it's not on this list, there is no official support for it in this release.