hardware revision 1.2 
1	$NetBSD: hardware,v 1.2 1998/01/09 18:47:53 perry Exp $	
2
3Hardware supported by NetBSD/vax _VER includes (but may not be limited to): 
4
5	CPU types:
6
7		VAX 11/750, VAX 11/78{0,5}, VAX 8200/8250/8300/8350,
8		VAX 8600/8650, MicroVAX II, MicroVAX III, 
9		MicroVAX 3600/3800/3900, MicroVAX 3300/3400/3500,
10		MicroVAX 2000/VAXstation 2000 and some VAXstation 3100.
11
12	Networking:
13		DEUNA/DELUA Unibus ethernet, DEQNA/DELQA Q22 bus ethernet
14		and LANCE chip where available.
15
16	Serial lines:
17		DHU11/DHV11/DL11/DLV11/DZ11/DZQ11/DZV11 Unibus/Q22 bus
18		asynchronous lines and DZ11-compatible lines on 
19		VAXstations.
20
21	Disks:
22		UDA50 Unibus MSCP controller, KDA50/RQDX1/2/3 Q22 bus
23		MSCP controller, KDB50 BI-bus MSCP controller, MFM and
24		SCSI controllers on VAXstations, RP04/05/06/07 and
25		RM02/03/05/80 Massbus disks, and Console RL02 on 
26		VAX 8600. Some third-party controllers are also
27		known to work, other do not.
28
29	Tapes:
30		TMSCP on Q22 bus (TK50/70), SCSI tapes on VAXstations.
31
32The minimal configuration requires 2M of RAM and ~40MB of disk space,
33but the installation requires at least 4MB RAM and you probably do
34not want to run with anything less than that.
35
36Here is a table of recommended HD partition sizes for a full install:
37	partition:	advise		needed
38	root (/)	20M		10M
39	user (/usr)	80M		45M
40	swap		(2 or 3 * RAM)
41	Anything else is up to you!
42