mkimage revision 1.70
1 #!/bin/sh 2 # $NetBSD: mkimage,v 1.70 2019/10/02 11:16:00 maya Exp $ 3 # 4 # Copyright (c) 2013, 2014 The NetBSD Foundation, Inc. 5 # All rights reserved. 6 # 7 # This code is derived from software contributed to The NetBSD Foundation 8 # by Christos Zoulas. 9 # 10 # Redistribution and use in source and binary forms, with or without 11 # modification, are permitted provided that the following conditions 12 # are met: 13 # 1. Redistributions of source code must retain the above copyright 14 # notice, this list of conditions and the following disclaimer. 15 # 2. Redistributions in binary form must reproduce the above copyright 16 # notice, this list of conditions and the following disclaimer in the 17 # documentation and/or other materials provided with the distribution. 18 # 3. Neither the name of The NetBSD Foundation nor the names of its 19 # contributors may be used to endorse or promote products derived 20 # from this software without specific prior written permission. 21 # 22 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 23 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 24 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 25 # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 26 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 32 # POSSIBILITY OF SUCH DAMAGE. 33 # 34 35 # 36 # Makes a bootable image for the host architecture given. 37 # The host specific functions are pulled in from a /bin/sh script in the 38 # "conf" directory, and is expected to provide the following shell 39 # functions, which are called in the following order: 40 # 41 # - make_fstab: Creates the host's /etc/fstab with / on ${rootdev}. 42 # If -m is given, a number of directories are put on a tmpfs RAM disk 43 # - customize: After unpacking the sets, this gets the system to 44 # a working state, e. g. by setting up /etc/rc.conf and /dev 45 # - populate: Add common goods like kernel and bootloader 46 # - make_label: Prints disklabel to stdout 47 # 48 49 set -e 50 51 DIR="$(cd "$(dirname "$0")" && pwd)" 52 PROG="$(basename "$0")" 53 54 MAKE=${TOOL_MAKE:-make} 55 DISKLABEL=${TOOL_DISKLABEL:-disklabel} 56 FDISK=${TOOL_FDISK:-fdisk} 57 MAKEFS=${TOOL_MAKEFS:-makefs} 58 MTREE=${TOOL_MTREE:-mtree} 59 INSTALLBOOT=${TOOL_INSTALLBOOT:-installboot} 60 MKUBOOTIMAGE=${TOOL_MKUBOOTIMAGE:-mkubootimage} 61 GZIP_CMD=${TOOL_GZIP:-gzip} # ${GZIP} is special to gzip(1) 62 63 src="/usr/src" 64 sets="base comp etc games man misc modules rescue tests text" 65 xsets="xbase xcomp xetc xfont xserver" 66 minfree="10%" 67 bar="===" 68 69 tmp="$(mktemp -d "${TMPDIR:-/tmp}/$PROG.XXXXXX")" 70 mnt="${tmp}/mnt" 71 mkdir -p "${mnt}/etc" "${mnt}/dev" 72 73 trap "cleanup" 0 1 2 3 15 74 75 cleanup() { 76 case "$tmp" in 77 "${TMPDIR:-/tmp}/$PROG."*) rm -fr "$tmp";; 78 esac 79 } 80 81 fail() { 82 IFS=' ' 83 echo >&2 "${PROG}: $*" 84 exit 1 85 } 86 87 getsize() { 88 set -- $(ls -l $1) 89 echo $5 90 } 91 92 getsectors() { 93 case "$1" in 94 *g) 95 m=1073741824 96 v=${1%g} 97 ;; 98 *m) 99 m=1048576 100 v=${1%m} 101 ;; 102 *k) 103 m=1024 104 v=${1%k} 105 ;; 106 *[0-9b]) 107 m=1 108 v=${1%b} 109 ;; 110 esac 111 echo $((m * v / 512)) 112 } 113 114 usage() { 115 cat << EOF 1>&2 116 Usage: $PROG -h <host-arch> [-bdmx] [-B <byte-order>] [-K <kerneldir>] [-S <srcdir>] [-D <destdir>] [-c <custom-files-dir>] [-s <Mb size>] [<image>] 117 118 -b Boot only, no sets loaded 119 -r root device kind (sd, wd, ld) 120 -d Add the debug sets 121 -m Optimize the OS installation to mimimize disk writes for SSDs 122 -x Load the X sets too, not just the base ones 123 EOF 124 exit 1 125 } 126 127 # First pass for options to get the host and src directories 128 OPTS="B:D:K:S:bc:dh:mr:s:x" 129 while getopts "$OPTS" f 130 do 131 case $f in 132 h) h="$OPTARG";; 133 S) src="$OPTARG";; 134 *) ;; 135 esac 136 done 137 138 if [ -z "$h" ] 139 then 140 usage 141 fi 142 143 if [ ! -f "${DIR}/conf/${h}.conf" ] 144 then 145 echo $PROG: ${DIR}/conf/${h}.conf is not present 1>&2 146 exit 1 147 fi 148 149 resize=false 150 151 . "${DIR}/conf/${h}.conf" 152 release="/usr/obj/${MACHINE}/release" 153 154 selected_sets="$sets" 155 dsets_p=false 156 xsets_p=false 157 minwrites=false 158 rootdev=ld 159 endian= 160 161 OPTIND=1 162 while getopts "$OPTS" f 163 do 164 case $f in 165 B) endian="-B $OPTARG";; 166 D) release="$OPTARG";; 167 K) kernel="$OPTARG";; 168 S) ;; 169 b) bootonly=true;; 170 d) dsets_p=true 171 selected_sets="$selected_sets debug" 172 if $xsets_p; then 173 selected_sets="$selected_sets xdebug" 174 fi 175 ;; 176 c) custom="$OPTARG";; 177 h) ;; 178 m) minwrites=true;; 179 r) rootdev="$OPTARG";; 180 s) size="$OPTARG";; 181 x) xsets_p=true 182 selected_sets="$selected_sets $xsets" 183 if $dsets_p; then 184 selected_sets="$selected_sets xdebug" 185 fi 186 ;; 187 *) usage;; 188 esac 189 done 190 191 shift $(( $OPTIND - 1 )) 192 if [ -n "$1" ]; then 193 # take the next argument as being the image name 194 image="$1" 195 shift 196 fi 197 198 case "$image" in 199 *.gz) compress=true; image="${image%.gz}";; 200 *) compress=false;; 201 esac 202 203 if [ -z "${bootonly}" ]; then 204 echo ${bar} configuring sets ${bar} 205 (cat "${release}/etc/mtree/NetBSD.dist" 206 for i in $selected_sets; do 207 s="${release}/etc/mtree/set.$i" 208 if [ -f "$s" ]; then 209 cat "$s" 210 fi 211 done) > "$tmp/selected_sets" 212 fi 213 214 make_fstab 215 customize 216 populate 217 218 if [ -n "${msdosid}" ]; then 219 echo ${bar} Populating msdos filesystem ${bar} 220 ${MAKEFS} -N ${release}/etc -t msdos -o volume_label=NETBSD \ 221 -O $((${init} / 2))m -s $((${boot} / 2))m \ 222 ${image} ${mnt}/boot 223 fi 224 225 if [ -z "${bootonly}" ]; then 226 echo ${bar} Populating ffs filesystem ${bar} 227 ${MAKEFS} -rx ${endian} -N ${release}/etc -t ffs \ 228 -O ${ffsoffset} \ 229 -o d=4096,f=8192,b=65536 -b $((${extra}))m \ 230 -F "$tmp/selected_sets" ${image} "${release}" "${mnt}" 231 fi 232 233 if [ "${size}" = 0 ]; then 234 size="$(getsize "${image}")" 235 fi 236 newsize=$((${size} / 2 / 1024)) 237 compare=$((${newsize} * 2 * 1024)) 238 while [ "${compare}" != "${size}" ] 239 do 240 size="$((size + size - compare))" 241 newsize="$((${size} / 2 / 1024))" 242 compare="$((${newsize} * 2 * 1024))" 243 done 244 245 if [ -n "${msdosid}" ]; then 246 echo ${bar} Running fdisk ${bar} 247 initsecs=$((${init} * 1024)) 248 bootsecs=$((${boot} * 1024)) 249 ${FDISK} -f -i ${image} 250 ${FDISK} -f -a -u -0 -s ${msdosid}/${initsecs}/${bootsecs} -F ${image} 251 if [ -z "${bootonly}" ]; then 252 ffsstart="$(getsectors ${ffsoffset})" 253 imagesize="$(getsize "${image}")" 254 imagesecs="$(getsectors ${imagesize})" 255 ffssize="$(expr ${imagesecs} - ${ffsstart})" 256 ${FDISK} -f -u -1 -s 169/${ffsstart}/${ffssize} -F ${image} 257 fi 258 259 echo ${bar} Adding label ${bar} 260 make_label > ${tmp}/label 261 ${DISKLABEL} -R -F ${image} ${tmp}/label 262 elif [ -n "${netbsdid}" ]; then 263 echo ${bar} Adding label ${bar} 264 make_label > ${tmp}/label 265 ${DISKLABEL} -R -F ${image} ${tmp}/label 266 267 echo ${bar} Running fdisk ${bar} 268 ${FDISK} -f -i ${image} 269 ${FDISK} -f -a -u -0 -s 169/${init} ${image} 270 ${INSTALLBOOT} -f -v ${image} ${release}/usr/mdec/bootxx_ffsv1 271 fi 272 273 if $compress; then 274 echo ${bar} Compressing image ${bar} 275 rm -f "${image}.gz" 276 ${GZIP_CMD} -9 ${image} 277 image="${image}.gz" 278 fi 279 280 echo ${bar} Image is ${image} ${bar} 281
Indexes created Wed Oct 01 15:09:59 GMT 2025