xref: /src/doc/3RDPARTY

#	$NetBSD: 3RDPARTY,v 1.570 2007/11/17 13:53:51 jmmv Exp $
#
# This file contains a list of the software that has been integrated into
# NetBSD where we are not the primary maintainer.
#
# When you make changes to this software, be sure to discuss it with the
# maintainer and contribute your patches.  Divergence from the official
# sources is not desirable, and should be avoided as much as possible.
#
# When importing, please deal with the RCS IDs in this way:
#   1. Preserve the RCS IDs in the files by removing the $ signs from
#      the IDs before you do the import.
#   2. After the import, add NetBSD RCS IDs to all of the files.
#
# A few notes on the format of this file (for the benefit of
# 3dparty2html):
#
# 1.) Any line whose first non-whitespace character is # is a comment
# 2.) Entries are separated by blank lines
# 3.) Every package needs at least the following entries: Package,
#     Version, Current Vers, and Maintainer.
# 4.) Where a field has multiple lines of information, the field tag
#     should be repeated on each line, except:
# 5.) The Notes: field tag should appear on a line by itself.  All
#     remaining lines until the end of the record are notes.

Package:	acpica
Version:	20060217
Current Vers:	20060912
Maintainer:	INTEL
Archive Site:	http://developer.intel.com/technology/IAPC/acpi/downloads.htm
Home Page:	http://developer.intel.com/technology/IAPC/acpi/
Mailing List:	acpi-devel@lists.sourceforge.net
License:	http://developer.intel.com/technology/iapc/acpi/license2.htm
Responsible:	kochi
Notes:
The sources were integrated into src/sys/dev/acpi/acpica/Subsystem.
Please read src/sys/dev/acpi/acpica/README before any modification.

Package:	am-utils [amd]
Version:	6.1.3
Current Vers:	6.1.3
Maintainer:	Erez Zadok <ezk@cs.columbia.edu>
Archive Site:	ftp://ftp.am-utils.org/pub/am-utils/
Home Page:	http://www.am-utils.org/
Mailing List:	am-utils
Responsible:	christos
License:	BSD (4-clause)
Notes:
Amd2netbsd script to convert to BSD make system and remove unneeded files.
Fix symbolic links before import.
Check src/usr.sbin/amd/include/config.h is correct after import.

Package:	Automated Testing Framework (ATF)
Version:	0.3
Current Vers:	0.3
Maintainer:	Julio M. Merino Vidal <jmmv@NetBSD.org>
Archive site:	ftp://ftp.NetBSD.org/pub/NetBSD/misc/jmmv/atf/
Home page:	http://www.NetBSD.org/~jmmv/atf/
Mailing List:	atf-devel@NetBSD.org
Responsible:	jmmv
License:	The NetBSD Foundation's license (BSD 4-clause)
Notes:
The source files are in dist/atf.
Given that the primary goal of ATF is to provide a testing framework for
NetBSD, no local changes should be ever needed.  Always direct them to the
maintainer for integration in official releases.

Package:	ath-hal
Version:	0.9.17.2
Current Vers:	0.9.17.2
Maintainer:	Sam Leffler <sam@errno.com>
Archive Site:	none
Home Page:	none
Mailing List:	none
Responsible:	sam, dyoung, gdamore
License:	Redistribution without changes (binary only)
Notes:
The HAL is binary only, and located in src/sys/contrib/dev/ath

Package:	bc
Version:	1.06
Current Vers:	1.06
Maintainer:	Phil Nelson <phil@cs.wwu.edu>
Archive Site:	ftp://ftp.gnu.org/gnu/bc/
Home Page:	http://www.gnu.org/software/bc/
Mailing List:	bug-bc@gnu.org
Responsible:	phil, simonb
License:	GPLv2, LGPGv2.1
Notes:
bc includes dc, both of which are in the NetBSD tree.

Package:	bind/named
Version:	libc/includes: 9.4.1, bind: 9.4.1-P1
Current Vers:	9.4.1-P1
Maintainer:	Paul Vixie <vixie@vix.com>
Archive Site:	ftp://ftp.isc.org/isc/bind9/
Home Page:	http://www.isc.org/sw/bind/
Mailing List:
Responsible:	vixie, christos
License:	BSD-like (2-clause)
Notes:
First bind2netbsd script to import into src/dist/bind.
The Makefiles in src/usr.sbin/bind are not handled by the script.
Then binclude4netbsd script to import into src/usr.sbin/bind/include.
Then include4netbsd script to import into src/include.
Then libc4netbsd script to update the resolver in libc.
Todo[1]: Update libresolv if needed.
Todo[2]: A few files in libc/net were imported in the ISC branch but now
	 they are too different or do not exist anymore:
	    gethnamaddr.c getnetent.c getnetnamadr.c sethostent.c
	 Others like getaddrinfo.c could be merged with isc, but it seems
	 that ours is from a more recent version of KAME?
Todo[3]: net/base64.c is imported from bind but should be moved from net
	 to isc/base64.c.
Todo[4]: Re-entrant functions of net/*

Package:	binutils
Version:	2.16.1
Current Vers:	2.17
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/binutils/
Home Page:	http://www.gnu.org/software/binutils/
Mailing List:	bug-gnu-utils@gnu.org
Responsible:	thorpej, mrg
License:	GPLv2, LGPLv2, BSD
Notes:

Package:	bsd-family-tree
Version:	1.116
Current Vers:	1.116
Maintainer:	n/a
Archive Site:	http://cvsweb.freebsd.org/src/share/misc/bsd-family-tree
Home Page:	http://cvsweb.freebsd.org/src/share/misc/bsd-family-tree
Mailing List:
Responsible:	xtraeme
License:	See URL above.
Notes:

Package:	bzip2
Version:	1.0.2
Current Vers:	1.0.4
Maintainer:	Julian Seward <jseward@acm.org>
Archive Site:	http://sources.redhat.com/bzip2/
Home Page:	http://www.bzip.org/
Mailing List:
Responsible:
License:	BSD (4-clause)
Notes:
See /usr/src/dist/bzip2/bzip2netbsd for update instructions.

Package:	Citrus XPG4DL
Version:	?
Current Vers:	?
Maintainer:	Citrus
Archive Site:	http://citrus.bsdclub.org/
Home Page:	http://citrus.bsdclub.org/
Mailing List:	bsd-locale@hauN.org
Responsible:	tshiozak
License:	Ambiguous. Either BSD or Perl Artistic License
		See http://citrus.bsdclub.org/#pol_license for more info.
Notes:
language C multilingualization support suite using wchar_t and other standards.
The main development playground of Citrus is in NetBSD CVS, so you don't
need to look for other CVS tree (like citrus CVS tree)
main trunc has Citrus code in the following places:
- src/lib/libc/locale, LC_CTYPE: single/multibyte support
- src/lib/libintl: GNU libc compatible gettext(3) implementation.
- src/lib/libc/citrus: multibyte LC_CTYPE handling and iconv(3) lower layer
- src/lib/libc/iconv: iconv(3)

Package:	cron
Version:	3.0
Current Vers:	4.3
Maintainer:	Paul Vixie <vixie@vix.com>
Archive Site:	ftp://ftp.isc.org/isc/cron/
Home Page:
Mailing List:
Responsible:
License:	BSD-like
Notes:

Package:	cvs
Version:	1.11.22
Current Vers:	1.11.22/1.12.13
Maintainer:	cvshome
Archive Site:	http://ftp.gnu.org/non-gnu/cvs/
Home Page:	http://cvs.nongnu.org/
Mailing List:	bug-cvs@gnu.org
Responsible:	christos, wiz
License:	GPLv1, LGPLv2
Notes:
Use src/gnu/dist/cvs/cvs2netbsd for preparing the source tree
for the import.
Do not forget to update gnu/usr.bin/cvs/include/config.h to match
gnu/dist/cvs/config.h.in.
If you want to upgrade to 1.12.XX, please talk to christos first.
I have merged all the changes already.

Package:	db
Version:	1.85
Current Vers:	1.86/4.4.20
Maintainer:	Keith Bostic <bostic@vangogh.cs.berkeley.edu>
Archive Site:	http://www.sleepycat.com/download/index.shtml
Home Page:	http://www.sleepycat.com/products/db.shtml
Mailing List:
Responsible:
License:	BSD or specific SleepyCat license
Notes:
Note that we cannot use db 2.x for license reasons.
Three bug fixes against 1.85 sent back to bostic.  Changes to
man/recno.3, hash/hsearch.c, and hash/ndbm.c (serious).
Import of DB 1.85 was done via a sh script which converted the
distribution into the netbsd format.  The script can be found in
src/lib/libc/db/db2netbsd.

Package:	dhcp
Version:	3.0.3
Current Vers:	3.0.5
Maintainer:	mellon
Archive Site:	ftp://ftp.isc.org/isc/dhcp/
Home Page:	http://www.isc.org/sw/dhcp/
Mailing List:	dhcp-server@isc.org
Mailing List:	dhcp-client@isc.org
Mailing List:	dhcp-announce@isc.org
Mailing List:	dhcp-bugs@isc.org
Responsible:	mellon
License:	BSD (3-clause)
Notes:
No changes for NetBSD integration - just import the new distribution on
top of the current tree.

Package:	diffutils
Version:	2.8.1
Current Vers:	2.8.1
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/diffutils/
Home Page:	http://www.gnu.org/software/diffutils/
Mailing List:	bug-gnu-utils@gnu.org
Responsible:	wiz
License:	GPLv2
Notes:
Use src/gnu/dist/diffutils/diffutils2netbsd for preparing the source tree
for the import.

Package:	gdtoa
Version:	2005-09-23
Current Vers:	2005-09-23
Maintainer:	David M. Gay <dmg@acm.org>
Archive Site:	ftp://netlib.lucent.com/netlib/fp/
Home Page:	http://www.netlib.org/fp/
Mailing List:	none
Responsible:	kleink
License:	BSD-like
Notes:
Test suite not integrated at this time.
No hexadecimal floating-point string conversion for VAX FP yet.
Only double-precision addressed at this time.

Package:	file
Version:	4.21
Current Vers:	4.21
Maintainer:	Christos Zoulas <christos@zoulas.com>
Archive Site:	ftp://ftp.astron.com/pub/file/
Home Page:
Mailing List:	file@mx.gw.com
Responsible:	christos, pooka
License:	BSD (2-clause)
Notes:

Package:	flex
Version:	2.5.4
Current Vers:	2.5.4a/2.5.33
Maintainer:	Vern Paxson <vern@ee.lbl.gov>
Archive Site:	ftp://ftp.gnu.org/gnu/non-gnu/flex/
Home Page:	http://lex.sourceforge.net/
Mailing List:
Responsible:	mikel
License:	BSD-like	
Notes:
flex 2.5.4a contains only copyright notice changes over version 2.5.4;
internally not even the version number changed.
Newer flex will be found in:
	http://sourceforge.net/projects/lex/

Package:	gcc
Version:	4.1.3-20070620
Current Vers:	4.2.2
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/gcc/
Home Page:	http://www.gnu.org/software/gcc/
Mailing List:	gcc-bugs@gnu.org
Responsible:	thorpej, mrg
License:	GPLv2, LGPLv2.1
Notes:
before importing:
	- delete all .cvsignore and .brik files
	- delete gcc/java gcc/ada libffi zlib boehm-gc libjava fastjar
	- delete all related testsuites
for GCC4:
	- delete all fortran and testsuites
	- update gcc/version.c for the NetBSD GCC date

Package:	gdb
Version:	5.3/6.4
Current Vers:	6.7
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/gdb/
Home Page:	http://www.gnu.org/software/gdb/
Mailing List:	bug-gdb@gnu.org
Responsible:	thorpej
License:	GPLv2, LGPLv2
Notes:
When updating GDB, it is imperative to test that:
	- Debugging of kernel cores ("target kvm") works correctly
	- Support for our kernel's remote serial debugging protocol
	  ("options KGDB") works correctly.

Package:	gettext
Version:	0.14.4
Current Vers:	0.17
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/gettext/
Home Page:	http://www.gnu.org/software/gettext/
Mailing List:	bug-gnu-utils@gnu.org
Responsible:
License:	GPLv2
Notes:
GNU gettext is used for userland tools like msgfmt(1) only.  For libintl,
we use BSD-licensed implementation from Citrus project (see entry for
"Citrus XPG4DL").  We hope to replace userland tools with BSD-licensed one.

Package:	gkermit
Version:	1.00
Current Vers:	1.00
Maintainer:	Kermit Project - Columbia University <kermit@columbia.edu>
Archive Site:	ftp://kermit.columbia.edu/kermit/archives/
Home Page:	http://www.columbia.edu/kermit/
Mailing List:
Responsible:	apb
License:	GPLv2
Notes:

Package:	grep
Version:	2.5.1
Current Vers:	2.5.1a
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/grep/
Home Page:	http://www.gnu.org/software/grep/
Mailing List:	bug-gnu-utils@gnu.org
Responsible:	simonb, wiz
License:	GPLv2
Notes:
Use src/gnu/dist/grep/grep2netbsd for preparing the source tree
for the import.
A non-gnu grep was imported into src/usr.bin/grep on 2 Jan 2004. It
needs some tuning before it can replace gnu grep.
	(cf.	http://www.vocito.com/downloads/software/grep/)

Package:	groff
Version:	1.19.2
Current Vers:	1.19.2
Maintainer:	Werner Lemberg/FSF
Archive Site:	ftp://ftp.gnu.org/gnu/groff/
Home Page:	http://www.gnu.org/software/groff/
Mailing List:	bug-groff@gnu.org
Responsible:	wiz
License:	GPLv2
Notes:
Use groff2netbsd from src/gnu/dist/groff to prepare the distribution
for import.

Package:	heimdal
Version:	0.6.2
Current Vers:	1.0.1
Maintainer:	Heimdal <heimdal@pdc.kth.se>
Archive Site:	ftp://ftp.pdc.kth.se/pub/heimdal/src/
Home Page:	http://www.pdc.kth.se/heimdal/
Mailing List:	heimdal-discuss@pdc.kth.se
Responsible:	joda, lha
License:	BSD
Notes:

Package:	hostapd
Version:	0.4.9
Current Vers:	0.4.9
Maintainer:	Jouni Malinen <jkmaline@cc.hut.fi>
Archive Site:	http://hostap.epitest.fi/releases/
Home Page:	http://hostap.epitest.fi/hostapd/
Mailing List:
Responsible:	None
License:	BSD or GPLv2
Notes:
See /usr/src/dist/hostapd/NetBSD-upgrade for update instructions.

Package:	hunt
Version:	2003-04-16
Current Vers:	2003-04-16
Maintainer:	Greg Couch <gregc@cgl.ucsf.edu>
Archive Site:	ftp://ftp.cgl.ucsf.edu/pub/hunt.shar.Z
Home Page:	http://www.cgl.ucsf.edu/home/gregc/oss.html
Responsible:	mrg
License:	BSD (3-clause)
Notes:

Package:	ipf
Version:	4.1.23
Current Vers:	4.1.23
Maintainer:	Darren Reed
Archive Site:	http://coombs.anu.edu.au/~avalon/
Home Page:	http://coombs.anu.edu.au/~avalon/
Mailing List:	ipfilter@postbox.anu.edu.au
Responsible:	darrenr, mike, martti
License:	BSD-based, see src/dist/ipf/IPFILTER.LICENSE
Notes:
ipf2netbsd should be used on a virgin ipfilter source tree.

Package:	ipsec-tools
Version:	(ipsec-tools head is NetBSD-current head)
Maintainer:	IPsec-Tools project <ipsec-tools-core@lists.sourceforge.net>
Archive Site:	http://ipsec-tools.sourceforge.net
Home Page:	http://ipsec-tools.sourceforge.net
Mailing List:	ipsec-tools-devel@lists.sourceforge.net
Responsible:	manu, vanhu, mgrooms
License:	BSD (3-clause)
Notes:
ipsec-tools is maintained within NetBSD src tree in src/crypto/dist/ipsec-tools
We don't run ipsec-tools' configure as part of the NetBSD build. configure
generated files are available in the NetBSD source tree at:
  src/lib/libipsec/config.h
  src/lib/libipsec/package_version.h
When configure.ac is updated, run the following:
  cd src/crypto/dist/ipsec-tools
  ./bootstrap
  ./configure --enable-adminport --enable-hybrid --enable-frag \
  	      --enable-natt --enable-dpd 
Then copy package_version.h to src/lib/libipsec and merge config.h with
src/lib/libipsec/config.h (it needs some manual tweaking)

NOTE: As NetBSD HEAD and ipsec-tools HEAD are just the same thing, 
NetBSD-current always contains latest ipsec-tools code. On the other hand,
ipsec-tools has stable branches (e.g.: ipsec-tools-0_7-branch), which 
are manually pulled up to NetBSD stable branches (e.g.: netbsd-4 is regularly
sync with ipsec-tools-0_7-branch)

Package:	KAME IPv6
Version:	KAME/NetBSD SNAP kit
Current Vers:	KAME/NetBSD SNAP kit (shipped every week)
Maintainer:	KAME Project <kame@kame.net>
Archive Site:	http://www.kame.net/
Home Page:	http://www.kame.net/
Mailing List:	snap-users@kame.net
Responsible:
License:	BSD (3-clause)
Notes:
IPv6 part is based on KAME/NetBSD142 SNAP as of early June 2000, with
more conservative implementation policy.
IPsec part is based on KAME/NetBSD14 SNAP as of 12 June 2000.
Please do not make too many diff-unfriendly changes (like indentation change,
KNF police).  We need to take diffs across KAME snapshots on upgrades.
To identify kernel version, check net.inet6.ip6.kame_version, or KAME_VERSION
in sys/netinet6/in6.h.  No script is available for upgrades.
"KAME" branch is used for kernel merge work purposes.
http://www.kame.net/dev/cvsweb.cgi/kame/COVERAGE has functionality comparison
among KAME/*BSD, *BSD-current and recent *BSD releases.

Package:	less
Version:	less394
Current Vers:	less409
Maintainer:	Mark Nudleman <markn@greenwoodsoftware.com>
Archive Site:	http://www.greenwoodsoftware.com/less/download.html
Home Page:	http://www.greenwoodsoftware.com/less/
Mailing List:
Responsible:	mrg
License:	BSD or GPLv2
Notes:
Many changes to make less act as more when invoked as more.  Beware.
Use the src/usr.bin/less/less2netbsd script to prepare source tree
for importation.  Run ./configure before hand to generate "defines.h".
Talk to mrg before importing any new version.  (less 381's configure
does not detect NetBSD has a sigset_t due to a bad test; this is fixed
by hand in defines.h.)

Package:	libarchive
Version:	2.2.6
Current Ves.:	2.2.6
Maintainer:	kientzle@freebsd.org
Archive Site:	http://people.freebsd.org/~kientzle/libarchive/
Home Page: 	http://people.freebsd.org/~kientzle/libarchive/
Responsible:	joerg
License:	BSD
Notes:
Distribution is stripped down to the relevant part. cpio is currently
not usable, so it was left out.

Package:	libcdk
Version:	4.9.9-20000407-myc3
Current Vers:	cdk-4.9.10-20000923
Maintainer:	mike@vexus.ca
Archive Site:	http://www.vexus.ca/products/CDK/
Home Page:	http://www.vexus.ca/products/CDK/
Responsible:	garbled
License:	BSD (4-clause)
Notes:
Initial port to netbsd curses was done by mycroft.  This is a heavily
modified version of the released CDK 4.9.9.  The current version has been
taken over by the Ncurses people, and has a number of changes to it.  It
might be worthwhile to import at some future date, but for now we should
leave it alone.  (garbled 1/4/2001)

Package:	libevent
Version:	1.0c
Current Vers:	1.3e
Maintainer:	Niels Provos <provos@citi.umich.edu>
Archive Site:	http://www.monkey.org/~provos/libevent/
Home Page:	http://www.monkey.org/~provos/libevent/
Responsible:	provos
License:	BSD (3/4-clause)
Notes:

Package:	libpcap
Version:	0.9.4
Current Vers:	0.9.5
Maintainer:	tcpdump-workers@tcpdump.org
Archive Site:	http://www.tcpdump.org/release/
Home Page:	http://www.tcpdump.org/
Mailing List:	tcpdump-workers@tcpdump.org
Responsible:	dyoung
License:	BSD (3/4-clause)
Notes:

Package:	libwrap
Version:	tcp_wrappers 7.6 w/ large amount of IPv6 changes
Current Vers:	tcp_wrappers 7.6-ipv6.1
Maintainer:	Wietse Venema <wietse@porcupine.org>
Archive Site:	ftp://ftp.porcupine.org/pub/security/
Home Page:	ftp://ftp.porcupine.org/pub/security/
Mailing List:
Responsible:	cjs
License:	BSD-like
Notes:
We import only libwrap (under src/lib), tcpdchk and tcpdmatch (both
under src/usr.sbin). We don't use tcpd; that functionality is built
into inetd. The provided libwrap2netbsd script handles just libwrap.

Package:	mopd
Version:	2.5.3
Current Vers:	2.5.3
Maintainer:	Mats O Jansson <maja@celsiustech.se>
Archive Site:	BROKEN	ftp://ftp.stacken.kth.se/pub/OS/NetBSD/mopd/
Home Page:	http://www.stacken.kth.se/~moj/mopd.html
Mailing List:
Responsible:	cjs
License:	BSD (4-clause)
Notes:
Delete the otherOS directory before importing.

Package:	nawk
Version:	2005-04-24
Current Vers:	2005-04-24
Maintainer:	Brian Kernighan <bwk@bell-labs.com> (Lucent Technologies)
Archive Site:	http://cm.bell-labs.com/who/bwk/
Home Page:	http://cm.bell-labs.com/who/bwk/
Mailing List:
Responsible:	jdolecek
License:	BSD-like
Notes:
Build maketab from nawk sources and generate proctab.c.
Remove buildwin.bat, mac.code, missing95.c, ytab.[ch], ytab?.bak, then import
to src/dist/nawk.

Package:	ndbootd
Version:	0.5
Current Vers:	0.5
Maintainer:	Matt Fredette <fredette@alum.mit.edu>
Archive Site:	BROKEN	http://mit.edu/fredette/www/ndbootd/
Home Page:	BROKEN	http://stuff.mit.edu/people/fredette/home.html
Responsible:	fredette
License:	BSD (4-clause)
Notes:
Run ./configure, save config.h, make distclean, rm all autoconf/automake
and ndbootd-raw.c.  Restore saved config.h, and force it to define
HAVE_STRICT_ALIGNMENT.  Fix RCS IDs, import.

Package:	ntp
Version:	4.2.4p2
Current Vers:	4.2.4p3
Maintainer:	David L. Mills <mills@udel.edu>
Archive Site:	ftp://ftp.udel.edu/pub/ntp/ntp4/
Home Page:	http://www.ntp.org/, http://ntp.isc.org/
Mailing List:
Responsible:	simonb, jonathan, kardel
License:	BSD-like
Notes:
See /usr/src/dist/ntp/ntp2netbsd for update instructions.

Package:	nvi
Version:	1.79
Current Vers:	1.79
Maintainer:	Keith Bostic <bostic@bsdi.com>
Archive Site:	ftp://ftp.bostic.com/pub/
Home Page:	http://www.bostic.com/vi/
Mailing List:
Responsible:	aymeric
License:	BSD (3/4-clause)
Notes:
We have lots of local bug fixes, and the point of importing 1.81.x would
be to get multibyte characters support. For now this means waiting for
additions in our libcurses.

Package:	OpenPAM
Version:	20050616
Current Vers:	20050616
Maintainer:	Dag-Erling Sm�rgrav <des@FreeBSD.org>
Archive Site:	http://www.openpam.org/
Home Page:	http://www.openpam.org/
Mailing List:
Responsible:	christos
License:	BSD (3-clause)
Notes:

Package:	OpenSSH
Version:	4.6
Current Vers:	4.6 / portable 4.6p1
Maintainer:	OpenSSH
Archive Site:	http://www.openssh.com/ftp.html
Home Page:	http://www.openssh.com/portable.html
Mailing List:	openssh-unix-announce@mindrot.org
Responsible:	thorpej, christos, elric
License:	BSD or more free. See src/crypto/dist/ssh/LICENSE
Notes:
imported from OpenBSD usr.bin/ssh (it is not from the portable OpenSSH)
into crypto/dist/openssh.  use openssh2netbsd before import.
local changes (should always try to bring them back to master openssh tree,
markus is very cooperative about it):
- default for PermitRootLogin is set to "no"
- IgnoreRootRhosts added
- look at login.conf to check valid user/access list
- krb5 support re-added
- hack in cipher.c #ifdef ACCS because we are missing EVP_acss
  when someone imports openssl, we can remove this.
- uidswap.c changed order of set{e,}{u,g}id so that it works on NetBSD
- added moduli from portable openssh
- added USE_PAM patches and auth_pam.[ch] from portable openssh
- always bump major when importing to avoid api problems.

Package:	OpenSSL
Version:	0.9.8e
Current Vers:	0.9.8g
Maintainer:	The OpenSSL Project
Archive Site:	ftp://ftp.openssl.org/source/
Home Page:	http://www.openssl.org/
Mailing List:	openssl-announce@openssl.org
Responsible:	mcr, thorpej, groo, christos, mjf
License:	OpenSSL and SSLeay license (both BSD-like)
Notes:
- Run openssl2netbsd to get rid of the RCSID identifiers
- run make in /usr/src/lib/libcrypto/man to regen man pages.

Package:	pdisk
Version:	0.8a2
Current Vers:	0.8a2
Maintainer:	Eryk Vershen <eryk@cfcl.com>
Archive Site:	http://cantaforda.com/cfcl/eryk/linux/pdisk/index.html
Home Page:	http://cantaforda.com/cfcl/eryk/linux/pdisk/index.html
Mailing List:
Responsible:	dbj
License:	BSD-like
Notes:
This is the disk partition utility used by Apple's mkLinux and osX
It is imported into dist/pdisk, with a reachover makefile in
src/sbin/pdisk builds for macppc and mac68k.

Package:	pdksh
Version:	5.2.14p2
Current Vers:	5.2.14p2
Maintainer:	Michael Rendell <michael@cs.mun.ca>
Archive Site:	ftp://ftp.cs.mun.ca/pub/pdksh/
Home Page:	http://www.cs.mun.ca/~michael/pdksh/
Mailing List:
Responsible:	jdolecek
License:	Public domain
pdksh-5.2.14-patches.1 and pdksh-5.2.14-patches.2 have been applied.

Package:	PF (openbsd packet filter)
Version:	OpenBSD 3.7
Current Vers:	OpenBSD 3.9-current
Maintainer:	The OpenBSD Project
Archive Site:	ftp://ftp.openbsd.org/
Home Page:	http://www.openbsd.org/faq/pf/
Mailing List:	pf@benzedrine.cx or appropriate OpenBSD mailing list
Responsible:	peter, yamt
License:	BSD (2-clause)
Notes:
kernel code is imported into src/sys/dist/pf and src/sys/net has reachover
definition (files.pf).  userland code is imported into src/dist/pf, and
reachover Makefiles are in src/usr.sbin/pf.

Package:	pkg_install
Version:	20071103
Current Vers.:	20071103
Maintainer:	The pkgsrc developers
Home Page:	http://www.pkgsrc.org
Mailing List:	tech-pkg@NetBSD.org
Responsible:	joerg
License:	BSD
Notes:
The authoritive version used to live in src/usr.sbin/pkg_install and was
moved to pkgsrc/pkgtool/pkg_install. Reachover Makefiles are kept in place.

Package:	ping
Version:	980911
Current Vers:	980911
Maintainer:	Vernon Schryver <vjs@rhyolite.com>
Archive Site:	ftp://ftp.rhyolite.com/src/
Home Page:	http://www.rhyolite.com/src/
Mailing List:
Responsible:	christos
License:	BSD (3-clause)
Notes:
We use err() and friends. We have changes for snprintf, extra
formating in man pages, disallowing flood pinging, alignment fixes,
and more.

Package:	postfix
Version:	2.4.5
Current Vers:	2.4.6
Maintainer:	Wietse Venema <wietse@porcupine.org>
Archive Site:	ftp://postfix.cloud9.net/official/
Home Page:	http://www.postfix.org/
Mailing List:	postfix-users@postfix.org
Responsible:	heas
License:	IBM Public License. See also src/gnu/dist/postfix.
Notes:
HTML documentation should be kept in sync with the README_FILES.
src/gnu/dist/postfix/conf/postfix-files must be kept in sync with our
directory layout (the easiest way to check is by running ``postfix
set-permissions'').

Package:	ppp
Version:	2.4.4
Current Vers:	2.4.4
Maintainer:	Paul Mackerras <paulus@samba.org>
Archive Site:	ftp://ftp.samba.org/pub/ppp/
Home Page:
CVS root:	:pserver:cvs@pserver.samba.org:/cvsroot (password: cvs)
Mailing List:
Responsible:	christos, cube
License:	BSD (3-clause)
Notes:
BSD support was removed from 2.4.0; I added it back and removed
some GPL pieces. Multilink support is missing. Repeated pings to
Paulus have not yielded results. I've retrofitted pppdump to use
net/zlib, and <net/ppp-comp.h> and I now maintain sys-bsd.c. This
is clearly a pain. I have not tested the modules code, neither our
makefiles make it easy to construct a module, but I left one there
as an example.
TDB code as found in 2.4.x, x>1 is under the GPL.  Therefore, we're
using the version found in 2.4.1.

Package:	rcs
Version:	5.7
Current Vers:	5.7
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/rcs/
Mailing List:	bug-gnu-utils@gnu.org
Home Page:	http://www.gnu.org/software/rcs/
Responsible:	agc
License:	GPLv2
Notes:
Beta versions are available from Purdue (ftp.cs.purdue.edu:/pub/RCS).

Package:	root.cache
Version:	2007110100 (Nov 01, 2007)
Current Vers:	2007110100 (Nov 01, 2007)
Maintainer:	InterNIC
Archive Site:	ftp://ftp.internic.net/domain/named.root
Home Page:	ftp://ftp.internic.net/domain/named.root
Mailing List:
Responsible:	thorpej
License:	Public domain
Notes:
The root server cache is also included with BIND.  However, the
InterNIC version is usually more up to date.

Package:	routed
Version:	2.28
Current Vers:	2.31
Maintainer:	Vernon Schryver <vjs@rhyolite.com>
Archive Site:	ftp://ftp.rhyolite.com/src/
Home Page:	http://www.rhyolite.com/src/
Mailing List:
Responsible:	christos
License:	BSD (4-clause)
Notes:
We use the md5 code from libc
We don't allow RIP_TRACEON and RIP_TRACEOFF
We use arc4random
We use strlcpy/snprintf

Package:	send-pr (part of GNATS)
Version:	3.95
Current Vers:	4.1
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/gnats/
Home Page:	http://www.gnu.org/software/gnats/
Mailing List:	bug-gnats@gnu.org
License:	GPLv2
Responsible:
Notes:

Package:	SoftFloat
Version:	2a
Current Vers:	2b
Maintainer:	John Hauser <jhauser@jhauser.us>
Archive Site:	http://www.jhauser.us/arithmetic/SoftFloat.html
Home Page:	http://www.jhauser.us/arithmetic/SoftFloat.html
Mailing List:
Responsible:	bjh21
License:	Public domain
Notes:
Heavily modified for use as a soft float library for GCC.  The actual
arithmetic code is unchanged, though, and should behave exactly like the
original.

Package:	tcpdump
Version:	3.9.7
Current Vers:	3.9.7
Maintainer:	tcpdump-workers@lists.tcpdump.org
Archive Site:	http://www.tcpdump.org/release/
Home Page:	http://www.tcpdump.org/
Mailing List:	tcpdump-workers@lists.tcpdump.org
Responsible:
License:	BSD (3-clause)
Notes:
Code will be imported into src/dist/tcpdump.  Changes have to go back to
tcpdump.org.

Package:	termcap.src
Version:	9.13.25
Current Vers:	11.0.1
Maintainer:	Eric S. Raymond <terminfo@ccil.org>
Archive Site:	http://www.catb.org/~esr/terminfo/
Home Page:	http://www.catb.org/~esr/terminfo/
Mailing List:
Responsible:
License:	Public domain
Notes:

Package:	TestFloat
Version:	2a
Current Vers:	2a
Maintainer:	John Hauser <jhauser@jhauser.us>
Archive Site:	http://www.jhauser.us/arithmetic/TestFloat.html
Home Page:	http://www.jhauser.us/arithmetic/TestFloat.html
Mailing List:
Responsible:	ross
License:	BSD (4-clause)
Notes:

Package:	texinfo
Version:	4.7
Current Vers:	4.11
Maintainer:	FSF
Archive Site:	ftp://ftp.gnu.org/gnu/texinfo/
Home Page:	http://www.gnu.org/software/texinfo/
Mailing List:	bug-texinfo@gnu.org
Responsible:	wiz
License:	GPLv2 (4.9 is GPLv3)
Notes:
Use src/gnu/dist/texinfo/texinfo2netbsd for preparing the source tree
for the import.

Package:	top
Version:	3.5beta12
Current Vers:	3.6
Maintainer:	William LeFebvre <wnl@groupsys.com>
Archive Site:	ftp://ftp.groupsys.com/pub/top/
Home Page:	http://www.unixtop.org/
Mailing List:	top-spinners@ocee.groupsys.com
Responsible:	simonb
License:	BSD (2-clause)
Notes:
Remove all non-current NetBSD machine definitions and man page
extensions in machine/ before importing.
After importing, run:
	./Configure <netbsd-module-name>
	rm machine/*.desc Make.desc SYNOPSIS machine.c
	cvs commit -m "Update ./Configure'd files." top.local.h top.1

Package:	traceroute
Version:	1.4a5
Current Vers:	1.4a12
Maintainer:	traceroute@ee.lbl.gov
Archive Site:	ftp://ftp.ee.lbl.gov/
Home Page:	http://ftp.ee.lbl.gov/
Mailing List:
Responsible:
License:	BSD (4-clause)
Notes:

Package:	tz
Version:	tzcode2004a / tzdata2007h
Current Vers:	tzcode2007h / tzdata2007h
Maintainer:	Arthur David Olson <ado@elsie.nci.nih.gov>
Archive Site:	ftp://elsie.nci.nih.gov/pub/
Home Page:
Mailing List:	tz@elsie.nci.nih.gov
Responsible:	kleink
License:	Public domain
Notes:
Use src/lib/libc/time/tzcode2netbsd to prepare the source tree
for import.

Package:	wpa_supplicant
Version:	0.4.9
Current Vers:	0.4.9
Maintainer:	Jouni Malinen <jkmaline@cc.hut.fi>
Archive Site:	http://hostap.epitest.fi/releases/
Home Page:	http://hostap.epitest.fi/
Mailing List:
Responsible:	scw, dyoung
License:	BSD or GPLv2
Notes:
See /usr/src/dist/wpa_supplicant/NetBSD-upgrade for update instructions.

Package:	XFree86
Version:	4.5.0
Current Vers:	4.7.0
Maintainer:	XFree86 Project, Inc.
Archive Site:	ftp://ftp.xfree86.org/pub/XFree86/
Home Page:	http://www.xfree86.org/
Mailing List:	devel@xfree86.org
Responsible:	tron
License:	XFree
Notes:
4.x:
 Only X4??src-1 to X4??src-6 were imported. X4??src-7 contains postscript
 files which we don't need in our tree.
 ALL changes must be sent back to the XFree86 repository. Patches should
 be submitted back via http://bugzilla.xfree86.org.

Package:	Xorg
Version:	7.0
Current Vers:	7.0
Maintainer:	The X.Org Foundation
Archive Site:	http://xorg.freedesktop.org/releases/X11R7.0/src/
Home Page:	http://www.x.org/
Mailing List:	xorg@lists.freedesktop.org
Responsible:	macallan
License:	XFree
Notes:		This is the modular branch tagged as XORG-7_0 pulled from
		xorg's cvs repository.

Package:	zlib
Version:	1.2.3
Current Vers:	1.2.3
Maintainer:	Jean-loup Gailly and Mark Adler <zlib@gzip.org>
Archive Site:	http://www.zlib.net/
Home Page:	http://www.zlib.net/
Mailing List:
Responsible:	gwr, tron, christos
License:	BSD (3-clause)
Notes:
Imported to src/common/dist/zlib and shared by the kernel and userland.

Package:	services, protocols
Version:	2007-06-14
Current Vers:	2007-06-14
Maintainer:	IANA
Archive Site:	http://www.iana.org/assignments/
Home Page:	http://www.iana.org
Mailing List:
Responsible:	christos
License:	None
Notes:
1. Download the latest converter from:
	http://www.sethwklein.net/projects/iana-etc/
2. Unpack it and run:
	gmake get
	gmake
3. Add NetBSD rcsid to the generated protocols and services.
4. Append the local services from the current services file.
5. Run:
	services_mkdb -u services > /usr/src/etc/services
	cp protocols /usr/src/etc/protocols