bootptab revision 1.3 
1#	$NetBSD: bootptab,v 1.3 1996/05/08 17:19:22 thorpej Exp $
2#
3# /etc/bootptab: database for bootp server (/etc/bootpd)
4# Last update Mon 11/7/88 18:03
5# Blank lines and lines beginning with '#' are ignored.
6#
7# Legend:
8#
9#	first field -- hostname
10#			(may be full domain name and probably should be)
11#
12#            bf   Bootfile
13#            bs   Bootfile size in 512-octet blocks
14#            cs   Cookie server address list
15#            df   Merit dump file
16#            dn   Domain name
17#            ds   Domain name server address list
18#            ef   Extension file
19#            gw   Gateway address list
20#            ha   Host hardware address
21#            hd   Bootfile home directory
22#            hn   Send client's hostname to client
23#            ht   Host hardware type (see Assigned Numbers RFC)
24#            im   Impress server address list
25#            ip   Host IP address
26#            lg   Log server address list
27#            lp   LPR server address list
28#            ns   IEN-116 name server address list
29#            nt   NTP (time) Server (RFC 1129)
30#            ra   Reply address override
31#            rl   Resource location protocol server address list
32#            rp   Root path to mount as root
33#            sa   TFTP server address client should use
34#            sm   Host subnet mask
35#            sw   Swap server address
36#            tc   Table continuation (points to similar "template" host entry)
37#            td   TFTP root directory used by "secure" TFTP servers
38#            to   Time offset in seconds from UTC
39#            ts   Time server address list
40#            vm   Vendor magic cookie selector
41#            yd   YP (NIS) domain name
42#            ys   YP (NIS) server address
43
44#
45# Be careful about including backslashes where they're needed.  Weird (bad)
46# things can happen when a backslash is omitted where one is intended.
47#
48
49
50# First, we define a global entry which specifies the stuff every host uses.
51
52global.dummy:\
53        :sm=255.255.255.0:\
54        :hd=/home/nfsclient:bf=null:\
55        :ds=128.32.149.141:\
56        :ns=0x80020b4d 0x80020ffd:\
57        :ts=0x80020b4d 0x80020ffd:\
58        :to=18000:
59
60# Next, we can define different master entries for each subnet. . .
61
62#subnet13.dummy:\
63#	:tc=global.dummy:gw=128.2.13.1:
64#
65#
66# We should be able to use as many levels of indirection as desired.  Use
67# your imagination. . .
68#
69
70
71# Individual entries (could also have different servers for some/all of these
72# hosts, but we don't really use this feature at CMU):
73
74#carnegie:tc=subnet13.dummy:ht=ieee802:ha=7FF8100000AF:ip=128.2.11.1:
75#baldwin:tc=subnet19.dummy:ht=ethernet:ha=0800200159C3:ip=128.2.11.10:
76
77
78#example nfs diskless client
79
80#timesink:hd=/home/nfsclient/timesink:\
81#	tc=subnet149.dummy:ht=ethernet:ha=0800200168A7:ip=128.32.149.20:
82