rc.conf revision 1.6 1 1.6 martin # $NetBSD: rc.conf,v 1.6 2001/01/08 12:45:39 martin Exp $
2 1.1 lukem #
3 1.1 lukem # /etc/defaults/rc.conf --
4 1.1 lukem # default configuration of /etc/rc.conf
5 1.1 lukem #
6 1.1 lukem # see rc.conf(5) for more information.
7 1.2 lukem #
8 1.2 lukem # DO NOT EDIT THIS FILE DIRECTLY; IT MAY BE REPLACED DURING A SYSTEM UPGRADE.
9 1.2 lukem # EDIT /etc/rc.conf INSTEAD.
10 1.1 lukem #
11 1.1 lukem
12 1.1 lukem #
13 1.1 lukem # Use program=YES to enable program, NO to disable it. program_flags are
14 1.1 lukem # passed to the program on the command line.
15 1.1 lukem #
16 1.1 lukem
17 1.1 lukem # Uncomment this if you want to use local paths in rc.
18 1.1 lukem #
19 1.1 lukem #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin
20 1.1 lukem
21 1.1 lukem # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown.
22 1.1 lukem #
23 1.1 lukem do_rcshutdown=YES
24 1.1 lukem
25 1.1 lukem # Basic network configuration
26 1.1 lukem #
27 1.1 lukem
28 1.1 lukem # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu).
29 1.1 lukem # If blank, use /etc/myname.
30 1.1 lukem #
31 1.1 lukem hostname=""
32 1.1 lukem
33 1.1 lukem # If there's only one way out of your network, set this to the hostname
34 1.1 lukem # or the IP address of the router that will get your packets off the LAN.
35 1.1 lukem # If blank, use /etc/mygate.
36 1.1 lukem #
37 1.1 lukem defaultroute=""
38 1.1 lukem
39 1.1 lukem # The NIS domain name (formerly known as Yellow Pages); not in any way
40 1.1 lukem # related to Internet domain names.
41 1.1 lukem # If blank, use /etc/defaultdomain.
42 1.1 lukem #
43 1.1 lukem domainname=""
44 1.1 lukem
45 1.1 lukem # Filesystems to mount early in boot-up.
46 1.1 lukem # Note that `/var' is needed in $critical_filesystems_beforenet (or
47 1.1 lukem # implied as part of `/') as certain services that need /var (such as
48 1.1 lukem # dhclient) may be needed to get the network operational enough to mount
49 1.1 lukem # the $critical_filesystems.
50 1.1 lukem #
51 1.1 lukem critical_filesystems_beforenet="/var"
52 1.1 lukem critical_filesystems="/usr"
53 1.1 lukem
54 1.1 lukem # Set this to YES if you have purposefully setup no swap partitions and
55 1.1 lukem # don't want to be warned about it.
56 1.1 lukem #
57 1.1 lukem no_swap=NO
58 1.1 lukem
59 1.1 lukem # One-time actions and programs on boot-up.
60 1.1 lukem #
61 1.1 lukem lkm=NO # run /etc/rc.lkm
62 1.1 lukem savecore=YES savecore_flags="-z"
63 1.1 lukem clear_tmp=YES # clear /tmp after reboot
64 1.1 lukem update_motd=YES # updates /etc/motd
65 1.1 lukem dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot
66 1.1 lukem accounting=NO # needs /var/account/acct
67 1.1 lukem newsyslog=NO newsyslog_flags="" # trim log files
68 1.1 lukem
69 1.1 lukem # NOTE: default coredump name now set in /etc/sysctl.conf
70 1.1 lukem
71 1.1 lukem # Security setting. If $securelevel is non-empty, the system securelevel
72 1.1 lukem # is set to this value early in the boot sequence. Otherwise the default
73 1.1 lukem # action is taken (see init(8)).
74 1.1 lukem #
75 1.1 lukem securelevel="" # securelevel to set to
76 1.1 lukem
77 1.1 lukem # To set the IP address of an interface either use
78 1.1 lukem # ifconfig_xxN="IP-NO"
79 1.1 lukem # where xxN is the interface. If this variable is not set then
80 1.1 lukem # contents of the file /etc/ifconfig.xxN is used.
81 1.1 lukem
82 1.1 lukem # Networking startup.
83 1.1 lukem #
84 1.1 lukem ipfilter=NO # uses /etc/ipf.conf
85 1.1 lukem ipnat=NO # uses /etc/ipnat.conf
86 1.1 lukem ipsec=NO # uses /etc/ipsec.conf
87 1.1 lukem ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages
88 1.1 lukem auto_ifconfig=YES # config all avail. interfaces
89 1.1 lukem net_interfaces="" # used only if above is NO
90 1.1 lukem flushroutes=YES # flush routes in netstart
91 1.1 lukem dhclient=NO # behave as a DHCP client
92 1.1 lukem dhclient_flags="" # blank: config all interfaces
93 1.1 lukem ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall
94 1.1 lukem ppp_peers="" # /etc/ppp/peers to call
95 1.1 lukem ip6mode=host # host, autohost or router
96 1.4 itojun ip6sitelocal=NO # IPv6 sitelocal addrs
97 1.1 lukem rtsol=NO rtsol_flags="" # for ip6mode=autohost only
98 1.1 lukem
99 1.1 lukem # Daemons required by servers. These are not needed for strictly client use.
100 1.1 lukem #
101 1.1 lukem
102 1.1 lukem # inetd is used to start the IP-based services enabled in /etc/inetd.conf
103 1.1 lukem #
104 1.1 lukem inetd=YES inetd_flags="-l" # -l logs libwrap
105 1.1 lukem
106 1.1 lukem # rpcbind (formerly known as 'portmap') is used to look up RPC-based services.
107 1.1 lukem #
108 1.1 lukem rpcbind=NO rpcbind_flags="-l" # -l logs libwrap
109 1.1 lukem
110 1.1 lukem # Commonly used daemons.
111 1.1 lukem #
112 1.1 lukem syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only
113 1.1 lukem cron=YES
114 1.1 lukem named=NO named_flags=""
115 1.1 lukem timed=NO timed_flags=""
116 1.1 lukem ntpd=NO ntpd_flags=""
117 1.1 lukem sendmail=NO sendmail_flags="-bd -q30m"
118 1.1 lukem postfix=NO
119 1.1 lukem lpd=NO lpd_flags="-s" # -s "secure" unix domain only
120 1.1 lukem sshd=NO sshd_flags=""
121 1.1 lukem
122 1.1 lukem # Routing daemons.
123 1.1 lukem #
124 1.1 lukem routed=NO routed_flags="-q"
125 1.1 lukem gated=NO gated_flags=""
126 1.1 lukem mrouted=NO mrouted_flags=""
127 1.1 lukem route6d=NO route6d_flags=""
128 1.1 lukem rtsold=NO rtsold_flags="" # for ip6mode=autohost only
129 1.1 lukem
130 1.1 lukem # Daemons used to boot other hosts over a network.
131 1.1 lukem #
132 1.1 lukem rarpd=NO rarpd_flags="-a"
133 1.1 lukem bootparamd=NO bootparamd_flags=""
134 1.1 lukem dhcpd=NO dhcpd_flags="-q"
135 1.1 lukem dhcrelay=NO dhcrelay_flags=""
136 1.1 lukem rbootd=NO rbootd_flags=""
137 1.1 lukem mopd=NO mopd_flags="-a"
138 1.1 lukem rtadvd=NO rtadvd_flags=""
139 1.1 lukem
140 1.1 lukem # X11 daemons.
141 1.1 lukem #
142 1.1 lukem xfs=NO xfs_flags="" # X11 font server
143 1.1 lukem xdm=NO xdm_flags="" # X11 display manager; needs
144 1.1 lukem # wscons=YES for local displays.
145 1.1 lukem
146 1.1 lukem # YP (NIS) daemons.
147 1.1 lukem #
148 1.1 lukem ypbind=NO ypbind_flags=""
149 1.1 lukem ypserv=NO ypserv_flags="-d"
150 1.1 lukem yppasswdd=NO yppasswdd_flags=""
151 1.1 lukem
152 1.1 lukem # NFS daemons and parameters.
153 1.1 lukem #
154 1.1 lukem nfs_client=NO # enable client daemons
155 1.1 lukem nfs_server=NO # enable server daemons
156 1.1 lukem mountd_flags=""
157 1.1 lukem nfsd_flags="-6tun 4"
158 1.1 lukem lockd=NO lockd_flags=""
159 1.1 lukem statd=NO statd_flags=""
160 1.1 lukem amd=NO amd_flags="-l syslog -x error,noinfo,nostats"
161 1.1 lukem amd_dir=/amd # mount dir
162 1.1 lukem
163 1.1 lukem # Heimdal Kerberos 5 KDC (with Kerberos IV compatibility)
164 1.1 lukem kdc=NO kdc_flags=""
165 1.5 martin
166 1.5 martin # ISDN daemon
167 1.6 martin # The network interfaces used for isdn are not usefull without the isdnd
168 1.6 martin # running. Therefor they are usually configured "down" first (i.e. in
169 1.6 martin # /etc/ifconfig.isp0) and need to be marked "up" when the daemon is
170 1.6 martin # running. This will happen automatically for all configured isdn interfaces
171 1.6 martin # if this isdn_interfaces is left empty. If this behaviour is not desired
172 1.6 martin # for certain interfaces, set isdn_interfaces to the list of interfaces,
173 1.6 martin # where it should happen. To disable it completely, set isdn_autoupdown to
174 1.6 martin # NO.
175 1.5 martin isdnd=NO isdnd_flags=""
176 1.6 martin isdn_autoupdown=YES
177 1.6 martin isdn_interfaces=""
178 1.1 lukem
179 1.1 lukem # Other daemons.
180 1.1 lukem #
181 1.1 lukem rwhod=NO
182 1.1 lukem
183 1.1 lukem # Hardware daemons.
184 1.1 lukem #
185 1.1 lukem apmd=NO apmd_flags="" # APM power management daemon.
186 1.1 lukem screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker
187 1.1 lukem
188 1.1 lukem # Configuration of "wscons" console driver virtual screens.
189 1.1 lukem #
190 1.1 lukem wscons=NO wscons_flags="" # setup wscons from wscons.conf
191