rc.conf revision 1.130
1 # $NetBSD: rc.conf,v 1.130 2015/01/25 16:26:34 christos Exp $ 2 # 3 # /etc/defaults/rc.conf -- 4 # default configuration of /etc/rc.conf 5 # 6 # see rc.conf(5) for more information. 7 # 8 # DO NOT EDIT THIS FILE DIRECTLY; IT MAY BE REPLACED DURING A SYSTEM UPGRADE. 9 # EDIT /etc/rc.conf INSTEAD. 10 # 11 12 # 13 # Use program=YES to enable program, NO to disable it. program_flags are 14 # passed to the program on the command line. 15 # 16 17 # Uncomment this if you want to use local paths in rc. 18 # 19 #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin 20 21 # Uncomment the following to execute each /etc/rc.d script in 22 # the current shell rather than in a subshell. This may be 23 # faster on very slow machines that have an expensive fork(2). 24 # NOTE: USE THIS AT YOUR OWN RISK; A ROGUE COMMAND 25 # MAY INADVERTENTLY PREVENT BOOT TO MULTIUSER. 26 # 27 #rc_fast_and_loose=YES 28 29 # If rc_silent is true then /etc/rc will suppress most output to 30 # the console. The default is taken from the AB_SILENT flag passed 31 # from the boot loader to the kernel in the boothowto(9) variable. 32 # 33 # rc_silent_cmd is executed once for each suppressed line of output. 34 # Useful values are ":" and "twiddle". 35 # 36 rc_silent=$( [ "$(( $(/sbin/sysctl -n kern.boothowto 2>/dev/null || echo 0) \ 37 & 0x40000 ))" != 0 ] && echo true || echo false ) 38 rc_silent_cmd=twiddle 39 40 # Additional flags to the rcorder(8) that's run by /etc/rc. 41 # 42 rc_rcorder_flags="" 43 44 # The directories searched for rc scripts. 45 # These directories must be part of the root file system. 46 rc_directories=/etc/rc.d 47 48 # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown. 49 # 50 do_rcshutdown=YES 51 52 # Additional flags to the rcorder(8) that's run by /etc/rc.shutdown. 53 # 54 rcshutdown_rcorder_flags="" 55 56 # If this is non-blank, use as the number of seconds to run a watchdog 57 # timer which will terminate /etc/rc.shutdown if the timeout expires. 58 # 59 rcshutdown_timeout="" 60 61 62 # Basic network configuration 63 # 64 65 # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu). 66 # If blank, use /etc/myname. 67 # 68 hostname="" 69 70 # If there's only one way out of your IPv4 network, set this to the hostname 71 # or the IPv4 address of the router that will get your packets off the LAN. 72 # If blank, use /etc/mygate. 73 # 74 defaultroute="" 75 76 # Same thing for IPv6. If blank, use /etc/mygate6. 77 # 78 defaultroute6="" 79 80 # The NIS domain name (formerly known as Yellow Pages); not in any way 81 # related to Internet domain names. 82 # If blank, use /etc/defaultdomain. 83 # 84 domainname="" 85 86 # Filesystems to mount early in boot-up. 87 # Note that `/var' is needed in $critical_filesystems_local (or 88 # implied as part of `/') as certain services that need /var (such as 89 # dhclient) may be needed to get the network operational enough to mount 90 # the $critical_filesystems_remote. Prepending "OPTIONAL:" means it 91 # will not be an error if that file system is not present in fstab(5). 92 # 93 critical_filesystems_local="OPTIONAL:/var" 94 critical_filesystems_remote="OPTIONAL:/usr" 95 96 # Swap device controls. 97 # 98 no_swap=NO # Set to YES if you have purposefully setup no swap 99 # partitions and don't want to be warned about it. 100 swapoff=YES # Remove block-type swap partitions upon shutdown 101 # This defaults to yes, so that raids shutdown cleanly 102 103 # Concatenated disk driver. 104 # 105 ccd=YES 106 107 # RAIDframe driver (manually configured devices). 108 # 109 raidframe=YES 110 111 # Crypto file system. 112 # 113 cgd=YES 114 115 # Logical Volume Manager 116 # 117 lvm=NO 118 119 # One-time actions and programs on boot-up. 120 # 121 savecore=YES savecore_flags="-z" 122 savecore_dir="/var/crash" 123 per_user_tmp=NO # per-user /tmp directories 124 per_user_tmp_dir="/private/tmp" # real storage for /tmp 125 clear_tmp=YES # clear /tmp after reboot 126 update_motd=YES # updates /etc/motd 127 dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot 128 accounting=NO # uses /var/account/acct 129 newsyslog=NO newsyslog_flags="" # trim log files 130 quota=YES # check and enable quotas 131 ldconfig=YES # rebuild a.out ldconfig cache 132 sysdb=YES # build system databases 133 rndctl=NO rndctl_flags="" # configure rndctl(8) 134 gpio=NO # configure GPIO devices 135 136 # cope with other OSes using the real time clock at localtime on this 137 # machine (by adjusting kern.rtc_offset at boot) 138 rtclocaltime=NO 139 140 # NOTE: default coredump name now set in /etc/sysctl.conf 141 142 # 143 # File system check flags; default to preen mode, checking file systems 144 # that are listed in /etc/fstab in parallel as the fsck pass number 145 # permits. Fix minor faults automatically, and exit with non 0 only 146 # when major errors occur. 147 # 148 fsck_flags=-p 149 150 # Security setting. If $securelevel is non-empty, the system securelevel 151 # is set to this value early in the boot sequence. Otherwise the default 152 # action is taken (see init(8)). 153 # 154 securelevel="" # securelevel to set to 155 156 # To set the IP address of an interface either use 157 # ifconfig_xxN="IP-NO" 158 # where xxN is the interface. If this variable is not set then 159 # contents of the file /etc/ifconfig.xxN is used. 160 161 # Networking startup. 162 # 163 mdnsd=NO 164 npf=NO 165 ipfilter=NO ipfilter_flags="" # uses /etc/ipf.conf 166 ipnat=NO # uses /etc/ipnat.conf 167 ipfs=NO ipfs_flags="" # save/load ipnat and ipf states 168 ipsec=NO # uses /etc/ipsec.conf 169 ipmon=NO ipmon_flags="-Dns" # syslog ipfilter messages 170 pf=NO pf_rules="/etc/pf.conf" pf_flags="" 171 pflogd=NO 172 ftp_proxy=NO 173 racoon=NO # IKE daemon 174 auto_ifconfig=YES # config all avail. interfaces 175 net_interfaces="" # used only if above is NO 176 flushroutes=YES # flush routes in netstart 177 dhcpcd=NO 178 dhcpcd_flags="-qM" # For ifconfig_XXX=dhcp. 179 dhclient=NO # behave as a DHCP client 180 dhclient_flags="" # blank: config all interfaces 181 ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall 182 ppp=YES ppp_peers="" # /etc/ppp/peers to call 183 ip6mode=host # host, autohost or router 184 ip6uniquelocal=NO # IPv6 unique-local forwarding 185 186 # Special treatment for interfaces that need to be downed on 187 # shutdown (because they might cause unnecessary costs or block resources 188 # on the peer). All pppoe* interfaces are automatically included in this 189 # list, add others here manually. 190 #force_down_interfaces="" 191 192 ifwatchd=NO # execute up/down scripts for in-kernel PPPoE interfaces 193 ifwatchd_flags="-u /etc/ppp/ip-up -d /etc/ppp/ip-down pppoe0" 194 195 # ALTQ configuration/monitoring daemon 196 altqd=NO altqd_flags="" 197 198 # Daemons required by servers. These are not needed for strictly client use. 199 # 200 201 # inetd is used to start the IP-based services enabled in /etc/inetd.conf 202 # 203 inetd=YES inetd_flags="-l" # -l logs libwrap 204 205 # identd 206 # 207 identd=NO identd_flags="-b -l -u nobody" 208 209 # rpcbind (formerly known as 'portmap') is used to look up RPC-based services. 210 # 211 rpcbind=NO rpcbind_flags="-l" # -l logs libwrap 212 213 # Commonly used daemons. 214 # 215 syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only 216 cron=YES 217 named=NO named_flags="" # see below for named_chrootdir 218 timed=NO timed_flags="" 219 ntpd=NO ntpd_flags="" # see below for ntpd_chrootdir 220 # The default setting for postfix here is YES, but gets re-examined by 221 # the rc.d/postfix startup script when it runs. The script sets 222 # _rc_d_postfix to "check", and then causes all rc.conf settings to 223 # be re-evaluated. If the value of $postfix after this is "check", 224 # the script then checks to see if /etc/mailer.conf selects the system 225 # postfix. If not, it does print a warning and does not start postfix 226 # to avoid conflict with a different MTA. 227 postfix=${_rc_d_postfix:-YES} 228 lpd=NO lpd_flags="-s" # -s "secure" unix domain only 229 sshd=NO sshd_flags="" 230 ssh_keygen_flags="" 231 ftpd=NO ftpd_flags="-ll" 232 httpd=NO httpd_flags="" 233 httpd_wwwdir="/var/www" 234 httpd_wwwuser="_httpd" 235 236 # To run the named(8) DNS server as an unprivileged user under a 237 # chroot(2) cage, uncomment the following after migrating the contents 238 # of /etc/namedb to /var/chroot/named/etc/namedb 239 # 240 #named_chrootdir="/var/chroot/named" 241 242 # To run the ntpd(8) NTP server as an unprivileged user under a 243 # chroot(2) cage, uncomment the following, after ensuring that: 244 # - The kernel has "pseudo-device clockctl" compiled in 245 # - /dev/clockctl is present 246 # 247 #ntpd_chrootdir="/var/chroot/ntpd" 248 249 # Routing daemons. 250 # 251 routed=NO routed_flags="-q" 252 gated=NO 253 mrouted=NO mrouted_flags="" 254 route6d=NO route6d_flags="" 255 ldpd=NO 256 257 # Daemons used to boot other hosts over a network. 258 # 259 rarpd=NO rarpd_flags="-a" 260 bootparamd=NO bootparamd_flags="" 261 dhcpd=NO dhcpd_flags="-q" 262 dhcrelay=NO dhcrelay_flags="" 263 rbootd=NO rbootd_flags="" 264 mopd=NO mopd_flags="-a" 265 ndbootd=NO ndbootd_flags="-s /tftpboot /tftpboot/bootyy" 266 rtadvd=NO rtadvd_flags="" 267 isibootd=NO isibootd_flags="" 268 269 # X11 daemons. 270 # 271 xfs=NO xfs_flags="" # X11 font server 272 xdm=NO xdm_flags="" # X11 display manager; needs 273 # wscons=YES for local displays. 274 275 # Update fontconfig cache at boot 276 fccache=YES 277 278 # YP (NIS) daemons. 279 # 280 ypbind=NO ypbind_flags="" 281 ypserv=NO ypserv_flags="-d" 282 yppasswdd=NO yppasswdd_flags="" 283 284 # NFS daemons and parameters. 285 # 286 mountd=NO mountd_flags="" # NFS mount requests daemon 287 nfs_client=NO # enable client daemons 288 nfs_server=NO # enable server daemons 289 nfsd_flags="" 290 lockd=NO lockd_flags="" 291 statd=NO statd_flags="" 292 amd=NO amd_flags="-l syslog -x error,noinfo,nostats" 293 amd_dir=/amd # mount dir 294 295 # Heimdal Kerberos 5 KDC (with Kerberos IV compatibility) 296 kdc=NO kdc_flags="--detach" 297 298 # iSCSI target 299 iscsi_target=NO iscsi_target_flags="" 300 301 # WPA daemons. 302 hostapd=NO hostapd_flags="-B /etc/hostapd.conf" 303 wpa_supplicant=NO wpa_supplicant_flags="" # -i<if> -c<file> 304 305 # ISDN daemon 306 isdnd=NO isdnd_flags="" 307 308 # Bluetooth configuration 309 bluetooth=NO 310 # and the following are used when bluetooth=YES 311 btconfig_devices="" # all 312 bthcid=YES bthcid_flags="" 313 sdpd=YES sdpd_flags="" 314 315 # Other daemons. 316 # 317 rwhod=NO rwhod_flags="-u _rwhod" 318 devpubd=NO devpubd_flags="" # autocreate nodes for new devs 319 envsys=NO # Set /etc/envsys.conf preferences 320 321 # Hardware daemons. 322 # 323 apmd=NO apmd_flags="" # APM power management daemon. 324 powerd=NO powerd_flags="" # power management daemon 325 screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker 326 327 moused=NO # serial mouse handler 328 moused_flags="-p /dev/tty00" 329 330 wdogctl=NO # watchdog timer control 331 # wdogctl_flags="-k devicename" 332 irdaattach=NO # attach serial lines to IrDA 333 irdaattach_flags="tty00" 334 335 # Configuration of "wscons" console driver virtual screens. 336 # 337 wscons=NO wscons_flags="" # setup wscons from wscons.conf 338 339 # Configuration of "wsmoused" console driver cut-n-paste support 340 # 341 wsmoused=NO wsmoused_flags="" 342 343 # Configuration of "tpctl" touch panel calibration utility 344 # 345 tpctl=NO tpctl_flags="" 346 347 # Mixer setting 348 # 349 mixerctl=NO mixerctl_mixers="" # "mixer0 mixer1" means saving 350 # and restoring their settings 351 352 # Vi recovery notification. Vi(1)'s -r option can recover files which were 353 # accidentally closed. See vi(1) for more details. 354 # 355 virecover=YES 356 357 # Veriexec signature loading. 358 # 359 veriexec=NO 360 veriexec_strict=0 361 veriexec_verbose=0 362 veriexec_flags="-k" 363 364 # Entropy load/save to/from /dev/random at startup/shutdown 365 # 366 random_seed=YES 367 368 # Creating / updating of man page index on boot 369 makemandb=YES 370 371 # blacklist daemon, needs npf 372 blacklistd=NO 373
Indexes created Sun Oct 12 22:09:51 GMT 2025