rc.conf revision 1.2
1 # $NetBSD: rc.conf,v 1.2 2000/11/08 23:17:50 lukem Exp $ 2 # 3 # /etc/defaults/rc.conf -- 4 # default configuration of /etc/rc.conf 5 # 6 # see rc.conf(5) for more information. 7 # 8 # DO NOT EDIT THIS FILE DIRECTLY; IT MAY BE REPLACED DURING A SYSTEM UPGRADE. 9 # EDIT /etc/rc.conf INSTEAD. 10 # 11 12 # 13 # Use program=YES to enable program, NO to disable it. program_flags are 14 # passed to the program on the command line. 15 # 16 17 # Uncomment this if you want to use local paths in rc. 18 # 19 #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin 20 21 # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown. 22 # 23 do_rcshutdown=YES 24 25 # Basic network configuration 26 # 27 28 # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu). 29 # If blank, use /etc/myname. 30 # 31 hostname="" 32 33 # If there's only one way out of your network, set this to the hostname 34 # or the IP address of the router that will get your packets off the LAN. 35 # If blank, use /etc/mygate. 36 # 37 defaultroute="" 38 39 # The NIS domain name (formerly known as Yellow Pages); not in any way 40 # related to Internet domain names. 41 # If blank, use /etc/defaultdomain. 42 # 43 domainname="" 44 45 # Filesystems to mount early in boot-up. 46 # Note that `/var' is needed in $critical_filesystems_beforenet (or 47 # implied as part of `/') as certain services that need /var (such as 48 # dhclient) may be needed to get the network operational enough to mount 49 # the $critical_filesystems. 50 # 51 critical_filesystems_beforenet="/var" 52 critical_filesystems="/usr" 53 54 # Set this to YES if you have purposefully setup no swap partitions and 55 # don't want to be warned about it. 56 # 57 no_swap=NO 58 59 # One-time actions and programs on boot-up. 60 # 61 lkm=NO # run /etc/rc.lkm 62 savecore=YES savecore_flags="-z" 63 clear_tmp=YES # clear /tmp after reboot 64 update_motd=YES # updates /etc/motd 65 dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot 66 accounting=NO # needs /var/account/acct 67 newsyslog=NO newsyslog_flags="" # trim log files 68 69 # NOTE: default coredump name now set in /etc/sysctl.conf 70 71 # Security setting. If $securelevel is non-empty, the system securelevel 72 # is set to this value early in the boot sequence. Otherwise the default 73 # action is taken (see init(8)). 74 # 75 securelevel="" # securelevel to set to 76 77 # To set the IP address of an interface either use 78 # ifconfig_xxN="IP-NO" 79 # where xxN is the interface. If this variable is not set then 80 # contents of the file /etc/ifconfig.xxN is used. 81 82 # Networking startup. 83 # 84 ipfilter=NO # uses /etc/ipf.conf 85 ipnat=NO # uses /etc/ipnat.conf 86 ipsec=NO # uses /etc/ipsec.conf 87 ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages 88 auto_ifconfig=YES # config all avail. interfaces 89 net_interfaces="" # used only if above is NO 90 flushroutes=YES # flush routes in netstart 91 dhclient=NO # behave as a DHCP client 92 dhclient_flags="" # blank: config all interfaces 93 ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall 94 ppp_peers="" # /etc/ppp/peers to call 95 ip6mode=host # host, autohost or router 96 rtsol=NO rtsol_flags="" # for ip6mode=autohost only 97 98 # Daemons required by servers. These are not needed for strictly client use. 99 # 100 101 # inetd is used to start the IP-based services enabled in /etc/inetd.conf 102 # 103 inetd=YES inetd_flags="-l" # -l logs libwrap 104 105 # rpcbind (formerly known as 'portmap') is used to look up RPC-based services. 106 # 107 rpcbind=NO rpcbind_flags="-l" # -l logs libwrap 108 109 # Commonly used daemons. 110 # 111 syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only 112 cron=YES 113 named=NO named_flags="" 114 timed=NO timed_flags="" 115 ntpd=NO ntpd_flags="" 116 sendmail=NO sendmail_flags="-bd -q30m" 117 postfix=NO 118 lpd=NO lpd_flags="-s" # -s "secure" unix domain only 119 sshd=NO sshd_flags="" 120 121 # Routing daemons. 122 # 123 routed=NO routed_flags="-q" 124 gated=NO gated_flags="" 125 mrouted=NO mrouted_flags="" 126 route6d=NO route6d_flags="" 127 rtsold=NO rtsold_flags="" # for ip6mode=autohost only 128 129 # Daemons used to boot other hosts over a network. 130 # 131 rarpd=NO rarpd_flags="-a" 132 bootparamd=NO bootparamd_flags="" 133 dhcpd=NO dhcpd_flags="-q" 134 dhcrelay=NO dhcrelay_flags="" 135 rbootd=NO rbootd_flags="" 136 mopd=NO mopd_flags="-a" 137 rtadvd=NO rtadvd_flags="" 138 139 # X11 daemons. 140 # 141 xfs=NO xfs_flags="" # X11 font server 142 xdm=NO xdm_flags="" # X11 display manager; needs 143 # wscons=YES for local displays. 144 145 # YP (NIS) daemons. 146 # 147 ypbind=NO ypbind_flags="" 148 ypserv=NO ypserv_flags="-d" 149 yppasswdd=NO yppasswdd_flags="" 150 151 # NFS daemons and parameters. 152 # 153 nfs_client=NO # enable client daemons 154 nfs_server=NO # enable server daemons 155 mountd_flags="" 156 nfsd_flags="-6tun 4" 157 lockd=NO lockd_flags="" 158 statd=NO statd_flags="" 159 amd=NO amd_flags="-l syslog -x error,noinfo,nostats" 160 amd_dir=/amd # mount dir 161 amd_master=/etc/amd/master # master map 162 163 # Heimdal Kerberos 5 KDC (with Kerberos IV compatibility) 164 kdc=NO kdc_flags="" 165 166 # Other daemons. 167 # 168 rwhod=NO 169 170 # Hardware daemons. 171 # 172 apmd=NO apmd_flags="" # APM power management daemon. 173 screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker 174 175 # Configuration of "wscons" console driver virtual screens. 176 # 177 wscons=NO wscons_flags="" # setup wscons from wscons.conf 178
Indexes created Fri Oct 03 15:10:06 GMT 2025