rc.conf revision 1.9
1 # $NetBSD: rc.conf,v 1.9 2001/02/28 16:52:04 lukem Exp $ 2 # 3 # /etc/defaults/rc.conf -- 4 # default configuration of /etc/rc.conf 5 # 6 # see rc.conf(5) for more information. 7 # 8 # DO NOT EDIT THIS FILE DIRECTLY; IT MAY BE REPLACED DURING A SYSTEM UPGRADE. 9 # EDIT /etc/rc.conf INSTEAD. 10 # 11 12 # 13 # Use program=YES to enable program, NO to disable it. program_flags are 14 # passed to the program on the command line. 15 # 16 17 # Uncomment this if you want to use local paths in rc. 18 # 19 #export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin 20 21 # Uncomment the following to execute each /etc/rc.d script in 22 # the current shell rather than in a subshell. This may be 23 # faster on very slow machines that have an expensive fork(2). 24 # NOTE: USE THIS AT YOUR OWN RISK; A ROGUE COMMAND 25 # MAY INADVERTENTLY PREVENT BOOT TO MULTIUSER. 26 # 27 #rc_fast_and_loose=YES 28 29 # If this is set to NO, shutdown(8) will not run /etc/rc.shutdown. 30 # 31 do_rcshutdown=YES 32 33 # Basic network configuration 34 # 35 36 # Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu). 37 # If blank, use /etc/myname. 38 # 39 hostname="" 40 41 # If there's only one way out of your network, set this to the hostname 42 # or the IP address of the router that will get your packets off the LAN. 43 # If blank, use /etc/mygate. 44 # 45 defaultroute="" 46 47 # The NIS domain name (formerly known as Yellow Pages); not in any way 48 # related to Internet domain names. 49 # If blank, use /etc/defaultdomain. 50 # 51 domainname="" 52 53 # Filesystems to mount early in boot-up. 54 # Note that `/var' is needed in $critical_filesystems_beforenet (or 55 # implied as part of `/') as certain services that need /var (such as 56 # dhclient) may be needed to get the network operational enough to mount 57 # the $critical_filesystems. 58 # 59 critical_filesystems_beforenet="/var" 60 critical_filesystems="/usr" 61 62 # Set this to YES if you have purposefully setup no swap partitions and 63 # don't want to be warned about it. 64 # 65 no_swap=NO 66 67 # One-time actions and programs on boot-up. 68 # 69 lkm=NO # run /etc/rc.lkm 70 savecore=YES savecore_flags="-z" 71 clear_tmp=YES # clear /tmp after reboot 72 update_motd=YES # updates /etc/motd 73 dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot 74 accounting=NO # needs /var/account/acct 75 newsyslog=NO newsyslog_flags="" # trim log files 76 77 # NOTE: default coredump name now set in /etc/sysctl.conf 78 79 # Security setting. If $securelevel is non-empty, the system securelevel 80 # is set to this value early in the boot sequence. Otherwise the default 81 # action is taken (see init(8)). 82 # 83 securelevel="" # securelevel to set to 84 85 # To set the IP address of an interface either use 86 # ifconfig_xxN="IP-NO" 87 # where xxN is the interface. If this variable is not set then 88 # contents of the file /etc/ifconfig.xxN is used. 89 90 # Networking startup. 91 # 92 ipfilter=NO # uses /etc/ipf.conf 93 ipnat=NO # uses /etc/ipnat.conf 94 ipsec=NO # uses /etc/ipsec.conf 95 racoon=NO # IKE daemon 96 ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages 97 auto_ifconfig=YES # config all avail. interfaces 98 net_interfaces="" # used only if above is NO 99 flushroutes=YES # flush routes in netstart 100 dhclient=NO # behave as a DHCP client 101 dhclient_flags="" # blank: config all interfaces 102 ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall 103 ppp_peers="" # /etc/ppp/peers to call 104 ip6mode=host # host, autohost or router 105 ip6sitelocal=NO # IPv6 sitelocal addrs 106 rtsol=NO rtsol_flags="" # for ip6mode=autohost only 107 108 # Daemons required by servers. These are not needed for strictly client use. 109 # 110 111 # inetd is used to start the IP-based services enabled in /etc/inetd.conf 112 # 113 inetd=YES inetd_flags="-l" # -l logs libwrap 114 115 # rpcbind (formerly known as 'portmap') is used to look up RPC-based services. 116 # 117 rpcbind=NO rpcbind_flags="-l" # -l logs libwrap 118 119 # Commonly used daemons. 120 # 121 syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only 122 cron=YES 123 named=NO named_flags="" 124 timed=NO timed_flags="" 125 ntpd=NO ntpd_flags="" 126 sendmail=NO sendmail_flags="-bd -q30m" 127 postfix=NO 128 lpd=NO lpd_flags="-s" # -s "secure" unix domain only 129 sshd=NO sshd_flags="" 130 131 # Routing daemons. 132 # 133 routed=NO routed_flags="-q" 134 gated=NO gated_flags="" 135 mrouted=NO mrouted_flags="" 136 route6d=NO route6d_flags="" 137 rtsold=NO rtsold_flags="" # for ip6mode=autohost only 138 139 # Daemons used to boot other hosts over a network. 140 # 141 rarpd=NO rarpd_flags="-a" 142 bootparamd=NO bootparamd_flags="" 143 dhcpd=NO dhcpd_flags="-q" 144 dhcrelay=NO dhcrelay_flags="" 145 rbootd=NO rbootd_flags="" 146 mopd=NO mopd_flags="-a" 147 rtadvd=NO rtadvd_flags="" 148 149 # X11 daemons. 150 # 151 xfs=NO xfs_flags="" # X11 font server 152 xdm=NO xdm_flags="" # X11 display manager; needs 153 # wscons=YES for local displays. 154 155 # YP (NIS) daemons. 156 # 157 ypbind=NO ypbind_flags="" 158 ypserv=NO ypserv_flags="-d" 159 yppasswdd=NO yppasswdd_flags="" 160 161 # NFS daemons and parameters. 162 # 163 nfs_client=NO # enable client daemons 164 nfs_server=NO # enable server daemons 165 mountd_flags="" 166 nfsd_flags="-6tun 4" 167 lockd=NO lockd_flags="" 168 statd=NO statd_flags="" 169 amd=NO amd_flags="-l syslog -x error,noinfo,nostats" 170 amd_dir=/amd # mount dir 171 172 # Heimdal Kerberos 5 KDC (with Kerberos IV compatibility) 173 kdc=NO kdc_flags="" 174 175 # ISDN daemon 176 # The network interfaces used for isdn are not usefull without the isdnd 177 # running. Therefor they are usually configured "down" first (i.e. in 178 # /etc/ifconfig.isp0) and need to be marked "up" when the daemon is 179 # running. This will happen automatically for all configured isdn interfaces 180 # if this isdn_interfaces is left empty. If this behaviour is not desired 181 # for certain interfaces, set isdn_interfaces to the list of interfaces, 182 # where it should happen. To disable it completely, set isdn_autoupdown to 183 # NO. 184 isdnd=NO isdnd_flags="" 185 isdn_autoupdown=YES 186 isdn_interfaces="" 187 188 # Other daemons. 189 # 190 rwhod=NO 191 192 # Hardware daemons. 193 # 194 apmd=NO apmd_flags="" # APM power management daemon. 195 poffd=NO # x68k power switch monitor 196 poffd_flags="'shutdown -p now'" 197 screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker 198 199 # Configuration of "wscons" console driver virtual screens. 200 # 201 wscons=NO wscons_flags="" # setup wscons from wscons.conf 202
Indexes created Sat Oct 11 19:10:01 GMT 2025