ntp.conf revision 1.14.2.1       1 # $NetBSD: ntp.conf,v 1.14.2.1 2014/01/06 19:12:15 bouyer Exp $
      2 #
      3 # NetBSD default Network Time Protocol (NTP) configuration file for ntpd
      4 
      5 # This file is intended to be both a usable default, and a Quick-Start
      6 # Guide. The directives and options listed here are not at all complete.
      7 # A great deal of additional documentation, including links to FAQS and
      8 # other guides, may be found on the official NTP web site, in particular
      9 #
     10 #	http://www.ntp.org/documentation.html
     11 #
     12 
     13 # Process ID file, so that the daemon can be signalled from scripts
     14 
     15 pidfile		/var/run/ntpd.pid
     16 
     17 # The correction calculated by ntpd(8) for the local system clock's
     18 # drift is stored here.
     19 
     20 driftfile	/var/db/ntp.drift
     21 
     22 # Suppress the syslog(3) message for each peer synchronization change.
     23 
     24 logconfig	-syncstatus
     25 
     26 # Refuse to set the local clock if there are too few good peers or servers.
     27 # This may help minimize disruptions due to network congestion. Don't
     28 # do this if you configure only one server!
     29 
     30 tos		minsane 2
     31 
     32 # Set the number of tries to register with mdns. 0 means never
     33 #
     34 mdnstries	0
     35 
     36 # Access control restrictions.
     37 # See /usr/share/doc/html/ntp/accopt.html for syntax.
     38 # See <http://support.ntp.org/bin/view/Support/AccessRestrictions> for advice.
     39 # Last match wins.
     40 #
     41 # Some of the more common keywords are:
     42 #   ignore      Deny packets of all kinds.
     43 #   kod         Send "kiss-o'-death" packets if clients exceed rate
     44 #               limits.
     45 #   nomodify    Deny attempts to modify the state of the server via
     46 #               ntpq or ntpdc queries.
     47 #   noquery     Deny all ntpq and ntpdc queries.  Does not affect time
     48 #               synchronisation.
     49 #   nopeer      Prevent establishing an new peer association.
     50 #               Does not affect preconfigured peer associations.
     51 #               Does not affect client/server time synchronisation.
     52 #   noserve     Deny all time synchronisation.  Does not affect ntpq or
     53 #               ntpdc queries.
     54 #   notrap      Deny the trap subset of the ntpdc control message protocol.
     55 #   notrust     Deny packets that are not cryptographically authenticated.
     56 #
     57 # By default, either deny everything, or allow client/server time exchange
     58 # but deny configuration changes, queries, and peer associations that were not
     59 # explicitly configured.
     60 # (Uncomment one of the following "restrict default" lines.)
     61 #
     62 #restrict default ignore
     63 restrict default kod nopeer noquery
     64 
     65 # Fewer restrictions for the local subnet.
     66 # (Uncomment and adjust as appropriate.)
     67 #
     68 #restrict 192.0.2.0 mask 255.255.255.0 kod nomodify notrap nopeer
     69 #restrict 2001:db8:: mask ffff:ffff::  kod nomodify notrap nopeer
     70 
     71 # No restrictions for localhost.
     72 #
     73 restrict 127.0.0.1
     74 restrict ::1
     75 
     76 # Hereafter should be "server" or "peer" statements to configure other
     77 # hosts to exchange NTP packets with.
     78 #
     79 # See <http://support.ntp.org/bin/view/Support/DesigningYourNTPNetwork>
     80 # and <http://support.ntp.org/bin/view/Support/SelectingOffsiteNTPServers>
     81 # for advice.
     82 #
     83 # Peers should be selected in such a way that the network path to them
     84 # is short, uncongested, and symmetric (that is, the series of links
     85 # and routers used to get to the peer is the same one that the peer
     86 # uses to get back).  The best place to start looking for NTP peers for
     87 # your system is within your own network, or at your Internet Service
     88 # Provider (ISP).
     89 #
     90 # Ideally, you should select at least three other systems to talk NTP
     91 # with, for an "what I tell you three times is true" effect.
     92 #
     93 
     94 #peer		an.ntp.peer.goes.here
     95 #server		an.ntp.server.goes.here
     96 #restrict	an.ntp.server.goes.here nomodify notrap
     97 
     98 # The pool.ntp.org project coordinates public time servers provided by
     99 # volunteers.  See <http://www.pool.ntp.org>.  The *.netbsd.pool.ntp.org
    100 # servers are intended to be used by default on NetBSD hosts, but
    101 # servers that are closer to you are likely to be better.  Consider
    102 # using servers specific to your country, a nearby country, or your
    103 # continent.
    104 #
    105 # The pool.ntp.org project needs more volunteers! The only criteria to
    106 # join are a nailed-up connection and a static IP address. For details,
    107 # see the web page:
    108 #
    109 #       http://www.pool.ntp.org/join.html
    110 #
    111 
    112 server          0.netbsd.pool.ntp.org
    113 restrict        0.netbsd.pool.ntp.org nomodify notrap
    114 server          1.netbsd.pool.ntp.org
    115 restrict        1.netbsd.pool.ntp.org nomodify notrap
    116 server          2.netbsd.pool.ntp.org
    117 restrict        2.netbsd.pool.ntp.org nomodify notrap
    118 server          3.netbsd.pool.ntp.org
    119 restrict        3.netbsd.pool.ntp.org nomodify notrap
    120