rc.subr revision 1.98
1# $NetBSD: rc.subr,v 1.98 2016/03/06 18:49:42 christos Exp $ 2# 3# Copyright (c) 1997-2011 The NetBSD Foundation, Inc. 4# All rights reserved. 5# 6# This code is derived from software contributed to The NetBSD Foundation 7# by Luke Mewburn. 8# 9# Redistribution and use in source and binary forms, with or without 10# modification, are permitted provided that the following conditions 11# are met: 12# 1. Redistributions of source code must retain the above copyright 13# notice, this list of conditions and the following disclaimer. 14# 2. Redistributions in binary form must reproduce the above copyright 15# notice, this list of conditions and the following disclaimer in the 16# documentation and/or other materials provided with the distribution. 17# 18# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28# POSSIBILITY OF SUCH DAMAGE. 29# 30# rc.subr 31# functions used by various rc scripts 32# 33 34: ${rcvar_manpage:='rc.conf(5)'} 35: ${RC_PID:=$$} ; export RC_PID 36nl=' 37' # a literal newline 38 39# 40# functions 41# --------- 42 43# 44# checkyesno var 45# Test $1 variable. 46# Return 0 if it's "yes" (et al), 1 if it's "no" (et al), 2 otherwise. 47# 48checkyesnox() 49{ 50 eval _value=\$${1} 51 case $_value in 52 53 # "yes", "true", "on", or "1" 54 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) 55 return 0 56 ;; 57 58 # "no", "false", "off", or "0" 59 [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) 60 return 1 61 ;; 62 *) 63 return 2 64 ;; 65 esac 66} 67 68# 69# checkyesno var 70# Test $1 variable, and warn if not set to YES or NO. 71# Return 0 if it's "yes" (et al), nonzero otherwise. 72# 73checkyesno() 74{ 75 local var 76 77 checkyesnox $1 78 var=$? 79 [ $var = 0 -o $var = 1 ] && return $var 80 warn "\$${1} is not set properly - see ${rcvar_manpage}." 81 return 1 82} 83 84# 85# yesno_to_truefalse var 86# Convert the value of a variable from any of the values 87# understood by checkyesno() to "true" or "false". 88# 89yesno_to_truefalse() 90{ 91 local var=$1 92 if checkyesno $var; then 93 eval $var=true 94 return 0 95 else 96 eval $var=false 97 return 1 98 fi 99} 100 101# 102# reverse_list list 103# print the list in reverse order 104# 105reverse_list() 106{ 107 _revlist= 108 for _revfile; do 109 _revlist="$_revfile $_revlist" 110 done 111 echo $_revlist 112} 113 114# 115# If booting directly to multiuser, send SIGTERM to 116# the parent (/etc/rc) to abort the boot. 117# Otherwise just exit. 118# 119stop_boot() 120{ 121 if [ "$autoboot" = yes ]; then 122 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!" 123 kill -TERM ${RC_PID} 124 fi 125 exit 1 126} 127 128# 129# mount_critical_filesystems type 130# Go through the list of critical file systems as provided in 131# the rc.conf(5) variable $critical_filesystems_${type}, checking 132# each one to see if it is mounted, and if it is not, mounting it. 133# It's not an error if file systems prefixed with "OPTIONAL:" 134# are not mentioned in /etc/fstab. 135# 136mount_critical_filesystems() 137{ 138 eval _fslist=\$critical_filesystems_${1} 139 _mountcrit_es=0 140 for _fs in $_fslist; do 141 _optional=false 142 case "$_fs" in 143 OPTIONAL:*) 144 _optional=true 145 _fs="${_fs#*:}" 146 ;; 147 esac 148 _ismounted=false 149 # look for a line like "${fs} on * type *" 150 # or "* on ${fs} type *" in the output from mount. 151 case "${nl}$( mount )${nl}" in 152 *" on ${_fs} type "*) 153 _ismounted=true 154 ;; 155 *"${nl}${_fs} on "*) 156 _ismounted=true 157 ;; 158 esac 159 if $_ismounted; then 160 print_rc_metadata \ 161 "note:File system ${_fs} was already mounted" 162 else 163 _mount_output=$( mount $_fs 2>&1 ) 164 _mount_es=$? 165 case "$_mount_output" in 166 *"${nl}"*) 167 # multiple lines can't be good, 168 # not even if $_optional is true 169 ;; 170 *[uU]'nknown special file or file system'*) 171 if $_optional; then 172 # ignore this error 173 print_rc_metadata \ 174 "note:Optional file system ${_fs} is not present" 175 _mount_es=0 176 _mount_output="" 177 fi 178 ;; 179 esac 180 if [ -n "$_mount_output" ]; then 181 printf >&2 "%s\n" "$_mount_output" 182 fi 183 if [ "$_mount_es" != 0 ]; then 184 _mountcrit_es="$_mount_es" 185 fi 186 fi 187 done 188 return $_mountcrit_es 189} 190 191# 192# check_pidfile pidfile procname [interpreter] 193# Parses the first line of pidfile for a PID, and ensures 194# that the process is running and matches procname. 195# Prints the matching PID upon success, nothing otherwise. 196# interpreter is optional; see _find_processes() for details. 197# 198check_pidfile() 199{ 200 _pidfile=$1 201 _procname=$2 202 _interpreter=$3 203 if [ -z "$_pidfile" -o -z "$_procname" ]; then 204 err 3 'USAGE: check_pidfile pidfile procname [interpreter]' 205 fi 206 if [ ! -f $_pidfile ]; then 207 return 208 fi 209 read _pid _junk < $_pidfile 210 if [ -z "$_pid" ]; then 211 return 212 fi 213 _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" 214} 215 216# 217# check_process procname [interpreter] 218# Ensures that a process (or processes) named procname is running. 219# Prints a list of matching PIDs. 220# interpreter is optional; see _find_processes() for details. 221# 222check_process() 223{ 224 _procname=$1 225 _interpreter=$2 226 if [ -z "$_procname" ]; then 227 err 3 'USAGE: check_process procname [interpreter]' 228 fi 229 _find_processes $_procname ${_interpreter:-.} '-ax' 230} 231 232# 233# _find_processes procname interpreter psargs 234# Search for procname in the output of ps generated by psargs. 235# Prints the PIDs of any matching processes, space separated. 236# 237# If interpreter == ".", check the following variations of procname 238# against the first word of each command: 239# procname 240# `basename procname` 241# `basename procname` + ":" 242# "(" + `basename procname` + ")" 243# 244# If interpreter != ".", read the first line of procname, remove the 245# leading #!, normalise whitespace, append procname, and attempt to 246# match that against each command, either as is, or with extra words 247# at the end. As an alternative, to deal with interpreted daemons 248# using perl, the basename of the interpreter plus a colon is also 249# tried as the prefix to procname. 250# 251_find_processes() 252{ 253 if [ $# -ne 3 ]; then 254 err 3 'USAGE: _find_processes procname interpreter psargs' 255 fi 256 _procname=$1 257 _interpreter=$2 258 _psargs=$3 259 260 _pref= 261 _procnamebn=${_procname##*/} 262 if [ $_interpreter != "." ]; then # an interpreted script 263 read _interp < ${_chroot:-}/$_procname # read interpreter name 264 _interp=${_interp#\#!} # strip #! 265 set -- $_interp 266 if [ $1 = "/usr/bin/env" ]; then 267 shift 268 set -- $(type $1) 269 shift $(($# - 1)) 270 _interp="${1##*/} $_procname" 271 else 272 _interp="$* $_procname" 273 fi 274 if [ $_interpreter != $1 ]; then 275 warn "\$command_interpreter $_interpreter != $1" 276 fi 277 _interpbn=${1##*/} 278 _fp_args='_argv' 279 _fp_match='case "$_argv" in 280 ${_interp}|"${_interp} "*|"${_interpbn}: "*${_procnamebn}*)' 281 else # a normal daemon 282 _fp_args='_arg0 _argv' 283 _fp_match='case "$_arg0" in 284 $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})")' 285 fi 286 287 _proccheck=' 288 ps -o "pid,command" '"$_psargs"' | 289 while read _npid '"$_fp_args"'; do 290 case "$_npid" in 291 PID) 292 continue ;; 293 esac ; '"$_fp_match"' 294 echo -n "$_pref$_npid" ; 295 _pref=" " 296 ;; 297 esac 298 done' 299 300#echo 1>&2 "proccheck is :$_proccheck:" 301 eval $_proccheck 302} 303 304# 305# wait_for_pids pid [pid ...] 306# spins until none of the pids exist 307# 308wait_for_pids() 309{ 310 _list="$@" 311 if [ -z "$_list" ]; then 312 return 313 fi 314 _prefix= 315 while true; do 316 _nlist=""; 317 for _j in $_list; do 318 if kill -0 $_j 2>/dev/null; then 319 _nlist="${_nlist}${_nlist:+ }$_j" 320 fi 321 done 322 if [ -z "$_nlist" ]; then 323 break 324 fi 325 if [ "$_list" != "$_nlist" ]; then 326 _list=$_nlist 327 echo -n ${_prefix:-"Waiting for PIDS: "}$_list 328 _prefix=", " 329 fi 330 # We want this to be a tight loop for a fast exit 331 sleep 0.05 332 done 333 if [ -n "$_prefix" ]; then 334 echo "." 335 fi 336} 337 338# 339# run_rc_command argument [parameters] 340# Search for argument in the list of supported commands, which is: 341# "start stop restart rcvar status poll ${extra_commands}" 342# If there's a match, run ${argument}_cmd or the default method 343# (see below), and pass the optional list of parameters to it. 344# 345# If argument has a given prefix, then change the operation as follows: 346# Prefix Operation 347# ------ --------- 348# fast Skip the pid check, and set rc_fast=yes 349# force Set ${rcvar} to YES, and set rc_force=yes 350# one Set ${rcvar} to YES 351# 352# The following globals are used: 353# 354# Name Needed Purpose 355# ---- ------ ------- 356# name y Name of script. 357# 358# command n Full path to command. 359# Not needed if ${rc_arg}_cmd is set for 360# each keyword. 361# 362# command_args n Optional args/shell directives for command. 363# 364# command_interpreter n If not empty, command is interpreted, so 365# call check_{pidfile,process}() appropriately. 366# 367# extra_commands n List of extra commands supported. 368# 369# pidfile n If set, use check_pidfile $pidfile $command, 370# otherwise use check_process $command. 371# In either case, only check if $command is set. 372# 373# procname n Process name to check for instead of $command. 374# 375# rcvar n This is checked with checkyesno to determine 376# if the action should be run. 377# 378# ${name}_chroot n Directory to chroot to before running ${command} 379# Requires /usr to be mounted. 380# 381# ${name}_chdir n Directory to cd to before running ${command} 382# (if not using ${name}_chroot). 383# 384# ${name}_flags n Arguments to call ${command} with. 385# NOTE: $flags from the parent environment 386# can be used to override this. 387# 388# ${name}_env n Additional environment variable settings 389# for running ${command} 390# 391# ${name}_nice n Nice level to run ${command} at. 392# 393# ${name}_user n User to run ${command} as, using su(1) if not 394# using ${name}_chroot. 395# Requires /usr to be mounted. 396# 397# ${name}_group n Group to run chrooted ${command} as. 398# Requires /usr to be mounted. 399# 400# ${name}_groups n Comma separated list of supplementary groups 401# to run the chrooted ${command} with. 402# Requires /usr to be mounted. 403# 404# ${rc_arg}_cmd n If set, use this as the method when invoked; 405# Otherwise, use default command (see below) 406# 407# ${rc_arg}_precmd n If set, run just before performing the 408# ${rc_arg}_cmd method in the default 409# operation (i.e, after checking for required 410# bits and process (non)existence). 411# If this completes with a non-zero exit code, 412# don't run ${rc_arg}_cmd. 413# 414# ${rc_arg}_postcmd n If set, run just after performing the 415# ${rc_arg}_cmd method, if that method 416# returned a zero exit code. 417# 418# required_dirs n If set, check for the existence of the given 419# directories before running the default 420# (re)start command. 421# 422# required_files n If set, check for the readability of the given 423# files before running the default (re)start 424# command. 425# 426# required_vars n If set, perform checkyesno on each of the 427# listed variables before running the default 428# (re)start command. 429# 430# Default behaviour for a given argument, if no override method is 431# provided: 432# 433# Argument Default behaviour 434# -------- ----------------- 435# start if !running && checkyesno ${rcvar} 436# ${command} 437# 438# stop if ${pidfile} 439# rc_pid=$(check_pidfile $pidfile $command) 440# else 441# rc_pid=$(check_process $command) 442# kill $sig_stop $rc_pid 443# wait_for_pids $rc_pid 444# ($sig_stop defaults to TERM.) 445# 446# reload Similar to stop, except use $sig_reload instead, 447# and doesn't wait_for_pids. 448# $sig_reload defaults to HUP. 449# 450# restart Run `stop' then `start'. 451# 452# status Show if ${command} is running, etc. 453# 454# poll Wait for ${command} to exit. 455# 456# rcvar Display what rc.conf variable is used (if any). 457# 458# Variables available to methods, and after run_rc_command() has 459# completed: 460# 461# Variable Purpose 462# -------- ------- 463# rc_arg Argument to command, after fast/force/one processing 464# performed 465# 466# rc_flags Flags to start the default command with. 467# Defaults to ${name}_flags, unless overridden 468# by $flags from the environment. 469# This variable may be changed by the precmd method. 470# 471# rc_pid PID of command (if appropriate) 472# 473# rc_fast Not empty if "fast" was provided (q.v.) 474# 475# rc_force Not empty if "force" was provided (q.v.) 476# 477# 478run_rc_command() 479{ 480 rc_arg=$1 481 if [ -z "$name" ]; then 482 err 3 'run_rc_command: $name is not set.' 483 fi 484 485 _rc_prefix= 486 case "$rc_arg" in 487 fast*) # "fast" prefix; don't check pid 488 rc_arg=${rc_arg#fast} 489 rc_fast=yes 490 ;; 491 force*) # "force" prefix; always run 492 rc_force=yes 493 _rc_prefix=force 494 rc_arg=${rc_arg#${_rc_prefix}} 495 if [ -n "${rcvar}" ]; then 496 eval ${rcvar}=YES 497 fi 498 ;; 499 one*) # "one" prefix; set ${rcvar}=yes 500 _rc_prefix=one 501 rc_arg=${rc_arg#${_rc_prefix}} 502 if [ -n "${rcvar}" ]; then 503 eval ${rcvar}=YES 504 fi 505 ;; 506 esac 507 508 _keywords="start stop restart rcvar" 509 if [ -n "$extra_commands" ]; then 510 _keywords="${_keywords} ${extra_commands}" 511 fi 512 rc_pid= 513 _pidcmd= 514 _procname=${procname:-${command}} 515 516 # setup pid check command if not fast 517 if [ -z "$rc_fast" -a -n "$_procname" ]; then 518 if [ -n "$pidfile" ]; then 519 _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' 520 else 521 _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' 522 fi 523 if [ -n "$_pidcmd" ]; then 524 _keywords="${_keywords} status poll" 525 fi 526 fi 527 528 if [ -z "$rc_arg" ]; then 529 rc_usage "$_keywords" 530 fi 531 shift # remove $rc_arg from the positional parameters 532 533 if [ -n "$flags" ]; then # allow override from environment 534 rc_flags=$flags 535 else 536 eval rc_flags=\$${name}_flags 537 fi 538 eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ 539 _nice=\$${name}_nice _user=\$${name}_user \ 540 _group=\$${name}_group _groups=\$${name}_groups \ 541 _env=\"\$${name}_env\" 542 543 if [ -n "$_user" ]; then # unset $_user if running as that user 544 if [ "$_user" = "$(id -un)" ]; then 545 unset _user 546 fi 547 fi 548 549 # if ${rcvar} is set, and $1 is not 550 # "rcvar", then run 551 # checkyesno ${rcvar} 552 # and return if that failed or warn 553 # user and exit when interactive 554 # 555 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then 556 if ! checkyesno ${rcvar}; then 557 # check whether interactive or not 558 if [ -n "$_run_rc_script" ]; then 559 return 0 560 fi 561 for _elem in $_keywords; do 562 if [ "$_elem" = "$rc_arg" ]; then 563 cat 1>&2 <<EOF 564\$${rcvar} is not enabled - see ${rcvar_manpage}. 565Use the following if you wish to perform the operation: 566 $0 one${rc_arg} 567EOF 568 exit 1 569 fi 570 done 571 echo 1>&2 "$0: unknown directive '$rc_arg'." 572 rc_usage "$_keywords" 573 fi 574 fi 575 576 eval $_pidcmd # determine the pid if necessary 577 578 for _elem in $_keywords; do 579 if [ "$_elem" != "$rc_arg" ]; then 580 continue 581 fi 582 583 # if there's a custom ${XXX_cmd}, 584 # run that instead of the default 585 # 586 eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ 587 _postcmd=\$${rc_arg}_postcmd 588 if [ -n "$_cmd" ]; then 589 # if the precmd failed and force 590 # isn't set, exit 591 # 592 if ! eval $_precmd && [ -z "$rc_force" ]; then 593 return 1 594 fi 595 596 if ! eval $_cmd \"\${@}\" && [ -z "$rc_force" ]; then 597 return 1 598 fi 599 eval $_postcmd 600 return 0 601 fi 602 603 if [ ${#} -gt 0 ]; then 604 err 1 "the $rc_arg command does not take any parameters" 605 fi 606 607 case "$rc_arg" in # default operations... 608 609 status) 610 if [ -n "$rc_pid" ]; then 611 echo "${name} is running as pid $rc_pid." 612 else 613 echo "${name} is not running." 614 return 1 615 fi 616 ;; 617 618 start) 619 if [ -n "$rc_pid" ]; then 620 echo 1>&2 "${name} already running? (pid=$rc_pid)." 621 exit 1 622 fi 623 624 if [ ! -x ${_chroot}${command} ]; then 625 return 0 626 fi 627 628 # check for required variables, 629 # directories, and files 630 # 631 for _f in $required_vars; do 632 if ! checkyesno $_f; then 633 warn "\$${_f} is not enabled." 634 if [ -z "$rc_force" ]; then 635 return 1 636 fi 637 fi 638 done 639 for _f in $required_dirs; do 640 if [ ! -d "${_f}/." ]; then 641 warn "${_f} is not a directory." 642 if [ -z "$rc_force" ]; then 643 return 1 644 fi 645 fi 646 done 647 for _f in $required_files; do 648 if [ ! -r "${_f}" ]; then 649 warn "${_f} is not readable." 650 if [ -z "$rc_force" ]; then 651 return 1 652 fi 653 fi 654 done 655 656 # if the precmd failed and force 657 # isn't set, exit 658 # 659 if ! eval $_precmd && [ -z "$rc_force" ]; then 660 return 1 661 fi 662 663 # setup the command to run, and run it 664 # 665 echo "Starting ${name}." 666 if [ -n "$_chroot" ]; then 667 _doit="\ 668${_env:+env $_env }\ 669${_nice:+nice -n $_nice }\ 670chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ 671$_chroot $command $rc_flags $command_args" 672 else 673 _doit="\ 674${_chdir:+cd $_chdir; }\ 675${_env:+env $_env }\ 676${_nice:+nice -n $_nice }\ 677$command $rc_flags $command_args" 678 if [ -n "$_user" ]; then 679 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 680 fi 681 fi 682 683 # if the cmd failed and force 684 # isn't set, exit 685 # 686 if ! eval $_doit && [ -z "$rc_force" ]; then 687 return 1 688 fi 689 690 # finally, run postcmd 691 # 692 eval $_postcmd 693 ;; 694 695 stop) 696 if [ -z "$rc_pid" ]; then 697 if [ -n "$pidfile" ]; then 698 echo 1>&2 \ 699 "${name} not running? (check $pidfile)." 700 else 701 echo 1>&2 "${name} not running?" 702 fi 703 exit 1 704 fi 705 706 # if the precmd failed and force 707 # isn't set, exit 708 # 709 if ! eval $_precmd && [ -z "$rc_force" ]; then 710 return 1 711 fi 712 713 # send the signal to stop 714 # 715 echo "Stopping ${name}." 716 _doit="kill -${sig_stop:-TERM} $rc_pid" 717 if [ -n "$_user" ]; then 718 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 719 fi 720 721 # if the stop cmd failed and force 722 # isn't set, exit 723 # 724 if ! eval $_doit && [ -z "$rc_force" ]; then 725 return 1 726 fi 727 728 # wait for the command to exit, 729 # and run postcmd. 730 wait_for_pids $rc_pid 731 eval $_postcmd 732 ;; 733 734 reload) 735 if [ -z "$rc_pid" ]; then 736 if [ -n "$pidfile" ]; then 737 echo 1>&2 \ 738 "${name} not running? (check $pidfile)." 739 else 740 echo 1>&2 "${name} not running?" 741 fi 742 exit 1 743 fi 744 echo "Reloading ${name} config files." 745 if ! eval $_precmd && [ -z "$rc_force" ]; then 746 return 1 747 fi 748 _doit="kill -${sig_reload:-HUP} $rc_pid" 749 if [ -n "$_user" ]; then 750 _doit="su -m $_user -c 'sh -c \"$_doit\"'" 751 fi 752 if ! eval $_doit && [ -z "$rc_force" ]; then 753 return 1 754 fi 755 eval $_postcmd 756 ;; 757 758 restart) 759 if ! eval $_precmd && [ -z "$rc_force" ]; then 760 return 1 761 fi 762 # prevent restart being called more 763 # than once by any given script 764 # 765 if ${_rc_restart_done:-false}; then 766 return 0 767 fi 768 _rc_restart_done=true 769 770 ( $0 ${_rc_prefix}stop ) 771 $0 ${_rc_prefix}start 772 773 eval $_postcmd 774 ;; 775 776 poll) 777 if [ -n "$rc_pid" ]; then 778 wait_for_pids $rc_pid 779 fi 780 ;; 781 782 rcvar) 783 echo "# $name" 784 if [ -n "$rcvar" ]; then 785 if checkyesno ${rcvar}; then 786 echo "\$${rcvar}=YES" 787 else 788 echo "\$${rcvar}=NO" 789 fi 790 fi 791 ;; 792 793 *) 794 rc_usage "$_keywords" 795 ;; 796 797 esac 798 return 0 799 done 800 801 echo 1>&2 "$0: unknown directive '$rc_arg'." 802 rc_usage "$_keywords" 803 exit 1 804} 805 806# 807# _have_rc_postprocessor 808# Test whether the current script is running in a context that 809# was invoked from /etc/rc with a postprocessor. 810# 811# If the test fails, some variables may be unset to make 812# such tests more efficient in future. 813# 814_have_rc_postprocessor() 815{ 816 # Cheap tests that fd and pid are set, fd is writable. 817 [ -n "${_rc_pid}" ] || { unset _rc_pid; return 1; } 818 [ -n "${_rc_postprocessor_fd}" ] || { unset _rc_pid; return 1; } 819 eval ": >&${_rc_postprocessor_fd}" 2>/dev/null \ 820 || { unset _rc_pid; return 1; } 821 822 return 0 823} 824 825# 826# run_rc_script file arg 827# Start the script `file' with `arg', and correctly handle the 828# return value from the script. If `file' ends with `.sh', it's 829# sourced into the current environment. If `file' appears to be 830# a backup or scratch file, ignore it. Otherwise if it's 831# executable run as a child process. 832# 833# If `file' contains "KEYWORD: interactive" and if we are 834# running inside /etc/rc with postprocessing, then the script's 835# stdout and stderr are redirected to $_rc_original_stdout_fd and 836# $_rc_original_stderr_fd, so the output will be displayed on the 837# console but not intercepted by /etc/rc's postprocessor. 838# 839run_rc_script() 840{ 841 _file=$1 842 _arg=$2 843 if [ -z "$_file" -o -z "$_arg" ]; then 844 err 3 'USAGE: run_rc_script file arg' 845 fi 846 847 _run_rc_script=true 848 849 unset name command command_args command_interpreter \ 850 extra_commands pidfile procname \ 851 rcvar required_dirs required_files required_vars 852 eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd 853 854 _must_redirect=false 855 if _have_rc_postprocessor \ 856 && _has_rcorder_keyword interactive $_file 857 then 858 _must_redirect=true 859 fi 860 861 case "$_file" in 862 *.sh) # run in current shell 863 if $_must_redirect; then 864 print_rc_metadata \ 865 "note:Output from ${_file} is not logged" 866 no_rc_postprocess eval \ 867 'set $_arg ; . $_file' 868 else 869 set $_arg ; . $_file 870 fi 871 ;; 872 *[~#]|*.OLD|*.orig|*,v) # scratch file; skip 873 warn "Ignoring scratch file $_file" 874 ;; 875 *) # run in subshell 876 if [ -x $_file ] && $_must_redirect; then 877 print_rc_metadata \ 878 "note:Output from ${_file} is not logged" 879 if [ -n "$rc_fast_and_loose" ]; then 880 no_rc_postprocess eval \ 881 'set $_arg ; . $_file' 882 else 883 no_rc_postprocess eval \ 884 '( set $_arg ; . $_file )' 885 fi 886 elif [ -x $_file ]; then 887 if [ -n "$rc_fast_and_loose" ]; then 888 set $_arg ; . $_file 889 else 890 ( set $_arg ; . $_file ) 891 fi 892 else 893 warn "Ignoring non-executable file $_file" 894 fi 895 ;; 896 esac 897} 898 899# 900# load_rc_config command 901# Source in the configuration file for a given command. 902# 903load_rc_config() 904{ 905 _command=$1 906 if [ -z "$_command" ]; then 907 err 3 'USAGE: load_rc_config command' 908 fi 909 910 if ${_rc_conf_loaded:-false}; then 911 : 912 else 913 . /etc/rc.conf 914 _rc_conf_loaded=true 915 fi 916 if [ -f /etc/rc.conf.d/"$_command" ]; then 917 . /etc/rc.conf.d/"$_command" 918 fi 919} 920 921# 922# load_rc_config_var cmd var 923# Read the rc.conf(5) var for cmd and set in the 924# current shell, using load_rc_config in a subshell to prevent 925# unwanted side effects from other variable assignments. 926# 927load_rc_config_var() 928{ 929 if [ $# -ne 2 ]; then 930 err 3 'USAGE: load_rc_config_var cmd var' 931 fi 932 eval $(eval '( 933 load_rc_config '$1' >/dev/null; 934 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then 935 echo '$2'=\'\''${'$2'}\'\''; 936 fi 937 )' ) 938} 939 940# 941# rc_usage commands 942# Print a usage string for $0, with `commands' being a list of 943# valid commands. 944# 945rc_usage() 946{ 947 echo -n 1>&2 "Usage: $0 [fast|force|one](" 948 949 _sep= 950 for _elem; do 951 echo -n 1>&2 "$_sep$_elem" 952 _sep="|" 953 done 954 echo 1>&2 ")" 955 exit 1 956} 957 958# 959# err exitval message 960# Display message to stderr and log to the syslog, and exit with exitval. 961# 962err() 963{ 964 exitval=$1 965 shift 966 967 if [ -x /usr/bin/logger ]; then 968 logger "$0: ERROR: $*" 969 fi 970 echo 1>&2 "$0: ERROR: $*" 971 exit $exitval 972} 973 974# 975# warn message 976# Display message to stderr and log to the syslog. 977# 978warn() 979{ 980 if [ -x /usr/bin/logger ]; then 981 logger "$0: WARNING: $*" 982 fi 983 echo 1>&2 "$0: WARNING: $*" 984} 985 986# 987# backup_file action file cur backup 988# Make a backup copy of `file' into `cur', and save the previous 989# version of `cur' as `backup' or use rcs for archiving. 990# 991# This routine checks the value of the backup_uses_rcs variable, 992# which can be either YES or NO. 993# 994# The `action' keyword can be one of the following: 995# 996# add `file' is now being backed up (and is possibly 997# being reentered into the backups system). `cur' 998# is created and RCS files, if necessary, are 999# created as well. 1000# 1001# update `file' has changed and needs to be backed up. 1002# If `cur' exists, it is copied to to `back' or 1003# checked into RCS (if the repository file is old), 1004# and then `file' is copied to `cur'. Another RCS 1005# check in done here if RCS is being used. 1006# 1007# remove `file' is no longer being tracked by the backups 1008# system. If RCS is not being used, `cur' is moved 1009# to `back', otherwise an empty file is checked in, 1010# and then `cur' is removed. 1011# 1012# 1013backup_file() 1014{ 1015 _action=$1 1016 _file=$2 1017 _cur=$3 1018 _back=$4 1019 1020 if checkyesno backup_uses_rcs; then 1021 _msg0="backup archive" 1022 _msg1="update" 1023 1024 # ensure that history file is not locked 1025 if [ -f $_cur,v ]; then 1026 rcs -q -u -U -M $_cur 1027 fi 1028 1029 # ensure after switching to rcs that the 1030 # current backup is not lost 1031 if [ -f $_cur ]; then 1032 # no archive, or current newer than archive 1033 if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then 1034 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1035 rcs -q -kb -U $_cur 1036 co -q -f -u $_cur 1037 fi 1038 fi 1039 1040 case $_action in 1041 add|update) 1042 cp -p $_file $_cur 1043 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1044 rcs -q -kb -U $_cur 1045 co -q -f -u $_cur 1046 chown root:wheel $_cur $_cur,v 1047 ;; 1048 remove) 1049 cp /dev/null $_cur 1050 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur 1051 rcs -q -kb -U $_cur 1052 chown root:wheel $_cur $_cur,v 1053 rm $_cur 1054 ;; 1055 esac 1056 else 1057 case $_action in 1058 add|update) 1059 if [ -f $_cur ]; then 1060 cp -p $_cur $_back 1061 fi 1062 cp -p $_file $_cur 1063 chown root:wheel $_cur 1064 ;; 1065 remove) 1066 mv -f $_cur $_back 1067 ;; 1068 esac 1069 fi 1070} 1071 1072# 1073# handle_fsck_error fsck_exit_code 1074# Take action depending on the return code from fsck. 1075# 1076handle_fsck_error() 1077{ 1078 case $1 in 1079 0) # OK 1080 return 1081 ;; 1082 2) # Needs re-run, still fs errors 1083 echo "File system still has errors; re-run fsck manually!" 1084 ;; 1085 4) # Root modified 1086 echo "Root file system was modified, rebooting ..." 1087 reboot -n 1088 echo "Reboot failed; help!" 1089 ;; 1090 8) # Check failed 1091 echo "Automatic file system check failed; help!" 1092 ;; 1093 12) # Got signal 1094 echo "Boot interrupted." 1095 ;; 1096 *) 1097 echo "Unknown error $1; help!" 1098 ;; 1099 esac 1100 stop_boot 1101} 1102 1103# 1104# _has_rcorder_keyword word file 1105# Check whether a file contains a "# KEYWORD:" comment with a 1106# specified keyword in the style used by rcorder(8). 1107# 1108_has_rcorder_keyword() 1109{ 1110 local word="$1" 1111 local file="$2" 1112 local line 1113 1114 [ -r "$file" ] || return 1 1115 while read line; do 1116 case "${line} " in 1117 "# KEYWORD:"*[\ \ ]"${word}"[\ \ ]*) 1118 return 0 1119 ;; 1120 "#"*) 1121 continue 1122 ;; 1123 *[A-Za-z0-9]*) 1124 # give up at the first non-empty non-comment line 1125 return 1 1126 ;; 1127 esac 1128 done <"$file" 1129 return 1 1130} 1131 1132# 1133# print_rc_metadata string 1134# Print the specified string in such a way that the post-processor 1135# inside /etc/rc will treat it as meta-data. 1136# 1137# If we are not running inside /etc/rc, do nothing. 1138# 1139# For public use by any rc.d script, the string must begin with 1140# "note:", followed by arbitrary text. The intent is that the text 1141# will appear in a log file but not on the console. 1142# 1143# For private use within /etc/rc, the string must contain a 1144# keyword recognised by the rc_postprocess_metadata() function 1145# defined in /etc/rc, followed by a colon, followed by one or more 1146# colon-separated arguments associated with the keyword. 1147# 1148print_rc_metadata() 1149{ 1150 # _rc_postprocessor fd, if defined, is the fd to which we must 1151 # print, prefixing the output with $_rc_metadata_prefix. 1152 # 1153 if _have_rc_postprocessor; then 1154 command printf "%s%s\n" "$rc_metadata_prefix" "$1" \ 1155 >&${_rc_postprocessor_fd} 1156 fi 1157} 1158 1159# 1160# _flush_rc_output 1161# Arrange for output to be flushed, if we are running 1162# inside /etc/rc with postprocessing. 1163# 1164_flush_rc_output() 1165{ 1166 print_rc_metadata "nop" 1167} 1168 1169# 1170# print_rc_normal [-n] string 1171# Print the specified string in such way that it is treated as 1172# normal output, regardless of whether or not we are running 1173# inside /etc/rc with post-processing. 1174# 1175# If "-n" is specified in $1, then the string in $2 is printed 1176# without a newline; otherwise, the string in $1 is printed 1177# with a newline. 1178# 1179# Intended use cases include: 1180# 1181# o An rc.d script can use ``print_rc_normal -n'' to print a 1182# partial line in such a way that it appears immediately 1183# instead of being buffered by rc(8)'s post-processor. 1184# 1185# o An rc.d script that is run via the no_rc_postprocess 1186# function (so most of its output is invisible to rc(8)'s 1187# post-processor) can use print_rc_normal to force some of its 1188# output to be seen by the post-processor. 1189# 1190# 1191print_rc_normal() 1192{ 1193 # print to stdout or _rc_postprocessor_fd, depending on 1194 # whether not we have an rc postprocessor. 1195 # 1196 local fd=1 1197 _have_rc_postprocessor && fd="${_rc_postprocessor_fd}" 1198 case "$1" in 1199 "-n") 1200 command printf "%s" "$2" >&${fd} 1201 _flush_rc_output 1202 ;; 1203 *) 1204 command printf "%s\n" "$1" >&${fd} 1205 ;; 1206 esac 1207} 1208 1209# 1210# no_rc_postprocess cmd... 1211# Execute the specified command in such a way that its output 1212# bypasses the post-processor that handles the output from 1213# most commands that are run inside /etc/rc. If we are not 1214# inside /etc/rc, then just execute the command without special 1215# treatment. 1216# 1217# The intent is that interactive commands can be run via 1218# no_rc_postprocess(), and their output will apear immediately 1219# on the console instead of being hidden or delayed by the 1220# post-processor. An unfortunate consequence of the output 1221# bypassing the post-processor is that the output will not be 1222# logged. 1223# 1224no_rc_postprocess() 1225{ 1226 if _have_rc_postprocessor; then 1227 "$@" >&${_rc_original_stdout_fd} 2>&${_rc_original_stderr_fd} 1228 else 1229 "$@" 1230 fi 1231} 1232 1233# 1234# twiddle 1235# On each call, print a different one of "/", "-", "\\", "|", 1236# followed by a backspace. The most recently printed value is 1237# saved in $_twiddle_state. 1238# 1239# Output is to /dev/tty, so this function may be useful even inside 1240# a script whose output is redirected. 1241# 1242twiddle() 1243{ 1244 case "$_twiddle_state" in 1245 '/') _next='-' ;; 1246 '-') _next='\' ;; 1247 '\') _next='|' ;; 1248 *) _next='/' ;; 1249 esac 1250 command printf "%s\b" "$_next" >/dev/tty 1251 _twiddle_state="$_next" 1252} 1253 1254# 1255# human_exit_code 1256# Print the a human version of the exit code. 1257# 1258human_exit_code() 1259{ 1260 if [ "$1" -lt 127 ] 1261 then 1262 echo "exited with code $1" 1263 elif [ "$(expr $1 % 256)" -eq 127 ] 1264 then 1265 # This cannot really happen because the shell will not 1266 # pass stopped job status out and the exit code is limited 1267 # to 8 bits. This code is here just for completeness. 1268 echo "stopped with signal $(expr $1 / 256)" 1269 else 1270 echo "terminated with signal $(expr $1 - 128)" 1271 fi 1272} 1273 1274# 1275# collapse_backslash_newline 1276# Copy input to output, collapsing <backslash><newline> 1277# to nothing, but leaving other backslashes alone. 1278# 1279collapse_backslash_newline() 1280{ 1281 local line 1282 while read -r line ; do 1283 case "$line" in 1284 *\\) 1285 # print it, without the backslash or newline 1286 command printf "%s" "${line%?}" 1287 ;; 1288 *) 1289 # print it, with a newline 1290 command printf "%s\n" "${line}" 1291 ;; 1292 esac 1293 done 1294} 1295 1296# Shell implementations of basename and dirname, usable before 1297# the /usr file system is mounted. 1298# 1299basename() 1300{ 1301 local file="$1" 1302 local suffix="$2" 1303 local base 1304 1305 base="${file##*/}" # remove up to and including last '/' 1306 base="${base%${suffix}}" # remove suffix, if any 1307 command printf "%s\n" "${base}" 1308} 1309 1310dirname() 1311{ 1312 local file="$1" 1313 local dir 1314 1315 case "$file" in 1316 /*/*) dir="${file%/*}" ;; # common case: absolute path 1317 /*) dir="/" ;; # special case: name in root dir 1318 */*) dir="${file%/*}" ;; # common case: relative path with '/' 1319 *) dir="." ;; # special case: name without '/' 1320 esac 1321 command printf "%s\n" "${dir}" 1322} 1323 1324# Override the normal "echo" and "printf" commands, so that 1325# partial lines printed by rc.d scripts appear immediately, 1326# instead of being buffered by rc(8)'s post-processor. 1327# 1328# Naive use of the echo or printf commands from rc.d scripts, 1329# elsewhere in rc.subr, or anything else that sources rc.subr, 1330# will call these functions. To call the real echo and printf 1331# commands, use "command echo" or "command printf". 1332# 1333echo() 1334{ 1335 command echo "$@" 1336 case "$1" in 1337 '-n') _flush_rc_output ;; 1338 esac 1339} 1340printf() 1341{ 1342 command printf "$@" 1343 case "$1" in 1344 *'\n') : ;; 1345 *) _flush_rc_output ;; 1346 esac 1347} 1348 1349kat() { 1350 local i 1351 local v 1352 for i; do 1353 while read -r v; do 1354 v="${v%%#*}" 1355 if [ -z "$v" ]; then 1356 continue 1357 fi 1358 echo "$v" 1359 done < "$i" 1360 done 1361} 1362 1363_rc_subr_loaded=: 1364