clk_rawdcf.c revision 1.2.14.1 1 /* $NetBSD: clk_rawdcf.c,v 1.2.14.1 2014/12/25 02:28:09 snj Exp $ */
2
3 /*
4 * /src/NTP/REPOSITORY/ntp4-dev/libparse/clk_rawdcf.c,v 4.18 2006/06/22 18:40:01 kardel RELEASE_20060622_A
5 *
6 * clk_rawdcf.c,v 4.18 2006/06/22 18:40:01 kardel RELEASE_20060622_A
7 *
8 * Raw DCF77 pulse clock support
9 *
10 * Copyright (c) 1995-2006 by Frank Kardel <kardel <AT> ntp.org>
11 * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitt Erlangen-Nrnberg, Germany
12 *
13 * Redistribution and use in source and binary forms, with or without
14 * modification, are permitted provided that the following conditions
15 * are met:
16 * 1. Redistributions of source code must retain the above copyright
17 * notice, this list of conditions and the following disclaimer.
18 * 2. Redistributions in binary form must reproduce the above copyright
19 * notice, this list of conditions and the following disclaimer in the
20 * documentation and/or other materials provided with the distribution.
21 * 3. Neither the name of the author nor the names of its contributors
22 * may be used to endorse or promote products derived from this software
23 * without specific prior written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * SUCH DAMAGE.
36 *
37 */
38
39 #ifdef HAVE_CONFIG_H
40 # include <config.h>
41 #endif
42
43 #if defined(REFCLOCK) && defined(CLOCK_PARSE) && defined(CLOCK_RAWDCF)
44
45 #include "ntp_fp.h"
46 #include "ntp_unixtime.h"
47 #include "ntp_calendar.h"
48
49 #include "parse.h"
50 #ifdef PARSESTREAM
51 # include <sys/parsestreams.h>
52 #endif
53
54 #ifndef PARSEKERNEL
55 # include "ntp_stdlib.h"
56 #endif
57
58 /*
59 * DCF77 raw time code
60 *
61 * From "Zur Zeit", Physikalisch-Technische Bundesanstalt (PTB), Braunschweig
62 * und Berlin, Maerz 1989
63 *
64 * Timecode transmission:
65 * AM:
66 * time marks are send every second except for the second before the
67 * next minute mark
68 * time marks consist of a reduction of transmitter power to 25%
69 * of the nominal level
70 * the falling edge is the time indication (on time)
71 * time marks of a 100ms duration constitute a logical 0
72 * time marks of a 200ms duration constitute a logical 1
73 * FM:
74 * see the spec. (basically a (non-)inverted psuedo random phase shift)
75 *
76 * Encoding:
77 * Second Contents
78 * 0 - 10 AM: free, FM: 0
79 * 11 - 14 free
80 * 15 R - alternate antenna
81 * 16 A1 - expect zone change (1 hour before)
82 * 17 - 18 Z1,Z2 - time zone
83 * 0 0 illegal
84 * 0 1 MEZ (MET)
85 * 1 0 MESZ (MED, MET DST)
86 * 1 1 illegal
87 * 19 A2 - expect leap insertion/deletion (1 hour before)
88 * 20 S - start of time code (1)
89 * 21 - 24 M1 - BCD (lsb first) Minutes
90 * 25 - 27 M10 - BCD (lsb first) 10 Minutes
91 * 28 P1 - Minute Parity (even)
92 * 29 - 32 H1 - BCD (lsb first) Hours
93 * 33 - 34 H10 - BCD (lsb first) 10 Hours
94 * 35 P2 - Hour Parity (even)
95 * 36 - 39 D1 - BCD (lsb first) Days
96 * 40 - 41 D10 - BCD (lsb first) 10 Days
97 * 42 - 44 DW - BCD (lsb first) day of week (1: Monday -> 7: Sunday)
98 * 45 - 49 MO - BCD (lsb first) Month
99 * 50 MO0 - 10 Months
100 * 51 - 53 Y1 - BCD (lsb first) Years
101 * 54 - 57 Y10 - BCD (lsb first) 10 Years
102 * 58 P3 - Date Parity (even)
103 * 59 - usually missing (minute indication), except for leap insertion
104 */
105
106 static u_long pps_rawdcf (parse_t *, int, timestamp_t *);
107 static u_long cvt_rawdcf (unsigned char *, int, struct format *, clocktime_t *, void *);
108 static u_long inp_rawdcf (parse_t *, unsigned int, timestamp_t *);
109
110 typedef struct last_tcode {
111 time_t tcode; /* last converted time code */
112 } last_tcode_t;
113
114 #define BUFFER_MAX 61
115
116 clockformat_t clock_rawdcf =
117 {
118 inp_rawdcf, /* DCF77 input handling */
119 cvt_rawdcf, /* raw dcf input conversion */
120 pps_rawdcf, /* examining PPS information */
121 0, /* no private configuration data */
122 "RAW DCF77 Timecode", /* direct decoding / time synthesis */
123
124 BUFFER_MAX, /* bit buffer */
125 sizeof(last_tcode_t)
126 };
127
128 static struct dcfparam
129 {
130 const unsigned char *onebits;
131 const unsigned char *zerobits;
132 } dcfparameter =
133 {
134 (const unsigned char *)"###############RADMLS1248124P124812P1248121241248112481248P??", /* 'ONE' representation */
135 (const unsigned char *)"--------------------s-------p------p----------------------p__" /* 'ZERO' representation */
136 };
137
138 static struct rawdcfcode
139 {
140 char offset; /* start bit */
141 } rawdcfcode[] =
142 {
143 { 0 }, { 15 }, { 16 }, { 17 }, { 19 }, { 20 }, { 21 }, { 25 }, { 28 }, { 29 },
144 { 33 }, { 35 }, { 36 }, { 40 }, { 42 }, { 45 }, { 49 }, { 50 }, { 54 }, { 58 }, { 59 }
145 };
146
147 #define DCF_M 0
148 #define DCF_R 1
149 #define DCF_A1 2
150 #define DCF_Z 3
151 #define DCF_A2 4
152 #define DCF_S 5
153 #define DCF_M1 6
154 #define DCF_M10 7
155 #define DCF_P1 8
156 #define DCF_H1 9
157 #define DCF_H10 10
158 #define DCF_P2 11
159 #define DCF_D1 12
160 #define DCF_D10 13
161 #define DCF_DW 14
162 #define DCF_MO 15
163 #define DCF_MO0 16
164 #define DCF_Y1 17
165 #define DCF_Y10 18
166 #define DCF_P3 19
167
168 static struct partab
169 {
170 char offset; /* start bit of parity field */
171 } partab[] =
172 {
173 { 21 }, { 29 }, { 36 }, { 59 }
174 };
175
176 #define DCF_P_P1 0
177 #define DCF_P_P2 1
178 #define DCF_P_P3 2
179
180 #define DCF_Z_MET 0x2
181 #define DCF_Z_MED 0x1
182
183 static u_long
184 ext_bf(
185 unsigned char *buf,
186 int idx,
187 const unsigned char *zero
188 )
189 {
190 u_long sum = 0;
191 int i, first;
192
193 first = rawdcfcode[idx].offset;
194
195 for (i = rawdcfcode[idx+1].offset - 1; i >= first; i--)
196 {
197 sum <<= 1;
198 sum |= (buf[i] != zero[i]);
199 }
200 return sum;
201 }
202
203 static unsigned
204 pcheck(
205 unsigned char *buf,
206 int idx,
207 const unsigned char *zero
208 )
209 {
210 int i,last;
211 unsigned psum = 1;
212
213 last = partab[idx+1].offset;
214
215 for (i = partab[idx].offset; i < last; i++)
216 psum ^= (buf[i] != zero[i]);
217
218 return psum;
219 }
220
221 static u_long
222 convert_rawdcf(
223 unsigned char *buffer,
224 int size,
225 struct dcfparam *dcfprm,
226 clocktime_t *clock_time
227 )
228 {
229 unsigned char *s = buffer;
230 const unsigned char *b = dcfprm->onebits;
231 const unsigned char *c = dcfprm->zerobits;
232 int i;
233
234 parseprintf(DD_RAWDCF,("parse: convert_rawdcf: \"%s\"\n", buffer));
235
236 if (size < 57)
237 {
238 #ifndef PARSEKERNEL
239 msyslog(LOG_ERR, "parse: convert_rawdcf: INCOMPLETE DATA - time code only has %d bits", size);
240 #endif
241 return CVT_NONE;
242 }
243
244 for (i = 0; i < size; i++)
245 {
246 if ((*s != *b) && (*s != *c))
247 {
248 /*
249 * we only have two types of bytes (ones and zeros)
250 */
251 #ifndef PARSEKERNEL
252 msyslog(LOG_ERR, "parse: convert_rawdcf: BAD DATA - no conversion");
253 #endif
254 return CVT_NONE;
255 }
256 if (*b) b++;
257 if (*c) c++;
258 s++;
259 }
260
261 /*
262 * check Start and Parity bits
263 */
264 if ((ext_bf(buffer, DCF_S, dcfprm->zerobits) == 1) &&
265 pcheck(buffer, DCF_P_P1, dcfprm->zerobits) &&
266 pcheck(buffer, DCF_P_P2, dcfprm->zerobits) &&
267 pcheck(buffer, DCF_P_P3, dcfprm->zerobits))
268 {
269 /*
270 * buffer OK
271 */
272 parseprintf(DD_RAWDCF,("parse: convert_rawdcf: parity check passed\n"));
273
274 clock_time->flags = PARSEB_S_ANTENNA|PARSEB_S_LEAP;
275 clock_time->utctime= 0;
276 clock_time->usecond= 0;
277 clock_time->second = 0;
278 clock_time->minute = ext_bf(buffer, DCF_M10, dcfprm->zerobits);
279 clock_time->minute = TIMES10(clock_time->minute) + ext_bf(buffer, DCF_M1, dcfprm->zerobits);
280 clock_time->hour = ext_bf(buffer, DCF_H10, dcfprm->zerobits);
281 clock_time->hour = TIMES10(clock_time->hour) + ext_bf(buffer, DCF_H1, dcfprm->zerobits);
282 clock_time->day = ext_bf(buffer, DCF_D10, dcfprm->zerobits);
283 clock_time->day = TIMES10(clock_time->day) + ext_bf(buffer, DCF_D1, dcfprm->zerobits);
284 clock_time->month = ext_bf(buffer, DCF_MO0, dcfprm->zerobits);
285 clock_time->month = TIMES10(clock_time->month) + ext_bf(buffer, DCF_MO, dcfprm->zerobits);
286 clock_time->year = ext_bf(buffer, DCF_Y10, dcfprm->zerobits);
287 clock_time->year = TIMES10(clock_time->year) + ext_bf(buffer, DCF_Y1, dcfprm->zerobits);
288
289 switch (ext_bf(buffer, DCF_Z, dcfprm->zerobits))
290 {
291 case DCF_Z_MET:
292 clock_time->utcoffset = -1*60*60;
293 break;
294
295 case DCF_Z_MED:
296 clock_time->flags |= PARSEB_DST;
297 clock_time->utcoffset = -2*60*60;
298 break;
299
300 default:
301 parseprintf(DD_RAWDCF,("parse: convert_rawdcf: BAD TIME ZONE\n"));
302 return CVT_FAIL|CVT_BADFMT;
303 }
304
305 if (ext_bf(buffer, DCF_A1, dcfprm->zerobits))
306 clock_time->flags |= PARSEB_ANNOUNCE;
307
308 if (ext_bf(buffer, DCF_A2, dcfprm->zerobits))
309 clock_time->flags |= PARSEB_LEAPADD; /* default: DCF77 data format deficiency */
310
311 if (ext_bf(buffer, DCF_R, dcfprm->zerobits))
312 clock_time->flags |= PARSEB_ALTERNATE;
313
314 parseprintf(DD_RAWDCF,("parse: convert_rawdcf: TIME CODE OK: %d:%d, %d.%d.%d, flags 0x%lx\n",
315 (int)clock_time->hour, (int)clock_time->minute, (int)clock_time->day, (int)clock_time->month,(int) clock_time->year,
316 (u_long)clock_time->flags));
317 return CVT_OK;
318 }
319 else
320 {
321 /*
322 * bad format - not for us
323 */
324 #ifndef PARSEKERNEL
325 msyslog(LOG_ERR, "parse: convert_rawdcf: parity check FAILED for \"%s\"", buffer);
326 #endif
327 return CVT_FAIL|CVT_BADFMT;
328 }
329 }
330
331 /*
332 * raw dcf input routine - needs to fix up 50 baud
333 * characters for 1/0 decision
334 */
335 static u_long
336 cvt_rawdcf(
337 unsigned char *buffer,
338 int size,
339 struct format *param,
340 clocktime_t *clock_time,
341 void *local
342 )
343 {
344 last_tcode_t *t = (last_tcode_t *)local;
345 unsigned char *s = (unsigned char *)buffer;
346 unsigned char *e = s + size;
347 const unsigned char *b = dcfparameter.onebits;
348 const unsigned char *c = dcfparameter.zerobits;
349 u_long rtc = CVT_NONE;
350 unsigned int i, lowmax, highmax, cutoff, span;
351 #define BITS 9
352 unsigned char histbuf[BITS];
353 /*
354 * the input buffer contains characters with runs of consecutive
355 * bits set. These set bits are an indication of the DCF77 pulse
356 * length. We assume that we receive the pulse at 50 Baud. Thus
357 * a 100ms pulse would generate a 4 bit train (20ms per bit and
358 * start bit)
359 * a 200ms pulse would create all zeroes (and probably a frame error)
360 */
361
362 for (i = 0; i < BITS; i++)
363 {
364 histbuf[i] = 0;
365 }
366
367 cutoff = 0;
368 lowmax = 0;
369
370 while (s < e)
371 {
372 unsigned int ch = *s ^ 0xFF;
373 /*
374 * these lines are left as an excercise to the reader 8-)
375 */
376 if (!((ch+1) & ch) || !*s)
377 {
378
379 for (i = 0; ch; i++)
380 {
381 ch >>= 1;
382 }
383
384 *s = i;
385 histbuf[i]++;
386 cutoff += i;
387 lowmax++;
388 }
389 else
390 {
391 parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: character check for 0x%x@%d FAILED\n", *s, (int)(s - (unsigned char *)buffer)));
392 *s = (unsigned char)~0;
393 rtc = CVT_FAIL|CVT_BADFMT;
394 }
395 s++;
396 }
397
398 if (lowmax)
399 {
400 cutoff /= lowmax;
401 }
402 else
403 {
404 cutoff = 4; /* doesn't really matter - it'll fail anyway, but gives error output */
405 }
406
407 parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: average bit count: %d\n", cutoff));
408
409 lowmax = 0;
410 highmax = 0;
411
412 parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: histogram:"));
413 for (i = 0; i <= cutoff; i++)
414 {
415 lowmax+=histbuf[i] * i;
416 highmax += histbuf[i];
417 parseprintf(DD_RAWDCF,(" %d", histbuf[i]));
418 }
419 parseprintf(DD_RAWDCF, (" <M>"));
420
421 lowmax += highmax / 2;
422
423 if (highmax)
424 {
425 lowmax /= highmax;
426 }
427 else
428 {
429 lowmax = 0;
430 }
431
432 highmax = 0;
433 cutoff = 0;
434
435 for (; i < BITS; i++)
436 {
437 highmax+=histbuf[i] * i;
438 cutoff +=histbuf[i];
439 parseprintf(DD_RAWDCF,(" %d", histbuf[i]));
440 }
441 parseprintf(DD_RAWDCF,("\n"));
442
443 if (cutoff)
444 {
445 highmax /= cutoff;
446 }
447 else
448 {
449 highmax = BITS-1;
450 }
451
452 span = cutoff = lowmax;
453 for (i = lowmax; i <= highmax; i++)
454 {
455 if (histbuf[cutoff] > histbuf[i])
456 {
457 cutoff = i;
458 span = i;
459 }
460 else
461 if (histbuf[cutoff] == histbuf[i])
462 {
463 span = i;
464 }
465 }
466
467 cutoff = (cutoff + span) / 2;
468
469 parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: lower maximum %d, higher maximum %d, cutoff %d\n", lowmax, highmax, cutoff));
470
471 s = (unsigned char *)buffer;
472 while (s < e)
473 {
474 if (*s == (unsigned char)~0)
475 {
476 *s = '?';
477 }
478 else
479 {
480 *s = (*s >= cutoff) ? *b : *c;
481 }
482 s++;
483 if (*b) b++;
484 if (*c) c++;
485 }
486
487 if (rtc == CVT_NONE)
488 {
489 rtc = convert_rawdcf(buffer, size, &dcfparameter, clock_time);
490 if (rtc == CVT_OK)
491 {
492 time_t newtime;
493
494 newtime = parse_to_unixtime(clock_time, &rtc);
495 if ((rtc == CVT_OK) && t)
496 {
497 if ((newtime - t->tcode) == 60) /* guard against multi bit errors */
498 {
499 clock_time->utctime = newtime;
500 }
501 else
502 {
503 rtc = CVT_FAIL|CVT_BADTIME;
504 }
505 t->tcode = newtime;
506 }
507 }
508 }
509
510 return rtc;
511 }
512
513 /*
514 * pps_rawdcf
515 *
516 * currently a very stupid version - should be extended to decode
517 * also ones and zeros (which is easy)
518 */
519 /*ARGSUSED*/
520 static u_long
521 pps_rawdcf(
522 parse_t *parseio,
523 int status,
524 timestamp_t *ptime
525 )
526 {
527 if (!status) /* negative edge for simpler wiring (Rx->DCD) */
528 {
529 parseio->parse_dtime.parse_ptime = *ptime;
530 parseio->parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS;
531 }
532
533 return CVT_NONE;
534 }
535
536 static u_long
537 snt_rawdcf(
538 parse_t *parseio,
539 timestamp_t *ptime
540 )
541 {
542 if ((parseio->parse_dtime.parse_status & CVT_MASK) == CVT_OK)
543 {
544 parseio->parse_dtime.parse_stime = *ptime;
545
546 #ifdef PARSEKERNEL
547 parseio->parse_dtime.parse_time.tv.tv_sec++;
548 #else
549 parseio->parse_dtime.parse_time.fp.l_ui++;
550 #endif
551
552 parseprintf(DD_RAWDCF,("parse: snt_rawdcf: time stamp synthesized offset %d seconds\n", parseio->parse_index - 1));
553
554 return updatetimeinfo(parseio, parseio->parse_lstate);
555 }
556 return CVT_NONE;
557 }
558
559 /*
560 * inp_rawdcf
561 *
562 * grab DCF77 data from input stream
563 */
564 static u_long
565 inp_rawdcf(
566 parse_t *parseio,
567 unsigned int ch,
568 timestamp_t *tstamp
569 )
570 {
571 static struct timeval timeout = { 1, 500000 }; /* 1.5 secongs denote second #60 */
572
573 parseprintf(DD_PARSE, ("inp_rawdcf(0x%lx, 0x%x, ...)\n", (long)parseio, ch));
574
575 parseio->parse_dtime.parse_stime = *tstamp; /* collect timestamp */
576
577 if (parse_timedout(parseio, tstamp, &timeout))
578 {
579 parseprintf(DD_PARSE, ("inp_rawdcf: time out seen\n"));
580
581 (void) parse_end(parseio);
582 (void) parse_addchar(parseio, ch);
583 return PARSE_INP_TIME;
584 }
585 else
586 {
587 unsigned int rtc;
588
589 rtc = parse_addchar(parseio, ch);
590 if (rtc == PARSE_INP_SKIP)
591 {
592 if (snt_rawdcf(parseio, tstamp) == CVT_OK)
593 return PARSE_INP_SYNTH;
594 }
595 return rtc;
596 }
597 }
598
599 #else /* not (REFCLOCK && CLOCK_PARSE && CLOCK_RAWDCF) */
600 int clk_rawdcf_bs;
601 #endif /* not (REFCLOCK && CLOCK_PARSE && CLOCK_RAWDCF) */
602
603 /*
604 * History:
605 *
606 * clk_rawdcf.c,v
607 * Revision 4.18 2006/06/22 18:40:01 kardel
608 * clean up signedness (gcc 4)
609 *
610 * Revision 4.17 2006/01/22 16:01:55 kardel
611 * update version information
612 *
613 * Revision 4.16 2006/01/22 15:51:22 kardel
614 * generate reasonable timecode output on invalid input
615 *
616 * Revision 4.15 2005/08/06 19:17:06 kardel
617 * clean log output
618 *
619 * Revision 4.14 2005/08/06 17:39:40 kardel
620 * cleanup size handling wrt/ to buffer boundaries
621 *
622 * Revision 4.13 2005/04/16 17:32:10 kardel
623 * update copyright
624 *
625 * Revision 4.12 2004/11/14 15:29:41 kardel
626 * support PPSAPI, upgrade Copyright to Berkeley style
627 *
628 * Revision 4.9 1999/12/06 13:42:23 kardel
629 * transfer correctly converted time codes always into tcode
630 *
631 * Revision 4.8 1999/11/28 09:13:50 kardel
632 * RECON_4_0_98F
633 *
634 * Revision 4.7 1999/04/01 20:07:20 kardel
635 * added checking for minutie increment of timestamps in clk_rawdcf.c
636 *
637 * Revision 4.6 1998/06/14 21:09:37 kardel
638 * Sun acc cleanup
639 *
640 * Revision 4.5 1998/06/13 12:04:16 kardel
641 * fix SYSV clock name clash
642 *
643 * Revision 4.4 1998/06/12 15:22:28 kardel
644 * fix prototypes
645 *
646 * Revision 4.3 1998/06/06 18:33:36 kardel
647 * simplified condidional compile expression
648 *
649 * Revision 4.2 1998/05/24 11:04:18 kardel
650 * triggering PPS on negative edge for simpler wiring (Rx->DCD)
651 *
652 * Revision 4.1 1998/05/24 09:39:53 kardel
653 * implementation of the new IO handling model
654 *
655 * Revision 4.0 1998/04/10 19:45:30 kardel
656 * Start 4.0 release version numbering
657 *
658 * from V3 3.24 log info deleted 1998/04/11 kardel
659 *
660 */
661