Home | History | Annotate | Line # | Download | only in examples
udhcpd-p2p.conf revision 1.1.1.1.52.1 
      1 # Sample udhcpd configuration file (/etc/udhcpd.conf)
      2 
      3 # The start and end of the IP lease block
      4 
      5 start 		192.168.42.20	#default: 192.168.0.20
      6 end		192.168.42.254	#default: 192.168.0.254
      7 
      8 
      9 # The interface that udhcpd will use
     10 
     11 interface	wlan2		#default: eth0
     12 
     13 
     14 # The maximum number of leases (includes addresses reserved
     15 # by OFFER's, DECLINE's, and ARP conflicts)
     16 
     17 #max_leases	254		#default: 254
     18 
     19 
     20 # If remaining is true (default), udhcpd will store the time
     21 # remaining for each lease in the udhcpd leases file. This is
     22 # for embedded systems that cannot keep time between reboots.
     23 # If you set remaining to no, the absolute time that the lease
     24 # expires at will be stored in the dhcpd.leases file.
     25 
     26 #remaining	yes		#default: yes
     27 
     28 
     29 # The time period at which udhcpd will write out a dhcpd.leases
     30 # file. If this is 0, udhcpd will never automatically write a
     31 # lease file. (specified in seconds)
     32 
     33 #auto_time	7200		#default: 7200 (2 hours)
     34 
     35 
     36 # The amount of time that an IP will be reserved (leased) for if a
     37 # DHCP decline message is received (seconds).
     38 
     39 #decline_time	3600		#default: 3600 (1 hour)
     40 
     41 
     42 # The amount of time that an IP will be reserved (leased) for if an
     43 # ARP conflct occurs. (seconds
     44 
     45 #conflict_time	3600		#default: 3600 (1 hour)
     46 
     47 
     48 # How long an offered address is reserved (leased) in seconds
     49 
     50 #offer_time	60		#default: 60 (1 minute)
     51 
     52 # If a lease to be given is below this value, the full lease time is
     53 # instead used (seconds).
     54 
     55 #min_lease	60		#default: 60
     56 
     57 
     58 # The location of the leases file
     59 
     60 #lease_file	/var/lib/misc/udhcpd.leases	#default: /var/lib/misc/udhcpd.leases
     61 
     62 # The location of the pid file
     63 pidfile	/var/run/udhcpd-wlan2.pid	#default: /var/run/udhcpd.pid
     64 
     65 # Every time udhcpd writes a leases file, the below script will be called.
     66 # Useful for writing the lease file to flash every few hours.
     67 
     68 #notify_file				#default: (no script)
     69 
     70 #notify_file	dumpleases 	# <--- useful for debugging
     71 
     72 # The following are bootp specific options, setable by udhcpd.
     73 
     74 #siaddr		192.168.0.22		#default: 0.0.0.0
     75 
     76 #sname		zorak			#default: (none)
     77 
     78 #boot_file	/var/nfs_root		#default: (none)
     79 
     80 # The remainder of options are DHCP options and can be specified with the
     81 # keyword 'opt' or 'option'. If an option can take multiple items, such
     82 # as the dns option, they can be listed on the same line, or multiple
     83 # lines. The only option with a default is 'lease'.
     84 
     85 #Examles
     86 opt	dns	192.168.2.1
     87 option	subnet	255.255.255.0
     88 option	domain	atherosowl.com
     89 option	lease	864000		# 10 days of seconds
     90 
     91 
     92 # Currently supported options, for more info, see options.c
     93 #opt subnet
     94 #opt timezone
     95 #opt router
     96 #opt timesvr
     97 #opt namesvr
     98 #opt dns
     99 #opt logsvr
    100 #opt cookiesvr
    101 #opt lprsvr
    102 #opt bootsize
    103 #opt domain
    104 #opt swapsvr
    105 #opt rootpath
    106 #opt ipttl
    107 #opt mtu
    108 #opt broadcast
    109 #opt wins
    110 #opt lease
    111 #opt ntpsrv
    112 #opt tftp
    113 #opt bootfile
    114 
    115 
    116 # Static leases map
    117 #static_lease 00:60:08:11:CE:4E 192.168.0.54
    118 #static_lease 00:60:08:11:CE:3E 192.168.0.44
    119