Home | History | Annotate | Line # | Download | only in zfs
zfs_fletcher.c revision 1.1
      1 /*
      2  * CDDL HEADER START
      3  *
      4  * The contents of this file are subject to the terms of the
      5  * Common Development and Distribution License (the "License").
      6  * You may not use this file except in compliance with the License.
      7  *
      8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
      9  * or http://www.opensolaris.org/os/licensing.
     10  * See the License for the specific language governing permissions
     11  * and limitations under the License.
     12  *
     13  * When distributing Covered Code, include this CDDL HEADER in each
     14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
     15  * If applicable, add the following below this CDDL HEADER, with the
     16  * fields enclosed by brackets "[]" replaced with your own identifying
     17  * information: Portions Copyright [yyyy] [name of copyright owner]
     18  *
     19  * CDDL HEADER END
     20  */
     21 /*
     22  * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
     23  * Use is subject to license terms.
     24  */
     25 
     26 /*
     27  * Fletcher Checksums
     28  * ------------------
     29  *
     30  * ZFS's 2nd and 4th order Fletcher checksums are defined by the following
     31  * recurrence relations:
     32  *
     33  *	a  = a    + f
     34  *	 i    i-1    i-1
     35  *
     36  *	b  = b    + a
     37  *	 i    i-1    i
     38  *
     39  *	c  = c    + b		(fletcher-4 only)
     40  *	 i    i-1    i
     41  *
     42  *	d  = d    + c		(fletcher-4 only)
     43  *	 i    i-1    i
     44  *
     45  * Where
     46  *	a_0 = b_0 = c_0 = d_0 = 0
     47  * and
     48  *	f_0 .. f_(n-1) are the input data.
     49  *
     50  * Using standard techniques, these translate into the following series:
     51  *
     52  *	     __n_			     __n_
     53  *	     \   |			     \   |
     54  *	a  =  >     f			b  =  >     i * f
     55  *	 n   /___|   n - i		 n   /___|	 n - i
     56  *	     i = 1			     i = 1
     57  *
     58  *
     59  *	     __n_			     __n_
     60  *	     \   |  i*(i+1)		     \   |  i*(i+1)*(i+2)
     61  *	c  =  >     ------- f		d  =  >     ------------- f
     62  *	 n   /___|     2     n - i	 n   /___|	  6	   n - i
     63  *	     i = 1			     i = 1
     64  *
     65  * For fletcher-2, the f_is are 64-bit, and [ab]_i are 64-bit accumulators.
     66  * Since the additions are done mod (2^64), errors in the high bits may not
     67  * be noticed.  For this reason, fletcher-2 is deprecated.
     68  *
     69  * For fletcher-4, the f_is are 32-bit, and [abcd]_i are 64-bit accumulators.
     70  * A conservative estimate of how big the buffer can get before we overflow
     71  * can be estimated using f_i = 0xffffffff for all i:
     72  *
     73  * % bc
     74  *  f=2^32-1;d=0; for (i = 1; d<2^64; i++) { d += f*i*(i+1)*(i+2)/6 }; (i-1)*4
     75  * 2264
     76  *  quit
     77  * %
     78  *
     79  * So blocks of up to 2k will not overflow.  Our largest block size is
     80  * 128k, which has 32k 4-byte words, so we can compute the largest possible
     81  * accumulators, then divide by 2^64 to figure the max amount of overflow:
     82  *
     83  * % bc
     84  *  a=b=c=d=0; f=2^32-1; for (i=1; i<=32*1024; i++) { a+=f; b+=a; c+=b; d+=c }
     85  *  a/2^64;b/2^64;c/2^64;d/2^64
     86  * 0
     87  * 0
     88  * 1365
     89  * 11186858
     90  *  quit
     91  * %
     92  *
     93  * So a and b cannot overflow.  To make sure each bit of input has some
     94  * effect on the contents of c and d, we can look at what the factors of
     95  * the coefficients in the equations for c_n and d_n are.  The number of 2s
     96  * in the factors determines the lowest set bit in the multiplier.  Running
     97  * through the cases for n*(n+1)/2 reveals that the highest power of 2 is
     98  * 2^14, and for n*(n+1)*(n+2)/6 it is 2^15.  So while some data may overflow
     99  * the 64-bit accumulators, every bit of every f_i effects every accumulator,
    100  * even for 128k blocks.
    101  *
    102  * If we wanted to make a stronger version of fletcher4 (fletcher4c?),
    103  * we could do our calculations mod (2^32 - 1) by adding in the carries
    104  * periodically, and store the number of carries in the top 32-bits.
    105  *
    106  * --------------------
    107  * Checksum Performance
    108  * --------------------
    109  *
    110  * There are two interesting components to checksum performance: cached and
    111  * uncached performance.  With cached data, fletcher-2 is about four times
    112  * faster than fletcher-4.  With uncached data, the performance difference is
    113  * negligible, since the cost of a cache fill dominates the processing time.
    114  * Even though fletcher-4 is slower than fletcher-2, it is still a pretty
    115  * efficient pass over the data.
    116  *
    117  * In normal operation, the data which is being checksummed is in a buffer
    118  * which has been filled either by:
    119  *
    120  *	1. a compression step, which will be mostly cached, or
    121  *	2. a bcopy() or copyin(), which will be uncached (because the
    122  *	   copy is cache-bypassing).
    123  *
    124  * For both cached and uncached data, both fletcher checksums are much faster
    125  * than sha-256, and slower than 'off', which doesn't touch the data at all.
    126  */
    127 
    128 #include <sys/types.h>
    129 #include <sys/sysmacros.h>
    130 #include <sys/byteorder.h>
    131 #include <sys/zio.h>
    132 #include <sys/spa.h>
    133 
    134 void
    135 fletcher_2_native(const void *buf, uint64_t size, zio_cksum_t *zcp)
    136 {
    137 	const uint64_t *ip = buf;
    138 	const uint64_t *ipend = ip + (size / sizeof (uint64_t));
    139 	uint64_t a0, b0, a1, b1;
    140 
    141 	for (a0 = b0 = a1 = b1 = 0; ip < ipend; ip += 2) {
    142 		a0 += ip[0];
    143 		a1 += ip[1];
    144 		b0 += a0;
    145 		b1 += a1;
    146 	}
    147 
    148 	ZIO_SET_CHECKSUM(zcp, a0, a1, b0, b1);
    149 }
    150 
    151 void
    152 fletcher_2_byteswap(const void *buf, uint64_t size, zio_cksum_t *zcp)
    153 {
    154 	const uint64_t *ip = buf;
    155 	const uint64_t *ipend = ip + (size / sizeof (uint64_t));
    156 	uint64_t a0, b0, a1, b1;
    157 
    158 	for (a0 = b0 = a1 = b1 = 0; ip < ipend; ip += 2) {
    159 		a0 += BSWAP_64(ip[0]);
    160 		a1 += BSWAP_64(ip[1]);
    161 		b0 += a0;
    162 		b1 += a1;
    163 	}
    164 
    165 	ZIO_SET_CHECKSUM(zcp, a0, a1, b0, b1);
    166 }
    167 
    168 void
    169 fletcher_4_native(const void *buf, uint64_t size, zio_cksum_t *zcp)
    170 {
    171 	const uint32_t *ip = buf;
    172 	const uint32_t *ipend = ip + (size / sizeof (uint32_t));
    173 	uint64_t a, b, c, d;
    174 
    175 	for (a = b = c = d = 0; ip < ipend; ip++) {
    176 		a += ip[0];
    177 		b += a;
    178 		c += b;
    179 		d += c;
    180 	}
    181 
    182 	ZIO_SET_CHECKSUM(zcp, a, b, c, d);
    183 }
    184 
    185 void
    186 fletcher_4_byteswap(const void *buf, uint64_t size, zio_cksum_t *zcp)
    187 {
    188 	const uint32_t *ip = buf;
    189 	const uint32_t *ipend = ip + (size / sizeof (uint32_t));
    190 	uint64_t a, b, c, d;
    191 
    192 	for (a = b = c = d = 0; ip < ipend; ip++) {
    193 		a += BSWAP_32(ip[0]);
    194 		b += a;
    195 		c += b;
    196 		d += c;
    197 	}
    198 
    199 	ZIO_SET_CHECKSUM(zcp, a, b, c, d);
    200 }
    201 
    202 void
    203 fletcher_4_incremental_native(const void *buf, uint64_t size,
    204     zio_cksum_t *zcp)
    205 {
    206 	const uint32_t *ip = buf;
    207 	const uint32_t *ipend = ip + (size / sizeof (uint32_t));
    208 	uint64_t a, b, c, d;
    209 
    210 	a = zcp->zc_word[0];
    211 	b = zcp->zc_word[1];
    212 	c = zcp->zc_word[2];
    213 	d = zcp->zc_word[3];
    214 
    215 	for (; ip < ipend; ip++) {
    216 		a += ip[0];
    217 		b += a;
    218 		c += b;
    219 		d += c;
    220 	}
    221 
    222 	ZIO_SET_CHECKSUM(zcp, a, b, c, d);
    223 }
    224 
    225 void
    226 fletcher_4_incremental_byteswap(const void *buf, uint64_t size,
    227     zio_cksum_t *zcp)
    228 {
    229 	const uint32_t *ip = buf;
    230 	const uint32_t *ipend = ip + (size / sizeof (uint32_t));
    231 	uint64_t a, b, c, d;
    232 
    233 	a = zcp->zc_word[0];
    234 	b = zcp->zc_word[1];
    235 	c = zcp->zc_word[2];
    236 	d = zcp->zc_word[3];
    237 
    238 	for (; ip < ipend; ip++) {
    239 		a += BSWAP_32(ip[0]);
    240 		b += a;
    241 		c += b;
    242 		d += c;
    243 	}
    244 
    245 	ZIO_SET_CHECKSUM(zcp, a, b, c, d);
    246 }
    247