Makefile.am revision 1.6
1 ## Process this file with automake to generate Makefile.in 2 # 3 # Copyright (C) 2012-2018 Free Software Foundation, Inc. 4 # 5 # This file is free software; you can redistribute it and/or modify 6 # it under the terms of the GNU General Public License as published by 7 # the Free Software Foundation; either version 3 of the License, or 8 # (at your option) any later version. 9 # 10 # This program is distributed in the hope that it will be useful, 11 # but WITHOUT ANY WARRANTY; without even the implied warranty of 12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 # GNU General Public License for more details. 14 # 15 # You should have received a copy of the GNU General Public License 16 # along with this program; see the file COPYING3. If not see 17 # <http://www.gnu.org/licenses/>. 18 # 19 20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign 21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd 22 23 SUBDIRS = doc po 24 25 tooldir = $(exec_prefix)/$(target_alias) 26 27 ## These aren't set by automake, because they appear in 28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and 29 ## thus is not seen by automake. 30 CC_FOR_BUILD = @CC_FOR_BUILD@ 31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ 32 33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` 34 YFLAGS = -d 35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` 36 LEXLIB = @LEXLIB@ 37 38 # Automake 1.10+ disables lex and yacc output file regeneration if 39 # maintainer mode is disabled. Avoid this. 40 am__skiplex = 41 am__skipyacc = 42 43 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is 44 # -I../zlib, unless we were configured with --with-system-zlib, in which 45 # case both are empty. 46 ZLIB = @zlibdir@ -lz 47 ZLIBINC = @zlibinc@ 48 49 WARN_CFLAGS = @WARN_CFLAGS@ 50 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ 51 NO_WERROR = @NO_WERROR@ 52 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) 53 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC) 54 LIBICONV = @LIBICONV@ 55 56 # these two are almost the same program 57 AR_PROG=ar 58 RANLIB_PROG=ranlib 59 60 # objcopy and strip should be the same program 61 OBJCOPY_PROG=objcopy 62 STRIP_PROG=strip-new 63 64 STRINGS_PROG=strings 65 66 READELF_PROG=readelf 67 68 ELFEDIT_PROG=elfedit 69 70 # These should all be the same program too. 71 SIZE_PROG=size 72 NM_PROG=nm-new 73 OBJDUMP_PROG=objdump 74 75 # This is the demangler, as a standalone program. 76 # Note: This one is used as the installed name too, unlike the above. 77 DEMANGLER_PROG=cxxfilt 78 79 ADDR2LINE_PROG=addr2line 80 81 DLLTOOL_PROG=dlltool 82 WINDRES_PROG=windres 83 WINDMC_PROG=windmc 84 DLLWRAP_PROG=dllwrap 85 86 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) 87 88 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ 89 90 bin_SCRIPTS = @BUILD_INSTALL_MISC@ 91 EXTRA_SCRIPTS = embedspu 92 93 ## Test programs. 94 BFDTEST1_PROG = bfdtest1 95 BFDTEST2_PROG = bfdtest2 96 97 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) 98 99 ## We need a special rule to install the programs which are built with 100 ## -new, and to rename cxxfilt to c++filt. 101 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) 102 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ 103 104 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) 105 106 # Stuff that goes in tooldir/ if appropriate. 107 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf 108 109 BASEDIR = $(srcdir)/.. 110 BFDDIR = $(BASEDIR)/bfd 111 INCDIR = $(BASEDIR)/include 112 113 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ 114 @HDEFINES@ \ 115 @INCINTL@ \ 116 -DLOCALEDIR="\"$(datadir)/locale\"" \ 117 -Dbin_dummy_emulation=$(EMULATION_VECTOR) 118 119 HFILES = \ 120 arsup.h binemul.h bucomm.h budbg.h \ 121 coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \ 122 objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ 123 windmc.h 124 125 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h 126 BUILT_SOURCES = $(GENERATED_HFILES) 127 128 CFILES = \ 129 addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ 130 coffdump.c coffgrok.c cxxfilt.c \ 131 dwarf.c debug.c dlltool.c dllwrap.c \ 132 elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ 133 is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ 134 nm.c not-ranlib.c not-strip.c \ 135 objcopy.c objdump.c prdbg.c \ 136 od-xcoff.c od-macho.c \ 137 rclex.c rdcoff.c rddbg.c readelf.c rename.c \ 138 resbin.c rescoff.c resrc.c resres.c \ 139 size.c srconv.c stabs.c strings.c sysdump.c \ 140 syslex_wrap.c unwind-ia64.c elfedit.c version.c \ 141 windres.c winduni.c wrstabs.c \ 142 windmc.c mclex.c 143 144 GENERATED_CFILES = \ 145 arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ 146 defparse.c deflex.c rcparse.c mcparse.c 147 148 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c 149 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c 150 151 # Extra object files for objdump 152 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ 153 154 # Code shared by all the binutils. 155 BULIBS = bucomm.c version.c filemode.c 156 157 # Code shared by the ELF related programs. 158 ELFLIBS = elfcomm.c 159 160 BFDLIB = ../bfd/libbfd.la 161 162 OPCODES = ../opcodes/libopcodes.la 163 164 LIBIBERTY = ../libiberty/libiberty.a 165 166 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) 167 po/POTFILES.in: @MAINT@ Makefile 168 for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ 169 && mv tmp $(srcdir)/po/POTFILES.in 170 171 EXPECT = expect 172 RUNTEST = runtest 173 174 CC_FOR_TARGET = ` \ 175 if [ -f $$r/../gcc/xgcc ] ; then \ 176 if [ -f $$r/../newlib/Makefile ] ; then \ 177 echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ 178 else \ 179 echo $$r/../gcc/xgcc -B$$r/../gcc/; \ 180 fi; \ 181 else \ 182 if [ "@host@" = "@target@" ] ; then \ 183 echo $(CC); \ 184 else \ 185 echo gcc | sed '$(transform)'; \ 186 fi; \ 187 fi` 188 189 check-DEJAGNU: site.exp 190 srcdir=`cd $(srcdir) && pwd`; export srcdir; \ 191 r=`pwd`; export r; \ 192 LC_ALL=C; export LC_ALL; \ 193 EXPECT=$(EXPECT); export EXPECT; \ 194 runtest=$(RUNTEST); \ 195 if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ 196 CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \ 197 CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ 198 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ 199 $(RUNTESTFLAGS); \ 200 else echo "WARNING: could not find \`runtest'" 1>&2; :;\ 201 fi 202 203 installcheck-local: 204 /bin/sh $(srcdir)/sanity.sh $(bindir) 205 206 # There's no global DEPENDENCIES. So, we must explicitly list everything 207 # which depends on libintl, since we don't know whether LIBINTL_DEP will be 208 # non-empty until configure time. Ugh! 209 size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 210 objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES) 211 nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 212 ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 213 strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 214 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 215 ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 216 cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 217 objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 218 srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 219 sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 220 coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 221 dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 222 windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 223 windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 224 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 225 readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 226 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 227 dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 228 bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 229 bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 230 231 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) 232 233 size_SOURCES = size.c $(BULIBS) 234 235 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 236 237 strings_SOURCES = strings.c $(BULIBS) 238 239 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) 240 readelf_LDADD = $(LIBINTL) $(LIBIBERTY) $(ZLIB) 241 242 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) 243 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) 244 245 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 246 247 nm_new_SOURCES = nm.c $(BULIBS) 248 249 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) 250 EXTRA_objdump_SOURCES = od-xcoff.c 251 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) 252 253 objdump.@OBJEXT@:objdump.c 254 if am__fastdepCC 255 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c 256 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 257 else 258 if AMDEP 259 source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ 260 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 261 endif 262 $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c 263 endif 264 265 cxxfilt_SOURCES = cxxfilt.c $(BULIBS) 266 267 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ 268 emul_$(EMULATION).c $(BULIBS) 269 EXTRA_ar_SOURCES = $(CFILES) 270 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 271 272 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ 273 binemul.c emul_$(EMULATION).c $(BULIBS) 274 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 275 276 addr2line_SOURCES = addr2line.c $(BULIBS) 277 278 # The following is commented out for the conversion to automake. 279 # This rule creates a single binary that switches between ar and ranlib 280 # by looking at argv[0]. Use this kludge to save some disk space. 281 # However, you have to install things by hand. 282 # (That is after 'make install', replace the installed ranlib by a link to ar.) 283 # Alternatively, you can install ranlib.sh as ranlib. 284 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o 285 # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) 286 # -rm -f $(RANLIB_PROG) 287 # -ln $(AR_PROG) $(RANLIB_PROG) 288 # 289 # objcopy and strip in one binary that uses argv[0] to decide its action. 290 # 291 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o 292 # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) 293 # -rm -f $(STRIP_PROG) 294 # -ln $(OBJCOPY_PROG) $(STRIP_PROG) 295 296 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 297 ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c 298 ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c 299 ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c 300 301 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 302 ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h 303 304 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 305 $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 306 307 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h 308 $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c 309 310 sysinfo.@OBJEXT@: sysinfo.c 311 if [ -r sysinfo.c ]; then \ 312 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ 313 else \ 314 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ 315 fi 316 317 bin2c$(EXEEXT_FOR_BUILD): bin2c.c 318 $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c 319 320 embedspu: embedspu.sh Makefile 321 awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ 322 chmod a+x $@ 323 324 # We need these for parallel make. 325 sysinfo.h: sysinfo.c 326 327 # Disable -Werror, if it has been enabled, since old versions of bison/ 328 # yacc will produce working code which contain compile time warnings. 329 arparse.@OBJEXT@: arparse.c 330 if am__fastdepCC 331 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 332 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 333 else 334 if AMDEP 335 source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 336 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 337 endif 338 $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 339 endif 340 341 arlex.@OBJEXT@: arlex.c 342 if am__fastdepCC 343 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 344 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 345 else 346 if AMDEP 347 source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 348 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 349 endif 350 $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 351 endif 352 353 sysroff.@OBJEXT@: sysroff.c 354 if am__fastdepCC 355 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 356 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 357 else 358 if AMDEP 359 source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 360 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 361 endif 362 $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 363 endif 364 365 defparse.@OBJEXT@: defparse.c 366 if am__fastdepCC 367 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 368 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 369 else 370 if AMDEP 371 source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 372 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 373 endif 374 $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 375 endif 376 377 deflex.@OBJEXT@: deflex.c 378 if am__fastdepCC 379 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 380 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 381 else 382 if AMDEP 383 source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 384 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 385 endif 386 $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 387 endif 388 389 rcparse.@OBJEXT@: rcparse.c 390 if am__fastdepCC 391 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 392 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 393 else 394 if AMDEP 395 source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 396 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 397 endif 398 $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 399 endif 400 401 mcparse.@OBJEXT@: mcparse.c 402 if am__fastdepCC 403 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 404 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 405 else 406 if AMDEP 407 source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 408 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 409 endif 410 $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 411 endif 412 413 rclex.@OBJEXT@: rclex.c 414 if am__fastdepCC 415 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) 416 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 417 else 418 if AMDEP 419 source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 420 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 421 endif 422 $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) 423 endif 424 425 mclex.@OBJEXT@: mclex.c 426 if am__fastdepCC 427 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) 428 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 429 else 430 if AMDEP 431 source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 432 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 433 endif 434 $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) 435 endif 436 437 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) 438 srconv.@OBJEXT@: sysroff.c 439 440 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) 441 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 442 443 dlltool.@OBJEXT@: 444 if am__fastdepCC 445 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 446 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 447 else 448 if AMDEP 449 source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ 450 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 451 endif 452 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 453 endif 454 455 rescoff.@OBJEXT@: 456 if am__fastdepCC 457 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 458 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 459 else 460 if AMDEP 461 source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 462 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 463 endif 464 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 465 endif 466 467 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) 468 469 sysdump_SOURCES = sysdump.c $(BULIBS) 470 sysdump.@OBJEXT@: sysroff.c 471 472 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ 473 winduni.c resres.c $(BULIBS) 474 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 475 476 windmc_SOURCES = windmc.c mcparse.y mclex.c \ 477 winduni.c $(BULIBS) 478 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 479 480 dllwrap_SOURCES = dllwrap.c version.c 481 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) 482 483 484 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \ 485 syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ 486 mcparse.h mcparse.c embedspu.sh 487 488 diststuff: $(EXTRA_DIST) info 489 all: info 490 491 # development.sh is used to determine -Werror default. 492 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh 493 494 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu 495 496 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ 497 binutils.log binutils.sum abcdefgh* 498 mostlyclean-local: 499 -rm -rf tmpdir 500 501 .PHONY: install-exec-local 502 503 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) 504 @list='$(RENAMED_PROGS)'; for p in $$list; do \ 505 if test -f $$p$(EXEEXT); then \ 506 echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ 507 $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ 508 else :; fi; \ 509 done 510 $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin 511 for i in $(TOOL_PROGS); do \ 512 if [ -f $$i$(EXEEXT) ]; then \ 513 j=`echo $$i | sed -e 's/-new//'`; \ 514 k=`echo $$j | sed '$(transform)'`; \ 515 if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ 516 rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 517 ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ 518 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 519 fi; \ 520 else true; \ 521 fi; \ 522 done 523
Indexes created Mon Mar 02 05:31:46 UTC 2026