Makefile.am revision 1.7
1 ## Process this file with automake to generate Makefile.in 2 # 3 # Copyright (C) 2012-2020 Free Software Foundation, Inc. 4 # 5 # This file is free software; you can redistribute it and/or modify 6 # it under the terms of the GNU General Public License as published by 7 # the Free Software Foundation; either version 3 of the License, or 8 # (at your option) any later version. 9 # 10 # This program is distributed in the hope that it will be useful, 11 # but WITHOUT ANY WARRANTY; without even the implied warranty of 12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 # GNU General Public License for more details. 14 # 15 # You should have received a copy of the GNU General Public License 16 # along with this program; see the file COPYING3. If not see 17 # <http://www.gnu.org/licenses/>. 18 # 19 20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects 21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd 22 23 SUBDIRS = doc po 24 25 tooldir = $(exec_prefix)/$(target_alias) 26 27 ## These aren't set by automake, because they appear in 28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and 29 ## thus is not seen by automake. 30 CC_FOR_BUILD = @CC_FOR_BUILD@ 31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@ 32 33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi` 34 YFLAGS = -d 35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi` 36 LEXLIB = @LEXLIB@ 37 38 # Automake 1.10+ disables lex and yacc output file regeneration if 39 # maintainer mode is disabled. Avoid this. 40 am__skiplex = 41 am__skipyacc = 42 43 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is 44 # -I../zlib, unless we were configured with --with-system-zlib, in which 45 # case both are empty. 46 ZLIB = @zlibdir@ -lz 47 ZLIBINC = @zlibinc@ 48 49 WARN_CFLAGS = @WARN_CFLAGS@ 50 WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@ 51 NO_WERROR = @NO_WERROR@ 52 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC) 53 AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC) 54 LIBICONV = @LIBICONV@ 55 56 LIBDEBUGINFOD = @LIBDEBUGINFOD@ 57 58 # these two are almost the same program 59 AR_PROG=ar 60 RANLIB_PROG=ranlib 61 62 # objcopy and strip should be the same program 63 OBJCOPY_PROG=objcopy 64 STRIP_PROG=strip-new 65 66 STRINGS_PROG=strings 67 68 READELF_PROG=readelf 69 70 ELFEDIT_PROG=elfedit 71 72 # These should all be the same program too. 73 SIZE_PROG=size 74 NM_PROG=nm-new 75 OBJDUMP_PROG=objdump 76 77 # This is the demangler, as a standalone program. 78 # Note: This one is used as the installed name too, unlike the above. 79 DEMANGLER_PROG=cxxfilt 80 81 ADDR2LINE_PROG=addr2line 82 83 DLLTOOL_PROG=dlltool 84 WINDRES_PROG=windres 85 WINDMC_PROG=windmc 86 DLLWRAP_PROG=dllwrap 87 88 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) 89 90 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@ 91 92 bin_SCRIPTS = @BUILD_INSTALL_MISC@ 93 EXTRA_SCRIPTS = embedspu 94 95 ## Test programs. 96 BFDTEST1_PROG = bfdtest1 97 BFDTEST2_PROG = bfdtest2 98 GENTESTDLLS_PROG = testsuite/gentestdlls 99 100 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG) 101 102 ## We need a special rule to install the programs which are built with 103 ## -new, and to rename cxxfilt to c++filt. 104 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG) 105 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@ 106 107 EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG) 108 109 # Stuff that goes in tooldir/ if appropriate. 110 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf 111 112 BASEDIR = $(srcdir)/.. 113 BFDDIR = $(BASEDIR)/bfd 114 INCDIR = $(BASEDIR)/include 115 116 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \ 117 @HDEFINES@ \ 118 @INCINTL@ \ 119 -DLOCALEDIR="\"$(datadir)/locale\"" \ 120 -Dbin_dummy_emulation=$(EMULATION_VECTOR) 121 122 HFILES = \ 123 arsup.h binemul.h bucomm.h budbg.h \ 124 coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \ 125 objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \ 126 windmc.h 127 128 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h 129 BUILT_SOURCES = $(GENERATED_HFILES) 130 131 CFILES = \ 132 addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \ 133 coffdump.c coffgrok.c cxxfilt.c \ 134 dwarf.c debug.c dlltool.c dllwrap.c \ 135 elfcomm.c emul_aix.c emul_vanilla.c filemode.c \ 136 is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \ 137 nm.c not-ranlib.c not-strip.c \ 138 objcopy.c objdump.c prdbg.c \ 139 od-xcoff.c od-macho.c \ 140 rclex.c rdcoff.c rddbg.c readelf.c rename.c \ 141 resbin.c rescoff.c resrc.c resres.c \ 142 size.c srconv.c stabs.c strings.c sysdump.c \ 143 syslex_wrap.c unwind-ia64.c elfedit.c version.c \ 144 windres.c winduni.c wrstabs.c \ 145 windmc.c mclex.c 146 147 GENERATED_CFILES = \ 148 arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ 149 defparse.c deflex.c rcparse.c mcparse.c 150 151 DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c 152 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c 153 154 # Extra object files for objdump 155 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@ 156 157 # Code shared by all the binutils. 158 BULIBS = bucomm.c version.c filemode.c 159 160 # Code shared by the ELF related programs. 161 ELFLIBS = elfcomm.c 162 163 BFDLIB = ../bfd/libbfd.la 164 165 OPCODES = ../opcodes/libopcodes.la 166 167 LIBCTF = ../libctf/libctf.la 168 LIBCTF_NOBFD = ../libctf/libctf-nobfd.la 169 170 LIBIBERTY = ../libiberty/libiberty.a 171 172 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES) 173 po/POTFILES.in: @MAINT@ Makefile 174 for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \ 175 && mv tmp $(srcdir)/po/POTFILES.in 176 177 EXPECT = expect 178 RUNTEST = runtest 179 180 CC_FOR_TARGET = ` \ 181 if [ -f $$r/../gcc/xgcc ] ; then \ 182 if [ -f $$r/../newlib/Makefile ] ; then \ 183 echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ 184 else \ 185 echo $$r/../gcc/xgcc -B$$r/../gcc/; \ 186 fi; \ 187 else \ 188 if [ "@host@" = "@target@" ] ; then \ 189 echo $(CC); \ 190 else \ 191 echo gcc | sed '$(transform)'; \ 192 fi; \ 193 fi` 194 195 check-DEJAGNU: site.exp 196 srcdir=`cd $(srcdir) && pwd`; export srcdir; \ 197 r=`pwd`; export r; \ 198 LC_ALL=C; export LC_ALL; \ 199 EXPECT=$(EXPECT); export EXPECT; \ 200 runtest=$(RUNTEST); \ 201 if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ 202 CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \ 203 CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \ 204 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ 205 $(RUNTESTFLAGS); \ 206 else echo "WARNING: could not find \`runtest'" 1>&2; :;\ 207 fi 208 209 development.exp: $(BFDDIR)/development.sh 210 $(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh \ 211 | $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@ 212 213 installcheck-local: 214 /bin/sh $(srcdir)/sanity.sh $(bindir) 215 216 # There's no global DEPENDENCIES. So, we must explicitly list everything 217 # which depends on libintl, since we don't know whether LIBINTL_DEP will be 218 # non-empty until configure time. Ugh! 219 size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 220 objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES) 221 nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 222 ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 223 strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 224 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 225 ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 226 cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 227 objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 228 srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 229 sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 230 coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 231 dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 232 windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 233 windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 234 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 235 readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD) 236 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 237 dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) 238 bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 239 bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) 240 241 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL) 242 243 size_SOURCES = size.c $(BULIBS) 244 245 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 246 247 strings_SOURCES = strings.c $(BULIBS) 248 249 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS) 250 readelf_LDADD = $(LIBINTL) $(LIBCTF_NOBFD) $(LIBIBERTY) $(ZLIB) $(LIBDEBUGINFOD) 251 252 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS) 253 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY) 254 255 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS) 256 257 nm_new_SOURCES = nm.c $(BULIBS) 258 259 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS) 260 EXTRA_objdump_SOURCES = od-xcoff.c 261 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(LIBDEBUGINFOD) 262 263 objdump.@OBJEXT@:objdump.c 264 if am__fastdepCC 265 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c 266 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 267 else 268 if AMDEP 269 source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@ 270 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 271 endif 272 $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c 273 endif 274 275 cxxfilt_SOURCES = cxxfilt.c $(BULIBS) 276 277 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \ 278 emul_$(EMULATION).c $(BULIBS) 279 EXTRA_ar_SOURCES = $(CFILES) 280 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 281 282 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \ 283 binemul.c emul_$(EMULATION).c $(BULIBS) 284 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 285 286 addr2line_SOURCES = addr2line.c $(BULIBS) 287 288 # The following is commented out for the conversion to automake. 289 # This rule creates a single binary that switches between ar and ranlib 290 # by looking at argv[0]. Use this kludge to save some disk space. 291 # However, you have to install things by hand. 292 # (That is after 'make install', replace the installed ranlib by a link to ar.) 293 # Alternatively, you can install ranlib.sh as ranlib. 294 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o 295 # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) 296 # -rm -f $(RANLIB_PROG) 297 # -ln $(AR_PROG) $(RANLIB_PROG) 298 # 299 # objcopy and strip in one binary that uses argv[0] to decide its action. 300 # 301 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o 302 # $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) 303 # -rm -f $(STRIP_PROG) 304 # -ln $(OBJCOPY_PROG) $(STRIP_PROG) 305 306 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 307 ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c 308 ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c 309 ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c 310 311 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 312 ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h 313 314 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 315 $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@ 316 317 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h 318 $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c 319 320 sysinfo.@OBJEXT@: sysinfo.c 321 if [ -r sysinfo.c ]; then \ 322 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \ 323 else \ 324 $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \ 325 fi 326 327 bin2c$(EXEEXT_FOR_BUILD): bin2c.c 328 $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c 329 330 embedspu: embedspu.sh Makefile 331 awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@ 332 chmod a+x $@ 333 334 # We need these for parallel make. 335 sysinfo.h: sysinfo.c 336 337 # Disable -Werror, if it has been enabled, since old versions of bison/ 338 # yacc will produce working code which contain compile time warnings. 339 arparse.@OBJEXT@: arparse.c 340 if am__fastdepCC 341 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 342 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 343 else 344 if AMDEP 345 source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 346 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 347 endif 348 $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR) 349 endif 350 351 arlex.@OBJEXT@: arlex.c 352 if am__fastdepCC 353 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 354 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 355 else 356 if AMDEP 357 source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 358 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 359 endif 360 $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR) 361 endif 362 363 sysroff.@OBJEXT@: sysroff.c 364 if am__fastdepCC 365 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 366 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 367 else 368 if AMDEP 369 source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 370 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 371 endif 372 $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR) 373 endif 374 375 defparse.@OBJEXT@: defparse.c 376 if am__fastdepCC 377 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 378 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 379 else 380 if AMDEP 381 source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 382 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 383 endif 384 $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR) 385 endif 386 387 deflex.@OBJEXT@: deflex.c 388 if am__fastdepCC 389 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 390 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 391 else 392 if AMDEP 393 source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 394 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 395 endif 396 $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR) 397 endif 398 399 rcparse.@OBJEXT@: rcparse.c 400 if am__fastdepCC 401 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 402 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 403 else 404 if AMDEP 405 source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 406 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 407 endif 408 $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR) 409 endif 410 411 mcparse.@OBJEXT@: mcparse.c 412 if am__fastdepCC 413 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 414 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 415 else 416 if AMDEP 417 source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@ 418 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 419 endif 420 $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR) 421 endif 422 423 rclex.@OBJEXT@: rclex.c 424 if am__fastdepCC 425 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR) 426 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 427 else 428 if AMDEP 429 source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 430 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 431 endif 432 $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR) 433 endif 434 435 mclex.@OBJEXT@: mclex.c 436 if am__fastdepCC 437 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR) 438 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 439 else 440 if AMDEP 441 source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@ 442 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 443 endif 444 $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR) 445 endif 446 447 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) 448 srconv.@OBJEXT@: sysroff.c 449 450 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) 451 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) 452 453 dlltool.@OBJEXT@: 454 if am__fastdepCC 455 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 456 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 457 else 458 if AMDEP 459 source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@ 460 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 461 endif 462 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c 463 endif 464 465 rescoff.@OBJEXT@: 466 if am__fastdepCC 467 $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 468 mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po 469 else 470 if AMDEP 471 source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@ 472 DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ 473 endif 474 $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c 475 endif 476 477 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) 478 479 sysdump_SOURCES = sysdump.c $(BULIBS) 480 sysdump.@OBJEXT@: sysroff.c 481 482 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \ 483 winduni.c resres.c $(BULIBS) 484 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 485 486 windmc_SOURCES = windmc.c mcparse.y mclex.c \ 487 winduni.c $(BULIBS) 488 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV) 489 490 dllwrap_SOURCES = dllwrap.c version.c 491 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL) 492 493 494 EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \ 495 syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \ 496 mcparse.h mcparse.c embedspu.sh 497 498 diststuff: $(EXTRA_DIST) info 499 all: info 500 501 # development.sh is used to determine -Werror default. 502 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh 503 504 EXTRA_DEJAGNU_SITE_CONFIG = development.exp 505 506 DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \ 507 site.bak embedspu 508 509 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \ 510 binutils.log binutils.sum abcdefgh* 511 mostlyclean-local: 512 -rm -rf tmpdir 513 514 .PHONY: install-exec-local 515 516 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS) 517 @list='$(RENAMED_PROGS)'; for p in $$list; do \ 518 if test -f $$p$(EXEEXT); then \ 519 echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ 520 $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ 521 else :; fi; \ 522 done 523 $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin 524 for i in $(TOOL_PROGS); do \ 525 if [ -f $$i$(EXEEXT) ]; then \ 526 j=`echo $$i | sed -e 's/-new//'`; \ 527 k=`echo $$j | sed '$(transform)'`; \ 528 if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \ 529 rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 530 ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \ 531 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \ 532 fi; \ 533 else true; \ 534 fi; \ 535 done 536
Indexes created Mon Mar 02 05:31:46 UTC 2026