configure.html revision 1.1.1.15
1 1.1.1.14 mrg <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> 2 1.1.1.14 mrg <html> 3 1.1.1.15 mrg <!-- Copyright (C) 1988-2019 Free Software Foundation, Inc. 4 1.1 mrg 5 1.1.1.14 mrg Permission is granted to copy, distribute and/or modify this document 6 1.1.1.3 skrll under the terms of the GNU Free Documentation License, Version 1.3 or 7 1.1 mrg any later version published by the Free Software Foundation; with no 8 1.1 mrg Invariant Sections, the Front-Cover texts being (a) (see below), and 9 1.1 mrg with the Back-Cover Texts being (b) (see below). A copy of the 10 1.1.1.14 mrg license is included in the section entitled "GNU 11 1.1.1.14 mrg Free Documentation License". 12 1.1 mrg 13 1.1 mrg (a) The FSF's Front-Cover Text is: 14 1.1 mrg 15 1.1.1.14 mrg A GNU Manual 16 1.1 mrg 17 1.1 mrg (b) The FSF's Back-Cover Text is: 18 1.1 mrg 19 1.1.1.14 mrg You have freedom to copy and modify this GNU Manual, like GNU 20 1.1 mrg software. Copies published by the Free Software Foundation raise 21 1.1.1.14 mrg funds for GNU development. --> 22 1.1.1.14 mrg <!-- Created by GNU Texinfo 6.5, http://www.gnu.org/software/texinfo/ --> 23 1.1.1.14 mrg <head> 24 1.1.1.14 mrg <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> 25 1.1.1.14 mrg <title>Installing GCC</title> 26 1.1.1.14 mrg 27 1.1.1.14 mrg <meta name="description" content="Installing GCC"> 28 1.1.1.14 mrg <meta name="keywords" content="Installing GCC"> 29 1.1.1.14 mrg <meta name="resource-type" content="document"> 30 1.1.1.14 mrg <meta name="distribution" content="global"> 31 1.1.1.14 mrg <meta name="Generator" content="makeinfo"> 32 1.1.1.14 mrg <style type="text/css"> 33 1.1.1.14 mrg <!-- 34 1.1.1.14 mrg a.summary-letter {text-decoration: none} 35 1.1.1.14 mrg blockquote.indentedblock {margin-right: 0em} 36 1.1.1.14 mrg blockquote.smallindentedblock {margin-right: 0em; font-size: smaller} 37 1.1.1.14 mrg blockquote.smallquotation {font-size: smaller} 38 1.1.1.14 mrg div.display {margin-left: 3.2em} 39 1.1.1.14 mrg div.example {margin-left: 3.2em} 40 1.1.1.14 mrg div.lisp {margin-left: 3.2em} 41 1.1.1.14 mrg div.smalldisplay {margin-left: 3.2em} 42 1.1.1.14 mrg div.smallexample {margin-left: 3.2em} 43 1.1.1.14 mrg div.smalllisp {margin-left: 3.2em} 44 1.1.1.14 mrg kbd {font-style: oblique} 45 1.1.1.14 mrg pre.display {font-family: inherit} 46 1.1.1.14 mrg pre.format {font-family: inherit} 47 1.1.1.14 mrg pre.menu-comment {font-family: serif} 48 1.1.1.14 mrg pre.menu-preformatted {font-family: serif} 49 1.1.1.14 mrg pre.smalldisplay {font-family: inherit; font-size: smaller} 50 1.1.1.14 mrg pre.smallexample {font-size: smaller} 51 1.1.1.14 mrg pre.smallformat {font-family: inherit; font-size: smaller} 52 1.1.1.14 mrg pre.smalllisp {font-size: smaller} 53 1.1.1.14 mrg span.nolinebreak {white-space: nowrap} 54 1.1.1.14 mrg span.roman {font-family: initial; font-weight: normal} 55 1.1.1.14 mrg span.sansserif {font-family: sans-serif; font-weight: normal} 56 1.1.1.14 mrg ul.no-bullet {list-style: none} 57 1.1.1.14 mrg --> 58 1.1.1.14 mrg </style> 59 1.1.1.14 mrg 60 1.1.1.14 mrg 61 1.1 mrg </head> 62 1.1.1.13 mrg 63 1.1.1.14 mrg <body lang="en"> 64 1.1.1.14 mrg <h1 class="settitle" align="center">Installing GCC</h1> 65 1.1.1.14 mrg 66 1.1.1.14 mrg 67 1.1.1.14 mrg 68 1.1.1.14 mrg 69 1.1.1.14 mrg 70 1.1.1.14 mrg 71 1.1.1.13 mrg 72 1.1.1.13 mrg 73 1.1.1.14 mrg 74 1.1.1.14 mrg 75 1.1.1.14 mrg 76 1.1.1.14 mrg 77 1.1.1.14 mrg 78 1.1.1.14 mrg 79 1.1.1.14 mrg 80 1.1.1.14 mrg 81 1.1.1.14 mrg 82 1.1.1.14 mrg 83 1.1.1.14 mrg 84 1.1.1.14 mrg <a name="index-Configuration"></a> 85 1.1.1.14 mrg <a name="index-Installing-GCC_003a-Configuration"></a> 86 1.1.1.14 mrg 87 1.1.1.14 mrg <p>Like most GNU software, GCC must be configured before it can be built. 88 1.1.1.14 mrg This document describes the recommended configuration procedure 89 1.1.1.14 mrg for both native and cross targets. 90 1.1.1.14 mrg </p> 91 1.1.1.14 mrg <p>We use <var>srcdir</var> to refer to the toplevel source directory for 92 1.1.1.14 mrg GCC; we use <var>objdir</var> to refer to the toplevel build/object directory. 93 1.1.1.14 mrg </p> 94 1.1.1.14 mrg <p>If you obtained the sources by cloning the repository, <var>srcdir</var> 95 1.1.1.14 mrg must refer to the top <samp>gcc</samp> directory, the one where the 96 1.1.1.14 mrg <samp>MAINTAINERS</samp> file can be found, and not its <samp>gcc</samp> 97 1.1.1.14 mrg subdirectory, otherwise the build will fail. 98 1.1.1.14 mrg </p> 99 1.1.1.14 mrg <p>If either <var>srcdir</var> or <var>objdir</var> is located on an automounted NFS 100 1.1.1.14 mrg file system, the shell’s built-in <code>pwd</code> command will return 101 1.1 mrg temporary pathnames. Using these can lead to various sorts of build 102 1.1.1.14 mrg problems. To avoid this issue, set the <code>PWDCMD</code> environment 103 1.1.1.14 mrg variable to an automounter-aware <code>pwd</code> command, e.g., 104 1.1.1.14 mrg <code>pawd</code> or ‘<samp>amq -w</samp>’, during the configuration and build 105 1.1 mrg phases. 106 1.1.1.14 mrg </p> 107 1.1.1.14 mrg <p>First, we <strong>highly</strong> recommend that GCC be built into a 108 1.1 mrg separate directory from the sources which does <strong>not</strong> reside 109 1.1 mrg within the source tree. This is how we generally build GCC; building 110 1.1.1.14 mrg where <var>srcdir</var> == <var>objdir</var> should still work, but doesn’t 111 1.1 mrg get extensive testing; building where <var>objdir</var> is a subdirectory 112 1.1 mrg of <var>srcdir</var> is unsupported. 113 1.1.1.14 mrg </p> 114 1.1.1.14 mrg <p>If you have previously built GCC in the same directory for a 115 1.1.1.14 mrg different target machine, do ‘<samp>make distclean</samp>’ to delete all files 116 1.1.1.14 mrg that might be invalid. One of the files this deletes is <samp>Makefile</samp>; 117 1.1.1.14 mrg if ‘<samp>make distclean</samp>’ complains that <samp>Makefile</samp> does not exist 118 1.1.1.14 mrg or issues a message like “don’t know how to make distclean” it probably 119 1.1 mrg means that the directory is already suitably clean. However, with the 120 1.1 mrg recommended method of building in a separate <var>objdir</var>, you should 121 1.1 mrg simply use a different <var>objdir</var> for each target. 122 1.1.1.14 mrg </p> 123 1.1.1.14 mrg <p>Second, when configuring a native system, either <code>cc</code> or 124 1.1.1.14 mrg <code>gcc</code> must be in your path or you must set <code>CC</code> in 125 1.1 mrg your environment before running configure. Otherwise the configuration 126 1.1 mrg scripts may fail. 127 1.1.1.14 mrg </p> 128 1.1 mrg 129 1.1.1.14 mrg <p>To configure GCC: 130 1.1.1.14 mrg </p> 131 1.1.1.14 mrg <div class="smallexample"> 132 1.1.1.14 mrg <pre class="smallexample">% mkdir <var>objdir</var> 133 1.1.1.14 mrg % cd <var>objdir</var> 134 1.1.1.14 mrg % <var>srcdir</var>/configure [<var>options</var>] [<var>target</var>] 135 1.1.1.14 mrg </pre></div> 136 1.1 mrg 137 1.1.1.14 mrg <a name="Distributor-options"></a> 138 1.1.1.14 mrg <h3 class="heading">Distributor options</h3> 139 1.1 mrg 140 1.1 mrg <p>If you will be distributing binary versions of GCC, with modifications 141 1.1 mrg to the source code, you should use the options described in this 142 1.1 mrg section to make clear that your version contains modifications. 143 1.1.1.14 mrg </p> 144 1.1.1.14 mrg <dl compact="compact"> 145 1.1.1.14 mrg <dt><code>--with-pkgversion=<var>version</var></code></dt> 146 1.1.1.14 mrg <dd><p>Specify a string that identifies your package. You may wish 147 1.1 mrg to include a build number or build date. This version string will be 148 1.1.1.14 mrg included in the output of <code>gcc --version</code>. This suffix does 149 1.1.1.14 mrg not replace the default version string, only the ‘<samp>GCC</samp>’ part. 150 1.1.1.14 mrg </p> 151 1.1.1.14 mrg <p>The default value is ‘<samp>GCC</samp>’. 152 1.1.1.14 mrg </p> 153 1.1.1.14 mrg </dd> 154 1.1.1.14 mrg <dt><code>--with-bugurl=<var>url</var></code></dt> 155 1.1.1.14 mrg <dd><p>Specify the URL that users should visit if they wish to report a bug. 156 1.1 mrg You are of course welcome to forward bugs reported to you to the FSF, 157 1.1 mrg if you determine that they are not bugs in your modifications. 158 1.1.1.14 mrg </p> 159 1.1.1.14 mrg <p>The default value refers to the FSF’s GCC bug tracker. 160 1.1.1.14 mrg </p> 161 1.1.1.14 mrg </dd> 162 1.1.1.14 mrg </dl> 163 1.1 mrg 164 1.1.1.14 mrg <a name="Target-specification"></a> 165 1.1.1.14 mrg <h3 class="heading">Target specification</h3> 166 1.1.1.14 mrg <ul> 167 1.1.1.14 mrg <li> GCC has code to correctly determine the correct value for <var>target</var> 168 1.1 mrg for nearly all native systems. Therefore, we highly recommend you do 169 1.1 mrg not provide a configure target when configuring a native compiler. 170 1.1 mrg 171 1.1.1.14 mrg </li><li> <var>target</var> must be specified as <samp>--target=<var>target</var></samp> 172 1.1 mrg when configuring a cross compiler; examples of valid targets would be 173 1.1 mrg m68k-elf, sh-elf, etc. 174 1.1 mrg 175 1.1.1.14 mrg </li><li> Specifying just <var>target</var> instead of <samp>--target=<var>target</var></samp> 176 1.1.1.14 mrg implies that the host defaults to <var>target</var>. 177 1.1.1.14 mrg </li></ul> 178 1.1.1.11 mrg 179 1.1.1.14 mrg 180 1.1.1.14 mrg <a name="Options-specification"></a> 181 1.1.1.14 mrg <h3 class="heading">Options specification</h3> 182 1.1 mrg 183 1.1 mrg <p>Use <var>options</var> to override several configure time options for 184 1.1.1.14 mrg GCC. A list of supported <var>options</var> follows; ‘<samp>configure 185 1.1.1.14 mrg --help</samp>’ may list other options, but those not listed below may not 186 1.1 mrg work and should not normally be used. 187 1.1.1.14 mrg </p> 188 1.1.1.14 mrg <p>Note that each <samp>--enable</samp> option has a corresponding 189 1.1.1.14 mrg <samp>--disable</samp> option and that each <samp>--with</samp> option has a 190 1.1.1.14 mrg corresponding <samp>--without</samp> option. 191 1.1.1.14 mrg </p> 192 1.1.1.14 mrg <dl compact="compact"> 193 1.1.1.14 mrg <dt><code>--prefix=<var>dirname</var></code></dt> 194 1.1.1.14 mrg <dd><p>Specify the toplevel installation 195 1.1 mrg directory. This is the recommended way to install the tools into a directory 196 1.1 mrg other than the default. The toplevel installation directory defaults to 197 1.1.1.14 mrg <samp>/usr/local</samp>. 198 1.1.1.14 mrg </p> 199 1.1.1.14 mrg <p>We <strong>highly</strong> recommend against <var>dirname</var> being the same or a 200 1.1 mrg subdirectory of <var>objdir</var> or vice versa. If specifying a directory 201 1.1.1.14 mrg beneath a user’s home directory tree, some shells will not expand 202 1.1.1.14 mrg <var>dirname</var> correctly if it contains the ‘<samp>~</samp>’ metacharacter; use 203 1.1.1.14 mrg <code>$HOME</code> instead. 204 1.1.1.14 mrg </p> 205 1.1.1.14 mrg <p>The following standard <code>autoconf</code> options are supported. Normally you 206 1.1 mrg should not need to use these options. 207 1.1.1.14 mrg </p><dl compact="compact"> 208 1.1.1.14 mrg <dt><code>--exec-prefix=<var>dirname</var></code></dt> 209 1.1.1.14 mrg <dd><p>Specify the toplevel installation directory for architecture-dependent 210 1.1 mrg files. The default is <samp><var>prefix</var></samp>. 211 1.1.1.14 mrg </p> 212 1.1.1.14 mrg </dd> 213 1.1.1.14 mrg <dt><code>--bindir=<var>dirname</var></code></dt> 214 1.1.1.14 mrg <dd><p>Specify the installation directory for the executables called by users 215 1.1.1.14 mrg (such as <code>gcc</code> and <code>g++</code>). The default is 216 1.1.1.14 mrg <samp><var>exec-prefix</var>/bin</samp>. 217 1.1.1.14 mrg </p> 218 1.1.1.14 mrg </dd> 219 1.1.1.14 mrg <dt><code>--libdir=<var>dirname</var></code></dt> 220 1.1.1.14 mrg <dd><p>Specify the installation directory for object code libraries and 221 1.1.1.14 mrg internal data files of GCC. The default is <samp><var>exec-prefix</var>/lib</samp>. 222 1.1.1.14 mrg </p> 223 1.1.1.14 mrg </dd> 224 1.1.1.14 mrg <dt><code>--libexecdir=<var>dirname</var></code></dt> 225 1.1.1.14 mrg <dd><p>Specify the installation directory for internal executables of GCC. 226 1.1.1.14 mrg The default is <samp><var>exec-prefix</var>/libexec</samp>. 227 1.1.1.14 mrg </p> 228 1.1.1.14 mrg </dd> 229 1.1.1.14 mrg <dt><code>--with-slibdir=<var>dirname</var></code></dt> 230 1.1.1.14 mrg <dd><p>Specify the installation directory for the shared libgcc library. The 231 1.1 mrg default is <samp><var>libdir</var></samp>. 232 1.1.1.14 mrg </p> 233 1.1.1.14 mrg </dd> 234 1.1.1.14 mrg <dt><code>--datarootdir=<var>dirname</var></code></dt> 235 1.1.1.14 mrg <dd><p>Specify the root of the directory tree for read-only architecture-independent 236 1.1.1.14 mrg data files referenced by GCC. The default is <samp><var>prefix</var>/share</samp>. 237 1.1.1.14 mrg </p> 238 1.1.1.14 mrg </dd> 239 1.1.1.14 mrg <dt><code>--infodir=<var>dirname</var></code></dt> 240 1.1.1.14 mrg <dd><p>Specify the installation directory for documentation in info format. 241 1.1.1.14 mrg The default is <samp><var>datarootdir</var>/info</samp>. 242 1.1.1.14 mrg </p> 243 1.1.1.14 mrg </dd> 244 1.1.1.14 mrg <dt><code>--datadir=<var>dirname</var></code></dt> 245 1.1.1.14 mrg <dd><p>Specify the installation directory for some architecture-independent 246 1.1 mrg data files referenced by GCC. The default is <samp><var>datarootdir</var></samp>. 247 1.1.1.14 mrg </p> 248 1.1.1.14 mrg </dd> 249 1.1.1.14 mrg <dt><code>--docdir=<var>dirname</var></code></dt> 250 1.1.1.14 mrg <dd><p>Specify the installation directory for documentation files (other 251 1.1.1.14 mrg than Info) for GCC. The default is <samp><var>datarootdir</var>/doc</samp>. 252 1.1.1.14 mrg </p> 253 1.1.1.14 mrg </dd> 254 1.1.1.14 mrg <dt><code>--htmldir=<var>dirname</var></code></dt> 255 1.1.1.14 mrg <dd><p>Specify the installation directory for HTML documentation files. 256 1.1 mrg The default is <samp><var>docdir</var></samp>. 257 1.1.1.14 mrg </p> 258 1.1.1.14 mrg </dd> 259 1.1.1.14 mrg <dt><code>--pdfdir=<var>dirname</var></code></dt> 260 1.1.1.14 mrg <dd><p>Specify the installation directory for PDF documentation files. 261 1.1 mrg The default is <samp><var>docdir</var></samp>. 262 1.1.1.14 mrg </p> 263 1.1.1.14 mrg </dd> 264 1.1.1.14 mrg <dt><code>--mandir=<var>dirname</var></code></dt> 265 1.1.1.14 mrg <dd><p>Specify the installation directory for manual pages. The default is 266 1.1.1.14 mrg <samp><var>datarootdir</var>/man</samp>. (Note that the manual pages are only extracts 267 1.1 mrg from the full GCC manuals, which are provided in Texinfo format. The manpages 268 1.1 mrg are derived by an automatic conversion process from parts of the full 269 1.1 mrg manual.) 270 1.1.1.14 mrg </p> 271 1.1.1.14 mrg </dd> 272 1.1.1.14 mrg <dt><code>--with-gxx-include-dir=<var>dirname</var></code></dt> 273 1.1.1.14 mrg <dd><p>Specify 274 1.1 mrg the installation directory for G++ header files. The default depends 275 1.1 mrg on other configuration options, and differs between cross and native 276 1.1 mrg configurations. 277 1.1.1.14 mrg </p> 278 1.1.1.14 mrg </dd> 279 1.1.1.14 mrg <dt><code>--with-specs=<var>specs</var></code></dt> 280 1.1.1.14 mrg <dd><p>Specify additional command line driver SPECS. 281 1.1.1.3 skrll This can be useful if you need to turn on a non-standard feature by 282 1.1.1.14 mrg default without modifying the compiler’s source code, for instance 283 1.1.1.14 mrg <samp>--with-specs=%{!fcommon:%{!fno-common:-fno-common}}</samp>. 284 1.1.1.3 skrll See “Spec Files” in the main manual 285 1.1.1.14 mrg </p> 286 1.1.1.14 mrg </dd> 287 1.1.1.14 mrg </dl> 288 1.1.1.3 skrll 289 1.1.1.14 mrg </dd> 290 1.1.1.14 mrg <dt><code>--program-prefix=<var>prefix</var></code></dt> 291 1.1.1.14 mrg <dd><p>GCC supports some transformations of the names of its programs when 292 1.1 mrg installing them. This option prepends <var>prefix</var> to the names of 293 1.1 mrg programs to install in <var>bindir</var> (see above). For example, specifying 294 1.1.1.14 mrg <samp>--program-prefix=foo-</samp> would result in ‘<samp>gcc</samp>’ 295 1.1.1.14 mrg being installed as <samp>/usr/local/bin/foo-gcc</samp>. 296 1.1.1.14 mrg </p> 297 1.1.1.14 mrg </dd> 298 1.1.1.14 mrg <dt><code>--program-suffix=<var>suffix</var></code></dt> 299 1.1.1.14 mrg <dd><p>Appends <var>suffix</var> to the names of programs to install in <var>bindir</var> 300 1.1.1.14 mrg (see above). For example, specifying <samp>--program-suffix=-3.1</samp> 301 1.1.1.14 mrg would result in ‘<samp>gcc</samp>’ being installed as 302 1.1.1.14 mrg <samp>/usr/local/bin/gcc-3.1</samp>. 303 1.1.1.14 mrg </p> 304 1.1.1.14 mrg </dd> 305 1.1.1.14 mrg <dt><code>--program-transform-name=<var>pattern</var></code></dt> 306 1.1.1.14 mrg <dd><p>Applies the ‘<samp>sed</samp>’ script <var>pattern</var> to be applied to the names 307 1.1 mrg of programs to install in <var>bindir</var> (see above). <var>pattern</var> has to 308 1.1.1.14 mrg consist of one or more basic ‘<samp>sed</samp>’ editing commands, separated by 309 1.1.1.14 mrg semicolons. For example, if you want the ‘<samp>gcc</samp>’ program name to be 310 1.1.1.14 mrg transformed to the installed program <samp>/usr/local/bin/myowngcc</samp> and 311 1.1.1.14 mrg the ‘<samp>g++</samp>’ program name to be transformed to 312 1.1.1.14 mrg <samp>/usr/local/bin/gspecial++</samp> without changing other program names, 313 1.1 mrg you could use the pattern 314 1.1.1.14 mrg <samp>--program-transform-name='s/^gcc$/myowngcc/; s/^g++$/gspecial++/'</samp> 315 1.1 mrg to achieve this effect. 316 1.1.1.14 mrg </p> 317 1.1.1.14 mrg <p>All three options can be combined and used together, resulting in more 318 1.1 mrg complex conversion patterns. As a basic rule, <var>prefix</var> (and 319 1.1 mrg <var>suffix</var>) are prepended (appended) before further transformations 320 1.1 mrg can happen with a special transformation script <var>pattern</var>. 321 1.1.1.14 mrg </p> 322 1.1.1.14 mrg <p>As currently implemented, this option only takes effect for native 323 1.1.1.14 mrg builds; cross compiler binaries’ names are not transformed even when a 324 1.1 mrg transformation is explicitly asked for by one of these options. 325 1.1.1.14 mrg </p> 326 1.1.1.14 mrg <p>For native builds, some of the installed programs are also installed 327 1.1 mrg with the target alias in front of their name, as in 328 1.1.1.14 mrg ‘<samp>i686-pc-linux-gnu-gcc</samp>’. All of the above transformations happen 329 1.1 mrg before the target alias is prepended to the name—so, specifying 330 1.1.1.14 mrg <samp>--program-prefix=foo-</samp> and <samp>program-suffix=-3.1</samp>, the 331 1.1 mrg resulting binary would be installed as 332 1.1.1.14 mrg <samp>/usr/local/bin/i686-pc-linux-gnu-foo-gcc-3.1</samp>. 333 1.1.1.14 mrg </p> 334 1.1.1.14 mrg <p>As a last shortcoming, none of the installed Ada programs are 335 1.1 mrg transformed yet, which will be fixed in some time. 336 1.1.1.14 mrg </p> 337 1.1.1.14 mrg </dd> 338 1.1.1.14 mrg <dt><code>--with-local-prefix=<var>dirname</var></code></dt> 339 1.1.1.14 mrg <dd><p>Specify the 340 1.1 mrg installation directory for local include files. The default is 341 1.1.1.14 mrg <samp>/usr/local</samp>. Specify this option if you want the compiler to 342 1.1.1.14 mrg search directory <samp><var>dirname</var>/include</samp> for locally installed 343 1.1.1.14 mrg header files <em>instead</em> of <samp>/usr/local/include</samp>. 344 1.1.1.14 mrg </p> 345 1.1.1.14 mrg <p>You should specify <samp>--with-local-prefix</samp> <strong>only</strong> if your 346 1.1.1.14 mrg site has a different convention (not <samp>/usr/local</samp>) for where to put 347 1.1 mrg site-specific files. 348 1.1.1.14 mrg </p> 349 1.1.1.14 mrg <p>The default value for <samp>--with-local-prefix</samp> is <samp>/usr/local</samp> 350 1.1.1.14 mrg regardless of the value of <samp>--prefix</samp>. Specifying 351 1.1.1.14 mrg <samp>--prefix</samp> has no effect on which directory GCC searches for 352 1.1 mrg local header files. This may seem counterintuitive, but actually it is 353 1.1 mrg logical. 354 1.1.1.14 mrg </p> 355 1.1.1.14 mrg <p>The purpose of <samp>--prefix</samp> is to specify where to <em>install 356 1.1.1.14 mrg GCC</em>. The local header files in <samp>/usr/local/include</samp>—if you put 357 1.1 mrg any in that directory—are not part of GCC. They are part of other 358 1.1 mrg programs—perhaps many others. (GCC installs its own header files in 359 1.1.1.14 mrg another directory which is based on the <samp>--prefix</samp> value.) 360 1.1.1.14 mrg </p> 361 1.1.1.14 mrg <p>Both the local-prefix include directory and the GCC-prefix include 362 1.1.1.14 mrg directory are part of GCC’s “system include” directories. Although these 363 1.1 mrg two directories are not fixed, they need to be searched in the proper 364 1.1 mrg order for the correct processing of the include_next directive. The 365 1.1 mrg local-prefix include directory is searched before the GCC-prefix 366 1.1 mrg include directory. Another characteristic of system include directories 367 1.1 mrg is that pedantic warnings are turned off for headers in these directories. 368 1.1.1.14 mrg </p> 369 1.1.1.14 mrg <p>Some autoconf macros add <samp>-I <var>directory</var></samp> options to the 370 1.1 mrg compiler command line, to ensure that directories containing installed 371 1.1.1.14 mrg packages’ headers are searched. When <var>directory</var> is one of GCC’s 372 1.1 mrg system include directories, GCC will ignore the option so that system 373 1.1 mrg directories continue to be processed in the correct order. This 374 1.1 mrg may result in a search order different from what was specified but the 375 1.1 mrg directory will still be searched. 376 1.1.1.14 mrg </p> 377 1.1.1.14 mrg <p>GCC automatically searches for ordinary libraries using 378 1.1.1.14 mrg <code>GCC_EXEC_PREFIX</code>. Thus, when the same installation prefix is 379 1.1 mrg used for both GCC and packages, GCC will automatically search for 380 1.1 mrg both headers and libraries. This provides a configuration that is 381 1.1 mrg easy to use. GCC behaves in a manner similar to that when it is 382 1.1.1.14 mrg installed as a system compiler in <samp>/usr</samp>. 383 1.1.1.14 mrg </p> 384 1.1.1.14 mrg <p>Sites that need to install multiple versions of GCC may not want to 385 1.1 mrg use the above simple configuration. It is possible to use the 386 1.1.1.14 mrg <samp>--program-prefix</samp>, <samp>--program-suffix</samp> and 387 1.1.1.14 mrg <samp>--program-transform-name</samp> options to install multiple versions 388 1.1 mrg into a single directory, but it may be simpler to use different prefixes 389 1.1.1.14 mrg and the <samp>--with-local-prefix</samp> option to specify the location of the 390 1.1 mrg site-specific files for each version. It will then be necessary for 391 1.1 mrg users to specify explicitly the location of local site libraries 392 1.1.1.14 mrg (e.g., with <code>LIBRARY_PATH</code>). 393 1.1.1.14 mrg </p> 394 1.1.1.14 mrg <p>The same value can be used for both <samp>--with-local-prefix</samp> and 395 1.1.1.14 mrg <samp>--prefix</samp> provided it is not <samp>/usr</samp>. This can be used 396 1.1.1.14 mrg to avoid the default search of <samp>/usr/local/include</samp>. 397 1.1.1.14 mrg </p> 398 1.1.1.14 mrg <p><strong>Do not</strong> specify <samp>/usr</samp> as the <samp>--with-local-prefix</samp>! 399 1.1.1.14 mrg The directory you use for <samp>--with-local-prefix</samp> <strong>must not</strong> 400 1.1.1.14 mrg contain any of the system’s standard header files. If it did contain 401 1.1 mrg them, certain programs would be miscompiled (including GNU Emacs, on 402 1.1 mrg certain targets), because this would override and nullify the header 403 1.1.1.14 mrg file corrections made by the <code>fixincludes</code> script. 404 1.1.1.14 mrg </p> 405 1.1.1.14 mrg <p>Indications are that people who use this option use it based on mistaken 406 1.1 mrg ideas of what it is for. People use it as if it specified where to 407 1.1 mrg install part of GCC. Perhaps they make this assumption because 408 1.1 mrg installing GCC creates the directory. 409 1.1.1.14 mrg </p> 410 1.1.1.14 mrg </dd> 411 1.1.1.14 mrg <dt><code>--with-gcc-major-version-only</code></dt> 412 1.1.1.14 mrg <dd><p>Specifies that GCC should use only the major number rather than 413 1.1.1.10 mrg <var>major</var>.<var>minor</var>.<var>patchlevel</var> in filesystem paths. 414 1.1.1.14 mrg </p> 415 1.1.1.14 mrg </dd> 416 1.1.1.14 mrg <dt><code>--with-native-system-header-dir=<var>dirname</var></code></dt> 417 1.1.1.14 mrg <dd><p>Specifies that <var>dirname</var> is the directory that contains native system 418 1.1.1.14 mrg header files, rather than <samp>/usr/include</samp>. This option is most useful 419 1.1.1.3 skrll if you are creating a compiler that should be isolated from the system 420 1.1.1.3 skrll as much as possible. It is most commonly used with the 421 1.1.1.14 mrg <samp>--with-sysroot</samp> option and will cause GCC to search 422 1.1.1.3 skrll <var>dirname</var> inside the system root specified by that option. 423 1.1.1.14 mrg </p> 424 1.1.1.14 mrg </dd> 425 1.1.1.14 mrg <dt><code>--enable-shared[=<var>package</var>[,…]]</code></dt> 426 1.1.1.14 mrg <dd><p>Build shared versions of libraries, if shared libraries are supported on 427 1.1 mrg the target platform. Unlike GCC 2.95.x and earlier, shared libraries 428 1.1 mrg are enabled by default on all platforms that support shared libraries. 429 1.1.1.14 mrg </p> 430 1.1.1.14 mrg <p>If a list of packages is given as an argument, build shared libraries 431 1.1 mrg only for the listed packages. For other packages, only static libraries 432 1.1 mrg will be built. Package names currently recognized in the GCC tree are 433 1.1.1.14 mrg ‘<samp>libgcc</samp>’ (also known as ‘<samp>gcc</samp>’), ‘<samp>libstdc++</samp>’ (not 434 1.1.1.14 mrg ‘<samp>libstdc++-v3</samp>’), ‘<samp>libffi</samp>’, ‘<samp>zlib</samp>’, ‘<samp>boehm-gc</samp>’, 435 1.1.1.15 mrg ‘<samp>ada</samp>’, ‘<samp>libada</samp>’, ‘<samp>libgo</samp>’, ‘<samp>libobjc</samp>’, and ‘<samp>libphobos</samp>’. 436 1.1.1.14 mrg Note ‘<samp>libiberty</samp>’ does not support shared libraries at all. 437 1.1.1.14 mrg </p> 438 1.1.1.14 mrg <p>Use <samp>--disable-shared</samp> to build only static libraries. Note that 439 1.1.1.14 mrg <samp>--disable-shared</samp> does not accept a list of package names as 440 1.1.1.14 mrg argument, only <samp>--enable-shared</samp> does. 441 1.1.1.14 mrg </p> 442 1.1.1.14 mrg <p>Contrast with <samp>--enable-host-shared</samp>, which affects <em>host</em> 443 1.1.1.6 mrg code. 444 1.1.1.14 mrg </p> 445 1.1.1.14 mrg </dd> 446 1.1.1.14 mrg <dt><code>--enable-host-shared</code></dt> 447 1.1.1.14 mrg <dd><p>Specify that the <em>host</em> code should be built into position-independent 448 1.1.1.6 mrg machine code (with -fPIC), allowing it to be used within shared libraries, 449 1.1.1.6 mrg but yielding a slightly slower compiler. 450 1.1.1.14 mrg </p> 451 1.1.1.14 mrg <p>This option is required when building the libgccjit.so library. 452 1.1.1.14 mrg </p> 453 1.1.1.14 mrg <p>Contrast with <samp>--enable-shared</samp>, which affects <em>target</em> 454 1.1.1.6 mrg libraries. 455 1.1.1.14 mrg </p> 456 1.1.1.14 mrg </dd> 457 1.1.1.14 mrg <dt><code><a name="with-gnu-as"></a>--with-gnu-as</code></dt> 458 1.1.1.14 mrg <dd><p>Specify that the compiler should assume that the 459 1.1 mrg assembler it finds is the GNU assembler. However, this does not modify 460 1.1 mrg the rules to find an assembler and will result in confusion if the 461 1.1 mrg assembler found is not actually the GNU assembler. (Confusion may also 462 1.1 mrg result if the compiler finds the GNU assembler but has not been 463 1.1.1.14 mrg configured with <samp>--with-gnu-as</samp>.) If you have more than one 464 1.1 mrg assembler installed on your system, you may want to use this option in 465 1.1.1.14 mrg connection with <samp>--with-as=<var>pathname</var></samp> or 466 1.1.1.14 mrg <samp>--with-build-time-tools=<var>pathname</var></samp>. 467 1.1.1.14 mrg </p> 468 1.1.1.14 mrg <p>The following systems are the only ones where it makes a difference 469 1.1 mrg whether you use the GNU assembler. On any other system, 470 1.1.1.14 mrg <samp>--with-gnu-as</samp> has no effect. 471 1.1.1.14 mrg </p> 472 1.1.1.14 mrg <ul> 473 1.1.1.14 mrg <li> ‘<samp>hppa1.0-<var>any</var>-<var>any</var></samp>’ 474 1.1.1.14 mrg </li><li> ‘<samp>hppa1.1-<var>any</var>-<var>any</var></samp>’ 475 1.1.1.14 mrg </li><li> ‘<samp>sparc-sun-solaris2.<var>any</var></samp>’ 476 1.1.1.14 mrg </li><li> ‘<samp>sparc64-<var>any</var>-solaris2.<var>any</var></samp>’ 477 1.1.1.14 mrg </li></ul> 478 1.1.1.14 mrg 479 1.1.1.14 mrg </dd> 480 1.1.1.14 mrg <dt><code><a name="with-as"></a>--with-as=<var>pathname</var></code></dt> 481 1.1.1.14 mrg <dd><p>Specify that the compiler should use the assembler pointed to by 482 1.1 mrg <var>pathname</var>, rather than the one found by the standard rules to find 483 1.1 mrg an assembler, which are: 484 1.1.1.14 mrg </p><ul> 485 1.1.1.14 mrg <li> Unless GCC is being built with a cross compiler, check the 486 1.1.1.14 mrg <samp><var>libexec</var>/gcc/<var>target</var>/<var>version</var></samp> directory. 487 1.1.1.14 mrg <var>libexec</var> defaults to <samp><var>exec-prefix</var>/libexec</samp>; 488 1.1 mrg <var>exec-prefix</var> defaults to <var>prefix</var>, which 489 1.1.1.14 mrg defaults to <samp>/usr/local</samp> unless overridden by the 490 1.1.1.14 mrg <samp>--prefix=<var>pathname</var></samp> switch described above. <var>target</var> 491 1.1.1.14 mrg is the target system triple, such as ‘<samp>sparc-sun-solaris2.7</samp>’, and 492 1.1 mrg <var>version</var> denotes the GCC version, such as 3.0. 493 1.1 mrg 494 1.1.1.14 mrg </li><li> If the target system is the same that you are building on, check 495 1.1.1.14 mrg operating system specific directories (e.g. <samp>/usr/ccs/bin</samp> on 496 1.1 mrg Sun Solaris 2). 497 1.1 mrg 498 1.1.1.14 mrg </li><li> Check in the <code>PATH</code> for a tool whose name is prefixed by the 499 1.1 mrg target system triple. 500 1.1 mrg 501 1.1.1.14 mrg </li><li> Check in the <code>PATH</code> for a tool whose name is not prefixed by the 502 1.1 mrg target system triple, if the host and target system triple are 503 1.1 mrg the same (in other words, we use a host tool if it can be used for 504 1.1.1.14 mrg the target as well). 505 1.1.1.14 mrg </li></ul> 506 1.1 mrg 507 1.1.1.14 mrg <p>You may want to use <samp>--with-as</samp> if no assembler 508 1.1 mrg is installed in the directories listed above, or if you have multiple 509 1.1 mrg assemblers installed and want to choose one that is not found by the 510 1.1 mrg above rules. 511 1.1.1.14 mrg </p> 512 1.1.1.14 mrg </dd> 513 1.1.1.14 mrg <dt><code><a name="with-gnu-ld"></a>--with-gnu-ld</code></dt> 514 1.1.1.14 mrg <dd><p>Same as <a href="#with-gnu-as"><samp>--with-gnu-as</samp></a> 515 1.1 mrg but for the linker. 516 1.1.1.14 mrg </p> 517 1.1.1.14 mrg </dd> 518 1.1.1.14 mrg <dt><code>--with-ld=<var>pathname</var></code></dt> 519 1.1.1.14 mrg <dd><p>Same as <a href="#with-as"><samp>--with-as</samp></a> 520 1.1 mrg but for the linker. 521 1.1.1.14 mrg </p> 522 1.1.1.14 mrg </dd> 523 1.1.1.14 mrg <dt><code>--with-stabs</code></dt> 524 1.1.1.14 mrg <dd><p>Specify that stabs debugging 525 1.1 mrg information should be used instead of whatever format the host normally 526 1.1 mrg uses. Normally GCC uses the same debug format as the host system. 527 1.1.1.14 mrg </p> 528 1.1.1.14 mrg </dd> 529 1.1.1.14 mrg <dt><code>--with-tls=<var>dialect</var></code></dt> 530 1.1.1.14 mrg <dd><p>Specify the default TLS dialect, for systems were there is a choice. 531 1.1.1.3 skrll For ARM targets, possible values for <var>dialect</var> are <code>gnu</code> or 532 1.1.1.3 skrll <code>gnu2</code>, which select between the original GNU dialect and the GNU TLS 533 1.1.1.3 skrll descriptor-based dialect. 534 1.1.1.14 mrg </p> 535 1.1.1.14 mrg </dd> 536 1.1.1.14 mrg <dt><code>--enable-multiarch</code></dt> 537 1.1.1.14 mrg <dd><p>Specify whether to enable or disable multiarch support. The default is 538 1.1.1.3 skrll to check for glibc start files in a multiarch location, and enable it 539 1.1.1.3 skrll if the files are found. The auto detection is enabled for native builds, 540 1.1.1.14 mrg and for cross builds configured with <samp>--with-sysroot</samp>, and without 541 1.1.1.14 mrg <samp>--with-native-system-header-dir</samp>. 542 1.1.1.3 skrll More documentation about multiarch can be found at 543 1.1.1.8 mrg <a href="https://wiki.debian.org/Multiarch">https://wiki.debian.org/Multiarch</a>. 544 1.1.1.14 mrg </p> 545 1.1.1.14 mrg </dd> 546 1.1.1.14 mrg <dt><code>--enable-sjlj-exceptions</code></dt> 547 1.1.1.14 mrg <dd><p>Force use of the <code>setjmp</code>/<code>longjmp</code>-based scheme for exceptions. 548 1.1.1.14 mrg ‘<samp>configure</samp>’ ordinarily picks the correct value based on the platform. 549 1.1.1.7 mrg Only use this option if you are sure you need a different setting. 550 1.1.1.14 mrg </p> 551 1.1.1.14 mrg </dd> 552 1.1.1.14 mrg <dt><code>--enable-vtable-verify</code></dt> 553 1.1.1.14 mrg <dd><p>Specify whether to enable or disable the vtable verification feature. 554 1.1.1.6 mrg Enabling this feature causes libstdc++ to be built with its virtual calls 555 1.1.1.6 mrg in verifiable mode. This means that, when linked with libvtv, every 556 1.1.1.6 mrg virtual call in libstdc++ will verify the vtable pointer through which the 557 1.1.1.6 mrg call will be made before actually making the call. If not linked with libvtv, 558 1.1.1.14 mrg the verifier will call stub functions (in libstdc++ itself) and do nothing. 559 1.1.1.6 mrg If vtable verification is disabled, then libstdc++ is not built with its 560 1.1.1.6 mrg virtual calls in verifiable mode at all. However the libvtv library will 561 1.1.1.14 mrg still be built (see <samp>--disable-libvtv</samp> to turn off building libvtv). 562 1.1.1.14 mrg <samp>--disable-vtable-verify</samp> is the default. 563 1.1.1.14 mrg </p> 564 1.1.1.14 mrg </dd> 565 1.1.1.15 mrg <dt><code>--disable-gcov</code></dt> 566 1.1.1.15 mrg <dd><p>Specify that the run-time library used for coverage analysis 567 1.1.1.15 mrg and associated host tools should not be built. 568 1.1.1.15 mrg </p> 569 1.1.1.15 mrg </dd> 570 1.1.1.14 mrg <dt><code>--disable-multilib</code></dt> 571 1.1.1.14 mrg <dd><p>Specify that multiple target 572 1.1 mrg libraries to support different target variants, calling 573 1.1 mrg conventions, etc. should not be built. The default is to build a 574 1.1 mrg predefined set of them. 575 1.1.1.14 mrg </p> 576 1.1.1.14 mrg <p>Some targets provide finer-grained control over which multilibs are built 577 1.1.1.14 mrg (e.g., <samp>--disable-softfloat</samp>): 578 1.1.1.14 mrg </p><dl compact="compact"> 579 1.1.1.14 mrg <dt><code>arm-*-*</code></dt> 580 1.1.1.14 mrg <dd><p>fpu, 26bit, underscore, interwork, biendian, nofmult. 581 1.1.1.14 mrg </p> 582 1.1.1.14 mrg </dd> 583 1.1.1.14 mrg <dt><code>m68*-*-*</code></dt> 584 1.1.1.14 mrg <dd><p>softfloat, m68881, m68000, m68020. 585 1.1.1.14 mrg </p> 586 1.1.1.14 mrg </dd> 587 1.1.1.14 mrg <dt><code>mips*-*-*</code></dt> 588 1.1.1.14 mrg <dd><p>single-float, biendian, softfloat. 589 1.1.1.14 mrg </p> 590 1.1.1.14 mrg </dd> 591 1.1.1.14 mrg <dt><code>powerpc*-*-*, rs6000*-*-*</code></dt> 592 1.1.1.14 mrg <dd><p>aix64, pthread, softfloat, powercpu, powerpccpu, powerpcos, biendian, 593 1.1 mrg sysv, aix. 594 1.1.1.14 mrg </p> 595 1.1.1.14 mrg </dd> 596 1.1.1.14 mrg </dl> 597 1.1 mrg 598 1.1.1.14 mrg </dd> 599 1.1.1.14 mrg <dt><code>--with-multilib-list=<var>list</var></code></dt> 600 1.1.1.14 mrg <dt><code>--without-multilib-list</code></dt> 601 1.1.1.14 mrg <dd><p>Specify what multilibs to build. <var>list</var> is a comma separated list of 602 1.1.1.10 mrg values, possibly consisting of a single value. Currently only implemented 603 1.1.1.15 mrg for aarch64*-*-*, arm*-*-*, riscv*-*-*, sh*-*-* and x86-64-*-linux*. The 604 1.1.1.15 mrg accepted values and meaning for each target is given below. 605 1.1.1.14 mrg </p> 606 1.1.1.14 mrg <dl compact="compact"> 607 1.1.1.14 mrg <dt><code>aarch64*-*-*</code></dt> 608 1.1.1.14 mrg <dd><p><var>list</var> is a comma separated list of <code>ilp32</code>, and <code>lp64</code> 609 1.1.1.14 mrg to enable ILP32 and LP64 run-time libraries, respectively. If 610 1.1.1.14 mrg <var>list</var> is empty, then there will be no multilibs and only the 611 1.1.1.14 mrg default run-time library will be built. If <var>list</var> is 612 1.1.1.14 mrg <code>default</code> or –with-multilib-list= is not specified, then the 613 1.1.1.14 mrg default set of libraries is selected based on the value of 614 1.1.1.14 mrg <samp>--target</samp>. 615 1.1.1.14 mrg </p> 616 1.1.1.14 mrg </dd> 617 1.1.1.14 mrg <dt><code>arm*-*-*</code></dt> 618 1.1.1.15 mrg <dd><p><var>list</var> is a comma separated list of <code>aprofile</code> and 619 1.1.1.15 mrg <code>rmprofile</code> to build multilibs for A or R and M architecture 620 1.1.1.15 mrg profiles respectively. Note that, due to some limitation of the current 621 1.1.1.15 mrg multilib framework, using the combined <code>aprofile,rmprofile</code> 622 1.1.1.15 mrg multilibs selects in some cases a less optimal multilib than when using 623 1.1.1.15 mrg the multilib profile for the architecture targetted. The special value 624 1.1.1.15 mrg <code>default</code> is also accepted and is equivalent to omitting the 625 1.1.1.15 mrg option, i.e., only the default run-time library will be enabled. 626 1.1.1.15 mrg </p> 627 1.1.1.15 mrg <p><var>list</var> may instead contain <code>@name</code>, to use the multilib 628 1.1.1.15 mrg configuration Makefile fragment <samp>name</samp> in <samp>gcc/config/arm</samp> in 629 1.1.1.15 mrg the source tree (it is part of the corresponding sources, after all). 630 1.1.1.15 mrg It is recommended, but not required, that files used for this purpose to 631 1.1.1.15 mrg be named starting with <samp>t-ml-</samp>, to make their intended purpose 632 1.1.1.15 mrg self-evident, in line with GCC conventions. Such files enable custom, 633 1.1.1.15 mrg user-chosen multilib lists to be configured. Whether multiple such 634 1.1.1.15 mrg files can be used together depends on the contents of the supplied 635 1.1.1.15 mrg files. See <samp>gcc/config/arm/t-multilib</samp> and its supplementary 636 1.1.1.15 mrg <samp>gcc/config/arm/t-*profile</samp> files for an example of what such 637 1.1.1.15 mrg Makefile fragments might look like for this version of GCC. The macros 638 1.1.1.15 mrg expected to be defined in these fragments are not stable across GCC 639 1.1.1.15 mrg releases, so make sure they define the <code>MULTILIB</code>-related macros 640 1.1.1.15 mrg expected by the version of GCC you are building. 641 1.1.1.15 mrg See “Target Makefile Fragments” in the internals manual. 642 1.1.1.14 mrg </p> 643 1.1.1.14 mrg <p>The table below gives the combination of ISAs, architectures, FPUs and 644 1.1.1.15 mrg floating-point ABIs for which multilibs are built for each predefined 645 1.1.1.15 mrg profile. The union of these options is considered when specifying both 646 1.1.1.15 mrg <code>aprofile</code> and <code>rmprofile</code>. 647 1.1.1.14 mrg </p> 648 1.1.1.14 mrg <table> 649 1.1.1.14 mrg <tr><td width="15%">Option</td><td width="28%">aprofile</td><td width="30%">rmprofile</td></tr> 650 1.1.1.14 mrg <tr><td width="15%">ISAs</td><td width="28%"><code>-marm</code> and <code>-mthumb</code></td><td width="30%"><code>-mthumb</code></td></tr> 651 1.1.1.14 mrg <tr><td width="15%">Architectures<br><br><br><br><br><br></td><td width="28%">default architecture<br> 652 1.1.1.10 mrg <code>-march=armv7-a</code><br> 653 1.1.1.10 mrg <code>-march=armv7ve</code><br> 654 1.1.1.14 mrg <code>-march=armv8-a</code><br><br><br></td><td width="30%">default architecture<br> 655 1.1.1.10 mrg <code>-march=armv6s-m</code><br> 656 1.1.1.10 mrg <code>-march=armv7-m</code><br> 657 1.1.1.10 mrg <code>-march=armv7e-m</code><br> 658 1.1.1.10 mrg <code>-march=armv8-m.base</code><br> 659 1.1.1.10 mrg <code>-march=armv8-m.main</code><br> 660 1.1.1.14 mrg <code>-march=armv7</code></td></tr> 661 1.1.1.14 mrg <tr><td width="15%">FPUs<br><br><br><br><br></td><td width="28%">none<br> 662 1.1.1.10 mrg <code>-mfpu=vfpv3-d16</code><br> 663 1.1.1.10 mrg <code>-mfpu=neon</code><br> 664 1.1.1.10 mrg <code>-mfpu=vfpv4-d16</code><br> 665 1.1.1.10 mrg <code>-mfpu=neon-vfpv4</code><br> 666 1.1.1.14 mrg <code>-mfpu=neon-fp-armv8</code></td><td width="30%">none<br> 667 1.1.1.10 mrg <code>-mfpu=vfpv3-d16</code><br> 668 1.1.1.10 mrg <code>-mfpu=fpv4-sp-d16</code><br> 669 1.1.1.10 mrg <code>-mfpu=fpv5-sp-d16</code><br> 670 1.1.1.14 mrg <code>-mfpu=fpv5-d16</code><br></td></tr> 671 1.1.1.14 mrg <tr><td width="15%">floating-point ABIs<br><br></td><td width="28%"><code>-mfloat-abi=soft</code><br> 672 1.1.1.10 mrg <code>-mfloat-abi=softfp</code><br> 673 1.1.1.14 mrg <code>-mfloat-abi=hard</code></td><td width="30%"><code>-mfloat-abi=soft</code><br> 674 1.1.1.10 mrg <code>-mfloat-abi=softfp</code><br> 675 1.1.1.14 mrg <code>-mfloat-abi=hard</code></td></tr> 676 1.1.1.14 mrg </table> 677 1.1.1.10 mrg 678 1.1.1.14 mrg </dd> 679 1.1.1.15 mrg <dt><code>riscv*-*-*</code></dt> 680 1.1.1.15 mrg <dd><p><var>list</var> is a single ABI name. The target architecture must be either 681 1.1.1.15 mrg <code>rv32gc</code> or <code>rv64gc</code>. This will build a single multilib for the 682 1.1.1.15 mrg specified architecture and ABI pair. If <code>--with-multilib-list</code> is not 683 1.1.1.15 mrg given, then a default set of multilibs is selected based on the value of 684 1.1.1.15 mrg <samp>--target</samp>. This is usually a large set of multilibs. 685 1.1.1.15 mrg </p> 686 1.1.1.15 mrg </dd> 687 1.1.1.14 mrg <dt><code>sh*-*-*</code></dt> 688 1.1.1.14 mrg <dd><p><var>list</var> is a comma separated list of CPU names. These must be of the 689 1.1 mrg form <code>sh*</code> or <code>m*</code> (in which case they match the compiler option 690 1.1 mrg for that processor). The list should not contain any endian options - 691 1.1.1.14 mrg these are handled by <samp>--with-endian</samp>. 692 1.1.1.14 mrg </p> 693 1.1.1.14 mrg <p>If <var>list</var> is empty, then there will be no multilibs for extra 694 1.1 mrg processors. The multilib for the secondary endian remains enabled. 695 1.1.1.14 mrg </p> 696 1.1.1.14 mrg <p>As a special case, if an entry in the list starts with a <code>!</code> 697 1.1.1.14 mrg (exclamation point), then it is added to the list of excluded multilibs. 698 1.1.1.14 mrg Entries of this sort should be compatible with ‘<samp>MULTILIB_EXCLUDES</samp>’ 699 1.1 mrg (once the leading <code>!</code> has been stripped). 700 1.1.1.14 mrg </p> 701 1.1.1.14 mrg <p>If <samp>--with-multilib-list</samp> is not given, then a default set of 702 1.1.1.14 mrg multilibs is selected based on the value of <samp>--target</samp>. This is 703 1.1 mrg usually the complete set of libraries, but some targets imply a more 704 1.1 mrg specialized subset. 705 1.1.1.14 mrg </p> 706 1.1.1.14 mrg <p>Example 1: to configure a compiler for SH4A only, but supporting both 707 1.1.1.13 mrg endians, with little endian being the default: 708 1.1.1.14 mrg </p><div class="smallexample"> 709 1.1.1.14 mrg <pre class="smallexample">--with-cpu=sh4a --with-endian=little,big --with-multilib-list= 710 1.1.1.14 mrg </pre></div> 711 1.1.1.14 mrg 712 1.1.1.14 mrg <p>Example 2: to configure a compiler for both SH4A and SH4AL-DSP, but with 713 1.1 mrg only little endian SH4AL: 714 1.1.1.14 mrg </p><div class="smallexample"> 715 1.1.1.14 mrg <pre class="smallexample">--with-cpu=sh4a --with-endian=little,big \ 716 1.1.1.14 mrg --with-multilib-list=sh4al,!mb/m4al 717 1.1.1.14 mrg </pre></div> 718 1.1.1.14 mrg 719 1.1.1.14 mrg </dd> 720 1.1.1.14 mrg <dt><code>x86-64-*-linux*</code></dt> 721 1.1.1.14 mrg <dd><p><var>list</var> is a comma separated list of <code>m32</code>, <code>m64</code> and 722 1.1.1.3 skrll <code>mx32</code> to enable 32-bit, 64-bit and x32 run-time libraries, 723 1.1.1.3 skrll respectively. If <var>list</var> is empty, then there will be no multilibs 724 1.1.1.3 skrll and only the default run-time library will be enabled. 725 1.1.1.14 mrg </p> 726 1.1.1.14 mrg <p>If <samp>--with-multilib-list</samp> is not given, then only 32-bit and 727 1.1.1.14 mrg 64-bit run-time libraries will be enabled. 728 1.1.1.14 mrg </p></dd> 729 1.1.1.3 skrll </dl> 730 1.1.1.3 skrll 731 1.1.1.14 mrg </dd> 732 1.1.1.14 mrg <dt><code>--with-endian=<var>endians</var></code></dt> 733 1.1.1.14 mrg <dd><p>Specify what endians to use. 734 1.1 mrg Currently only implemented for sh*-*-*. 735 1.1.1.14 mrg </p> 736 1.1.1.14 mrg <p><var>endians</var> may be one of the following: 737 1.1.1.14 mrg </p><dl compact="compact"> 738 1.1.1.14 mrg <dt><code>big</code></dt> 739 1.1.1.14 mrg <dd><p>Use big endian exclusively. 740 1.1.1.14 mrg </p></dd> 741 1.1.1.14 mrg <dt><code>little</code></dt> 742 1.1.1.14 mrg <dd><p>Use little endian exclusively. 743 1.1.1.14 mrg </p></dd> 744 1.1.1.14 mrg <dt><code>big,little</code></dt> 745 1.1.1.14 mrg <dd><p>Use big endian by default. Provide a multilib for little endian. 746 1.1.1.14 mrg </p></dd> 747 1.1.1.14 mrg <dt><code>little,big</code></dt> 748 1.1.1.14 mrg <dd><p>Use little endian by default. Provide a multilib for big endian. 749 1.1.1.14 mrg </p></dd> 750 1.1 mrg </dl> 751 1.1 mrg 752 1.1.1.14 mrg </dd> 753 1.1.1.14 mrg <dt><code>--enable-threads</code></dt> 754 1.1.1.14 mrg <dd><p>Specify that the target 755 1.1 mrg supports threads. This affects the Objective-C compiler and runtime 756 1.1.1.14 mrg library, and exception handling for other languages like C++. 757 1.1 mrg On some systems, this is the default. 758 1.1.1.14 mrg </p> 759 1.1.1.14 mrg <p>In general, the best (and, in many cases, the only known) threading 760 1.1 mrg model available will be configured for use. Beware that on some 761 1.1 mrg systems, GCC has not been taught what threading models are generally 762 1.1.1.14 mrg available for the system. In this case, <samp>--enable-threads</samp> is an 763 1.1.1.14 mrg alias for <samp>--enable-threads=single</samp>. 764 1.1.1.14 mrg </p> 765 1.1.1.14 mrg </dd> 766 1.1.1.14 mrg <dt><code>--disable-threads</code></dt> 767 1.1.1.14 mrg <dd><p>Specify that threading support should be disabled for the system. 768 1.1.1.14 mrg This is an alias for <samp>--enable-threads=single</samp>. 769 1.1.1.14 mrg </p> 770 1.1.1.14 mrg </dd> 771 1.1.1.14 mrg <dt><code>--enable-threads=<var>lib</var></code></dt> 772 1.1.1.14 mrg <dd><p>Specify that 773 1.1 mrg <var>lib</var> is the thread support library. This affects the Objective-C 774 1.1 mrg compiler and runtime library, and exception handling for other languages 775 1.1.1.10 mrg like C++. The possibilities for <var>lib</var> are: 776 1.1.1.14 mrg </p> 777 1.1.1.14 mrg <dl compact="compact"> 778 1.1.1.14 mrg <dt><code>aix</code></dt> 779 1.1.1.14 mrg <dd><p>AIX thread support. 780 1.1.1.14 mrg </p></dd> 781 1.1.1.14 mrg <dt><code>dce</code></dt> 782 1.1.1.14 mrg <dd><p>DCE thread support. 783 1.1.1.14 mrg </p></dd> 784 1.1.1.14 mrg <dt><code>lynx</code></dt> 785 1.1.1.14 mrg <dd><p>LynxOS thread support. 786 1.1.1.14 mrg </p></dd> 787 1.1.1.14 mrg <dt><code>mipssde</code></dt> 788 1.1.1.14 mrg <dd><p>MIPS SDE thread support. 789 1.1.1.14 mrg </p></dd> 790 1.1.1.14 mrg <dt><code>no</code></dt> 791 1.1.1.14 mrg <dd><p>This is an alias for ‘<samp>single</samp>’. 792 1.1.1.14 mrg </p></dd> 793 1.1.1.14 mrg <dt><code>posix</code></dt> 794 1.1.1.14 mrg <dd><p>Generic POSIX/Unix98 thread support. 795 1.1.1.14 mrg </p></dd> 796 1.1.1.14 mrg <dt><code>rtems</code></dt> 797 1.1.1.14 mrg <dd><p>RTEMS thread support. 798 1.1.1.14 mrg </p></dd> 799 1.1.1.14 mrg <dt><code>single</code></dt> 800 1.1.1.14 mrg <dd><p>Disable thread support, should work for all platforms. 801 1.1.1.14 mrg </p></dd> 802 1.1.1.14 mrg <dt><code>tpf</code></dt> 803 1.1.1.14 mrg <dd><p>TPF thread support. 804 1.1.1.14 mrg </p></dd> 805 1.1.1.14 mrg <dt><code>vxworks</code></dt> 806 1.1.1.14 mrg <dd><p>VxWorks thread support. 807 1.1.1.14 mrg </p></dd> 808 1.1.1.14 mrg <dt><code>win32</code></dt> 809 1.1.1.14 mrg <dd><p>Microsoft Win32 API thread support. 810 1.1.1.14 mrg </p></dd> 811 1.1 mrg </dl> 812 1.1 mrg 813 1.1.1.14 mrg </dd> 814 1.1.1.14 mrg <dt><code>--enable-tls</code></dt> 815 1.1.1.14 mrg <dd><p>Specify that the target supports TLS (Thread Local Storage). Usually 816 1.1 mrg configure can correctly determine if TLS is supported. In cases where 817 1.1 mrg it guesses incorrectly, TLS can be explicitly enabled or disabled with 818 1.1.1.14 mrg <samp>--enable-tls</samp> or <samp>--disable-tls</samp>. This can happen if 819 1.1 mrg the assembler supports TLS but the C library does not, or if the 820 1.1 mrg assumptions made by the configure test are incorrect. 821 1.1.1.14 mrg </p> 822 1.1.1.14 mrg </dd> 823 1.1.1.14 mrg <dt><code>--disable-tls</code></dt> 824 1.1.1.14 mrg <dd><p>Specify that the target does not support TLS. 825 1.1.1.14 mrg This is an alias for <samp>--enable-tls=no</samp>. 826 1.1.1.14 mrg </p> 827 1.1.1.14 mrg </dd> 828 1.1.1.14 mrg <dt><code>--with-cpu=<var>cpu</var></code></dt> 829 1.1.1.14 mrg <dt><code>--with-cpu-32=<var>cpu</var></code></dt> 830 1.1.1.14 mrg <dt><code>--with-cpu-64=<var>cpu</var></code></dt> 831 1.1.1.14 mrg <dd><p>Specify which cpu variant the compiler should generate code for by default. 832 1.1.1.14 mrg <var>cpu</var> will be used as the default value of the <samp>-mcpu=</samp> switch. 833 1.1.1.6 mrg This option is only supported on some targets, including ARC, ARM, i386, M68k, 834 1.1.1.14 mrg PowerPC, and SPARC. It is mandatory for ARC. The <samp>--with-cpu-32</samp> and 835 1.1.1.14 mrg <samp>--with-cpu-64</samp> options specify separate default CPUs for 836 1.1 mrg 32-bit and 64-bit modes; these options are only supported for i386, 837 1.1.1.8 mrg x86-64, PowerPC, and SPARC. 838 1.1.1.14 mrg </p> 839 1.1.1.14 mrg </dd> 840 1.1.1.14 mrg <dt><code>--with-schedule=<var>cpu</var></code></dt> 841 1.1.1.14 mrg <dt><code>--with-arch=<var>cpu</var></code></dt> 842 1.1.1.14 mrg <dt><code>--with-arch-32=<var>cpu</var></code></dt> 843 1.1.1.14 mrg <dt><code>--with-arch-64=<var>cpu</var></code></dt> 844 1.1.1.14 mrg <dt><code>--with-tune=<var>cpu</var></code></dt> 845 1.1.1.14 mrg <dt><code>--with-tune-32=<var>cpu</var></code></dt> 846 1.1.1.14 mrg <dt><code>--with-tune-64=<var>cpu</var></code></dt> 847 1.1.1.14 mrg <dt><code>--with-abi=<var>abi</var></code></dt> 848 1.1.1.14 mrg <dt><code>--with-fpu=<var>type</var></code></dt> 849 1.1.1.14 mrg <dt><code>--with-float=<var>type</var></code></dt> 850 1.1.1.14 mrg <dd><p>These configure options provide default values for the <samp>-mschedule=</samp>, 851 1.1.1.14 mrg <samp>-march=</samp>, <samp>-mtune=</samp>, <samp>-mabi=</samp>, and <samp>-mfpu=</samp> 852 1.1.1.14 mrg options and for <samp>-mhard-float</samp> or <samp>-msoft-float</samp>. As with 853 1.1.1.14 mrg <samp>--with-cpu</samp>, which switches will be accepted and acceptable values 854 1.1 mrg of the arguments depend on the target. 855 1.1.1.14 mrg </p> 856 1.1.1.14 mrg </dd> 857 1.1.1.14 mrg <dt><code>--with-mode=<var>mode</var></code></dt> 858 1.1.1.14 mrg <dd><p>Specify if the compiler should default to <samp>-marm</samp> or <samp>-mthumb</samp>. 859 1.1 mrg This option is only supported on ARM targets. 860 1.1.1.14 mrg </p> 861 1.1.1.14 mrg </dd> 862 1.1.1.14 mrg <dt><code>--with-stack-offset=<var>num</var></code></dt> 863 1.1.1.14 mrg <dd><p>This option sets the default for the -mstack-offset=<var>num</var> option, 864 1.1.1.3 skrll and will thus generally also control the setting of this option for 865 1.1.1.3 skrll libraries. This option is only supported on Epiphany targets. 866 1.1.1.14 mrg </p> 867 1.1.1.14 mrg </dd> 868 1.1.1.14 mrg <dt><code>--with-fpmath=<var>isa</var></code></dt> 869 1.1.1.14 mrg <dd><p>This options sets <samp>-mfpmath=sse</samp> by default and specifies the default 870 1.1.1.14 mrg ISA for floating-point arithmetics. You can select either ‘<samp>sse</samp>’ which 871 1.1.1.14 mrg enables <samp>-msse2</samp> or ‘<samp>avx</samp>’ which enables <samp>-mavx</samp> by default. 872 1.1.1.3 skrll This option is only supported on i386 and x86-64 targets. 873 1.1.1.14 mrg </p> 874 1.1.1.14 mrg </dd> 875 1.1.1.14 mrg <dt><code>--with-fp-32=<var>mode</var></code></dt> 876 1.1.1.14 mrg <dd><p>On MIPS targets, set the default value for the <samp>-mfp</samp> option when using 877 1.1.1.6 mrg the o32 ABI. The possibilities for <var>mode</var> are: 878 1.1.1.14 mrg </p><dl compact="compact"> 879 1.1.1.14 mrg <dt><code>32</code></dt> 880 1.1.1.14 mrg <dd><p>Use the o32 FP32 ABI extension, as with the <samp>-mfp32</samp> command-line 881 1.1.1.14 mrg option. 882 1.1.1.14 mrg </p></dd> 883 1.1.1.14 mrg <dt><code>xx</code></dt> 884 1.1.1.14 mrg <dd><p>Use the o32 FPXX ABI extension, as with the <samp>-mfpxx</samp> command-line 885 1.1.1.14 mrg option. 886 1.1.1.14 mrg </p></dd> 887 1.1.1.14 mrg <dt><code>64</code></dt> 888 1.1.1.14 mrg <dd><p>Use the o32 FP64 ABI extension, as with the <samp>-mfp64</samp> command-line 889 1.1.1.14 mrg option. 890 1.1.1.14 mrg </p></dd> 891 1.1.1.6 mrg </dl> 892 1.1.1.14 mrg <p>In the absence of this configuration option the default is to use the o32 893 1.1.1.6 mrg FP32 ABI extension. 894 1.1.1.14 mrg </p> 895 1.1.1.14 mrg </dd> 896 1.1.1.14 mrg <dt><code>--with-odd-spreg-32</code></dt> 897 1.1.1.14 mrg <dd><p>On MIPS targets, set the <samp>-modd-spreg</samp> option by default when using 898 1.1.1.6 mrg the o32 ABI. 899 1.1.1.14 mrg </p> 900 1.1.1.14 mrg </dd> 901 1.1.1.14 mrg <dt><code>--without-odd-spreg-32</code></dt> 902 1.1.1.14 mrg <dd><p>On MIPS targets, set the <samp>-mno-odd-spreg</samp> option by default when using 903 1.1.1.6 mrg the o32 ABI. This is normally used in conjunction with 904 1.1.1.14 mrg <samp>--with-fp-32=64</samp> in order to target the o32 FP64A ABI extension. 905 1.1.1.14 mrg </p> 906 1.1.1.14 mrg </dd> 907 1.1.1.14 mrg <dt><code>--with-nan=<var>encoding</var></code></dt> 908 1.1.1.14 mrg <dd><p>On MIPS targets, set the default encoding convention to use for the 909 1.1.1.6 mrg special not-a-number (NaN) IEEE 754 floating-point data. The 910 1.1.1.6 mrg possibilities for <var>encoding</var> are: 911 1.1.1.14 mrg </p><dl compact="compact"> 912 1.1.1.14 mrg <dt><code>legacy</code></dt> 913 1.1.1.14 mrg <dd><p>Use the legacy encoding, as with the <samp>-mnan=legacy</samp> command-line 914 1.1.1.14 mrg option. 915 1.1.1.14 mrg </p></dd> 916 1.1.1.14 mrg <dt><code>2008</code></dt> 917 1.1.1.14 mrg <dd><p>Use the 754-2008 encoding, as with the <samp>-mnan=2008</samp> command-line 918 1.1.1.14 mrg option. 919 1.1.1.14 mrg </p></dd> 920 1.1.1.6 mrg </dl> 921 1.1.1.14 mrg <p>To use this configuration option you must have an assembler version 922 1.1.1.14 mrg installed that supports the <samp>-mnan=</samp> command-line option too. 923 1.1.1.6 mrg In the absence of this configuration option the default convention is 924 1.1.1.14 mrg the legacy encoding, as when neither of the <samp>-mnan=2008</samp> and 925 1.1.1.14 mrg <samp>-mnan=legacy</samp> command-line options has been used. 926 1.1.1.14 mrg </p> 927 1.1.1.14 mrg </dd> 928 1.1.1.14 mrg <dt><code>--with-divide=<var>type</var></code></dt> 929 1.1.1.14 mrg <dd><p>Specify how the compiler should generate code for checking for 930 1.1.1.14 mrg division by zero. This option is only supported on the MIPS target. 931 1.1 mrg The possibilities for <var>type</var> are: 932 1.1.1.14 mrg </p><dl compact="compact"> 933 1.1.1.14 mrg <dt><code>traps</code></dt> 934 1.1.1.14 mrg <dd><p>Division by zero checks use conditional traps (this is the default on 935 1.1.1.14 mrg systems that support conditional traps). 936 1.1.1.14 mrg </p></dd> 937 1.1.1.14 mrg <dt><code>breaks</code></dt> 938 1.1.1.14 mrg <dd><p>Division by zero checks use the break instruction. 939 1.1.1.14 mrg </p></dd> 940 1.1 mrg </dl> 941 1.1 mrg 942 1.1.1.14 mrg 943 1.1.1.14 mrg </dd> 944 1.1.1.14 mrg <dt><code>--with-llsc</code></dt> 945 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mllsc</samp> the default when no 946 1.1.1.14 mrg <samp>-mno-llsc</samp> option is passed. This is the default for 947 1.1 mrg Linux-based targets, as the kernel will emulate them if the ISA does 948 1.1 mrg not provide them. 949 1.1.1.14 mrg </p> 950 1.1.1.14 mrg </dd> 951 1.1.1.14 mrg <dt><code>--without-llsc</code></dt> 952 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mno-llsc</samp> the default when no 953 1.1.1.14 mrg <samp>-mllsc</samp> option is passed. 954 1.1.1.14 mrg </p> 955 1.1.1.14 mrg </dd> 956 1.1.1.14 mrg <dt><code>--with-synci</code></dt> 957 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-msynci</samp> the default when no 958 1.1.1.14 mrg <samp>-mno-synci</samp> option is passed. 959 1.1.1.14 mrg </p> 960 1.1.1.14 mrg </dd> 961 1.1.1.14 mrg <dt><code>--without-synci</code></dt> 962 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mno-synci</samp> the default when no 963 1.1.1.14 mrg <samp>-msynci</samp> option is passed. This is the default. 964 1.1.1.14 mrg </p> 965 1.1.1.14 mrg </dd> 966 1.1.1.14 mrg <dt><code>--with-lxc1-sxc1</code></dt> 967 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mlxc1-sxc1</samp> the default when no 968 1.1.1.14 mrg <samp>-mno-lxc1-sxc1</samp> option is passed. This is the default. 969 1.1.1.14 mrg </p> 970 1.1.1.14 mrg </dd> 971 1.1.1.14 mrg <dt><code>--without-lxc1-sxc1</code></dt> 972 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mno-lxc1-sxc1</samp> the default when no 973 1.1.1.14 mrg <samp>-mlxc1-sxc1</samp> option is passed. The indexed load/store 974 1.1.1.10 mrg instructions are not directly a problem but can lead to unexpected 975 1.1.1.10 mrg behaviour when deployed in an application intended for a 32-bit address 976 1.1.1.10 mrg space but run on a 64-bit processor. The issue is seen because all 977 1.1.1.10 mrg known MIPS 64-bit Linux kernels execute o32 and n32 applications 978 1.1.1.10 mrg with 64-bit addressing enabled which affects the overflow behaviour 979 1.1.1.10 mrg of the indexed addressing mode. GCC will assume that ordinary 980 1.1.1.10 mrg 32-bit arithmetic overflow behaviour is the same whether performed 981 1.1.1.10 mrg as an <code>addu</code> instruction or as part of the address calculation 982 1.1.1.10 mrg in <code>lwxc1</code> type instructions. This assumption holds true in a 983 1.1.1.10 mrg pure 32-bit environment and can hold true in a 64-bit environment if 984 1.1.1.10 mrg the address space is accurately set to be 32-bit for o32 and n32. 985 1.1.1.14 mrg </p> 986 1.1.1.14 mrg </dd> 987 1.1.1.14 mrg <dt><code>--with-madd4</code></dt> 988 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mmadd4</samp> the default when no 989 1.1.1.14 mrg <samp>-mno-madd4</samp> option is passed. This is the default. 990 1.1.1.14 mrg </p> 991 1.1.1.14 mrg </dd> 992 1.1.1.14 mrg <dt><code>--without-madd4</code></dt> 993 1.1.1.14 mrg <dd><p>On MIPS targets, make <samp>-mno-madd4</samp> the default when no 994 1.1.1.14 mrg <samp>-mmadd4</samp> option is passed. The <code>madd4</code> instruction 995 1.1.1.10 mrg family can be problematic when targeting a combination of cores that 996 1.1.1.10 mrg implement these instructions differently. There are two known cores 997 1.1.1.10 mrg that implement these as fused operations instead of unfused (where 998 1.1.1.10 mrg unfused is normally expected). Disabling these instructions is the 999 1.1.1.10 mrg only way to ensure compatible code is generated; this will incur 1000 1.1.1.10 mrg a performance penalty. 1001 1.1.1.14 mrg </p> 1002 1.1.1.14 mrg </dd> 1003 1.1.1.14 mrg <dt><code>--with-mips-plt</code></dt> 1004 1.1.1.14 mrg <dd><p>On MIPS targets, make use of copy relocations and PLTs. 1005 1.1 mrg These features are extensions to the traditional 1006 1.1 mrg SVR4-based MIPS ABIs and require support from GNU binutils 1007 1.1 mrg and the runtime C library. 1008 1.1.1.14 mrg </p> 1009 1.1.1.14 mrg </dd> 1010 1.1.1.15 mrg <dt><code>--with-stack-clash-protection-guard-size=<var>size</var></code></dt> 1011 1.1.1.15 mrg <dd><p>On certain targets this option sets the default stack clash protection guard 1012 1.1.1.15 mrg size as a power of two in bytes. On AArch64 <var>size</var> is required to be either 1013 1.1.1.15 mrg 12 (4KB) or 16 (64KB). 1014 1.1.1.15 mrg </p> 1015 1.1.1.15 mrg </dd> 1016 1.1.1.14 mrg <dt><code>--enable-__cxa_atexit</code></dt> 1017 1.1.1.14 mrg <dd><p>Define if you want to use __cxa_atexit, rather than atexit, to 1018 1.1.1.14 mrg register C++ destructors for local statics and global objects. 1019 1.1 mrg This is essential for fully standards-compliant handling of 1020 1.1 mrg destructors, but requires __cxa_atexit in libc. This option is currently 1021 1.1 mrg only available on systems with GNU libc. When enabled, this will cause 1022 1.1.1.14 mrg <samp>-fuse-cxa-atexit</samp> to be passed by default. 1023 1.1.1.14 mrg </p> 1024 1.1.1.14 mrg </dd> 1025 1.1.1.14 mrg <dt><code>--enable-gnu-indirect-function</code></dt> 1026 1.1.1.14 mrg <dd><p>Define if you want to enable the <code>ifunc</code> attribute. This option is 1027 1.1.1.3 skrll currently only available on systems with GNU libc on certain targets. 1028 1.1.1.14 mrg </p> 1029 1.1.1.14 mrg </dd> 1030 1.1.1.14 mrg <dt><code>--enable-target-optspace</code></dt> 1031 1.1.1.14 mrg <dd><p>Specify that target 1032 1.1.1.14 mrg libraries should be optimized for code space instead of code speed. 1033 1.1 mrg This is the default for the m32r platform. 1034 1.1.1.14 mrg </p> 1035 1.1.1.14 mrg </dd> 1036 1.1.1.14 mrg <dt><code>--with-cpp-install-dir=<var>dirname</var></code></dt> 1037 1.1.1.14 mrg <dd><p>Specify that the user visible <code>cpp</code> program should be installed 1038 1.1.1.14 mrg in <samp><var>prefix</var>/<var>dirname</var>/cpp</samp>, in addition to <var>bindir</var>. 1039 1.1.1.14 mrg </p> 1040 1.1.1.14 mrg </dd> 1041 1.1.1.14 mrg <dt><code>--enable-comdat</code></dt> 1042 1.1.1.14 mrg <dd><p>Enable COMDAT group support. This is primarily used to override the 1043 1.1 mrg automatically detected value. 1044 1.1.1.14 mrg </p> 1045 1.1.1.14 mrg </dd> 1046 1.1.1.14 mrg <dt><code>--enable-initfini-array</code></dt> 1047 1.1.1.14 mrg <dd><p>Force the use of sections <code>.init_array</code> and <code>.fini_array</code> 1048 1.1 mrg (instead of <code>.init</code> and <code>.fini</code>) for constructors and 1049 1.1.1.14 mrg destructors. Option <samp>--disable-initfini-array</samp> has the 1050 1.1 mrg opposite effect. If neither option is specified, the configure script 1051 1.1 mrg will try to guess whether the <code>.init_array</code> and 1052 1.1 mrg <code>.fini_array</code> sections are supported and, if they are, use them. 1053 1.1.1.14 mrg </p> 1054 1.1.1.14 mrg </dd> 1055 1.1.1.14 mrg <dt><code>--enable-link-mutex</code></dt> 1056 1.1.1.14 mrg <dd><p>When building GCC, use a mutex to avoid linking the compilers for 1057 1.1.1.6 mrg multiple languages at the same time, to avoid thrashing on build 1058 1.1.1.6 mrg systems with limited free memory. The default is not to use such a mutex. 1059 1.1.1.14 mrg </p> 1060 1.1.1.14 mrg </dd> 1061 1.1.1.14 mrg <dt><code>--enable-maintainer-mode</code></dt> 1062 1.1.1.14 mrg <dd><p>The build rules that regenerate the Autoconf and Automake output files as 1063 1.1.1.14 mrg well as the GCC master message catalog <samp>gcc.pot</samp> are normally 1064 1.1 mrg disabled. This is because it can only be rebuilt if the complete source 1065 1.1 mrg tree is present. If you have changed the sources and want to rebuild the 1066 1.1.1.14 mrg catalog, configuring with <samp>--enable-maintainer-mode</samp> will enable 1067 1.1 mrg this. Note that you need a recent version of the <code>gettext</code> tools 1068 1.1 mrg to do so. 1069 1.1.1.14 mrg </p> 1070 1.1.1.14 mrg </dd> 1071 1.1.1.14 mrg <dt><code>--disable-bootstrap</code></dt> 1072 1.1.1.14 mrg <dd><p>For a native build, the default configuration is to perform 1073 1.1.1.14 mrg a 3-stage bootstrap of the compiler when ‘<samp>make</samp>’ is invoked, 1074 1.1 mrg testing that GCC can compile itself correctly. If you want to disable 1075 1.1.1.14 mrg this process, you can configure with <samp>--disable-bootstrap</samp>. 1076 1.1.1.14 mrg </p> 1077 1.1.1.14 mrg </dd> 1078 1.1.1.14 mrg <dt><code>--enable-bootstrap</code></dt> 1079 1.1.1.14 mrg <dd><p>In special cases, you may want to perform a 3-stage build 1080 1.1.1.14 mrg even if the target and host triplets are different. 1081 1.1 mrg This is possible when the host can run code compiled for 1082 1.1.1.14 mrg the target (e.g. host is i686-linux, target is i486-linux). 1083 1.1 mrg Starting from GCC 4.2, to do this you have to configure explicitly 1084 1.1.1.14 mrg with <samp>--enable-bootstrap</samp>. 1085 1.1.1.14 mrg </p> 1086 1.1.1.14 mrg </dd> 1087 1.1.1.14 mrg <dt><code>--enable-generated-files-in-srcdir</code></dt> 1088 1.1.1.14 mrg <dd><p>Neither the .c and .h files that are generated from Bison and flex nor the 1089 1.1 mrg info manuals and man pages that are built from the .texi files are present 1090 1.1.1.14 mrg in the repository development tree. When building GCC from that development tree, 1091 1.1 mrg or from one of our snapshots, those generated files are placed in your 1092 1.1 mrg build directory, which allows for the source to be in a readonly 1093 1.1 mrg directory. 1094 1.1.1.14 mrg </p> 1095 1.1.1.14 mrg <p>If you configure with <samp>--enable-generated-files-in-srcdir</samp> then those 1096 1.1 mrg generated files will go into the source directory. This is mainly intended 1097 1.1 mrg for generating release or prerelease tarballs of the GCC sources, since it 1098 1.1 mrg is not a requirement that the users of source releases to have flex, Bison, 1099 1.1 mrg or makeinfo. 1100 1.1.1.14 mrg </p> 1101 1.1.1.14 mrg </dd> 1102 1.1.1.14 mrg <dt><code>--enable-version-specific-runtime-libs</code></dt> 1103 1.1.1.14 mrg <dd><p>Specify 1104 1.1 mrg that runtime libraries should be installed in the compiler specific 1105 1.1.1.14 mrg subdirectory (<samp><var>libdir</var>/gcc</samp>) rather than the usual places. In 1106 1.1.1.14 mrg addition, ‘<samp>libstdc++</samp>’’s include files will be installed into 1107 1.1 mrg <samp><var>libdir</var></samp> unless you overruled it by using 1108 1.1.1.14 mrg <samp>--with-gxx-include-dir=<var>dirname</var></samp>. Using this option is 1109 1.1 mrg particularly useful if you intend to use several versions of GCC in 1110 1.1.1.14 mrg parallel. This is currently supported by ‘<samp>libgfortran</samp>’, 1111 1.1.1.14 mrg ‘<samp>libstdc++</samp>’, and ‘<samp>libobjc</samp>’. 1112 1.1.1.14 mrg </p> 1113 1.1.1.14 mrg </dd> 1114 1.1.1.14 mrg <dt><code><a name="WithAixSoname"></a>--with-aix-soname=‘<samp>aix</samp>’, ‘<samp>svr4</samp>’ or ‘<samp>both</samp>’</code></dt> 1115 1.1.1.14 mrg <dd><p>Traditional AIX shared library versioning (versioned <code>Shared Object</code> 1116 1.1.1.6 mrg files as members of unversioned <code>Archive Library</code> files named 1117 1.1.1.14 mrg ‘<samp>lib.a</samp>’) causes numerous headaches for package managers. However, 1118 1.1.1.6 mrg <code>Import Files</code> as members of <code>Archive Library</code> files allow for 1119 1.1.1.6 mrg <strong>filename-based versioning</strong> of shared libraries as seen on Linux/SVR4, 1120 1.1.1.14 mrg where this is called the "SONAME". But as they prevent static linking, 1121 1.1.1.6 mrg <code>Import Files</code> may be used with <code>Runtime Linking</code> only, where the 1122 1.1.1.14 mrg linker does search for ‘<samp>libNAME.so</samp>’ before ‘<samp>libNAME.a</samp>’ library 1123 1.1.1.14 mrg filenames with the ‘<samp>-lNAME</samp>’ linker flag. 1124 1.1.1.14 mrg </p> 1125 1.1.1.14 mrg <a name="AixLdCommand"></a><p>For detailed information please refer to the AIX 1126 1.1.1.14 mrg <a href="https://www.ibm.com/support/knowledgecenter/search/%22the%20ld%20command%2C%20also%20called%20the%20linkage%20editor%20or%20binder%22">ld 1127 1.1.1.14 mrg Command</a> reference. 1128 1.1.1.14 mrg </p> 1129 1.1.1.14 mrg <p>As long as shared library creation is enabled, upon: 1130 1.1.1.14 mrg </p><dl compact="compact"> 1131 1.1.1.14 mrg <dt><code>--with-aix-soname=aix</code></dt> 1132 1.1.1.14 mrg <dt><code>--with-aix-soname=both</code></dt> 1133 1.1.1.14 mrg <dd><p>A (traditional AIX) <code>Shared Archive Library</code> file is created: 1134 1.1.1.14 mrg </p><ul> 1135 1.1.1.14 mrg <li> using the ‘<samp>libNAME.a</samp>’ filename scheme 1136 1.1.1.14 mrg </li><li> with the <code>Shared Object</code> file as archive member named 1137 1.1.1.14 mrg ‘<samp>libNAME.so.V</samp>’ (except for ‘<samp>libgcc_s</samp>’, where the <code>Shared 1138 1.1.1.14 mrg Object</code> file is named ‘<samp>shr.o</samp>’ for backwards compatibility), which 1139 1.1.1.14 mrg <ul class="no-bullet"> 1140 1.1.1.14 mrg <li>- is used for runtime loading from inside the ‘<samp>libNAME.a</samp>’ file 1141 1.1.1.14 mrg </li><li>- is used for dynamic loading via 1142 1.1.1.14 mrg <code>dlopen("libNAME.a(libNAME.so.V)", RTLD_MEMBER)</code> 1143 1.1.1.14 mrg </li><li>- is used for shared linking 1144 1.1.1.14 mrg </li><li>- is used for static linking, so no separate <code>Static Archive 1145 1.1.1.6 mrg Library</code> file is needed 1146 1.1.1.14 mrg </li></ul> 1147 1.1.1.14 mrg </li></ul> 1148 1.1.1.14 mrg </dd> 1149 1.1.1.14 mrg <dt><code>--with-aix-soname=both</code></dt> 1150 1.1.1.14 mrg <dt><code>--with-aix-soname=svr4</code></dt> 1151 1.1.1.14 mrg <dd><p>A (second) <code>Shared Archive Library</code> file is created: 1152 1.1.1.14 mrg </p><ul> 1153 1.1.1.14 mrg <li> using the ‘<samp>libNAME.so.V</samp>’ filename scheme 1154 1.1.1.14 mrg </li><li> with the <code>Shared Object</code> file as archive member named 1155 1.1.1.14 mrg ‘<samp>shr.o</samp>’, which 1156 1.1.1.14 mrg <ul class="no-bullet"> 1157 1.1.1.14 mrg <li>- is created with the <code>-G linker flag</code> 1158 1.1.1.14 mrg </li><li>- has the <code>F_LOADONLY</code> flag set 1159 1.1.1.14 mrg </li><li>- is used for runtime loading from inside the ‘<samp>libNAME.so.V</samp>’ file 1160 1.1.1.14 mrg </li><li>- is used for dynamic loading via <code>dlopen("libNAME.so.V(shr.o)", 1161 1.1.1.6 mrg RTLD_MEMBER)</code> 1162 1.1.1.14 mrg </li></ul> 1163 1.1.1.14 mrg </li><li> with the <code>Import File</code> as archive member named ‘<samp>shr.imp</samp>’, 1164 1.1.1.6 mrg which 1165 1.1.1.14 mrg <ul class="no-bullet"> 1166 1.1.1.14 mrg <li>- refers to ‘<samp>libNAME.so.V(shr.o)</samp>’ as the "SONAME", to be recorded 1167 1.1.1.6 mrg in the <code>Loader Section</code> of subsequent binaries 1168 1.1.1.14 mrg </li><li>- indicates whether ‘<samp>libNAME.so.V(shr.o)</samp>’ is 32 or 64 bit 1169 1.1.1.14 mrg </li><li>- lists all the public symbols exported by ‘<samp>lib.so.V(shr.o)</samp>’, 1170 1.1.1.14 mrg eventually decorated with the <code>‘<samp>weak</samp>’ Keyword</code> 1171 1.1.1.14 mrg </li><li>- is necessary for shared linking against ‘<samp>lib.so.V(shr.o)</samp>’ 1172 1.1.1.14 mrg </li></ul> 1173 1.1.1.14 mrg </li></ul> 1174 1.1.1.14 mrg <p>A symbolic link using the ‘<samp>libNAME.so</samp>’ filename scheme is created: 1175 1.1.1.14 mrg </p><ul> 1176 1.1.1.14 mrg <li> pointing to the ‘<samp>libNAME.so.V</samp>’ <code>Shared Archive Library</code> file 1177 1.1.1.14 mrg </li><li> to permit the <code>ld Command</code> to find ‘<samp>lib.so.V(shr.imp)</samp>’ via 1178 1.1.1.14 mrg the ‘<samp>-lNAME</samp>’ argument (requires <code>Runtime Linking</code> to be enabled) 1179 1.1.1.14 mrg </li><li> to permit dynamic loading of ‘<samp>lib.so.V(shr.o)</samp>’ without the need 1180 1.1.1.14 mrg to specify the version number via <code>dlopen("libNAME.so(shr.o)", 1181 1.1.1.6 mrg RTLD_MEMBER)</code> 1182 1.1.1.14 mrg </li></ul> 1183 1.1.1.14 mrg </dd> 1184 1.1.1.14 mrg </dl> 1185 1.1.1.6 mrg 1186 1.1.1.14 mrg <p>As long as static library creation is enabled, upon: 1187 1.1.1.14 mrg </p><dl compact="compact"> 1188 1.1.1.14 mrg <dt><code>--with-aix-soname=svr4</code></dt> 1189 1.1.1.14 mrg <dd><p>A <code>Static Archive Library</code> is created: 1190 1.1.1.14 mrg </p><ul> 1191 1.1.1.14 mrg <li> using the ‘<samp>libNAME.a</samp>’ filename scheme 1192 1.1.1.14 mrg </li><li> with all the <code>Static Object</code> files as archive members, which 1193 1.1.1.14 mrg <ul class="no-bullet"> 1194 1.1.1.14 mrg <li>- are used for static linking 1195 1.1.1.14 mrg </li></ul> 1196 1.1.1.14 mrg </li></ul> 1197 1.1.1.14 mrg </dd> 1198 1.1.1.14 mrg </dl> 1199 1.1.1.6 mrg 1200 1.1.1.14 mrg <p>While the aix-soname=‘<samp>svr4</samp>’ option does not create <code>Shared Object</code> 1201 1.1.1.6 mrg files as members of unversioned <code>Archive Library</code> files any more, package 1202 1.1.1.6 mrg managers still are responsible to 1203 1.1.1.6 mrg <a href="./specific.html#TransferAixShobj">transfer</a> <code>Shared Object</code> files 1204 1.1.1.6 mrg found as member of a previously installed unversioned <code>Archive Library</code> 1205 1.1.1.6 mrg file into the newly installed <code>Archive Library</code> file with the same 1206 1.1.1.6 mrg filename. 1207 1.1.1.14 mrg </p> 1208 1.1.1.14 mrg <p><em>WARNING:</em> Creating <code>Shared Object</code> files with <code>Runtime Linking</code> 1209 1.1.1.6 mrg enabled may bloat the TOC, eventually leading to <code>TOC overflow</code> errors, 1210 1.1.1.14 mrg requiring the use of either the <samp>-Wl,-bbigtoc</samp> linker flag (seen to 1211 1.1.1.6 mrg break with the <code>GDB</code> debugger) or some of the TOC-related compiler flags, 1212 1.1.1.6 mrg see “RS/6000 and PowerPC Options” in the main manual. 1213 1.1.1.14 mrg </p> 1214 1.1.1.14 mrg <p><samp>--with-aix-soname</samp> is currently supported by ‘<samp>libgcc_s</samp>’ only, so 1215 1.1.1.6 mrg this option is still experimental and not for normal use yet. 1216 1.1.1.14 mrg </p> 1217 1.1.1.14 mrg <p>Default is the traditional behavior <samp>--with-aix-soname=‘<samp>aix</samp>’</samp>. 1218 1.1.1.14 mrg </p> 1219 1.1.1.14 mrg </dd> 1220 1.1.1.14 mrg <dt><code>--enable-languages=<var>lang1</var>,<var>lang2</var>,…</code></dt> 1221 1.1.1.14 mrg <dd><p>Specify that only a particular subset of compilers and 1222 1.1 mrg their runtime libraries should be built. For a list of valid values for 1223 1.1 mrg <var>langN</var> you can issue the following command in the 1224 1.1.1.14 mrg <samp>gcc</samp> directory of your GCC source tree:<br> 1225 1.1.1.14 mrg </p><div class="smallexample"> 1226 1.1.1.14 mrg <pre class="smallexample">grep ^language= */config-lang.in 1227 1.1.1.14 mrg </pre></div> 1228 1.1.1.14 mrg <p>Currently, you can use any of the following: 1229 1.1.1.15 mrg <code>all</code>, <code>default</code>, <code>ada</code>, <code>c</code>, <code>c++</code>, <code>d</code>, 1230 1.1.1.15 mrg <code>fortran</code>, <code>go</code>, <code>jit</code>, <code>lto</code>, <code>objc</code>, <code>obj-c++</code>. 1231 1.1.1.14 mrg Building the Ada compiler has special requirements, see below. 1232 1.1.1.14 mrg If you do not pass this flag, or specify the option <code>default</code>, then the 1233 1.1.1.14 mrg default languages available in the <samp>gcc</samp> sub-tree will be configured. 1234 1.1.1.15 mrg Ada, D, Go, Jit, and Objective-C++ are not default languages. LTO is not a 1235 1.1.1.14 mrg default language, but is built by default because <samp>--enable-lto</samp> is 1236 1.1.1.14 mrg enabled by default. The other languages are default languages. If 1237 1.1.1.14 mrg <code>all</code> is specified, then all available languages are built. An 1238 1.1.1.14 mrg exception is <code>jit</code> language, which requires 1239 1.1.1.14 mrg <samp>--enable-host-shared</samp> to be included with <code>all</code>. 1240 1.1.1.14 mrg </p> 1241 1.1.1.14 mrg </dd> 1242 1.1.1.14 mrg <dt><code>--enable-stage1-languages=<var>lang1</var>,<var>lang2</var>,…</code></dt> 1243 1.1.1.14 mrg <dd><p>Specify that a particular subset of compilers and their runtime 1244 1.1 mrg libraries should be built with the system C compiler during stage 1 of 1245 1.1 mrg the bootstrap process, rather than only in later stages with the 1246 1.1 mrg bootstrapped C compiler. The list of valid values is the same as for 1247 1.1.1.14 mrg <samp>--enable-languages</samp>, and the option <code>all</code> will select all 1248 1.1.1.14 mrg of the languages enabled by <samp>--enable-languages</samp>. This option is 1249 1.1 mrg primarily useful for GCC development; for instance, when a development 1250 1.1 mrg version of the compiler cannot bootstrap due to compiler bugs, or when 1251 1.1 mrg one is debugging front ends other than the C front end. When this 1252 1.1 mrg option is used, one can then build the target libraries for the 1253 1.1.1.14 mrg specified languages with the stage-1 compiler by using <code>make 1254 1.1.1.14 mrg stage1-bubble all-target</code>, or run the testsuite on the stage-1 compiler 1255 1.1.1.14 mrg for the specified languages using <code>make stage1-start check-gcc</code>. 1256 1.1.1.14 mrg </p> 1257 1.1.1.14 mrg </dd> 1258 1.1.1.14 mrg <dt><code>--disable-libada</code></dt> 1259 1.1.1.14 mrg <dd><p>Specify that the run-time libraries and tools used by GNAT should not 1260 1.1 mrg be built. This can be useful for debugging, or for compatibility with 1261 1.1 mrg previous Ada build procedures, when it was required to explicitly 1262 1.1.1.14 mrg do a ‘<samp>make -C gcc gnatlib_and_tools</samp>’. 1263 1.1.1.14 mrg </p> 1264 1.1.1.14 mrg </dd> 1265 1.1.1.14 mrg <dt><code>--disable-libsanitizer</code></dt> 1266 1.1.1.14 mrg <dd><p>Specify that the run-time libraries for the various sanitizers should 1267 1.1.1.6 mrg not be built. 1268 1.1.1.14 mrg </p> 1269 1.1.1.14 mrg </dd> 1270 1.1.1.14 mrg <dt><code>--disable-libssp</code></dt> 1271 1.1.1.14 mrg <dd><p>Specify that the run-time libraries for stack smashing protection 1272 1.1.1.14 mrg should not be built or linked against. On many targets library support 1273 1.1.1.14 mrg is provided by the C library instead. 1274 1.1.1.14 mrg </p> 1275 1.1.1.14 mrg </dd> 1276 1.1.1.14 mrg <dt><code>--disable-libquadmath</code></dt> 1277 1.1.1.14 mrg <dd><p>Specify that the GCC quad-precision math library should not be built. 1278 1.1.1.3 skrll On some systems, the library is required to be linkable when building 1279 1.1.1.14 mrg the Fortran front end, unless <samp>--disable-libquadmath-support</samp> 1280 1.1.1.3 skrll is used. 1281 1.1.1.14 mrg </p> 1282 1.1.1.14 mrg </dd> 1283 1.1.1.14 mrg <dt><code>--disable-libquadmath-support</code></dt> 1284 1.1.1.14 mrg <dd><p>Specify that the Fortran front end and <code>libgfortran</code> do not add 1285 1.1.1.3 skrll support for <code>libquadmath</code> on systems supporting it. 1286 1.1.1.14 mrg </p> 1287 1.1.1.14 mrg </dd> 1288 1.1.1.14 mrg <dt><code>--disable-libgomp</code></dt> 1289 1.1.1.14 mrg <dd><p>Specify that the GNU Offloading and Multi Processing Runtime Library 1290 1.1.1.6 mrg should not be built. 1291 1.1.1.14 mrg </p> 1292 1.1.1.14 mrg </dd> 1293 1.1.1.14 mrg <dt><code>--disable-libvtv</code></dt> 1294 1.1.1.14 mrg <dd><p>Specify that the run-time libraries used by vtable verification 1295 1.1.1.6 mrg should not be built. 1296 1.1.1.14 mrg </p> 1297 1.1.1.14 mrg </dd> 1298 1.1.1.14 mrg <dt><code>--with-dwarf2</code></dt> 1299 1.1.1.14 mrg <dd><p>Specify that the compiler should 1300 1.1 mrg use DWARF 2 debugging information as the default. 1301 1.1.1.14 mrg </p> 1302 1.1.1.14 mrg </dd> 1303 1.1.1.14 mrg <dt><code>--with-advance-toolchain=<var>at</var></code></dt> 1304 1.1.1.14 mrg <dd><p>On 64-bit PowerPC Linux systems, configure the compiler to use the 1305 1.1.1.8 mrg header files, library files, and the dynamic linker from the Advance 1306 1.1.1.8 mrg Toolchain release <var>at</var> instead of the default versions that are 1307 1.1.1.8 mrg provided by the Linux distribution. In general, this option is 1308 1.1.1.8 mrg intended for the developers of GCC, and it is not intended for general 1309 1.1.1.8 mrg use. 1310 1.1.1.14 mrg </p> 1311 1.1.1.14 mrg </dd> 1312 1.1.1.14 mrg <dt><code>--enable-targets=all</code></dt> 1313 1.1.1.14 mrg <dt><code>--enable-targets=<var>target_list</var></code></dt> 1314 1.1.1.14 mrg <dd><p>Some GCC targets, e.g. powerpc64-linux, build bi-arch compilers. 1315 1.1 mrg These are compilers that are able to generate either 64-bit or 32-bit 1316 1.1.1.14 mrg code. Typically, the corresponding 32-bit target, e.g. 1317 1.1 mrg powerpc-linux for powerpc64-linux, only generates 32-bit code. This 1318 1.1 mrg option enables the 32-bit target to be a bi-arch compiler, which is 1319 1.1 mrg useful when you want a bi-arch compiler that defaults to 32-bit, and 1320 1.1.1.14 mrg you are building a bi-arch or multi-arch binutils in a combined tree. 1321 1.1 mrg On mips-linux, this will build a tri-arch compiler (ABI o32/n32/64), 1322 1.1.1.14 mrg defaulted to o32. 1323 1.1.1.3 skrll Currently, this option only affects sparc-linux, powerpc-linux, x86-linux, 1324 1.1.1.3 skrll mips-linux and s390-linux. 1325 1.1.1.14 mrg </p> 1326 1.1.1.14 mrg </dd> 1327 1.1.1.14 mrg <dt><code>--enable-default-pie</code></dt> 1328 1.1.1.14 mrg <dd><p>Turn on <samp>-fPIE</samp> and <samp>-pie</samp> by default. 1329 1.1.1.14 mrg </p> 1330 1.1.1.14 mrg </dd> 1331 1.1.1.14 mrg <dt><code>--enable-secureplt</code></dt> 1332 1.1.1.14 mrg <dd><p>This option enables <samp>-msecure-plt</samp> by default for powerpc-linux. 1333 1.1 mrg See “RS/6000 and PowerPC Options” in the main manual 1334 1.1.1.14 mrg </p> 1335 1.1.1.14 mrg </dd> 1336 1.1.1.14 mrg <dt><code>--enable-default-ssp</code></dt> 1337 1.1.1.14 mrg <dd><p>Turn on <samp>-fstack-protector-strong</samp> by default. 1338 1.1.1.14 mrg </p> 1339 1.1.1.14 mrg </dd> 1340 1.1.1.14 mrg <dt><code>--enable-cld</code></dt> 1341 1.1.1.14 mrg <dd><p>This option enables <samp>-mcld</samp> by default for 32-bit x86 targets. 1342 1.1 mrg See “i386 and x86-64 Options” in the main manual 1343 1.1.1.14 mrg </p> 1344 1.1.1.14 mrg </dd> 1345 1.1.1.15 mrg <dt><code>--enable-large-address-aware</code></dt> 1346 1.1.1.15 mrg <dd><p>The <samp>--enable-large-address-aware</samp> option arranges for MinGW 1347 1.1.1.15 mrg executables to be linked using the <samp>--large-address-aware</samp> 1348 1.1.1.15 mrg option, that enables the use of more than 2GB of memory. If GCC is 1349 1.1.1.15 mrg configured with this option, its effects can be reversed by passing the 1350 1.1.1.15 mrg <samp>-Wl,--disable-large-address-aware</samp> option to the so-configured 1351 1.1.1.15 mrg compiler driver. 1352 1.1.1.15 mrg </p> 1353 1.1.1.15 mrg </dd> 1354 1.1.1.14 mrg <dt><code>--enable-win32-registry</code></dt> 1355 1.1.1.14 mrg <dt><code>--enable-win32-registry=<var>key</var></code></dt> 1356 1.1.1.14 mrg <dt><code>--disable-win32-registry</code></dt> 1357 1.1.1.14 mrg <dd><p>The <samp>--enable-win32-registry</samp> option enables Microsoft Windows-hosted GCC 1358 1.1 mrg to look up installations paths in the registry using the following key: 1359 1.1.1.14 mrg </p> 1360 1.1.1.14 mrg <div class="smallexample"> 1361 1.1.1.14 mrg <pre class="smallexample"><code>HKEY_LOCAL_MACHINE\SOFTWARE\Free Software Foundation\<var>key</var></code> 1362 1.1.1.14 mrg </pre></div> 1363 1.1 mrg 1364 1.1.1.14 mrg <p><var>key</var> defaults to GCC version number, and can be overridden by the 1365 1.1.1.14 mrg <samp>--enable-win32-registry=<var>key</var></samp> option. Vendors and distributors 1366 1.1 mrg who use custom installers are encouraged to provide a different key, 1367 1.1 mrg perhaps one comprised of vendor name and GCC version number, to 1368 1.1 mrg avoid conflict with existing installations. This feature is enabled 1369 1.1.1.14 mrg by default, and can be disabled by <samp>--disable-win32-registry</samp> 1370 1.1 mrg option. This option has no effect on the other hosts. 1371 1.1.1.14 mrg </p> 1372 1.1.1.14 mrg </dd> 1373 1.1.1.14 mrg <dt><code>--nfp</code></dt> 1374 1.1.1.14 mrg <dd><p>Specify that the machine does not have a floating point unit. This 1375 1.1.1.14 mrg option only applies to ‘<samp>m68k-sun-sunos<var>n</var></samp>’. On any other 1376 1.1.1.14 mrg system, <samp>--nfp</samp> has no effect. 1377 1.1.1.14 mrg </p> 1378 1.1.1.14 mrg </dd> 1379 1.1.1.14 mrg <dt><code>--enable-werror</code></dt> 1380 1.1.1.14 mrg <dt><code>--disable-werror</code></dt> 1381 1.1.1.14 mrg <dt><code>--enable-werror=yes</code></dt> 1382 1.1.1.14 mrg <dt><code>--enable-werror=no</code></dt> 1383 1.1.1.14 mrg <dd><p>When you specify this option, it controls whether certain files in the 1384 1.1.1.14 mrg compiler are built with <samp>-Werror</samp> in bootstrap stage2 and later. 1385 1.1.1.14 mrg If you don’t specify it, <samp>-Werror</samp> is turned on for the main 1386 1.1 mrg development trunk. However it defaults to off for release branches and 1387 1.1.1.14 mrg final releases. The specific files which get <samp>-Werror</samp> are 1388 1.1 mrg controlled by the Makefiles. 1389 1.1.1.14 mrg </p> 1390 1.1.1.14 mrg </dd> 1391 1.1.1.14 mrg <dt><code>--enable-checking</code></dt> 1392 1.1.1.14 mrg <dt><code>--disable-checking</code></dt> 1393 1.1.1.14 mrg <dt><code>--enable-checking=<var>list</var></code></dt> 1394 1.1.1.14 mrg <dd><p>This option controls performing internal consistency checks in the compiler. 1395 1.1.1.14 mrg It does not change the generated code, but adds error checking of the 1396 1.1.1.14 mrg requested complexity. This slows down the compiler and may only work 1397 1.1.1.14 mrg properly if you are building the compiler with GCC. 1398 1.1.1.14 mrg </p> 1399 1.1.1.14 mrg <p>When the option is not specified, the active set of checks depends on context. 1400 1.1.1.14 mrg Namely, bootstrap stage 1 defaults to ‘<samp>--enable-checking=yes</samp>’, builds 1401 1.1.1.14 mrg from release branches or release archives default to 1402 1.1.1.14 mrg ‘<samp>--enable-checking=release</samp>’, and otherwise 1403 1.1.1.14 mrg ‘<samp>--enable-checking=yes,extra</samp>’ is used. When the option is 1404 1.1.1.14 mrg specified without a <var>list</var>, the result is the same as 1405 1.1.1.14 mrg ‘<samp>--enable-checking=yes</samp>’. Likewise, ‘<samp>--disable-checking</samp>’ is 1406 1.1.1.14 mrg equivalent to ‘<samp>--enable-checking=no</samp>’. 1407 1.1.1.14 mrg </p> 1408 1.1.1.14 mrg <p>The categories of checks available in <var>list</var> are ‘<samp>yes</samp>’ (most common 1409 1.1.1.14 mrg checks ‘<samp>assert,misc,gc,gimple,rtlflag,runtime,tree,types</samp>’), ‘<samp>no</samp>’ 1410 1.1.1.14 mrg (no checks at all), ‘<samp>all</samp>’ (all but ‘<samp>valgrind</samp>’), ‘<samp>release</samp>’ 1411 1.1.1.14 mrg (cheapest checks ‘<samp>assert,runtime</samp>’) or ‘<samp>none</samp>’ (same as ‘<samp>no</samp>’). 1412 1.1.1.14 mrg ‘<samp>release</samp>’ checks are always on and to disable them 1413 1.1.1.14 mrg ‘<samp>--disable-checking</samp>’ or ‘<samp>--enable-checking=no[,<other checks>]</samp>’ 1414 1.1.1.14 mrg must be explicitly requested. Disabling assertions makes the compiler and 1415 1.1.1.14 mrg runtime slightly faster but increases the risk of undetected internal errors 1416 1.1.1.14 mrg causing wrong code to be generated. 1417 1.1.1.14 mrg </p> 1418 1.1.1.14 mrg <p>Individual checks can be enabled with these flags: ‘<samp>assert</samp>’, ‘<samp>df</samp>’, 1419 1.1.1.14 mrg ‘<samp>extra</samp>’, ‘<samp>fold</samp>’, ‘<samp>gc</samp>’, ‘<samp>gcac</samp>’, ‘<samp>gimple</samp>’, 1420 1.1.1.14 mrg ‘<samp>misc</samp>’, ‘<samp>rtl</samp>’, ‘<samp>rtlflag</samp>’, ‘<samp>runtime</samp>’, ‘<samp>tree</samp>’, 1421 1.1.1.14 mrg ‘<samp>types</samp>’ and ‘<samp>valgrind</samp>’. ‘<samp>extra</samp>’ extends ‘<samp>misc</samp>’ 1422 1.1.1.14 mrg checking with extra checks that might affect code generation and should 1423 1.1.1.14 mrg therefore not differ between stage1 and later stages in bootstrap. 1424 1.1.1.14 mrg </p> 1425 1.1.1.14 mrg <p>The ‘<samp>valgrind</samp>’ check requires the external <code>valgrind</code> simulator, 1426 1.1.1.14 mrg available from <a href="http://valgrind.org/">http://valgrind.org/</a>. The ‘<samp>rtl</samp>’ checks are 1427 1.1.1.14 mrg expensive and the ‘<samp>df</samp>’, ‘<samp>gcac</samp>’ and ‘<samp>valgrind</samp>’ checks are very 1428 1.1.1.14 mrg expensive. 1429 1.1.1.14 mrg </p> 1430 1.1.1.14 mrg </dd> 1431 1.1.1.14 mrg <dt><code>--disable-stage1-checking</code></dt> 1432 1.1.1.14 mrg <dt><code>--enable-stage1-checking</code></dt> 1433 1.1.1.14 mrg <dt><code>--enable-stage1-checking=<var>list</var></code></dt> 1434 1.1.1.14 mrg <dd><p>This option affects only bootstrap build. If no <samp>--enable-checking</samp> 1435 1.1.1.14 mrg option is specified the stage1 compiler is built with ‘<samp>yes</samp>’ checking 1436 1.1.1.14 mrg enabled, otherwise the stage1 checking flags are the same as specified by 1437 1.1.1.14 mrg <samp>--enable-checking</samp>. To build the stage1 compiler with 1438 1.1.1.14 mrg different checking options use <samp>--enable-stage1-checking</samp>. 1439 1.1.1.14 mrg The list of checking options is the same as for <samp>--enable-checking</samp>. 1440 1.1 mrg If your system is too slow or too small to bootstrap a released compiler 1441 1.1.1.14 mrg with checking for stage1 enabled, you can use ‘<samp>--disable-stage1-checking</samp>’ 1442 1.1 mrg to disable checking for the stage1 compiler. 1443 1.1.1.14 mrg </p> 1444 1.1.1.14 mrg </dd> 1445 1.1.1.14 mrg <dt><code>--enable-coverage</code></dt> 1446 1.1.1.14 mrg <dt><code>--enable-coverage=<var>level</var></code></dt> 1447 1.1.1.14 mrg <dd><p>With this option, the compiler is built to collect self coverage 1448 1.1 mrg information, every time it is run. This is for internal development 1449 1.1 mrg purposes, and only works when the compiler is being built with gcc. The 1450 1.1 mrg <var>level</var> argument controls whether the compiler is built optimized or 1451 1.1.1.14 mrg not, values are ‘<samp>opt</samp>’ and ‘<samp>noopt</samp>’. For coverage analysis you 1452 1.1 mrg want to disable optimization, for performance analysis you want to 1453 1.1 mrg enable optimization. When coverage is enabled, the default level is 1454 1.1 mrg without optimization. 1455 1.1.1.14 mrg </p> 1456 1.1.1.14 mrg </dd> 1457 1.1.1.14 mrg <dt><code>--enable-gather-detailed-mem-stats</code></dt> 1458 1.1.1.14 mrg <dd><p>When this option is specified more detailed information on memory 1459 1.1 mrg allocation is gathered. This information is printed when using 1460 1.1.1.14 mrg <samp>-fmem-report</samp>. 1461 1.1.1.14 mrg </p> 1462 1.1.1.14 mrg </dd> 1463 1.1.1.14 mrg <dt><code>--enable-valgrind-annotations</code></dt> 1464 1.1.1.14 mrg <dd><p>Mark selected memory related operations in the compiler when run under 1465 1.1.1.8 mrg valgrind to suppress false positives. 1466 1.1.1.14 mrg </p> 1467 1.1.1.14 mrg </dd> 1468 1.1.1.14 mrg <dt><code>--enable-nls</code></dt> 1469 1.1.1.14 mrg <dt><code>--disable-nls</code></dt> 1470 1.1.1.14 mrg <dd><p>The <samp>--enable-nls</samp> option enables Native Language Support (NLS), 1471 1.1 mrg which lets GCC output diagnostics in languages other than American 1472 1.1 mrg English. Native Language Support is enabled by default if not doing a 1473 1.1.1.14 mrg canadian cross build. The <samp>--disable-nls</samp> option disables NLS. 1474 1.1.1.14 mrg </p> 1475 1.1.1.14 mrg </dd> 1476 1.1.1.14 mrg <dt><code>--with-included-gettext</code></dt> 1477 1.1.1.14 mrg <dd><p>If NLS is enabled, the <samp>--with-included-gettext</samp> option causes the build 1478 1.1.1.14 mrg procedure to prefer its copy of GNU <code>gettext</code>. 1479 1.1.1.14 mrg </p> 1480 1.1.1.14 mrg </dd> 1481 1.1.1.14 mrg <dt><code>--with-catgets</code></dt> 1482 1.1.1.14 mrg <dd><p>If NLS is enabled, and if the host lacks <code>gettext</code> but has the 1483 1.1 mrg inferior <code>catgets</code> interface, the GCC build procedure normally 1484 1.1.1.14 mrg ignores <code>catgets</code> and instead uses GCC’s copy of the GNU 1485 1.1.1.14 mrg <code>gettext</code> library. The <samp>--with-catgets</samp> option causes the 1486 1.1.1.14 mrg build procedure to use the host’s <code>catgets</code> in this situation. 1487 1.1.1.14 mrg </p> 1488 1.1.1.14 mrg </dd> 1489 1.1.1.14 mrg <dt><code>--with-libiconv-prefix=<var>dir</var></code></dt> 1490 1.1.1.14 mrg <dd><p>Search for libiconv header files in <samp><var>dir</var>/include</samp> and 1491 1.1.1.14 mrg libiconv library files in <samp><var>dir</var>/lib</samp>. 1492 1.1.1.14 mrg </p> 1493 1.1.1.14 mrg </dd> 1494 1.1.1.14 mrg <dt><code>--enable-obsolete</code></dt> 1495 1.1.1.14 mrg <dd><p>Enable configuration for an obsoleted system. If you attempt to 1496 1.1 mrg configure GCC for a system (build, host, or target) which has been 1497 1.1 mrg obsoleted, and you do not specify this flag, configure will halt with an 1498 1.1 mrg error message. 1499 1.1.1.14 mrg </p> 1500 1.1.1.14 mrg <p>All support for systems which have been obsoleted in one release of GCC 1501 1.1 mrg is removed entirely in the next major release, unless someone steps 1502 1.1 mrg forward to maintain the port. 1503 1.1.1.14 mrg </p> 1504 1.1.1.14 mrg </dd> 1505 1.1.1.14 mrg <dt><code>--enable-decimal-float</code></dt> 1506 1.1.1.14 mrg <dt><code>--enable-decimal-float=yes</code></dt> 1507 1.1.1.14 mrg <dt><code>--enable-decimal-float=no</code></dt> 1508 1.1.1.14 mrg <dt><code>--enable-decimal-float=bid</code></dt> 1509 1.1.1.14 mrg <dt><code>--enable-decimal-float=dpd</code></dt> 1510 1.1.1.14 mrg <dt><code>--disable-decimal-float</code></dt> 1511 1.1.1.14 mrg <dd><p>Enable (or disable) support for the C decimal floating point extension 1512 1.1 mrg that is in the IEEE 754-2008 standard. This is enabled by default only 1513 1.1 mrg on PowerPC, i386, and x86_64 GNU/Linux systems. Other systems may also 1514 1.1 mrg support it, but require the user to specifically enable it. You can 1515 1.1 mrg optionally control which decimal floating point format is used (either 1516 1.1.1.14 mrg ‘<samp>bid</samp>’ or ‘<samp>dpd</samp>’). The ‘<samp>bid</samp>’ (binary integer decimal) 1517 1.1.1.14 mrg format is default on i386 and x86_64 systems, and the ‘<samp>dpd</samp>’ 1518 1.1 mrg (densely packed decimal) format is default on PowerPC systems. 1519 1.1.1.14 mrg </p> 1520 1.1.1.14 mrg </dd> 1521 1.1.1.14 mrg <dt><code>--enable-fixed-point</code></dt> 1522 1.1.1.14 mrg <dt><code>--disable-fixed-point</code></dt> 1523 1.1.1.14 mrg <dd><p>Enable (or disable) support for C fixed-point arithmetic. 1524 1.1 mrg This option is enabled by default for some targets (such as MIPS) which 1525 1.1 mrg have hardware-support for fixed-point operations. On other targets, you 1526 1.1 mrg may enable this option manually. 1527 1.1.1.14 mrg </p> 1528 1.1.1.14 mrg </dd> 1529 1.1.1.14 mrg <dt><code>--with-long-double-128</code></dt> 1530 1.1.1.14 mrg <dd><p>Specify if <code>long double</code> type should be 128-bit by default on selected 1531 1.1 mrg GNU/Linux architectures. If using <code>--without-long-double-128</code>, 1532 1.1.1.14 mrg <code>long double</code> will be by default 64-bit, the same as <code>double</code> type. 1533 1.1 mrg When neither of these configure options are used, the default will be 1534 1.1 mrg 128-bit <code>long double</code> when built against GNU C Library 2.4 and later, 1535 1.1 mrg 64-bit <code>long double</code> otherwise. 1536 1.1.1.14 mrg </p> 1537 1.1.1.14 mrg </dd> 1538 1.1.1.14 mrg <dt><code>--with-long-double-format=ibm</code></dt> 1539 1.1.1.14 mrg <dt><code>--with-long-double-format=ieee</code></dt> 1540 1.1.1.14 mrg <dd><p>Specify whether <code>long double</code> uses the IBM extended double format 1541 1.1.1.14 mrg or the IEEE 128-bit floating point format on PowerPC Linux systems. 1542 1.1.1.14 mrg This configuration switch will only work on little endian PowerPC 1543 1.1.1.14 mrg Linux systems and on big endian 64-bit systems where the default cpu 1544 1.1.1.14 mrg is at least power7 (i.e. <samp>--with-cpu=power7</samp>, 1545 1.1.1.14 mrg <samp>--with-cpu=power8</samp>, or <samp>--with-cpu=power9</samp> is used). 1546 1.1.1.14 mrg </p> 1547 1.1.1.14 mrg <p>If you use the <samp>--with-long-double-64</samp> configuration option, 1548 1.1.1.14 mrg the <samp>--with-long-double-format=ibm</samp> and 1549 1.1.1.14 mrg <samp>--with-long-double-format=ieee</samp> options are ignored. 1550 1.1.1.14 mrg </p> 1551 1.1.1.14 mrg <p>The default <code>long double</code> format is to use IBM extended double. 1552 1.1.1.14 mrg Until all of the libraries are converted to use IEEE 128-bit floating 1553 1.1.1.14 mrg point, it is not recommended to use 1554 1.1.1.14 mrg <samp>--with-long-double-format=ieee</samp>. 1555 1.1.1.14 mrg </p> 1556 1.1.1.14 mrg <p>On little endian PowerPC Linux systems, if you explicitly set the 1557 1.1.1.14 mrg <code>long double</code> type, it will build multilibs to allow you to 1558 1.1.1.14 mrg select either <code>long double</code> format, unless you disable multilibs 1559 1.1.1.14 mrg with the <code>--disable-multilib</code> option. At present, 1560 1.1.1.14 mrg <code>long double</code> multilibs are not built on big endian PowerPC Linux 1561 1.1.1.14 mrg systems. If you are building multilibs, you will need to configure 1562 1.1.1.14 mrg the compiler using the <samp>--with-system-zlib</samp> option. 1563 1.1.1.14 mrg </p> 1564 1.1.1.14 mrg <p>If you do not set the <code>long double</code> type explicitly, no multilibs 1565 1.1.1.14 mrg will be generated. 1566 1.1.1.14 mrg </p> 1567 1.1.1.14 mrg </dd> 1568 1.1.1.14 mrg <dt><code>--enable-fdpic</code></dt> 1569 1.1.1.14 mrg <dd><p>On SH Linux systems, generate ELF FDPIC code. 1570 1.1.1.14 mrg </p> 1571 1.1.1.14 mrg </dd> 1572 1.1.1.14 mrg <dt><code>--with-gmp=<var>pathname</var></code></dt> 1573 1.1.1.14 mrg <dt><code>--with-gmp-include=<var>pathname</var></code></dt> 1574 1.1.1.14 mrg <dt><code>--with-gmp-lib=<var>pathname</var></code></dt> 1575 1.1.1.14 mrg <dt><code>--with-mpfr=<var>pathname</var></code></dt> 1576 1.1.1.14 mrg <dt><code>--with-mpfr-include=<var>pathname</var></code></dt> 1577 1.1.1.14 mrg <dt><code>--with-mpfr-lib=<var>pathname</var></code></dt> 1578 1.1.1.14 mrg <dt><code>--with-mpc=<var>pathname</var></code></dt> 1579 1.1.1.14 mrg <dt><code>--with-mpc-include=<var>pathname</var></code></dt> 1580 1.1.1.14 mrg <dt><code>--with-mpc-lib=<var>pathname</var></code></dt> 1581 1.1.1.14 mrg <dd><p>If you want to build GCC but do not have the GMP library, the MPFR 1582 1.1 mrg library and/or the MPC library installed in a standard location and 1583 1.1.1.3 skrll do not have their sources present in the GCC source tree then you 1584 1.1.1.3 skrll can explicitly specify the directory where they are installed 1585 1.1.1.14 mrg (‘<samp>--with-gmp=<var>gmpinstalldir</var></samp>’, 1586 1.1.1.14 mrg ‘<samp>--with-mpfr=<var>mpfrinstalldir</var></samp>’, 1587 1.1.1.14 mrg ‘<samp>--with-mpc=<var>mpcinstalldir</var></samp>’). The 1588 1.1.1.14 mrg <samp>--with-gmp=<var>gmpinstalldir</var></samp> option is shorthand for 1589 1.1.1.14 mrg <samp>--with-gmp-lib=<var>gmpinstalldir</var>/lib</samp> and 1590 1.1.1.14 mrg <samp>--with-gmp-include=<var>gmpinstalldir</var>/include</samp>. Likewise the 1591 1.1.1.14 mrg <samp>--with-mpfr=<var>mpfrinstalldir</var></samp> option is shorthand for 1592 1.1.1.14 mrg <samp>--with-mpfr-lib=<var>mpfrinstalldir</var>/lib</samp> and 1593 1.1.1.14 mrg <samp>--with-mpfr-include=<var>mpfrinstalldir</var>/include</samp>, also the 1594 1.1.1.14 mrg <samp>--with-mpc=<var>mpcinstalldir</var></samp> option is shorthand for 1595 1.1.1.14 mrg <samp>--with-mpc-lib=<var>mpcinstalldir</var>/lib</samp> and 1596 1.1.1.14 mrg <samp>--with-mpc-include=<var>mpcinstalldir</var>/include</samp>. If these 1597 1.1 mrg shorthand assumptions are not correct, you can use the explicit 1598 1.1.1.3 skrll include and lib options directly. You might also need to ensure the 1599 1.1.1.3 skrll shared libraries can be found by the dynamic linker when building and 1600 1.1.1.3 skrll using GCC, for example by setting the runtime shared library path 1601 1.1.1.14 mrg variable (<code>LD_LIBRARY_PATH</code> on GNU/Linux and Solaris systems). 1602 1.1.1.14 mrg </p> 1603 1.1.1.14 mrg <p>These flags are applicable to the host platform only. When building 1604 1.1.1.3 skrll a cross compiler, they will not be used to configure target libraries. 1605 1.1.1.14 mrg </p> 1606 1.1.1.14 mrg </dd> 1607 1.1.1.14 mrg <dt><code>--with-isl=<var>pathname</var></code></dt> 1608 1.1.1.14 mrg <dt><code>--with-isl-include=<var>pathname</var></code></dt> 1609 1.1.1.14 mrg <dt><code>--with-isl-lib=<var>pathname</var></code></dt> 1610 1.1.1.14 mrg <dd><p>If you do not have the isl library installed in a standard location and you 1611 1.1.1.6 mrg want to build GCC, you can explicitly specify the directory where it is 1612 1.1.1.14 mrg installed (‘<samp>--with-isl=<var>islinstalldir</var></samp>’). The 1613 1.1.1.14 mrg <samp>--with-isl=<var>islinstalldir</var></samp> option is shorthand for 1614 1.1.1.14 mrg <samp>--with-isl-lib=<var>islinstalldir</var>/lib</samp> and 1615 1.1.1.14 mrg <samp>--with-isl-include=<var>islinstalldir</var>/include</samp>. If this 1616 1.1.1.6 mrg shorthand assumption is not correct, you can use the explicit 1617 1.1 mrg include and lib options directly. 1618 1.1.1.14 mrg </p> 1619 1.1.1.14 mrg <p>These flags are applicable to the host platform only. When building 1620 1.1.1.3 skrll a cross compiler, they will not be used to configure target libraries. 1621 1.1.1.14 mrg </p> 1622 1.1.1.14 mrg </dd> 1623 1.1.1.14 mrg <dt><code>--with-stage1-ldflags=<var>flags</var></code></dt> 1624 1.1.1.14 mrg <dd><p>This option may be used to set linker flags to be used when linking 1625 1.1 mrg stage 1 of GCC. These are also used when linking GCC if configured with 1626 1.1.1.14 mrg <samp>--disable-bootstrap</samp>. If <samp>--with-stage1-libs</samp> is not set to a 1627 1.1.1.14 mrg value, then the default is ‘<samp>-static-libstdc++ -static-libgcc</samp>’, if 1628 1.1.1.8 mrg supported. 1629 1.1.1.14 mrg </p> 1630 1.1.1.14 mrg </dd> 1631 1.1.1.14 mrg <dt><code>--with-stage1-libs=<var>libs</var></code></dt> 1632 1.1.1.14 mrg <dd><p>This option may be used to set libraries to be used when linking stage 1 1633 1.1 mrg of GCC. These are also used when linking GCC if configured with 1634 1.1.1.14 mrg <samp>--disable-bootstrap</samp>. 1635 1.1.1.14 mrg </p> 1636 1.1.1.14 mrg </dd> 1637 1.1.1.14 mrg <dt><code>--with-boot-ldflags=<var>flags</var></code></dt> 1638 1.1.1.14 mrg <dd><p>This option may be used to set linker flags to be used when linking 1639 1.1.1.8 mrg stage 2 and later when bootstrapping GCC. If –with-boot-libs 1640 1.1.1.8 mrg is not is set to a value, then the default is 1641 1.1.1.14 mrg ‘<samp>-static-libstdc++ -static-libgcc</samp>’. 1642 1.1.1.14 mrg </p> 1643 1.1.1.14 mrg </dd> 1644 1.1.1.14 mrg <dt><code>--with-boot-libs=<var>libs</var></code></dt> 1645 1.1.1.14 mrg <dd><p>This option may be used to set libraries to be used when linking stage 2 1646 1.1.1.8 mrg and later when bootstrapping GCC. 1647 1.1.1.14 mrg </p> 1648 1.1.1.14 mrg </dd> 1649 1.1.1.14 mrg <dt><code>--with-debug-prefix-map=<var>map</var></code></dt> 1650 1.1.1.14 mrg <dd><p>Convert source directory names using <samp>-fdebug-prefix-map</samp> when 1651 1.1 mrg building runtime libraries. ‘<samp><var>map</var></samp>’ is a space-separated 1652 1.1.1.14 mrg list of maps of the form ‘<samp><var>old</var>=<var>new</var></samp>’. 1653 1.1.1.14 mrg </p> 1654 1.1.1.14 mrg </dd> 1655 1.1.1.14 mrg <dt><code>--enable-linker-build-id</code></dt> 1656 1.1.1.14 mrg <dd><p>Tells GCC to pass <samp>--build-id</samp> option to the linker for all final 1657 1.1.1.14 mrg links (links performed without the <samp>-r</samp> or <samp>--relocatable</samp> 1658 1.1 mrg option), if the linker supports it. If you specify 1659 1.1.1.14 mrg <samp>--enable-linker-build-id</samp>, but your linker does not 1660 1.1.1.14 mrg support <samp>--build-id</samp> option, a warning is issued and the 1661 1.1.1.14 mrg <samp>--enable-linker-build-id</samp> option is ignored. The default is off. 1662 1.1.1.14 mrg </p> 1663 1.1.1.14 mrg </dd> 1664 1.1.1.14 mrg <dt><code>--with-linker-hash-style=<var>choice</var></code></dt> 1665 1.1.1.14 mrg <dd><p>Tells GCC to pass <samp>--hash-style=<var>choice</var></samp> option to the 1666 1.1.1.3 skrll linker for all final links. <var>choice</var> can be one of 1667 1.1.1.14 mrg ‘<samp>sysv</samp>’, ‘<samp>gnu</samp>’, and ‘<samp>both</samp>’ where ‘<samp>sysv</samp>’ is the default. 1668 1.1.1.14 mrg </p> 1669 1.1.1.14 mrg </dd> 1670 1.1.1.14 mrg <dt><code>--enable-gnu-unique-object</code></dt> 1671 1.1.1.14 mrg <dt><code>--disable-gnu-unique-object</code></dt> 1672 1.1.1.14 mrg <dd><p>Tells GCC to use the gnu_unique_object relocation for C++ template 1673 1.1 mrg static data members and inline function local statics. Enabled by 1674 1.1.1.6 mrg default for a toolchain with an assembler that accepts it and 1675 1.1 mrg GLIBC 2.11 or above, otherwise disabled. 1676 1.1.1.14 mrg </p> 1677 1.1.1.14 mrg </dd> 1678 1.1.1.14 mrg <dt><code>--with-diagnostics-color=<var>choice</var></code></dt> 1679 1.1.1.14 mrg <dd><p>Tells GCC to use <var>choice</var> as the default for <samp>-fdiagnostics-color=</samp> 1680 1.1.1.6 mrg option (if not used explicitly on the command line). <var>choice</var> 1681 1.1.1.14 mrg can be one of ‘<samp>never</samp>’, ‘<samp>auto</samp>’, ‘<samp>always</samp>’, and ‘<samp>auto-if-env</samp>’ 1682 1.1.1.14 mrg where ‘<samp>auto</samp>’ is the default. ‘<samp>auto-if-env</samp>’ means that 1683 1.1.1.14 mrg <samp>-fdiagnostics-color=auto</samp> will be the default if <code>GCC_COLORS</code> 1684 1.1.1.6 mrg is present and non-empty in the environment, and 1685 1.1.1.14 mrg <samp>-fdiagnostics-color=never</samp> otherwise. 1686 1.1.1.14 mrg </p> 1687 1.1.1.14 mrg </dd> 1688 1.1.1.14 mrg <dt><code>--enable-lto</code></dt> 1689 1.1.1.14 mrg <dt><code>--disable-lto</code></dt> 1690 1.1.1.14 mrg <dd><p>Enable support for link-time optimization (LTO). This is enabled by 1691 1.1.1.14 mrg default, and may be disabled using <samp>--disable-lto</samp>. 1692 1.1.1.14 mrg </p> 1693 1.1.1.14 mrg </dd> 1694 1.1.1.14 mrg <dt><code>--enable-linker-plugin-configure-flags=FLAGS</code></dt> 1695 1.1.1.14 mrg <dt><code>--enable-linker-plugin-flags=FLAGS</code></dt> 1696 1.1.1.14 mrg <dd><p>By default, linker plugins (such as the LTO plugin) are built for the 1697 1.1.1.6 mrg host system architecture. For the case that the linker has a 1698 1.1.1.6 mrg different (but run-time compatible) architecture, these flags can be 1699 1.1.1.6 mrg specified to build plugins that are compatible to the linker. For 1700 1.1.1.6 mrg example, if you are building GCC for a 64-bit x86_64 1701 1.1.1.15 mrg (‘<samp>x86_64-pc-linux-gnu</samp>’) host system, but have a 32-bit x86 1702 1.1.1.14 mrg GNU/Linux (‘<samp>i686-pc-linux-gnu</samp>’) linker executable (which is 1703 1.1.1.6 mrg executable on the former system), you can configure GCC as follows for 1704 1.1.1.6 mrg getting compatible linker plugins: 1705 1.1.1.14 mrg </p> 1706 1.1.1.14 mrg <div class="smallexample"> 1707 1.1.1.14 mrg <pre class="smallexample">% <var>srcdir</var>/configure \ 1708 1.1.1.15 mrg --host=x86_64-pc-linux-gnu \ 1709 1.1.1.14 mrg --enable-linker-plugin-configure-flags=--host=i686-pc-linux-gnu \ 1710 1.1.1.14 mrg --enable-linker-plugin-flags='CC=gcc\ -m32\ -Wl,-rpath,[...]/i686-pc-linux-gnu/lib' 1711 1.1.1.14 mrg </pre></div> 1712 1.1.1.14 mrg 1713 1.1.1.14 mrg </dd> 1714 1.1.1.14 mrg <dt><code>--with-plugin-ld=<var>pathname</var></code></dt> 1715 1.1.1.14 mrg <dd><p>Enable an alternate linker to be used at link-time optimization (LTO) 1716 1.1.1.14 mrg link time when <samp>-fuse-linker-plugin</samp> is enabled. 1717 1.1.1.3 skrll This linker should have plugin support such as gold starting with 1718 1.1.1.14 mrg version 2.20 or GNU ld starting with version 2.21. 1719 1.1.1.14 mrg See <samp>-fuse-linker-plugin</samp> for details. 1720 1.1.1.14 mrg </p> 1721 1.1.1.14 mrg </dd> 1722 1.1.1.14 mrg <dt><code>--enable-canonical-system-headers</code></dt> 1723 1.1.1.14 mrg <dt><code>--disable-canonical-system-headers</code></dt> 1724 1.1.1.14 mrg <dd><p>Enable system header path canonicalization for <samp>libcpp</samp>. This can 1725 1.1.1.3 skrll produce shorter header file paths in diagnostics and dependency output 1726 1.1.1.3 skrll files, but these changed header paths may conflict with some compilation 1727 1.1.1.3 skrll environments. Enabled by default, and may be disabled using 1728 1.1.1.14 mrg <samp>--disable-canonical-system-headers</samp>. 1729 1.1.1.14 mrg </p> 1730 1.1.1.14 mrg </dd> 1731 1.1.1.14 mrg <dt><code>--with-glibc-version=<var>major</var>.<var>minor</var></code></dt> 1732 1.1.1.14 mrg <dd><p>Tell GCC that when the GNU C Library (glibc) is used on the target it 1733 1.1.1.6 mrg will be version <var>major</var>.<var>minor</var> or later. Normally this can 1734 1.1.1.14 mrg be detected from the C library’s header files, but this option may be 1735 1.1.1.6 mrg needed when bootstrapping a cross toolchain without the header files 1736 1.1.1.6 mrg available for building the initial bootstrap compiler. 1737 1.1.1.14 mrg </p> 1738 1.1.1.14 mrg <p>If GCC is configured with some multilibs that use glibc and some that 1739 1.1.1.14 mrg do not, this option applies only to the multilibs that use glibc. 1740 1.1.1.6 mrg However, such configurations may not work well as not all the relevant 1741 1.1.1.6 mrg configuration in GCC is on a per-multilib basis. 1742 1.1.1.14 mrg </p> 1743 1.1.1.14 mrg </dd> 1744 1.1.1.14 mrg <dt><code>--enable-as-accelerator-for=<var>target</var></code></dt> 1745 1.1.1.14 mrg <dd><p>Build as offload target compiler. Specify offload host triple by <var>target</var>. 1746 1.1.1.14 mrg </p> 1747 1.1.1.14 mrg </dd> 1748 1.1.1.14 mrg <dt><code>--enable-offload-targets=<var>target1</var>[=<var>path1</var>],…,<var>targetN</var>[=<var>pathN</var>]</code></dt> 1749 1.1.1.14 mrg <dd><p>Enable offloading to targets <var>target1</var>, …, <var>targetN</var>. 1750 1.1.1.6 mrg Offload compilers are expected to be already installed. Default search 1751 1.1.1.6 mrg path for them is <samp><var>exec-prefix</var></samp>, but it can be changed by 1752 1.1.1.14 mrg specifying paths <var>path1</var>, …, <var>pathN</var>. 1753 1.1.1.14 mrg </p> 1754 1.1.1.14 mrg <div class="smallexample"> 1755 1.1.1.14 mrg <pre class="smallexample">% <var>srcdir</var>/configure \ 1756 1.1.1.15 mrg --enable-offload-targets=x86_64-intelmicemul-linux-gnu=/path/to/x86_64/compiler,nvptx-none,hsa 1757 1.1.1.14 mrg </pre></div> 1758 1.1.1.8 mrg 1759 1.1.1.14 mrg <p>If ‘<samp>hsa</samp>’ is specified as one of the targets, the compiler will be 1760 1.1.1.8 mrg built with support for HSA GPU accelerators. Because the same 1761 1.1.1.8 mrg compiler will emit the accelerator code, no path should be specified. 1762 1.1.1.14 mrg </p> 1763 1.1.1.14 mrg </dd> 1764 1.1.1.14 mrg <dt><code>--with-hsa-runtime=<var>pathname</var></code></dt> 1765 1.1.1.14 mrg <dt><code>--with-hsa-runtime-include=<var>pathname</var></code></dt> 1766 1.1.1.14 mrg <dt><code>--with-hsa-runtime-lib=<var>pathname</var></code></dt> 1767 1.1.1.14 mrg <dd> 1768 1.1.1.14 mrg <p>If you configure GCC with HSA offloading but do not have the HSA 1769 1.1.1.8 mrg run-time library installed in a standard location then you can 1770 1.1.1.8 mrg explicitly specify the directory where they are installed. The 1771 1.1.1.14 mrg <samp>--with-hsa-runtime=<var>hsainstalldir</var></samp> option is a 1772 1.1.1.8 mrg shorthand for 1773 1.1.1.14 mrg <samp>--with-hsa-runtime-lib=<var>hsainstalldir</var>/lib</samp> and 1774 1.1.1.14 mrg <samp>--with-hsa-runtime-include=<var>hsainstalldir</var>/include</samp>. 1775 1.1.1.14 mrg </p> 1776 1.1.1.14 mrg </dd> 1777 1.1.1.14 mrg <dt><code>--enable-cet</code></dt> 1778 1.1.1.14 mrg <dt><code>--disable-cet</code></dt> 1779 1.1.1.14 mrg <dd><p>Enable building target run-time libraries with control-flow 1780 1.1.1.14 mrg instrumentation, see <samp>-fcf-protection</samp> option. When 1781 1.1.1.14 mrg <code>--enable-cet</code> is specified target libraries are configured 1782 1.1.1.14 mrg to add <samp>-fcf-protection</samp> and, if needed, other target 1783 1.1.1.14 mrg specific options to a set of building options. 1784 1.1.1.14 mrg </p> 1785 1.1.1.14 mrg <p>The option is disabled by default. When <code>--enable-cet=auto</code> 1786 1.1.1.14 mrg is used, it is enabled on Linux/x86 if target binutils 1787 1.1.1.14 mrg supports <code>Intel CET</code> instructions and disabled otherwise. 1788 1.1.1.14 mrg In this case the target libraries are configured to get additional 1789 1.1.1.14 mrg <samp>-fcf-protection</samp> option. 1790 1.1.1.15 mrg </p> 1791 1.1.1.15 mrg </dd> 1792 1.1.1.15 mrg <dt><code>--with-riscv-attribute=‘<samp>yes</samp>’, ‘<samp>no</samp>’ or ‘<samp>default</samp>’</code></dt> 1793 1.1.1.15 mrg <dd><p>Generate RISC-V attribute by default, in order to record extra build 1794 1.1.1.15 mrg information in object. 1795 1.1.1.15 mrg </p> 1796 1.1.1.15 mrg <p>The option is disabled by default. It is enabled on RISC-V/ELF (bare-metal) 1797 1.1.1.15 mrg target if target binutils supported. 1798 1.1.1.14 mrg </p></dd> 1799 1.1.1.7 mrg </dl> 1800 1.1.1.5 mrg 1801 1.1.1.14 mrg <a name="Cross-Compiler-Specific-Options"></a> 1802 1.1.1.14 mrg <h4 class="subheading">Cross-Compiler-Specific Options</h4> 1803 1.1 mrg <p>The following options only apply to building cross compilers. 1804 1.1.1.14 mrg </p> 1805 1.1.1.14 mrg <dl compact="compact"> 1806 1.1.1.14 mrg <dt><code>--with-sysroot</code></dt> 1807 1.1.1.14 mrg <dt><code>--with-sysroot=<var>dir</var></code></dt> 1808 1.1.1.14 mrg <dd><p>Tells GCC to consider <var>dir</var> as the root of a tree that contains 1809 1.1.1.14 mrg (a subset of) the root filesystem of the target operating system. 1810 1.1 mrg Target system headers, libraries and run-time object files will be 1811 1.1.1.3 skrll searched for in there. More specifically, this acts as if 1812 1.1.1.14 mrg <samp>--sysroot=<var>dir</var></samp> was added to the default options of the built 1813 1.1 mrg compiler. The specified directory is not copied into the 1814 1.1.1.14 mrg install tree, unlike the options <samp>--with-headers</samp> and 1815 1.1.1.14 mrg <samp>--with-libs</samp> that this option obsoletes. The default value, 1816 1.1.1.14 mrg in case <samp>--with-sysroot</samp> is not given an argument, is 1817 1.1.1.14 mrg <samp>${gcc_tooldir}/sys-root</samp>. If the specified directory is a 1818 1.1.1.14 mrg subdirectory of <samp>${exec_prefix}</samp>, then it will be found relative to 1819 1.1 mrg the GCC binaries if the installation tree is moved. 1820 1.1.1.14 mrg </p> 1821 1.1.1.14 mrg <p>This option affects the system root for the compiler used to build 1822 1.1 mrg target libraries (which runs on the build system) and the compiler newly 1823 1.1 mrg installed with <code>make install</code>; it does not affect the compiler which is 1824 1.1 mrg used to build GCC itself. 1825 1.1.1.14 mrg </p> 1826 1.1.1.14 mrg <p>If you specify the <samp>--with-native-system-header-dir=<var>dirname</var></samp> 1827 1.1.1.3 skrll option then the compiler will search that directory within <var>dirname</var> for 1828 1.1.1.14 mrg native system headers rather than the default <samp>/usr/include</samp>. 1829 1.1.1.14 mrg </p> 1830 1.1.1.14 mrg </dd> 1831 1.1.1.14 mrg <dt><code>--with-build-sysroot</code></dt> 1832 1.1.1.14 mrg <dt><code>--with-build-sysroot=<var>dir</var></code></dt> 1833 1.1.1.14 mrg <dd><p>Tells GCC to consider <var>dir</var> as the system root (see 1834 1.1.1.14 mrg <samp>--with-sysroot</samp>) while building target libraries, instead of 1835 1.1.1.14 mrg the directory specified with <samp>--with-sysroot</samp>. This option is 1836 1.1.1.14 mrg only useful when you are already using <samp>--with-sysroot</samp>. You 1837 1.1.1.14 mrg can use <samp>--with-build-sysroot</samp> when you are configuring with 1838 1.1.1.14 mrg <samp>--prefix</samp> set to a directory that is different from the one in 1839 1.1 mrg which you are installing GCC and your target libraries. 1840 1.1.1.14 mrg </p> 1841 1.1.1.14 mrg <p>This option affects the system root for the compiler used to build 1842 1.1 mrg target libraries (which runs on the build system); it does not affect 1843 1.1 mrg the compiler which is used to build GCC itself. 1844 1.1.1.14 mrg </p> 1845 1.1.1.14 mrg <p>If you specify the <samp>--with-native-system-header-dir=<var>dirname</var></samp> 1846 1.1.1.3 skrll option then the compiler will search that directory within <var>dirname</var> for 1847 1.1.1.14 mrg native system headers rather than the default <samp>/usr/include</samp>. 1848 1.1.1.14 mrg </p> 1849 1.1.1.14 mrg </dd> 1850 1.1.1.14 mrg <dt><code>--with-headers</code></dt> 1851 1.1.1.14 mrg <dt><code>--with-headers=<var>dir</var></code></dt> 1852 1.1.1.14 mrg <dd><p>Deprecated in favor of <samp>--with-sysroot</samp>. 1853 1.1.1.14 mrg Specifies that target headers are available when building a cross compiler. 1854 1.1 mrg The <var>dir</var> argument specifies a directory which has the target include 1855 1.1.1.14 mrg files. These include files will be copied into the <samp>gcc</samp> install 1856 1.1.1.14 mrg directory. <em>This option with the <var>dir</var> argument is required</em> when 1857 1.1.1.14 mrg building a cross compiler, if <samp><var>prefix</var>/<var>target</var>/sys-include</samp> 1858 1.1.1.14 mrg doesn’t pre-exist. If <samp><var>prefix</var>/<var>target</var>/sys-include</samp> does 1859 1.1.1.14 mrg pre-exist, the <var>dir</var> argument may be omitted. <code>fixincludes</code> 1860 1.1 mrg will be run on these files to make them compatible with GCC. 1861 1.1.1.14 mrg </p> 1862 1.1.1.14 mrg </dd> 1863 1.1.1.14 mrg <dt><code>--without-headers</code></dt> 1864 1.1.1.14 mrg <dd><p>Tells GCC not use any target headers from a libc when building a cross 1865 1.1 mrg compiler. When crossing to GNU/Linux, you need the headers so GCC 1866 1.1 mrg can build the exception handling for libgcc. 1867 1.1.1.14 mrg </p> 1868 1.1.1.14 mrg </dd> 1869 1.1.1.14 mrg <dt><code>--with-libs</code></dt> 1870 1.1.1.14 mrg <dt><code>--with-libs="<var>dir1</var> <var>dir2</var> … <var>dirN</var>"</code></dt> 1871 1.1.1.14 mrg <dd><p>Deprecated in favor of <samp>--with-sysroot</samp>. 1872 1.1 mrg Specifies a list of directories which contain the target runtime 1873 1.1.1.14 mrg libraries. These libraries will be copied into the <samp>gcc</samp> install 1874 1.1 mrg directory. If the directory list is omitted, this option has no 1875 1.1 mrg effect. 1876 1.1.1.14 mrg </p> 1877 1.1.1.14 mrg </dd> 1878 1.1.1.14 mrg <dt><code>--with-newlib</code></dt> 1879 1.1.1.14 mrg <dd><p>Specifies that ‘<samp>newlib</samp>’ is 1880 1.1 mrg being used as the target C library. This causes <code>__eprintf</code> to be 1881 1.1.1.14 mrg omitted from <samp>libgcc.a</samp> on the assumption that it will be provided by 1882 1.1.1.14 mrg ‘<samp>newlib</samp>’. 1883 1.1.1.14 mrg </p> 1884 1.1.1.14 mrg </dd> 1885 1.1.1.14 mrg <dt><code>--with-avrlibc</code></dt> 1886 1.1.1.14 mrg <dd><p>Specifies that ‘<samp>AVR-Libc</samp>’ is 1887 1.1.1.3 skrll being used as the target C library. This causes float support 1888 1.1.1.14 mrg functions like <code>__addsf3</code> to be omitted from <samp>libgcc.a</samp> on 1889 1.1.1.14 mrg the assumption that it will be provided by <samp>libm.a</samp>. For more 1890 1.1.1.14 mrg technical details, cf. <a href="http://gcc.gnu.org/PR54461">PR54461</a>. 1891 1.1.1.3 skrll This option is only supported for the AVR target. It is not supported for 1892 1.1.1.3 skrll RTEMS configurations, which currently use newlib. The option is 1893 1.1.1.3 skrll supported since version 4.7.2 and is the default in 4.8.0 and newer. 1894 1.1.1.14 mrg </p> 1895 1.1.1.14 mrg </dd> 1896 1.1.1.14 mrg <dt><code>--with-nds32-lib=<var>library</var></code></dt> 1897 1.1.1.14 mrg <dd><p>Specifies that <var>library</var> setting is used for building <samp>libgcc.a</samp>. 1898 1.1.1.14 mrg Currently, the valid <var>library</var> is ‘<samp>newlib</samp>’ or ‘<samp>mculib</samp>’. 1899 1.1.1.6 mrg This option is only supported for the NDS32 target. 1900 1.1.1.14 mrg </p> 1901 1.1.1.14 mrg </dd> 1902 1.1.1.14 mrg <dt><code>--with-build-time-tools=<var>dir</var></code></dt> 1903 1.1.1.14 mrg <dd><p>Specifies where to find the set of target tools (assembler, linker, etc.) 1904 1.1 mrg that will be used while building GCC itself. This option can be useful 1905 1.1 mrg if the directory layouts are different between the system you are building 1906 1.1 mrg GCC on, and the system where you will deploy it. 1907 1.1.1.14 mrg </p> 1908 1.1.1.14 mrg <p>For example, on an ‘<samp>ia64-hp-hpux</samp>’ system, you may have the GNU 1909 1.1.1.14 mrg assembler and linker in <samp>/usr/bin</samp>, and the native tools in a 1910 1.1 mrg different path, and build a toolchain that expects to find the 1911 1.1.1.14 mrg native tools in <samp>/usr/bin</samp>. 1912 1.1.1.14 mrg </p> 1913 1.1.1.14 mrg <p>When you use this option, you should ensure that <var>dir</var> includes 1914 1.1.1.14 mrg <code>ar</code>, <code>as</code>, <code>ld</code>, <code>nm</code>, 1915 1.1.1.14 mrg <code>ranlib</code> and <code>strip</code> if necessary, and possibly 1916 1.1.1.14 mrg <code>objdump</code>. Otherwise, GCC may use an inconsistent set of 1917 1.1.1.14 mrg tools. 1918 1.1.1.14 mrg </p></dd> 1919 1.1.1.7 mrg </dl> 1920 1.1.1.7 mrg 1921 1.1.1.14 mrg <a name="Overriding-configure-test-results"></a> 1922 1.1.1.14 mrg <h4 class="subsubheading">Overriding <code>configure</code> test results</h4> 1923 1.1.1.5 mrg 1924 1.1.1.7 mrg <p>Sometimes, it might be necessary to override the result of some 1925 1.1.1.14 mrg <code>configure</code> test, for example in order to ease porting to a new 1926 1.1.1.14 mrg system or work around a bug in a test. The toplevel <code>configure</code> 1927 1.1.1.7 mrg script provides three variables for this: 1928 1.1.1.14 mrg </p> 1929 1.1.1.14 mrg <dl compact="compact"> 1930 1.1.1.14 mrg <dt><code>build_configargs</code></dt> 1931 1.1.1.14 mrg <dd><a name="index-build_005fconfigargs"></a> 1932 1.1.1.14 mrg <p>The contents of this variable is passed to all build <code>configure</code> 1933 1.1.1.7 mrg scripts. 1934 1.1.1.14 mrg </p> 1935 1.1.1.14 mrg </dd> 1936 1.1.1.14 mrg <dt><code>host_configargs</code></dt> 1937 1.1.1.14 mrg <dd><a name="index-host_005fconfigargs"></a> 1938 1.1.1.14 mrg <p>The contents of this variable is passed to all host <code>configure</code> 1939 1.1.1.7 mrg scripts. 1940 1.1.1.14 mrg </p> 1941 1.1.1.14 mrg </dd> 1942 1.1.1.14 mrg <dt><code>target_configargs</code></dt> 1943 1.1.1.14 mrg <dd><a name="index-target_005fconfigargs"></a> 1944 1.1.1.14 mrg <p>The contents of this variable is passed to all target <code>configure</code> 1945 1.1.1.7 mrg scripts. 1946 1.1.1.14 mrg </p> 1947 1.1.1.14 mrg </dd> 1948 1.1.1.14 mrg </dl> 1949 1.1 mrg 1950 1.1.1.14 mrg <p>In order to avoid shell and <code>make</code> quoting issues for complex 1951 1.1.1.14 mrg overrides, you can pass a setting for <code>CONFIG_SITE</code> and set 1952 1.1.1.7 mrg variables in the site file. 1953 1.1.1.14 mrg </p> 1954 1.1.1.14 mrg <a name="Objective-C-Specific-Options"></a> 1955 1.1.1.14 mrg <h4 class="subheading">Objective-C-Specific Options</h4> 1956 1.1.1.9 mrg 1957 1.1.1.10 mrg <p>The following options apply to the build of the Objective-C runtime library. 1958 1.1.1.14 mrg </p> 1959 1.1.1.14 mrg <dl compact="compact"> 1960 1.1.1.14 mrg <dt><code>--enable-objc-gc</code></dt> 1961 1.1.1.14 mrg <dd><p>Specify that an additional variant of the GNU Objective-C runtime library 1962 1.1.1.10 mrg is built, using an external build of the Boehm-Demers-Weiser garbage 1963 1.1.1.10 mrg collector (<a href="http://www.hboehm.info/gc/">http://www.hboehm.info/gc/</a>). This library needs to be 1964 1.1.1.10 mrg available for each multilib variant, unless configured with 1965 1.1.1.14 mrg <samp>--enable-objc-gc=‘<samp>auto</samp>’</samp> in which case the build of the 1966 1.1.1.10 mrg additional runtime library is skipped when not available and the build 1967 1.1.1.10 mrg continues. 1968 1.1.1.14 mrg </p> 1969 1.1.1.14 mrg </dd> 1970 1.1.1.14 mrg <dt><code>--with-target-bdw-gc=<var>list</var></code></dt> 1971 1.1.1.14 mrg <dt><code>--with-target-bdw-gc-include=<var>list</var></code></dt> 1972 1.1.1.14 mrg <dt><code>--with-target-bdw-gc-lib=<var>list</var></code></dt> 1973 1.1.1.14 mrg <dd><p>Specify search directories for the garbage collector header files and 1974 1.1.1.10 mrg libraries. <var>list</var> is a comma separated list of key value pairs of the 1975 1.1.1.14 mrg form ‘<samp><var>multilibdir</var>=<var>path</var></samp>’, where the default multilib key 1976 1.1.1.14 mrg is named as ‘<samp>.</samp>’ (dot), or is omitted (e.g. 1977 1.1.1.14 mrg ‘<samp>--with-target-bdw-gc=/opt/bdw-gc,32=/opt-bdw-gc32</samp>’). 1978 1.1.1.14 mrg </p> 1979 1.1.1.14 mrg <p>The options <samp>--with-target-bdw-gc-include</samp> and 1980 1.1.1.14 mrg <samp>--with-target-bdw-gc-lib</samp> must always be specified together 1981 1.1.1.10 mrg for each multilib variant and they take precedence over 1982 1.1.1.14 mrg <samp>--with-target-bdw-gc</samp>. If <samp>--with-target-bdw-gc-include</samp> 1983 1.1.1.10 mrg is missing values for a multilib, then the value for the default 1984 1.1.1.14 mrg multilib is used (e.g. ‘<samp>--with-target-bdw-gc-include=/opt/bdw-gc/include</samp>’ 1985 1.1.1.14 mrg ‘<samp>--with-target-bdw-gc-lib=/opt/bdw-gc/lib64,32=/opt-bdw-gc/lib32</samp>’). 1986 1.1.1.10 mrg If none of these options are specified, the library is assumed in 1987 1.1.1.14 mrg default locations. 1988 1.1.1.14 mrg </p></dd> 1989 1.1.1.9 mrg </dl> 1990 1.1.1.3 skrll 1991 1.1.1.15 mrg <a name="D-Specific-Options"></a> 1992 1.1.1.15 mrg <h4 class="subheading">D-Specific Options</h4> 1993 1.1.1.15 mrg 1994 1.1.1.15 mrg <p>The following options apply to the build of the D runtime library. 1995 1.1.1.15 mrg </p> 1996 1.1.1.15 mrg <dl compact="compact"> 1997 1.1.1.15 mrg <dt><code>--with-target-system-zlib</code></dt> 1998 1.1.1.15 mrg <dd><p>Use installed ‘<samp>zlib</samp>’ rather than that included with GCC. This needs 1999 1.1.1.15 mrg to be available for each multilib variant, unless configured with 2000 1.1.1.15 mrg <samp>--with-target-system-zlib=‘<samp>auto</samp>’</samp> in which case the GCC included 2001 1.1.1.15 mrg ‘<samp>zlib</samp>’ is only used when the system installed library is not available. 2002 1.1.1.15 mrg </p></dd> 2003 1.1.1.15 mrg </dl> 2004 1.1.1.15 mrg 2005 1.1.1.14 mrg <hr /> 2006 1.1.1.14 mrg <p> 2007 1.1.1.9 mrg <p><a href="./index.html">Return to the GCC Installation page</a> 2008 1.1.1.14 mrg </p> 2009 1.1.1.14 mrg 2010 1.1.1.14 mrg 2011 1.1.1.14 mrg 2012 1.1.1.14 mrg 2013 1.1.1.14 mrg 2014 1.1.1.14 mrg 2015 1.1.1.14 mrg 2016 1.1.1.14 mrg 2017 1.1.1.14 mrg 2018 1.1 mrg 2019 1.1 mrg 2020 1.1.1.14 mrg </body> 2021 1.1.1.14 mrg </html> 2022
Indexes created Thu Jul 16 00:26:27 UTC 2026