Home | History | Annotate | Line # | Download | only in gdb
record-full.c revision 1.1.1.3
      1 /* Process record and replay target for GDB, the GNU debugger.
      2 
      3    Copyright (C) 2013-2015 Free Software Foundation, Inc.
      4 
      5    This file is part of GDB.
      6 
      7    This program is free software; you can redistribute it and/or modify
      8    it under the terms of the GNU General Public License as published by
      9    the Free Software Foundation; either version 3 of the License, or
     10    (at your option) any later version.
     11 
     12    This program is distributed in the hope that it will be useful,
     13    but WITHOUT ANY WARRANTY; without even the implied warranty of
     14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     15    GNU General Public License for more details.
     16 
     17    You should have received a copy of the GNU General Public License
     18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
     19 
     20 #include "defs.h"
     21 #include "gdbcmd.h"
     22 #include "regcache.h"
     23 #include "gdbthread.h"
     24 #include "event-top.h"
     25 #include "completer.h"
     26 #include "arch-utils.h"
     27 #include "gdbcore.h"
     28 #include "exec.h"
     29 #include "record.h"
     30 #include "record-full.h"
     31 #include "elf-bfd.h"
     32 #include "gcore.h"
     33 #include "event-loop.h"
     34 #include "inf-loop.h"
     35 #include "gdb_bfd.h"
     36 #include "observer.h"
     37 #include "infrun.h"
     38 
     39 #include <signal.h>
     40 
     41 /* This module implements "target record-full", also known as "process
     42    record and replay".  This target sits on top of a "normal" target
     43    (a target that "has execution"), and provides a record and replay
     44    functionality, including reverse debugging.
     45 
     46    Target record has two modes: recording, and replaying.
     47 
     48    In record mode, we intercept the to_resume and to_wait methods.
     49    Whenever gdb resumes the target, we run the target in single step
     50    mode, and we build up an execution log in which, for each executed
     51    instruction, we record all changes in memory and register state.
     52    This is invisible to the user, to whom it just looks like an
     53    ordinary debugging session (except for performance degredation).
     54 
     55    In replay mode, instead of actually letting the inferior run as a
     56    process, we simulate its execution by playing back the recorded
     57    execution log.  For each instruction in the log, we simulate the
     58    instruction's side effects by duplicating the changes that it would
     59    have made on memory and registers.  */
     60 
     61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM	200000
     62 
     63 #define RECORD_FULL_IS_REPLAY \
     64      (record_full_list->next || execution_direction == EXEC_REVERSE)
     65 
     66 #define RECORD_FULL_FILE_MAGIC	netorder32(0x20091016)
     67 
     68 /* These are the core structs of the process record functionality.
     69 
     70    A record_full_entry is a record of the value change of a register
     71    ("record_full_reg") or a part of memory ("record_full_mem").  And each
     72    instruction must have a struct record_full_entry ("record_full_end")
     73    that indicates that this is the last struct record_full_entry of this
     74    instruction.
     75 
     76    Each struct record_full_entry is linked to "record_full_list" by "prev"
     77    and "next" pointers.  */
     78 
     79 struct record_full_mem_entry
     80 {
     81   CORE_ADDR addr;
     82   int len;
     83   /* Set this flag if target memory for this entry
     84      can no longer be accessed.  */
     85   int mem_entry_not_accessible;
     86   union
     87   {
     88     gdb_byte *ptr;
     89     gdb_byte buf[sizeof (gdb_byte *)];
     90   } u;
     91 };
     92 
     93 struct record_full_reg_entry
     94 {
     95   unsigned short num;
     96   unsigned short len;
     97   union
     98   {
     99     gdb_byte *ptr;
    100     gdb_byte buf[2 * sizeof (gdb_byte *)];
    101   } u;
    102 };
    103 
    104 struct record_full_end_entry
    105 {
    106   enum gdb_signal sigval;
    107   ULONGEST insn_num;
    108 };
    109 
    110 enum record_full_type
    111 {
    112   record_full_end = 0,
    113   record_full_reg,
    114   record_full_mem
    115 };
    116 
    117 /* This is the data structure that makes up the execution log.
    118 
    119    The execution log consists of a single linked list of entries
    120    of type "struct record_full_entry".  It is doubly linked so that it
    121    can be traversed in either direction.
    122 
    123    The start of the list is anchored by a struct called
    124    "record_full_first".  The pointer "record_full_list" either points
    125    to the last entry that was added to the list (in record mode), or to
    126    the next entry in the list that will be executed (in replay mode).
    127 
    128    Each list element (struct record_full_entry), in addition to next
    129    and prev pointers, consists of a union of three entry types: mem,
    130    reg, and end.  A field called "type" determines which entry type is
    131    represented by a given list element.
    132 
    133    Each instruction that is added to the execution log is represented
    134    by a variable number of list elements ('entries').  The instruction
    135    will have one "reg" entry for each register that is changed by
    136    executing the instruction (including the PC in every case).  It
    137    will also have one "mem" entry for each memory change.  Finally,
    138    each instruction will have an "end" entry that separates it from
    139    the changes associated with the next instruction.  */
    140 
    141 struct record_full_entry
    142 {
    143   struct record_full_entry *prev;
    144   struct record_full_entry *next;
    145   enum record_full_type type;
    146   union
    147   {
    148     /* reg */
    149     struct record_full_reg_entry reg;
    150     /* mem */
    151     struct record_full_mem_entry mem;
    152     /* end */
    153     struct record_full_end_entry end;
    154   } u;
    155 };
    156 
    157 /* If true, query if PREC cannot record memory
    158    change of next instruction.  */
    159 int record_full_memory_query = 0;
    160 
    161 struct record_full_core_buf_entry
    162 {
    163   struct record_full_core_buf_entry *prev;
    164   struct target_section *p;
    165   bfd_byte *buf;
    166 };
    167 
    168 /* Record buf with core target.  */
    169 static gdb_byte *record_full_core_regbuf = NULL;
    170 static struct target_section *record_full_core_start;
    171 static struct target_section *record_full_core_end;
    172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
    173 
    174 /* The following variables are used for managing the linked list that
    175    represents the execution log.
    176 
    177    record_full_first is the anchor that holds down the beginning of
    178    the list.
    179 
    180    record_full_list serves two functions:
    181      1) In record mode, it anchors the end of the list.
    182      2) In replay mode, it traverses the list and points to
    183         the next instruction that must be emulated.
    184 
    185    record_full_arch_list_head and record_full_arch_list_tail are used
    186    to manage a separate list, which is used to build up the change
    187    elements of the currently executing instruction during record mode.
    188    When this instruction has been completely annotated in the "arch
    189    list", it will be appended to the main execution log.  */
    190 
    191 static struct record_full_entry record_full_first;
    192 static struct record_full_entry *record_full_list = &record_full_first;
    193 static struct record_full_entry *record_full_arch_list_head = NULL;
    194 static struct record_full_entry *record_full_arch_list_tail = NULL;
    195 
    196 /* 1 ask user. 0 auto delete the last struct record_full_entry.  */
    197 static int record_full_stop_at_limit = 1;
    198 /* Maximum allowed number of insns in execution log.  */
    199 static unsigned int record_full_insn_max_num
    200 	= DEFAULT_RECORD_FULL_INSN_MAX_NUM;
    201 /* Actual count of insns presently in execution log.  */
    202 static unsigned int record_full_insn_num = 0;
    203 /* Count of insns logged so far (may be larger
    204    than count of insns presently in execution log).  */
    205 static ULONGEST record_full_insn_count;
    206 
    207 /* The target_ops of process record.  */
    208 static struct target_ops record_full_ops;
    209 static struct target_ops record_full_core_ops;
    210 
    211 /* See record-full.h.  */
    212 
    213 int
    214 record_full_is_used (void)
    215 {
    216   struct target_ops *t;
    217 
    218   t = find_record_target ();
    219   return (t == &record_full_ops
    220 	  || t == &record_full_core_ops);
    221 }
    222 
    223 
    224 /* Command lists for "set/show record full".  */
    225 static struct cmd_list_element *set_record_full_cmdlist;
    226 static struct cmd_list_element *show_record_full_cmdlist;
    227 
    228 /* Command list for "record full".  */
    229 static struct cmd_list_element *record_full_cmdlist;
    230 
    231 static void record_full_goto_insn (struct record_full_entry *entry,
    232 				   enum exec_direction_kind dir);
    233 static void record_full_save (struct target_ops *self,
    234 			      const char *recfilename);
    235 
    236 /* Alloc and free functions for record_full_reg, record_full_mem, and
    237    record_full_end entries.  */
    238 
    239 /* Alloc a record_full_reg record entry.  */
    240 
    241 static inline struct record_full_entry *
    242 record_full_reg_alloc (struct regcache *regcache, int regnum)
    243 {
    244   struct record_full_entry *rec;
    245   struct gdbarch *gdbarch = get_regcache_arch (regcache);
    246 
    247   rec = xcalloc (1, sizeof (struct record_full_entry));
    248   rec->type = record_full_reg;
    249   rec->u.reg.num = regnum;
    250   rec->u.reg.len = register_size (gdbarch, regnum);
    251   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
    252     rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
    253 
    254   return rec;
    255 }
    256 
    257 /* Free a record_full_reg record entry.  */
    258 
    259 static inline void
    260 record_full_reg_release (struct record_full_entry *rec)
    261 {
    262   gdb_assert (rec->type == record_full_reg);
    263   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
    264     xfree (rec->u.reg.u.ptr);
    265   xfree (rec);
    266 }
    267 
    268 /* Alloc a record_full_mem record entry.  */
    269 
    270 static inline struct record_full_entry *
    271 record_full_mem_alloc (CORE_ADDR addr, int len)
    272 {
    273   struct record_full_entry *rec;
    274 
    275   rec = xcalloc (1, sizeof (struct record_full_entry));
    276   rec->type = record_full_mem;
    277   rec->u.mem.addr = addr;
    278   rec->u.mem.len = len;
    279   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
    280     rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
    281 
    282   return rec;
    283 }
    284 
    285 /* Free a record_full_mem record entry.  */
    286 
    287 static inline void
    288 record_full_mem_release (struct record_full_entry *rec)
    289 {
    290   gdb_assert (rec->type == record_full_mem);
    291   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
    292     xfree (rec->u.mem.u.ptr);
    293   xfree (rec);
    294 }
    295 
    296 /* Alloc a record_full_end record entry.  */
    297 
    298 static inline struct record_full_entry *
    299 record_full_end_alloc (void)
    300 {
    301   struct record_full_entry *rec;
    302 
    303   rec = xcalloc (1, sizeof (struct record_full_entry));
    304   rec->type = record_full_end;
    305 
    306   return rec;
    307 }
    308 
    309 /* Free a record_full_end record entry.  */
    310 
    311 static inline void
    312 record_full_end_release (struct record_full_entry *rec)
    313 {
    314   xfree (rec);
    315 }
    316 
    317 /* Free one record entry, any type.
    318    Return entry->type, in case caller wants to know.  */
    319 
    320 static inline enum record_full_type
    321 record_full_entry_release (struct record_full_entry *rec)
    322 {
    323   enum record_full_type type = rec->type;
    324 
    325   switch (type) {
    326   case record_full_reg:
    327     record_full_reg_release (rec);
    328     break;
    329   case record_full_mem:
    330     record_full_mem_release (rec);
    331     break;
    332   case record_full_end:
    333     record_full_end_release (rec);
    334     break;
    335   }
    336   return type;
    337 }
    338 
    339 /* Free all record entries in list pointed to by REC.  */
    340 
    341 static void
    342 record_full_list_release (struct record_full_entry *rec)
    343 {
    344   if (!rec)
    345     return;
    346 
    347   while (rec->next)
    348     rec = rec->next;
    349 
    350   while (rec->prev)
    351     {
    352       rec = rec->prev;
    353       record_full_entry_release (rec->next);
    354     }
    355 
    356   if (rec == &record_full_first)
    357     {
    358       record_full_insn_num = 0;
    359       record_full_first.next = NULL;
    360     }
    361   else
    362     record_full_entry_release (rec);
    363 }
    364 
    365 /* Free all record entries forward of the given list position.  */
    366 
    367 static void
    368 record_full_list_release_following (struct record_full_entry *rec)
    369 {
    370   struct record_full_entry *tmp = rec->next;
    371 
    372   rec->next = NULL;
    373   while (tmp)
    374     {
    375       rec = tmp->next;
    376       if (record_full_entry_release (tmp) == record_full_end)
    377 	{
    378 	  record_full_insn_num--;
    379 	  record_full_insn_count--;
    380 	}
    381       tmp = rec;
    382     }
    383 }
    384 
    385 /* Delete the first instruction from the beginning of the log, to make
    386    room for adding a new instruction at the end of the log.
    387 
    388    Note -- this function does not modify record_full_insn_num.  */
    389 
    390 static void
    391 record_full_list_release_first (void)
    392 {
    393   struct record_full_entry *tmp;
    394 
    395   if (!record_full_first.next)
    396     return;
    397 
    398   /* Loop until a record_full_end.  */
    399   while (1)
    400     {
    401       /* Cut record_full_first.next out of the linked list.  */
    402       tmp = record_full_first.next;
    403       record_full_first.next = tmp->next;
    404       tmp->next->prev = &record_full_first;
    405 
    406       /* tmp is now isolated, and can be deleted.  */
    407       if (record_full_entry_release (tmp) == record_full_end)
    408 	break;	/* End loop at first record_full_end.  */
    409 
    410       if (!record_full_first.next)
    411 	{
    412 	  gdb_assert (record_full_insn_num == 1);
    413 	  break;	/* End loop when list is empty.  */
    414 	}
    415     }
    416 }
    417 
    418 /* Add a struct record_full_entry to record_full_arch_list.  */
    419 
    420 static void
    421 record_full_arch_list_add (struct record_full_entry *rec)
    422 {
    423   if (record_debug > 1)
    424     fprintf_unfiltered (gdb_stdlog,
    425 			"Process record: record_full_arch_list_add %s.\n",
    426 			host_address_to_string (rec));
    427 
    428   if (record_full_arch_list_tail)
    429     {
    430       record_full_arch_list_tail->next = rec;
    431       rec->prev = record_full_arch_list_tail;
    432       record_full_arch_list_tail = rec;
    433     }
    434   else
    435     {
    436       record_full_arch_list_head = rec;
    437       record_full_arch_list_tail = rec;
    438     }
    439 }
    440 
    441 /* Return the value storage location of a record entry.  */
    442 static inline gdb_byte *
    443 record_full_get_loc (struct record_full_entry *rec)
    444 {
    445   switch (rec->type) {
    446   case record_full_mem:
    447     if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
    448       return rec->u.mem.u.ptr;
    449     else
    450       return rec->u.mem.u.buf;
    451   case record_full_reg:
    452     if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
    453       return rec->u.reg.u.ptr;
    454     else
    455       return rec->u.reg.u.buf;
    456   case record_full_end:
    457   default:
    458     gdb_assert_not_reached ("unexpected record_full_entry type");
    459     return NULL;
    460   }
    461 }
    462 
    463 /* Record the value of a register NUM to record_full_arch_list.  */
    464 
    465 int
    466 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
    467 {
    468   struct record_full_entry *rec;
    469 
    470   if (record_debug > 1)
    471     fprintf_unfiltered (gdb_stdlog,
    472 			"Process record: add register num = %d to "
    473 			"record list.\n",
    474 			regnum);
    475 
    476   rec = record_full_reg_alloc (regcache, regnum);
    477 
    478   regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
    479 
    480   record_full_arch_list_add (rec);
    481 
    482   return 0;
    483 }
    484 
    485 /* Record the value of a region of memory whose address is ADDR and
    486    length is LEN to record_full_arch_list.  */
    487 
    488 int
    489 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
    490 {
    491   struct record_full_entry *rec;
    492 
    493   if (record_debug > 1)
    494     fprintf_unfiltered (gdb_stdlog,
    495 			"Process record: add mem addr = %s len = %d to "
    496 			"record list.\n",
    497 			paddress (target_gdbarch (), addr), len);
    498 
    499   if (!addr)	/* FIXME: Why?  Some arch must permit it...  */
    500     return 0;
    501 
    502   rec = record_full_mem_alloc (addr, len);
    503 
    504   if (record_read_memory (target_gdbarch (), addr,
    505 			  record_full_get_loc (rec), len))
    506     {
    507       record_full_mem_release (rec);
    508       return -1;
    509     }
    510 
    511   record_full_arch_list_add (rec);
    512 
    513   return 0;
    514 }
    515 
    516 /* Add a record_full_end type struct record_full_entry to
    517    record_full_arch_list.  */
    518 
    519 int
    520 record_full_arch_list_add_end (void)
    521 {
    522   struct record_full_entry *rec;
    523 
    524   if (record_debug > 1)
    525     fprintf_unfiltered (gdb_stdlog,
    526 			"Process record: add end to arch list.\n");
    527 
    528   rec = record_full_end_alloc ();
    529   rec->u.end.sigval = GDB_SIGNAL_0;
    530   rec->u.end.insn_num = ++record_full_insn_count;
    531 
    532   record_full_arch_list_add (rec);
    533 
    534   return 0;
    535 }
    536 
    537 static void
    538 record_full_check_insn_num (int set_terminal)
    539 {
    540   if (record_full_insn_num == record_full_insn_max_num)
    541     {
    542       /* Ask user what to do.  */
    543       if (record_full_stop_at_limit)
    544 	{
    545 	  int q;
    546 
    547 	  if (set_terminal)
    548 	    target_terminal_ours ();
    549 	  q = yquery (_("Do you want to auto delete previous execution "
    550 			"log entries when record/replay buffer becomes "
    551 			"full (record full stop-at-limit)?"));
    552 	  if (set_terminal)
    553 	    target_terminal_inferior ();
    554 	  if (q)
    555 	    record_full_stop_at_limit = 0;
    556 	  else
    557 	    error (_("Process record: stopped by user."));
    558 	}
    559     }
    560 }
    561 
    562 static void
    563 record_full_arch_list_cleanups (void *ignore)
    564 {
    565   record_full_list_release (record_full_arch_list_tail);
    566 }
    567 
    568 /* Before inferior step (when GDB record the running message, inferior
    569    only can step), GDB will call this function to record the values to
    570    record_full_list.  This function will call gdbarch_process_record to
    571    record the running message of inferior and set them to
    572    record_full_arch_list, and add it to record_full_list.  */
    573 
    574 static int
    575 record_full_message (struct regcache *regcache, enum gdb_signal signal)
    576 {
    577   int ret;
    578   struct gdbarch *gdbarch = get_regcache_arch (regcache);
    579   struct cleanup *old_cleanups
    580     = make_cleanup (record_full_arch_list_cleanups, 0);
    581 
    582   record_full_arch_list_head = NULL;
    583   record_full_arch_list_tail = NULL;
    584 
    585   /* Check record_full_insn_num.  */
    586   record_full_check_insn_num (1);
    587 
    588   /* If gdb sends a signal value to target_resume,
    589      save it in the 'end' field of the previous instruction.
    590 
    591      Maybe process record should record what really happened,
    592      rather than what gdb pretends has happened.
    593 
    594      So if Linux delivered the signal to the child process during
    595      the record mode, we will record it and deliver it again in
    596      the replay mode.
    597 
    598      If user says "ignore this signal" during the record mode, then
    599      it will be ignored again during the replay mode (no matter if
    600      the user says something different, like "deliver this signal"
    601      during the replay mode).
    602 
    603      User should understand that nothing he does during the replay
    604      mode will change the behavior of the child.  If he tries,
    605      then that is a user error.
    606 
    607      But we should still deliver the signal to gdb during the replay,
    608      if we delivered it during the recording.  Therefore we should
    609      record the signal during record_full_wait, not
    610      record_full_resume.  */
    611   if (record_full_list != &record_full_first)  /* FIXME better way to check */
    612     {
    613       gdb_assert (record_full_list->type == record_full_end);
    614       record_full_list->u.end.sigval = signal;
    615     }
    616 
    617   if (signal == GDB_SIGNAL_0
    618       || !gdbarch_process_record_signal_p (gdbarch))
    619     ret = gdbarch_process_record (gdbarch,
    620 				  regcache,
    621 				  regcache_read_pc (regcache));
    622   else
    623     ret = gdbarch_process_record_signal (gdbarch,
    624 					 regcache,
    625 					 signal);
    626 
    627   if (ret > 0)
    628     error (_("Process record: inferior program stopped."));
    629   if (ret < 0)
    630     error (_("Process record: failed to record execution log."));
    631 
    632   discard_cleanups (old_cleanups);
    633 
    634   record_full_list->next = record_full_arch_list_head;
    635   record_full_arch_list_head->prev = record_full_list;
    636   record_full_list = record_full_arch_list_tail;
    637 
    638   if (record_full_insn_num == record_full_insn_max_num)
    639     record_full_list_release_first ();
    640   else
    641     record_full_insn_num++;
    642 
    643   return 1;
    644 }
    645 
    646 struct record_full_message_args {
    647   struct regcache *regcache;
    648   enum gdb_signal signal;
    649 };
    650 
    651 static int
    652 record_full_message_wrapper (void *args)
    653 {
    654   struct record_full_message_args *record_full_args = args;
    655 
    656   return record_full_message (record_full_args->regcache,
    657 			      record_full_args->signal);
    658 }
    659 
    660 static int
    661 record_full_message_wrapper_safe (struct regcache *regcache,
    662 				  enum gdb_signal signal)
    663 {
    664   struct record_full_message_args args;
    665 
    666   args.regcache = regcache;
    667   args.signal = signal;
    668 
    669   return catch_errors (record_full_message_wrapper, &args, NULL,
    670 		       RETURN_MASK_ALL);
    671 }
    672 
    673 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
    674    doesn't need record.  */
    675 
    676 static int record_full_gdb_operation_disable = 0;
    677 
    678 struct cleanup *
    679 record_full_gdb_operation_disable_set (void)
    680 {
    681   struct cleanup *old_cleanups = NULL;
    682 
    683   old_cleanups =
    684     make_cleanup_restore_integer (&record_full_gdb_operation_disable);
    685   record_full_gdb_operation_disable = 1;
    686 
    687   return old_cleanups;
    688 }
    689 
    690 /* Flag set to TRUE for target_stopped_by_watchpoint.  */
    691 static enum target_stop_reason record_full_stop_reason
    692   = TARGET_STOPPED_BY_NO_REASON;
    693 
    694 /* Execute one instruction from the record log.  Each instruction in
    695    the log will be represented by an arbitrary sequence of register
    696    entries and memory entries, followed by an 'end' entry.  */
    697 
    698 static inline void
    699 record_full_exec_insn (struct regcache *regcache,
    700 		       struct gdbarch *gdbarch,
    701 		       struct record_full_entry *entry)
    702 {
    703   switch (entry->type)
    704     {
    705     case record_full_reg: /* reg */
    706       {
    707         gdb_byte reg[MAX_REGISTER_SIZE];
    708 
    709         if (record_debug > 1)
    710           fprintf_unfiltered (gdb_stdlog,
    711                               "Process record: record_full_reg %s to "
    712                               "inferior num = %d.\n",
    713                               host_address_to_string (entry),
    714                               entry->u.reg.num);
    715 
    716         regcache_cooked_read (regcache, entry->u.reg.num, reg);
    717         regcache_cooked_write (regcache, entry->u.reg.num,
    718 			       record_full_get_loc (entry));
    719         memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
    720       }
    721       break;
    722 
    723     case record_full_mem: /* mem */
    724       {
    725 	/* Nothing to do if the entry is flagged not_accessible.  */
    726         if (!entry->u.mem.mem_entry_not_accessible)
    727           {
    728             gdb_byte *mem = alloca (entry->u.mem.len);
    729 
    730             if (record_debug > 1)
    731               fprintf_unfiltered (gdb_stdlog,
    732                                   "Process record: record_full_mem %s to "
    733                                   "inferior addr = %s len = %d.\n",
    734                                   host_address_to_string (entry),
    735                                   paddress (gdbarch, entry->u.mem.addr),
    736                                   entry->u.mem.len);
    737 
    738             if (record_read_memory (gdbarch,
    739 				    entry->u.mem.addr, mem, entry->u.mem.len))
    740 	      entry->u.mem.mem_entry_not_accessible = 1;
    741             else
    742               {
    743                 if (target_write_memory (entry->u.mem.addr,
    744 					 record_full_get_loc (entry),
    745 					 entry->u.mem.len))
    746                   {
    747                     entry->u.mem.mem_entry_not_accessible = 1;
    748                     if (record_debug)
    749                       warning (_("Process record: error writing memory at "
    750 				 "addr = %s len = %d."),
    751                                paddress (gdbarch, entry->u.mem.addr),
    752                                entry->u.mem.len);
    753                   }
    754                 else
    755 		  {
    756 		    memcpy (record_full_get_loc (entry), mem,
    757 			    entry->u.mem.len);
    758 
    759 		    /* We've changed memory --- check if a hardware
    760 		       watchpoint should trap.  Note that this
    761 		       presently assumes the target beneath supports
    762 		       continuable watchpoints.  On non-continuable
    763 		       watchpoints target, we'll want to check this
    764 		       _before_ actually doing the memory change, and
    765 		       not doing the change at all if the watchpoint
    766 		       traps.  */
    767 		    if (hardware_watchpoint_inserted_in_range
    768 			(get_regcache_aspace (regcache),
    769 			 entry->u.mem.addr, entry->u.mem.len))
    770 		      record_full_stop_reason = TARGET_STOPPED_BY_WATCHPOINT;
    771 		  }
    772               }
    773           }
    774       }
    775       break;
    776     }
    777 }
    778 
    779 static void record_full_restore (void);
    780 
    781 /* Asynchronous signal handle registered as event loop source for when
    782    we have pending events ready to be passed to the core.  */
    783 
    784 static struct async_event_handler *record_full_async_inferior_event_token;
    785 
    786 static void
    787 record_full_async_inferior_event_handler (gdb_client_data data)
    788 {
    789   inferior_event_handler (INF_REG_EVENT, NULL);
    790 }
    791 
    792 /* Open the process record target.  */
    793 
    794 static void
    795 record_full_core_open_1 (const char *name, int from_tty)
    796 {
    797   struct regcache *regcache = get_current_regcache ();
    798   int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
    799   int i;
    800 
    801   /* Get record_full_core_regbuf.  */
    802   target_fetch_registers (regcache, -1);
    803   record_full_core_regbuf = xmalloc (MAX_REGISTER_SIZE * regnum);
    804   for (i = 0; i < regnum; i ++)
    805     regcache_raw_collect (regcache, i,
    806 			  record_full_core_regbuf + MAX_REGISTER_SIZE * i);
    807 
    808   /* Get record_full_core_start and record_full_core_end.  */
    809   if (build_section_table (core_bfd, &record_full_core_start,
    810 			   &record_full_core_end))
    811     {
    812       xfree (record_full_core_regbuf);
    813       record_full_core_regbuf = NULL;
    814       error (_("\"%s\": Can't find sections: %s"),
    815 	     bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
    816     }
    817 
    818   push_target (&record_full_core_ops);
    819   record_full_restore ();
    820 }
    821 
    822 /* "to_open" target method for 'live' processes.  */
    823 
    824 static void
    825 record_full_open_1 (const char *name, int from_tty)
    826 {
    827   if (record_debug)
    828     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
    829 
    830   /* check exec */
    831   if (!target_has_execution)
    832     error (_("Process record: the program is not being run."));
    833   if (non_stop)
    834     error (_("Process record target can't debug inferior in non-stop mode "
    835 	     "(non-stop)."));
    836 
    837   if (!gdbarch_process_record_p (target_gdbarch ()))
    838     error (_("Process record: the current architecture doesn't support "
    839 	     "record function."));
    840 
    841   push_target (&record_full_ops);
    842 }
    843 
    844 static void record_full_init_record_breakpoints (void);
    845 
    846 /* "to_open" target method.  Open the process record target.  */
    847 
    848 static void
    849 record_full_open (const char *name, int from_tty)
    850 {
    851   struct target_ops *t;
    852 
    853   if (record_debug)
    854     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
    855 
    856   record_preopen ();
    857 
    858   /* Reset */
    859   record_full_insn_num = 0;
    860   record_full_insn_count = 0;
    861   record_full_list = &record_full_first;
    862   record_full_list->next = NULL;
    863 
    864   if (core_bfd)
    865     record_full_core_open_1 (name, from_tty);
    866   else
    867     record_full_open_1 (name, from_tty);
    868 
    869   /* Register extra event sources in the event loop.  */
    870   record_full_async_inferior_event_token
    871     = create_async_event_handler (record_full_async_inferior_event_handler,
    872 				  NULL);
    873 
    874   record_full_init_record_breakpoints ();
    875 
    876   observer_notify_record_changed (current_inferior (),  1);
    877 }
    878 
    879 /* "to_close" target method.  Close the process record target.  */
    880 
    881 static void
    882 record_full_close (struct target_ops *self)
    883 {
    884   struct record_full_core_buf_entry *entry;
    885 
    886   if (record_debug)
    887     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
    888 
    889   record_full_list_release (record_full_list);
    890 
    891   /* Release record_full_core_regbuf.  */
    892   if (record_full_core_regbuf)
    893     {
    894       xfree (record_full_core_regbuf);
    895       record_full_core_regbuf = NULL;
    896     }
    897 
    898   /* Release record_full_core_buf_list.  */
    899   if (record_full_core_buf_list)
    900     {
    901       for (entry = record_full_core_buf_list->prev; entry;
    902 	   entry = entry->prev)
    903 	{
    904 	  xfree (record_full_core_buf_list);
    905 	  record_full_core_buf_list = entry;
    906 	}
    907       record_full_core_buf_list = NULL;
    908     }
    909 
    910   if (record_full_async_inferior_event_token)
    911     delete_async_event_handler (&record_full_async_inferior_event_token);
    912 }
    913 
    914 /* "to_async" target method.  */
    915 
    916 static void
    917 record_full_async (struct target_ops *ops, int enable)
    918 {
    919   if (enable)
    920     mark_async_event_handler (record_full_async_inferior_event_token);
    921   else
    922     clear_async_event_handler (record_full_async_inferior_event_token);
    923 
    924   ops->beneath->to_async (ops->beneath, enable);
    925 }
    926 
    927 static int record_full_resume_step = 0;
    928 
    929 /* True if we've been resumed, and so each record_full_wait call should
    930    advance execution.  If this is false, record_full_wait will return a
    931    TARGET_WAITKIND_IGNORE.  */
    932 static int record_full_resumed = 0;
    933 
    934 /* The execution direction of the last resume we got.  This is
    935    necessary for async mode.  Vis (order is not strictly accurate):
    936 
    937    1. user has the global execution direction set to forward
    938    2. user does a reverse-step command
    939    3. record_full_resume is called with global execution direction
    940       temporarily switched to reverse
    941    4. GDB's execution direction is reverted back to forward
    942    5. target record notifies event loop there's an event to handle
    943    6. infrun asks the target which direction was it going, and switches
    944       the global execution direction accordingly (to reverse)
    945    7. infrun polls an event out of the record target, and handles it
    946    8. GDB goes back to the event loop, and goto #4.
    947 */
    948 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
    949 
    950 /* "to_resume" target method.  Resume the process record target.  */
    951 
    952 static void
    953 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
    954 		    enum gdb_signal signal)
    955 {
    956   record_full_resume_step = step;
    957   record_full_resumed = 1;
    958   record_full_execution_dir = execution_direction;
    959 
    960   if (!RECORD_FULL_IS_REPLAY)
    961     {
    962       struct gdbarch *gdbarch = target_thread_architecture (ptid);
    963 
    964       record_full_message (get_current_regcache (), signal);
    965 
    966       if (!step)
    967         {
    968           /* This is not hard single step.  */
    969           if (!gdbarch_software_single_step_p (gdbarch))
    970             {
    971               /* This is a normal continue.  */
    972               step = 1;
    973             }
    974           else
    975             {
    976               /* This arch support soft sigle step.  */
    977               if (thread_has_single_step_breakpoints_set (inferior_thread ()))
    978                 {
    979                   /* This is a soft single step.  */
    980                   record_full_resume_step = 1;
    981                 }
    982               else
    983                 {
    984                   /* This is a continue.
    985                      Try to insert a soft single step breakpoint.  */
    986                   if (!gdbarch_software_single_step (gdbarch,
    987                                                      get_current_frame ()))
    988                     {
    989                       /* This system don't want use soft single step.
    990                          Use hard sigle step.  */
    991                       step = 1;
    992                     }
    993                 }
    994             }
    995         }
    996 
    997       /* Make sure the target beneath reports all signals.  */
    998       target_pass_signals (0, NULL);
    999 
   1000       ops->beneath->to_resume (ops->beneath, ptid, step, signal);
   1001     }
   1002 
   1003   /* We are about to start executing the inferior (or simulate it),
   1004      let's register it with the event loop.  */
   1005   if (target_can_async_p ())
   1006     target_async (1);
   1007 }
   1008 
   1009 static int record_full_get_sig = 0;
   1010 
   1011 /* SIGINT signal handler, registered by "to_wait" method.  */
   1012 
   1013 static void
   1014 record_full_sig_handler (int signo)
   1015 {
   1016   if (record_debug)
   1017     fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
   1018 
   1019   /* It will break the running inferior in replay mode.  */
   1020   record_full_resume_step = 1;
   1021 
   1022   /* It will let record_full_wait set inferior status to get the signal
   1023      SIGINT.  */
   1024   record_full_get_sig = 1;
   1025 }
   1026 
   1027 static void
   1028 record_full_wait_cleanups (void *ignore)
   1029 {
   1030   if (execution_direction == EXEC_REVERSE)
   1031     {
   1032       if (record_full_list->next)
   1033 	record_full_list = record_full_list->next;
   1034     }
   1035   else
   1036     record_full_list = record_full_list->prev;
   1037 }
   1038 
   1039 /* "to_wait" target method for process record target.
   1040 
   1041    In record mode, the target is always run in singlestep mode
   1042    (even when gdb says to continue).  The to_wait method intercepts
   1043    the stop events and determines which ones are to be passed on to
   1044    gdb.  Most stop events are just singlestep events that gdb is not
   1045    to know about, so the to_wait method just records them and keeps
   1046    singlestepping.
   1047 
   1048    In replay mode, this function emulates the recorded execution log,
   1049    one instruction at a time (forward or backward), and determines
   1050    where to stop.  */
   1051 
   1052 static ptid_t
   1053 record_full_wait_1 (struct target_ops *ops,
   1054 		    ptid_t ptid, struct target_waitstatus *status,
   1055 		    int options)
   1056 {
   1057   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
   1058 
   1059   if (record_debug)
   1060     fprintf_unfiltered (gdb_stdlog,
   1061 			"Process record: record_full_wait "
   1062 			"record_full_resume_step = %d, "
   1063 			"record_full_resumed = %d, direction=%s\n",
   1064 			record_full_resume_step, record_full_resumed,
   1065 			record_full_execution_dir == EXEC_FORWARD
   1066 			? "forward" : "reverse");
   1067 
   1068   if (!record_full_resumed)
   1069     {
   1070       gdb_assert ((options & TARGET_WNOHANG) != 0);
   1071 
   1072       /* No interesting event.  */
   1073       status->kind = TARGET_WAITKIND_IGNORE;
   1074       return minus_one_ptid;
   1075     }
   1076 
   1077   record_full_get_sig = 0;
   1078   signal (SIGINT, record_full_sig_handler);
   1079 
   1080   record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
   1081 
   1082   if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
   1083     {
   1084       if (record_full_resume_step)
   1085 	{
   1086 	  /* This is a single step.  */
   1087 	  return ops->beneath->to_wait (ops->beneath, ptid, status, options);
   1088 	}
   1089       else
   1090 	{
   1091 	  /* This is not a single step.  */
   1092 	  ptid_t ret;
   1093 	  CORE_ADDR tmp_pc;
   1094 	  struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
   1095 
   1096 	  while (1)
   1097 	    {
   1098 	      struct thread_info *tp;
   1099 
   1100 	      ret = ops->beneath->to_wait (ops->beneath, ptid, status, options);
   1101 	      if (status->kind == TARGET_WAITKIND_IGNORE)
   1102 		{
   1103 		  if (record_debug)
   1104 		    fprintf_unfiltered (gdb_stdlog,
   1105 					"Process record: record_full_wait "
   1106 					"target beneath not done yet\n");
   1107 		  return ret;
   1108 		}
   1109 
   1110 	      ALL_NON_EXITED_THREADS (tp)
   1111                 delete_single_step_breakpoints (tp);
   1112 
   1113 	      if (record_full_resume_step)
   1114 		return ret;
   1115 
   1116 	      /* Is this a SIGTRAP?  */
   1117 	      if (status->kind == TARGET_WAITKIND_STOPPED
   1118 		  && status->value.sig == GDB_SIGNAL_TRAP)
   1119 		{
   1120 		  struct regcache *regcache;
   1121 		  struct address_space *aspace;
   1122 		  enum target_stop_reason *stop_reason_p
   1123 		    = &record_full_stop_reason;
   1124 
   1125 		  /* Yes -- this is likely our single-step finishing,
   1126 		     but check if there's any reason the core would be
   1127 		     interested in the event.  */
   1128 
   1129 		  registers_changed ();
   1130 		  regcache = get_current_regcache ();
   1131 		  tmp_pc = regcache_read_pc (regcache);
   1132 		  aspace = get_regcache_aspace (regcache);
   1133 
   1134 		  if (target_stopped_by_watchpoint ())
   1135 		    {
   1136 		      /* Always interested in watchpoints.  */
   1137 		    }
   1138 		  else if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
   1139 							       stop_reason_p))
   1140 		    {
   1141 		      /* There is a breakpoint here.  Let the core
   1142 			 handle it.  */
   1143 		    }
   1144 		  else
   1145 		    {
   1146 		      /* This is a single-step trap.  Record the
   1147 		         insn and issue another step.
   1148                          FIXME: this part can be a random SIGTRAP too.
   1149                          But GDB cannot handle it.  */
   1150                       int step = 1;
   1151 
   1152 		      if (!record_full_message_wrapper_safe (regcache,
   1153 							     GDB_SIGNAL_0))
   1154   			{
   1155                            status->kind = TARGET_WAITKIND_STOPPED;
   1156                            status->value.sig = GDB_SIGNAL_0;
   1157                            break;
   1158   			}
   1159 
   1160                       if (gdbarch_software_single_step_p (gdbarch))
   1161 			{
   1162 			  /* Try to insert the software single step breakpoint.
   1163 			     If insert success, set step to 0.  */
   1164 			  set_executing (inferior_ptid, 0);
   1165 			  reinit_frame_cache ();
   1166 			  if (gdbarch_software_single_step (gdbarch,
   1167                                                             get_current_frame ()))
   1168 			    step = 0;
   1169 			  set_executing (inferior_ptid, 1);
   1170 			}
   1171 
   1172 		      if (record_debug)
   1173 			fprintf_unfiltered (gdb_stdlog,
   1174 					    "Process record: record_full_wait "
   1175 					    "issuing one more step in the "
   1176 					    "target beneath\n");
   1177 		      ops->beneath->to_resume (ops->beneath, ptid, step,
   1178 					       GDB_SIGNAL_0);
   1179 		      continue;
   1180 		    }
   1181 		}
   1182 
   1183 	      /* The inferior is broken by a breakpoint or a signal.  */
   1184 	      break;
   1185 	    }
   1186 
   1187 	  return ret;
   1188 	}
   1189     }
   1190   else
   1191     {
   1192       struct regcache *regcache = get_current_regcache ();
   1193       struct gdbarch *gdbarch = get_regcache_arch (regcache);
   1194       struct address_space *aspace = get_regcache_aspace (regcache);
   1195       int continue_flag = 1;
   1196       int first_record_full_end = 1;
   1197       struct cleanup *old_cleanups
   1198 	= make_cleanup (record_full_wait_cleanups, 0);
   1199       CORE_ADDR tmp_pc;
   1200 
   1201       record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
   1202       status->kind = TARGET_WAITKIND_STOPPED;
   1203 
   1204       /* Check breakpoint when forward execute.  */
   1205       if (execution_direction == EXEC_FORWARD)
   1206 	{
   1207 	  tmp_pc = regcache_read_pc (regcache);
   1208 	  if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
   1209 						  &record_full_stop_reason))
   1210 	    {
   1211 	      if (record_debug)
   1212 		fprintf_unfiltered (gdb_stdlog,
   1213 				    "Process record: break at %s.\n",
   1214 				    paddress (gdbarch, tmp_pc));
   1215 	      goto replay_out;
   1216 	    }
   1217 	}
   1218 
   1219       /* If GDB is in terminal_inferior mode, it will not get the signal.
   1220          And in GDB replay mode, GDB doesn't need to be in terminal_inferior
   1221          mode, because inferior will not executed.
   1222          Then set it to terminal_ours to make GDB get the signal.  */
   1223       target_terminal_ours ();
   1224 
   1225       /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
   1226          instruction.  */
   1227       if (execution_direction == EXEC_FORWARD && record_full_list->next)
   1228 	record_full_list = record_full_list->next;
   1229 
   1230       /* Loop over the record_full_list, looking for the next place to
   1231 	 stop.  */
   1232       do
   1233 	{
   1234 	  /* Check for beginning and end of log.  */
   1235 	  if (execution_direction == EXEC_REVERSE
   1236 	      && record_full_list == &record_full_first)
   1237 	    {
   1238 	      /* Hit beginning of record log in reverse.  */
   1239 	      status->kind = TARGET_WAITKIND_NO_HISTORY;
   1240 	      break;
   1241 	    }
   1242 	  if (execution_direction != EXEC_REVERSE && !record_full_list->next)
   1243 	    {
   1244 	      /* Hit end of record log going forward.  */
   1245 	      status->kind = TARGET_WAITKIND_NO_HISTORY;
   1246 	      break;
   1247 	    }
   1248 
   1249           record_full_exec_insn (regcache, gdbarch, record_full_list);
   1250 
   1251 	  if (record_full_list->type == record_full_end)
   1252 	    {
   1253 	      if (record_debug > 1)
   1254 		fprintf_unfiltered (gdb_stdlog,
   1255 				    "Process record: record_full_end %s to "
   1256 				    "inferior.\n",
   1257 				    host_address_to_string (record_full_list));
   1258 
   1259 	      if (first_record_full_end && execution_direction == EXEC_REVERSE)
   1260 		{
   1261 		  /* When reverse excute, the first record_full_end is the
   1262 		     part of current instruction.  */
   1263 		  first_record_full_end = 0;
   1264 		}
   1265 	      else
   1266 		{
   1267 		  /* In EXEC_REVERSE mode, this is the record_full_end of prev
   1268 		     instruction.
   1269 		     In EXEC_FORWARD mode, this is the record_full_end of
   1270 		     current instruction.  */
   1271 		  /* step */
   1272 		  if (record_full_resume_step)
   1273 		    {
   1274 		      if (record_debug > 1)
   1275 			fprintf_unfiltered (gdb_stdlog,
   1276 					    "Process record: step.\n");
   1277 		      continue_flag = 0;
   1278 		    }
   1279 
   1280 		  /* check breakpoint */
   1281 		  tmp_pc = regcache_read_pc (regcache);
   1282 		  if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
   1283 							  &record_full_stop_reason))
   1284 		    {
   1285 		      if (record_debug)
   1286 			fprintf_unfiltered (gdb_stdlog,
   1287 					    "Process record: break "
   1288 					    "at %s.\n",
   1289 					    paddress (gdbarch, tmp_pc));
   1290 
   1291 		      continue_flag = 0;
   1292 		    }
   1293 
   1294 		  if (record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT)
   1295 		    {
   1296 		      if (record_debug)
   1297 			fprintf_unfiltered (gdb_stdlog,
   1298 					    "Process record: hit hw "
   1299 					    "watchpoint.\n");
   1300 		      continue_flag = 0;
   1301 		    }
   1302 		  /* Check target signal */
   1303 		  if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
   1304 		    /* FIXME: better way to check */
   1305 		    continue_flag = 0;
   1306 		}
   1307 	    }
   1308 
   1309 	  if (continue_flag)
   1310 	    {
   1311 	      if (execution_direction == EXEC_REVERSE)
   1312 		{
   1313 		  if (record_full_list->prev)
   1314 		    record_full_list = record_full_list->prev;
   1315 		}
   1316 	      else
   1317 		{
   1318 		  if (record_full_list->next)
   1319 		    record_full_list = record_full_list->next;
   1320 		}
   1321 	    }
   1322 	}
   1323       while (continue_flag);
   1324 
   1325 replay_out:
   1326       if (record_full_get_sig)
   1327 	status->value.sig = GDB_SIGNAL_INT;
   1328       else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
   1329 	/* FIXME: better way to check */
   1330 	status->value.sig = record_full_list->u.end.sigval;
   1331       else
   1332 	status->value.sig = GDB_SIGNAL_TRAP;
   1333 
   1334       discard_cleanups (old_cleanups);
   1335     }
   1336 
   1337   signal (SIGINT, handle_sigint);
   1338 
   1339   do_cleanups (set_cleanups);
   1340   return inferior_ptid;
   1341 }
   1342 
   1343 static ptid_t
   1344 record_full_wait (struct target_ops *ops,
   1345 		  ptid_t ptid, struct target_waitstatus *status,
   1346 		  int options)
   1347 {
   1348   ptid_t return_ptid;
   1349 
   1350   return_ptid = record_full_wait_1 (ops, ptid, status, options);
   1351   if (status->kind != TARGET_WAITKIND_IGNORE)
   1352     {
   1353       /* We're reporting a stop.  Make sure any spurious
   1354 	 target_wait(WNOHANG) doesn't advance the target until the
   1355 	 core wants us resumed again.  */
   1356       record_full_resumed = 0;
   1357     }
   1358   return return_ptid;
   1359 }
   1360 
   1361 static int
   1362 record_full_stopped_by_watchpoint (struct target_ops *ops)
   1363 {
   1364   if (RECORD_FULL_IS_REPLAY)
   1365     return record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT;
   1366   else
   1367     return ops->beneath->to_stopped_by_watchpoint (ops->beneath);
   1368 }
   1369 
   1370 static int
   1371 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
   1372 {
   1373   if (RECORD_FULL_IS_REPLAY)
   1374     return 0;
   1375   else
   1376     return ops->beneath->to_stopped_data_address (ops->beneath, addr_p);
   1377 }
   1378 
   1379 /* The to_stopped_by_sw_breakpoint method of target record-full.  */
   1380 
   1381 static int
   1382 record_full_stopped_by_sw_breakpoint (struct target_ops *ops)
   1383 {
   1384   return record_full_stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT;
   1385 }
   1386 
   1387 /* The to_supports_stopped_by_sw_breakpoint method of target
   1388    record-full.  */
   1389 
   1390 static int
   1391 record_full_supports_stopped_by_sw_breakpoint (struct target_ops *ops)
   1392 {
   1393   return 1;
   1394 }
   1395 
   1396 /* The to_stopped_by_hw_breakpoint method of target record-full.  */
   1397 
   1398 static int
   1399 record_full_stopped_by_hw_breakpoint (struct target_ops *ops)
   1400 {
   1401   return record_full_stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT;
   1402 }
   1403 
   1404 /* The to_supports_stopped_by_sw_breakpoint method of target
   1405    record-full.  */
   1406 
   1407 static int
   1408 record_full_supports_stopped_by_hw_breakpoint (struct target_ops *ops)
   1409 {
   1410   return 1;
   1411 }
   1412 
   1413 /* Record registers change (by user or by GDB) to list as an instruction.  */
   1414 
   1415 static void
   1416 record_full_registers_change (struct regcache *regcache, int regnum)
   1417 {
   1418   /* Check record_full_insn_num.  */
   1419   record_full_check_insn_num (0);
   1420 
   1421   record_full_arch_list_head = NULL;
   1422   record_full_arch_list_tail = NULL;
   1423 
   1424   if (regnum < 0)
   1425     {
   1426       int i;
   1427 
   1428       for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
   1429 	{
   1430 	  if (record_full_arch_list_add_reg (regcache, i))
   1431 	    {
   1432 	      record_full_list_release (record_full_arch_list_tail);
   1433 	      error (_("Process record: failed to record execution log."));
   1434 	    }
   1435 	}
   1436     }
   1437   else
   1438     {
   1439       if (record_full_arch_list_add_reg (regcache, regnum))
   1440 	{
   1441 	  record_full_list_release (record_full_arch_list_tail);
   1442 	  error (_("Process record: failed to record execution log."));
   1443 	}
   1444     }
   1445   if (record_full_arch_list_add_end ())
   1446     {
   1447       record_full_list_release (record_full_arch_list_tail);
   1448       error (_("Process record: failed to record execution log."));
   1449     }
   1450   record_full_list->next = record_full_arch_list_head;
   1451   record_full_arch_list_head->prev = record_full_list;
   1452   record_full_list = record_full_arch_list_tail;
   1453 
   1454   if (record_full_insn_num == record_full_insn_max_num)
   1455     record_full_list_release_first ();
   1456   else
   1457     record_full_insn_num++;
   1458 }
   1459 
   1460 /* "to_store_registers" method for process record target.  */
   1461 
   1462 static void
   1463 record_full_store_registers (struct target_ops *ops,
   1464 			     struct regcache *regcache,
   1465 			     int regno)
   1466 {
   1467   if (!record_full_gdb_operation_disable)
   1468     {
   1469       if (RECORD_FULL_IS_REPLAY)
   1470 	{
   1471 	  int n;
   1472 
   1473 	  /* Let user choose if he wants to write register or not.  */
   1474 	  if (regno < 0)
   1475 	    n =
   1476 	      query (_("Because GDB is in replay mode, changing the "
   1477 		       "value of a register will make the execution "
   1478 		       "log unusable from this point onward.  "
   1479 		       "Change all registers?"));
   1480 	  else
   1481 	    n =
   1482 	      query (_("Because GDB is in replay mode, changing the value "
   1483 		       "of a register will make the execution log unusable "
   1484 		       "from this point onward.  Change register %s?"),
   1485 		      gdbarch_register_name (get_regcache_arch (regcache),
   1486 					       regno));
   1487 
   1488 	  if (!n)
   1489 	    {
   1490 	      /* Invalidate the value of regcache that was set in function
   1491 	         "regcache_raw_write".  */
   1492 	      if (regno < 0)
   1493 		{
   1494 		  int i;
   1495 
   1496 		  for (i = 0;
   1497 		       i < gdbarch_num_regs (get_regcache_arch (regcache));
   1498 		       i++)
   1499 		    regcache_invalidate (regcache, i);
   1500 		}
   1501 	      else
   1502 		regcache_invalidate (regcache, regno);
   1503 
   1504 	      error (_("Process record canceled the operation."));
   1505 	    }
   1506 
   1507 	  /* Destroy the record from here forward.  */
   1508 	  record_full_list_release_following (record_full_list);
   1509 	}
   1510 
   1511       record_full_registers_change (regcache, regno);
   1512     }
   1513   ops->beneath->to_store_registers (ops->beneath, regcache, regno);
   1514 }
   1515 
   1516 /* "to_xfer_partial" method.  Behavior is conditional on
   1517    RECORD_FULL_IS_REPLAY.
   1518    In replay mode, we cannot write memory unles we are willing to
   1519    invalidate the record/replay log from this point forward.  */
   1520 
   1521 static enum target_xfer_status
   1522 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
   1523 			  const char *annex, gdb_byte *readbuf,
   1524 			  const gdb_byte *writebuf, ULONGEST offset,
   1525 			  ULONGEST len, ULONGEST *xfered_len)
   1526 {
   1527   if (!record_full_gdb_operation_disable
   1528       && (object == TARGET_OBJECT_MEMORY
   1529 	  || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
   1530     {
   1531       if (RECORD_FULL_IS_REPLAY)
   1532 	{
   1533 	  /* Let user choose if he wants to write memory or not.  */
   1534 	  if (!query (_("Because GDB is in replay mode, writing to memory "
   1535 		        "will make the execution log unusable from this "
   1536 		        "point onward.  Write memory at address %s?"),
   1537 		       paddress (target_gdbarch (), offset)))
   1538 	    error (_("Process record canceled the operation."));
   1539 
   1540 	  /* Destroy the record from here forward.  */
   1541 	  record_full_list_release_following (record_full_list);
   1542 	}
   1543 
   1544       /* Check record_full_insn_num */
   1545       record_full_check_insn_num (0);
   1546 
   1547       /* Record registers change to list as an instruction.  */
   1548       record_full_arch_list_head = NULL;
   1549       record_full_arch_list_tail = NULL;
   1550       if (record_full_arch_list_add_mem (offset, len))
   1551 	{
   1552 	  record_full_list_release (record_full_arch_list_tail);
   1553 	  if (record_debug)
   1554 	    fprintf_unfiltered (gdb_stdlog,
   1555 				"Process record: failed to record "
   1556 				"execution log.");
   1557 	  return TARGET_XFER_E_IO;
   1558 	}
   1559       if (record_full_arch_list_add_end ())
   1560 	{
   1561 	  record_full_list_release (record_full_arch_list_tail);
   1562 	  if (record_debug)
   1563 	    fprintf_unfiltered (gdb_stdlog,
   1564 				"Process record: failed to record "
   1565 				"execution log.");
   1566 	  return TARGET_XFER_E_IO;
   1567 	}
   1568       record_full_list->next = record_full_arch_list_head;
   1569       record_full_arch_list_head->prev = record_full_list;
   1570       record_full_list = record_full_arch_list_tail;
   1571 
   1572       if (record_full_insn_num == record_full_insn_max_num)
   1573 	record_full_list_release_first ();
   1574       else
   1575 	record_full_insn_num++;
   1576     }
   1577 
   1578   return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
   1579 					readbuf, writebuf, offset,
   1580 					len, xfered_len);
   1581 }
   1582 
   1583 /* This structure represents a breakpoint inserted while the record
   1584    target is active.  We use this to know when to install/remove
   1585    breakpoints in/from the target beneath.  For example, a breakpoint
   1586    may be inserted while recording, but removed when not replaying nor
   1587    recording.  In that case, the breakpoint had not been inserted on
   1588    the target beneath, so we should not try to remove it there.  */
   1589 
   1590 struct record_full_breakpoint
   1591 {
   1592   /* The address and address space the breakpoint was set at.  */
   1593   struct address_space *address_space;
   1594   CORE_ADDR addr;
   1595 
   1596   /* True when the breakpoint has been also installed in the target
   1597      beneath.  This will be false for breakpoints set during replay or
   1598      when recording.  */
   1599   int in_target_beneath;
   1600 };
   1601 
   1602 typedef struct record_full_breakpoint *record_full_breakpoint_p;
   1603 DEF_VEC_P(record_full_breakpoint_p);
   1604 
   1605 /* The list of breakpoints inserted while the record target is
   1606    active.  */
   1607 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
   1608 
   1609 static void
   1610 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
   1611 {
   1612   if (loc->loc_type != bp_loc_software_breakpoint)
   1613       return;
   1614 
   1615   if (loc->inserted)
   1616     {
   1617       struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
   1618 
   1619       bp->addr = loc->target_info.placed_address;
   1620       bp->address_space = loc->target_info.placed_address_space;
   1621 
   1622       bp->in_target_beneath = 1;
   1623 
   1624       VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
   1625     }
   1626 }
   1627 
   1628 /* Sync existing breakpoints to record_full_breakpoints.  */
   1629 
   1630 static void
   1631 record_full_init_record_breakpoints (void)
   1632 {
   1633   VEC_free (record_full_breakpoint_p, record_full_breakpoints);
   1634 
   1635   iterate_over_bp_locations (record_full_sync_record_breakpoints);
   1636 }
   1637 
   1638 /* Behavior is conditional on RECORD_FULL_IS_REPLAY.  We will not actually
   1639    insert or remove breakpoints in the real target when replaying, nor
   1640    when recording.  */
   1641 
   1642 static int
   1643 record_full_insert_breakpoint (struct target_ops *ops,
   1644 			       struct gdbarch *gdbarch,
   1645 			       struct bp_target_info *bp_tgt)
   1646 {
   1647   struct record_full_breakpoint *bp;
   1648   int in_target_beneath = 0;
   1649 
   1650   if (!RECORD_FULL_IS_REPLAY)
   1651     {
   1652       /* When recording, we currently always single-step, so we don't
   1653 	 really need to install regular breakpoints in the inferior.
   1654 	 However, we do have to insert software single-step
   1655 	 breakpoints, in case the target can't hardware step.  To keep
   1656 	 things single, we always insert.  */
   1657       struct cleanup *old_cleanups;
   1658       int ret;
   1659 
   1660       old_cleanups = record_full_gdb_operation_disable_set ();
   1661       ret = ops->beneath->to_insert_breakpoint (ops->beneath, gdbarch, bp_tgt);
   1662       do_cleanups (old_cleanups);
   1663 
   1664       if (ret != 0)
   1665 	return ret;
   1666 
   1667       in_target_beneath = 1;
   1668     }
   1669 
   1670   bp = XNEW (struct record_full_breakpoint);
   1671   bp->addr = bp_tgt->placed_address;
   1672   bp->address_space = bp_tgt->placed_address_space;
   1673   bp->in_target_beneath = in_target_beneath;
   1674   VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
   1675   return 0;
   1676 }
   1677 
   1678 /* "to_remove_breakpoint" method for process record target.  */
   1679 
   1680 static int
   1681 record_full_remove_breakpoint (struct target_ops *ops,
   1682 			       struct gdbarch *gdbarch,
   1683 			       struct bp_target_info *bp_tgt)
   1684 {
   1685   struct record_full_breakpoint *bp;
   1686   int ix;
   1687 
   1688   for (ix = 0;
   1689        VEC_iterate (record_full_breakpoint_p,
   1690 		    record_full_breakpoints, ix, bp);
   1691        ++ix)
   1692     {
   1693       if (bp->addr == bp_tgt->placed_address
   1694 	  && bp->address_space == bp_tgt->placed_address_space)
   1695 	{
   1696 	  if (bp->in_target_beneath)
   1697 	    {
   1698 	      struct cleanup *old_cleanups;
   1699 	      int ret;
   1700 
   1701 	      old_cleanups = record_full_gdb_operation_disable_set ();
   1702 	      ret = ops->beneath->to_remove_breakpoint (ops->beneath, gdbarch,
   1703 							bp_tgt);
   1704 	      do_cleanups (old_cleanups);
   1705 
   1706 	      if (ret != 0)
   1707 		return ret;
   1708 	    }
   1709 
   1710 	  VEC_unordered_remove (record_full_breakpoint_p,
   1711 				record_full_breakpoints, ix);
   1712 	  return 0;
   1713 	}
   1714     }
   1715 
   1716   gdb_assert_not_reached ("removing unknown breakpoint");
   1717 }
   1718 
   1719 /* "to_can_execute_reverse" method for process record target.  */
   1720 
   1721 static int
   1722 record_full_can_execute_reverse (struct target_ops *self)
   1723 {
   1724   return 1;
   1725 }
   1726 
   1727 /* "to_get_bookmark" method for process record and prec over core.  */
   1728 
   1729 static gdb_byte *
   1730 record_full_get_bookmark (struct target_ops *self, const char *args,
   1731 			  int from_tty)
   1732 {
   1733   char *ret = NULL;
   1734 
   1735   /* Return stringified form of instruction count.  */
   1736   if (record_full_list && record_full_list->type == record_full_end)
   1737     ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
   1738 
   1739   if (record_debug)
   1740     {
   1741       if (ret)
   1742 	fprintf_unfiltered (gdb_stdlog,
   1743 			    "record_full_get_bookmark returns %s\n", ret);
   1744       else
   1745 	fprintf_unfiltered (gdb_stdlog,
   1746 			    "record_full_get_bookmark returns NULL\n");
   1747     }
   1748   return (gdb_byte *) ret;
   1749 }
   1750 
   1751 /* "to_goto_bookmark" method for process record and prec over core.  */
   1752 
   1753 static void
   1754 record_full_goto_bookmark (struct target_ops *self,
   1755 			   const gdb_byte *raw_bookmark, int from_tty)
   1756 {
   1757   const char *bookmark = (const char *) raw_bookmark;
   1758   struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
   1759 
   1760   if (record_debug)
   1761     fprintf_unfiltered (gdb_stdlog,
   1762 			"record_full_goto_bookmark receives %s\n", bookmark);
   1763 
   1764   if (bookmark[0] == '\'' || bookmark[0] == '\"')
   1765     {
   1766       char *copy;
   1767 
   1768       if (bookmark[strlen (bookmark) - 1] != bookmark[0])
   1769 	error (_("Unbalanced quotes: %s"), bookmark);
   1770 
   1771 
   1772       copy = savestring (bookmark + 1, strlen (bookmark) - 2);
   1773       make_cleanup (xfree, copy);
   1774       bookmark = copy;
   1775     }
   1776 
   1777   record_goto (bookmark);
   1778 
   1779   do_cleanups (cleanup);
   1780 }
   1781 
   1782 static enum exec_direction_kind
   1783 record_full_execution_direction (struct target_ops *self)
   1784 {
   1785   return record_full_execution_dir;
   1786 }
   1787 
   1788 static void
   1789 record_full_info (struct target_ops *self)
   1790 {
   1791   struct record_full_entry *p;
   1792 
   1793   if (RECORD_FULL_IS_REPLAY)
   1794     printf_filtered (_("Replay mode:\n"));
   1795   else
   1796     printf_filtered (_("Record mode:\n"));
   1797 
   1798   /* Find entry for first actual instruction in the log.  */
   1799   for (p = record_full_first.next;
   1800        p != NULL && p->type != record_full_end;
   1801        p = p->next)
   1802     ;
   1803 
   1804   /* Do we have a log at all?  */
   1805   if (p != NULL && p->type == record_full_end)
   1806     {
   1807       /* Display instruction number for first instruction in the log.  */
   1808       printf_filtered (_("Lowest recorded instruction number is %s.\n"),
   1809 		       pulongest (p->u.end.insn_num));
   1810 
   1811       /* If in replay mode, display where we are in the log.  */
   1812       if (RECORD_FULL_IS_REPLAY)
   1813 	printf_filtered (_("Current instruction number is %s.\n"),
   1814 			 pulongest (record_full_list->u.end.insn_num));
   1815 
   1816       /* Display instruction number for last instruction in the log.  */
   1817       printf_filtered (_("Highest recorded instruction number is %s.\n"),
   1818 		       pulongest (record_full_insn_count));
   1819 
   1820       /* Display log count.  */
   1821       printf_filtered (_("Log contains %u instructions.\n"),
   1822 		       record_full_insn_num);
   1823     }
   1824   else
   1825     printf_filtered (_("No instructions have been logged.\n"));
   1826 
   1827   /* Display max log size.  */
   1828   printf_filtered (_("Max logged instructions is %u.\n"),
   1829 		   record_full_insn_max_num);
   1830 }
   1831 
   1832 /* The "to_record_delete" target method.  */
   1833 
   1834 static void
   1835 record_full_delete (struct target_ops *self)
   1836 {
   1837   record_full_list_release_following (record_full_list);
   1838 }
   1839 
   1840 /* The "to_record_is_replaying" target method.  */
   1841 
   1842 static int
   1843 record_full_is_replaying (struct target_ops *self)
   1844 {
   1845   return RECORD_FULL_IS_REPLAY;
   1846 }
   1847 
   1848 /* Go to a specific entry.  */
   1849 
   1850 static void
   1851 record_full_goto_entry (struct record_full_entry *p)
   1852 {
   1853   if (p == NULL)
   1854     error (_("Target insn not found."));
   1855   else if (p == record_full_list)
   1856     error (_("Already at target insn."));
   1857   else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
   1858     {
   1859       printf_filtered (_("Go forward to insn number %s\n"),
   1860 		       pulongest (p->u.end.insn_num));
   1861       record_full_goto_insn (p, EXEC_FORWARD);
   1862     }
   1863   else
   1864     {
   1865       printf_filtered (_("Go backward to insn number %s\n"),
   1866 		       pulongest (p->u.end.insn_num));
   1867       record_full_goto_insn (p, EXEC_REVERSE);
   1868     }
   1869 
   1870   registers_changed ();
   1871   reinit_frame_cache ();
   1872   stop_pc = regcache_read_pc (get_current_regcache ());
   1873   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
   1874 }
   1875 
   1876 /* The "to_goto_record_begin" target method.  */
   1877 
   1878 static void
   1879 record_full_goto_begin (struct target_ops *self)
   1880 {
   1881   struct record_full_entry *p = NULL;
   1882 
   1883   for (p = &record_full_first; p != NULL; p = p->next)
   1884     if (p->type == record_full_end)
   1885       break;
   1886 
   1887   record_full_goto_entry (p);
   1888 }
   1889 
   1890 /* The "to_goto_record_end" target method.  */
   1891 
   1892 static void
   1893 record_full_goto_end (struct target_ops *self)
   1894 {
   1895   struct record_full_entry *p = NULL;
   1896 
   1897   for (p = record_full_list; p->next != NULL; p = p->next)
   1898     ;
   1899   for (; p!= NULL; p = p->prev)
   1900     if (p->type == record_full_end)
   1901       break;
   1902 
   1903   record_full_goto_entry (p);
   1904 }
   1905 
   1906 /* The "to_goto_record" target method.  */
   1907 
   1908 static void
   1909 record_full_goto (struct target_ops *self, ULONGEST target_insn)
   1910 {
   1911   struct record_full_entry *p = NULL;
   1912 
   1913   for (p = &record_full_first; p != NULL; p = p->next)
   1914     if (p->type == record_full_end && p->u.end.insn_num == target_insn)
   1915       break;
   1916 
   1917   record_full_goto_entry (p);
   1918 }
   1919 
   1920 static void
   1921 init_record_full_ops (void)
   1922 {
   1923   record_full_ops.to_shortname = "record-full";
   1924   record_full_ops.to_longname = "Process record and replay target";
   1925   record_full_ops.to_doc =
   1926     "Log program while executing and replay execution from log.";
   1927   record_full_ops.to_open = record_full_open;
   1928   record_full_ops.to_close = record_full_close;
   1929   record_full_ops.to_async = record_full_async;
   1930   record_full_ops.to_resume = record_full_resume;
   1931   record_full_ops.to_wait = record_full_wait;
   1932   record_full_ops.to_disconnect = record_disconnect;
   1933   record_full_ops.to_detach = record_detach;
   1934   record_full_ops.to_mourn_inferior = record_mourn_inferior;
   1935   record_full_ops.to_kill = record_kill;
   1936   record_full_ops.to_store_registers = record_full_store_registers;
   1937   record_full_ops.to_xfer_partial = record_full_xfer_partial;
   1938   record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
   1939   record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
   1940   record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
   1941   record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
   1942   record_full_ops.to_stopped_by_sw_breakpoint
   1943     = record_full_stopped_by_sw_breakpoint;
   1944   record_full_ops.to_supports_stopped_by_sw_breakpoint
   1945     = record_full_supports_stopped_by_sw_breakpoint;
   1946   record_full_ops.to_stopped_by_hw_breakpoint
   1947     = record_full_stopped_by_hw_breakpoint;
   1948   record_full_ops.to_supports_stopped_by_hw_breakpoint
   1949     = record_full_supports_stopped_by_hw_breakpoint;
   1950   record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
   1951   record_full_ops.to_stratum = record_stratum;
   1952   /* Add bookmark target methods.  */
   1953   record_full_ops.to_get_bookmark = record_full_get_bookmark;
   1954   record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
   1955   record_full_ops.to_execution_direction = record_full_execution_direction;
   1956   record_full_ops.to_info_record = record_full_info;
   1957   record_full_ops.to_save_record = record_full_save;
   1958   record_full_ops.to_delete_record = record_full_delete;
   1959   record_full_ops.to_record_is_replaying = record_full_is_replaying;
   1960   record_full_ops.to_goto_record_begin = record_full_goto_begin;
   1961   record_full_ops.to_goto_record_end = record_full_goto_end;
   1962   record_full_ops.to_goto_record = record_full_goto;
   1963   record_full_ops.to_magic = OPS_MAGIC;
   1964 }
   1965 
   1966 /* "to_resume" method for prec over corefile.  */
   1967 
   1968 static void
   1969 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
   1970 			 enum gdb_signal signal)
   1971 {
   1972   record_full_resume_step = step;
   1973   record_full_resumed = 1;
   1974   record_full_execution_dir = execution_direction;
   1975 
   1976   /* We are about to start executing the inferior (or simulate it),
   1977      let's register it with the event loop.  */
   1978   if (target_can_async_p ())
   1979     target_async (1);
   1980 }
   1981 
   1982 /* "to_kill" method for prec over corefile.  */
   1983 
   1984 static void
   1985 record_full_core_kill (struct target_ops *ops)
   1986 {
   1987   if (record_debug)
   1988     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
   1989 
   1990   unpush_target (&record_full_core_ops);
   1991 }
   1992 
   1993 /* "to_fetch_registers" method for prec over corefile.  */
   1994 
   1995 static void
   1996 record_full_core_fetch_registers (struct target_ops *ops,
   1997 				  struct regcache *regcache,
   1998 				  int regno)
   1999 {
   2000   if (regno < 0)
   2001     {
   2002       int num = gdbarch_num_regs (get_regcache_arch (regcache));
   2003       int i;
   2004 
   2005       for (i = 0; i < num; i ++)
   2006         regcache_raw_supply (regcache, i,
   2007                              record_full_core_regbuf + MAX_REGISTER_SIZE * i);
   2008     }
   2009   else
   2010     regcache_raw_supply (regcache, regno,
   2011                          record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
   2012 }
   2013 
   2014 /* "to_prepare_to_store" method for prec over corefile.  */
   2015 
   2016 static void
   2017 record_full_core_prepare_to_store (struct target_ops *self,
   2018 				   struct regcache *regcache)
   2019 {
   2020 }
   2021 
   2022 /* "to_store_registers" method for prec over corefile.  */
   2023 
   2024 static void
   2025 record_full_core_store_registers (struct target_ops *ops,
   2026                              struct regcache *regcache,
   2027                              int regno)
   2028 {
   2029   if (record_full_gdb_operation_disable)
   2030     regcache_raw_collect (regcache, regno,
   2031                           record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
   2032   else
   2033     error (_("You can't do that without a process to debug."));
   2034 }
   2035 
   2036 /* "to_xfer_partial" method for prec over corefile.  */
   2037 
   2038 static enum target_xfer_status
   2039 record_full_core_xfer_partial (struct target_ops *ops,
   2040 			       enum target_object object,
   2041 			       const char *annex, gdb_byte *readbuf,
   2042 			       const gdb_byte *writebuf, ULONGEST offset,
   2043 			       ULONGEST len, ULONGEST *xfered_len)
   2044 {
   2045   if (object == TARGET_OBJECT_MEMORY)
   2046     {
   2047       if (record_full_gdb_operation_disable || !writebuf)
   2048 	{
   2049 	  struct target_section *p;
   2050 
   2051 	  for (p = record_full_core_start; p < record_full_core_end; p++)
   2052 	    {
   2053 	      if (offset >= p->addr)
   2054 		{
   2055 		  struct record_full_core_buf_entry *entry;
   2056 		  ULONGEST sec_offset;
   2057 
   2058 		  if (offset >= p->endaddr)
   2059 		    continue;
   2060 
   2061 		  if (offset + len > p->endaddr)
   2062 		    len = p->endaddr - offset;
   2063 
   2064 		  sec_offset = offset - p->addr;
   2065 
   2066 		  /* Read readbuf or write writebuf p, offset, len.  */
   2067 		  /* Check flags.  */
   2068 		  if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
   2069 		      || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
   2070 		    {
   2071 		      if (readbuf)
   2072 			memset (readbuf, 0, len);
   2073 
   2074 		      *xfered_len = len;
   2075 		      return TARGET_XFER_OK;
   2076 		    }
   2077 		  /* Get record_full_core_buf_entry.  */
   2078 		  for (entry = record_full_core_buf_list; entry;
   2079 		       entry = entry->prev)
   2080 		    if (entry->p == p)
   2081 		      break;
   2082 		  if (writebuf)
   2083 		    {
   2084 		      if (!entry)
   2085 			{
   2086 			  /* Add a new entry.  */
   2087 			  entry = (struct record_full_core_buf_entry *)
   2088 			    xmalloc
   2089 			    (sizeof (struct record_full_core_buf_entry));
   2090 			  entry->p = p;
   2091 			  if (!bfd_malloc_and_get_section
   2092 			        (p->the_bfd_section->owner,
   2093 				 p->the_bfd_section,
   2094 				 &entry->buf))
   2095 			    {
   2096 			      xfree (entry);
   2097 			      return TARGET_XFER_EOF;
   2098 			    }
   2099 			  entry->prev = record_full_core_buf_list;
   2100 			  record_full_core_buf_list = entry;
   2101 			}
   2102 
   2103 		      memcpy (entry->buf + sec_offset, writebuf,
   2104 			      (size_t) len);
   2105 		    }
   2106 		  else
   2107 		    {
   2108 		      if (!entry)
   2109 			return ops->beneath->to_xfer_partial (ops->beneath,
   2110 							      object, annex,
   2111 							      readbuf, writebuf,
   2112 							      offset, len,
   2113 							      xfered_len);
   2114 
   2115 		      memcpy (readbuf, entry->buf + sec_offset,
   2116 			      (size_t) len);
   2117 		    }
   2118 
   2119 		  *xfered_len = len;
   2120 		  return TARGET_XFER_OK;
   2121 		}
   2122 	    }
   2123 
   2124 	  return TARGET_XFER_E_IO;
   2125 	}
   2126       else
   2127 	error (_("You can't do that without a process to debug."));
   2128     }
   2129 
   2130   return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
   2131 					readbuf, writebuf, offset, len,
   2132 					xfered_len);
   2133 }
   2134 
   2135 /* "to_insert_breakpoint" method for prec over corefile.  */
   2136 
   2137 static int
   2138 record_full_core_insert_breakpoint (struct target_ops *ops,
   2139 				    struct gdbarch *gdbarch,
   2140 				    struct bp_target_info *bp_tgt)
   2141 {
   2142   return 0;
   2143 }
   2144 
   2145 /* "to_remove_breakpoint" method for prec over corefile.  */
   2146 
   2147 static int
   2148 record_full_core_remove_breakpoint (struct target_ops *ops,
   2149 				    struct gdbarch *gdbarch,
   2150 				    struct bp_target_info *bp_tgt)
   2151 {
   2152   return 0;
   2153 }
   2154 
   2155 /* "to_has_execution" method for prec over corefile.  */
   2156 
   2157 static int
   2158 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
   2159 {
   2160   return 1;
   2161 }
   2162 
   2163 static void
   2164 init_record_full_core_ops (void)
   2165 {
   2166   record_full_core_ops.to_shortname = "record-core";
   2167   record_full_core_ops.to_longname = "Process record and replay target";
   2168   record_full_core_ops.to_doc =
   2169     "Log program while executing and replay execution from log.";
   2170   record_full_core_ops.to_open = record_full_open;
   2171   record_full_core_ops.to_close = record_full_close;
   2172   record_full_core_ops.to_async = record_full_async;
   2173   record_full_core_ops.to_resume = record_full_core_resume;
   2174   record_full_core_ops.to_wait = record_full_wait;
   2175   record_full_core_ops.to_kill = record_full_core_kill;
   2176   record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
   2177   record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
   2178   record_full_core_ops.to_store_registers = record_full_core_store_registers;
   2179   record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
   2180   record_full_core_ops.to_insert_breakpoint
   2181     = record_full_core_insert_breakpoint;
   2182   record_full_core_ops.to_remove_breakpoint
   2183     = record_full_core_remove_breakpoint;
   2184   record_full_core_ops.to_stopped_by_watchpoint
   2185     = record_full_stopped_by_watchpoint;
   2186   record_full_core_ops.to_stopped_data_address
   2187     = record_full_stopped_data_address;
   2188   record_full_core_ops.to_stopped_by_sw_breakpoint
   2189     = record_full_stopped_by_sw_breakpoint;
   2190   record_full_core_ops.to_supports_stopped_by_sw_breakpoint
   2191     = record_full_supports_stopped_by_sw_breakpoint;
   2192   record_full_core_ops.to_stopped_by_hw_breakpoint
   2193     = record_full_stopped_by_hw_breakpoint;
   2194   record_full_core_ops.to_supports_stopped_by_hw_breakpoint
   2195     = record_full_supports_stopped_by_hw_breakpoint;
   2196   record_full_core_ops.to_can_execute_reverse
   2197     = record_full_can_execute_reverse;
   2198   record_full_core_ops.to_has_execution = record_full_core_has_execution;
   2199   record_full_core_ops.to_stratum = record_stratum;
   2200   /* Add bookmark target methods.  */
   2201   record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
   2202   record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
   2203   record_full_core_ops.to_execution_direction
   2204     = record_full_execution_direction;
   2205   record_full_core_ops.to_info_record = record_full_info;
   2206   record_full_core_ops.to_delete_record = record_full_delete;
   2207   record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
   2208   record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
   2209   record_full_core_ops.to_goto_record_end = record_full_goto_end;
   2210   record_full_core_ops.to_goto_record = record_full_goto;
   2211   record_full_core_ops.to_magic = OPS_MAGIC;
   2212 }
   2213 
   2214 /* Record log save-file format
   2215    Version 1 (never released)
   2216 
   2217    Header:
   2218      4 bytes: magic number htonl(0x20090829).
   2219        NOTE: be sure to change whenever this file format changes!
   2220 
   2221    Records:
   2222      record_full_end:
   2223        1 byte:  record type (record_full_end, see enum record_full_type).
   2224      record_full_reg:
   2225        1 byte:  record type (record_full_reg, see enum record_full_type).
   2226        8 bytes: register id (network byte order).
   2227        MAX_REGISTER_SIZE bytes: register value.
   2228      record_full_mem:
   2229        1 byte:  record type (record_full_mem, see enum record_full_type).
   2230        8 bytes: memory length (network byte order).
   2231        8 bytes: memory address (network byte order).
   2232        n bytes: memory value (n == memory length).
   2233 
   2234    Version 2
   2235      4 bytes: magic number netorder32(0x20091016).
   2236        NOTE: be sure to change whenever this file format changes!
   2237 
   2238    Records:
   2239      record_full_end:
   2240        1 byte:  record type (record_full_end, see enum record_full_type).
   2241        4 bytes: signal
   2242        4 bytes: instruction count
   2243      record_full_reg:
   2244        1 byte:  record type (record_full_reg, see enum record_full_type).
   2245        4 bytes: register id (network byte order).
   2246        n bytes: register value (n == actual register size).
   2247                 (eg. 4 bytes for x86 general registers).
   2248      record_full_mem:
   2249        1 byte:  record type (record_full_mem, see enum record_full_type).
   2250        4 bytes: memory length (network byte order).
   2251        8 bytes: memory address (network byte order).
   2252        n bytes: memory value (n == memory length).
   2253 
   2254 */
   2255 
   2256 /* bfdcore_read -- read bytes from a core file section.  */
   2257 
   2258 static inline void
   2259 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
   2260 {
   2261   int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
   2262 
   2263   if (ret)
   2264     *offset += len;
   2265   else
   2266     error (_("Failed to read %d bytes from core file %s ('%s')."),
   2267 	   len, bfd_get_filename (obfd),
   2268 	   bfd_errmsg (bfd_get_error ()));
   2269 }
   2270 
   2271 static inline uint64_t
   2272 netorder64 (uint64_t input)
   2273 {
   2274   uint64_t ret;
   2275 
   2276   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
   2277 			  BFD_ENDIAN_BIG, input);
   2278   return ret;
   2279 }
   2280 
   2281 static inline uint32_t
   2282 netorder32 (uint32_t input)
   2283 {
   2284   uint32_t ret;
   2285 
   2286   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
   2287 			  BFD_ENDIAN_BIG, input);
   2288   return ret;
   2289 }
   2290 
   2291 static inline uint16_t
   2292 netorder16 (uint16_t input)
   2293 {
   2294   uint16_t ret;
   2295 
   2296   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
   2297 			  BFD_ENDIAN_BIG, input);
   2298   return ret;
   2299 }
   2300 
   2301 /* Restore the execution log from a core_bfd file.  */
   2302 static void
   2303 record_full_restore (void)
   2304 {
   2305   uint32_t magic;
   2306   struct cleanup *old_cleanups;
   2307   struct record_full_entry *rec;
   2308   asection *osec;
   2309   uint32_t osec_size;
   2310   int bfd_offset = 0;
   2311   struct regcache *regcache;
   2312 
   2313   /* We restore the execution log from the open core bfd,
   2314      if there is one.  */
   2315   if (core_bfd == NULL)
   2316     return;
   2317 
   2318   /* "record_full_restore" can only be called when record list is empty.  */
   2319   gdb_assert (record_full_first.next == NULL);
   2320 
   2321   if (record_debug)
   2322     fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
   2323 
   2324   /* Now need to find our special note section.  */
   2325   osec = bfd_get_section_by_name (core_bfd, "null0");
   2326   if (record_debug)
   2327     fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
   2328 			osec ? "succeeded" : "failed");
   2329   if (osec == NULL)
   2330     return;
   2331   osec_size = bfd_section_size (core_bfd, osec);
   2332   if (record_debug)
   2333     fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
   2334 
   2335   /* Check the magic code.  */
   2336   bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
   2337   if (magic != RECORD_FULL_FILE_MAGIC)
   2338     error (_("Version mis-match or file format error in core file %s."),
   2339 	   bfd_get_filename (core_bfd));
   2340   if (record_debug)
   2341     fprintf_unfiltered (gdb_stdlog,
   2342 			"  Reading 4-byte magic cookie "
   2343 			"RECORD_FULL_FILE_MAGIC (0x%s)\n",
   2344 			phex_nz (netorder32 (magic), 4));
   2345 
   2346   /* Restore the entries in recfd into record_full_arch_list_head and
   2347      record_full_arch_list_tail.  */
   2348   record_full_arch_list_head = NULL;
   2349   record_full_arch_list_tail = NULL;
   2350   record_full_insn_num = 0;
   2351   old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
   2352   regcache = get_current_regcache ();
   2353 
   2354   while (1)
   2355     {
   2356       uint8_t rectype;
   2357       uint32_t regnum, len, signal, count;
   2358       uint64_t addr;
   2359 
   2360       /* We are finished when offset reaches osec_size.  */
   2361       if (bfd_offset >= osec_size)
   2362 	break;
   2363       bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
   2364 
   2365       switch (rectype)
   2366         {
   2367         case record_full_reg: /* reg */
   2368           /* Get register number to regnum.  */
   2369           bfdcore_read (core_bfd, osec, &regnum,
   2370 			sizeof (regnum), &bfd_offset);
   2371 	  regnum = netorder32 (regnum);
   2372 
   2373           rec = record_full_reg_alloc (regcache, regnum);
   2374 
   2375           /* Get val.  */
   2376           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
   2377 			rec->u.reg.len, &bfd_offset);
   2378 
   2379 	  if (record_debug)
   2380 	    fprintf_unfiltered (gdb_stdlog,
   2381 				"  Reading register %d (1 "
   2382 				"plus %lu plus %d bytes)\n",
   2383 				rec->u.reg.num,
   2384 				(unsigned long) sizeof (regnum),
   2385 				rec->u.reg.len);
   2386           break;
   2387 
   2388         case record_full_mem: /* mem */
   2389           /* Get len.  */
   2390           bfdcore_read (core_bfd, osec, &len,
   2391 			sizeof (len), &bfd_offset);
   2392 	  len = netorder32 (len);
   2393 
   2394           /* Get addr.  */
   2395           bfdcore_read (core_bfd, osec, &addr,
   2396 			sizeof (addr), &bfd_offset);
   2397 	  addr = netorder64 (addr);
   2398 
   2399           rec = record_full_mem_alloc (addr, len);
   2400 
   2401           /* Get val.  */
   2402           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
   2403 			rec->u.mem.len, &bfd_offset);
   2404 
   2405 	  if (record_debug)
   2406 	    fprintf_unfiltered (gdb_stdlog,
   2407 				"  Reading memory %s (1 plus "
   2408 				"%lu plus %lu plus %d bytes)\n",
   2409 				paddress (get_current_arch (),
   2410 					  rec->u.mem.addr),
   2411 				(unsigned long) sizeof (addr),
   2412 				(unsigned long) sizeof (len),
   2413 				rec->u.mem.len);
   2414           break;
   2415 
   2416         case record_full_end: /* end */
   2417           rec = record_full_end_alloc ();
   2418           record_full_insn_num ++;
   2419 
   2420 	  /* Get signal value.  */
   2421 	  bfdcore_read (core_bfd, osec, &signal,
   2422 			sizeof (signal), &bfd_offset);
   2423 	  signal = netorder32 (signal);
   2424 	  rec->u.end.sigval = signal;
   2425 
   2426 	  /* Get insn count.  */
   2427 	  bfdcore_read (core_bfd, osec, &count,
   2428 			sizeof (count), &bfd_offset);
   2429 	  count = netorder32 (count);
   2430 	  rec->u.end.insn_num = count;
   2431 	  record_full_insn_count = count + 1;
   2432 	  if (record_debug)
   2433 	    fprintf_unfiltered (gdb_stdlog,
   2434 				"  Reading record_full_end (1 + "
   2435 				"%lu + %lu bytes), offset == %s\n",
   2436 				(unsigned long) sizeof (signal),
   2437 				(unsigned long) sizeof (count),
   2438 				paddress (get_current_arch (),
   2439 					  bfd_offset));
   2440           break;
   2441 
   2442         default:
   2443           error (_("Bad entry type in core file %s."),
   2444 		 bfd_get_filename (core_bfd));
   2445           break;
   2446         }
   2447 
   2448       /* Add rec to record arch list.  */
   2449       record_full_arch_list_add (rec);
   2450     }
   2451 
   2452   discard_cleanups (old_cleanups);
   2453 
   2454   /* Add record_full_arch_list_head to the end of record list.  */
   2455   record_full_first.next = record_full_arch_list_head;
   2456   record_full_arch_list_head->prev = &record_full_first;
   2457   record_full_arch_list_tail->next = NULL;
   2458   record_full_list = &record_full_first;
   2459 
   2460   /* Update record_full_insn_max_num.  */
   2461   if (record_full_insn_num > record_full_insn_max_num)
   2462     {
   2463       record_full_insn_max_num = record_full_insn_num;
   2464       warning (_("Auto increase record/replay buffer limit to %u."),
   2465                record_full_insn_max_num);
   2466     }
   2467 
   2468   /* Succeeded.  */
   2469   printf_filtered (_("Restored records from core file %s.\n"),
   2470 		   bfd_get_filename (core_bfd));
   2471 
   2472   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
   2473 }
   2474 
   2475 /* bfdcore_write -- write bytes into a core file section.  */
   2476 
   2477 static inline void
   2478 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
   2479 {
   2480   int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
   2481 
   2482   if (ret)
   2483     *offset += len;
   2484   else
   2485     error (_("Failed to write %d bytes to core file %s ('%s')."),
   2486 	   len, bfd_get_filename (obfd),
   2487 	   bfd_errmsg (bfd_get_error ()));
   2488 }
   2489 
   2490 /* Restore the execution log from a file.  We use a modified elf
   2491    corefile format, with an extra section for our data.  */
   2492 
   2493 static void
   2494 cmd_record_full_restore (char *args, int from_tty)
   2495 {
   2496   core_file_command (args, from_tty);
   2497   record_full_open (args, from_tty);
   2498 }
   2499 
   2500 static void
   2501 record_full_save_cleanups (void *data)
   2502 {
   2503   bfd *obfd = data;
   2504   char *pathname = xstrdup (bfd_get_filename (obfd));
   2505 
   2506   gdb_bfd_unref (obfd);
   2507   unlink (pathname);
   2508   xfree (pathname);
   2509 }
   2510 
   2511 /* Save the execution log to a file.  We use a modified elf corefile
   2512    format, with an extra section for our data.  */
   2513 
   2514 static void
   2515 record_full_save (struct target_ops *self, const char *recfilename)
   2516 {
   2517   struct record_full_entry *cur_record_full_list;
   2518   uint32_t magic;
   2519   struct regcache *regcache;
   2520   struct gdbarch *gdbarch;
   2521   struct cleanup *old_cleanups;
   2522   struct cleanup *set_cleanups;
   2523   bfd *obfd;
   2524   int save_size = 0;
   2525   asection *osec = NULL;
   2526   int bfd_offset = 0;
   2527 
   2528   /* Open the save file.  */
   2529   if (record_debug)
   2530     fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
   2531 			recfilename);
   2532 
   2533   /* Open the output file.  */
   2534   obfd = create_gcore_bfd (recfilename);
   2535   old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
   2536 
   2537   /* Save the current record entry to "cur_record_full_list".  */
   2538   cur_record_full_list = record_full_list;
   2539 
   2540   /* Get the values of regcache and gdbarch.  */
   2541   regcache = get_current_regcache ();
   2542   gdbarch = get_regcache_arch (regcache);
   2543 
   2544   /* Disable the GDB operation record.  */
   2545   set_cleanups = record_full_gdb_operation_disable_set ();
   2546 
   2547   /* Reverse execute to the begin of record list.  */
   2548   while (1)
   2549     {
   2550       /* Check for beginning and end of log.  */
   2551       if (record_full_list == &record_full_first)
   2552         break;
   2553 
   2554       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2555 
   2556       if (record_full_list->prev)
   2557         record_full_list = record_full_list->prev;
   2558     }
   2559 
   2560   /* Compute the size needed for the extra bfd section.  */
   2561   save_size = 4;	/* magic cookie */
   2562   for (record_full_list = record_full_first.next; record_full_list;
   2563        record_full_list = record_full_list->next)
   2564     switch (record_full_list->type)
   2565       {
   2566       case record_full_end:
   2567 	save_size += 1 + 4 + 4;
   2568 	break;
   2569       case record_full_reg:
   2570 	save_size += 1 + 4 + record_full_list->u.reg.len;
   2571 	break;
   2572       case record_full_mem:
   2573 	save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
   2574 	break;
   2575       }
   2576 
   2577   /* Make the new bfd section.  */
   2578   osec = bfd_make_section_anyway_with_flags (obfd, "precord",
   2579                                              SEC_HAS_CONTENTS
   2580                                              | SEC_READONLY);
   2581   if (osec == NULL)
   2582     error (_("Failed to create 'precord' section for corefile %s: %s"),
   2583 	   recfilename,
   2584            bfd_errmsg (bfd_get_error ()));
   2585   bfd_set_section_size (obfd, osec, save_size);
   2586   bfd_set_section_vma (obfd, osec, 0);
   2587   bfd_set_section_alignment (obfd, osec, 0);
   2588   bfd_section_lma (obfd, osec) = 0;
   2589 
   2590   /* Save corefile state.  */
   2591   write_gcore_file (obfd);
   2592 
   2593   /* Write out the record log.  */
   2594   /* Write the magic code.  */
   2595   magic = RECORD_FULL_FILE_MAGIC;
   2596   if (record_debug)
   2597     fprintf_unfiltered (gdb_stdlog,
   2598 			"  Writing 4-byte magic cookie "
   2599 			"RECORD_FULL_FILE_MAGIC (0x%s)\n",
   2600 		      phex_nz (magic, 4));
   2601   bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
   2602 
   2603   /* Save the entries to recfd and forward execute to the end of
   2604      record list.  */
   2605   record_full_list = &record_full_first;
   2606   while (1)
   2607     {
   2608       /* Save entry.  */
   2609       if (record_full_list != &record_full_first)
   2610         {
   2611 	  uint8_t type;
   2612 	  uint32_t regnum, len, signal, count;
   2613           uint64_t addr;
   2614 
   2615 	  type = record_full_list->type;
   2616           bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
   2617 
   2618           switch (record_full_list->type)
   2619             {
   2620             case record_full_reg: /* reg */
   2621 	      if (record_debug)
   2622 		fprintf_unfiltered (gdb_stdlog,
   2623 				    "  Writing register %d (1 "
   2624 				    "plus %lu plus %d bytes)\n",
   2625 				    record_full_list->u.reg.num,
   2626 				    (unsigned long) sizeof (regnum),
   2627 				    record_full_list->u.reg.len);
   2628 
   2629               /* Write regnum.  */
   2630               regnum = netorder32 (record_full_list->u.reg.num);
   2631               bfdcore_write (obfd, osec, &regnum,
   2632 			     sizeof (regnum), &bfd_offset);
   2633 
   2634               /* Write regval.  */
   2635               bfdcore_write (obfd, osec,
   2636 			     record_full_get_loc (record_full_list),
   2637 			     record_full_list->u.reg.len, &bfd_offset);
   2638               break;
   2639 
   2640             case record_full_mem: /* mem */
   2641 	      if (record_debug)
   2642 		fprintf_unfiltered (gdb_stdlog,
   2643 				    "  Writing memory %s (1 plus "
   2644 				    "%lu plus %lu plus %d bytes)\n",
   2645 				    paddress (gdbarch,
   2646 					      record_full_list->u.mem.addr),
   2647 				    (unsigned long) sizeof (addr),
   2648 				    (unsigned long) sizeof (len),
   2649 				    record_full_list->u.mem.len);
   2650 
   2651 	      /* Write memlen.  */
   2652 	      len = netorder32 (record_full_list->u.mem.len);
   2653 	      bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
   2654 
   2655 	      /* Write memaddr.  */
   2656 	      addr = netorder64 (record_full_list->u.mem.addr);
   2657 	      bfdcore_write (obfd, osec, &addr,
   2658 			     sizeof (addr), &bfd_offset);
   2659 
   2660 	      /* Write memval.  */
   2661 	      bfdcore_write (obfd, osec,
   2662 			     record_full_get_loc (record_full_list),
   2663 			     record_full_list->u.mem.len, &bfd_offset);
   2664               break;
   2665 
   2666               case record_full_end:
   2667 		if (record_debug)
   2668 		  fprintf_unfiltered (gdb_stdlog,
   2669 				      "  Writing record_full_end (1 + "
   2670 				      "%lu + %lu bytes)\n",
   2671 				      (unsigned long) sizeof (signal),
   2672 				      (unsigned long) sizeof (count));
   2673 		/* Write signal value.  */
   2674 		signal = netorder32 (record_full_list->u.end.sigval);
   2675 		bfdcore_write (obfd, osec, &signal,
   2676 			       sizeof (signal), &bfd_offset);
   2677 
   2678 		/* Write insn count.  */
   2679 		count = netorder32 (record_full_list->u.end.insn_num);
   2680 		bfdcore_write (obfd, osec, &count,
   2681 			       sizeof (count), &bfd_offset);
   2682                 break;
   2683             }
   2684         }
   2685 
   2686       /* Execute entry.  */
   2687       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2688 
   2689       if (record_full_list->next)
   2690         record_full_list = record_full_list->next;
   2691       else
   2692         break;
   2693     }
   2694 
   2695   /* Reverse execute to cur_record_full_list.  */
   2696   while (1)
   2697     {
   2698       /* Check for beginning and end of log.  */
   2699       if (record_full_list == cur_record_full_list)
   2700         break;
   2701 
   2702       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2703 
   2704       if (record_full_list->prev)
   2705         record_full_list = record_full_list->prev;
   2706     }
   2707 
   2708   do_cleanups (set_cleanups);
   2709   gdb_bfd_unref (obfd);
   2710   discard_cleanups (old_cleanups);
   2711 
   2712   /* Succeeded.  */
   2713   printf_filtered (_("Saved core file %s with execution log.\n"),
   2714 		   recfilename);
   2715 }
   2716 
   2717 /* record_full_goto_insn -- rewind the record log (forward or backward,
   2718    depending on DIR) to the given entry, changing the program state
   2719    correspondingly.  */
   2720 
   2721 static void
   2722 record_full_goto_insn (struct record_full_entry *entry,
   2723 		       enum exec_direction_kind dir)
   2724 {
   2725   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
   2726   struct regcache *regcache = get_current_regcache ();
   2727   struct gdbarch *gdbarch = get_regcache_arch (regcache);
   2728 
   2729   /* Assume everything is valid: we will hit the entry,
   2730      and we will not hit the end of the recording.  */
   2731 
   2732   if (dir == EXEC_FORWARD)
   2733     record_full_list = record_full_list->next;
   2734 
   2735   do
   2736     {
   2737       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2738       if (dir == EXEC_REVERSE)
   2739 	record_full_list = record_full_list->prev;
   2740       else
   2741 	record_full_list = record_full_list->next;
   2742     } while (record_full_list != entry);
   2743   do_cleanups (set_cleanups);
   2744 }
   2745 
   2746 /* Alias for "target record-full".  */
   2747 
   2748 static void
   2749 cmd_record_full_start (char *args, int from_tty)
   2750 {
   2751   execute_command ("target record-full", from_tty);
   2752 }
   2753 
   2754 static void
   2755 set_record_full_insn_max_num (char *args, int from_tty,
   2756 			      struct cmd_list_element *c)
   2757 {
   2758   if (record_full_insn_num > record_full_insn_max_num)
   2759     {
   2760       /* Count down record_full_insn_num while releasing records from list.  */
   2761       while (record_full_insn_num > record_full_insn_max_num)
   2762        {
   2763          record_full_list_release_first ();
   2764          record_full_insn_num--;
   2765        }
   2766     }
   2767 }
   2768 
   2769 /* The "set record full" command.  */
   2770 
   2771 static void
   2772 set_record_full_command (char *args, int from_tty)
   2773 {
   2774   printf_unfiltered (_("\"set record full\" must be followed "
   2775 		       "by an apporpriate subcommand.\n"));
   2776   help_list (set_record_full_cmdlist, "set record full ", all_commands,
   2777 	     gdb_stdout);
   2778 }
   2779 
   2780 /* The "show record full" command.  */
   2781 
   2782 static void
   2783 show_record_full_command (char *args, int from_tty)
   2784 {
   2785   cmd_show_list (show_record_full_cmdlist, from_tty, "");
   2786 }
   2787 
   2788 /* Provide a prototype to silence -Wmissing-prototypes.  */
   2789 extern initialize_file_ftype _initialize_record_full;
   2790 
   2791 void
   2792 _initialize_record_full (void)
   2793 {
   2794   struct cmd_list_element *c;
   2795 
   2796   /* Init record_full_first.  */
   2797   record_full_first.prev = NULL;
   2798   record_full_first.next = NULL;
   2799   record_full_first.type = record_full_end;
   2800 
   2801   init_record_full_ops ();
   2802   add_target (&record_full_ops);
   2803   add_deprecated_target_alias (&record_full_ops, "record");
   2804   init_record_full_core_ops ();
   2805   add_target (&record_full_core_ops);
   2806 
   2807   add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
   2808 		  _("Start full execution recording."), &record_full_cmdlist,
   2809 		  "record full ", 0, &record_cmdlist);
   2810 
   2811   c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
   2812 	       _("Restore the execution log from a file.\n\
   2813 Argument is filename.  File must be created with 'record save'."),
   2814 	       &record_full_cmdlist);
   2815   set_cmd_completer (c, filename_completer);
   2816 
   2817   /* Deprecate the old version without "full" prefix.  */
   2818   c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
   2819 		     &record_cmdlist);
   2820   set_cmd_completer (c, filename_completer);
   2821   deprecate_cmd (c, "record full restore");
   2822 
   2823   add_prefix_cmd ("full", class_support, set_record_full_command,
   2824 		  _("Set record options"), &set_record_full_cmdlist,
   2825 		  "set record full ", 0, &set_record_cmdlist);
   2826 
   2827   add_prefix_cmd ("full", class_support, show_record_full_command,
   2828 		  _("Show record options"), &show_record_full_cmdlist,
   2829 		  "show record full ", 0, &show_record_cmdlist);
   2830 
   2831   /* Record instructions number limit command.  */
   2832   add_setshow_boolean_cmd ("stop-at-limit", no_class,
   2833 			   &record_full_stop_at_limit, _("\
   2834 Set whether record/replay stops when record/replay buffer becomes full."), _("\
   2835 Show whether record/replay stops when record/replay buffer becomes full."),
   2836 			   _("Default is ON.\n\
   2837 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
   2838 When OFF, if the record/replay buffer becomes full,\n\
   2839 delete the oldest recorded instruction to make room for each new one."),
   2840 			   NULL, NULL,
   2841 			   &set_record_full_cmdlist, &show_record_full_cmdlist);
   2842 
   2843   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
   2844 		     &set_record_cmdlist);
   2845   deprecate_cmd (c, "set record full stop-at-limit");
   2846 
   2847   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
   2848 		     &show_record_cmdlist);
   2849   deprecate_cmd (c, "show record full stop-at-limit");
   2850 
   2851   add_setshow_uinteger_cmd ("insn-number-max", no_class,
   2852 			    &record_full_insn_max_num,
   2853 			    _("Set record/replay buffer limit."),
   2854 			    _("Show record/replay buffer limit."), _("\
   2855 Set the maximum number of instructions to be stored in the\n\
   2856 record/replay buffer.  A value of either \"unlimited\" or zero means no\n\
   2857 limit.  Default is 200000."),
   2858 			    set_record_full_insn_max_num,
   2859 			    NULL, &set_record_full_cmdlist,
   2860 			    &show_record_full_cmdlist);
   2861 
   2862   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
   2863 		     &set_record_cmdlist);
   2864   deprecate_cmd (c, "set record full insn-number-max");
   2865 
   2866   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
   2867 		     &show_record_cmdlist);
   2868   deprecate_cmd (c, "show record full insn-number-max");
   2869 
   2870   add_setshow_boolean_cmd ("memory-query", no_class,
   2871 			   &record_full_memory_query, _("\
   2872 Set whether query if PREC cannot record memory change of next instruction."),
   2873                            _("\
   2874 Show whether query if PREC cannot record memory change of next instruction."),
   2875                            _("\
   2876 Default is OFF.\n\
   2877 When ON, query if PREC cannot record memory change of next instruction."),
   2878 			   NULL, NULL,
   2879 			   &set_record_full_cmdlist,
   2880 			   &show_record_full_cmdlist);
   2881 
   2882   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
   2883 		     &set_record_cmdlist);
   2884   deprecate_cmd (c, "set record full memory-query");
   2885 
   2886   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
   2887 		     &show_record_cmdlist);
   2888   deprecate_cmd (c, "show record full memory-query");
   2889 }
   2890