Home | History | Annotate | Line # | Download | only in gdb
record-full.c revision 1.1.1.4
      1 /* Process record and replay target for GDB, the GNU debugger.
      2 
      3    Copyright (C) 2013-2016 Free Software Foundation, Inc.
      4 
      5    This file is part of GDB.
      6 
      7    This program is free software; you can redistribute it and/or modify
      8    it under the terms of the GNU General Public License as published by
      9    the Free Software Foundation; either version 3 of the License, or
     10    (at your option) any later version.
     11 
     12    This program is distributed in the hope that it will be useful,
     13    but WITHOUT ANY WARRANTY; without even the implied warranty of
     14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     15    GNU General Public License for more details.
     16 
     17    You should have received a copy of the GNU General Public License
     18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
     19 
     20 #include "defs.h"
     21 #include "gdbcmd.h"
     22 #include "regcache.h"
     23 #include "gdbthread.h"
     24 #include "event-top.h"
     25 #include "completer.h"
     26 #include "arch-utils.h"
     27 #include "gdbcore.h"
     28 #include "exec.h"
     29 #include "record.h"
     30 #include "record-full.h"
     31 #include "elf-bfd.h"
     32 #include "gcore.h"
     33 #include "event-loop.h"
     34 #include "inf-loop.h"
     35 #include "gdb_bfd.h"
     36 #include "observer.h"
     37 #include "infrun.h"
     38 
     39 #include <signal.h>
     40 
     41 /* This module implements "target record-full", also known as "process
     42    record and replay".  This target sits on top of a "normal" target
     43    (a target that "has execution"), and provides a record and replay
     44    functionality, including reverse debugging.
     45 
     46    Target record has two modes: recording, and replaying.
     47 
     48    In record mode, we intercept the to_resume and to_wait methods.
     49    Whenever gdb resumes the target, we run the target in single step
     50    mode, and we build up an execution log in which, for each executed
     51    instruction, we record all changes in memory and register state.
     52    This is invisible to the user, to whom it just looks like an
     53    ordinary debugging session (except for performance degredation).
     54 
     55    In replay mode, instead of actually letting the inferior run as a
     56    process, we simulate its execution by playing back the recorded
     57    execution log.  For each instruction in the log, we simulate the
     58    instruction's side effects by duplicating the changes that it would
     59    have made on memory and registers.  */
     60 
     61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM	200000
     62 
     63 #define RECORD_FULL_IS_REPLAY \
     64      (record_full_list->next || execution_direction == EXEC_REVERSE)
     65 
     66 #define RECORD_FULL_FILE_MAGIC	netorder32(0x20091016)
     67 
     68 /* These are the core structs of the process record functionality.
     69 
     70    A record_full_entry is a record of the value change of a register
     71    ("record_full_reg") or a part of memory ("record_full_mem").  And each
     72    instruction must have a struct record_full_entry ("record_full_end")
     73    that indicates that this is the last struct record_full_entry of this
     74    instruction.
     75 
     76    Each struct record_full_entry is linked to "record_full_list" by "prev"
     77    and "next" pointers.  */
     78 
     79 struct record_full_mem_entry
     80 {
     81   CORE_ADDR addr;
     82   int len;
     83   /* Set this flag if target memory for this entry
     84      can no longer be accessed.  */
     85   int mem_entry_not_accessible;
     86   union
     87   {
     88     gdb_byte *ptr;
     89     gdb_byte buf[sizeof (gdb_byte *)];
     90   } u;
     91 };
     92 
     93 struct record_full_reg_entry
     94 {
     95   unsigned short num;
     96   unsigned short len;
     97   union
     98   {
     99     gdb_byte *ptr;
    100     gdb_byte buf[2 * sizeof (gdb_byte *)];
    101   } u;
    102 };
    103 
    104 struct record_full_end_entry
    105 {
    106   enum gdb_signal sigval;
    107   ULONGEST insn_num;
    108 };
    109 
    110 enum record_full_type
    111 {
    112   record_full_end = 0,
    113   record_full_reg,
    114   record_full_mem
    115 };
    116 
    117 /* This is the data structure that makes up the execution log.
    118 
    119    The execution log consists of a single linked list of entries
    120    of type "struct record_full_entry".  It is doubly linked so that it
    121    can be traversed in either direction.
    122 
    123    The start of the list is anchored by a struct called
    124    "record_full_first".  The pointer "record_full_list" either points
    125    to the last entry that was added to the list (in record mode), or to
    126    the next entry in the list that will be executed (in replay mode).
    127 
    128    Each list element (struct record_full_entry), in addition to next
    129    and prev pointers, consists of a union of three entry types: mem,
    130    reg, and end.  A field called "type" determines which entry type is
    131    represented by a given list element.
    132 
    133    Each instruction that is added to the execution log is represented
    134    by a variable number of list elements ('entries').  The instruction
    135    will have one "reg" entry for each register that is changed by
    136    executing the instruction (including the PC in every case).  It
    137    will also have one "mem" entry for each memory change.  Finally,
    138    each instruction will have an "end" entry that separates it from
    139    the changes associated with the next instruction.  */
    140 
    141 struct record_full_entry
    142 {
    143   struct record_full_entry *prev;
    144   struct record_full_entry *next;
    145   enum record_full_type type;
    146   union
    147   {
    148     /* reg */
    149     struct record_full_reg_entry reg;
    150     /* mem */
    151     struct record_full_mem_entry mem;
    152     /* end */
    153     struct record_full_end_entry end;
    154   } u;
    155 };
    156 
    157 /* If true, query if PREC cannot record memory
    158    change of next instruction.  */
    159 int record_full_memory_query = 0;
    160 
    161 struct record_full_core_buf_entry
    162 {
    163   struct record_full_core_buf_entry *prev;
    164   struct target_section *p;
    165   bfd_byte *buf;
    166 };
    167 
    168 /* Record buf with core target.  */
    169 static gdb_byte *record_full_core_regbuf = NULL;
    170 static struct target_section *record_full_core_start;
    171 static struct target_section *record_full_core_end;
    172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
    173 
    174 /* The following variables are used for managing the linked list that
    175    represents the execution log.
    176 
    177    record_full_first is the anchor that holds down the beginning of
    178    the list.
    179 
    180    record_full_list serves two functions:
    181      1) In record mode, it anchors the end of the list.
    182      2) In replay mode, it traverses the list and points to
    183         the next instruction that must be emulated.
    184 
    185    record_full_arch_list_head and record_full_arch_list_tail are used
    186    to manage a separate list, which is used to build up the change
    187    elements of the currently executing instruction during record mode.
    188    When this instruction has been completely annotated in the "arch
    189    list", it will be appended to the main execution log.  */
    190 
    191 static struct record_full_entry record_full_first;
    192 static struct record_full_entry *record_full_list = &record_full_first;
    193 static struct record_full_entry *record_full_arch_list_head = NULL;
    194 static struct record_full_entry *record_full_arch_list_tail = NULL;
    195 
    196 /* 1 ask user. 0 auto delete the last struct record_full_entry.  */
    197 static int record_full_stop_at_limit = 1;
    198 /* Maximum allowed number of insns in execution log.  */
    199 static unsigned int record_full_insn_max_num
    200 	= DEFAULT_RECORD_FULL_INSN_MAX_NUM;
    201 /* Actual count of insns presently in execution log.  */
    202 static unsigned int record_full_insn_num = 0;
    203 /* Count of insns logged so far (may be larger
    204    than count of insns presently in execution log).  */
    205 static ULONGEST record_full_insn_count;
    206 
    207 /* The target_ops of process record.  */
    208 static struct target_ops record_full_ops;
    209 static struct target_ops record_full_core_ops;
    210 
    211 /* See record-full.h.  */
    212 
    213 int
    214 record_full_is_used (void)
    215 {
    216   struct target_ops *t;
    217 
    218   t = find_record_target ();
    219   return (t == &record_full_ops
    220 	  || t == &record_full_core_ops);
    221 }
    222 
    223 
    224 /* Command lists for "set/show record full".  */
    225 static struct cmd_list_element *set_record_full_cmdlist;
    226 static struct cmd_list_element *show_record_full_cmdlist;
    227 
    228 /* Command list for "record full".  */
    229 static struct cmd_list_element *record_full_cmdlist;
    230 
    231 static void record_full_goto_insn (struct record_full_entry *entry,
    232 				   enum exec_direction_kind dir);
    233 static void record_full_save (struct target_ops *self,
    234 			      const char *recfilename);
    235 
    236 /* Alloc and free functions for record_full_reg, record_full_mem, and
    237    record_full_end entries.  */
    238 
    239 /* Alloc a record_full_reg record entry.  */
    240 
    241 static inline struct record_full_entry *
    242 record_full_reg_alloc (struct regcache *regcache, int regnum)
    243 {
    244   struct record_full_entry *rec;
    245   struct gdbarch *gdbarch = get_regcache_arch (regcache);
    246 
    247   rec = XCNEW (struct record_full_entry);
    248   rec->type = record_full_reg;
    249   rec->u.reg.num = regnum;
    250   rec->u.reg.len = register_size (gdbarch, regnum);
    251   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
    252     rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
    253 
    254   return rec;
    255 }
    256 
    257 /* Free a record_full_reg record entry.  */
    258 
    259 static inline void
    260 record_full_reg_release (struct record_full_entry *rec)
    261 {
    262   gdb_assert (rec->type == record_full_reg);
    263   if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
    264     xfree (rec->u.reg.u.ptr);
    265   xfree (rec);
    266 }
    267 
    268 /* Alloc a record_full_mem record entry.  */
    269 
    270 static inline struct record_full_entry *
    271 record_full_mem_alloc (CORE_ADDR addr, int len)
    272 {
    273   struct record_full_entry *rec;
    274 
    275   rec = XCNEW (struct record_full_entry);
    276   rec->type = record_full_mem;
    277   rec->u.mem.addr = addr;
    278   rec->u.mem.len = len;
    279   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
    280     rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
    281 
    282   return rec;
    283 }
    284 
    285 /* Free a record_full_mem record entry.  */
    286 
    287 static inline void
    288 record_full_mem_release (struct record_full_entry *rec)
    289 {
    290   gdb_assert (rec->type == record_full_mem);
    291   if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
    292     xfree (rec->u.mem.u.ptr);
    293   xfree (rec);
    294 }
    295 
    296 /* Alloc a record_full_end record entry.  */
    297 
    298 static inline struct record_full_entry *
    299 record_full_end_alloc (void)
    300 {
    301   struct record_full_entry *rec;
    302 
    303   rec = XCNEW (struct record_full_entry);
    304   rec->type = record_full_end;
    305 
    306   return rec;
    307 }
    308 
    309 /* Free a record_full_end record entry.  */
    310 
    311 static inline void
    312 record_full_end_release (struct record_full_entry *rec)
    313 {
    314   xfree (rec);
    315 }
    316 
    317 /* Free one record entry, any type.
    318    Return entry->type, in case caller wants to know.  */
    319 
    320 static inline enum record_full_type
    321 record_full_entry_release (struct record_full_entry *rec)
    322 {
    323   enum record_full_type type = rec->type;
    324 
    325   switch (type) {
    326   case record_full_reg:
    327     record_full_reg_release (rec);
    328     break;
    329   case record_full_mem:
    330     record_full_mem_release (rec);
    331     break;
    332   case record_full_end:
    333     record_full_end_release (rec);
    334     break;
    335   }
    336   return type;
    337 }
    338 
    339 /* Free all record entries in list pointed to by REC.  */
    340 
    341 static void
    342 record_full_list_release (struct record_full_entry *rec)
    343 {
    344   if (!rec)
    345     return;
    346 
    347   while (rec->next)
    348     rec = rec->next;
    349 
    350   while (rec->prev)
    351     {
    352       rec = rec->prev;
    353       record_full_entry_release (rec->next);
    354     }
    355 
    356   if (rec == &record_full_first)
    357     {
    358       record_full_insn_num = 0;
    359       record_full_first.next = NULL;
    360     }
    361   else
    362     record_full_entry_release (rec);
    363 }
    364 
    365 /* Free all record entries forward of the given list position.  */
    366 
    367 static void
    368 record_full_list_release_following (struct record_full_entry *rec)
    369 {
    370   struct record_full_entry *tmp = rec->next;
    371 
    372   rec->next = NULL;
    373   while (tmp)
    374     {
    375       rec = tmp->next;
    376       if (record_full_entry_release (tmp) == record_full_end)
    377 	{
    378 	  record_full_insn_num--;
    379 	  record_full_insn_count--;
    380 	}
    381       tmp = rec;
    382     }
    383 }
    384 
    385 /* Delete the first instruction from the beginning of the log, to make
    386    room for adding a new instruction at the end of the log.
    387 
    388    Note -- this function does not modify record_full_insn_num.  */
    389 
    390 static void
    391 record_full_list_release_first (void)
    392 {
    393   struct record_full_entry *tmp;
    394 
    395   if (!record_full_first.next)
    396     return;
    397 
    398   /* Loop until a record_full_end.  */
    399   while (1)
    400     {
    401       /* Cut record_full_first.next out of the linked list.  */
    402       tmp = record_full_first.next;
    403       record_full_first.next = tmp->next;
    404       tmp->next->prev = &record_full_first;
    405 
    406       /* tmp is now isolated, and can be deleted.  */
    407       if (record_full_entry_release (tmp) == record_full_end)
    408 	break;	/* End loop at first record_full_end.  */
    409 
    410       if (!record_full_first.next)
    411 	{
    412 	  gdb_assert (record_full_insn_num == 1);
    413 	  break;	/* End loop when list is empty.  */
    414 	}
    415     }
    416 }
    417 
    418 /* Add a struct record_full_entry to record_full_arch_list.  */
    419 
    420 static void
    421 record_full_arch_list_add (struct record_full_entry *rec)
    422 {
    423   if (record_debug > 1)
    424     fprintf_unfiltered (gdb_stdlog,
    425 			"Process record: record_full_arch_list_add %s.\n",
    426 			host_address_to_string (rec));
    427 
    428   if (record_full_arch_list_tail)
    429     {
    430       record_full_arch_list_tail->next = rec;
    431       rec->prev = record_full_arch_list_tail;
    432       record_full_arch_list_tail = rec;
    433     }
    434   else
    435     {
    436       record_full_arch_list_head = rec;
    437       record_full_arch_list_tail = rec;
    438     }
    439 }
    440 
    441 /* Return the value storage location of a record entry.  */
    442 static inline gdb_byte *
    443 record_full_get_loc (struct record_full_entry *rec)
    444 {
    445   switch (rec->type) {
    446   case record_full_mem:
    447     if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
    448       return rec->u.mem.u.ptr;
    449     else
    450       return rec->u.mem.u.buf;
    451   case record_full_reg:
    452     if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
    453       return rec->u.reg.u.ptr;
    454     else
    455       return rec->u.reg.u.buf;
    456   case record_full_end:
    457   default:
    458     gdb_assert_not_reached ("unexpected record_full_entry type");
    459     return NULL;
    460   }
    461 }
    462 
    463 /* Record the value of a register NUM to record_full_arch_list.  */
    464 
    465 int
    466 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
    467 {
    468   struct record_full_entry *rec;
    469 
    470   if (record_debug > 1)
    471     fprintf_unfiltered (gdb_stdlog,
    472 			"Process record: add register num = %d to "
    473 			"record list.\n",
    474 			regnum);
    475 
    476   rec = record_full_reg_alloc (regcache, regnum);
    477 
    478   regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
    479 
    480   record_full_arch_list_add (rec);
    481 
    482   return 0;
    483 }
    484 
    485 /* Record the value of a region of memory whose address is ADDR and
    486    length is LEN to record_full_arch_list.  */
    487 
    488 int
    489 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
    490 {
    491   struct record_full_entry *rec;
    492 
    493   if (record_debug > 1)
    494     fprintf_unfiltered (gdb_stdlog,
    495 			"Process record: add mem addr = %s len = %d to "
    496 			"record list.\n",
    497 			paddress (target_gdbarch (), addr), len);
    498 
    499   if (!addr)	/* FIXME: Why?  Some arch must permit it...  */
    500     return 0;
    501 
    502   rec = record_full_mem_alloc (addr, len);
    503 
    504   if (record_read_memory (target_gdbarch (), addr,
    505 			  record_full_get_loc (rec), len))
    506     {
    507       record_full_mem_release (rec);
    508       return -1;
    509     }
    510 
    511   record_full_arch_list_add (rec);
    512 
    513   return 0;
    514 }
    515 
    516 /* Add a record_full_end type struct record_full_entry to
    517    record_full_arch_list.  */
    518 
    519 int
    520 record_full_arch_list_add_end (void)
    521 {
    522   struct record_full_entry *rec;
    523 
    524   if (record_debug > 1)
    525     fprintf_unfiltered (gdb_stdlog,
    526 			"Process record: add end to arch list.\n");
    527 
    528   rec = record_full_end_alloc ();
    529   rec->u.end.sigval = GDB_SIGNAL_0;
    530   rec->u.end.insn_num = ++record_full_insn_count;
    531 
    532   record_full_arch_list_add (rec);
    533 
    534   return 0;
    535 }
    536 
    537 static void
    538 record_full_check_insn_num (void)
    539 {
    540   if (record_full_insn_num == record_full_insn_max_num)
    541     {
    542       /* Ask user what to do.  */
    543       if (record_full_stop_at_limit)
    544 	{
    545 	  if (!yquery (_("Do you want to auto delete previous execution "
    546 			"log entries when record/replay buffer becomes "
    547 			"full (record full stop-at-limit)?")))
    548 	    error (_("Process record: stopped by user."));
    549 	  record_full_stop_at_limit = 0;
    550 	}
    551     }
    552 }
    553 
    554 static void
    555 record_full_arch_list_cleanups (void *ignore)
    556 {
    557   record_full_list_release (record_full_arch_list_tail);
    558 }
    559 
    560 /* Before inferior step (when GDB record the running message, inferior
    561    only can step), GDB will call this function to record the values to
    562    record_full_list.  This function will call gdbarch_process_record to
    563    record the running message of inferior and set them to
    564    record_full_arch_list, and add it to record_full_list.  */
    565 
    566 static int
    567 record_full_message (struct regcache *regcache, enum gdb_signal signal)
    568 {
    569   int ret;
    570   struct gdbarch *gdbarch = get_regcache_arch (regcache);
    571   struct cleanup *old_cleanups
    572     = make_cleanup (record_full_arch_list_cleanups, 0);
    573 
    574   record_full_arch_list_head = NULL;
    575   record_full_arch_list_tail = NULL;
    576 
    577   /* Check record_full_insn_num.  */
    578   record_full_check_insn_num ();
    579 
    580   /* If gdb sends a signal value to target_resume,
    581      save it in the 'end' field of the previous instruction.
    582 
    583      Maybe process record should record what really happened,
    584      rather than what gdb pretends has happened.
    585 
    586      So if Linux delivered the signal to the child process during
    587      the record mode, we will record it and deliver it again in
    588      the replay mode.
    589 
    590      If user says "ignore this signal" during the record mode, then
    591      it will be ignored again during the replay mode (no matter if
    592      the user says something different, like "deliver this signal"
    593      during the replay mode).
    594 
    595      User should understand that nothing he does during the replay
    596      mode will change the behavior of the child.  If he tries,
    597      then that is a user error.
    598 
    599      But we should still deliver the signal to gdb during the replay,
    600      if we delivered it during the recording.  Therefore we should
    601      record the signal during record_full_wait, not
    602      record_full_resume.  */
    603   if (record_full_list != &record_full_first)  /* FIXME better way to check */
    604     {
    605       gdb_assert (record_full_list->type == record_full_end);
    606       record_full_list->u.end.sigval = signal;
    607     }
    608 
    609   if (signal == GDB_SIGNAL_0
    610       || !gdbarch_process_record_signal_p (gdbarch))
    611     ret = gdbarch_process_record (gdbarch,
    612 				  regcache,
    613 				  regcache_read_pc (regcache));
    614   else
    615     ret = gdbarch_process_record_signal (gdbarch,
    616 					 regcache,
    617 					 signal);
    618 
    619   if (ret > 0)
    620     error (_("Process record: inferior program stopped."));
    621   if (ret < 0)
    622     error (_("Process record: failed to record execution log."));
    623 
    624   discard_cleanups (old_cleanups);
    625 
    626   record_full_list->next = record_full_arch_list_head;
    627   record_full_arch_list_head->prev = record_full_list;
    628   record_full_list = record_full_arch_list_tail;
    629 
    630   if (record_full_insn_num == record_full_insn_max_num)
    631     record_full_list_release_first ();
    632   else
    633     record_full_insn_num++;
    634 
    635   return 1;
    636 }
    637 
    638 struct record_full_message_args {
    639   struct regcache *regcache;
    640   enum gdb_signal signal;
    641 };
    642 
    643 static int
    644 record_full_message_wrapper (void *args)
    645 {
    646   struct record_full_message_args *record_full_args
    647     = (struct record_full_message_args *) args;
    648 
    649   return record_full_message (record_full_args->regcache,
    650 			      record_full_args->signal);
    651 }
    652 
    653 static int
    654 record_full_message_wrapper_safe (struct regcache *regcache,
    655 				  enum gdb_signal signal)
    656 {
    657   struct record_full_message_args args;
    658 
    659   args.regcache = regcache;
    660   args.signal = signal;
    661 
    662   return catch_errors (record_full_message_wrapper, &args, "",
    663 		       RETURN_MASK_ALL);
    664 }
    665 
    666 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
    667    doesn't need record.  */
    668 
    669 static int record_full_gdb_operation_disable = 0;
    670 
    671 struct cleanup *
    672 record_full_gdb_operation_disable_set (void)
    673 {
    674   struct cleanup *old_cleanups = NULL;
    675 
    676   old_cleanups =
    677     make_cleanup_restore_integer (&record_full_gdb_operation_disable);
    678   record_full_gdb_operation_disable = 1;
    679 
    680   return old_cleanups;
    681 }
    682 
    683 /* Flag set to TRUE for target_stopped_by_watchpoint.  */
    684 static enum target_stop_reason record_full_stop_reason
    685   = TARGET_STOPPED_BY_NO_REASON;
    686 
    687 /* Execute one instruction from the record log.  Each instruction in
    688    the log will be represented by an arbitrary sequence of register
    689    entries and memory entries, followed by an 'end' entry.  */
    690 
    691 static inline void
    692 record_full_exec_insn (struct regcache *regcache,
    693 		       struct gdbarch *gdbarch,
    694 		       struct record_full_entry *entry)
    695 {
    696   switch (entry->type)
    697     {
    698     case record_full_reg: /* reg */
    699       {
    700         gdb_byte reg[MAX_REGISTER_SIZE];
    701 
    702         if (record_debug > 1)
    703           fprintf_unfiltered (gdb_stdlog,
    704                               "Process record: record_full_reg %s to "
    705                               "inferior num = %d.\n",
    706                               host_address_to_string (entry),
    707                               entry->u.reg.num);
    708 
    709         regcache_cooked_read (regcache, entry->u.reg.num, reg);
    710         regcache_cooked_write (regcache, entry->u.reg.num,
    711 			       record_full_get_loc (entry));
    712         memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
    713       }
    714       break;
    715 
    716     case record_full_mem: /* mem */
    717       {
    718 	/* Nothing to do if the entry is flagged not_accessible.  */
    719         if (!entry->u.mem.mem_entry_not_accessible)
    720           {
    721             gdb_byte *mem = (gdb_byte *) xmalloc (entry->u.mem.len);
    722             struct cleanup *cleanup = make_cleanup (xfree, mem);
    723 
    724             if (record_debug > 1)
    725               fprintf_unfiltered (gdb_stdlog,
    726                                   "Process record: record_full_mem %s to "
    727                                   "inferior addr = %s len = %d.\n",
    728                                   host_address_to_string (entry),
    729                                   paddress (gdbarch, entry->u.mem.addr),
    730                                   entry->u.mem.len);
    731 
    732             if (record_read_memory (gdbarch,
    733 				    entry->u.mem.addr, mem, entry->u.mem.len))
    734 	      entry->u.mem.mem_entry_not_accessible = 1;
    735             else
    736               {
    737                 if (target_write_memory (entry->u.mem.addr,
    738 					 record_full_get_loc (entry),
    739 					 entry->u.mem.len))
    740                   {
    741                     entry->u.mem.mem_entry_not_accessible = 1;
    742                     if (record_debug)
    743                       warning (_("Process record: error writing memory at "
    744 				 "addr = %s len = %d."),
    745                                paddress (gdbarch, entry->u.mem.addr),
    746                                entry->u.mem.len);
    747                   }
    748                 else
    749 		  {
    750 		    memcpy (record_full_get_loc (entry), mem,
    751 			    entry->u.mem.len);
    752 
    753 		    /* We've changed memory --- check if a hardware
    754 		       watchpoint should trap.  Note that this
    755 		       presently assumes the target beneath supports
    756 		       continuable watchpoints.  On non-continuable
    757 		       watchpoints target, we'll want to check this
    758 		       _before_ actually doing the memory change, and
    759 		       not doing the change at all if the watchpoint
    760 		       traps.  */
    761 		    if (hardware_watchpoint_inserted_in_range
    762 			(get_regcache_aspace (regcache),
    763 			 entry->u.mem.addr, entry->u.mem.len))
    764 		      record_full_stop_reason = TARGET_STOPPED_BY_WATCHPOINT;
    765 		  }
    766               }
    767 
    768 	    do_cleanups (cleanup);
    769           }
    770       }
    771       break;
    772     }
    773 }
    774 
    775 static void record_full_restore (void);
    776 
    777 /* Asynchronous signal handle registered as event loop source for when
    778    we have pending events ready to be passed to the core.  */
    779 
    780 static struct async_event_handler *record_full_async_inferior_event_token;
    781 
    782 static void
    783 record_full_async_inferior_event_handler (gdb_client_data data)
    784 {
    785   inferior_event_handler (INF_REG_EVENT, NULL);
    786 }
    787 
    788 /* Open the process record target.  */
    789 
    790 static void
    791 record_full_core_open_1 (const char *name, int from_tty)
    792 {
    793   struct regcache *regcache = get_current_regcache ();
    794   int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
    795   int i;
    796 
    797   /* Get record_full_core_regbuf.  */
    798   target_fetch_registers (regcache, -1);
    799   record_full_core_regbuf = (gdb_byte *) xmalloc (MAX_REGISTER_SIZE * regnum);
    800   for (i = 0; i < regnum; i ++)
    801     regcache_raw_collect (regcache, i,
    802 			  record_full_core_regbuf + MAX_REGISTER_SIZE * i);
    803 
    804   /* Get record_full_core_start and record_full_core_end.  */
    805   if (build_section_table (core_bfd, &record_full_core_start,
    806 			   &record_full_core_end))
    807     {
    808       xfree (record_full_core_regbuf);
    809       record_full_core_regbuf = NULL;
    810       error (_("\"%s\": Can't find sections: %s"),
    811 	     bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
    812     }
    813 
    814   push_target (&record_full_core_ops);
    815   record_full_restore ();
    816 }
    817 
    818 /* "to_open" target method for 'live' processes.  */
    819 
    820 static void
    821 record_full_open_1 (const char *name, int from_tty)
    822 {
    823   if (record_debug)
    824     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
    825 
    826   /* check exec */
    827   if (!target_has_execution)
    828     error (_("Process record: the program is not being run."));
    829   if (non_stop)
    830     error (_("Process record target can't debug inferior in non-stop mode "
    831 	     "(non-stop)."));
    832 
    833   if (!gdbarch_process_record_p (target_gdbarch ()))
    834     error (_("Process record: the current architecture doesn't support "
    835 	     "record function."));
    836 
    837   push_target (&record_full_ops);
    838 }
    839 
    840 static void record_full_init_record_breakpoints (void);
    841 
    842 /* "to_open" target method.  Open the process record target.  */
    843 
    844 static void
    845 record_full_open (const char *name, int from_tty)
    846 {
    847   struct target_ops *t;
    848 
    849   if (record_debug)
    850     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
    851 
    852   record_preopen ();
    853 
    854   /* Reset */
    855   record_full_insn_num = 0;
    856   record_full_insn_count = 0;
    857   record_full_list = &record_full_first;
    858   record_full_list->next = NULL;
    859 
    860   if (core_bfd)
    861     record_full_core_open_1 (name, from_tty);
    862   else
    863     record_full_open_1 (name, from_tty);
    864 
    865   /* Register extra event sources in the event loop.  */
    866   record_full_async_inferior_event_token
    867     = create_async_event_handler (record_full_async_inferior_event_handler,
    868 				  NULL);
    869 
    870   record_full_init_record_breakpoints ();
    871 
    872   observer_notify_record_changed (current_inferior (),  1, "full", NULL);
    873 }
    874 
    875 /* "to_close" target method.  Close the process record target.  */
    876 
    877 static void
    878 record_full_close (struct target_ops *self)
    879 {
    880   struct record_full_core_buf_entry *entry;
    881 
    882   if (record_debug)
    883     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
    884 
    885   record_full_list_release (record_full_list);
    886 
    887   /* Release record_full_core_regbuf.  */
    888   if (record_full_core_regbuf)
    889     {
    890       xfree (record_full_core_regbuf);
    891       record_full_core_regbuf = NULL;
    892     }
    893 
    894   /* Release record_full_core_buf_list.  */
    895   if (record_full_core_buf_list)
    896     {
    897       for (entry = record_full_core_buf_list->prev; entry;
    898 	   entry = entry->prev)
    899 	{
    900 	  xfree (record_full_core_buf_list);
    901 	  record_full_core_buf_list = entry;
    902 	}
    903       record_full_core_buf_list = NULL;
    904     }
    905 
    906   if (record_full_async_inferior_event_token)
    907     delete_async_event_handler (&record_full_async_inferior_event_token);
    908 }
    909 
    910 /* "to_async" target method.  */
    911 
    912 static void
    913 record_full_async (struct target_ops *ops, int enable)
    914 {
    915   if (enable)
    916     mark_async_event_handler (record_full_async_inferior_event_token);
    917   else
    918     clear_async_event_handler (record_full_async_inferior_event_token);
    919 
    920   ops->beneath->to_async (ops->beneath, enable);
    921 }
    922 
    923 static int record_full_resume_step = 0;
    924 
    925 /* True if we've been resumed, and so each record_full_wait call should
    926    advance execution.  If this is false, record_full_wait will return a
    927    TARGET_WAITKIND_IGNORE.  */
    928 static int record_full_resumed = 0;
    929 
    930 /* The execution direction of the last resume we got.  This is
    931    necessary for async mode.  Vis (order is not strictly accurate):
    932 
    933    1. user has the global execution direction set to forward
    934    2. user does a reverse-step command
    935    3. record_full_resume is called with global execution direction
    936       temporarily switched to reverse
    937    4. GDB's execution direction is reverted back to forward
    938    5. target record notifies event loop there's an event to handle
    939    6. infrun asks the target which direction was it going, and switches
    940       the global execution direction accordingly (to reverse)
    941    7. infrun polls an event out of the record target, and handles it
    942    8. GDB goes back to the event loop, and goto #4.
    943 */
    944 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
    945 
    946 /* "to_resume" target method.  Resume the process record target.  */
    947 
    948 static void
    949 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
    950 		    enum gdb_signal signal)
    951 {
    952   record_full_resume_step = step;
    953   record_full_resumed = 1;
    954   record_full_execution_dir = execution_direction;
    955 
    956   if (!RECORD_FULL_IS_REPLAY)
    957     {
    958       struct gdbarch *gdbarch = target_thread_architecture (ptid);
    959 
    960       record_full_message (get_current_regcache (), signal);
    961 
    962       if (!step)
    963         {
    964           /* This is not hard single step.  */
    965           if (!gdbarch_software_single_step_p (gdbarch))
    966             {
    967               /* This is a normal continue.  */
    968               step = 1;
    969             }
    970           else
    971             {
    972               /* This arch support soft sigle step.  */
    973               if (thread_has_single_step_breakpoints_set (inferior_thread ()))
    974                 {
    975                   /* This is a soft single step.  */
    976                   record_full_resume_step = 1;
    977                 }
    978               else
    979                 {
    980                   /* This is a continue.
    981                      Try to insert a soft single step breakpoint.  */
    982                   if (!gdbarch_software_single_step (gdbarch,
    983                                                      get_current_frame ()))
    984                     {
    985                       /* This system don't want use soft single step.
    986                          Use hard sigle step.  */
    987                       step = 1;
    988                     }
    989                 }
    990             }
    991         }
    992 
    993       /* Make sure the target beneath reports all signals.  */
    994       target_pass_signals (0, NULL);
    995 
    996       ops->beneath->to_resume (ops->beneath, ptid, step, signal);
    997     }
    998 
    999   /* We are about to start executing the inferior (or simulate it),
   1000      let's register it with the event loop.  */
   1001   if (target_can_async_p ())
   1002     target_async (1);
   1003 }
   1004 
   1005 static int record_full_get_sig = 0;
   1006 
   1007 /* SIGINT signal handler, registered by "to_wait" method.  */
   1008 
   1009 static void
   1010 record_full_sig_handler (int signo)
   1011 {
   1012   if (record_debug)
   1013     fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
   1014 
   1015   /* It will break the running inferior in replay mode.  */
   1016   record_full_resume_step = 1;
   1017 
   1018   /* It will let record_full_wait set inferior status to get the signal
   1019      SIGINT.  */
   1020   record_full_get_sig = 1;
   1021 }
   1022 
   1023 static void
   1024 record_full_wait_cleanups (void *ignore)
   1025 {
   1026   if (execution_direction == EXEC_REVERSE)
   1027     {
   1028       if (record_full_list->next)
   1029 	record_full_list = record_full_list->next;
   1030     }
   1031   else
   1032     record_full_list = record_full_list->prev;
   1033 }
   1034 
   1035 /* "to_wait" target method for process record target.
   1036 
   1037    In record mode, the target is always run in singlestep mode
   1038    (even when gdb says to continue).  The to_wait method intercepts
   1039    the stop events and determines which ones are to be passed on to
   1040    gdb.  Most stop events are just singlestep events that gdb is not
   1041    to know about, so the to_wait method just records them and keeps
   1042    singlestepping.
   1043 
   1044    In replay mode, this function emulates the recorded execution log,
   1045    one instruction at a time (forward or backward), and determines
   1046    where to stop.  */
   1047 
   1048 static ptid_t
   1049 record_full_wait_1 (struct target_ops *ops,
   1050 		    ptid_t ptid, struct target_waitstatus *status,
   1051 		    int options)
   1052 {
   1053   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
   1054 
   1055   if (record_debug)
   1056     fprintf_unfiltered (gdb_stdlog,
   1057 			"Process record: record_full_wait "
   1058 			"record_full_resume_step = %d, "
   1059 			"record_full_resumed = %d, direction=%s\n",
   1060 			record_full_resume_step, record_full_resumed,
   1061 			record_full_execution_dir == EXEC_FORWARD
   1062 			? "forward" : "reverse");
   1063 
   1064   if (!record_full_resumed)
   1065     {
   1066       gdb_assert ((options & TARGET_WNOHANG) != 0);
   1067 
   1068       /* No interesting event.  */
   1069       status->kind = TARGET_WAITKIND_IGNORE;
   1070       return minus_one_ptid;
   1071     }
   1072 
   1073   record_full_get_sig = 0;
   1074   signal (SIGINT, record_full_sig_handler);
   1075 
   1076   record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
   1077 
   1078   if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
   1079     {
   1080       if (record_full_resume_step)
   1081 	{
   1082 	  /* This is a single step.  */
   1083 	  return ops->beneath->to_wait (ops->beneath, ptid, status, options);
   1084 	}
   1085       else
   1086 	{
   1087 	  /* This is not a single step.  */
   1088 	  ptid_t ret;
   1089 	  CORE_ADDR tmp_pc;
   1090 	  struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
   1091 
   1092 	  while (1)
   1093 	    {
   1094 	      struct thread_info *tp;
   1095 
   1096 	      ret = ops->beneath->to_wait (ops->beneath, ptid, status, options);
   1097 	      if (status->kind == TARGET_WAITKIND_IGNORE)
   1098 		{
   1099 		  if (record_debug)
   1100 		    fprintf_unfiltered (gdb_stdlog,
   1101 					"Process record: record_full_wait "
   1102 					"target beneath not done yet\n");
   1103 		  return ret;
   1104 		}
   1105 
   1106 	      ALL_NON_EXITED_THREADS (tp)
   1107                 delete_single_step_breakpoints (tp);
   1108 
   1109 	      if (record_full_resume_step)
   1110 		return ret;
   1111 
   1112 	      /* Is this a SIGTRAP?  */
   1113 	      if (status->kind == TARGET_WAITKIND_STOPPED
   1114 		  && status->value.sig == GDB_SIGNAL_TRAP)
   1115 		{
   1116 		  struct regcache *regcache;
   1117 		  struct address_space *aspace;
   1118 		  enum target_stop_reason *stop_reason_p
   1119 		    = &record_full_stop_reason;
   1120 
   1121 		  /* Yes -- this is likely our single-step finishing,
   1122 		     but check if there's any reason the core would be
   1123 		     interested in the event.  */
   1124 
   1125 		  registers_changed ();
   1126 		  regcache = get_current_regcache ();
   1127 		  tmp_pc = regcache_read_pc (regcache);
   1128 		  aspace = get_regcache_aspace (regcache);
   1129 
   1130 		  if (target_stopped_by_watchpoint ())
   1131 		    {
   1132 		      /* Always interested in watchpoints.  */
   1133 		    }
   1134 		  else if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
   1135 							       stop_reason_p))
   1136 		    {
   1137 		      /* There is a breakpoint here.  Let the core
   1138 			 handle it.  */
   1139 		    }
   1140 		  else
   1141 		    {
   1142 		      /* This is a single-step trap.  Record the
   1143 		         insn and issue another step.
   1144                          FIXME: this part can be a random SIGTRAP too.
   1145                          But GDB cannot handle it.  */
   1146                       int step = 1;
   1147 
   1148 		      if (!record_full_message_wrapper_safe (regcache,
   1149 							     GDB_SIGNAL_0))
   1150   			{
   1151                            status->kind = TARGET_WAITKIND_STOPPED;
   1152                            status->value.sig = GDB_SIGNAL_0;
   1153                            break;
   1154   			}
   1155 
   1156                       if (gdbarch_software_single_step_p (gdbarch))
   1157 			{
   1158 			  /* Try to insert the software single step breakpoint.
   1159 			     If insert success, set step to 0.  */
   1160 			  set_executing (inferior_ptid, 0);
   1161 			  reinit_frame_cache ();
   1162 			  if (gdbarch_software_single_step (gdbarch,
   1163                                                             get_current_frame ()))
   1164 			    step = 0;
   1165 			  set_executing (inferior_ptid, 1);
   1166 			}
   1167 
   1168 		      if (record_debug)
   1169 			fprintf_unfiltered (gdb_stdlog,
   1170 					    "Process record: record_full_wait "
   1171 					    "issuing one more step in the "
   1172 					    "target beneath\n");
   1173 		      ops->beneath->to_resume (ops->beneath, ptid, step,
   1174 					       GDB_SIGNAL_0);
   1175 		      continue;
   1176 		    }
   1177 		}
   1178 
   1179 	      /* The inferior is broken by a breakpoint or a signal.  */
   1180 	      break;
   1181 	    }
   1182 
   1183 	  return ret;
   1184 	}
   1185     }
   1186   else
   1187     {
   1188       struct regcache *regcache = get_current_regcache ();
   1189       struct gdbarch *gdbarch = get_regcache_arch (regcache);
   1190       struct address_space *aspace = get_regcache_aspace (regcache);
   1191       int continue_flag = 1;
   1192       int first_record_full_end = 1;
   1193       struct cleanup *old_cleanups
   1194 	= make_cleanup (record_full_wait_cleanups, 0);
   1195       CORE_ADDR tmp_pc;
   1196 
   1197       record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
   1198       status->kind = TARGET_WAITKIND_STOPPED;
   1199 
   1200       /* Check breakpoint when forward execute.  */
   1201       if (execution_direction == EXEC_FORWARD)
   1202 	{
   1203 	  tmp_pc = regcache_read_pc (regcache);
   1204 	  if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
   1205 						  &record_full_stop_reason))
   1206 	    {
   1207 	      if (record_debug)
   1208 		fprintf_unfiltered (gdb_stdlog,
   1209 				    "Process record: break at %s.\n",
   1210 				    paddress (gdbarch, tmp_pc));
   1211 	      goto replay_out;
   1212 	    }
   1213 	}
   1214 
   1215       /* If GDB is in terminal_inferior mode, it will not get the signal.
   1216          And in GDB replay mode, GDB doesn't need to be in terminal_inferior
   1217          mode, because inferior will not executed.
   1218          Then set it to terminal_ours to make GDB get the signal.  */
   1219       target_terminal_ours ();
   1220 
   1221       /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
   1222          instruction.  */
   1223       if (execution_direction == EXEC_FORWARD && record_full_list->next)
   1224 	record_full_list = record_full_list->next;
   1225 
   1226       /* Loop over the record_full_list, looking for the next place to
   1227 	 stop.  */
   1228       do
   1229 	{
   1230 	  /* Check for beginning and end of log.  */
   1231 	  if (execution_direction == EXEC_REVERSE
   1232 	      && record_full_list == &record_full_first)
   1233 	    {
   1234 	      /* Hit beginning of record log in reverse.  */
   1235 	      status->kind = TARGET_WAITKIND_NO_HISTORY;
   1236 	      break;
   1237 	    }
   1238 	  if (execution_direction != EXEC_REVERSE && !record_full_list->next)
   1239 	    {
   1240 	      /* Hit end of record log going forward.  */
   1241 	      status->kind = TARGET_WAITKIND_NO_HISTORY;
   1242 	      break;
   1243 	    }
   1244 
   1245           record_full_exec_insn (regcache, gdbarch, record_full_list);
   1246 
   1247 	  if (record_full_list->type == record_full_end)
   1248 	    {
   1249 	      if (record_debug > 1)
   1250 		fprintf_unfiltered (gdb_stdlog,
   1251 				    "Process record: record_full_end %s to "
   1252 				    "inferior.\n",
   1253 				    host_address_to_string (record_full_list));
   1254 
   1255 	      if (first_record_full_end && execution_direction == EXEC_REVERSE)
   1256 		{
   1257 		  /* When reverse excute, the first record_full_end is the
   1258 		     part of current instruction.  */
   1259 		  first_record_full_end = 0;
   1260 		}
   1261 	      else
   1262 		{
   1263 		  /* In EXEC_REVERSE mode, this is the record_full_end of prev
   1264 		     instruction.
   1265 		     In EXEC_FORWARD mode, this is the record_full_end of
   1266 		     current instruction.  */
   1267 		  /* step */
   1268 		  if (record_full_resume_step)
   1269 		    {
   1270 		      if (record_debug > 1)
   1271 			fprintf_unfiltered (gdb_stdlog,
   1272 					    "Process record: step.\n");
   1273 		      continue_flag = 0;
   1274 		    }
   1275 
   1276 		  /* check breakpoint */
   1277 		  tmp_pc = regcache_read_pc (regcache);
   1278 		  if (record_check_stopped_by_breakpoint (aspace, tmp_pc,
   1279 							  &record_full_stop_reason))
   1280 		    {
   1281 		      if (record_debug)
   1282 			fprintf_unfiltered (gdb_stdlog,
   1283 					    "Process record: break "
   1284 					    "at %s.\n",
   1285 					    paddress (gdbarch, tmp_pc));
   1286 
   1287 		      continue_flag = 0;
   1288 		    }
   1289 
   1290 		  if (record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT)
   1291 		    {
   1292 		      if (record_debug)
   1293 			fprintf_unfiltered (gdb_stdlog,
   1294 					    "Process record: hit hw "
   1295 					    "watchpoint.\n");
   1296 		      continue_flag = 0;
   1297 		    }
   1298 		  /* Check target signal */
   1299 		  if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
   1300 		    /* FIXME: better way to check */
   1301 		    continue_flag = 0;
   1302 		}
   1303 	    }
   1304 
   1305 	  if (continue_flag)
   1306 	    {
   1307 	      if (execution_direction == EXEC_REVERSE)
   1308 		{
   1309 		  if (record_full_list->prev)
   1310 		    record_full_list = record_full_list->prev;
   1311 		}
   1312 	      else
   1313 		{
   1314 		  if (record_full_list->next)
   1315 		    record_full_list = record_full_list->next;
   1316 		}
   1317 	    }
   1318 	}
   1319       while (continue_flag);
   1320 
   1321 replay_out:
   1322       if (record_full_get_sig)
   1323 	status->value.sig = GDB_SIGNAL_INT;
   1324       else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
   1325 	/* FIXME: better way to check */
   1326 	status->value.sig = record_full_list->u.end.sigval;
   1327       else
   1328 	status->value.sig = GDB_SIGNAL_TRAP;
   1329 
   1330       discard_cleanups (old_cleanups);
   1331     }
   1332 
   1333   signal (SIGINT, handle_sigint);
   1334 
   1335   do_cleanups (set_cleanups);
   1336   return inferior_ptid;
   1337 }
   1338 
   1339 static ptid_t
   1340 record_full_wait (struct target_ops *ops,
   1341 		  ptid_t ptid, struct target_waitstatus *status,
   1342 		  int options)
   1343 {
   1344   ptid_t return_ptid;
   1345 
   1346   return_ptid = record_full_wait_1 (ops, ptid, status, options);
   1347   if (status->kind != TARGET_WAITKIND_IGNORE)
   1348     {
   1349       /* We're reporting a stop.  Make sure any spurious
   1350 	 target_wait(WNOHANG) doesn't advance the target until the
   1351 	 core wants us resumed again.  */
   1352       record_full_resumed = 0;
   1353     }
   1354   return return_ptid;
   1355 }
   1356 
   1357 static int
   1358 record_full_stopped_by_watchpoint (struct target_ops *ops)
   1359 {
   1360   if (RECORD_FULL_IS_REPLAY)
   1361     return record_full_stop_reason == TARGET_STOPPED_BY_WATCHPOINT;
   1362   else
   1363     return ops->beneath->to_stopped_by_watchpoint (ops->beneath);
   1364 }
   1365 
   1366 static int
   1367 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
   1368 {
   1369   if (RECORD_FULL_IS_REPLAY)
   1370     return 0;
   1371   else
   1372     return ops->beneath->to_stopped_data_address (ops->beneath, addr_p);
   1373 }
   1374 
   1375 /* The to_stopped_by_sw_breakpoint method of target record-full.  */
   1376 
   1377 static int
   1378 record_full_stopped_by_sw_breakpoint (struct target_ops *ops)
   1379 {
   1380   return record_full_stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT;
   1381 }
   1382 
   1383 /* The to_supports_stopped_by_sw_breakpoint method of target
   1384    record-full.  */
   1385 
   1386 static int
   1387 record_full_supports_stopped_by_sw_breakpoint (struct target_ops *ops)
   1388 {
   1389   return 1;
   1390 }
   1391 
   1392 /* The to_stopped_by_hw_breakpoint method of target record-full.  */
   1393 
   1394 static int
   1395 record_full_stopped_by_hw_breakpoint (struct target_ops *ops)
   1396 {
   1397   return record_full_stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT;
   1398 }
   1399 
   1400 /* The to_supports_stopped_by_sw_breakpoint method of target
   1401    record-full.  */
   1402 
   1403 static int
   1404 record_full_supports_stopped_by_hw_breakpoint (struct target_ops *ops)
   1405 {
   1406   return 1;
   1407 }
   1408 
   1409 /* Record registers change (by user or by GDB) to list as an instruction.  */
   1410 
   1411 static void
   1412 record_full_registers_change (struct regcache *regcache, int regnum)
   1413 {
   1414   /* Check record_full_insn_num.  */
   1415   record_full_check_insn_num ();
   1416 
   1417   record_full_arch_list_head = NULL;
   1418   record_full_arch_list_tail = NULL;
   1419 
   1420   if (regnum < 0)
   1421     {
   1422       int i;
   1423 
   1424       for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
   1425 	{
   1426 	  if (record_full_arch_list_add_reg (regcache, i))
   1427 	    {
   1428 	      record_full_list_release (record_full_arch_list_tail);
   1429 	      error (_("Process record: failed to record execution log."));
   1430 	    }
   1431 	}
   1432     }
   1433   else
   1434     {
   1435       if (record_full_arch_list_add_reg (regcache, regnum))
   1436 	{
   1437 	  record_full_list_release (record_full_arch_list_tail);
   1438 	  error (_("Process record: failed to record execution log."));
   1439 	}
   1440     }
   1441   if (record_full_arch_list_add_end ())
   1442     {
   1443       record_full_list_release (record_full_arch_list_tail);
   1444       error (_("Process record: failed to record execution log."));
   1445     }
   1446   record_full_list->next = record_full_arch_list_head;
   1447   record_full_arch_list_head->prev = record_full_list;
   1448   record_full_list = record_full_arch_list_tail;
   1449 
   1450   if (record_full_insn_num == record_full_insn_max_num)
   1451     record_full_list_release_first ();
   1452   else
   1453     record_full_insn_num++;
   1454 }
   1455 
   1456 /* "to_store_registers" method for process record target.  */
   1457 
   1458 static void
   1459 record_full_store_registers (struct target_ops *ops,
   1460 			     struct regcache *regcache,
   1461 			     int regno)
   1462 {
   1463   if (!record_full_gdb_operation_disable)
   1464     {
   1465       if (RECORD_FULL_IS_REPLAY)
   1466 	{
   1467 	  int n;
   1468 
   1469 	  /* Let user choose if he wants to write register or not.  */
   1470 	  if (regno < 0)
   1471 	    n =
   1472 	      query (_("Because GDB is in replay mode, changing the "
   1473 		       "value of a register will make the execution "
   1474 		       "log unusable from this point onward.  "
   1475 		       "Change all registers?"));
   1476 	  else
   1477 	    n =
   1478 	      query (_("Because GDB is in replay mode, changing the value "
   1479 		       "of a register will make the execution log unusable "
   1480 		       "from this point onward.  Change register %s?"),
   1481 		      gdbarch_register_name (get_regcache_arch (regcache),
   1482 					       regno));
   1483 
   1484 	  if (!n)
   1485 	    {
   1486 	      /* Invalidate the value of regcache that was set in function
   1487 	         "regcache_raw_write".  */
   1488 	      if (regno < 0)
   1489 		{
   1490 		  int i;
   1491 
   1492 		  for (i = 0;
   1493 		       i < gdbarch_num_regs (get_regcache_arch (regcache));
   1494 		       i++)
   1495 		    regcache_invalidate (regcache, i);
   1496 		}
   1497 	      else
   1498 		regcache_invalidate (regcache, regno);
   1499 
   1500 	      error (_("Process record canceled the operation."));
   1501 	    }
   1502 
   1503 	  /* Destroy the record from here forward.  */
   1504 	  record_full_list_release_following (record_full_list);
   1505 	}
   1506 
   1507       record_full_registers_change (regcache, regno);
   1508     }
   1509   ops->beneath->to_store_registers (ops->beneath, regcache, regno);
   1510 }
   1511 
   1512 /* "to_xfer_partial" method.  Behavior is conditional on
   1513    RECORD_FULL_IS_REPLAY.
   1514    In replay mode, we cannot write memory unles we are willing to
   1515    invalidate the record/replay log from this point forward.  */
   1516 
   1517 static enum target_xfer_status
   1518 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
   1519 			  const char *annex, gdb_byte *readbuf,
   1520 			  const gdb_byte *writebuf, ULONGEST offset,
   1521 			  ULONGEST len, ULONGEST *xfered_len)
   1522 {
   1523   if (!record_full_gdb_operation_disable
   1524       && (object == TARGET_OBJECT_MEMORY
   1525 	  || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
   1526     {
   1527       if (RECORD_FULL_IS_REPLAY)
   1528 	{
   1529 	  /* Let user choose if he wants to write memory or not.  */
   1530 	  if (!query (_("Because GDB is in replay mode, writing to memory "
   1531 		        "will make the execution log unusable from this "
   1532 		        "point onward.  Write memory at address %s?"),
   1533 		       paddress (target_gdbarch (), offset)))
   1534 	    error (_("Process record canceled the operation."));
   1535 
   1536 	  /* Destroy the record from here forward.  */
   1537 	  record_full_list_release_following (record_full_list);
   1538 	}
   1539 
   1540       /* Check record_full_insn_num */
   1541       record_full_check_insn_num ();
   1542 
   1543       /* Record registers change to list as an instruction.  */
   1544       record_full_arch_list_head = NULL;
   1545       record_full_arch_list_tail = NULL;
   1546       if (record_full_arch_list_add_mem (offset, len))
   1547 	{
   1548 	  record_full_list_release (record_full_arch_list_tail);
   1549 	  if (record_debug)
   1550 	    fprintf_unfiltered (gdb_stdlog,
   1551 				"Process record: failed to record "
   1552 				"execution log.");
   1553 	  return TARGET_XFER_E_IO;
   1554 	}
   1555       if (record_full_arch_list_add_end ())
   1556 	{
   1557 	  record_full_list_release (record_full_arch_list_tail);
   1558 	  if (record_debug)
   1559 	    fprintf_unfiltered (gdb_stdlog,
   1560 				"Process record: failed to record "
   1561 				"execution log.");
   1562 	  return TARGET_XFER_E_IO;
   1563 	}
   1564       record_full_list->next = record_full_arch_list_head;
   1565       record_full_arch_list_head->prev = record_full_list;
   1566       record_full_list = record_full_arch_list_tail;
   1567 
   1568       if (record_full_insn_num == record_full_insn_max_num)
   1569 	record_full_list_release_first ();
   1570       else
   1571 	record_full_insn_num++;
   1572     }
   1573 
   1574   return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
   1575 					readbuf, writebuf, offset,
   1576 					len, xfered_len);
   1577 }
   1578 
   1579 /* This structure represents a breakpoint inserted while the record
   1580    target is active.  We use this to know when to install/remove
   1581    breakpoints in/from the target beneath.  For example, a breakpoint
   1582    may be inserted while recording, but removed when not replaying nor
   1583    recording.  In that case, the breakpoint had not been inserted on
   1584    the target beneath, so we should not try to remove it there.  */
   1585 
   1586 struct record_full_breakpoint
   1587 {
   1588   /* The address and address space the breakpoint was set at.  */
   1589   struct address_space *address_space;
   1590   CORE_ADDR addr;
   1591 
   1592   /* True when the breakpoint has been also installed in the target
   1593      beneath.  This will be false for breakpoints set during replay or
   1594      when recording.  */
   1595   int in_target_beneath;
   1596 };
   1597 
   1598 typedef struct record_full_breakpoint *record_full_breakpoint_p;
   1599 DEF_VEC_P(record_full_breakpoint_p);
   1600 
   1601 /* The list of breakpoints inserted while the record target is
   1602    active.  */
   1603 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
   1604 
   1605 static void
   1606 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
   1607 {
   1608   if (loc->loc_type != bp_loc_software_breakpoint)
   1609       return;
   1610 
   1611   if (loc->inserted)
   1612     {
   1613       struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
   1614 
   1615       bp->addr = loc->target_info.placed_address;
   1616       bp->address_space = loc->target_info.placed_address_space;
   1617 
   1618       bp->in_target_beneath = 1;
   1619 
   1620       VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
   1621     }
   1622 }
   1623 
   1624 /* Sync existing breakpoints to record_full_breakpoints.  */
   1625 
   1626 static void
   1627 record_full_init_record_breakpoints (void)
   1628 {
   1629   VEC_free (record_full_breakpoint_p, record_full_breakpoints);
   1630 
   1631   iterate_over_bp_locations (record_full_sync_record_breakpoints);
   1632 }
   1633 
   1634 /* Behavior is conditional on RECORD_FULL_IS_REPLAY.  We will not actually
   1635    insert or remove breakpoints in the real target when replaying, nor
   1636    when recording.  */
   1637 
   1638 static int
   1639 record_full_insert_breakpoint (struct target_ops *ops,
   1640 			       struct gdbarch *gdbarch,
   1641 			       struct bp_target_info *bp_tgt)
   1642 {
   1643   struct record_full_breakpoint *bp;
   1644   int in_target_beneath = 0;
   1645   int ix;
   1646 
   1647   if (!RECORD_FULL_IS_REPLAY)
   1648     {
   1649       /* When recording, we currently always single-step, so we don't
   1650 	 really need to install regular breakpoints in the inferior.
   1651 	 However, we do have to insert software single-step
   1652 	 breakpoints, in case the target can't hardware step.  To keep
   1653 	 things single, we always insert.  */
   1654       struct cleanup *old_cleanups;
   1655       int ret;
   1656 
   1657       old_cleanups = record_full_gdb_operation_disable_set ();
   1658       ret = ops->beneath->to_insert_breakpoint (ops->beneath, gdbarch, bp_tgt);
   1659       do_cleanups (old_cleanups);
   1660 
   1661       if (ret != 0)
   1662 	return ret;
   1663 
   1664       in_target_beneath = 1;
   1665     }
   1666   else
   1667     {
   1668       CORE_ADDR addr = bp_tgt->reqstd_address;
   1669       int bplen;
   1670 
   1671       gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen);
   1672 
   1673       bp_tgt->placed_address = addr;
   1674       bp_tgt->placed_size = bplen;
   1675     }
   1676 
   1677   /* Use the existing entries if found in order to avoid duplication
   1678      in record_full_breakpoints.  */
   1679 
   1680   for (ix = 0;
   1681        VEC_iterate (record_full_breakpoint_p,
   1682 		    record_full_breakpoints, ix, bp);
   1683        ++ix)
   1684     {
   1685       if (bp->addr == bp_tgt->placed_address
   1686 	  && bp->address_space == bp_tgt->placed_address_space)
   1687 	{
   1688 	  gdb_assert (bp->in_target_beneath == in_target_beneath);
   1689 	  return 0;
   1690 	}
   1691     }
   1692 
   1693   bp = XNEW (struct record_full_breakpoint);
   1694   bp->addr = bp_tgt->placed_address;
   1695   bp->address_space = bp_tgt->placed_address_space;
   1696   bp->in_target_beneath = in_target_beneath;
   1697   VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
   1698   return 0;
   1699 }
   1700 
   1701 /* "to_remove_breakpoint" method for process record target.  */
   1702 
   1703 static int
   1704 record_full_remove_breakpoint (struct target_ops *ops,
   1705 			       struct gdbarch *gdbarch,
   1706 			       struct bp_target_info *bp_tgt,
   1707 			       enum remove_bp_reason reason)
   1708 {
   1709   struct record_full_breakpoint *bp;
   1710   int ix;
   1711 
   1712   for (ix = 0;
   1713        VEC_iterate (record_full_breakpoint_p,
   1714 		    record_full_breakpoints, ix, bp);
   1715        ++ix)
   1716     {
   1717       if (bp->addr == bp_tgt->placed_address
   1718 	  && bp->address_space == bp_tgt->placed_address_space)
   1719 	{
   1720 	  if (bp->in_target_beneath)
   1721 	    {
   1722 	      struct cleanup *old_cleanups;
   1723 	      int ret;
   1724 
   1725 	      old_cleanups = record_full_gdb_operation_disable_set ();
   1726 	      ret = ops->beneath->to_remove_breakpoint (ops->beneath, gdbarch,
   1727 							bp_tgt, reason);
   1728 	      do_cleanups (old_cleanups);
   1729 
   1730 	      if (ret != 0)
   1731 		return ret;
   1732 	    }
   1733 
   1734 	  if (reason == REMOVE_BREAKPOINT)
   1735 	    {
   1736 	      VEC_unordered_remove (record_full_breakpoint_p,
   1737 				    record_full_breakpoints, ix);
   1738 	    }
   1739 	  return 0;
   1740 	}
   1741     }
   1742 
   1743   gdb_assert_not_reached ("removing unknown breakpoint");
   1744 }
   1745 
   1746 /* "to_can_execute_reverse" method for process record target.  */
   1747 
   1748 static int
   1749 record_full_can_execute_reverse (struct target_ops *self)
   1750 {
   1751   return 1;
   1752 }
   1753 
   1754 /* "to_get_bookmark" method for process record and prec over core.  */
   1755 
   1756 static gdb_byte *
   1757 record_full_get_bookmark (struct target_ops *self, const char *args,
   1758 			  int from_tty)
   1759 {
   1760   char *ret = NULL;
   1761 
   1762   /* Return stringified form of instruction count.  */
   1763   if (record_full_list && record_full_list->type == record_full_end)
   1764     ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
   1765 
   1766   if (record_debug)
   1767     {
   1768       if (ret)
   1769 	fprintf_unfiltered (gdb_stdlog,
   1770 			    "record_full_get_bookmark returns %s\n", ret);
   1771       else
   1772 	fprintf_unfiltered (gdb_stdlog,
   1773 			    "record_full_get_bookmark returns NULL\n");
   1774     }
   1775   return (gdb_byte *) ret;
   1776 }
   1777 
   1778 /* "to_goto_bookmark" method for process record and prec over core.  */
   1779 
   1780 static void
   1781 record_full_goto_bookmark (struct target_ops *self,
   1782 			   const gdb_byte *raw_bookmark, int from_tty)
   1783 {
   1784   const char *bookmark = (const char *) raw_bookmark;
   1785   struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
   1786 
   1787   if (record_debug)
   1788     fprintf_unfiltered (gdb_stdlog,
   1789 			"record_full_goto_bookmark receives %s\n", bookmark);
   1790 
   1791   if (bookmark[0] == '\'' || bookmark[0] == '\"')
   1792     {
   1793       char *copy;
   1794 
   1795       if (bookmark[strlen (bookmark) - 1] != bookmark[0])
   1796 	error (_("Unbalanced quotes: %s"), bookmark);
   1797 
   1798 
   1799       copy = savestring (bookmark + 1, strlen (bookmark) - 2);
   1800       make_cleanup (xfree, copy);
   1801       bookmark = copy;
   1802     }
   1803 
   1804   record_goto (bookmark);
   1805 
   1806   do_cleanups (cleanup);
   1807 }
   1808 
   1809 static enum exec_direction_kind
   1810 record_full_execution_direction (struct target_ops *self)
   1811 {
   1812   return record_full_execution_dir;
   1813 }
   1814 
   1815 static void
   1816 record_full_info (struct target_ops *self)
   1817 {
   1818   struct record_full_entry *p;
   1819 
   1820   if (RECORD_FULL_IS_REPLAY)
   1821     printf_filtered (_("Replay mode:\n"));
   1822   else
   1823     printf_filtered (_("Record mode:\n"));
   1824 
   1825   /* Find entry for first actual instruction in the log.  */
   1826   for (p = record_full_first.next;
   1827        p != NULL && p->type != record_full_end;
   1828        p = p->next)
   1829     ;
   1830 
   1831   /* Do we have a log at all?  */
   1832   if (p != NULL && p->type == record_full_end)
   1833     {
   1834       /* Display instruction number for first instruction in the log.  */
   1835       printf_filtered (_("Lowest recorded instruction number is %s.\n"),
   1836 		       pulongest (p->u.end.insn_num));
   1837 
   1838       /* If in replay mode, display where we are in the log.  */
   1839       if (RECORD_FULL_IS_REPLAY)
   1840 	printf_filtered (_("Current instruction number is %s.\n"),
   1841 			 pulongest (record_full_list->u.end.insn_num));
   1842 
   1843       /* Display instruction number for last instruction in the log.  */
   1844       printf_filtered (_("Highest recorded instruction number is %s.\n"),
   1845 		       pulongest (record_full_insn_count));
   1846 
   1847       /* Display log count.  */
   1848       printf_filtered (_("Log contains %u instructions.\n"),
   1849 		       record_full_insn_num);
   1850     }
   1851   else
   1852     printf_filtered (_("No instructions have been logged.\n"));
   1853 
   1854   /* Display max log size.  */
   1855   printf_filtered (_("Max logged instructions is %u.\n"),
   1856 		   record_full_insn_max_num);
   1857 }
   1858 
   1859 /* The "to_record_delete" target method.  */
   1860 
   1861 static void
   1862 record_full_delete (struct target_ops *self)
   1863 {
   1864   record_full_list_release_following (record_full_list);
   1865 }
   1866 
   1867 /* The "to_record_is_replaying" target method.  */
   1868 
   1869 static int
   1870 record_full_is_replaying (struct target_ops *self, ptid_t ptid)
   1871 {
   1872   return RECORD_FULL_IS_REPLAY;
   1873 }
   1874 
   1875 /* The "to_record_will_replay" target method.  */
   1876 
   1877 static int
   1878 record_full_will_replay (struct target_ops *self, ptid_t ptid, int dir)
   1879 {
   1880   /* We can currently only record when executing forwards.  Should we be able
   1881      to record when executing backwards on targets that support reverse
   1882      execution, this needs to be changed.  */
   1883 
   1884   return RECORD_FULL_IS_REPLAY || dir == EXEC_REVERSE;
   1885 }
   1886 
   1887 /* Go to a specific entry.  */
   1888 
   1889 static void
   1890 record_full_goto_entry (struct record_full_entry *p)
   1891 {
   1892   if (p == NULL)
   1893     error (_("Target insn not found."));
   1894   else if (p == record_full_list)
   1895     error (_("Already at target insn."));
   1896   else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
   1897     {
   1898       printf_filtered (_("Go forward to insn number %s\n"),
   1899 		       pulongest (p->u.end.insn_num));
   1900       record_full_goto_insn (p, EXEC_FORWARD);
   1901     }
   1902   else
   1903     {
   1904       printf_filtered (_("Go backward to insn number %s\n"),
   1905 		       pulongest (p->u.end.insn_num));
   1906       record_full_goto_insn (p, EXEC_REVERSE);
   1907     }
   1908 
   1909   registers_changed ();
   1910   reinit_frame_cache ();
   1911   stop_pc = regcache_read_pc (get_current_regcache ());
   1912   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
   1913 }
   1914 
   1915 /* The "to_goto_record_begin" target method.  */
   1916 
   1917 static void
   1918 record_full_goto_begin (struct target_ops *self)
   1919 {
   1920   struct record_full_entry *p = NULL;
   1921 
   1922   for (p = &record_full_first; p != NULL; p = p->next)
   1923     if (p->type == record_full_end)
   1924       break;
   1925 
   1926   record_full_goto_entry (p);
   1927 }
   1928 
   1929 /* The "to_goto_record_end" target method.  */
   1930 
   1931 static void
   1932 record_full_goto_end (struct target_ops *self)
   1933 {
   1934   struct record_full_entry *p = NULL;
   1935 
   1936   for (p = record_full_list; p->next != NULL; p = p->next)
   1937     ;
   1938   for (; p!= NULL; p = p->prev)
   1939     if (p->type == record_full_end)
   1940       break;
   1941 
   1942   record_full_goto_entry (p);
   1943 }
   1944 
   1945 /* The "to_goto_record" target method.  */
   1946 
   1947 static void
   1948 record_full_goto (struct target_ops *self, ULONGEST target_insn)
   1949 {
   1950   struct record_full_entry *p = NULL;
   1951 
   1952   for (p = &record_full_first; p != NULL; p = p->next)
   1953     if (p->type == record_full_end && p->u.end.insn_num == target_insn)
   1954       break;
   1955 
   1956   record_full_goto_entry (p);
   1957 }
   1958 
   1959 /* The "to_record_stop_replaying" target method.  */
   1960 
   1961 static void
   1962 record_full_stop_replaying (struct target_ops *self)
   1963 {
   1964   record_full_goto_end (self);
   1965 }
   1966 
   1967 static void
   1968 init_record_full_ops (void)
   1969 {
   1970   record_full_ops.to_shortname = "record-full";
   1971   record_full_ops.to_longname = "Process record and replay target";
   1972   record_full_ops.to_doc =
   1973     "Log program while executing and replay execution from log.";
   1974   record_full_ops.to_open = record_full_open;
   1975   record_full_ops.to_close = record_full_close;
   1976   record_full_ops.to_async = record_full_async;
   1977   record_full_ops.to_resume = record_full_resume;
   1978   record_full_ops.to_wait = record_full_wait;
   1979   record_full_ops.to_disconnect = record_disconnect;
   1980   record_full_ops.to_detach = record_detach;
   1981   record_full_ops.to_mourn_inferior = record_mourn_inferior;
   1982   record_full_ops.to_kill = record_kill;
   1983   record_full_ops.to_store_registers = record_full_store_registers;
   1984   record_full_ops.to_xfer_partial = record_full_xfer_partial;
   1985   record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
   1986   record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
   1987   record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
   1988   record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
   1989   record_full_ops.to_stopped_by_sw_breakpoint
   1990     = record_full_stopped_by_sw_breakpoint;
   1991   record_full_ops.to_supports_stopped_by_sw_breakpoint
   1992     = record_full_supports_stopped_by_sw_breakpoint;
   1993   record_full_ops.to_stopped_by_hw_breakpoint
   1994     = record_full_stopped_by_hw_breakpoint;
   1995   record_full_ops.to_supports_stopped_by_hw_breakpoint
   1996     = record_full_supports_stopped_by_hw_breakpoint;
   1997   record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
   1998   record_full_ops.to_stratum = record_stratum;
   1999   /* Add bookmark target methods.  */
   2000   record_full_ops.to_get_bookmark = record_full_get_bookmark;
   2001   record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
   2002   record_full_ops.to_execution_direction = record_full_execution_direction;
   2003   record_full_ops.to_info_record = record_full_info;
   2004   record_full_ops.to_save_record = record_full_save;
   2005   record_full_ops.to_delete_record = record_full_delete;
   2006   record_full_ops.to_record_is_replaying = record_full_is_replaying;
   2007   record_full_ops.to_record_will_replay = record_full_will_replay;
   2008   record_full_ops.to_record_stop_replaying = record_full_stop_replaying;
   2009   record_full_ops.to_goto_record_begin = record_full_goto_begin;
   2010   record_full_ops.to_goto_record_end = record_full_goto_end;
   2011   record_full_ops.to_goto_record = record_full_goto;
   2012   record_full_ops.to_magic = OPS_MAGIC;
   2013 }
   2014 
   2015 /* "to_resume" method for prec over corefile.  */
   2016 
   2017 static void
   2018 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
   2019 			 enum gdb_signal signal)
   2020 {
   2021   record_full_resume_step = step;
   2022   record_full_resumed = 1;
   2023   record_full_execution_dir = execution_direction;
   2024 
   2025   /* We are about to start executing the inferior (or simulate it),
   2026      let's register it with the event loop.  */
   2027   if (target_can_async_p ())
   2028     target_async (1);
   2029 }
   2030 
   2031 /* "to_kill" method for prec over corefile.  */
   2032 
   2033 static void
   2034 record_full_core_kill (struct target_ops *ops)
   2035 {
   2036   if (record_debug)
   2037     fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
   2038 
   2039   unpush_target (&record_full_core_ops);
   2040 }
   2041 
   2042 /* "to_fetch_registers" method for prec over corefile.  */
   2043 
   2044 static void
   2045 record_full_core_fetch_registers (struct target_ops *ops,
   2046 				  struct regcache *regcache,
   2047 				  int regno)
   2048 {
   2049   if (regno < 0)
   2050     {
   2051       int num = gdbarch_num_regs (get_regcache_arch (regcache));
   2052       int i;
   2053 
   2054       for (i = 0; i < num; i ++)
   2055         regcache_raw_supply (regcache, i,
   2056                              record_full_core_regbuf + MAX_REGISTER_SIZE * i);
   2057     }
   2058   else
   2059     regcache_raw_supply (regcache, regno,
   2060                          record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
   2061 }
   2062 
   2063 /* "to_prepare_to_store" method for prec over corefile.  */
   2064 
   2065 static void
   2066 record_full_core_prepare_to_store (struct target_ops *self,
   2067 				   struct regcache *regcache)
   2068 {
   2069 }
   2070 
   2071 /* "to_store_registers" method for prec over corefile.  */
   2072 
   2073 static void
   2074 record_full_core_store_registers (struct target_ops *ops,
   2075                              struct regcache *regcache,
   2076                              int regno)
   2077 {
   2078   if (record_full_gdb_operation_disable)
   2079     regcache_raw_collect (regcache, regno,
   2080                           record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
   2081   else
   2082     error (_("You can't do that without a process to debug."));
   2083 }
   2084 
   2085 /* "to_xfer_partial" method for prec over corefile.  */
   2086 
   2087 static enum target_xfer_status
   2088 record_full_core_xfer_partial (struct target_ops *ops,
   2089 			       enum target_object object,
   2090 			       const char *annex, gdb_byte *readbuf,
   2091 			       const gdb_byte *writebuf, ULONGEST offset,
   2092 			       ULONGEST len, ULONGEST *xfered_len)
   2093 {
   2094   if (object == TARGET_OBJECT_MEMORY)
   2095     {
   2096       if (record_full_gdb_operation_disable || !writebuf)
   2097 	{
   2098 	  struct target_section *p;
   2099 
   2100 	  for (p = record_full_core_start; p < record_full_core_end; p++)
   2101 	    {
   2102 	      if (offset >= p->addr)
   2103 		{
   2104 		  struct record_full_core_buf_entry *entry;
   2105 		  ULONGEST sec_offset;
   2106 
   2107 		  if (offset >= p->endaddr)
   2108 		    continue;
   2109 
   2110 		  if (offset + len > p->endaddr)
   2111 		    len = p->endaddr - offset;
   2112 
   2113 		  sec_offset = offset - p->addr;
   2114 
   2115 		  /* Read readbuf or write writebuf p, offset, len.  */
   2116 		  /* Check flags.  */
   2117 		  if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
   2118 		      || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
   2119 		    {
   2120 		      if (readbuf)
   2121 			memset (readbuf, 0, len);
   2122 
   2123 		      *xfered_len = len;
   2124 		      return TARGET_XFER_OK;
   2125 		    }
   2126 		  /* Get record_full_core_buf_entry.  */
   2127 		  for (entry = record_full_core_buf_list; entry;
   2128 		       entry = entry->prev)
   2129 		    if (entry->p == p)
   2130 		      break;
   2131 		  if (writebuf)
   2132 		    {
   2133 		      if (!entry)
   2134 			{
   2135 			  /* Add a new entry.  */
   2136 			  entry = XNEW (struct record_full_core_buf_entry);
   2137 			  entry->p = p;
   2138 			  if (!bfd_malloc_and_get_section
   2139 			        (p->the_bfd_section->owner,
   2140 				 p->the_bfd_section,
   2141 				 &entry->buf))
   2142 			    {
   2143 			      xfree (entry);
   2144 			      return TARGET_XFER_EOF;
   2145 			    }
   2146 			  entry->prev = record_full_core_buf_list;
   2147 			  record_full_core_buf_list = entry;
   2148 			}
   2149 
   2150 		      memcpy (entry->buf + sec_offset, writebuf,
   2151 			      (size_t) len);
   2152 		    }
   2153 		  else
   2154 		    {
   2155 		      if (!entry)
   2156 			return ops->beneath->to_xfer_partial (ops->beneath,
   2157 							      object, annex,
   2158 							      readbuf, writebuf,
   2159 							      offset, len,
   2160 							      xfered_len);
   2161 
   2162 		      memcpy (readbuf, entry->buf + sec_offset,
   2163 			      (size_t) len);
   2164 		    }
   2165 
   2166 		  *xfered_len = len;
   2167 		  return TARGET_XFER_OK;
   2168 		}
   2169 	    }
   2170 
   2171 	  return TARGET_XFER_E_IO;
   2172 	}
   2173       else
   2174 	error (_("You can't do that without a process to debug."));
   2175     }
   2176 
   2177   return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
   2178 					readbuf, writebuf, offset, len,
   2179 					xfered_len);
   2180 }
   2181 
   2182 /* "to_insert_breakpoint" method for prec over corefile.  */
   2183 
   2184 static int
   2185 record_full_core_insert_breakpoint (struct target_ops *ops,
   2186 				    struct gdbarch *gdbarch,
   2187 				    struct bp_target_info *bp_tgt)
   2188 {
   2189   return 0;
   2190 }
   2191 
   2192 /* "to_remove_breakpoint" method for prec over corefile.  */
   2193 
   2194 static int
   2195 record_full_core_remove_breakpoint (struct target_ops *ops,
   2196 				    struct gdbarch *gdbarch,
   2197 				    struct bp_target_info *bp_tgt,
   2198 				    enum remove_bp_reason reason)
   2199 {
   2200   return 0;
   2201 }
   2202 
   2203 /* "to_has_execution" method for prec over corefile.  */
   2204 
   2205 static int
   2206 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
   2207 {
   2208   return 1;
   2209 }
   2210 
   2211 static void
   2212 init_record_full_core_ops (void)
   2213 {
   2214   record_full_core_ops.to_shortname = "record-core";
   2215   record_full_core_ops.to_longname = "Process record and replay target";
   2216   record_full_core_ops.to_doc =
   2217     "Log program while executing and replay execution from log.";
   2218   record_full_core_ops.to_open = record_full_open;
   2219   record_full_core_ops.to_close = record_full_close;
   2220   record_full_core_ops.to_async = record_full_async;
   2221   record_full_core_ops.to_resume = record_full_core_resume;
   2222   record_full_core_ops.to_wait = record_full_wait;
   2223   record_full_core_ops.to_kill = record_full_core_kill;
   2224   record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
   2225   record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
   2226   record_full_core_ops.to_store_registers = record_full_core_store_registers;
   2227   record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
   2228   record_full_core_ops.to_insert_breakpoint
   2229     = record_full_core_insert_breakpoint;
   2230   record_full_core_ops.to_remove_breakpoint
   2231     = record_full_core_remove_breakpoint;
   2232   record_full_core_ops.to_stopped_by_watchpoint
   2233     = record_full_stopped_by_watchpoint;
   2234   record_full_core_ops.to_stopped_data_address
   2235     = record_full_stopped_data_address;
   2236   record_full_core_ops.to_stopped_by_sw_breakpoint
   2237     = record_full_stopped_by_sw_breakpoint;
   2238   record_full_core_ops.to_supports_stopped_by_sw_breakpoint
   2239     = record_full_supports_stopped_by_sw_breakpoint;
   2240   record_full_core_ops.to_stopped_by_hw_breakpoint
   2241     = record_full_stopped_by_hw_breakpoint;
   2242   record_full_core_ops.to_supports_stopped_by_hw_breakpoint
   2243     = record_full_supports_stopped_by_hw_breakpoint;
   2244   record_full_core_ops.to_can_execute_reverse
   2245     = record_full_can_execute_reverse;
   2246   record_full_core_ops.to_has_execution = record_full_core_has_execution;
   2247   record_full_core_ops.to_stratum = record_stratum;
   2248   /* Add bookmark target methods.  */
   2249   record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
   2250   record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
   2251   record_full_core_ops.to_execution_direction
   2252     = record_full_execution_direction;
   2253   record_full_core_ops.to_info_record = record_full_info;
   2254   record_full_core_ops.to_delete_record = record_full_delete;
   2255   record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
   2256   record_full_core_ops.to_record_will_replay = record_full_will_replay;
   2257   record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
   2258   record_full_core_ops.to_goto_record_end = record_full_goto_end;
   2259   record_full_core_ops.to_goto_record = record_full_goto;
   2260   record_full_core_ops.to_magic = OPS_MAGIC;
   2261 }
   2262 
   2263 /* Record log save-file format
   2264    Version 1 (never released)
   2265 
   2266    Header:
   2267      4 bytes: magic number htonl(0x20090829).
   2268        NOTE: be sure to change whenever this file format changes!
   2269 
   2270    Records:
   2271      record_full_end:
   2272        1 byte:  record type (record_full_end, see enum record_full_type).
   2273      record_full_reg:
   2274        1 byte:  record type (record_full_reg, see enum record_full_type).
   2275        8 bytes: register id (network byte order).
   2276        MAX_REGISTER_SIZE bytes: register value.
   2277      record_full_mem:
   2278        1 byte:  record type (record_full_mem, see enum record_full_type).
   2279        8 bytes: memory length (network byte order).
   2280        8 bytes: memory address (network byte order).
   2281        n bytes: memory value (n == memory length).
   2282 
   2283    Version 2
   2284      4 bytes: magic number netorder32(0x20091016).
   2285        NOTE: be sure to change whenever this file format changes!
   2286 
   2287    Records:
   2288      record_full_end:
   2289        1 byte:  record type (record_full_end, see enum record_full_type).
   2290        4 bytes: signal
   2291        4 bytes: instruction count
   2292      record_full_reg:
   2293        1 byte:  record type (record_full_reg, see enum record_full_type).
   2294        4 bytes: register id (network byte order).
   2295        n bytes: register value (n == actual register size).
   2296                 (eg. 4 bytes for x86 general registers).
   2297      record_full_mem:
   2298        1 byte:  record type (record_full_mem, see enum record_full_type).
   2299        4 bytes: memory length (network byte order).
   2300        8 bytes: memory address (network byte order).
   2301        n bytes: memory value (n == memory length).
   2302 
   2303 */
   2304 
   2305 /* bfdcore_read -- read bytes from a core file section.  */
   2306 
   2307 static inline void
   2308 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
   2309 {
   2310   int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
   2311 
   2312   if (ret)
   2313     *offset += len;
   2314   else
   2315     error (_("Failed to read %d bytes from core file %s ('%s')."),
   2316 	   len, bfd_get_filename (obfd),
   2317 	   bfd_errmsg (bfd_get_error ()));
   2318 }
   2319 
   2320 static inline uint64_t
   2321 netorder64 (uint64_t input)
   2322 {
   2323   uint64_t ret;
   2324 
   2325   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
   2326 			  BFD_ENDIAN_BIG, input);
   2327   return ret;
   2328 }
   2329 
   2330 static inline uint32_t
   2331 netorder32 (uint32_t input)
   2332 {
   2333   uint32_t ret;
   2334 
   2335   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
   2336 			  BFD_ENDIAN_BIG, input);
   2337   return ret;
   2338 }
   2339 
   2340 static inline uint16_t
   2341 netorder16 (uint16_t input)
   2342 {
   2343   uint16_t ret;
   2344 
   2345   store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
   2346 			  BFD_ENDIAN_BIG, input);
   2347   return ret;
   2348 }
   2349 
   2350 /* Restore the execution log from a core_bfd file.  */
   2351 static void
   2352 record_full_restore (void)
   2353 {
   2354   uint32_t magic;
   2355   struct cleanup *old_cleanups;
   2356   struct record_full_entry *rec;
   2357   asection *osec;
   2358   uint32_t osec_size;
   2359   int bfd_offset = 0;
   2360   struct regcache *regcache;
   2361 
   2362   /* We restore the execution log from the open core bfd,
   2363      if there is one.  */
   2364   if (core_bfd == NULL)
   2365     return;
   2366 
   2367   /* "record_full_restore" can only be called when record list is empty.  */
   2368   gdb_assert (record_full_first.next == NULL);
   2369 
   2370   if (record_debug)
   2371     fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
   2372 
   2373   /* Now need to find our special note section.  */
   2374   osec = bfd_get_section_by_name (core_bfd, "null0");
   2375   if (record_debug)
   2376     fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
   2377 			osec ? "succeeded" : "failed");
   2378   if (osec == NULL)
   2379     return;
   2380   osec_size = bfd_section_size (core_bfd, osec);
   2381   if (record_debug)
   2382     fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
   2383 
   2384   /* Check the magic code.  */
   2385   bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
   2386   if (magic != RECORD_FULL_FILE_MAGIC)
   2387     error (_("Version mis-match or file format error in core file %s."),
   2388 	   bfd_get_filename (core_bfd));
   2389   if (record_debug)
   2390     fprintf_unfiltered (gdb_stdlog,
   2391 			"  Reading 4-byte magic cookie "
   2392 			"RECORD_FULL_FILE_MAGIC (0x%s)\n",
   2393 			phex_nz (netorder32 (magic), 4));
   2394 
   2395   /* Restore the entries in recfd into record_full_arch_list_head and
   2396      record_full_arch_list_tail.  */
   2397   record_full_arch_list_head = NULL;
   2398   record_full_arch_list_tail = NULL;
   2399   record_full_insn_num = 0;
   2400   old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
   2401   regcache = get_current_regcache ();
   2402 
   2403   while (1)
   2404     {
   2405       uint8_t rectype;
   2406       uint32_t regnum, len, signal, count;
   2407       uint64_t addr;
   2408 
   2409       /* We are finished when offset reaches osec_size.  */
   2410       if (bfd_offset >= osec_size)
   2411 	break;
   2412       bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
   2413 
   2414       switch (rectype)
   2415         {
   2416         case record_full_reg: /* reg */
   2417           /* Get register number to regnum.  */
   2418           bfdcore_read (core_bfd, osec, &regnum,
   2419 			sizeof (regnum), &bfd_offset);
   2420 	  regnum = netorder32 (regnum);
   2421 
   2422           rec = record_full_reg_alloc (regcache, regnum);
   2423 
   2424           /* Get val.  */
   2425           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
   2426 			rec->u.reg.len, &bfd_offset);
   2427 
   2428 	  if (record_debug)
   2429 	    fprintf_unfiltered (gdb_stdlog,
   2430 				"  Reading register %d (1 "
   2431 				"plus %lu plus %d bytes)\n",
   2432 				rec->u.reg.num,
   2433 				(unsigned long) sizeof (regnum),
   2434 				rec->u.reg.len);
   2435           break;
   2436 
   2437         case record_full_mem: /* mem */
   2438           /* Get len.  */
   2439           bfdcore_read (core_bfd, osec, &len,
   2440 			sizeof (len), &bfd_offset);
   2441 	  len = netorder32 (len);
   2442 
   2443           /* Get addr.  */
   2444           bfdcore_read (core_bfd, osec, &addr,
   2445 			sizeof (addr), &bfd_offset);
   2446 	  addr = netorder64 (addr);
   2447 
   2448           rec = record_full_mem_alloc (addr, len);
   2449 
   2450           /* Get val.  */
   2451           bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
   2452 			rec->u.mem.len, &bfd_offset);
   2453 
   2454 	  if (record_debug)
   2455 	    fprintf_unfiltered (gdb_stdlog,
   2456 				"  Reading memory %s (1 plus "
   2457 				"%lu plus %lu plus %d bytes)\n",
   2458 				paddress (get_current_arch (),
   2459 					  rec->u.mem.addr),
   2460 				(unsigned long) sizeof (addr),
   2461 				(unsigned long) sizeof (len),
   2462 				rec->u.mem.len);
   2463           break;
   2464 
   2465         case record_full_end: /* end */
   2466           rec = record_full_end_alloc ();
   2467           record_full_insn_num ++;
   2468 
   2469 	  /* Get signal value.  */
   2470 	  bfdcore_read (core_bfd, osec, &signal,
   2471 			sizeof (signal), &bfd_offset);
   2472 	  signal = netorder32 (signal);
   2473 	  rec->u.end.sigval = (enum gdb_signal) signal;
   2474 
   2475 	  /* Get insn count.  */
   2476 	  bfdcore_read (core_bfd, osec, &count,
   2477 			sizeof (count), &bfd_offset);
   2478 	  count = netorder32 (count);
   2479 	  rec->u.end.insn_num = count;
   2480 	  record_full_insn_count = count + 1;
   2481 	  if (record_debug)
   2482 	    fprintf_unfiltered (gdb_stdlog,
   2483 				"  Reading record_full_end (1 + "
   2484 				"%lu + %lu bytes), offset == %s\n",
   2485 				(unsigned long) sizeof (signal),
   2486 				(unsigned long) sizeof (count),
   2487 				paddress (get_current_arch (),
   2488 					  bfd_offset));
   2489           break;
   2490 
   2491         default:
   2492           error (_("Bad entry type in core file %s."),
   2493 		 bfd_get_filename (core_bfd));
   2494           break;
   2495         }
   2496 
   2497       /* Add rec to record arch list.  */
   2498       record_full_arch_list_add (rec);
   2499     }
   2500 
   2501   discard_cleanups (old_cleanups);
   2502 
   2503   /* Add record_full_arch_list_head to the end of record list.  */
   2504   record_full_first.next = record_full_arch_list_head;
   2505   record_full_arch_list_head->prev = &record_full_first;
   2506   record_full_arch_list_tail->next = NULL;
   2507   record_full_list = &record_full_first;
   2508 
   2509   /* Update record_full_insn_max_num.  */
   2510   if (record_full_insn_num > record_full_insn_max_num)
   2511     {
   2512       record_full_insn_max_num = record_full_insn_num;
   2513       warning (_("Auto increase record/replay buffer limit to %u."),
   2514                record_full_insn_max_num);
   2515     }
   2516 
   2517   /* Succeeded.  */
   2518   printf_filtered (_("Restored records from core file %s.\n"),
   2519 		   bfd_get_filename (core_bfd));
   2520 
   2521   print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
   2522 }
   2523 
   2524 /* bfdcore_write -- write bytes into a core file section.  */
   2525 
   2526 static inline void
   2527 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
   2528 {
   2529   int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
   2530 
   2531   if (ret)
   2532     *offset += len;
   2533   else
   2534     error (_("Failed to write %d bytes to core file %s ('%s')."),
   2535 	   len, bfd_get_filename (obfd),
   2536 	   bfd_errmsg (bfd_get_error ()));
   2537 }
   2538 
   2539 /* Restore the execution log from a file.  We use a modified elf
   2540    corefile format, with an extra section for our data.  */
   2541 
   2542 static void
   2543 cmd_record_full_restore (char *args, int from_tty)
   2544 {
   2545   core_file_command (args, from_tty);
   2546   record_full_open (args, from_tty);
   2547 }
   2548 
   2549 static void
   2550 record_full_save_cleanups (void *data)
   2551 {
   2552   bfd *obfd = (bfd *) data;
   2553   char *pathname = xstrdup (bfd_get_filename (obfd));
   2554 
   2555   gdb_bfd_unref (obfd);
   2556   unlink (pathname);
   2557   xfree (pathname);
   2558 }
   2559 
   2560 /* Save the execution log to a file.  We use a modified elf corefile
   2561    format, with an extra section for our data.  */
   2562 
   2563 static void
   2564 record_full_save (struct target_ops *self, const char *recfilename)
   2565 {
   2566   struct record_full_entry *cur_record_full_list;
   2567   uint32_t magic;
   2568   struct regcache *regcache;
   2569   struct gdbarch *gdbarch;
   2570   struct cleanup *old_cleanups;
   2571   struct cleanup *set_cleanups;
   2572   bfd *obfd;
   2573   int save_size = 0;
   2574   asection *osec = NULL;
   2575   int bfd_offset = 0;
   2576 
   2577   /* Open the save file.  */
   2578   if (record_debug)
   2579     fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
   2580 			recfilename);
   2581 
   2582   /* Open the output file.  */
   2583   obfd = create_gcore_bfd (recfilename);
   2584   old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
   2585 
   2586   /* Save the current record entry to "cur_record_full_list".  */
   2587   cur_record_full_list = record_full_list;
   2588 
   2589   /* Get the values of regcache and gdbarch.  */
   2590   regcache = get_current_regcache ();
   2591   gdbarch = get_regcache_arch (regcache);
   2592 
   2593   /* Disable the GDB operation record.  */
   2594   set_cleanups = record_full_gdb_operation_disable_set ();
   2595 
   2596   /* Reverse execute to the begin of record list.  */
   2597   while (1)
   2598     {
   2599       /* Check for beginning and end of log.  */
   2600       if (record_full_list == &record_full_first)
   2601         break;
   2602 
   2603       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2604 
   2605       if (record_full_list->prev)
   2606         record_full_list = record_full_list->prev;
   2607     }
   2608 
   2609   /* Compute the size needed for the extra bfd section.  */
   2610   save_size = 4;	/* magic cookie */
   2611   for (record_full_list = record_full_first.next; record_full_list;
   2612        record_full_list = record_full_list->next)
   2613     switch (record_full_list->type)
   2614       {
   2615       case record_full_end:
   2616 	save_size += 1 + 4 + 4;
   2617 	break;
   2618       case record_full_reg:
   2619 	save_size += 1 + 4 + record_full_list->u.reg.len;
   2620 	break;
   2621       case record_full_mem:
   2622 	save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
   2623 	break;
   2624       }
   2625 
   2626   /* Make the new bfd section.  */
   2627   osec = bfd_make_section_anyway_with_flags (obfd, "precord",
   2628                                              SEC_HAS_CONTENTS
   2629                                              | SEC_READONLY);
   2630   if (osec == NULL)
   2631     error (_("Failed to create 'precord' section for corefile %s: %s"),
   2632 	   recfilename,
   2633            bfd_errmsg (bfd_get_error ()));
   2634   bfd_set_section_size (obfd, osec, save_size);
   2635   bfd_set_section_vma (obfd, osec, 0);
   2636   bfd_set_section_alignment (obfd, osec, 0);
   2637   bfd_section_lma (obfd, osec) = 0;
   2638 
   2639   /* Save corefile state.  */
   2640   write_gcore_file (obfd);
   2641 
   2642   /* Write out the record log.  */
   2643   /* Write the magic code.  */
   2644   magic = RECORD_FULL_FILE_MAGIC;
   2645   if (record_debug)
   2646     fprintf_unfiltered (gdb_stdlog,
   2647 			"  Writing 4-byte magic cookie "
   2648 			"RECORD_FULL_FILE_MAGIC (0x%s)\n",
   2649 		      phex_nz (magic, 4));
   2650   bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
   2651 
   2652   /* Save the entries to recfd and forward execute to the end of
   2653      record list.  */
   2654   record_full_list = &record_full_first;
   2655   while (1)
   2656     {
   2657       /* Save entry.  */
   2658       if (record_full_list != &record_full_first)
   2659         {
   2660 	  uint8_t type;
   2661 	  uint32_t regnum, len, signal, count;
   2662           uint64_t addr;
   2663 
   2664 	  type = record_full_list->type;
   2665           bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
   2666 
   2667           switch (record_full_list->type)
   2668             {
   2669             case record_full_reg: /* reg */
   2670 	      if (record_debug)
   2671 		fprintf_unfiltered (gdb_stdlog,
   2672 				    "  Writing register %d (1 "
   2673 				    "plus %lu plus %d bytes)\n",
   2674 				    record_full_list->u.reg.num,
   2675 				    (unsigned long) sizeof (regnum),
   2676 				    record_full_list->u.reg.len);
   2677 
   2678               /* Write regnum.  */
   2679               regnum = netorder32 (record_full_list->u.reg.num);
   2680               bfdcore_write (obfd, osec, &regnum,
   2681 			     sizeof (regnum), &bfd_offset);
   2682 
   2683               /* Write regval.  */
   2684               bfdcore_write (obfd, osec,
   2685 			     record_full_get_loc (record_full_list),
   2686 			     record_full_list->u.reg.len, &bfd_offset);
   2687               break;
   2688 
   2689             case record_full_mem: /* mem */
   2690 	      if (record_debug)
   2691 		fprintf_unfiltered (gdb_stdlog,
   2692 				    "  Writing memory %s (1 plus "
   2693 				    "%lu plus %lu plus %d bytes)\n",
   2694 				    paddress (gdbarch,
   2695 					      record_full_list->u.mem.addr),
   2696 				    (unsigned long) sizeof (addr),
   2697 				    (unsigned long) sizeof (len),
   2698 				    record_full_list->u.mem.len);
   2699 
   2700 	      /* Write memlen.  */
   2701 	      len = netorder32 (record_full_list->u.mem.len);
   2702 	      bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
   2703 
   2704 	      /* Write memaddr.  */
   2705 	      addr = netorder64 (record_full_list->u.mem.addr);
   2706 	      bfdcore_write (obfd, osec, &addr,
   2707 			     sizeof (addr), &bfd_offset);
   2708 
   2709 	      /* Write memval.  */
   2710 	      bfdcore_write (obfd, osec,
   2711 			     record_full_get_loc (record_full_list),
   2712 			     record_full_list->u.mem.len, &bfd_offset);
   2713               break;
   2714 
   2715               case record_full_end:
   2716 		if (record_debug)
   2717 		  fprintf_unfiltered (gdb_stdlog,
   2718 				      "  Writing record_full_end (1 + "
   2719 				      "%lu + %lu bytes)\n",
   2720 				      (unsigned long) sizeof (signal),
   2721 				      (unsigned long) sizeof (count));
   2722 		/* Write signal value.  */
   2723 		signal = netorder32 (record_full_list->u.end.sigval);
   2724 		bfdcore_write (obfd, osec, &signal,
   2725 			       sizeof (signal), &bfd_offset);
   2726 
   2727 		/* Write insn count.  */
   2728 		count = netorder32 (record_full_list->u.end.insn_num);
   2729 		bfdcore_write (obfd, osec, &count,
   2730 			       sizeof (count), &bfd_offset);
   2731                 break;
   2732             }
   2733         }
   2734 
   2735       /* Execute entry.  */
   2736       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2737 
   2738       if (record_full_list->next)
   2739         record_full_list = record_full_list->next;
   2740       else
   2741         break;
   2742     }
   2743 
   2744   /* Reverse execute to cur_record_full_list.  */
   2745   while (1)
   2746     {
   2747       /* Check for beginning and end of log.  */
   2748       if (record_full_list == cur_record_full_list)
   2749         break;
   2750 
   2751       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2752 
   2753       if (record_full_list->prev)
   2754         record_full_list = record_full_list->prev;
   2755     }
   2756 
   2757   do_cleanups (set_cleanups);
   2758   gdb_bfd_unref (obfd);
   2759   discard_cleanups (old_cleanups);
   2760 
   2761   /* Succeeded.  */
   2762   printf_filtered (_("Saved core file %s with execution log.\n"),
   2763 		   recfilename);
   2764 }
   2765 
   2766 /* record_full_goto_insn -- rewind the record log (forward or backward,
   2767    depending on DIR) to the given entry, changing the program state
   2768    correspondingly.  */
   2769 
   2770 static void
   2771 record_full_goto_insn (struct record_full_entry *entry,
   2772 		       enum exec_direction_kind dir)
   2773 {
   2774   struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
   2775   struct regcache *regcache = get_current_regcache ();
   2776   struct gdbarch *gdbarch = get_regcache_arch (regcache);
   2777 
   2778   /* Assume everything is valid: we will hit the entry,
   2779      and we will not hit the end of the recording.  */
   2780 
   2781   if (dir == EXEC_FORWARD)
   2782     record_full_list = record_full_list->next;
   2783 
   2784   do
   2785     {
   2786       record_full_exec_insn (regcache, gdbarch, record_full_list);
   2787       if (dir == EXEC_REVERSE)
   2788 	record_full_list = record_full_list->prev;
   2789       else
   2790 	record_full_list = record_full_list->next;
   2791     } while (record_full_list != entry);
   2792   do_cleanups (set_cleanups);
   2793 }
   2794 
   2795 /* Alias for "target record-full".  */
   2796 
   2797 static void
   2798 cmd_record_full_start (char *args, int from_tty)
   2799 {
   2800   execute_command ("target record-full", from_tty);
   2801 }
   2802 
   2803 static void
   2804 set_record_full_insn_max_num (char *args, int from_tty,
   2805 			      struct cmd_list_element *c)
   2806 {
   2807   if (record_full_insn_num > record_full_insn_max_num)
   2808     {
   2809       /* Count down record_full_insn_num while releasing records from list.  */
   2810       while (record_full_insn_num > record_full_insn_max_num)
   2811        {
   2812          record_full_list_release_first ();
   2813          record_full_insn_num--;
   2814        }
   2815     }
   2816 }
   2817 
   2818 /* The "set record full" command.  */
   2819 
   2820 static void
   2821 set_record_full_command (char *args, int from_tty)
   2822 {
   2823   printf_unfiltered (_("\"set record full\" must be followed "
   2824 		       "by an apporpriate subcommand.\n"));
   2825   help_list (set_record_full_cmdlist, "set record full ", all_commands,
   2826 	     gdb_stdout);
   2827 }
   2828 
   2829 /* The "show record full" command.  */
   2830 
   2831 static void
   2832 show_record_full_command (char *args, int from_tty)
   2833 {
   2834   cmd_show_list (show_record_full_cmdlist, from_tty, "");
   2835 }
   2836 
   2837 /* Provide a prototype to silence -Wmissing-prototypes.  */
   2838 extern initialize_file_ftype _initialize_record_full;
   2839 
   2840 void
   2841 _initialize_record_full (void)
   2842 {
   2843   struct cmd_list_element *c;
   2844 
   2845   /* Init record_full_first.  */
   2846   record_full_first.prev = NULL;
   2847   record_full_first.next = NULL;
   2848   record_full_first.type = record_full_end;
   2849 
   2850   init_record_full_ops ();
   2851   add_target (&record_full_ops);
   2852   add_deprecated_target_alias (&record_full_ops, "record");
   2853   init_record_full_core_ops ();
   2854   add_target (&record_full_core_ops);
   2855 
   2856   add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
   2857 		  _("Start full execution recording."), &record_full_cmdlist,
   2858 		  "record full ", 0, &record_cmdlist);
   2859 
   2860   c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
   2861 	       _("Restore the execution log from a file.\n\
   2862 Argument is filename.  File must be created with 'record save'."),
   2863 	       &record_full_cmdlist);
   2864   set_cmd_completer (c, filename_completer);
   2865 
   2866   /* Deprecate the old version without "full" prefix.  */
   2867   c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
   2868 		     &record_cmdlist);
   2869   set_cmd_completer (c, filename_completer);
   2870   deprecate_cmd (c, "record full restore");
   2871 
   2872   add_prefix_cmd ("full", class_support, set_record_full_command,
   2873 		  _("Set record options"), &set_record_full_cmdlist,
   2874 		  "set record full ", 0, &set_record_cmdlist);
   2875 
   2876   add_prefix_cmd ("full", class_support, show_record_full_command,
   2877 		  _("Show record options"), &show_record_full_cmdlist,
   2878 		  "show record full ", 0, &show_record_cmdlist);
   2879 
   2880   /* Record instructions number limit command.  */
   2881   add_setshow_boolean_cmd ("stop-at-limit", no_class,
   2882 			   &record_full_stop_at_limit, _("\
   2883 Set whether record/replay stops when record/replay buffer becomes full."), _("\
   2884 Show whether record/replay stops when record/replay buffer becomes full."),
   2885 			   _("Default is ON.\n\
   2886 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
   2887 When OFF, if the record/replay buffer becomes full,\n\
   2888 delete the oldest recorded instruction to make room for each new one."),
   2889 			   NULL, NULL,
   2890 			   &set_record_full_cmdlist, &show_record_full_cmdlist);
   2891 
   2892   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
   2893 		     &set_record_cmdlist);
   2894   deprecate_cmd (c, "set record full stop-at-limit");
   2895 
   2896   c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
   2897 		     &show_record_cmdlist);
   2898   deprecate_cmd (c, "show record full stop-at-limit");
   2899 
   2900   add_setshow_uinteger_cmd ("insn-number-max", no_class,
   2901 			    &record_full_insn_max_num,
   2902 			    _("Set record/replay buffer limit."),
   2903 			    _("Show record/replay buffer limit."), _("\
   2904 Set the maximum number of instructions to be stored in the\n\
   2905 record/replay buffer.  A value of either \"unlimited\" or zero means no\n\
   2906 limit.  Default is 200000."),
   2907 			    set_record_full_insn_max_num,
   2908 			    NULL, &set_record_full_cmdlist,
   2909 			    &show_record_full_cmdlist);
   2910 
   2911   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
   2912 		     &set_record_cmdlist);
   2913   deprecate_cmd (c, "set record full insn-number-max");
   2914 
   2915   c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
   2916 		     &show_record_cmdlist);
   2917   deprecate_cmd (c, "show record full insn-number-max");
   2918 
   2919   add_setshow_boolean_cmd ("memory-query", no_class,
   2920 			   &record_full_memory_query, _("\
   2921 Set whether query if PREC cannot record memory change of next instruction."),
   2922                            _("\
   2923 Show whether query if PREC cannot record memory change of next instruction."),
   2924                            _("\
   2925 Default is OFF.\n\
   2926 When ON, query if PREC cannot record memory change of next instruction."),
   2927 			   NULL, NULL,
   2928 			   &set_record_full_cmdlist,
   2929 			   &show_record_full_cmdlist);
   2930 
   2931   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
   2932 		     &set_record_cmdlist);
   2933   deprecate_cmd (c, "set record full memory-query");
   2934 
   2935   c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
   2936 		     &show_record_cmdlist);
   2937   deprecate_cmd (c, "show record full memory-query");
   2938 }
   2939