Home | History | Annotate | Line # | Download | only in ppc
idecode_expression.h revision 1.1.1.1.8.1
      1 /*  This file is part of the program psim.
      2 
      3     Copyright 1994, 1995, 1996, 1997, 2003 Andrew Cagney
      4 
      5     This program is free software; you can redistribute it and/or modify
      6     it under the terms of the GNU General Public License as published by
      7     the Free Software Foundation; either version 3 of the License, or
      8     (at your option) any later version.
      9 
     10     This program is distributed in the hope that it will be useful,
     11     but WITHOUT ANY WARRANTY; without even the implied warranty of
     12     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     13     GNU General Public License for more details.
     14 
     15     You should have received a copy of the GNU General Public License
     16     along with this program; if not, see <http://www.gnu.org/licenses/>.
     17 
     18     */
     19 
     20 /* Additional, and optional expressions.  */
     21 #ifdef WITH_ALTIVEC
     22 #include "altivec_expression.h"
     23 #endif
     24 #ifdef WITH_E500
     25 #include "e500_expression.h"
     26 #endif
     27 
     28 /* 32bit target expressions:
     29 
     30    Each calculation is performed three times using each of the
     31    signed64, unsigned64 and long integer types.  The macro ALU_END
     32    (in _ALU_RESULT_VAL) then selects which of the three alternative
     33    results will be used in the final assignment of the target
     34    register.  As this selection is determined at compile time by
     35    fields in the instruction (OE, EA, Rc) the compiler has sufficient
     36    information to firstly simplify the selection code into a single
     37    case and then back anotate the equations and hence eliminate any
     38    resulting dead code.  That dead code being the calculations that,
     39    as it turned out were not in the end needed.
     40 
     41    64bit arrithemetic is used firstly because it allows the use of
     42    gcc's efficient long long operators (typically efficiently output
     43    inline) and secondly because the resultant answer will contain in
     44    the low 32bits the answer while in the high 32bits is either carry
     45    or status information. */
     46 
     47 /* 64bit target expressions:
     48 
     49    Unfortunatly 128bit arrithemetic isn't that common.  Consequently
     50    the 32/64 bit trick can not be used.  Instead all calculations are
     51    required to retain carry/overflow information in separate
     52    variables.  Even with this restriction it is still possible for the
     53    trick of letting the compiler discard the calculation of unneeded
     54    values */
     55 
     56 
     57 /* Macro's to type cast 32bit constants to 64bits */
     58 #define SIGNED64(val)   ((signed64)(signed32)(val))
     59 #define UNSIGNED64(val) ((unsigned64)(unsigned32)(val))
     60 
     61 
     62 /* Start a section of ALU code */
     63 
     64 #define ALU_BEGIN(val) \
     65 { \
     66   natural_word alu_val; \
     67   unsigned64 alu_carry_val; \
     68   signed64 alu_overflow_val; \
     69   ALU_SET(val)
     70 
     71 
     72 /* assign the result to the target register */
     73 
     74 #define ALU_END(TARG,CA,OE,Rc) \
     75 { /* select the result to use */ \
     76   signed_word const alu_result = _ALU_RESULT_VAL(CA,OE,Rc); \
     77   /* determine the overflow bit if needed */ \
     78   if (OE) { \
     79     if ((((unsigned64)(alu_overflow_val & BIT64(0))) \
     80 	 >> 32) \
     81         == (alu_overflow_val & BIT64(32))) \
     82       XER &= (~xer_overflow); \
     83     else \
     84       XER |= (xer_summary_overflow | xer_overflow); \
     85   } \
     86   /* Update the carry bit if needed */ \
     87   if (CA) { \
     88     XER = ((XER & ~xer_carry) \
     89            | SHUFFLED32((alu_carry_val >> 32), 31, xer_carry_bit)); \
     90     /* if (alu_carry_val & BIT64(31)) \
     91          XER |= (xer_carry); \
     92        else \
     93          XER &= (~xer_carry); */ \
     94   } \
     95   TRACE(trace_alu, (" Result = %ld (0x%lx), XER = %ld\n", \
     96                     (long)alu_result, (long)alu_result, (long)XER)); \
     97   /* Update the Result Conditions if needed */ \
     98   CR0_COMPARE(alu_result, 0, Rc); \
     99   /* assign targ same */ \
    100   TARG = alu_result; \
    101 }}
    102 
    103 /* select the result from the different options */
    104 
    105 #define _ALU_RESULT_VAL(CA,OE,Rc) (WITH_TARGET_WORD_BITSIZE == 64 \
    106 				   ? alu_val \
    107 				   : (OE \
    108 				      ? alu_overflow_val \
    109 				      : (CA \
    110 					 ? alu_carry_val \
    111 					 : alu_val)))
    112 
    113 
    114 /* More basic alu operations */
    115 #if (WITH_TARGET_WORD_BITSIZE == 64)
    116 #define ALU_SET(val) \
    117 do { \
    118   alu_val = val; \
    119   alu_carry_val = ((unsigned64)alu_val) >> 32; \
    120   alu_overflow_val = ((signed64)alu_val) >> 32; \
    121 } while (0)
    122 #endif
    123 #if (WITH_TARGET_WORD_BITSIZE == 32)
    124 #define ALU_SET(val) \
    125 do { \
    126   alu_val = val; \
    127   alu_carry_val = (unsigned32)(alu_val); \
    128   alu_overflow_val = (signed32)(alu_val); \
    129 } while (0)
    130 #endif
    131 
    132 #if (WITH_TARGET_WORD_BITSIZE == 64)
    133 #define ALU_ADD(val) \
    134 do { \
    135   unsigned64 alu_lo = (UNSIGNED64(alu_val) \
    136 		       + UNSIGNED64(val)); \
    137   signed alu_carry = ((alu_lo & BIT(31)) != 0); \
    138   alu_carry_val = (alu_carry_val \
    139 		   + UNSIGNED64(EXTRACTED(val, 0, 31)) \
    140 		   + alu_carry); \
    141   alu_overflow_val = (alu_overflow_val \
    142 		      + SIGNED64(EXTRACTED(val, 0, 31)) \
    143 		      + alu_carry); \
    144   alu_val = alu_val + val; \
    145 } while (0)
    146 #endif
    147 #if (WITH_TARGET_WORD_BITSIZE == 32)
    148 #define ALU_ADD(val) \
    149 do { \
    150   alu_val += val; \
    151   alu_carry_val += (unsigned32)(val); \
    152   alu_overflow_val += (signed32)(val); \
    153 } while (0)
    154 #endif
    155 
    156 
    157 #if (WITH_TARGET_WORD_BITSIZE == 64)
    158 #define ALU_ADD_CA \
    159 do { \
    160   signed carry = MASKED32(XER, xer_carry_bit, xer_carry_bit) != 0; \
    161   ALU_ADD(carry); \
    162 } while (0)
    163 #endif
    164 #if (WITH_TARGET_WORD_BITSIZE == 32)
    165 #define ALU_ADD_CA \
    166 do { \
    167   signed carry = MASKED32(XER, xer_carry_bit, xer_carry_bit) != 0; \
    168   ALU_ADD(carry); \
    169 } while (0)
    170 #endif
    171 
    172 
    173 #if 0
    174 #if (WITH_TARGET_WORD_BITSIZE == 64)
    175 #endif
    176 #if (WITH_TARGET_WORD_BITSIZE == 32)
    177 #define ALU_SUB(val) \
    178 do { \
    179   alu_val -= val; \
    180   alu_carry_val -= (unsigned32)(val); \
    181   alu_overflow_val -= (signed32)(val); \
    182 } while (0)
    183 #endif
    184 #endif
    185 
    186 #if (WITH_TARGET_WORD_BITSIZE == 64)
    187 #endif
    188 #if (WITH_TARGET_WORD_BITSIZE == 32)
    189 #define ALU_OR(val) \
    190 do { \
    191   alu_val |= val; \
    192   alu_carry_val = (unsigned32)(alu_val); \
    193   alu_overflow_val = (signed32)(alu_val); \
    194 } while (0)
    195 #endif
    196 
    197 
    198 #if (WITH_TARGET_WORD_BITSIZE == 64)
    199 #endif
    200 #if (WITH_TARGET_WORD_BITSIZE == 32)
    201 #define ALU_XOR(val) \
    202 do { \
    203   alu_val ^= val; \
    204   alu_carry_val = (unsigned32)(alu_val); \
    205   alu_overflow_val = (signed32)(alu_val); \
    206 } while (0)
    207 #endif
    208 
    209 
    210 #if 0
    211 #if (WITH_TARGET_WORD_BITSIZE == 64)
    212 #endif
    213 #if (WITH_TARGET_WORD_BITSIZE == 32)
    214 #define ALU_NEGATE \
    215 do { \
    216   alu_val = -alu_val; \
    217   alu_carry_val = -alu_carry_val; \
    218   alu_overflow_val = -alu_overflow_val; \
    219 } while(0)
    220 #endif
    221 #endif
    222 
    223 
    224 #if (WITH_TARGET_WORD_BITSIZE == 64)
    225 #endif
    226 #if (WITH_TARGET_WORD_BITSIZE == 32)
    227 #define ALU_AND(val) \
    228 do { \
    229   alu_val &= val; \
    230   alu_carry_val = (unsigned32)(alu_val); \
    231   alu_overflow_val = (signed32)(alu_val); \
    232 } while (0)
    233 #endif
    234 
    235 
    236 #if (WITH_TARGET_WORD_BITSIZE == 64)
    237 #define ALU_NOT \
    238 do { \
    239   signed64 new_alu_val = ~alu_val; \
    240   ALU_SET(new_alu_val); \
    241 } while (0)
    242 #endif
    243 #if (WITH_TARGET_WORD_BITSIZE == 32)
    244 #define ALU_NOT \
    245 do { \
    246   signed new_alu_val = ~alu_val; \
    247   ALU_SET(new_alu_val); \
    248 } while(0)
    249 #endif
    250 
    251 
    252 /* Macros for updating the condition register */
    253 
    254 #define CR1_UPDATE(Rc) \
    255 do { \
    256   if (Rc) { \
    257     CR_SET(1, EXTRACTED32(FPSCR, fpscr_fx_bit, fpscr_ox_bit)); \
    258   } \
    259 } while (0)
    260 
    261 
    262 #define _DO_CR_COMPARE(LHS, RHS) \
    263 (((LHS) < (RHS)) \
    264  ? cr_i_negative \
    265  : (((LHS) > (RHS)) \
    266     ? cr_i_positive \
    267     : cr_i_zero))
    268 
    269 #define CR_SET(REG, VAL) MBLIT32(CR, REG*4, REG*4+3, VAL)
    270 #define CR_FIELD(REG) EXTRACTED32(CR, REG*4, REG*4+3)
    271 #define CR_SET_XER_SO(REG, VAL) \
    272 do { \
    273   creg new_bits = ((XER & xer_summary_overflow) \
    274                    ? (cr_i_summary_overflow | VAL) \
    275                    : VAL); \
    276   CR_SET(REG, new_bits); \
    277 } while(0)
    278 
    279 #define CR_COMPARE(REG, LHS, RHS) \
    280 do { \
    281   creg new_bits = ((XER & xer_summary_overflow) \
    282                    ? (cr_i_summary_overflow | _DO_CR_COMPARE(LHS,RHS)) \
    283                    : _DO_CR_COMPARE(LHS,RHS)); \
    284   CR_SET(REG, new_bits); \
    285 } while (0)
    286 
    287 #define CR0_COMPARE(LHS, RHS, Rc) \
    288 do { \
    289   if (Rc) { \
    290     CR_COMPARE(0, LHS, RHS); \
    291     TRACE(trace_alu, \
    292 	  ("CR=0x%08lx, LHS=%ld, RHS=%ld\n", \
    293 	   (unsigned long)CR, (long)LHS, (long)RHS)); \
    294   } \
    295 } while (0)
    296 
    297 
    298 
    299 /* Bring data in from the cold */
    300 
    301 #define MEM(SIGN, EA, NR_BYTES) \
    302 ((SIGN##_##NR_BYTES) vm_data_map_read_##NR_BYTES(cpu_data_map(processor), EA, \
    303 						 processor, cia)) \
    304 
    305 #define STORE(EA, NR_BYTES, VAL) \
    306 do { \
    307   vm_data_map_write_##NR_BYTES(cpu_data_map(processor), EA, VAL, \
    308 			       processor, cia); \
    309 } while (0)
    310 
    311 
    312 
    313 /* some FPSCR update macros. */
    314 
    315 #define FPSCR_BEGIN \
    316 { \
    317   fpscreg old_fpscr UNUSED = FPSCR
    318 
    319 #define FPSCR_END(Rc) { \
    320   /* always update VX */ \
    321   if ((FPSCR & fpscr_vx_bits)) \
    322     FPSCR |= fpscr_vx; \
    323   else \
    324     FPSCR &= ~fpscr_vx; \
    325   /* always update FEX */ \
    326   if (((FPSCR & fpscr_vx) && (FPSCR & fpscr_ve)) \
    327       || ((FPSCR & fpscr_ox) && (FPSCR & fpscr_oe)) \
    328       || ((FPSCR & fpscr_ux) && (FPSCR & fpscr_ue)) \
    329       || ((FPSCR & fpscr_zx) && (FPSCR & fpscr_ze)) \
    330       || ((FPSCR & fpscr_xx) && (FPSCR & fpscr_xe))) \
    331     FPSCR |= fpscr_fex; \
    332   else \
    333     FPSCR &= ~fpscr_fex; \
    334   CR1_UPDATE(Rc); \
    335   /* interrupt enabled? */ \
    336   if ((MSR & (msr_floating_point_exception_mode_0 \
    337               | msr_floating_point_exception_mode_1)) \
    338       && (FPSCR & fpscr_fex)) \
    339     program_interrupt(processor, cia, \
    340                       floating_point_enabled_program_interrupt); \
    341 }}
    342 
    343 #define FPSCR_SET(REG, VAL) MBLIT32(FPSCR, REG*4, REG*4+3, VAL)
    344 #define FPSCR_FIELD(REG) EXTRACTED32(FPSCR, REG*4, REG*4+3)
    345 
    346 #define FPSCR_SET_FPCC(VAL) MBLIT32(FPSCR, fpscr_fpcc_bit, fpscr_fpcc_bit+3, VAL)
    347 
    348 /* Handle various exceptions */
    349 
    350 #define FPSCR_OR_VX(VAL) \
    351 do { \
    352   /* NOTE: VAL != 0 */ \
    353   FPSCR |= (VAL); \
    354   FPSCR |= fpscr_fx; \
    355 } while (0)
    356 
    357 #define FPSCR_SET_OX(COND) \
    358 do { \
    359   if (COND) { \
    360     FPSCR |= fpscr_ox; \
    361     FPSCR |= fpscr_fx; \
    362   } \
    363   else \
    364     FPSCR &= ~fpscr_ox; \
    365 } while (0)
    366 
    367 #define FPSCR_SET_UX(COND) \
    368 do { \
    369   if (COND) { \
    370     FPSCR |= fpscr_ux; \
    371     FPSCR |= fpscr_fx; \
    372   } \
    373   else \
    374     FPSCR &= ~fpscr_ux; \
    375 } while (0)
    376 
    377 #define FPSCR_SET_ZX(COND) \
    378 do { \
    379   if (COND) { \
    380     FPSCR |= fpscr_zx; \
    381     FPSCR |= fpscr_fx; \
    382   } \
    383   else \
    384     FPSCR &= ~fpscr_zx; \
    385 } while (0)
    386 
    387 #define FPSCR_SET_XX(COND) \
    388 do { \
    389   if (COND) { \
    390     FPSCR |= fpscr_xx; \
    391     FPSCR |= fpscr_fx; \
    392   } \
    393 } while (0)
    394 
    395 /* Note: code using SET_FI must also explicitly call SET_XX */
    396 
    397 #define FPSCR_SET_FR(COND) do { \
    398   if (COND) \
    399     FPSCR |= fpscr_fr; \
    400   else \
    401     FPSCR &= ~fpscr_fr; \
    402 } while (0)
    403 
    404 #define FPSCR_SET_FI(COND) \
    405 do { \
    406   if (COND) { \
    407     FPSCR |= fpscr_fi; \
    408   } \
    409   else \
    410     FPSCR &= ~fpscr_fi; \
    411 } while (0)
    412 
    413 #define FPSCR_SET_FPRF(VAL) \
    414 do { \
    415   FPSCR = (FPSCR & ~fpscr_fprf) | (VAL); \
    416 } while (0)
    417