xref: /src/external/ibm-public/postfix/dist/postfix-install

#!/bin/sh

# To view the formatted manual page of this file, type:
#	POSTFIXSOURCE/mantools/srctoman - postfix-install | nroff -man

#++
# NAME
#	postfix-install 1
# SUMMARY
#	Postfix installation procedure
# SYNOPSIS
#	sh postfix-install [options] [name=value] ...
# DESCRIPTION
#	The postfix-install script is to be run from the top-level
#	Postfix source directory. It implements the following operations:
# .IP o
#	Install or upgrade Postfix from source code. This requires
#	super-user privileges.
# .IP o
#	Build a package that can be distributed to other systems, in order
#	to install or upgrade Postfix elsewhere. This requires no super-user
#	privileges. To complete the installation after unpacking the
#	package, execute as super-user the post-install script in the Postfix
#	configuration directory.
# .PP
#	The postfix-install script is controlled by installation parameters.
#	Specific parameters are described at the end of this document.
#
#	By default, postfix-install asks the user for installation
#	parameter settings. Most settings are stored in the installed
#	main.cf file. Stored settings are used as site-specific defaults
#	when the postfix-install script is run later.
#
#	The names of Postfix files and directories, as well as their
#	ownerships and permissions, are stored in the postfix-files file
#	in the Postfix configuration directory. This information is used
#	by the post-install script (also in the configuration directory)
#	for creating missing queue directories when Postfix is started,
#	and for setting correct ownership and permissions when Postfix
#	is installed from a pre-built package or from source code.
#
#	Arguments
# .IP -non-interactive
#	Do not ask the user for parameter settings. Installation parameters
#	are specified via one of the non-interactive methods described
#	below.
# .IP -package
#	Build a ready-to-install package. This requires that a
#	non-default install_root parameter is specified.
# INSTALLATION PARAMETER INPUT METHODS
# .ad
# .fi
#	Parameter settings can be specified through a variety of
#	mechanisms.  In order of decreasing precedence these are:
# .IP "interactive mode"
#	By default, postfix-install will ask the user for installation
#	parameter settings. These settings have the highest precedence.
# .IP "command line"
#	Parameter settings can be given as name=value arguments on
#	the postfix-install command line.
# .IP "process environment"
#	Parameter settings can be given as name=value environment
#	variables. Environment parameters can also be specified on the
#	make(1) command line as "make install name=value ...".
# .IP "installed configuration files"
#	If a parameter is not specified via the command line or via the
#	process environment, postfix-install will attempt to extract its
#	value from an already installed Postfix main.cf configuration file.
# .IP "built-in defaults"
#	These settings have the lowest precedence.
# INSTALLATION PARAMETER DESCRIPTION
# .ad
# .fi
#	The description of installation parameters and their built-in
#	default settings is as follows:
# .IP install_root
#	Prefix that is prepended to the pathnames of installed files.
#	Specify this ONLY when creating pre-built packages for distribution to
#	other systems. The built-in default is "/", the local root directory.
#	This parameter setting is not recorded in the installed main.cf file.
# .IP tempdir
#	Directory for scratch files while installing Postfix.
#	You must have write permission in this directory.
#	The built-in default directory name is the current directory.
#	This parameter setting is not recorded in the installed main.cf file.
# .IP config_directory
#	The final destination directory for Postfix configuration files.
#	The built-in default directory name is /etc/postfix.
#	This parameter setting is not recorded in the installed main.cf file
#	and can be changed only by recompiling Postfix.
# .IP data_directory
#	The final destination directory for Postfix-writable data files such
#	as caches. This directory should not be shared with non-Postfix
#	software. The built-in default directory name is /var/lib/postfix.
#	This parameter setting is recorded in the installed main.cf file.
# .IP daemon_directory
#	The final destination directory for Postfix daemon programs. This
#	directory should not be in the command search path of any users.
#	The built-in default directory name is /usr/libexec/postfix.
#	This parameter setting is recorded in the installed main.cf file.
# .IP command_directory
#	The final destination directory for Postfix administrative commands.
#	This directory should be in the command search path of adminstrative
#	users. The built-in default directory name is system dependent.
#	This parameter setting is recorded in the installed main.cf file.
# .IP html_directory
#	The final destination directory for the Postfix HTML files.
#	This parameter setting is recorded in the installed main.cf file.
# .IP queue_directory
#	The final destination directory for Postfix queues.
#	The built-in default directory name is /var/spool/postfix.
#	This parameter setting is recorded in the installed main.cf file.
# .IP sendmail_path
#	The final destination pathname for the Postfix sendmail command.
#	This is the Sendmail-compatible mail posting interface.
#	The built-in default pathname is system dependent.
#	This parameter setting is recorded in the installed main.cf file.
# .IP newaliases_path
#	The final destination pathname for the Postfix newaliases command.
#	This is the Sendmail-compatible command to build alias databases
#	for the Postfix local delivery agent.
#	The built-in default pathname is system dependent.
#	This parameter setting is recorded in the installed main.cf file.
# .IP mailq_path
#	The final destination pathname for the Postfix mailq command.
#	This is the Sendmail-compatible command to list the mail queue.
#	The built-in default pathname is system dependent.
#	This parameter setting is recorded in the installed main.cf file.
# .IP mail_owner
#	The owner of the Postfix queue. Its numerical user ID and group ID
#	must not be used by any other accounts on the system.
#	The built-in default account name is postfix.
#	This parameter setting is recorded in the installed main.cf file.
# .IP setgid_group
#	The group for mail submission and for queue management commands.
#	Its numerical group ID must not be used by any other accounts on the
#	system, not even by the mail_owner account.
#	The built-in default group name is postdrop.
#	This parameter setting is recorded in the installed main.cf file.
# .IP manpage_directory
#	The final destination directory for the Postfix on-line manual pages.
#	This parameter setting is recorded in the installed main.cf file.
# .IP sample_directory
#	The final destination directory for the Postfix sample configuration
#	files. This parameter is obsolete as of Postfix version 2.1.
#	This parameter setting is recorded in the installed main.cf file.
# .IP readme_directory
#	The final destination directory for the Postfix README files.
#	This parameter setting is recorded in the installed main.cf file.
# SEE ALSO
#	post-install(1) post-installation procedure
# FILES
#	$config_directory/main.cf, Postfix installation configuration.
#	$daemon_directory/postfix-files, installation control file.
#	$config_directory/install.cf, obsolete configuration file.
# LICENSE
# .ad
# .fi
#	The Secure Mailer license must be distributed with this software.
# AUTHOR(S)
#	Wietse Venema
#	IBM T.J. Watson Research
#	P.O. Box 704
#	Yorktown Heights, NY 10598, USA
#--

# Initialize.
# By now, shells must have functions. Ultrix users must use sh5 or lose.

umask 022
PATH=/bin:/usr/bin:/usr/sbin:/usr/etc:/sbin:/etc:/usr/contrib/bin:/usr/gnu/bin:/usr/ucb:/usr/bsd
SHELL=/bin/sh
IFS=" 	
"
BACKUP_IFS="$IFS"

# This script uses outputs from Postfix and non-Postfix commands.
# Override all LC_* settings and LANG for robustness.
LC_ALL=C; export LC_ALL

USAGE="Usage: $0 [name=value] [option]
    -non-interactive        Do not ask for installation parameters.
    -package                Build a ready-to-install package.
    name=value              Specify an installation parameter".

# Process command-line options and parameter settings. Work around
# brain damaged shells. "IFS=value command" should not make the
# IFS=value setting permanent. But some broken standard allows it.

for arg
do
    case $arg in
      *=*) IFS= eval $arg; IFS="$BACKUP_IFS";;
-non-int*) non_interactive=1;;
 -package) need_install_root=install_root;;
        *) echo "$0: Error: $USAGE" 1>&2; exit 1;;
    esac
    shift
done

# Sanity checks.

test -z "$non_interactive" -a ! -t 0 && {
    echo $0: Error: for non-interactive use, run: \"$0 -non-interactive\" 1>&2
    exit 1
}

test -x bin/postconf || {
    echo $0: Error: no bin/postconf file. Did you forget to run \"make\"? 1>&2
    exit 1
}

case `uname -s` in
HP-UX*) FMT=cat;;
     *) FMT=fmt;;
esac

# Disclaimer.

test -z "$non_interactive" && cat <<EOF | ${FMT}

    Warning: if you use this script to install Postfix locally,
    this script will replace existing sendmail or Postfix programs.
    Make backups if you want to be able to recover.

    Before installing files, this script prompts you for some
    definitions.  Most definitions will be remembered, so you have
    to specify them only once. All definitions should have a
    reasonable default value.
EOF

# The following shell functions replace files/symlinks while minimizing
# the time that a file does not exist, and avoid copying over files
# in order to not disturb running programs. That is certainly desirable
# when upgrading Postfix on a live machine. It also avoids surprises
# when building a Postfix package for distribution to other systems.

compare_or_replace() {
    mode=$1
    owner=$2
    group=$3
    src=$4
    dst=$5
    (cmp $src $dst >/dev/null 2>&1 && echo Skipping $dst...) || {
	echo Updating $dst...
	rm -f $tempdir/junk || exit 1
	cp $src $tempdir/junk || exit 1
	mv -f $tempdir/junk $dst || exit 1
	test -z "$owner" || chown $owner $dst || exit 1
	test -z "$group" || chgrp $group $dst || exit 1
	chmod $mode $dst || exit 1
    }
}

compare_or_symlink() {
    (cmp $1 $2 >/dev/null 2>&1 && echo Skipping $2...) || {
	echo Updating $2...
	rm -f $tempdir/junk || exit 1
	dest=`echo $1 | sed '
	    s;^'$install_root';;
	    s;/\./;/;g
	    s;//*;/;g
	    s;^/;;
	'`
	link=`echo $2 | sed '
	    s;^'$install_root';;
	    s;/\./;/;g
	    s;//*;/;g
	    s;^/;;
	    s;/[^/]*$;/;
	    s;[^/]*/;../;g
	    s;$;'$dest';
	'`
	ln -s $link $tempdir/junk || exit 1
	mv -f $tempdir/junk $2 || {
	    echo $0: Error: your mv command has trouble renaming symlinks. 1>&2
	    echo If you run Linux, upgrade to GNU fileutils-4.0 or better, 1>&2
	    echo or choose a tempdir that is in the same file system as $2. 1>&2
	    echo If you run FreeBSD, upgrade to version 5 or better. 1>&2
	    exit 1
	}
    }
}

compare_or_hardlink() {
    (cmp $1 $2 >/dev/null 2>&1 && echo Skipping $2...) || {
	echo Updating $2...
	rm -f $2 || exit 1
	ln $1 $2 || exit 1
    }
}

check_parent() {
    for path
    do
	dir=`echo $path|sed -e 's/[/][/]*[^/]*$//' -e 's/^$/\//'`
	test -d $dir || mkdir -p $dir || exit 1
    done
}

# How to supress newlines in echo.

case `echo -n` in
"") n=-n; c=;;
 *) n=; c='\c';;
esac

# Prompts.

install_root_prompt="the prefix for installed file names. Specify
this ONLY if you are building ready-to-install packages for
distribution to OTHER machines. See PACKAGE_README for instructions."

tempdir_prompt="a directory for scratch files while installing
Postfix.  You must have write permission in this directory."

config_directory_prompt="the final destination directory for
installed Postfix configuration files."

data_directory_prompt="the final destination directory for
Postfix-writable data files such as caches or random numbers.  This
directory should not be shared with non-Postfix software."

daemon_directory_prompt="the final destination directory for
installed Postfix daemon programs.  This directory should not be
in the command search path of any users."

command_directory_prompt="the final destination directory for
installed Postfix administrative commands.  This directory should
be in the command search path of adminstrative users."

queue_directory_prompt="the final destination directory for Postfix
queues."

sendmail_path_prompt="the final destination pathname for the
installed Postfix sendmail command. This is the Sendmail-compatible
mail posting interface."

newaliases_path_prompt="the final destination pathname for the
installed Postfix newaliases command.  This is the Sendmail-compatible
command to build alias databases for the Postfix local delivery
agent."

mailq_path_prompt="the final destination pathname for the installed
Postfix mailq command.  This is the Sendmail-compatible mail queue
listing command."

mail_owner_prompt="the owner of the Postfix queue. Specify an
account with numerical user ID and group ID values that are not
used by any other accounts on the system."

setgid_group_prompt="the group for mail submission and for queue
management commands.  Specify a group name with a numerical group
ID that is not shared with other accounts, not even with the Postfix
mail_owner account. You can no longer specify \"no\" here."

manpage_directory_prompt="the final destination directory for the
Postfix on-line manual pages. You can no longer specify \"no\"
here."

readme_directory_prompt="the final destination directory for the Postfix
README files. Specify \"no\" if you do not want to install these files."

html_directory_prompt="the final destination directory for the Postfix
HTML files. Specify \"no\" if you do not want to install these files."

# Default settings, just to get started.

: ${install_root=/}
: ${tempdir=`pwd`}
: ${config_directory=`bin/postconf -c conf -h -d config_directory`}

# Find out the location of installed configuration files.

test -z "$non_interactive" && for name in install_root tempdir config_directory
do
    while :
    do
	echo
	eval echo Please specify \$${name}_prompt | ${FMT}
	eval echo \$n "$name: [\$$name]\  \$c"
	read ans
	case $ans in
	"") break;;
	 *) case $ans in
	    /*) eval $name=$ans; break;;
	     *) echo; echo $0: Error: $name should be an absolute path name. 1>&2;;
	    esac;;
	esac
    done
done

# In case some systems special-case pathnames beginning with //.

case $install_root in
/) install_root=
esac

test -z "$need_install_root" || test -n "$install_root" || {
    echo $0: Error: invalid package root directory: \"install_root=/\" 1>&2
    exit 1
}

CONFIG_DIRECTORY=$install_root$config_directory

# If a parameter is not set via the command line or environment,
# try to use settings from installed configuration files.

# Extract parameter settings from the obsolete install.cf file, as
# a transitional aid.

grep setgid_group $CONFIG_DIRECTORY/main.cf >/dev/null 2>&1 || {
    test -f $CONFIG_DIRECTORY/install.cf && {
	for name in sendmail_path newaliases_path mailq_path setgid manpages
	do
	    eval junk=\$$name
	    case "$junk" in
	    "") eval unset $name;;
	    esac
	    eval : \${$name="\`. $CONFIG_DIRECTORY/install.cf; echo \$$name\`"} \
		|| exit 1
	done
	: ${setgid_group=$setgid}
	: ${manpage_directory=$manpages}
    }
}

CONFIG_PARAMS="command_directory daemon_directory data_directory \
html_directory mail_owner mailq_path  manpage_directory newaliases_path \
queue_directory readme_directory sendmail_path setgid_group"

# Extract parameter settings from the installed main.cf file.

test -f $CONFIG_DIRECTORY/main.cf && {
    for name in $CONFIG_PARAMS sample_directory
    do
	eval junk=\$$name
	case "$junk" in
	"") eval unset $name;;
	esac
	eval : \${$name=\`bin/postconf -c $CONFIG_DIRECTORY -h $name\`} ||
	    exit 1
    done
}

# Use built-in defaults as the final source of parameter settings.

for name in $CONFIG_PARAMS sample_directory
do
    eval junk=\$$name
    case "$junk" in
    "") eval unset $name;;
    esac
    eval : \${$name=\`bin/postconf -c conf -d -h $name\`} || exit 1
done

# Override settings manually.

test -z "$non_interactive" && for name in $CONFIG_PARAMS
do
    while :
    do
	echo
	eval echo Please specify \$${name}_prompt | ${FMT}
	eval echo \$n "$name: [\$$name]\  \$c"
	read ans
	case $ans in
	"") break;;
	 *) eval $name=$ans; break;;
	esac
    done
done

# Sanity checks

case "$setgid_group" in
 no) (echo $0: Error: the setgid_group parameter no longer accepts 
     echo \"no\" values. Try again with \"setgid_group=groupname\" on the 
     echo command line or execute \"make install\" and specify setgid_group
     echo interactively.) | ${FMT} 1>&2
     exit 1;;
esac

case "$manpage_directory" in
 no) (echo $0: Error: the manpage_directory parameter no longer accepts 
     echo \"no\" values.  Try again with \"manpage_directory=/path/name\" 
     echo on the command line or execute \"make install\" and specify
     echo manpage_directory interactively.) | ${FMT} 1>&2
     exit 1;;
esac

for path in "$html_directory" "$readme_directory"
do
   case "$path" in
   /*) ;;
   no) ;;
    *) echo $0: Error: \"$path\" should be \"no\" or an absolute path name. 1>&2
       exit 1;;
   esac
done

for path in "$daemon_directory" "$data_directory" "$command_directory" "$queue_directory" \
    "$sendmail_path" "$newaliases_path" "$mailq_path" "$manpage_directory"
do
   case "$path" in
   /*) ;;
    *) echo $0: Error: \"$path\" should be an absolute path name. 1>&2; exit 1;;
   esac
done

for path in mailq_path newaliases_path sendmail_path
do
    eval test -d $install_root\$$path && {
	echo $0: Error: \"$path\" specifies a directory. 1>&2
	exit 1
    }
done

for path in command_directory config_directory daemon_directory data_directory \
    manpage_directory queue_directory html_directory readme_directory
do
    eval test -f $install_root\$$path && {
	echo $0: Error: \"$path\" specifies a regular file. 1>&2
	exit 1
    }
done

test -d $tempdir || mkdir -p $tempdir || exit 1

trap "rm -f $tempdir/junk" 0 1 2 3 15

( rm -f $tempdir/junk && touch $tempdir/junk ) || {
    echo $0: Error: you have no write permission to $tempdir. 1>&2
    echo Specify an alternative directory for scratch files. 1>&2
    exit 1
}

test -z "$install_root" && {

    chown root $tempdir/junk >/dev/null 2>&1 || {
	echo Error: you have no permission to change file ownership. 1>&2
	exit 1
    }

    chown "$mail_owner" $tempdir/junk >/dev/null 2>&1 || {
	echo $0: Error: \"$mail_owner\" needs an entry in the passwd file. 1>&2
	echo Remember, \"$mail_owner\" needs a dedicated user and group id. 1>&2
	exit 1
    }

    chgrp "$setgid_group" $tempdir/junk >/dev/null 2>&1 || {
	echo $0: Error: \"$setgid_group\" needs an entry in the group file. 1>&2
	echo Remember, \"$setgid_group\" needs a dedicated group id. 1>&2
	exit 1
    }

}

rm -f $tempdir/junk || exit 1

trap 0 1 2 3 15

# Avoid clumsiness.

DAEMON_DIRECTORY=$install_root$daemon_directory
COMMAND_DIRECTORY=$install_root$command_directory
QUEUE_DIRECTORY=$install_root$queue_directory
SENDMAIL_PATH=$install_root$sendmail_path
HTML_DIRECTORY=$install_root$html_directory
MANPAGE_DIRECTORY=$install_root$manpage_directory
README_DIRECTORY=$install_root$readme_directory

# Avoid repeated tests for existence of these; default permissions suffice.

test -d $DAEMON_DIRECTORY || mkdir -p $DAEMON_DIRECTORY || exit 1
test -d $COMMAND_DIRECTORY || mkdir -p $COMMAND_DIRECTORY || exit 1
test -d $COMMAND_DIRECTORY || mkdir -p $COMMAND_DIRECTORY || exit 1
test "$html_directory" = "no" -o -d $HTML_DIRECTORY || 
	mkdir -p $HTML_DIRECTORY || exit 1
test "$readme_directory" = "no" -o -d $README_DIRECTORY || 
	mkdir -p $README_DIRECTORY || exit 1

# Upgrade or first-time installation?

if [ -f $CONFIG_DIRECTORY/main.cf ]
then
    post_install_options="upgrade-source"
else
    post_install_options="first-install"
fi

# Install files, using information from the postfix-files file.

exec < libexec/postfix-files || exit 1
while IFS=: read path type owner group mode flags junk
do
    IFS="$BACKUP_IFS"

    # Skip comments.

    case $path in
    [$]*) ;;
       *) continue;;
    esac

    # Skip over files that ought to be removed.
    # Leave it up to post-install to report them to the user.

    case $flags in
    *o*) continue
    esac

    # Skip over files that must be preserved.

    case $flags in
    *p*) eval test -f $install_root$path && {
	    eval echo "Skipping $install_root$path..."
	    continue
	 };;
    esac

    # Save source path before it is clobbered.

    case $type in
    [hl]) eval source=$owner;;
    esac

    # If installing from source code, apply special permissions or ownership.
    # If building a package, don't apply special permissions or ownership.

    case $install_root in
    "") case $owner in
	[$]*) eval owner=$owner;;
	root) owner=;;
	esac
	case $group in
	[$]*) eval group=$group;;
	   -) group=;;
	esac;;
     *) case $mode in
	[1-7]755) mode=755;;
	esac
	owner=
	group=;;
    esac


    case $type in

     # Create/update directory.

     d) eval path=$install_root$path
	test "$path" = "${install_root}no" -o -d $path || {
	    mkdir -p $path || exit 1
	    test -z "$owner" || chown $owner $path || exit 1
	    test -z "$group" || chgrp $group $path || exit 1
	    chmod $mode $path || exit 1
	}
	continue;;

     # Create/update regular file.

     f) echo $path | (IFS=/ read prefix file; IFS="$BACKUP_IFS"
	case $prefix in
	'$daemon_directory')
	    compare_or_replace $mode "$owner" "$group" libexec/$file \
		$DAEMON_DIRECTORY/$file || exit 1;;
	'$command_directory')
	    compare_or_replace $mode "$owner" "$group" bin/$file \
		$COMMAND_DIRECTORY/$file || exit 1;;
	'$config_directory')
	    compare_or_replace $mode "$owner" "$group" conf/$file \
		$CONFIG_DIRECTORY/$file || exit 1;;
	'$sendmail_path')
	    check_parent $SENDMAIL_PATH || exit 1
	    compare_or_replace $mode "$owner" "$group" bin/sendmail \
		$SENDMAIL_PATH || exit 1;;
	'$html_directory')
	    test "$html_directory" = "no" ||
		compare_or_replace $mode "$owner" "$group" html/$file \
		    $HTML_DIRECTORY/$file || exit 1;;
	'$manpage_directory')
	    check_parent $MANPAGE_DIRECTORY/$file || exit 1
	    compare_or_replace $mode "$owner" "$group" man/$file \
		$MANPAGE_DIRECTORY/$file || exit 1;;
	'$readme_directory')
	    test "$readme_directory" = "no" ||
		compare_or_replace $mode "$owner" "$group" README_FILES/$file \
		    $README_DIRECTORY/$file || exit 1;;
	 *) echo $0: Error: unknown entry $path in libexec/postfix-files 1>&2
	    exit 1;;
	esac) || exit 1
	continue;;

     # Hard link. Skip files that are not installed.

     h) eval echo $path | (
	    IFS=/ read prefix file; IFS="$BACKUP_IFS"
	    test "$prefix" = "no" || (
		eval dest_path=$install_root$path
		check_parent $dest_path || exit 1
		eval source_path=$install_root$source
		compare_or_hardlink $source_path $dest_path || exit 1
	    )
	) || exit 1
	continue;;

     # Symbolic link. Skip files that are not installed.

     l) eval echo $path | (
	    IFS=/ read prefix file; IFS="$BACKUP_IFS"
	    test "$prefix" = "no" || (
		eval dest_path=$install_root$path
		check_parent $dest_path || exit 1
		eval source_path=$install_root$source
		compare_or_symlink $source_path $dest_path || exit 1
	    )
	) || exit 1
	continue;;

     *) echo $0: Error: unknown type $type for $path in libexec/postfix-files 1>&2
	exit 1;;
    esac

    done

# Save the installation parameters to main.cf even when they haven't
# changed from their current default. Defaults can change between
# Postfix releases, and software should not suddenly be installed in
# the wrong place when Postfix is being upgraded.

bin/postconf -c $CONFIG_DIRECTORY -e \
    "daemon_directory = $daemon_directory" \
    "data_directory = $data_directory" \
    "command_directory = $command_directory" \
    "queue_directory = $queue_directory" \
    "mail_owner = $mail_owner" \
    "setgid_group = $setgid_group" \
    "sendmail_path = $sendmail_path" \
    "mailq_path = $mailq_path" \
    "newaliases_path = $newaliases_path" \
    "html_directory = $html_directory" \
    "manpage_directory = $manpage_directory" \
    "sample_directory = $sample_directory" \
    "readme_directory = $readme_directory" \
|| exit 1

# If Postfix is being installed locally from source code, do the
# post-install processing now.

test -n "$install_root" || {
    bin/postfix post-install $post_install_options || exit 1
}