BIND-libraries revision 1.1 1 Current ISC DHCP uses the BIND 9 libraries for some services.
2 These libraries can be embedded in the bind directory or external using
3 the configuration parameter --with-libbind=PATH with PATh pointing to
4 the directory where can be found includes and libraries.
5
6 Using standard embedded libraries is safe but you can configure
7 them with extra parameters (cf --with-bind-extra-config) or simply
8 use external libraries with a different configuration.
9
10 Note if you want to share libraries between bind 9 and ISC DHCP
11 BIND 9 must be built and installed before ISC DHCP build is configured.
12
13 Three cases are possible:
14 - everything builds and works fine
15
16 - building requires extra parameters, for instance --enable-threads
17 can require a link parameter to find POSIX threads.
18 In this case you should look at the config.status file of the bind
19 libraries, take CC, CPPFLAGS, CFLAGS, LIBS or LDFLAGS related
20 parameters, and add them to the call to make.
21
22 - even when the previous step succeeds ISC DHCP still does not work
23 properly. We are trying to collect such cases (cf the list bellow)
24 but unfortunately you have to forget the particular feature.
25
26 Below you have 3 kinds of don't use:
27 - please don't use means it should likely break ISC DHCP
28
29 - don't use means unless you don't have a good reason to use it
30
31 - by default don't use it means you should not use it for embedded
32 libraries but it doesn't lead to problems (other than possible
33 new ISC DHCP build flags and bigger binaries) when used for
34 external BIND 9 libraries
35
36 Possible bind9 configuration flags (list built from bind 9.11 and bind 9.12
37 various branches even ISC DHCP uses only the git v9_11 branch):
38 -h, --help, -V, --version
39 make configure to exit immediately so don't use
40
41 -q, --quiet, --silent, --cache-file, -C, --config-cache,
42 --with-make-clean
43 you have no reason to use them but they should not have bad effect
44
45 -n, --no-create
46 make configure to exit too early so don't use
47
48 --prefix, --exec-prefix
49 not used for embedded libraries but used by BIND 9
50
51 --bindir, --sbindir, --libexecdir, --sysconfdir, --sharedstatedir,
52 --localstatedir, --oldincludedir, --datarootdir, --datadir, --infodir,
53 --localedir, --mandir, --docdir, --htmldir, --dvidir, --pdfdir, --psdir
54 not used for embedded nor BIND 9 for its includes and libraries
55
56 --libdir, --includedir
57 used for embedded libraries for the make install (cf the
58 --enable-bind-install ISC DHCP configuration parameter)
59
60 --build, --host
61 used for cross compiling and handled by ISC DHCP configure
62
63 --disable-option-checking
64 this disables a sanity check so please don't use
65
66 --enable-shared, --enable-static, --enable-fast-install
67 ignored by embedded or BIND 9 libraries configure
68
69 --disable-libtool-lock
70 parallel builds don't work for embedded or BIND 9 libraries build
71 so it should not have any effect
72
73 --enable-libbind
74 this was deprecated so please don't use
75
76 --enable-warn-shadow
77 for developers, should have no effect if compilers don't raise errors
78 (vs warnings) on this (and a shadowing was left)
79
80 --enable-warn-error, --with-sysroot
81 this likely breaks the build so please don't use
82
83 --enable-developer
84 for developers, should have no direct effect but still recommend
85 to not use it
86
87 --enable-afl
88 for developers, useless for ISC DHCP so don't use
89
90 --enable-seccomp
91 this should not have any effect for ISC DHCP?
92
93 --enable-kqueue, --enable-epoll, --enable-devpoll
94 please use them at the ISC DHCP configure level, they should work
95 but not yet fully tested so use at your own risk
96
97 --enable-threads
98 this should work but not yet fully tested so use at your own risk.
99 Note on many systems it requires an extra flag for ISC DHCP building
100 and some experiments showed a large slow down when this is enabled
101
102 --enable-native-pkcs11
103 You should not have a reason to use this and it likely won't work
104 so please don't use
105
106 --enable-openssl-version-check
107 You should never use an antic version of OpenSSL with known
108 security bugs so please don't use
109
110 --enable-openssl-hash
111 Comes with --with-openssl so if OpenSSL raises some problems with
112 hash or HMAC you can try to disable this
113
114 --enable-crypto-rand
115 Comes with --with-openssl so if OpenSSL raises some problems with
116 random number generation you can try to disable this
117
118 --enable-largefile
119 Perhaps there is no systems today where this is required so
120 by default don't use
121
122 --enable-backtrace, --enable-symtable
123 this should have no effect for ISC DHCP?
124
125 --enable-ipv6, --disable-tcp-fastopen, --enable-getifaddrs, --enable-atomic
126 please leave embedded or BIND 9 libraries configure to do its job
127 so please don't use
128
129 --disable-isc-spnego, --with-gssapi
130 this should have no effect for ISC DHCP?
131
132 --enable-full-report
133 this should have no effect for ISC DHCP but is still useful
134 to get more information about bind configuration so use it
135 if you believe it can be useful
136
137 --disable-chroot, --disable-linux-caps, --enable-fixed-rrset,
138 --disable-rpz-nsip, --disable-rpz-nsdname, --enable-filter-aaaa,
139 --enable-querytrace, --with-python, --with-python-install-dir,
140 --with-locktype, --with-pkcs11, --with-ecdsa, --with-gost,
141 --with-eddsa, --with-aes, --with-cc-alg, --with-purify,
142 --with-gperftools-profiler, --with-kame, --with-docbook-xsl,
143 --with-dlopen
144 this should have no effect for ISC DHCP
145
146 --enable-dnsrps-dl, --enable-dnsrps, --enable-dnstap, --with-geoip,
147 --with-lmdb, --with-libxml2, --with-libjson, --with-zlib,
148 --with-readline, --with-dnsrps-libname, --with-dnsrps-dir,
149 --with-protobuf-c, --with-libfstrm, --with-idn, --with-libiconv,
150 --with-iconv, --with-idnlib, --with-dlz-*
151 useless for ISC DHCP so by default don't use
152
153 --with-pic
154 this should have no effect for ISC DHCP?
155
156 --with-gnu-ld
157 this should have no effect for ISC DHCP?
158
159 --with-randomdev, --with-atf
160 please use them at the ISC DHCP configure level
161
162 --with-libtool
163 please leave the ISC DHCP configure manage this
164
165 --with-openssl
166 useless for ISC DHCP by default don't use but remember it is
167 required for DNSSEC
168
169 --with-tuning
170 by default don't use
171