Home | History | Annotate | Line # | Download | only in primes
primes.c revision 1.9
      1 /*	$NetBSD: primes.c,v 1.9 1999/09/08 21:17:55 jsm Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1989, 1993
      5  *	The Regents of the University of California.  All rights reserved.
      6  *
      7  * This code is derived from software contributed to Berkeley by
      8  * Landon Curt Noll.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *	This product includes software developed by the University of
     21  *	California, Berkeley and its contributors.
     22  * 4. Neither the name of the University nor the names of its contributors
     23  *    may be used to endorse or promote products derived from this software
     24  *    without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     36  * SUCH DAMAGE.
     37  */
     38 
     39 #include <sys/cdefs.h>
     40 #ifndef lint
     41 __COPYRIGHT("@(#) Copyright (c) 1989, 1993\n\
     42 	The Regents of the University of California.  All rights reserved.\n");
     43 #endif /* not lint */
     44 
     45 #ifndef lint
     46 #if 0
     47 static char sccsid[] = "@(#)primes.c	8.5 (Berkeley) 5/10/95";
     48 #else
     49 __RCSID("$NetBSD: primes.c,v 1.9 1999/09/08 21:17:55 jsm Exp $");
     50 #endif
     51 #endif /* not lint */
     52 
     53 /*
     54  * primes - generate a table of primes between two values
     55  *
     56  * By: Landon Curt Noll chongo (at) toad.com, ...!{sun,tolsoft}!hoptoad!chongo
     57  *
     58  * chongo <for a good prime call: 391581 * 2^216193 - 1> /\oo/\
     59  *
     60  * usage:
     61  *	primes [start [stop]]
     62  *
     63  *	Print primes >= start and < stop.  If stop is omitted,
     64  *	the value 4294967295 (2^32-1) is assumed.  If start is
     65  *	omitted, start is read from standard input.
     66  *
     67  * validation check: there are 664579 primes between 0 and 10^7
     68  */
     69 
     70 #include <ctype.h>
     71 #include <err.h>
     72 #include <errno.h>
     73 #include <limits.h>
     74 #include <math.h>
     75 #include <memory.h>
     76 #include <stdio.h>
     77 #include <stdlib.h>
     78 #include <unistd.h>
     79 
     80 #include "primes.h"
     81 
     82 /*
     83  * Eratosthenes sieve table
     84  *
     85  * We only sieve the odd numbers.  The base of our sieve windows are always
     86  * odd.  If the base of table is 1, table[i] represents 2*i-1.  After the
     87  * sieve, table[i] == 1 if and only iff 2*i-1 is prime.
     88  *
     89  * We make TABSIZE large to reduce the overhead of inner loop setup.
     90  */
     91 char table[TABSIZE];	 /* Eratosthenes sieve of odd numbers */
     92 
     93 /*
     94  * prime[i] is the (i-1)th prime.
     95  *
     96  * We are able to sieve 2^32-1 because this byte table yields all primes
     97  * up to 65537 and 65537^2 > 2^32-1.
     98  */
     99 extern const ubig prime[];
    100 extern const ubig *pr_limit;		/* largest prime in the prime array */
    101 
    102 /*
    103  * To avoid excessive sieves for small factors, we use the table below to
    104  * setup our sieve blocks.  Each element represents a odd number starting
    105  * with 1.  All non-zero elements are factors of 3, 5, 7, 11 and 13.
    106  */
    107 extern const char pattern[];
    108 extern const int pattern_size;	/* length of pattern array */
    109 
    110 int	main __P((int, char *[]));
    111 void	primes __P((ubig, ubig));
    112 ubig	read_num_buf __P((void));
    113 void	usage __P((void)) __attribute__((__noreturn__));
    114 
    115 int
    116 main(argc, argv)
    117 	int argc;
    118 	char *argv[];
    119 {
    120 	ubig start;		/* where to start generating */
    121 	ubig stop;		/* don't generate at or above this value */
    122 	int ch;
    123 	char *p;
    124 
    125 	while ((ch = getopt(argc, argv, "")) != -1)
    126 		switch (ch) {
    127 		case '?':
    128 		default:
    129 			usage();
    130 		}
    131 	argc -= optind;
    132 	argv += optind;
    133 
    134 	start = 0;
    135 	stop = BIG;
    136 
    137 	/*
    138 	 * Convert low and high args.  Strtoul(3) sets errno to
    139 	 * ERANGE if the number is too large, but, if there's
    140 	 * a leading minus sign it returns the negation of the
    141 	 * result of the conversion, which we'd rather disallow.
    142 	 */
    143 	switch (argc) {
    144 	case 2:
    145 		/* Start and stop supplied on the command line. */
    146 		if (argv[0][0] == '-' || argv[1][0] == '-')
    147 			errx(1, "negative numbers aren't permitted.");
    148 
    149 		errno = 0;
    150 		start = strtoul(argv[0], &p, 10);
    151 		if (errno)
    152 			err(1, "%s", argv[0]);
    153 		if (*p != '\0')
    154 			errx(1, "%s: illegal numeric format.", argv[0]);
    155 
    156 		errno = 0;
    157 		stop = strtoul(argv[1], &p, 10);
    158 		if (errno)
    159 			err(1, "%s", argv[1]);
    160 		if (*p != '\0')
    161 			errx(1, "%s: illegal numeric format.", argv[1]);
    162 		break;
    163 	case 1:
    164 		/* Start on the command line. */
    165 		if (argv[0][0] == '-')
    166 			errx(1, "negative numbers aren't permitted.");
    167 
    168 		errno = 0;
    169 		start = strtoul(argv[0], &p, 10);
    170 		if (errno)
    171 			err(1, "%s", argv[0]);
    172 		if (*p != '\0')
    173 			errx(1, "%s: illegal numeric format.", argv[0]);
    174 		break;
    175 	case 0:
    176 		start = read_num_buf();
    177 		break;
    178 	default:
    179 		usage();
    180 	}
    181 
    182 	if (start > stop)
    183 		errx(1, "start value must be less than stop value.");
    184 	primes(start, stop);
    185 	exit(0);
    186 }
    187 
    188 /*
    189  * read_num_buf --
    190  *	This routine returns a number n, where 0 <= n && n <= BIG.
    191  */
    192 ubig
    193 read_num_buf()
    194 {
    195 	ubig val;
    196 	char *p, buf[100];		/* > max number of digits. */
    197 
    198 	for (;;) {
    199 		if (fgets(buf, sizeof(buf), stdin) == NULL) {
    200 			if (ferror(stdin))
    201 				err(1, "stdin");
    202 			exit(0);
    203 		}
    204 		for (p = buf; isblank(*p); ++p);
    205 		if (*p == '\n' || *p == '\0')
    206 			continue;
    207 		if (*p == '-')
    208 			errx(1, "negative numbers aren't permitted.");
    209 		errno = 0;
    210 		val = strtoul(buf, &p, 10);
    211 		if (errno)
    212 			err(1, "%s", buf);
    213 		if (*p != '\n')
    214 			errx(1, "%s: illegal numeric format.", buf);
    215 		return (val);
    216 	}
    217 }
    218 
    219 /*
    220  * primes - sieve and print primes from start up to and but not including stop
    221  */
    222 void
    223 primes(start, stop)
    224 	ubig start;	/* where to start generating */
    225 	ubig stop;	/* don't generate at or above this value */
    226 {
    227 	char *q;		/* sieve spot */
    228 	ubig factor;		/* index and factor */
    229 	char *tab_lim;		/* the limit to sieve on the table */
    230 	const ubig *p;		/* prime table pointer */
    231 	ubig fact_lim;		/* highest prime for current block */
    232 
    233 	/*
    234 	 * A number of systems can not convert double values into unsigned
    235 	 * longs when the values are larger than the largest signed value.
    236 	 * We don't have this problem, so we can go all the way to BIG.
    237 	 */
    238 	if (start < 3) {
    239 		start = (ubig)2;
    240 	}
    241 	if (stop < 3) {
    242 		stop = (ubig)2;
    243 	}
    244 	if (stop <= start) {
    245 		return;
    246 	}
    247 
    248 	/*
    249 	 * be sure that the values are odd, or 2
    250 	 */
    251 	if (start != 2 && (start&0x1) == 0) {
    252 		++start;
    253 	}
    254 	if (stop != 2 && (stop&0x1) == 0) {
    255 		++stop;
    256 	}
    257 
    258 	/*
    259 	 * quick list of primes <= pr_limit
    260 	 */
    261 	if (start <= *pr_limit) {
    262 		/* skip primes up to the start value */
    263 		for (p = &prime[0], factor = prime[0];
    264 		    factor < stop && p <= pr_limit; factor = *(++p)) {
    265 			if (factor >= start) {
    266 				printf("%lu\n", (unsigned long) factor);
    267 			}
    268 		}
    269 		/* return early if we are done */
    270 		if (p <= pr_limit) {
    271 			return;
    272 		}
    273 		start = *pr_limit+2;
    274 	}
    275 
    276 	/*
    277 	 * we shall sieve a bytemap window, note primes and move the window
    278 	 * upward until we pass the stop point
    279 	 */
    280 	while (start < stop) {
    281 		/*
    282 		 * factor out 3, 5, 7, 11 and 13
    283 		 */
    284 		/* initial pattern copy */
    285 		factor = (start%(2*3*5*7*11*13))/2; /* starting copy spot */
    286 		memcpy(table, &pattern[factor], pattern_size-factor);
    287 		/* main block pattern copies */
    288 		for (fact_lim=pattern_size-factor;
    289 		    fact_lim+pattern_size<=TABSIZE; fact_lim+=pattern_size) {
    290 			memcpy(&table[fact_lim], pattern, pattern_size);
    291 		}
    292 		/* final block pattern copy */
    293 		memcpy(&table[fact_lim], pattern, TABSIZE-fact_lim);
    294 
    295 		/*
    296 		 * sieve for primes 17 and higher
    297 		 */
    298 		/* note highest useful factor and sieve spot */
    299 		if (stop-start > TABSIZE+TABSIZE) {
    300 			tab_lim = &table[TABSIZE]; /* sieve it all */
    301 			fact_lim = (int)sqrt(
    302 					(double)(start)+TABSIZE+TABSIZE+1.0);
    303 		} else {
    304 			tab_lim = &table[(stop-start)/2]; /* partial sieve */
    305 			fact_lim = (int)sqrt((double)(stop)+1.0);
    306 		}
    307 		/* sieve for factors >= 17 */
    308 		factor = 17;	/* 17 is first prime to use */
    309 		p = &prime[7];	/* 19 is next prime, pi(19)=7 */
    310 		do {
    311 			/* determine the factor's initial sieve point */
    312 			q = (char *)(start%factor); /* temp storage for mod */
    313 			if ((long)q & 0x1) {
    314 				q = &table[(factor-(long)q)/2];
    315 			} else {
    316 				q = &table[q ? factor-((long)q/2) : 0];
    317 			}
    318 			/* sive for our current factor */
    319 			for ( ; q < tab_lim; q += factor) {
    320 				*q = '\0'; /* sieve out a spot */
    321 			}
    322 		} while ((factor=(ubig)(*(p++))) <= fact_lim);
    323 
    324 		/*
    325 		 * print generated primes
    326 		 */
    327 		for (q = table; q < tab_lim; ++q, start+=2) {
    328 			if (*q) {
    329 				printf("%lu\n", (unsigned long) start);
    330 			}
    331 		}
    332 	}
    333 }
    334 
    335 void
    336 usage()
    337 {
    338 	(void)fprintf(stderr, "usage: primes [start [stop]]\n");
    339 	exit(1);
    340 }
    341