SYS.h revision 1.4 1 /*-
2 * Copyright (c) 1992, 1993
3 * The Regents of the University of California. All rights reserved.
4 *
5 * This software was developed by the Computer Systems Engineering group
6 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
7 * contributed to Berkeley.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed by the University of
20 * California, Berkeley and its contributors.
21 * 4. Neither the name of the University nor the names of its contributors
22 * may be used to endorse or promote products derived from this software
23 * without specific prior written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35 * SUCH DAMAGE.
36 *
37 * @(#)SYS.h 8.1 (Berkeley) 6/4/93
38 *
39 * from: Header: SYS.h,v 1.2 92/07/03 18:57:00 torek Exp
40 * $NetBSD: SYS.h,v 1.4 2000/07/18 22:39:25 eeh Exp $
41 */
42
43 #include <machine/asm.h>
44 #include <sys/syscall.h>
45 #include <machine/trap.h>
46
47 #ifdef __STDC__
48 #define _CAT(x,y) x##y
49 #else
50 #define _CAT(x,y) x/**/y
51 #endif
52
53 /*
54 * ERROR branches to cerror. This is done with a macro so that I can
55 * change it to be position independent later, if need be.
56 */
57 #ifdef PIC
58 #define ERROR() \
59 PIC_PROLOGUE(%g1,%g2); \
60 ldx [%g1+_C_LABEL(__cerror)],%g2; jmp %g2; nop
61 #else
62 #define ERROR() \
63 sethi %hi(_C_LABEL(__cerror)),%g1; or %lo(_C_LABEL(__cerror)),%g1,%g1; \
64 jmp %g1; nop
65 #endif
66
67 /*
68 * SYSCALL is used when further action must be taken before returning.
69 * Note that it adds a `nop' over what we could do, if we only knew what
70 * came at label 1....
71 */
72 #define _SYSCALL(x,y) \
73 ENTRY(x); mov _CAT(SYS_,y),%g1; t ST_SYSCALL; bcc 1f; nop; ERROR(); 1:
74
75 #define SYSCALL(x) \
76 _SYSCALL(x,x)
77
78 /*
79 * RSYSCALL is used when the system call should just return. Here
80 * we use the SYSCALL_G2RFLAG to put the `success' return address in %g2
81 * and avoid a branch.
82 */
83 #define RSYSCALL(x) \
84 ENTRY(x); mov (_CAT(SYS_,x))|SYSCALL_G2RFLAG,%g1; add %o7,8,%g2; \
85 t ST_SYSCALL; ERROR()
86
87 /*
88 * PSEUDO(x,y) is like RSYSCALL(y) except that the name is x.
89 */
90 #define PSEUDO(x,y) \
91 ENTRY(x); mov (_CAT(SYS_,y))|SYSCALL_G2RFLAG,%g1; add %o7,8,%g2; \
92 t ST_SYSCALL; ERROR()
93
94 /*
95 * SYSCALL_NOERROR is like SYSCALL, except it's used for syscalls
96 * that never fail.
97 *
98 * XXX - This should be optimized.
99 */
100 #define SYSCALL_NOERROR(x) \
101 ENTRY(x); mov _CAT(SYS_,x),%g1; t ST_SYSCALL
102
103 /*
104 * RSYSCALL_NOERROR is like RSYSCALL, except it's used for syscalls
105 * that never fail.
106 *
107 * XXX - This should be optimized.
108 */
109 #define RSYSCALL_NOERROR(x) \
110 ENTRY(x); mov (_CAT(SYS_,x))|SYSCALL_G2RFLAG,%g1; add %o7,8,%g2; \
111 t ST_SYSCALL
112
113 /*
114 * PSEUDO_NOERROR(x,y) is like RSYSCALL_NOERROR(y) except that the name is x.
115 */
116 #define PSEUDO_NOERROR(x,y) \
117 ENTRY(x); mov (_CAT(SYS_,y))|SYSCALL_G2RFLAG,%g1; add %o7,8,%g2; \
118 t ST_SYSCALL
119
120 .globl _C_LABEL(__cerror)
121