OpenGrok

p Draws a box around the window using .Vn vert as the character for drawing the vertical sides, and .Vn hor for drawing the horizontal lines. If scrolling is not allowed, and the window encompasses the lower right-hand corner of the terminal, the corners are left blank to avoid a scroll. .Ds .Fn cbreak "" \(dg .De Set the terminal to cbreak mode. .Ds .Fn clear "" \(dg .De Resets the entire window to blanks. If .Vn win is a screen, this sets the clear flag, which will cause a clear-screen sequence to be sent on the next .Fn refresh call. This also moves the current \*y to (0\*,0). .Ds .Fn clearok "WINDOW *scr" "int boolf" \(dg .De Sets the clear flag for the screen .Vn scr . If .Vn boolf is non-zero, this will force a clear-screen to be printed on the next .Fn refresh , or stop it from doing so if .Vn boolf is 0. This only works on screens, and, unlike .Fn clear , does not alter the contents of the screen. If .Vn scr is .Vn curscr , the next .Fn refresh call will cause a clear-screen, even if the window passed to .Fn refresh is not a screen. .Ds .Fn clrtobot "" \(dg .De Wipes the window clear from the current \*y to the bottom. This does not force a clear-screen sequence on the next refresh under any circumstances. \*(Nm .Ds .Fn clrtoeol "" \(dg .De Wipes the window clear from the current \*y to the end of the line. \*(Nm .Ds .Fn crmode "" \(dg .De Identical to .Fn cbreak . The misnamed macro .Fn crmode and .Fn nocrmode is retained for backwards compatibility with ealier versions of the library. .Ds .Fn delch "" .De Delete the character at the current \*y. Each character after it on the line shifts to the left, and the last character becomes blank. .Ds .Fn deleteln "" .De Delete the current line. Every line below the current one will move up, and the bottom line will become blank. The current \*y will remain unchanged. .Ds .Fn delwin "WINDOW *win" .De Deletes the window from existence. All resources are freed for future use by .b calloc (3). If a window has a .Fn subwin allocated window inside of it, deleting the outer window the subwindow is not affected, even though this does invalidate it. Therefore, subwindows should be deleted before their outer windows are. .Ds .Fn echo "" \(dg .De Sets the terminal to echo characters. .Ds .Fn endwin "" .De Finish up window routines before exit. This restores the terminal to the state it was before .Fn initscr (or .Fn gettmode and .Fn setterm ) was called. It should always be called before exiting and before the final calls to .Fn delwin . It does not exit. This is especially useful for resetting tty stats when trapping rubouts via .b signal (2). .Ds .Fn erase "" \(dg .De Erases the window to blanks without setting the clear flag. This is analagous to .Fn clear , except that it never causes a clear-screen sequence to be generated on a .Fn refresh . \*(Nm .Ds .Fn erasechar "" \(dg .De Returns the erase character for the terminal, .i i.e. , the character used by the user to erase a single character from the input. .Ds .Fn flash "" .De Flash the terminal screen. If the terminal has no flash capability, but has the ability to sound the bell, do that instead. See also .Fn bell .Ds .Fn flushinp "" .De Throw away any input that has been typed by the user but has not yet been read by the program. .Ds .Fn flushok "WINDOW *win" "int boolf" .De Normally, .Fn refresh .Fn fflush 's .Vn stdout when it is finished. .Fn flushok allows you to control this. if .Vn boolf is non-zero (\c .i i.e. , non-zero) it will do the .Fn fflush , otherwise it will not. .Ds .Fn getch "" \(dg .De Gets a character from the terminal and (if necessary) echos it on the window. \*(Es Otherwise, the character gotten is returned. If .i noecho has been set, then the window is left unaltered. In order to retain control of the terminal, it is necessary to have one of .i noecho , .i cbreak , or .i rawmode set. If you do not set one, whatever routine you call to read characters will set .i cbreak for you, and then reset to the original mode when finished. .Ds .Fn getstr "char *str" \(dg .De Get a string through the window and put it in the location pointed to by .Vn str , which is assumed to be large enough to handle it. It sets tty modes if necessary, and then calls .Fn getch (or .Fn wgetch ) to get the characters needed to fill in the string until a newline or EOF is encountered. The newline stripped off the string. \*(Es .Ds .Fn gettmode "" .De Get the tty stats. This is normally called by .Fn initscr . .Ds .Fn getyx "WINDOW *win" "int y" "int x" .De Puts the current \*y of .Vn win in the variables .Vn y and .Vn x . Since it is a macro, not a function, you do not pass the address of .Vn y and .Vn x . .Ds .Fn idlok "WINDOW *win" "int boolf" .De Reserved for future use. This will eventually signal to .Fn refresh that it is all right to use the insert and delete line sequences when updating the window. .Ds .Fn inch "" \(dg .De Returns the character at the current position on the given window. This does not make any changes to the window. .Ds .Fn initscr "" .De Initialize the screen routines. This must be called before any of the screen routines are used. It initializes the terminal-type data and such, and without it none of the routines can operate. If standard input is not a tty, it sets the specifications to the terminal whose name is pointed to by .Vn Def\*_term (initially "dumb"). If the boolean .Vn My\*_term is non-zero, .Vn Def\*_term is always used. If the system supports the .b TIOCGWINSZ .i ioctl(2) call, it is used to get the number of lines and columns for the terminal, otherwise it is taken from the .b termcap description. .Ds .Fn insch "char c" .De Insert .Vn c at the current \*y Each character after it shifts to the right, and the last character disappears. \*(Es .Ds .Fn insertln "" .De Insert a line above the current one. Every line below the current line will be shifted down, and the bottom line will disappear. The current line will become blank, and the current \*y will remain unchanged. .Ds .Fn isendwin "" .De Returns TRUE if .Fn endwin has been called without a subsequent call to .Fn wrefresh , and FALSE otherwise. .Ds .Fn keypad "WINDOW *win" "int boolf" .De Sets the boolean flag for interpretation of escape sequences. If .Vn boolf is non-zero, escape sequences from terminal keypad and function keys will be interpreted by the library. Escape sequnces are not interpreted by default. The include file .b <curses.h> contains the list of recognised keypad and function keys. See also .Fn notimeout . .Ds .Fn killchar "" \(dg .De Returns the line kill character for the terminal, .i i.e. , the character used by the user to erase an entire line from the input. .Ds .Fn leaveok "WINDOW *win" "int boolf" \(dg .De Sets the boolean flag for leaving the cursor after the last change. If .Vn boolf is non-zero, the cursor will be left after the last update on the terminal, and the current \*y for .Vn win will be changed accordingly. If .Vn boolf is 0 the cursor will be moved to the current \*y. This flag (initially 0) retains its value until changed by the user. .Ds .Fn move "int y" "int x" .De Change the current \*y of the window to .Vn y\*,x ). ( \*(Es .Ds .Fn mvcur "int lasty" "int lastx" "int newy" "int newx" .De Moves the terminal's cursor from .Vn lasty\*,lastx ) ( to .Vn newy\*,newx ) ( in an approximation of optimal fashion. This routine uses the functions borrowed from .i ex version 2.6. It is possible to use this optimization without the benefit of the screen routines. With the screen routines, this should not be called by the user. .Fn move and .Fn refresh should be used to move the cursor position, so that the routines know what's going on. .Ds .Fn mvprintw "int y" "int x" "const char *fmt" "..." .De Equivalent to: .(l move(y, x); printw(fmt, ...); .)l .Ds .Fn mvscanw "int y" "int x" "const char *fmt" "..." .De Equivalent to: .(l move(y, x); scanw(fmt, ...); .)l .Ds .Fn mvwin "WINDOW *win" "int y" "int x" .De Move the home position of the window .Vn win from its current starting coordinates to .Vn y\*,x ). ( If that would put part or all of the window off the edge of the terminal screen, .Fn mvwin returns ERR and does not change anything. For subwindows, .Fn mvwin also returns ERR if you attempt to move it off its main window. If you move a main window, all subwindows are moved along with it. .Ds .Fn mvwprintw "WINDOW *win" "int y" "int x" "const char *fmt" "..." .De Equivalent to: .(l wmove(win, y, x); printw(fmt, ...); .)l .Ds .Fn mvwscanw "WINDOW *win" "int y" "int x" "const char *fmt" "..." .De Equivalent to: .(l wmove(win, y, x); scanw(fmt, ...); .)l .Ds .Ft "WINDOW *" .Fn newwin "int lines" "int cols" "int begin_y" "int begin_x" .De Create a new window with .Vn lines lines and .Vn cols columns starting at position .Vn begin\*_y\*,begin\*_x ). ( If either .Vn lines or .Vn cols is 0 (zero), that dimension will be set to .Vn "LINES - begin\*_y" ) ( or .Vn "COLS - begin\*_x" ) ( respectively. Thus, to get a new window of dimensions .Vn LINES \(mu .Vn COLS , use .Fn newwin 0 0 0 0 . .Ds .Fn nl "" \(dg .De Set the terminal to nl mode, .i i.e. , start/stop the system from mapping .b <RETURN> to .b <LINE-FEED> . If the mapping is not done, .Fn refresh can do more optimization, so it is recommended, but not required, to turn it off. .Ds .Fn nocbreak "" \(dg .De Unset the terminal from cbreak mode. .Ds .Fn nocrmode "" \(dg .De Identical to .Fn nocbreak . The misnamed macro .Fn nocrmode is retained for backwards compatibility with ealier versions of the library. .Ds .Fn nodelay "WINDOW *win1" "int boolf" .De Sets the boolean flag for non-blocking .Fn getch . If .Vn boolf is non-zero, .Fn getch will return ERR is no input is waiting. The default is to for .Fn getch to block indefinitely. See also .Fn timeout . .Ds .Fn noecho "" \(dg .De Turn echoing of characters off. .Ds .Fn nonl "" \(dg .De Unset the terminal to from nl mode. See .Fn nl . .Ds .Fn noraw "" \(dg .De Unset the terminal from raw mode. See .Fn raw . .Ds .Fn notimeout "WINDOW *win1" "int boolf" .De Sets the boolean flag for inter-key timeouts for escape sequences interpreted when .Fn keypad is set. By default, .Fn keypad sets a timer while waiting for the next character of an escape sequence. If .Vn boolf is non-zero, .Fn getch will wait indefinitely between escape sequence characters, or until a delay set by .Fn timeout expires. .Ds .Fn overlay "WINDOW *win1" "WINDOW *win2" .De Overlay .Vn win1 on .Vn win2 . The contents of .Vn win1 , insofar as they fit, are placed on .Vn win2 at their starting \*y. This is done non-destructively, i.e., blanks on .Vn win1 leave the contents of the space on .Vn win2 untouched. Note that all non-blank characters are overwritten destructively in the overlay. .Ds .Fn overwrite "WINDOW *win1" "WINDOW *win2" .De Overwrite .Vn win1 on .Vn win2 . The contents of .Vn win1 , insofar as they fit, are placed on .Vn win2 at their starting \*y. This is done destructively, .i i.e. , blanks on .Vn win1 become blank on .Vn win2 . .Ds .Fn printw "char *fmt" "..." .De Performs a .Fn printf on the window starting at the current \*y. It uses .Fn addstr to add the string on the window. It is often advisable to use the field width options of .Fn printf to avoid leaving things on the window from earlier calls. \*(Es .Ds .Fn raw "" \(dg .De Set the terminal to raw mode. On version 7 n \** .(f \** n is a trademark of Unix System Laboratories. .)f this also turns off newline mapping (see .Fn nl ). .Ds .Fn refresh "" \(dg .De Synchronize the terminal screen with the desired window. If the window is not a screen, only that part covered by it is updated. \*(Es In this case, it will update whatever it can without causing the scroll. As a special case, if .Fn wrefresh is called with the window .Vn curscr the screen is cleared and repainted as it is currently. This is very useful for allowing the redrawing of the screen when the user has garbage dumped on his terminal. .Ds .Fn resetty "" \(dg .De .Fn resetty restores them to what .Fn savetty stored. These functions are performed automatically by .Fn initscr and .Fn endwin . This function should not be used by the user. .Ds .Fn savetty "" \(dg .De .Fn savetty saves the current tty characteristic flags. See .Fn resetty . This function should not be used by the user. .Ds .Fn scanw "char *fmt" "..." .De Perform a .Fn scanf through the window using .Vn fmt . It does this using consecutive calls to .Fn getch (or .Fn wgetch ). \*(Es .Ds .Fn scroll "WINDOW *win" .De Scroll the window upward one line. This is normally not used by the user. .Ds .Fn scrollok "WINDOW *win" "int boolf" \(dg .De Set the scroll flag for the given window. If .Vn boolf is 0, scrolling is not allowed. This is its default setting. .Ds .Fn standend "" \(dg .De End standout mode initiated by .Fn standout . This function is provided for compatibility with older curses implementations. .Ds .Fn standout "" \(dg .De Causes any characters added to the window to be put in standout mode on the terminal (if it has that capability). This function is provided for compatibility with older curses implementations. A larger range of character attributes supported by modern terminals can be accessed using .Fn attron and .Fn attrset . .Ds .Ft "WINDOW *" .Fn subwin "WINDOW *win" "int lines" "int cols" "int begin_y" "int begin_x" .De Create a new window with .Vn lines lines and .Vn cols columns starting at position .Vn begin\*_y\*,begin\*_x ) ( inside the window .i win . This means that any change made to either window in the area covered by the subwindow will be made on both windows. .Vn begin\*_y\*,begin\*_x are specified relative to the overall screen, not the relative (0\*,0) of .Vn win . If either .Vn lines or .Vn cols is 0 (zero), that dimension will be set to .Vn "LINES - begin\*_y" ) ( or .Vn "COLS - begin\*_x" ) ( respectively. .Ds .Fn timeout "int delay" \(dg .De Sets blocking or non-blocking .Fn getch . If .Vn delay is positive, .Fn getch will block for .Vn delay milliseconds before returning. If .Vn delay is zero, .Fn getch will return ERR is no input is waiting. If .Vn delay is negative, .Fn getch will block indefinitely. See also .Fn keypad , .Fn nodelay and .Fn notimeout . .Ds .Fn touchline "WINDOW *win" "int y" "int startx" "int endx" .De This function performs a function similar to .Fn touchwin on a single line. It marks the first change for the given line to be .Vn startx , if it is before the current first change mark, and the last change mark is set to be .Vn endx if it is currently less than .Vn endx . .Ds .Fn touchoverlap "WINDOW *win1" "WINDOW *win2" .De Touch the window .Vn win2 in the area which overlaps with .Vn win1 . If they do not overlap, no changes are made. .Ds .Fn touchwin "WINDOW *win" .De Make it appear that the every location on the window has been changed. This is usually only needed for refreshes with overlapping windows. .Ds .Fn tstp .De This function will save the current tty state and then put the process to sleep. When the process gets restarted, it restores the saved tty state and then calls .Fn wrefresh "curscr" to redraw the screen. .Fn Initscr sets the signal SIGTSTP to trap to this routine. .Ds .Fn unctrl "char *ch" \(dg .De Returns a string which is an ASCII representation of .Vn ch . Characters are 8 bits long. .Ds .Fn unctrllen "char *ch" \(dg .De Returns the length of the ASCII representation of .Vn ch . .Ds .Fn underend "" \(dg .De End underscore mode initiated by .Fn underscore . This is equivalent to .Fn attroff "A_UNDERLINE" . .Ds .Fn underscore "" \(dg .De Causes any characters added to the window to be put in underscore mode on the terminal (if it has that capability). This is equivalent to .Fn attron "A_UNDERLINE" . .Ds .Fn vwprintw "WINDOW *win" "const char *fmt" "va_list ap" .De Identical to .Fn printw except that it takes both a window specification and a pointer to a variable length argument list. .Ds .Fn vwscanw "WINDOW *win" "const char *fmt" "va_list ap" .De Identical to .Fn scanw except that it takes both a window specification and a pointer to a variable length argument list. .Ds .Fn waddbytes "WINDOW *win" "char *str" "int len" .De This function is the low level character output function. .Vn Len characters of the string .Vn str are output to the current \*y position of the window specified by .Vn win. .pp The following functions differ from the standard functions only in their specification of a window, rather than the use of the default .Vn stdscr. .Ds .Fn waddch "WINDOW *win" "char ch" .Fn waddstr "WINDOW *win" "char *str" .Fn waddnstr "WINDOW *win" "char *str" "int len" .Fn wattron "WINDOW *win" "int attr" .Fn wattroff "WINDOW *win" "int attr" .Fn wattrset "WINDOW *win" "int attr" .Fn wclear "WINDOW *win" .Fn wclrtobot "WINDOW *win" .Fn wclrtoeol "WINDOW *win" .Fn wdelch "WINDOW *win" .Fn wdeleteln "WINDOW *win" .Fn werase "WINDOW *win" .Fn wgetch "WINDOW *win" .Fn wgetstr "WINDOW *win" "char *str" .Fn winch "WINDOW *win" \(dg .Fn winsch "WINDOW *win" "char c" .Fn winsertln "WINDOW *win" .Fn wmove "WINDOW *win" "int y" int x" .Fn wprintw "WINDOW *win" "char *fmt" "..." .Fn wrefresh "WINDOW *win" .Fn wscanw "WINDOW *win" "char *fmt" "..." .Fn wstandend "WINDOW *win" .Fn wstandout "WINDOW *win" .Fn wtimeout "WINDOW *win" "int delay" .Fn wunderend "WINDOW *win" .Fn wunderscore "WINDOW *win" .Dg