state.c revision 1.5
1 /* 2 * Copyright (c) 1989, 1993 3 * The Regents of the University of California. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by the University of 16 * California, Berkeley and its contributors. 17 * 4. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 */ 33 34 #ifndef lint 35 /* from: static char sccsid[] = "@(#)state.c 8.1 (Berkeley) 6/4/93"; */ 36 static char *rcsid = "$Id: state.c,v 1.5 1994/02/25 03:20:54 cgd Exp $"; 37 #endif /* not lint */ 38 39 #include "telnetd.h" 40 #if defined(AUTHENTICATION) 41 #include <libtelnet/auth.h> 42 #endif 43 44 unsigned char doopt[] = { IAC, DO, '%', 'c', 0 }; 45 unsigned char dont[] = { IAC, DONT, '%', 'c', 0 }; 46 unsigned char will[] = { IAC, WILL, '%', 'c', 0 }; 47 unsigned char wont[] = { IAC, WONT, '%', 'c', 0 }; 48 int not42 = 1; 49 50 /* 51 * Buffer for sub-options, and macros 52 * for suboptions buffer manipulations 53 */ 54 unsigned char subbuffer[512], *subpointer= subbuffer, *subend= subbuffer; 55 56 #define SB_CLEAR() subpointer = subbuffer 57 #define SB_TERM() { subend = subpointer; SB_CLEAR(); } 58 #define SB_ACCUM(c) if (subpointer < (subbuffer+sizeof subbuffer)) { \ 59 *subpointer++ = (c); \ 60 } 61 #define SB_GET() ((*subpointer++)&0xff) 62 #define SB_EOF() (subpointer >= subend) 63 #define SB_LEN() (subend - subpointer) 64 65 #ifdef ENV_HACK 66 unsigned char *subsave; 67 #define SB_SAVE() subsave = subpointer; 68 #define SB_RESTORE() subpointer = subsave; 69 #endif 70 71 72 /* 73 * State for recv fsm 74 */ 75 #define TS_DATA 0 /* base state */ 76 #define TS_IAC 1 /* look for double IAC's */ 77 #define TS_CR 2 /* CR-LF ->'s CR */ 78 #define TS_SB 3 /* throw away begin's... */ 79 #define TS_SE 4 /* ...end's (suboption negotiation) */ 80 #define TS_WILL 5 /* will option negotiation */ 81 #define TS_WONT 6 /* wont " */ 82 #define TS_DO 7 /* do " */ 83 #define TS_DONT 8 /* dont " */ 84 85 void 86 telrcv() 87 { 88 register int c; 89 static int state = TS_DATA; 90 #if defined(CRAY2) && defined(UNICOS5) 91 char *opfrontp = pfrontp; 92 #endif 93 94 while (ncc > 0) { 95 if ((&ptyobuf[BUFSIZ] - pfrontp) < 2) 96 break; 97 c = *netip++ & 0377, ncc--; 98 switch (state) { 99 100 case TS_CR: 101 state = TS_DATA; 102 /* Strip off \n or \0 after a \r */ 103 if ((c == 0) || (c == '\n')) { 104 break; 105 } 106 /* FALL THROUGH */ 107 108 case TS_DATA: 109 if (c == IAC) { 110 state = TS_IAC; 111 break; 112 } 113 /* 114 * We now map \r\n ==> \r for pragmatic reasons. 115 * Many client implementations send \r\n when 116 * the user hits the CarriageReturn key. 117 * 118 * We USED to map \r\n ==> \n, since \r\n says 119 * that we want to be in column 1 of the next 120 * printable line, and \n is the standard 121 * unix way of saying that (\r is only good 122 * if CRMOD is set, which it normally is). 123 */ 124 if ((c == '\r') && his_state_is_wont(TELOPT_BINARY)) { 125 int nc = *netip; 126 #ifdef LINEMODE 127 /* 128 * If we are operating in linemode, 129 * convert to local end-of-line. 130 */ 131 if (linemode && (ncc > 0) && (('\n' == nc) || 132 ((0 == nc) && tty_iscrnl())) ) { 133 netip++; ncc--; 134 c = '\n'; 135 } else 136 #endif 137 { 138 state = TS_CR; 139 } 140 } 141 *pfrontp++ = c; 142 break; 143 144 case TS_IAC: 145 gotiac: switch (c) { 146 147 /* 148 * Send the process on the pty side an 149 * interrupt. Do this with a NULL or 150 * interrupt char; depending on the tty mode. 151 */ 152 case IP: 153 DIAG(TD_OPTIONS, 154 printoption("td: recv IAC", c)); 155 interrupt(); 156 break; 157 158 case BREAK: 159 DIAG(TD_OPTIONS, 160 printoption("td: recv IAC", c)); 161 sendbrk(); 162 break; 163 164 /* 165 * Are You There? 166 */ 167 case AYT: 168 DIAG(TD_OPTIONS, 169 printoption("td: recv IAC", c)); 170 recv_ayt(); 171 break; 172 173 /* 174 * Abort Output 175 */ 176 case AO: 177 { 178 DIAG(TD_OPTIONS, 179 printoption("td: recv IAC", c)); 180 ptyflush(); /* half-hearted */ 181 init_termbuf(); 182 183 if (slctab[SLC_AO].sptr && 184 *slctab[SLC_AO].sptr != (cc_t)(_POSIX_VDISABLE)) { 185 *pfrontp++ = 186 (unsigned char)*slctab[SLC_AO].sptr; 187 } 188 189 netclear(); /* clear buffer back */ 190 *nfrontp++ = IAC; 191 *nfrontp++ = DM; 192 neturg = nfrontp-1; /* off by one XXX */ 193 DIAG(TD_OPTIONS, 194 printoption("td: send IAC", DM)); 195 break; 196 } 197 198 /* 199 * Erase Character and 200 * Erase Line 201 */ 202 case EC: 203 case EL: 204 { 205 cc_t ch; 206 207 DIAG(TD_OPTIONS, 208 printoption("td: recv IAC", c)); 209 ptyflush(); /* half-hearted */ 210 init_termbuf(); 211 if (c == EC) 212 ch = *slctab[SLC_EC].sptr; 213 else 214 ch = *slctab[SLC_EL].sptr; 215 if (ch != (cc_t)(_POSIX_VDISABLE)) 216 *pfrontp++ = (unsigned char)ch; 217 break; 218 } 219 220 /* 221 * Check for urgent data... 222 */ 223 case DM: 224 DIAG(TD_OPTIONS, 225 printoption("td: recv IAC", c)); 226 SYNCHing = stilloob(net); 227 settimer(gotDM); 228 break; 229 230 231 /* 232 * Begin option subnegotiation... 233 */ 234 case SB: 235 state = TS_SB; 236 SB_CLEAR(); 237 continue; 238 239 case WILL: 240 state = TS_WILL; 241 continue; 242 243 case WONT: 244 state = TS_WONT; 245 continue; 246 247 case DO: 248 state = TS_DO; 249 continue; 250 251 case DONT: 252 state = TS_DONT; 253 continue; 254 case EOR: 255 if (his_state_is_will(TELOPT_EOR)) 256 doeof(); 257 break; 258 259 /* 260 * Handle RFC 10xx Telnet linemode option additions 261 * to command stream (EOF, SUSP, ABORT). 262 */ 263 case xEOF: 264 doeof(); 265 break; 266 267 case SUSP: 268 sendsusp(); 269 break; 270 271 case ABORT: 272 sendbrk(); 273 break; 274 275 case IAC: 276 *pfrontp++ = c; 277 break; 278 } 279 state = TS_DATA; 280 break; 281 282 case TS_SB: 283 if (c == IAC) { 284 state = TS_SE; 285 } else { 286 SB_ACCUM(c); 287 } 288 break; 289 290 case TS_SE: 291 if (c != SE) { 292 if (c != IAC) { 293 /* 294 * bad form of suboption negotiation. 295 * handle it in such a way as to avoid 296 * damage to local state. Parse 297 * suboption buffer found so far, 298 * then treat remaining stream as 299 * another command sequence. 300 */ 301 302 /* for DIAGNOSTICS */ 303 SB_ACCUM(IAC); 304 SB_ACCUM(c); 305 subpointer -= 2; 306 307 SB_TERM(); 308 suboption(); 309 state = TS_IAC; 310 goto gotiac; 311 } 312 SB_ACCUM(c); 313 state = TS_SB; 314 } else { 315 /* for DIAGNOSTICS */ 316 SB_ACCUM(IAC); 317 SB_ACCUM(SE); 318 subpointer -= 2; 319 320 SB_TERM(); 321 suboption(); /* handle sub-option */ 322 state = TS_DATA; 323 } 324 break; 325 326 case TS_WILL: 327 willoption(c); 328 state = TS_DATA; 329 continue; 330 331 case TS_WONT: 332 wontoption(c); 333 state = TS_DATA; 334 continue; 335 336 case TS_DO: 337 dooption(c); 338 state = TS_DATA; 339 continue; 340 341 case TS_DONT: 342 dontoption(c); 343 state = TS_DATA; 344 continue; 345 346 default: 347 syslog(LOG_ERR, "telnetd: panic state=%d\n", state); 348 printf("telnetd: panic state=%d\n", state); 349 exit(1); 350 } 351 } 352 #if defined(CRAY2) && defined(UNICOS5) 353 if (!linemode) { 354 char xptyobuf[BUFSIZ+NETSLOP]; 355 char xbuf2[BUFSIZ]; 356 register char *cp; 357 int n = pfrontp - opfrontp, oc; 358 bcopy(opfrontp, xptyobuf, n); 359 pfrontp = opfrontp; 360 pfrontp += term_input(xptyobuf, pfrontp, n, BUFSIZ+NETSLOP, 361 xbuf2, &oc, BUFSIZ); 362 for (cp = xbuf2; oc > 0; --oc) 363 if ((*nfrontp++ = *cp++) == IAC) 364 *nfrontp++ = IAC; 365 } 366 #endif /* defined(CRAY2) && defined(UNICOS5) */ 367 } /* end of telrcv */ 368 369 /* 370 * The will/wont/do/dont state machines are based on Dave Borman's 371 * Telnet option processing state machine. 372 * 373 * These correspond to the following states: 374 * my_state = the last negotiated state 375 * want_state = what I want the state to go to 376 * want_resp = how many requests I have sent 377 * All state defaults are negative, and resp defaults to 0. 378 * 379 * When initiating a request to change state to new_state: 380 * 381 * if ((want_resp == 0 && new_state == my_state) || want_state == new_state) { 382 * do nothing; 383 * } else { 384 * want_state = new_state; 385 * send new_state; 386 * want_resp++; 387 * } 388 * 389 * When receiving new_state: 390 * 391 * if (want_resp) { 392 * want_resp--; 393 * if (want_resp && (new_state == my_state)) 394 * want_resp--; 395 * } 396 * if ((want_resp == 0) && (new_state != want_state)) { 397 * if (ok_to_switch_to new_state) 398 * want_state = new_state; 399 * else 400 * want_resp++; 401 * send want_state; 402 * } 403 * my_state = new_state; 404 * 405 * Note that new_state is implied in these functions by the function itself. 406 * will and do imply positive new_state, wont and dont imply negative. 407 * 408 * Finally, there is one catch. If we send a negative response to a 409 * positive request, my_state will be the positive while want_state will 410 * remain negative. my_state will revert to negative when the negative 411 * acknowlegment arrives from the peer. Thus, my_state generally tells 412 * us not only the last negotiated state, but also tells us what the peer 413 * wants to be doing as well. It is important to understand this difference 414 * as we may wish to be processing data streams based on our desired state 415 * (want_state) or based on what the peer thinks the state is (my_state). 416 * 417 * This all works fine because if the peer sends a positive request, the data 418 * that we receive prior to negative acknowlegment will probably be affected 419 * by the positive state, and we can process it as such (if we can; if we 420 * can't then it really doesn't matter). If it is that important, then the 421 * peer probably should be buffering until this option state negotiation 422 * is complete. 423 * 424 */ 425 void 426 send_do(option, init) 427 int option, init; 428 { 429 if (init) { 430 if ((do_dont_resp[option] == 0 && his_state_is_will(option)) || 431 his_want_state_is_will(option)) 432 return; 433 /* 434 * Special case for TELOPT_TM: We send a DO, but pretend 435 * that we sent a DONT, so that we can send more DOs if 436 * we want to. 437 */ 438 if (option == TELOPT_TM) 439 set_his_want_state_wont(option); 440 else 441 set_his_want_state_will(option); 442 do_dont_resp[option]++; 443 } 444 (void) sprintf(nfrontp, (char *)doopt, option); 445 nfrontp += sizeof (dont) - 2; 446 447 DIAG(TD_OPTIONS, printoption("td: send do", option)); 448 } 449 450 #ifdef AUTHENTICATION 451 extern void auth_request(); 452 #endif 453 #ifdef LINEMODE 454 extern void doclientstat(); 455 #endif 456 457 void 458 willoption(option) 459 int option; 460 { 461 int changeok = 0; 462 void (*func)() = 0; 463 464 /* 465 * process input from peer. 466 */ 467 468 DIAG(TD_OPTIONS, printoption("td: recv will", option)); 469 470 if (do_dont_resp[option]) { 471 do_dont_resp[option]--; 472 if (do_dont_resp[option] && his_state_is_will(option)) 473 do_dont_resp[option]--; 474 } 475 if (do_dont_resp[option] == 0) { 476 if (his_want_state_is_wont(option)) { 477 switch (option) { 478 479 case TELOPT_BINARY: 480 init_termbuf(); 481 tty_binaryin(1); 482 set_termbuf(); 483 changeok++; 484 break; 485 486 case TELOPT_ECHO: 487 /* 488 * See comments below for more info. 489 */ 490 not42 = 0; /* looks like a 4.2 system */ 491 break; 492 493 case TELOPT_TM: 494 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 495 /* 496 * This telnetd implementation does not really 497 * support timing marks, it just uses them to 498 * support the kludge linemode stuff. If we 499 * receive a will or wont TM in response to our 500 * do TM request that may have been sent to 501 * determine kludge linemode support, process 502 * it, otherwise TM should get a negative 503 * response back. 504 */ 505 /* 506 * Handle the linemode kludge stuff. 507 * If we are not currently supporting any 508 * linemode at all, then we assume that this 509 * is the client telling us to use kludge 510 * linemode in response to our query. Set the 511 * linemode type that is to be supported, note 512 * that the client wishes to use linemode, and 513 * eat the will TM as though it never arrived. 514 */ 515 if (lmodetype < KLUDGE_LINEMODE) { 516 lmodetype = KLUDGE_LINEMODE; 517 clientstat(TELOPT_LINEMODE, WILL, 0); 518 send_wont(TELOPT_SGA, 1); 519 } else if (lmodetype == NO_AUTOKLUDGE) { 520 lmodetype = KLUDGE_OK; 521 } 522 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 523 /* 524 * We never respond to a WILL TM, and 525 * we leave the state WONT. 526 */ 527 return; 528 529 case TELOPT_LFLOW: 530 /* 531 * If we are going to support flow control 532 * option, then don't worry peer that we can't 533 * change the flow control characters. 534 */ 535 slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS; 536 slctab[SLC_XON].defset.flag |= SLC_DEFAULT; 537 slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS; 538 slctab[SLC_XOFF].defset.flag |= SLC_DEFAULT; 539 case TELOPT_TTYPE: 540 case TELOPT_SGA: 541 case TELOPT_NAWS: 542 case TELOPT_TSPEED: 543 case TELOPT_XDISPLOC: 544 case TELOPT_NEW_ENVIRON: 545 case TELOPT_OLD_ENVIRON: 546 changeok++; 547 break; 548 549 #ifdef LINEMODE 550 case TELOPT_LINEMODE: 551 # ifdef KLUDGELINEMODE 552 /* 553 * Note client's desire to use linemode. 554 */ 555 lmodetype = REAL_LINEMODE; 556 # endif /* KLUDGELINEMODE */ 557 func = doclientstat; 558 changeok++; 559 break; 560 #endif /* LINEMODE */ 561 562 #ifdef AUTHENTICATION 563 case TELOPT_AUTHENTICATION: 564 func = auth_request; 565 changeok++; 566 break; 567 #endif 568 569 570 default: 571 break; 572 } 573 if (changeok) { 574 set_his_want_state_will(option); 575 send_do(option, 0); 576 } else { 577 do_dont_resp[option]++; 578 send_dont(option, 0); 579 } 580 } else { 581 /* 582 * Option processing that should happen when 583 * we receive conformation of a change in 584 * state that we had requested. 585 */ 586 switch (option) { 587 case TELOPT_ECHO: 588 not42 = 0; /* looks like a 4.2 system */ 589 /* 590 * Egads, he responded "WILL ECHO". Turn 591 * it off right now! 592 */ 593 send_dont(option, 1); 594 /* 595 * "WILL ECHO". Kludge upon kludge! 596 * A 4.2 client is now echoing user input at 597 * the tty. This is probably undesireable and 598 * it should be stopped. The client will 599 * respond WONT TM to the DO TM that we send to 600 * check for kludge linemode. When the WONT TM 601 * arrives, linemode will be turned off and a 602 * change propogated to the pty. This change 603 * will cause us to process the new pty state 604 * in localstat(), which will notice that 605 * linemode is off and send a WILL ECHO 606 * so that we are properly in character mode and 607 * all is well. 608 */ 609 break; 610 #ifdef LINEMODE 611 case TELOPT_LINEMODE: 612 # ifdef KLUDGELINEMODE 613 /* 614 * Note client's desire to use linemode. 615 */ 616 lmodetype = REAL_LINEMODE; 617 # endif /* KLUDGELINEMODE */ 618 func = doclientstat; 619 break; 620 #endif /* LINEMODE */ 621 622 #ifdef AUTHENTICATION 623 case TELOPT_AUTHENTICATION: 624 func = auth_request; 625 break; 626 #endif 627 628 case TELOPT_LFLOW: 629 func = flowstat; 630 break; 631 } 632 } 633 } 634 set_his_state_will(option); 635 if (func) 636 (*func)(); 637 } /* end of willoption */ 638 639 void 640 send_dont(option, init) 641 int option, init; 642 { 643 if (init) { 644 if ((do_dont_resp[option] == 0 && his_state_is_wont(option)) || 645 his_want_state_is_wont(option)) 646 return; 647 set_his_want_state_wont(option); 648 do_dont_resp[option]++; 649 } 650 (void) sprintf(nfrontp, (char *)dont, option); 651 nfrontp += sizeof (doopt) - 2; 652 653 DIAG(TD_OPTIONS, printoption("td: send dont", option)); 654 } 655 656 void 657 wontoption(option) 658 int option; 659 { 660 /* 661 * Process client input. 662 */ 663 664 DIAG(TD_OPTIONS, printoption("td: recv wont", option)); 665 666 if (do_dont_resp[option]) { 667 do_dont_resp[option]--; 668 if (do_dont_resp[option] && his_state_is_wont(option)) 669 do_dont_resp[option]--; 670 } 671 if (do_dont_resp[option] == 0) { 672 if (his_want_state_is_will(option)) { 673 /* it is always ok to change to negative state */ 674 switch (option) { 675 case TELOPT_ECHO: 676 not42 = 1; /* doesn't seem to be a 4.2 system */ 677 break; 678 679 case TELOPT_BINARY: 680 init_termbuf(); 681 tty_binaryin(0); 682 set_termbuf(); 683 break; 684 685 #ifdef LINEMODE 686 case TELOPT_LINEMODE: 687 # ifdef KLUDGELINEMODE 688 /* 689 * If real linemode is supported, then client is 690 * asking to turn linemode off. 691 */ 692 if (lmodetype != REAL_LINEMODE) 693 break; 694 lmodetype = KLUDGE_LINEMODE; 695 # endif /* KLUDGELINEMODE */ 696 clientstat(TELOPT_LINEMODE, WONT, 0); 697 break; 698 #endif /* LINEMODE */ 699 700 case TELOPT_TM: 701 /* 702 * If we get a WONT TM, and had sent a DO TM, 703 * don't respond with a DONT TM, just leave it 704 * as is. Short circut the state machine to 705 * achive this. 706 */ 707 set_his_want_state_wont(TELOPT_TM); 708 return; 709 710 case TELOPT_LFLOW: 711 /* 712 * If we are not going to support flow control 713 * option, then let peer know that we can't 714 * change the flow control characters. 715 */ 716 slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS; 717 slctab[SLC_XON].defset.flag |= SLC_CANTCHANGE; 718 slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS; 719 slctab[SLC_XOFF].defset.flag |= SLC_CANTCHANGE; 720 break; 721 722 #if defined(AUTHENTICATION) 723 case TELOPT_AUTHENTICATION: 724 auth_finished(0, AUTH_REJECT); 725 break; 726 #endif 727 728 /* 729 * For options that we might spin waiting for 730 * sub-negotiation, if the client turns off the 731 * option rather than responding to the request, 732 * we have to treat it here as if we got a response 733 * to the sub-negotiation, (by updating the timers) 734 * so that we'll break out of the loop. 735 */ 736 case TELOPT_TTYPE: 737 settimer(ttypesubopt); 738 break; 739 740 case TELOPT_TSPEED: 741 settimer(tspeedsubopt); 742 break; 743 744 case TELOPT_XDISPLOC: 745 settimer(xdisplocsubopt); 746 break; 747 748 case TELOPT_OLD_ENVIRON: 749 settimer(oenvironsubopt); 750 break; 751 752 case TELOPT_NEW_ENVIRON: 753 settimer(environsubopt); 754 break; 755 756 default: 757 break; 758 } 759 set_his_want_state_wont(option); 760 if (his_state_is_will(option)) 761 send_dont(option, 0); 762 } else { 763 switch (option) { 764 case TELOPT_TM: 765 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 766 if (lmodetype < NO_AUTOKLUDGE) { 767 lmodetype = NO_LINEMODE; 768 clientstat(TELOPT_LINEMODE, WONT, 0); 769 send_will(TELOPT_SGA, 1); 770 send_will(TELOPT_ECHO, 1); 771 } 772 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 773 break; 774 775 #if defined(AUTHENTICATION) 776 case TELOPT_AUTHENTICATION: 777 auth_finished(0, AUTH_REJECT); 778 break; 779 #endif 780 default: 781 break; 782 } 783 } 784 } 785 set_his_state_wont(option); 786 787 } /* end of wontoption */ 788 789 void 790 send_will(option, init) 791 int option, init; 792 { 793 if (init) { 794 if ((will_wont_resp[option] == 0 && my_state_is_will(option))|| 795 my_want_state_is_will(option)) 796 return; 797 set_my_want_state_will(option); 798 will_wont_resp[option]++; 799 } 800 (void) sprintf(nfrontp, (char *)will, option); 801 nfrontp += sizeof (doopt) - 2; 802 803 DIAG(TD_OPTIONS, printoption("td: send will", option)); 804 } 805 806 #if !defined(LINEMODE) || !defined(KLUDGELINEMODE) 807 /* 808 * When we get a DONT SGA, we will try once to turn it 809 * back on. If the other side responds DONT SGA, we 810 * leave it at that. This is so that when we talk to 811 * clients that understand KLUDGELINEMODE but not LINEMODE, 812 * we'll keep them in char-at-a-time mode. 813 */ 814 int turn_on_sga = 0; 815 #endif 816 817 void 818 dooption(option) 819 int option; 820 { 821 int changeok = 0; 822 823 /* 824 * Process client input. 825 */ 826 827 DIAG(TD_OPTIONS, printoption("td: recv do", option)); 828 829 if (will_wont_resp[option]) { 830 will_wont_resp[option]--; 831 if (will_wont_resp[option] && my_state_is_will(option)) 832 will_wont_resp[option]--; 833 } 834 if ((will_wont_resp[option] == 0) && (my_want_state_is_wont(option))) { 835 switch (option) { 836 case TELOPT_ECHO: 837 #ifdef LINEMODE 838 # ifdef KLUDGELINEMODE 839 if (lmodetype == NO_LINEMODE) 840 # else 841 if (his_state_is_wont(TELOPT_LINEMODE)) 842 # endif 843 #endif 844 { 845 init_termbuf(); 846 tty_setecho(1); 847 set_termbuf(); 848 } 849 changeok++; 850 break; 851 852 case TELOPT_BINARY: 853 init_termbuf(); 854 tty_binaryout(1); 855 set_termbuf(); 856 changeok++; 857 break; 858 859 case TELOPT_SGA: 860 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 861 /* 862 * If kludge linemode is in use, then we must 863 * process an incoming do SGA for linemode 864 * purposes. 865 */ 866 if (lmodetype == KLUDGE_LINEMODE) { 867 /* 868 * Receipt of "do SGA" in kludge 869 * linemode is the peer asking us to 870 * turn off linemode. Make note of 871 * the request. 872 */ 873 clientstat(TELOPT_LINEMODE, WONT, 0); 874 /* 875 * If linemode did not get turned off 876 * then don't tell peer that we did. 877 * Breaking here forces a wont SGA to 878 * be returned. 879 */ 880 if (linemode) 881 break; 882 } 883 #else 884 turn_on_sga = 0; 885 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 886 changeok++; 887 break; 888 889 case TELOPT_STATUS: 890 changeok++; 891 break; 892 893 case TELOPT_TM: 894 /* 895 * Special case for TM. We send a WILL, but 896 * pretend we sent a WONT. 897 */ 898 send_will(option, 0); 899 set_my_want_state_wont(option); 900 set_my_state_wont(option); 901 return; 902 903 case TELOPT_LOGOUT: 904 /* 905 * When we get a LOGOUT option, respond 906 * with a WILL LOGOUT, make sure that 907 * it gets written out to the network, 908 * and then just go away... 909 */ 910 set_my_want_state_will(TELOPT_LOGOUT); 911 send_will(TELOPT_LOGOUT, 0); 912 set_my_state_will(TELOPT_LOGOUT); 913 (void)netflush(); 914 cleanup(0); 915 /* NOT REACHED */ 916 break; 917 918 case TELOPT_LINEMODE: 919 case TELOPT_TTYPE: 920 case TELOPT_NAWS: 921 case TELOPT_TSPEED: 922 case TELOPT_LFLOW: 923 case TELOPT_XDISPLOC: 924 #ifdef TELOPT_ENVIRON 925 case TELOPT_NEW_ENVIRON: 926 #endif 927 case TELOPT_OLD_ENVIRON: 928 default: 929 break; 930 } 931 if (changeok) { 932 set_my_want_state_will(option); 933 send_will(option, 0); 934 } else { 935 will_wont_resp[option]++; 936 send_wont(option, 0); 937 } 938 } 939 set_my_state_will(option); 940 941 } /* end of dooption */ 942 943 void 944 send_wont(option, init) 945 int option, init; 946 { 947 if (init) { 948 if ((will_wont_resp[option] == 0 && my_state_is_wont(option)) || 949 my_want_state_is_wont(option)) 950 return; 951 set_my_want_state_wont(option); 952 will_wont_resp[option]++; 953 } 954 (void) sprintf(nfrontp, (char *)wont, option); 955 nfrontp += sizeof (wont) - 2; 956 957 DIAG(TD_OPTIONS, printoption("td: send wont", option)); 958 } 959 960 void 961 dontoption(option) 962 int option; 963 { 964 /* 965 * Process client input. 966 */ 967 968 969 DIAG(TD_OPTIONS, printoption("td: recv dont", option)); 970 971 if (will_wont_resp[option]) { 972 will_wont_resp[option]--; 973 if (will_wont_resp[option] && my_state_is_wont(option)) 974 will_wont_resp[option]--; 975 } 976 if ((will_wont_resp[option] == 0) && (my_want_state_is_will(option))) { 977 switch (option) { 978 case TELOPT_BINARY: 979 init_termbuf(); 980 tty_binaryout(0); 981 set_termbuf(); 982 break; 983 984 case TELOPT_ECHO: /* we should stop echoing */ 985 #ifdef LINEMODE 986 # ifdef KLUDGELINEMODE 987 if ((lmodetype != REAL_LINEMODE) && 988 (lmodetype != KLUDGE_LINEMODE)) 989 # else 990 if (his_state_is_wont(TELOPT_LINEMODE)) 991 # endif 992 #endif 993 { 994 init_termbuf(); 995 tty_setecho(0); 996 set_termbuf(); 997 } 998 break; 999 1000 case TELOPT_SGA: 1001 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 1002 /* 1003 * If kludge linemode is in use, then we 1004 * must process an incoming do SGA for 1005 * linemode purposes. 1006 */ 1007 if ((lmodetype == KLUDGE_LINEMODE) || 1008 (lmodetype == KLUDGE_OK)) { 1009 /* 1010 * The client is asking us to turn 1011 * linemode on. 1012 */ 1013 lmodetype = KLUDGE_LINEMODE; 1014 clientstat(TELOPT_LINEMODE, WILL, 0); 1015 /* 1016 * If we did not turn line mode on, 1017 * then what do we say? Will SGA? 1018 * This violates design of telnet. 1019 * Gross. Very Gross. 1020 */ 1021 } 1022 break; 1023 #else 1024 set_my_want_state_wont(option); 1025 if (my_state_is_will(option)) 1026 send_wont(option, 0); 1027 set_my_state_wont(option); 1028 if (turn_on_sga ^= 1) 1029 send_will(option, 1); 1030 return; 1031 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 1032 1033 default: 1034 break; 1035 } 1036 1037 set_my_want_state_wont(option); 1038 if (my_state_is_will(option)) 1039 send_wont(option, 0); 1040 } 1041 set_my_state_wont(option); 1042 1043 } /* end of dontoption */ 1044 1045 #ifdef ENV_HACK 1046 int env_ovar = -1; 1047 int env_ovalue = -1; 1048 #else /* ENV_HACK */ 1049 # define env_ovar OLD_ENV_VAR 1050 # define env_ovalue OLD_ENV_VALUE 1051 #endif /* ENV_HACK */ 1052 1053 /* 1054 * suboption() 1055 * 1056 * Look at the sub-option buffer, and try to be helpful to the other 1057 * side. 1058 * 1059 * Currently we recognize: 1060 * 1061 * Terminal type is 1062 * Linemode 1063 * Window size 1064 * Terminal speed 1065 */ 1066 void 1067 suboption() 1068 { 1069 register int subchar; 1070 1071 DIAG(TD_OPTIONS, {netflush(); printsub('<', subpointer, SB_LEN()+2);}); 1072 1073 subchar = SB_GET(); 1074 switch (subchar) { 1075 case TELOPT_TSPEED: { 1076 register int xspeed, rspeed; 1077 1078 if (his_state_is_wont(TELOPT_TSPEED)) /* Ignore if option disabled */ 1079 break; 1080 1081 settimer(tspeedsubopt); 1082 1083 if (SB_EOF() || SB_GET() != TELQUAL_IS) 1084 return; 1085 1086 xspeed = atoi((char *)subpointer); 1087 1088 while (SB_GET() != ',' && !SB_EOF()); 1089 if (SB_EOF()) 1090 return; 1091 1092 rspeed = atoi((char *)subpointer); 1093 clientstat(TELOPT_TSPEED, xspeed, rspeed); 1094 1095 break; 1096 1097 } /* end of case TELOPT_TSPEED */ 1098 1099 case TELOPT_TTYPE: { /* Yaaaay! */ 1100 static char terminalname[41]; 1101 1102 if (his_state_is_wont(TELOPT_TTYPE)) /* Ignore if option disabled */ 1103 break; 1104 settimer(ttypesubopt); 1105 1106 if (SB_EOF() || SB_GET() != TELQUAL_IS) { 1107 return; /* ??? XXX but, this is the most robust */ 1108 } 1109 1110 terminaltype = terminalname; 1111 1112 while ((terminaltype < (terminalname + sizeof terminalname-1)) && 1113 !SB_EOF()) { 1114 register int c; 1115 1116 c = SB_GET(); 1117 if (isupper(c)) { 1118 c = tolower(c); 1119 } 1120 *terminaltype++ = c; /* accumulate name */ 1121 } 1122 *terminaltype = 0; 1123 terminaltype = terminalname; 1124 break; 1125 } /* end of case TELOPT_TTYPE */ 1126 1127 case TELOPT_NAWS: { 1128 register int xwinsize, ywinsize; 1129 1130 if (his_state_is_wont(TELOPT_NAWS)) /* Ignore if option disabled */ 1131 break; 1132 1133 if (SB_EOF()) 1134 return; 1135 xwinsize = SB_GET() << 8; 1136 if (SB_EOF()) 1137 return; 1138 xwinsize |= SB_GET(); 1139 if (SB_EOF()) 1140 return; 1141 ywinsize = SB_GET() << 8; 1142 if (SB_EOF()) 1143 return; 1144 ywinsize |= SB_GET(); 1145 clientstat(TELOPT_NAWS, xwinsize, ywinsize); 1146 1147 break; 1148 1149 } /* end of case TELOPT_NAWS */ 1150 1151 #ifdef LINEMODE 1152 case TELOPT_LINEMODE: { 1153 register int request; 1154 1155 if (his_state_is_wont(TELOPT_LINEMODE)) /* Ignore if option disabled */ 1156 break; 1157 /* 1158 * Process linemode suboptions. 1159 */ 1160 if (SB_EOF()) 1161 break; /* garbage was sent */ 1162 request = SB_GET(); /* get will/wont */ 1163 1164 if (SB_EOF()) 1165 break; /* another garbage check */ 1166 1167 if (request == LM_SLC) { /* SLC is not preceeded by WILL or WONT */ 1168 /* 1169 * Process suboption buffer of slc's 1170 */ 1171 start_slc(1); 1172 do_opt_slc(subpointer, subend - subpointer); 1173 (void) end_slc(0); 1174 break; 1175 } else if (request == LM_MODE) { 1176 if (SB_EOF()) 1177 return; 1178 useeditmode = SB_GET(); /* get mode flag */ 1179 clientstat(LM_MODE, 0, 0); 1180 break; 1181 } 1182 1183 if (SB_EOF()) 1184 break; 1185 switch (SB_GET()) { /* what suboption? */ 1186 case LM_FORWARDMASK: 1187 /* 1188 * According to spec, only server can send request for 1189 * forwardmask, and client can only return a positive response. 1190 * So don't worry about it. 1191 */ 1192 1193 default: 1194 break; 1195 } 1196 break; 1197 } /* end of case TELOPT_LINEMODE */ 1198 #endif 1199 case TELOPT_STATUS: { 1200 int mode; 1201 1202 if (SB_EOF()) 1203 break; 1204 mode = SB_GET(); 1205 switch (mode) { 1206 case TELQUAL_SEND: 1207 if (my_state_is_will(TELOPT_STATUS)) 1208 send_status(); 1209 break; 1210 1211 case TELQUAL_IS: 1212 break; 1213 1214 default: 1215 break; 1216 } 1217 break; 1218 } /* end of case TELOPT_STATUS */ 1219 1220 case TELOPT_XDISPLOC: { 1221 if (SB_EOF() || SB_GET() != TELQUAL_IS) 1222 return; 1223 settimer(xdisplocsubopt); 1224 subpointer[SB_LEN()] = '\0'; 1225 (void)setenv("DISPLAY", (char *)subpointer, 1); 1226 break; 1227 } /* end of case TELOPT_XDISPLOC */ 1228 1229 #ifdef TELOPT_NEW_ENVIRON 1230 case TELOPT_NEW_ENVIRON: 1231 #endif 1232 case TELOPT_OLD_ENVIRON: { 1233 register int c; 1234 register char *cp, *varp, *valp; 1235 1236 if (SB_EOF()) 1237 return; 1238 c = SB_GET(); 1239 if (c == TELQUAL_IS) { 1240 if (subchar == TELOPT_OLD_ENVIRON) 1241 settimer(oenvironsubopt); 1242 else 1243 settimer(environsubopt); 1244 } else if (c != TELQUAL_INFO) { 1245 return; 1246 } 1247 1248 #ifdef TELOPT_NEW_ENVIRON 1249 if (subchar == TELOPT_NEW_ENVIRON) { 1250 while (!SB_EOF()) { 1251 c = SB_GET(); 1252 if ((c == NEW_ENV_VAR) || (c == ENV_USERVAR)) 1253 break; 1254 } 1255 } else 1256 #endif 1257 { 1258 #ifdef ENV_HACK 1259 /* 1260 * We only want to do this if we haven't already decided 1261 * whether or not the other side has its VALUE and VAR 1262 * reversed. 1263 */ 1264 if (env_ovar < 0) { 1265 register int last = -1; /* invalid value */ 1266 int empty = 0; 1267 int got_var = 0, got_value = 0, got_uservar = 0; 1268 1269 /* 1270 * The other side might have its VALUE and VAR values 1271 * reversed. To be interoperable, we need to determine 1272 * which way it is. If the first recognized character 1273 * is a VAR or VALUE, then that will tell us what 1274 * type of client it is. If the fist recognized 1275 * character is a USERVAR, then we continue scanning 1276 * the suboption looking for two consecutive 1277 * VAR or VALUE fields. We should not get two 1278 * consecutive VALUE fields, so finding two 1279 * consecutive VALUE or VAR fields will tell us 1280 * what the client is. 1281 */ 1282 SB_SAVE(); 1283 while (!SB_EOF()) { 1284 c = SB_GET(); 1285 switch(c) { 1286 case OLD_ENV_VAR: 1287 if (last < 0 || last == OLD_ENV_VAR 1288 || (empty && (last == OLD_ENV_VALUE))) 1289 goto env_ovar_ok; 1290 got_var++; 1291 last = OLD_ENV_VAR; 1292 break; 1293 case OLD_ENV_VALUE: 1294 if (last < 0 || last == OLD_ENV_VALUE 1295 || (empty && (last == OLD_ENV_VAR))) 1296 goto env_ovar_wrong; 1297 got_value++; 1298 last = OLD_ENV_VALUE; 1299 break; 1300 case ENV_USERVAR: 1301 /* count strings of USERVAR as one */ 1302 if (last != ENV_USERVAR) 1303 got_uservar++; 1304 if (empty) { 1305 if (last == OLD_ENV_VALUE) 1306 goto env_ovar_ok; 1307 if (last == OLD_ENV_VAR) 1308 goto env_ovar_wrong; 1309 } 1310 last = ENV_USERVAR; 1311 break; 1312 case ENV_ESC: 1313 if (!SB_EOF()) 1314 c = SB_GET(); 1315 /* FALL THROUGH */ 1316 default: 1317 empty = 0; 1318 continue; 1319 } 1320 empty = 1; 1321 } 1322 if (empty) { 1323 if (last == OLD_ENV_VALUE) 1324 goto env_ovar_ok; 1325 if (last == OLD_ENV_VAR) 1326 goto env_ovar_wrong; 1327 } 1328 /* 1329 * Ok, the first thing was a USERVAR, and there 1330 * are not two consecutive VAR or VALUE commands, 1331 * and none of the VAR or VALUE commands are empty. 1332 * If the client has sent us a well-formed option, 1333 * then the number of VALUEs received should always 1334 * be less than or equal to the number of VARs and 1335 * USERVARs received. 1336 * 1337 * If we got exactly as many VALUEs as VARs and 1338 * USERVARs, the client has the same definitions. 1339 * 1340 * If we got exactly as many VARs as VALUEs and 1341 * USERVARS, the client has reversed definitions. 1342 */ 1343 if (got_uservar + got_var == got_value) { 1344 env_ovar_ok: 1345 env_ovar = OLD_ENV_VAR; 1346 env_ovalue = OLD_ENV_VALUE; 1347 } else if (got_uservar + got_value == got_var) { 1348 env_ovar_wrong: 1349 env_ovar = OLD_ENV_VALUE; 1350 env_ovalue = OLD_ENV_VAR; 1351 DIAG(TD_OPTIONS, {sprintf(nfrontp, 1352 "ENVIRON VALUE and VAR are reversed!\r\n"); 1353 nfrontp += strlen(nfrontp);}); 1354 1355 } 1356 } 1357 SB_RESTORE(); 1358 #endif 1359 1360 while (!SB_EOF()) { 1361 c = SB_GET(); 1362 if ((c == env_ovar) || (c == ENV_USERVAR)) 1363 break; 1364 } 1365 } 1366 1367 if (SB_EOF()) 1368 return; 1369 1370 cp = varp = (char *)subpointer; 1371 valp = 0; 1372 1373 while (!SB_EOF()) { 1374 c = SB_GET(); 1375 if (subchar == TELOPT_OLD_ENVIRON) { 1376 if (c == env_ovar) 1377 c = NEW_ENV_VAR; 1378 else if (c == env_ovalue) 1379 c = NEW_ENV_VALUE; 1380 } 1381 switch (c) { 1382 1383 case NEW_ENV_VALUE: 1384 *cp = '\0'; 1385 cp = valp = (char *)subpointer; 1386 break; 1387 1388 case NEW_ENV_VAR: 1389 case ENV_USERVAR: 1390 *cp = '\0'; 1391 if (valp) 1392 (void)setenv(varp, valp, 1); 1393 else 1394 unsetenv(varp); 1395 cp = varp = (char *)subpointer; 1396 valp = 0; 1397 break; 1398 1399 case ENV_ESC: 1400 if (SB_EOF()) 1401 break; 1402 c = SB_GET(); 1403 /* FALL THROUGH */ 1404 default: 1405 *cp++ = c; 1406 break; 1407 } 1408 } 1409 *cp = '\0'; 1410 if (valp) 1411 (void)setenv(varp, valp, 1); 1412 else 1413 unsetenv(varp); 1414 break; 1415 } /* end of case TELOPT_NEW_ENVIRON */ 1416 #if defined(AUTHENTICATION) 1417 case TELOPT_AUTHENTICATION: 1418 if (SB_EOF()) 1419 break; 1420 switch(SB_GET()) { 1421 case TELQUAL_SEND: 1422 case TELQUAL_REPLY: 1423 /* 1424 * These are sent by us and cannot be sent by 1425 * the client. 1426 */ 1427 break; 1428 case TELQUAL_IS: 1429 auth_is(subpointer, SB_LEN()); 1430 break; 1431 case TELQUAL_NAME: 1432 auth_name(subpointer, SB_LEN()); 1433 break; 1434 } 1435 break; 1436 #endif 1437 1438 default: 1439 break; 1440 } /* end of switch */ 1441 1442 } /* end of suboption */ 1443 1444 void 1445 doclientstat() 1446 { 1447 clientstat(TELOPT_LINEMODE, WILL, 0); 1448 } 1449 1450 #define ADD(c) *ncp++ = c; 1451 #define ADD_DATA(c) { *ncp++ = c; if (c == SE) *ncp++ = c; } 1452 void 1453 send_status() 1454 { 1455 unsigned char statusbuf[256]; 1456 register unsigned char *ncp; 1457 register unsigned char i; 1458 1459 ncp = statusbuf; 1460 1461 netflush(); /* get rid of anything waiting to go out */ 1462 1463 ADD(IAC); 1464 ADD(SB); 1465 ADD(TELOPT_STATUS); 1466 ADD(TELQUAL_IS); 1467 1468 /* 1469 * We check the want_state rather than the current state, 1470 * because if we received a DO/WILL for an option that we 1471 * don't support, and the other side didn't send a DONT/WONT 1472 * in response to our WONT/DONT, then the "state" will be 1473 * WILL/DO, and the "want_state" will be WONT/DONT. We 1474 * need to go by the latter. 1475 */ 1476 for (i = 0; i < (unsigned char)NTELOPTS; i++) { 1477 if (my_want_state_is_will(i)) { 1478 ADD(WILL); 1479 ADD_DATA(i); 1480 if (i == IAC) 1481 ADD(IAC); 1482 } 1483 if (his_want_state_is_will(i)) { 1484 ADD(DO); 1485 ADD_DATA(i); 1486 if (i == IAC) 1487 ADD(IAC); 1488 } 1489 } 1490 1491 if (his_want_state_is_will(TELOPT_LFLOW)) { 1492 ADD(SB); 1493 ADD(TELOPT_LFLOW); 1494 if (flowmode) { 1495 ADD(LFLOW_ON); 1496 } else { 1497 ADD(LFLOW_OFF); 1498 } 1499 ADD(SE); 1500 1501 if (restartany >= 0) { 1502 ADD(SB) 1503 ADD(TELOPT_LFLOW); 1504 if (restartany) { 1505 ADD(LFLOW_RESTART_ANY); 1506 } else { 1507 ADD(LFLOW_RESTART_XON); 1508 } 1509 ADD(SE) 1510 ADD(SB); 1511 } 1512 } 1513 1514 #ifdef LINEMODE 1515 if (his_want_state_is_will(TELOPT_LINEMODE)) { 1516 unsigned char *cp, *cpe; 1517 int len; 1518 1519 ADD(SB); 1520 ADD(TELOPT_LINEMODE); 1521 ADD(LM_MODE); 1522 ADD_DATA(editmode); 1523 if (editmode == IAC) 1524 ADD(IAC); 1525 ADD(SE); 1526 1527 ADD(SB); 1528 ADD(TELOPT_LINEMODE); 1529 ADD(LM_SLC); 1530 start_slc(0); 1531 send_slc(); 1532 len = end_slc(&cp); 1533 for (cpe = cp + len; cp < cpe; cp++) 1534 ADD_DATA(*cp); 1535 ADD(SE); 1536 } 1537 #endif /* LINEMODE */ 1538 1539 ADD(IAC); 1540 ADD(SE); 1541 1542 writenet(statusbuf, ncp - statusbuf); 1543 netflush(); /* Send it on its way */ 1544 1545 DIAG(TD_OPTIONS, 1546 {printsub('>', statusbuf, ncp - statusbuf); netflush();}); 1547 } 1548
Indexes created Wed Sep 24 15:09:51 GMT 2025