xref: /src/libexec/telnetd/termstat.c

/*	$NetBSD: termstat.c,v 1.13 2003/08/07 09:46:52 agc Exp $	*/

/*
 * Copyright (c) 1989, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
#ifndef lint
#if 0
static char sccsid[] = "@(#)termstat.c	8.2 (Berkeley) 5/30/95";
#else
__RCSID("$NetBSD: termstat.c,v 1.13 2003/08/07 09:46:52 agc Exp $");
#endif
#endif /* not lint */

#include "telnetd.h"

#ifdef ENCRYPTION
#include <libtelnet/encrypt.h>
#endif

/*
 * local variables
 */
int def_tspeed = -1, def_rspeed = -1;
int def_row = 0, def_col = 0;
#ifdef	LINEMODE
static int _terminit = 0;
#endif	/* LINEMODE */


#ifdef	LINEMODE
/*
 * localstat
 *
 * This function handles all management of linemode.
 *
 * Linemode allows the client to do the local editing of data
 * and send only complete lines to the server.  Linemode state is
 * based on the state of the pty driver.  If the pty is set for
 * external processing, then we can use linemode.  Further, if we
 * can use real linemode, then we can look at the edit control bits
 * in the pty to determine what editing the client should do.
 *
 * Linemode support uses the following state flags to keep track of
 * current and desired linemode state.
 *	alwayslinemode : true if -l was specified on the telnetd
 * 	command line.  It means to have linemode on as much as
 *	possible.
 *
 * 	lmodetype: signifies whether the client can
 *	handle real linemode, or if use of kludgeomatic linemode
 *	is preferred.  It will be set to one of the following:
 *		REAL_LINEMODE : use linemode option
 *		NO_KLUDGE : don't initiate kludge linemode.
 *		KLUDGE_LINEMODE : use kludge linemode
 *		NO_LINEMODE : client is ignorant of linemode
 *
 *	linemode, uselinemode : linemode is true if linemode
 *	is currently on, uselinemode is the state that we wish
 *	to be in.  If another function wishes to turn linemode
 *	on or off, it sets or clears uselinemode.
 *
 *	editmode, useeditmode : like linemode/uselinemode, but
 *	these contain the edit mode states (edit and trapsig).
 *
 * The state variables correspond to some of the state information
 * in the pty.
 *	linemode:
 *		In real linemode, this corresponds to whether the pty
 *		expects external processing of incoming data.
 *		In kludge linemode, this more closely corresponds to the
 *		whether normal processing is on or not.  (ICANON in
 *		system V, or COOKED mode in BSD.)
 *		If the -l option was specified (alwayslinemode), then
 *		an attempt is made to force external processing on at
 *		all times.
 *
 * The following heuristics are applied to determine linemode
 * handling within the server.
 *	1) Early on in starting up the server, an attempt is made
 *	   to negotiate the linemode option.  If this succeeds
 *	   then lmodetype is set to REAL_LINEMODE and all linemode
 *	   processing occurs in the context of the linemode option.
 *	2) If the attempt to negotiate the linemode option failed,
 *	   and the "-k" (don't initiate kludge linemode) isn't set,
 *	   then we try to use kludge linemode.  We test for this
 *	   capability by sending "do Timing Mark".  If a positive
 *	   response comes back, then we assume that the client
 *	   understands kludge linemode (ech!) and the
 *	   lmodetype flag is set to KLUDGE_LINEMODE.
 *	3) Otherwise, linemode is not supported at all and
 *	   lmodetype remains set to NO_LINEMODE (which happens
 *	   to be 0 for convenience).
 *	4) At any time a command arrives that implies a higher
 *	   state of linemode support in the client, we move to that
 *	   linemode support.
 *
 * A short explanation of kludge linemode is in order here.
 *	1) The heuristic to determine support for kludge linemode
 *	   is to send a do timing mark.  We assume that a client
 *	   that supports timing marks also supports kludge linemode.
 *	   A risky proposition at best.
 *	2) Further negotiation of linemode is done by changing the
 *	   the server's state regarding SGA.  If server will SGA,
 *	   then linemode is off, if server won't SGA, then linemode
 *	   is on.
 */
void
localstat()
{
	int need_will_echo = 0;


	/*
	 * Check for state of BINARY options.
	 */
	if (tty_isbinaryin()) {
		if (his_want_state_is_wont(TELOPT_BINARY))
			send_do(TELOPT_BINARY, 1);
	} else {
		if (his_want_state_is_will(TELOPT_BINARY))
			send_dont(TELOPT_BINARY, 1);
	}

	if (tty_isbinaryout()) {
		if (my_want_state_is_wont(TELOPT_BINARY))
			send_will(TELOPT_BINARY, 1);
	} else {
		if (my_want_state_is_will(TELOPT_BINARY))
			send_wont(TELOPT_BINARY, 1);
	}

	/*
	 * Check for changes to flow control if client supports it.
	 */
	flowstat();

	/*
	 * Check linemode on/off state
	 */
	uselinemode = tty_linemode();

	/*
	 * If alwayslinemode is on, and pty is changing to turn it off, then
	 * force linemode back on.
	 */
	if (alwayslinemode && linemode && !uselinemode) {
		uselinemode = 1;
		tty_setlinemode(uselinemode);
	}

#ifdef	ENCRYPTION
	/*
	 * If the terminal is not echoing, but editing is enabled,
	 * something like password input is going to happen, so
	 * if we the other side is not currently sending encrypted
	 * data, ask the other side to start encrypting.
	 */
	if (his_state_is_will(TELOPT_ENCRYPT)) {
		static int enc_passwd = 0;
		if (uselinemode && !tty_isecho() && tty_isediting()
		    && (enc_passwd == 0) && !decrypt_input) {
			encrypt_send_request_start();
			enc_passwd = 1;
		} else if (enc_passwd) {
			encrypt_send_request_end();
			enc_passwd = 0;
		}
	}
#endif	/* ENCRYPTION */

	/*
	 * Do echo mode handling as soon as we know what the
	 * linemode is going to be.
	 * If the pty has echo turned off, then tell the client that
	 * the server will echo.  If echo is on, then the server
	 * will echo if in character mode, but in linemode the
	 * client should do local echoing.  The state machine will
	 * not send anything if it is unnecessary, so don't worry
	 * about that here.
	 *
	 * If we need to send the WILL ECHO (because echo is off),
	 * then delay that until after we have changed the MODE.
	 * This way, when the user is turning off both editing
	 * and echo, the client will get editing turned off first.
	 * This keeps the client from going into encryption mode
	 * and then right back out if it is doing auto-encryption
	 * when passwords are being typed.
	 */
	if (uselinemode) {
		if (tty_isecho())
			send_wont(TELOPT_ECHO, 1);
		else
			need_will_echo = 1;
#ifdef	KLUDGELINEMODE
		if (lmodetype == KLUDGE_OK)
			lmodetype = KLUDGE_LINEMODE;
#endif
	}

	/*
	 * If linemode is being turned off, send appropriate
	 * command and then we're all done.
	 */
	 if (!uselinemode && linemode) {
# ifdef	KLUDGELINEMODE
		if (lmodetype == REAL_LINEMODE) {
# endif	/* KLUDGELINEMODE */
			send_dont(TELOPT_LINEMODE, 1);
# ifdef	KLUDGELINEMODE
		} else if (lmodetype == KLUDGE_LINEMODE)
			send_will(TELOPT_SGA, 1);
# endif	/* KLUDGELINEMODE */
		send_will(TELOPT_ECHO, 1);
		linemode = uselinemode;
		goto done;
	}

# ifdef	KLUDGELINEMODE
	/*
	 * If using real linemode check edit modes for possible later use.
	 * If we are in kludge linemode, do the SGA negotiation.
	 */
	if (lmodetype == REAL_LINEMODE) {
# endif	/* KLUDGELINEMODE */
		useeditmode = 0;
		if (tty_isediting())
			useeditmode |= MODE_EDIT;
		if (tty_istrapsig())
			useeditmode |= MODE_TRAPSIG;
		if (tty_issofttab())
			useeditmode |= MODE_SOFT_TAB;
		if (tty_islitecho())
			useeditmode |= MODE_LIT_ECHO;
# ifdef	KLUDGELINEMODE
	} else if (lmodetype == KLUDGE_LINEMODE) {
		if (tty_isediting() && uselinemode)
			send_wont(TELOPT_SGA, 1);
		else
			send_will(TELOPT_SGA, 1);
	}
# endif	/* KLUDGELINEMODE */

	/*
	 * Negotiate linemode on if pty state has changed to turn it on.
	 * Send appropriate command and send along edit mode, then all done.
	 */
	if (uselinemode && !linemode) {
# ifdef	KLUDGELINEMODE
		if (lmodetype == KLUDGE_LINEMODE) {
			send_wont(TELOPT_SGA, 1);
		} else if (lmodetype == REAL_LINEMODE) {
# endif	/* KLUDGELINEMODE */
			send_do(TELOPT_LINEMODE, 1);
			/* send along edit modes */
			(void) output_data("%c%c%c%c%c%c%c", IAC, SB,
				TELOPT_LINEMODE, LM_MODE, useeditmode,
				IAC, SE);
			editmode = useeditmode;
# ifdef	KLUDGELINEMODE
		}
# endif	/* KLUDGELINEMODE */
		linemode = uselinemode;
		goto done;
	}

# ifdef	KLUDGELINEMODE
	/*
	 * None of what follows is of any value if not using
	 * real linemode.
	 */
	if (lmodetype < REAL_LINEMODE)
		goto done;
# endif	/* KLUDGELINEMODE */

	if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
		/*
		 * If edit mode changed, send edit mode.
		 */
		 if (useeditmode != editmode) {
			/*
			 * Send along appropriate edit mode mask.
			 */
			(void) output_data("%c%c%c%c%c%c%c", IAC, SB,
				TELOPT_LINEMODE, LM_MODE, useeditmode,
				IAC, SE);
			editmode = useeditmode;
		}


		/*
		 * Check for changes to special characters in use.
		 */
		start_slc(0);
		check_slc();
		(void) end_slc(0);
	}

done:
	if (need_will_echo)
		send_will(TELOPT_ECHO, 1);
	/*
	 * Some things should be deferred until after the pty state has
	 * been set by the local process.  Do those things that have been
	 * deferred now.  This only happens once.
	 */
	if (_terminit == 0) {
		_terminit = 1;
		defer_terminit();
	}

	netflush();
	set_termbuf();
	return;

}  /* end of localstat */
#endif	/* LINEMODE */

/*
 * flowstat
 *
 * Check for changes to flow control
 */
void
flowstat()
{
	if (his_state_is_will(TELOPT_LFLOW)) {
		if (tty_flowmode() != flowmode) {
			flowmode = tty_flowmode();
			(void) output_data("%c%c%c%c%c%c",
					IAC, SB, TELOPT_LFLOW,
					flowmode ? LFLOW_ON : LFLOW_OFF,
					IAC, SE);
		}
		if (tty_restartany() != restartany) {
			restartany = tty_restartany();
			(void) output_data("%c%c%c%c%c%c",
					IAC, SB, TELOPT_LFLOW,
					restartany ? LFLOW_RESTART_ANY
						   : LFLOW_RESTART_XON,
					IAC, SE);
		}
	}
}

/*
 * clientstat
 *
 * Process linemode related requests from the client.
 * Client can request a change to only one of linemode, editmode or slc's
 * at a time, and if using kludge linemode, then only linemode may be
 * affected.
 */
void
clientstat(code, parm1, parm2)
	register int code, parm1, parm2;
{

	/*
	 * Get a copy of terminal characteristics.
	 */
	init_termbuf();

	/*
	 * Process request from client. code tells what it is.
	 */
	switch (code) {
#ifdef	LINEMODE
	case TELOPT_LINEMODE:
		/*
		 * Don't do anything unless client is asking us to change
		 * modes.
		 */
		uselinemode = (parm1 == WILL);
		if (uselinemode != linemode) {
# ifdef	KLUDGELINEMODE
			/*
			 * If using kludge linemode, make sure that
			 * we can do what the client asks.
			 * We can not turn off linemode if alwayslinemode
			 * and the ICANON bit is set.
			 */
			if (lmodetype == KLUDGE_LINEMODE) {
				if (alwayslinemode && tty_isediting()) {
					uselinemode = 1;
				}
			}

			/*
			 * Quit now if we can't do it.
			 */
			if (uselinemode == linemode)
				return;

			/*
			 * If using real linemode and linemode is being
			 * turned on, send along the edit mode mask.
			 */
			if (lmodetype == REAL_LINEMODE && uselinemode)
# else	/* KLUDGELINEMODE */
			if (uselinemode)
# endif	/* KLUDGELINEMODE */
			{
				useeditmode = 0;
				if (tty_isediting())
					useeditmode |= MODE_EDIT;
				if (tty_istrapsig())
					useeditmode |= MODE_TRAPSIG;
				if (tty_issofttab())
					useeditmode |= MODE_SOFT_TAB;
				if (tty_islitecho())
					useeditmode |= MODE_LIT_ECHO;
				(void) output_data("%c%c%c%c%c%c%c", IAC,
					SB, TELOPT_LINEMODE, LM_MODE,
							useeditmode, IAC, SE);
				editmode = useeditmode;
			}


			tty_setlinemode(uselinemode);

			linemode = uselinemode;

			if (!linemode)
				send_will(TELOPT_ECHO, 1);
		}
		break;

	case LM_MODE:
	    {
		register int ack, changed;

		/*
		 * Client has sent along a mode mask.  If it agrees with
		 * what we are currently doing, ignore it; if not, it could
		 * be viewed as a request to change.  Note that the server
		 * will change to the modes in an ack if it is different from
		 * what we currently have, but we will not ack the ack.
		 */
		 useeditmode &= MODE_MASK;
		 ack = (useeditmode & MODE_ACK);
		 useeditmode &= ~MODE_ACK;

		 if ((changed = (useeditmode ^ editmode))) {
			/*
			 * This check is for a timing problem.  If the
			 * state of the tty has changed (due to the user
			 * application) we need to process that info
			 * before we write in the state contained in the
			 * ack!!!  This gets out the new MODE request,
			 * and when the ack to that command comes back
			 * we'll set it and be in the right mode.
			 */
			if (ack)
				localstat();
			if (changed & MODE_EDIT)
				tty_setedit(useeditmode & MODE_EDIT);

			if (changed & MODE_TRAPSIG)
				tty_setsig(useeditmode & MODE_TRAPSIG);

			if (changed & MODE_SOFT_TAB)
				tty_setsofttab(useeditmode & MODE_SOFT_TAB);

			if (changed & MODE_LIT_ECHO)
				tty_setlitecho(useeditmode & MODE_LIT_ECHO);

			set_termbuf();

 			if (!ack) {
 				(void) output_data("%c%c%c%c%c%c%c", IAC,
					SB, TELOPT_LINEMODE, LM_MODE,
 					useeditmode|MODE_ACK,
 					IAC, SE);
 			}

			editmode = useeditmode;
		}

		break;

	    }  /* end of case LM_MODE */
#endif	/* LINEMODE */

	case TELOPT_NAWS:
	    {
		struct winsize ws;

		def_col = parm1;
		def_row = parm2;
#ifdef	LINEMODE
		/*
		 * Defer changing window size until after terminal is
		 * initialized.
		 */
		if (terminit() == 0)
			return;
#endif	/* LINEMODE */

		/*
		 * Change window size as requested by client.
		 */

		ws.ws_col = parm1;
		ws.ws_row = parm2;
		(void) ioctl(pty, TIOCSWINSZ, (char *)&ws);
	    }

		break;

	case TELOPT_TSPEED:
	    {
		def_tspeed = parm1;
		def_rspeed = parm2;
#ifdef	LINEMODE
		/*
		 * Defer changing the terminal speed.
		 */
		if (terminit() == 0)
			return;
#endif	/* LINEMODE */
		/*
		 * Change terminal speed as requested by client.
		 * We set the receive speed first, so that if we can't
		 * store separate receive and transmit speeds, the transmit
		 * speed will take precedence.
		 */
		tty_rspeed(parm2);
		tty_tspeed(parm1);
		set_termbuf();

		break;

	    }  /* end of case TELOPT_TSPEED */

	default:
		/* What? */
		break;
	}  /* end of switch */


	netflush();

}  /* end of clientstat */


#ifdef	LINEMODE
/*
 * defer_terminit
 *
 * Some things should not be done until after the login process has started
 * and all the pty modes are set to what they are supposed to be.  This
 * function is called when the pty state has been processed for the first time.
 * It calls other functions that do things that were deferred in each module.
 */
void
defer_terminit()
{

	/*
	 * local stuff that got deferred.
	 */
	if (def_tspeed != -1) {
		clientstat(TELOPT_TSPEED, def_tspeed, def_rspeed);
		def_tspeed = def_rspeed = 0;
	}

	if (def_col || def_row) {
		struct winsize ws;

		memset((char *)&ws, 0, sizeof(ws));
		ws.ws_col = def_col;
		ws.ws_row = def_row;
		(void) ioctl(pty, TIOCSWINSZ, (char *)&ws);
	}

	/*
	 * The only other module that currently defers anything.
	 */
	deferslc();

}  /* end of defer_terminit */

/*
 * terminit
 *
 * Returns true if the pty state has been processed yet.
 */
int
terminit()
{
	return(_terminit);

}  /* end of terminit */
#endif	/* LINEMODE */