Home | History | Annotate | Line # | Download | only in raidctl
raidctl.c revision 1.39.4.1
      1  1.39.4.1      snj /*      $NetBSD: raidctl.c,v 1.39.4.1 2009/02/01 23:41:37 snj Exp $   */
      2      1.18  thorpej 
      3       1.1    oster /*-
      4       1.1    oster  * Copyright (c) 1996, 1997, 1998 The NetBSD Foundation, Inc.
      5       1.1    oster  * All rights reserved.
      6       1.1    oster  *
      7       1.1    oster  * This code is derived from software contributed to The NetBSD Foundation
      8       1.1    oster  * by Greg Oster
      9       1.1    oster  *
     10       1.1    oster  * Redistribution and use in source and binary forms, with or without
     11       1.1    oster  * modification, are permitted provided that the following conditions
     12       1.1    oster  * are met:
     13       1.1    oster  * 1. Redistributions of source code must retain the above copyright
     14       1.1    oster  *    notice, this list of conditions and the following disclaimer.
     15       1.1    oster  * 2. Redistributions in binary form must reproduce the above copyright
     16       1.1    oster  *    notice, this list of conditions and the following disclaimer in the
     17       1.1    oster  *    documentation and/or other materials provided with the distribution.
     18       1.1    oster  *
     19       1.1    oster  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20       1.1    oster  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21       1.1    oster  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22       1.1    oster  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23       1.1    oster  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24       1.1    oster  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25       1.1    oster  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26       1.1    oster  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27       1.1    oster  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28       1.1    oster  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29       1.1    oster  * POSSIBILITY OF SUCH DAMAGE.
     30       1.1    oster  */
     31       1.1    oster 
     32       1.1    oster /*
     33      1.18  thorpej  * This program is a re-write of the original rf_ctrl program
     34      1.18  thorpej  * distributed by CMU with RAIDframe 1.1.
     35      1.18  thorpej  *
     36      1.18  thorpej  * This program is the user-land interface to the RAIDframe kernel
     37      1.18  thorpej  * driver in NetBSD.
     38       1.1    oster  */
     39      1.33      agc #include <sys/cdefs.h>
     40      1.33      agc 
     41      1.33      agc #ifndef lint
     42  1.39.4.1      snj __RCSID("$NetBSD: raidctl.c,v 1.39.4.1 2009/02/01 23:41:37 snj Exp $");
     43      1.33      agc #endif
     44      1.33      agc 
     45       1.1    oster 
     46       1.1    oster #include <sys/param.h>
     47       1.1    oster #include <sys/ioctl.h>
     48       1.1    oster #include <sys/stat.h>
     49      1.18  thorpej #include <sys/disklabel.h>
     50      1.18  thorpej 
     51       1.1    oster #include <ctype.h>
     52       1.1    oster #include <err.h>
     53       1.2   mjacob #include <errno.h>
     54      1.25    lukem #include <fcntl.h>
     55      1.25    lukem #include <stdio.h>
     56      1.25    lukem #include <stdlib.h>
     57       1.1    oster #include <string.h>
     58       1.3    oster #include <unistd.h>
     59      1.25    lukem #include <util.h>
     60       1.3    oster 
     61      1.29    oster #include <dev/raidframe/raidframevar.h>
     62      1.29    oster #include <dev/raidframe/raidframeio.h>
     63      1.29    oster #include "rf_configure.h"
     64       1.1    oster 
     65      1.36  xtraeme void	do_ioctl(int, u_long, void *, const char *);
     66      1.36  xtraeme static  void rf_configure(int, char*, int);
     67      1.36  xtraeme static  const char *device_status(RF_DiskStatus_t);
     68      1.36  xtraeme static  void rf_get_device_status(int);
     69      1.36  xtraeme static	void rf_output_configuration(int, const char *);
     70      1.36  xtraeme static  void get_component_number(int, char *, int *, int *);
     71      1.36  xtraeme static  void rf_fail_disk(int, char *, int);
     72      1.36  xtraeme static  void usage(void);
     73      1.36  xtraeme static  void get_component_label(int, char *);
     74      1.36  xtraeme static  void set_component_label(int, char *);
     75      1.36  xtraeme static  void init_component_labels(int, int);
     76      1.36  xtraeme static  void set_autoconfig(int, int, char *);
     77      1.36  xtraeme static  void add_hot_spare(int, char *);
     78      1.36  xtraeme static  void remove_hot_spare(int, char *);
     79      1.36  xtraeme static  void rebuild_in_place(int, char *);
     80      1.36  xtraeme static  void check_status(int,int);
     81      1.36  xtraeme static  void check_parity(int,int, char *);
     82      1.36  xtraeme static  void do_meter(int, u_long);
     83      1.36  xtraeme static  void get_bar(char *, double, int);
     84      1.36  xtraeme static  void get_time_string(char *, int);
     85      1.10    oster 
     86      1.18  thorpej int verbose;
     87       1.1    oster 
     88       1.1    oster int
     89      1.36  xtraeme main(int argc,char *argv[])
     90       1.1    oster {
     91       1.1    oster 	int ch;
     92       1.1    oster 	int num_options;
     93       1.1    oster 	unsigned long action;
     94       1.1    oster 	char config_filename[PATH_MAX];
     95       1.1    oster 	char dev_name[PATH_MAX];
     96       1.1    oster 	char name[PATH_MAX];
     97       1.5    oster 	char component[PATH_MAX];
     98      1.12    oster 	char autoconf[10];
     99      1.27    lukem 	int do_output;
    100       1.1    oster 	int do_recon;
    101       1.7    oster 	int do_rewrite;
    102       1.7    oster 	int is_clean;
    103       1.1    oster 	int raidID;
    104       1.5    oster 	int serial_number;
    105       1.1    oster 	struct stat st;
    106       1.1    oster 	int fd;
    107       1.5    oster 	int force;
    108      1.30   simonb 	int openmode;
    109       1.1    oster 
    110       1.1    oster 	num_options = 0;
    111       1.1    oster 	action = 0;
    112      1.27    lukem 	do_output = 0;
    113       1.1    oster 	do_recon = 0;
    114       1.7    oster 	do_rewrite = 0;
    115       1.7    oster 	is_clean = 0;
    116      1.38    lukem 	serial_number = 0;
    117       1.5    oster 	force = 0;
    118      1.30   simonb 	openmode = O_RDWR;	/* default to read/write */
    119       1.1    oster 
    120      1.27    lukem 	while ((ch = getopt(argc, argv, "a:A:Bc:C:f:F:g:GiI:l:r:R:sSpPuv"))
    121      1.12    oster 	       != -1)
    122       1.1    oster 		switch(ch) {
    123       1.5    oster 		case 'a':
    124       1.5    oster 			action = RAIDFRAME_ADD_HOT_SPARE;
    125      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    126       1.5    oster 			num_options++;
    127       1.5    oster 			break;
    128      1.12    oster 		case 'A':
    129      1.12    oster 			action = RAIDFRAME_SET_AUTOCONFIG;
    130      1.32   itojun 			strlcpy(autoconf, optarg, sizeof(autoconf));
    131      1.12    oster 			num_options++;
    132      1.12    oster 			break;
    133       1.6    oster 		case 'B':
    134       1.6    oster 			action = RAIDFRAME_COPYBACK;
    135       1.6    oster 			num_options++;
    136       1.6    oster 			break;
    137       1.1    oster 		case 'c':
    138       1.6    oster 			action = RAIDFRAME_CONFIGURE;
    139      1.32   itojun 			strlcpy(config_filename, optarg,
    140      1.32   itojun 			    sizeof(config_filename));
    141       1.6    oster 			force = 0;
    142       1.1    oster 			num_options++;
    143       1.1    oster 			break;
    144       1.1    oster 		case 'C':
    145      1.32   itojun 			strlcpy(config_filename, optarg,
    146      1.32   itojun 			    sizeof(config_filename));
    147       1.6    oster 			action = RAIDFRAME_CONFIGURE;
    148       1.6    oster 			force = 1;
    149       1.1    oster 			num_options++;
    150       1.1    oster 			break;
    151       1.1    oster 		case 'f':
    152       1.1    oster 			action = RAIDFRAME_FAIL_DISK;
    153      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    154       1.1    oster 			do_recon = 0;
    155       1.1    oster 			num_options++;
    156       1.1    oster 			break;
    157       1.1    oster 		case 'F':
    158       1.1    oster 			action = RAIDFRAME_FAIL_DISK;
    159      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    160       1.1    oster 			do_recon = 1;
    161       1.5    oster 			num_options++;
    162       1.5    oster 			break;
    163       1.5    oster 		case 'g':
    164       1.5    oster 			action = RAIDFRAME_GET_COMPONENT_LABEL;
    165      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    166      1.30   simonb 			openmode = O_RDONLY;
    167       1.5    oster 			num_options++;
    168       1.5    oster 			break;
    169      1.27    lukem 		case 'G':
    170      1.27    lukem 			action = RAIDFRAME_GET_INFO;
    171      1.30   simonb 			openmode = O_RDONLY;
    172      1.27    lukem 			do_output = 1;
    173      1.27    lukem 			num_options++;
    174      1.27    lukem 			break;
    175       1.6    oster 		case 'i':
    176       1.6    oster 			action = RAIDFRAME_REWRITEPARITY;
    177       1.6    oster 			num_options++;
    178       1.6    oster 			break;
    179       1.5    oster 		case 'I':
    180       1.5    oster 			action = RAIDFRAME_INIT_LABELS;
    181       1.5    oster 			serial_number = atoi(optarg);
    182       1.5    oster 			num_options++;
    183       1.5    oster 			break;
    184       1.6    oster 		case 'l':
    185       1.5    oster 			action = RAIDFRAME_SET_COMPONENT_LABEL;
    186      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    187       1.1    oster 			num_options++;
    188       1.1    oster 			break;
    189       1.1    oster 		case 'r':
    190       1.6    oster 			action = RAIDFRAME_REMOVE_HOT_SPARE;
    191      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    192       1.1    oster 			num_options++;
    193       1.1    oster 			break;
    194       1.1    oster 		case 'R':
    195      1.32   itojun 			strlcpy(component, optarg, sizeof(component));
    196       1.6    oster 			action = RAIDFRAME_REBUILD_IN_PLACE;
    197       1.1    oster 			num_options++;
    198       1.1    oster 			break;
    199       1.1    oster 		case 's':
    200       1.1    oster 			action = RAIDFRAME_GET_INFO;
    201      1.30   simonb 			openmode = O_RDONLY;
    202       1.1    oster 			num_options++;
    203       1.1    oster 			break;
    204       1.6    oster 		case 'S':
    205      1.19    oster 			action = RAIDFRAME_CHECK_RECON_STATUS_EXT;
    206      1.30   simonb 			openmode = O_RDONLY;
    207       1.6    oster 			num_options++;
    208       1.6    oster 			break;
    209       1.7    oster 		case 'p':
    210       1.7    oster 			action = RAIDFRAME_CHECK_PARITY;
    211      1.30   simonb 			openmode = O_RDONLY;
    212       1.7    oster 			num_options++;
    213       1.7    oster 			break;
    214       1.7    oster 		case 'P':
    215       1.7    oster 			action = RAIDFRAME_CHECK_PARITY;
    216       1.7    oster 			do_rewrite = 1;
    217       1.7    oster 			num_options++;
    218       1.7    oster 			break;
    219       1.1    oster 		case 'u':
    220       1.1    oster 			action = RAIDFRAME_SHUTDOWN;
    221       1.1    oster 			num_options++;
    222       1.1    oster 			break;
    223      1.10    oster 		case 'v':
    224      1.10    oster 			verbose = 1;
    225      1.10    oster 			/* Don't bump num_options, as '-v' is not
    226      1.10    oster 			   an option like the others */
    227      1.10    oster 			/* num_options++; */
    228      1.10    oster 			break;
    229       1.1    oster 		default:
    230       1.1    oster 			usage();
    231       1.1    oster 		}
    232       1.1    oster 	argc -= optind;
    233       1.1    oster 	argv += optind;
    234       1.1    oster 
    235      1.34     fvdl 	if ((num_options > 1) || (argc == 0))
    236       1.1    oster 		usage();
    237       1.1    oster 
    238      1.32   itojun 	strlcpy(name, argv[0], sizeof(name));
    239      1.35    oster 	fd = opendisk(name, openmode, dev_name, sizeof(dev_name), 0);
    240      1.25    lukem 	if (fd == -1) {
    241      1.25    lukem 		fprintf(stderr, "%s: unable to open device file: %s\n",
    242      1.26      cgd 			getprogname(), name);
    243      1.25    lukem 		exit(1);
    244      1.25    lukem 	}
    245      1.25    lukem 	if (fstat(fd, &st) != 0) {
    246       1.1    oster 		fprintf(stderr,"%s: stat failure on: %s\n",
    247      1.26      cgd 			getprogname(), dev_name);
    248      1.25    lukem 		exit(1);
    249       1.1    oster 	}
    250       1.1    oster 	if (!S_ISBLK(st.st_mode) && !S_ISCHR(st.st_mode)) {
    251       1.1    oster 		fprintf(stderr,"%s: invalid device: %s\n",
    252      1.26      cgd 			getprogname(), dev_name);
    253      1.25    lukem 		exit(1);
    254       1.1    oster 	}
    255       1.1    oster 
    256      1.28    oster 	raidID = DISKUNIT(st.st_rdev);
    257       1.1    oster 
    258       1.1    oster 	switch(action) {
    259       1.5    oster 	case RAIDFRAME_ADD_HOT_SPARE:
    260      1.12    oster 		add_hot_spare(fd, component);
    261       1.5    oster 		break;
    262       1.6    oster 	case RAIDFRAME_REMOVE_HOT_SPARE:
    263      1.12    oster 		remove_hot_spare(fd, component);
    264       1.6    oster 		break;
    265       1.1    oster 	case RAIDFRAME_CONFIGURE:
    266      1.12    oster 		rf_configure(fd, config_filename, force);
    267      1.12    oster 		break;
    268      1.12    oster 	case RAIDFRAME_SET_AUTOCONFIG:
    269      1.12    oster 		set_autoconfig(fd, raidID, autoconf);
    270       1.1    oster 		break;
    271       1.1    oster 	case RAIDFRAME_COPYBACK:
    272       1.1    oster 		printf("Copyback.\n");
    273       1.1    oster 		do_ioctl(fd, RAIDFRAME_COPYBACK, NULL, "RAIDFRAME_COPYBACK");
    274      1.10    oster 		if (verbose) {
    275      1.10    oster 			sleep(3); /* XXX give the copyback a chance to start */
    276      1.10    oster 			printf("Copyback status:\n");
    277      1.19    oster 			do_meter(fd,RAIDFRAME_CHECK_COPYBACK_STATUS_EXT);
    278      1.10    oster 		}
    279       1.1    oster 		break;
    280       1.1    oster 	case RAIDFRAME_FAIL_DISK:
    281      1.12    oster 		rf_fail_disk(fd, component, do_recon);
    282       1.5    oster 		break;
    283       1.5    oster 	case RAIDFRAME_SET_COMPONENT_LABEL:
    284      1.12    oster 		set_component_label(fd, component);
    285       1.5    oster 		break;
    286       1.5    oster 	case RAIDFRAME_GET_COMPONENT_LABEL:
    287      1.12    oster 		get_component_label(fd, component);
    288       1.5    oster 		break;
    289       1.5    oster 	case RAIDFRAME_INIT_LABELS:
    290      1.12    oster 		init_component_labels(fd, serial_number);
    291       1.1    oster 		break;
    292       1.1    oster 	case RAIDFRAME_REWRITEPARITY:
    293       1.1    oster 		printf("Initiating re-write of parity\n");
    294       1.1    oster 		do_ioctl(fd, RAIDFRAME_REWRITEPARITY, NULL,
    295       1.1    oster 			 "RAIDFRAME_REWRITEPARITY");
    296      1.10    oster 		if (verbose) {
    297      1.10    oster 			sleep(3); /* XXX give it time to get started */
    298      1.10    oster 			printf("Parity Re-write status:\n");
    299      1.19    oster 			do_meter(fd, RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT);
    300      1.10    oster 		}
    301       1.1    oster 		break;
    302      1.19    oster 	case RAIDFRAME_CHECK_RECON_STATUS_EXT:
    303      1.14    oster 		check_status(fd,1);
    304       1.1    oster 		break;
    305       1.1    oster 	case RAIDFRAME_GET_INFO:
    306      1.27    lukem 		if (do_output)
    307      1.27    lukem 			rf_output_configuration(fd, dev_name);
    308      1.27    lukem 		else
    309      1.27    lukem 			rf_get_device_status(fd);
    310       1.1    oster 		break;
    311       1.6    oster 	case RAIDFRAME_REBUILD_IN_PLACE:
    312      1.12    oster 		rebuild_in_place(fd, component);
    313       1.6    oster 		break;
    314       1.7    oster 	case RAIDFRAME_CHECK_PARITY:
    315      1.12    oster 		check_parity(fd, do_rewrite, dev_name);
    316       1.7    oster 		break;
    317       1.1    oster 	case RAIDFRAME_SHUTDOWN:
    318       1.1    oster 		do_ioctl(fd, RAIDFRAME_SHUTDOWN, NULL, "RAIDFRAME_SHUTDOWN");
    319       1.1    oster 		break;
    320       1.1    oster 	default:
    321       1.1    oster 		break;
    322       1.1    oster 	}
    323       1.1    oster 
    324       1.1    oster 	close(fd);
    325       1.1    oster 	exit(0);
    326       1.1    oster }
    327       1.1    oster 
    328      1.10    oster void
    329      1.36  xtraeme do_ioctl(int fd, unsigned long command, void *arg, const char *ioctl_name)
    330       1.1    oster {
    331       1.1    oster 	if (ioctl(fd, command, arg) < 0) {
    332       1.1    oster 		warn("ioctl (%s) failed", ioctl_name);
    333       1.1    oster 		exit(1);
    334       1.1    oster 	}
    335       1.1    oster }
    336       1.1    oster 
    337       1.1    oster 
    338       1.1    oster static void
    339      1.36  xtraeme rf_configure(int fd, char *config_file, int force)
    340       1.1    oster {
    341       1.1    oster 	void *generic;
    342       1.1    oster 	RF_Config_t cfg;
    343       1.1    oster 
    344       1.9    oster 	if (rf_MakeConfig( config_file, &cfg ) != 0) {
    345       1.1    oster 		fprintf(stderr,"%s: unable to create RAIDframe %s\n",
    346      1.26      cgd 			getprogname(), "configuration structure\n");
    347       1.1    oster 		exit(1);
    348       1.1    oster 	}
    349       1.1    oster 
    350       1.6    oster 	cfg.force = force;
    351       1.6    oster 
    352       1.1    oster 	/*
    353      1.18  thorpej 	 * Note the extra level of redirection needed here, since
    354      1.18  thorpej 	 * what we really want to pass in is a pointer to the pointer to
    355      1.18  thorpej 	 * the configuration structure.
    356       1.1    oster 	 */
    357       1.1    oster 
    358       1.1    oster 	generic = (void *) &cfg;
    359       1.6    oster 	do_ioctl(fd, RAIDFRAME_CONFIGURE, &generic, "RAIDFRAME_CONFIGURE");
    360       1.1    oster }
    361       1.1    oster 
    362      1.18  thorpej static const char *
    363      1.36  xtraeme device_status(RF_DiskStatus_t status)
    364       1.1    oster {
    365       1.1    oster 
    366       1.1    oster 	switch (status) {
    367       1.1    oster 	case rf_ds_optimal:
    368      1.18  thorpej 		return ("optimal");
    369       1.1    oster 		break;
    370       1.1    oster 	case rf_ds_failed:
    371      1.18  thorpej 		return ("failed");
    372       1.1    oster 		break;
    373       1.1    oster 	case rf_ds_reconstructing:
    374      1.18  thorpej 		return ("reconstructing");
    375       1.1    oster 		break;
    376       1.1    oster 	case rf_ds_dist_spared:
    377      1.18  thorpej 		return ("dist_spared");
    378       1.1    oster 		break;
    379       1.1    oster 	case rf_ds_spared:
    380      1.18  thorpej 		return ("spared");
    381       1.1    oster 		break;
    382       1.1    oster 	case rf_ds_spare:
    383      1.18  thorpej 		return ("spare");
    384       1.1    oster 		break;
    385       1.1    oster 	case rf_ds_used_spare:
    386      1.18  thorpej 		return ("used_spare");
    387       1.1    oster 		break;
    388       1.1    oster 	default:
    389      1.18  thorpej 		return ("UNKNOWN");
    390       1.1    oster 	}
    391      1.18  thorpej 	/* NOTREACHED */
    392       1.1    oster }
    393       1.1    oster 
    394       1.1    oster static void
    395      1.36  xtraeme rf_get_device_status(int fd)
    396       1.1    oster {
    397       1.1    oster 	RF_DeviceConfig_t device_config;
    398       1.1    oster 	void *cfg_ptr;
    399       1.8    oster 	int is_clean;
    400       1.1    oster 	int i;
    401       1.1    oster 
    402       1.1    oster 	cfg_ptr = &device_config;
    403       1.1    oster 
    404       1.1    oster 	do_ioctl(fd, RAIDFRAME_GET_INFO, &cfg_ptr, "RAIDFRAME_GET_INFO");
    405       1.1    oster 
    406       1.1    oster 	printf("Components:\n");
    407       1.1    oster 	for(i=0; i < device_config.ndevs; i++) {
    408       1.1    oster 		printf("%20s: %s\n", device_config.devs[i].devname,
    409       1.1    oster 		       device_status(device_config.devs[i].status));
    410       1.1    oster 	}
    411       1.1    oster 	if (device_config.nspares > 0) {
    412       1.1    oster 		printf("Spares:\n");
    413       1.1    oster 		for(i=0; i < device_config.nspares; i++) {
    414       1.5    oster 			printf("%20s: %s\n",
    415       1.1    oster 			       device_config.spares[i].devname,
    416       1.1    oster 			       device_status(device_config.spares[i].status));
    417       1.1    oster 		}
    418       1.1    oster 	} else {
    419       1.1    oster 		printf("No spares.\n");
    420       1.8    oster 	}
    421      1.14    oster 	for(i=0; i < device_config.ndevs; i++) {
    422      1.14    oster 		if (device_config.devs[i].status == rf_ds_optimal) {
    423      1.14    oster 			get_component_label(fd, device_config.devs[i].devname);
    424      1.14    oster 		} else {
    425      1.14    oster 			printf("%s status is: %s.  Skipping label.\n",
    426      1.14    oster 			       device_config.devs[i].devname,
    427      1.14    oster 			       device_status(device_config.devs[i].status));
    428      1.14    oster 		}
    429      1.14    oster 	}
    430      1.23    oster 
    431      1.21    oster 	if (device_config.nspares > 0) {
    432      1.21    oster 		for(i=0; i < device_config.nspares; i++) {
    433      1.21    oster 			if ((device_config.spares[i].status ==
    434      1.21    oster 			     rf_ds_optimal) ||
    435      1.21    oster 			    (device_config.spares[i].status ==
    436      1.21    oster 			     rf_ds_used_spare)) {
    437      1.21    oster 				get_component_label(fd,
    438      1.21    oster 					    device_config.spares[i].devname);
    439      1.21    oster 			} else {
    440      1.21    oster 				printf("%s status is: %s.  Skipping label.\n",
    441      1.21    oster 				       device_config.spares[i].devname,
    442      1.21    oster 				       device_status(device_config.spares[i].status));
    443      1.21    oster 			}
    444      1.21    oster 		}
    445      1.21    oster 	}
    446      1.23    oster 
    447       1.8    oster 	do_ioctl(fd, RAIDFRAME_CHECK_PARITY, &is_clean,
    448       1.8    oster 		 "RAIDFRAME_CHECK_PARITY");
    449       1.8    oster 	if (is_clean) {
    450       1.8    oster 		printf("Parity status: clean\n");
    451       1.8    oster 	} else {
    452       1.8    oster 		printf("Parity status: DIRTY\n");
    453       1.1    oster 	}
    454      1.14    oster 	check_status(fd,0);
    455       1.1    oster }
    456       1.1    oster 
    457       1.1    oster static void
    458      1.36  xtraeme rf_output_configuration(int fd, const char *name)
    459      1.27    lukem {
    460      1.27    lukem 	RF_DeviceConfig_t device_config;
    461      1.27    lukem 	void *cfg_ptr;
    462      1.27    lukem 	int i;
    463      1.27    lukem 	RF_ComponentLabel_t component_label;
    464      1.27    lukem 	void *label_ptr;
    465      1.27    lukem 	int component_num;
    466      1.27    lukem 	int num_cols;
    467      1.27    lukem 
    468      1.27    lukem 	cfg_ptr = &device_config;
    469      1.27    lukem 
    470      1.27    lukem 	printf("# raidctl config file for %s\n", name);
    471      1.27    lukem 	printf("\n");
    472      1.27    lukem 	do_ioctl(fd, RAIDFRAME_GET_INFO, &cfg_ptr, "RAIDFRAME_GET_INFO");
    473      1.27    lukem 
    474      1.27    lukem 	printf("START array\n");
    475      1.27    lukem 	printf("# numRow numCol numSpare\n");
    476      1.27    lukem 	printf("%d %d %d\n", device_config.rows, device_config.cols,
    477      1.27    lukem 	    device_config.nspares);
    478      1.27    lukem 	printf("\n");
    479      1.27    lukem 
    480      1.27    lukem 	printf("START disks\n");
    481      1.27    lukem 	for(i=0; i < device_config.ndevs; i++)
    482      1.27    lukem 		printf("%s\n", device_config.devs[i].devname);
    483      1.27    lukem 	printf("\n");
    484      1.27    lukem 
    485      1.27    lukem 	if (device_config.nspares > 0) {
    486      1.27    lukem 		printf("START spare\n");
    487      1.27    lukem 		for(i=0; i < device_config.nspares; i++)
    488      1.27    lukem 			printf("%s\n", device_config.spares[i].devname);
    489      1.27    lukem 		printf("\n");
    490      1.27    lukem 	}
    491      1.27    lukem 
    492      1.27    lukem 	for(i=0; i < device_config.ndevs; i++) {
    493      1.27    lukem 		if (device_config.devs[i].status == rf_ds_optimal)
    494      1.27    lukem 			break;
    495      1.27    lukem 	}
    496      1.27    lukem 	if (i == device_config.ndevs) {
    497      1.27    lukem 		printf("# WARNING: no optimal components; using %s\n",
    498      1.27    lukem 		    device_config.devs[0].devname);
    499      1.27    lukem 		i = 0;
    500      1.27    lukem 	}
    501      1.27    lukem 	get_component_number(fd, device_config.devs[i].devname,
    502      1.27    lukem 	    &component_num, &num_cols);
    503      1.27    lukem 	memset(&component_label, 0, sizeof(RF_ComponentLabel_t));
    504      1.27    lukem 	component_label.row = component_num / num_cols;
    505      1.27    lukem 	component_label.column = component_num % num_cols;
    506      1.27    lukem 	label_ptr = &component_label;
    507      1.27    lukem 	do_ioctl(fd, RAIDFRAME_GET_COMPONENT_LABEL, &label_ptr,
    508      1.27    lukem 		  "RAIDFRAME_GET_COMPONENT_LABEL");
    509      1.27    lukem 
    510      1.27    lukem 	printf("START layout\n");
    511      1.27    lukem 	printf(
    512      1.27    lukem 	    "# sectPerSU SUsPerParityUnit SUsPerReconUnit RAID_level_%c\n",
    513      1.27    lukem 	    (char) component_label.parityConfig);
    514      1.27    lukem 	printf("%d %d %d %c\n",
    515      1.27    lukem 	    component_label.sectPerSU, component_label.SUsPerPU,
    516      1.27    lukem 	    component_label.SUsPerRU, (char) component_label.parityConfig);
    517      1.27    lukem 	printf("\n");
    518      1.27    lukem 
    519      1.27    lukem 	printf("START queue\n");
    520      1.27    lukem 	printf("fifo %d\n", device_config.maxqdepth);
    521      1.27    lukem }
    522      1.27    lukem 
    523      1.27    lukem static void
    524      1.36  xtraeme get_component_number(int fd, char *component_name, int *component_number,
    525      1.36  xtraeme 		     int *num_columns)
    526       1.1    oster {
    527       1.1    oster 	RF_DeviceConfig_t device_config;
    528       1.1    oster 	void *cfg_ptr;
    529       1.1    oster 	int i;
    530       1.1    oster 	int found;
    531       1.1    oster 
    532       1.6    oster 	*component_number = -1;
    533       1.1    oster 
    534       1.1    oster 	/* Assuming a full path spec... */
    535       1.1    oster 	cfg_ptr = &device_config;
    536       1.1    oster 	do_ioctl(fd, RAIDFRAME_GET_INFO, &cfg_ptr,
    537       1.1    oster 		 "RAIDFRAME_GET_INFO");
    538       1.6    oster 
    539       1.6    oster 	*num_columns = device_config.cols;
    540       1.6    oster 
    541       1.1    oster 	found = 0;
    542       1.1    oster 	for(i=0; i < device_config.ndevs; i++) {
    543       1.6    oster 		if (strncmp(component_name, device_config.devs[i].devname,
    544       1.1    oster 			    PATH_MAX)==0) {
    545       1.1    oster 			found = 1;
    546       1.6    oster 			*component_number = i;
    547       1.1    oster 		}
    548       1.1    oster 	}
    549      1.21    oster 	if (!found) { /* maybe it's a spare? */
    550      1.21    oster 		for(i=0; i < device_config.nspares; i++) {
    551      1.21    oster 			if (strncmp(component_name,
    552      1.21    oster 				    device_config.spares[i].devname,
    553      1.21    oster 				    PATH_MAX)==0) {
    554      1.21    oster 				found = 1;
    555      1.21    oster 				*component_number = i + device_config.ndevs;
    556      1.23    oster 				/* the way spares are done should
    557      1.23    oster 				   really change... */
    558      1.23    oster 				*num_columns = device_config.cols +
    559      1.23    oster 					device_config.nspares;
    560      1.21    oster 			}
    561      1.21    oster 		}
    562      1.21    oster 	}
    563      1.21    oster 
    564       1.1    oster 	if (!found) {
    565      1.26      cgd 		fprintf(stderr,"%s: %s is not a component %s", getprogname(),
    566       1.6    oster 			component_name, "of this device\n");
    567       1.1    oster 		exit(1);
    568       1.1    oster 	}
    569       1.6    oster }
    570       1.6    oster 
    571       1.6    oster static void
    572      1.36  xtraeme rf_fail_disk(int fd, char *component_to_fail, int do_recon)
    573       1.6    oster {
    574       1.6    oster 	struct rf_recon_req recon_request;
    575       1.6    oster 	int component_num;
    576       1.6    oster 	int num_cols;
    577       1.6    oster 
    578       1.6    oster 	get_component_number(fd, component_to_fail, &component_num, &num_cols);
    579       1.1    oster 
    580       1.6    oster 	recon_request.row = component_num / num_cols;
    581       1.6    oster 	recon_request.col = component_num % num_cols;
    582       1.1    oster 	if (do_recon) {
    583       1.1    oster 		recon_request.flags = RF_FDFLAGS_RECON;
    584       1.1    oster 	} else {
    585       1.1    oster 		recon_request.flags = RF_FDFLAGS_NONE;
    586       1.1    oster 	}
    587       1.1    oster 	do_ioctl(fd, RAIDFRAME_FAIL_DISK, &recon_request,
    588       1.1    oster 		 "RAIDFRAME_FAIL_DISK");
    589      1.10    oster 	if (do_recon && verbose) {
    590      1.10    oster 		printf("Reconstruction status:\n");
    591      1.10    oster 		sleep(3); /* XXX give reconstruction a chance to start */
    592      1.19    oster 		do_meter(fd,RAIDFRAME_CHECK_RECON_STATUS_EXT);
    593      1.10    oster 	}
    594       1.1    oster }
    595       1.1    oster 
    596       1.1    oster static void
    597      1.36  xtraeme get_component_label(int fd, char *component)
    598       1.5    oster {
    599       1.5    oster 	RF_ComponentLabel_t component_label;
    600       1.5    oster 	void *label_ptr;
    601       1.5    oster 	int component_num;
    602       1.6    oster 	int num_cols;
    603       1.5    oster 
    604       1.6    oster 	get_component_number(fd, component, &component_num, &num_cols);
    605       1.5    oster 
    606       1.5    oster 	memset( &component_label, 0, sizeof(RF_ComponentLabel_t));
    607       1.6    oster 	component_label.row = component_num / num_cols;
    608       1.6    oster 	component_label.column = component_num % num_cols;
    609       1.5    oster 
    610       1.5    oster 	label_ptr = &component_label;
    611       1.5    oster 	do_ioctl( fd, RAIDFRAME_GET_COMPONENT_LABEL, &label_ptr,
    612       1.5    oster 		  "RAIDFRAME_GET_COMPONENT_LABEL");
    613       1.5    oster 
    614       1.5    oster 	printf("Component label for %s:\n",component);
    615      1.12    oster 
    616      1.25    lukem 	printf("   Row: %d, Column: %d, Num Rows: %d, Num Columns: %d\n",
    617      1.12    oster 	       component_label.row, component_label.column,
    618      1.12    oster 	       component_label.num_rows, component_label.num_columns);
    619      1.25    lukem 	printf("   Version: %d, Serial Number: %d, Mod Counter: %d\n",
    620      1.12    oster 	       component_label.version, component_label.serial_number,
    621      1.12    oster 	       component_label.mod_counter);
    622      1.25    lukem 	printf("   Clean: %s, Status: %d\n",
    623      1.12    oster 	       component_label.clean ? "Yes" : "No",
    624      1.12    oster 	       component_label.status );
    625      1.25    lukem 	printf("   sectPerSU: %d, SUsPerPU: %d, SUsPerRU: %d\n",
    626      1.12    oster 	       component_label.sectPerSU, component_label.SUsPerPU,
    627      1.12    oster 	       component_label.SUsPerRU);
    628  1.39.4.1      snj 	printf("   Queue size: %d, blocksize: %d, numBlocks: %u\n",
    629      1.25    lukem 	       component_label.maxOutstanding, component_label.blockSize,
    630      1.25    lukem 	       component_label.numBlocks);
    631      1.25    lukem 	printf("   RAID Level: %c\n", (char) component_label.parityConfig);
    632      1.12    oster 	printf("   Autoconfig: %s\n",
    633      1.12    oster 	       component_label.autoconfigure ? "Yes" : "No" );
    634      1.15    oster 	printf("   Root partition: %s\n",
    635      1.15    oster 	       component_label.root_partition ? "Yes" : "No" );
    636      1.12    oster 	printf("   Last configured as: raid%d\n", component_label.last_unit );
    637       1.5    oster }
    638       1.5    oster 
    639       1.5    oster static void
    640      1.36  xtraeme set_component_label(int fd, char *component)
    641       1.5    oster {
    642       1.5    oster 	RF_ComponentLabel_t component_label;
    643       1.5    oster 	int component_num;
    644       1.6    oster 	int num_cols;
    645       1.5    oster 
    646       1.6    oster 	get_component_number(fd, component, &component_num, &num_cols);
    647       1.6    oster 
    648       1.6    oster 	/* XXX This is currently here for testing, and future expandability */
    649       1.5    oster 
    650       1.5    oster 	component_label.version = 1;
    651       1.5    oster 	component_label.serial_number = 123456;
    652       1.5    oster 	component_label.mod_counter = 0;
    653       1.6    oster 	component_label.row = component_num / num_cols;
    654       1.6    oster 	component_label.column = component_num % num_cols;
    655       1.5    oster 	component_label.num_rows = 0;
    656       1.5    oster 	component_label.num_columns = 5;
    657       1.5    oster 	component_label.clean = 0;
    658       1.5    oster 	component_label.status = 1;
    659       1.5    oster 
    660       1.5    oster 	do_ioctl( fd, RAIDFRAME_SET_COMPONENT_LABEL, &component_label,
    661       1.5    oster 		  "RAIDFRAME_SET_COMPONENT_LABEL");
    662       1.5    oster }
    663       1.5    oster 
    664       1.5    oster 
    665       1.5    oster static void
    666      1.36  xtraeme init_component_labels(int fd, int serial_number)
    667       1.5    oster {
    668       1.5    oster 	RF_ComponentLabel_t component_label;
    669       1.5    oster 
    670       1.5    oster 	component_label.version = 0;
    671       1.5    oster 	component_label.serial_number = serial_number;
    672       1.5    oster 	component_label.mod_counter = 0;
    673       1.5    oster 	component_label.row = 0;
    674       1.5    oster 	component_label.column = 0;
    675       1.5    oster 	component_label.num_rows = 0;
    676       1.5    oster 	component_label.num_columns = 0;
    677       1.5    oster 	component_label.clean = 0;
    678       1.5    oster 	component_label.status = 0;
    679       1.5    oster 
    680       1.5    oster 	do_ioctl( fd, RAIDFRAME_INIT_LABELS, &component_label,
    681       1.5    oster 		  "RAIDFRAME_SET_COMPONENT_LABEL");
    682      1.12    oster }
    683      1.12    oster 
    684      1.12    oster static void
    685      1.36  xtraeme set_autoconfig(int fd, int raidID, char *autoconf)
    686      1.12    oster {
    687      1.12    oster 	int auto_config;
    688      1.12    oster 	int root_config;
    689      1.12    oster 
    690      1.12    oster 	auto_config = 0;
    691      1.12    oster 	root_config = 0;
    692      1.12    oster 
    693      1.12    oster 	if (strncasecmp(autoconf,"root", 4) == 0) {
    694      1.12    oster 		root_config = 1;
    695      1.12    oster 	}
    696      1.12    oster 
    697      1.12    oster 	if ((strncasecmp(autoconf,"yes", 3) == 0) ||
    698      1.12    oster 	    root_config == 1) {
    699      1.12    oster 		auto_config = 1;
    700      1.12    oster 	}
    701      1.12    oster 
    702      1.12    oster 	do_ioctl(fd, RAIDFRAME_SET_AUTOCONFIG, &auto_config,
    703      1.12    oster 		 "RAIDFRAME_SET_AUTOCONFIG");
    704      1.12    oster 
    705      1.12    oster 	do_ioctl(fd, RAIDFRAME_SET_ROOT, &root_config,
    706      1.12    oster 		 "RAIDFRAME_SET_ROOT");
    707      1.12    oster 
    708      1.12    oster 	printf("raid%d: Autoconfigure: %s\n", raidID,
    709      1.12    oster 	       auto_config ? "Yes" : "No");
    710      1.12    oster 
    711      1.12    oster 	if (root_config == 1) {
    712      1.12    oster 		printf("raid%d: Root: %s\n", raidID,
    713      1.12    oster 		       auto_config ? "Yes" : "No");
    714      1.12    oster 	}
    715       1.5    oster }
    716       1.5    oster 
    717       1.5    oster static void
    718      1.36  xtraeme add_hot_spare(int fd, char *component)
    719       1.5    oster {
    720       1.6    oster 	RF_SingleComponent_t hot_spare;
    721       1.5    oster 
    722       1.6    oster 	hot_spare.row = 0;
    723       1.6    oster 	hot_spare.column = 0;
    724       1.6    oster 	strncpy(hot_spare.component_name, component,
    725       1.6    oster 		sizeof(hot_spare.component_name));
    726       1.5    oster 
    727       1.5    oster 	do_ioctl( fd, RAIDFRAME_ADD_HOT_SPARE, &hot_spare,
    728       1.5    oster 		  "RAIDFRAME_ADD_HOT_SPARE");
    729       1.6    oster }
    730       1.6    oster 
    731       1.6    oster static void
    732      1.36  xtraeme remove_hot_spare(int fd, char *component)
    733       1.6    oster {
    734       1.6    oster 	RF_SingleComponent_t hot_spare;
    735       1.6    oster 	int component_num;
    736       1.6    oster 	int num_cols;
    737       1.5    oster 
    738       1.6    oster 	get_component_number(fd, component, &component_num, &num_cols);
    739       1.6    oster 
    740       1.6    oster 	hot_spare.row = component_num / num_cols;
    741       1.6    oster 	hot_spare.column = component_num % num_cols;
    742       1.6    oster 
    743       1.6    oster 	strncpy(hot_spare.component_name, component,
    744       1.6    oster 		sizeof(hot_spare.component_name));
    745       1.6    oster 
    746       1.6    oster 	do_ioctl( fd, RAIDFRAME_REMOVE_HOT_SPARE, &hot_spare,
    747       1.6    oster 		  "RAIDFRAME_REMOVE_HOT_SPARE");
    748       1.6    oster }
    749       1.6    oster 
    750       1.6    oster static void
    751      1.36  xtraeme rebuild_in_place(int fd, char *component)
    752       1.6    oster {
    753       1.6    oster 	RF_SingleComponent_t comp;
    754       1.6    oster 	int component_num;
    755       1.6    oster 	int num_cols;
    756       1.6    oster 
    757       1.6    oster 	get_component_number(fd, component, &component_num, &num_cols);
    758       1.6    oster 
    759       1.6    oster 	comp.row = 0;
    760       1.6    oster 	comp.column = component_num;
    761       1.6    oster 	strncpy(comp.component_name, component, sizeof(comp.component_name));
    762       1.6    oster 
    763       1.6    oster 	do_ioctl( fd, RAIDFRAME_REBUILD_IN_PLACE, &comp,
    764       1.6    oster 		  "RAIDFRAME_REBUILD_IN_PLACE");
    765      1.10    oster 
    766      1.10    oster 	if (verbose) {
    767      1.10    oster 		printf("Reconstruction status:\n");
    768      1.10    oster 		sleep(3); /* XXX give reconstruction a chance to start */
    769      1.19    oster 		do_meter(fd,RAIDFRAME_CHECK_RECON_STATUS_EXT);
    770      1.10    oster 	}
    771      1.10    oster 
    772      1.10    oster }
    773      1.10    oster 
    774      1.10    oster static void
    775      1.36  xtraeme check_parity(int fd, int do_rewrite, char *dev_name)
    776      1.10    oster {
    777      1.10    oster 	int is_clean;
    778      1.10    oster 	int percent_done;
    779      1.10    oster 
    780      1.10    oster 	is_clean = 0;
    781      1.10    oster 	percent_done = 0;
    782      1.10    oster 	do_ioctl(fd, RAIDFRAME_CHECK_PARITY, &is_clean,
    783      1.10    oster 		 "RAIDFRAME_CHECK_PARITY");
    784      1.10    oster 	if (is_clean) {
    785      1.10    oster 		printf("%s: Parity status: clean\n",dev_name);
    786      1.10    oster 	} else {
    787      1.10    oster 		printf("%s: Parity status: DIRTY\n",dev_name);
    788      1.10    oster 		if (do_rewrite) {
    789      1.10    oster 			printf("%s: Initiating re-write of parity\n",
    790      1.10    oster 			       dev_name);
    791      1.10    oster 			do_ioctl(fd, RAIDFRAME_REWRITEPARITY, NULL,
    792      1.10    oster 				 "RAIDFRAME_REWRITEPARITY");
    793      1.10    oster 			sleep(3); /* XXX give it time to
    794      1.10    oster 				     get started. */
    795      1.10    oster 			if (verbose) {
    796      1.10    oster 				printf("Parity Re-write status:\n");
    797      1.19    oster 				do_meter(fd, RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT);
    798      1.10    oster 			} else {
    799      1.10    oster 				do_ioctl(fd,
    800      1.10    oster 					 RAIDFRAME_CHECK_PARITYREWRITE_STATUS,
    801      1.10    oster 					 &percent_done,
    802      1.10    oster 					 "RAIDFRAME_CHECK_PARITYREWRITE_STATUS"
    803      1.10    oster 					 );
    804      1.10    oster 				while( percent_done < 100 ) {
    805      1.24    oster 					sleep(3); /* wait a bit... */
    806      1.10    oster 					do_ioctl(fd, RAIDFRAME_CHECK_PARITYREWRITE_STATUS,
    807      1.10    oster 						 &percent_done, "RAIDFRAME_CHECK_PARITYREWRITE_STATUS");
    808      1.10    oster 				}
    809      1.10    oster 
    810      1.10    oster 			}
    811      1.10    oster 			       printf("%s: Parity Re-write complete\n",
    812      1.10    oster 				      dev_name);
    813      1.10    oster 		} else {
    814      1.10    oster 			/* parity is wrong, and is not being fixed.
    815      1.10    oster 			   Exit w/ an error. */
    816      1.10    oster 			exit(1);
    817      1.10    oster 		}
    818      1.10    oster 	}
    819      1.10    oster }
    820      1.10    oster 
    821      1.10    oster 
    822      1.10    oster static void
    823      1.36  xtraeme check_status(int fd, int meter)
    824      1.10    oster {
    825      1.10    oster 	int recon_percent_done = 0;
    826      1.10    oster 	int parity_percent_done = 0;
    827      1.10    oster 	int copyback_percent_done = 0;
    828      1.10    oster 
    829      1.10    oster 	do_ioctl(fd, RAIDFRAME_CHECK_RECON_STATUS, &recon_percent_done,
    830      1.10    oster 		 "RAIDFRAME_CHECK_RECON_STATUS");
    831      1.10    oster 	printf("Reconstruction is %d%% complete.\n", recon_percent_done);
    832      1.10    oster 	do_ioctl(fd, RAIDFRAME_CHECK_PARITYREWRITE_STATUS,
    833      1.10    oster 		 &parity_percent_done,
    834      1.10    oster 		 "RAIDFRAME_CHECK_PARITYREWRITE_STATUS");
    835      1.10    oster 	printf("Parity Re-write is %d%% complete.\n", parity_percent_done);
    836      1.10    oster 	do_ioctl(fd, RAIDFRAME_CHECK_COPYBACK_STATUS, &copyback_percent_done,
    837      1.10    oster 		 "RAIDFRAME_CHECK_COPYBACK_STATUS");
    838      1.10    oster 	printf("Copyback is %d%% complete.\n", copyback_percent_done);
    839      1.10    oster 
    840      1.14    oster 	if (meter) {
    841      1.14    oster 		/* These 3 should be mutually exclusive at this point */
    842      1.14    oster 		if (recon_percent_done < 100) {
    843      1.14    oster 			printf("Reconstruction status:\n");
    844      1.19    oster 			do_meter(fd,RAIDFRAME_CHECK_RECON_STATUS_EXT);
    845      1.14    oster 		} else if (parity_percent_done < 100) {
    846      1.14    oster 			printf("Parity Re-write status:\n");
    847      1.19    oster 			do_meter(fd,RAIDFRAME_CHECK_PARITYREWRITE_STATUS_EXT);
    848      1.14    oster 		} else if (copyback_percent_done < 100) {
    849      1.14    oster 			printf("Copyback status:\n");
    850      1.19    oster 			do_meter(fd,RAIDFRAME_CHECK_COPYBACK_STATUS_EXT);
    851      1.14    oster 		}
    852      1.10    oster 	}
    853      1.10    oster }
    854      1.10    oster 
    855      1.18  thorpej const char *tbits = "|/-\\";
    856      1.10    oster 
    857      1.10    oster static void
    858      1.36  xtraeme do_meter(int fd, u_long option)
    859      1.10    oster {
    860      1.10    oster 	int percent_done;
    861      1.37    oster 	RF_uint64 start_value;
    862      1.19    oster 	RF_ProgressInfo_t progressInfo;
    863      1.19    oster 	void *pInfoPtr;
    864      1.10    oster 	struct timeval start_time;
    865      1.10    oster 	struct timeval current_time;
    866      1.10    oster 	double elapsed;
    867      1.10    oster 	int elapsed_sec;
    868      1.10    oster 	int elapsed_usec;
    869      1.20    oster 	int simple_eta,last_eta;
    870      1.10    oster 	double rate;
    871      1.37    oster 	RF_uint64 amount;
    872      1.10    oster 	int tbit_value;
    873      1.10    oster 	char buffer[1024];
    874      1.10    oster 	char bar_buffer[1024];
    875      1.10    oster 	char eta_buffer[1024];
    876      1.10    oster 
    877      1.10    oster 	if (gettimeofday(&start_time,NULL)) {
    878      1.26      cgd 		fprintf(stderr,"%s: gettimeofday failed!?!?\n", getprogname());
    879      1.10    oster 		exit(errno);
    880      1.10    oster 	}
    881      1.19    oster 	memset(&progressInfo, 0, sizeof(RF_ProgressInfo_t));
    882      1.19    oster 	pInfoPtr=&progressInfo;
    883      1.19    oster 
    884      1.10    oster 	percent_done = 0;
    885      1.19    oster 	do_ioctl(fd, option, &pInfoPtr, "");
    886      1.37    oster 	start_value = progressInfo.completed;
    887      1.10    oster 	current_time = start_time;
    888      1.38    lukem 	simple_eta = 0;
    889      1.38    lukem 	last_eta = 0;
    890      1.10    oster 
    891      1.10    oster 	tbit_value = 0;
    892      1.19    oster 	while(progressInfo.completed < progressInfo.total) {
    893      1.10    oster 
    894      1.19    oster 		percent_done = (progressInfo.completed * 100) /
    895      1.19    oster 			progressInfo.total;
    896      1.10    oster 
    897      1.10    oster 		get_bar(bar_buffer, percent_done, 40);
    898      1.10    oster 
    899      1.20    oster 		elapsed_sec = current_time.tv_sec - start_time.tv_sec;
    900      1.20    oster 		elapsed_usec = current_time.tv_usec - start_time.tv_usec;
    901      1.10    oster 		if (elapsed_usec < 0) {
    902      1.10    oster 			elapsed_usec-=1000000;
    903      1.10    oster 			elapsed_sec++;
    904      1.10    oster 		}
    905      1.20    oster 
    906      1.10    oster 		elapsed = (double) elapsed_sec +
    907      1.10    oster 			(double) elapsed_usec / 1000000.0;
    908      1.19    oster 
    909      1.20    oster 		amount = progressInfo.completed - start_value;
    910      1.19    oster 
    911      1.10    oster 		if (amount <= 0) { /* we don't do negatives (yet?) */
    912      1.10    oster 			amount = 0;
    913      1.10    oster 		}
    914      1.20    oster 
    915      1.22    oster 		if (elapsed == 0)
    916      1.22    oster 			rate = 0.0;
    917      1.22    oster 		else
    918      1.22    oster 			rate = amount / elapsed;
    919      1.10    oster 
    920      1.10    oster 		if (rate > 0.0) {
    921      1.19    oster 			simple_eta = (int) (((double)progressInfo.total -
    922      1.20    oster 					     (double) progressInfo.completed)
    923      1.19    oster 					    / rate);
    924      1.10    oster 		} else {
    925      1.10    oster 			simple_eta = -1;
    926      1.10    oster 		}
    927      1.19    oster 
    928      1.10    oster 		if (simple_eta <=0) {
    929      1.10    oster 			simple_eta = last_eta;
    930      1.10    oster 		} else {
    931      1.10    oster 			last_eta = simple_eta;
    932      1.10    oster 		}
    933      1.10    oster 
    934      1.20    oster 		get_time_string(eta_buffer, simple_eta);
    935      1.10    oster 
    936      1.10    oster 		snprintf(buffer,1024,"\r%3d%% |%s| ETA: %s %c",
    937      1.10    oster 			 percent_done,bar_buffer,eta_buffer,tbits[tbit_value]);
    938      1.10    oster 
    939      1.10    oster 		write(fileno(stdout),buffer,strlen(buffer));
    940      1.10    oster 		fflush(stdout);
    941      1.10    oster 
    942      1.10    oster 		if (++tbit_value>3)
    943      1.10    oster 			tbit_value = 0;
    944      1.10    oster 
    945      1.10    oster 		sleep(2);
    946      1.10    oster 
    947      1.10    oster 		if (gettimeofday(&current_time,NULL)) {
    948      1.10    oster 			fprintf(stderr,"%s: gettimeofday failed!?!?\n",
    949      1.26      cgd 				getprogname());
    950      1.10    oster 			exit(errno);
    951      1.10    oster 		}
    952      1.10    oster 
    953      1.19    oster 		do_ioctl( fd, option, &pInfoPtr, "");
    954      1.10    oster 
    955      1.10    oster 
    956      1.10    oster 	}
    957      1.10    oster 	printf("\n");
    958      1.10    oster }
    959      1.10    oster /* 40 '*''s per line, then 40 ' ''s line. */
    960      1.10    oster /* If you've got a screen wider than 160 characters, "tough" */
    961      1.10    oster 
    962      1.10    oster #define STAR_MIDPOINT 4*40
    963      1.10    oster const char stars[] = "****************************************"
    964      1.10    oster                      "****************************************"
    965      1.10    oster                      "****************************************"
    966      1.10    oster                      "****************************************"
    967      1.10    oster                      "                                        "
    968      1.10    oster                      "                                        "
    969      1.10    oster                      "                                        "
    970      1.10    oster                      "                                        "
    971      1.10    oster                      "                                        ";
    972      1.10    oster 
    973      1.10    oster static void
    974      1.36  xtraeme get_bar(char *string, double percent, int max_strlen)
    975      1.10    oster {
    976      1.10    oster 	int offset;
    977      1.10    oster 
    978      1.10    oster 	if (max_strlen > STAR_MIDPOINT) {
    979      1.10    oster 		max_strlen = STAR_MIDPOINT;
    980      1.10    oster 	}
    981      1.10    oster 	offset = STAR_MIDPOINT -
    982      1.10    oster 		(int)((percent * max_strlen)/ 100);
    983      1.10    oster 	if (offset < 0)
    984      1.10    oster 		offset = 0;
    985      1.10    oster 	snprintf(string,max_strlen,"%s",&stars[offset]);
    986      1.10    oster }
    987      1.10    oster 
    988      1.10    oster static void
    989      1.36  xtraeme get_time_string(char *string, int simple_time)
    990      1.10    oster {
    991      1.10    oster 	int minutes, seconds, hours;
    992      1.10    oster 	char hours_buffer[5];
    993      1.10    oster 	char minutes_buffer[5];
    994      1.10    oster 	char seconds_buffer[5];
    995      1.10    oster 
    996      1.10    oster 	if (simple_time >= 0) {
    997      1.10    oster 
    998      1.10    oster 		minutes = (int) simple_time / 60;
    999      1.10    oster 		seconds = ((int)simple_time - 60*minutes);
   1000      1.10    oster 		hours = minutes / 60;
   1001      1.10    oster 		minutes = minutes - 60*hours;
   1002      1.10    oster 
   1003      1.10    oster 		if (hours > 0) {
   1004      1.10    oster 			snprintf(hours_buffer,5,"%02d:",hours);
   1005      1.10    oster 		} else {
   1006      1.10    oster 			snprintf(hours_buffer,5,"   ");
   1007      1.10    oster 		}
   1008      1.10    oster 
   1009      1.10    oster 		snprintf(minutes_buffer,5,"%02d:",minutes);
   1010      1.10    oster 		snprintf(seconds_buffer,5,"%02d",seconds);
   1011      1.10    oster 		snprintf(string,1024,"%s%s%s",
   1012      1.10    oster 			 hours_buffer, minutes_buffer, seconds_buffer);
   1013      1.10    oster 	} else {
   1014      1.10    oster 		snprintf(string,1024,"   --:--");
   1015      1.10    oster 	}
   1016      1.10    oster 
   1017       1.5    oster }
   1018       1.5    oster 
   1019       1.5    oster static void
   1020      1.36  xtraeme usage(void)
   1021       1.1    oster {
   1022      1.26      cgd 	const char *progname = getprogname();
   1023      1.26      cgd 
   1024      1.26      cgd 	fprintf(stderr, "usage: %s [-v] -a component dev\n", progname);
   1025      1.26      cgd 	fprintf(stderr, "       %s [-v] -A yes | no | root dev\n", progname);
   1026      1.26      cgd 	fprintf(stderr, "       %s [-v] -B dev\n", progname);
   1027      1.26      cgd 	fprintf(stderr, "       %s [-v] -c config_file dev\n", progname);
   1028      1.26      cgd 	fprintf(stderr, "       %s [-v] -C config_file dev\n", progname);
   1029      1.26      cgd 	fprintf(stderr, "       %s [-v] -f component dev\n", progname);
   1030      1.26      cgd 	fprintf(stderr, "       %s [-v] -F component dev\n", progname);
   1031      1.26      cgd 	fprintf(stderr, "       %s [-v] -g component dev\n", progname);
   1032      1.27    lukem 	fprintf(stderr, "       %s [-v] -G dev\n", progname);
   1033      1.26      cgd 	fprintf(stderr, "       %s [-v] -i dev\n", progname);
   1034      1.26      cgd 	fprintf(stderr, "       %s [-v] -I serial_number dev\n", progname);
   1035      1.31    oster 	fprintf(stderr, "       %s [-v] -p dev\n", progname);
   1036      1.31    oster 	fprintf(stderr, "       %s [-v] -P dev\n", progname);
   1037      1.26      cgd 	fprintf(stderr, "       %s [-v] -r component dev\n", progname);
   1038      1.26      cgd 	fprintf(stderr, "       %s [-v] -R component dev\n", progname);
   1039      1.26      cgd 	fprintf(stderr, "       %s [-v] -s dev\n", progname);
   1040      1.26      cgd 	fprintf(stderr, "       %s [-v] -S dev\n", progname);
   1041      1.26      cgd 	fprintf(stderr, "       %s [-v] -u dev\n", progname);
   1042       1.1    oster 	exit(1);
   1043       1.1    oster 	/* NOTREACHED */
   1044       1.1    oster }
   1045