xref: /src/sys/arch/acorn32/conf/EB7500ATX

#	$NetBSD: EB7500ATX,v 1.66.2.2 2020/04/08 14:07:24 martin Exp $
#
#	EB7500ATX --- NetBSD/acorn32 complete configuration
#
# This machine description file is used to generate the default NetBSD
# kernel. This generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include 	"arch/acorn32/conf/std.acorn32"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident		"EB7500ATX-$Revision: 1.66.2.2 $"

# estimated number of users
maxusers	32

# Standard system options

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
#options 	NTP		# NTP phase/frequency locked loop

# CPU options
options 	CPU_ARM7	# Support the ARM7 core

options		EB7500ATX	# Define in case needed

# File systems

file-system	FFS		# UFS
#file-system	LFS		# log-structured file system
file-system	MFS		# memory file system
file-system	NFS		# Network file system
file-system 	ADOSFS		# AmigaDOS-compatible file system
file-system 	EXT2FS		# second extended file system (linux)
file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS file system
file-system	FDESC		# /dev/fd
file-system	FILECORE	# Acorn filecore file system
file-system	KERNFS		# /kern
file-system	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay filesystem
file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
file-system	PROCFS		# /proc
file-system	UMAPFS		# NULLFS + uid and gid remapping
file-system	UNION		# union file system
file-system	PTYFS		# /dev/pts/N support

# File system options
options 	QUOTA		# legacy UFS quotas
options 	QUOTA2		# new, in-filesystem UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
options 	WAPBL		# File system journaling support
options 	NFSSERVER
#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support

# Networking options

options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	PIM		# Protocol Independent Multicast
options 	NETATALK	# AppleTalk networking
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing

# Compatibility options

include 	"conf/compat_netbsd12.config"

# Shared memory options

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing

# Device options

options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
#options 	MEMORY_DISK_ROOT_SIZE=4100	# Size in blocks
#options 	MEMORY_DISK_IS_ROOT	# use memory disk as root

# Miscellaneous kernel options
options 	KTRACE		# system call tracing, a la ktrace(1)
options 	IRQSTATS	# manage IRQ statistics
#options 	SCSIVERBOSE	# Verbose SCSI errors
options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
makeoptions	COPY_SYMTAB=1

# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options 	BUFQ_READPRIO
#options 	BUFQ_PRIOCSCAN

# Development and Debugging options

#options 	ARM700BUGTRACK	# track the ARM700 swi bug
#options 	PORTMASTER	# Enable PortMaster only options
options 	DIAGNOSTIC	# internal consistency checks
#options 	PMAP_DEBUG	# Enable pmap_debug_level code
options 	DDB		# in-kernel debugger
#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#makeoptions	DEBUG="-g"	# compile full symbol table

config		netbsd	root on ? type ?
options 	NFS_BOOT_DHCP

# serial console ... the conaddr is hardcoded as the pioc address + 4*com offset
# this really be fixed some day
#options 	COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600

# The main bus device
mainbus0 at root

# The boot CPU
cpu0 at mainbus?

# The IOMD
iomd0	at mainbus?

# system clock via IOMD
clock*	at iomd?

# IIC bus device
#iomdiic* at iomd?
#iic* at iomdiic?

# RTC device via IIC bus
#pcfrtc*	at iic? addr 0x50

# VIDC device
vidc0		at mainbus?

# WSCONS
# ws console uses DUMB, SUN or VT100 terminal emulation
#options 	WSEMUL_NODUMB
#options 	WSEMUL_SUN
options 	WSEMUL_VT100

#options 	WSDISPLAY_COMPAT_RAWKBD
options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling

#options 	FONT_BOLD8x16
#options 	FONT_GALLANT12x22	# Very nice font
#options 	FONT_LUCIDA16x29
#options 	FONT_OMRON12x20		# looks funny
#options 	FONT_QVSS8x15		# broken ?
options 	FONT_SONY12x25		# looks like VT220 font
options 	FONT_SONY8x16		# not tested
#options 	FONT_VT220L8x8		# 8x8 font as in Arch. cons
#options 	FONT_VT220L8x16		# 8x(2x8) font as in Arch. cons
#options 	FONT_VT220L8x10		# not tested
#options 	FONT_VT220L8x20		# not tested

vidcvideo0	at vidc?		# wscons driver for VIDC
wsdisplay*	at vidcvideo? console ?	# display itself

iomdkbc*	at iomd?		# IOMD keyboard/mouse interface

pckbd*		at iomdkbc? slot ?	# PS/2 keyboard
options 	PCKBD_LAYOUT=KB_UK
wskbd*		at pckbd?

pms*		at iomdkbc? slot ?	# PS/2 mouse
wsmouse*	at pms?

#qms*		at iomd?		# ws quadmouse driver
#wsmouse*	at qms?			# wsmouse on ws quadmouse

pseudo-device	wsmux

# Audio device
vidcaudio0	at vidc?
audio*		at vidcaudio0

spkr*	at audio?		# PC speaker (synthesized)

rsbus0	at mainbus?

wdc*	at rsbus? 		# eb7500atx build in ide
atabus* at ata?
wd*	at atabus? drive ?
atapibus* at atapi?

# Builtin cs8920M Network adaptor
cs*	at rsbus?

# Builtin DS1687 clock
# Not functioning (yet) 
#ds1687rtc*	at rsbus?

pseudo-device	loop			# network loopback
pseudo-device	bpfilter		# packet filter
pseudo-device	sl			# CSLIP
pseudo-device	ppp			# PPP
pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
pseudo-device	tun			# network tunneling over tty
pseudo-device	tap			# virtual Ethernet
#pseudo-device	gre			# generic L3 over IP tunnel
#pseudo-device	npf			# NPF packet filter
pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith			# IPv[46] tcp relay translation i/f
pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	bridge			# simple inter-network bridging
#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
pseudo-device	pty			# pseudo-terminals
pseudo-device	vnd			# disk-like interface to files
pseudo-device	ccd			# concatenated disk devices
#pseudo-device	cgd			# cryptographic disk devices
pseudo-device	raid			# RAIDframe disk driver
options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
# options	RF_INCLUDE_EVENODD=1
# options	RF_INCLUDE_RAID5_RS=1
# options	RF_INCLUDE_PARITYLOGGING=1
# options	RF_INCLUDE_CHAINDECLUSTER=1
# options	RF_INCLUDE_INTERDECLUSTER=1
# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
#pseudo-device	fss			# file system snapshot device
pseudo-device	md			# Ramdisk driver
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	drvctl			# user control of drive subsystem
pseudo-device	ksyms			# /dev/ksyms
pseudo-device	putter			# for puffs and pud

# If the standard modes don't work for your monitor, you can specify
# a RISC-OS-format monitor definition file and a list of modes here.

#makeoptions	MONITOR="Taxan875+LR"
#makeoptions	MONITOR="AKF60"
#makeoptions	MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900"