EB7500ATX revision 1.54
1#	$NetBSD: EB7500ATX,v 1.54 2013/06/05 23:07:59 christos Exp $
2#
3#	EB7500ATX --- NetBSD/acorn32 complete configuration
4#
5# This machine description file is used to generate the default NetBSD
6# kernel. This generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include		"arch/acorn32/conf/std.acorn32"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident		"EB7500ATX-$Revision: 1.54 $"
26
27# estimated number of users
28maxusers	32
29
30# Standard system options
31
32options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
33#options 	NTP		# NTP phase/frequency locked loop
34
35# CPU options
36options 	CPU_ARM7	# Support the ARM7 core
37
38options		EB7500ATX	# Define in case needed
39
40# File systems
41
42file-system	FFS		# UFS
43#file-system	LFS		# log-structured file system
44file-system	MFS		# memory file system
45file-system	NFS		# Network file system
46file-system 	ADOSFS		# AmigaDOS-compatible file system
47file-system 	EXT2FS		# second extended file system (linux)
48file-system	CD9660		# ISO 9660 + Rock Ridge file system
49file-system	MSDOSFS		# MS-DOS file system
50file-system	FDESC		# /dev/fd
51file-system	FILECORE	# Acorn filecore file system
52file-system	KERNFS		# /kern
53file-system	NULLFS		# loopback file system
54file-system 	OVERLAY		# overlay filesystem
55file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
56file-system	PROCFS		# /proc
57file-system	UMAPFS		# NULLFS + uid and gid remapping
58file-system	UNION		# union file system
59file-system	PTYFS		# /dev/pts/N support
60
61# File system options
62options 	QUOTA		# legacy UFS quotas
63options 	QUOTA2		# new, in-filesystem UFS quotas
64#options 	FFS_EI		# FFS Endian Independent support
65options 	WAPBL		# File system journaling support
66options 	NFSSERVER
67#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
68
69# Networking options
70
71options 	GATEWAY		# packet forwarding
72options 	INET		# IP + ICMP + TCP + UDP
73options 	INET6		# IPV6
74#options 	IPSEC		# IP security
75#options 	IPSEC_DEBUG	# debug for IP security
76#options 	MROUTING	# IP multicast routing
77#options 	PIM		# Protocol Independent Multicast
78options 	NETATALK	# AppleTalk networking
79options 	PFIL_HOOKS	# pfil(9) packet filter hooks
80options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
81options 	PPP_DEFLATE	# Deflate compression support for PPP
82options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
83#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
84
85#options 	ALTQ		# Manipulate network interfaces' output queues
86#options 	ALTQ_BLUE	# Stochastic Fair Blue
87#options 	ALTQ_CBQ	# Class-Based Queueing
88#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
89#options 	ALTQ_FIFOQ	# First-In First-Out Queue
90#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
91#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
92#options 	ALTQ_LOCALQ	# Local queueing discipline
93#options 	ALTQ_PRIQ	# Priority Queueing
94#options 	ALTQ_RED	# Random Early Detection
95#options 	ALTQ_RIO	# RED with IN/OUT
96#options 	ALTQ_WFQ	# Weighted Fair Queueing
97
98# Compatibility options
99
100options 	COMPAT_43	# 4.3BSD compatibility.
101options 	COMPAT_40	# NetBSD 4.0 compatibility.
102options 	COMPAT_30	# NetBSD 3.0 compatibility.
103options 	COMPAT_20	# NetBSD 2.0 compatibility.
104options 	COMPAT_16	# NetBSD 1.6 compatibility.
105options		COMPAT_15	# NetBSD 1.5 compatibility.
106options 	COMPAT_14	# NetBSD 1.4 compatibility.
107options 	COMPAT_13	# NetBSD 1.3 compatibility.
108options 	COMPAT_12	# NetBSD 1.2 compatibility.
109#options 	COMPAT_11	# NetBSD 1.1 compatibility.
110#options 	COMPAT_10	# NetBSD 1.0 compatibility.
111#options 	COMPAT_09	# NetBSD 0.9 compatibility.
112#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
113options		COMPAT_BSDPTY	# /dev/[pt]ty?? ptys.
114
115# Shared memory options
116
117options 	SYSVMSG		# System V-like message queues
118options 	SYSVSEM		# System V-like semaphores
119#options 	SEMMNI=10	# number of semaphore identifiers
120#options 	SEMMNS=60	# number of semaphores in system
121#options 	SEMUME=10	# max number of undo entries per process
122#options 	SEMMNU=30	# number of undo structures in system
123options 	SYSVSHM		# System V-like memory sharing
124
125# Device options
126
127options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
128#options 	MEMORY_DISK_ROOT_SIZE=4100	# Size in blocks
129#options 	MEMORY_DISK_IS_ROOT	# use memory disk as root
130
131# Miscellaneous kernel options
132options 	KTRACE		# system call tracing, a la ktrace(1)
133options 	IRQSTATS	# manage IRQ statistics
134options 	KMEMSTATS	# kernel memory statistics
135#options 	SCSIVERBOSE	# Verbose SCSI errors
136options 	USERCONF	# userconf(4) support
137#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
138#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
139options		SYMTAB_SPACE=275000
140
141# Enable experimental buffer queue strategy for better responsiveness under 
142# high disk I/O load. Use it with caution - it's not proven to be stable yet.
143#options 	BUFQ_READPRIO
144#options 	BUFQ_PRIOCSCAN
145
146# Development and Debugging options
147
148#options 	ARM700BUGTRACK	# track the ARM700 swi bug
149#options 	PORTMASTER	# Enable PortMaster only options
150options 	DIAGNOSTIC	# internal consistency checks
151#options 	PMAP_DEBUG	# Enable pmap_debug_level code
152options 	DDB		# in-kernel debugger
153#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
154#makeoptions	DEBUG="-g"	# compile full symbol table
155
156config		netbsd	root on ? type ?
157options 	NFS_BOOT_DHCP
158
159# serial console ... the conaddr is hardcoded as the pioc address + 4*com offset
160# this really be fixed some day
161#options 	COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600
162
163# The main bus device
164mainbus0 at root
165
166# The boot CPU
167cpu0 at mainbus?
168
169# The IOMD
170iomd0	at mainbus?
171
172# system clock via IOMD
173clock*	at iomd?
174
175# IIC bus device
176#iomdiic* at iomd?
177#iic* at iomdiic?
178
179# RTC device via IIC bus
180#pcfrtc*	at iic? addr 0x50
181
182# VIDC device
183vidc0		at mainbus?
184
185# WSCONS
186# ws console uses DUMB, SUN or VT100 terminal emulation
187#options 	WSEMUL_NODUMB
188#options 	WSEMUL_SUN
189options 	WSEMUL_VT100
190
191#options 	WSDISPLAY_COMPAT_RAWKBD
192options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
193
194#options 	FONT_BOLD8x16
195#options 	FONT_GALLANT12x22	# Very nice font
196#options 	FONT_LUCIDA16x29
197#options 	FONT_OMRON12x20		# looks funny
198#options 	FONT_QVSS8x15		# broken ?
199options 	FONT_SONY12x25		# looks like VT220 font
200options 	FONT_SONY8x16		# not tested
201#options 	FONT_VT220L8x8		# 8x8 font as in Arch. cons
202#options 	FONT_VT220L8x16		# 8x(2x8) font as in Arch. cons
203#options 	FONT_VT220L8x10		# not tested
204#options 	FONT_VT220L8x20		# not tested
205
206vidcvideo0	at vidc?		# wscons driver for VIDC
207wsdisplay*	at vidcvideo? console ?	# display itself
208
209iomdkbc*	at iomd?		# IOMD keyboard/mouse interface
210
211pckbd*		at iomdkbc? slot ?	# PS/2 keyboard
212options 	PCKBD_LAYOUT=KB_UK
213wskbd*		at pckbd?
214
215pms*		at iomdkbc? slot ?	# PS/2 mouse
216wsmouse*	at pms?
217
218#qms*		at iomd?		# ws quadmouse driver
219#wsmouse*	at qms?			# wsmouse on ws quadmouse
220
221pseudo-device	wsmux
222
223# Audio device
224vidcaudio0	at vidc?
225audio*		at vidcaudio0
226
227rsbus0	at mainbus?
228
229wdc*	at rsbus? 		# eb7500atx build in ide
230atabus* at ata?
231wd*	at atabus? drive ?
232atapibus* at atapi?
233
234# Builtin cs8920M Network adaptor
235cs*	at rsbus?
236
237# Builtin DS1687 clock
238# Not functioning (yet) 
239#ds1687rtc*	at rsbus?
240
241pseudo-device	loop			# network loopback
242pseudo-device	bpfilter		# packet filter
243pseudo-device	sl			# CSLIP
244pseudo-device	ppp			# PPP
245pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
246pseudo-device	tun			# network tunneling over tty
247pseudo-device	tap			# virtual Ethernet
248#pseudo-device	gre			# generic L3 over IP tunnel
249#pseudo-device	ipfilter		# ip filter
250pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
251#pseudo-device	faith			# IPv[46] tcp relay translation i/f
252pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
253#pseudo-device	strip			# STarmode Radio IP (Metricon Ricochet)
254pseudo-device	vlan			# IEEE 802.1q encapsulation
255pseudo-device	bridge			# simple inter-network bridging
256#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
257pseudo-device	pty			# pseudo-terminals
258pseudo-device	vnd			# disk-like interface to files
259pseudo-device	ccd			# concatenated disk devices
260#pseudo-device	cgd			# cryptographic disk devices
261pseudo-device	raid			# RAIDframe disk driver
262options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
263# Options to enable various other RAIDframe RAID types.
264# options	RF_INCLUDE_EVENODD=1
265# options	RF_INCLUDE_RAID5_RS=1
266# options	RF_INCLUDE_PARITYLOGGING=1
267# options	RF_INCLUDE_CHAINDECLUSTER=1
268# options	RF_INCLUDE_INTERDECLUSTER=1
269# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
270# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
271#pseudo-device	fss			# file system snapshot device
272pseudo-device	md			# Ramdisk driver
273pseudo-device	clockctl		# user control of clock subsystem
274pseudo-device	ksyms			# /dev/ksyms
275#pseudo-device	pf			# PF packet filter
276#pseudo-device	pflog			# PF log if
277pseudo-device	putter			# for puffs and pud
278
279# If the standard modes don't work for your monitor, you can specify
280# a RISC-OS-format monitor definition file and a list of modes here.
281
282#makeoptions	MONITOR="Taxan875+LR"
283#makeoptions	MONITOR="AKF60"
284#makeoptions	MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900"
285