Home | History | Annotate | Line # | Download | only in podulebus
ptsc.c revision 1.17.2.1
      1 /*	$NetBSD: ptsc.c,v 1.17.2.1 2012/10/30 17:18:38 yamt Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1982, 1990 The Regents of the University of California.
      5  * All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  * 3. Neither the name of the University nor the names of its contributors
     16  *    may be used to endorse or promote products derived from this software
     17  *    without specific prior written permission.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     29  * SUCH DAMAGE.
     30  *
     31  *	@(#)ptsc.c
     32  */
     33 
     34 /*
     35  * Copyright (c) 1995 Scott Stevens
     36  * Copyright (c) 1995 Daniel Widenfalk
     37  * Copyright (c) 1994 Christian E. Hopps
     38  *
     39  * Redistribution and use in source and binary forms, with or without
     40  * modification, are permitted provided that the following conditions
     41  * are met:
     42  * 1. Redistributions of source code must retain the above copyright
     43  *    notice, this list of conditions and the following disclaimer.
     44  * 2. Redistributions in binary form must reproduce the above copyright
     45  *    notice, this list of conditions and the following disclaimer in the
     46  *    documentation and/or other materials provided with the distribution.
     47  * 3. All advertising materials mentioning features or use of this software
     48  *    must display the following acknowledgement:
     49  *	This product includes software developed by the University of
     50  *	California, Berkeley and its contributors.
     51  * 4. Neither the name of the University nor the names of its contributors
     52  *    may be used to endorse or promote products derived from this software
     53  *    without specific prior written permission.
     54  *
     55  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     56  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     57  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     58  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     59  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     60  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     61  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     62  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     63  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     64  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     65  * SUCH DAMAGE.
     66  *
     67  *	@(#)ptsc.c
     68  */
     69 
     70 /*
     71  * Power-tec SCSI-2 driver uses SFAS216 generic driver
     72  *
     73  * Thanks to Alsystems for loaning a development card and providing
     74  * programming information.
     75  */
     76 
     77 #include <sys/cdefs.h>
     78 __KERNEL_RCSID(0, "$NetBSD: ptsc.c,v 1.17.2.1 2012/10/30 17:18:38 yamt Exp $");
     79 
     80 #include <sys/param.h>
     81 #include <sys/systm.h>
     82 #include <sys/kernel.h>
     83 #include <sys/device.h>
     84 
     85 #include <uvm/uvm_extern.h>
     86 
     87 #include <dev/scsipi/scsi_all.h>
     88 #include <dev/scsipi/scsipi_all.h>
     89 #include <dev/scsipi/scsiconf.h>
     90 #include <machine/io.h>
     91 #include <machine/intr.h>
     92 #include <machine/bootconfig.h>
     93 #include <acorn32/podulebus/podulebus.h>
     94 #include <acorn32/podulebus/sfasreg.h>
     95 #include <acorn32/podulebus/sfasvar.h>
     96 #include <acorn32/podulebus/ptscreg.h>
     97 #include <acorn32/podulebus/ptscvar.h>
     98 #include <dev/podulebus/podules.h>
     99 #include <dev/podulebus/powerromreg.h>
    100 
    101 int  ptscmatch(device_t, cfdata_t, void *);
    102 void ptscattach(device_t, device_t, void *);
    103 
    104 CFATTACH_DECL_NEW(ptsc, sizeof(struct ptsc_softc),
    105     ptscmatch, ptscattach, NULL, NULL);
    106 
    107 int ptsc_intr(void *);
    108 int ptsc_setup_dma(void *, void *, int, int);
    109 int ptsc_build_dma_chain(void *, void *, void *, int);
    110 int ptsc_need_bump(void *, void *, int);
    111 void ptsc_led(void *, int);
    112 
    113 void ptsc_set_dma_adr(struct sfas_softc *, void *);
    114 void ptsc_set_dma_tc(struct sfas_softc *, unsigned int);
    115 void ptsc_set_dma_mode(struct sfas_softc *, int);
    116 
    117 /*
    118  * if we are a Power-tec SCSI-2 card
    119  */
    120 int
    121 ptscmatch(device_t parent, cfdata_t cf, void *aux)
    122 {
    123 	struct podule_attach_args *pa = aux;
    124 
    125 	/* Look for the card */
    126 
    127 	/*
    128 	 * All Power-tec cards effectively have PowerROMS.  Note,
    129 	 * though, that here, if we fail to initialise the loader, we
    130 	 * assume this _is_ the right kind of card.
    131 	 */
    132         if (pa->pa_product == PODULE_ALSYSTEMS_SCSI &&
    133             (podulebus_initloader(pa) != 0 ||
    134 	     podloader_callloader(pa, 0, 0) == PRID_POWERTEC))
    135                 return 1;
    136 
    137 	return 0;
    138 }
    139 
    140 void
    141 ptscattach(device_t parent, device_t self, void *aux)
    142 {
    143 	struct ptsc_softc *sc = device_private(self);
    144 	struct podule_attach_args  *pa = aux;
    145 	ptsc_regmap_p	   rp = &sc->sc_regmap;
    146 	vu_char		  *fas;
    147 
    148 	if (pa->pa_podule_number == -1)
    149 		panic("Podule has disappeared !");
    150 
    151 	sc->sc_specific.sc_podule_number = pa->pa_podule_number;
    152 	sc->sc_specific.sc_podule = pa->pa_podule;
    153 	sc->sc_specific.sc_iobase =
    154 	  (vu_char *)sc->sc_specific.sc_podule->fast_base;
    155 
    156 	rp->chipreset = &sc->sc_specific.sc_iobase[PTSC_CONTROL_CHIPRESET];
    157 	rp->inten = &sc->sc_specific.sc_iobase[PTSC_CONTROL_INTEN];
    158 	rp->status = &sc->sc_specific.sc_iobase[PTSC_STATUS];
    159 	rp->term = &sc->sc_specific.sc_iobase[PTSC_CONTROL_TERM];
    160 	rp->led = &sc->sc_specific.sc_iobase[PTSC_CONTROL_LED];
    161 	fas = &sc->sc_specific.sc_iobase[PTSC_FASOFFSET_BASE];
    162 
    163 	rp->FAS216.sfas_tc_low	= &fas[PTSC_FASOFFSET_TCL];
    164 	rp->FAS216.sfas_tc_mid	= &fas[PTSC_FASOFFSET_TCM];
    165 	rp->FAS216.sfas_fifo	= &fas[PTSC_FASOFFSET_FIFO];
    166 	rp->FAS216.sfas_command	= &fas[PTSC_FASOFFSET_COMMAND];
    167 	rp->FAS216.sfas_dest_id	= &fas[PTSC_FASOFFSET_DESTID];
    168 	rp->FAS216.sfas_timeout	= &fas[PTSC_FASOFFSET_TIMEOUT];
    169 	rp->FAS216.sfas_syncper	= &fas[PTSC_FASOFFSET_PERIOD];
    170 	rp->FAS216.sfas_syncoff	= &fas[PTSC_FASOFFSET_OFFSET];
    171 	rp->FAS216.sfas_config1	= &fas[PTSC_FASOFFSET_CONFIG1];
    172 	rp->FAS216.sfas_clkconv	= &fas[PTSC_FASOFFSET_CLOCKCONV];
    173 	rp->FAS216.sfas_test	= &fas[PTSC_FASOFFSET_TEST];
    174 	rp->FAS216.sfas_config2	= &fas[PTSC_FASOFFSET_CONFIG2];
    175 	rp->FAS216.sfas_config3	= &fas[PTSC_FASOFFSET_CONFIG3];
    176 	rp->FAS216.sfas_tc_high	= &fas[PTSC_FASOFFSET_TCH];
    177 	rp->FAS216.sfas_fifo_bot = &fas[PTSC_FASOFFSET_FIFOBOTTOM];
    178 
    179 	sc->sc_softc.sc_dev	= self;
    180 	sc->sc_softc.sc_fas	= (sfas_regmap_p)rp;
    181 	sc->sc_softc.sc_spec	= &sc->sc_specific;
    182 
    183 	sc->sc_softc.sc_led	= ptsc_led;
    184 
    185 	sc->sc_softc.sc_setup_dma	= ptsc_setup_dma;
    186 	sc->sc_softc.sc_build_dma_chain = ptsc_build_dma_chain;
    187 	sc->sc_softc.sc_need_bump	= ptsc_need_bump;
    188 
    189 	sc->sc_softc.sc_clock_freq   = 40;   /* Power-Tec runs at 8MHz */
    190 	sc->sc_softc.sc_timeout      = 250;  /* Set default timeout to 250ms */
    191 	sc->sc_softc.sc_config_flags = SFAS_NO_DMA /*| SFAS_NF_DEBUG*/;
    192 	sc->sc_softc.sc_host_id      = 7;    /* Should check the jumpers */
    193 
    194 	sc->sc_softc.sc_bump_sz = PAGE_SIZE;
    195 	sc->sc_softc.sc_bump_pa = 0x0;
    196 
    197 	sfasinitialize((struct sfas_softc *)sc);
    198 
    199 	sc->sc_softc.sc_adapter.adapt_dev = sc->sc_softc.sc_dev;
    200 	sc->sc_softc.sc_adapter.adapt_nchannels = 1;
    201 	sc->sc_softc.sc_adapter.adapt_openings = 7;
    202 	sc->sc_softc.sc_adapter.adapt_max_periph = 1;
    203 	sc->sc_softc.sc_adapter.adapt_ioctl = NULL;
    204 	sc->sc_softc.sc_adapter.adapt_minphys = sfas_minphys;
    205 	sc->sc_softc.sc_adapter.adapt_request = sfas_scsi_request;
    206 
    207 	sc->sc_softc.sc_channel.chan_adapter = &sc->sc_softc.sc_adapter;
    208 	sc->sc_softc.sc_channel.chan_bustype = &scsi_bustype;
    209 	sc->sc_softc.sc_channel.chan_channel = 0;
    210 	sc->sc_softc.sc_channel.chan_ntargets = 8;
    211 	sc->sc_softc.sc_channel.chan_nluns = 8;
    212 	sc->sc_softc.sc_channel.chan_id = sc->sc_softc.sc_host_id;
    213 
    214 	/* Provide an override for the host id */
    215 	(void)get_bootconf_option(boot_args, "ptsc.hostid",
    216 	    BOOTOPT_TYPE_INT, &sc->sc_softc.sc_channel.chan_id);
    217 
    218 	printf(": host=%d", sc->sc_softc.sc_channel.chan_id);
    219 
    220 	/* initialise the card */
    221 /*	*rp->term = 0;*/
    222 	*rp->inten = (PTSC_POLL?0:1);
    223 	*rp->led = 0;
    224 
    225 #if PTSC_POLL == 0
    226 	evcnt_attach_dynamic(&sc->sc_softc.sc_intrcnt, EVCNT_TYPE_INTR, NULL,
    227 	    device_xname(self), "intr");
    228 	sc->sc_softc.sc_ih = podulebus_irq_establish(pa->pa_ih, IPL_BIO,
    229 	    ptsc_intr, &sc->sc_softc, &sc->sc_softc.sc_intrcnt);
    230 	if (sc->sc_softc.sc_ih == NULL)
    231 	    panic("%s: Cannot install IRQ handler", device_xname(self));
    232 #else
    233 	printf(" polling");
    234 	sc->sc_softc.sc_adapter.adapt_flags = SCSIPI_ADAPT_POLL_ONLY;
    235 #endif
    236 
    237 	printf("\n");
    238 
    239 	/* attach all scsi units on us */
    240 	config_found(self, &sc->sc_softc.sc_channel, scsiprint);
    241 }
    242 
    243 
    244 int
    245 ptsc_intr(void *arg)
    246 {
    247 	struct sfas_softc *dev = arg;
    248 	ptsc_regmap_p	      rp;
    249 	int		      quickints;
    250 
    251 	rp = (ptsc_regmap_p)dev->sc_fas;
    252 
    253 	if (*rp->FAS216.sfas_status & SFAS_STAT_INTERRUPT_PENDING) {
    254 		quickints = 16;
    255 		do {
    256 			dev->sc_status = *rp->FAS216.sfas_status;
    257 			dev->sc_interrupt = *rp->FAS216.sfas_interrupt;
    258 
    259 			if (dev->sc_interrupt & SFAS_INT_RESELECTED) {
    260 				dev->sc_resel[0] = *rp->FAS216.sfas_fifo;
    261 				dev->sc_resel[1] = *rp->FAS216.sfas_fifo;
    262 			}
    263 
    264 			sfasintr(dev);
    265 
    266 		} while((*rp->FAS216.sfas_status & SFAS_STAT_INTERRUPT_PENDING)
    267 			&& --quickints);
    268 	}
    269 
    270 	return(0);	/* Pass interrupt on down the chain */
    271 }
    272 
    273 /* Load transfer address into DMA register */
    274 void
    275 ptsc_set_dma_adr(struct sfas_softc *sc, void *ptr)
    276 {
    277 #if 0
    278 	ptsc_regmap_p	rp;
    279 	unsigned int   *p;
    280 	unsigned int	d;
    281 #endif
    282 #if 0
    283 	printf("ptsc_set_dma_adr(sc = 0x%08x, ptr = 0x%08x)\n", (u_int)sc, (u_int)ptr);
    284 #endif
    285 	return;
    286 #if 0
    287 	rp = (ptsc_regmap_p)sc->sc_fas;
    288 
    289 	d = (unsigned int)ptr;
    290 	p = (unsigned int *)((d & 0xFFFFFF) + (int)rp->dmabase);
    291 
    292 	*rp->clear=0;
    293 	*p = d;
    294 #endif
    295 }
    296 
    297 /* Set DMA transfer counter */
    298 void
    299 ptsc_set_dma_tc(struct sfas_softc *sc, unsigned int len)
    300 {
    301 	printf("ptsc_set_dma_tc(sc, len = 0x%08x)", len);
    302 
    303 	*sc->sc_fas->sfas_tc_low  = len; len >>= 8;
    304 	*sc->sc_fas->sfas_tc_mid  = len; len >>= 8;
    305 	*sc->sc_fas->sfas_tc_high = len;
    306 }
    307 
    308 /* Set DMA mode */
    309 void
    310 ptsc_set_dma_mode(struct sfas_softc *sc, int mode)
    311 {
    312 #if 0
    313 	struct csc_specific *spec;
    314 
    315 	spec = sc->sc_spec;
    316 
    317 	spec->portbits = (spec->portbits & ~FLSC_PB_DMA_BITS) | mode;
    318 	*((flsc_regmap_p)sc->sc_fas)->hardbits = spec->portbits;
    319 #endif
    320 }
    321 
    322 /* Initialize DMA for transfer */
    323 int
    324 ptsc_setup_dma(void *v, void *ptr, int len, int mode)
    325 {
    326 	return(0);
    327 
    328 #if 0
    329 	struct sfas_softc *sc = v;
    330 	int	retval;
    331 
    332 	retval = 0;
    333 
    334 	printf("ptsc_setup_dma(sc, ptr = 0x%08x, len = 0x%08x, mode = 0x%08x)\n", (u_int)ptr, len, mode);
    335 
    336 	switch(mode) {
    337 	case SFAS_DMA_READ:
    338 	case SFAS_DMA_WRITE:
    339 		flsc_set_dma_adr(sc, ptr);
    340 		if (mode == SFAS_DMA_READ)
    341 		  flsc_set_dma_mode(sc,FLSC_PB_ENABLE_DMA | FLSC_PB_DMA_READ);
    342 		else
    343 		  flsc_set_dma_mode(sc,FLSC_PB_ENABLE_DMA | FLSC_PB_DMA_WRITE);
    344 
    345 		flsc_set_dma_tc(sc, len);
    346 		break;
    347 
    348 	case SFAS_DMA_CLEAR:
    349 	default:
    350 		flsc_set_dma_mode(sc, FLSC_PB_DISABLE_DMA);
    351 		flsc_set_dma_adr(sc, 0);
    352 
    353 		retval = (*sc->sc_fas->sfas_tc_high << 16) |
    354 			 (*sc->sc_fas->sfas_tc_mid  <<  8) |
    355 			  *sc->sc_fas->sfas_tc_low;
    356 
    357 		flsc_set_dma_tc(sc, 0);
    358 		break;
    359 	}
    360 
    361 	return(retval);
    362 #endif
    363 }
    364 
    365 /* Check if address and len is ok for DMA transfer */
    366 int
    367 ptsc_need_bump(void *v, void *ptr, int len)
    368 {
    369 	int	p;
    370 
    371 	p = (int)ptr & 0x03;
    372 
    373 	if (p) {
    374 		p = 4-p;
    375 
    376 		if (len < 256)
    377 			p = len;
    378 	}
    379 
    380 	return(p);
    381 }
    382 
    383 /* Interrupt driven routines */
    384 int
    385 ptsc_build_dma_chain(void *v1, void *v2, void *p, int l)
    386 {
    387 #if 0
    388 	vm_offset_t  pa, lastpa;
    389 	char	    *ptr;
    390 	int	     len, prelen, postlen, max_t, n;
    391 #endif
    392 #if 0
    393 	printf("ptsc_build_dma_chain()\n");
    394 #endif
    395 	return(0);
    396 
    397 #if 0
    398 	if (l == 0)
    399 		return(0);
    400 
    401 #define set_link(n, p, l, f)\
    402 do { chain[n].ptr = (p); chain[n].len = (l); chain[n++].flg = (f); } while(0)
    403 
    404 	n = 0;
    405 
    406 	if (l < 512)
    407 		set_link(n, (vm_offset_t)p, l, SFAS_CHAIN_BUMP);
    408 	else if (p >= (void *)0xFF000000) {
    409 		while(l != 0) {
    410 			len = ((l > sc->sc_bump_sz) ? sc->sc_bump_sz : l);
    411 
    412 			set_link(n, (vm_offset_t)p, len, SFAS_CHAIN_BUMP);
    413 
    414 			p += len;
    415 			l -= len;
    416 		}
    417 	} else {
    418 		ptr = p;
    419 		len = l;
    420 
    421 		pa = kvtop(ptr);
    422 		prelen = ((int)ptr & 0x03);
    423 
    424 		if (prelen) {
    425 			prelen = 4-prelen;
    426 			set_link(n, (vm_offset_t)ptr, prelen, SFAS_CHAIN_BUMP);
    427 			ptr += prelen;
    428 			len -= prelen;
    429 		}
    430 
    431 		lastpa = 0;
    432 		while(len > 3) {
    433 			pa = kvtop(ptr);
    434 			max_t = PAGE_SIZE - (pa & PGOFSET);
    435 			if (max_t > len)
    436 			  max_t = len;
    437 
    438 			max_t &= ~3;
    439 
    440 			if (lastpa == pa)
    441 				sc->sc_chain[n-1].len += max_t;
    442 			else
    443 				set_link(n, pa, max_t, SFAS_CHAIN_DMA);
    444 
    445 			lastpa = pa+max_t;
    446 
    447 			ptr += max_t;
    448 			len -= max_t;
    449 		}
    450 
    451 		if (len)
    452 			set_link(n, (vm_offset_t)ptr, len, SFAS_CHAIN_BUMP);
    453 	}
    454 
    455 	return(n);
    456 #endif
    457 }
    458 
    459 /* Turn on/off led */
    460 void
    461 ptsc_led(void *v, int mode)
    462 {
    463 	struct sfas_softc	*sc = v;
    464 	ptsc_regmap_p		rp;
    465 
    466 	rp = (ptsc_regmap_p)sc->sc_fas;
    467 
    468 	if (mode) {
    469 		sc->sc_led_status++;
    470 	} else {
    471 		if (sc->sc_led_status)
    472 			sc->sc_led_status--;
    473 	}
    474 	*rp->led = (sc->sc_led_status?1:0);
    475 }
    476