Home | History | Annotate | Line # | Download | only in pci
dwlpx.c revision 1.32 
      1 /* $NetBSD: dwlpx.c,v 1.32 2007/03/04 05:59:11 christos Exp $ */
      2 
      3 /*
      4  * Copyright (c) 1997 by Matthew Jacob
      5  * NASA AMES Research Center.
      6  * All rights reserved.
      7  *
      8  * Redistribution and use in source and binary forms, with or without
      9  * modification, are permitted provided that the following conditions
     10  * are met:
     11  * 1. Redistributions of source code must retain the above copyright
     12  *    notice immediately at the beginning of the file, without modification,
     13  *    this list of conditions, and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  * 3. The name of the author may not be used to endorse or promote products
     18  *    derived from this software without specific prior written permission.
     19  *
     20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     23  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
     24  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     30  * SUCH DAMAGE.
     31  */
     32 
     33 #include <sys/cdefs.h>			/* RCS ID & Copyright macro defns */
     34 
     35 __KERNEL_RCSID(0, "$NetBSD: dwlpx.c,v 1.32 2007/03/04 05:59:11 christos Exp $");
     36 
     37 #include <sys/param.h>
     38 #include <sys/systm.h>
     39 #include <sys/kernel.h>
     40 #include <sys/device.h>
     41 
     42 #include <uvm/uvm_extern.h>
     43 
     44 #include <machine/autoconf.h>
     45 
     46 #include <dev/pci/pcireg.h>
     47 #include <dev/pci/pcivar.h>
     48 
     49 #include <alpha/tlsb/tlsbreg.h>
     50 #include <alpha/tlsb/kftxxvar.h>
     51 #include <alpha/tlsb/kftxxreg.h>
     52 #include <alpha/pci/dwlpxreg.h>
     53 #include <alpha/pci/dwlpxvar.h>
     54 #include <alpha/pci/pci_kn8ae.h>
     55 
     56 #define	KV(_addr)	((void *)ALPHA_PHYS_TO_K0SEG((_addr)))
     57 #define	DWLPX_SYSBASE(sc)	\
     58 	    ((((unsigned long)((sc)->dwlpx_node - 4))	<< 36) |	\
     59 	     (((unsigned long) (sc)->dwlpx_hosenum)	<< 34) |	\
     60 	     (1LL					<< 39))
     61 #define	DWLPX_SYSBASE1(node, hosenum)	\
     62 	    ((((unsigned long)(node - 4))	<< 36) |	\
     63 	     (((unsigned long) hosenum)	        << 34) |	\
     64 	     (1LL					<< 39))
     65 
     66 
     67 static int	dwlpxmatch __P((struct device *, struct cfdata *, void *));
     68 static void	dwlpxattach __P((struct device *, struct device *, void *));
     69 CFATTACH_DECL(dwlpx, sizeof(struct dwlpx_softc),
     70     dwlpxmatch, dwlpxattach, NULL, NULL);
     71 
     72 extern struct cfdriver dwlpx_cd;
     73 
     74 void	dwlpx_errintr(void *, u_long vec);
     75 
     76 static int
     77 dwlpxmatch(parent, cf, aux)
     78 	struct device *parent;
     79 	struct cfdata *cf;
     80 	void *aux;
     81 {
     82 	struct kft_dev_attach_args *ka = aux;
     83 	unsigned long ls;
     84 	u_int32_t ctl;
     85 
     86 	if (strcmp(ka->ka_name, dwlpx_cd.cd_name) != 0)
     87 		return (0);
     88 
     89 	ls = DWLPX_SYSBASE1(ka->ka_node, ka->ka_hosenum);
     90 
     91 	/*
     92 	 * Probe the first HPC to make sure this really is a dwlpx and
     93 	 * nothing else.
     94 	 */
     95 	if (badaddr(KV(PCIA_CTL(1) + ls), sizeof (ctl)) != 0) {
     96 		/*
     97 		 * If we are here something went wrong. One reason
     98 		 * could be that this is a dwlma and not a dwlpx.
     99 		 *
    100 		 * We can not clear potential illegal CSR errors here
    101 		 * since it is unknown hardware.
    102 		 */
    103 		return (0);
    104 	}
    105 
    106 	return (1);
    107 }
    108 
    109 static void
    110 dwlpxattach(parent, self, aux)
    111 	struct device *parent;
    112 	struct device *self;
    113 	void *aux;
    114 {
    115 	static int once = 0;
    116 	struct dwlpx_softc *sc = (struct dwlpx_softc *)self;
    117 	struct dwlpx_config *ccp = &sc->dwlpx_cc;
    118 	struct kft_dev_attach_args *ka = aux;
    119 	struct pcibus_attach_args pba;
    120 	u_int32_t pcia_present;
    121 
    122 	sc->dwlpx_node = ka->ka_node;
    123 	sc->dwlpx_dtype = ka->ka_dtype;
    124 	sc->dwlpx_hosenum = ka->ka_hosenum;
    125 
    126 	dwlpx_init(sc);
    127 	dwlpx_dma_init(ccp);
    128 
    129 	pcia_present = REGVAL(PCIA_PRESENT + ccp->cc_sysbase);
    130 	printf(": PCIA rev. %d, STD I/O %spresent, %dK S/G entries\n",
    131 	    (pcia_present >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK,
    132 	    (pcia_present & PCIA_PRESENT_STDIO) == 0 ? "not " : "",
    133 	    sc->dwlpx_sgmapsz == DWLPX_SG128K ? 128 : 32);
    134 
    135 #if 0
    136 	{
    137 		int hpc, slot, slotval;
    138 		const char *str;
    139 		for (hpc = 0; hpc < sc->dwlpx_nhpc; hpc++) {
    140 			for (slot = 0; slot < 4; slot++) {
    141 				slotval = (pcia_present >>
    142 				    PCIA_PRESENT_SLOTSHIFT(hpc, slot)) &
    143 				    PCIA_PRESENT_SLOT_MASK;
    144 				if (slotval == PCIA_PRESENT_SLOT_NONE)
    145 					continue;
    146 				switch (slotval) {
    147 				case PCIA_PRESENT_SLOT_25W:
    148 					str = "25";
    149 					break;
    150 				case PCIA_PRESENT_SLOT_15W:
    151 					str = "15";
    152 					break;
    153 				case PCIA_PRESENT_SLOW_7W:
    154 				default:		/* XXX gcc */
    155 					str = "7.5";
    156 					break;
    157 				}
    158 				printf("%s: hpc %d slot %d: %s watt module\n",
    159 				    sc->dwlpx_dev.dv_xname, hpc, slot, str);
    160 			}
    161 		}
    162 	}
    163 #endif
    164 
    165 	if (once == 0) {
    166 		/*
    167 		 * Set up interrupts
    168 		 */
    169 		pci_kn8ae_pickintr(&sc->dwlpx_cc, 1);
    170 		once++;
    171 	} else {
    172 		pci_kn8ae_pickintr(&sc->dwlpx_cc, 0);
    173 	}
    174 
    175 	/*
    176 	 * Attach PCI bus
    177 	 */
    178 	pba.pba_iot = &sc->dwlpx_cc.cc_iot;
    179 	pba.pba_memt = &sc->dwlpx_cc.cc_memt;
    180 	pba.pba_dmat =	/* start with direct, may change... */
    181 	    alphabus_dma_get_tag(&sc->dwlpx_cc.cc_dmat_direct, ALPHA_BUS_PCI);
    182 	pba.pba_dmat64 = NULL;
    183 	pba.pba_pc = &sc->dwlpx_cc.cc_pc;
    184 	pba.pba_bus = 0;
    185 	pba.pba_bridgetag = NULL;
    186 	pba.pba_flags = PCI_FLAGS_IO_ENABLED | PCI_FLAGS_MEM_ENABLED |
    187 	    PCI_FLAGS_MRL_OKAY | PCI_FLAGS_MRM_OKAY | PCI_FLAGS_MWI_OKAY;
    188 	config_found_ia(self, "pcibus", &pba, pcibusprint);
    189 }
    190 
    191 void
    192 dwlpx_init(sc)
    193 	struct dwlpx_softc *sc;
    194 {
    195 	u_int32_t ctl;
    196 	struct dwlpx_config *ccp = &sc->dwlpx_cc;
    197 	unsigned long vec, ls = DWLPX_SYSBASE(sc);
    198 	int i;
    199 
    200 	if (ccp->cc_initted == 0) {
    201 		/*
    202 		 * On reads, you get a fault if you read a nonexisted HPC.
    203 		 * We know the internal KFTIA hose (hose 0) has only 2 HPCs,
    204 		 * but we can also actually probe for HPCs.
    205 		 * Assume at least one.
    206 		 */
    207 		for (sc->dwlpx_nhpc = 1; sc->dwlpx_nhpc < NHPC;
    208 		    sc->dwlpx_nhpc++) {
    209 			if (badaddr(KV(PCIA_CTL(sc->dwlpx_nhpc) + ls),
    210 			    sizeof (ctl)) != 0) {
    211 				break;
    212 			}
    213 		}
    214 		if (sc->dwlpx_nhpc != NHPC) {
    215 			/* clear (potential) Illegal CSR Address Error */
    216 			REGVAL(PCIA_ERR(0) + DWLPX_SYSBASE(sc)) =
    217 				PCIA_ERR_ALLERR;
    218 		}
    219 
    220 		dwlpx_bus_io_init(&ccp->cc_iot, ccp);
    221 		dwlpx_bus_mem_init(&ccp->cc_memt, ccp);
    222 	}
    223 	dwlpx_pci_init(&ccp->cc_pc, ccp);
    224 	ccp->cc_sc = sc;
    225 
    226 	/*
    227 	 * Establish a precalculated base for convenience's sake.
    228 	 */
    229 	ccp->cc_sysbase = ls;
    230 
    231 	/*
    232 	 * If there are only 2 HPCs, then the 'present' register is not
    233 	 * implemented, so there will only ever be 32K SG entries. Otherwise
    234 	 * any revision greater than zero will have 128K entries.
    235 	 */
    236 	ctl = REGVAL(PCIA_PRESENT + ccp->cc_sysbase);
    237 	if (sc->dwlpx_nhpc == 2) {
    238 		sc->dwlpx_sgmapsz = DWLPX_SG32K;
    239 #if 0
    240 	/*
    241 	 * As of 2/25/98- When I enable SG128K, and then have to flip
    242 	 * TBIT below, I get bad SGRAM errors. We'll fix this later
    243 	 * if this gets important.
    244 	 */
    245 	} else if ((ctl >> PCIA_PRESENT_REVSHIFT) & PCIA_PRESENT_REVMASK) {
    246 		sc->dwlpx_sgmapsz = DWLPX_SG128K;
    247 #endif
    248 	} else {
    249 		sc->dwlpx_sgmapsz = DWLPX_SG32K;
    250 	}
    251 
    252 	/*
    253 	 * Set up interrupt stuff for this DWLPX.
    254 	 *
    255 	 * Note that all PCI interrupt pins are disabled at this time.
    256 	 *
    257 	 * Do this even for all HPCs- even for the nonexistent
    258 	 * one on hose zero of a KFTIA.
    259 	 */
    260 	vec = scb_alloc(dwlpx_errintr, sc);
    261 	if (vec == SCB_ALLOC_FAILED)
    262 		panic("%s: unable to allocate error vector",
    263 		    sc->dwlpx_dev.dv_xname);
    264 	printf("%s: error interrupt at vector 0x%lx\n",
    265 	    sc->dwlpx_dev.dv_xname, vec);
    266 	for (i = 0; i < NHPC; i++) {
    267 		REGVAL(PCIA_IMASK(i) + ccp->cc_sysbase) = DWLPX_IMASK_DFLT;
    268 		REGVAL(PCIA_ERRVEC(i) + ccp->cc_sysbase) = vec;
    269 	}
    270 
    271 	/*
    272 	 * Establish HAE values, as well as make sure of sanity elsewhere.
    273 	 */
    274 	for (i = 0; i < sc->dwlpx_nhpc; i++) {
    275 		ctl = REGVAL(PCIA_CTL(i) + ccp->cc_sysbase);
    276 		ctl &= 0x0fffffff;
    277 		ctl &= ~(PCIA_CTL_MHAE(0x1f) | PCIA_CTL_IHAE(0x1f));
    278 		/*
    279 		 * I originally also had it or'ing in 3, which makes no sense.
    280 		 */
    281 
    282 		ctl |= PCIA_CTL_RMMENA | PCIA_CTL_RMMARB;
    283 
    284 		/*
    285 		 * Only valid if we're attached to a KFTIA or a KTHA.
    286 		 */
    287 		ctl |= PCIA_CTL_3UP;
    288 
    289 		ctl |= PCIA_CTL_CUTENA;
    290 
    291 		/*
    292 		 * Fit in appropriate S/G Map Ram size.
    293 		 */
    294 		if (sc->dwlpx_sgmapsz == DWLPX_SG32K)
    295 			ctl |= PCIA_CTL_SG32K;
    296 		else if (sc->dwlpx_sgmapsz == DWLPX_SG128K)
    297 			ctl |= PCIA_CTL_SG128K;
    298 		else
    299 			ctl |= PCIA_CTL_SG32K;
    300 
    301 		REGVAL(PCIA_CTL(i) + ccp->cc_sysbase) = ctl;
    302 	}
    303 	/*
    304 	 * Enable TBIT if required
    305 	 */
    306 	if (sc->dwlpx_sgmapsz == DWLPX_SG128K)
    307 		REGVAL(PCIA_TBIT + ccp->cc_sysbase) = 1;
    308 	alpha_mb();
    309 	ccp->cc_initted = 1;
    310 }
    311 
    312 void
    313 dwlpx_errintr(arg, vec)
    314 	void *arg;
    315 	unsigned long vec;
    316 {
    317 	struct dwlpx_softc *sc = arg;
    318 	struct dwlpx_config *ccp = &sc->dwlpx_cc;
    319 	int i;
    320 	struct {
    321 		u_int32_t err;
    322 		u_int32_t addr;
    323 	} hpcs[NHPC];
    324 
    325 	for (i = 0; i < sc->dwlpx_nhpc; i++) {
    326 		hpcs[i].err = REGVAL(PCIA_ERR(i) + ccp->cc_sysbase);
    327 		hpcs[i].addr = REGVAL(PCIA_FADR(i) + ccp->cc_sysbase);
    328 	}
    329 	printf("%s: node %d hose %d error interrupt\n",
    330 	    sc->dwlpx_dev.dv_xname, sc->dwlpx_node, sc->dwlpx_hosenum);
    331 
    332 	for (i = 0; i < sc->dwlpx_nhpc; i++) {
    333 		if ((hpcs[i].err & PCIA_ERR_ERROR) == 0)
    334 			continue;
    335 		printf("\tHPC %d: ERR=0x%08x; DMA %s Memory, "
    336 			"Failing Address 0x%x\n",
    337 			i, hpcs[i].err, hpcs[i].addr & 0x1? "write to" :
    338 			"read from", hpcs[i].addr & ~3);
    339 		if (hpcs[i].err & PCIA_ERR_SERR_L)
    340 			printf("\t       PCI device asserted SERR_L\n");
    341 		if (hpcs[i].err & PCIA_ERR_ILAT)
    342 			printf("\t       Incremental Latency Exceeded\n");
    343 		if (hpcs[i].err & PCIA_ERR_SGPRTY)
    344 			printf("\t       CPU access of SG RAM Parity Error\n");
    345 		if (hpcs[i].err & PCIA_ERR_ILLCSR)
    346 			printf("\t       Illegal CSR Address Error\n");
    347 		if (hpcs[i].err & PCIA_ERR_PCINXM)
    348 			printf("\t       Nonexistent PCI Address Error\n");
    349 		if (hpcs[i].err & PCIA_ERR_DSCERR)
    350 			printf("\t       PCI Target Disconnect Error\n");
    351 		if (hpcs[i].err & PCIA_ERR_ABRT)
    352 			printf("\t       PCI Target Abort Error\n");
    353 		if (hpcs[i].err & PCIA_ERR_WPRTY)
    354 			printf("\t       PCI Write Parity Error\n");
    355 		if (hpcs[i].err & PCIA_ERR_DPERR)
    356 			printf("\t       PCI Data Parity Error\n");
    357 		if (hpcs[i].err & PCIA_ERR_APERR)
    358 			printf("\t       PCI Address Parity Error\n");
    359 		if (hpcs[i].err & PCIA_ERR_DFLT)
    360 			printf("\t       SG Map RAM Invalid Entry Error\n");
    361 		if (hpcs[i].err & PCIA_ERR_DPRTY)
    362 			printf("\t       DMA access of SG RAM Parity Error\n");
    363 		if (hpcs[i].err & PCIA_ERR_DRPERR)
    364 			printf("\t       DMA Read Return Parity Error\n");
    365 		if (hpcs[i].err & PCIA_ERR_MABRT)
    366 			printf("\t       PCI Master Abort Error\n");
    367 		if (hpcs[i].err & PCIA_ERR_CPRTY)
    368 			printf("\t       CSR Parity Error\n");
    369 		if (hpcs[i].err & PCIA_ERR_COVR)
    370 			printf("\t       CSR Overrun Error\n");
    371 		if (hpcs[i].err & PCIA_ERR_MBPERR)
    372 			printf("\t       Mailbox Parity Error\n");
    373 		if (hpcs[i].err & PCIA_ERR_MBILI)
    374 			printf("\t       Mailbox Illegal Length Error\n");
    375 		REGVAL(PCIA_ERR(i) + ccp->cc_sysbase) = hpcs[i].err;
    376 	}
    377 }
    378