Home | History | Annotate | Line # | Download | only in acpi
acpi_wakecode.S revision 1.1.2.10
      1  1.1.2.10     joerg /*	$NetBSD: acpi_wakecode.S,v 1.1.2.10 2007/10/26 15:42:04 joerg Exp $	*/
      2   1.1.2.1  jmcneill 
      3   1.1.2.1  jmcneill /*-
      4   1.1.2.5     joerg  * Copyright (c) 2002 The NetBSD Foundation, Inc.
      5   1.1.2.1  jmcneill  * All rights reserved.
      6   1.1.2.1  jmcneill  *
      7   1.1.2.1  jmcneill  * This code is derived from software contributed to The NetBSD Foundation
      8   1.1.2.5     joerg  * by Takuya SHIOZAKI.
      9   1.1.2.1  jmcneill  *
     10   1.1.2.1  jmcneill  * Redistribution and use in source and binary forms, with or without
     11   1.1.2.1  jmcneill  * modification, are permitted provided that the following conditions
     12   1.1.2.1  jmcneill  * are met:
     13   1.1.2.1  jmcneill  * 1. Redistributions of source code must retain the above copyright
     14   1.1.2.1  jmcneill  *    notice, this list of conditions and the following disclaimer.
     15   1.1.2.1  jmcneill  * 2. Redistributions in binary form must reproduce the above copyright
     16   1.1.2.1  jmcneill  *    notice, this list of conditions and the following disclaimer in the
     17   1.1.2.1  jmcneill  *    documentation and/or other materials provided with the distribution.
     18   1.1.2.1  jmcneill  * 3. All advertising materials mentioning features or use of this software
     19   1.1.2.1  jmcneill  *    must display the following acknowledgement:
     20   1.1.2.1  jmcneill  *	  This product includes software developed by the NetBSD
     21   1.1.2.1  jmcneill  *	  Foundation, Inc. and its contributors.
     22   1.1.2.1  jmcneill  * 4. Neither the name of The NetBSD Foundation nor the names of its
     23   1.1.2.1  jmcneill  *    contributors may be used to endorse or promote products derived
     24   1.1.2.1  jmcneill  *    from this software without specific prior written permission.
     25   1.1.2.1  jmcneill  *
     26   1.1.2.1  jmcneill  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     27   1.1.2.1  jmcneill  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     28   1.1.2.1  jmcneill  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     29   1.1.2.1  jmcneill  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     30   1.1.2.1  jmcneill  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     31   1.1.2.1  jmcneill  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     32   1.1.2.1  jmcneill  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     33   1.1.2.1  jmcneill  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     34   1.1.2.1  jmcneill  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     35   1.1.2.1  jmcneill  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     36   1.1.2.1  jmcneill  * POSSIBILITY OF SUCH DAMAGE.
     37   1.1.2.1  jmcneill  */
     38   1.1.2.1  jmcneill 
     39   1.1.2.1  jmcneill 
     40   1.1.2.1  jmcneill /*
     41   1.1.2.1  jmcneill  * This code is derived from FreeBSD.  Original copyrights:
     42   1.1.2.1  jmcneill  *
     43   1.1.2.1  jmcneill  * Copyright (c) 2001 Takanori Watanabe <takawata (at) jp.freebsd.org>
     44   1.1.2.1  jmcneill  * Copyright (c) 2001 Mitsuru IWASAKI <iwasaki (at) jp.freebsd.org>
     45   1.1.2.1  jmcneill  * All rights reserved.
     46   1.1.2.1  jmcneill  *
     47   1.1.2.1  jmcneill  * Redistribution and use in source and binary forms, with or without
     48   1.1.2.1  jmcneill  * modification, are permitted provided that the following conditions
     49   1.1.2.1  jmcneill  * are met:
     50   1.1.2.1  jmcneill  * 1. Redistributions of source code must retain the above copyright
     51   1.1.2.1  jmcneill  *    notice, this list of conditions and the following disclaimer.
     52   1.1.2.1  jmcneill  * 2. Redistributions in binary form must reproduce the above copyright
     53   1.1.2.1  jmcneill  *    notice, this list of conditions and the following disclaimer in the
     54   1.1.2.1  jmcneill  *    documentation and/or other materials provided with the distribution.
     55   1.1.2.1  jmcneill  *
     56   1.1.2.1  jmcneill  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     57   1.1.2.1  jmcneill  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     58   1.1.2.1  jmcneill  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     59   1.1.2.1  jmcneill  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     60   1.1.2.1  jmcneill  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     61   1.1.2.1  jmcneill  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     62   1.1.2.1  jmcneill  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     63   1.1.2.1  jmcneill  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     64   1.1.2.1  jmcneill  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     65   1.1.2.1  jmcneill  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     66   1.1.2.1  jmcneill  * SUCH DAMAGE.
     67   1.1.2.1  jmcneill  *
     68   1.1.2.1  jmcneill  *	FreeBSD: src/sys/i386/acpica/acpi_wakecode.S,v 1.1 2001/07/20 06:07:31 takawata Exp
     69   1.1.2.1  jmcneill  */
     70   1.1.2.1  jmcneill 
     71   1.1.2.1  jmcneill #define _LOCORE
     72   1.1.2.1  jmcneill 
     73   1.1.2.5     joerg #include <machine/psl.h>
     74   1.1.2.1  jmcneill #include <machine/specialreg.h>
     75   1.1.2.1  jmcneill #include <machine/segments.h>
     76   1.1.2.1  jmcneill 
     77   1.1.2.6     joerg #define	ACPI_WAKEUP_ADDR	0x3000
     78   1.1.2.6     joerg 
     79   1.1.2.1  jmcneill 	.text
     80   1.1.2.1  jmcneill 	.code16
     81   1.1.2.5     joerg 	.org 0	/* ACPI spec says: cs==(phys>>8), ip==(phys&0x000F) */
     82   1.1.2.3  jmcneill 	.globl wakeup_16
     83   1.1.2.1  jmcneill wakeup_16:
     84   1.1.2.1  jmcneill 	nop
     85   1.1.2.1  jmcneill 	cli
     86   1.1.2.1  jmcneill 	cld
     87   1.1.2.1  jmcneill 
     88   1.1.2.1  jmcneill 	/* Set up segment registers for real mode */
     89   1.1.2.5     joerg 	movw	%cs,%ax
     90   1.1.2.5     joerg 	movw	%ax,%ds
     91   1.1.2.5     joerg 	movw	%ax,%ss
     92   1.1.2.1  jmcneill 
     93   1.1.2.5     joerg 	/* Small call stack */
     94   1.1.2.5     joerg 	mov	$0x1000,%sp
     95   1.1.2.1  jmcneill 
     96   1.1.2.1  jmcneill 	/* Clear flags */
     97   1.1.2.1  jmcneill 	pushl	$0
     98   1.1.2.1  jmcneill 	popfl
     99   1.1.2.1  jmcneill 
    100   1.1.2.1  jmcneill 	/* Only beep on reset if machdep.acpi_beep_on_reset=1 */
    101   1.1.2.5     joerg 	cmpb	$1,WAKEUP_beep_on_reset
    102   1.1.2.5     joerg 	jne	1f
    103   1.1.2.5     joerg 	movb	$0xc0,%al
    104   1.1.2.5     joerg 	outb	%al,$0x42
    105   1.1.2.5     joerg 	movb	$0x04,%al
    106   1.1.2.5     joerg 	outb	%al,$0x42
    107   1.1.2.5     joerg 	inb	$0x61,%al
    108   1.1.2.5     joerg 	orb	$0x3,%al
    109   1.1.2.5     joerg 	outb	%al,$0x61
    110   1.1.2.5     joerg 1:
    111   1.1.2.1  jmcneill 
    112   1.1.2.1  jmcneill 	/* Only reset the VBIOS if machdep.acpi_vbios_reset=1 */
    113   1.1.2.5     joerg 	cmpb	$1,WAKEUP_vbios_reset
    114   1.1.2.5     joerg 	jne	1f
    115   1.1.2.1  jmcneill 
    116   1.1.2.1  jmcneill 	/* Kick the VBIOS. */
    117   1.1.2.5     joerg 	lcall	$0xc000,$3
    118   1.1.2.1  jmcneill 
    119   1.1.2.8     joerg 	/* Reset registers in case the VBIOS changed them. */
    120   1.1.2.5     joerg 	movw	%cs,%ax
    121   1.1.2.5     joerg 	movw	%ax,%ds
    122   1.1.2.5     joerg 	movw	%ax,%ss
    123   1.1.2.5     joerg 1:
    124   1.1.2.1  jmcneill 
    125   1.1.2.5     joerg 	/* Disable beep again if machdep.acpi_beep_on_reset=1 */
    126   1.1.2.5     joerg 	cmpb	$1,WAKEUP_beep_on_reset
    127   1.1.2.5     joerg 	jne	1f
    128   1.1.2.5     joerg 	inb	$0x61,%al
    129   1.1.2.5     joerg 	andb	$0xfc,%al
    130   1.1.2.5     joerg 	outb	%al,$0x61
    131   1.1.2.5     joerg 1:
    132   1.1.2.1  jmcneill 
    133   1.1.2.8     joerg 	/* Load temporary 32bit GDT */
    134   1.1.2.5     joerg 	data32 addr32 lgdt	tmp_gdt
    135   1.1.2.3  jmcneill 
    136   1.1.2.8     joerg 	/* Enable protected mode w/o paging */
    137   1.1.2.5     joerg 	mov	%cr0,%eax
    138   1.1.2.5     joerg 	orl	$(CR0_PE),%eax
    139   1.1.2.5     joerg 	mov	%eax,%cr0
    140   1.1.2.1  jmcneill 
    141   1.1.2.5     joerg wakeup_sw32:
    142   1.1.2.8     joerg 	/*
    143   1.1.2.8     joerg 	 * Switch to protected mode by intersegmental jump.
    144   1.1.2.8     joerg 	 * Target and everything else has to compensate for the new origin
    145   1.1.2.8     joerg 	 * as this is using the flat memory model now.
    146   1.1.2.8     joerg 	 */
    147   1.1.2.8     joerg 
    148   1.1.2.6     joerg 	ljmpl	$0x8,$wakeup_32 + ACPI_WAKEUP_ADDR
    149   1.1.2.1  jmcneill 
    150   1.1.2.1  jmcneill 	.code32
    151   1.1.2.5     joerg 	.align	16
    152   1.1.2.1  jmcneill wakeup_32:
    153   1.1.2.5     joerg 	/*
    154   1.1.2.5     joerg 	 * Switched to protected mode w/o paging
    155   1.1.2.5     joerg 	 */
    156   1.1.2.1  jmcneill 
    157   1.1.2.3  jmcneill 	nop
    158   1.1.2.8     joerg 	/* Set up segment registers and initial stack for protected mode */
    159   1.1.2.6     joerg 	movw	$0x10, %ax
    160   1.1.2.5     joerg 	movw	%ax,%ds
    161   1.1.2.7     joerg 	movw	%ax,%ss
    162   1.1.2.5     joerg 
    163   1.1.2.9     joerg 	movl	$(ACPI_WAKEUP_ADDR + 4096),%esp
    164   1.1.2.1  jmcneill 
    165   1.1.2.5     joerg 	/* First, reset the PSL. */
    166   1.1.2.1  jmcneill 	pushl	$PSL_MBO
    167   1.1.2.1  jmcneill 	popfl
    168   1.1.2.1  jmcneill 
    169  1.1.2.10     joerg 	/* Enable PAE and potentially PSE */
    170  1.1.2.10     joerg 	movl	WAKEUP_r_cr4 + ACPI_WAKEUP_ADDR,%eax
    171   1.1.2.5     joerg 	movl	%eax,%cr4
    172   1.1.2.1  jmcneill 
    173   1.1.2.8     joerg 	/* Enable SYSCALL extension and Long Mode */
    174   1.1.2.5     joerg 	movl	$MSR_EFER,%ecx
    175   1.1.2.1  jmcneill 	rdmsr
    176   1.1.2.5     joerg 	xorl	%eax,%eax
    177   1.1.2.5     joerg 	orl	$(EFER_LME|EFER_SCE),%eax
    178   1.1.2.1  jmcneill 	wrmsr
    179   1.1.2.1  jmcneill 
    180   1.1.2.8     joerg 	/* Load temporary PML4, code will switch to full PML4 later */
    181   1.1.2.6     joerg 	movl	WAKEUP_r_cr3 + ACPI_WAKEUP_ADDR,%eax
    182   1.1.2.5     joerg 	movl	%eax,%cr3
    183   1.1.2.1  jmcneill 
    184   1.1.2.8     joerg 	/* Reload cr0 with normal values, activating paging effectively */
    185   1.1.2.6     joerg 	movl	WAKEUP_r_cr0 + ACPI_WAKEUP_ADDR,%eax
    186   1.1.2.5     joerg         movl	%eax,%cr0
    187   1.1.2.8     joerg 	/* Flush prefetch queue */
    188   1.1.2.5     joerg 	jmp	1f
    189   1.1.2.5     joerg 1:
    190   1.1.2.8     joerg 	/* Switch to temporary 64bit GDT */
    191   1.1.2.6     joerg 	lgdt	tmp_gdt64 + ACPI_WAKEUP_ADDR
    192   1.1.2.5     joerg 
    193   1.1.2.8     joerg 	/* Switch to long mode using intersegmental jump. */
    194   1.1.2.6     joerg 	ljmp	$0x8, $wakeup_64 + ACPI_WAKEUP_ADDR
    195   1.1.2.1  jmcneill 
    196   1.1.2.1  jmcneill 	.code64
    197   1.1.2.1  jmcneill wakeup_64:
    198   1.1.2.1  jmcneill 
    199   1.1.2.8     joerg 	/* Reload normal segment registers with correct values */
    200   1.1.2.8     joerg 	movw	$GSEL(GDATA_SEL, SEL_KPL),%ax
    201   1.1.2.5     joerg 	movw	%ax,%ds
    202   1.1.2.6     joerg 	movw	%ax,%es
    203   1.1.2.6     joerg 	movw	%ax,%ss
    204   1.1.2.1  jmcneill 
    205   1.1.2.6     joerg 	movq	WAKEUP_restorecpu + ACPI_WAKEUP_ADDR,%rbx
    206   1.1.2.1  jmcneill 
    207   1.1.2.8     joerg 	/* Switch to the normal kernel GDT */
    208   1.1.2.6     joerg 	lgdt	WAKEUP_r_gdt + ACPI_WAKEUP_ADDR
    209   1.1.2.5     joerg 
    210   1.1.2.8     joerg 	/* Continue with wakeup in the high-level wakeup code */
    211   1.1.2.5     joerg 	jmp	*%rbx
    212   1.1.2.5     joerg 
    213   1.1.2.5     joerg 	.align	8
    214   1.1.2.1  jmcneill tmp_gdt:
    215   1.1.2.1  jmcneill 	.word	0xffff
    216   1.1.2.6     joerg 	.long	tmp_gdtable + ACPI_WAKEUP_ADDR
    217   1.1.2.1  jmcneill 
    218   1.1.2.5     joerg 	.align	8, 0
    219   1.1.2.1  jmcneill tmp_gdtable:
    220   1.1.2.1  jmcneill 	/* null */
    221   1.1.2.1  jmcneill 	.word	0, 0
    222   1.1.2.1  jmcneill 	.byte	0, 0, 0, 0
    223   1.1.2.1  jmcneill 	/* code */
    224   1.1.2.1  jmcneill 	.word	0xffff, 0
    225   1.1.2.1  jmcneill 	.byte	0, 0x9f, 0xcf, 0
    226   1.1.2.1  jmcneill 	/* data */
    227   1.1.2.1  jmcneill 	.word	0xffff, 0
    228   1.1.2.1  jmcneill 	.byte	0, 0x93, 0xcf, 0
    229   1.1.2.1  jmcneill 
    230   1.1.2.1  jmcneill tmp_gdt64:
    231   1.1.2.5     joerg 	.word 0xffff
    232   1.1.2.6     joerg 	.long tmp_gdtable64 + ACPI_WAKEUP_ADDR
    233   1.1.2.1  jmcneill 
    234   1.1.2.1  jmcneill tmp_gdtable64:
    235   1.1.2.5     joerg 	.quad 0x0000000000000000
    236   1.1.2.5     joerg 	.quad 0x00af9a000000ffff
    237   1.1.2.5     joerg 	.quad 0x00cf92000000ffff
    238   1.1.2.5     joerg 
    239   1.1.2.1  jmcneill 	.align	16, 0
    240   1.1.2.5     joerg 	.global WAKEUP_r_cr0
    241   1.1.2.5     joerg WAKEUP_r_cr0:		.quad 0
    242   1.1.2.5     joerg 	.global WAKEUP_r_cr3
    243   1.1.2.5     joerg WAKEUP_r_cr3:		.quad 0
    244  1.1.2.10     joerg 	.global WAKEUP_r_cr4
    245  1.1.2.10     joerg WAKEUP_r_cr4:		.quad 0
    246   1.1.2.5     joerg 
    247   1.1.2.5     joerg 	.global WAKEUP_r_gdt
    248   1.1.2.5     joerg WAKEUP_r_gdt:		.word 0
    249   1.1.2.1  jmcneill 			.quad 0
    250   1.1.2.5     joerg 	.global WAKEUP_restorecpu
    251   1.1.2.5     joerg WAKEUP_restorecpu:	.quad 0
    252   1.1.2.5     joerg 
    253   1.1.2.3  jmcneill 	.global WAKEUP_vbios_reset
    254   1.1.2.5     joerg WAKEUP_vbios_reset:	.byte 0
    255   1.1.2.5     joerg 	.global WAKEUP_beep_on_reset
    256   1.1.2.5     joerg WAKEUP_beep_on_reset:	.byte 0
    257