autoconf.c revision 1.53
1/* $NetBSD: autoconf.c,v 1.53 1997/07/22 15:03:22 is Exp $ */ 2 3/* 4 * Copyright (c) 1994 Christian E. Hopps 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Christian E. Hopps. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32#include <sys/param.h> 33#include <sys/systm.h> 34#include <sys/reboot.h> 35#include <sys/conf.h> 36#include <sys/buf.h> 37#include <sys/device.h> 38#include <sys/disklabel.h> 39#include <sys/disk.h> 40#include <machine/cpu.h> 41#include <amiga/amiga/cfdev.h> 42#include <amiga/amiga/device.h> 43#include <amiga/amiga/custom.h> 44 45void findroot __P((struct device **, int *)); 46void mbattach __P((struct device *, struct device *, void *)); 47int mbprint __P((void *, const char *)); 48int mbmatch __P((struct device *, struct cfdata *, void *)); 49 50int cold; /* 1 if still booting */ 51#include <sys/kernel.h> 52 53struct devnametobdevmaj amiga_nam2blk[] = { 54 { "fd", 2 }, 55 { "sd", 4 }, 56 { "cd", 7 }, 57#ifdef notyet 58 { "md", XXX }, 59#endif 60 { NULL, 0 }, 61}; 62u_long boot_partition; 63 64/* 65 * called at boot time, configure all devices on system 66 */ 67void 68configure() 69{ 70 int s; 71 72 /* 73 * this is the real thing baby (i.e. not console init) 74 */ 75 amiga_realconfig = 1; 76#ifdef DRACO 77 if (is_draco()) { 78 *draco_intena &= ~DRIRQ_GLOBAL; 79 } else 80#endif 81 custom.intena = INTF_INTEN; 82 s = splhigh(); 83 84 if (config_rootfound("mainbus", "mainbus") == NULL) 85 panic("no mainbus found"); 86 87#ifdef DEBUG_KERNEL_START 88 printf("survived autoconf, going to enable interrupts\n"); 89#endif 90 91#ifdef DRACO 92 if (is_draco()) { 93 *draco_intena |= DRIRQ_GLOBAL; 94 /* softints always enabled */ 95 } else 96#endif 97 { 98 custom.intena = INTF_SETCLR | INTF_INTEN; 99 100 /* also enable hardware aided software interrupts */ 101 custom.intena = INTF_SETCLR | INTF_SOFTINT; 102 } 103 splx(s); 104#ifdef DEBUG_KERNEL_START 105 printf("survived interrupt enable\n"); 106#endif 107 cold = 0; 108} 109 110void 111cpu_rootconf() 112{ 113 struct device *booted_device; 114 int booted_partition; 115 116 findroot(&booted_device, &booted_partition); 117#ifdef DEBUG_KERNEL_START 118 printf("survived findroot()\n"); 119#endif 120 setroot(booted_device, booted_partition, amiga_nam2blk); 121#ifdef DEBUG_KERNEL_START 122 printf("survived setroot()\n"); 123#endif 124} 125 126/*ARGSUSED*/ 127int 128simple_devprint(auxp, pnp) 129 void *auxp; 130 const char *pnp; 131{ 132 return(QUIET); 133} 134 135int 136matchname(fp, sp) 137 char *fp, *sp; 138{ 139 int len; 140 141 len = strlen(fp); 142 if (strlen(sp) != len) 143 return(0); 144 if (bcmp(fp, sp, len) == 0) 145 return(1); 146 return(0); 147} 148 149/* 150 * use config_search to find appropriate device, then call that device 151 * directly with NULL device variable storage. A device can then 152 * always tell the difference betwean the real and console init 153 * by checking for NULL. 154 */ 155int 156amiga_config_found(pcfp, pdp, auxp, pfn) 157 struct cfdata *pcfp; 158 struct device *pdp; 159 void *auxp; 160 cfprint_t pfn; 161{ 162 struct device temp; 163 struct cfdata *cf; 164 165 if (amiga_realconfig) 166 return(config_found(pdp, auxp, pfn) != NULL); 167 168 if (pdp == NULL) 169 pdp = &temp; 170 171 pdp->dv_cfdata = pcfp; 172 if ((cf = config_search((cfmatch_t)NULL, pdp, auxp)) != NULL) { 173 cf->cf_attach->ca_attach(pdp, NULL, auxp); 174 pdp->dv_cfdata = NULL; 175 return(1); 176 } 177 pdp->dv_cfdata = NULL; 178 return(0); 179} 180 181/* 182 * this function needs to get enough configured to do a console 183 * basically this means start attaching the grfxx's that support 184 * the console. Kinda hacky but it works. 185 */ 186void 187config_console() 188{ 189 struct cfdata *cf; 190 191 /* 192 * we need mainbus' cfdata. 193 */ 194 cf = config_rootsearch(NULL, "mainbus", "mainbus"); 195 if (cf == NULL) { 196 panic("no mainbus"); 197 } 198 /* 199 * delay clock calibration. 200 */ 201 amiga_config_found(cf, NULL, "clock", NULL); 202 203 /* 204 * internal grf. 205 */ 206#ifdef DRACO 207 if (!(is_draco())) 208#endif 209 amiga_config_found(cf, NULL, "grfcc", NULL); 210 /* 211 * zbus knows when its not for real and will 212 * only configure the appropriate hardware 213 */ 214 amiga_config_found(cf, NULL, "zbus", NULL); 215} 216 217/* 218 * mainbus driver 219 */ 220struct cfattach mainbus_ca = { 221 sizeof(struct device), mbmatch, mbattach 222}; 223 224struct cfdriver mainbus_cd = { 225 NULL, "mainbus", DV_DULL, NULL, 0 226}; 227 228int 229mbmatch(pdp, cfp, auxp) 230 struct device *pdp; 231 struct cfdata *cfp; 232 void *auxp; 233{ 234 235 if (cfp->cf_unit > 0) 236 return(0); 237 /* 238 * We are always here 239 */ 240 return(1); 241} 242 243/* 244 * "find" all the things that should be there. 245 */ 246void 247mbattach(pdp, dp, auxp) 248 struct device *pdp, *dp; 249 void *auxp; 250{ 251 printf("\n"); 252 config_found(dp, "clock", simple_devprint); 253 if (is_a3000() || is_a4000()) { 254 config_found(dp, "a34kbbc", simple_devprint); 255 } else if ( 256#ifdef DRACO 257 !is_draco() && 258#endif 259 !is_a1200()) { 260 261 config_found(dp, "a2kbbc", simple_devprint); 262 } 263#ifdef DRACO 264 if (is_draco()) { 265 config_found(dp, "drbbc", simple_devprint); 266 config_found(dp, "kbd", simple_devprint); 267 config_found(dp, "drsc", simple_devprint); 268 config_found(dp, "drcom", simple_devprint); 269 config_found(dp, "drcom", simple_devprint); 270 /* 271 * XXX -- missing here: 272 * SuperIO chip parallel, floppy 273 * or maybe just make that into a pseudo 274 * ISA bus. 275 */ 276 } else 277#endif 278 { 279 config_found(dp, "ser", simple_devprint); 280 config_found(dp, "par", simple_devprint); 281 config_found(dp, "kbd", simple_devprint); 282 config_found(dp, "ms", simple_devprint); 283 config_found(dp, "ms", simple_devprint); 284 config_found(dp, "grfcc", simple_devprint); 285 config_found(dp, "fdc", simple_devprint); 286 } 287 if (is_a4000() || is_a1200()) 288 config_found(dp, "idesc", simple_devprint); 289 if (is_a4000()) /* Try to configure A4000T SCSI */ 290 config_found(dp, "afsc", simple_devprint); 291 config_found(dp, "zbus", simple_devprint); 292 if (is_a3000()) 293 config_found(dp, "ahsc", simple_devprint); 294} 295 296int 297mbprint(auxp, pnp) 298 void *auxp; 299 const char *pnp; 300{ 301 if (pnp) 302 printf("%s at %s", (char *)auxp, pnp); 303 return(UNCONF); 304} 305 306/* 307 * The system will assign the "booted device" indicator (and thus 308 * rootdev if rootspec is wildcarded) to the first partition 'a' 309 * in preference of boot. However, it does walk unit backwards 310 * to remain compatible with the old Amiga method of picking the 311 * last root found. 312 */ 313#include <sys/fcntl.h> /* XXXX and all that uses it */ 314#include <sys/proc.h> /* XXXX and all that uses it */ 315 316#include "fd.h" 317#include "sd.h" 318#include "cd.h" 319 320#if NFD > 0 321extern struct cfdriver fd_cd; 322#endif 323#if NSD > 0 324extern struct cfdriver sd_cd; 325#endif 326#if NCD > 0 327extern struct cfdriver cd_cd; 328#endif 329 330struct cfdriver *genericconf[] = { 331#if NFD > 0 332 &fd_cd, 333#endif 334#if NSD > 0 335 &sd_cd, 336#endif 337#if NCD > 0 338 &cd_cd, 339#endif 340 NULL, 341}; 342 343void 344findroot(devpp, partp) 345 struct device **devpp; 346 int *partp; 347{ 348 struct disk *dkp; 349 struct partition *pp; 350 struct device **devs; 351 int i, maj, unit; 352 353 /* 354 * Default to "not found". 355 */ 356 *devpp = NULL; 357 358 /* always partition 'a' */ 359 *partp = 0; 360 361#if NSD > 0 362 /* 363 * If we have the boot partition offset (boot_partition), try 364 * to locate the device corresponding to that partition. 365 */ 366 if (boot_partition != 0) { 367 struct bdevsw *bdp; 368 369 for (unit = 0; unit < sd_cd.cd_ndevs; ++unit) { 370 if (sd_cd.cd_devs[unit] == NULL) 371 continue; 372 373 /* 374 * Find the disk corresponding to the current 375 * device. 376 */ 377 devs = (struct device **)sd_cd.cd_devs; 378 if ((dkp = disk_find(devs[unit]->dv_xname)) == NULL) 379 continue; 380 381 if (dkp->dk_driver == NULL || 382 dkp->dk_driver->d_strategy == NULL) 383 continue; 384 for (bdp = bdevsw; bdp < (bdevsw + nblkdev); bdp++) 385 if (bdp->d_strategy == 386 dkp->dk_driver->d_strategy) 387 break; 388 if (bdp->d_open(MAKEDISKDEV(4, unit, 0), 389 FREAD | FNONBLOCK, 0, curproc)) 390 continue; 391 bdp->d_close(MAKEDISKDEV(4, unit, 0), 392 FREAD | FNONBLOCK, 0, curproc); 393 /* 394 * XXX - assumes booting only from 'a' partition 395 */ 396 pp = &dkp->dk_label->d_partitions[0]; 397 if (pp->p_size == 0 || pp->p_fstype != FS_BSDFFS) 398 continue; 399 if (pp->p_offset == boot_partition) { 400 if (*devpp == NULL) { 401 *devpp = devs[unit]; 402 *partp = 0; /* XXX */ 403 } else 404 printf("Ambiguous boot device\n"); 405 } 406 } 407 } 408 if (*devpp != NULL) 409 return; /* we found the boot device */ 410#endif 411 412 for (i = 0; genericconf[i] != NULL; i++) { 413 for (unit = genericconf[i]->cd_ndevs - 1; unit >= 0; unit--) { 414 if (genericconf[i]->cd_devs[unit] == NULL) 415 continue; 416 417 /* 418 * Find the disk structure corresponding to the 419 * current device. 420 */ 421 devs = (struct device **)genericconf[i]->cd_devs; 422 if ((dkp = disk_find(devs[unit]->dv_xname)) == NULL) 423 continue; 424 425 if (dkp->dk_driver == NULL || 426 dkp->dk_driver->d_strategy == NULL) 427 continue; 428 429 for (maj = 0; maj < nblkdev; maj++) 430 if (bdevsw[maj].d_strategy == 431 dkp->dk_driver->d_strategy) 432 break; 433#ifdef DIAGNOSTIC 434 if (maj >= nblkdev) 435 panic("findroot: impossible"); 436#endif 437 438 /* Open disk; forces read of disklabel. */ 439 if ((*bdevsw[maj].d_open)(MAKEDISKDEV(maj, 440 unit, 0), FREAD|FNONBLOCK, 0, &proc0)) 441 continue; 442 (void)(*bdevsw[maj].d_close)(MAKEDISKDEV(maj, 443 unit, 0), FREAD|FNONBLOCK, 0, &proc0); 444 445 pp = &dkp->dk_label->d_partitions[0]; 446 if (pp->p_size != 0 && pp->p_fstype == FS_BSDFFS) { 447 *devpp = devs[unit]; 448 *partp = 0; 449 return; 450 } 451 } 452 } 453} 454 455/* 456 * Try to determine, of this machine is an A3000, which has a builtin 457 * realtime clock and scsi controller, so that this hardware is only 458 * included as "configured" if this IS an A3000 459 */ 460 461int a3000_flag = 1; /* patchable */ 462#ifdef A4000 463int a4000_flag = 1; /* patchable - default to A4000 */ 464#else 465int a4000_flag = 0; /* patchable */ 466#endif 467 468int 469is_a3000() 470{ 471 /* this is a dirty kludge.. but how do you do this RIGHT ? :-) */ 472 extern long boot_fphystart; 473 short sc; 474 475 if ((machineid >> 16) == 3000) 476 return (1); /* It's an A3000 */ 477 if (machineid >> 16) 478 return (0); /* It's not an A3000 */ 479 /* Machine type is unknown, so try to guess it */ 480 /* where is fastram on the A4000 ?? */ 481 /* if fastram is below 0x07000000, assume it's not an A3000 */ 482 if (boot_fphystart < 0x07000000) 483 return(0); 484 /* 485 * OK, fastram starts at or above 0x07000000, check specific 486 * machines 487 */ 488 for (sc = 0; sc < ncfdev; sc++) { 489 switch (cfdev[sc].rom.manid) { 490 case 2026: /* Progressive Peripherals, Inc */ 491 switch (cfdev[sc].rom.prodid) { 492 case 0: /* PPI Mercury - A3000 */ 493 case 1: /* PP&S A3000 '040 */ 494 return(1); 495 case 150: /* PPI Zeus - it's an A2000 */ 496 case 105: /* PP&S A2000 '040 */ 497 case 187: /* PP&S A500 '040 */ 498 return(0); 499 } 500 break; 501 502 case 2112: /* IVS */ 503 switch (cfdev[sc].rom.prodid) { 504 case 242: 505 return(0); /* A2000 accelerator? */ 506 } 507 break; 508 } 509 } 510 return (a3000_flag); /* XXX let flag tell now */ 511} 512 513int 514is_a4000() 515{ 516 if ((machineid >> 16) == 4000) 517 return (1); /* It's an A4000 */ 518 if ((machineid >> 16) == 1200) 519 return (0); /* It's an A1200, so not A4000 */ 520#ifdef DRACO 521 if (is_draco()) 522 return (0); 523#endif 524 /* Do I need this any more? */ 525 if ((custom.deniseid & 0xff) == 0xf8) 526 return (1); 527#ifdef DEBUG 528 if (a4000_flag) 529 printf("Denise ID = %04x\n", (unsigned short)custom.deniseid); 530#endif 531 if (machineid >> 16) 532 return (0); /* It's not an A4000 */ 533 return (a4000_flag); /* Machine type not set */ 534} 535 536int 537is_a1200() 538{ 539 if ((machineid >> 16) == 1200) 540 return (1); /* It's an A1200 */ 541 return (0); /* Machine type not set */ 542} 543 544#ifdef DRACO 545int 546is_draco() 547{ 548 if ((machineid >> 24) == 0x7D) 549 return ((machineid >> 16) & 0xFF); 550 return (0); 551} 552#endif 553