AMIGA revision 1.38.6.6
1 1.38.6.6 nathanw # $NetBSD: AMIGA,v 1.38.6.6 2002/06/20 03:37:50 nathanw Exp $ 2 1.38.6.2 nathanw # 3 1.38.6.6 nathanw # This file was automatically created. 4 1.38.6.6 nathanw # Changes will be lost when make is run in this directory. 5 1.38.6.2 nathanw # 6 1.38.6.6 nathanw # Created from: # NetBSD: GENERIC.in,v 1.1 2002/06/18 17:39:39 lukem Exp $ 7 1.38.6.6 nathanw # 8 1.38.6.6 nathanw # GENERIC machine description file 9 1.38.6.6 nathanw # 10 1.38.6.6 nathanw # This machine description file is used to generate the default NetBSD 11 1.38.6.6 nathanw # kernel. The generic kernel does not include all options, subsystems 12 1.38.6.6 nathanw # and device drivers, but should be useful for most applications. 13 1.38.6.6 nathanw # 14 1.38.6.6 nathanw # The machine description file can be customised for your specific 15 1.38.6.6 nathanw # machine to reduce the kernel size and improve its performance. 16 1.38.6.6 nathanw # 17 1.38.6.6 nathanw # For further information on compiling NetBSD kernels, see the config(8) 18 1.38.6.6 nathanw # man page. 19 1.38.6.6 nathanw # 20 1.38.6.6 nathanw # For further information on hardware support for this architecture, see 21 1.38.6.6 nathanw # the intro(4) man page. For further information about kernel options 22 1.38.6.6 nathanw # for this architecture, see the options(4) man page. For an explanation 23 1.38.6.6 nathanw # of each device driver in this file see the section 4 man page for the 24 1.38.6.6 nathanw # device. 25 1.38.6.3 nathanw 26 1.38.6.3 nathanw 27 1.38.6.6 nathanw include "arch/amiga/conf/std.amiga" 28 1.38.6.3 nathanw 29 1.38.6.6 nathanw options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 1.38.6.3 nathanw 31 1.38.6.6 nathanw #ident "GENERIC-$Revision: 1.38.6.6 $" 32 1.38.6.2 nathanw 33 1.38.6.2 nathanw 34 1.38.6.2 nathanw maxusers 8 35 1.38.6.2 nathanw options RTC_OFFSET=0 36 1.38.6.2 nathanw 37 1.38.6.6 nathanw # 38 1.38.6.6 nathanw # mainboards to support (in addition to Amiga) 39 1.38.6.6 nathanw # 40 1.38.6.2 nathanw options BB060STUPIDROM # You need this, if you have a non-DraCo 41 1.38.6.2 nathanw # MC68060 with an OS ROM up to (at least) 42 1.38.6.2 nathanw # V40 (OS3.1) and want to boot with the 43 1.38.6.2 nathanw # bootblock. 44 1.38.6.2 nathanw # You do not need this if you have a DraCo, 45 1.38.6.2 nathanw # have no 68060 or NEVER use the bootblock 46 1.38.6.2 nathanw options P5PPC68KBOARD # Phase5 PPC/68K board support 47 1.38.6.6 nathanw # 48 1.38.6.6 nathanw # processors this kernel should support 49 1.38.6.6 nathanw # 50 1.38.6.2 nathanw options M68060 # support for 060 51 1.38.6.2 nathanw options M060SP # MC68060 software support (Required for 060) 52 1.38.6.2 nathanw options M68040 # support for 040 53 1.38.6.2 nathanw options FPSP # MC68040 floating point support 54 1.38.6.2 nathanw options M68030 # support for 030 55 1.38.6.2 nathanw options M68020 # support for 020/851 56 1.38.6.2 nathanw options FPU_EMULATE # FPU emulation 57 1.38.6.2 nathanw 58 1.38.6.6 nathanw # 59 1.38.6.6 nathanw # Networking options 60 1.38.6.6 nathanw # 61 1.38.6.2 nathanw options INET # IP networking support (Required) 62 1.38.6.2 nathanw options INET6 # IPV6 63 1.38.6.2 nathanw #options IPSEC # IP security 64 1.38.6.2 nathanw #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 1.38.6.2 nathanw #options IPSEC_DEBUG # debug for IP security 66 1.38.6.2 nathanw #options GATEWAY # Packet forwarding 67 1.38.6.2 nathanw #options DIRECTED_BROADCAST # Broadcast across subnets 68 1.38.6.2 nathanw 69 1.38.6.2 nathanw #options MROUTING # Multicast routing 70 1.38.6.2 nathanw options NS # XNS 71 1.38.6.2 nathanw #options NSIP # XNS tunneling over IP 72 1.38.6.2 nathanw options ISO,TPIP # OSI 73 1.38.6.2 nathanw #options EON # OSI tunneling over IP 74 1.38.6.2 nathanw options CCITT,LLC,HDLC # X.25 75 1.38.6.2 nathanw options NETATALK # AppleTalk networking protocols 76 1.38.6.2 nathanw #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 1.38.6.2 nathanw 78 1.38.6.2 nathanw options PPP_BSDCOMP # BSD-Compress compression support for PPP 79 1.38.6.2 nathanw options PPP_DEFLATE # Deflate compression support for PPP 80 1.38.6.2 nathanw options PPP_FILTER # Active filter support for PPP (requires bpf) 81 1.38.6.2 nathanw options PFIL_HOOKS # pfil(9) packet filter hooks 82 1.38.6.2 nathanw options IPFILTER_LOG # ipmon(8) log support 83 1.38.6.2 nathanw 84 1.38.6.6 nathanw # Filesystems 85 1.38.6.2 nathanw file-system FFS # Berkeley fast file system 86 1.38.6.2 nathanw file-system EXT2FS # second extended file system (linux) 87 1.38.6.2 nathanw #file-system LFS # log-structured filesystem (experimental) 88 1.38.6.2 nathanw 89 1.38.6.2 nathanw file-system MFS # Memory based filesystem 90 1.38.6.2 nathanw 91 1.38.6.2 nathanw file-system NFS # Network File System client side code 92 1.38.6.2 nathanw file-system ADOSFS # AmigaDOS file system 93 1.38.6.2 nathanw file-system CD9660 # ISO 9660 + Rock Ridge filesystem 94 1.38.6.2 nathanw file-system MSDOSFS # MS-DOS filesystem 95 1.38.6.2 nathanw 96 1.38.6.2 nathanw file-system KERNFS # kernel data-structure filesystem 97 1.38.6.2 nathanw 98 1.38.6.2 nathanw file-system FDESC # user file descriptor filesystem 99 1.38.6.2 nathanw file-system NULLFS # loopback filesystem 100 1.38.6.2 nathanw file-system OVERLAY # overlay filesystem 101 1.38.6.2 nathanw #file-system PORTAL # Portal filesystem 102 1.38.6.2 nathanw file-system PROCFS # /proc filesystem 103 1.38.6.2 nathanw file-system UMAPFS # NULLFS + uid and gid remapping 104 1.38.6.2 nathanw file-system UNION # union filesystem 105 1.38.6.2 nathanw 106 1.38.6.6 nathanw # Filesystem options 107 1.38.6.2 nathanw 108 1.38.6.2 nathanw #options FFS_EI # FFS Endian Independant support 109 1.38.6.2 nathanw 110 1.38.6.2 nathanw options QUOTA # User and group quotas in FFS 111 1.38.6.2 nathanw options SOFTDEP # FFS soft updates support. 112 1.38.6.2 nathanw options NFSSERVER # Network File System server side code 113 1.38.6.2 nathanw 114 1.38.6.2 nathanw #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 115 1.38.6.2 nathanw # immutable) behave as system flags. 116 1.38.6.2 nathanw 117 1.38.6.6 nathanw # 118 1.38.6.6 nathanw # Compatibility options for various existing systems 119 1.38.6.6 nathanw # 120 1.38.6.2 nathanw 121 1.38.6.2 nathanw #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 122 1.38.6.2 nathanw options COMPAT_43 # compatibility with 4.3BSD interfaces 123 1.38.6.2 nathanw options COMPAT_09 # compatibility with NetBSD 0.9 124 1.38.6.2 nathanw options COMPAT_10 # compatibility with NetBSD 1.0 125 1.38.6.2 nathanw options COMPAT_12 # compatibility with NetBSD 1.2 126 1.38.6.2 nathanw options COMPAT_13 # compatibility with NetBSD 1.3 127 1.38.6.2 nathanw options COMPAT_14 # compatibility with NetBSD 1.4 128 1.38.6.2 nathanw options COMPAT_SUNOS # Support to run Sun (m68k) executables 129 1.38.6.2 nathanw options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 130 1.38.6.2 nathanw options COMPAT_NOMID # allow nonvalid machine id executables 131 1.38.6.2 nathanw #options COMPAT_LINUX # Support to run Linux/m68k executables 132 1.38.6.3 nathanw 133 1.38.6.3 nathanw options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 134 1.38.6.3 nathanw options COMPAT_AOUT_M68K # actually make some system calls work. 135 1.38.6.2 nathanw 136 1.38.6.6 nathanw # 137 1.38.6.6 nathanw # Support for System V IPC facilities. 138 1.38.6.6 nathanw # 139 1.38.6.2 nathanw options SYSVSHM # System V-like shared memory 140 1.38.6.2 nathanw options SYSVMSG # System V-like messages 141 1.38.6.2 nathanw options SYSVSEM # System V-like semaphores 142 1.38.6.2 nathanw #options SEMMNI=10 # number of semaphore identifiers 143 1.38.6.2 nathanw #options SEMMNS=60 # number of semaphores in system 144 1.38.6.2 nathanw #options SEMUME=10 # max number of undo entries per process 145 1.38.6.2 nathanw #options SEMMNU=30 # number of undo structures in system 146 1.38.6.2 nathanw 147 1.38.6.6 nathanw # 148 1.38.6.6 nathanw # Support for various kernel options 149 1.38.6.6 nathanw # 150 1.38.6.2 nathanw 151 1.38.6.2 nathanw options KTRACE # system call tracing support 152 1.38.6.2 nathanw options LKM # Loadable kernel modules 153 1.38.6.2 nathanw options UCONSOLE # anyone can redirect a virtual console 154 1.38.6.3 nathanw #options INSECURE # disable kernel security levels 155 1.38.6.3 nathanw options SCSIVERBOSE # human readable SCSI error messages 156 1.38.6.5 nathanw #options USERCONF # userconf(4) support 157 1.38.6.6 nathanw options NTP # NTP phase/frequency locked loop 158 1.38.6.6 nathanw #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 159 1.38.6.2 nathanw 160 1.38.6.6 nathanw # 161 1.38.6.6 nathanw # Misc. debugging options 162 1.38.6.6 nathanw # 163 1.38.6.2 nathanw options DDB # Kernel debugger 164 1.38.6.2 nathanw #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 165 1.38.6.2 nathanw options DIAGNOSTIC # Extra kernel sanity checks 166 1.38.6.2 nathanw #options DEBUG # Enable misc. kernel debugging code 167 1.38.6.2 nathanw #options SYSCALL_DEBUG # debug all syscalls. 168 1.38.6.2 nathanw #options SCSIDEBUG # Add SCSI debugging statements 169 1.38.6.6 nathanw #options PANICBUTTON # Forced crash via keypress (?) 170 1.38.6.2 nathanw 171 1.38.6.6 nathanw # 172 1.38.6.6 nathanw # Amiga specific options 173 1.38.6.6 nathanw # 174 1.38.6.2 nathanw #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 175 1.38.6.2 nathanw # first bank of RAM. (default: unlimited) 176 1.38.6.2 nathanw #options NKPTADD=4 # set this for 4 additional KPT pages 177 1.38.6.2 nathanw #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 178 1.38.6.2 nathanw # per 16 MB (1<<24 bytes) of RAM 179 1.38.6.3 nathanw # uncomment and decrease this, or uncomment and 180 1.38.6.2 nathanw # increase NKPTADD if you get "out of PT pages" 181 1.38.6.2 nathanw # panics. 182 1.38.6.2 nathanw 183 1.38.6.6 nathanw # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 184 1.38.6.6 nathanw # before the 10 secondinterval ends, or that KBDRESET does work at all. 185 1.38.6.2 nathanw #options KBDRESET # sync on Ctrl-Amiga-Amiga 186 1.38.6.2 nathanw 187 1.38.6.6 nathanw # These options improve performance with the built-in serial port 188 1.38.6.6 nathanw # on slower Amigas. Try the larger buffers first then lev6_defer. 189 1.38.6.2 nathanw #options SERIBUF_SIZE=4096 190 1.38.6.2 nathanw #options SEROBUF_SIZE=32 191 1.38.6.2 nathanw #options LEV6_DEFER # defers l6 to l4 (below serial l5) 192 1.38.6.2 nathanw 193 1.38.6.2 nathanw options RETINACONSOLE # enable code to allow retina to be console 194 1.38.6.2 nathanw options ULOWELLCONSOLE # enable code to allow a2410 to be console 195 1.38.6.2 nathanw options CL5426CONSOLE # Cirrus console 196 1.38.6.2 nathanw options CV64CONSOLE # CyberVision console 197 1.38.6.2 nathanw options TSENGCONSOLE # Tseng console 198 1.38.6.2 nathanw options CV3DCONSOLE # CyberVision 64/3D console 199 1.38.6.2 nathanw 200 1.38.6.2 nathanw options GRF_ECS # Enhanced Chip Set 201 1.38.6.2 nathanw options GRF_NTSC # NTSC 202 1.38.6.2 nathanw options GRF_PAL # PAL 203 1.38.6.2 nathanw options GRF_A2024 # Support for the A2024 204 1.38.6.2 nathanw options GRF_AGA # AGA Chip Set 205 1.38.6.2 nathanw options GRF_AGA_VGA # AGA VGAONLY timing 206 1.38.6.2 nathanw options GRF_SUPER72 # AGA Super-72 207 1.38.6.2 nathanw #options KFONT_8X11 # 8x11 font 208 1.38.6.2 nathanw 209 1.38.6.6 nathanw # select a font for the console according to the character set and keymap 210 1.38.6.6 nathanw # you want to use 211 1.38.6.6 nathanw options KFONT_CONS_ISO8859_1 212 1.38.6.6 nathanw #options KFONT_CONS_ISO8859_2 213 1.38.6.6 nathanw 214 1.38.6.6 nathanw # This is how you would tell the kernel the A2410 oscillator frequencies: 215 1.38.6.6 nathanw # The used frequencies are the defaults, and do not need option setting 216 1.38.6.2 nathanw #options ULOWELL_OSC1=36000000 217 1.38.6.2 nathanw #options ULOWELL_OSC2=66667000 218 1.38.6.2 nathanw 219 1.38.6.6 nathanw # This is how you specify the blitting speed, higher values may speed up blits 220 1.38.6.6 nathanw # a littel bit. If you raise this value too much some trash may appear. 221 1.38.6.6 nathanw # the commented version is the default. 222 1.38.6.2 nathanw #options RH_MEMCLK=61000000 223 1.38.6.6 nathanw # this option enables the 64 bit sprite which does not work 224 1.38.6.6 nathanw # for quite a few people. E.g. The cursor sprite will turn to a block 225 1.38.6.6 nathanw # when moved to the top of the screen in X. 226 1.38.6.2 nathanw #options RH_64BIT_SPRITE 227 1.38.6.6 nathanw # enables fast scroll code appears to now work on 040 systems. 228 1.38.6.2 nathanw #options RETINA_SPEED_HACK 229 1.38.6.6 nathanw # enables the Hardwarecursor which does not work on some systems. 230 1.38.6.2 nathanw #options RH_HARDWARECURSOR 231 1.38.6.2 nathanw 232 1.38.6.6 nathanw # wscons aware interface to amiga custom chips. 233 1.38.6.6 nathanw # If you enable it enable also wskbd. 234 1.38.6.6 nathanw # 235 1.38.6.2 nathanw 236 1.38.6.2 nathanw #amidisplaycc0 at mainbus0 # wscons interface to custom chips 237 1.38.6.2 nathanw #wsdisplay0 at amidisplaycc0 console ? 238 1.38.6.6 nathanw #options WSEMUL_VT100 239 1.38.6.6 nathanw #options FONT_BOLD8x16 240 1.38.6.6 nathanw #options FONT_VT220L8x10 241 1.38.6.2 nathanw 242 1.38.6.2 nathanw grfcc0 at mainbus0 # custom chips 243 1.38.6.2 nathanw grfrt0 at zbus0 # retina II 244 1.38.6.2 nathanw grfrh0 at zbus0 # retina III 245 1.38.6.6 nathanw grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 246 1.38.6.2 nathanw grful0 at zbus0 # A2410 247 1.38.6.2 nathanw grfcv0 at zbus0 # CyberVision 64 248 1.38.6.2 nathanw grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 249 1.38.6.2 nathanw grfcv3d0 at zbus0 # CyberVision 64/3D 250 1.38.6.2 nathanw 251 1.38.6.2 nathanw grf0 at grfcc0 252 1.38.6.2 nathanw grf1 at grfrt0 253 1.38.6.2 nathanw grf2 at grfrh0 254 1.38.6.2 nathanw grf3 at grfcl? 255 1.38.6.2 nathanw grf4 at grful0 256 1.38.6.2 nathanw grf5 at grfcv0 257 1.38.6.2 nathanw grf6 at grfet? 258 1.38.6.2 nathanw grf7 at grfcv3d0 259 1.38.6.2 nathanw ite0 at grf0 # terminal emulators for grfs 260 1.38.6.2 nathanw ite1 at grf1 # terminal emulators for grfs 261 1.38.6.2 nathanw ite2 at grf2 # terminal emulators for grfs 262 1.38.6.2 nathanw ite3 at grf3 # terminal emulators for grfs 263 1.38.6.2 nathanw ite4 at grf4 # terminal emulators for grfs 264 1.38.6.2 nathanw ite5 at grf5 # terminal emulators for grfs 265 1.38.6.2 nathanw ite6 at grf6 # terminal emulators for grfs 266 1.38.6.2 nathanw ite7 at grf7 # terminal emulators for grfs 267 1.38.6.2 nathanw 268 1.38.6.2 nathanw msc0 at zbus0 # A2232 MSC multiport serial. 269 1.38.6.2 nathanw mfc0 at zbus0 # MultiFaceCard I/O board 270 1.38.6.2 nathanw mfcs0 at mfc0 unit 0 # MFC serial 271 1.38.6.2 nathanw mfcs1 at mfc0 unit 1 # MFC serial 272 1.38.6.2 nathanw #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 273 1.38.6.2 nathanw #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 274 1.38.6.2 nathanw #mfcs2 at mfc1 unit 0 275 1.38.6.2 nathanw #mfcs3 at mfc1 unit 1 276 1.38.6.2 nathanw #mfcp1 at mfc1 unit 0 277 1.38.6.2 nathanw 278 1.38.6.2 nathanw hyper* at zbus? # zbus HyperCom3/3+/4/4+ 279 1.38.6.2 nathanw #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 280 1.38.6.2 nathanw com* at hyper? port ? # Hypercom3/4 serial ports 281 1.38.6.2 nathanw lpt* at hyper? port ? # Hypercom3+/4+ parallel port 282 1.38.6.2 nathanw 283 1.38.6.2 nathanw #options IOBZCLOCK=22118400 # default, uncomment the next line 284 1.38.6.2 nathanw #options IOBZCLOCK=24000000 # if needed. 285 1.38.6.2 nathanw 286 1.38.6.2 nathanw iobl* at zbus? # zbus IOBlix 287 1.38.6.2 nathanw com* at iobl? port ? # IOBlix serial ports 288 1.38.6.2 nathanw lpt* at iobl? port ? # IOBlix parallel ports 289 1.38.6.2 nathanw 290 1.38.6.2 nathanw 291 1.38.6.6 nathanw # 292 1.38.6.6 nathanw # Keyboard device. Optionally can attach a wskbd. 293 1.38.6.6 nathanw # wskbd works together with a wsdisplay so enable them both if you will. 294 1.38.6.6 nathanw # Don't enable wskbd if you use ite. 295 1.38.6.6 nathanw # 296 1.38.6.6 nathanw # XXX in std.amiga: kbd0 at mainbus0 297 1.38.6.6 nathanw 298 1.38.6.2 nathanw #wskbd0 at kbd0 console ? 299 1.38.6.2 nathanw 300 1.38.6.6 nathanw 301 1.38.6.6 nathanw # 302 1.38.6.6 nathanw # Amiga Mainboard devices (sans graphics and keyboard) 303 1.38.6.6 nathanw # 304 1.38.6.2 nathanw 305 1.38.6.2 nathanw ser0 at mainbus0 # Amiga onboard serial 306 1.38.6.2 nathanw par0 at mainbus0 # Amiga onboard parallel 307 1.38.6.2 nathanw ms* at mainbus0 # Amiga mice 308 1.38.6.2 nathanw fdc0 at mainbus0 # Amiga FDC 309 1.38.6.2 nathanw fd* at fdc0 unit ? # floppy disks on the later 310 1.38.6.2 nathanw a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 311 1.38.6.2 nathanw a2kbbc0 at mainbus0 # A2000 battery backed clock 312 1.38.6.2 nathanw aucc* at mainbus0 # Amiga CC audio 313 1.38.6.2 nathanw audio* at aucc? 314 1.38.6.2 nathanw 315 1.38.6.2 nathanw 316 1.38.6.6 nathanw # 317 1.38.6.6 nathanw # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 318 1.38.6.6 nathanw # 319 1.38.6.6 nathanw 320 1.38.6.6 nathanw # Alas, Melody-Z2 dont configure in the DraCo bus. 321 1.38.6.2 nathanw melody* at zbus0 # Melody MPEG audio decoder 322 1.38.6.2 nathanw audio* at melody? 323 1.38.6.2 nathanw 324 1.38.6.2 nathanw repulse* at zbus0 # ALiENDESiGN Repulse 325 1.38.6.2 nathanw audio* at repulse? 326 1.38.6.2 nathanw 327 1.38.6.3 nathanw toccata* at zbus0 # MacroSystem GmbH Toccata 328 1.38.6.3 nathanw audio* at toccata? 329 1.38.6.3 nathanw 330 1.38.6.6 nathanw # Ethernet cards: 331 1.38.6.2 nathanw le* at zbus0 # A2065, Ameristar, Ariadne 332 1.38.6.2 nathanw ne* at zbus0 # AriadneII, X-surf 333 1.38.6.2 nathanw ed* at zbus0 # Hydra, ASDG LanRover 334 1.38.6.2 nathanw es* at zbus0 # CEI A4066 EthernetPLUS 335 1.38.6.2 nathanw qn* at zbus0 # Quicknet 336 1.38.6.2 nathanw 337 1.38.6.6 nathanw # Arcnet 338 1.38.6.2 nathanw bah* at zbus0 # C=/Ameristar A2060 / 560 339 1.38.6.2 nathanw 340 1.38.6.6 nathanw # Greater Valley Product Bus 341 1.38.6.2 nathanw gvpbus* at zbus0 342 1.38.6.2 nathanw 343 1.38.6.6 nathanw # scsi stuff, all possible 344 1.38.6.2 nathanw gtsc0 at gvpbus? # GVP series II scsi 345 1.38.6.2 nathanw scsibus* at gtsc0 346 1.38.6.2 nathanw ahsc0 at mainbus0 # A3000 scsi 347 1.38.6.2 nathanw scsibus* at ahsc0 348 1.38.6.2 nathanw atzsc0 at zbus0 # A2091 scsi 349 1.38.6.2 nathanw scsibus* at atzsc0 350 1.38.6.2 nathanw wstsc0 at zbus0 # Wordsync II scsi 351 1.38.6.2 nathanw scsibus* at wstsc0 352 1.38.6.2 nathanw ivsc0 at zbus0 # IVS scsi 353 1.38.6.2 nathanw scsibus* at ivsc0 354 1.38.6.2 nathanw mlhsc0 at zbus0 # Hacker scsi 355 1.38.6.2 nathanw scsibus* at mlhsc0 356 1.38.6.2 nathanw otgsc0 at zbus0 # 12 gauge scsi 357 1.38.6.2 nathanw scsibus* at otgsc0 358 1.38.6.2 nathanw zssc0 at zbus0 # Zeus scsi 359 1.38.6.2 nathanw scsibus* at zssc0 360 1.38.6.2 nathanw mgnsc0 at zbus0 # Magnum scsi 361 1.38.6.2 nathanw scsibus* at mgnsc0 362 1.38.6.2 nathanw wesc0 at zbus0 # Warp Engine scsi 363 1.38.6.2 nathanw scsibus* at wesc0 364 1.38.6.2 nathanw afsc0 at zbus0 # A4091 scsi 365 1.38.6.2 nathanw scsibus* at afsc0 366 1.38.6.2 nathanw aftsc0 at mainbus0 # A4000T scsi 367 1.38.6.2 nathanw scsibus* at aftsc0 368 1.38.6.2 nathanw flsc0 at zbus0 # FastlaneZ3 scsi 369 1.38.6.2 nathanw scsibus* at flsc0 370 1.38.6.2 nathanw bzsc0 at zbus0 # Blizzard 1230 I,II scsi 371 1.38.6.2 nathanw scsibus* at bzsc0 372 1.38.6.2 nathanw bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 373 1.38.6.2 nathanw scsibus* at bzivsc0 374 1.38.6.2 nathanw bztzsc0 at zbus0 # Blizzard 2060 scsi 375 1.38.6.2 nathanw scsibus* at bztzsc0 376 1.38.6.2 nathanw cbsc0 at zbus0 # CyberSCSI I 377 1.38.6.2 nathanw scsibus* at cbsc0 378 1.38.6.2 nathanw cbiisc0 at zbus0 # CyberSCSI II 379 1.38.6.2 nathanw scsibus* at cbiisc0 380 1.38.6.2 nathanw cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 381 1.38.6.2 nathanw scsibus* at cbiiisc0 382 1.38.6.2 nathanw empsc0 at zbus0 # Emplant scsi 383 1.38.6.2 nathanw scsibus* at empsc0 384 1.38.6.2 nathanw #idesc0 at mainbus0 # A4000 & A1200 IDE 385 1.38.6.2 nathanw #scsibus* at idesc0 386 1.38.6.2 nathanw 387 1.38.6.6 nathanw # <<< comment out the wdc/atapibus entries below if the idesc lines above >>> 388 1.38.6.6 nathanw # <<< are uncommented >>> 389 1.38.6.2 nathanw wdc0 at mainbus0 # A4000 & A1200 IDE bus 390 1.38.6.2 nathanw wd* at wdc? drive ? # + drives 391 1.38.6.2 nathanw atapibus* at wdc? channel ? # ATAPI bus 392 1.38.6.2 nathanw cd* at atapibus? drive ? # ATAPI CD-ROM drives 393 1.38.6.2 nathanw sd* at atapibus? drive ? # ATAPI disk drives 394 1.38.6.2 nathanw 395 1.38.6.2 nathanw pccard0 at mainbus0 396 1.38.6.2 nathanw pcmcia* at pccard0 397 1.38.6.2 nathanw com* at pcmcia? function ? # Modems and serial cards 398 1.38.6.2 nathanw pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 399 1.38.6.2 nathanw aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 400 1.38.6.2 nathanw wdc* at pcmcia? function ? 401 1.38.6.2 nathanw awi* at pcmcia? function ? # BayStack 650 (802.11FH) 402 1.38.6.2 nathanw ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 403 1.38.6.2 nathanw mbe* at pcmcia? function ? # MB8696x based Ethernet 404 1.38.6.2 nathanw ne* at pcmcia? function ? # NE2000-compatible Ethernet 405 1.38.6.2 nathanw sm* at pcmcia? function ? # Megahertz Ethernet 406 1.38.6.2 nathanw mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 407 1.38.6.2 nathanw com* at mhzc? 408 1.38.6.2 nathanw sm* at mhzc? 409 1.38.6.2 nathanw 410 1.38.6.6 nathanw 411 1.38.6.6 nathanw 412 1.38.6.6 nathanw 413 1.38.6.6 nathanw # each hard drive from low target to high 414 1.38.6.6 nathanw # will configure to the next available sd unit number 415 1.38.6.2 nathanw sd* at scsibus? target ? lun ? # scsi disks 416 1.38.6.2 nathanw st* at scsibus? target ? lun ? # scsi tapes 417 1.38.6.2 nathanw cd* at scsibus? target ? lun ? # scsi cds 418 1.38.6.2 nathanw ch* at scsibus? target ? lun ? # scsi autochangers 419 1.38.6.2 nathanw ss* at scsibus? target ? lun ? # scsi scanner 420 1.38.6.2 nathanw uk* at scsibus? target ? lun ? # scsi unknown 421 1.38.6.2 nathanw 422 1.38.6.2 nathanw pseudo-device loop # loopback network interface 423 1.38.6.2 nathanw pseudo-device sl 1 # SLIP network interfaces 424 1.38.6.2 nathanw pseudo-device ppp 1 # PPP network interfaces 425 1.38.6.3 nathanw pseudo-device pppoe # PPP over Ethernet (RFC 2516) 426 1.38.6.2 nathanw pseudo-device tun 1 # network tunnel line discipline 427 1.38.6.2 nathanw #pseudo-device gre 2 # generic L3 over IP tunnel 428 1.38.6.2 nathanw pseudo-device bpfilter 16 # Berkeley packet filter 429 1.38.6.2 nathanw pseudo-device ipfilter # IP Filter package 430 1.38.6.2 nathanw pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 431 1.38.6.2 nathanw #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 432 1.38.6.2 nathanw #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 433 1.38.6.2 nathanw pseudo-device vlan # IEEE 802.1q encapsulation 434 1.38.6.3 nathanw pseudo-device bridge # simple inter-network bridging 435 1.38.6.2 nathanw 436 1.38.6.2 nathanw pseudo-device view 4 # views (needed for grfcc) 437 1.38.6.2 nathanw pseudo-device pty # pseudo-terminals 438 1.38.6.6 nathanw pseudo-device clockctl # user control of clock subsystem 439 1.38.6.2 nathanw 440 1.38.6.2 nathanw pseudo-device vnd 4 # vnode pseudo-disks 441 1.38.6.2 nathanw pseudo-device ccd 4 # concatenated disk devices 442 1.38.6.3 nathanw pseudo-device raid 8 # RAIDframe disk driver 443 1.38.6.3 nathanw options RAID_AUTOCONFIG # auto-configuration of RAID components 444 1.38.6.6 nathanw # Options to enable various other RAIDframe RAID types. 445 1.38.6.6 nathanw # options RF_INCLUDE_EVENODD=1 446 1.38.6.6 nathanw # options RF_INCLUDE_RAID5_RS=1 447 1.38.6.6 nathanw # options RF_INCLUDE_PARITYLOGGING=1 448 1.38.6.6 nathanw # options RF_INCLUDE_CHAINDECLUSTER=1 449 1.38.6.6 nathanw # options RF_INCLUDE_INTERDECLUSTER=1 450 1.38.6.6 nathanw # options RF_INCLUDE_PARITY_DECLUSTERING=1 451 1.38.6.6 nathanw # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 452 1.38.6.2 nathanw 453 1.38.6.2 nathanw pseudo-device rnd # /dev/random and in-kernel generator 454 1.38.6.2 nathanw #options RND_COM # use "com" randomness as well (BROKEN) 455 1.38.6.2 nathanw 456 1.38.6.2 nathanw config netbsd root on ? type ? 457
Indexes created Fri Oct 31 11:10:07 GMT 2025