AMIGA revision 1.52
1 1.49 heinz # $NetBSD: AMIGA,v 1.52 2002/06/17 05:27:59 lukem Exp $ 2 1.9 is # 3 1.9 is # This file was automatically created. Changes will be 4 1.9 is # lost when running make in this directory. 5 1.9 is # 6 1.52 lukem # Created from: #NetBSD: GENERIC,v 1.181 2002/06/17 05:14:05 lukem Exp $ 7 1.9 is 8 1.40 jandberg #GENERIC machine description file 9 1.40 jandberg 10 1.40 jandberg #This machine description file is used to generate the default NetBSD 11 1.40 jandberg #kernel. The generic kernel does not include all options, subsystems 12 1.40 jandberg #and device drivers, but should be useful for most applications. 13 1.40 jandberg 14 1.40 jandberg #The machine description file can be customised for your specific 15 1.40 jandberg #machine to reduce the kernel size and improve its performance. 16 1.40 jandberg 17 1.40 jandberg #For further information on compiling NetBSD kernels, see the config(8) 18 1.40 jandberg #man page. 19 1.40 jandberg 20 1.40 jandberg #For further information on hardware support for this architecture, see 21 1.40 jandberg #the intro(4) man page. For further information about kernel options 22 1.40 jandberg #for this architecture, see the options(4) man page. For an explanation 23 1.40 jandberg #of each device driver in this file see the section 4 man page for the 24 1.40 jandberg #device. 25 1.9 is include "arch/amiga/conf/std.amiga" 26 1.9 is 27 1.50 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 28 1.50 atatat 29 1.52 lukem #ident "GENERIC-$Revision: 1.52 $" 30 1.25 mhitch 31 1.9 is maxusers 8 32 1.9 is options RTC_OFFSET=0 33 1.9 is 34 1.9 is #mainboards to support (in addition to Amiga) 35 1.9 is 36 1.9 is options BB060STUPIDROM # You need this, if you have a non-DraCo 37 1.39 lukem # MC68060 with an OS ROM up to (at least) 38 1.12 is # V40 (OS3.1) and want to boot with the 39 1.12 is # bootblock. 40 1.12 is # You do not need this if you have a DraCo, 41 1.12 is # have no 68060 or NEVER use the bootblock 42 1.39 lukem options P5PPC68KBOARD # Phase5 PPC/68K board support 43 1.9 is 44 1.9 is #processors this kernel should support 45 1.9 is 46 1.9 is options M68060 # support for 060 47 1.9 is options M060SP # MC68060 software support (Required for 060) 48 1.9 is 49 1.9 is options M68040 # support for 040 50 1.9 is options FPSP # MC68040 floating point support 51 1.9 is options M68030 # support for 030 52 1.9 is options M68020 # support for 020/851 53 1.9 is options FPU_EMULATE # FPU emulation 54 1.9 is 55 1.29 sommerfe #Networking options 56 1.29 sommerfe 57 1.9 is options INET # IP networking support (Required) 58 1.23 is options INET6 # IPV6 59 1.23 is #options IPSEC # IP security 60 1.23 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 61 1.23 is #options IPSEC_DEBUG # debug for IP security 62 1.9 is #options GATEWAY # Packet forwarding 63 1.9 is #options DIRECTED_BROADCAST # Broadcast across subnets 64 1.27 is 65 1.9 is #options MROUTING # Multicast routing 66 1.9 is options NS # XNS 67 1.9 is #options NSIP # XNS tunneling over IP 68 1.9 is options ISO,TPIP # OSI 69 1.29 sommerfe #options EON # OSI tunneling over IP 70 1.9 is options CCITT,LLC,HDLC # X.25 71 1.9 is options NETATALK # AppleTalk networking protocols 72 1.37 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 73 1.27 is 74 1.9 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 75 1.9 is options PPP_DEFLATE # Deflate compression support for PPP 76 1.9 is options PPP_FILTER # Active filter support for PPP (requires bpf) 77 1.9 is options PFIL_HOOKS # pfil(9) packet filter hooks 78 1.9 is options IPFILTER_LOG # ipmon(8) log support 79 1.9 is 80 1.9 is file-system FFS # Berkeley fast file system 81 1.15 tron file-system EXT2FS # second extended file system (linux) 82 1.9 is #file-system LFS # log-structured filesystem (experimental) 83 1.27 is 84 1.9 is file-system MFS # Memory based filesystem 85 1.27 is 86 1.9 is file-system NFS # Network File System client side code 87 1.9 is file-system ADOSFS # AmigaDOS file system 88 1.9 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 89 1.9 is file-system MSDOSFS # MS-DOS filesystem 90 1.27 is 91 1.27 is file-system KERNFS # kernel data-structure filesystem 92 1.27 is 93 1.9 is file-system FDESC # user file descriptor filesystem 94 1.9 is file-system NULLFS # loopback filesystem 95 1.23 is file-system OVERLAY # overlay filesystem 96 1.9 is #file-system PORTAL # Portal filesystem 97 1.9 is file-system PROCFS # /proc filesystem 98 1.9 is file-system UMAPFS # NULLFS + uid and gid remapping 99 1.9 is file-system UNION # union filesystem 100 1.9 is 101 1.9 is #Filesystem options 102 1.27 is 103 1.27 is #options FFS_EI # FFS Endian Independant support 104 1.27 is 105 1.9 is options QUOTA # User and group quotas in FFS 106 1.39 lukem options SOFTDEP # FFS soft updates support. 107 1.15 tron options NFSSERVER # Network File System server side code 108 1.27 is 109 1.15 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 110 1.15 tron # immutable) behave as system flags. 111 1.9 is 112 1.36 wiz #Compatibility options for various existing systems 113 1.9 is 114 1.37 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 115 1.9 is options COMPAT_43 # compatibility with 4.3BSD interfaces 116 1.9 is options COMPAT_09 # compatibility with NetBSD 0.9 117 1.9 is options COMPAT_10 # compatibility with NetBSD 1.0 118 1.9 is options COMPAT_12 # compatibility with NetBSD 1.2 119 1.9 is options COMPAT_13 # compatibility with NetBSD 1.3 120 1.21 augustss options COMPAT_14 # compatibility with NetBSD 1.4 121 1.10 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 122 1.15 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 123 1.9 is options COMPAT_NOMID # allow nonvalid machine id executables 124 1.10 is #options COMPAT_LINUX # Support to run Linux/m68k executables 125 1.45 is 126 1.45 is options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 127 1.46 is options COMPAT_AOUT_M68K # actually make some system calls work. 128 1.9 is 129 1.9 is #Support for System V IPC facilities. 130 1.9 is 131 1.9 is options SYSVSHM # System V-like shared memory 132 1.9 is options SYSVMSG # System V-like messages 133 1.9 is options SYSVSEM # System V-like semaphores 134 1.39 lukem #options SEMMNI=10 # number of semaphore identifiers 135 1.39 lukem #options SEMMNS=60 # number of semaphores in system 136 1.39 lukem #options SEMUME=10 # max number of undo entries per process 137 1.39 lukem #options SEMMNU=30 # number of undo structures in system 138 1.9 is 139 1.9 is #Support for various kernel options 140 1.9 is 141 1.9 is options KTRACE # system call tracing support 142 1.9 is options LKM # Loadable kernel modules 143 1.9 is options UCONSOLE # anyone can redirect a virtual console 144 1.27 is 145 1.42 jdolecek #options INSECURE # disable kernel security levels 146 1.42 jdolecek options SCSIVERBOSE # human readable SCSI error messages 147 1.49 heinz #options USERCONF # userconf(4) support 148 1.9 is 149 1.9 is options NTP # NTP phase/frequency locked loop 150 1.44 is #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 151 1.9 is 152 1.9 is #Misc. debugging options 153 1.9 is 154 1.9 is options DDB # Kernel debugger 155 1.9 is #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 156 1.9 is options DIAGNOSTIC # Extra kernel sanity checks 157 1.9 is #options DEBUG # Enable misc. kernel debugging code 158 1.9 is #options SYSCALL_DEBUG # debug all syscalls. 159 1.9 is #options SCSIDEBUG # Add SCSI debugging statements 160 1.51 thorpej #options PANICBUTTON # Forced crash via keypress (?) 161 1.9 is 162 1.9 is #Amiga specific options 163 1.9 is 164 1.10 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 165 1.12 is # first bank of RAM. (default: unlimited) 166 1.39 lukem #options NKPTADD=4 # set this for 4 additional KPT pages 167 1.39 lukem #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 168 1.12 is # per 16 MB (1<<24 bytes) of RAM 169 1.42 jdolecek # uncomment and decrease this, or uncomment and 170 1.39 lukem # increase NKPTADD if you get "out of PT pages" 171 1.39 lukem # panics. 172 1.12 is 173 1.9 is #ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 174 1.9 is #before the 10 secondinterval ends, or that KBDRESET does work at all. 175 1.9 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 176 1.9 is 177 1.9 is #These options improve performance with the built-in serial port 178 1.9 is #on slower Amigas. Try the larger buffers first then lev6_defer. 179 1.9 is #options SERIBUF_SIZE=4096 180 1.9 is #options SEROBUF_SIZE=32 181 1.9 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 182 1.9 is 183 1.9 is options RETINACONSOLE # enable code to allow retina to be console 184 1.9 is 185 1.9 is options ULOWELLCONSOLE # enable code to allow a2410 to be console 186 1.9 is options CL5426CONSOLE # Cirrus console 187 1.9 is options CV64CONSOLE # CyberVision console 188 1.9 is options TSENGCONSOLE # Tseng console 189 1.9 is options CV3DCONSOLE # CyberVision 64/3D console 190 1.9 is 191 1.9 is options GRF_ECS # Enhanced Chip Set 192 1.9 is options GRF_NTSC # NTSC 193 1.9 is options GRF_PAL # PAL 194 1.9 is options GRF_A2024 # Support for the A2024 195 1.9 is options GRF_AGA # AGA Chip Set 196 1.12 is options GRF_AGA_VGA # AGA VGAONLY timing 197 1.9 is options GRF_SUPER72 # AGA Super-72 198 1.9 is 199 1.9 is #options KFONT_8X11 # 8x11 font 200 1.9 is 201 1.49 heinz #select a font for the console according to the character set and keymap 202 1.49 heinz #you want to use 203 1.49 heinz options KFONT_CONS_ISO8859_1 204 1.49 heinz #options KFONT_CONS_ISO8859_2 205 1.49 heinz 206 1.9 is #This is how you would tell the kernel the A2410 oscillator frequencies: 207 1.12 is #The used frequencies are the defaults, and do not need option setting 208 1.9 is #options ULOWELL_OSC1=36000000 209 1.9 is #options ULOWELL_OSC2=66667000 210 1.9 is 211 1.9 is #This is how you specify the blitting speed, higher values may speed up blits 212 1.9 is #a littel bit. If you raise this value too much some trash may appear. 213 1.9 is #the commented version is the default. 214 1.9 is #options RH_MEMCLK=61000000 215 1.10 is #this option enables the 64 bit sprite which does not work 216 1.9 is #for quite a few people. E.g. The cursor sprite will turn to a block 217 1.9 is #when moved to the top of the screen in X. 218 1.9 is #options RH_64BIT_SPRITE 219 1.9 is #enables fast scroll code appears to now work on 040 systems. 220 1.9 is #options RETINA_SPEED_HACK 221 1.9 is #enables the Hardwarecursor which does not work on some systems. 222 1.9 is #options RH_HARDWARECURSOR 223 1.9 is 224 1.40 jandberg #wscons aware interface to amiga custom chips. 225 1.41 aymeric #If you enable it enable also wskbd. 226 1.35 is 227 1.35 is #amidisplaycc0 at mainbus0 # wscons interface to custom chips 228 1.35 is #wsdisplay0 at amidisplaycc0 console ? 229 1.40 jandberg #options WSEMUL_VT100 230 1.40 jandberg #options FONT_BOLD8x16 231 1.40 jandberg #options FONT_VT220L8x10 232 1.35 is 233 1.9 is grfcc0 at mainbus0 # custom chips 234 1.9 is grfrt0 at zbus0 # retina II 235 1.9 is 236 1.9 is grfrh0 at zbus0 # retina III 237 1.9 is 238 1.49 heinz grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 239 1.9 is grful0 at zbus0 # A2410 240 1.9 is grfcv0 at zbus0 # CyberVision 64 241 1.9 is grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 242 1.9 is grfcv3d0 at zbus0 # CyberVision 64/3D 243 1.9 is 244 1.9 is grf0 at grfcc0 245 1.9 is grf1 at grfrt0 246 1.9 is 247 1.9 is grf2 at grfrh0 248 1.9 is 249 1.9 is grf3 at grfcl? 250 1.9 is grf4 at grful0 251 1.9 is grf5 at grfcv0 252 1.9 is grf6 at grfet? 253 1.9 is grf7 at grfcv3d0 254 1.9 is 255 1.10 is ite0 at grf0 # terminal emulators for grfs 256 1.10 is ite1 at grf1 # terminal emulators for grfs 257 1.9 is 258 1.10 is ite2 at grf2 # terminal emulators for grfs 259 1.9 is 260 1.10 is ite3 at grf3 # terminal emulators for grfs 261 1.10 is ite4 at grf4 # terminal emulators for grfs 262 1.10 is ite5 at grf5 # terminal emulators for grfs 263 1.10 is ite6 at grf6 # terminal emulators for grfs 264 1.10 is ite7 at grf7 # terminal emulators for grfs 265 1.9 is 266 1.9 is msc0 at zbus0 # A2232 MSC multiport serial. 267 1.9 is mfc0 at zbus0 # MultiFaceCard I/O board 268 1.9 is mfcs0 at mfc0 unit 0 # MFC serial 269 1.9 is mfcs1 at mfc0 unit 1 # MFC serial 270 1.9 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 271 1.9 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 272 1.9 is #mfcs2 at mfc1 unit 0 273 1.9 is #mfcs3 at mfc1 unit 1 274 1.9 is #mfcp1 at mfc1 unit 0 275 1.9 is 276 1.16 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 277 1.9 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 278 1.9 is com* at hyper? port ? # Hypercom3/4 serial ports 279 1.16 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 280 1.9 is 281 1.39 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 282 1.39 lukem #options IOBZCLOCK=24000000 # if needed. 283 1.35 is 284 1.35 is iobl* at zbus? # zbus IOBlix 285 1.35 is com* at iobl? port ? # IOBlix serial ports 286 1.35 is lpt* at iobl? port ? # IOBlix parallel ports 287 1.35 is 288 1.35 is #Keyboard device. Optionally can attach a wskbd. 289 1.35 is #wskbd works together with a wsdisplay so enable them both if you will. 290 1.35 is #Don't enable wskbd if you use ite. 291 1.50 atatat # 292 1.35 is #XXX in std.amiga: kbd0 at mainbus0 293 1.35 is #wskbd0 at kbd0 console ? 294 1.27 is 295 1.12 is #Amiga Mainboard devices (sans graphics and keyboard) 296 1.9 is 297 1.9 is ser0 at mainbus0 # Amiga onboard serial 298 1.9 is par0 at mainbus0 # Amiga onboard parallel 299 1.9 is ms* at mainbus0 # Amiga mice 300 1.9 is fdc0 at mainbus0 # Amiga FDC 301 1.9 is fd* at fdc0 unit ? # floppy disks on the later 302 1.9 is a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 303 1.9 is a2kbbc0 at mainbus0 # A2000 battery backed clock 304 1.44 is 305 1.9 is aucc* at mainbus0 # Amiga CC audio 306 1.9 is audio* at aucc? 307 1.9 is 308 1.9 is #Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 309 1.9 is 310 1.39 lukem #Alas, Melody-Z2 dont configure in the DraCo bus. 311 1.9 is melody* at zbus0 # Melody MPEG audio decoder 312 1.9 is audio* at melody? 313 1.38 is 314 1.38 is repulse* at zbus0 # ALiENDESiGN Repulse 315 1.38 is audio* at repulse? 316 1.43 is 317 1.43 is toccata* at zbus0 # MacroSystem GmbH Toccata 318 1.43 is audio* at toccata? 319 1.9 is 320 1.9 is #Ethernet cards: 321 1.9 is le* at zbus0 # A2065, Ameristar, Ariadne 322 1.33 is ne* at zbus0 # AriadneII, X-surf 323 1.17 is ed* at zbus0 # Hydra, ASDG LanRover 324 1.17 is es* at zbus0 # CEI A4066 EthernetPLUS 325 1.17 is qn* at zbus0 # Quicknet 326 1.9 is 327 1.9 is bah* at zbus0 # C=/Ameristar A2060 / 560 328 1.9 is 329 1.9 is #Greater Valley Product Bus 330 1.9 is gvpbus* at zbus0 331 1.9 is 332 1.9 is #scsi stuff, all possible 333 1.9 is gtsc0 at gvpbus? # GVP series II scsi 334 1.9 is scsibus* at gtsc0 335 1.9 is ahsc0 at mainbus0 # A3000 scsi 336 1.9 is scsibus* at ahsc0 337 1.9 is atzsc0 at zbus0 # A2091 scsi 338 1.9 is scsibus* at atzsc0 339 1.9 is wstsc0 at zbus0 # Wordsync II scsi 340 1.9 is scsibus* at wstsc0 341 1.9 is ivsc0 at zbus0 # IVS scsi 342 1.9 is scsibus* at ivsc0 343 1.9 is mlhsc0 at zbus0 # Hacker scsi 344 1.9 is scsibus* at mlhsc0 345 1.9 is otgsc0 at zbus0 # 12 gauge scsi 346 1.9 is scsibus* at otgsc0 347 1.9 is zssc0 at zbus0 # Zeus scsi 348 1.9 is scsibus* at zssc0 349 1.9 is mgnsc0 at zbus0 # Magnum scsi 350 1.9 is scsibus* at mgnsc0 351 1.9 is wesc0 at zbus0 # Warp Engine scsi 352 1.9 is scsibus* at wesc0 353 1.9 is afsc0 at zbus0 # A4091 scsi 354 1.9 is scsibus* at afsc0 355 1.9 is aftsc0 at mainbus0 # A4000T scsi 356 1.9 is scsibus* at aftsc0 357 1.9 is flsc0 at zbus0 # FastlaneZ3 scsi 358 1.9 is scsibus* at flsc0 359 1.39 lukem bzsc0 at zbus0 # Blizzard 1230 I,II scsi 360 1.9 is scsibus* at bzsc0 361 1.39 lukem bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 362 1.9 is scsibus* at bzivsc0 363 1.9 is bztzsc0 at zbus0 # Blizzard 2060 scsi 364 1.9 is scsibus* at bztzsc0 365 1.9 is cbsc0 at zbus0 # CyberSCSI I 366 1.9 is scsibus* at cbsc0 367 1.9 is cbiisc0 at zbus0 # CyberSCSI II 368 1.9 is scsibus* at cbiisc0 369 1.10 is cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 370 1.10 is scsibus* at cbiiisc0 371 1.9 is empsc0 at zbus0 # Emplant scsi 372 1.9 is scsibus* at empsc0 373 1.34 is #idesc0 at mainbus0 # A4000 & A1200 IDE 374 1.34 is #scsibus* at idesc0 375 1.25 mhitch 376 1.34 is #<<< comment out the wdc/atapibus entries below if the idesc lines above >>> 377 1.25 mhitch #<<< are uncommented >>> 378 1.34 is wdc0 at mainbus0 # A4000 & A1200 IDE bus 379 1.34 is wd* at wdc? drive ? # + drives 380 1.34 is atapibus* at wdc? channel ? # ATAPI bus 381 1.34 is cd* at atapibus? drive ? # ATAPI CD-ROM drives 382 1.34 is sd* at atapibus? drive ? # ATAPI disk drives 383 1.34 is 384 1.34 is pccard0 at mainbus0 385 1.34 is pcmcia* at pccard0 386 1.34 is com* at pcmcia? function ? # Modems and serial cards 387 1.34 is pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 388 1.34 is aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 389 1.34 is wdc* at pcmcia? function ? 390 1.34 is awi* at pcmcia? function ? # BayStack 650 (802.11FH) 391 1.34 is ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 392 1.34 is mbe* at pcmcia? function ? # MB8696x based Ethernet 393 1.34 is ne* at pcmcia? function ? # NE2000-compatible Ethernet 394 1.34 is sm* at pcmcia? function ? # Megahertz Ethernet 395 1.39 lukem mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 396 1.34 is com* at mhzc? 397 1.34 is sm* at mhzc? 398 1.9 is 399 1.9 is #each hard drive from low target to high 400 1.9 is #will configure to the next available sd unit number 401 1.9 is sd* at scsibus? target ? lun ? # scsi disks 402 1.9 is st* at scsibus? target ? lun ? # scsi tapes 403 1.10 is cd* at scsibus? target ? lun ? # scsi cds 404 1.29 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 405 1.29 sommerfe 406 1.9 is ss* at scsibus? target ? lun ? # scsi scanner 407 1.9 is uk* at scsibus? target ? lun ? # scsi unknown 408 1.9 is 409 1.9 is pseudo-device loop # loopback network interface 410 1.9 is pseudo-device sl 1 # SLIP network interfaces 411 1.9 is pseudo-device ppp 1 # PPP network interfaces 412 1.40 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 413 1.9 is pseudo-device tun 1 # network tunnel line discipline 414 1.9 is #pseudo-device gre 2 # generic L3 over IP tunnel 415 1.9 is pseudo-device bpfilter 16 # Berkeley packet filter 416 1.9 is pseudo-device ipfilter # IP Filter package 417 1.23 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 418 1.23 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 419 1.29 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 420 1.33 is pseudo-device vlan # IEEE 802.1q encapsulation 421 1.40 jandberg pseudo-device bridge # simple inter-network bridging 422 1.9 is 423 1.19 is pseudo-device view 4 # views (needed for grfcc) 424 1.31 jdolecek pseudo-device pty # pseudo-terminals 425 1.52 lukem pseudo-device clockctl # user control of clock subsystem 426 1.9 is 427 1.9 is pseudo-device vnd 4 # vnode pseudo-disks 428 1.9 is pseudo-device ccd 4 # concatenated disk devices 429 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 430 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 431 1.42 jdolecek #Options to enable various other RAIDframe RAID types. 432 1.42 jdolecek #options RF_INCLUDE_EVENODD=1 433 1.42 jdolecek #options RF_INCLUDE_RAID5_RS=1 434 1.42 jdolecek #options RF_INCLUDE_PARITYLOGGING=1 435 1.42 jdolecek #options RF_INCLUDE_CHAINDECLUSTER=1 436 1.42 jdolecek #options RF_INCLUDE_INTERDECLUSTER=1 437 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING=1 438 1.42 jdolecek #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 439 1.9 is 440 1.39 lukem pseudo-device rnd # /dev/random and in-kernel generator 441 1.39 lukem #options RND_COM # use "com" randomness as well (BROKEN) 442 1.9 is 443 1.9 is config netbsd root on ? type ? 444
Indexes created Fri Oct 03 02:09:57 GMT 2025